diff options
Diffstat (limited to 'arch/arm')
241 files changed, 1556 insertions, 779 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index fa0cdab..e9da084 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -242,15 +242,8 @@ all: $(KBUILD_IMAGE) boot := arch/arm/boot -# Update machine arch and proc symlinks if something which affects -# them changed. We use .arch to indicate when they were updated -# last, otherwise make uses the target directory mtime. - -archprepare: maketools - -PHONY += maketools FORCE -maketools: include/linux/version.h FORCE - $(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h +archprepare: + $(Q)$(MAKE) $(build)=arch/arm/tools include/generated/mach-types.h # Convert bzImage to zImage bzImage: zImage @@ -261,9 +254,6 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -CLEAN_FILES += include/asm-arm/mach-types.h \ - include/asm-arm/arch include/asm-arm/.arch - # We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 5a375e5..cc32c1e 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -308,15 +308,11 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr, memcpy(ptr, buf->safe, size); /* - * DMA buffers must have the same cache properties - * as if they were really used for DMA - which means - * data must be written back to RAM. Note that - * we don't use dmac_flush_range() here for the - * bidirectional case because we know the cache - * lines will be coherent with the data written. + * Since we may have written to a page cache page, + * we need to ensure that the data will be coherent + * with user mappings. */ - dmac_clean_range(ptr, ptr + size); - outer_clean_range(__pa(ptr), __pa(ptr) + size); + __cpuc_flush_dcache_area(ptr, size); } free_safe_buffer(dev->archdata.dmabounce, buf); } diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig index 1cab4e7..6e32a85 100644 --- a/arch/arm/configs/acs5k_defconfig +++ b/arch/arm/configs/acs5k_defconfig @@ -187,7 +187,6 @@ CONFIG_MACH_ACS5K=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM922T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig index 8e3d084..b34b1ea 100644 --- a/arch/arm/configs/acs5k_tiny_defconfig +++ b/arch/arm/configs/acs5k_tiny_defconfig @@ -186,7 +186,6 @@ CONFIG_MACH_ACS5K=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM922T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig index f7a272c..64fe7f1 100644 --- a/arch/arm/configs/afeb9260_defconfig +++ b/arch/arm/configs/afeb9260_defconfig @@ -227,7 +227,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig index 5e68420..30927ca 100644 --- a/arch/arm/configs/am200epdkit_defconfig +++ b/arch/arm/configs/am200epdkit_defconfig @@ -189,7 +189,6 @@ CONFIG_PXA25x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/am3517_evm_defconfig b/arch/arm/configs/am3517_evm_defconfig index ad54e92..abe9966 100644 --- a/arch/arm/configs/am3517_evm_defconfig +++ b/arch/arm/configs/am3517_evm_defconfig @@ -233,7 +233,6 @@ CONFIG_MACH_OMAP3517EVM=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig index e8f7380b..3b3a3775 100644 --- a/arch/arm/configs/ams_delta_defconfig +++ b/arch/arm/configs/ams_delta_defconfig @@ -210,7 +210,6 @@ CONFIG_OMAP_ARM_150MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig index c66dd39..daa75bc 100644 --- a/arch/arm/configs/assabet_defconfig +++ b/arch/arm/configs/assabet_defconfig @@ -101,7 +101,6 @@ CONFIG_SA1100_ASSABET=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig index bc6bd9f..b1ab50b 100644 --- a/arch/arm/configs/at91cap9adk_defconfig +++ b/arch/arm/configs/at91cap9adk_defconfig @@ -181,7 +181,6 @@ CONFIG_AT91_TIMER_HZ=100 # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index c97e102..1fffec8 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -130,7 +130,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index 9f7a99a..c846a79 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -129,7 +129,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index 98e2f3d..472ea11 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -188,7 +188,6 @@ CONFIG_AT91_TIMER_HZ=100 # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig index 1494561..4ecde42 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -181,7 +181,6 @@ CONFIG_AT91_TIMER_HZ=100 # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig index 21599f3..9b792b6 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263ek_defconfig @@ -181,7 +181,6 @@ CONFIG_AT91_TIMER_HZ=100 # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig index 7e018a0..64ce106 100644 --- a/arch/arm/configs/at91sam9g20ek_defconfig +++ b/arch/arm/configs/at91sam9g20ek_defconfig @@ -187,7 +187,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig index e2df81a..90e48bf 100644 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ b/arch/arm/configs/at91sam9rlek_defconfig @@ -179,7 +179,6 @@ CONFIG_AT91_TIMER_HZ=100 # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig index a19e824..6315534 100644 --- a/arch/arm/configs/ateb9200_defconfig +++ b/arch/arm/configs/ateb9200_defconfig @@ -132,7 +132,6 @@ CONFIG_MACH_ATEB9200=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index f264846..b175b6b 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -103,7 +103,6 @@ CONFIG_SA1100_BADGE4=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig index bcc0bac..1e12167 100644 --- a/arch/arm/configs/bcmring_defconfig +++ b/arch/arm/configs/bcmring_defconfig @@ -181,7 +181,6 @@ CONFIG_BCM_ZRELADDR=0x8000 # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig index 8448108..eef33de 100644 --- a/arch/arm/configs/cam60_defconfig +++ b/arch/arm/configs/cam60_defconfig @@ -196,7 +196,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig index d392833..b6a7063 100644 --- a/arch/arm/configs/carmeva_defconfig +++ b/arch/arm/configs/carmeva_defconfig @@ -97,7 +97,6 @@ CONFIG_MACH_CARMEVA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig index 2b4c066..d662cab 100644 --- a/arch/arm/configs/cerfcube_defconfig +++ b/arch/arm/configs/cerfcube_defconfig @@ -105,7 +105,6 @@ CONFIG_SA1100_CERF_FLASH_16MB=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig index e42c5c8..893cd26 100644 --- a/arch/arm/configs/cm_t35_defconfig +++ b/arch/arm/configs/cm_t35_defconfig @@ -236,7 +236,6 @@ CONFIG_MACH_CM_T35=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig index 797b790..47d22d0 100644 --- a/arch/arm/configs/cm_x2xx_defconfig +++ b/arch/arm/configs/cm_x2xx_defconfig @@ -205,7 +205,6 @@ CONFIG_PXA_SSP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index a017086..a334069 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -247,7 +247,6 @@ CONFIG_PLAT_PXA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSC3=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig index 4cf3bde..c962870 100644 --- a/arch/arm/configs/colibri_pxa270_defconfig +++ b/arch/arm/configs/colibri_pxa270_defconfig @@ -204,7 +204,6 @@ CONFIG_PXA27x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig index 4774a36..11fdb5a 100644 --- a/arch/arm/configs/colibri_pxa300_defconfig +++ b/arch/arm/configs/colibri_pxa300_defconfig @@ -212,7 +212,6 @@ CONFIG_PXA3xx=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSC3=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index 1aa6224..26e458d 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -125,7 +125,6 @@ CONFIG_SA1100_COLLIE=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index d6cd165..5e4069f 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -214,7 +214,6 @@ CONFIG_PXA_HAVE_BOARD_IRQS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig index 601e7f3..c9137aa 100644 --- a/arch/arm/configs/cpu9260_defconfig +++ b/arch/arm/configs/cpu9260_defconfig @@ -229,7 +229,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig index b5b9cbb..d234479 100644 --- a/arch/arm/configs/cpu9g20_defconfig +++ b/arch/arm/configs/cpu9g20_defconfig @@ -219,7 +219,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig index 4901827..1f8dda6 100644 --- a/arch/arm/configs/cpuat91_defconfig +++ b/arch/arm/configs/cpuat91_defconfig @@ -230,7 +230,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig index 29f68c2..f095040 100644 --- a/arch/arm/configs/csb337_defconfig +++ b/arch/arm/configs/csb337_defconfig @@ -193,7 +193,6 @@ CONFIG_AT91_TIMER_HZ=128 # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig index f7b60ce..5071540 100644 --- a/arch/arm/configs/csb637_defconfig +++ b/arch/arm/configs/csb637_defconfig @@ -215,7 +215,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index 50bd25a..e14c99c 100644 --- a/arch/arm/configs/da8xx_omapl_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -225,7 +225,6 @@ CONFIG_DAVINCI_RESET_CLOCKS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index bd656e8..625035f 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -223,7 +223,6 @@ CONFIG_DAVINCI_RESET_CLOCKS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index b3a4916..b7b2ab0 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -186,7 +186,6 @@ CONFIG_PLAT_ORION=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig index afcfff6..d5e8279 100644 --- a/arch/arm/configs/ebsa110_defconfig +++ b/arch/arm/configs/ebsa110_defconfig @@ -83,7 +83,6 @@ CONFIG_ARCH_EBSA110=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA110=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig index ca52073..25dd53b 100644 --- a/arch/arm/configs/ecbat91_defconfig +++ b/arch/arm/configs/ecbat91_defconfig @@ -186,7 +186,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/edb7211_defconfig b/arch/arm/configs/edb7211_defconfig index 6ba7355..e3a6cd3 100644 --- a/arch/arm/configs/edb7211_defconfig +++ b/arch/arm/configs/edb7211_defconfig @@ -90,7 +90,6 @@ CONFIG_ARCH_EP7211=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM720T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_LV4T=y diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig index e9955b7..2bee932 100644 --- a/arch/arm/configs/em_x270_defconfig +++ b/arch/arm/configs/em_x270_defconfig @@ -202,7 +202,6 @@ CONFIG_PXA_SSP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 3fb083b..35d735e 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -198,7 +198,6 @@ CONFIG_EP93XX_EARLY_UART1=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig index b6c5cbb..74baf57 100644 --- a/arch/arm/configs/eseries_pxa_defconfig +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -203,7 +203,6 @@ CONFIG_PXA_HAVE_BOARD_IRQS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index 492f29a..9e9057c 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -240,7 +240,6 @@ CONFIG_PLAT_PXA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig index 6ace512..04d9793 100644 --- a/arch/arm/configs/footbridge_defconfig +++ b/arch/arm/configs/footbridge_defconfig @@ -95,7 +95,6 @@ CONFIG_ARCH_EBSA285=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA110=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/fortunet_defconfig b/arch/arm/configs/fortunet_defconfig index 65dc73a..d58142b 100644 --- a/arch/arm/configs/fortunet_defconfig +++ b/arch/arm/configs/fortunet_defconfig @@ -88,7 +88,6 @@ CONFIG_ARCH_FORTUNET=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM720T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_LV4T=y diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig index efa78e1..a8ad8fb 100644 --- a/arch/arm/configs/h3600_defconfig +++ b/arch/arm/configs/h3600_defconfig @@ -205,7 +205,6 @@ CONFIG_SA1100_H3600=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig index 649baa3..5bb7372 100644 --- a/arch/arm/configs/h5000_defconfig +++ b/arch/arm/configs/h5000_defconfig @@ -206,7 +206,6 @@ CONFIG_PXA25x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/h7201_defconfig b/arch/arm/configs/h7201_defconfig index 116920a..09a6c6a 100644 --- a/arch/arm/configs/h7201_defconfig +++ b/arch/arm/configs/h7201_defconfig @@ -87,7 +87,6 @@ CONFIG_CPU_H7201=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM720T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_LV4T=y diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig index 0e739af..fedc52b 100644 --- a/arch/arm/configs/h7202_defconfig +++ b/arch/arm/configs/h7202_defconfig @@ -91,7 +91,6 @@ CONFIG_CPU_H7202=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM720T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_LV4T=y diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig index db0708d..2da1acf 100644 --- a/arch/arm/configs/hackkit_defconfig +++ b/arch/arm/configs/hackkit_defconfig @@ -103,7 +103,6 @@ CONFIG_SA1100_HACKKIT=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig index 1b39691..e0ef0d1 100644 --- a/arch/arm/configs/htcherald_defconfig +++ b/arch/arm/configs/htcherald_defconfig @@ -241,7 +241,6 @@ CONFIG_OMAP_ARM_195MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v4T=y diff --git a/arch/arm/configs/igep0020_defconfig b/arch/arm/configs/igep0020_defconfig index c97f8d0..a192248 100644 --- a/arch/arm/configs/igep0020_defconfig +++ b/arch/arm/configs/igep0020_defconfig @@ -238,7 +238,6 @@ CONFIG_MACH_IGEP0020=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 3ce96e6..6b0d043 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -92,7 +92,6 @@ CONFIG_ARCH_INTEGRATOR_AP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM720T=y CONFIG_CPU_ARM920T=y # CONFIG_CPU_ARM922T is not set diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig index 89c1776..3c040cc 100644 --- a/arch/arm/configs/iop13xx_defconfig +++ b/arch/arm/configs/iop13xx_defconfig @@ -163,7 +163,6 @@ CONFIG_PLAT_IOP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSC3=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index d70177b..62a8549 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -168,7 +168,6 @@ CONFIG_PLAT_IOP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig index ed2d59d..0bc23ec 100644 --- a/arch/arm/configs/iop33x_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -198,7 +198,6 @@ CONFIG_PLAT_IOP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig index 57526c1..8b5b576 100644 --- a/arch/arm/configs/ixp2000_defconfig +++ b/arch/arm/configs/ixp2000_defconfig @@ -151,7 +151,6 @@ CONFIG_ARCH_IXDP2X01=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig index ef97561..59c11c9 100644 --- a/arch/arm/configs/ixp23xx_defconfig +++ b/arch/arm/configs/ixp23xx_defconfig @@ -145,7 +145,6 @@ CONFIG_MACH_ROADRUNNER=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSC3=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 95cd8df..a907ad5 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -189,7 +189,6 @@ CONFIG_IXP4XX_NPE=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig index df9bfbe..d1f1646 100644 --- a/arch/arm/configs/jornada720_defconfig +++ b/arch/arm/configs/jornada720_defconfig @@ -202,7 +202,6 @@ CONFIG_SA1100_SSP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig index 9f92fc5..f661e76 100644 --- a/arch/arm/configs/kafa_defconfig +++ b/arch/arm/configs/kafa_defconfig @@ -132,7 +132,6 @@ CONFIG_MACH_KAFA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig index 605a846..668ba59 100644 --- a/arch/arm/configs/kb9202_defconfig +++ b/arch/arm/configs/kb9202_defconfig @@ -230,7 +230,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index bcfade3..5fc44c9 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -201,7 +201,6 @@ CONFIG_PLAT_ORION=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_FEROCEON=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_CPU_32v5=y diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig index d25c41b..e6f2276 100644 --- a/arch/arm/configs/ks8695_defconfig +++ b/arch/arm/configs/ks8695_defconfig @@ -186,7 +186,6 @@ CONFIG_MACH_DSM320=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM922T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig index 56ae568..af75951 100644 --- a/arch/arm/configs/lart_defconfig +++ b/arch/arm/configs/lart_defconfig @@ -99,7 +99,6 @@ CONFIG_SA1100_LART=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig index b720fcf..6df7b14 100644 --- a/arch/arm/configs/loki_defconfig +++ b/arch/arm/configs/loki_defconfig @@ -174,7 +174,6 @@ CONFIG_PLAT_ORION=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_FEROCEON=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_CPU_32v5=y diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig index 1a38d8e..aeb7686 100644 --- a/arch/arm/configs/lpd270_defconfig +++ b/arch/arm/configs/lpd270_defconfig @@ -143,7 +143,6 @@ CONFIG_PXA27x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/lpd7a400_defconfig b/arch/arm/configs/lpd7a400_defconfig index f8ac29d..6116fee 100644 --- a/arch/arm/configs/lpd7a400_defconfig +++ b/arch/arm/configs/lpd7a400_defconfig @@ -95,7 +95,6 @@ CONFIG_LPD7A40X_CPLD_SSP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM922T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig index 7a2e932..142cccd 100644 --- a/arch/arm/configs/lpd7a404_defconfig +++ b/arch/arm/configs/lpd7a404_defconfig @@ -117,7 +117,6 @@ CONFIG_ARCH_LH7A404=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM922T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig index e544bfb..75c6293 100644 --- a/arch/arm/configs/lubbock_defconfig +++ b/arch/arm/configs/lubbock_defconfig @@ -92,7 +92,6 @@ CONFIG_PXA25x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/lusl7200_defconfig b/arch/arm/configs/lusl7200_defconfig index 42f6a77..c1a1fb0 100644 --- a/arch/arm/configs/lusl7200_defconfig +++ b/arch/arm/configs/lusl7200_defconfig @@ -82,7 +82,6 @@ CONFIG_ARCH_L7200=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM720T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_LV4T=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index 957fd5f..8e9a723 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -204,7 +204,6 @@ CONFIG_PXA_HAVE_BOARD_IRQS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig index cc8c95b..1cddb61 100644 --- a/arch/arm/configs/mainstone_defconfig +++ b/arch/arm/configs/mainstone_defconfig @@ -93,7 +93,6 @@ CONFIG_IWMMXT=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index e49ed40..d2a90eb 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -256,7 +256,6 @@ CONFIG_MACH_MINI2440=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index cc3b06e..fe25e3b 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -155,7 +155,6 @@ CONFIG_MSM_SMD=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index 398274b..6afa2c1 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -181,7 +181,6 @@ CONFIG_PLAT_ORION=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_FEROCEON=y CONFIG_CPU_FEROCEON_OLD_ID=y CONFIG_CPU_32v5=y diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig index 0200d67..f575070 100644 --- a/arch/arm/configs/mx1_defconfig +++ b/arch/arm/configs/mx1_defconfig @@ -190,7 +190,6 @@ CONFIG_MXC_IRQ_PRIOR=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/mx1ads_defconfig b/arch/arm/configs/mx1ads_defconfig index 577d7e1..3cabbb6 100644 --- a/arch/arm/configs/mx1ads_defconfig +++ b/arch/arm/configs/mx1ads_defconfig @@ -88,7 +88,6 @@ CONFIG_ARCH_MX1ADS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig index 4b04290..1ecd627 100644 --- a/arch/arm/configs/mx21_defconfig +++ b/arch/arm/configs/mx21_defconfig @@ -185,7 +185,6 @@ CONFIG_MXC_PWM=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig index 75263a8..edfdd6f 100644 --- a/arch/arm/configs/mx27_defconfig +++ b/arch/arm/configs/mx27_defconfig @@ -207,7 +207,6 @@ CONFIG_MXC_PWM=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/mx31pdk_defconfig b/arch/arm/configs/mx31pdk_defconfig index 95ffc0d..d409537 100644 --- a/arch/arm/configs/mx31pdk_defconfig +++ b/arch/arm/configs/mx31pdk_defconfig @@ -173,7 +173,6 @@ CONFIG_MACH_MX31_3DS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index 7734cca..8a06bc6 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -218,7 +218,6 @@ CONFIG_ARCH_MXC_IOMUX_V3=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig index a1657b7..75cae18 100644 --- a/arch/arm/configs/n770_defconfig +++ b/arch/arm/configs/n770_defconfig @@ -210,7 +210,6 @@ CONFIG_OMAP_ARM_216MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig index 264f52b..e6f667c 100644 --- a/arch/arm/configs/n8x0_defconfig +++ b/arch/arm/configs/n8x0_defconfig @@ -232,7 +232,6 @@ CONFIG_MACH_NOKIA_N8X0=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig index e0e4e98..d165c75 100644 --- a/arch/arm/configs/neocore926_defconfig +++ b/arch/arm/configs/neocore926_defconfig @@ -218,7 +218,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig index 36cd62e..171265e 100644 --- a/arch/arm/configs/neponset_defconfig +++ b/arch/arm/configs/neponset_defconfig @@ -103,7 +103,6 @@ CONFIG_ASSABET_NEPONSET=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig index c1a63a3..78f58a9 100644 --- a/arch/arm/configs/netwinder_defconfig +++ b/arch/arm/configs/netwinder_defconfig @@ -89,7 +89,6 @@ CONFIG_FOOTBRIDGE_HOST=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA110=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig index 61d0fc5..2a97e36 100644 --- a/arch/arm/configs/netx_defconfig +++ b/arch/arm/configs/netx_defconfig @@ -122,7 +122,6 @@ CONFIG_MACH_NXEB500HMI=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index 600cb27..92d9086 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -191,7 +191,6 @@ CONFIG_I2C_BITBANG_8815NHK=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/nuc910_defconfig b/arch/arm/configs/nuc910_defconfig index 5245655..f80848a 100644 --- a/arch/arm/configs/nuc910_defconfig +++ b/arch/arm/configs/nuc910_defconfig @@ -180,7 +180,6 @@ CONFIG_MACH_W90P910EVB=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig index df1de9b..97300ec 100644 --- a/arch/arm/configs/nuc950_defconfig +++ b/arch/arm/configs/nuc950_defconfig @@ -201,7 +201,6 @@ CONFIG_MACH_W90P950EVB=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig index 4b2cd9e..aa7e128 100644 --- a/arch/arm/configs/nuc960_defconfig +++ b/arch/arm/configs/nuc960_defconfig @@ -201,7 +201,6 @@ CONFIG_MACH_W90N960EVB=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig index 9cfae37..c7999f5 100644 --- a/arch/arm/configs/omap3_beagle_defconfig +++ b/arch/arm/configs/omap3_beagle_defconfig @@ -213,7 +213,6 @@ CONFIG_MACH_OMAP3_BEAGLE=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig index 2af28ea..367be98 100644 --- a/arch/arm/configs/omap3_defconfig +++ b/arch/arm/configs/omap3_defconfig @@ -245,7 +245,6 @@ CONFIG_MACH_OMAP_3630SDP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig index e190fc8..86cc4be 100644 --- a/arch/arm/configs/omap3_evm_defconfig +++ b/arch/arm/configs/omap3_evm_defconfig @@ -220,7 +220,6 @@ CONFIG_MACH_OMAP3EVM=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig index b7a8d9f..f74eb9a 100644 --- a/arch/arm/configs/omap3_pandora_defconfig +++ b/arch/arm/configs/omap3_pandora_defconfig @@ -211,7 +211,6 @@ CONFIG_MACH_OMAP3_PANDORA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig index 7c8515e..74fe6be 100644 --- a/arch/arm/configs/omap3_touchbook_defconfig +++ b/arch/arm/configs/omap3_touchbook_defconfig @@ -246,7 +246,6 @@ CONFIG_MACH_OMAP3_TOUCHBOOK=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig index 640e9af..45b4eba 100644 --- a/arch/arm/configs/omap_2430sdp_defconfig +++ b/arch/arm/configs/omap_2430sdp_defconfig @@ -197,7 +197,6 @@ CONFIG_MACH_OMAP_2430SDP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig index 592457c..bb2917e 100644 --- a/arch/arm/configs/omap_3430sdp_defconfig +++ b/arch/arm/configs/omap_3430sdp_defconfig @@ -232,7 +232,6 @@ CONFIG_MACH_OMAP_3430SDP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig index e836c8a..d25c3d4 100644 --- a/arch/arm/configs/omap_3630sdp_defconfig +++ b/arch/arm/configs/omap_3630sdp_defconfig @@ -236,7 +236,6 @@ CONFIG_MACH_OMAP_3630SDP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig index 2319113..3de640a 100644 --- a/arch/arm/configs/omap_4430sdp_defconfig +++ b/arch/arm/configs/omap_4430sdp_defconfig @@ -220,7 +220,6 @@ CONFIG_MACH_OMAP_4430SDP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig index ac7adf3..cc86342 100644 --- a/arch/arm/configs/omap_apollon_2420_defconfig +++ b/arch/arm/configs/omap_apollon_2420_defconfig @@ -196,7 +196,6 @@ CONFIG_MACH_OMAP_APOLLON=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig index ccdc661..61744e5 100644 --- a/arch/arm/configs/omap_generic_1510_defconfig +++ b/arch/arm/configs/omap_generic_1510_defconfig @@ -205,7 +205,6 @@ CONFIG_OMAP_ARM_168MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig index 0c42c89..d773857 100644 --- a/arch/arm/configs/omap_generic_1610_defconfig +++ b/arch/arm/configs/omap_generic_1610_defconfig @@ -207,7 +207,6 @@ CONFIG_OMAP_ARM_192MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/omap_generic_1710_defconfig b/arch/arm/configs/omap_generic_1710_defconfig index 0a00a70..6ec487e 100644 --- a/arch/arm/configs/omap_generic_1710_defconfig +++ b/arch/arm/configs/omap_generic_1710_defconfig @@ -201,7 +201,6 @@ CONFIG_OMAP_ARM_192MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig index cf4073b..7218b96 100644 --- a/arch/arm/configs/omap_generic_2420_defconfig +++ b/arch/arm/configs/omap_generic_2420_defconfig @@ -191,7 +191,6 @@ CONFIG_ARCH_OMAP2420=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 74dbdc6..5231895 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -231,7 +231,6 @@ CONFIG_OMAP_ARM_60MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig index a4aab8e..b12b406 100644 --- a/arch/arm/configs/omap_h4_2420_defconfig +++ b/arch/arm/configs/omap_h4_2420_defconfig @@ -201,7 +201,6 @@ CONFIG_MACH_OMAP_H4=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig index 0cfe363..e9c1408 100644 --- a/arch/arm/configs/omap_innovator_1510_defconfig +++ b/arch/arm/configs/omap_innovator_1510_defconfig @@ -205,7 +205,6 @@ CONFIG_OMAP_ARM_168MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/omap_innovator_1610_defconfig b/arch/arm/configs/omap_innovator_1610_defconfig index 95d9f2b..fea9319 100644 --- a/arch/arm/configs/omap_innovator_1610_defconfig +++ b/arch/arm/configs/omap_innovator_1610_defconfig @@ -206,7 +206,6 @@ CONFIG_OMAP_ARM_192MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig index 9139532..0efb4b0 100644 --- a/arch/arm/configs/omap_ldp_defconfig +++ b/arch/arm/configs/omap_ldp_defconfig @@ -214,7 +214,6 @@ CONFIG_MACH_OMAP_LDP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig index 6b3b5c6..556fcca 100644 --- a/arch/arm/configs/omap_osk_5912_defconfig +++ b/arch/arm/configs/omap_osk_5912_defconfig @@ -212,7 +212,6 @@ CONFIG_OMAP_ARM_192MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/omap_perseus2_730_defconfig b/arch/arm/configs/omap_perseus2_730_defconfig index b94800c..9a15d5d 100644 --- a/arch/arm/configs/omap_perseus2_730_defconfig +++ b/arch/arm/configs/omap_perseus2_730_defconfig @@ -199,7 +199,6 @@ CONFIG_OMAP_ARM_182MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig index 4b00a43..a82e813 100644 --- a/arch/arm/configs/omap_zoom2_defconfig +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -222,7 +222,6 @@ CONFIG_MACH_OMAP_ZOOM2=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig index 0d7e37a..a3e3c82 100644 --- a/arch/arm/configs/omap_zoom3_defconfig +++ b/arch/arm/configs/omap_zoom3_defconfig @@ -236,7 +236,6 @@ CONFIG_MACH_OMAP_ZOOM3=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig index f8701fa..19b91de 100644 --- a/arch/arm/configs/onearm_defconfig +++ b/arch/arm/configs/onearm_defconfig @@ -161,7 +161,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 5383cd0..85b05d3 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -210,7 +210,6 @@ CONFIG_PLAT_ORION=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_FEROCEON=y CONFIG_CPU_FEROCEON_OLD_ID=y CONFIG_CPU_32v5=y diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig index b3ea2c4..bf06d36 100644 --- a/arch/arm/configs/overo_defconfig +++ b/arch/arm/configs/overo_defconfig @@ -217,7 +217,6 @@ CONFIG_MACH_OVERO=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/palmte_defconfig b/arch/arm/configs/palmte_defconfig index 40fc6a7..feffaa2 100644 --- a/arch/arm/configs/palmte_defconfig +++ b/arch/arm/configs/palmte_defconfig @@ -196,7 +196,6 @@ CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/palmtt_defconfig b/arch/arm/configs/palmtt_defconfig index e54ced4..55d5b7d 100644 --- a/arch/arm/configs/palmtt_defconfig +++ b/arch/arm/configs/palmtt_defconfig @@ -176,7 +176,6 @@ CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig index 08e1406..6efc746 100644 --- a/arch/arm/configs/palmz71_defconfig +++ b/arch/arm/configs/palmz71_defconfig @@ -200,7 +200,6 @@ CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig index a0dc37c..6d162b1 100644 --- a/arch/arm/configs/palmz72_defconfig +++ b/arch/arm/configs/palmz72_defconfig @@ -209,7 +209,6 @@ CONFIG_PXA_PWM=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig index 05ad96a..fa153f2 100644 --- a/arch/arm/configs/pcm027_defconfig +++ b/arch/arm/configs/pcm027_defconfig @@ -168,7 +168,6 @@ CONFIG_PXA27x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig index 9018f0f..6e7155c 100644 --- a/arch/arm/configs/picotux200_defconfig +++ b/arch/arm/configs/picotux200_defconfig @@ -168,7 +168,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig index f2d2dda..dbfabb5 100644 --- a/arch/arm/configs/pleb_defconfig +++ b/arch/arm/configs/pleb_defconfig @@ -100,7 +100,6 @@ CONFIG_SA1100_PLEB=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig index 67b5f1e..2f7b9ce 100644 --- a/arch/arm/configs/pnx4008_defconfig +++ b/arch/arm/configs/pnx4008_defconfig @@ -121,7 +121,6 @@ CONFIG_ARCH_PNX4008=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig index db5faea..791b8c3 100644 --- a/arch/arm/configs/pxa168_defconfig +++ b/arch/arm/configs/pxa168_defconfig @@ -184,7 +184,6 @@ CONFIG_PLAT_PXA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_MOHAWK=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig index 46e5089..3365c5d 100644 --- a/arch/arm/configs/pxa255-idp_defconfig +++ b/arch/arm/configs/pxa255-idp_defconfig @@ -92,7 +92,6 @@ CONFIG_PXA25x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig index 733b851..82ca6c8 100644 --- a/arch/arm/configs/pxa3xx_defconfig +++ b/arch/arm/configs/pxa3xx_defconfig @@ -240,7 +240,6 @@ CONFIG_PLAT_PXA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSC3=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig index 8c7e299..94e20fe 100644 --- a/arch/arm/configs/pxa910_defconfig +++ b/arch/arm/configs/pxa910_defconfig @@ -184,7 +184,6 @@ CONFIG_PLAT_PXA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_MOHAWK=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig index 9b32d0e..12d0d64 100644 --- a/arch/arm/configs/qil-a9260_defconfig +++ b/arch/arm/configs/qil-a9260_defconfig @@ -195,7 +195,6 @@ CONFIG_AT91_EARLY_USART0=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig index 21db4b3..1237017 100644 --- a/arch/arm/configs/realview-smp_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -186,7 +186,6 @@ CONFIG_REALVIEW_HIGH_PHYS_OFFSET=y # # Processor Type # -CONFIG_CPU_32=y # CONFIG_CPU_ARM926T is not set CONFIG_CPU_V6=y CONFIG_CPU_32v6K=y diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index 9a75c30..a509a5e 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -184,7 +184,6 @@ CONFIG_MACH_REALVIEW_PB1176=y # # Processor Type # -CONFIG_CPU_32=y # CONFIG_CPU_ARM926T is not set CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig index a29d61f..e9124a0 100644 --- a/arch/arm/configs/rpc_defconfig +++ b/arch/arm/configs/rpc_defconfig @@ -150,7 +150,6 @@ CONFIG_ARCH_ACORN=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM610=y CONFIG_CPU_ARM710=y CONFIG_CPU_SA110=y diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index 1559734..b6eeebb 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -212,7 +212,6 @@ CONFIG_MACH_NOKIA_RX51=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index b498104..2f10dae 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -277,7 +277,6 @@ CONFIG_MACH_SMDK2443=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v4T=y diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index 3286060..f56e50f 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -192,7 +192,6 @@ CONFIG_SMDK6410_SD_CH0=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_V6=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v6=y diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig index b0d7d3d..dc108af 100644 --- a/arch/arm/configs/s5pc100_defconfig +++ b/arch/arm/configs/s5pc100_defconfig @@ -202,7 +202,6 @@ CONFIG_MACH_SMDKC100=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig index 1174e27..81b290a 100644 --- a/arch/arm/configs/sam9_l9260_defconfig +++ b/arch/arm/configs/sam9_l9260_defconfig @@ -175,7 +175,6 @@ CONFIG_MTD_AT91_DATAFLASH_CARD=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig index 984f7096..7c49bc3 100644 --- a/arch/arm/configs/shannon_defconfig +++ b/arch/arm/configs/shannon_defconfig @@ -99,7 +99,6 @@ CONFIG_SA1100_SHANNON=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig index 90235bf..46de124 100644 --- a/arch/arm/configs/shark_defconfig +++ b/arch/arm/configs/shark_defconfig @@ -173,7 +173,6 @@ CONFIG_ARCH_SHARK=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA110=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig index 685d2b5..ee25e63 100644 --- a/arch/arm/configs/simpad_defconfig +++ b/arch/arm/configs/simpad_defconfig @@ -101,7 +101,6 @@ CONFIG_SA1100_SIMPAD=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_SA1100=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 745c68f..7d89489 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -212,7 +212,6 @@ CONFIG_PXA_SSP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig index 44461f1..b1a3a97 100644 --- a/arch/arm/configs/stmp378x_defconfig +++ b/arch/arm/configs/stmp378x_defconfig @@ -193,7 +193,6 @@ CONFIG_MACH_STMP378X=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig index 401279d..a3751c9 100644 --- a/arch/arm/configs/stmp37xx_defconfig +++ b/arch/arm/configs/stmp37xx_defconfig @@ -182,7 +182,6 @@ CONFIG_MACH_STMP37XX=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig index 25b007f..8a9e7e6 100644 --- a/arch/arm/configs/sx1_defconfig +++ b/arch/arm/configs/sx1_defconfig @@ -210,7 +210,6 @@ CONFIG_OMAP_ARM_168MHZ=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM925T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 9d32fae..dccf14b 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -215,7 +215,6 @@ CONFIG_MACH_TCT_HAMMER=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index b6f8381..1e8f5a2 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -156,7 +156,6 @@ CONFIG_PXA27x=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 953ba02..610ac3c 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -207,7 +207,6 @@ CONFIG_MACH_U300_SPIDUMMY=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 15fde22..727aff9 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -201,7 +201,6 @@ CONFIG_MACH_U8500_MOP=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig index fd77740..87b700e 100644 --- a/arch/arm/configs/usb-a9260_defconfig +++ b/arch/arm/configs/usb-a9260_defconfig @@ -195,7 +195,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig index e7c19dd..7f018ed 100644 --- a/arch/arm/configs/usb-a9263_defconfig +++ b/arch/arm/configs/usb-a9263_defconfig @@ -187,7 +187,6 @@ CONFIG_AT91_EARLY_DBGU=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index b11c5da..a1af0b9 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -117,7 +117,6 @@ CONFIG_MACH_VERSATILE_AB=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 6ab5dd5..909887a 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -204,7 +204,6 @@ CONFIG_PXA_HAVE_ISA_IRQS=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig index 33bb725..84a72ac 100644 --- a/arch/arm/configs/xcep_defconfig +++ b/arch/arm/configs/xcep_defconfig @@ -208,7 +208,6 @@ CONFIG_PLAT_PXA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig index 9192e59..3b627aa 100644 --- a/arch/arm/configs/yl9200_defconfig +++ b/arch/arm/configs/yl9200_defconfig @@ -183,7 +183,6 @@ CONFIG_MACH_YL9200=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 823b11e..fca5ff6 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -271,7 +271,6 @@ CONFIG_PLAT_PXA=y # # Processor Type # -CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y diff --git a/arch/arm/include/asm/asm-offsets.h b/arch/arm/include/asm/asm-offsets.h new file mode 100644 index 0000000..d370ee3 --- /dev/null +++ b/arch/arm/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 73eceb8..730aefc 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -211,7 +211,7 @@ struct cpu_cache_fns { void (*coherent_kern_range)(unsigned long, unsigned long); void (*coherent_user_range)(unsigned long, unsigned long); - void (*flush_kern_dcache_page)(void *); + void (*flush_kern_dcache_area)(void *, size_t); void (*dma_inv_range)(const void *, const void *); void (*dma_clean_range)(const void *, const void *); @@ -236,7 +236,7 @@ extern struct cpu_cache_fns cpu_cache; #define __cpuc_flush_user_range cpu_cache.flush_user_range #define __cpuc_coherent_kern_range cpu_cache.coherent_kern_range #define __cpuc_coherent_user_range cpu_cache.coherent_user_range -#define __cpuc_flush_dcache_page cpu_cache.flush_kern_dcache_page +#define __cpuc_flush_dcache_area cpu_cache.flush_kern_dcache_area /* * These are private to the dma-mapping API. Do not use directly. @@ -255,14 +255,14 @@ extern struct cpu_cache_fns cpu_cache; #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) -#define __cpuc_flush_dcache_page __glue(_CACHE,_flush_kern_dcache_page) +#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area) extern void __cpuc_flush_kern_all(void); extern void __cpuc_flush_user_all(void); extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int); extern void __cpuc_coherent_kern_range(unsigned long, unsigned long); extern void __cpuc_coherent_user_range(unsigned long, unsigned long); -extern void __cpuc_flush_dcache_page(void *); +extern void __cpuc_flush_dcache_area(void *, size_t); /* * These are private to the dma-mapping API. Do not use directly. @@ -448,7 +448,7 @@ static inline void flush_kernel_dcache_page(struct page *page) { /* highmem pages are always flushed upon kunmap already */ if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page)) - __cpuc_flush_dcache_page(page_address(page)); + __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } #define flush_dcache_mmap_lock(mapping) \ @@ -465,13 +465,6 @@ static inline void flush_kernel_dcache_page(struct page *page) */ #define flush_icache_page(vma,page) do { } while (0) -static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt, - unsigned offset, size_t size) -{ - const void *start = (void __force *)virt + offset; - dmac_inv_range(start, start + size); -} - /* * flush_cache_vmap() is used when creating mappings (eg, via vmap, * vmalloc, ioremap etc) in kernel space for pages. On non-VIPT diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 6aac3f5..a399bb5 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -101,7 +101,6 @@ extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int); int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); #define ELF_CORE_COPY_TASK_REGS dump_task_regs -#define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE 4096 /* This is the location that an ET_DYN program is loaded if exec'ed. Typical diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h new file mode 100644 index 0000000..948178c --- /dev/null +++ b/arch/arm/include/asm/mach-types.h @@ -0,0 +1 @@ +#include <generated/mach-types.h> diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index 3976412..8fdae9b 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -24,206 +24,228 @@ * CPU_NAME - the prefix for CPU related functions */ -#ifdef CONFIG_CPU_32 -# ifdef CONFIG_CPU_ARM610 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm6 -# endif +#ifdef CONFIG_CPU_ARM610 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm6 # endif -# ifdef CONFIG_CPU_ARM7TDMI -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm7tdmi -# endif +#endif + +#ifdef CONFIG_CPU_ARM7TDMI +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm7tdmi # endif -# ifdef CONFIG_CPU_ARM710 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm7 -# endif +#endif + +#ifdef CONFIG_CPU_ARM710 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm7 # endif -# ifdef CONFIG_CPU_ARM720T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm720 -# endif +#endif + +#ifdef CONFIG_CPU_ARM720T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm720 # endif -# ifdef CONFIG_CPU_ARM740T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm740 -# endif +#endif + +#ifdef CONFIG_CPU_ARM740T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm740 # endif -# ifdef CONFIG_CPU_ARM9TDMI -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm9tdmi -# endif +#endif + +#ifdef CONFIG_CPU_ARM9TDMI +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm9tdmi # endif -# ifdef CONFIG_CPU_ARM920T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm920 -# endif +#endif + +#ifdef CONFIG_CPU_ARM920T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm920 # endif -# ifdef CONFIG_CPU_ARM922T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm922 -# endif +#endif + +#ifdef CONFIG_CPU_ARM922T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm922 # endif -# ifdef CONFIG_CPU_FA526 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_fa526 -# endif +#endif + +#ifdef CONFIG_CPU_FA526 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_fa526 # endif -# ifdef CONFIG_CPU_ARM925T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm925 -# endif +#endif + +#ifdef CONFIG_CPU_ARM925T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm925 # endif -# ifdef CONFIG_CPU_ARM926T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm926 -# endif +#endif + +#ifdef CONFIG_CPU_ARM926T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm926 # endif -# ifdef CONFIG_CPU_ARM940T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm940 -# endif +#endif + +#ifdef CONFIG_CPU_ARM940T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm940 # endif -# ifdef CONFIG_CPU_ARM946E -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm946 -# endif +#endif + +#ifdef CONFIG_CPU_ARM946E +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm946 # endif -# ifdef CONFIG_CPU_SA110 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_sa110 -# endif +#endif + +#ifdef CONFIG_CPU_SA110 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_sa110 # endif -# ifdef CONFIG_CPU_SA1100 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_sa1100 -# endif +#endif + +#ifdef CONFIG_CPU_SA1100 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_sa1100 # endif -# ifdef CONFIG_CPU_ARM1020 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1020 -# endif +#endif + +#ifdef CONFIG_CPU_ARM1020 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1020 # endif -# ifdef CONFIG_CPU_ARM1020E -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1020e -# endif +#endif + +#ifdef CONFIG_CPU_ARM1020E +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1020e # endif -# ifdef CONFIG_CPU_ARM1022 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1022 -# endif +#endif + +#ifdef CONFIG_CPU_ARM1022 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1022 # endif -# ifdef CONFIG_CPU_ARM1026 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1026 -# endif +#endif + +#ifdef CONFIG_CPU_ARM1026 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1026 # endif -# ifdef CONFIG_CPU_XSCALE -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_xscale -# endif +#endif + +#ifdef CONFIG_CPU_XSCALE +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_xscale # endif -# ifdef CONFIG_CPU_XSC3 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_xsc3 -# endif +#endif + +#ifdef CONFIG_CPU_XSC3 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_xsc3 # endif -# ifdef CONFIG_CPU_MOHAWK -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_mohawk -# endif +#endif + +#ifdef CONFIG_CPU_MOHAWK +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_mohawk # endif -# ifdef CONFIG_CPU_FEROCEON -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_feroceon -# endif +#endif + +#ifdef CONFIG_CPU_FEROCEON +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_feroceon # endif -# ifdef CONFIG_CPU_V6 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_v6 -# endif +#endif + +#ifdef CONFIG_CPU_V6 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_v6 # endif -# ifdef CONFIG_CPU_V7 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_v7 -# endif +#endif + +#ifdef CONFIG_CPU_V7 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_v7 # endif #endif diff --git a/arch/arm/include/asm/thread_notify.h b/arch/arm/include/asm/thread_notify.h index f27379d..c4391ba 100644 --- a/arch/arm/include/asm/thread_notify.h +++ b/arch/arm/include/asm/thread_notify.h @@ -41,7 +41,7 @@ static inline void thread_notify(unsigned long rc, struct thread_info *thread) * These are the reason codes for the thread notifier. */ #define THREAD_NOTIFY_FLUSH 0 -#define THREAD_NOTIFY_RELEASE 1 +#define THREAD_NOTIFY_EXIT 1 #define THREAD_NOTIFY_SWITCH 2 #endif diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 0e62770..8214bfe 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -48,27 +48,7 @@ extern void __aeabi_uidivmod(void); extern void __aeabi_ulcmp(void); extern void fpundefinstr(void); -extern void fp_enter(void); -/* - * This has a special calling convention; it doesn't - * modify any of the usual registers, except for LR. - */ -#define EXPORT_CRC_ALIAS(sym) __CRC_SYMBOL(sym, "") - -#define EXPORT_SYMBOL_ALIAS(sym,orig) \ - EXPORT_CRC_ALIAS(sym) \ - static const struct kernel_symbol __ksymtab_##sym \ - __used __attribute__((section("__ksymtab"))) = \ - { (unsigned long)&orig, #sym }; - -/* - * floating point math emulator support. - * These symbols will never change their calling convention... - */ -EXPORT_SYMBOL_ALIAS(kern_fp_enter,fp_enter); -EXPORT_SYMBOL_ALIAS(fp_printk,printk); -EXPORT_SYMBOL_ALIAS(fp_send_sig,send_sig); EXPORT_SYMBOL(__backtrace); diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c index 769abe1..25ef223 100644 --- a/arch/arm/kernel/crunch.c +++ b/arch/arm/kernel/crunch.c @@ -51,7 +51,7 @@ static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t) * initialised state information on the first fault. */ - case THREAD_NOTIFY_RELEASE: + case THREAD_NOTIFY_EXIT: crunch_task_release(thread); break; diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c index 0e88e46..360bb6d 100644 --- a/arch/arm/kernel/dma-isa.c +++ b/arch/arm/kernel/dma-isa.c @@ -207,8 +207,6 @@ void __init isa_init_dma(void) outb(0x32, 0x4d6); outb(0x33, 0x4d6); - request_dma(DMA_ISA_CASCADE, "cascade"); - for (i = 0; i < ARRAY_SIZE(dma_resources); i++) request_resource(&ioport_resource, dma_resources + i); @@ -218,5 +216,7 @@ void __init isa_init_dma(void) printk(KERN_ERR "ISADMA%u: unable to register: %d\n", chan, ret); } + + request_dma(DMA_ISA_CASCADE, "cascade"); } } diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 0d96d01..6730413 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -274,17 +274,18 @@ void show_regs(struct pt_regs * regs) __backtrace(); } +ATOMIC_NOTIFIER_HEAD(thread_notify_head); + +EXPORT_SYMBOL_GPL(thread_notify_head); + /* * Free current thread data structures etc.. */ void exit_thread(void) { + thread_notify(THREAD_NOTIFY_EXIT, current_thread_info()); } -ATOMIC_NOTIFIER_HEAD(thread_notify_head); - -EXPORT_SYMBOL_GPL(thread_notify_head); - void flush_thread(void) { struct thread_info *thread = current_thread_info(); @@ -299,9 +300,6 @@ void flush_thread(void) void release_thread(struct task_struct *dead_task) { - struct thread_info *thread = task_thread_info(dead_task); - - thread_notify(THREAD_NOTIFY_RELEASE, thread); } asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 71151bd..4957e13e 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -65,11 +65,11 @@ SECTIONS __init_end = .; #endif - /DISCARD/ : { /* Exit code and data */ - EXIT_TEXT - EXIT_DATA - *(.exitcall.exit) - *(.discard) + /* + * unwind exit sections must be discarded before the rest of the + * unwind sections get included. + */ + /DISCARD/ : { *(.ARM.exidx.exit.text) *(.ARM.extab.exit.text) #ifndef CONFIG_HOTPLUG_CPU @@ -238,6 +238,9 @@ SECTIONS STABS_DEBUG .comment 0 : { *(.comment) } + + /* Default discards */ + DISCARDS } /* diff --git a/arch/arm/kernel/xscale-cp0.c b/arch/arm/kernel/xscale-cp0.c index 17127db..1796157 100644 --- a/arch/arm/kernel/xscale-cp0.c +++ b/arch/arm/kernel/xscale-cp0.c @@ -70,7 +70,7 @@ static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t) * initialised state information on the first fault. */ - case THREAD_NOTIFY_RELEASE: + case THREAD_NOTIFY_EXIT: iwmmxt_task_release(thread); break; diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index fbe6fa0..53dd2a9 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c @@ -70,9 +70,19 @@ static struct ctl_table bcmring_sysctl_reboot[] = { {} }; +static struct resource nand_resource[] = { + [0] = { + .start = MM_ADDR_IO_NAND, + .end = MM_ADDR_IO_NAND + 0x1000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + static struct platform_device nand_device = { .name = "bcm-nand", .id = -1, + .resource = nand_resource, + .num_resources = ARRAY_SIZE(nand_resource), }; static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-bcmring/include/mach/reg_nand.h b/arch/arm/mach-bcmring/include/mach/reg_nand.h new file mode 100644 index 0000000..387376f --- /dev/null +++ b/arch/arm/mach-bcmring/include/mach/reg_nand.h @@ -0,0 +1,66 @@ +/***************************************************************************** +* Copyright 2001 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/* +* +***************************************************************************** +* +* REG_NAND.h +* +* PURPOSE: +* +* This file contains definitions for the nand registers: +* +* NOTES: +* +*****************************************************************************/ + +#if !defined(__ASM_ARCH_REG_NAND_H) +#define __ASM_ARCH_REG_NAND_H + +/* ---- Include Files ---------------------------------------------------- */ +#include <csp/reg.h> +#include <mach/reg_umi.h> + +/* ---- Constants and Types ---------------------------------------------- */ + +#define HW_NAND_BASE MM_IO_BASE_NAND /* NAND Flash */ + +/* DMA accesses by the bootstrap need hard nonvirtual addresses */ +#define REG_NAND_CMD __REG16(HW_NAND_BASE + 0) +#define REG_NAND_ADDR __REG16(HW_NAND_BASE + 4) + +#define REG_NAND_PHYS_DATA16 (HW_NAND_BASE + 8) +#define REG_NAND_PHYS_DATA8 (HW_NAND_BASE + 8) +#define REG_NAND_DATA16 __REG16(REG_NAND_PHYS_DATA16) +#define REG_NAND_DATA8 __REG8(REG_NAND_PHYS_DATA8) + +/* use appropriate offset to make sure it start at the 1K boundary */ +#define REG_NAND_PHYS_DATA_DMA (HW_NAND_BASE + 0x400) +#define REG_NAND_DATA_DMA __REG32(REG_NAND_PHYS_DATA_DMA) + +/* Linux DMA requires physical address of the data register */ +#define REG_NAND_DATA16_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA16) +#define REG_NAND_DATA8_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA8) +#define REG_NAND_DATA_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA_DMA) + +#define NAND_BUS_16BIT() (0) +#define NAND_BUS_8BIT() (!NAND_BUS_16BIT()) + +/* Register offsets */ +#define REG_NAND_CMD_OFFSET (0) +#define REG_NAND_ADDR_OFFSET (4) +#define REG_NAND_DATA8_OFFSET (8) + +#endif diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h new file mode 100644 index 0000000..06a3554 --- /dev/null +++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h @@ -0,0 +1,237 @@ +/***************************************************************************** +* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/* +* +***************************************************************************** +* +* REG_UMI.h +* +* PURPOSE: +* +* This file contains definitions for the nand registers: +* +* NOTES: +* +*****************************************************************************/ + +#if !defined(__ASM_ARCH_REG_UMI_H) +#define __ASM_ARCH_REG_UMI_H + +/* ---- Include Files ---------------------------------------------------- */ +#include <csp/reg.h> +#include <mach/csp/mm_io.h> + +/* ---- Constants and Types ---------------------------------------------- */ + +/* Unified Memory Interface Ctrl Register */ +#define HW_UMI_BASE MM_IO_BASE_UMI + +/* Flash bank 0 timing and control register */ +#define REG_UMI_FLASH0_TCR __REG32(HW_UMI_BASE + 0x00) +/* Flash bank 1 timing and control register */ +#define REG_UMI_FLASH1_TCR __REG32(HW_UMI_BASE + 0x04) +/* Flash bank 2 timing and control register */ +#define REG_UMI_FLASH2_TCR __REG32(HW_UMI_BASE + 0x08) +/* MMD interface and control register */ +#define REG_UMI_MMD_ICR __REG32(HW_UMI_BASE + 0x0c) +/* NAND timing and control register */ +#define REG_UMI_NAND_TCR __REG32(HW_UMI_BASE + 0x18) +/* NAND ready/chip select register */ +#define REG_UMI_NAND_RCSR __REG32(HW_UMI_BASE + 0x1c) +/* NAND ECC control & status register */ +#define REG_UMI_NAND_ECC_CSR __REG32(HW_UMI_BASE + 0x20) +/* NAND ECC data register XXB2B1B0 */ +#define REG_UMI_NAND_ECC_DATA __REG32(HW_UMI_BASE + 0x24) +/* BCH ECC Parameter N */ +#define REG_UMI_BCH_N __REG32(HW_UMI_BASE + 0x40) +/* BCH ECC Parameter T */ +#define REG_UMI_BCH_K __REG32(HW_UMI_BASE + 0x44) +/* BCH ECC Parameter K */ +#define REG_UMI_BCH_T __REG32(HW_UMI_BASE + 0x48) +/* BCH ECC Contro Status */ +#define REG_UMI_BCH_CTRL_STATUS __REG32(HW_UMI_BASE + 0x4C) +/* BCH WR ECC 31:0 */ +#define REG_UMI_BCH_WR_ECC_0 __REG32(HW_UMI_BASE + 0x50) +/* BCH WR ECC 63:32 */ +#define REG_UMI_BCH_WR_ECC_1 __REG32(HW_UMI_BASE + 0x54) +/* BCH WR ECC 95:64 */ +#define REG_UMI_BCH_WR_ECC_2 __REG32(HW_UMI_BASE + 0x58) +/* BCH WR ECC 127:96 */ +#define REG_UMI_BCH_WR_ECC_3 __REG32(HW_UMI_BASE + 0x5c) +/* BCH WR ECC 155:128 */ +#define REG_UMI_BCH_WR_ECC_4 __REG32(HW_UMI_BASE + 0x60) +/* BCH Read Error Location 1,0 */ +#define REG_UMI_BCH_RD_ERR_LOC_1_0 __REG32(HW_UMI_BASE + 0x64) +/* BCH Read Error Location 3,2 */ +#define REG_UMI_BCH_RD_ERR_LOC_3_2 __REG32(HW_UMI_BASE + 0x68) +/* BCH Read Error Location 5,4 */ +#define REG_UMI_BCH_RD_ERR_LOC_5_4 __REG32(HW_UMI_BASE + 0x6c) +/* BCH Read Error Location 7,6 */ +#define REG_UMI_BCH_RD_ERR_LOC_7_6 __REG32(HW_UMI_BASE + 0x70) +/* BCH Read Error Location 9,8 */ +#define REG_UMI_BCH_RD_ERR_LOC_9_8 __REG32(HW_UMI_BASE + 0x74) +/* BCH Read Error Location 11,10 */ +#define REG_UMI_BCH_RD_ERR_LOC_B_A __REG32(HW_UMI_BASE + 0x78) + +/* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */ +/* Enable wait pin during burst write or read */ +#define REG_UMI_TCR_WAITEN 0x80000000 +/* Enable mem ctrlr to work iwth ext mem of lower freq than AHB clk */ +#define REG_UMI_TCR_LOWFREQ 0x40000000 +/* 1=synch write, 0=async write */ +#define REG_UMI_TCR_MEMTYPE_SYNCWRITE 0x20000000 +/* 1=synch read, 0=async read */ +#define REG_UMI_TCR_MEMTYPE_SYNCREAD 0x10000000 +/* 1=page mode read, 0=normal mode read */ +#define REG_UMI_TCR_MEMTYPE_PAGEREAD 0x08000000 +/* page size/burst size (wrap only) */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_MASK 0x07000000 +/* 4 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_4 0x00000000 +/* 8 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_8 0x01000000 +/* 16 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_16 0x02000000 +/* 32 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_32 0x03000000 +/* 64 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_64 0x04000000 +/* 128 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_128 0x05000000 +/* 256 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_256 0x06000000 +/* 512 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_512 0x07000000 +/* Page read access cycle / Burst write latency (n+2 / n+1) */ +#define REG_UMI_TCR_TPRC_TWLC_MASK 0x00f80000 +/* Bus turnaround cycle (n) */ +#define REG_UMI_TCR_TBTA_MASK 0x00070000 +/* Write pulse width cycle (n+1) */ +#define REG_UMI_TCR_TWP_MASK 0x0000f800 +/* Write recovery cycle (n+1) */ +#define REG_UMI_TCR_TWR_MASK 0x00000600 +/* Write address setup cycle (n+1) */ +#define REG_UMI_TCR_TAS_MASK 0x00000180 +/* Output enable delay cycle (n) */ +#define REG_UMI_TCR_TOE_MASK 0x00000060 +/* Read access cycle / Burst read latency (n+2 / n+1) */ +#define REG_UMI_TCR_TRC_TLC_MASK 0x0000001f + +/* REG_UMI_MMD_ICR bits */ +/* Flash write protection pin control */ +#define REG_UMI_MMD_ICR_FLASH_WP 0x8000 +/* Extend hold time for sram0, sram1 csn (39 MHz operation) */ +#define REG_UMI_MMD_ICR_XHCS 0x4000 +/* Enable SDRAM 2 interface control */ +#define REG_UMI_MMD_ICR_SDRAM2EN 0x2000 +/* Enable merge of flash banks 0/1 to 512 MBit bank */ +#define REG_UMI_MMD_ICR_INST512 0x1000 +/* Enable merge of flash banks 1/2 to 512 MBit bank */ +#define REG_UMI_MMD_ICR_DATA512 0x0800 +/* Enable SDRAM interface control */ +#define REG_UMI_MMD_ICR_SDRAMEN 0x0400 +/* Polarity of busy state of Burst Wait Signal */ +#define REG_UMI_MMD_ICR_WAITPOL 0x0200 +/* Enable burst clock stopped when not accessing external burst flash/sram */ +#define REG_UMI_MMD_ICR_BCLKSTOP 0x0100 +/* Enable the peri1_csn to replace flash1_csn in 512 Mb flash mode */ +#define REG_UMI_MMD_ICR_PERI1EN 0x0080 +/* Enable the peri2_csn to replace sdram_csn */ +#define REG_UMI_MMD_ICR_PERI2EN 0x0040 +/* Enable the peri3_csn to replace sdram2_csn */ +#define REG_UMI_MMD_ICR_PERI3EN 0x0020 +/* Enable sram bank1 for H/W controlled MRS */ +#define REG_UMI_MMD_ICR_MRSB1 0x0010 +/* Enable sram bank0 for H/W controlled MRS */ +#define REG_UMI_MMD_ICR_MRSB0 0x0008 +/* Polarity for assert3ed state of H/W controlled MRS */ +#define REG_UMI_MMD_ICR_MRSPOL 0x0004 +/* 0: S/W controllable ZZ/MRS/CRE/P-Mode pin */ +/* 1: H/W controlled ZZ/MRS/CRE/P-Mode, same timing as CS */ +#define REG_UMI_MMD_ICR_MRSMODE 0x0002 +/* MRS state for S/W controlled mode */ +#define REG_UMI_MMD_ICR_MRSSTATE 0x0001 + +/* REG_UMI_NAND_TCR bits */ +/* Enable software to control CS */ +#define REG_UMI_NAND_TCR_CS_SWCTRL 0x80000000 +/* 16-bit nand wordsize if set */ +#define REG_UMI_NAND_TCR_WORD16 0x40000000 +/* Bus turnaround cycle (n) */ +#define REG_UMI_NAND_TCR_TBTA_MASK 0x00070000 +/* Write pulse width cycle (n+1) */ +#define REG_UMI_NAND_TCR_TWP_MASK 0x0000f800 +/* Write recovery cycle (n+1) */ +#define REG_UMI_NAND_TCR_TWR_MASK 0x00000600 +/* Write address setup cycle (n+1) */ +#define REG_UMI_NAND_TCR_TAS_MASK 0x00000180 +/* Output enable delay cycle (n) */ +#define REG_UMI_NAND_TCR_TOE_MASK 0x00000060 +/* Read access cycle (n+2) */ +#define REG_UMI_NAND_TCR_TRC_TLC_MASK 0x0000001f + +/* REG_UMI_NAND_RCSR bits */ +/* Status: Ready=1, Busy=0 */ +#define REG_UMI_NAND_RCSR_RDY 0x02 +/* Keep CS asserted during operation */ +#define REG_UMI_NAND_RCSR_CS_ASSERTED 0x01 + +/* REG_UMI_NAND_ECC_CSR bits */ +/* Interrupt status - read-only */ +#define REG_UMI_NAND_ECC_CSR_NANDINT 0x80000000 +/* Read: Status of ECC done, Write: clear ECC interrupt */ +#define REG_UMI_NAND_ECC_CSR_ECCINT_RAW 0x00800000 +/* Read: Status of R/B, Write: clear R/B interrupt */ +#define REG_UMI_NAND_ECC_CSR_RBINT_RAW 0x00400000 +/* 1 = Enable ECC Interrupt */ +#define REG_UMI_NAND_ECC_CSR_ECCINT_ENABLE 0x00008000 +/* 1 = Assert interrupt at rising edge of R/B_ */ +#define REG_UMI_NAND_ECC_CSR_RBINT_ENABLE 0x00004000 +/* Calculate ECC by 0=512 bytes, 1=256 bytes */ +#define REG_UMI_NAND_ECC_CSR_256BYTE 0x00000080 +/* Enable ECC in hardware */ +#define REG_UMI_NAND_ECC_CSR_ECC_ENABLE 0x00000001 + +/* REG_UMI_BCH_CTRL_STATUS bits */ +/* Shift to Indicate Number of correctable errors detected */ +#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR_SHIFT 20 +/* Indicate Number of correctable errors detected */ +#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR 0x00F00000 +/* Indicate Errors detected during read but uncorrectable */ +#define REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR 0x00080000 +/* Indicate Errors detected during read and are correctable */ +#define REG_UMI_BCH_CTRL_STATUS_CORR_ERR 0x00040000 +/* Flag indicates BCH's ECC status of read process are valid */ +#define REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID 0x00020000 +/* Flag indicates BCH's ECC status of write process are valid */ +#define REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID 0x00010000 +/* Pause ECC calculation */ +#define REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC 0x00000010 +/* Enable Interrupt */ +#define REG_UMI_BCH_CTRL_STATUS_INT_EN 0x00000004 +/* Enable ECC during read */ +#define REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN 0x00000002 +/* Enable ECC during write */ +#define REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN 0x00000001 +/* Mask for location */ +#define REG_UMI_BCH_ERR_LOC_MASK 0x00001FFF +/* location within a byte */ +#define REG_UMI_BCH_ERR_LOC_BYTE 0x00000007 +/* location within a word */ +#define REG_UMI_BCH_ERR_LOC_WORD 0x00000018 +/* location within a page (512 byte) */ +#define REG_UMI_BCH_ERR_LOC_PAGE 0x00001FE0 +#define REG_UMI_BCH_ERR_LOC_ADDR(index) (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16)) +#endif diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 62b98bf..07de8db 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -339,6 +339,15 @@ static struct davinci_mmc_config da850_mmc_config = { .version = MMC_CTLR_VERSION_2, }; +static void da850_panel_power_ctrl(int val) +{ + /* lcd backlight */ + gpio_set_value(DA850_LCD_BL_PIN, val); + + /* lcd power */ + gpio_set_value(DA850_LCD_PWR_PIN, val); +} + static int da850_lcd_hw_init(void) { int status; @@ -356,17 +365,11 @@ static int da850_lcd_hw_init(void) gpio_direction_output(DA850_LCD_BL_PIN, 0); gpio_direction_output(DA850_LCD_PWR_PIN, 0); - /* disable lcd backlight */ - gpio_set_value(DA850_LCD_BL_PIN, 0); - - /* disable lcd power */ - gpio_set_value(DA850_LCD_PWR_PIN, 0); - - /* enable lcd power */ - gpio_set_value(DA850_LCD_PWR_PIN, 1); + /* Switch off panel power and backlight */ + da850_panel_power_ctrl(0); - /* enable lcd backlight */ - gpio_set_value(DA850_LCD_BL_PIN, 1); + /* Switch on panel power and backlight */ + da850_panel_power_ctrl(1); return 0; } @@ -674,6 +677,7 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: lcd initialization failed: %d\n", ret); + sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl, ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata); if (ret) pr_warning("da850_evm_init: lcdc registration failed: %d\n", diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h index b520c4b..b2ad809 100644 --- a/arch/arm/mach-davinci/include/mach/nand.h +++ b/arch/arm/mach-davinci/include/mach/nand.h @@ -79,6 +79,10 @@ struct davinci_nand_pdata { /* platform_data */ /* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */ unsigned options; + + /* Main and mirror bbt descriptor overrides */ + struct nand_bbt_descr *bbt_td; + struct nand_bbt_descr *bbt_md; }; #endif /* __ARCH_ARM_DAVINCI_NAND_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h index 83f31cd..62d1742 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h @@ -5,9 +5,6 @@ #ifndef __ASM_ARCH_EP93XX_KEYPAD_H #define __ASM_ARCH_EP93XX_KEYPAD_H -#define MAX_MATRIX_KEY_ROWS (8) -#define MAX_MATRIX_KEY_COLS (8) - /* flags for the ep93xx_keypad driver */ #define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */ #define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ @@ -18,8 +15,6 @@ /** * struct ep93xx_keypad_platform_data - platform specific device structure - * @matrix_key_rows: number of rows in the keypad matrix - * @matrix_key_cols: number of columns in the keypad matrix * @matrix_key_map: array of keycodes defining the keypad matrix * @matrix_key_map_size: ARRAY_SIZE(matrix_key_map) * @debounce: debounce start count; terminal count is 0xff @@ -27,8 +22,6 @@ * @flags: see above */ struct ep93xx_keypad_platform_data { - unsigned int matrix_key_rows; - unsigned int matrix_key_cols; unsigned int *matrix_key_map; int matrix_key_map_size; unsigned int debounce; @@ -36,7 +29,7 @@ struct ep93xx_keypad_platform_data { unsigned int flags; }; -/* macro for creating the matrix_key_map table */ -#define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val)) +#define EP93XX_MATRIX_ROWS (8) +#define EP93XX_MATRIX_COLS (8) #endif /* __ASM_ARCH_EP93XX_KEYPAD_H */ diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index 32f8609..3afb1b2 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := common.o dc21285.o dma.o isa-irq.o time.o +obj-y := common.o dc21285.o dma.o isa-irq.o obj-m := obj-n := obj- := @@ -25,4 +25,4 @@ obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o obj-$(CONFIG_PCI) +=$(pci-y) obj-$(CONFIG_LEDS) +=$(leds-y) -obj-$(CONFIG_ISA) += isa.o +obj-$(CONFIG_ISA) += isa.o isa-rtc.o diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index da35bc5..bc5e83f 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -56,8 +56,6 @@ static void __init footbridge_timer_init(void) *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD | TIMER_CNTL_DIV16; setup_irq(IRQ_TIMER1, &footbridge_timer_irq); - - isa_rtc_init(); } struct sys_timer footbridge_timer = { diff --git a/arch/arm/mach-footbridge/isa-rtc.c b/arch/arm/mach-footbridge/isa-rtc.c new file mode 100644 index 0000000..07fde40 --- /dev/null +++ b/arch/arm/mach-footbridge/isa-rtc.c @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-footbridge/isa-rtc.c + * + * Copyright (C) 1998 Russell King. + * Copyright (C) 1998 Phil Blundell + * + * CATS has a real-time clock, though the evaluation board doesn't. + * + * Changelog: + * 21-Mar-1998 RMK Created + * 27-Aug-1998 PJB CATS support + * 28-Dec-1998 APH Made leds optional + * 20-Jan-1999 RMK Started merge of EBSA285, CATS and NetWinder + * 16-Mar-1999 RMK More support for EBSA285-like machines with RTCs in + */ + +#define RTC_PORT(x) (0x70+(x)) +#define RTC_ALWAYS_BCD 0 + +#include <linux/init.h> +#include <linux/mc146818rtc.h> +#include <linux/bcd.h> +#include <linux/io.h> + +#include "common.h" + +void __init isa_rtc_init(void) +{ + int reg_d, reg_b; + + /* + * Probe for the RTC. + */ + reg_d = CMOS_READ(RTC_REG_D); + + /* + * make sure the divider is set + */ + CMOS_WRITE(RTC_REF_CLCK_32KHZ, RTC_REG_A); + + /* + * Set control reg B + * (24 hour mode, update enabled) + */ + reg_b = CMOS_READ(RTC_REG_B) & 0x7f; + reg_b |= 2; + CMOS_WRITE(reg_b, RTC_REG_B); + + if ((CMOS_READ(RTC_REG_A) & 0x7f) == RTC_REF_CLCK_32KHZ && + CMOS_READ(RTC_REG_B) == reg_b) { + /* + * We have a RTC. Check the battery + */ + if ((reg_d & 0x80) == 0) + printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n"); + } +} diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c index 0c83900..f488fa2 100644 --- a/arch/arm/mach-footbridge/isa-timer.c +++ b/arch/arm/mach-footbridge/isa-timer.c @@ -76,8 +76,6 @@ static struct irqaction isa_timer_irq = { static void __init isa_timer_init(void) { - isa_rtc_init(); - /* enable PIT timer */ /* set for periodic (4) and LSB/MSB write (0x30) */ outb(0x34, 0x43); diff --git a/arch/arm/mach-footbridge/isa.c b/arch/arm/mach-footbridge/isa.c index 725a219..4d9276c 100644 --- a/arch/arm/mach-footbridge/isa.c +++ b/arch/arm/mach-footbridge/isa.c @@ -11,6 +11,9 @@ #include <linux/serial_8250.h> #include <asm/irq.h> +#include <asm/hardware/dec21285.h> + +#include "common.h" static struct resource rtc_resources[] = { [0] = { @@ -77,11 +80,18 @@ static struct platform_device serial_device = { static int __init footbridge_isa_init(void) { - int err; + int err = 0; - err = platform_device_register(&rtc_device); - if (err) - printk(KERN_ERR "Unable to register RTC device: %d\n", err); + if (!footbridge_cfn_mode()) + return 0; + + /* Personal server doesn't have RTC */ + if (!machine_is_personal_server()) { + isa_rtc_init(); + err = platform_device_register(&rtc_device); + if (err) + printk(KERN_ERR "Unable to register RTC device: %d\n", err); + } err = platform_device_register(&serial_device); if (err) printk(KERN_ERR "Unable to register serial device: %d\n", err); diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c deleted file mode 100644 index cd1b54f..0000000 --- a/arch/arm/mach-footbridge/time.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * arch/arm/mach-footbridge/include/mach/time.h - * - * Copyright (C) 1998 Russell King. - * Copyright (C) 1998 Phil Blundell - * - * CATS has a real-time clock, though the evaluation board doesn't. - * - * Changelog: - * 21-Mar-1998 RMK Created - * 27-Aug-1998 PJB CATS support - * 28-Dec-1998 APH Made leds optional - * 20-Jan-1999 RMK Started merge of EBSA285, CATS and NetWinder - * 16-Mar-1999 RMK More support for EBSA285-like machines with RTCs in - */ - -#define RTC_PORT(x) (rtc_base+(x)) -#define RTC_ALWAYS_BCD 0 - -#include <linux/timex.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/mc146818rtc.h> -#include <linux/bcd.h> -#include <linux/io.h> - -#include <mach/hardware.h> - -#include <asm/mach/time.h> -#include "common.h" - -static int rtc_base; - -static unsigned long __init get_isa_cmos_time(void) -{ - unsigned int year, mon, day, hour, min, sec; - - // check to see if the RTC makes sense..... - if ((CMOS_READ(RTC_VALID) & RTC_VRT) == 0) - return mktime(1970, 1, 1, 0, 0, 0); - - do { - sec = CMOS_READ(RTC_SECONDS); - min = CMOS_READ(RTC_MINUTES); - hour = CMOS_READ(RTC_HOURS); - day = CMOS_READ(RTC_DAY_OF_MONTH); - mon = CMOS_READ(RTC_MONTH); - year = CMOS_READ(RTC_YEAR); - } while (sec != CMOS_READ(RTC_SECONDS)); - - if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - sec = bcd2bin(sec); - min = bcd2bin(min); - hour = bcd2bin(hour); - day = bcd2bin(day); - mon = bcd2bin(mon); - year = bcd2bin(year); - } - if ((year += 1900) < 1970) - year += 100; - return mktime(year, mon, day, hour, min, sec); -} - -static int set_isa_cmos_time(void) -{ - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - unsigned char save_control, save_freq_select; - unsigned long nowtime = xtime.tv_sec; - - save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ - CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); - - save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */ - CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - - cmos_minutes = CMOS_READ(RTC_MINUTES); - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - cmos_minutes = bcd2bin(cmos_minutes); - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - cmos_minutes) < 30) { - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - real_seconds = bin2bcd(real_seconds); - real_minutes = bin2bcd(real_minutes); - } - CMOS_WRITE(real_seconds,RTC_SECONDS); - CMOS_WRITE(real_minutes,RTC_MINUTES); - } else - retval = -1; - - /* The following flags have to be released exactly in this order, - * otherwise the DS12887 (popular MC146818A clone with integrated - * battery and quartz) will not reset the oscillator and will not - * update precisely 500 ms later. You won't find this mentioned in - * the Dallas Semiconductor data sheets, but who believes data - * sheets anyway ... -- Markus Kuhn - */ - CMOS_WRITE(save_control, RTC_CONTROL); - CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); - - return retval; -} - -void __init isa_rtc_init(void) -{ - if (machine_is_personal_server()) - /* - * Add-in 21285s shouldn't access the RTC - */ - rtc_base = 0; - else - rtc_base = 0x70; - - if (rtc_base) { - int reg_d, reg_b; - - /* - * Probe for the RTC. - */ - reg_d = CMOS_READ(RTC_REG_D); - - /* - * make sure the divider is set - */ - CMOS_WRITE(RTC_REF_CLCK_32KHZ, RTC_REG_A); - - /* - * Set control reg B - * (24 hour mode, update enabled) - */ - reg_b = CMOS_READ(RTC_REG_B) & 0x7f; - reg_b |= 2; - CMOS_WRITE(reg_b, RTC_REG_B); - - if ((CMOS_READ(RTC_REG_A) & 0x7f) == RTC_REF_CLCK_32KHZ && - CMOS_READ(RTC_REG_B) == reg_b) { - struct timespec tv; - - /* - * We have a RTC. Check the battery - */ - if ((reg_d & 0x80) == 0) - printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n"); - - tv.tv_nsec = 0; - tv.tv_sec = get_isa_cmos_time(); - do_settimeofday(&tv); - set_rtc = set_isa_cmos_time; - } else - rtc_base = 0; - } -} diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 8bf09ae..f6c6196 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -52,6 +52,12 @@ config MACH_OPENRD_BASE Say 'Y' here if you want your kernel to support the Marvell OpenRD Base Board. +config MACH_NETSPACE_V2 + bool "LaCie Network Space v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie Network Space v2 NAS. + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 9f2f67b..d4d7f53 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -8,5 +8,6 @@ obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o +obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c new file mode 100644 index 0000000..9a06406 --- /dev/null +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -0,0 +1,325 @@ +/* + * arch/arm/mach-kirkwood/netspace_v2-setup.c + * + * LaCie Network Space v2 board setup + * + * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> + * Copyright (C) 2009 Benoît Canet <benoit.canet@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/kirkwood.h> +#include <plat/time.h> +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) + ****************************************************************************/ + +static struct mtd_partition netspace_v2_flash_parts[] = { + { + .name = "u-boot", + .size = MTDPART_SIZ_FULL, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, +}; + +static const struct flash_platform_data netspace_v2_flash = { + .type = "mx25l4005a", + .name = "spi_flash", + .parts = netspace_v2_flash_parts, + .nr_parts = ARRAY_SIZE(netspace_v2_flash_parts), +}; + +static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &netspace_v2_flash, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data netspace_v2_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +/***************************************************************************** + * I2C devices + ****************************************************************************/ + +static struct at24_platform_data at24c04 = { + .byte_len = SZ_4K / 8, + .page_size = 16, +}; + +/* + * i2c addr | chip | description + * 0x50 | HT24LC04 | eeprom (512B) + */ + +static struct i2c_board_info __initdata netspace_v2_i2c_info[] = { + { + I2C_BOARD_INFO("24c04", 0x50), + .platform_data = &at24c04, + } +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ + +static struct mv_sata_platform_data netspace_v2_sata_data = { + .n_ports = 2, +}; + +#define NETSPACE_V2_GPIO_SATA0_POWER 16 +#define NETSPACE_V2_GPIO_SATA1_POWER 17 + +static void __init netspace_v2_sata_power_init(void) +{ + int err; + + err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power"); + if (err == 0) { + err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1); + if (err) + gpio_free(NETSPACE_V2_GPIO_SATA0_POWER); + } + if (err) + pr_err("netspace_v2: failed to setup SATA0 power\n"); +} + +/***************************************************************************** + * GPIO keys + ****************************************************************************/ + +#define NETSPACE_V2_PUSH_BUTTON 32 + +static struct gpio_keys_button netspace_v2_buttons[] = { + [0] = { + .code = KEY_POWER, + .gpio = NETSPACE_V2_PUSH_BUTTON, + .desc = "Power push button", + .active_low = 0, + }, +}; + +static struct gpio_keys_platform_data netspace_v2_button_data = { + .buttons = netspace_v2_buttons, + .nbuttons = ARRAY_SIZE(netspace_v2_buttons), +}; + +static struct platform_device netspace_v2_gpio_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &netspace_v2_button_data, + }, +}; + +/***************************************************************************** + * GPIO LEDs + ****************************************************************************/ + +/* + * The blue front LED is wired to a CPLD and can blink in relation with the + * SATA activity. + * + * The following array detail the different LED registers and the combination + * of their possible values: + * + * cmd_led | slow_led | /SATA active | LED state + * | | | + * 1 | 0 | x | off + * - | 1 | x | on + * 0 | 0 | 1 | on + * 0 | 0 | 0 | blink (rate 300ms) + */ + +#define NETSPACE_V2_GPIO_RED_LED 12 +#define NETSPACE_V2_GPIO_BLUE_LED_SLOW 29 +#define NETSPACE_V2_GPIO_BLUE_LED_CMD 30 + + +static struct gpio_led netspace_v2_gpio_led_pins[] = { + { + .name = "ns_v2:red:fail", + .gpio = NETSPACE_V2_GPIO_RED_LED, + }, +}; + +static struct gpio_led_platform_data netspace_v2_gpio_leds_data = { + .num_leds = ARRAY_SIZE(netspace_v2_gpio_led_pins), + .leds = netspace_v2_gpio_led_pins, +}; + +static struct platform_device netspace_v2_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &netspace_v2_gpio_leds_data, + }, +}; + +static void __init netspace_v2_gpio_leds_init(void) +{ + platform_device_register(&netspace_v2_gpio_leds); + + /* + * Configure the front blue LED to blink in relation with the SATA + * activity. + */ + if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, + "SATA blue LED slow") != 0) + return; + if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0) + goto err_free_1; + if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD, + "SATA blue LED command") != 0) + goto err_free_1; + if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0) + goto err_free_2; + + return; + +err_free_2: + gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD); +err_free_1: + gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW); + pr_err("netspace_v2: failed to configure SATA blue LED\n"); +} + +/***************************************************************************** + * Timer + ****************************************************************************/ + +static void netspace_v2_timer_init(void) +{ + kirkwood_tclk = 166666667; + orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); +} + +struct sys_timer netspace_v2_timer = { + .init = netspace_v2_timer_init, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static unsigned int netspace_v2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* Red led */ + MPP14_GPIO, /* USB fuse */ + MPP16_GPIO, /* SATA 0 power */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP24_GPIO, /* USB mode select */ + MPP25_GPIO, /* Fan rotation fail */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* Blue led (slow register) */ + MPP30_GPIO, /* Blue led (command register) */ + MPP31_GPIO, /* Board power off */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + 0 +}; + +#define NETSPACE_V2_GPIO_POWER_OFF 31 + +static void netspace_v2_power_off(void) +{ + gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1); +} + +static void __init netspace_v2_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(netspace_v2_mpp_config); + + netspace_v2_sata_power_init(); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&netspace_v2_ge00_data); + kirkwood_sata_init(&netspace_v2_sata_data); + kirkwood_uart0_init(); + spi_register_board_info(netspace_v2_spi_slave_info, + ARRAY_SIZE(netspace_v2_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_i2c_init(); + i2c_register_board_info(0, netspace_v2_i2c_info, + ARRAY_SIZE(netspace_v2_i2c_info)); + + netspace_v2_gpio_leds_init(); + platform_device_register(&netspace_v2_gpio_buttons); + + if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0) + pm_power_off = netspace_v2_power_off; + else + pr_err("netspace_v2: failed to configure power-off GPIO\n"); +} + +MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = netspace_v2_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &netspace_v2_timer, +MACHINE_END diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 1163944..9438bf6 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -18,6 +18,7 @@ #include <linux/gpio.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> +#include <linux/mtd/onenand.h> #include <linux/mtd/partitions.h> #include <linux/io.h> #include <asm/sizes.h> @@ -149,7 +150,7 @@ static struct mtd_partition nhk8815_onenand_partitions[] = { } }; -static struct flash_platform_data nhk8815_onenand_data = { +static struct onenand_platform_data nhk8815_onenand_data = { .parts = nhk8815_onenand_partitions, .nr_parts = ARRAY_SIZE(nhk8815_onenand_partitions), }; @@ -163,7 +164,7 @@ static struct resource nhk8815_onenand_resource[] = { }; static struct platform_device nhk8815_onenand_device = { - .name = "onenand", + .name = "onenand-flash", .id = -1, .dev = { .platform_data = &nhk8815_onenand_data, @@ -174,10 +175,10 @@ static struct platform_device nhk8815_onenand_device = { static void __init nhk8815_onenand_init(void) { -#ifdef CONFIG_ONENAND +#ifdef CONFIG_MTD_ONENAND /* Set up SMCS0 for OneNand */ - writel(0x000030db, FSMC_BCR0); - writel(0x02100551, FSMC_BTR0); + writel(0x000030db, FSMC_BCR(0)); + writel(0x02100551, FSMC_BTR(0)); #endif } diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 76c11ee..10eafa7 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -18,6 +18,7 @@ config ARCH_OMAP2430 config ARCH_OMAP34XX bool "OMAP34xx Based System" depends on ARCH_OMAP3 + select USB_ARCH_HAS_EHCI config ARCH_OMAP3430 bool "OMAP3430 support" diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 1591aae..2626a9f 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -29,7 +29,7 @@ #include <linux/gpio.h> #include <linux/i2c/at24.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <linux/regulator/machine.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 44239e3..117b8fd 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -19,7 +19,7 @@ #include <linux/interrupt.h> #include <linux/regulator/machine.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 18913e9..34de178 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -26,7 +26,7 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <linux/usb/otg.h> #include <linux/smsc911x.h> diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index c9e5ebb..fe3d22c 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -34,7 +34,7 @@ #include <linux/spi/ads7846.h> #include <linux/regulator/machine.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 17f3c91..acafdbc 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -16,7 +16,7 @@ #include <linux/spi/spi.h> #include <linux/spi/wl12xx.h> #include <linux/i2c.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/regulator/machine.h> diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 258794d..8dd277c 100755 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -14,7 +14,7 @@ #include <linux/input.h> #include <linux/input/matrix_keypad.h> #include <linux/gpio.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <linux/regulator/machine.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 39b797b..19805a7 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -640,12 +640,9 @@ void __init omap_serial_early_init(void) uart->num = i; p->private_data = uart; uart->p = p; - list_add_tail(&uart->node, &uart_list); if (cpu_is_omap44xx()) p->irq += 32; - - omap_uart_enable_clocks(uart); } } @@ -673,9 +670,13 @@ void __init omap_serial_init_port(int port) pdev = &uart->pdev; dev = &pdev->dev; + omap_uart_enable_clocks(uart); + omap_uart_reset(uart); omap_uart_idle_init(uart); + list_add_tail(&uart->node, &uart_list); + if (WARN_ON(platform_device_register(pdev))) return; diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index e6d8e10..8a0837e 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -110,6 +110,8 @@ config MACH_CM_X300 bool "CompuLab CM-X300 modules" select PXA3xx select CPU_PXA300 + select CPU_PXA310 + select HAVE_PWM config ARCH_GUMSTIX bool "Gumstix XScale 255 boards" @@ -240,7 +242,6 @@ config MACH_COLIBRI300 select PXA3xx select CPU_PXA300 select CPU_PXA310 - select HAVE_PWM config MACH_COLIBRI320 bool "Toradex Colibri PXA320" diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 3395463..8e10db1 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,7 +4,6 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <mach/hardware.h> #include <mach/udc.h> #include <mach/pxafb.h> #include <mach/mmc.h> @@ -14,6 +13,7 @@ #include <mach/pxa2xx_spi.h> #include <mach/camera.h> #include <mach/audio.h> +#include <mach/hardware.h> #include <plat/i2c.h> #include <plat/pxa3xx_nand.h> diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h index 193b39d..4d95883 100644 --- a/arch/arm/mach-s3c2410/include/mach/spi.h +++ b/arch/arm/mach-s3c2410/include/mach/spi.h @@ -18,6 +18,8 @@ struct s3c2410_spi_info { unsigned int num_cs; /* total chipselects */ int bus_num; /* bus number to use. */ + unsigned int use_fiq:1; /* use fiq */ + void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable); void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); }; diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h new file mode 100644 index 0000000..f4cfee9 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/coh901318.h @@ -0,0 +1,281 @@ +/* + * + * include/linux/coh901318.h + * + * + * Copyright (C) 2007-2009 ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + * DMA driver for COH 901 318 + * Author: Per Friden <per.friden@stericsson.com> + */ + +#ifndef COH901318_H +#define COH901318_H + +#include <linux/device.h> +#include <linux/dmaengine.h> + +#define MAX_DMA_PACKET_SIZE_SHIFT 11 +#define MAX_DMA_PACKET_SIZE (1 << MAX_DMA_PACKET_SIZE_SHIFT) + +/** + * struct coh901318_lli - linked list item for DMAC + * @control: control settings for DMAC + * @src_addr: transfer source address + * @dst_addr: transfer destination address + * @link_addr: physical address to next lli + * @virt_link_addr: virtual addres of next lli (only used by pool_free) + * @phy_this: physical address of current lli (only used by pool_free) + */ +struct coh901318_lli { + u32 control; + dma_addr_t src_addr; + dma_addr_t dst_addr; + dma_addr_t link_addr; + + void *virt_link_addr; + dma_addr_t phy_this; +}; +/** + * struct coh901318_params - parameters for DMAC configuration + * @config: DMA config register + * @ctrl_lli_last: DMA control register for the last lli in the list + * @ctrl_lli: DMA control register for an lli + * @ctrl_lli_chained: DMA control register for a chained lli + */ +struct coh901318_params { + u32 config; + u32 ctrl_lli_last; + u32 ctrl_lli; + u32 ctrl_lli_chained; +}; +/** + * struct coh_dma_channel - dma channel base + * @name: ascii name of dma channel + * @number: channel id number + * @desc_nbr_max: number of preallocated descriptortors + * @priority_high: prio of channel, 0 low otherwise high. + * @param: configuration parameters + * @dev_addr: physical address of periphal connected to channel + */ +struct coh_dma_channel { + const char name[32]; + const int number; + const int desc_nbr_max; + const int priority_high; + const struct coh901318_params param; + const dma_addr_t dev_addr; +}; + +/** + * dma_access_memory_state_t - register dma for memory access + * + * @dev: The dma device + * @active: 1 means dma intends to access memory + * 0 means dma wont access memory + */ +typedef void (*dma_access_memory_state_t)(struct device *dev, + bool active); + +/** + * struct powersave - DMA power save structure + * @lock: lock protecting data in this struct + * @started_channels: bit mask indicating active dma channels + */ +struct powersave { + spinlock_t lock; + u64 started_channels; +}; +/** + * struct coh901318_platform - platform arch structure + * @chans_slave: specifying dma slave channels + * @chans_memcpy: specifying dma memcpy channels + * @access_memory_state: requesting DMA memeory access (on / off) + * @chan_conf: dma channel configurations + * @max_channels: max number of dma chanenls + */ +struct coh901318_platform { + const int *chans_slave; + const int *chans_memcpy; + const dma_access_memory_state_t access_memory_state; + const struct coh_dma_channel *chan_conf; + const int max_channels; +}; + +/** + * coh901318_get_bytes_left() - Get number of bytes left on a current transfer + * @chan: dma channel handle + * return number of bytes left, or negative on error + */ +u32 coh901318_get_bytes_left(struct dma_chan *chan); + +/** + * coh901318_stop() - Stops dma transfer + * @chan: dma channel handle + * return 0 on success otherwise negative value + */ +void coh901318_stop(struct dma_chan *chan); + +/** + * coh901318_continue() - Resumes a stopped dma transfer + * @chan: dma channel handle + * return 0 on success otherwise negative value + */ +void coh901318_continue(struct dma_chan *chan); + +/** + * coh901318_filter_id() - DMA channel filter function + * @chan: dma channel handle + * @chan_id: id of dma channel to be filter out + * + * In dma_request_channel() it specifies what channel id to be requested + */ +bool coh901318_filter_id(struct dma_chan *chan, void *chan_id); + +/* + * DMA Controller - this access the static mappings of the coh901318 dma. + * + */ + +#define COH901318_MOD32_MASK (0x1F) +#define COH901318_WORD_MASK (0xFFFFFFFF) +/* INT_STATUS - Interrupt Status Registers 32bit (R/-) */ +#define COH901318_INT_STATUS1 (0x0000) +#define COH901318_INT_STATUS2 (0x0004) +/* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */ +#define COH901318_TC_INT_STATUS1 (0x0008) +#define COH901318_TC_INT_STATUS2 (0x000C) +/* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */ +#define COH901318_TC_INT_CLEAR1 (0x0010) +#define COH901318_TC_INT_CLEAR2 (0x0014) +/* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */ +#define COH901318_RAW_TC_INT_STATUS1 (0x0018) +#define COH901318_RAW_TC_INT_STATUS2 (0x001C) +/* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */ +#define COH901318_BE_INT_STATUS1 (0x0020) +#define COH901318_BE_INT_STATUS2 (0x0024) +/* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */ +#define COH901318_BE_INT_CLEAR1 (0x0028) +#define COH901318_BE_INT_CLEAR2 (0x002C) +/* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */ +#define COH901318_RAW_BE_INT_STATUS1 (0x0030) +#define COH901318_RAW_BE_INT_STATUS2 (0x0034) + +/* + * CX_CFG - Channel Configuration Registers 32bit (R/W) + */ +#define COH901318_CX_CFG (0x0100) +#define COH901318_CX_CFG_SPACING (0x04) +/* Channel enable activates tha dma job */ +#define COH901318_CX_CFG_CH_ENABLE (0x00000001) +#define COH901318_CX_CFG_CH_DISABLE (0x00000000) +/* Request Mode */ +#define COH901318_CX_CFG_RM_MASK (0x00000006) +#define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY (0x0 << 1) +#define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY (0x1 << 1) +#define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY (0x1 << 1) +#define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY (0x3 << 1) +#define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY (0x3 << 1) +/* Linked channel request field. RM must == 11 */ +#define COH901318_CX_CFG_LCRF_SHIFT 3 +#define COH901318_CX_CFG_LCRF_MASK (0x000001F8) +#define COH901318_CX_CFG_LCR_DISABLE (0x00000000) +/* Terminal Counter Interrupt Request Mask */ +#define COH901318_CX_CFG_TC_IRQ_ENABLE (0x00000200) +#define COH901318_CX_CFG_TC_IRQ_DISABLE (0x00000000) +/* Bus Error interrupt Mask */ +#define COH901318_CX_CFG_BE_IRQ_ENABLE (0x00000400) +#define COH901318_CX_CFG_BE_IRQ_DISABLE (0x00000000) + +/* + * CX_STAT - Channel Status Registers 32bit (R/-) + */ +#define COH901318_CX_STAT (0x0200) +#define COH901318_CX_STAT_SPACING (0x04) +#define COH901318_CX_STAT_RBE_IRQ_IND (0x00000008) +#define COH901318_CX_STAT_RTC_IRQ_IND (0x00000004) +#define COH901318_CX_STAT_ACTIVE (0x00000002) +#define COH901318_CX_STAT_ENABLED (0x00000001) + +/* + * CX_CTRL - Channel Control Registers 32bit (R/W) + */ +#define COH901318_CX_CTRL (0x0400) +#define COH901318_CX_CTRL_SPACING (0x10) +/* Transfer Count Enable */ +#define COH901318_CX_CTRL_TC_ENABLE (0x00001000) +#define COH901318_CX_CTRL_TC_DISABLE (0x00000000) +/* Transfer Count Value 0 - 4095 */ +#define COH901318_CX_CTRL_TC_VALUE_MASK (0x00000FFF) +/* Burst count */ +#define COH901318_CX_CTRL_BURST_COUNT_MASK (0x0000E000) +#define COH901318_CX_CTRL_BURST_COUNT_64_BYTES (0x7 << 13) +#define COH901318_CX_CTRL_BURST_COUNT_48_BYTES (0x6 << 13) +#define COH901318_CX_CTRL_BURST_COUNT_32_BYTES (0x5 << 13) +#define COH901318_CX_CTRL_BURST_COUNT_16_BYTES (0x4 << 13) +#define COH901318_CX_CTRL_BURST_COUNT_8_BYTES (0x3 << 13) +#define COH901318_CX_CTRL_BURST_COUNT_4_BYTES (0x2 << 13) +#define COH901318_CX_CTRL_BURST_COUNT_2_BYTES (0x1 << 13) +#define COH901318_CX_CTRL_BURST_COUNT_1_BYTE (0x0 << 13) +/* Source bus size */ +#define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK (0x00030000) +#define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS (0x2 << 16) +#define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS (0x1 << 16) +#define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS (0x0 << 16) +/* Source address increment */ +#define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE (0x00040000) +#define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE (0x00000000) +/* Destination Bus Size */ +#define COH901318_CX_CTRL_DST_BUS_SIZE_MASK (0x00180000) +#define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS (0x2 << 19) +#define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS (0x1 << 19) +#define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS (0x0 << 19) +/* Destination address increment */ +#define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE (0x00200000) +#define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE (0x00000000) +/* Master Mode (Master2 is only connected to MSL) */ +#define COH901318_CX_CTRL_MASTER_MODE_MASK (0x00C00000) +#define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W (0x3 << 22) +#define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W (0x2 << 22) +#define COH901318_CX_CTRL_MASTER_MODE_M2RW (0x1 << 22) +#define COH901318_CX_CTRL_MASTER_MODE_M1RW (0x0 << 22) +/* Terminal Count flag to PER enable */ +#define COH901318_CX_CTRL_TCP_ENABLE (0x01000000) +#define COH901318_CX_CTRL_TCP_DISABLE (0x00000000) +/* Terminal Count flags to CPU enable */ +#define COH901318_CX_CTRL_TC_IRQ_ENABLE (0x02000000) +#define COH901318_CX_CTRL_TC_IRQ_DISABLE (0x00000000) +/* Hand shake to peripheral */ +#define COH901318_CX_CTRL_HSP_ENABLE (0x04000000) +#define COH901318_CX_CTRL_HSP_DISABLE (0x00000000) +#define COH901318_CX_CTRL_HSS_ENABLE (0x08000000) +#define COH901318_CX_CTRL_HSS_DISABLE (0x00000000) +/* DMA mode */ +#define COH901318_CX_CTRL_DDMA_MASK (0x30000000) +#define COH901318_CX_CTRL_DDMA_LEGACY (0x0 << 28) +#define COH901318_CX_CTRL_DDMA_DEMAND_DMA1 (0x1 << 28) +#define COH901318_CX_CTRL_DDMA_DEMAND_DMA2 (0x2 << 28) +/* Primary Request Data Destination */ +#define COH901318_CX_CTRL_PRDD_MASK (0x40000000) +#define COH901318_CX_CTRL_PRDD_DEST (0x1 << 30) +#define COH901318_CX_CTRL_PRDD_SOURCE (0x0 << 30) + +/* + * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W) + */ +#define COH901318_CX_SRC_ADDR (0x0404) +#define COH901318_CX_SRC_ADDR_SPACING (0x10) + +/* + * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W + */ +#define COH901318_CX_DST_ADDR (0x0408) +#define COH901318_CX_DST_ADDR_SPACING (0x10) + +/* + * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W) + */ +#define COH901318_CX_LNK_ADDR (0x040C) +#define COH901318_CX_LNK_ADDR_SPACING (0x10) +#define COH901318_CX_LNK_LINK_IMMEDIATE (0x00000001) +#endif /* COH901318_H */ diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c index 921cef9..20dc0c9 100644 --- a/arch/arm/mach-w90x900/cpu.c +++ b/arch/arm/mach-w90x900/cpu.c @@ -96,6 +96,7 @@ static struct clk_lookup nuc900_clkregs[] = { struct plat_serial8250_port nuc900_uart_data[] = { NUC900_8250PORT(UART0), + {}, }; struct platform_device nuc900_serial_device = { diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index 51f17b7..ec711f4 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -197,7 +197,7 @@ static struct platform_device nuc900_device_emc = { /* SPI device */ -static struct w90p910_spi_info nuc900_spiflash_data = { +static struct nuc900_spi_info nuc900_spiflash_data = { .num_cs = 1, .lsb = 0, .txneg = 1, diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h index 050d9fe..56f1a74 100644 --- a/arch/arm/mach-w90x900/include/mach/uncompress.h +++ b/arch/arm/mach-w90x900/include/mach/uncompress.h @@ -22,11 +22,21 @@ #include <mach/regs-serial.h> #include <mach/map.h> +#include <linux/serial_reg.h> #define arch_decomp_wdog() +#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) +static volatile u32 * uart_base = (u32 *)UART0_PA; + static void putc(int ch) { + /* Check THRE and TEMT bits before we transmit the character. + */ + while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) + barrier(); + + *uart_base = ch; } static inline void flush(void) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index dd4698c..baf6384 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -1,9 +1,5 @@ comment "Processor Type" -config CPU_32 - bool - default y - # Select CPU types depending on the architecture selected. This selects # which CPUs we support in the kernel image, and the compiler instruction # optimiser behaviour. diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S index b63a8f7..a89444a 100644 --- a/arch/arm/mm/cache-fa.S +++ b/arch/arm/mm/cache-fa.S @@ -127,15 +127,16 @@ ENTRY(fa_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(kaddr) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure that the data held in the page kaddr is written back * to the page in question. * - * - kaddr - kernel address (guaranteed to be page aligned) + * - addr - kernel address + * - size - size of region */ -ENTRY(fa_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(fa_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -213,7 +214,7 @@ ENTRY(fa_cache_fns) .long fa_flush_user_cache_range .long fa_coherent_kern_range .long fa_coherent_user_range - .long fa_flush_kern_dcache_page + .long fa_flush_kern_dcache_area .long fa_dma_inv_range .long fa_dma_clean_range .long fa_dma_flush_range diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 747f9a9..cb8fc65 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -28,69 +28,120 @@ static void __iomem *l2x0_base; static DEFINE_SPINLOCK(l2x0_lock); -static inline void sync_writel(unsigned long val, unsigned long reg, - unsigned long complete_mask) +static inline void cache_wait(void __iomem *reg, unsigned long mask) { - unsigned long flags; - - spin_lock_irqsave(&l2x0_lock, flags); - writel(val, l2x0_base + reg); /* wait for the operation to complete */ - while (readl(l2x0_base + reg) & complete_mask) + while (readl(reg) & mask) ; - spin_unlock_irqrestore(&l2x0_lock, flags); } static inline void cache_sync(void) { - sync_writel(0, L2X0_CACHE_SYNC, 1); + void __iomem *base = l2x0_base; + writel(0, base + L2X0_CACHE_SYNC); + cache_wait(base + L2X0_CACHE_SYNC, 1); } static inline void l2x0_inv_all(void) { + unsigned long flags; + /* invalidate all ways */ - sync_writel(0xff, L2X0_INV_WAY, 0xff); + spin_lock_irqsave(&l2x0_lock, flags); + writel(0xff, l2x0_base + L2X0_INV_WAY); + cache_wait(l2x0_base + L2X0_INV_WAY, 0xff); cache_sync(); + spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_inv_range(unsigned long start, unsigned long end) { - unsigned long addr; + void __iomem *base = l2x0_base; + unsigned long flags; + spin_lock_irqsave(&l2x0_lock, flags); if (start & (CACHE_LINE_SIZE - 1)) { start &= ~(CACHE_LINE_SIZE - 1); - sync_writel(start, L2X0_CLEAN_INV_LINE_PA, 1); + cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); + writel(start, base + L2X0_CLEAN_INV_LINE_PA); start += CACHE_LINE_SIZE; } if (end & (CACHE_LINE_SIZE - 1)) { end &= ~(CACHE_LINE_SIZE - 1); - sync_writel(end, L2X0_CLEAN_INV_LINE_PA, 1); + cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); + writel(end, base + L2X0_CLEAN_INV_LINE_PA); } - for (addr = start; addr < end; addr += CACHE_LINE_SIZE) - sync_writel(addr, L2X0_INV_LINE_PA, 1); + while (start < end) { + unsigned long blk_end = start + min(end - start, 4096UL); + + while (start < blk_end) { + cache_wait(base + L2X0_INV_LINE_PA, 1); + writel(start, base + L2X0_INV_LINE_PA); + start += CACHE_LINE_SIZE; + } + + if (blk_end < end) { + spin_unlock_irqrestore(&l2x0_lock, flags); + spin_lock_irqsave(&l2x0_lock, flags); + } + } + cache_wait(base + L2X0_INV_LINE_PA, 1); cache_sync(); + spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_clean_range(unsigned long start, unsigned long end) { - unsigned long addr; + void __iomem *base = l2x0_base; + unsigned long flags; + spin_lock_irqsave(&l2x0_lock, flags); start &= ~(CACHE_LINE_SIZE - 1); - for (addr = start; addr < end; addr += CACHE_LINE_SIZE) - sync_writel(addr, L2X0_CLEAN_LINE_PA, 1); + while (start < end) { + unsigned long blk_end = start + min(end - start, 4096UL); + + while (start < blk_end) { + cache_wait(base + L2X0_CLEAN_LINE_PA, 1); + writel(start, base + L2X0_CLEAN_LINE_PA); + start += CACHE_LINE_SIZE; + } + + if (blk_end < end) { + spin_unlock_irqrestore(&l2x0_lock, flags); + spin_lock_irqsave(&l2x0_lock, flags); + } + } + cache_wait(base + L2X0_CLEAN_LINE_PA, 1); cache_sync(); + spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2x0_flush_range(unsigned long start, unsigned long end) { - unsigned long addr; + void __iomem *base = l2x0_base; + unsigned long flags; + spin_lock_irqsave(&l2x0_lock, flags); start &= ~(CACHE_LINE_SIZE - 1); - for (addr = start; addr < end; addr += CACHE_LINE_SIZE) - sync_writel(addr, L2X0_CLEAN_INV_LINE_PA, 1); + while (start < end) { + unsigned long blk_end = start + min(end - start, 4096UL); + + while (start < blk_end) { + cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); + writel(start, base + L2X0_CLEAN_INV_LINE_PA); + start += CACHE_LINE_SIZE; + } + + if (blk_end < end) { + spin_unlock_irqrestore(&l2x0_lock, flags); + spin_lock_irqsave(&l2x0_lock, flags); + } + } + cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); cache_sync(); + spin_unlock_irqrestore(&l2x0_lock, flags); } void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S index 8a4abeb..2a48273 100644 --- a/arch/arm/mm/cache-v3.S +++ b/arch/arm/mm/cache-v3.S @@ -72,14 +72,15 @@ ENTRY(v3_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *page, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(v3_flush_kern_dcache_page) +ENTRY(v3_flush_kern_dcache_area) /* FALLTHROUGH */ /* @@ -129,7 +130,7 @@ ENTRY(v3_cache_fns) .long v3_flush_user_cache_range .long v3_coherent_kern_range .long v3_coherent_user_range - .long v3_flush_kern_dcache_page + .long v3_flush_kern_dcache_area .long v3_dma_inv_range .long v3_dma_clean_range .long v3_dma_flush_range diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S index 3668611..5c7da3e 100644 --- a/arch/arm/mm/cache-v4.S +++ b/arch/arm/mm/cache-v4.S @@ -82,14 +82,15 @@ ENTRY(v4_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(v4_flush_kern_dcache_page) +ENTRY(v4_flush_kern_dcache_area) /* FALLTHROUGH */ /* @@ -141,7 +142,7 @@ ENTRY(v4_cache_fns) .long v4_flush_user_cache_range .long v4_coherent_kern_range .long v4_coherent_user_range - .long v4_flush_kern_dcache_page + .long v4_flush_kern_dcache_area .long v4_dma_inv_range .long v4_dma_clean_range .long v4_dma_flush_range diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S index 2ebc1b3..3dbedf1e 100644 --- a/arch/arm/mm/cache-v4wb.S +++ b/arch/arm/mm/cache-v4wb.S @@ -114,15 +114,16 @@ ENTRY(v4wb_flush_user_cache_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(v4wb_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(v4wb_flush_kern_dcache_area) + add r1, r0, r1 /* fall through */ /* @@ -224,7 +225,7 @@ ENTRY(v4wb_cache_fns) .long v4wb_flush_user_cache_range .long v4wb_coherent_kern_range .long v4wb_coherent_user_range - .long v4wb_flush_kern_dcache_page + .long v4wb_flush_kern_dcache_area .long v4wb_dma_inv_range .long v4wb_dma_clean_range .long v4wb_dma_flush_range diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S index c54fa2c..b3b7410 100644 --- a/arch/arm/mm/cache-v4wt.S +++ b/arch/arm/mm/cache-v4wt.S @@ -117,17 +117,18 @@ ENTRY(v4wt_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(v4wt_flush_kern_dcache_page) +ENTRY(v4wt_flush_kern_dcache_area) mov r2, #0 mcr p15, 0, r2, c7, c5, 0 @ invalidate I cache - add r1, r0, #PAGE_SZ + add r1, r0, r1 /* fallthrough */ /* @@ -180,7 +181,7 @@ ENTRY(v4wt_cache_fns) .long v4wt_flush_user_cache_range .long v4wt_coherent_kern_range .long v4wt_coherent_user_range - .long v4wt_flush_kern_dcache_page + .long v4wt_flush_kern_dcache_area .long v4wt_dma_inv_range .long v4wt_dma_clean_range .long v4wt_dma_flush_range diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 295e25d..4ba0a24 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -159,15 +159,16 @@ ENDPROC(v6_coherent_user_range) ENDPROC(v6_coherent_kern_range) /* - * v6_flush_kern_dcache_page(kaddr) + * v6_flush_kern_dcache_area(void *addr, size_t size) * * Ensure that the data held in the page kaddr is written back * to the page in question. * - * - kaddr - kernel address (guaranteed to be page aligned) + * - addr - kernel address + * - size - region size */ -ENTRY(v6_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(v6_flush_kern_dcache_area) + add r1, r0, r1 1: #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line @@ -271,7 +272,7 @@ ENTRY(v6_cache_fns) .long v6_flush_user_cache_range .long v6_coherent_kern_range .long v6_coherent_user_range - .long v6_flush_kern_dcache_page + .long v6_flush_kern_dcache_area .long v6_dma_inv_range .long v6_dma_clean_range .long v6_dma_flush_range diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index e1bd975..9073db8 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -186,16 +186,17 @@ ENDPROC(v7_coherent_kern_range) ENDPROC(v7_coherent_user_range) /* - * v7_flush_kern_dcache_page(kaddr) + * v7_flush_kern_dcache_area(void *addr, size_t size) * * Ensure that the data held in the page kaddr is written back * to the page in question. * - * - kaddr - kernel address (guaranteed to be page aligned) + * - addr - kernel address + * - size - region size */ -ENTRY(v7_flush_kern_dcache_page) +ENTRY(v7_flush_kern_dcache_area) dcache_line_size r2, r3 - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 @@ -203,7 +204,7 @@ ENTRY(v7_flush_kern_dcache_page) blo 1b dsb mov pc, lr -ENDPROC(v7_flush_kern_dcache_page) +ENDPROC(v7_flush_kern_dcache_area) /* * v7_dma_inv_range(start,end) @@ -279,7 +280,7 @@ ENTRY(v7_cache_fns) .long v7_flush_user_cache_range .long v7_coherent_kern_range .long v7_coherent_user_range - .long v7_flush_kern_dcache_page + .long v7_flush_kern_dcache_area .long v7_dma_inv_range .long v7_dma_clean_range .long v7_dma_flush_range diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 841f355..0fa1319 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -48,7 +48,7 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to, */ if (page_address(to) != NULL) #endif - __cpuc_flush_dcache_page(kto); + __cpuc_flush_dcache_area(kto, PAGE_SIZE); kunmap_atomic(kto, KM_USER1); kunmap_atomic(kfrom, KM_USER0); } diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 7296022..56ee153 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -207,9 +207,8 @@ void __init check_writebuffer_bugs(void) page = alloc_page(GFP_KERNEL); if (page) { unsigned long *p1, *p2; - pgprot_t prot = __pgprot(L_PTE_PRESENT|L_PTE_YOUNG| - L_PTE_DIRTY|L_PTE_WRITE| - L_PTE_MT_BUFFERABLE); + pgprot_t prot = __pgprot_modify(PAGE_KERNEL, + L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE); p1 = vmap(&page, 1, VM_IOREMAP, prot); p2 = vmap(&page, 1, VM_IOREMAP, prot); diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 329594e..6f3a4b7 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -131,7 +131,7 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page) */ if (addr) #endif - __cpuc_flush_dcache_page(addr); + __cpuc_flush_dcache_area(addr, PAGE_SIZE); /* * If this is a page cache page, and we have an aliasing VIPT cache, @@ -258,5 +258,5 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l * in this mapping of the page. FIXME: this is overkill * since we actually ask for a write-back and invalidate. */ - __cpuc_flush_dcache_page(page_address(page)); + __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index 30f82fb..2be1ec7 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -79,7 +79,7 @@ void kunmap_atomic(void *kvaddr, enum km_type type) unsigned int idx = type + KM_TYPE_NR * smp_processor_id(); if (kvaddr >= (void *)FIXADDR_START) { - __cpuc_flush_dcache_page((void *)vaddr); + __cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE); #ifdef CONFIG_DEBUG_HIGHMEM BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); set_pte_ext(TOP_PTE(vaddr), __pte(0), 0); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 8c7fbd1..1708da8 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -453,8 +453,7 @@ static void __init build_mem_type_table(void) pgprot_user = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot); pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | - L_PTE_DIRTY | L_PTE_WRITE | - L_PTE_EXEC | kern_pgprot); + L_PTE_DIRTY | L_PTE_WRITE | kern_pgprot); mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask; mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask; diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 900811c..374a831 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -61,7 +61,7 @@ void setup_mm_for_reboot(char mode) void flush_dcache_page(struct page *page) { - __cpuc_flush_dcache_page(page_address(page)); + __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } EXPORT_SYMBOL(flush_dcache_page); diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index d9fb4b9..8012e24 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -231,17 +231,18 @@ ENTRY(arm1020_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - page - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm1020_flush_kern_dcache_page) +ENTRY(arm1020_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry mcr p15, 0, ip, c7, c10, 4 @ drain WB add r0, r0, #CACHE_DLINESIZE @@ -335,7 +336,7 @@ ENTRY(arm1020_cache_fns) .long arm1020_flush_user_cache_range .long arm1020_coherent_kern_range .long arm1020_coherent_user_range - .long arm1020_flush_kern_dcache_page + .long arm1020_flush_kern_dcache_area .long arm1020_dma_inv_range .long arm1020_dma_clean_range .long arm1020_dma_flush_range diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 7453b75..41fe25d 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -225,17 +225,18 @@ ENTRY(arm1020e_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - page - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm1020e_flush_kern_dcache_page) +ENTRY(arm1020e_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -321,7 +322,7 @@ ENTRY(arm1020e_cache_fns) .long arm1020e_flush_user_cache_range .long arm1020e_coherent_kern_range .long arm1020e_coherent_user_range - .long arm1020e_flush_kern_dcache_page + .long arm1020e_flush_kern_dcache_area .long arm1020e_dma_inv_range .long arm1020e_dma_clean_range .long arm1020e_dma_flush_range diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 8eb72d7..20a5b1b 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -214,17 +214,18 @@ ENTRY(arm1022_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - page - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm1022_flush_kern_dcache_page) +ENTRY(arm1022_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -310,7 +311,7 @@ ENTRY(arm1022_cache_fns) .long arm1022_flush_user_cache_range .long arm1022_coherent_kern_range .long arm1022_coherent_user_range - .long arm1022_flush_kern_dcache_page + .long arm1022_flush_kern_dcache_area .long arm1022_dma_inv_range .long arm1022_dma_clean_range .long arm1022_dma_flush_range diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 3b59f0d..96aedb1 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -208,17 +208,18 @@ ENTRY(arm1026_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - page - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm1026_flush_kern_dcache_page) +ENTRY(arm1026_flush_kern_dcache_area) mov ip, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE - add r1, r0, #PAGE_SZ + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -304,7 +305,7 @@ ENTRY(arm1026_cache_fns) .long arm1026_flush_user_cache_range .long arm1026_coherent_kern_range .long arm1026_coherent_user_range - .long arm1026_flush_kern_dcache_page + .long arm1026_flush_kern_dcache_area .long arm1026_dma_inv_range .long arm1026_dma_clean_range .long arm1026_dma_flush_range diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 2b7c197..471669e 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -207,15 +207,16 @@ ENTRY(arm920_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm920_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(arm920_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -293,7 +294,7 @@ ENTRY(arm920_cache_fns) .long arm920_flush_user_cache_range .long arm920_coherent_kern_range .long arm920_coherent_user_range - .long arm920_flush_kern_dcache_page + .long arm920_flush_kern_dcache_area .long arm920_dma_inv_range .long arm920_dma_clean_range .long arm920_dma_flush_range diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 06a1aa4..ee111b0 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -209,15 +209,16 @@ ENTRY(arm922_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm922_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(arm922_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -295,7 +296,7 @@ ENTRY(arm922_cache_fns) .long arm922_flush_user_cache_range .long arm922_coherent_kern_range .long arm922_coherent_user_range - .long arm922_flush_kern_dcache_page + .long arm922_flush_kern_dcache_area .long arm922_dma_inv_range .long arm922_dma_clean_range .long arm922_dma_flush_range diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index cb53435..8deb5bd 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -251,15 +251,16 @@ ENTRY(arm925_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm925_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(arm925_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -346,7 +347,7 @@ ENTRY(arm925_cache_fns) .long arm925_flush_user_cache_range .long arm925_coherent_kern_range .long arm925_coherent_user_range - .long arm925_flush_kern_dcache_page + .long arm925_flush_kern_dcache_area .long arm925_dma_inv_range .long arm925_dma_clean_range .long arm925_dma_flush_range diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 1c48487..64db6e2 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -214,15 +214,16 @@ ENTRY(arm926_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm926_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(arm926_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -309,7 +310,7 @@ ENTRY(arm926_cache_fns) .long arm926_flush_user_cache_range .long arm926_coherent_kern_range .long arm926_coherent_user_range - .long arm926_flush_kern_dcache_page + .long arm926_flush_kern_dcache_area .long arm926_dma_inv_range .long arm926_dma_clean_range .long arm926_dma_flush_range diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 5b0f846..8196b9f 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -141,14 +141,15 @@ ENTRY(arm940_coherent_user_range) /* FALLTHROUGH */ /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(arm940_flush_kern_dcache_page) +ENTRY(arm940_flush_kern_dcache_area) mov ip, #0 mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments 1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries @@ -238,7 +239,7 @@ ENTRY(arm940_cache_fns) .long arm940_flush_user_cache_range .long arm940_coherent_kern_range .long arm940_coherent_user_range - .long arm940_flush_kern_dcache_page + .long arm940_flush_kern_dcache_area .long arm940_dma_inv_range .long arm940_dma_clean_range .long arm940_dma_flush_range diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 40c0449..9a95123 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -183,16 +183,17 @@ ENTRY(arm946_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size * (same as arm926) */ -ENTRY(arm946_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(arm946_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -280,7 +281,7 @@ ENTRY(arm946_cache_fns) .long arm946_flush_user_cache_range .long arm946_coherent_kern_range .long arm946_coherent_user_range - .long arm946_flush_kern_dcache_page + .long arm946_flush_kern_dcache_area .long arm946_dma_inv_range .long arm946_dma_clean_range .long arm946_dma_flush_range diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index d0d7795..dbc3938 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -226,16 +226,17 @@ ENTRY(feroceon_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ .align 5 -ENTRY(feroceon_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(feroceon_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -246,7 +247,7 @@ ENTRY(feroceon_flush_kern_dcache_page) mov pc, lr .align 5 -ENTRY(feroceon_range_flush_kern_dcache_page) +ENTRY(feroceon_range_flush_kern_dcache_area) mrs r2, cpsr add r1, r0, #PAGE_SZ - CACHE_DLINESIZE @ top addr is inclusive orr r3, r2, #PSR_I_BIT @@ -372,7 +373,7 @@ ENTRY(feroceon_cache_fns) .long feroceon_flush_user_cache_range .long feroceon_coherent_kern_range .long feroceon_coherent_user_range - .long feroceon_flush_kern_dcache_page + .long feroceon_flush_kern_dcache_area .long feroceon_dma_inv_range .long feroceon_dma_clean_range .long feroceon_dma_flush_range @@ -383,7 +384,7 @@ ENTRY(feroceon_range_cache_fns) .long feroceon_flush_user_cache_range .long feroceon_coherent_kern_range .long feroceon_coherent_user_range - .long feroceon_range_flush_kern_dcache_page + .long feroceon_range_flush_kern_dcache_area .long feroceon_range_dma_inv_range .long feroceon_range_dma_clean_range .long feroceon_range_dma_flush_range diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 52b5fd7..9674d36 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -186,15 +186,16 @@ ENTRY(mohawk_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(mohawk_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(mohawk_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 @@ -273,7 +274,7 @@ ENTRY(mohawk_cache_fns) .long mohawk_flush_user_cache_range .long mohawk_coherent_kern_range .long mohawk_coherent_user_range - .long mohawk_flush_kern_dcache_page + .long mohawk_flush_kern_dcache_area .long mohawk_dma_inv_range .long mohawk_dma_clean_range .long mohawk_dma_flush_range diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index ac5c800..3e6210b 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -27,8 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all); EXPORT_SYMBOL(__cpuc_flush_user_all); EXPORT_SYMBOL(__cpuc_flush_user_range); EXPORT_SYMBOL(__cpuc_coherent_kern_range); -EXPORT_SYMBOL(__cpuc_flush_dcache_page); -EXPORT_SYMBOL(dmac_inv_range); /* because of flush_ioremap_region() */ +EXPORT_SYMBOL(__cpuc_flush_dcache_area); #else EXPORT_SYMBOL(cpu_cache); #endif diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 5485c82..395cc90 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -254,10 +254,9 @@ __pj4_v6_proc_info: .long 0x560f5810 .long 0xff0ffff0 .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ + PMD_SECT_AP_READ | \ + PMD_FLAGS .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index fab134e..96456f5 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -226,15 +226,16 @@ ENTRY(xsc3_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache. * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(xsc3_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(xsc3_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line add r0, r0, #CACHELINESIZE cmp r0, r1 @@ -309,7 +310,7 @@ ENTRY(xsc3_cache_fns) .long xsc3_flush_user_cache_range .long xsc3_coherent_kern_range .long xsc3_coherent_user_range - .long xsc3_flush_kern_dcache_page + .long xsc3_flush_kern_dcache_area .long xsc3_dma_inv_range .long xsc3_dma_clean_range .long xsc3_dma_flush_range diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index f056c28..93df472 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -284,15 +284,16 @@ ENTRY(xscale_coherent_user_range) mov pc, lr /* - * flush_kern_dcache_page(void *page) + * flush_kern_dcache_area(void *addr, size_t size) * * Ensure no D cache aliasing occurs, either with itself or * the I cache * - * - addr - page aligned address + * - addr - kernel address + * - size - region size */ -ENTRY(xscale_flush_kern_dcache_page) - add r1, r0, #PAGE_SZ +ENTRY(xscale_flush_kern_dcache_area) + add r1, r0, r1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry add r0, r0, #CACHELINESIZE @@ -368,7 +369,7 @@ ENTRY(xscale_cache_fns) .long xscale_flush_user_cache_range .long xscale_coherent_kern_range .long xscale_coherent_user_range - .long xscale_flush_kern_dcache_page + .long xscale_flush_kern_dcache_area .long xscale_dma_inv_range .long xscale_dma_clean_range .long xscale_dma_flush_range @@ -392,7 +393,7 @@ ENTRY(xscale_80200_A0_A1_cache_fns) .long xscale_flush_user_cache_range .long xscale_coherent_kern_range .long xscale_coherent_user_range - .long xscale_flush_kern_dcache_page + .long xscale_flush_kern_dcache_area .long xscale_dma_flush_range .long xscale_dma_clean_range .long xscale_dma_flush_range diff --git a/arch/arm/nwfpe/Makefile b/arch/arm/nwfpe/Makefile index b29178c..deb3a82 100644 --- a/arch/arm/nwfpe/Makefile +++ b/arch/arm/nwfpe/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_FPE_NWFPE) += nwfpe.o nwfpe-y += fpa11.o fpa11_cpdo.o fpa11_cpdt.o \ fpa11_cprt.o fpmodule.o fpopcode.o \ - softfloat.o single_cpdo.o double_cpdo.o + softfloat.o single_cpdo.o double_cpdo.o \ + entry.o nwfpe-$(CONFIG_FPE_NWFPE_XP) += extended_cpdo.o -nwfpe-$(CONFIG_CPU_32) += entry.o diff --git a/arch/arm/oprofile/op_model_v7.c b/arch/arm/oprofile/op_model_v7.c index f20295f..2088a6c 100644 --- a/arch/arm/oprofile/op_model_v7.c +++ b/arch/arm/oprofile/op_model_v7.c @@ -191,12 +191,8 @@ int armv7_setup_pmnc(void) return -EBUSY; } - /* - * Initialize & Reset PMNC: C bit, D bit and P bit. - * Note: Using a slower count for CCNT (D bit: divide by 64) results - * in a more stable system - */ - armv7_pmnc_write(PMNC_P | PMNC_C | PMNC_D); + /* Initialize & Reset PMNC: C bit and P bit */ + armv7_pmnc_write(PMNC_P | PMNC_C); for (cnt = CCNT; cnt < CNTMAX; cnt++) { diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h index 2b972df..5d2d21d 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_nand.h +++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h @@ -22,6 +22,7 @@ struct mxc_nand_platform_data { int width; /* data bus width in bytes */ - int hw_ecc; /* 0 if supress hardware ECC */ + int hw_ecc:1; /* 0 if supress hardware ECC */ + int flash_bbt:1; /* set to 1 to use a flash based bbt */ }; #endif /* __ASM_ARCH_NAND_H */ diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h index 0659859..226147b 100644 --- a/arch/arm/plat-s3c/include/plat/nand.h +++ b/arch/arm/plat-s3c/include/plat/nand.h @@ -17,6 +17,7 @@ * Setting this flag will allow the kernel to * look for it at boot time and also skip the NAND * scan. + * @options: Default value to set into 'struct nand_chip' options. * @nr_chips: Number of chips in this set * @nr_partitions: Number of partitions pointed to by @partitions * @name: Name of set (optional) @@ -31,6 +32,7 @@ struct s3c2410_nand_set { unsigned int disable_ecc:1; unsigned int flash_bbt:1; + unsigned int options; int nr_chips; int nr_partitions; char *name; diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile index 1dbaa29..635cb18 100644 --- a/arch/arm/tools/Makefile +++ b/arch/arm/tools/Makefile @@ -4,7 +4,7 @@ # Copyright (C) 2001 Russell King # -include/asm-arm/mach-types.h: $(src)/gen-mach-types $(src)/mach-types +include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types @echo ' Generating $@' @mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/arm/tools/gen-mach-types b/arch/arm/tools/gen-mach-types index ce319ef..04fef71 100644 --- a/arch/arm/tools/gen-mach-types +++ b/arch/arm/tools/gen-mach-types @@ -1,6 +1,6 @@ #!/bin/awk # -# Awk script to generate include/asm-arm/mach-types.h +# Awk script to generate include/generated/mach-types.h # BEGIN { nr = 0 } /^#/ { next } diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 07b976d..c3a74ce 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Wed Nov 25 22:14:58 2009 +# Last update: Wed Dec 16 20:06:34 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -1776,6 +1776,7 @@ cybook3 MACH_CYBOOK3 CYBOOK3 1784 wdg002 MACH_WDG002 WDG002 1785 sg560adsl MACH_SG560ADSL SG560ADSL 1786 nextio_n2800_ica MACH_NEXTIO_N2800_ICA NEXTIO_N2800_ICA 1787 +dove_db MACH_DOVE_DB DOVE_DB 1788 marvell_newdb MACH_MARVELL_NEWDB MARVELL_NEWDB 1789 vandihud MACH_VANDIHUD VANDIHUD 1790 magx_e8 MACH_MAGX_E8 MAGX_E8 1791 @@ -2536,3 +2537,44 @@ c3ax03 MACH_C3AX03 C3AX03 2549 mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 esyx MACH_ESYX ESYX 2551 bulldog MACH_BULLDOG BULLDOG 2553 +derell_me2000 MACH_DERELL_ME2000 DERELL_ME2000 2554 +bcmring_base MACH_BCMRING_BASE BCMRING_BASE 2555 +bcmring_evm MACH_BCMRING_EVM BCMRING_EVM 2556 +bcmring_evm_jazz MACH_BCMRING_EVM_JAZZ BCMRING_EVM_JAZZ 2557 +bcmring_sp MACH_BCMRING_SP BCMRING_SP 2558 +bcmring_sv MACH_BCMRING_SV BCMRING_SV 2559 +bcmring_sv_jazz MACH_BCMRING_SV_JAZZ BCMRING_SV_JAZZ 2560 +bcmring_tablet MACH_BCMRING_TABLET BCMRING_TABLET 2561 +bcmring_vp MACH_BCMRING_VP BCMRING_VP 2562 +bcmring_evm_seikor MACH_BCMRING_EVM_SEIKOR BCMRING_EVM_SEIKOR 2563 +bcmring_sp_wqvga MACH_BCMRING_SP_WQVGA BCMRING_SP_WQVGA 2564 +bcmring_custom MACH_BCMRING_CUSTOM BCMRING_CUSTOM 2565 +acer_s200 MACH_ACER_S200 ACER_S200 2566 +bt270 MACH_BT270 BT270 2567 +iseo MACH_ISEO ISEO 2568 +cezanne MACH_CEZANNE CEZANNE 2569 +lucca MACH_LUCCA LUCCA 2570 +supersmart MACH_SUPERSMART SUPERSMART 2571 +magnolia2 MACH_MAGNOLIA2 MAGNOLIA2 2573 +emxx MACH_EMXX EMXX 2574 +outlaw MACH_OUTLAW OUTLAW 2575 +riot_bei2 MACH_RIOT_BEI2 RIOT_BEI2 2576 +riot_vox MACH_RIOT_VOX RIOT_VOX 2577 +riot_x37 MACH_RIOT_X37 RIOT_X37 2578 +mega25mx MACH_MEGA25MX MEGA25MX 2579 +benzina2 MACH_BENZINA2 BENZINA2 2580 +ignite MACH_IGNITE IGNITE 2581 +foggia MACH_FOGGIA FOGGIA 2582 +arezzo MACH_AREZZO AREZZO 2583 +leica_skywalker MACH_LEICA_SKYWALKER LEICA_SKYWALKER 2584 +jacinto2_jamr MACH_JACINTO2_JAMR JACINTO2_JAMR 2585 +gts_nova MACH_GTS_NOVA GTS_NOVA 2586 +p3600 MACH_P3600 P3600 2587 +dlt2 MACH_DLT2 DLT2 2588 +df3120 MACH_DF3120 DF3120 2589 +ecucore_9g20 MACH_ECUCORE_9G20 ECUCORE_9G20 2590 +nautel_lpc3240 MACH_NAUTEL_LPC3240 NAUTEL_LPC3240 2591 +glacier MACH_GLACIER GLACIER 2592 +phrazer_bulldog MACH_PHRAZER_BULLDOG PHRAZER_BULLDOG 2593 +omap3_bulldog MACH_OMAP3_BULLDOG OMAP3_BULLDOG 2594 +pca101 MACH_PCA101 PCA101 2595 diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index aed05bc..f60a540 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -63,14 +63,15 @@ static void vfp_thread_flush(struct thread_info *thread) put_cpu(); } -static void vfp_thread_release(struct thread_info *thread) +static void vfp_thread_exit(struct thread_info *thread) { /* release case: Per-thread VFP cleanup. */ union vfp_state *vfp = &thread->vfpstate; - unsigned int cpu = thread->cpu; + unsigned int cpu = get_cpu(); if (last_VFP_context[cpu] == vfp) last_VFP_context[cpu] = NULL; + put_cpu(); } /* @@ -88,11 +89,13 @@ static void vfp_thread_release(struct thread_info *thread) * but may change at any time. * - we could be preempted if tree preempt rcu is enabled, so * it is unsafe to use thread->cpu. - * THREAD_NOTIFY_RELEASE: - * - the thread (v) will not be running on any CPU; it is a dead thread. - * - thread->cpu will be the last CPU the thread ran on, which may not - * be the current CPU. - * - we could be preempted if tree preempt rcu is enabled. + * THREAD_NOTIFY_EXIT + * - the thread (v) will be running on the local CPU, so + * v === current_thread_info() + * - thread->cpu is the local CPU number at the time it is accessed, + * but may change at any time. + * - we could be preempted if tree preempt rcu is enabled, so + * it is unsafe to use thread->cpu. */ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) { @@ -133,7 +136,7 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) if (cmd == THREAD_NOTIFY_FLUSH) vfp_thread_flush(thread); else - vfp_thread_release(thread); + vfp_thread_exit(thread); return NOTIFY_DONE; } |
