diff options
Diffstat (limited to 'arch/arm')
77 files changed, 485 insertions, 1159 deletions
diff --git a/arch/arm/mach-exynos4/include/mach/clkdev.h b/arch/arm/mach-exynos4/include/mach/clkdev.h deleted file mode 100644 index 7dffa83..0000000 --- a/arch/arm/mach-exynos4/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c index 1e83f8c..92937b4 100644 --- a/arch/arm/mach-exynos4/setup-sdhci.c +++ b/arch/arm/mach-exynos4/setup-sdhci.c @@ -10,16 +10,7 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ @@ -29,41 +20,3 @@ char *exynos4_hsmmc_clksrcs[4] = { [2] = "sclk_mmc", /* mmc_bus */ [3] = NULL, }; - -void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, - struct mmc_ios *ios, struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - /* don't need to alter anything according to card-type */ - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - - /* select base clock source to HCLK */ - - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - - /* - * clear async mode, enable conflict mask, rx feedback ctrl, SD - * clk hold and no use debounce count - */ - - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - /* Tx and Rx feedback clock delay control */ - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 2a2fa06..a9201ea 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -696,9 +696,9 @@ static void __init h1940_init(void) S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0); - tmp = (0x78 << S3C24XX_PLLCON_MDIVSHIFT) - | (0x02 << S3C24XX_PLLCON_PDIVSHIFT) - | (0x03 << S3C24XX_PLLCON_SDIVSHIFT); + tmp = (0x78 << S3C24XX_PLL_MDIV_SHIFT) + | (0x02 << S3C24XX_PLL_PDIV_SHIFT) + | (0x03 << S3C24XX_PLL_SDIV_SHIFT); writel(tmp, S3C2410_UPLLCON); gpio_request(S3C2410_GPC(0), "LCD power"); diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c index 196fb37..72b7c62 100644 --- a/arch/arm/mach-s3c2416/clock.c +++ b/arch/arm/mach-s3c2416/clock.c @@ -21,7 +21,6 @@ #include <plat/cpu.h> #include <plat/cpu-freq.h> -#include <plat/pll6553x.h> #include <plat/pll.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-s3c2416/setup-sdhci.c b/arch/arm/mach-s3c2416/setup-sdhci.c index ed34fad..cee5395 100644 --- a/arch/arm/mach-s3c2416/setup-sdhci.c +++ b/arch/arm/mach-s3c2416/setup-sdhci.c @@ -12,17 +12,7 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ @@ -32,30 +22,3 @@ char *s3c2416_hsmmc_clksrcs[4] = { [2] = "hsmmc-if", /* [3] = "48m", - note not successfully used yet */ }; - -void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - ctrl2 = __raw_readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - __raw_writel(ctrl2, r + S3C_SDHCI_CONTROL2); - __raw_writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 872e683..39c238d 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -25,13 +25,13 @@ #include <mach/regs-sys.h> #include <mach/regs-clock.h> -#include <mach/pll.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/cpu-freq.h> #include <plat/clock.h> #include <plat/clock-clksrc.h> +#include <plat/pll.h> /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call * ext_xtal_mux for want of an actual name from the manual. @@ -735,7 +735,8 @@ void __init_or_cpufreq s3c6400_setup_clocks(void) /* For now assume the mux always selects the crystal */ clk_ext_xtal_mux.parent = xtal_clk; - epll = s3c6400_get_epll(xtal); + epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0), + __raw_readl(S3C_EPLL_CON1)); mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c index 6c498f9..cefd7f6 100644 --- a/arch/arm/mach-s3c64xx/cpu.c +++ b/arch/arm/mach-s3c64xx/cpu.c @@ -33,8 +33,8 @@ #include <plat/devs.h> #include <plat/clock.h> -#include <mach/s3c6400.h> -#include <mach/s3c6410.h> +#include <plat/s3c6400.h> +#include <plat/s3c6410.h> /* table of supported CPUs */ diff --git a/arch/arm/mach-s3c64xx/include/mach/clkdev.h b/arch/arm/mach-s3c64xx/include/mach/clkdev.h deleted file mode 100644 index 7dffa83..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h deleted file mode 100644 index 5ef0bb6..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/pll.h +++ /dev/null @@ -1,45 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/pll.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX PLL code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C6400_PLL_MDIV_MASK ((1 << (25-16+1)) - 1) -#define S3C6400_PLL_PDIV_MASK ((1 << (13-8+1)) - 1) -#define S3C6400_PLL_SDIV_MASK ((1 << (2-0+1)) - 1) -#define S3C6400_PLL_MDIV_SHIFT (16) -#define S3C6400_PLL_PDIV_SHIFT (8) -#define S3C6400_PLL_SDIV_SHIFT (0) - -#include <asm/div64.h> -#include <plat/pll6553x.h> - -static inline unsigned long s3c6400_get_pll(unsigned long baseclk, - u32 pllcon) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK; - pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK; - sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} - -static inline unsigned long s3c6400_get_epll(unsigned long baseclk) -{ - return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0), - __raw_readl(S3C_EPLL_CON1)); -} diff --git a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h deleted file mode 100644 index b25bede..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h +++ /dev/null @@ -1,56 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64xx - pwm clock and timer support - */ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg >= S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index cb88643..d2a68d2 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -45,7 +45,7 @@ #include <plat/fb.h> #include <plat/regs-fb-v4.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 30afaa5..fb3d9cd 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -43,7 +43,6 @@ #include <mach/hardware.h> #include <mach/map.h> -#include <mach/s3c6410.h> #include <mach/regs-sys.h> #include <mach/regs-gpio.h> #include <mach/regs-modem.h> @@ -51,6 +50,7 @@ #include <mach/regs-gpio-memport.h> +#include <plat/s3c6410.h> #include <plat/regs-serial.h> #include <plat/regs-fb-v4.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index b3d93cc..61f4fde 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -37,7 +37,7 @@ #include <plat/fb.h> #include <plat/nand.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 8f34a3c1..5abb6d4 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -32,8 +32,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-modem.h> #include <mach/regs-srom.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/adc.h> #include <plat/cpu.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 01c6857..0f4316a 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -39,7 +39,7 @@ #include <plat/iic.h> #include <plat/fb.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 1f5abfa..1073d81 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -33,8 +33,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-modem.h> #include <mach/regs-srom.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/adc.h> #include <plat/cpu.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index 342e8df..30e906b 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -22,8 +22,8 @@ #include <mach/map.h> #include <mach/regs-gpio.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index 5796397..9a71c2b 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -22,8 +22,8 @@ #include <mach/map.h> #include <mach/regs-gpio.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index 3cca642..fc7cb03 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -31,7 +31,7 @@ #include <plat/regs-serial.h> -#include <mach/s3c6400.h> +#include <plat/s3c6400.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index d831c97..a817d62 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -63,7 +63,7 @@ #include <plat/fb.h> #include <plat/gpio-cfg.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 5e93fe3..7a3bc32 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -38,7 +38,7 @@ #include <plat/sdhci.h> #include <plat/iic-core.h> #include <plat/onenand-core.h> -#include <mach/s3c6400.h> +#include <plat/s3c6400.h> void __init s3c6400_map_io(void) { diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index 312aa6b..4117003 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -41,8 +41,8 @@ #include <plat/adc-core.h> #include <plat/iic-core.h> #include <plat/onenand-core.h> -#include <mach/s3c6400.h> -#include <mach/s3c6410.h> +#include <plat/s3c6400.h> +#include <plat/s3c6410.h> void __init s3c6410_map_io(void) { diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c index f344a22..c75a71b 100644 --- a/arch/arm/mach-s3c64xx/setup-sdhci.c +++ b/arch/arm/mach-s3c64xx/setup-sdhci.c @@ -12,17 +12,7 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ @@ -32,41 +22,3 @@ char *s3c64xx_hsmmc_clksrcs[4] = { [2] = "mmc_bus", /* [3] = "48m", - note not successfully used yet */ }; - -void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3); - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} - -void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); - - s3c6400_setup_sdhci_cfg_card(dev, r, ios, card); -} diff --git a/arch/arm/mach-s5p64x0/include/mach/clkdev.h b/arch/arm/mach-s5p64x0/include/mach/clkdev.h deleted file mode 100644 index 7dffa83..0000000 --- a/arch/arm/mach-s5p64x0/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h deleted file mode 100644 index 19fff8b7..0000000 --- a/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h +++ /dev/null @@ -1,68 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S5P64X0 - pwm clock and timer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return 0; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK 0 - -#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/clkdev.h b/arch/arm/mach-s5pc100/include/mach/clkdev.h deleted file mode 100644 index 7dffa83..0000000 --- a/arch/arm/mach-s5pc100/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h deleted file mode 100644 index b34d2f7..0000000 --- a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h +++ /dev/null @@ -1,56 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - pwm clock and timer support - * - * Based on mach-s3c6400/include/mach/pwm-clock.h - */ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg >= S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c index be25879..6418c6e 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci.c +++ b/arch/arm/mach-s5pc100/setup-sdhci.c @@ -11,17 +11,7 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ @@ -31,35 +21,3 @@ char *s5pc100_hsmmc_clksrcs[4] = { [2] = "sclk_mmc", /* mmc_bus */ /* [3] = "48m", - note not successfully used yet */ }; - - -void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - /* don't need to alter anything according to card-type */ - - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} diff --git a/arch/arm/mach-s5pv210/include/mach/clkdev.h b/arch/arm/mach-s5pv210/include/mach/clkdev.h deleted file mode 100644 index 7dffa83..0000000 --- a/arch/arm/mach-s5pv210/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h deleted file mode 100644 index f8a9f1b..0000000 --- a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * S5PV210 - pwm clock and timer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg == S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK - -#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c index a83b6c9..6b8ccc4 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci.c +++ b/arch/arm/mach-s5pv210/setup-sdhci.c @@ -10,17 +10,7 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ @@ -30,34 +20,3 @@ char *s5pv210_hsmmc_clksrcs[4] = { [2] = "sclk_mmc", /* mmc_bus */ /* [3] = NULL, - reserved */ }; - -void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - /* don't need to alter anything according to card-type */ - - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} diff --git a/arch/arm/plat-s3c24xx/include/mach/clkdev.h b/arch/arm/plat-s3c24xx/include/mach/clkdev.h deleted file mode 100644 index 7dffa83..0000000 --- a/arch/arm/plat-s3c24xx/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h b/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h deleted file mode 100644 index a087de2..0000000 --- a/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h +++ /dev/null @@ -1,55 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C24xx - pwm clock and timer support - */ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @cfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg == S3C2410_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << (1 + tcfg1); -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 0; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div) - 1; -} - -#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK diff --git a/arch/arm/plat-s3c24xx/include/plat/pll.h b/arch/arm/plat-s3c24xx/include/plat/pll.h deleted file mode 100644 index 005729a..0000000 --- a/arch/arm/plat-s3c24xx/include/plat/pll.h +++ /dev/null @@ -1,62 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C24xx - common pll registers and code - */ - -#define S3C24XX_PLLCON_MDIVSHIFT 12 -#define S3C24XX_PLLCON_PDIVSHIFT 4 -#define S3C24XX_PLLCON_SDIVSHIFT 0 -#define S3C24XX_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1) -#define S3C24XX_PLLCON_PDIVMASK ((1<<5)-1) -#define S3C24XX_PLLCON_SDIVMASK 3 - -#include <asm/div64.h> - -static inline unsigned int -s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = pllval >> S3C24XX_PLLCON_MDIVSHIFT; - pdiv = pllval >> S3C24XX_PLLCON_PDIVSHIFT; - sdiv = pllval >> S3C24XX_PLLCON_SDIVSHIFT; - - mdiv &= S3C24XX_PLLCON_MDIVMASK; - pdiv &= S3C24XX_PLLCON_PDIVMASK; - sdiv &= S3C24XX_PLLCON_SDIVMASK; - - fvco = (uint64_t)baseclk * (mdiv + 8); - do_div(fvco, (pdiv + 2) << sdiv); - - return (unsigned int)fvco; -} - -#define S3C2416_PLL_M_SHIFT (14) -#define S3C2416_PLL_P_SHIFT (5) -#define S3C2416_PLL_S_MASK (7) -#define S3C2416_PLL_M_MASK ((1 << 10) - 1) -#define S3C2416_PLL_P_MASK (63) - -static inline unsigned int -s3c2416_get_pll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int m, p, s; - uint64_t fvco; - - m = pllval >> S3C2416_PLL_M_SHIFT; - p = pllval >> S3C2416_PLL_P_SHIFT; - - s = pllval & S3C2416_PLL_S_MASK; - m &= S3C2416_PLL_M_MASK; - p &= S3C2416_PLL_P_MASK; - - fvco = (uint64_t)baseclk * m; - do_div(fvco, (p << s)); - - return (unsigned int)fvco; -} diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h deleted file mode 100644 index cc44e0e..0000000 --- a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h +++ /dev/null @@ -1,68 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-iis.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 IIS register definition -*/ - -#ifndef __ASM_ARCH_REGS_IIS_H -#define __ASM_ARCH_REGS_IIS_H - -#define S3C2410_IISCON (0x00) - -#define S3C2410_IISCON_LRINDEX (1<<8) -#define S3C2410_IISCON_TXFIFORDY (1<<7) -#define S3C2410_IISCON_RXFIFORDY (1<<6) -#define S3C2410_IISCON_TXDMAEN (1<<5) -#define S3C2410_IISCON_RXDMAEN (1<<4) -#define S3C2410_IISCON_TXIDLE (1<<3) -#define S3C2410_IISCON_RXIDLE (1<<2) -#define S3C2410_IISCON_PSCEN (1<<1) -#define S3C2410_IISCON_IISEN (1<<0) - -#define S3C2410_IISMOD (0x04) - -#define S3C2440_IISMOD_MPLL (1<<9) -#define S3C2410_IISMOD_SLAVE (1<<8) -#define S3C2410_IISMOD_NOXFER (0<<6) -#define S3C2410_IISMOD_RXMODE (1<<6) -#define S3C2410_IISMOD_TXMODE (2<<6) -#define S3C2410_IISMOD_TXRXMODE (3<<6) -#define S3C2410_IISMOD_LR_LLOW (0<<5) -#define S3C2410_IISMOD_LR_RLOW (1<<5) -#define S3C2410_IISMOD_IIS (0<<4) -#define S3C2410_IISMOD_MSB (1<<4) -#define S3C2410_IISMOD_8BIT (0<<3) -#define S3C2410_IISMOD_16BIT (1<<3) -#define S3C2410_IISMOD_BITMASK (1<<3) -#define S3C2410_IISMOD_256FS (0<<2) -#define S3C2410_IISMOD_384FS (1<<2) -#define S3C2410_IISMOD_16FS (0<<0) -#define S3C2410_IISMOD_32FS (1<<0) -#define S3C2410_IISMOD_48FS (2<<0) -#define S3C2410_IISMOD_FS_MASK (3<<0) - -#define S3C2410_IISPSR (0x08) -#define S3C2410_IISPSR_INTMASK (31<<5) -#define S3C2410_IISPSR_INTSHIFT (5) -#define S3C2410_IISPSR_EXTMASK (31<<0) -#define S3C2410_IISPSR_EXTSHFIT (0) - -#define S3C2410_IISFCON (0x0c) - -#define S3C2410_IISFCON_TXDMA (1<<15) -#define S3C2410_IISFCON_RXDMA (1<<14) -#define S3C2410_IISFCON_TXENABLE (1<<13) -#define S3C2410_IISFCON_RXENABLE (1<<12) -#define S3C2410_IISFCON_TXMASK (0x3f << 6) -#define S3C2410_IISFCON_TXSHIFT (6) -#define S3C2410_IISFCON_RXMASK (0x3f) -#define S3C2410_IISFCON_RXSHIFT (0) - -#define S3C2410_IISFIFO (0x10) -#endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h deleted file mode 100644 index 892e2f6..0000000 --- a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h +++ /dev/null @@ -1,81 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-spi.h - * - * Copyright (c) 2004 Fetron GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 SPI register definition -*/ - -#ifndef __ASM_ARCH_REGS_SPI_H -#define __ASM_ARCH_REGS_SPI_H - -#define S3C2410_SPI1 (0x20) -#define S3C2412_SPI1 (0x100) - -#define S3C2410_SPCON (0x00) - -#define S3C2412_SPCON_RXFIFO_RB2 (0<<14) -#define S3C2412_SPCON_RXFIFO_RB4 (1<<14) -#define S3C2412_SPCON_RXFIFO_RB12 (2<<14) -#define S3C2412_SPCON_RXFIFO_RB14 (3<<14) -#define S3C2412_SPCON_TXFIFO_RB2 (0<<12) -#define S3C2412_SPCON_TXFIFO_RB4 (1<<12) -#define S3C2412_SPCON_TXFIFO_RB12 (2<<12) -#define S3C2412_SPCON_TXFIFO_RB14 (3<<12) -#define S3C2412_SPCON_RXFIFO_RESET (1<<11) /* RxFIFO reset */ -#define S3C2412_SPCON_TXFIFO_RESET (1<<10) /* TxFIFO reset */ -#define S3C2412_SPCON_RXFIFO_EN (1<<9) /* RxFIFO Enable */ -#define S3C2412_SPCON_TXFIFO_EN (1<<8) /* TxFIFO Enable */ - -#define S3C2412_SPCON_DIRC_RX (1<<7) - -#define S3C2410_SPCON_SMOD_DMA (2<<5) /* DMA mode */ -#define S3C2410_SPCON_SMOD_INT (1<<5) /* interrupt mode */ -#define S3C2410_SPCON_SMOD_POLL (0<<5) /* polling mode */ -#define S3C2410_SPCON_ENSCK (1<<4) /* Enable SCK */ -#define S3C2410_SPCON_MSTR (1<<3) /* Master/Slave select - 0: slave, 1: master */ -#define S3C2410_SPCON_CPOL_HIGH (1<<2) /* Clock polarity select */ -#define S3C2410_SPCON_CPOL_LOW (0<<2) /* Clock polarity select */ - -#define S3C2410_SPCON_CPHA_FMTB (1<<1) /* Clock Phase Select */ -#define S3C2410_SPCON_CPHA_FMTA (0<<1) /* Clock Phase Select */ - -#define S3C2410_SPCON_TAGD (1<<0) /* Tx auto garbage data mode */ - - -#define S3C2410_SPSTA (0x04) - -#define S3C2412_SPSTA_RXFIFO_AE (1<<11) -#define S3C2412_SPSTA_TXFIFO_AE (1<<10) -#define S3C2412_SPSTA_RXFIFO_ERROR (1<<9) -#define S3C2412_SPSTA_TXFIFO_ERROR (1<<8) -#define S3C2412_SPSTA_RXFIFO_FIFO (1<<7) -#define S3C2412_SPSTA_RXFIFO_EMPTY (1<<6) -#define S3C2412_SPSTA_TXFIFO_NFULL (1<<5) -#define S3C2412_SPSTA_TXFIFO_EMPTY (1<<4) - -#define S3C2410_SPSTA_DCOL (1<<2) /* Data Collision Error */ -#define S3C2410_SPSTA_MULD (1<<1) /* Multi Master Error */ -#define S3C2410_SPSTA_READY (1<<0) /* Data Tx/Rx ready */ -#define S3C2412_SPSTA_READY_ORG (1<<3) - -#define S3C2410_SPPIN (0x08) - -#define S3C2410_SPPIN_ENMUL (1<<2) /* Multi Master Error detect */ -#define S3C2410_SPPIN_RESERVED (1<<1) -#define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */ - -#define S3C2410_SPPRE (0x0C) -#define S3C2410_SPTDAT (0x10) -#define S3C2410_SPRDAT (0x14) - -#define S3C2412_TXFIFO (0x18) -#define S3C2412_RXFIFO (0x18) -#define S3C2412_SPFIC (0x24) - - -#endif /* __ASM_ARCH_REGS_SPI_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h b/arch/arm/plat-samsung/include/plat/audio-simtec.h index de5e88f..5345364 100644 --- a/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h +++ b/arch/arm/plat-samsung/include/plat/audio-simtec.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c24xx/include/plat/audio-simtec.h +/* arch/arm/plat-samsung/include/plat/audio-simtec.h * * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ diff --git a/arch/arm/plat-s5p/include/plat/camport.h b/arch/arm/plat-samsung/include/plat/camport.h index 71688c8..a5708bf 100644 --- a/arch/arm/plat-s5p/include/plat/camport.h +++ b/arch/arm/plat-samsung/include/plat/camport.h @@ -8,8 +8,8 @@ * published by the Free Software Foundation. */ -#ifndef PLAT_S5P_CAMPORT_H_ -#define PLAT_S5P_CAMPORT_H_ __FILE__ +#ifndef __PLAT_SAMSUNG_CAMPORT_H_ +#define __PLAT_SAMSUNG_CAMPORT_H_ __FILE__ enum s5p_camport_id { S5P_CAMPORT_A, @@ -25,4 +25,4 @@ enum s5p_camport_id { int s5pv210_fimc_setup_gpio(enum s5p_camport_id id); int exynos4_fimc_setup_gpio(enum s5p_camport_id id); -#endif +#endif /* __PLAT_SAMSUNG_CAMPORT_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/common-smdk.h b/arch/arm/plat-samsung/include/plat/common-smdk.h index 58d9094..ba028f1 100644 --- a/arch/arm/plat-s3c24xx/include/plat/common-smdk.h +++ b/arch/arm/plat-samsung/include/plat/common-smdk.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h +/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index d623235..dac4760 100644 --- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c/include/plat/cpu-freq.h +/* arch/arm/plat-samsung/include/plat/cpu-freq-core.h * * Copyright (c) 2006-2009 Simtec Electronics * http://armlinux.simtec.co.uk/ @@ -195,7 +195,8 @@ struct s3c_cpufreq_info { extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info); -extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no); +extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, + unsigned int plls_no); /* exports and utilities for debugfs */ extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void); diff --git a/arch/arm/plat-s5p/include/plat/ehci.h b/arch/arm/plat-samsung/include/plat/ehci.h index 6ae6810..5f28cae 100644 --- a/arch/arm/plat-s5p/include/plat/ehci.h +++ b/arch/arm/plat-samsung/include/plat/ehci.h @@ -8,8 +8,8 @@ * option) any later version. */ -#ifndef __PLAT_S5P_EHCI_H -#define __PLAT_S5P_EHCI_H +#ifndef __PLAT_SAMSUNG_EHCI_H +#define __PLAT_SAMSUNG_EHCI_H __FILE__ struct s5p_ehci_platdata { int (*phy_init)(struct platform_device *pdev, int type); @@ -18,4 +18,4 @@ struct s5p_ehci_platdata { extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd); -#endif /* __PLAT_S5P_EHCI_H */ +#endif /* __PLAT_SAMSUNG_EHCI_H */ diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-samsung/include/plat/exynos4.h index f680a14..20d73bf 100644 --- a/arch/arm/plat-s5p/include/plat/exynos4.h +++ b/arch/arm/plat-samsung/include/plat/exynos4.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/exynos4.h +/* linux/arch/arm/plat-samsung/include/plat/exynos4.h * * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-samsung/include/plat/fiq.h index 8521b83..535d06a 100644 --- a/arch/arm/plat-s3c24xx/include/plat/fiq.h +++ b/arch/arm/plat-samsung/include/plat/fiq.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/fiq.h +/* linux/arch/arm/plat-samsung/include/plat/fiq.h * * Copyright (c) 2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-samsung/include/plat/irq.h index ec087d6..e21a89b 100644 --- a/arch/arm/plat-s3c24xx/include/plat/irq.h +++ b/arch/arm/plat-samsung/include/plat/irq.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/irq.h +/* linux/arch/arm/plat-samsung/include/plat/irq.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -25,9 +25,9 @@ extern struct irq_chip s3c_irq_level_chip; extern struct irq_chip s3c_irq_chip; -static inline void -s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, - int subcheck) +static inline void s3c_irqsub_mask(unsigned int irqno, + unsigned int parentbit, + int subcheck) { unsigned long mask; unsigned long submask; @@ -39,17 +39,16 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, /* check to see if we need to mask the parent IRQ */ - if ((submask & subcheck) == subcheck) { + if ((submask & subcheck) == subcheck) __raw_writel(mask | parentbit, S3C2410_INTMSK); - } /* write back masks */ __raw_writel(submask, S3C2410_INTSUBMSK); } -static inline void -s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) +static inline void s3c_irqsub_unmask(unsigned int irqno, + unsigned int parentbit) { unsigned long mask; unsigned long submask; @@ -66,8 +65,9 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) } -static inline void -s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group) +static inline void s3c_irqsub_maskack(unsigned int irqno, + unsigned int parentmask, + unsigned int group) { unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); @@ -86,8 +86,9 @@ s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int gro } } -static inline void -s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group) +static inline void s3c_irqsub_ack(unsigned int irqno, + unsigned int parentmask, + unsigned int group) { unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h index ba9121c..94ecf8c 100644 --- a/arch/arm/plat-s5p/include/plat/irqs.h +++ b/arch/arm/plat-samsung/include/plat/irqs.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/irqs.h +/* linux/arch/arm/plat-samsung/include/plat/irqs.h * * Copyright (c) 2009 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -10,8 +10,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_S5P_IRQS_H -#define __ASM_PLAT_S5P_IRQS_H __FILE__ +#ifndef __PLAT_SAMSUNG_IRQS_H +#define __PLAT_SAMSUNG_IRQS_H __FILE__ /* we keep the first set of CPU IRQs out of the range of * the ISA space, so that the PC104 has them to itself @@ -112,4 +112,4 @@ #define S5P_IRQ_TYPE_EDGE_RISING (0x03) #define S5P_IRQ_TYPE_EDGE_BOTH (0x04) -#endif /* __ASM_PLAT_S5P_IRQS_H */ +#endif /* __PLAT_SAMSUNG_IRQS_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-samsung/include/plat/mci.h index 2ac2b21..c42d317 100644 --- a/arch/arm/plat-s3c24xx/include/plat/mci.h +++ b/arch/arm/plat-samsung/include/plat/mci.h @@ -27,11 +27,11 @@ * to a non-zero value, otherwise the default of 3.2-3.4V is used. */ struct s3c24xx_mci_pdata { - unsigned int no_wprotect : 1; - unsigned int no_detect : 1; - unsigned int wprotect_invert : 1; - unsigned int detect_invert : 1; /* set => detect active high. */ - unsigned int use_dma : 1; + unsigned int no_wprotect:1; + unsigned int no_detect:1; + unsigned int wprotect_invert:1; + unsigned int detect_invert:1; /* set => detect active high */ + unsigned int use_dma:1; unsigned int gpio_detect; unsigned int gpio_wprotect; diff --git a/arch/arm/plat-s5p/include/plat/mfc.h b/arch/arm/plat-samsung/include/plat/mfc.h index 6697f8c..ac13227 100644 --- a/arch/arm/plat-s5p/include/plat/mfc.h +++ b/arch/arm/plat-samsung/include/plat/mfc.h @@ -7,8 +7,8 @@ * option) any later version. */ -#ifndef __PLAT_S5P_MFC_H -#define __PLAT_S5P_MFC_H +#ifndef __PLAT_SAMSUNG_MFC_H +#define __PLAT_SAMSUNG_MFC_H __FILE__ /** * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver @@ -24,4 +24,4 @@ void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, phys_addr_t lbase, unsigned int lsize); -#endif /* __PLAT_S5P_MFC_H */ +#endif /* __PLAT_SAMSUNG_MFC_H */ diff --git a/arch/arm/plat-s5p/include/plat/mipi_csis.h b/arch/arm/plat-samsung/include/plat/mipi_csis.h index 9bd254c..c45b1e8 100644 --- a/arch/arm/plat-s5p/include/plat/mipi_csis.h +++ b/arch/arm/plat-samsung/include/plat/mipi_csis.h @@ -8,8 +8,8 @@ * published by the Free Software Foundation. */ -#ifndef PLAT_S5P_MIPI_CSIS_H_ -#define PLAT_S5P_MIPI_CSIS_H_ __FILE__ +#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_ +#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__ struct platform_device; @@ -40,4 +40,4 @@ struct s5p_platform_mipi_csis { */ int s5p_csis_phy_enable(struct platform_device *pdev, bool on); -#endif /* PLAT_S5P_MIPI_CSIS_H_ */ +#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */ diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-samsung/include/plat/pll.h index 002ec9f..357af7c 100644 --- a/arch/arm/plat-s5p/include/plat/pll.h +++ b/arch/arm/plat-samsung/include/plat/pll.h @@ -1,11 +1,14 @@ -/* arch/arm/plat-s5p/include/plat/pll.h +/* linux/arch/arm/plat-samsung/include/plat/pll.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * - * S5P PLL code + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ * - * Based on arch/arm/plat-s3c64xx/include/plat/pll.h + * Samsung PLL codes * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,6 +17,111 @@ #include <asm/div64.h> +#define S3C24XX_PLL_MDIV_MASK (0xFF) +#define S3C24XX_PLL_PDIV_MASK (0x1F) +#define S3C24XX_PLL_SDIV_MASK (0x3) +#define S3C24XX_PLL_MDIV_SHIFT (12) +#define S3C24XX_PLL_PDIV_SHIFT (4) +#define S3C24XX_PLL_SDIV_SHIFT (0) + +static inline unsigned int s3c24xx_get_pll(unsigned int pllval, + unsigned int baseclk) +{ + unsigned int mdiv, pdiv, sdiv; + uint64_t fvco; + + mdiv = (pllval >> S3C24XX_PLL_MDIV_SHIFT) & S3C24XX_PLL_MDIV_MASK; + pdiv = (pllval >> S3C24XX_PLL_PDIV_SHIFT) & S3C24XX_PLL_PDIV_MASK; + sdiv = (pllval >> S3C24XX_PLL_SDIV_SHIFT) & S3C24XX_PLL_SDIV_MASK; + + fvco = (uint64_t)baseclk * (mdiv + 8); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned int)fvco; +} + +#define S3C2416_PLL_MDIV_MASK (0x3FF) +#define S3C2416_PLL_PDIV_MASK (0x3F) +#define S3C2416_PLL_SDIV_MASK (0x7) +#define S3C2416_PLL_MDIV_SHIFT (14) +#define S3C2416_PLL_PDIV_SHIFT (5) +#define S3C2416_PLL_SDIV_SHIFT (0) + +static inline unsigned int s3c2416_get_pll(unsigned int pllval, + unsigned int baseclk) +{ + unsigned int mdiv, pdiv, sdiv; + uint64_t fvco; + + mdiv = (pllval >> S3C2416_PLL_MDIV_SHIFT) & S3C2416_PLL_MDIV_MASK; + pdiv = (pllval >> S3C2416_PLL_PDIV_SHIFT) & S3C2416_PLL_PDIV_MASK; + sdiv = (pllval >> S3C2416_PLL_SDIV_SHIFT) & S3C2416_PLL_SDIV_MASK; + + fvco = (uint64_t)baseclk * mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned int)fvco; +} + +#define S3C6400_PLL_MDIV_MASK (0x3FF) +#define S3C6400_PLL_PDIV_MASK (0x3F) +#define S3C6400_PLL_SDIV_MASK (0x7) +#define S3C6400_PLL_MDIV_SHIFT (16) +#define S3C6400_PLL_PDIV_SHIFT (8) +#define S3C6400_PLL_SDIV_SHIFT (0) + +static inline unsigned long s3c6400_get_pll(unsigned long baseclk, + u32 pllcon) +{ + u32 mdiv, pdiv, sdiv; + u64 fvco = baseclk; + + mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK; + pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK; + sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +#define PLL6553X_MDIV_MASK (0x7F) +#define PLL6553X_PDIV_MASK (0x1F) +#define PLL6553X_SDIV_MASK (0x3) +#define PLL6553X_KDIV_MASK (0xFFFF) +#define PLL6553X_MDIV_SHIFT (16) +#define PLL6553X_PDIV_SHIFT (8) +#define PLL6553X_SDIV_SHIFT (0) + +static inline unsigned long s3c_get_pll6553x(unsigned long baseclk, + u32 pll_con0, u32 pll_con1) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll_con0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK; + pdiv = (pll_con0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK; + sdiv = (pll_con0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK; + kdiv = pll_con1 & PLL6553X_KDIV_MASK; + + /* + * We need to multiple baseclk by mdiv (the integer part) and kdiv + * which is in 2^16ths, so shift mdiv up (does not overflow) and + * add kdiv before multiplying. The use of tmp is to avoid any + * overflows before shifting bac down into result when multipling + * by the mdiv and kdiv pair. + */ + + tmp = baseclk; + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} + #define PLL35XX_MDIV_MASK (0x3FF) #define PLL35XX_PDIV_MASK (0x3F) #define PLL35XX_SDIV_MASK (0x7) @@ -132,6 +240,7 @@ static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK; pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK; sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; + kdiv = pll_con1 & PLL46XX_KDIV_MASK; if (pll_type == pll_4650c) kdiv = pll_con1 & PLL4650C_KDIV_MASK; @@ -175,7 +284,8 @@ static inline unsigned long s5p_get_pll90xx(unsigned long baseclk, sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK; kdiv = pll_conk & PLL90XX_KDIV_MASK; - /* We need to multiple baseclk by mdiv (the integer part) and kdiv + /* + * We need to multiple baseclk by mdiv (the integer part) and kdiv * which is in 2^16ths, so shift mdiv up (does not overflow) and * add kdiv before multiplying. The use of tmp is to avoid any * overflows before shifting bac down into result when multipling diff --git a/arch/arm/plat-samsung/include/plat/pll6553x.h b/arch/arm/plat-samsung/include/plat/pll6553x.h deleted file mode 100644 index b8b7e1d..0000000 --- a/arch/arm/plat-samsung/include/plat/pll6553x.h +++ /dev/null @@ -1,51 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/pll6553x.h - * partially from arch/arm/mach-s3c64xx/include/mach/pll.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Samsung PLL6553x PLL code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* S3C6400 and compatible (S3C2416, etc.) EPLL code */ - -#define PLL6553X_MDIV_MASK ((1 << (23-16)) - 1) -#define PLL6553X_PDIV_MASK ((1 << (13-8)) - 1) -#define PLL6553X_SDIV_MASK ((1 << (2-0)) - 1) -#define PLL6553X_MDIV_SHIFT (16) -#define PLL6553X_PDIV_SHIFT (8) -#define PLL6553X_SDIV_SHIFT (0) -#define PLL6553X_KDIV_MASK (0xffff) - -static inline unsigned long s3c_get_pll6553x(unsigned long baseclk, - u32 pll0, u32 pll1) -{ - unsigned long result; - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK; - pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK; - sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK; - kdiv = pll1 & PLL6553X_KDIV_MASK; - - /* We need to multiple baseclk by mdiv (the integer part) and kdiv - * which is in 2^16ths, so shift mdiv up (does not overflow) and - * add kdiv before multiplying. The use of tmp is to avoid any - * overflows before shifting bac down into result when multipling - * by the mdiv and kdiv pair. - */ - - tmp = baseclk; - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - - return result; -} diff --git a/arch/arm/mach-exynos4/include/mach/pwm-clock.h b/arch/arm/plat-samsung/include/plat/pwm-clock.h index 8e12090..bf6a60e 100644 --- a/arch/arm/mach-exynos4/include/mach/pwm-clock.h +++ b/arch/arm/plat-samsung/include/plat/pwm-clock.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-exynos4/include/mach/pwm-clock.h +/* linux/arch/arm/plat-samsung/include/plat/pwm-clock.h * * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -8,17 +8,15 @@ * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * EXYNOS4 - pwm clock and timer support + * SAMSUNG - pwm clock and timer support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ +#ifndef __ASM_PLAT_PWM_CLOCK_H +#define __ASM_PLAT_PWM_CLOCK_H __FILE__ /** * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk @@ -29,7 +27,14 @@ */ static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) { - return tcfg == S3C64XX_TCFG1_MUX_TCLK; + if (soc_is_s3c24xx()) + return tcfg == S3C2410_TCFG1_MUX_TCLK; + else if (soc_is_s3c64xx() || soc_is_s5pc100()) + return tcfg >= S3C64XX_TCFG1_MUX_TCLK; + else if (soc_is_s5p6440() || soc_is_s5p6450()) + return 0; + else + return tcfg == S3C64XX_TCFG1_MUX_TCLK; } /** @@ -41,7 +46,10 @@ static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) */ static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) { - return 1 << tcfg1; + if (soc_is_s3c24xx()) + return 1 << (tcfg1 + 1); + else + return 1 << tcfg1; } /** @@ -51,7 +59,10 @@ static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) */ static inline unsigned int pwm_tdiv_has_div1(void) { - return 1; + if (soc_is_s3c24xx()) + return 0; + else + return 1; } /** @@ -62,9 +73,9 @@ static inline unsigned int pwm_tdiv_has_div1(void) */ static inline unsigned long pwm_tdiv_div_bits(unsigned int div) { - return ilog2(div); + if (soc_is_s3c24xx()) + return ilog2(div) - 1; + else + return ilog2(div); } - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK - -#endif /* __ASM_ARCH_PWMCLK_H */ +#endif /* __ASM_PLAT_PWM_CLOCK_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-samsung/include/plat/regs-dma.h index 1b0f4c3..178bccb 100644 --- a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h +++ b/arch/arm/plat-samsung/include/plat/regs-dma.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/dma.h +/* arch/arm/plat-samsung/include/plat/regs-dma.h * * Copyright (C) 2003-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -10,7 +10,8 @@ * published by the Free Software Foundation. */ -/* DMA Register definitions */ +#ifndef __ASM_PLAT_REGS_DMA_H +#define __ASM_PLAT_REGS_DMA_H __FILE__ #define S3C2410_DMA_DISRC (0x00) #define S3C2410_DMA_DISRCC (0x04) @@ -24,74 +25,75 @@ #define S3C2412_DMA_DMAREQSEL (0x24) #define S3C2443_DMA_DMAREQSEL (0x24) -#define S3C2410_DISRCC_INC (1<<0) -#define S3C2410_DISRCC_APB (1<<1) +#define S3C2410_DISRCC_INC (1 << 0) +#define S3C2410_DISRCC_APB (1 << 1) -#define S3C2410_DMASKTRIG_STOP (1<<2) -#define S3C2410_DMASKTRIG_ON (1<<1) -#define S3C2410_DMASKTRIG_SWTRIG (1<<0) +#define S3C2410_DMASKTRIG_STOP (1 << 2) +#define S3C2410_DMASKTRIG_ON (1 << 1) +#define S3C2410_DMASKTRIG_SWTRIG (1 << 0) -#define S3C2410_DCON_DEMAND (0<<31) -#define S3C2410_DCON_HANDSHAKE (1<<31) -#define S3C2410_DCON_SYNC_PCLK (0<<30) -#define S3C2410_DCON_SYNC_HCLK (1<<30) +#define S3C2410_DCON_DEMAND (0 << 31) +#define S3C2410_DCON_HANDSHAKE (1 << 31) +#define S3C2410_DCON_SYNC_PCLK (0 << 30) +#define S3C2410_DCON_SYNC_HCLK (1 << 30) -#define S3C2410_DCON_INTREQ (1<<29) +#define S3C2410_DCON_INTREQ (1 << 29) -#define S3C2410_DCON_CH0_XDREQ0 (0<<24) -#define S3C2410_DCON_CH0_UART0 (1<<24) -#define S3C2410_DCON_CH0_SDI (2<<24) -#define S3C2410_DCON_CH0_TIMER (3<<24) -#define S3C2410_DCON_CH0_USBEP1 (4<<24) +#define S3C2410_DCON_CH0_XDREQ0 (0 << 24) +#define S3C2410_DCON_CH0_UART0 (1 << 24) +#define S3C2410_DCON_CH0_SDI (2 << 24) +#define S3C2410_DCON_CH0_TIMER (3 << 24) +#define S3C2410_DCON_CH0_USBEP1 (4 << 24) -#define S3C2410_DCON_CH1_XDREQ1 (0<<24) -#define S3C2410_DCON_CH1_UART1 (1<<24) -#define S3C2410_DCON_CH1_I2SSDI (2<<24) -#define S3C2410_DCON_CH1_SPI (3<<24) -#define S3C2410_DCON_CH1_USBEP2 (4<<24) +#define S3C2410_DCON_CH1_XDREQ1 (0 << 24) +#define S3C2410_DCON_CH1_UART1 (1 << 24) +#define S3C2410_DCON_CH1_I2SSDI (2 << 24) +#define S3C2410_DCON_CH1_SPI (3 << 24) +#define S3C2410_DCON_CH1_USBEP2 (4 << 24) -#define S3C2410_DCON_CH2_I2SSDO (0<<24) -#define S3C2410_DCON_CH2_I2SSDI (1<<24) -#define S3C2410_DCON_CH2_SDI (2<<24) -#define S3C2410_DCON_CH2_TIMER (3<<24) -#define S3C2410_DCON_CH2_USBEP3 (4<<24) +#define S3C2410_DCON_CH2_I2SSDO (0 << 24) +#define S3C2410_DCON_CH2_I2SSDI (1 << 24) +#define S3C2410_DCON_CH2_SDI (2 << 24) +#define S3C2410_DCON_CH2_TIMER (3 << 24) +#define S3C2410_DCON_CH2_USBEP3 (4 << 24) -#define S3C2410_DCON_CH3_UART2 (0<<24) -#define S3C2410_DCON_CH3_SDI (1<<24) -#define S3C2410_DCON_CH3_SPI (2<<24) -#define S3C2410_DCON_CH3_TIMER (3<<24) -#define S3C2410_DCON_CH3_USBEP4 (4<<24) +#define S3C2410_DCON_CH3_UART2 (0 << 24) +#define S3C2410_DCON_CH3_SDI (1 << 24) +#define S3C2410_DCON_CH3_SPI (2 << 24) +#define S3C2410_DCON_CH3_TIMER (3 << 24) +#define S3C2410_DCON_CH3_USBEP4 (4 << 24) #define S3C2410_DCON_SRCSHIFT (24) -#define S3C2410_DCON_SRCMASK (7<<24) +#define S3C2410_DCON_SRCMASK (7 << 24) -#define S3C2410_DCON_BYTE (0<<20) -#define S3C2410_DCON_HALFWORD (1<<20) -#define S3C2410_DCON_WORD (2<<20) +#define S3C2410_DCON_BYTE (0 << 20) +#define S3C2410_DCON_HALFWORD (1 << 20) +#define S3C2410_DCON_WORD (2 << 20) -#define S3C2410_DCON_AUTORELOAD (0<<22) -#define S3C2410_DCON_NORELOAD (1<<22) -#define S3C2410_DCON_HWTRIG (1<<23) +#define S3C2410_DCON_AUTORELOAD (0 << 22) +#define S3C2410_DCON_NORELOAD (1 << 22) +#define S3C2410_DCON_HWTRIG (1 << 23) #ifdef CONFIG_CPU_S3C2440 -#define S3C2440_DIDSTC_CHKINT (1<<2) -#define S3C2440_DCON_CH0_I2SSDO (5<<24) -#define S3C2440_DCON_CH0_PCMIN (6<<24) +#define S3C2440_DIDSTC_CHKINT (1 << 2) -#define S3C2440_DCON_CH1_PCMOUT (5<<24) -#define S3C2440_DCON_CH1_SDI (6<<24) +#define S3C2440_DCON_CH0_I2SSDO (5 << 24) +#define S3C2440_DCON_CH0_PCMIN (6 << 24) -#define S3C2440_DCON_CH2_PCMIN (5<<24) -#define S3C2440_DCON_CH2_MICIN (6<<24) +#define S3C2440_DCON_CH1_PCMOUT (5 << 24) +#define S3C2440_DCON_CH1_SDI (6 << 24) -#define S3C2440_DCON_CH3_MICIN (5<<24) -#define S3C2440_DCON_CH3_PCMOUT (6<<24) -#endif +#define S3C2440_DCON_CH2_PCMIN (5 << 24) +#define S3C2440_DCON_CH2_MICIN (6 << 24) + +#define S3C2440_DCON_CH3_MICIN (5 << 24) +#define S3C2440_DCON_CH3_PCMOUT (6 << 24) +#endif /* CONFIG_CPU_S3C2440 */ #ifdef CONFIG_CPU_S3C2412 -#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1) +#define S3C2412_DMAREQSEL_SRC(x) ((x) << 1) #define S3C2412_DMAREQSEL_HW (1) @@ -115,10 +117,11 @@ #define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22) #define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23) #define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24) +#endif /* CONFIG_CPU_S3C2412 */ -#endif +#ifdef CONFIG_CPU_S3C2443 -#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1) +#define S3C2443_DMAREQSEL_SRC(x) ((x) << 1) #define S3C2443_DMAREQSEL_HW (1) @@ -141,5 +144,8 @@ #define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25) #define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26) #define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27) -#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28) +#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28) #define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29) +#endif /* CONFIG_CPU_S3C2443 */ + +#endif /* __ASM_PLAT_REGS_DMA_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-iis.h b/arch/arm/plat-samsung/include/plat/regs-iis.h new file mode 100644 index 0000000..a18d35e --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-iis.h @@ -0,0 +1,70 @@ +/* arch/arm/plat-samsung/include/plat/regs-iis.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 IIS register definition +*/ + +#ifndef __ASM_ARCH_REGS_IIS_H +#define __ASM_ARCH_REGS_IIS_H + +#define S3C2410_IISCON (0x00) + +#define S3C2410_IISCON_LRINDEX (1 << 8) +#define S3C2410_IISCON_TXFIFORDY (1 << 7) +#define S3C2410_IISCON_RXFIFORDY (1 << 6) +#define S3C2410_IISCON_TXDMAEN (1 << 5) +#define S3C2410_IISCON_RXDMAEN (1 << 4) +#define S3C2410_IISCON_TXIDLE (1 << 3) +#define S3C2410_IISCON_RXIDLE (1 << 2) +#define S3C2410_IISCON_PSCEN (1 << 1) +#define S3C2410_IISCON_IISEN (1 << 0) + +#define S3C2410_IISMOD (0x04) + +#define S3C2440_IISMOD_MPLL (1 << 9) +#define S3C2410_IISMOD_SLAVE (1 << 8) +#define S3C2410_IISMOD_NOXFER (0 << 6) +#define S3C2410_IISMOD_RXMODE (1 << 6) +#define S3C2410_IISMOD_TXMODE (2 << 6) +#define S3C2410_IISMOD_TXRXMODE (3 << 6) +#define S3C2410_IISMOD_LR_LLOW (0 << 5) +#define S3C2410_IISMOD_LR_RLOW (1 << 5) +#define S3C2410_IISMOD_IIS (0 << 4) +#define S3C2410_IISMOD_MSB (1 << 4) +#define S3C2410_IISMOD_8BIT (0 << 3) +#define S3C2410_IISMOD_16BIT (1 << 3) +#define S3C2410_IISMOD_BITMASK (1 << 3) +#define S3C2410_IISMOD_256FS (0 << 2) +#define S3C2410_IISMOD_384FS (1 << 2) +#define S3C2410_IISMOD_16FS (0 << 0) +#define S3C2410_IISMOD_32FS (1 << 0) +#define S3C2410_IISMOD_48FS (2 << 0) +#define S3C2410_IISMOD_FS_MASK (3 << 0) + +#define S3C2410_IISPSR (0x08) + +#define S3C2410_IISPSR_INTMASK (31 << 5) +#define S3C2410_IISPSR_INTSHIFT (5) +#define S3C2410_IISPSR_EXTMASK (31 << 0) +#define S3C2410_IISPSR_EXTSHFIT (0) + +#define S3C2410_IISFCON (0x0c) + +#define S3C2410_IISFCON_TXDMA (1 << 15) +#define S3C2410_IISFCON_RXDMA (1 << 14) +#define S3C2410_IISFCON_TXENABLE (1 << 13) +#define S3C2410_IISFCON_RXENABLE (1 << 12) +#define S3C2410_IISFCON_TXMASK (0x3f << 6) +#define S3C2410_IISFCON_TXSHIFT (6) +#define S3C2410_IISFCON_RXMASK (0x3f) +#define S3C2410_IISFCON_RXSHIFT (0) + +#define S3C2410_IISFIFO (0x10) + +#endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-spi.h b/arch/arm/plat-samsung/include/plat/regs-spi.h new file mode 100644 index 0000000..552fe7c --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-spi.h @@ -0,0 +1,48 @@ +/* arch/arm/plat-samsung/include/plat/regs-spi.h + * + * Copyright (c) 2004 Fetron GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 SPI register definition +*/ + +#ifndef __ASM_ARCH_REGS_SPI_H +#define __ASM_ARCH_REGS_SPI_H + +#define S3C2410_SPI1 (0x20) +#define S3C2412_SPI1 (0x100) + +#define S3C2410_SPCON (0x00) + +#define S3C2410_SPCON_SMOD_DMA (2 << 5) /* DMA mode */ +#define S3C2410_SPCON_SMOD_INT (1 << 5) /* interrupt mode */ +#define S3C2410_SPCON_SMOD_POLL (0 << 5) /* polling mode */ +#define S3C2410_SPCON_ENSCK (1 << 4) /* Enable SCK */ +#define S3C2410_SPCON_MSTR (1 << 3) /* Master:1, Slave:0 select */ +#define S3C2410_SPCON_CPOL_HIGH (1 << 2) /* Clock polarity select */ +#define S3C2410_SPCON_CPOL_LOW (0 << 2) /* Clock polarity select */ + +#define S3C2410_SPCON_CPHA_FMTB (1 << 1) /* Clock Phase Select */ +#define S3C2410_SPCON_CPHA_FMTA (0 << 1) /* Clock Phase Select */ + +#define S3C2410_SPSTA (0x04) + +#define S3C2410_SPSTA_DCOL (1 << 2) /* Data Collision Error */ +#define S3C2410_SPSTA_MULD (1 << 1) /* Multi Master Error */ +#define S3C2410_SPSTA_READY (1 << 0) /* Data Tx/Rx ready */ +#define S3C2412_SPSTA_READY_ORG (1 << 3) + +#define S3C2410_SPPIN (0x08) + +#define S3C2410_SPPIN_ENMUL (1 << 2) /* Multi Master Error detect */ +#define S3C2410_SPPIN_RESERVED (1 << 1) +#define S3C2410_SPPIN_KEEP (1 << 0) /* Master Out keep */ + +#define S3C2410_SPPRE (0x0C) +#define S3C2410_SPTDAT (0x10) +#define S3C2410_SPRDAT (0x14) + +#endif /* __ASM_ARCH_REGS_SPI_H */ diff --git a/arch/arm/plat-s5p/include/plat/regs-srom.h b/arch/arm/plat-samsung/include/plat/regs-srom.h index f121ab5..9b6729c 100644 --- a/arch/arm/plat-s5p/include/plat/regs-srom.h +++ b/arch/arm/plat-samsung/include/plat/regs-srom.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/regs-srom.h +/* linux/arch/arm/plat-samsung/include/plat/regs-srom.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -10,8 +10,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_S5P_REGS_SROM_H -#define __ASM_PLAT_S5P_REGS_SROM_H __FILE__ +#ifndef __PLAT_SAMSUNG_REGS_SROM_H +#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__ #include <mach/map.h> @@ -51,4 +51,4 @@ #define S5P_SROM_BCX__TCOS__SHIFT 24 #define S5P_SROM_BCX__TACS__SHIFT 28 -#endif /* __ASM_PLAT_S5P_REGS_SROM_H */ +#endif /* __PLAT_SAMSUNG_REGS_SROM_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-udc.h b/arch/arm/plat-samsung/include/plat/regs-udc.h index f0dd4a4..4003d3d 100644 --- a/arch/arm/plat-s3c24xx/include/plat/regs-udc.h +++ b/arch/arm/plat-samsung/include/plat/regs-udc.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-udc.h +/* arch/arm/plat-samsung/include/plat/regs-udc.h * * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at> * @@ -75,79 +75,77 @@ #define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198) #define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c) -#define S3C2410_UDC_FUNCADDR_UPDATE (1<<7) +#define S3C2410_UDC_FUNCADDR_UPDATE (1 << 7) -#define S3C2410_UDC_PWR_ISOUP (1<<7) // R/W -#define S3C2410_UDC_PWR_RESET (1<<3) // R -#define S3C2410_UDC_PWR_RESUME (1<<2) // R/W -#define S3C2410_UDC_PWR_SUSPEND (1<<1) // R -#define S3C2410_UDC_PWR_ENSUSPEND (1<<0) // R/W +#define S3C2410_UDC_PWR_ISOUP (1 << 7) /* R/W */ +#define S3C2410_UDC_PWR_RESET (1 << 3) /* R */ +#define S3C2410_UDC_PWR_RESUME (1 << 2) /* R/W */ +#define S3C2410_UDC_PWR_SUSPEND (1 << 1) /* R */ +#define S3C2410_UDC_PWR_ENSUSPEND (1 << 0) /* R/W */ -#define S3C2410_UDC_PWR_DEFAULT 0x00 +#define S3C2410_UDC_PWR_DEFAULT (0x00) -#define S3C2410_UDC_INT_EP4 (1<<4) // R/W (clear only) -#define S3C2410_UDC_INT_EP3 (1<<3) // R/W (clear only) -#define S3C2410_UDC_INT_EP2 (1<<2) // R/W (clear only) -#define S3C2410_UDC_INT_EP1 (1<<1) // R/W (clear only) -#define S3C2410_UDC_INT_EP0 (1<<0) // R/W (clear only) +#define S3C2410_UDC_INT_EP4 (1 << 4) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP3 (1 << 3) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP2 (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP1 (1 << 1) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP0 (1 << 0) /* R/W (clear only) */ -#define S3C2410_UDC_USBINT_RESET (1<<2) // R/W (clear only) -#define S3C2410_UDC_USBINT_RESUME (1<<1) // R/W (clear only) -#define S3C2410_UDC_USBINT_SUSPEND (1<<0) // R/W (clear only) +#define S3C2410_UDC_USBINT_RESET (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_USBINT_RESUME (1 << 1) /* R/W (clear only) */ +#define S3C2410_UDC_USBINT_SUSPEND (1 << 0) /* R/W (clear only) */ -#define S3C2410_UDC_INTE_EP4 (1<<4) // R/W -#define S3C2410_UDC_INTE_EP3 (1<<3) // R/W -#define S3C2410_UDC_INTE_EP2 (1<<2) // R/W -#define S3C2410_UDC_INTE_EP1 (1<<1) // R/W -#define S3C2410_UDC_INTE_EP0 (1<<0) // R/W - -#define S3C2410_UDC_USBINTE_RESET (1<<2) // R/W -#define S3C2410_UDC_USBINTE_SUSPEND (1<<0) // R/W +#define S3C2410_UDC_INTE_EP4 (1 << 4) /* R/W */ +#define S3C2410_UDC_INTE_EP3 (1 << 3) /* R/W */ +#define S3C2410_UDC_INTE_EP2 (1 << 2) /* R/W */ +#define S3C2410_UDC_INTE_EP1 (1 << 1) /* R/W */ +#define S3C2410_UDC_INTE_EP0 (1 << 0) /* R/W */ +#define S3C2410_UDC_USBINTE_RESET (1 << 2) /* R/W */ +#define S3C2410_UDC_USBINTE_SUSPEND (1 << 0) /* R/W */ #define S3C2410_UDC_INDEX_EP0 (0x00) -#define S3C2410_UDC_INDEX_EP1 (0x01) // ?? -#define S3C2410_UDC_INDEX_EP2 (0x02) // ?? -#define S3C2410_UDC_INDEX_EP3 (0x03) // ?? -#define S3C2410_UDC_INDEX_EP4 (0x04) // ?? - -#define S3C2410_UDC_ICSR1_CLRDT (1<<6) // R/W -#define S3C2410_UDC_ICSR1_SENTSTL (1<<5) // R/W (clear only) -#define S3C2410_UDC_ICSR1_SENDSTL (1<<4) // R/W -#define S3C2410_UDC_ICSR1_FFLUSH (1<<3) // W (set only) -#define S3C2410_UDC_ICSR1_UNDRUN (1<<2) // R/W (clear only) -#define S3C2410_UDC_ICSR1_PKTRDY (1<<0) // R/W (set only) - -#define S3C2410_UDC_ICSR2_AUTOSET (1<<7) // R/W -#define S3C2410_UDC_ICSR2_ISO (1<<6) // R/W -#define S3C2410_UDC_ICSR2_MODEIN (1<<5) // R/W -#define S3C2410_UDC_ICSR2_DMAIEN (1<<4) // R/W - -#define S3C2410_UDC_OCSR1_CLRDT (1<<7) // R/W -#define S3C2410_UDC_OCSR1_SENTSTL (1<<6) // R/W (clear only) -#define S3C2410_UDC_OCSR1_SENDSTL (1<<5) // R/W -#define S3C2410_UDC_OCSR1_FFLUSH (1<<4) // R/W -#define S3C2410_UDC_OCSR1_DERROR (1<<3) // R -#define S3C2410_UDC_OCSR1_OVRRUN (1<<2) // R/W (clear only) -#define S3C2410_UDC_OCSR1_PKTRDY (1<<0) // R/W (clear only) - -#define S3C2410_UDC_OCSR2_AUTOCLR (1<<7) // R/W -#define S3C2410_UDC_OCSR2_ISO (1<<6) // R/W -#define S3C2410_UDC_OCSR2_DMAIEN (1<<5) // R/W - -#define S3C2410_UDC_EP0_CSR_OPKRDY (1<<0) -#define S3C2410_UDC_EP0_CSR_IPKRDY (1<<1) -#define S3C2410_UDC_EP0_CSR_SENTSTL (1<<2) -#define S3C2410_UDC_EP0_CSR_DE (1<<3) -#define S3C2410_UDC_EP0_CSR_SE (1<<4) -#define S3C2410_UDC_EP0_CSR_SENDSTL (1<<5) -#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1<<6) -#define S3C2410_UDC_EP0_CSR_SSE (1<<7) - -#define S3C2410_UDC_MAXP_8 (1<<0) -#define S3C2410_UDC_MAXP_16 (1<<1) -#define S3C2410_UDC_MAXP_32 (1<<2) -#define S3C2410_UDC_MAXP_64 (1<<3) - +#define S3C2410_UDC_INDEX_EP1 (0x01) +#define S3C2410_UDC_INDEX_EP2 (0x02) +#define S3C2410_UDC_INDEX_EP3 (0x03) +#define S3C2410_UDC_INDEX_EP4 (0x04) + +#define S3C2410_UDC_ICSR1_CLRDT (1 << 6) /* R/W */ +#define S3C2410_UDC_ICSR1_SENTSTL (1 << 5) /* R/W (clear only) */ +#define S3C2410_UDC_ICSR1_SENDSTL (1 << 4) /* R/W */ +#define S3C2410_UDC_ICSR1_FFLUSH (1 << 3) /* W (set only) */ +#define S3C2410_UDC_ICSR1_UNDRUN (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_ICSR1_PKTRDY (1 << 0) /* R/W (set only) */ + +#define S3C2410_UDC_ICSR2_AUTOSET (1 << 7) /* R/W */ +#define S3C2410_UDC_ICSR2_ISO (1 << 6) /* R/W */ +#define S3C2410_UDC_ICSR2_MODEIN (1 << 5) /* R/W */ +#define S3C2410_UDC_ICSR2_DMAIEN (1 << 4) /* R/W */ + +#define S3C2410_UDC_OCSR1_CLRDT (1 << 7) /* R/W */ +#define S3C2410_UDC_OCSR1_SENTSTL (1 << 6) /* R/W (clear only) */ +#define S3C2410_UDC_OCSR1_SENDSTL (1 << 5) /* R/W */ +#define S3C2410_UDC_OCSR1_FFLUSH (1 << 4) /* R/W */ +#define S3C2410_UDC_OCSR1_DERROR (1 << 3) /* R */ +#define S3C2410_UDC_OCSR1_OVRRUN (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_OCSR1_PKTRDY (1 << 0) /* R/W (clear only) */ + +#define S3C2410_UDC_OCSR2_AUTOCLR (1 << 7) /* R/W */ +#define S3C2410_UDC_OCSR2_ISO (1 << 6) /* R/W */ +#define S3C2410_UDC_OCSR2_DMAIEN (1 << 5) /* R/W */ + +#define S3C2410_UDC_EP0_CSR_OPKRDY (1 << 0) +#define S3C2410_UDC_EP0_CSR_IPKRDY (1 << 1) +#define S3C2410_UDC_EP0_CSR_SENTSTL (1 << 2) +#define S3C2410_UDC_EP0_CSR_DE (1 << 3) +#define S3C2410_UDC_EP0_CSR_SE (1 << 4) +#define S3C2410_UDC_EP0_CSR_SENDSTL (1 << 5) +#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1 << 6) +#define S3C2410_UDC_EP0_CSR_SSE (1 << 7) + +#define S3C2410_UDC_MAXP_8 (1 << 0) +#define S3C2410_UDC_MAXP_16 (1 << 1) +#define S3C2410_UDC_MAXP_32 (1 << 2) +#define S3C2410_UDC_MAXP_64 (1 << 3) #endif diff --git a/arch/arm/plat-s5p/include/plat/reset.h b/arch/arm/plat-samsung/include/plat/reset.h index 335e978..32ca517 100644 --- a/arch/arm/plat-s5p/include/plat/reset.h +++ b/arch/arm/plat-samsung/include/plat/reset.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/reset.h +/* linux/arch/arm/plat-samsung/include/plat/reset.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -8,9 +8,9 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_S5P_RESET_H -#define __ASM_PLAT_S5P_RESET_H __FILE__ +#ifndef __PLAT_SAMSUNG_RESET_H +#define __PLAT_SAMSUNG_RESET_H __FILE__ extern void (*s5p_reset_hook)(void); -#endif /* __ASM_PLAT_S5P_RESET_H */ +#endif /* __PLAT_SAMSUNG_RESET_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-samsung/include/plat/s3c2410.h index 82ab4aad..3986497 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h +++ b/arch/arm/plat-samsung/include/plat/s3c2410.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h +/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h b/arch/arm/plat-samsung/include/plat/s3c2412.h index bb15d3b..5bcfd14 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h +++ b/arch/arm/plat-samsung/include/plat/s3c2412.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h +/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h index dc3c090..a764f85 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h +++ b/arch/arm/plat-samsung/include/plat/s3c2416.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h +/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h * * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com> * diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h index a19715f..4b2ac9a 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h +++ b/arch/arm/plat-samsung/include/plat/s3c2443.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h +/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h b/arch/arm/plat-samsung/include/plat/s3c244x.h index 89e8d0a..ea0c961 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h +++ b/arch/arm/plat-samsung/include/plat/s3c244x.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h +/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6400.h b/arch/arm/plat-samsung/include/plat/s3c6400.h index f86958d..37d428a 100644 --- a/arch/arm/mach-s3c64xx/include/mach/s3c6400.h +++ b/arch/arm/plat-samsung/include/plat/s3c6400.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h +/* linux/arch/arm/plat-samsung/include/plat/s3c6400.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6410.h b/arch/arm/plat-samsung/include/plat/s3c6410.h index 24f1141..20a6675 100644 --- a/arch/arm/mach-s3c64xx/include/mach/s3c6410.h +++ b/arch/arm/plat-samsung/include/plat/s3c6410.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h +/* linux/arch/arm/plat-samsung/include/plat/s3c6410.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h index 769b5bd..984bf9e 100644 --- a/arch/arm/plat-s5p/include/plat/s5p-clock.h +++ b/arch/arm/plat-samsung/include/plat/s5p-clock.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h +/* linux/arch/arm/plat-samsung/include/plat/s5p-clock.h * * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/arch/arm/plat-s5p/include/plat/s5p-time.h b/arch/arm/plat-samsung/include/plat/s5p-time.h index 575e881..3a70aeb 100644 --- a/arch/arm/plat-s5p/include/plat/s5p-time.h +++ b/arch/arm/plat-samsung/include/plat/s5p-time.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5p-time.h +/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h * * Copyright 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-samsung/include/plat/s5p6440.h index 528585d..bf85ebb 100644 --- a/arch/arm/plat-s5p/include/plat/s5p6440.h +++ b/arch/arm/plat-samsung/include/plat/s5p6440.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s5p/include/plat/s5p6440.h +/* linux/arch/arm/plat-samsung/include/plat/s5p6440.h * * Copyright (c) 2009 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/arch/arm/plat-s5p/include/plat/s5p6450.h b/arch/arm/plat-samsung/include/plat/s5p6450.h index 640a41c..da25f9a 100644 --- a/arch/arm/plat-s5p/include/plat/s5p6450.h +++ b/arch/arm/plat-samsung/include/plat/s5p6450.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s5p/include/plat/s5p6450.h +/* linux/arch/arm/plat-samsung/include/plat/s5p6450.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/arch/arm/plat-s5p/include/plat/s5pc100.h b/arch/arm/plat-samsung/include/plat/s5pc100.h index 5f6099d..9a21aea 100644 --- a/arch/arm/plat-s5p/include/plat/s5pc100.h +++ b/arch/arm/plat-samsung/include/plat/s5pc100.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s5p/include/plat/s5pc100.h +/* linux/arch/arm/plat-samsung/include/plat/s5pc100.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-samsung/include/plat/s5pv210.h index 6c93a0c..b4bc6be7 100644 --- a/arch/arm/plat-s5p/include/plat/s5pv210.h +++ b/arch/arm/plat-samsung/include/plat/s5pv210.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h +/* linux/arch/arm/plat-samsung/include/plat/s5pv210.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 4a65520..e7b3c75 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -55,10 +55,6 @@ enum clk_types { * cd_type == S3C_SDHCI_CD_GPIO * @ext_cd_gpio_invert: invert values for external CD gpio line * @cfg_gpio: Configure the GPIO for a specific card bit-width - * @cfg_card: Configure the interface for a specific card and speed. This - * is necessary the controllers and/or GPIO blocks require the - * changing of driver-strength and other controls dependent on - * the card and speed of operation. * * Initialisation data specific to either the machine or the platform * for the device driver to use or call-back when configuring gpio or @@ -80,10 +76,6 @@ struct s3c_sdhci_platdata { int state)); void (*cfg_gpio)(struct platform_device *dev, int width); - void (*cfg_card)(struct platform_device *dev, - void __iomem *regbase, - struct mmc_ios *ios, - struct mmc_card *card); }; /* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data @@ -139,17 +131,11 @@ extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w); #ifdef CONFIG_S3C2416_SETUP_SDHCI extern char *s3c2416_hsmmc_clksrcs[4]; -extern void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void s3c2416_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card; #endif /* CONFIG_S3C_DEV_HSMMC */ } @@ -158,7 +144,6 @@ static inline void s3c2416_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card; #endif /* CONFIG_S3C_DEV_HSMMC1 */ } @@ -172,17 +157,11 @@ static inline void s3c2416_default_sdhci1(void) { } #ifdef CONFIG_S3C64XX_SETUP_SDHCI extern char *s3c64xx_hsmmc_clksrcs[4]; -extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void s3c6400_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; #endif } @@ -191,7 +170,6 @@ static inline void s3c6400_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; #endif } @@ -200,21 +178,14 @@ static inline void s3c6400_default_sdhci2(void) #ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; #endif } -extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void s3c6410_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; #endif } @@ -223,7 +194,6 @@ static inline void s3c6410_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; #endif } @@ -232,7 +202,6 @@ static inline void s3c6410_default_sdhci2(void) #ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; #endif } @@ -251,17 +220,11 @@ static inline void s3c6400_default_sdhci2(void) { } #ifdef CONFIG_S5PC100_SETUP_SDHCI extern char *s5pc100_hsmmc_clksrcs[4]; -extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void s5pc100_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; #endif } @@ -270,7 +233,6 @@ static inline void s5pc100_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; #endif } @@ -279,7 +241,6 @@ static inline void s5pc100_default_sdhci2(void) #ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; #endif } @@ -295,17 +256,11 @@ static inline void s5pc100_default_sdhci2(void) { } #ifdef CONFIG_S5PV210_SETUP_SDHCI extern char *s5pv210_hsmmc_clksrcs[4]; -extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void s5pv210_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; #endif } @@ -314,7 +269,6 @@ static inline void s5pv210_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; #endif } @@ -323,7 +277,6 @@ static inline void s5pv210_default_sdhci2(void) #ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; #endif } @@ -332,7 +285,6 @@ static inline void s5pv210_default_sdhci3(void) #ifdef CONFIG_S3C_DEV_HSMMC3 s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio; - s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; #endif } @@ -348,17 +300,11 @@ static inline void s5pv210_default_sdhci3(void) { } #ifdef CONFIG_EXYNOS4_SETUP_SDHCI extern char *exynos4_hsmmc_clksrcs[4]; -extern void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void exynos4_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } @@ -367,7 +313,6 @@ static inline void exynos4_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } @@ -376,7 +321,6 @@ static inline void exynos4_default_sdhci2(void) #ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } @@ -385,7 +329,6 @@ static inline void exynos4_default_sdhci3(void) #ifdef CONFIG_S3C_DEV_HSMMC3 s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio; - s3c_hsmmc3_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-samsung/include/plat/sysmmu.h index bf5283c..5fe8ee0 100644 --- a/arch/arm/plat-s5p/include/plat/sysmmu.h +++ b/arch/arm/plat-samsung/include/plat/sysmmu.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h +/* linux/arch/arm/plat-samsung/include/plat/sysmmu.h * * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -10,8 +10,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM__PLAT_SYSMMU_H -#define __ASM__PLAT_SYSMMU_H __FILE__ +#ifndef __PLAT_SAMSUNG_SYSMMU_H +#define __PLAT_SAMSUNG_SYSMMU_H __FILE__ enum S5P_SYSMMU_INTERRUPT_TYPE { SYSMMU_PAGEFAULT, diff --git a/arch/arm/plat-s5p/include/plat/system-reset.h b/arch/arm/plat-samsung/include/plat/system-reset.h index f307f34..a448e990 100644 --- a/arch/arm/plat-s5p/include/plat/system-reset.h +++ b/arch/arm/plat-samsung/include/plat/system-reset.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/system-reset.h +/* linux/arch/arm/plat-samsung/include/plat/system-reset.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/arch/arm/plat-s3c24xx/include/plat/udc.h b/arch/arm/plat-samsung/include/plat/udc.h index f6388424..8c22d58 100644 --- a/arch/arm/plat-s3c24xx/include/plat/udc.h +++ b/arch/arm/plat-samsung/include/plat/udc.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/udc.h +/* arch/arm/plat-samsung/include/plat/udc.h * * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> * @@ -26,7 +26,7 @@ enum s3c2410_udc_cmd_e { struct s3c2410_udc_mach_info { void (*udc_command)(enum s3c2410_udc_cmd_e); - void (*vbus_draw)(unsigned int ma); + void (*vbus_draw)(unsigned int ma); unsigned int pullup_pin; unsigned int pullup_pin_inverted; diff --git a/arch/arm/plat-s5p/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h index 6dd6bcf..959bcdb 100644 --- a/arch/arm/plat-s5p/include/plat/usb-phy.h +++ b/arch/arm/plat-samsung/include/plat/usb-phy.h @@ -8,8 +8,8 @@ * option) any later version. */ -#ifndef __PLAT_S5P_USB_PHY_H -#define __PLAT_S5P_USB_PHY_H +#ifndef __PLAT_SAMSUNG_USB_PHY_H +#define __PLAT_SAMSUNG_USB_PHY_H __FILE__ enum s5p_usb_phy_type { S5P_USB_PHY_DEVICE, @@ -19,4 +19,4 @@ enum s5p_usb_phy_type { extern int s5p_usb_phy_init(struct platform_device *pdev, int type); extern int s5p_usb_phy_exit(struct platform_device *pdev, int type); -#endif /* __PLAT_S5P_REGS_USB_PHY_H */ +#endif /* __PLAT_SAMSUNG_USB_PHY_H */ diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c index 6de1a38..4c9a207 100644 --- a/arch/arm/plat-samsung/platformdata.c +++ b/arch/arm/plat-samsung/platformdata.c @@ -50,8 +50,6 @@ void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd, set->max_width = pd->max_width; if (pd->cfg_gpio) set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; if (pd->host_caps) set->host_caps |= pd->host_caps; if (pd->clk_type) diff --git a/arch/arm/plat-samsung/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c index f1bba88..a35ff3b 100644 --- a/arch/arm/plat-samsung/pwm-clock.c +++ b/arch/arm/plat-samsung/pwm-clock.c @@ -27,7 +27,7 @@ #include <plat/cpu.h> #include <plat/regs-timer.h> -#include <mach/pwm-clock.h> +#include <plat/pwm-clock.h> /* Each of the timers 0 through 5 go through the following * clock tree, with the inputs depending on the timers. @@ -339,8 +339,17 @@ static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent) unsigned long bits; unsigned long shift = S3C2410_TCFG1_SHIFT(id); + unsigned long mux_tclk; + + if (soc_is_s3c24xx()) + mux_tclk = S3C2410_TCFG1_MUX_TCLK; + else if (soc_is_s5p6440() || soc_is_s5p6450()) + mux_tclk = 0; + else + mux_tclk = S3C64XX_TCFG1_MUX_TCLK; + if (parent == s3c24xx_pwmclk_tclk(id)) - bits = S3C_TCFG1_MUX_TCLK << shift; + bits = mux_tclk << shift; else if (parent == s3c24xx_pwmclk_tdiv(id)) bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift; else |
