diff options
Diffstat (limited to 'arch/arm')
30 files changed, 226 insertions, 143 deletions
diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts index db2060c..9c1167b0 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -26,7 +26,7 @@ cpu-offset = <0x80000>; }; - msmgpio: gpio@fd510000 { + msmgpio: gpio@800000 { compatible = "qcom,msm-gpio"; gpio-controller; #gpio-cells = <2>; @@ -34,7 +34,7 @@ interrupts = <0 32 0x4>; interrupt-controller; #interrupt-cells = <2>; - reg = <0xfd510000 0x4000>; + reg = <0x800000 0x4000>; }; serial@16440000 { diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 08b7267..65d7b60 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -235,7 +235,7 @@ }; &mmc1 { - vmmc-supply = <&vmmcsd_fixed>; + vmmc-supply = <&ldo9_reg>; bus-width = <4>; }; @@ -282,6 +282,7 @@ regulators { smps123_reg: smps123 { + /* VDD_OPP_MPU */ regulator-name = "smps123"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1500000>; @@ -290,6 +291,7 @@ }; smps45_reg: smps45 { + /* VDD_OPP_MM */ regulator-name = "smps45"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1310000>; @@ -298,6 +300,7 @@ }; smps6_reg: smps6 { + /* VDD_DDR3 - over VDD_SMPS6 */ regulator-name = "smps6"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -306,6 +309,7 @@ }; smps7_reg: smps7 { + /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ regulator-name = "smps7"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -314,6 +318,7 @@ }; smps8_reg: smps8 { + /* VDD_OPP_CORE */ regulator-name = "smps8"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1310000>; @@ -322,15 +327,15 @@ }; smps9_reg: smps9 { + /* VDDA_2v1_AUD over VDD_2v1 */ regulator-name = "smps9"; regulator-min-microvolt = <2100000>; regulator-max-microvolt = <2100000>; - regulator-always-on; - regulator-boot-on; ti,smps-range = <0x80>; }; smps10_reg: smps10 { + /* VBUS_5V_OTG */ regulator-name = "smps10"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -339,38 +344,40 @@ }; ldo1_reg: ldo1 { + /* VDDAPHY_CAM: vdda_csiport */ regulator-name = "ldo1"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; }; ldo2_reg: ldo2 { + /* VCC_2V8_DISP: Does not go anywhere */ regulator-name = "ldo2"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + /* Unused */ + status = "disabled"; }; ldo3_reg: ldo3 { + /* VDDAPHY_MDM: vdda_lli */ regulator-name = "ldo3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-boot-on; + /* Only if Modem is used */ + status = "disabled"; }; ldo4_reg: ldo4 { + /* VDDAPHY_DISP: vdda_dsiport/hdmi */ regulator-name = "ldo4"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; }; ldo5_reg: ldo5 { + /* VDDA_1V8_PHY: usb/sata/hdmi.. */ regulator-name = "ldo5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -379,38 +386,43 @@ }; ldo6_reg: ldo6 { + /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ regulator-name = "ldo6"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; }; ldo7_reg: ldo7 { + /* VDD_VPP: vpp1 */ regulator-name = "ldo7"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + /* Only for efuse reprograming! */ + status = "disabled"; }; ldo8_reg: ldo8 { + /* VDD_3v0: Does not go anywhere */ regulator-name = "ldo8"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; regulator-boot-on; + /* Unused */ + status = "disabled"; }; ldo9_reg: ldo9 { + /* VCC_DV_SDIO: vdds_sdcard */ regulator-name = "ldo9"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; + regulator-max-microvolt = <3000000>; regulator-boot-on; }; ldoln_reg: ldoln { + /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ regulator-name = "ldoln"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -419,12 +431,20 @@ }; ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ regulator-name = "ldousb"; regulator-min-microvolt = <3250000>; regulator-max-microvolt = <3250000>; regulator-always-on; regulator-boot-on; }; + + regen3_reg: regen3 { + /* REGEN3 controls LDO9 supply to card */ + regulator-name = "regen3"; + regulator-always-on; + regulator-boot-on; + }; }; }; }; diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi index 7321403..f5b9898 100644 --- a/arch/arm/boot/dts/stih41x.dtsi +++ b/arch/arm/boot/dts/stih41x.dtsi @@ -6,10 +6,12 @@ #address-cells = <1>; #size-cells = <0>; cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; }; cpu@1 { + device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; }; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 2fcb3f2..5592be6 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -457,6 +457,7 @@ }; usb-phy@c5004000 { + status = "okay"; nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index 6462a72..a252c0b 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -88,4 +88,7 @@ static inline u32 mpidr_hash_size(void) { return 1 << mpidr_hash.bits; } + +extern int platform_can_cpu_hotplug(void); + #endif diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index f8b8965..b07c09e 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -107,7 +107,7 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock) " subs %1, %0, %0, ror #16\n" " addeq %0, %0, %4\n" " strexeq %2, %0, [%3]" - : "=&r" (slock), "=&r" (contended), "=r" (res) + : "=&r" (slock), "=&r" (contended), "=&r" (res) : "r" (&lock->slock), "I" (1 << TICKET_SHIFT) : "cc"); } while (res); @@ -168,17 +168,20 @@ static inline void arch_write_lock(arch_rwlock_t *rw) static inline int arch_write_trylock(arch_rwlock_t *rw) { - unsigned long tmp; + unsigned long contended, res; - __asm__ __volatile__( -" ldrex %0, [%1]\n" -" teq %0, #0\n" -" strexeq %0, %2, [%1]" - : "=&r" (tmp) - : "r" (&rw->lock), "r" (0x80000000) - : "cc"); + do { + __asm__ __volatile__( + " ldrex %0, [%2]\n" + " mov %1, #0\n" + " teq %0, #0\n" + " strexeq %1, %3, [%2]" + : "=&r" (contended), "=&r" (res) + : "r" (&rw->lock), "r" (0x80000000) + : "cc"); + } while (res); - if (tmp == 0) { + if (!contended) { smp_mb(); return 1; } else { @@ -254,18 +257,26 @@ static inline void arch_read_unlock(arch_rwlock_t *rw) static inline int arch_read_trylock(arch_rwlock_t *rw) { - unsigned long tmp, tmp2 = 1; + unsigned long contended, res; - __asm__ __volatile__( -" ldrex %0, [%2]\n" -" adds %0, %0, #1\n" -" strexpl %1, %0, [%2]\n" - : "=&r" (tmp), "+r" (tmp2) - : "r" (&rw->lock) - : "cc"); + do { + __asm__ __volatile__( + " ldrex %0, [%2]\n" + " mov %1, #0\n" + " adds %0, %0, #1\n" + " strexpl %1, %0, [%2]" + : "=&r" (contended), "=&r" (res) + : "r" (&rw->lock) + : "cc"); + } while (res); - smp_mb(); - return tmp2 == 0; + /* If the lock is negative, then it is already held for write. */ + if (contended < 0x80000000) { + smp_mb(); + return 1; + } else { + return 0; + } } /* read_can_lock - would read_trylock() succeed? */ diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 46e7cfb..0baf7f0 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -43,6 +43,7 @@ struct mmu_gather { struct mm_struct *mm; unsigned int fullmm; struct vm_area_struct *vma; + unsigned long start, end; unsigned long range_start; unsigned long range_end; unsigned int nr; @@ -107,10 +108,12 @@ static inline void tlb_flush_mmu(struct mmu_gather *tlb) } static inline void -tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int fullmm) +tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) { tlb->mm = mm; - tlb->fullmm = fullmm; + tlb->fullmm = !(start | (end+1)); + tlb->start = start; + tlb->end = end; tlb->vma = NULL; tlb->max = ARRAY_SIZE(tlb->local); tlb->pages = tlb->local; diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index d40d0ef..9cbe70c 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -357,7 +357,8 @@ ENDPROC(__pabt_svc) .endm .macro kuser_cmpxchg_check -#if !defined(CONFIG_CPU_32v6K) && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) +#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS) && \ + !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) #ifndef CONFIG_MMU #warning "NPTL on non MMU needs fixing" #else diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index 25442f4..fc79202 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -84,17 +84,13 @@ int show_fiq_list(struct seq_file *p, int prec) void set_fiq_handler(void *start, unsigned int length) { -#if defined(CONFIG_CPU_USE_DOMAINS) - void *base = (void *)0xffff0000; -#else void *base = vectors_page; -#endif unsigned offset = FIQ_OFFSET; memcpy(base + offset, start, length); + if (!cache_is_vipt_nonaliasing()) + flush_icache_range(base + offset, offset + length); flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length); - if (!vectors_high()) - flush_icache_range(offset, offset + length); } int claim_fiq(struct fiq_handler *f) diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 4fb074c..d7c82df 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -15,6 +15,7 @@ #include <asm/mmu_context.h> #include <asm/cacheflush.h> #include <asm/mach-types.h> +#include <asm/smp_plat.h> #include <asm/system_misc.h> extern const unsigned char relocate_new_kernel[]; @@ -39,6 +40,14 @@ int machine_kexec_prepare(struct kimage *image) int i, err; /* + * Validate that if the current HW supports SMP, then the SW supports + * and implements CPU hotplug for the current HW. If not, we won't be + * able to kexec reliably, so fail the prepare operation. + */ + if (num_possible_cpus() > 1 && !platform_can_cpu_hotplug()) + return -EINVAL; + + /* * No segment at default ATAGs address. try to locate * a dtb using magic. */ @@ -134,10 +143,13 @@ void machine_kexec(struct kimage *image) unsigned long reboot_code_buffer_phys; void *reboot_code_buffer; - if (num_online_cpus() > 1) { - pr_err("kexec: error: multiple CPUs still online\n"); - return; - } + /* + * This can only happen if machine_shutdown() failed to disable some + * CPU, and that can only happen if the checks in + * machine_kexec_prepare() were not correct. If this fails, we can't + * reliably kexec anyway, so BUG_ON is appropriate. + */ + BUG_ON(num_online_cpus() > 1); page_list = image->head & PAGE_MASK; diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index d9f5cd4..e186ee1 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -53,7 +53,12 @@ armpmu_map_cache_event(const unsigned (*cache_map) static int armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config) { - int mapping = (*event_map)[config]; + int mapping; + + if (config >= PERF_COUNT_HW_MAX) + return -EINVAL; + + mapping = (*event_map)[config]; return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping; } @@ -253,6 +258,9 @@ validate_event(struct pmu_hw_events *hw_events, struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct pmu *leader_pmu = event->group_leader->pmu; + if (is_software_event(event)) + return 1; + if (event->pmu != leader_pmu || event->state < PERF_EVENT_STATE_OFF) return 1; diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 536c85f..94f6b05 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -462,7 +462,7 @@ int in_gate_area_no_mm(unsigned long addr) { return in_gate_area(NULL, addr); } -#define is_gate_vma(vma) ((vma) = &gate_vma) +#define is_gate_vma(vma) ((vma) == &gate_vma) #else #define is_gate_vma(vma) 0 #endif diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index c2b4f8f..2dc19349e 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -145,6 +145,16 @@ int boot_secondary(unsigned int cpu, struct task_struct *idle) return -ENOSYS; } +int platform_can_cpu_hotplug(void) +{ +#ifdef CONFIG_HOTPLUG_CPU + if (smp_ops.cpu_kill) + return 1; +#endif + + return 0; +} + #ifdef CONFIG_HOTPLUG_CPU static void percpu_timer_stop(void); diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 614e41e..905efc8 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -121,8 +121,7 @@ config MSM_SMD bool config MSM_GPIOMUX - depends on !(ARCH_MSM8X60 || ARCH_MSM8960) - bool "MSM V1 TLMM GPIOMUX architecture" + bool help Support for MSM V1 TLMM GPIOMUX architecture. diff --git a/arch/arm/mach-msm/gpiomux-v1.c b/arch/arm/mach-msm/gpiomux-v1.c deleted file mode 100644 index 27de2ab..0000000 --- a/arch/arm/mach-msm/gpiomux-v1.c +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include <linux/kernel.h> -#include "gpiomux.h" -#include "proc_comm.h" - -void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val) -{ - unsigned tlmm_config = (val & ~GPIOMUX_CTL_MASK) | - ((gpio & 0x3ff) << 4); - unsigned tlmm_disable = 0; - int rc; - - rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, - &tlmm_config, &tlmm_disable); - if (rc) - pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n", - __func__, rc, tlmm_config, tlmm_disable); -} diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h index 8e82f41..4410d77 100644 --- a/arch/arm/mach-msm/gpiomux.h +++ b/arch/arm/mach-msm/gpiomux.h @@ -73,16 +73,6 @@ extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS]; int msm_gpiomux_write(unsigned gpio, gpiomux_config_t active, gpiomux_config_t suspended); - -/* Architecture-internal function for use by the framework only. - * This function can assume the following: - * - the gpio value has passed a bounds-check - * - the gpiomux spinlock has been obtained - * - * This function is not for public consumption. External users - * should use msm_gpiomux_write. - */ -void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val); #else static inline int msm_gpiomux_write(unsigned gpio, gpiomux_config_t active, diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 393aeef..043e570 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -42,7 +42,7 @@ /* Using generic display panel */ static struct tfp410_platform_data omap4_dvi_panel = { - .i2c_bus_num = 3, + .i2c_bus_num = 2, .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, }; diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 5cc9287..f99f68e 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -129,6 +129,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; const char *oh_name; int oh_cnt, i, ret = 0; + bool device_active = false; oh_cnt = of_property_count_strings(node, "ti,hwmods"); if (oh_cnt <= 0) { @@ -152,6 +153,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev) goto odbfd_exit1; } hwmods[i] = oh; + if (oh->flags & HWMOD_INIT_NO_IDLE) + device_active = true; } od = omap_device_alloc(pdev, hwmods, oh_cnt); @@ -172,6 +175,11 @@ static int omap_device_build_from_dt(struct platform_device *pdev) pdev->dev.pm_domain = &omap_device_pm_domain; + if (device_active) { + omap_device_enable(pdev); + pm_runtime_set_active(&pdev->dev); + } + odbfd_exit1: kfree(hwmods); odbfd_exit: @@ -842,6 +850,7 @@ static int __init omap_device_late_idle(struct device *dev, void *data) { struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); + int i; if (!od) return 0; @@ -850,6 +859,15 @@ static int __init omap_device_late_idle(struct device *dev, void *data) * If omap_device state is enabled, but has no driver bound, * idle it. */ + + /* + * Some devices (like memory controllers) are always kept + * enabled, and should not be idled even with no drivers. + */ + for (i = 0; i < od->hwmods_cnt; i++) + if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE) + return 0; + if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) { if (od->_state == OMAP_DEVICE_STATE_ENABLED) { dev_warn(dev, "%s: enabled but no driver. Idling\n", diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 7341eff..7f4db12 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2386,7 +2386,7 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data) np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh); if (np) - va_start = of_iomap(np, 0); + va_start = of_iomap(np, oh->mpu_rt_idx); } else { va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index aab33fd..e1482a9 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -95,6 +95,54 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; #define MODULEMODE_HWCTRL 1 #define MODULEMODE_SWCTRL 2 +#define DEBUG_OMAP2UART1_FLAGS 0 +#define DEBUG_OMAP2UART2_FLAGS 0 +#define DEBUG_OMAP2UART3_FLAGS 0 +#define DEBUG_OMAP3UART3_FLAGS 0 +#define DEBUG_OMAP3UART4_FLAGS 0 +#define DEBUG_OMAP4UART3_FLAGS 0 +#define DEBUG_OMAP4UART4_FLAGS 0 +#define DEBUG_TI81XXUART1_FLAGS 0 +#define DEBUG_TI81XXUART2_FLAGS 0 +#define DEBUG_TI81XXUART3_FLAGS 0 +#define DEBUG_AM33XXUART1_FLAGS 0 + +#define DEBUG_OMAPUART_FLAGS (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET) + +#if defined(CONFIG_DEBUG_OMAP2UART1) +#undef DEBUG_OMAP2UART1_FLAGS +#define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP2UART2) +#undef DEBUG_OMAP2UART2_FLAGS +#define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP2UART3) +#undef DEBUG_OMAP2UART3_FLAGS +#define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP3UART3) +#undef DEBUG_OMAP3UART3_FLAGS +#define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP3UART4) +#undef DEBUG_OMAP3UART4_FLAGS +#define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP4UART3) +#undef DEBUG_OMAP4UART3_FLAGS +#define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP4UART4) +#undef DEBUG_OMAP4UART4_FLAGS +#define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART1) +#undef DEBUG_TI81XXUART1_FLAGS +#define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART2) +#undef DEBUG_TI81XXUART2_FLAGS +#define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART3) +#undef DEBUG_TI81XXUART3_FLAGS +#define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_AM33XXUART1) +#undef DEBUG_AM33XXUART1_FLAGS +#define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS +#endif /** * struct omap_hwmod_mux_info - hwmod specific mux configuration @@ -568,6 +616,7 @@ struct omap_hwmod_link { * @voltdm: pointer to voltage domain (filled in at runtime) * @dev_attr: arbitrary device attributes that can be passed to the driver * @_sysc_cache: internal-use hwmod flags + * @mpu_rt_idx: index of device address space for register target (for DT boot) * @_mpu_rt_va: cached register target start address (internal use) * @_mpu_port: cached MPU register target slave (internal use) * @opt_clks_cnt: number of @opt_clks @@ -617,6 +666,7 @@ struct omap_hwmod { struct list_head node; struct omap_hwmod_ocp_if *_mpu_port; u16 flags; + u8 mpu_rt_idx; u8 response_lat; u8 rst_lines_cnt; u8 opt_clks_cnt; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index d05fc7b..56cebb0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -512,7 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -532,7 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -552,7 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 28bbd56..eb2f3b9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -562,6 +562,7 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = { .clkdm_name = "cpsw_125mhz_clkdm", .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), .main_clk = "cpsw_125mhz_gclk", + .mpu_rt_idx = 1, .prcm = { .omap4 = { .clkctrl_offs = AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET, @@ -1512,7 +1513,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = { .name = "uart1", .class = &uart_class, .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "dpll_per_m2_div4_wkupdm_ck", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index f7a3df2..0c3a427 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -490,7 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -509,7 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -528,7 +528,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS | + HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -558,7 +559,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index d04b5e6..9c3b504 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2858,8 +2858,7 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | - HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -2875,7 +2874,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index f37ae96..3c70f5c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1375,7 +1375,7 @@ static struct omap_hwmod omap54xx_uart3_hwmod = { .name = "uart3", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = DEBUG_OMAP4UART3_FLAGS, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -1391,6 +1391,7 @@ static struct omap_hwmod omap54xx_uart4_hwmod = { .name = "uart4", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", + .flags = DEBUG_OMAP4UART4_FLAGS, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 3a674de..a388f8c 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -208,17 +208,6 @@ static int __init omap_serial_early_init(void) pr_info("%s used as console in debug mode: uart%d clocks will not be gated", uart_name, uart->num); } - - /* - * omap-uart can be used for earlyprintk logs - * So if omap-uart is used as console then prevent - * uart reset and idle to get logs from omap-uart - * until uart console driver is available to take - * care for console messages. - * Idling or resetting omap-uart while printing logs - * early boot logs can stall the boot-up. - */ - oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET; } } while (1); diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index e115f67..c5be60d 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1162,9 +1162,6 @@ static void __init eva_init(void) gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ - /* Touchscreen */ - gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ - /* GETHER */ gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index d555464..3354a85 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -167,7 +167,13 @@ static const struct pinctrl_map bockw_pinctrl_map[] = { "usb1", "usb1"), /* SDHI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0", "sdhi0"), + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_cd", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_wp", "sdhi0"), }; #define FPGA 0x18200000 diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index d73e21d..8d6bd5c 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -59,7 +59,7 @@ static __initdata struct gpio_led_platform_data lager_leds_pdata = { #define GPIO_KEY(c, g, d, ...) \ { .code = c, .gpio = g, .desc = d, .active_low = 1 } -static __initdata struct gpio_keys_button gpio_buttons[] = { +static struct gpio_keys_button gpio_buttons[] = { GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"), GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"), GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"), diff --git a/arch/arm/mach-sti/headsmp.S b/arch/arm/mach-sti/headsmp.S index 78ebc75..4c09bae 100644 --- a/arch/arm/mach-sti/headsmp.S +++ b/arch/arm/mach-sti/headsmp.S @@ -16,8 +16,6 @@ #include <linux/linkage.h> #include <linux/init.h> - __INIT - /* * ST specific entry point for secondary CPUs. This provides * a "holding pen" into which all secondary cores are held until we're |
