diff options
Diffstat (limited to 'arch/arm')
102 files changed, 1298 insertions, 899 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1cacda4..a39e321 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -15,6 +15,7 @@ config ARM select GENERIC_IRQ_SHOW select GENERIC_PCI_IOMAP select GENERIC_SMP_IDLE_THREAD + select GENERIC_IDLE_POLL_SETUP select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select HARDIRQS_SW_RESEND @@ -549,6 +550,8 @@ config ARCH_IXP4XX select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI select NEED_MACH_IO_H + select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_DESC help Support for Intel's IXP4XX (XScale) family of processors. diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index cb7bcc5..39253b9 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -322,6 +322,24 @@ }; }; + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <0 0 0x1 0x0 /* PA0 periph A SPI0_MISO pin */ + 0 1 0x1 0x0 /* PA1 periph A SPI0_MOSI pin */ + 0 2 0x1 0x0>; /* PA2 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A SPI1_MISO pin */ + 1 1 0x1 0x0 /* PB1 periph A SPI1_MOSI pin */ + 1 2 0x1 0x0>; /* PB2 periph A SPI1_SPCK pin */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -471,6 +489,28 @@ status = "disabled"; }; + spi0: spi@fffc8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffc8000 0x200>; + interrupts = <12 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + spi1: spi@fffcc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffcc000 0x200>; + interrupts = <13 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; + adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 271d4de..94b58ab 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -303,6 +303,24 @@ }; }; + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <0 0 0x2 0x0 /* PA0 periph B SPI0_MISO pin */ + 0 1 0x2 0x0 /* PA1 periph B SPI0_MOSI pin */ + 0 2 0x2 0x0>; /* PA2 periph B SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <1 12 0x1 0x0 /* PB12 periph A SPI1_MISO pin */ + 1 13 0x1 0x0 /* PB13 periph A SPI1_MOSI pin */ + 1 14 0x1 0x0>; /* PB14 periph A SPI1_SPCK pin */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -462,6 +480,28 @@ reg = <0xfffffd40 0x10>; status = "disabled"; }; + + spi0: spi@fffa4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffa4000 0x200>; + interrupts = <14 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + spi1: spi@fffa8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffa8000 0x200>; + interrupts = <15 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 1eb0872..a14e424 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -79,6 +79,16 @@ }; }; }; + + spi0: spi@fffa4000 { + status = "okay"; + cs-gpios = <&pioA 5 0>, <0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index da15e83..23d1f46 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -96,6 +96,16 @@ status = "okay"; pinctrl-0 = <&pinctrl_ssc0_tx>; }; + + spi0: spi@fffc8000 { + status = "okay"; + cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <50000000>; + reg = <1>; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 6b1d4ca..cfdf429 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -322,6 +322,24 @@ }; }; + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A SPI0_MISO pin */ + 1 1 0x1 0x0 /* PB1 periph A SPI0_MOSI pin */ + 1 2 0x1 0x0>; /* PB2 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <1 14 0x1 0x0 /* PB14 periph A SPI1_MISO pin */ + 1 15 0x1 0x0 /* PB15 periph A SPI1_MOSI pin */ + 1 16 0x1 0x0>; /* PB16 periph A SPI1_SPCK pin */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -531,6 +549,28 @@ reg = <0xfffffd40 0x10>; status = "disabled"; }; + + spi0: spi@fffa4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffa4000 0x200>; + interrupts = <14 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + spi1: spi@fffa8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffa8000 0x200>; + interrupts = <15 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 20c3191..92c52a7 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -102,6 +102,16 @@ }; }; }; + + spi0: spi@fffa4000{ + status = "okay"; + cs-gpios = <&pioB 3 0>, <0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <13000000>; + reg = <0>; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 7750f98..b2961f1 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -261,6 +261,24 @@ }; }; + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ + 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ + 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ + 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ + 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -373,6 +391,28 @@ #size-cells = <0>; status = "disabled"; }; + + spi0: spi@f0000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf0000000 0x100>; + interrupts = <13 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + spi1: spi@f0004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf0004000 0x100>; + interrupts = <14 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index d400f8d..34c842b 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -67,6 +67,16 @@ }; }; }; + + spi0: spi@f0000000 { + status = "okay"; + cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index a98c0d5..347b438 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -343,6 +343,24 @@ }; }; + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ + 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ + 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ + 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ + 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -529,6 +547,28 @@ trigger-value = <0x6>; }; }; + + spi0: spi@f0000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf0000000 0x100>; + interrupts = <13 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + spi1: spi@f0004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf0004000 0x100>; + interrupts = <14 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 8a7cf1d..09f5e66 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -84,6 +84,16 @@ }; }; }; + + spi0: spi@f0000000 { + status = "okay"; + cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; }; usb0: ohci@00600000 { diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index 31f2157..67f8670 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -38,4 +38,10 @@ <0x19c00000 0x1000>; interrupts = <0 195 0x0>; }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; }; diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts index 9e621b5..c9b09a8 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -38,4 +38,10 @@ <0x16400000 0x1000>; interrupts = <0 154 0x0>; }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; }; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 1513c19..122ae94 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -89,7 +89,7 @@ pinmux: pinmux@e0700000 { compatible = "st,spear1310-pinmux"; reg = <0xe0700000 0x1000>; - #gpio-range-cells = <2>; + #gpio-range-cells = <3>; }; apb { @@ -212,7 +212,7 @@ interrupt-controller; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinmux 0 246>; + gpio-ranges = <&pinmux 0 0 246>; status = "disabled"; st-plgpio,ngpio = <246>; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 34da11a..c511c47 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -63,7 +63,7 @@ pinmux: pinmux@e0700000 { compatible = "st,spear1340-pinmux"; reg = <0xe0700000 0x1000>; - #gpio-range-cells = <2>; + #gpio-range-cells = <3>; }; pwm: pwm@e0180000 { @@ -127,7 +127,7 @@ interrupt-controller; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinmux 0 252>; + gpio-ranges = <&pinmux 0 0 252>; status = "disabled"; st-plgpio,ngpio = <250>; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index ab45b8c..9537208 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -25,7 +25,7 @@ pinmux: pinmux@b4000000 { compatible = "st,spear310-pinmux"; reg = <0xb4000000 0x1000>; - #gpio-range-cells = <2>; + #gpio-range-cells = <3>; }; fsmc: flash@44000000 { @@ -102,7 +102,7 @@ interrupt-controller; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinmux 0 102>; + gpio-ranges = <&pinmux 0 0 102>; status = "disabled"; st-plgpio,ngpio = <102>; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index caa5520..ffea342 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -24,7 +24,7 @@ pinmux: pinmux@b3000000 { compatible = "st,spear320-pinmux"; reg = <0xb3000000 0x1000>; - #gpio-range-cells = <2>; + #gpio-range-cells = <3>; }; clcd@90000000 { @@ -130,7 +130,7 @@ interrupt-controller; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinmux 0 102>; + gpio-ranges = <&pinmux 0 0 102>; status = "disabled"; st-plgpio,ngpio = <102>; diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts index 567cf4e..877b33a 100644 --- a/arch/arm/boot/dts/vt8500-bv07.dts +++ b/arch/arm/boot/dts/vt8500-bv07.dts @@ -11,26 +11,22 @@ / { model = "Benign BV07 Netbook"; +}; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <16>; /* non-standard but required */ - }; +&fb { + bits-per-pixel = <16>; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; }; }; }; diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi index cf31ced..68c8dc6 100644 --- a/arch/arm/boot/dts/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500.dtsi @@ -98,12 +98,10 @@ interrupts = <43>; }; - fb@d800e400 { + fb: fb@d8050800 { compatible = "via,vt8500-fb"; reg = <0xd800e400 0x400>; interrupts = <12>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts index fd4e248..edd2cec 100644 --- a/arch/arm/boot/dts/wm8505-ref.dts +++ b/arch/arm/boot/dts/wm8505-ref.dts @@ -11,26 +11,22 @@ / { model = "Wondermedia WM8505 Netbook"; +}; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <32>; /* non-standard but required */ - }; +&fb { + bits-per-pixel = <32>; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; }; }; }; diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index e74a1c0..bcf668d 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -128,11 +128,9 @@ interrupts = <0>; }; - fb@d8050800 { + fb: fb@d8050800 { compatible = "wm,wm8505-fb"; reg = <0xd8050800 0x200>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts index cefd938..61671a0 100644 --- a/arch/arm/boot/dts/wm8650-mid.dts +++ b/arch/arm/boot/dts/wm8650-mid.dts @@ -11,26 +11,24 @@ / { model = "Wondermedia WM8650-MID Tablet"; +}; + +&fb { + bits-per-pixel = <16>; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <16>; /* non-standard but required */ - }; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; }; }; }; + diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi index db3c0a1..9313407 100644 --- a/arch/arm/boot/dts/wm8650.dtsi +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -128,11 +128,9 @@ interrupts = <43>; }; - fb@d8050800 { + fb: fb@d8050800 { compatible = "wm,wm8505-fb"; reg = <0xd8050800 0x200>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts index fcc660c..32d2253 100644 --- a/arch/arm/boot/dts/wm8850-w70v2.dts +++ b/arch/arm/boot/dts/wm8850-w70v2.dts @@ -15,28 +15,6 @@ / { model = "Wondermedia WM8850-W70v2 Tablet"; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <16>; /* non-standard but required */ - }; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 50000 1>; /* duty inverted */ @@ -45,3 +23,21 @@ default-brightness-level = <5>; }; }; + +&fb { + bits-per-pixel = <16>; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi index e8cbfdc..7149cd1 100644 --- a/arch/arm/boot/dts/wm8850.dtsi +++ b/arch/arm/boot/dts/wm8850.dtsi @@ -135,11 +135,9 @@ }; }; - fb@d8051700 { + fb: fb@d8051700 { compatible = "wm,wm8505-fb"; reg = <0xd8051700 0x200>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index e36b010..088d6c1 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -188,6 +188,7 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_PHY=y CONFIG_USB_MXS_PHY=y CONFIG_USB_STORAGE=y CONFIG_MMC=y diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 92386b2..afa7249f 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -134,6 +134,7 @@ CONFIG_SND_DEBUG_VERBOSE=y # CONFIG_SND_SPI is not set CONFIG_SND_SOC=y CONFIG_USB=y +CONFIG_USB_PHY=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 6a99e30..87924d6 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -120,6 +120,7 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_STORAGE=y +CONFIG_USB_PHY=y CONFIG_USB_MXS_PHY=y CONFIG_MMC=y CONFIG_MMC_MXS=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 42eab9a..7e0ebb6 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -195,6 +195,7 @@ CONFIG_SND_SOC=y CONFIG_SND_OMAP_SOC=y # CONFIG_USB_HID is not set CONFIG_USB=y +CONFIG_USB_PHY=y CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index cca9f15..ea289e1 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -19,14 +19,6 @@ #undef _CACHE #undef MULTI_CACHE -#if defined(CONFIG_CPU_CACHE_V3) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE v3 -# endif -#endif - #if defined(CONFIG_CPU_CACHE_V4) # ifdef _CACHE # define MULTI_CACHE 1 diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h index 02fe2fb..ed94b1a 100644 --- a/arch/arm/include/asm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -37,7 +37,7 @@ extern int iop3xx_get_init_atu(void); * IOP3XX processor registers */ #define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000 -#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfeffe000 +#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfedfe000 #define IOP3XX_PERIPHERAL_SIZE 0x00002000 #define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\ IOP3XX_PERIPHERAL_SIZE - 1) diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 6ef8afd..86b8fe3 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -111,7 +111,7 @@ #define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */ #define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */ #define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */ -#define L_PTE_S2_RDWR (_AT(pteval_t, 2) << 6) /* HAP[2:1] */ +#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */ /* * Hyp-mode PL2 PTE definitions for LPAE. diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 80d6fc4..9bcd262 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -61,6 +61,15 @@ extern void __pgd_error(const char *file, int line, pgd_t); #define FIRST_USER_ADDRESS PAGE_SIZE /* + * Use TASK_SIZE as the ceiling argument for free_pgtables() and + * free_pgd_range() to avoid freeing the modules pmd when LPAE is enabled (pmd + * page shared between user and kernel). + */ +#ifdef CONFIG_ARM_LPAE +#define USER_PGTABLES_CEILING TASK_SIZE +#endif + +/* * The pgprot_* and protection_map entries will be fixed up in runtime * to include the cachable and bufferable bits based on memory policy, * as well as any architecture dependent bits like global/ASID and SMP diff --git a/arch/arm/include/asm/system_misc.h b/arch/arm/include/asm/system_misc.h index 5a85f14..21a23e3 100644 --- a/arch/arm/include/asm/system_misc.h +++ b/arch/arm/include/asm/system_misc.h @@ -21,9 +21,6 @@ extern void (*arm_pm_idle)(void); extern unsigned int user_debug; -extern void disable_hlt(void); -extern void enable_hlt(void); - #endif /* !__ASSEMBLY__ */ #endif /* __ASM_ARM_SYSTEM_MISC_H */ diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 9e9c041..ab865e6 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -14,7 +14,6 @@ #include <asm/glue.h> -#define TLB_V3_PAGE (1 << 0) #define TLB_V4_U_PAGE (1 << 1) #define TLB_V4_D_PAGE (1 << 2) #define TLB_V4_I_PAGE (1 << 3) @@ -22,7 +21,6 @@ #define TLB_V6_D_PAGE (1 << 5) #define TLB_V6_I_PAGE (1 << 6) -#define TLB_V3_FULL (1 << 8) #define TLB_V4_U_FULL (1 << 9) #define TLB_V4_D_FULL (1 << 10) #define TLB_V4_I_FULL (1 << 11) @@ -52,7 +50,6 @@ * ============= * * We have the following to choose from: - * v3 - ARMv3 * v4 - ARMv4 without write buffer * v4wb - ARMv4 with write buffer without I TLB flush entry instruction * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction @@ -330,7 +327,6 @@ static inline void local_flush_tlb_all(void) if (tlb_flag(TLB_WB)) dsb(); - tlb_op(TLB_V3_FULL, "c6, c0, 0", zero); tlb_op(TLB_V4_U_FULL | TLB_V6_U_FULL, "c8, c7, 0", zero); tlb_op(TLB_V4_D_FULL | TLB_V6_D_FULL, "c8, c6, 0", zero); tlb_op(TLB_V4_I_FULL | TLB_V6_I_FULL, "c8, c5, 0", zero); @@ -351,9 +347,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) if (tlb_flag(TLB_WB)) dsb(); - if (possible_tlb_flags & (TLB_V3_FULL|TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) { + if (possible_tlb_flags & (TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) { if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) { - tlb_op(TLB_V3_FULL, "c6, c0, 0", zero); tlb_op(TLB_V4_U_FULL, "c8, c7, 0", zero); tlb_op(TLB_V4_D_FULL, "c8, c6, 0", zero); tlb_op(TLB_V4_I_FULL, "c8, c5, 0", zero); @@ -385,9 +380,8 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) if (tlb_flag(TLB_WB)) dsb(); - if (possible_tlb_flags & (TLB_V3_PAGE|TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) && + if (possible_tlb_flags & (TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) && cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { - tlb_op(TLB_V3_PAGE, "c6, c0, 0", uaddr); tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", uaddr); tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", uaddr); tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", uaddr); @@ -418,7 +412,6 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) if (tlb_flag(TLB_WB)) dsb(); - tlb_op(TLB_V3_PAGE, "c6, c0, 0", kaddr); tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", kaddr); tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", kaddr); tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", kaddr); diff --git a/arch/arm/kernel/early_printk.c b/arch/arm/kernel/early_printk.c index 85aa2b2..4307653 100644 --- a/arch/arm/kernel/early_printk.c +++ b/arch/arm/kernel/early_printk.c @@ -29,28 +29,17 @@ static void early_console_write(struct console *con, const char *s, unsigned n) early_write(s, n); } -static struct console early_console = { +static struct console early_console_dev = { .name = "earlycon", .write = early_console_write, .flags = CON_PRINTBUFFER | CON_BOOT, .index = -1, }; -asmlinkage void early_printk(const char *fmt, ...) -{ - char buf[512]; - int n; - va_list ap; - - va_start(ap, fmt); - n = vscnprintf(buf, sizeof(buf), fmt, ap); - early_write(buf, n); - va_end(ap); -} - static int __init setup_early_printk(char *buf) { - register_console(&early_console); + early_console = &early_console_dev; + register_console(&early_console_dev); return 0; } diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 5dc1aa6..1fd749e 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -1043,7 +1043,7 @@ static int dbg_cpu_pm_notify(struct notifier_block *self, unsigned long action, return NOTIFY_OK; } -static struct notifier_block __cpuinitdata dbg_cpu_pm_nb = { +static struct notifier_block dbg_cpu_pm_nb = { .notifier_call = dbg_cpu_pm_notify, }; diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 146157d..8c3094d 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -253,7 +253,10 @@ validate_event(struct pmu_hw_events *hw_events, struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct pmu *leader_pmu = event->group_leader->pmu; - if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF) + if (event->pmu != leader_pmu || event->state < PERF_EVENT_STATE_OFF) + return 1; + + if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec) return 1; return armpmu->get_event_idx(hw_events, event) >= 0; diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 047d3e4..c9a5e2c 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -57,38 +57,6 @@ static const char *isa_modes[] = { "ARM" , "Thumb" , "Jazelle", "ThumbEE" }; -static volatile int hlt_counter; - -void disable_hlt(void) -{ - hlt_counter++; -} - -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; - BUG_ON(hlt_counter < 0); -} - -EXPORT_SYMBOL(enable_hlt); - -static int __init nohlt_setup(char *__unused) -{ - hlt_counter = 1; - return 1; -} - -static int __init hlt_setup(char *__unused) -{ - hlt_counter = 0; - return 1; -} - -__setup("nohlt", nohlt_setup); -__setup("hlt", hlt_setup); - extern void call_with_stack(void (*fn)(void *), void *arg, void *sp); typedef void (*phys_reset_t)(unsigned long); @@ -172,54 +140,38 @@ static void default_idle(void) local_irq_enable(); } -/* - * The idle thread. - * We always respect 'hlt_counter' to prevent low power idle. - */ -void cpu_idle(void) +void arch_cpu_idle_prepare(void) { local_fiq_enable(); +} - /* endless idle loop with no priority at all */ - while (1) { - tick_nohz_idle_enter(); - rcu_idle_enter(); - ledtrig_cpu(CPU_LED_IDLE_START); - while (!need_resched()) { -#ifdef CONFIG_HOTPLUG_CPU - if (cpu_is_offline(smp_processor_id())) - cpu_die(); +void arch_cpu_idle_enter(void) +{ + ledtrig_cpu(CPU_LED_IDLE_START); +#ifdef CONFIG_PL310_ERRATA_769419 + wmb(); #endif +} - /* - * We need to disable interrupts here - * to ensure we don't miss a wakeup call. - */ - local_irq_disable(); -#ifdef CONFIG_PL310_ERRATA_769419 - wmb(); +void arch_cpu_idle_exit(void) +{ + ledtrig_cpu(CPU_LED_IDLE_END); +} + +#ifdef CONFIG_HOTPLUG_CPU +void arch_cpu_idle_dead(void) +{ + cpu_die(); +} #endif - if (hlt_counter) { - local_irq_enable(); - cpu_relax(); - } else if (!need_resched()) { - stop_critical_timings(); - if (cpuidle_idle_call()) - default_idle(); - start_critical_timings(); - /* - * default_idle functions must always - * return with IRQs enabled. - */ - WARN_ON(irqs_disabled()); - } else - local_irq_enable(); - } - ledtrig_cpu(CPU_LED_IDLE_END); - rcu_idle_exit(); - tick_nohz_idle_exit(); - schedule_preempt_disabled(); - } + +/* + * Called from the core idle loop. + */ +void arch_cpu_idle(void) +{ + if (cpuidle_idle_call()) + default_idle(); } static char reboot_mode = 'h'; diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index bd6f56b..59d2adb 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -45,12 +45,12 @@ static u32 notrace jiffy_sched_clock_read(void) static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read; -static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift) +static inline u64 notrace cyc_to_ns(u64 cyc, u32 mult, u32 shift) { return (cyc * mult) >> shift; } -static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask) +static unsigned long long notrace cyc_to_sched_clock(u32 cyc, u32 mask) { u64 epoch_ns; u32 epoch_cyc; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index d343a6c..234e339 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -56,7 +56,6 @@ #include <asm/virt.h> #include "atags.h" -#include "tcm.h" #if defined(CONFIG_FPE_NWFPE) || defined(CONFIG_FPE_FASTFPE) @@ -798,8 +797,6 @@ void __init setup_arch(char **cmdline_p) reserve_crashkernel(); - tcm_init(); - #ifdef CONFIG_MULTI_IRQ_HANDLER handle_arch_irq = mdesc->handle_irq; #endif diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 1f2cccc..4619177 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -336,7 +336,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void) /* * OK, it's off to the idle thread for us */ - cpu_idle(); + cpu_startup_entry(CPUHP_ONLINE); } void __init smp_cpus_done(unsigned int max_cpus) diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index 30ae6bb..f50f19e 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -17,7 +17,6 @@ #include <asm/mach/map.h> #include <asm/memory.h> #include <asm/system_info.h> -#include "tcm.h" static struct gen_pool *tcm_pool; static bool dtcm_present; diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 5a93698..c1fe498 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -201,6 +201,7 @@ int kvm_dev_ioctl_check_extension(long ext) break; case KVM_CAP_ARM_SET_DEVICE_ADDR: r = 1; + break; case KVM_CAP_NR_VCPUS: r = num_online_cpus(); break; diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index 4ea9a98..7bed755 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -79,11 +79,11 @@ static bool access_dcsw(struct kvm_vcpu *vcpu, u32 val; int cpu; - cpu = get_cpu(); - if (!p->is_write) return read_from_write_only(vcpu, p); + cpu = get_cpu(); + cpumask_setall(&vcpu->arch.require_dcache_flush); cpumask_clear_cpu(cpu, &vcpu->arch.require_dcache_flush); diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index b67cd53..44199bc 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -232,6 +232,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk), CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk), CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index d3addee..2ec5efe 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -262,6 +262,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 5dfc8fd..ccd0783 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -172,6 +172,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk), CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f0000000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi1_clk), CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 44a9a62..a200d8a 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -237,6 +237,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f0000000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi1_clk), CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index bf02471..f112895 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -6,6 +6,7 @@ config ARCH_BCM select ARM_ERRATA_764369 if SMP select ARM_GIC select CPU_V7 + select CLKSRC_OF select GENERIC_CLOCKEVENTS select GENERIC_TIME select GPIO_BCM diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm.c index f0f9aba..2595935 100644 --- a/arch/arm/mach-bcm/board_bcm.c +++ b/arch/arm/mach-bcm/board_bcm.c @@ -16,14 +16,11 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/irqchip.h> +#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -static void timer_init(void) -{ -} - static void __init board_init(void) { @@ -35,7 +32,7 @@ static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, }; DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor") .init_irq = irqchip_init, - .init_time = timer_init, + .init_time = clocksource_of_init, .init_machine = board_init, .dt_compat = bcm11351_dt_compat, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 497fcb7..d28c7fb 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -97,6 +97,19 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { static struct regulator_consumer_supply max8952_consumer = REGULATOR_SUPPLY("vdd_arm", NULL); +static struct regulator_init_data universal_max8952_reg_data = { + .constraints = { + .name = "VARM_1.2V", + .min_uV = 770000, + .max_uV = 1400000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8952_consumer, +}; + static struct max8952_platform_data universal_max8952_pdata __initdata = { .gpio_vid0 = EXYNOS4_GPX0(3), .gpio_vid1 = EXYNOS4_GPX0(4), @@ -105,19 +118,7 @@ static struct max8952_platform_data universal_max8952_pdata __initdata = { .dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */ .sync_freq = 0, /* default: fastest */ .ramp_speed = 0, /* default: fastest */ - - .reg_data = { - .constraints = { - .name = "VARM_1.2V", - .min_uV = 770000, - .max_uV = 1400000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &max8952_consumer, - }, + .reg_data = &universal_max8952_reg_data, }; static struct regulator_consumer_supply lp3974_buck1_consumer = diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index b81cc56..6af4066 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -204,9 +204,9 @@ static int exynos4210_usb_phy1_exit(struct platform_device *pdev) int s5p_usb_phy_init(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return exynos4210_usb_phy0_init(pdev); - else if (type == S5P_USB_PHY_HOST) + else if (type == USB_PHY_TYPE_HOST) return exynos4210_usb_phy1_init(pdev); return -EINVAL; @@ -214,9 +214,9 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type) int s5p_usb_phy_exit(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return exynos4210_usb_phy0_exit(pdev); - else if (type == S5P_USB_PHY_HOST) + else if (type == USB_PHY_TYPE_HOST) return exynos4210_usb_phy1_exit(pdev); return -EINVAL; diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c index 92bbd6b..87dff4f 100644 --- a/arch/arm/mach-gemini/idle.c +++ b/arch/arm/mach-gemini/idle.c @@ -13,9 +13,11 @@ static void gemini_idle(void) * will never wakeup... Acctualy it is not very good to enable * interrupts first since scheduler can miss a tick, but there is * no other way around this. Platforms that needs it for power saving - * should call enable_hlt() in init code, since by default it is + * should enable it in init code, since by default it is * disabled. */ + + /* FIXME: Enabling interrupts here is racy! */ local_irq_enable(); cpu_do_idle(); } diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index 020852d..6d8f6d1 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -15,6 +15,8 @@ #include <linux/stddef.h> #include <linux/list.h> #include <linux/sched.h> +#include <linux/cpu.h> + #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/system_misc.h> @@ -77,7 +79,7 @@ void __init gemini_init_irq(void) * Disable the idle handler by default since it is buggy * For more info see arch/arm/mach-gemini/idle.c */ - disable_hlt(); + cpu_idle_poll_ctrl(true); request_resource(&iomem_resource, &irq_resource); diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c index f30c528..890cae2 100644 --- a/arch/arm/mach-highbank/hotplug.c +++ b/arch/arm/mach-highbank/hotplug.c @@ -28,13 +28,11 @@ extern void secondary_startup(void); */ void __ref highbank_cpu_die(unsigned int cpu) { - flush_cache_all(); - highbank_set_cpu_jump(cpu, phys_to_virt(0)); - highbank_set_core_pwr(); - cpu_do_idle(); + flush_cache_louis(); + highbank_set_core_pwr(); - /* We should never return from idle */ - panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu); + while (1) + cpu_do_idle(); } diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c index 1ab91b5..85b728c 100644 --- a/arch/arm/mach-imx/clk-busy.c +++ b/arch/arm/mach-imx/clk-busy.c @@ -169,7 +169,7 @@ struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift, busy->mux.reg = reg; busy->mux.shift = shift; - busy->mux.width = width; + busy->mux.mask = BIT(width) - 1; busy->mux.lock = &imx_ccm_lock; busy->mux_ops = &clk_mux_ops; diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 1dbeb7c..6600cff 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -29,6 +29,7 @@ #include <linux/io.h> #include <linux/export.h> #include <linux/gpio.h> +#include <linux/cpu.h> #include <mach/udc.h> #include <mach/hardware.h> @@ -239,7 +240,7 @@ void __init ixp4xx_init_irq(void) * ixp4xx does not implement the XScale PWRMODE register * so it must not call cpu_do_idle(). */ - disable_hlt(); + cpu_idle_poll_ctrl(true); /* Route all sources to IRQ instead of FIQ */ *IXP4XX_ICLR = 0x0; diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 9f64d56..76901f4 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -223,13 +223,7 @@ static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = { }; #if defined(CONFIG_USB_EHCI_MV) -static char *pxa168_sph_clock_name[] = { - [0] = "PXA168-USBCLK", -}; - static struct mv_usb_platform_data pxa168_sph_pdata = { - .clknum = 1, - .clkname = pxa168_sph_clock_name, .mode = MV_USB_MODE_HOST, .phy_init = pxa_usb_phy_init, .phy_deinit = pxa_usb_phy_deinit, diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 22a9058..6528a5f 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -162,13 +162,7 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = { #ifdef CONFIG_USB_SUPPORT #if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O) -static char *pxa910_usb_clock_name[] = { - [0] = "U2OCLK", -}; - static struct mv_usb_platform_data ttc_usb_pdata = { - .clknum = 1, - .clkname = pxa910_usb_clock_name, .vbus = NULL, .mode = MV_USB_MODE_OTG, .otg_force_a_bus_req = 1, diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 7a7690a..db37f49 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -43,6 +43,7 @@ #include <linux/module.h> #include <linux/io.h> #include <linux/atomic.h> +#include <linux/cpu.h> #include <asm/fncpy.h> #include <asm/system_misc.h> @@ -584,8 +585,7 @@ static void omap_pm_init_proc(void) static int omap_pm_prepare(void) { /* We cannot sleep in idle until we have resumed */ - disable_hlt(); - + cpu_idle_poll_ctrl(true); return 0; } @@ -621,7 +621,7 @@ static int omap_pm_enter(suspend_state_t state) static void omap_pm_finish(void) { - enable_hlt(); + cpu_idle_poll_ctrl(false); } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index a202a47..e512253 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -138,6 +138,7 @@ #include <linux/spinlock.h> #include <linux/slab.h> #include <linux/bootmem.h> +#include <linux/cpu.h> #include <asm/system_misc.h> @@ -2157,7 +2158,7 @@ static int _enable(struct omap_hwmod *oh) if (soc_ops.enable_module) soc_ops.enable_module(oh); if (oh->flags & HWMOD_BLOCK_WFI) - disable_hlt(); + cpu_idle_poll_ctrl(true); if (soc_ops.update_context_lost) soc_ops.update_context_lost(oh); @@ -2221,7 +2222,7 @@ static int _idle(struct omap_hwmod *oh) _del_initiator_dep(oh, mpu_oh); if (oh->flags & HWMOD_BLOCK_WFI) - enable_hlt(); + cpu_idle_poll_ctrl(false); if (soc_ops.disable_module) soc_ops.disable_module(oh); @@ -2331,7 +2332,7 @@ static int _shutdown(struct omap_hwmod *oh) _del_initiator_dep(oh, mpu_oh); /* XXX what about the other system initiators here? dma, dsp */ if (oh->flags & HWMOD_BLOCK_WFI) - enable_hlt(); + cpu_idle_poll_ctrl(false); if (soc_ops.disable_module) soc_ops.disable_module(oh); _disable_clocks(oh); diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 9e05765..eaba9dc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2714,16 +2714,22 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = { { } }; -static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = { - { .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" }, -}; - /* ocp2scp_usb_phy */ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .name = "ocp2scp_usb_phy", .class = &omap44xx_ocp2scp_hwmod_class, .clkdm_name = "l3_init_clkdm", - .main_clk = "func_48m_fclk", + /* + * ocp2scp_usb_phy_phy_48m is provided by the OMAP4 PRCM IP + * block as an "optional clock," and normally should never be + * specified as the main_clk for an OMAP IP block. However it + * turns out that this clock is actually the main clock for + * the ocp2scp_usb_phy IP block: + * http://lists.infradead.org/pipermail/linux-arm-kernel/2012-September/119943.html + * So listing ocp2scp_usb_phy_phy_48m as a main_clk here seems + * to be the best workaround. + */ + .main_clk = "ocp2scp_usb_phy_phy_48m", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET, @@ -2732,8 +2738,6 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { }, }, .dev_attr = ocp2scp_dev_attr, - .opt_clks = ocp2scp_usb_phy_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks), }; /* diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 673a4c1..dec5533 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -218,7 +218,7 @@ static int omap_pm_enter(suspend_state_t suspend_state) static int omap_pm_begin(suspend_state_t state) { - disable_hlt(); + cpu_idle_poll_ctrl(true); if (cpu_is_omap34xx()) omap_prcm_irq_prepare(); return 0; @@ -226,8 +226,7 @@ static int omap_pm_begin(suspend_state_t state) static void omap_pm_end(void) { - enable_hlt(); - return; + cpu_idle_poll_ctrl(false); } static void omap_pm_finish(void) diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index 35a8014..94fbb81 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/cpu.h> #include <asm/system_misc.h> #include <asm/mach/arch.h> #include <mach/orion5x.h> @@ -52,7 +53,7 @@ static void __init orion5x_dt_init(void) */ if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) { printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); - disable_hlt(); + cpu_idle_poll_ctrl(true); } if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2")) diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index d068f14..ad71c8a 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -293,7 +293,7 @@ void __init orion5x_init(void) */ if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) { printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); - disable_hlt(); + cpu_idle_poll_ctrl(true); } /* diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 04b87ec..1069b56 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -123,6 +123,11 @@ static struct clk s3c2440_clk_ac97 = { .ctrlbit = S3C2440_CLKCON_AC97, }; +#define S3C24XX_VA_UART0 (S3C_VA_UART) +#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) +#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) +#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) + static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) { unsigned long ucon0, ucon1, ucon2, divisor; diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 6bcf87f..92e6094 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -239,6 +239,11 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) /* Serial port registrations */ +#define S3C2410_PA_UART0 (S3C24XX_PA_UART) +#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) +#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) +#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) + static struct resource s3c2410_uart0_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K), [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \ diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c index c8174d9..ca960bd 100644 --- a/arch/arm/mach-s3c64xx/setup-usb-phy.c +++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c @@ -76,7 +76,7 @@ static int s3c_usb_otgphy_exit(struct platform_device *pdev) int s5p_usb_phy_init(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s3c_usb_otgphy_init(pdev); return -EINVAL; @@ -84,7 +84,7 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type) int s5p_usb_phy_exit(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s3c_usb_otgphy_exit(pdev); return -EINVAL; diff --git a/arch/arm/mach-s5pv210/setup-usb-phy.c b/arch/arm/mach-s5pv210/setup-usb-phy.c index 356a090..b2ee533 100644 --- a/arch/arm/mach-s5pv210/setup-usb-phy.c +++ b/arch/arm/mach-s5pv210/setup-usb-phy.c @@ -80,7 +80,7 @@ static int s5pv210_usb_otgphy_exit(struct platform_device *pdev) int s5p_usb_phy_init(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s5pv210_usb_otgphy_init(pdev); return -EINVAL; @@ -88,7 +88,7 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type) int s5p_usb_phy_exit(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s5pv210_usb_otgphy_exit(pdev); return -EINVAL; diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index b63dec8..1535557 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -10,6 +10,7 @@ #include <linux/sched.h> #include <linux/serial_8250.h> #include <linux/io.h> +#include <linux/cpu.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -130,7 +131,7 @@ static void __init shark_timer_init(void) static void shark_init_early(void) { - disable_hlt(); + cpu_idle_poll_ctrl(true); } MACHINE_START(SHARK, "Shark") diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index f2ec077..ff8b7ba 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -169,7 +169,7 @@ static int usbhsf_get_id(struct platform_device *pdev) return USBHS_GADGET; } -static void usbhsf_power_ctrl(struct platform_device *pdev, +static int usbhsf_power_ctrl(struct platform_device *pdev, void __iomem *base, int enable) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); @@ -223,6 +223,8 @@ static void usbhsf_power_ctrl(struct platform_device *pdev, clk_disable(priv->pci); /* usb work around */ clk_disable(priv->usb24); /* usb work around */ } + + return 0; } static int usbhsf_get_vbus(struct platform_device *pdev) @@ -239,7 +241,7 @@ static irqreturn_t usbhsf_interrupt(int irq, void *data) return IRQ_HANDLED; } -static void usbhsf_hardware_exit(struct platform_device *pdev) +static int usbhsf_hardware_exit(struct platform_device *pdev) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); @@ -264,6 +266,8 @@ static void usbhsf_hardware_exit(struct platform_device *pdev) priv->usbh_base = NULL; free_irq(IRQ7, pdev); + + return 0; } static int usbhsf_hardware_init(struct platform_device *pdev) diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 7f3a6b7..a385f57 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -155,12 +155,14 @@ static int usbhs_get_vbus(struct platform_device *pdev) return !((1 << 7) & __raw_readw(priv->cr2)); } -static void usbhs_phy_reset(struct platform_device *pdev) +static int usbhs_phy_reset(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); /* init phy */ __raw_writew(0x8a0a, priv->cr2); + + return 0; } static int usbhs_get_id(struct platform_device *pdev) @@ -202,7 +204,7 @@ static int usbhs_hardware_init(struct platform_device *pdev) return 0; } -static void usbhs_hardware_exit(struct platform_device *pdev) +static int usbhs_hardware_exit(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); @@ -210,6 +212,8 @@ static void usbhs_hardware_exit(struct platform_device *pdev) __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy); free_irq(IRQ15, pdev); + + return 0; } static u32 usbhs_pipe_cfg[] = { diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index db968a5..979237c 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -596,12 +596,14 @@ static int usbhs_get_vbus(struct platform_device *pdev) return usbhs_is_connected(usbhs_get_priv(pdev)); } -static void usbhs_phy_reset(struct platform_device *pdev) +static int usbhs_phy_reset(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); /* init phy */ __raw_writew(0x8a0a, priv->usbcrcaddr); + + return 0; } static int usbhs0_get_id(struct platform_device *pdev) @@ -628,11 +630,13 @@ static int usbhs0_hardware_init(struct platform_device *pdev) return 0; } -static void usbhs0_hardware_exit(struct platform_device *pdev) +static int usbhs0_hardware_exit(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); cancel_delayed_work_sync(&priv->work); + + return 0; } static struct usbhs_private usbhs0_private = { @@ -735,7 +739,7 @@ static int usbhs1_hardware_init(struct platform_device *pdev) return 0; } -static void usbhs1_hardware_exit(struct platform_device *pdev) +static int usbhs1_hardware_exit(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); @@ -743,6 +747,8 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); free_irq(IRQ8, pdev); + + return 0; } static int usbhs1_get_id(struct platform_device *pdev) diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c index 47d83f7..5d92b5d 100644 --- a/arch/arm/mach-shmobile/suspend.c +++ b/arch/arm/mach-shmobile/suspend.c @@ -12,6 +12,8 @@ #include <linux/suspend.h> #include <linux/module.h> #include <linux/err.h> +#include <linux/cpu.h> + #include <asm/io.h> #include <asm/system_misc.h> @@ -23,13 +25,13 @@ static int shmobile_suspend_default_enter(suspend_state_t suspend_state) static int shmobile_suspend_begin(suspend_state_t state) { - disable_hlt(); + cpu_idle_poll_ctrl(true); return 0; } static void shmobile_suspend_end(void) { - enable_hlt(); + cpu_idle_poll_ctrl(false); } struct platform_suspend_ops shmobile_suspend_ops = { diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index d1c4893..dbc653e 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -18,8 +18,8 @@ config ARCH_TEGRA_2x_SOC select PL310_ERRATA_727915 if CACHE_L2X0 select PL310_ERRATA_769419 if CACHE_L2X0 select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB - select USB_ULPI_VIEWPORT if USB_SUPPORT + select USB_ULPI if USB_PHY + select USB_ULPI_VIEWPORT if USB_PHY help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller @@ -37,8 +37,8 @@ config ARCH_TEGRA_3x_SOC select PINCTRL_TEGRA30 select PL310_ERRATA_769419 if CACHE_L2X0 select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB - select USB_ULPI_VIEWPORT if USB_SUPPORT + select USB_ULPI if USB_PHY + select USB_ULPI_VIEWPORT if USB_PHY help Support for NVIDIA Tegra T30 processor family, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 2a17bc5..ff3c9f0 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -5,6 +5,7 @@ * * Authors: Sundar Iyer <sundar.iyer@stericsson.com> * Bengt Jonsson <bengt.g.jonsson@stericsson.com> + * Daniel Willerud <daniel.willerud@stericsson.com> * * MOP500 board specific initialization for regulators */ @@ -12,6 +13,7 @@ #include <linux/regulator/machine.h> #include <linux/regulator/ab8500.h> #include "board-mop500-regulators.h" +#include "id.h" static struct regulator_consumer_supply gpio_en_3v3_consumers[] = { REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), @@ -53,21 +55,37 @@ struct regulator_init_data tps61052_regulator = { }; static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { - /* External displays, connector on board 2v5 power supply */ - REGULATOR_SUPPLY("vaux12v5", "mcde.0"), + /* Main display, u8500 R3 uib */ + REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"), + /* Main display, u8500 uib and ST uib */ + REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"), + /* Secondary display, ST uib */ + REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"), /* SFH7741 proximity sensor */ REGULATOR_SUPPLY("vcc", "gpio-keys.0"), /* BH1780GLS ambient light sensor */ REGULATOR_SUPPLY("vcc", "2-0029"), /* lsm303dlh accelerometer */ - REGULATOR_SUPPLY("vdd", "3-0018"), + REGULATOR_SUPPLY("vdd", "2-0018"), + /* lsm303dlhc accelerometer */ + REGULATOR_SUPPLY("vdd", "2-0019"), /* lsm303dlh magnetometer */ - REGULATOR_SUPPLY("vdd", "3-001e"), + REGULATOR_SUPPLY("vdd", "2-001e"), /* Rohm BU21013 Touchscreen devices */ REGULATOR_SUPPLY("avdd", "3-005c"), REGULATOR_SUPPLY("avdd", "3-005d"), /* Synaptics RMI4 Touchscreen device */ REGULATOR_SUPPLY("vdd", "3-004b"), + /* L3G4200D Gyroscope device */ + REGULATOR_SUPPLY("vdd", "2-0068"), + /* Ambient light sensor device */ + REGULATOR_SUPPLY("vdd", "3-0029"), + /* Pressure sensor device */ + REGULATOR_SUPPLY("vdd", "2-005c"), + /* Cypress TrueTouch Touchscreen device */ + REGULATOR_SUPPLY("vcpin", "spi8.0"), + /* Camera device */ + REGULATOR_SUPPLY("vaux12v5", "mmio_camera"), }; static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { @@ -75,18 +93,50 @@ static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { REGULATOR_SUPPLY("vmmc", "sdi4"), /* AB8500 audio codec */ REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"), + /* AB8500 accessory detect 1 */ + REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"), + /* AB8500 Tv-out device */ + REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"), + /* AV8100 HDMI device */ + REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"), }; static struct regulator_consumer_supply ab8500_vaux3_consumers[] = { + REGULATOR_SUPPLY("v-SD-STM", "stm"), /* External MMC slot power */ REGULATOR_SUPPLY("vmmc", "sdi0"), }; +static struct regulator_consumer_supply ab8505_vaux4_consumers[] = { +}; + +static struct regulator_consumer_supply ab8505_vaux5_consumers[] = { +}; + +static struct regulator_consumer_supply ab8505_vaux6_consumers[] = { +}; + +static struct regulator_consumer_supply ab8505_vaux8_consumers[] = { + /* AB8500 audio codec device */ + REGULATOR_SUPPLY("v-aux8", NULL), +}; + +static struct regulator_consumer_supply ab8505_vadc_consumers[] = { + /* Internal general-purpose ADC */ + REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), + /* ADC for charger */ + REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), +}; + static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { /* TV-out DENC supply */ REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"), /* Internal general-purpose ADC */ REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), + /* ADC for charger */ + REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), + /* AB8500 Tv-out device */ + REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"), }; static struct regulator_consumer_supply ab8500_vaud_consumers[] = { @@ -114,77 +164,90 @@ static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { REGULATOR_SUPPLY("v-intcore", NULL), /* USB Transceiver */ REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"), + /* Handled by abx500 clk driver */ + REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"), +}; + +static struct regulator_consumer_supply ab8505_usb_consumers[] = { + /* HS USB OTG physical interface */ + REGULATOR_SUPPLY("v-ape", NULL), }; static struct regulator_consumer_supply ab8500_vana_consumers[] = { - /* External displays, connector on board, 1v8 power supply */ - REGULATOR_SUPPLY("vsmps2", "mcde.0"), + /* DB8500 DSI */ + REGULATOR_SUPPLY("vdddsi1v2", "mcde"), + REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"), + REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"), + /* DB8500 CSI */ + REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"), }; /* ab8500 regulator register initialization */ -struct ab8500_regulator_reg_init -ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { +static struct ab8500_regulator_reg_init ab8500_reg_init[] = { /* * VanaRequestCtrl = HP/LP depending on VxRequest * VextSupply1RequestCtrl = HP/LP depending on VxRequest */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00), /* * VextSupply2RequestCtrl = HP/LP depending on VxRequest * VextSupply3RequestCtrl = HP/LP depending on VxRequest * Vaux1RequestCtrl = HP/LP depending on VxRequest * Vaux2RequestCtrl = HP/LP depending on VxRequest */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00), /* * Vaux3RequestCtrl = HP/LP depending on VxRequest * SwHPReq = Control through SWValid disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00), /* * VanaSysClkReq1HPValid = disabled * Vaux1SysClkReq1HPValid = disabled * Vaux2SysClkReq1HPValid = disabled * Vaux3SysClkReq1HPValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), /* * VextSupply1SysClkReq1HPValid = disabled * VextSupply2SysClkReq1HPValid = disabled * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40), /* * VanaHwHPReq1Valid = disabled * Vaux1HwHPreq1Valid = disabled * Vaux2HwHPReq1Valid = disabled * Vaux3HwHPReqValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00), /* * VextSupply1HwHPReq1Valid = disabled * VextSupply2HwHPReq1Valid = disabled * VextSupply3HwHPReq1Valid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00), /* * VanaHwHPReq2Valid = disabled * Vaux1HwHPReq2Valid = disabled * Vaux2HwHPReq2Valid = disabled * Vaux3HwHPReq2Valid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00), /* * VextSupply1HwHPReq2Valid = disabled * VextSupply2HwHPReq2Valid = disabled * VextSupply3HwHPReq2Valid = HWReq2 controlled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04), /* * VanaSwHPReqValid = disabled * Vaux1SwHPReqValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00), /* * Vaux2SwHPReqValid = disabled * Vaux3SwHPReqValid = disabled @@ -192,7 +255,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * VextSupply2SwHPReqValid = disabled * VextSupply3SwHPReqValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00), /* * SysClkReq2Valid1 = SysClkReq2 controlled * SysClkReq3Valid1 = disabled @@ -202,7 +265,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * SysClkReq7Valid1 = disabled * SysClkReq8Valid1 = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a), /* * SysClkReq2Valid2 = disabled * SysClkReq3Valid2 = disabled @@ -212,7 +275,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * SysClkReq7Valid2 = disabled * SysClkReq8Valid2 = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20), /* * VTVoutEna = disabled * Vintcore12Ena = disabled @@ -220,66 +283,62 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * Vintcore12LP = inactive (HP) * VTVoutLP = inactive (HP) */ - INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10), + INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10), /* * VaudioEna = disabled * VdmicEna = disabled * Vamic1Ena = disabled * Vamic2Ena = disabled */ - INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00), /* * Vamic1_dzout = high-Z when Vamic1 is disabled * Vamic2_dzout = high-Z when Vamic2 is disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00), /* - * VPll = Hw controlled + * VPll = Hw controlled (NOTE! PRCMU bits) * VanaRegu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02), + INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02), /* * VrefDDREna = disabled * VrefDDRSleepMode = inactive (no pulldown) */ - INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00), /* - * VextSupply1Regu = HW control - * VextSupply2Regu = HW control - * VextSupply3Regu = HW control + * VextSupply1Regu = force LP + * VextSupply2Regu = force OFF + * VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP) * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 */ - INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a), + INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13), /* * Vaux1Regu = force HP * Vaux2Regu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01), + INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01), /* - * Vaux3regu = force off + * Vaux3Regu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00), /* - * Vsmps1 = 1.15V + * Vaux1Sel = 2.8 V */ - INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24), - /* - * Vaux1Sel = 2.5 V - */ - INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08), + INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C), /* * Vaux2Sel = 2.9 V */ - INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d), + INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d), /* * Vaux3Sel = 2.91 V */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07), + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07), /* * VextSupply12LP = disabled (no LP) */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00), /* * Vaux1Disch = short discharge time * Vaux2Disch = short discharge time @@ -288,33 +347,26 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * VTVoutDisch = short discharge time * VaudioDisch = short discharge time */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00), /* * VanaDisch = short discharge time * VdmicPullDownEna = pulldown disabled when Vdmic is disabled * VdmicDisch = short discharge time */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00), }; /* AB8500 regulators */ -struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { +static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { /* supplies to the display/camera */ [AB8500_LDO_AUX1] = { .constraints = { .name = "V-DISPLAY", - .min_uV = 2500000, - .max_uV = 2900000, + .min_uV = 2800000, + .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, .boot_on = 1, /* display is on at boot */ - /* - * This voltage cannot be disabled right now because - * it is somehow affecting the external MMC - * functionality, though that typically will use - * AUX3. - */ - .always_on = 1, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), .consumer_supplies = ab8500_vaux1_consumers, @@ -326,7 +378,10 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .min_uV = 1100000, .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), .consumer_supplies = ab8500_vaux2_consumers, @@ -338,7 +393,10 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .min_uV = 1100000, .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), .consumer_supplies = ab8500_vaux3_consumers, @@ -392,18 +450,614 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { [AB8500_LDO_INTCORE] = { .constraints = { .name = "V-INTCORE", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .min_uV = 1250000, + .max_uV = 1350000, + .input_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE | + REGULATOR_CHANGE_DRMS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), .consumer_supplies = ab8500_vintcore_consumers, }, - /* supply for U8500 CSI/DSI, VANA LDO */ + /* supply for U8500 CSI-DSI, VANA LDO */ [AB8500_LDO_ANA] = { .constraints = { - .name = "V-CSI/DSI", + .name = "V-CSI-DSI", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), .consumer_supplies = ab8500_vana_consumers, }, }; + +/* supply for VextSupply3 */ +static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = { + /* SIM supply for 3 V SIM cards */ + REGULATOR_SUPPLY("vinvsim", "sim-detect.0"), +}; + +/* extended configuration for VextSupply2, only used for HREFP_V20 boards */ +static struct ab8500_ext_regulator_cfg ab8500_ext_supply2 = { + .hwreq = true, +}; + +/* + * AB8500 external regulators + */ +static struct regulator_init_data ab8500_ext_regulators[] = { + /* fixed Vbat supplies VSMPS1_EXT_1V8 */ + [AB8500_EXT_SUPPLY1] = { + .constraints = { + .name = "ab8500-ext-supply1", + .min_uV = 1800000, + .max_uV = 1800000, + .initial_mode = REGULATOR_MODE_IDLE, + .boot_on = 1, + .always_on = 1, + }, + }, + /* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */ + [AB8500_EXT_SUPPLY2] = { + .constraints = { + .name = "ab8500-ext-supply2", + .min_uV = 1360000, + .max_uV = 1360000, + }, + }, + /* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */ + [AB8500_EXT_SUPPLY3] = { + .constraints = { + .name = "ab8500-ext-supply3", + .min_uV = 3400000, + .max_uV = 3400000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = + ARRAY_SIZE(ab8500_ext_supply3_consumers), + .consumer_supplies = ab8500_ext_supply3_consumers, + }, +}; + +/* ab8505 regulator register initialization */ +static struct ab8500_regulator_reg_init ab8505_reg_init[] = { + /* + * VarmRequestCtrl + * VsmpsCRequestCtrl + * VsmpsARequestCtrl + * VsmpsBRequestCtrl + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL1, 0x00, 0x00), + /* + * VsafeRequestCtrl + * VpllRequestCtrl + * VanaRequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL2, 0x30, 0x00), + /* + * Vaux1RequestCtrl = HP/LP depending on VxRequest + * Vaux2RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL3, 0xf0, 0x00), + /* + * Vaux3RequestCtrl = HP/LP depending on VxRequest + * SwHPReq = Control through SWValid disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL4, 0x07, 0x00), + /* + * VsmpsASysClkReq1HPValid + * VsmpsBSysClkReq1HPValid + * VsafeSysClkReq1HPValid + * VanaSysClkReq1HPValid = disabled + * VpllSysClkReq1HPValid + * Vaux1SysClkReq1HPValid = disabled + * Vaux2SysClkReq1HPValid = disabled + * Vaux3SysClkReq1HPValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), + /* + * VsmpsCSysClkReq1HPValid + * VarmSysClkReq1HPValid + * VbbSysClkReq1HPValid + * VsmpsMSysClkReq1HPValid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID2, 0x00, 0x00), + /* + * VsmpsAHwHPReq1Valid + * VsmpsBHwHPReq1Valid + * VsafeHwHPReq1Valid + * VanaHwHPReq1Valid = disabled + * VpllHwHPReq1Valid + * Vaux1HwHPreq1Valid = disabled + * Vaux2HwHPReq1Valid = disabled + * Vaux3HwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID1, 0xe8, 0x00), + /* + * VsmpsMHwHPReq1Valid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID2, 0x00, 0x00), + /* + * VsmpsAHwHPReq2Valid + * VsmpsBHwHPReq2Valid + * VsafeHwHPReq2Valid + * VanaHwHPReq2Valid = disabled + * VpllHwHPReq2Valid + * Vaux1HwHPReq2Valid = disabled + * Vaux2HwHPReq2Valid = disabled + * Vaux3HwHPReq2Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID1, 0xe8, 0x00), + /* + * VsmpsMHwHPReq2Valid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID2, 0x00, 0x00), + /** + * VsmpsCSwHPReqValid + * VarmSwHPReqValid + * VsmpsASwHPReqValid + * VsmpsBSwHPReqValid + * VsafeSwHPReqValid + * VanaSwHPReqValid + * VanaSwHPReqValid = disabled + * VpllSwHPReqValid + * Vaux1SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID1, 0xa0, 0x00), + /* + * Vaux2SwHPReqValid = disabled + * Vaux3SwHPReqValid = disabled + * VsmpsMSwHPReqValid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID2, 0x03, 0x00), + /* + * SysClkReq2Valid1 = SysClkReq2 controlled + * SysClkReq3Valid1 = disabled + * SysClkReq4Valid1 = SysClkReq4 controlled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID1, 0x0e, 0x0a), + /* + * SysClkReq2Valid2 = disabled + * SysClkReq3Valid2 = disabled + * SysClkReq4Valid2 = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID2, 0x0e, 0x00), + /* + * Vaux4SwHPReqValid + * Vaux4HwHPReq2Valid + * Vaux4HwHPReq1Valid + * Vaux4SysClkReq1HPValid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUVAUX4REQVALID, 0x00, 0x00), + /* + * VadcEna = disabled + * VintCore12Ena = disabled + * VintCore12Sel = 1.25 V + * VintCore12LP = inactive (HP) + * VadcLP = inactive (HP) + */ + INIT_REGULATOR_REGISTER(AB8505_REGUMISC1, 0xfe, 0x10), + /* + * VaudioEna = disabled + * Vaux8Ena = disabled + * Vamic1Ena = disabled + * Vamic2Ena = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_VAUDIOSUPPLY, 0x1e, 0x00), + /* + * Vamic1_dzout = high-Z when Vamic1 is disabled + * Vamic2_dzout = high-Z when Vamic2 is disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRL1VAMIC, 0x03, 0x00), + /* + * VsmpsARegu + * VsmpsASelCtrl + * VsmpsAAutoMode + * VsmpsAPWMMode + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSAREGU, 0x00, 0x00), + /* + * VsmpsBRegu + * VsmpsBSelCtrl + * VsmpsBAutoMode + * VsmpsBPWMMode + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBREGU, 0x00, 0x00), + /* + * VsafeRegu + * VsafeSelCtrl + * VsafeAutoMode + * VsafePWMMode + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFEREGU, 0x00, 0x00), + /* + * VPll = Hw controlled (NOTE! PRCMU bits) + * VanaRegu = force off + */ + INIT_REGULATOR_REGISTER(AB8505_VPLLVANAREGU, 0x0f, 0x02), + /* + * VextSupply1Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) + * VextSupply2Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) + * VextSupply3Regu = force OFF (OTP_ExtSupply3LPnPolarity 0) + * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 + * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 + */ + INIT_REGULATOR_REGISTER(AB8505_EXTSUPPLYREGU, 0xff, 0x30), + /* + * Vaux1Regu = force HP + * Vaux2Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX12REGU, 0x0f, 0x01), + /* + * Vaux3Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3REGU, 0x03, 0x00), + /* + * VsmpsASel1 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL1, 0x00, 0x00), + /* + * VsmpsASel2 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL2, 0x00, 0x00), + /* + * VsmpsASel3 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL3, 0x00, 0x00), + /* + * VsmpsBSel1 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL1, 0x00, 0x00), + /* + * VsmpsBSel2 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL2, 0x00, 0x00), + /* + * VsmpsBSel3 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL3, 0x00, 0x00), + /* + * VsafeSel1 + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFESEL1, 0x00, 0x00), + /* + * VsafeSel2 + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFESEL2, 0x00, 0x00), + /* + * VsafeSel3 + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFESEL3, 0x00, 0x00), + /* + * Vaux1Sel = 2.8 V + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX1SEL, 0x0f, 0x0C), + /* + * Vaux2Sel = 2.9 V + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX2SEL, 0x0f, 0x0d), + /* + * Vaux3Sel = 2.91 V + */ + INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3SEL, 0x07, 0x07), + /* + * Vaux4RequestCtrl + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX4REQCTRL, 0x00, 0x00), + /* + * Vaux4Regu + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX4REGU, 0x00, 0x00), + /* + * Vaux4Sel + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX4SEL, 0x00, 0x00), + /* + * Vaux1Disch = short discharge time + * Vaux2Disch = short discharge time + * Vaux3Disch = short discharge time + * Vintcore12Disch = short discharge time + * VTVoutDisch = short discharge time + * VaudioDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH, 0xfc, 0x00), + /* + * VanaDisch = short discharge time + * Vaux8PullDownEna = pulldown disabled when Vaux8 is disabled + * Vaux8Disch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH2, 0x16, 0x00), + /* + * Vaux4Disch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH3, 0x01, 0x00), + /* + * Vaux5Sel + * Vaux5LP + * Vaux5Ena + * Vaux5Disch + * Vaux5DisSfst + * Vaux5DisPulld + */ + INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX5, 0x00, 0x00), + /* + * Vaux6Sel + * Vaux6LP + * Vaux6Ena + * Vaux6DisPulld + */ + INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX6, 0x00, 0x00), +}; + +struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = { + /* supplies to the display/camera */ + [AB8505_LDO_AUX1] = { + .constraints = { + .name = "V-DISPLAY", + .min_uV = 2800000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .boot_on = 1, /* display is on at boot */ + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), + .consumer_supplies = ab8500_vaux1_consumers, + }, + /* supplies to the on-board eMMC */ + [AB8505_LDO_AUX2] = { + .constraints = { + .name = "V-eMMC1", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), + .consumer_supplies = ab8500_vaux2_consumers, + }, + /* supply for VAUX3, supplies to SDcard slots */ + [AB8505_LDO_AUX3] = { + .constraints = { + .name = "V-MMC-SD", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), + .consumer_supplies = ab8500_vaux3_consumers, + }, + /* supply for VAUX4, supplies to NFC and standalone secure element */ + [AB8505_LDO_AUX4] = { + .constraints = { + .name = "V-NFC-SE", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux4_consumers), + .consumer_supplies = ab8505_vaux4_consumers, + }, + /* supply for VAUX5, supplies to TBD */ + [AB8505_LDO_AUX5] = { + .constraints = { + .name = "V-AUX5", + .min_uV = 1050000, + .max_uV = 2790000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux5_consumers), + .consumer_supplies = ab8505_vaux5_consumers, + }, + /* supply for VAUX6, supplies to TBD */ + [AB8505_LDO_AUX6] = { + .constraints = { + .name = "V-AUX6", + .min_uV = 1050000, + .max_uV = 2790000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux6_consumers), + .consumer_supplies = ab8505_vaux6_consumers, + }, + /* supply for gpadc, ADC LDO */ + [AB8505_LDO_ADC] = { + .constraints = { + .name = "V-ADC", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vadc_consumers), + .consumer_supplies = ab8505_vadc_consumers, + }, + /* supply for ab8500-vaudio, VAUDIO LDO */ + [AB8505_LDO_AUDIO] = { + .constraints = { + .name = "V-AUD", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), + .consumer_supplies = ab8500_vaud_consumers, + }, + /* supply for v-anamic1 VAMic1-LDO */ + [AB8505_LDO_ANAMIC1] = { + .constraints = { + .name = "V-AMIC1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), + .consumer_supplies = ab8500_vamic1_consumers, + }, + /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ + [AB8505_LDO_ANAMIC2] = { + .constraints = { + .name = "V-AMIC2", + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), + .consumer_supplies = ab8500_vamic2_consumers, + }, + /* supply for v-aux8, VAUX8 LDO */ + [AB8505_LDO_AUX8] = { + .constraints = { + .name = "V-AUX8", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux8_consumers), + .consumer_supplies = ab8505_vaux8_consumers, + }, + /* supply for v-intcore12, VINTCORE12 LDO */ + [AB8505_LDO_INTCORE] = { + .constraints = { + .name = "V-INTCORE", + .min_uV = 1250000, + .max_uV = 1350000, + .input_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE | + REGULATOR_CHANGE_DRMS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), + .consumer_supplies = ab8500_vintcore_consumers, + }, + /* supply for LDO USB */ + [AB8505_LDO_USB] = { + .constraints = { + .name = "V-USB", + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_usb_consumers), + .consumer_supplies = ab8505_usb_consumers, + }, + /* supply for U8500 CSI-DSI, VANA LDO */ + [AB8505_LDO_ANA] = { + .constraints = { + .name = "V-CSI-DSI", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), + .consumer_supplies = ab8500_vana_consumers, + }, +}; + +struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { + .reg_init = ab8500_reg_init, + .num_reg_init = ARRAY_SIZE(ab8500_reg_init), + .regulator = ab8500_regulators, + .num_regulator = ARRAY_SIZE(ab8500_regulators), + .ext_regulator = ab8500_ext_regulators, + .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators), +}; + +/* Use the AB8500 init settings for AB8505 as they are the same right now */ +struct ab8500_regulator_platform_data ab8505_regulator_plat_data = { + .reg_init = ab8505_reg_init, + .num_reg_init = ARRAY_SIZE(ab8505_reg_init), + .regulator = ab8505_regulators, + .num_regulator = ARRAY_SIZE(ab8505_regulators), +}; + +static void ab8500_modify_reg_init(int id, u8 mask, u8 value) +{ + int i; + + if (cpu_is_u8520()) { + for (i = ARRAY_SIZE(ab8505_reg_init) - 1; i >= 0; i--) { + if (ab8505_reg_init[i].id == id) { + u8 initval = ab8505_reg_init[i].value; + initval = (initval & ~mask) | (value & mask); + ab8505_reg_init[i].value = initval; + + BUG_ON(mask & ~ab8505_reg_init[i].mask); + return; + } + } + } else { + for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) { + if (ab8500_reg_init[i].id == id) { + u8 initval = ab8500_reg_init[i].value; + initval = (initval & ~mask) | (value & mask); + ab8500_reg_init[i].value = initval; + + BUG_ON(mask & ~ab8500_reg_init[i].mask); + return; + } + } + } + + BUG_ON(1); +} + +void mop500_regulator_init(void) +{ + struct regulator_init_data *regulator; + + /* + * Temporarily turn on Vaux2 on 8520 machine + */ + if (cpu_is_u8520()) { + /* Vaux2 initialized to be on */ + ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05); + } + + /* + * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for + * all HREFP_V20 boards) + */ + if (cpu_is_u8500v20()) { + /* VextSupply2RequestCtrl = HP/OFF depending on VxRequest */ + ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01); + + /* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */ + ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2, + 0x20, 0x20); + + /* VextSupply2 = force HP at initialization */ + ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04); + + /* enable VextSupply2 during platform active */ + regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; + regulator->constraints.always_on = 1; + + /* disable VextSupply2 in suspend */ + regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; + regulator->constraints.state_mem.disabled = 1; + regulator->constraints.state_standby.disabled = 1; + + /* enable VextSupply2 HW control (used in suspend) */ + regulator->driver_data = (void *)&ab8500_ext_supply2; + } +} diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index 78a0642..9bece38 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -14,10 +14,11 @@ #include <linux/regulator/machine.h> #include <linux/regulator/ab8500.h> -extern struct ab8500_regulator_reg_init -ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS]; -extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS]; +extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data; +extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data; extern struct regulator_init_data tps61052_regulator; extern struct regulator_init_data gpio_en_3v3_regulator; +void mop500_regulator_init(void); + #endif diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 87d2d7b..ce67237 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -199,10 +199,7 @@ static struct platform_device snowball_sbnet_dev = { struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, - .regulator_reg_init = ab8500_regulator_reg_init, - .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init), - .regulator = ab8500_regulators, - .num_regulator = ARRAY_SIZE(ab8500_regulators), + .regulator = &ab8500_regulator_plat_data, .gpio = &ab8500_gpio_pdata, .codec = &ab8500_codec_pdata, }; diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 915683c..c5e20b5 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -21,6 +21,8 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/vexpress.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h> #include <asm/arch_timer.h> #include <asm/mach-types.h> @@ -433,7 +435,7 @@ static void __init v2m_dt_timer_init(void) { struct device_node *node = NULL; - vexpress_clk_of_init(); + of_clk_init(NULL); do { node = of_find_compatible_node(node, NULL, "arm,sp804"); @@ -441,6 +443,10 @@ static void __init v2m_dt_timer_init(void) if (node) { pr_info("Using SP804 '%s' as a clock & events source\n", node->full_name); + WARN_ON(clk_register_clkdev(of_clk_get_by_name(node, + "timclken1"), "v2m-timer0", "sp804")); + WARN_ON(clk_register_clkdev(of_clk_get_by_name(node, + "timclken2"), "v2m-timer1", "sp804")); v2m_sp804_init(of_iomap(node, 0), irq_of_parse_and_map(node, 0)); } diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index 7abdb96..e65a80a 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/cpu.h> #include <linux/mtd/physmap.h> #include <linux/mtd/mtd.h> @@ -531,7 +532,7 @@ static struct platform_device *nuc900_public_dev[] __initdata = { void __init nuc900_board_init(struct platform_device **device, int size) { - disable_hlt(); + cpu_idle_poll_ctrl(true); platform_add_devices(device, size); platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev)); spi_register_board_info(nuc900_spi_board_info, diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 025d173..4045c49 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -43,7 +43,7 @@ config CPU_ARM740T depends on !MMU select CPU_32v4T select CPU_ABRT_LV4T - select CPU_CACHE_V3 # although the core is v4t + select CPU_CACHE_V4 select CPU_CP15_MPU select CPU_PABRT_LEGACY help @@ -469,9 +469,6 @@ config CPU_PABRT_V7 bool # The cache model -config CPU_CACHE_V3 - bool - config CPU_CACHE_V4 bool diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 4e333fa..9e51be9 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_CPU_PABRT_LEGACY) += pabort-legacy.o obj-$(CONFIG_CPU_PABRT_V6) += pabort-v6.o obj-$(CONFIG_CPU_PABRT_V7) += pabort-v7.o -obj-$(CONFIG_CPU_CACHE_V3) += cache-v3.o obj-$(CONFIG_CPU_CACHE_V4) += cache-v4.o obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4wt.o obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index dd3d591..48bc3c0 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -343,6 +343,7 @@ void __init feroceon_l2_init(int __l2_wt_override) outer_cache.inv_range = feroceon_l2_inv_range; outer_cache.clean_range = feroceon_l2_clean_range; outer_cache.flush_range = feroceon_l2_flush_range; + outer_cache.inv_all = l2_inv_all; enable_l2(); diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S deleted file mode 100644 index 8a3fade..0000000 --- a/arch/arm/mm/cache-v3.S +++ /dev/null @@ -1,137 +0,0 @@ -/* - * linux/arch/arm/mm/cache-v3.S - * - * Copyright (C) 1997-2002 Russell king - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/page.h> -#include "proc-macros.S" - -/* - * flush_icache_all() - * - * Unconditionally clean and invalidate the entire icache. - */ -ENTRY(v3_flush_icache_all) - mov pc, lr -ENDPROC(v3_flush_icache_all) - -/* - * flush_user_cache_all() - * - * Invalidate all cache entries in a particular address - * space. - * - * - mm - mm_struct describing address space - */ -ENTRY(v3_flush_user_cache_all) - /* FALLTHROUGH */ -/* - * flush_kern_cache_all() - * - * Clean and invalidate the entire cache. - */ -ENTRY(v3_flush_kern_cache_all) - /* FALLTHROUGH */ - -/* - * flush_user_cache_range(start, end, flags) - * - * Invalidate a range of cache entries in the specified - * address space. - * - * - start - start address (may not be aligned) - * - end - end address (exclusive, may not be aligned) - * - flags - vma_area_struct flags describing address space - */ -ENTRY(v3_flush_user_cache_range) - mov ip, #0 - mcreq p15, 0, ip, c7, c0, 0 @ flush ID cache - mov pc, lr - -/* - * coherent_kern_range(start, end) - * - * Ensure coherency between the Icache and the Dcache in the - * region described by start. If you have non-snooping - * Harvard caches, you need to implement this function. - * - * - start - virtual start address - * - end - virtual end address - */ -ENTRY(v3_coherent_kern_range) - /* FALLTHROUGH */ - -/* - * coherent_user_range(start, end) - * - * Ensure coherency between the Icache and the Dcache in the - * region described by start. If you have non-snooping - * Harvard caches, you need to implement this function. - * - * - start - virtual start address - * - end - virtual end address - */ -ENTRY(v3_coherent_user_range) - mov r0, #0 - mov pc, lr - -/* - * flush_kern_dcache_area(void *page, size_t size) - * - * Ensure no D cache aliasing occurs, either with itself or - * the I cache - * - * - addr - kernel address - * - size - region size - */ -ENTRY(v3_flush_kern_dcache_area) - /* FALLTHROUGH */ - -/* - * dma_flush_range(start, end) - * - * Clean and invalidate the specified virtual address range. - * - * - start - virtual start address - * - end - virtual end address - */ -ENTRY(v3_dma_flush_range) - mov r0, #0 - mcr p15, 0, r0, c7, c0, 0 @ flush ID cache - mov pc, lr - -/* - * dma_unmap_area(start, size, dir) - * - start - kernel virtual start address - * - size - size of region - * - dir - DMA direction - */ -ENTRY(v3_dma_unmap_area) - teq r2, #DMA_TO_DEVICE - bne v3_dma_flush_range - /* FALLTHROUGH */ - -/* - * dma_map_area(start, size, dir) - * - start - kernel virtual start address - * - size - size of region - * - dir - DMA direction - */ -ENTRY(v3_dma_map_area) - mov pc, lr -ENDPROC(v3_dma_unmap_area) -ENDPROC(v3_dma_map_area) - - .globl v3_flush_kern_cache_louis - .equ v3_flush_kern_cache_louis, v3_flush_kern_cache_all - - __INITDATA - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions v3 diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S index 43e5d77..a7ba68f 100644 --- a/arch/arm/mm/cache-v4.S +++ b/arch/arm/mm/cache-v4.S @@ -58,7 +58,7 @@ ENTRY(v4_flush_kern_cache_all) ENTRY(v4_flush_user_cache_range) #ifdef CONFIG_CPU_CP15 mov ip, #0 - mcreq p15, 0, ip, c7, c7, 0 @ flush ID cache + mcr p15, 0, ip, c7, c7, 0 @ flush ID cache mov pc, lr #else /* FALLTHROUGH */ diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index ad722f1..9a5cdc0 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -99,6 +99,9 @@ void show_mem(unsigned int filter) printk("Mem-info:\n"); show_free_areas(filter); + if (filter & SHOW_MEM_FILTER_PAGE_COUNT) + return; + for_each_bank (i, mi) { struct membank *bank = &mi->bank[i]; unsigned int pfn1, pfn2; @@ -424,24 +427,6 @@ void __init bootmem_init(void) max_pfn = max_high - PHYS_PFN_OFFSET; } -static inline int free_area(unsigned long pfn, unsigned long end, char *s) -{ - unsigned int pages = 0, size = (end - pfn) << (PAGE_SHIFT - 10); - - for (; pfn < end; pfn++) { - struct page *page = pfn_to_page(pfn); - ClearPageReserved(page); - init_page_count(page); - __free_page(page); - pages++; - } - - if (size && s) - printk(KERN_INFO "Freeing %s memory: %dK\n", s, size); - - return pages; -} - /* * Poison init memory with an undefined instruction (ARM) or a branch to an * undefined instruction (Thumb). @@ -534,6 +519,14 @@ static void __init free_unused_memmap(struct meminfo *mi) #endif } +#ifdef CONFIG_HIGHMEM +static inline void free_area_high(unsigned long pfn, unsigned long end) +{ + for (; pfn < end; pfn++) + free_highmem_page(pfn_to_page(pfn)); +} +#endif + static void __init free_highpages(void) { #ifdef CONFIG_HIGHMEM @@ -569,8 +562,7 @@ static void __init free_highpages(void) if (res_end > end) res_end = end; if (res_start != start) - totalhigh_pages += free_area(start, res_start, - NULL); + free_area_high(start, res_start); start = res_end; if (start == end) break; @@ -578,9 +570,8 @@ static void __init free_highpages(void) /* And now free anything which remains */ if (start < end) - totalhigh_pages += free_area(start, end, NULL); + free_area_high(start, end); } - totalram_pages += totalhigh_pages; #endif } @@ -609,8 +600,7 @@ void __init mem_init(void) #ifdef CONFIG_SA1111 /* now that our DMA memory is actually so designated, we can free it */ - totalram_pages += free_area(PHYS_PFN_OFFSET, - __phys_to_pfn(__pa(swapper_pg_dir)), NULL); + free_reserved_area(__va(PHYS_PFN_OFFSET), swapper_pg_dir, 0, NULL); #endif free_highpages(); @@ -738,16 +728,12 @@ void free_initmem(void) extern char __tcm_start, __tcm_end; poison_init_mem(&__tcm_start, &__tcm_end - &__tcm_start); - totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)), - __phys_to_pfn(__pa(&__tcm_end)), - "TCM link"); + free_reserved_area(&__tcm_start, &__tcm_end, 0, "TCM link"); #endif poison_init_mem(__init_begin, __init_end - __init_begin); if (!machine_is_integrator() && !machine_is_cintegrator()) - totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)), - __phys_to_pfn(__pa(__init_end)), - "init"); + free_initmem_default(0); } #ifdef CONFIG_BLK_DEV_INITRD @@ -758,9 +744,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) { if (!keep_initrd) { poison_init_mem((void *)start, PAGE_ALIGN(end) - start); - totalram_pages += free_area(__phys_to_pfn(__pa(start)), - __phys_to_pfn(__pa(end)), - "initrd"); + free_reserved_area(start, end, 0, "initrd"); } } diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 7897894..a84ff76 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -34,6 +34,7 @@ #include <asm/mach/pci.h> #include "mm.h" +#include "tcm.h" /* * empty_zero_page is a special page that is used for @@ -1277,6 +1278,7 @@ void __init paging_init(struct machine_desc *mdesc) dma_contiguous_remap(); devicemaps_init(mdesc); kmap_init(); + tcm_init(); top_pmd = pmd_off_k(0xffff0000); diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index dc5de5d..fde2d2a 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -77,24 +77,27 @@ __arm740_setup: mcr p15, 0, r0, c6, c0 @ set area 0, default ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM - ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB) - mov r2, #10 @ 11 is the minimum (4KB) -1: add r2, r2, #1 @ area size *= 2 - mov r1, r1, lsr #1 + ldr r3, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB) + mov r4, #10 @ 11 is the minimum (4KB) +1: add r4, r4, #1 @ area size *= 2 + movs r3, r3, lsr #1 bne 1b @ count not zero r-shift - orr r0, r0, r2, lsl #1 @ the area register value + orr r0, r0, r4, lsl #1 @ the area register value orr r0, r0, #1 @ set enable bit mcr p15, 0, r0, c6, c1 @ set area 1, RAM ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH - ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB) - mov r2, #10 @ 11 is the minimum (4KB) -1: add r2, r2, #1 @ area size *= 2 - mov r1, r1, lsr #1 + ldr r3, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB) + cmp r3, #0 + moveq r0, #0 + beq 2f + mov r4, #10 @ 11 is the minimum (4KB) +1: add r4, r4, #1 @ area size *= 2 + movs r3, r3, lsr #1 bne 1b @ count not zero r-shift - orr r0, r0, r2, lsl #1 @ the area register value + orr r0, r0, r4, lsl #1 @ the area register value orr r0, r0, #1 @ set enable bit - mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH +2: mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH mov r0, #0x06 mcr p15, 0, r0, c2, c0 @ Region 1&2 cacheable @@ -137,13 +140,14 @@ __arm740_proc_info: .long 0x41807400 .long 0xfffffff0 .long 0 + .long 0 b __arm740_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT + .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_26BIT .long cpu_arm740_name .long arm740_processor_functions .long 0 .long 0 - .long v3_cache_fns @ cache model + .long v4_cache_fns @ cache model .size __arm740_proc_info, . - __arm740_proc_info diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 2c3b942..2556cf1 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -387,7 +387,7 @@ ENTRY(cpu_arm920_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm920_suspend_size .equ cpu_arm920_suspend_size, 4 * 3 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_arm920_do_suspend) stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c13, c0, 0 @ PID diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index f1803f7..344c8a5 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -402,7 +402,7 @@ ENTRY(cpu_arm926_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm926_suspend_size .equ cpu_arm926_suspend_size, 4 * 3 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_arm926_do_suspend) stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c13, c0, 0 @ PID diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 82f9cdc..0b60dd3 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -350,7 +350,7 @@ ENTRY(cpu_mohawk_set_pte_ext) .globl cpu_mohawk_suspend_size .equ cpu_mohawk_suspend_size, 4 * 6 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_mohawk_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 3aa0da1..d92dfd0 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -172,7 +172,7 @@ ENTRY(cpu_sa1100_set_pte_ext) .globl cpu_sa1100_suspend_size .equ cpu_sa1100_suspend_size, 4 * 3 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_sa1100_do_suspend) stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c3, c0, 0 @ domain ID diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index 3e6210b..054b491 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -17,7 +17,9 @@ #ifndef MULTI_CPU EXPORT_SYMBOL(cpu_dcache_clean_area); +#ifdef CONFIG_MMU EXPORT_SYMBOL(cpu_set_pte_ext); +#endif #else EXPORT_SYMBOL(processor); #endif diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index bcaaa8d..5c07ee4 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -138,7 +138,7 @@ ENTRY(cpu_v6_set_pte_ext) /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */ .globl cpu_v6_suspend_size .equ cpu_v6_suspend_size, 4 * 6 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_v6_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index eb93d64..e8efd83 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -413,7 +413,7 @@ ENTRY(cpu_xsc3_set_pte_ext) .globl cpu_xsc3_suspend_size .equ cpu_xsc3_suspend_size, 4 * 6 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_xsc3_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 2551036..e766f88 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -528,7 +528,7 @@ ENTRY(cpu_xscale_set_pte_ext) .globl cpu_xscale_suspend_size .equ cpu_xscale_suspend_size, 4 * 6 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_xscale_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode diff --git a/arch/arm/kernel/tcm.h b/arch/arm/mm/tcm.h index 8015ad4..8015ad4 100644 --- a/arch/arm/kernel/tcm.h +++ b/arch/arm/mm/tcm.h diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 51afedd..03db14d 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <linux/amba/pl330.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -1552,6 +1553,9 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; +#ifdef CONFIG_PL330_DMA + pd.filter = pl330_filter; +#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0); } @@ -1590,6 +1594,9 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio; +#ifdef CONFIG_PL330_DMA + pd.filter = pl330_filter; +#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1); } @@ -1628,6 +1635,9 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio; +#ifdef CONFIG_PL330_DMA + pd.filter = pl330_filter; +#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2); } diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index b885322..9ae5072 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -15,55 +15,7 @@ #ifndef __PLAT_S3C_FB_H #define __PLAT_S3C_FB_H __FILE__ -/* S3C_FB_MAX_WIN - * Set to the maximum number of windows that any of the supported hardware - * can use. Since the platform data uses this for an array size, having it - * set to the maximum of any version of the hardware can do is safe. - */ -#define S3C_FB_MAX_WIN (5) - -/** - * struct s3c_fb_pd_win - per window setup data - * @xres : The window X size. - * @yres : The window Y size. - * @virtual_x: The virtual X size. - * @virtual_y: The virtual Y size. - */ -struct s3c_fb_pd_win { - unsigned short default_bpp; - unsigned short max_bpp; - unsigned short xres; - unsigned short yres; - unsigned short virtual_x; - unsigned short virtual_y; -}; - -/** - * struct s3c_fb_platdata - S3C driver platform specific information - * @setup_gpio: Setup the external GPIO pins to the right state to transfer - * the data from the display system to the connected display - * device. - * @vidcon0: The base vidcon0 values to control the panel data format. - * @vidcon1: The base vidcon1 values to control the panel data output. - * @vtiming: Video timing when connected to a RGB type panel. - * @win: The setup data for each hardware window, or NULL for unused. - * @display_mode: The LCD output display mode. - * - * The platform data supplies the video driver with all the information - * it requires to work with the display(s) attached to the machine. It - * controls the initial mode, the number of display windows (0 is always - * the base framebuffer) that are initialised etc. - * - */ -struct s3c_fb_platdata { - void (*setup_gpio)(void); - - struct s3c_fb_pd_win *win[S3C_FB_MAX_WIN]; - struct fb_videomode *vtiming; - - u32 vidcon0; - u32 vidcon1; -}; +#include <linux/platform_data/video_s3c.h> /** * s3c_fb_set_platdata() - Setup the FB device with platform data. diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 29c26a8..f05f2af 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -1,281 +1 @@ -/* arch/arm/plat-samsung/include/plat/regs-serial.h - * - * From linux/include/asm-arm/hardware/serial_s3c2410.h - * - * Internal header file for Samsung S3C2410 serial ports (UART0-2) - * - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk) - * - * Adapted from: - * - * Internal header file for MX1ADS serial ports (UART1 & 2) - * - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#ifndef __ASM_ARM_REGS_SERIAL_H -#define __ASM_ARM_REGS_SERIAL_H - -#define S3C24XX_VA_UART0 (S3C_VA_UART) -#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) -#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) -#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) - -#define S3C2410_PA_UART0 (S3C24XX_PA_UART) -#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) -#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) -#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) - -#define S3C2410_URXH (0x24) -#define S3C2410_UTXH (0x20) -#define S3C2410_ULCON (0x00) -#define S3C2410_UCON (0x04) -#define S3C2410_UFCON (0x08) -#define S3C2410_UMCON (0x0C) -#define S3C2410_UBRDIV (0x28) -#define S3C2410_UTRSTAT (0x10) -#define S3C2410_UERSTAT (0x14) -#define S3C2410_UFSTAT (0x18) -#define S3C2410_UMSTAT (0x1C) - -#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3)) - -#define S3C2410_LCON_CS5 (0x0) -#define S3C2410_LCON_CS6 (0x1) -#define S3C2410_LCON_CS7 (0x2) -#define S3C2410_LCON_CS8 (0x3) -#define S3C2410_LCON_CSMASK (0x3) - -#define S3C2410_LCON_PNONE (0x0) -#define S3C2410_LCON_PEVEN (0x5 << 3) -#define S3C2410_LCON_PODD (0x4 << 3) -#define S3C2410_LCON_PMASK (0x7 << 3) - -#define S3C2410_LCON_STOPB (1<<2) -#define S3C2410_LCON_IRM (1<<6) - -#define S3C2440_UCON_CLKMASK (3<<10) -#define S3C2440_UCON_CLKSHIFT (10) -#define S3C2440_UCON_PCLK (0<<10) -#define S3C2440_UCON_UCLK (1<<10) -#define S3C2440_UCON_PCLK2 (2<<10) -#define S3C2440_UCON_FCLK (3<<10) -#define S3C2443_UCON_EPLL (3<<10) - -#define S3C6400_UCON_CLKMASK (3<<10) -#define S3C6400_UCON_CLKSHIFT (10) -#define S3C6400_UCON_PCLK (0<<10) -#define S3C6400_UCON_PCLK2 (2<<10) -#define S3C6400_UCON_UCLK0 (1<<10) -#define S3C6400_UCON_UCLK1 (3<<10) - -#define S3C2440_UCON2_FCLK_EN (1<<15) -#define S3C2440_UCON0_DIVMASK (15 << 12) -#define S3C2440_UCON1_DIVMASK (15 << 12) -#define S3C2440_UCON2_DIVMASK (7 << 12) -#define S3C2440_UCON_DIVSHIFT (12) - -#define S3C2412_UCON_CLKMASK (3<<10) -#define S3C2412_UCON_CLKSHIFT (10) -#define S3C2412_UCON_UCLK (1<<10) -#define S3C2412_UCON_USYSCLK (3<<10) -#define S3C2412_UCON_PCLK (0<<10) -#define S3C2412_UCON_PCLK2 (2<<10) - -#define S3C2410_UCON_CLKMASK (1 << 10) -#define S3C2410_UCON_CLKSHIFT (10) -#define S3C2410_UCON_UCLK (1<<10) -#define S3C2410_UCON_SBREAK (1<<4) - -#define S3C2410_UCON_TXILEVEL (1<<9) -#define S3C2410_UCON_RXILEVEL (1<<8) -#define S3C2410_UCON_TXIRQMODE (1<<2) -#define S3C2410_UCON_RXIRQMODE (1<<0) -#define S3C2410_UCON_RXFIFO_TOI (1<<7) -#define S3C2443_UCON_RXERR_IRQEN (1<<6) -#define S3C2443_UCON_LOOPBACK (1<<5) - -#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI) - -#define S3C2410_UFCON_FIFOMODE (1<<0) -#define S3C2410_UFCON_TXTRIG0 (0<<6) -#define S3C2410_UFCON_RXTRIG8 (1<<4) -#define S3C2410_UFCON_RXTRIG12 (2<<4) - -/* S3C2440 FIFO trigger levels */ -#define S3C2440_UFCON_RXTRIG1 (0<<4) -#define S3C2440_UFCON_RXTRIG8 (1<<4) -#define S3C2440_UFCON_RXTRIG16 (2<<4) -#define S3C2440_UFCON_RXTRIG32 (3<<4) - -#define S3C2440_UFCON_TXTRIG0 (0<<6) -#define S3C2440_UFCON_TXTRIG16 (1<<6) -#define S3C2440_UFCON_TXTRIG32 (2<<6) -#define S3C2440_UFCON_TXTRIG48 (3<<6) - -#define S3C2410_UFCON_RESETBOTH (3<<1) -#define S3C2410_UFCON_RESETTX (1<<2) -#define S3C2410_UFCON_RESETRX (1<<1) - -#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S3C2410_UFCON_TXTRIG0 | \ - S3C2410_UFCON_RXTRIG8 ) - -#define S3C2410_UMCOM_AFC (1<<4) -#define S3C2410_UMCOM_RTS_LOW (1<<0) - -#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */ -#define S3C2412_UMCON_AFC_56 (1<<5) -#define S3C2412_UMCON_AFC_48 (2<<5) -#define S3C2412_UMCON_AFC_40 (3<<5) -#define S3C2412_UMCON_AFC_32 (4<<5) -#define S3C2412_UMCON_AFC_24 (5<<5) -#define S3C2412_UMCON_AFC_16 (6<<5) -#define S3C2412_UMCON_AFC_8 (7<<5) - -#define S3C2410_UFSTAT_TXFULL (1<<9) -#define S3C2410_UFSTAT_RXFULL (1<<8) -#define S3C2410_UFSTAT_TXMASK (15<<4) -#define S3C2410_UFSTAT_TXSHIFT (4) -#define S3C2410_UFSTAT_RXMASK (15<<0) -#define S3C2410_UFSTAT_RXSHIFT (0) - -/* UFSTAT S3C2443 same as S3C2440 */ -#define S3C2440_UFSTAT_TXFULL (1<<14) -#define S3C2440_UFSTAT_RXFULL (1<<6) -#define S3C2440_UFSTAT_TXSHIFT (8) -#define S3C2440_UFSTAT_RXSHIFT (0) -#define S3C2440_UFSTAT_TXMASK (63<<8) -#define S3C2440_UFSTAT_RXMASK (63) - -#define S3C2410_UTRSTAT_TXE (1<<2) -#define S3C2410_UTRSTAT_TXFE (1<<1) -#define S3C2410_UTRSTAT_RXDR (1<<0) - -#define S3C2410_UERSTAT_OVERRUN (1<<0) -#define S3C2410_UERSTAT_FRAME (1<<2) -#define S3C2410_UERSTAT_BREAK (1<<3) -#define S3C2443_UERSTAT_PARITY (1<<1) - -#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \ - S3C2410_UERSTAT_FRAME | \ - S3C2410_UERSTAT_BREAK) - -#define S3C2410_UMSTAT_CTS (1<<0) -#define S3C2410_UMSTAT_DeltaCTS (1<<2) - -#define S3C2443_DIVSLOT (0x2C) - -/* S3C64XX interrupt registers. */ -#define S3C64XX_UINTP 0x30 -#define S3C64XX_UINTSP 0x34 -#define S3C64XX_UINTM 0x38 - -#define S3C64XX_UINTM_RXD (0) -#define S3C64XX_UINTM_TXD (2) -#define S3C64XX_UINTM_RXD_MSK (1 << S3C64XX_UINTM_RXD) -#define S3C64XX_UINTM_TXD_MSK (1 << S3C64XX_UINTM_TXD) - -/* Following are specific to S5PV210 */ -#define S5PV210_UCON_CLKMASK (1<<10) -#define S5PV210_UCON_CLKSHIFT (10) -#define S5PV210_UCON_PCLK (0<<10) -#define S5PV210_UCON_UCLK (1<<10) - -#define S5PV210_UFCON_TXTRIG0 (0<<8) -#define S5PV210_UFCON_TXTRIG4 (1<<8) -#define S5PV210_UFCON_TXTRIG8 (2<<8) -#define S5PV210_UFCON_TXTRIG16 (3<<8) -#define S5PV210_UFCON_TXTRIG32 (4<<8) -#define S5PV210_UFCON_TXTRIG64 (5<<8) -#define S5PV210_UFCON_TXTRIG128 (6<<8) -#define S5PV210_UFCON_TXTRIG256 (7<<8) - -#define S5PV210_UFCON_RXTRIG1 (0<<4) -#define S5PV210_UFCON_RXTRIG4 (1<<4) -#define S5PV210_UFCON_RXTRIG8 (2<<4) -#define S5PV210_UFCON_RXTRIG16 (3<<4) -#define S5PV210_UFCON_RXTRIG32 (4<<4) -#define S5PV210_UFCON_RXTRIG64 (5<<4) -#define S5PV210_UFCON_RXTRIG128 (6<<4) -#define S5PV210_UFCON_RXTRIG256 (7<<4) - -#define S5PV210_UFSTAT_TXFULL (1<<24) -#define S5PV210_UFSTAT_RXFULL (1<<8) -#define S5PV210_UFSTAT_TXMASK (255<<16) -#define S5PV210_UFSTAT_TXSHIFT (16) -#define S5PV210_UFSTAT_RXMASK (255<<0) -#define S5PV210_UFSTAT_RXSHIFT (0) - -#define S3C2410_UCON_CLKSEL0 (1 << 0) -#define S3C2410_UCON_CLKSEL1 (1 << 1) -#define S3C2410_UCON_CLKSEL2 (1 << 2) -#define S3C2410_UCON_CLKSEL3 (1 << 3) - -/* Default values for s5pv210 UCON and UFCON uart registers */ -#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -#ifndef __ASSEMBLY__ - -/* configuration structure for per-machine configurations for the - * serial port - * - * the pointer is setup by the machine specific initialisation from the - * arch/arm/mach-s3c2410/ directory. -*/ - -struct s3c2410_uartcfg { - unsigned char hwport; /* hardware port number */ - unsigned char unused; - unsigned short flags; - upf_t uart_flags; /* default uart flags */ - unsigned int clk_sel; - - unsigned int has_fracval; - - unsigned long ucon; /* value of ucon for port */ - unsigned long ulcon; /* value of ulcon for port */ - unsigned long ufcon; /* value of ufcon for port */ -}; - -/* s3c24xx_uart_devs - * - * this is exported from the core as we cannot use driver_register(), - * or platform_add_device() before the console_initcall() -*/ - -extern struct platform_device *s3c24xx_uart_devs[4]; - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARM_REGS_SERIAL_H */ - +#include <linux/serial_s3c.h> diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h index 959bcdb..ab34dfa 100644 --- a/arch/arm/plat-samsung/include/plat/usb-phy.h +++ b/arch/arm/plat-samsung/include/plat/usb-phy.h @@ -11,10 +11,7 @@ #ifndef __PLAT_SAMSUNG_USB_PHY_H #define __PLAT_SAMSUNG_USB_PHY_H __FILE__ -enum s5p_usb_phy_type { - S5P_USB_PHY_DEVICE, - S5P_USB_PHY_HOST, -}; +#include <linux/usb/samsung_usb_phy.h> extern int s5p_usb_phy_init(struct platform_device *pdev, int type); extern int s5p_usb_phy_exit(struct platform_device *pdev, int type); |
