summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-omap1/clock_data.c4
-rw-r--r--arch/arm/mach-omap1/devices.c35
-rw-r--r--arch/arm/mach-omap1/mux.c8
-rw-r--r--arch/arm/mach-omap2/Kconfig1
-rwxr-xr-xarch/arm/mach-omap2/board-zoom-peripherals.c8
-rw-r--r--arch/arm/mach-omap2/mux.c6
-rw-r--r--arch/arm/mach-omap2/pm34xx.c4
-rw-r--r--arch/arm/mach-omap2/serial.c12
-rw-r--r--arch/arm/plat-omap/gpio.c63
-rw-r--r--arch/arm/plat-omap/include/plat/board.h1
-rw-r--r--arch/arm/plat-omap/include/plat/control.h2
-rw-r--r--arch/arm/plat-omap/include/plat/mux.h8
-rw-r--r--arch/arm/plat-omap/include/plat/omap7xx.h3
-rw-r--r--arch/arm/plat-omap/iommu.c2
-rw-r--r--arch/arm/plat-omap/mcbsp.c20
15 files changed, 159 insertions, 18 deletions
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 8a85bbb..65e7b5b 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -658,6 +658,10 @@ static struct omap_clk omap_clks[] = {
CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX),
CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX),
+ CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX),
+ CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX),
+ CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX),
+ CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX),
CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX),
CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310),
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 23ded2d..a2d07aa 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/spi/spi.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
@@ -23,6 +24,7 @@
#include <plat/mux.h>
#include <mach/gpio.h>
#include <plat/mmc.h>
+#include <plat/omap7xx.h>
/*-------------------------------------------------------------------------*/
@@ -196,6 +198,38 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
/*-------------------------------------------------------------------------*/
+/* OMAP7xx SPI support */
+#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
+
+struct platform_device omap_spi1 = {
+ .name = "omap1_spi100k",
+ .id = 1,
+};
+
+struct platform_device omap_spi2 = {
+ .name = "omap1_spi100k",
+ .id = 2,
+};
+
+static void omap_init_spi100k(void)
+{
+ omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
+ if (omap_spi1.dev.platform_data)
+ platform_device_register(&omap_spi1);
+
+ omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
+ if (omap_spi2.dev.platform_data)
+ platform_device_register(&omap_spi2);
+}
+
+#else
+static inline void omap_init_spi100k(void)
+{
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
#if defined(CONFIG_OMAP_STI)
#define OMAP1_STI_BASE 0xfffea000
@@ -263,6 +297,7 @@ static int __init omap1_init_devices(void)
omap_init_mbox();
omap_init_rtc();
+ omap_init_spi100k();
omap_init_sti();
return 0;
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 07212cc..8434137 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -62,6 +62,14 @@ MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0)
/* I2C interface */
MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0)
MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0)
+
+/* SPI pins */
+MUX_CFG_7XX("SPI_7XX_1", 6, 5, 4, 4, 1, 0)
+MUX_CFG_7XX("SPI_7XX_2", 6, 9, 4, 8, 1, 0)
+MUX_CFG_7XX("SPI_7XX_3", 6, 13, 4, 12, 1, 0)
+MUX_CFG_7XX("SPI_7XX_4", 6, 17, 4, 16, 1, 0)
+MUX_CFG_7XX("SPI_7XX_5", 8, 25, 0, 24, 0, 0)
+MUX_CFG_7XX("SPI_7XX_6", 9, 5, 0, 4, 0, 0)
};
#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins)
#else
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 10eafa7..606bf04 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -80,6 +80,7 @@ config MACH_OVERO
config MACH_OMAP3EVM
bool "OMAP 3530 EVM board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP3517EVM
bool "OMAP3517/ AM3517 EVM board"
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 8dd277c..1e3dfb6 100755
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -63,21 +63,21 @@ static int board_keymap[] = {
KEY(5, 1, KEY_H),
KEY(5, 2, KEY_J),
KEY(5, 3, KEY_F3),
+ KEY(5, 4, KEY_UNKNOWN),
KEY(5, 5, KEY_VOLUMEDOWN),
KEY(5, 6, KEY_M),
- KEY(5, 7, KEY_ENTER),
+ KEY(5, 7, KEY_RIGHT),
KEY(6, 0, KEY_Q),
KEY(6, 1, KEY_A),
KEY(6, 2, KEY_N),
KEY(6, 3, KEY_BACKSPACE),
KEY(6, 6, KEY_P),
- KEY(6, 7, KEY_SELECT),
+ KEY(6, 7, KEY_UP),
KEY(7, 0, KEY_PROG1), /*MACRO 1 <User defined> */
KEY(7, 1, KEY_PROG2), /*MACRO 2 <User defined> */
KEY(7, 2, KEY_PROG3), /*MACRO 3 <User defined> */
KEY(7, 3, KEY_PROG4), /*MACRO 4 <User defined> */
- KEY(7, 5, KEY_RIGHT),
- KEY(7, 6, KEY_UP),
+ KEY(7, 6, KEY_SELECT),
KEY(7, 7, KEY_DOWN)
};
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index e071b3f..459ef23a 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -994,8 +994,10 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
}
#ifdef CONFIG_OMAP_MUX
- omap_mux_package_fixup(package_subset, superset);
- omap_mux_package_init_balls(package_balls, superset);
+ if (package_subset)
+ omap_mux_package_fixup(package_subset, superset);
+ if (package_balls)
+ omap_mux_package_init_balls(package_balls, superset);
omap_mux_set_cmdline_signals();
omap_mux_set_board_signals(board_mux);
#endif
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 81ed252..c6cc809 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -124,8 +124,8 @@ static void omap3_core_save_context(void)
control_padconf_off |= START_PADCONF_SAVE;
omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF);
/* wait for the save to complete */
- while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
- & PADCONF_SAVE_DONE)
+ while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
+ & PADCONF_SAVE_DONE))
;
/* Save the Interrupt controller context */
omap_intc_save_context();
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 19805a7..8c964be 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -125,6 +125,13 @@ static struct plat_serial8250_port serial_platform_data3[] = {
}
};
#endif
+static inline unsigned int __serial_read_reg(struct uart_port *up,
+ int offset)
+{
+ offset <<= up->regshift;
+ return (unsigned int)__raw_readb(up->membase + offset);
+}
+
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
int offset)
{
@@ -583,11 +590,12 @@ static unsigned int serial_in_override(struct uart_port *up, int offset)
{
if (UART_RX == offset) {
unsigned int lsr;
- lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR);
+ lsr = __serial_read_reg(up, UART_LSR);
if (!(lsr & UART_LSR_DR))
return -EPERM;
}
- return serial_read_reg(omap_uart[up->line].p, offset);
+
+ return __serial_read_reg(up, offset);
}
void __init omap_serial_early_init(void)
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 0484681..d17620c 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -192,6 +192,7 @@ struct gpio_bank {
u32 saved_risingdetect;
#endif
u32 level_mask;
+ u32 toggle_mask;
spinlock_t lock;
struct gpio_chip chip;
struct clk *dbck;
@@ -749,6 +750,44 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
}
#endif
+/*
+ * This only applies to chips that can't do both rising and falling edge
+ * detection at once. For all other chips, this function is a noop.
+ */
+static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
+{
+ void __iomem *reg = bank->base;
+ u32 l = 0;
+
+ switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+ case METHOD_MPUIO:
+ reg += OMAP_MPUIO_GPIO_INT_EDGE;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+ case METHOD_GPIO_1510:
+ reg += OMAP1510_GPIO_INT_CONTROL;
+ break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ case METHOD_GPIO_7XX:
+ reg += OMAP7XX_GPIO_INT_CONTROL;
+ break;
+#endif
+ default:
+ return;
+ }
+
+ l = __raw_readl(reg);
+ if ((l >> gpio) & 1)
+ l &= ~(1 << gpio);
+ else
+ l |= 1 << gpio;
+
+ __raw_writel(l, reg);
+}
+
static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
{
void __iomem *reg = bank->base;
@@ -759,6 +798,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE;
l = __raw_readl(reg);
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
else if (trigger & IRQ_TYPE_EDGE_FALLING)
@@ -771,6 +812,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL;
l = __raw_readl(reg);
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
else if (trigger & IRQ_TYPE_EDGE_FALLING)
@@ -803,6 +846,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
case METHOD_GPIO_7XX:
reg += OMAP7XX_GPIO_INT_CONTROL;
l = __raw_readl(reg);
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
else if (trigger & IRQ_TYPE_EDGE_FALLING)
@@ -1072,7 +1117,7 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena
*/
static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
{
- unsigned long flags;
+ unsigned long uninitialized_var(flags);
switch (bank->method) {
#ifdef CONFIG_ARCH_OMAP16XX
@@ -1217,7 +1262,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
{
void __iomem *isr_reg = NULL;
u32 isr;
- unsigned int gpio_irq;
+ unsigned int gpio_irq, gpio_index;
struct gpio_bank *bank;
u32 retrigger = 0;
int unmasked = 0;
@@ -1284,9 +1329,23 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
gpio_irq = bank->virtual_irq_start;
for (; isr != 0; isr >>= 1, gpio_irq++) {
+ gpio_index = get_gpio_index(irq_to_gpio(gpio_irq));
+
if (!(isr & 1))
continue;
+#ifdef CONFIG_ARCH_OMAP1
+ /*
+ * Some chips can't respond to both rising and falling
+ * at the same time. If this irq was requested with
+ * both flags, we need to flip the ICR data for the IRQ
+ * to respond to the IRQ for the opposite direction.
+ * This will be indicated in the bank toggle_mask.
+ */
+ if (bank->toggle_mask & (1 << gpio_index))
+ _toggle_gpio_edge_triggering(bank, gpio_index);
+#endif
+
generic_handle_irq(gpio_irq);
}
}
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index 376ce18..5cd6220 100644
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -99,7 +99,6 @@ struct fb_info;
struct omap_backlight_config {
int default_intensity;
int (*set_power)(struct device *dev, int state);
- int (*check_fb)(struct fb_info *fb);
};
struct omap_fbmem_config {
diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h
index 2ae8843..a745d62 100644
--- a/arch/arm/plat-omap/include/plat/control.h
+++ b/arch/arm/plat-omap/include/plat/control.h
@@ -147,7 +147,7 @@
#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
#define OMAP343X_CONTROL_DEBOBS(i) (OMAP2_CONTROL_GENERAL + 0x01B0 \
- + ((i) >> 1) * 4 + (!(i) & 1) * 2)
+ + ((i) >> 1) * 4 + (!((i) & 1)) * 2)
#define OMAP343X_CONTROL_PROG_IO0 (OMAP2_CONTROL_GENERAL + 0x01D4)
#define OMAP343X_CONTROL_PROG_IO1 (OMAP2_CONTROL_GENERAL + 0x01D8)
#define OMAP343X_CONTROL_DSS_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E0)
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index 8f069cc..692c90e 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -183,6 +183,14 @@ enum omap7xx_index {
/* I2C */
I2C_7XX_SCL,
I2C_7XX_SDA,
+
+ /* SPI */
+ SPI_7XX_1,
+ SPI_7XX_2,
+ SPI_7XX_3,
+ SPI_7XX_4,
+ SPI_7XX_5,
+ SPI_7XX_6,
};
enum omap1xxx_index {
diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h
index 53f5241..48e4757 100644
--- a/arch/arm/plat-omap/include/plat/omap7xx.h
+++ b/arch/arm/plat-omap/include/plat/omap7xx.h
@@ -46,6 +46,9 @@
#define OMAP7XX_DSPREG_SIZE SZ_128K
#define OMAP7XX_DSPREG_START 0xE1000000
+#define OMAP7XX_SPI1_BASE 0xfffc0800
+#define OMAP7XX_SPI2_BASE 0xfffc1000
+
/*
* ----------------------------------------------------------------------------
* OMAP7XX specific configuration registers
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index c0ff1e3..463d638 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -827,7 +827,7 @@ EXPORT_SYMBOL_GPL(iommu_get);
**/
void iommu_put(struct iommu *obj)
{
- if (!obj && IS_ERR(obj))
+ if (!obj || IS_ERR(obj))
return;
mutex_lock(&obj->iommu_lock);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 2cc1cc3..f757672 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -436,7 +436,7 @@ int omap_mcbsp_request(unsigned int id)
dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
"for McBSP%d\n", mcbsp->tx_irq,
mcbsp->id);
- return err;
+ goto error;
}
init_completion(&mcbsp->rx_irq_completion);
@@ -446,12 +446,26 @@ int omap_mcbsp_request(unsigned int id)
dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
"for McBSP%d\n", mcbsp->rx_irq,
mcbsp->id);
- free_irq(mcbsp->tx_irq, (void *)mcbsp);
- return err;
+ goto tx_irq;
}
}
return 0;
+tx_irq:
+ free_irq(mcbsp->tx_irq, (void *)mcbsp);
+error:
+ if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
+ mcbsp->pdata->ops->free(id);
+
+ /* Do procedure specific to omap34xx arch, if applicable */
+ omap34xx_mcbsp_free(mcbsp);
+
+ clk_disable(mcbsp->fclk);
+ clk_disable(mcbsp->iclk);
+
+ mcbsp->free = 1;
+
+ return err;
}
EXPORT_SYMBOL(omap_mcbsp_request);
OpenPOWER on IntegriCloud