diff options
Diffstat (limited to 'arch/arm')
423 files changed, 31673 insertions, 8948 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e02b893..8381bd7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -34,15 +34,12 @@ config SYS_SUPPORTS_APM_EMULATION config GENERIC_GPIO bool - default n config GENERIC_TIME bool - default n config GENERIC_CLOCKEVENTS bool - default n config GENERIC_CLOCKEVENTS_BROADCAST bool @@ -55,7 +52,6 @@ config MMU config NO_IOPORT bool - default n config EISA bool @@ -126,11 +122,9 @@ config RWSEM_XCHGADD_ALGORITHM config ARCH_HAS_ILOG2_U32 bool - default n config ARCH_HAS_ILOG2_U64 bool - default n config GENERIC_HWEIGHT bool @@ -253,6 +247,14 @@ config ARCH_CLPS711X help Support for Cirrus Logic 711x/721x based boards. +config ARCH_GEMINI + bool "Cortina Systems Gemini" + select CPU_FA526 + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Support for the Cortina Systems Gemini family SoCs + config ARCH_EBSA110 bool "EBSA-110" select CPU_SA110 @@ -273,17 +275,10 @@ config ARCH_EP93XX select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_HOLES_MEMORYMODEL help This enables support for the Cirrus EP93xx series of CPUs. -config ARCH_GEMINI - bool "Cortina Systems Gemini" - select CPU_FA526 - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Support for the Cortina Systems Gemini family SoCs - config ARCH_FOOTBRIDGE bool "FootBridge" select CPU_SA110 @@ -292,6 +287,17 @@ config ARCH_FOOTBRIDGE Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. +config ARCH_MXC + bool "Freescale MXC/iMX-based" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select ARCH_MTD_XIP + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK + help + Support for Freescale MXC/iMX-based family of processors + config ARCH_NETX bool "Hilscher NetX based" select CPU_ARM926T @@ -308,15 +314,6 @@ config ARCH_H720X help This enables support for systems based on the Hynix HMS720x -config ARCH_IMX - bool "IMX" - select CPU_ARM920T - select GENERIC_GPIO - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - help - Support for Motorola's i.MX family of processors (MX1, MXL). - config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU @@ -397,6 +394,7 @@ config ARCH_KIRKWOOD select CPU_FEROCEON select PCI select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION @@ -404,28 +402,6 @@ config ARCH_KIRKWOOD Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. -config ARCH_KS8695 - bool "Micrel/Kendin KS8695" - select CPU_ARM922T - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based - System-on-Chip devices. - -config ARCH_NS9XXX - bool "NetSilicon NS9xxx" - select CPU_ARM926T - select GENERIC_GPIO - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - select HAVE_CLK - help - Say Y here if you intend to run this kernel on a NetSilicon NS9xxx - System. - - <http://www.digi.com/products/microprocessors/index.jsp> - config ARCH_LOKI bool "Marvell Loki (88RC8480)" select CPU_FEROCEON @@ -440,6 +416,7 @@ config ARCH_MV78XX0 select CPU_FEROCEON select PCI select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION @@ -447,22 +424,13 @@ config ARCH_MV78XX0 Support for the following Marvell MV78xx0 series SoCs: MV781x0, MV782x0. -config ARCH_MXC - bool "Freescale MXC/iMX-based" - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - select ARCH_MTD_XIP - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Support for Freescale MXC/iMX-based family of processors - config ARCH_ORION5X bool "Marvell Orion" depends on MMU select CPU_FEROCEON select PCI select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION @@ -471,6 +439,49 @@ config ARCH_ORION5X Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), Orion-2 (5281), Orion-1-90 (6183). +config ARCH_MMP + bool "Marvell PXA168/910" + depends on MMU + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select TICK_ONESHOT + select PLAT_PXA + help + Support for Marvell's PXA168/910 processor line. + +config ARCH_KS8695 + bool "Micrel/Kendin KS8695" + select CPU_ARM922T + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based + System-on-Chip devices. + +config ARCH_NS9XXX + bool "NetSilicon NS9xxx" + select CPU_ARM926T + select GENERIC_GPIO + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select HAVE_CLK + help + Say Y here if you intend to run this kernel on a NetSilicon NS9xxx + System. + + <http://www.digi.com/products/microprocessors/index.jsp> + +config ARCH_W90X900 + bool "Nuvoton W90X900 CPU" + select CPU_ARM926T + help + Support for Nuvoton (Winbond logic dept.) ARM9 processor,You + can login www.mcuos.com or www.nuvoton.com to know more. + config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" select CPU_ARM926T @@ -486,8 +497,6 @@ config ARCH_PXA select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT @@ -495,19 +504,16 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_MMP - bool "Marvell PXA168/910" - depends on MMU - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - select COMMON_CLKDEV +config ARCH_MSM + bool "Qualcomm MSM" + select CPU_V6 select GENERIC_TIME select GENERIC_CLOCKEVENTS - select TICK_ONESHOT - select PLAT_PXA help - Support for Marvell's PXA168/910 processor line. + Support for Qualcomm MSM7K based systems. This runs on the ARM11 + apps processor of the MSM7K and depends on a shared memory + interface to the ARM9 modem processor which runs the baseband stack + and controls some vital subsystems (clock and power control, etc). config ARCH_RPC bool "RiscPC" @@ -585,6 +591,9 @@ config ARCH_DAVINCI select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select ZONE_DMA + select HAVE_IDE + select COMMON_CLKDEV + select GENERIC_ALLOCATOR help Support for TI's DaVinci platform. @@ -598,24 +607,6 @@ config ARCH_OMAP help Support for TI's OMAP platform (OMAP1 and OMAP2). -config ARCH_MSM - bool "Qualcomm MSM" - select CPU_V6 - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - help - Support for Qualcomm MSM7K based systems. This runs on the ARM11 - apps processor of the MSM7K and depends on a shared memory - interface to the ARM9 modem processor which runs the baseband stack - and controls some vital subsystems (clock and power control, etc). - -config ARCH_W90X900 - bool "Nuvoton W90X900 CPU" - select CPU_ARM926T - help - Support for Nuvoton (Winbond logic dept.) ARM9 processor,You - can login www.mcuos.com or www.nuvoton.com to know more. - endchoice source "arch/arm/mach-clps711x/Kconfig" @@ -681,8 +672,6 @@ endif source "arch/arm/mach-lh7a40x/Kconfig" -source "arch/arm/mach-imx/Kconfig" - source "arch/arm/mach-h720x/Kconfig" source "arch/arm/mach-versatile/Kconfig" @@ -740,6 +729,56 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config ARM_ERRATA_411920 + bool "ARM errata: Invalidation of the Instruction Cache operation can fail" + depends on CPU_V6 && !SMP + help + Invalidation of the Instruction Cache operation can + fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. + It does not affect the MPCore. This option enables the ARM Ltd. + recommended workaround. + +config ARM_ERRATA_430973 + bool "ARM errata: Stale prediction on replaced interworking branch" + depends on CPU_V7 + help + This option enables the workaround for the 430973 Cortex-A8 + (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb + interworking branch is replaced with another code sequence at the + same virtual address, whether due to self-modifying code or virtual + to physical address re-mapping, Cortex-A8 does not recover from the + stale interworking branch prediction. This results in Cortex-A8 + executing the new code sequence in the incorrect ARM or Thumb state. + The workaround enables the BTB/BTAC operations by setting ACTLR.IBE + and also flushes the branch target cache at every context switch. + Note that setting specific bits in the ACTLR register may not be + available in non-secure mode. + +config ARM_ERRATA_458693 + bool "ARM errata: Processor deadlock when a false hazard is created" + depends on CPU_V7 + help + This option enables the workaround for the 458693 Cortex-A8 (r2p0) + erratum. For very specific sequences of memory operations, it is + possible for a hazard condition intended for a cache line to instead + be incorrectly associated with a different cache line. This false + hazard might then cause a processor deadlock. The workaround enables + the L1 caching of the NEON accesses and disables the PLD instruction + in the ACTLR register. Note that setting specific bits in the ACTLR + register may not be available in non-secure mode. + +config ARM_ERRATA_460075 + bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" + depends on CPU_V7 + help + This option enables the workaround for the 460075 Cortex-A8 (r2p0) + erratum. Any asynchronous access to the L2 cache may encounter a + situation in which recent store transactions to the L2 cache are lost + and overwritten with stale memory contents from external memory. The + workaround disables the write-allocate mode for the L2 cache via the + ACTLR register. Note that setting specific bits in the ACTLR register + may not be available in non-secure mode. + endmenu source "arch/arm/common/Kconfig" @@ -807,8 +846,10 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" - depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP) + depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP ||ARCH_OMAP4) + depends on GENERIC_CLOCKEVENTS select USE_GENERIC_SMP_HELPERS + select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4) help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -826,6 +867,18 @@ config SMP If you don't know what to do here, say N. +config HAVE_ARM_SCU + bool + depends on SMP + help + This option enables support for the ARM system coherency unit + +config HAVE_ARM_TWD + bool + depends on SMP + help + This options enables support for the ARM timer and watchdog unit + choice prompt "Memory split" default VMSPLIT_3G @@ -864,8 +917,9 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" - depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP) + depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP || ARCH_OMAP4) default y + select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4) help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system @@ -925,10 +979,8 @@ config OABI_COMPAT UNPREDICTABLE (in fact it can be predicted that it won't work at all). If in doubt say Y. -config ARCH_FLATMEM_HAS_HOLES +config ARCH_HAS_HOLES_MEMORYMODEL bool - default y - depends on FLATMEM # Discontigmem is deprecated config ARCH_DISCONTIGMEM_ENABLE @@ -971,7 +1023,7 @@ source "mm/Kconfig" config LEDS bool "Timer and CPU usage LEDs" depends on ARCH_CDB89712 || ARCH_EBSA110 || \ - ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ + ARCH_EBSA285 || ARCH_INTEGRATOR || \ ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ @@ -1137,7 +1189,7 @@ endmenu menu "CPU Power Management" -if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA) +if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA) source "drivers/cpufreq/Kconfig" @@ -1162,15 +1214,6 @@ config CPU_FREQ_INTEGRATOR If in doubt, say Y. -config CPU_FREQ_IMX - tristate "CPUfreq driver for i.MX CPUs" - depends on ARCH_IMX && CPU_FREQ - default n - help - This enables the CPUfreq driver for i.MX CPUs. - - If in doubt, say N. - config CPU_FREQ_PXA bool depends on CPU_FREQ && ARCH_PXA && PXA25x diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e84729b..e8ab877 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -99,64 +99,69 @@ CHECKFLAGS += -D__arm__ #Default value head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o textofs-y := 0x00008000 - - machine-$(CONFIG_ARCH_RPC) := rpc - machine-$(CONFIG_ARCH_EBSA110) := ebsa110 - machine-$(CONFIG_FOOTBRIDGE) := footbridge - machine-$(CONFIG_ARCH_SHARK) := shark - machine-$(CONFIG_ARCH_SA1100) := sa1100 -ifeq ($(CONFIG_ARCH_SA1100),y) +textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory - textofs-$(CONFIG_SA1111) := 0x00208000 +ifeq ($(CONFIG_ARCH_SA1100),y) +textofs-$(CONFIG_SA1111) := 0x00208000 endif - machine-$(CONFIG_ARCH_PXA) := pxa - machine-$(CONFIG_ARCH_MMP) := mmp - plat-$(CONFIG_PLAT_PXA) := pxa - machine-$(CONFIG_ARCH_L7200) := l7200 - machine-$(CONFIG_ARCH_INTEGRATOR) := integrator - machine-$(CONFIG_ARCH_GEMINI) := gemini - textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 - machine-$(CONFIG_ARCH_CLPS711X) := clps711x - machine-$(CONFIG_ARCH_IOP32X) := iop32x - machine-$(CONFIG_ARCH_IOP33X) := iop33x - machine-$(CONFIG_ARCH_IOP13XX) := iop13xx - plat-$(CONFIG_PLAT_IOP) := iop - machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx - machine-$(CONFIG_ARCH_IXP2000) := ixp2000 - machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx - machine-$(CONFIG_ARCH_OMAP1) := omap1 - machine-$(CONFIG_ARCH_OMAP2) := omap2 - machine-$(CONFIG_ARCH_OMAP3) := omap2 - plat-$(CONFIG_ARCH_OMAP) := omap - machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 - machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 - plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c - machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 - plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c - machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x - machine-$(CONFIG_ARCH_VERSATILE) := versatile - machine-$(CONFIG_ARCH_IMX) := imx - machine-$(CONFIG_ARCH_H720X) := h720x - machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 - machine-$(CONFIG_ARCH_REALVIEW) := realview - machine-$(CONFIG_ARCH_AT91) := at91 - machine-$(CONFIG_ARCH_EP93XX) := ep93xx - machine-$(CONFIG_ARCH_PNX4008) := pnx4008 - machine-$(CONFIG_ARCH_NETX) := netx - machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx - machine-$(CONFIG_ARCH_DAVINCI) := davinci - machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood - machine-$(CONFIG_ARCH_KS8695) := ks8695 - plat-$(CONFIG_ARCH_MXC) := mxc - machine-$(CONFIG_ARCH_MX2) := mx2 - machine-$(CONFIG_ARCH_MX3) := mx3 - machine-$(CONFIG_ARCH_MX1) := mx1 - machine-$(CONFIG_ARCH_ORION5X) := orion5x - plat-$(CONFIG_PLAT_ORION) := orion - machine-$(CONFIG_ARCH_MSM) := msm - machine-$(CONFIG_ARCH_LOKI) := loki - machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 - machine-$(CONFIG_ARCH_W90X900) := w90x900 + +# Machine directory name. This list is sorted alphanumerically +# by CONFIG_* macro name. +machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 +machine-$(CONFIG_ARCH_AT91) := at91 +machine-$(CONFIG_ARCH_CLPS711X) := clps711x +machine-$(CONFIG_ARCH_DAVINCI) := davinci +machine-$(CONFIG_ARCH_EBSA110) := ebsa110 +machine-$(CONFIG_ARCH_EP93XX) := ep93xx +machine-$(CONFIG_ARCH_GEMINI) := gemini +machine-$(CONFIG_ARCH_H720X) := h720x +machine-$(CONFIG_ARCH_INTEGRATOR) := integrator +machine-$(CONFIG_ARCH_IOP13XX) := iop13xx +machine-$(CONFIG_ARCH_IOP32X) := iop32x +machine-$(CONFIG_ARCH_IOP33X) := iop33x +machine-$(CONFIG_ARCH_IXP2000) := ixp2000 +machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx +machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx +machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood +machine-$(CONFIG_ARCH_KS8695) := ks8695 +machine-$(CONFIG_ARCH_L7200) := l7200 +machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x +machine-$(CONFIG_ARCH_LOKI) := loki +machine-$(CONFIG_ARCH_MMP) := mmp +machine-$(CONFIG_ARCH_MSM) := msm +machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 +machine-$(CONFIG_ARCH_MX1) := mx1 +machine-$(CONFIG_ARCH_MX2) := mx2 +machine-$(CONFIG_ARCH_MX3) := mx3 +machine-$(CONFIG_ARCH_NETX) := netx +machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx +machine-$(CONFIG_ARCH_OMAP1) := omap1 +machine-$(CONFIG_ARCH_OMAP2) := omap2 +machine-$(CONFIG_ARCH_OMAP3) := omap2 +machine-$(CONFIG_ARCH_OMAP4) := omap2 +machine-$(CONFIG_ARCH_ORION5X) := orion5x +machine-$(CONFIG_ARCH_PNX4008) := pnx4008 +machine-$(CONFIG_ARCH_PXA) := pxa +machine-$(CONFIG_ARCH_REALVIEW) := realview +machine-$(CONFIG_ARCH_RPC) := rpc +machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 +machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 +machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 +machine-$(CONFIG_ARCH_SA1100) := sa1100 +machine-$(CONFIG_ARCH_SHARK) := shark +machine-$(CONFIG_ARCH_VERSATILE) := versatile +machine-$(CONFIG_ARCH_W90X900) := w90x900 +machine-$(CONFIG_FOOTBRIDGE) := footbridge + +# Platform directory name. This list is sorted alphanumerically +# by CONFIG_* macro name. +plat-$(CONFIG_ARCH_MXC) := mxc +plat-$(CONFIG_ARCH_OMAP) := omap +plat-$(CONFIG_PLAT_IOP) := iop +plat-$(CONFIG_PLAT_ORION) := orion +plat-$(CONFIG_PLAT_PXA) := pxa +plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c +plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index 5589444..f37afd9 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -135,6 +135,24 @@ struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id, } EXPORT_SYMBOL(clkdev_alloc); +int clk_add_alias(const char *alias, const char *alias_dev_name, char *id, + struct device *dev) +{ + struct clk *r = clk_get(dev, id); + struct clk_lookup *l; + + if (IS_ERR(r)) + return PTR_ERR(r); + + l = clkdev_alloc(r, alias, alias_dev_name); + clk_put(r); + if (!l) + return -ENODEV; + clkdev_add(l); + return 0; +} +EXPORT_SYMBOL(clk_add_alias); + /* * clkdev_drop - remove a clock dynamically allocated */ diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index c6884ba..3e1714c 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -253,9 +253,9 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base) } #ifdef CONFIG_SMP -void gic_raise_softirq(cpumask_t cpumask, unsigned int irq) +void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) { - unsigned long map = *cpus_addr(cpumask); + unsigned long map = *cpus_addr(*mask); /* this always happens on GIC0 */ writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT); diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig new file mode 100644 index 0000000..ac18662 --- /dev/null +++ b/arch/arm/configs/davinci_all_defconfig @@ -0,0 +1,1797 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc7 +# Tue May 26 07:24:28 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +CONFIG_ARCH_DAVINCI=y +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_AINTC=y + +# +# TI DaVinci Implementations +# + +# +# DaVinci Core Type +# +CONFIG_ARCH_DAVINCI_DM644x=y +CONFIG_ARCH_DAVINCI_DM355=y +CONFIG_ARCH_DAVINCI_DM646x=y + +# +# DaVinci Board Type +# +CONFIG_MACH_DAVINCI_EVM=y +CONFIG_MACH_SFFSDR=y +CONFIG_MACH_DAVINCI_DM355_EVM=y +CONFIG_MACH_DM355_LEOPARD=y +CONFIG_MACH_DAVINCI_DM6467_EVM=y +CONFIG_DAVINCI_MUX=y +CONFIG_DAVINCI_MUX_DEBUG=y +CONFIG_DAVINCI_MUX_WARNINGS=y +CONFIG_DAVINCI_RESET_CLOCKS=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_LEDS=y +# CONFIG_LEDS_CPU is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=m +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_DAVINCI=m +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=m + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_TIMINGS=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=m +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y +CONFIG_BLK_DEV_PALMCHIP_BK3710=m +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_LXT_PHY=y +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +CONFIG_LSI_ET1011C_PHY=y +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +CONFIG_TI_DAVINCI_EMAC=y +CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_XTKBD=m +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_VT_CONSOLE is not set +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_DAVINCI=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +CONFIG_GPIO_PCF857X=m + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_DAVINCI_WATCHDOG=m + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_MFD_DM355EVM_MSP is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_RADIO_ADAPTERS is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +CONFIG_SND_SOC=m +# CONFIG_SND_DAVINCI_SOC is not set +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=m +# CONFIG_HID_KYE is not set +CONFIG_HID_GYRATION=m +# CONFIG_HID_KENSINGTON is not set +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=m +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_SOC=y + +# +# DaVinci 35x and 644x USB support +# +# CONFIG_USB_MUSB_HOST is not set +CONFIG_USB_MUSB_PERIPHERAL=y +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_MUSB_PIO_ONLY=y +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_DAVINCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 3f89d5f..3fb083b 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -1,12 +1,19 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc1 -# Sat Dec 16 06:05:24 2006 +# Linux kernel version: 2.6.30-rc3 +# Tue May 19 12:26:49 2009 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y @@ -15,42 +22,54 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -58,31 +77,38 @@ CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -96,6 +122,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_FREEZER is not set # # System Type @@ -105,29 +132,40 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set CONFIG_ARCH_EP93XX=y # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # @@ -138,14 +176,24 @@ CONFIG_CRUNCH=y # # EP93xx Platforms # +# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set +CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y CONFIG_MACH_ADSSPHERE=y +CONFIG_MACH_EDB93XX=y +CONFIG_MACH_EDB9301=y CONFIG_MACH_EDB9302=y -CONFIG_MACH_EDB9302A=y +CONFIG_MACH_EDB9307=y CONFIG_MACH_EDB9312=y CONFIG_MACH_EDB9315=y -CONFIG_MACH_EDB9315A=y CONFIG_MACH_GESBC9312=y +CONFIG_MACH_MICRO9=y +CONFIG_MACH_MICRO9H=y +CONFIG_MACH_MICRO9M=y +CONFIG_MACH_MICRO9L=y CONFIG_MACH_TS72XX=y +CONFIG_EP93XX_EARLY_UART1=y +# CONFIG_EP93XX_EARLY_UART2 is not set +# CONFIG_EP93XX_EARLY_UART3 is not set # # Processor Type @@ -154,6 +202,7 @@ CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y @@ -168,34 +217,47 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set CONFIG_ARM_VIC=y +CONFIG_COMMON_CLKDEV=y # # Bus support # CONFIG_ARM_AMBA=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PREEMPT is not set CONFIG_HZ=100 -# CONFIG_AEABI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -205,6 +267,12 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -221,32 +289,31 @@ CONFIG_FPE_NWFPE_XP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set # # Power management options # # CONFIG_PM is not set -# CONFIG_APM is not set - -# -# Networking -# +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -267,6 +334,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -276,6 +344,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set @@ -289,25 +358,15 @@ CONFIG_IPV6=y # CONFIG_IPV6_SIT is not set # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -317,20 +376,28 @@ CONFIG_IPV6=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -339,41 +406,39 @@ CONFIG_IPV6=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -404,16 +469,13 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set CONFIG_MTD_ROM=y # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -431,49 +493,58 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND_TS7250=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +# CONFIG_MTD_NAND_TS7250 is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support +# LPDDR flash memory drivers # +# CONFIG_MTD_LPDDR is not set # -# Block devices +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set @@ -495,6 +566,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -502,92 +574,71 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_EP93XX_ETH=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wireless LAN (non-hamradio) +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_NET_RADIO is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -605,6 +656,7 @@ CONFIG_EP93XX_ETH=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -621,104 +673,101 @@ CONFIG_SERIAL_AMBA_PL010_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_EP93XX_WATCHDOG=y - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # -# TPM devices +# I2C Hardware Bus support # -# CONFIG_TCG_TPM is not set # -# I2C support +# I2C system bus drivers (mostly embedded / system-on-chip) # -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set # -# I2C Algorithms +# External I2C/SMBus adapter drivers # -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set # -# I2C Hardware Bus support +# Other I2C/SMBus bus drivers # -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_EEPROM_LEGACY=y +# CONFIG_DS1682 is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y CONFIG_I2C_DEBUG_CHIP=y +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# SPI support +# Memory mapped GPIO expanders: # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # -# Dallas's 1-wire bus +# I2C GPIO expanders: # -# CONFIG_W1 is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set # -# Hardware Monitoring support +# PCI GPIO expanders: # + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -732,158 +781,188 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # -# Misc devices +# Watchdog Device Drivers # -# CONFIG_TIFM_CORE is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_EP93XX_WATCHDOG=y # -# LED devices +# USB-based Watchdog Cards # -# CONFIG_NEW_LEDS is not set +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# LED drivers +# Sonics Silicon Backplane # +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y CONFIG_USB_DEBUG=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_DYNAMIC_MINORS=y -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# - -# -# USB HID Boot Protocol drivers -# - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -CONFIG_USB_RTL8150=y -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set - -# # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_EZUSB is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set @@ -895,6 +974,7 @@ CONFIG_USB_SERIAL_CONSOLE=y # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set @@ -902,16 +982,23 @@ CONFIG_USB_SERIAL_CONSOLE=y # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=y +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -920,38 +1007,34 @@ CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set - -# -# Real Time Clock -# +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -965,24 +1048,55 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers # -# CONFIG_RTC_DRV_X1205 is not set CONFIG_RTC_DRV_DS1307=y -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_M48T86=y +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# CONFIG_RTC_DRV_EP93XX=y +# CONFIG_RTC_DRV_PL030 is not set # CONFIG_RTC_DRV_PL031 is not set -# CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -991,27 +1105,31 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1032,16 +1150,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1049,33 +1164,35 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -1087,7 +1204,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1109,10 +1225,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1153,49 +1266,83 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SLAB_LEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set -CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set @@ -1204,21 +1351,115 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set # -# Cryptographic options +# Random Number Generation # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index c367ae4..0a1abb9 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc5 -# Tue Mar 3 21:45:57 2009 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 11:58:57 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -89,6 +89,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -101,6 +102,7 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set @@ -179,6 +182,7 @@ CONFIG_ARCH_KIRKWOOD=y CONFIG_MACH_DB88F6281_BP=y CONFIG_MACH_RD88F6192_NAS=y CONFIG_MACH_RD88F6281=y +CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_TS219=y CONFIG_PLAT_ORION=y @@ -217,6 +221,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -237,6 +242,7 @@ CONFIG_AEABI=y CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -249,6 +255,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -263,7 +271,9 @@ CONFIG_CMDLINE="" # # CPU Power Management # -# CONFIG_CPU_IDLE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # # Floating point emulation @@ -293,7 +303,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -324,7 +333,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -357,6 +366,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,20 +375,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set -# CONFIG_NL80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=y # @@ -513,7 +523,6 @@ CONFIG_MTD_NAND_ORION=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -592,8 +601,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -614,6 +625,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -687,6 +699,7 @@ CONFIG_SATA_MV=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -724,8 +737,10 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -763,6 +778,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -777,6 +793,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -789,10 +806,11 @@ CONFIG_WLAN_80211=y CONFIG_LIBERTAS=y # CONFIG_LIBERTAS_USB is not set CONFIG_LIBERTAS_SDIO=y +# CONFIG_LIBERTAS_SPI is not set # CONFIG_LIBERTAS_DEBUG is not set # CONFIG_LIBERTAS_THINFIRM is not set -# CONFIG_HERMES is not set # CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set @@ -800,20 +818,20 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set # CONFIG_P54_COMMON is not set # CONFIG_ATH5K is not set # CONFIG_ATH9K is not set +# CONFIG_AR9170_USB is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set -# CONFIG_IWLCORE is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWLAGN is not set -# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set +# CONFIG_HERMES is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -908,6 +926,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -982,7 +1001,6 @@ CONFIG_I2C_MV64XXX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1082,15 +1100,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1152,11 +1172,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1198,7 +1218,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1215,6 +1234,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -1245,7 +1265,11 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1255,6 +1279,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1329,7 +1357,9 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1341,6 +1371,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -1361,6 +1392,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1419,6 +1455,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1430,7 +1467,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1502,6 +1538,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1538,10 +1577,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1551,11 +1592,15 @@ CONFIG_TRACING=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1587,10 +1632,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1659,6 +1706,7 @@ CONFIG_CRYPTO_ARC4=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1667,6 +1715,7 @@ CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -1682,7 +1731,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index b069872..398274b 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -1,11 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Fri Jun 13 02:57:32 2008 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 14:22:12 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y @@ -22,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -43,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -54,32 +62,35 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -87,10 +98,9 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -98,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -127,11 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -152,28 +159,23 @@ CONFIG_ARCH_MV78XX0=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Marvell MV78xx0 Implementations # CONFIG_MACH_DB78X00_BP=y CONFIG_MACH_RD78X00_MASA=y - -# -# Boot options -# - -# -# Power management -# CONFIG_PLAT_ORION=y # @@ -199,6 +201,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set CONFIG_OUTER_CACHE=y CONFIG_CACHE_FEROCEON_L2=y +# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set # # Bus support @@ -208,6 +211,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -217,25 +222,33 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HIGHMEM=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -248,6 +261,11 @@ CONFIG_CMDLINE="" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # @@ -263,6 +281,8 @@ CONFIG_VFP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -271,10 +291,6 @@ CONFIG_BINFMT_ELF=y # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -310,7 +326,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -325,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -334,26 +351,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -368,6 +382,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -376,6 +392,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -429,9 +446,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_INTEL_VR_NOR is not set @@ -456,6 +471,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set @@ -466,6 +482,11 @@ CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -486,10 +507,20 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -547,7 +578,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -566,6 +601,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -632,11 +669,15 @@ CONFIG_SATA_MV=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -644,7 +685,26 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -654,19 +714,25 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -676,18 +742,20 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -701,6 +769,9 @@ CONFIG_NETDEV_1000=y CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -709,7 +780,10 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -786,11 +860,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -799,44 +873,63 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set -CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -848,6 +941,7 @@ CONFIG_I2C_MV64XXX=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -855,14 +949,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -877,10 +974,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -900,20 +1002,28 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -944,10 +1054,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -958,9 +1064,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -978,6 +1111,9 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -986,12 +1122,15 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -999,20 +1138,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1028,7 +1167,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1041,7 +1179,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1049,7 +1187,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1059,14 +1196,29 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1074,7 +1226,12 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1105,6 +1262,8 @@ CONFIG_RTC_DRV_RS5C372=y CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1114,18 +1273,25 @@ CONFIG_RTC_DRV_M41T80=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1134,14 +1300,25 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1151,6 +1328,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1174,15 +1356,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1202,25 +1382,27 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1301,11 +1483,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1320,22 +1507,55 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1347,17 +1567,27 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1393,6 +1623,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1422,25 +1656,32 @@ CONFIG_CRYPTO_PCBC=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mx31moboard_defconfig b/arch/arm/configs/mx21_defconfig index e90f86d..4b04290 100644 --- a/arch/arm/configs/mx31moboard_defconfig +++ b/arch/arm/configs/mx21_defconfig @@ -1,9 +1,10 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc5 -# Fri Oct 24 11:41:22 2008 +# Linux kernel version: 2.6.30-rc1 +# Tue Apr 14 16:58:09 2009 # CONFIG_ARM=y +CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y @@ -22,8 +23,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 @@ -38,48 +37,53 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y +# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -87,31 +91,21 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -119,15 +113,15 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_FREEZER is not set # # System Type @@ -137,14 +131,13 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -161,52 +154,45 @@ CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Freescale MXC Implementations # -# CONFIG_ARCH_MX2 is not set -CONFIG_ARCH_MX3=y +# CONFIG_ARCH_MX1 is not set +CONFIG_ARCH_MX2=y +# CONFIG_ARCH_MX3 is not set +CONFIG_MACH_MX21=y +# CONFIG_MACH_MX27 is not set # -# MX3 Options +# MX2 platforms: # -# CONFIG_MACH_MX31ADS is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_MX31LITE is not set -CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_MX21ADS=y # CONFIG_MXC_IRQ_PRIOR is not set +CONFIG_MXC_PWM=y # # Processor Type # CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y @@ -216,8 +202,10 @@ CONFIG_CPU_CP15_MMU=y CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set # CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -233,26 +221,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set +CONFIG_OABI_COMPAT=y CONFIG_ARCH_FLATMEM_HAS_HOLES=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -260,23 +254,32 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" +CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # # # At least one emulation must be selected # -CONFIG_VFP=y +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -290,9 +293,13 @@ CONFIG_NET=y # # Networking options # -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -300,7 +307,7 @@ CONFIG_INET=y CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set +CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set @@ -311,7 +318,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set @@ -328,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -337,7 +345,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -348,14 +358,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -369,20 +378,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" +# CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=3 # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -412,12 +421,12 @@ CONFIG_MTD_CFI_NOSWAP=y CONFIG_MTD_CFI_GEOMETRY=y # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set +CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_OTP is not set @@ -435,15 +444,15 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -455,16 +464,48 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_MXC=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -478,6 +519,7 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -488,13 +530,23 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set -CONFIG_SMC91X=y +# CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +CONFIG_CS89x0=y +CONFIG_CS89x0_NONISA_IRQ=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -503,7 +555,10 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -515,7 +570,40 @@ CONFIG_SMC91X=y # # Input device support # -# CONFIG_INPUT is not set +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set # # Hardware I/O ports @@ -526,39 +614,109 @@ CONFIG_SMC91X=y # # Character devices # -# CONFIG_VT is not set +CONFIG_VT=y +# CONFIG_CONSOLE_TRANSLATIONS is not set +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set # +# Memory mapped GPIO expanders: +# + +# # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set # # PCI GPIO expanders: @@ -567,15 +725,19 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -583,12 +745,17 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -611,50 +778,122 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_IMX=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Voltage and Current regulators -# +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y +# CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -663,8 +902,10 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y # CONFIG_VFAT_FS is not set +CONFIG_FAT_DEFAULT_CODEPAGE=437 # CONFIG_NTFS_FS is not set # @@ -672,15 +913,13 @@ CONFIG_INOTIFY_USER=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -700,6 +939,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -708,13 +948,16 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set @@ -730,15 +973,54 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -747,18 +1029,30 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set -CONFIG_FRAME_POINTER=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set # @@ -766,15 +1060,101 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -784,7 +1164,7 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index 72a8201..20ada52 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y # CONFIG_CPU_32=y CONFIG_CPU_V6=y -CONFIG_CPU_32v6K=y +# CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y CONFIG_CPU_PABRT_NOIFAR=y diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig new file mode 100644 index 0000000..28be17f --- /dev/null +++ b/arch/arm/configs/omap3_evm_defconfig @@ -0,0 +1,1528 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc5 +# Mon May 18 14:01:52 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_MCBSP is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +CONFIG_MACH_OMAP3EVM=y +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_OMAP_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +# CONFIG_MTD_ONENAND_GENERIC is not set +CONFIG_MTD_ONENAND_OMAP2=y +# CONFIG_MTD_ONENAND_OTP is not set +# CONFIG_MTD_ONENAND_2X_PROGRAM is not set +# CONFIG_MTD_ONENAND_SIM is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +CONFIG_SMC911X=y +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=y +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +# CONFIG_USB_ZERO_HNPTEST is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=m +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig new file mode 100644 index 0000000..23e43ea --- /dev/null +++ b/arch/arm/configs/omap_4430sdp_defconfig @@ -0,0 +1,866 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc7 +# Tue Jun 9 12:36:23 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set +CONFIG_ARCH_OMAP4=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_MUX is not set +# CONFIG_OMAP_MCBSP is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP_4430SDP=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_DCACHE_DISABLE=y +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_ARM_GIC=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SMP=y +CONFIG_HAVE_ARM_SCU=y +CONFIG_HAVE_ARM_TWD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_NR_CPUS=2 +# CONFIG_HOTPLUG_CPU is not set +CONFIG_LOCAL_TIMERS=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set +CONFIG_HAVE_MLOCK=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_ARM_UNWIND is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig new file mode 100644 index 0000000..213fe9c --- /dev/null +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -0,0 +1,1211 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27-rc5 +# Fri Oct 10 11:49:41 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +CONFIG_MACH_OMAP_ZOOM2=y +# CONFIG_MACH_OVERO is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 020e6a8..9e23852 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Fri Aug 22 12:38:51 2008 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 14:07:25 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -44,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -55,48 +62,45 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set CONFIG_KRETPROBES=y -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -104,11 +108,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -124,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -134,10 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -158,14 +159,17 @@ CONFIG_CLASSIC_RCU=y CONFIG_ARCH_ORION5X=y # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Orion Implementations @@ -175,6 +179,7 @@ CONFIG_MACH_RD88F5182=y CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y CONFIG_MACH_TS209=y +CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y CONFIG_MACH_LINKSTATION_MINI=y CONFIG_MACH_TS409=y @@ -187,14 +192,6 @@ CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y CONFIG_MACH_RD88F5181L_FXO=y CONFIG_MACH_RD88F6183AP_GE=y - -# -# Boot options -# - -# -# Power management -# CONFIG_PLAT_ORION=y # @@ -228,6 +225,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -237,25 +236,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y @@ -270,6 +276,11 @@ CONFIG_CMDLINE="" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # @@ -285,13 +296,18 @@ CONFIG_VFP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -328,7 +344,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -343,6 +359,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +CONFIG_NET_DSA=y +CONFIG_NET_DSA_TAG_DSA=y +CONFIG_NET_DSA_TAG_EDSA=y +# CONFIG_NET_DSA_TAG_TRAILER is not set +CONFIG_NET_DSA_MV88E6XXX=y +# CONFIG_NET_DSA_MV88E6060 is not set +CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y +CONFIG_NET_DSA_MV88E6131=y +CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -352,27 +377,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -397,6 +424,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -450,9 +478,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_INTEL_VR_NOR is not set @@ -477,6 +503,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set @@ -487,6 +514,11 @@ CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -507,11 +539,20 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -569,7 +610,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -589,6 +634,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -663,6 +709,7 @@ CONFIG_SATA_MV=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -670,7 +717,26 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -680,19 +746,25 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -702,10 +774,12 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -713,6 +787,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -727,6 +802,8 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -735,7 +812,10 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -819,11 +899,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_TIMERIOMEM=m # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -886,12 +967,9 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -911,14 +989,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -933,10 +1014,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -956,12 +1042,14 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -970,9 +1058,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -1013,9 +1104,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1030,10 +1148,13 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1042,12 +1163,15 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1055,20 +1179,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1076,7 +1200,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1097,6 +1220,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1104,7 +1228,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1114,8 +1237,18 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1124,7 +1257,10 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1132,7 +1268,12 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1164,6 +1305,7 @@ CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1173,12 +1315,15 @@ CONFIG_RTC_DRV_S35390A=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_M48T86=y +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1196,16 +1341,12 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set - -# -# Voltage and Current regulators -# +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1214,14 +1355,25 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1231,6 +1383,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1254,15 +1411,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1282,6 +1437,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1290,6 +1446,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1381,13 +1538,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1411,25 +1571,46 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1441,18 +1622,27 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_ASYNC_CORE=y CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1521,18 +1711,24 @@ CONFIG_CRYPTO_PCBC=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1540,7 +1736,7 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index 593102da..eb2cb31 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5" +CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 30f463d..6ab5dd5 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_PXA=y # # Floating point emulation diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 6116e48..15f8a09 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -114,3 +114,16 @@ .align 3; \ .long 9999b,9001f; \ .previous + +/* + * SMP data memory barrier + */ + .macro smp_dmb +#ifdef CONFIG_SMP +#if __LINUX_ARM_ARCH__ >= 7 + dmb +#elif __LINUX_ARM_ARCH__ == 6 + mcr p15, 0, r0, c7, c10, 5 @ dmb +#endif +#endif + .endm diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index ee99723..16b52f3 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -44,11 +44,29 @@ static inline void atomic_set(atomic_t *v, int i) : "cc"); } +static inline void atomic_add(int i, atomic_t *v) +{ + unsigned long tmp; + int result; + + __asm__ __volatile__("@ atomic_add\n" +"1: ldrex %0, [%2]\n" +" add %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (result), "=&r" (tmp) + : "r" (&v->counter), "Ir" (i) + : "cc"); +} + static inline int atomic_add_return(int i, atomic_t *v) { unsigned long tmp; int result; + smp_mb(); + __asm__ __volatile__("@ atomic_add_return\n" "1: ldrex %0, [%2]\n" " add %0, %0, %3\n" @@ -59,14 +77,34 @@ static inline int atomic_add_return(int i, atomic_t *v) : "r" (&v->counter), "Ir" (i) : "cc"); + smp_mb(); + return result; } +static inline void atomic_sub(int i, atomic_t *v) +{ + unsigned long tmp; + int result; + + __asm__ __volatile__("@ atomic_sub\n" +"1: ldrex %0, [%2]\n" +" sub %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (result), "=&r" (tmp) + : "r" (&v->counter), "Ir" (i) + : "cc"); +} + static inline int atomic_sub_return(int i, atomic_t *v) { unsigned long tmp; int result; + smp_mb(); + __asm__ __volatile__("@ atomic_sub_return\n" "1: ldrex %0, [%2]\n" " sub %0, %0, %3\n" @@ -77,6 +115,8 @@ static inline int atomic_sub_return(int i, atomic_t *v) : "r" (&v->counter), "Ir" (i) : "cc"); + smp_mb(); + return result; } @@ -84,6 +124,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) { unsigned long oldval, res; + smp_mb(); + do { __asm__ __volatile__("@ atomic_cmpxchg\n" "ldrex %1, [%2]\n" @@ -95,6 +137,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) : "cc"); } while (res); + smp_mb(); + return oldval; } @@ -135,6 +179,7 @@ static inline int atomic_add_return(int i, atomic_t *v) return val; } +#define atomic_add(i, v) (void) atomic_add_return(i, v) static inline int atomic_sub_return(int i, atomic_t *v) { @@ -148,6 +193,7 @@ static inline int atomic_sub_return(int i, atomic_t *v) return val; } +#define atomic_sub(i, v) (void) atomic_sub_return(i, v) static inline int atomic_cmpxchg(atomic_t *v, int old, int new) { @@ -187,10 +233,8 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) } #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) -#define atomic_add(i, v) (void) atomic_add_return(i, v) -#define atomic_inc(v) (void) atomic_add_return(1, v) -#define atomic_sub(i, v) (void) atomic_sub_return(i, v) -#define atomic_dec(v) (void) atomic_sub_return(1, v) +#define atomic_inc(v) atomic_add(1, v) +#define atomic_dec(v) atomic_sub(1, v) #define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0) #define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0) @@ -200,11 +244,10 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) #define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0) -/* Atomic operations are already serializing on ARM */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() +#define smp_mb__before_atomic_dec() smp_mb() +#define smp_mb__after_atomic_dec() smp_mb() +#define smp_mb__before_atomic_inc() smp_mb() +#define smp_mb__after_atomic_inc() smp_mb() #include <asm-generic/atomic.h> #endif diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index d7da19b..c207504 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t; #define EF_ARM_HASENTRY 0x00000002 /* All */ #define EF_ARM_RELEXEC 0x00000001 /* All */ -#define R_ARM_NONE 0 -#define R_ARM_PC24 1 -#define R_ARM_ABS32 2 -#define R_ARM_CALL 28 -#define R_ARM_JUMP24 29 -#define R_ARM_V4BX 40 -#define R_ARM_PREL31 42 +#define R_ARM_NONE 0 +#define R_ARM_PC24 1 +#define R_ARM_ABS32 2 +#define R_ARM_CALL 28 +#define R_ARM_JUMP24 29 +#define R_ARM_V4BX 40 +#define R_ARM_PREL31 42 +#define R_ARM_MOVW_ABS_NC 43 +#define R_ARM_MOVT_ABS 44 /* * These are used to set parameters in the core dumps. diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h index 1d77e51..59426a4 100644 --- a/arch/arm/include/asm/flat.h +++ b/arch/arm/include/asm/flat.h @@ -5,9 +5,6 @@ #ifndef __ARM_FLAT_H__ #define __ARM_FLAT_H__ -/* An odd number of words will be pushed after this alignment, so - deliberately misalign the value. */ -#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4) #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/arch/arm/include/asm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h deleted file mode 100644 index e521b70..0000000 --- a/arch/arm/include/asm/hardware/arm_twd.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_HARDWARE_TWD_H -#define __ASM_HARDWARE_TWD_H - -#define TWD_TIMER_LOAD 0x00 -#define TWD_TIMER_COUNTER 0x04 -#define TWD_TIMER_CONTROL 0x08 -#define TWD_TIMER_INTSTAT 0x0C - -#define TWD_WDOG_LOAD 0x20 -#define TWD_WDOG_COUNTER 0x24 -#define TWD_WDOG_CONTROL 0x28 -#define TWD_WDOG_INTSTAT 0x2C -#define TWD_WDOG_RESETSTAT 0x30 -#define TWD_WDOG_DISABLE 0x34 - -#define TWD_TIMER_CONTROL_ENABLE (1 << 0) -#define TWD_TIMER_CONTROL_ONESHOT (0 << 1) -#define TWD_TIMER_CONTROL_PERIODIC (1 << 1) -#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2) - -#endif diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 4924914..7f34333b 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -36,7 +36,7 @@ void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start); void gic_cpu_init(unsigned int gic_nr, void __iomem *base); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); -void gic_raise_softirq(cpumask_t cpumask, unsigned int irq); +void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); #endif #endif diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h new file mode 100644 index 0000000..50c7e7c --- /dev/null +++ b/arch/arm/include/asm/localtimer.h @@ -0,0 +1,63 @@ +/* + * arch/arm/include/asm/localtimer.h + * + * Copyright (C) 2004-2005 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_LOCALTIMER_H +#define __ASM_ARM_LOCALTIMER_H + +struct clock_event_device; + +/* + * Setup a per-cpu timer, whether it be a local timer or dummy broadcast + */ +void percpu_timer_setup(void); + +/* + * Called from assembly, this is the local timer IRQ handler + */ +asmlinkage void do_local_timer(struct pt_regs *); + + +#ifdef CONFIG_LOCAL_TIMERS + +#ifdef CONFIG_HAVE_ARM_TWD + +#include "smp_twd.h" + +#define local_timer_ack() twd_timer_ack() +#define local_timer_stop() twd_timer_stop() + +#else + +/* + * Platform provides this to acknowledge a local timer IRQ. + * Returns true if the local timer IRQ is to be processed. + */ +int local_timer_ack(void); + +/* + * Stop a local timer interrupt. + */ +void local_timer_stop(void); + +#endif + +/* + * Setup a local timer interrupt for a CPU. + */ +void local_timer_setup(struct clock_event_device *); + +#else + +static inline void local_timer_stop(void) +{ +} + +#endif + +#endif diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index 58cf91f..742c2aaeb 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -30,6 +30,14 @@ struct map_desc { #ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); + +struct mem_type; +extern const struct mem_type *get_mem_type(unsigned int type); +/* + * external interface to remap single page with appropriate type + */ +extern int ioremap_page(unsigned long virt, unsigned long phys, + const struct mem_type *mtype); #else #define iotable_init(map,num) do { } while (0) #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 110295c..1cd2d64 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -342,7 +342,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) return __va(ptr); } -#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd))) +#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd))) /* * Conversion functions: convert a page and protection to a page entry, diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h index ada93a8..4fc1565 100644 --- a/arch/arm/include/asm/sizes.h +++ b/arch/arm/include/asm/sizes.h @@ -29,6 +29,7 @@ #define SZ_512 0x00000200 #define SZ_1K 0x00000400 +#define SZ_2K 0x00000800 #define SZ_4K 0x00001000 #define SZ_8K 0x00002000 #define SZ_16K 0x00004000 diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index fad70da..a06e735 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -41,7 +41,7 @@ extern void show_ipi_list(struct seq_file *p); asmlinkage void do_IPI(struct pt_regs *regs); /* - * Setup the SMP cpu_possible_map + * Setup the set of possible CPUs (via set_cpu_possible) */ extern void smp_init_cpus(void); @@ -53,17 +53,7 @@ extern void smp_store_cpu_info(unsigned int cpuid); /* * Raise an IPI cross call on CPUs in callmap. */ -extern void smp_cross_call(cpumask_t callmap); - -/* - * Broadcast a timer interrupt to the other CPUs. - */ -extern void smp_send_timer(void); - -/* - * Broadcast a clock event to other CPUs. - */ -extern void smp_timer_broadcast(cpumask_t mask); +extern void smp_cross_call(const struct cpumask *mask); /* * Boot a secondary CPU, and assign it the specified idle task. @@ -102,46 +92,12 @@ extern int platform_cpu_kill(unsigned int cpu); extern void platform_cpu_enable(unsigned int cpu); extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi(cpumask_t mask); - -/* - * Local timer interrupt handling function (can be IPI'ed). - */ -extern void local_timer_interrupt(void); - -#ifdef CONFIG_LOCAL_TIMERS - -/* - * Stop a local timer interrupt. - */ -extern void local_timer_stop(void); - -/* - * Platform provides this to acknowledge a local timer IRQ - */ -extern int local_timer_ack(void); - -#else - -static inline void local_timer_stop(void) -{ -} - -#endif - -/* - * Setup a local timer interrupt for a CPU. - */ -extern void local_timer_setup(void); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); +#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask /* * show local interrupt info */ extern void show_local_irqs(struct seq_file *); -/* - * Called from assembly, this is the local timer IRQ handler - */ -asmlinkage void do_local_timer(struct pt_regs *); - #endif /* ifndef __ASM_ARM_SMP_H */ diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h new file mode 100644 index 0000000..2376835 --- /dev/null +++ b/arch/arm/include/asm/smp_scu.h @@ -0,0 +1,7 @@ +#ifndef __ASMARM_ARCH_SCU_H +#define __ASMARM_ARCH_SCU_H + +unsigned int scu_get_core_count(void __iomem *); +void scu_enable(void __iomem *); + +#endif diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h new file mode 100644 index 0000000..7be0978 --- /dev/null +++ b/arch/arm/include/asm/smp_twd.h @@ -0,0 +1,12 @@ +#ifndef __ASMARM_SMP_TWD_H +#define __ASMARM_SMP_TWD_H + +struct clock_event_device; + +extern void __iomem *twd_base; + +void twd_timer_stop(void); +int twd_timer_ack(void); +void twd_timer_setup(struct clock_event_device *); + +#endif diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index bd4dc8e..d65b2f5 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -248,6 +248,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size unsigned int tmp; #endif + smp_mb(); + switch (size) { #if __LINUX_ARM_ARCH__ >= 6 case 1: @@ -307,6 +309,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size __bad_xchg(ptr, size), ret = 0; break; } + smp_mb(); return ret; } @@ -316,6 +319,12 @@ extern void enable_hlt(void); #include <asm-generic/cmpxchg-local.h> +#if __LINUX_ARM_ARCH__ < 6 + +#ifdef CONFIG_SMP +#error "SMP is not supported on this platform" +#endif + /* * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make * them available. @@ -329,6 +338,173 @@ extern void enable_hlt(void); #include <asm-generic/cmpxchg.h> #endif +#else /* __LINUX_ARM_ARCH__ >= 6 */ + +extern void __bad_cmpxchg(volatile void *ptr, int size); + +/* + * cmpxchg only support 32-bits operands on ARMv6. + */ + +static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long oldval, res; + + switch (size) { +#ifdef CONFIG_CPU_32v6K + case 1: + do { + asm volatile("@ __cmpxchg1\n" + " ldrexb %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexbeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; + case 2: + do { + asm volatile("@ __cmpxchg1\n" + " ldrexh %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexheq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; +#endif /* CONFIG_CPU_32v6K */ + case 4: + do { + asm volatile("@ __cmpxchg4\n" + " ldrex %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; + default: + __bad_cmpxchg(ptr, size); + oldval = 0; + } + + return oldval; +} + +static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long ret; + + smp_mb(); + ret = __cmpxchg(ptr, old, new, size); + smp_mb(); + + return ret; +} + +#define cmpxchg(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr)))) + +static inline unsigned long __cmpxchg_local(volatile void *ptr, + unsigned long old, + unsigned long new, int size) +{ + unsigned long ret; + + switch (size) { +#ifndef CONFIG_CPU_32v6K + case 1: + case 2: + ret = __cmpxchg_local_generic(ptr, old, new, size); + break; +#endif /* !CONFIG_CPU_32v6K */ + default: + ret = __cmpxchg(ptr, old, new, size); + } + + return ret; +} + +#define cmpxchg_local(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg_local((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr)))) + +#ifdef CONFIG_CPU_32v6K + +/* + * Note : ARMv7-M (currently unsupported by Linux) does not support + * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should + * not be allowed to use __cmpxchg64. + */ +static inline unsigned long long __cmpxchg64(volatile void *ptr, + unsigned long long old, + unsigned long long new) +{ + register unsigned long long oldval asm("r0"); + register unsigned long long __old asm("r2") = old; + register unsigned long long __new asm("r4") = new; + unsigned long res; + + do { + asm volatile( + " @ __cmpxchg8\n" + " ldrexd %1, %H1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " teqeq %H1, %H3\n" + " strexdeq %0, %4, %H4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (__old), "r" (__new) + : "memory", "cc"); + } while (res); + + return oldval; +} + +static inline unsigned long long __cmpxchg64_mb(volatile void *ptr, + unsigned long long old, + unsigned long long new) +{ + unsigned long long ret; + + smp_mb(); + ret = __cmpxchg64(ptr, old, new); + smp_mb(); + + return ret; +} + +#define cmpxchg64(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n))) + +#define cmpxchg64_local(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg64((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n))) + +#else /* !CONFIG_CPU_32v6K */ + +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#endif /* CONFIG_CPU_32v6K */ + +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + #endif /* __ASSEMBLY__ */ #define arch_align_stack(x) (x) diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 11a5197..ff89d0b 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -22,6 +22,8 @@ obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o +obj-$(CONFIG_HAVE_ARM_TWD) += smp_twd.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c index d4a0da1..950391f 100644 --- a/arch/arm/kernel/elf.c +++ b/arch/arm/kernel/elf.c @@ -78,6 +78,15 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack) return 1; if (cpu_architecture() < CPU_ARCH_ARMv6) return 1; +#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT) + /* + * If we have support for OABI programs, we can never allow NX + * support - our signal syscall restart mechanism relies upon + * being able to execute code placed on the user stack. + */ + return 1; +#else return 0; +#endif } EXPORT_SYMBOL(arm_elf_read_implies_exec); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index d662a2f..83b1da6 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -815,10 +815,7 @@ __kuser_helper_start: */ __kuser_memory_barrier: @ 0xffff0fa0 - -#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP) - mcr p15, 0, r0, c7, c10, 5 @ dmb -#endif + smp_dmb usr_ret lr .align 5 diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index d1731e3..bac03c8 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, *(u32 *)loc = offset & 0x7fffffff; break; + case R_ARM_MOVW_ABS_NC: + case R_ARM_MOVT_ABS: + offset = *(u32 *)loc; + offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff); + offset = (offset ^ 0x8000) - 0x8000; + + offset += sym->st_value; + if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS) + offset >>= 16; + + *(u32 *)loc &= 0xfff0f000; + *(u32 *)loc |= ((offset & 0xf000) << 4) | + (offset & 0x0fff); + break; + default: printk(KERN_ERR "%s: unknown relocation: %u\n", module->name, ELF32_R_TYPE(rel->r_info)); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 7801aac..0d8097f 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -22,6 +22,8 @@ #include <linux/smp.h> #include <linux/seq_file.h> #include <linux/irq.h> +#include <linux/percpu.h> +#include <linux/clockchips.h> #include <asm/atomic.h> #include <asm/cacheflush.h> @@ -32,6 +34,7 @@ #include <asm/processor.h> #include <asm/tlbflush.h> #include <asm/ptrace.h> +#include <asm/localtimer.h> /* * as from 2.5, kernels no longer have an init_tasks structure @@ -163,7 +166,7 @@ int __cpuexit __cpu_disable(void) * Take this CPU offline. Once we clear this, we can't return, * and we must not schedule until we're ready to give up the cpu. */ - cpu_clear(cpu, cpu_online_map); + set_cpu_online(cpu, false); /* * OK - migrate IRQs away from this CPU @@ -274,9 +277,9 @@ asmlinkage void __cpuinit secondary_start_kernel(void) local_fiq_enable(); /* - * Setup local timer for this CPU. + * Setup the percpu timer for this CPU. */ - local_timer_setup(); + percpu_timer_setup(); calibrate_delay(); @@ -285,7 +288,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void) /* * OK, now it's safe to let the boot CPU continue */ - cpu_set(cpu, cpu_online_map); + set_cpu_online(cpu, true); /* * OK, it's off to the idle thread for us @@ -326,14 +329,14 @@ void __init smp_prepare_boot_cpu(void) per_cpu(cpu_data, cpu).idle = current; } -static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) +static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg) { unsigned long flags; unsigned int cpu; local_irq_save(flags); - for_each_cpu_mask(cpu, callmap) { + for_each_cpu(cpu, mask) { struct ipi_data *ipi = &per_cpu(ipi_data, cpu); spin_lock(&ipi->lock); @@ -344,19 +347,19 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) /* * Call the platform specific cross-CPU call function. */ - smp_cross_call(callmap); + smp_cross_call(mask); local_irq_restore(flags); } -void arch_send_call_function_ipi(cpumask_t mask) +void arch_send_call_function_ipi_mask(const struct cpumask *mask) { send_ipi_message(mask, IPI_CALL_FUNC); } void arch_send_call_function_single_ipi(int cpu) { - send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE); + send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); } void show_ipi_list(struct seq_file *p) @@ -383,10 +386,16 @@ void show_local_irqs(struct seq_file *p) seq_putc(p, '\n'); } +/* + * Timer (local or broadcast) support + */ +static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent); + static void ipi_timer(void) { + struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent); irq_enter(); - local_timer_interrupt(); + evt->event_handler(evt); irq_exit(); } @@ -405,6 +414,42 @@ asmlinkage void __exception do_local_timer(struct pt_regs *regs) } #endif +#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST +static void smp_timer_broadcast(const struct cpumask *mask) +{ + send_ipi_message(mask, IPI_TIMER); +} + +static void broadcast_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ +} + +static void local_timer_setup(struct clock_event_device *evt) +{ + evt->name = "dummy_timer"; + evt->features = CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_DUMMY; + evt->rating = 400; + evt->mult = 1; + evt->set_mode = broadcast_timer_set_mode; + evt->broadcast = smp_timer_broadcast; + + clockevents_register_device(evt); +} +#endif + +void __cpuinit percpu_timer_setup(void) +{ + unsigned int cpu = smp_processor_id(); + struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu); + + evt->cpumask = cpumask_of(cpu); + + local_timer_setup(evt); +} + static DEFINE_SPINLOCK(stop_lock); /* @@ -417,7 +462,7 @@ static void ipi_cpu_stop(unsigned int cpu) dump_stack(); spin_unlock(&stop_lock); - cpu_clear(cpu, cpu_online_map); + set_cpu_online(cpu, false); local_fiq_disable(); local_irq_disable(); @@ -498,26 +543,14 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs) void smp_send_reschedule(int cpu) { - send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE); -} - -void smp_send_timer(void) -{ - cpumask_t mask = cpu_online_map; - cpu_clear(smp_processor_id(), mask); - send_ipi_message(mask, IPI_TIMER); -} - -void smp_timer_broadcast(cpumask_t mask) -{ - send_ipi_message(mask, IPI_TIMER); + send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE); } void smp_send_stop(void) { cpumask_t mask = cpu_online_map; cpu_clear(smp_processor_id(), mask); - send_ipi_message(mask, IPI_CPU_STOP); + send_ipi_message(&mask, IPI_CPU_STOP); } /* @@ -528,20 +561,17 @@ int setup_profiling_timer(unsigned int multiplier) return -EINVAL; } -static int -on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask) +static void +on_each_cpu_mask(void (*func)(void *), void *info, int wait, + const struct cpumask *mask) { - int ret = 0; - preempt_disable(); - ret = smp_call_function_mask(mask, func, info, wait); - if (cpu_isset(smp_processor_id(), mask)) + smp_call_function_many(mask, func, info, wait); + if (cpumask_test_cpu(smp_processor_id(), mask)) func(info); preempt_enable(); - - return ret; } /**********************************************************************/ @@ -602,20 +632,17 @@ void flush_tlb_all(void) void flush_tlb_mm(struct mm_struct *mm) { - cpumask_t mask = mm->cpu_vm_mask; - - on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask); + on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask); } void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) { - cpumask_t mask = vma->vm_mm->cpu_vm_mask; struct tlb_args ta; ta.ta_vma = vma; ta.ta_start = uaddr; - on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask); + on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask); } void flush_tlb_kernel_page(unsigned long kaddr) @@ -630,14 +657,13 @@ void flush_tlb_kernel_page(unsigned long kaddr) void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - cpumask_t mask = vma->vm_mm->cpu_vm_mask; struct tlb_args ta; ta.ta_vma = vma; ta.ta_start = start; ta.ta_end = end; - on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask); + on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask); } void flush_tlb_kernel_range(unsigned long start, unsigned long end) diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c new file mode 100644 index 0000000..d3831f6 --- /dev/null +++ b/arch/arm/kernel/smp_scu.c @@ -0,0 +1,48 @@ +/* + * linux/arch/arm/kernel/smp_scu.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/smp_scu.h> +#include <asm/cacheflush.h> + +#define SCU_CTRL 0x00 +#define SCU_CONFIG 0x04 +#define SCU_CPU_STATUS 0x08 +#define SCU_INVALIDATE 0x0c +#define SCU_FPGA_REVISION 0x10 + +/* + * Get the number of CPU cores from the SCU configuration + */ +unsigned int __init scu_get_core_count(void __iomem *scu_base) +{ + unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG); + return (ncores & 0x03) + 1; +} + +/* + * Enable the SCU + */ +void __init scu_enable(void __iomem *scu_base) +{ + u32 scu_ctrl; + + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); + scu_ctrl |= 1; + __raw_writel(scu_ctrl, scu_base + SCU_CTRL); + + /* + * Ensure that the data accessed by CPU0 before the SCU was + * initialised is visible to the other CPUs. + */ + flush_cache_all(); +} diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c new file mode 100644 index 0000000..d8c88c6 --- /dev/null +++ b/arch/arm/kernel/smp_twd.c @@ -0,0 +1,175 @@ +/* + * linux/arch/arm/kernel/smp_twd.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/smp.h> +#include <linux/jiffies.h> +#include <linux/clockchips.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/smp_twd.h> +#include <asm/hardware/gic.h> + +#define TWD_TIMER_LOAD 0x00 +#define TWD_TIMER_COUNTER 0x04 +#define TWD_TIMER_CONTROL 0x08 +#define TWD_TIMER_INTSTAT 0x0C + +#define TWD_WDOG_LOAD 0x20 +#define TWD_WDOG_COUNTER 0x24 +#define TWD_WDOG_CONTROL 0x28 +#define TWD_WDOG_INTSTAT 0x2C +#define TWD_WDOG_RESETSTAT 0x30 +#define TWD_WDOG_DISABLE 0x34 + +#define TWD_TIMER_CONTROL_ENABLE (1 << 0) +#define TWD_TIMER_CONTROL_ONESHOT (0 << 1) +#define TWD_TIMER_CONTROL_PERIODIC (1 << 1) +#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2) + +/* set up by the platform code */ +void __iomem *twd_base; + +static unsigned long twd_timer_rate; + +static void twd_set_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + unsigned long ctrl; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* timer load already set up */ + ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE + | TWD_TIMER_CONTROL_PERIODIC; + break; + case CLOCK_EVT_MODE_ONESHOT: + /* period set, and timer enabled in 'next_event' hook */ + ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT; + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + ctrl = 0; + } + + __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL); +} + +static int twd_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL); + + ctrl |= TWD_TIMER_CONTROL_ENABLE; + + __raw_writel(evt, twd_base + TWD_TIMER_COUNTER); + __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL); + + return 0; +} + +/* + * local_timer_ack: checks for a local timer interrupt. + * + * If a local timer interrupt has occurred, acknowledge and return 1. + * Otherwise, return 0. + */ +int twd_timer_ack(void) +{ + if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) { + __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); + return 1; + } + + return 0; +} + +static void __cpuinit twd_calibrate_rate(void) +{ + unsigned long load, count; + u64 waitjiffies; + + /* + * If this is the first time round, we need to work out how fast + * the timer ticks + */ + if (twd_timer_rate == 0) { + printk(KERN_INFO "Calibrating local timer... "); + + /* Wait for a tick to start */ + waitjiffies = get_jiffies_64() + 1; + + while (get_jiffies_64() < waitjiffies) + udelay(10); + + /* OK, now the tick has started, let's get the timer going */ + waitjiffies += 5; + + /* enable, no interrupt or reload */ + __raw_writel(0x1, twd_base + TWD_TIMER_CONTROL); + + /* maximum value */ + __raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER); + + while (get_jiffies_64() < waitjiffies) + udelay(10); + + count = __raw_readl(twd_base + TWD_TIMER_COUNTER); + + twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); + + printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000, + (twd_timer_rate / 100000) % 100); + } + + load = twd_timer_rate / HZ; + + __raw_writel(load, twd_base + TWD_TIMER_LOAD); +} + +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit twd_timer_setup(struct clock_event_device *clk) +{ + unsigned long flags; + + twd_calibrate_rate(); + + clk->name = "local_timer"; + clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + clk->rating = 350; + clk->set_mode = twd_set_mode; + clk->set_next_event = twd_set_next_event; + clk->shift = 20; + clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift); + clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk); + clk->min_delta_ns = clockevent_delta2ns(0xf, clk); + + /* Make sure our local interrupt controller has this enabled */ + local_irq_save(flags); + get_irq_chip(clk->irq)->unmask(clk->irq); + local_irq_restore(flags); + + clockevents_register_device(clk); +} + +/* + * take a local timer down + */ +void __cpuexit twd_timer_stop(void) +{ + __raw_writel(0, twd_base + TWD_TIMER_CONTROL); +} diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 2e787d4..c7f2627 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -18,12 +18,14 @@ mov r2, #1 add r1, r1, r0, lsr #3 @ Get byte offset mov r3, r2, lsl r3 @ create mask + smp_dmb 1: ldrexb r2, [r1] ands r0, r2, r3 @ save old value of bit \instr r2, r2, r3 @ toggle bit strexb ip, r2, [r1] cmp ip, #0 bne 1b + smp_dmb cmp r0, #0 movne r0, #1 2: mov pc, lr diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index e263fda..970fd6b 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -156,6 +156,8 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = { * MCI (SD/MMC) */ static struct at91_mmc_data __initdata afeb9260_mmc_data = { + .det_pin = AT91_PIN_PC9, + .wp_pin = AT91_PIN_PC4, .slot_b = 1, .wire4 = 1, }; @@ -164,6 +166,8 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = { static struct i2c_board_info __initdata afeb9260_i2c_devices[] = { { + I2C_BOARD_INFO("tlv320aic23", 0x1a), + }, { I2C_BOARD_INFO("fm3130", 0x68), }, { I2C_BOARD_INFO("24c64", 0x50), @@ -196,6 +200,8 @@ static void __init afeb9260_board_init(void) /* I2C */ at91_add_device_i2c(afeb9260_i2c_devices, ARRAY_SIZE(afeb9260_i2c_devices)); + /* Audio */ + at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); } MACHINE_START(AFEB9260, "Custom afeb9260 board") diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 438efbb..cc270be 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -218,6 +218,13 @@ static struct gpio_led ek_leds[] = { } }; +static struct i2c_board_info __initdata ek_i2c_devices[] = { + { + I2C_BOARD_INFO("24c512", 0x50), + }, +}; + + static void __init ek_board_init(void) { /* Serial */ @@ -235,7 +242,7 @@ static void __init ek_board_init(void) /* MMC */ at91_add_device_mmc(0, &ek_mmc_data); /* I2C */ - at91_add_device_i2c(NULL, 0); + at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* PCK0 provides MCLK to the WM8731 */ diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index e434510..bac578f 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -43,6 +43,25 @@ #define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM) +/* + * Chips have some kind of clocks : group them by functionality + */ +#define cpu_has_utmi() ( cpu_is_at91cap9() \ + || cpu_is_at91sam9rl()) + +#define cpu_has_800M_plla() (cpu_is_at91sam9g20()) + +#define cpu_has_pllb() (!cpu_is_at91sam9rl()) + +#define cpu_has_upll() (0) + +/* USB host HS & FS */ +#define cpu_has_uhp() (!cpu_is_at91sam9rl()) + +/* USB device FS only */ +#define cpu_has_udpfs() (!cpu_is_at91sam9rl()) + + static LIST_HEAD(clocks); static DEFINE_SPINLOCK(clk_lock); @@ -140,7 +159,7 @@ static struct clk utmi_clk = { }; static struct clk uhpck = { .name = "uhpck", - .parent = &pllb, + /*.parent = ... we choose parent at runtime */ .mode = pmc_sys_mode, }; @@ -173,7 +192,11 @@ static struct clk __init *at91_css_to_clk(unsigned long css) case AT91_PMC_CSS_PLLA: return &plla; case AT91_PMC_CSS_PLLB: - return &pllb; + if (cpu_has_upll()) + /* CSS_PLLB == CSS_UPLL */ + return &utmi_clk; + else if (cpu_has_pllb()) + return &pllb; } return NULL; @@ -322,7 +345,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) u32 pckr; pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); - pckr &= AT91_PMC_CSS_PLLB; /* clock selection */ + pckr &= AT91_PMC_CSS; /* clock selection */ pckr |= prescale << 2; at91_sys_write(AT91_PMC_PCKR(clk->id), pckr); clk->rate_hz = actual; @@ -361,7 +384,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) } EXPORT_SYMBOL(clk_set_parent); -/* establish PCK0..PCK3 parentage and rate */ +/* establish PCK0..PCKN parentage and rate */ static void __init init_programmable_clock(struct clk *clk) { struct clk *parent; @@ -389,11 +412,13 @@ static int at91_clk_show(struct seq_file *s, void *unused) seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR)); seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR)); seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR)); - if (!cpu_is_at91sam9rl()) + if (cpu_has_pllb()) seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR)); - if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) + if (cpu_has_utmi()) seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR)); seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR)); + if (cpu_has_upll()) + seq_printf(s, "USB = %8x\n", at91_sys_read(AT91_PMC_USB)); seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR)); seq_printf(s, "\n"); @@ -554,16 +579,60 @@ static struct clk *const standard_pmc_clocks[] __initdata = { &clk32k, &main_clk, &plla, - &pllb, - - /* PLLB children (USB) */ - &udpck, - &uhpck, /* MCK */ &mck }; +/* PLLB generated USB full speed clock init */ +static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) +{ + /* + * USB clock init: choose 48 MHz PLLB value, + * disable 48MHz clock during usb peripheral suspend. + * + * REVISIT: assumes MCK doesn't derive from PLLB! + */ + uhpck.parent = &pllb; + + at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M; + pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); + if (cpu_is_at91rm9200()) { + uhpck.pmc_mask = AT91RM9200_PMC_UHP; + udpck.pmc_mask = AT91RM9200_PMC_UDP; + at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); + } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) { + uhpck.pmc_mask = AT91SAM926x_PMC_UHP; + udpck.pmc_mask = AT91SAM926x_PMC_UDP; + } else if (cpu_is_at91cap9()) { + uhpck.pmc_mask = AT91CAP9_PMC_UHP; + } + at91_sys_write(AT91_CKGR_PLLBR, 0); + + udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); + uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); +} + +/* UPLL generated USB full speed clock init */ +static void __init at91_upll_usbfs_clock_init(unsigned long main_clock) +{ + /* + * USB clock init: choose 480 MHz from UPLL, + */ + unsigned int usbr = AT91_PMC_USBS_UPLL; + + /* Setup divider by 10 to reach 48 MHz */ + usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV; + + at91_sys_write(AT91_PMC_USB, usbr); + + /* Now set uhpck values */ + uhpck.parent = &utmi_clk; + uhpck.pmc_mask = AT91SAM926x_PMC_UHP; + uhpck.rate_hz = utmi_clk.parent->rate_hz; + uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8); +} + int __init at91_clock_init(unsigned long main_clock) { unsigned tmp, freq, mckr; @@ -585,43 +654,37 @@ int __init at91_clock_init(unsigned long main_clock) /* report if PLLA is more than mildly overclocked */ plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR)); - if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000) - || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000)) + if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000) + || (cpu_has_800M_plla() && plla.rate_hz > 800000000)) pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000); - /* - * USB clock init: choose 48 MHz PLLB value, - * disable 48MHz clock during usb peripheral suspend. - * - * REVISIT: assumes MCK doesn't derive from PLLB! - */ - at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M; - pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); - if (cpu_is_at91rm9200()) { - uhpck.pmc_mask = AT91RM9200_PMC_UHP; - udpck.pmc_mask = AT91RM9200_PMC_UDP; - at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); - } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) { - uhpck.pmc_mask = AT91SAM926x_PMC_UHP; - udpck.pmc_mask = AT91SAM926x_PMC_UDP; - } else if (cpu_is_at91cap9()) { - uhpck.pmc_mask = AT91CAP9_PMC_UHP; + + if (cpu_has_upll() && !cpu_has_pllb()) { + /* setup UTMI clock as the fourth primary clock + * (instead of pllb) */ + utmi_clk.type |= CLK_TYPE_PRIMARY; + utmi_clk.id = 3; } - at91_sys_write(AT91_CKGR_PLLBR, 0); - udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); - uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); /* * USB HS clock init */ - if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) { + if (cpu_has_utmi()) /* * multiplier is hard-wired to 40 * (obtain the USB High Speed 480 MHz when input is 12 MHz) */ utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz; - } + + /* + * USB FS clock init + */ + if (cpu_has_pllb()) + at91_pllb_usbfs_clock_init(main_clock); + if (cpu_has_upll()) + /* assumes that we choose UPLL for USB and not PLLA */ + at91_upll_usbfs_clock_init(main_clock); /* * MCK and CPU derive from one of those primary clocks. @@ -631,21 +694,31 @@ int __init at91_clock_init(unsigned long main_clock) mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS); freq = mck.parent->rate_hz; freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */ - if (cpu_is_at91rm9200()) + if (cpu_is_at91rm9200()) { mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ - else if (cpu_is_at91sam9g20()) { + } else if (cpu_is_at91sam9g20()) { mck.rate_hz = (mckr & AT91_PMC_MDIV) ? freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */ if (mckr & AT91_PMC_PDIV) freq /= 2; /* processor clock division */ - } else + } else { mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ + } /* Register the PMC's standard clocks */ for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) list_add_tail(&standard_pmc_clocks[i]->node, &clocks); - if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) + if (cpu_has_pllb()) + list_add_tail(&pllb.node, &clocks); + + if (cpu_has_uhp()) + list_add_tail(&uhpck.node, &clocks); + + if (cpu_has_udpfs()) + list_add_tail(&udpck.node, &clocks); + + if (cpu_has_utmi()) list_add_tail(&utmi_clk.node, &clocks); /* MCK and CPU clock are "always on" */ diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 9561e33..64589ea 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -23,7 +23,7 @@ #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */ +#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */ #define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ #define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ #define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ @@ -39,11 +39,11 @@ #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ -#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */ +#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */ #define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ #define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ #define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ -#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */ +#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */ #define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ @@ -72,6 +72,7 @@ #define AT91_PMC_CSS_MAIN (1 << 0) #define AT91_PMC_CSS_PLLA (2 << 0) #define AT91_PMC_CSS_PLLB (3 << 0) +#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */ #define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ #define AT91_PMC_PRES_1 (0 << 2) #define AT91_PMC_PRES_2 (1 << 2) @@ -88,12 +89,25 @@ #define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ #define AT91SAM9_PMC_MDIV_2 (1 << 8) #define AT91SAM9_PMC_MDIV_4 (2 << 8) -#define AT91SAM9_PMC_MDIV_6 (3 << 8) +#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */ +#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */ #define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ #define AT91_PMC_PDIV_1 (0 << 12) #define AT91_PMC_PDIV_2 (1 << 12) +#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */ +#define AT91_PMC_PLLADIV2_OFF (0 << 12) +#define AT91_PMC_PLLADIV2_ON (1 << 12) -#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ +#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register [some SAM9 only] */ +#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */ +#define AT91_PMC_USBS_PLLA (0 << 0) +#define AT91_PMC_USBS_UPLL (1 << 0) +#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */ + +#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */ +#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */ +#define AT91_PMC_CSSMCK_CSS (0 << 8) +#define AT91_PMC_CSSMCK_MCK (1 << 8) #define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ #define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ @@ -102,7 +116,7 @@ #define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ #define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ #define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ -#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */ +#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */ #define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */ #define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index bac988e..be747f5 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -1,22 +1,102 @@ if ARCH_DAVINCI +config AINTC + bool + +config CP_INTC + bool + menu "TI DaVinci Implementations" comment "DaVinci Core Type" -config ARCH_DAVINCI644x - default y +config ARCH_DAVINCI_DM644x bool "DaVinci 644x based system" + select AINTC + +config ARCH_DAVINCI_DM355 + bool "DaVinci 355 based system" + select AINTC + +config ARCH_DAVINCI_DM646x + bool "DaVinci 646x based system" + select AINTC comment "DaVinci Board Type" config MACH_DAVINCI_EVM - bool "TI DaVinci EVM" + bool "TI DM644x EVM" default y - depends on ARCH_DAVINCI644x + depends on ARCH_DAVINCI_DM644x + help + Configure this option to specify the whether the board used + for development is a DM644x EVM + +config MACH_SFFSDR + bool "Lyrtech SFFSDR" + depends on ARCH_DAVINCI_DM644x + help + Say Y here to select the Lyrtech Small Form Factor + Software Defined Radio (SFFSDR) board. + +config MACH_DAVINCI_DM355_EVM + bool "TI DM355 EVM" + depends on ARCH_DAVINCI_DM355 + help + Configure this option to specify the whether the board used + for development is a DM355 EVM + +config MACH_DM355_LEOPARD + bool "DM355 Leopard board" + depends on ARCH_DAVINCI_DM355 + help + Configure this option to specify the whether the board used + for development is a DM355 Leopard board. + +config MACH_DAVINCI_DM6467_EVM + bool "TI DM6467 EVM" + depends on ARCH_DAVINCI_DM646x help Configure this option to specify the whether the board used - for development is a DaVinci EVM + for development is a DM6467 EVM + + +config DAVINCI_MUX + bool "DAVINCI multiplexing support" + depends on ARCH_DAVINCI + default y + help + Pin multiplexing support for DAVINCI boards. If your bootloader + sets the multiplexing correctly, say N. Otherwise, or if unsure, + say Y. + +config DAVINCI_MUX_DEBUG + bool "Multiplexing debug output" + depends on DAVINCI_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. + +config DAVINCI_MUX_WARNINGS + bool "Warn about pins the bootloader didn't set up" + depends on DAVINCI_MUX + help + Choose Y here to warn whenever driver initialization logic needs + to change the pin multiplexing setup. When there are no warnings + printed, it's safe to deselect DAVINCI_MUX for your product. + +config DAVINCI_RESET_CLOCKS + bool "Reset unused clocks during boot" + depends on ARCH_DAVINCI + help + Say Y if you want to reset unused clocks during boot. + This option saves power, but assumes all drivers are + using the clock framework. Broken drivers that do not + yet use clock framework may not work with this option. + If you are booting from another operating system, you + probably do not want this option enabled until your + device drivers work properly. endmenu diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 4dc4585..059ab78 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -4,8 +4,22 @@ # # Common objects -obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ - gpio.o mux.o devices.o usb.o +obj-y := time.o clock.o serial.o io.o psc.o \ + gpio.o devices.o dma.o usb.o common.o sram.o + +obj-$(CONFIG_DAVINCI_MUX) += mux.o + +# Chip specific +obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o +obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o +obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o + +obj-$(CONFIG_AINTC) += irq.o +obj-$(CONFIG_CP_INTC) += cp_intc.o # Board specific -obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o +obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o +obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o +obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o +obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o +obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c new file mode 100644 index 0000000..5ac2f56 --- /dev/null +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -0,0 +1,298 @@ +/* + * TI DaVinci EVM board support + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> +#include <linux/i2c.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/clk.h> +#include <linux/spi/spi.h> +#include <linux/spi/eeprom.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <mach/hardware.h> +#include <mach/dm355.h> +#include <mach/psc.h> +#include <mach/common.h> +#include <mach/i2c.h> +#include <mach/serial.h> +#include <mach/nand.h> +#include <mach/mmc.h> +#include <mach/common.h> + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +/* NOTE: this is geared for the standard config, with a socketed + * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you + * swap chips, maybe with a different block size, partitioning may + * need to be changed. + */ +#define NAND_BLOCK_SIZE SZ_128K + +static struct mtd_partition davinci_nand_partitions[] = { + { + /* UBL (a few copies) plus U-Boot */ + .name = "bootloader", + .offset = 0, + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + /* U-Boot environment */ + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = 1 * NAND_BLOCK_SIZE, + .mask_flags = 0, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, { + .name = "filesystem1", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512M, + .mask_flags = 0, + }, { + .name = "filesystem2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* two blocks with bad block table (and mirror) at the end */ +}; + +static struct davinci_nand_pdata davinci_nand_data = { + .mask_chipsel = BIT(14), + .parts = davinci_nand_partitions, + .nr_parts = ARRAY_SIZE(davinci_nand_partitions), + .ecc_mode = NAND_ECC_HW_SYNDROME, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_nand_resources[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_nand_device = { + .name = "davinci_nand", + .id = 0, + + .num_resources = ARRAY_SIZE(davinci_nand_resources), + .resource = davinci_nand_resources, + + .dev = { + .platform_data = &davinci_nand_data, + }, +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 400 /* kHz */, + .bus_delay = 0 /* usec */, +}; + +static int dm355evm_mmc_gpios = -EINVAL; + +static void dm355evm_mmcsd_gpios(unsigned gpio) +{ + gpio_request(gpio + 0, "mmc0_ro"); + gpio_request(gpio + 1, "mmc0_cd"); + gpio_request(gpio + 2, "mmc1_ro"); + gpio_request(gpio + 3, "mmc1_cd"); + + /* we "know" these are input-only so we don't + * need to call gpio_direction_input() + */ + + dm355evm_mmc_gpios = gpio; +} + +static struct i2c_board_info dm355evm_i2c_info[] = { + { I2C_BOARD_INFO("dm355evm_msp", 0x25), + .platform_data = dm355evm_mmcsd_gpios, + /* plus irq */ }, + /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */ + /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */ +}; + +static void __init evm_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + + gpio_request(5, "dm355evm_msp"); + gpio_direction_input(5); + dm355evm_i2c_info[0].irq = gpio_to_irq(5); + + i2c_register_board_info(1, dm355evm_i2c_info, + ARRAY_SIZE(dm355evm_i2c_info)); +} + +static struct resource dm355evm_dm9000_rsrc[] = { + { + /* addr */ + .start = 0x04014000, + .end = 0x04014001, + .flags = IORESOURCE_MEM, + }, { + /* data */ + .start = 0x04014002, + .end = 0x04014003, + .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ + | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */, + }, +}; + +static struct platform_device dm355evm_dm9000 = { + .name = "dm9000", + .id = -1, + .resource = dm355evm_dm9000_rsrc, + .num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc), +}; + +static struct platform_device *davinci_evm_devices[] __initdata = { + &dm355evm_dm9000, + &davinci_nand_device, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init dm355_evm_map_io(void) +{ + dm355_init(); +} + +static int dm355evm_mmc_get_cd(int module) +{ + if (!gpio_is_valid(dm355evm_mmc_gpios)) + return -ENXIO; + /* low == card present */ + return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1); +} + +static int dm355evm_mmc_get_ro(int module) +{ + if (!gpio_is_valid(dm355evm_mmc_gpios)) + return -ENXIO; + /* high == card's write protect switch active */ + return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0); +} + +static struct davinci_mmc_config dm355evm_mmc_config = { + .get_cd = dm355evm_mmc_get_cd, + .get_ro = dm355evm_mmc_get_ro, + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, + .version = MMC_CTLR_VERSION_1, +}; + +/* Don't connect anything to J10 unless you're only using USB host + * mode *and* have to do so with some kind of gender-bender. If + * you have proper Mini-B or Mini-A cables (or Mini-A adapters) + * the ID pin won't need any help. + */ +#ifdef CONFIG_USB_MUSB_PERIPHERAL +#define USB_ID_VALUE 0 /* ID pulled high; *should* float */ +#else +#define USB_ID_VALUE 1 /* ID pulled low */ +#endif + +static struct spi_eeprom at25640a = { + .byte_len = SZ_64K / 8, + .name = "at25640a", + .page_size = 32, + .flags = EE_ADDR2, +}; + +static struct spi_board_info dm355_evm_spi_info[] __initconst = { + { + .modalias = "at25", + .platform_data = &at25640a, + .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */ + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, +}; + +static __init void dm355_evm_init(void) +{ + struct clk *aemif; + + gpio_request(1, "dm9000"); + gpio_direction_input(1); + dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1); + + aemif = clk_get(&dm355evm_dm9000.dev, "aemif"); + if (IS_ERR(aemif)) + WARN("%s: unable to get AEMIF clock\n", __func__); + else + clk_enable(aemif); + + platform_add_devices(davinci_evm_devices, + ARRAY_SIZE(davinci_evm_devices)); + evm_init_i2c(); + davinci_serial_init(&uart_config); + + /* NOTE: NAND flash timings set by the UBL are slower than + * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204 + * but could be 0x0400008c for about 25% faster page reads. + */ + + gpio_request(2, "usb_id_toggle"); + gpio_direction_output(2, USB_ID_VALUE); + /* irlml6401 switches over 1A in under 8 msec */ + setup_usb(500, 8); + + davinci_setup_mmc(0, &dm355evm_mmc_config); + davinci_setup_mmc(1, &dm355evm_mmc_config); + + dm355_init_spi0(BIT(0), dm355_evm_spi_info, + ARRAY_SIZE(dm355_evm_spi_info)); +} + +static __init void dm355_evm_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (0x80000100), + .map_io = dm355_evm_map_io, + .init_irq = dm355_evm_irq_init, + .timer = &davinci_timer, + .init_machine = dm355_evm_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c new file mode 100644 index 0000000..28c9008 --- /dev/null +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -0,0 +1,296 @@ +/* + * DM355 leopard board support + * + * Based on board-dm355-evm.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> +#include <linux/i2c.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/clk.h> +#include <linux/spi/spi.h> +#include <linux/spi/eeprom.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <mach/hardware.h> +#include <mach/dm355.h> +#include <mach/psc.h> +#include <mach/common.h> +#include <mach/i2c.h> +#include <mach/serial.h> +#include <mach/nand.h> +#include <mach/mmc.h> +#include <mach/common.h> + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +/* NOTE: this is geared for the standard config, with a socketed + * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you + * swap chips, maybe with a different block size, partitioning may + * need to be changed. + */ +#define NAND_BLOCK_SIZE SZ_128K + +static struct mtd_partition davinci_nand_partitions[] = { + { + /* UBL (a few copies) plus U-Boot */ + .name = "bootloader", + .offset = 0, + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + /* U-Boot environment */ + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = 1 * NAND_BLOCK_SIZE, + .mask_flags = 0, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, { + .name = "filesystem1", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512M, + .mask_flags = 0, + }, { + .name = "filesystem2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* two blocks with bad block table (and mirror) at the end */ +}; + +static struct davinci_nand_pdata davinci_nand_data = { + .mask_chipsel = BIT(14), + .parts = davinci_nand_partitions, + .nr_parts = ARRAY_SIZE(davinci_nand_partitions), + .ecc_mode = NAND_ECC_HW_SYNDROME, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_nand_resources[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_nand_device = { + .name = "davinci_nand", + .id = 0, + + .num_resources = ARRAY_SIZE(davinci_nand_resources), + .resource = davinci_nand_resources, + + .dev = { + .platform_data = &davinci_nand_data, + }, +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 400 /* kHz */, + .bus_delay = 0 /* usec */, +}; + +static int leopard_mmc_gpio = -EINVAL; + +static void dm355leopard_mmcsd_gpios(unsigned gpio) +{ + gpio_request(gpio + 0, "mmc0_ro"); + gpio_request(gpio + 1, "mmc0_cd"); + gpio_request(gpio + 2, "mmc1_ro"); + gpio_request(gpio + 3, "mmc1_cd"); + + /* we "know" these are input-only so we don't + * need to call gpio_direction_input() + */ + + leopard_mmc_gpio = gpio; +} + +static struct i2c_board_info dm355leopard_i2c_info[] = { + { I2C_BOARD_INFO("dm355leopard_msp", 0x25), + .platform_data = dm355leopard_mmcsd_gpios, + /* plus irq */ }, + /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */ + /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */ +}; + +static void __init leopard_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + + gpio_request(5, "dm355leopard_msp"); + gpio_direction_input(5); + dm355leopard_i2c_info[0].irq = gpio_to_irq(5); + + i2c_register_board_info(1, dm355leopard_i2c_info, + ARRAY_SIZE(dm355leopard_i2c_info)); +} + +static struct resource dm355leopard_dm9000_rsrc[] = { + { + /* addr */ + .start = 0x04000000, + .end = 0x04000001, + .flags = IORESOURCE_MEM, + }, { + /* data */ + .start = 0x04000016, + .end = 0x04000017, + .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ + | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */, + }, +}; + +static struct platform_device dm355leopard_dm9000 = { + .name = "dm9000", + .id = -1, + .resource = dm355leopard_dm9000_rsrc, + .num_resources = ARRAY_SIZE(dm355leopard_dm9000_rsrc), +}; + +static struct platform_device *davinci_leopard_devices[] __initdata = { + &dm355leopard_dm9000, + &davinci_nand_device, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init dm355_leopard_map_io(void) +{ + dm355_init(); +} + +static int dm355leopard_mmc_get_cd(int module) +{ + if (!gpio_is_valid(leopard_mmc_gpio)) + return -ENXIO; + /* low == card present */ + return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1); +} + +static int dm355leopard_mmc_get_ro(int module) +{ + if (!gpio_is_valid(leopard_mmc_gpio)) + return -ENXIO; + /* high == card's write protect switch active */ + return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0); +} + +static struct davinci_mmc_config dm355leopard_mmc_config = { + .get_cd = dm355leopard_mmc_get_cd, + .get_ro = dm355leopard_mmc_get_ro, + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, +}; + +/* Don't connect anything to J10 unless you're only using USB host + * mode *and* have to do so with some kind of gender-bender. If + * you have proper Mini-B or Mini-A cables (or Mini-A adapters) + * the ID pin won't need any help. + */ +#ifdef CONFIG_USB_MUSB_PERIPHERAL +#define USB_ID_VALUE 0 /* ID pulled high; *should* float */ +#else +#define USB_ID_VALUE 1 /* ID pulled low */ +#endif + +static struct spi_eeprom at25640a = { + .byte_len = SZ_64K / 8, + .name = "at25640a", + .page_size = 32, + .flags = EE_ADDR2, +}; + +static struct spi_board_info dm355_leopard_spi_info[] __initconst = { + { + .modalias = "at25", + .platform_data = &at25640a, + .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */ + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, +}; + +static __init void dm355_leopard_init(void) +{ + struct clk *aemif; + + gpio_request(9, "dm9000"); + gpio_direction_input(9); + dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9); + + aemif = clk_get(&dm355leopard_dm9000.dev, "aemif"); + if (IS_ERR(aemif)) + WARN("%s: unable to get AEMIF clock\n", __func__); + else + clk_enable(aemif); + + platform_add_devices(davinci_leopard_devices, + ARRAY_SIZE(davinci_leopard_devices)); + leopard_init_i2c(); + davinci_serial_init(&uart_config); + + /* NOTE: NAND flash timings set by the UBL are slower than + * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204 + * but could be 0x0400008c for about 25% faster page reads. + */ + + gpio_request(2, "usb_id_toggle"); + gpio_direction_output(2, USB_ID_VALUE); + /* irlml6401 switches over 1A in under 8 msec */ + setup_usb(500, 8); + + davinci_setup_mmc(0, &dm355leopard_mmc_config); + davinci_setup_mmc(1, &dm355leopard_mmc_config); + + dm355_init_spi0(BIT(0), dm355_leopard_spi_info, + ARRAY_SIZE(dm355_leopard_spi_info)); +} + +static __init void dm355_leopard_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (0x80000100), + .map_io = dm355_leopard_map_io, + .init_irq = dm355_leopard_irq_init, + .timer = &davinci_timer, + .init_machine = dm355_leopard_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 0b97a52..d9d4045 100644 --- a/arch/arm/mach-davinci/board-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -15,15 +15,19 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/memory.h> #include <linux/i2c.h> #include <linux/i2c/pcf857x.h> #include <linux/i2c/at24.h> - +#include <linux/etherdevice.h> #include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/io.h> +#include <linux/phy.h> +#include <linux/clk.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -32,25 +36,37 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/hardware.h> +#include <mach/dm644x.h> #include <mach/common.h> #include <mach/i2c.h> +#include <mach/serial.h> +#include <mach/mux.h> +#include <mach/psc.h> +#include <mach/nand.h> +#include <mach/mmc.h> +#include <mach/emac.h> +#include <mach/common.h> -/* other misc. init functions */ -void __init davinci_psc_init(void); -void __init davinci_irq_init(void); -void __init davinci_map_common_io(void); -void __init davinci_init_common_hw(void); +#define DM644X_EVM_PHY_MASK (0x2) +#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) +#define DAVINCI_CFC_ATA_BASE 0x01C66000 + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000 + +#define LXT971_PHY_ID (0x001378e2) +#define LXT971_PHY_MASK (0xfffffff0) static struct mtd_partition davinci_evm_norflash_partitions[] = { - /* bootloader (U-Boot, etc) in first 4 sectors */ + /* bootloader (UBL, U-Boot, etc) in first 5 sectors */ { .name = "bootloader", .offset = 0, - .size = 4 * SZ_64K, + .size = 5 * SZ_64K, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, /* bootloader params in the next 1 sectors */ @@ -100,10 +116,89 @@ static struct platform_device davinci_evm_norflash_device = { .resource = &davinci_evm_norflash_resource, }; -#endif +/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks). + * It may used instead of the (default) NOR chip to boot, using TI's + * tools to install the secondary boot loader (UBL) and U-Boot. + */ +struct mtd_partition davinci_evm_nandflash_partition[] = { + /* Bootloader layout depends on whose u-boot is installed, but we + * can hide all the details. + * - block 0 for u-boot environment ... in mainline u-boot + * - block 1 for UBL (plus up to four backup copies in blocks 2..5) + * - blocks 6...? for u-boot + * - blocks 16..23 for u-boot environment ... in TI's u-boot + */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_256K + SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* Kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, + /* File system (older GIT kernels started this on the 5MB mark) */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* A few blocks at end hold a flash BBT ... created by TI's CCS + * using flashwriter_nand.out, but ignored by TI's versions of + * Linux and u-boot. We boot faster by using them. + */ +}; -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +static struct davinci_nand_pdata davinci_evm_nandflash_data = { + .parts = davinci_evm_nandflash_partition, + .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), + .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_evm_nandflash_resource[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_evm_nandflash_device = { + .name = "davinci_nand", + .id = 0, + .dev = { + .platform_data = &davinci_evm_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource), + .resource = davinci_evm_nandflash_resource, +}; + +static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device davinci_fb_device = { + .name = "davincifb", + .id = -1, + .dev = { + .dma_mask = &davinci_fb_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = 0, +}; + +static struct platform_device rtc_dev = { + .name = "rtc_davinci_evm", + .id = -1, +}; static struct resource ide_resources[] = { { @@ -131,8 +226,6 @@ static struct platform_device ide_dev = { }, }; -#endif - /*----------------------------------------------------------------------*/ /* @@ -311,7 +404,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) gpio_request(gpio + 7, "nCF_SEL"); gpio_direction_output(gpio + 7, 1); - /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ + /* irlml6401 switches over 1A, in under 8 msec; + * now it can be managed by nDRV_VBUS ... + */ setup_usb(500, 8); return 0; @@ -343,14 +438,111 @@ static struct pcf857x_platform_data pcf_data_u35 = { * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) * - ... newer boards may have more */ + static struct at24_platform_data eeprom_info = { .byte_len = (256*1024) / 8, .page_size = 64, .flags = AT24_FLAG_ADDR16, + .setup = davinci_get_mac_addr, + .context = (void *)0x7f00, +}; + +/* + * MSP430 supports RTC, card detection, input from IR remote, and + * a bit more. It triggers interrupts on GPIO(7) from pressing + * buttons on the IR remote, and for card detect switches. + */ +static struct i2c_client *dm6446evm_msp; + +static int dm6446evm_msp_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + dm6446evm_msp = client; + return 0; +} + +static int dm6446evm_msp_remove(struct i2c_client *client) +{ + dm6446evm_msp = NULL; + return 0; +} + +static const struct i2c_device_id dm6446evm_msp_ids[] = { + { "dm6446evm_msp", 0, }, + { /* end of list */ }, +}; + +static struct i2c_driver dm6446evm_msp_driver = { + .driver.name = "dm6446evm_msp", + .id_table = dm6446evm_msp_ids, + .probe = dm6446evm_msp_probe, + .remove = dm6446evm_msp_remove, +}; + +static int dm6444evm_msp430_get_pins(void) +{ + static const char txbuf[2] = { 2, 4, }; + char buf[4]; + struct i2c_msg msg[2] = { + { + .addr = dm6446evm_msp->addr, + .flags = 0, + .len = 2, + .buf = (void __force *)txbuf, + }, + { + .addr = dm6446evm_msp->addr, + .flags = I2C_M_RD, + .len = 4, + .buf = buf, + }, + }; + int status; + + if (!dm6446evm_msp) + return -ENXIO; + + /* Command 4 == get input state, returns port 2 and port3 data + * S Addr W [A] len=2 [A] cmd=4 [A] + * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P + */ + status = i2c_transfer(dm6446evm_msp->adapter, msg, 2); + if (status < 0) + return status; + + dev_dbg(&dm6446evm_msp->dev, + "PINS: %02x %02x %02x %02x\n", + buf[0], buf[1], buf[2], buf[3]); + + return (buf[3] << 8) | buf[2]; +} + +static int dm6444evm_mmc_get_cd(int module) +{ + int status = dm6444evm_msp430_get_pins(); + + return (status < 0) ? status : !(status & BIT(1)); +} + +static int dm6444evm_mmc_get_ro(int module) +{ + int status = dm6444evm_msp430_get_pins(); + + return (status < 0) ? status : status & BIT(6 + 8); +} + +static struct davinci_mmc_config dm6446evm_mmc_config = { + .get_cd = dm6444evm_mmc_get_cd, + .get_ro = dm6444evm_mmc_get_ro, + .wires = 4, + .version = MMC_CTLR_VERSION_1 }; static struct i2c_board_info __initdata i2c_info[] = { { + I2C_BOARD_INFO("dm6446evm_msp", 0x23), + }, + { I2C_BOARD_INFO("pcf8574", 0x38), .platform_data = &pcf_data_u2, }, @@ -368,7 +560,6 @@ static struct i2c_board_info __initdata i2c_info[] = { }, /* ALSO: * - tvl320aic33 audio codec (0x1b) - * - msp430 microcontroller (0x23) * - tvp5146 video decoder (0x5d) */ }; @@ -384,51 +575,114 @@ static struct davinci_i2c_platform_data i2c_pdata = { static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); + i2c_add_driver(&dm6446evm_msp_driver); i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } static struct platform_device *davinci_evm_devices[] __initdata = { -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - &davinci_evm_norflash_device, -#endif -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) - &ide_dev, -#endif + &davinci_fb_device, + &rtc_dev, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), }; static void __init davinci_evm_map_io(void) { - davinci_map_common_io(); + dm644x_init(); } -static __init void davinci_evm_init(void) +static int davinci_phy_fixup(struct phy_device *phydev) { - davinci_psc_init(); + unsigned int control; + /* CRITICAL: Fix for increasing PHY signal drive strength for + * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY + * signal strength was low causing TX to fail randomly. The + * fix is to Set bit 11 (Increased MII drive strength) of PHY + * register 26 (Digital Config register) on this phy. */ + control = phy_read(phydev, 26); + phy_write(phydev, 26, (control | 0x800)); + return 0; +} #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#define HAS_ATA 1 +#else +#define HAS_ATA 0 +#endif + #if defined(CONFIG_MTD_PHYSMAP) || \ defined(CONFIG_MTD_PHYSMAP_MODULE) - printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, " - "but share pins.\n\t Disable IDE for NOR support.\n"); +#define HAS_NOR 1 +#else +#define HAS_NOR 0 #endif + +#if defined(CONFIG_MTD_NAND_DAVINCI) || \ + defined(CONFIG_MTD_NAND_DAVINCI_MODULE) +#define HAS_NAND 1 +#else +#define HAS_NAND 0 #endif +static __init void davinci_evm_init(void) +{ + struct clk *aemif_clk; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + aemif_clk = clk_get(NULL, "aemif"); + clk_enable(aemif_clk); + + if (HAS_ATA) { + if (HAS_NAND || HAS_NOR) + pr_warning("WARNING: both IDE and Flash are " + "enabled, but they share AEMIF pins.\n" + "\tDisable IDE for NAND/NOR support.\n"); + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN); + davinci_cfg_reg(DM644X_HDIREN); + platform_device_register(&ide_dev); + } else if (HAS_NAND || HAS_NOR) { + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN_DISABLE); + + /* only one device will be jumpered and detected */ + if (HAS_NAND) { + platform_device_register(&davinci_evm_nandflash_device); + evm_leds[7].default_trigger = "nand-disk"; + if (HAS_NOR) + pr_warning("WARNING: both NAND and NOR flash " + "are enabled; disable one of them.\n"); + } else if (HAS_NOR) + platform_device_register(&davinci_evm_norflash_device); + } + platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); evm_init_i2c(); + + davinci_setup_mmc(0, &dm6446evm_mmc_config); + + davinci_serial_init(&uart_config); + + soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY; + + /* Register the fixup for PHY on DaVinci */ + phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, + davinci_phy_fixup); + } static __init void davinci_evm_irq_init(void) { - davinci_init_common_hw(); davinci_irq_init(); } -MACHINE_START(DAVINCI_EVM, "DaVinci EVM") +MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") /* Maintainer: MontaVista Software <source@mvista.com> */ .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c new file mode 100644 index 0000000..e17de63 --- /dev/null +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -0,0 +1,262 @@ +/* + * TI DaVinci DM646X EVM board + * + * Derived from: arch/arm/mach-davinci/board-evm.c + * Copyright (C) 2006 Texas Instruments. + * + * (C) 2007-2008, MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +/************************************************************************** + * Included Files + **************************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/major.h> +#include <linux/root_dev.h> +#include <linux/dma-mapping.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/i2c/pcf857x.h> +#include <linux/etherdevice.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <mach/dm646x.h> +#include <mach/common.h> +#include <mach/psc.h> +#include <mach/serial.h> +#include <mach/i2c.h> +#include <mach/mmc.h> +#include <mach/emac.h> +#include <mach/common.h> + +#define DM646X_EVM_PHY_MASK (0x2) +#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +/* LEDS */ + +static struct gpio_led evm_leds[] = { + { .name = "DS1", .active_low = 1, }, + { .name = "DS2", .active_low = 1, }, + { .name = "DS3", .active_low = 1, }, + { .name = "DS4", .active_low = 1, }, +}; + +static __initconst struct gpio_led_platform_data evm_led_data = { + .num_leds = ARRAY_SIZE(evm_leds), + .leds = evm_leds, +}; + +static struct platform_device *evm_led_dev; + +static int evm_led_setup(struct i2c_client *client, int gpio, + unsigned int ngpio, void *c) +{ + struct gpio_led *leds = evm_leds; + int status; + + while (ngpio--) { + leds->gpio = gpio++; + leds++; + }; + + evm_led_dev = platform_device_alloc("leds-gpio", 0); + platform_device_add_data(evm_led_dev, &evm_led_data, + sizeof(evm_led_data)); + + evm_led_dev->dev.parent = &client->dev; + status = platform_device_add(evm_led_dev); + if (status < 0) { + platform_device_put(evm_led_dev); + evm_led_dev = NULL; + } + return status; +} + +static int evm_led_teardown(struct i2c_client *client, int gpio, + unsigned ngpio, void *c) +{ + if (evm_led_dev) { + platform_device_unregister(evm_led_dev); + evm_led_dev = NULL; + } + return 0; +} + +static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL }; + +static int evm_sw_setup(struct i2c_client *client, int gpio, + unsigned ngpio, void *c) +{ + int status; + int i; + char label[10]; + + for (i = 0; i < 4; ++i) { + snprintf(label, 10, "user_sw%d", i); + status = gpio_request(gpio, label); + if (status) + goto out_free; + evm_sw_gpio[i] = gpio++; + + status = gpio_direction_input(evm_sw_gpio[i]); + if (status) { + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + goto out_free; + } + + status = gpio_export(evm_sw_gpio[i], 0); + if (status) { + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + goto out_free; + } + } + return status; +out_free: + for (i = 0; i < 4; ++i) { + if (evm_sw_gpio[i] != -EINVAL) { + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + } + } + return status; +} + +static int evm_sw_teardown(struct i2c_client *client, int gpio, + unsigned ngpio, void *c) +{ + int i; + + for (i = 0; i < 4; ++i) { + if (evm_sw_gpio[i] != -EINVAL) { + gpio_unexport(evm_sw_gpio[i]); + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + } + } + return 0; +} + +static int evm_pcf_setup(struct i2c_client *client, int gpio, + unsigned int ngpio, void *c) +{ + int status; + + if (ngpio < 8) + return -EINVAL; + + status = evm_sw_setup(client, gpio, 4, c); + if (status) + return status; + + return evm_led_setup(client, gpio+4, 4, c); +} + +static int evm_pcf_teardown(struct i2c_client *client, int gpio, + unsigned int ngpio, void *c) +{ + BUG_ON(ngpio < 8); + + evm_sw_teardown(client, gpio, 4, c); + evm_led_teardown(client, gpio+4, 4, c); + + return 0; +} + +static struct pcf857x_platform_data pcf_data = { + .gpio_base = DAVINCI_N_GPIO+1, + .setup = evm_pcf_setup, + .teardown = evm_pcf_teardown, +}; + +/* Most of this EEPROM is unused, but U-Boot uses some data: + * - 0x7f00, 6 bytes Ethernet Address + * - ... newer boards may have more + */ + +static struct at24_platform_data eeprom_info = { + .byte_len = (256*1024) / 8, + .page_size = 64, + .flags = AT24_FLAG_ADDR16, + .setup = davinci_get_mac_addr, + .context = (void *)0x7f00, +}; + +static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("24c256", 0x50), + .platform_data = &eeprom_info, + }, + { + I2C_BOARD_INFO("pcf8574a", 0x38), + .platform_data = &pcf_data, + }, +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 100 /* kHz */, + .bus_delay = 0 /* usec */, +}; + +static void __init evm_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); +} + +static void __init davinci_map_io(void) +{ + dm646x_init(); +} + +static __init void evm_init(void) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + + evm_init_i2c(); + davinci_serial_init(&uart_config); + + soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY; +} + +static __init void davinci_dm646x_evm_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (0x80000100), + .map_io = davinci_map_io, + .init_irq = davinci_dm646x_evm_irq_init, + .timer = &davinci_timer, + .init_machine = evm_init, +MACHINE_END + diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c new file mode 100644 index 0000000..748a8e4 --- /dev/null +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -0,0 +1,189 @@ +/* + * Lyrtech SFFSDR board support. + * + * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com> + * Copyright (C) 2008 Lyrtech <www.lyrtech.com> + * + * Based on DV-EVM platform, original copyright follows: + * + * Copyright (C) 2007 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/etherdevice.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/io.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <mach/dm644x.h> +#include <mach/common.h> +#include <mach/i2c.h> +#include <mach/serial.h> +#include <mach/psc.h> +#include <mach/mux.h> +#include <mach/common.h> + +#define SFFSDR_PHY_MASK (0x2) +#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +struct mtd_partition davinci_sffsdr_nandflash_partition[] = { + /* U-Boot Environment: Block 0 + * UBL: Block 1 + * U-Boot: Blocks 6-7 (256 kb) + * Integrity Kernel: Blocks 8-31 (3 Mb) + * Integrity Data: Blocks 100-END + */ + { + .name = "Linux Kernel", + .offset = 32 * SZ_128K, + .size = 16 * SZ_128K, /* 2 Mb */ + .mask_flags = MTD_WRITEABLE, /* Force read-only */ + }, + { + .name = "Linux ROOT", + .offset = MTDPART_OFS_APPEND, + .size = 256 * SZ_128K, /* 32 Mb */ + .mask_flags = 0, /* R/W */ + }, +}; + +static struct flash_platform_data davinci_sffsdr_nandflash_data = { + .parts = davinci_sffsdr_nandflash_partition, + .nr_parts = ARRAY_SIZE(davinci_sffsdr_nandflash_partition), +}; + +static struct resource davinci_sffsdr_nandflash_resource[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_sffsdr_nandflash_device = { + .name = "davinci_nand", /* Name of driver */ + .id = 0, + .dev = { + .platform_data = &davinci_sffsdr_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_sffsdr_nandflash_resource), + .resource = davinci_sffsdr_nandflash_resource, +}; + +static struct emac_platform_data sffsdr_emac_pdata = { + .phy_mask = SFFSDR_PHY_MASK, + .mdio_max_freq = SFFSDR_MDIO_FREQUENCY, +}; + +static struct at24_platform_data eeprom_info = { + .byte_len = (64*1024) / 8, + .page_size = 32, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("24lc64", 0x50), + .platform_data = &eeprom_info, + }, + /* Other I2C devices: + * MSP430, addr 0x23 (not used) + * PCA9543, addr 0x70 (setup done by U-Boot) + * ADS7828, addr 0x48 (ADC for voltage monitoring.) + */ +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 20 /* kHz */, + .bus_delay = 100 /* usec */, +}; + +static void __init sffsdr_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); +} + +static struct platform_device *davinci_sffsdr_devices[] __initdata = { + &davinci_sffsdr_nandflash_device, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init davinci_sffsdr_map_io(void) +{ + dm644x_init(); +} + +static __init void davinci_sffsdr_init(void) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + + platform_add_devices(davinci_sffsdr_devices, + ARRAY_SIZE(davinci_sffsdr_devices)); + sffsdr_init_i2c(); + davinci_serial_init(&uart_config); + soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY; + setup_usb(0, 0); /* We support only peripheral mode. */ + + /* mux VLYNQ pins */ + davinci_cfg_reg(DM644X_VLYNQEN); + davinci_cfg_reg(DM644X_VLYNQWD); +} + +static __init void davinci_sffsdr_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(SFFSDR, "Lyrtech SFFSDR") + /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */ + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (DAVINCI_DDR_BASE + 0x100), + .map_io = davinci_sffsdr_map_io, + .init_irq = davinci_sffsdr_irq_init, + .timer = &davinci_timer, + .init_machine = davinci_sffsdr_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index abb92b7..39bf321 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -1,7 +1,8 @@ /* - * TI DaVinci clock config file + * Clock and PLL control for DaVinci devices * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/errno.h> +#include <linux/clk.h> #include <linux/err.h> #include <linux/mutex.h> #include <linux/platform_device.h> @@ -21,98 +23,52 @@ #include <mach/hardware.h> #include <mach/psc.h> +#include <mach/cputype.h> #include "clock.h" -/* PLL/Reset register offsets */ -#define PLLM 0x110 - static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clockfw_lock); -static unsigned int commonrate; -static unsigned int armrate; -static unsigned int fixedrate = 27000000; /* 27 MHZ */ - -extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable); - -/* - * Returns a clock. Note that we first try to use device id on the bus - * and clock name. If this fails, we try to use clock name only. - */ -struct clk *clk_get(struct device *dev, const char *id) +static unsigned psc_domain(struct clk *clk) { - struct clk *p, *clk = ERR_PTR(-ENOENT); - int idno; - - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; - else - idno = to_platform_device(dev)->id; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(p, &clocks, node) { - if (p->id == idno && - strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - goto found; - } - } - - list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - break; - } - } - -found: - mutex_unlock(&clocks_mutex); - - return clk; + return (clk->flags & PSC_DSP) + ? DAVINCI_GPSC_DSPDOMAIN + : DAVINCI_GPSC_ARMDOMAIN; } -EXPORT_SYMBOL(clk_get); -void clk_put(struct clk *clk) +static void __clk_enable(struct clk *clk) { - if (clk && !IS_ERR(clk)) - module_put(clk->owner); -} -EXPORT_SYMBOL(clk_put); - -static int __clk_enable(struct clk *clk) -{ - if (clk->flags & ALWAYS_ENABLED) - return 0; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1); - return 0; + if (clk->parent) + __clk_enable(clk->parent); + if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) + davinci_psc_config(psc_domain(clk), clk->psc_ctlr, + clk->lpsc, 1); } static void __clk_disable(struct clk *clk) { - if (clk->usecount) + if (WARN_ON(clk->usecount == 0)) return; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0); + if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) + davinci_psc_config(psc_domain(clk), clk->psc_ctlr, + clk->lpsc, 0); + if (clk->parent) + __clk_disable(clk->parent); } int clk_enable(struct clk *clk) { unsigned long flags; - int ret = 0; if (clk == NULL || IS_ERR(clk)) return -EINVAL; - if (clk->usecount++ == 0) { - spin_lock_irqsave(&clockfw_lock, flags); - ret = __clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); - return ret; + return 0; } EXPORT_SYMBOL(clk_enable); @@ -123,11 +79,9 @@ void clk_disable(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return; - if (clk->usecount > 0 && !(--clk->usecount)) { - spin_lock_irqsave(&clockfw_lock, flags); - __clk_disable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_disable); @@ -136,7 +90,7 @@ unsigned long clk_get_rate(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_get_rate); @@ -145,7 +99,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_round_rate); @@ -164,10 +118,23 @@ int clk_register(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; + if (WARN(clk->parent && !clk->parent->rate, + "CLK: %s parent %s has no rate!\n", + clk->name, clk->parent->name)) + return -EINVAL; + mutex_lock(&clocks_mutex); - list_add(&clk->node, &clocks); + list_add_tail(&clk->node, &clocks); mutex_unlock(&clocks_mutex); + /* If rate is already set, use it */ + if (clk->rate) + return 0; + + /* Otherwise, default to parent rate */ + if (clk->parent) + clk->rate = clk->parent->rate; + return 0; } EXPORT_SYMBOL(clk_register); @@ -183,84 +150,150 @@ void clk_unregister(struct clk *clk) } EXPORT_SYMBOL(clk_unregister); -static struct clk davinci_clks[] = { - { - .name = "ARMCLK", - .rate = &armrate, - .lpsc = -1, - .flags = ALWAYS_ENABLED, - }, - { - .name = "UART", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_UART0, - }, - { - .name = "EMACCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, - }, - { - .name = "I2CCLK", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_I2C, - }, - { - .name = "IDECLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_ATA, - }, - { - .name = "McBSPCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_McBSP, - }, - { - .name = "MMCSDCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_MMC_SD, - }, - { - .name = "SPICLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_SPI, - }, - { - .name = "gpio", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_GPIO, - }, - { - .name = "usb", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_USB, - }, - { - .name = "AEMIFCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_AEMIF, - .usecount = 1, +#ifdef CONFIG_DAVINCI_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + + spin_lock_irq(&clockfw_lock); + list_for_each_entry(ck, &clocks, node) { + if (ck->usecount > 0) + continue; + if (!(ck->flags & CLK_PSC)) + continue; + + /* ignore if in Disabled or SwRstDisable states */ + if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc)) + continue; + + pr_info("Clocks: disable unused %s\n", ck->name); + davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0); } -}; + spin_unlock_irq(&clockfw_lock); + + return 0; +} +late_initcall(clk_disable_unused); +#endif -int __init davinci_clk_init(void) +static void clk_sysclk_recalc(struct clk *clk) { - struct clk *clkp; - int count = 0; - u32 pll_mult; - - pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM); - commonrate = ((pll_mult + 1) * 27000000) / 6; - armrate = ((pll_mult + 1) * 27000000) / 2; - - for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks); - count++, clkp++) { - clk_register(clkp); - - /* Turn on clocks that have been enabled in the - * table above */ - if (clkp->usecount) - clk_enable(clkp); + u32 v, plldiv; + struct pll_data *pll; + + /* If this is the PLL base clock, no more calculations needed */ + if (clk->pll_data) + return; + + if (WARN_ON(!clk->parent)) + return; + + clk->rate = clk->parent->rate; + + /* Otherwise, the parent must be a PLL */ + if (WARN_ON(!clk->parent->pll_data)) + return; + + pll = clk->parent->pll_data; + + /* If pre-PLL, source clock is before the multiplier and divider(s) */ + if (clk->flags & PRE_PLL) + clk->rate = pll->input_rate; + + if (!clk->div_reg) + return; + + v = __raw_readl(pll->base + clk->div_reg); + if (v & PLLDIV_EN) { + plldiv = (v & PLLDIV_RATIO_MASK) + 1; + if (plldiv) + clk->rate /= plldiv; + } +} + +static void __init clk_pll_init(struct clk *clk) +{ + u32 ctrl, mult = 1, prediv = 1, postdiv = 1; + u8 bypass; + struct pll_data *pll = clk->pll_data; + + pll->base = IO_ADDRESS(pll->phys_base); + ctrl = __raw_readl(pll->base + PLLCTL); + clk->rate = pll->input_rate = clk->parent->rate; + + if (ctrl & PLLCTL_PLLEN) { + bypass = 0; + mult = __raw_readl(pll->base + PLLM); + mult = (mult & PLLM_PLLM_MASK) + 1; + } else + bypass = 1; + + if (pll->flags & PLL_HAS_PREDIV) { + prediv = __raw_readl(pll->base + PREDIV); + if (prediv & PLLDIV_EN) + prediv = (prediv & PLLDIV_RATIO_MASK) + 1; + else + prediv = 1; + } + + /* pre-divider is fixed, but (some?) chips won't report that */ + if (cpu_is_davinci_dm355() && pll->num == 1) + prediv = 8; + + if (pll->flags & PLL_HAS_POSTDIV) { + postdiv = __raw_readl(pll->base + POSTDIV); + if (postdiv & PLLDIV_EN) + postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1; + else + postdiv = 1; + } + + if (!bypass) { + clk->rate /= prediv; + clk->rate *= mult; + clk->rate /= postdiv; + } + + pr_debug("PLL%d: input = %lu MHz [ ", + pll->num, clk->parent->rate / 1000000); + if (bypass) + pr_debug("bypass "); + if (prediv > 1) + pr_debug("/ %d ", prediv); + if (mult > 1) + pr_debug("* %d ", mult); + if (postdiv > 1) + pr_debug("/ %d ", postdiv); + pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000); +} + +int __init davinci_clk_init(struct davinci_clk *clocks) + { + struct davinci_clk *c; + struct clk *clk; + + for (c = clocks; c->lk.clk; c++) { + clk = c->lk.clk; + + if (clk->pll_data) + clk_pll_init(clk); + + /* Calculate rates for PLL-derived clocks */ + else if (clk->flags & CLK_PLL) + clk_sysclk_recalc(clk); + + if (clk->lpsc) + clk->flags |= CLK_PSC; + + clkdev_add(&c->lk); + clk_register(clk); + + /* Turn on clocks that Linux doesn't otherwise manage */ + if (clk->flags & ALWAYS_ENABLED) + clk_enable(clk); } return 0; @@ -285,12 +318,52 @@ static void davinci_ck_stop(struct seq_file *m, void *v) { } -static int davinci_ck_show(struct seq_file *m, void *v) +#define CLKNAME_MAX 10 /* longest clock name */ +#define NEST_DELTA 2 +#define NEST_MAX 4 + +static void +dump_clock(struct seq_file *s, unsigned nest, struct clk *parent) { - struct clk *cp; + char *state; + char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX]; + struct clk *clk; + unsigned i; + + if (parent->flags & CLK_PLL) + state = "pll"; + else if (parent->flags & CLK_PSC) + state = "psc"; + else + state = ""; + + /* <nest spaces> name <pad to end> */ + memset(buf, ' ', sizeof(buf) - 1); + buf[sizeof(buf) - 1] = 0; + i = strlen(parent->name); + memcpy(buf + nest, parent->name, + min(i, (unsigned)(sizeof(buf) - 1 - nest))); + + seq_printf(s, "%s users=%2d %-3s %9ld Hz\n", + buf, parent->usecount, state, clk_get_rate(parent)); + /* REVISIT show device associations too */ + + /* cost is now small, but not linear... */ + list_for_each_entry(clk, &clocks, node) { + if (clk->parent == parent) + dump_clock(s, nest + NEST_DELTA, clk); + } +} - list_for_each_entry(cp, &clocks, node) - seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount); +static int davinci_ck_show(struct seq_file *m, void *v) +{ + /* Show clock tree; we know the main oscillator is first. + * We trust nonzero usecounts equate to PSC enables... + */ + mutex_lock(&clocks_mutex); + if (!list_empty(&clocks)) + dump_clock(m, 0, list_first_entry(&clocks, struct clk, node)); + mutex_unlock(&clocks_mutex); return 0; } @@ -321,4 +394,4 @@ static int __init davinci_ck_proc_init(void) } __initcall(davinci_ck_proc_init); -#endif /* CONFIG_DEBUG_PROC_FS */ +#endif /* CONFIG_DEBUG_PROC_FS */ diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index ed47079..27233cb 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -1,7 +1,8 @@ /* * TI DaVinci clock definitions * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,23 +12,89 @@ #ifndef __ARCH_ARM_DAVINCI_CLOCK_H #define __ARCH_ARM_DAVINCI_CLOCK_H +#include <linux/list.h> +#include <asm/clkdev.h> + +#define DAVINCI_PLL1_BASE 0x01c40800 +#define DAVINCI_PLL2_BASE 0x01c40c00 +#define MAX_PLL 2 + +/* PLL/Reset register offsets */ +#define PLLCTL 0x100 +#define PLLCTL_PLLEN BIT(0) +#define PLLCTL_CLKMODE BIT(8) + +#define PLLM 0x110 +#define PLLM_PLLM_MASK 0xff + +#define PREDIV 0x114 +#define PLLDIV1 0x118 +#define PLLDIV2 0x11c +#define PLLDIV3 0x120 +#define POSTDIV 0x128 +#define BPDIV 0x12c +#define PLLCMD 0x138 +#define PLLSTAT 0x13c +#define PLLALNCTL 0x140 +#define PLLDCHANGE 0x144 +#define PLLCKEN 0x148 +#define PLLCKSTAT 0x14c +#define PLLSYSTAT 0x150 +#define PLLDIV4 0x160 +#define PLLDIV5 0x164 +#define PLLDIV6 0x168 +#define PLLDIV7 0x16c +#define PLLDIV8 0x170 +#define PLLDIV9 0x174 +#define PLLDIV_EN BIT(15) +#define PLLDIV_RATIO_MASK 0x1f + +struct pll_data { + u32 phys_base; + void __iomem *base; + u32 num; + u32 flags; + u32 input_rate; +}; +#define PLL_HAS_PREDIV 0x01 +#define PLL_HAS_POSTDIV 0x02 + struct clk { struct list_head node; struct module *owner; const char *name; - unsigned int *rate; - int id; - __s8 usecount; - __u8 flags; - __u8 lpsc; + unsigned long rate; + u8 usecount; + u8 flags; + u8 lpsc; + u8 psc_ctlr; + struct clk *parent; + struct pll_data *pll_data; + u32 div_reg; }; /* Clock flags */ -#define RATE_CKCTL 1 -#define RATE_FIXED 2 -#define RATE_PROPAGATES 4 -#define VIRTUAL_CLOCK 8 -#define ALWAYS_ENABLED 16 -#define ENABLE_REG_32BIT 32 +#define ALWAYS_ENABLED BIT(1) +#define CLK_PSC BIT(2) +#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */ +#define CLK_PLL BIT(4) /* PLL-derived clock */ +#define PRE_PLL BIT(5) /* source is before PLL mult/div */ + +struct davinci_clk { + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck) \ + { \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +int davinci_clk_init(struct davinci_clk *clocks); + +extern struct platform_device davinci_wdt_device; #endif diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c new file mode 100644 index 0000000..61ede19 --- /dev/null +++ b/arch/arm/mach-davinci/common.c @@ -0,0 +1,108 @@ +/* + * Code commons to all DaVinci SoCs. + * + * Author: Mark A. Greer <mgreer@mvista.com> + * + * 2009 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/module.h> +#include <linux/io.h> +#include <linux/etherdevice.h> + +#include <asm/tlb.h> +#include <asm/mach/map.h> + +#include <mach/common.h> +#include <mach/cputype.h> +#include <mach/emac.h> + +#include "clock.h" + +struct davinci_soc_info davinci_soc_info; +EXPORT_SYMBOL(davinci_soc_info); + +void __iomem *davinci_intc_base; +int davinci_intc_type; + +void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context) +{ + char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; + off_t offset = (off_t)context; + + /* Read MAC addr from EEPROM */ + if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN) + pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); +} + +static struct davinci_id * __init davinci_get_id(u32 jtag_id) +{ + int i; + struct davinci_id *dip; + u8 variant = (jtag_id & 0xf0000000) >> 28; + u16 part_no = (jtag_id & 0x0ffff000) >> 12; + + for (i = 0, dip = davinci_soc_info.ids; i < davinci_soc_info.ids_num; + i++, dip++) + /* Don't care about the manufacturer right now */ + if ((dip->part_no == part_no) && (dip->variant == variant)) + return dip; + + return NULL; +} + +void __init davinci_common_init(struct davinci_soc_info *soc_info) +{ + int ret; + struct davinci_id *dip; + + if (!soc_info) { + ret = -EINVAL; + goto err; + } + + memcpy(&davinci_soc_info, soc_info, sizeof(struct davinci_soc_info)); + + if (davinci_soc_info.io_desc && (davinci_soc_info.io_desc_num > 0)) + iotable_init(davinci_soc_info.io_desc, + davinci_soc_info.io_desc_num); + + /* + * Normally devicemaps_init() would flush caches and tlb after + * mdesc->map_io(), but we must also do it here because of the CPU + * revision check below. + */ + local_flush_tlb_all(); + flush_cache_all(); + + /* + * We want to check CPU revision early for cpu_is_xxxx() macros. + * IO space mapping must be initialized before we can do that. + */ + davinci_soc_info.jtag_id = __raw_readl(davinci_soc_info.jtag_id_base); + + dip = davinci_get_id(davinci_soc_info.jtag_id); + if (!dip) { + ret = -EINVAL; + goto err; + } + + davinci_soc_info.cpu_id = dip->cpu_id; + pr_info("DaVinci %s variant 0x%x\n", dip->name, dip->variant); + + if (davinci_soc_info.cpu_clks) { + ret = davinci_clk_init(davinci_soc_info.cpu_clks); + + if (ret != 0) + goto err; + } + + davinci_intc_base = davinci_soc_info.intc_base; + davinci_intc_type = davinci_soc_info.intc_type; + return; + +err: + pr_err("davinci_common_init: SoC Initialization failed\n"); +} diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c new file mode 100644 index 0000000..96c8e97 --- /dev/null +++ b/arch/arm/mach-davinci/cp_intc.c @@ -0,0 +1,161 @@ +/* + * TI Common Platform Interrupt Controller (cp_intc) driver + * + * Author: Steve Chen <schen@mvista.com> + * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <mach/cp_intc.h> + +static void __iomem *cp_intc_base; + +static inline unsigned int cp_intc_read(unsigned offset) +{ + return __raw_readl(cp_intc_base + offset); +} + +static inline void cp_intc_write(unsigned long value, unsigned offset) +{ + __raw_writel(value, cp_intc_base + offset); +} + +static void cp_intc_ack_irq(unsigned int irq) +{ + cp_intc_write(irq, CP_INTC_SYS_STAT_IDX_CLR); +} + +/* Disable interrupt */ +static void cp_intc_mask_irq(unsigned int irq) +{ + /* XXX don't know why we need to disable nIRQ here... */ + cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR); + cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_CLR); + cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET); +} + +/* Enable interrupt */ +static void cp_intc_unmask_irq(unsigned int irq) +{ + cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_SET); +} + +static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type) +{ + unsigned reg = BIT_WORD(irq); + unsigned mask = BIT_MASK(irq); + unsigned polarity = cp_intc_read(CP_INTC_SYS_POLARITY(reg)); + unsigned type = cp_intc_read(CP_INTC_SYS_TYPE(reg)); + + switch (flow_type) { + case IRQ_TYPE_EDGE_RISING: + polarity |= mask; + type |= mask; + break; + case IRQ_TYPE_EDGE_FALLING: + polarity &= ~mask; + type |= mask; + break; + case IRQ_TYPE_LEVEL_HIGH: + polarity |= mask; + type &= ~mask; + break; + case IRQ_TYPE_LEVEL_LOW: + polarity &= ~mask; + type &= ~mask; + break; + default: + return -EINVAL; + } + + cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg)); + cp_intc_write(type, CP_INTC_SYS_TYPE(reg)); + + return 0; +} + +static struct irq_chip cp_intc_irq_chip = { + .name = "cp_intc", + .ack = cp_intc_ack_irq, + .mask = cp_intc_mask_irq, + .unmask = cp_intc_unmask_irq, + .set_type = cp_intc_set_irq_type, +}; + +void __init cp_intc_init(void __iomem *base, unsigned short num_irq, + u8 *irq_prio) +{ + unsigned num_reg = BITS_TO_LONGS(num_irq); + int i; + + cp_intc_base = base; + + cp_intc_write(0, CP_INTC_GLOBAL_ENABLE); + + /* Disable all host interrupts */ + cp_intc_write(0, CP_INTC_HOST_ENABLE(0)); + + /* Disable system interrupts */ + for (i = 0; i < num_reg; i++) + cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i)); + + /* Set to normal mode, no nesting, no priority hold */ + cp_intc_write(0, CP_INTC_CTRL); + cp_intc_write(0, CP_INTC_HOST_CTRL); + + /* Clear system interrupt status */ + for (i = 0; i < num_reg; i++) + cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i)); + + /* Enable nIRQ (what about nFIQ?) */ + cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET); + + /* + * Priority is determined by host channel: lower channel number has + * higher priority i.e. channel 0 has highest priority and channel 31 + * had the lowest priority. + */ + num_reg = (num_irq + 3) >> 2; /* 4 channels per register */ + if (irq_prio) { + unsigned j, k; + u32 val; + + for (k = i = 0; i < num_reg; i++) { + for (val = j = 0; j < 4; j++, k++) { + val >>= 8; + if (k < num_irq) + val |= irq_prio[k] << 24; + } + + cp_intc_write(val, CP_INTC_CHAN_MAP(i)); + } + } else { + /* + * Default everything to channel 15 if priority not specified. + * Note that channel 0-1 are mapped to nFIQ and channels 2-31 + * are mapped to nIRQ. + */ + for (i = 0; i < num_reg; i++) + cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i)); + } + + /* Set up genirq dispatching for cp_intc */ + for (i = 0; i < num_irq; i++) { + set_irq_chip(i, &cp_intc_irq_chip); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + set_irq_handler(i, handle_edge_irq); + } + + /* Enable global interrupt */ + cp_intc_write(1, CP_INTC_GLOBAL_ENABLE); +} diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 808633f..de16f34 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -21,6 +21,16 @@ #include <mach/hardware.h> #include <mach/i2c.h> #include <mach/irqs.h> +#include <mach/cputype.h> +#include <mach/mux.h> +#include <mach/edma.h> +#include <mach/mmc.h> +#include <mach/time.h> + +#define DAVINCI_I2C_BASE 0x01C21000 +#define DAVINCI_MMCSD0_BASE 0x01E10000 +#define DM355_MMCSD0_BASE 0x01E11000 +#define DM355_MMCSD1_BASE 0x01E00000 static struct resource i2c_resources[] = { { @@ -43,7 +53,215 @@ static struct platform_device davinci_i2c_device = { void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata) { + if (cpu_is_davinci_dm644x()) + davinci_cfg_reg(DM644X_I2C); + davinci_i2c_device.dev.platform_data = pdata; (void) platform_device_register(&davinci_i2c_device); } +#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) + +static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32); + +static struct resource mmcsd0_resources[] = { + { + /* different on dm355 */ + .start = DAVINCI_MMCSD0_BASE, + .end = DAVINCI_MMCSD0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + /* IRQs: MMC/SD, then SDIO */ + { + .start = IRQ_MMCINT, + .flags = IORESOURCE_IRQ, + }, { + /* different on dm355 */ + .start = IRQ_SDIOINT, + .flags = IORESOURCE_IRQ, + }, + /* DMA channels: RX, then TX */ + { + .start = DAVINCI_DMA_MMCRXEVT, + .flags = IORESOURCE_DMA, + }, { + .start = DAVINCI_DMA_MMCTXEVT, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device davinci_mmcsd0_device = { + .name = "davinci_mmc", + .id = 0, + .dev = { + .dma_mask = &mmcsd0_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(mmcsd0_resources), + .resource = mmcsd0_resources, +}; + +static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32); + +static struct resource mmcsd1_resources[] = { + { + .start = DM355_MMCSD1_BASE, + .end = DM355_MMCSD1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + /* IRQs: MMC/SD, then SDIO */ + { + .start = IRQ_DM355_MMCINT1, + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_DM355_SDIOINT1, + .flags = IORESOURCE_IRQ, + }, + /* DMA channels: RX, then TX */ + { + .start = 30, /* rx */ + .flags = IORESOURCE_DMA, + }, { + .start = 31, /* tx */ + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device davinci_mmcsd1_device = { + .name = "davinci_mmc", + .id = 1, + .dev = { + .dma_mask = &mmcsd1_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(mmcsd1_resources), + .resource = mmcsd1_resources, +}; + + +void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) +{ + struct platform_device *pdev = NULL; + + if (WARN_ON(cpu_is_davinci_dm646x())) + return; + + /* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too; + * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused. + * + * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are + * not handled right here ... + */ + switch (module) { + case 1: + if (!cpu_is_davinci_dm355()) + break; + + /* REVISIT we may not need all these pins if e.g. this + * is a hard-wired SDIO device... + */ + davinci_cfg_reg(DM355_SD1_CMD); + davinci_cfg_reg(DM355_SD1_CLK); + davinci_cfg_reg(DM355_SD1_DATA0); + davinci_cfg_reg(DM355_SD1_DATA1); + davinci_cfg_reg(DM355_SD1_DATA2); + davinci_cfg_reg(DM355_SD1_DATA3); + + pdev = &davinci_mmcsd1_device; + break; + case 0: + if (cpu_is_davinci_dm355()) { + mmcsd0_resources[0].start = DM355_MMCSD0_BASE; + mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1; + mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0; + + /* expose all 6 MMC0 signals: CLK, CMD, DATA[0..3] */ + davinci_cfg_reg(DM355_MMCSD0); + + /* enable RX EDMA */ + davinci_cfg_reg(DM355_EVT26_MMC0_RX); + } + + else if (cpu_is_davinci_dm644x()) { + /* REVISIT: should this be in board-init code? */ + void __iomem *base = + IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); + + /* Power-on 3.3V IO cells */ + __raw_writel(0, base + DM64XX_VDD3P3V_PWDN); + /*Set up the pull regiter for MMC */ + davinci_cfg_reg(DM644X_MSTK); + } + + pdev = &davinci_mmcsd0_device; + break; + } + + if (WARN_ON(!pdev)) + return; + + pdev->dev.platform_data = config; + platform_device_register(pdev); +} + +#else + +void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) +{ +} + +#endif + +/*-------------------------------------------------------------------------*/ + +static struct resource wdt_resources[] = { + { + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device davinci_wdt_device = { + .name = "watchdog", + .id = -1, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static void davinci_init_wdt(void) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + + wdt_resources[0].start = (resource_size_t)soc_info->wdt_base; + wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1; + + platform_device_register(&davinci_wdt_device); +} + +/*-------------------------------------------------------------------------*/ + +struct davinci_timer_instance davinci_timer_instance[2] = { + { + .base = IO_ADDRESS(DAVINCI_TIMER0_BASE), + .bottom_irq = IRQ_TINT0_TINT12, + .top_irq = IRQ_TINT0_TINT34, + }, + { + .base = IO_ADDRESS(DAVINCI_TIMER1_BASE), + .bottom_irq = IRQ_TINT1_TINT12, + .top_irq = IRQ_TINT1_TINT34, + }, +}; + +/*-------------------------------------------------------------------------*/ + +static int __init davinci_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + davinci_init_wdt(); + + return 0; +} +arch_initcall(davinci_init_devices); + diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c new file mode 100644 index 0000000..baaaf32 --- /dev/null +++ b/arch/arm/mach-davinci/dm355.c @@ -0,0 +1,730 @@ +/* + * TI DaVinci DM355 chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/serial_8250.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/gpio.h> + +#include <linux/spi/spi.h> + +#include <asm/mach/map.h> + +#include <mach/dm355.h> +#include <mach/clock.h> +#include <mach/cputype.h> +#include <mach/edma.h> +#include <mach/psc.h> +#include <mach/mux.h> +#include <mach/irqs.h> +#include <mach/time.h> +#include <mach/serial.h> +#include <mach/common.h> + +#include "clock.h" +#include "mux.h" + +#define DM355_UART2_BASE (IO_PHYS + 0x206000) + +/* + * Device specific clocks + */ +#define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */ + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, + .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, + .flags = PLL_HAS_PREDIV, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + /* FIXME -- crystal rate is board-specific */ + .rate = DM355_REF_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .flags = CLK_PLL, + .pll_data = &pll1_data, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk4 = { + .name = "pll1_sysclk4", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV4, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk vpss_dac_clk = { + .name = "vpss_dac", + .parent = &pll1_sysclk3, + .lpsc = DM355_LPSC_VPSS_DAC, +}; + +static struct clk vpss_master_clk = { + .name = "vpss_master", + .parent = &pll1_sysclk4, + .lpsc = DAVINCI_LPSC_VPSSMSTR, + .flags = CLK_PSC, +}; + +static struct clk vpss_slave_clk = { + .name = "vpss_slave", + .parent = &pll1_sysclk4, + .lpsc = DAVINCI_LPSC_VPSSSLV, +}; + + +static struct clk clkout1_clk = { + .name = "clkout1", + .parent = &pll1_aux_clk, + /* NOTE: clkout1 can be externally gated by muxing GPIO-18 */ +}; + +static struct clk clkout2_clk = { + .name = "clkout2", + .parent = &pll1_sysclkbp, +}; + +static struct clk pll2_clk = { + .name = "pll2", + .parent = &ref_clk, + .flags = CLK_PLL, + .pll_data = &pll2_data, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll2_sysclkbp = { + .name = "pll2_sysclkbp", + .parent = &pll2_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk clkout3_clk = { + .name = "clkout3", + .parent = &pll2_sysclkbp, + /* NOTE: clkout3 can be externally gated by muxing GPIO-16 */ +}; + +static struct clk arm_clk = { + .name = "arm_clk", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +/* + * NOT LISTED below, and not touched by Linux + * - in SyncReset state by default + * .lpsc = DAVINCI_LPSC_TPCC, + * .lpsc = DAVINCI_LPSC_TPTC0, + * .lpsc = DAVINCI_LPSC_TPTC1, + * .lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk, + * .lpsc = DAVINCI_LPSC_MEMSTICK, + * - in Enabled state by default + * .lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS, + * .lpsc = DAVINCI_LPSC_SCR2, // "bus" + * .lpsc = DAVINCI_LPSC_SCR3, // "bus" + * .lpsc = DAVINCI_LPSC_SCR4, // "bus" + * .lpsc = DAVINCI_LPSC_CROSSBAR, // "emulation" + * .lpsc = DAVINCI_LPSC_CFG27, // "test" + * .lpsc = DAVINCI_LPSC_CFG3, // "test" + * .lpsc = DAVINCI_LPSC_CFG5, // "test" + */ + +static struct clk mjcp_clk = { + .name = "mjcp", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_IMCOP, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_UART2, +}; + +static struct clk i2c_clk = { + .name = "i2c", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_I2C, +}; + +static struct clk asp0_clk = { + .name = "asp0", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_McBSP, +}; + +static struct clk asp1_clk = { + .name = "asp1", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_McBSP1, +}; + +static struct clk mmcsd0_clk = { + .name = "mmcsd0", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_MMC_SD, +}; + +static struct clk mmcsd1_clk = { + .name = "mmcsd1", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_MMC_SD1, +}; + +static struct clk spi0_clk = { + .name = "spi0", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_SPI, +}; + +static struct clk spi1_clk = { + .name = "spi1", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_SPI1, +}; + +static struct clk spi2_clk = { + .name = "spi2", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_SPI2, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_GPIO, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_AEMIF, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM0, +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM1, +}; + +static struct clk pwm2_clk = { + .name = "pwm2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM2, +}; + +static struct clk pwm3_clk = { + .name = "pwm3", + .parent = &pll1_aux_clk, + .lpsc = DM355_LPSC_PWM3, +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER2, + .usecount = 1, /* REVISIT: why cant' this be disabled? */ +}; + +static struct clk timer3_clk = { + .name = "timer3", + .parent = &pll1_aux_clk, + .lpsc = DM355_LPSC_TIMER3, +}; + +static struct clk rto_clk = { + .name = "rto", + .parent = &pll1_aux_clk, + .lpsc = DM355_LPSC_RTO, +}; + +static struct clk usb_clk = { + .name = "usb", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_USB, +}; + +static struct davinci_clk dm355_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), + CLK(NULL, "vpss_dac", &vpss_dac_clk), + CLK(NULL, "vpss_master", &vpss_master_clk), + CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK(NULL, "clkout1", &clkout1_clk), + CLK(NULL, "clkout2", &clkout2_clk), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), + CLK(NULL, "clkout3", &clkout3_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "mjcp", &mjcp_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK("soc-audio.0", NULL, &asp0_clk), + CLK("soc-audio.1", NULL, &asp1_clk), + CLK("davinci_mmc.0", NULL, &mmcsd0_clk), + CLK("davinci_mmc.1", NULL, &mmcsd1_clk), + CLK(NULL, "spi0", &spi0_clk), + CLK(NULL, "spi1", &spi1_clk), + CLK(NULL, "spi2", &spi2_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "pwm2", &pwm2_clk), + CLK(NULL, "pwm3", &pwm3_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, "timer3", &timer3_clk), + CLK(NULL, "rto", &rto_clk), + CLK(NULL, "usb", &usb_clk), + CLK(NULL, NULL, NULL), +}; + +/*----------------------------------------------------------------------*/ + +static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32); + +static struct resource dm355_spi0_resources[] = { + { + .start = 0x01c66000, + .end = 0x01c667ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DM355_SPINT0_1, + .flags = IORESOURCE_IRQ, + }, + /* Not yet used, so not included: + * IORESOURCE_IRQ: + * - IRQ_DM355_SPINT0_0 + * IORESOURCE_DMA: + * - DAVINCI_DMA_SPI_SPIX + * - DAVINCI_DMA_SPI_SPIR + */ +}; + +static struct platform_device dm355_spi0_device = { + .name = "spi_davinci", + .id = 0, + .dev = { + .dma_mask = &dm355_spi0_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(dm355_spi0_resources), + .resource = dm355_spi0_resources, +}; + +void __init dm355_init_spi0(unsigned chipselect_mask, + struct spi_board_info *info, unsigned len) +{ + /* for now, assume we need MISO */ + davinci_cfg_reg(DM355_SPI0_SDI); + + /* not all slaves will be wired up */ + if (chipselect_mask & BIT(0)) + davinci_cfg_reg(DM355_SPI0_SDENA0); + if (chipselect_mask & BIT(1)) + davinci_cfg_reg(DM355_SPI0_SDENA1); + + spi_register_board_info(info, len); + + platform_device_register(&dm355_spi0_device); +} + +/*----------------------------------------------------------------------*/ + +#define PINMUX0 0x00 +#define PINMUX1 0x04 +#define PINMUX2 0x08 +#define PINMUX3 0x0c +#define PINMUX4 0x10 +#define INTMUX 0x18 +#define EVTMUX 0x1c + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm355_pins[] = { +#ifdef CONFIG_DAVINCI_MUX +MUX_CFG(DM355, MMCSD0, 4, 2, 1, 0, false) + +MUX_CFG(DM355, SD1_CLK, 3, 6, 1, 1, false) +MUX_CFG(DM355, SD1_CMD, 3, 7, 1, 1, false) +MUX_CFG(DM355, SD1_DATA3, 3, 8, 3, 1, false) +MUX_CFG(DM355, SD1_DATA2, 3, 10, 3, 1, false) +MUX_CFG(DM355, SD1_DATA1, 3, 12, 3, 1, false) +MUX_CFG(DM355, SD1_DATA0, 3, 14, 3, 1, false) + +MUX_CFG(DM355, I2C_SDA, 3, 19, 1, 1, false) +MUX_CFG(DM355, I2C_SCL, 3, 20, 1, 1, false) + +MUX_CFG(DM355, MCBSP0_BDX, 3, 0, 1, 1, false) +MUX_CFG(DM355, MCBSP0_X, 3, 1, 1, 1, false) +MUX_CFG(DM355, MCBSP0_BFSX, 3, 2, 1, 1, false) +MUX_CFG(DM355, MCBSP0_BDR, 3, 3, 1, 1, false) +MUX_CFG(DM355, MCBSP0_R, 3, 4, 1, 1, false) +MUX_CFG(DM355, MCBSP0_BFSR, 3, 5, 1, 1, false) + +MUX_CFG(DM355, SPI0_SDI, 4, 1, 1, 0, false) +MUX_CFG(DM355, SPI0_SDENA0, 4, 0, 1, 0, false) +MUX_CFG(DM355, SPI0_SDENA1, 3, 28, 1, 1, false) + +INT_CFG(DM355, INT_EDMA_CC, 2, 1, 1, false) +INT_CFG(DM355, INT_EDMA_TC0_ERR, 3, 1, 1, false) +INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1, false) + +EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false) +EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false) +EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false) +#endif +}; + +static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM355_CCDC_VDINT0] = 2, + [IRQ_DM355_CCDC_VDINT1] = 6, + [IRQ_DM355_CCDC_VDINT2] = 6, + [IRQ_DM355_IPIPE_HST] = 6, + [IRQ_DM355_H3AINT] = 6, + [IRQ_DM355_IPIPE_SDR] = 6, + [IRQ_DM355_IPIPEIFINT] = 6, + [IRQ_DM355_OSDINT] = 7, + [IRQ_DM355_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_USBINT] = 4, + [IRQ_DM355_RTOINT] = 4, + [IRQ_DM355_UARTINT2] = 7, + [IRQ_DM355_TINT6] = 7, + [IRQ_CCINT0] = 5, /* dma */ + [IRQ_CCERRINT] = 5, /* dma */ + [IRQ_TCERRINT0] = 5, /* dma */ + [IRQ_TCERRINT] = 5, /* dma */ + [IRQ_DM355_SPINT2_1] = 7, + [IRQ_DM355_TINT7] = 4, + [IRQ_DM355_SDIOINT0] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_DM355_MMCINT1] = 7, + [IRQ_DM355_PWMINT3] = 7, + [IRQ_DDRINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM355_SDIOINT1] = 4, + [IRQ_TINT0_TINT12] = 2, /* clockevent */ + [IRQ_TINT0_TINT34] = 2, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_PWMINT2] = 7, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_DM355_SPINT0_0] = 3, + [IRQ_DM355_SPINT0_1] = 3, + [IRQ_DM355_GPIO0] = 3, + [IRQ_DM355_GPIO1] = 7, + [IRQ_DM355_GPIO2] = 4, + [IRQ_DM355_GPIO3] = 4, + [IRQ_DM355_GPIO4] = 7, + [IRQ_DM355_GPIO5] = 7, + [IRQ_DM355_GPIO6] = 7, + [IRQ_DM355_GPIO7] = 7, + [IRQ_DM355_GPIO8] = 7, + [IRQ_DM355_GPIO9] = 7, + [IRQ_DM355_GPIOBNK0] = 7, + [IRQ_DM355_GPIOBNK1] = 7, + [IRQ_DM355_GPIOBNK2] = 7, + [IRQ_DM355_GPIOBNK3] = 7, + [IRQ_DM355_GPIOBNK4] = 7, + [IRQ_DM355_GPIOBNK5] = 7, + [IRQ_DM355_GPIOBNK6] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm355_no_event[] = { + 12, 13, 24, 56, 57, + 58, 59, 60, 61, 62, + 63, + -1 +}; + +static struct edma_soc_info dm355_edma_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .noevent = dma_chan_dm355_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using (or muxing) TC*_ERR */ +}; + +static struct platform_device dm355_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm355_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ + +static struct map_desc dm355_io_desc[] = { + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = SRAM_VIRT, + .pfn = __phys_to_pfn(0x00010000), + .length = SZ_32K, + /* MT_MEMORY_NONCACHED requires supersection alignment */ + .type = MT_DEVICE, + }, +}; + +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id dm355_ids[] = { + { + .variant = 0x0, + .part_no = 0xb73b, + .manufacturer = 0x00f, + .cpu_id = DAVINCI_CPU_ID_DM355, + .name = "dm355", + }, +}; + +static void __iomem *dm355_psc_bases[] = { + IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), +}; + +/* + * T0_BOT: Timer 0, bottom: clockevent source for hrtimers + * T0_TOP: Timer 0, top : clocksource for generic timekeeping + * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) + * T1_TOP: Timer 1, top : <unused> + */ +struct davinci_timer_info dm355_timer_info = { + .timers = davinci_timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + +static struct plat_serial8250_port dm355_serial_platform_data[] = { + { + .mapbase = DAVINCI_UART0_BASE, + .irq = IRQ_UARTINT0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DM355_UART2_BASE, + .irq = IRQ_DM355_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .flags = 0 + }, +}; + +static struct platform_device dm355_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm355_serial_platform_data, + }, +}; + +static struct davinci_soc_info davinci_soc_info_dm355 = { + .io_desc = dm355_io_desc, + .io_desc_num = ARRAY_SIZE(dm355_io_desc), + .jtag_id_base = IO_ADDRESS(0x01c40028), + .ids = dm355_ids, + .ids_num = ARRAY_SIZE(dm355_ids), + .cpu_clks = dm355_clks, + .psc_bases = dm355_psc_bases, + .psc_bases_num = ARRAY_SIZE(dm355_psc_bases), + .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), + .pinmux_pins = dm355_pins, + .pinmux_pins_num = ARRAY_SIZE(dm355_pins), + .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE), + .intc_type = DAVINCI_INTC_TYPE_AINTC, + .intc_irq_prios = dm355_default_priorities, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .timer_info = &dm355_timer_info, + .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), + .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), + .gpio_num = 104, + .gpio_irq = IRQ_DM355_GPIOBNK0, + .serial_dev = &dm355_serial_device, + .sram_dma = 0x00010000, + .sram_len = SZ_32K, +}; + +void __init dm355_init(void) +{ + davinci_common_init(&davinci_soc_info_dm355); +} + +static int __init dm355_init_devices(void) +{ + if (!cpu_is_davinci_dm355()) + return 0; + + davinci_cfg_reg(DM355_INT_EDMA_CC); + platform_device_register(&dm355_edma_device); + return 0; +} +postcore_initcall(dm355_init_devices); diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c new file mode 100644 index 0000000..fb5449b3 --- /dev/null +++ b/arch/arm/mach-davinci/dm644x.c @@ -0,0 +1,657 @@ +/* + * TI DaVinci DM644x chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/serial_8250.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/mach/map.h> + +#include <mach/dm644x.h> +#include <mach/clock.h> +#include <mach/cputype.h> +#include <mach/edma.h> +#include <mach/irqs.h> +#include <mach/psc.h> +#include <mach/mux.h> +#include <mach/time.h> +#include <mach/serial.h> +#include <mach/common.h> + +#include "clock.h" +#include "mux.h" + +/* + * Device specific clocks + */ +#define DM644X_REF_FREQ 27000000 + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + .rate = DM644X_REF_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .pll_data = &pll1_data, + .flags = CLK_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk5 = { + .name = "pll1_sysclk5", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk pll2_clk = { + .name = "pll2", + .parent = &ref_clk, + .pll_data = &pll2_data, + .flags = CLK_PLL, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll2_sysclk2 = { + .name = "pll2_sysclk2", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll2_sysclkbp = { + .name = "pll2_sysclkbp", + .parent = &pll2_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk dsp_clk = { + .name = "dsp", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_GEM, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk arm_clk = { + .name = "arm", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk vicp_clk = { + .name = "vicp", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_IMCOP, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk vpss_master_clk = { + .name = "vpss_master", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSMSTR, + .flags = CLK_PSC, +}; + +static struct clk vpss_slave_clk = { + .name = "vpss_slave", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSSLV, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART2, +}; + +static struct clk emac_clk = { + .name = "emac", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, +}; + +static struct clk i2c_clk = { + .name = "i2c", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_I2C, +}; + +static struct clk ide_clk = { + .name = "ide", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_ATA, +}; + +static struct clk asp_clk = { + .name = "asp0", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_McBSP, +}; + +static struct clk mmcsd_clk = { + .name = "mmcsd", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_MMC_SD, +}; + +static struct clk spi_clk = { + .name = "spi", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_SPI, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_GPIO, +}; + +static struct clk usb_clk = { + .name = "usb", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_USB, +}; + +static struct clk vlynq_clk = { + .name = "vlynq", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_VLYNQ, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_AEMIF, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM0, +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM1, +}; + +static struct clk pwm2_clk = { + .name = "pwm2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM2, +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER2, + .usecount = 1, /* REVISIT: why cant' this be disabled? */ +}; + +struct davinci_clk dm644x_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "pll2_sysclk2", &pll2_sysclk2), + CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), + CLK(NULL, "dsp", &dsp_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "vicp", &vicp_clk), + CLK(NULL, "vpss_master", &vpss_master_clk), + CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("davinci_emac.1", NULL, &emac_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK("palm_bk3710", NULL, &ide_clk), + CLK("soc-audio.0", NULL, &asp_clk), + CLK("davinci_mmc.0", NULL, &mmcsd_clk), + CLK(NULL, "spi", &spi_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "usb", &usb_clk), + CLK(NULL, "vlynq", &vlynq_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "pwm2", &pwm2_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, NULL, NULL), +}; + +static struct emac_platform_data dm644x_emac_pdata = { + .ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET, + .ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET, + .ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET, + .mdio_reg_offset = DM644X_EMAC_MDIO_OFFSET, + .ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE, + .version = EMAC_VERSION_1, +}; + +static struct resource dm644x_emac_resources[] = { + { + .start = DM644X_EMAC_BASE, + .end = DM644X_EMAC_BASE + 0x47ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_EMACINT, + .end = IRQ_EMACINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm644x_emac_device = { + .name = "davinci_emac", + .id = 1, + .dev = { + .platform_data = &dm644x_emac_pdata, + }, + .num_resources = ARRAY_SIZE(dm644x_emac_resources), + .resource = dm644x_emac_resources, +}; + +#define PINMUX0 0x00 +#define PINMUX1 0x04 + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm644x_pins[] = { +#ifdef CONFIG_DAVINCI_MUX +MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true) +MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true) +MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true) + +MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true) + +MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true) + +MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false) + +MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false) + +MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false) + +MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true) +MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true) + +MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false) + +MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false) + +MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false) + +MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false) +MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false) +MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false) + +MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true) + +MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true) + +MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true) +MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false) +MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false) +MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true) + +MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true) + +MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true) +MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false) +#endif +}; + +/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ +static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_VDINT0] = 2, + [IRQ_VDINT1] = 6, + [IRQ_VDINT2] = 6, + [IRQ_HISTINT] = 6, + [IRQ_H3AINT] = 6, + [IRQ_PRVUINT] = 6, + [IRQ_RSZINT] = 6, + [7] = 7, + [IRQ_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_VLCDINT] = 6, + [IRQ_USBINT] = 4, + [IRQ_EMACINT] = 4, + [14] = 7, + [15] = 7, + [IRQ_CCINT0] = 5, /* dma */ + [IRQ_CCERRINT] = 5, /* dma */ + [IRQ_TCERRINT0] = 5, /* dma */ + [IRQ_TCERRINT] = 5, /* dma */ + [IRQ_PSCIN] = 7, + [21] = 7, + [IRQ_IDE] = 4, + [23] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_SDIOINT] = 7, + [28] = 7, + [IRQ_DDRINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_VLQINT] = 4, + [IRQ_TINT0_TINT12] = 2, /* clockevent */ + [IRQ_TINT0_TINT34] = 2, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_PWMINT2] = 7, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_UARTINT2] = 3, + [IRQ_SPINT0] = 3, + [IRQ_SPINT1] = 3, + [45] = 7, + [IRQ_DSP2ARM0] = 4, + [IRQ_DSP2ARM1] = 4, + [IRQ_GPIO0] = 7, + [IRQ_GPIO1] = 7, + [IRQ_GPIO2] = 7, + [IRQ_GPIO3] = 7, + [IRQ_GPIO4] = 7, + [IRQ_GPIO5] = 7, + [IRQ_GPIO6] = 7, + [IRQ_GPIO7] = 7, + [IRQ_GPIOBNK0] = 7, + [IRQ_GPIOBNK1] = 7, + [IRQ_GPIOBNK2] = 7, + [IRQ_GPIOBNK3] = 7, + [IRQ_GPIOBNK4] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm644x_no_event[] = { + 0, 1, 12, 13, 14, + 15, 25, 30, 31, 45, + 46, 47, 55, 56, 57, + 58, 59, 60, 61, 62, + 63, + -1 +}; + +static struct edma_soc_info dm644x_edma_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .noevent = dma_chan_dm644x_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using TC*_ERR */ +}; + +static struct platform_device dm644x_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm644x_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ + +static struct map_desc dm644x_io_desc[] = { + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = SRAM_VIRT, + .pfn = __phys_to_pfn(0x00008000), + .length = SZ_16K, + /* MT_MEMORY_NONCACHED requires supersection alignment */ + .type = MT_DEVICE, + }, +}; + +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id dm644x_ids[] = { + { + .variant = 0x0, + .part_no = 0xb700, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DM6446, + .name = "dm6446", + }, +}; + +static void __iomem *dm644x_psc_bases[] = { + IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), +}; + +/* + * T0_BOT: Timer 0, bottom: clockevent source for hrtimers + * T0_TOP: Timer 0, top : clocksource for generic timekeeping + * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) + * T1_TOP: Timer 1, top : <unused> + */ +struct davinci_timer_info dm644x_timer_info = { + .timers = davinci_timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + +static struct plat_serial8250_port dm644x_serial_platform_data[] = { + { + .mapbase = DAVINCI_UART0_BASE, + .irq = IRQ_UARTINT0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART2_BASE, + .irq = IRQ_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .flags = 0 + }, +}; + +static struct platform_device dm644x_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm644x_serial_platform_data, + }, +}; + +static struct davinci_soc_info davinci_soc_info_dm644x = { + .io_desc = dm644x_io_desc, + .io_desc_num = ARRAY_SIZE(dm644x_io_desc), + .jtag_id_base = IO_ADDRESS(0x01c40028), + .ids = dm644x_ids, + .ids_num = ARRAY_SIZE(dm644x_ids), + .cpu_clks = dm644x_clks, + .psc_bases = dm644x_psc_bases, + .psc_bases_num = ARRAY_SIZE(dm644x_psc_bases), + .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), + .pinmux_pins = dm644x_pins, + .pinmux_pins_num = ARRAY_SIZE(dm644x_pins), + .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE), + .intc_type = DAVINCI_INTC_TYPE_AINTC, + .intc_irq_prios = dm644x_default_priorities, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .timer_info = &dm644x_timer_info, + .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), + .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), + .gpio_num = 71, + .gpio_irq = IRQ_GPIOBNK0, + .serial_dev = &dm644x_serial_device, + .emac_pdata = &dm644x_emac_pdata, + .sram_dma = 0x00008000, + .sram_len = SZ_16K, +}; + +void __init dm644x_init(void) +{ + davinci_common_init(&davinci_soc_info_dm644x); +} + +static int __init dm644x_init_devices(void) +{ + if (!cpu_is_davinci_dm644x()) + return 0; + + platform_device_register(&dm644x_edma_device); + platform_device_register(&dm644x_emac_device); + return 0; +} +postcore_initcall(dm644x_init_devices); diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c new file mode 100644 index 0000000..334f071 --- /dev/null +++ b/arch/arm/mach-davinci/dm646x.c @@ -0,0 +1,636 @@ +/* + * TI DaVinci DM644x chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/serial_8250.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/mach/map.h> + +#include <mach/dm646x.h> +#include <mach/clock.h> +#include <mach/cputype.h> +#include <mach/edma.h> +#include <mach/irqs.h> +#include <mach/psc.h> +#include <mach/mux.h> +#include <mach/time.h> +#include <mach/serial.h> +#include <mach/common.h> + +#include "clock.h" +#include "mux.h" + +/* + * Device specific clocks + */ +#define DM646X_REF_FREQ 27000000 +#define DM646X_AUX_FREQ 24000000 + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + .rate = DM646X_REF_FREQ, +}; + +static struct clk aux_clkin = { + .name = "aux_clkin", + .rate = DM646X_AUX_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .pll_data = &pll1_data, + .flags = CLK_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk4 = { + .name = "pll1_sysclk4", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV4, +}; + +static struct clk pll1_sysclk5 = { + .name = "pll1_sysclk5", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll1_sysclk6 = { + .name = "pll1_sysclk6", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV6, +}; + +static struct clk pll1_sysclk8 = { + .name = "pll1_sysclk8", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV8, +}; + +static struct clk pll1_sysclk9 = { + .name = "pll1_sysclk9", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV9, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll2_clk = { + .name = "pll2_clk", + .parent = &ref_clk, + .pll_data = &pll2_data, + .flags = CLK_PLL, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk dsp_clk = { + .name = "dsp", + .parent = &pll1_sysclk1, + .lpsc = DM646X_LPSC_C64X_CPU, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk arm_clk = { + .name = "arm", + .parent = &pll1_sysclk2, + .lpsc = DM646X_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &aux_clkin, + .lpsc = DM646X_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &aux_clkin, + .lpsc = DM646X_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &aux_clkin, + .lpsc = DM646X_LPSC_UART2, +}; + +static struct clk i2c_clk = { + .name = "I2CCLK", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_I2C, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_GPIO, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_AEMIF, + .flags = ALWAYS_ENABLED, +}; + +static struct clk emac_clk = { + .name = "emac", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_EMAC, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_PWM0, + .usecount = 1, /* REVIST: disabling hangs system */ +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_PWM1, + .usecount = 1, /* REVIST: disabling hangs system */ +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_sysclk3, + .flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */ +}; + +static struct clk vpif0_clk = { + .name = "vpif0", + .parent = &ref_clk, + .lpsc = DM646X_LPSC_VPSSMSTR, + .flags = ALWAYS_ENABLED, +}; + +static struct clk vpif1_clk = { + .name = "vpif1", + .parent = &ref_clk, + .lpsc = DM646X_LPSC_VPSSSLV, + .flags = ALWAYS_ENABLED, +}; + +struct davinci_clk dm646x_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "aux", &aux_clkin), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk", &pll1_sysclk4), + CLK(NULL, "pll1_sysclk", &pll1_sysclk5), + CLK(NULL, "pll1_sysclk", &pll1_sysclk6), + CLK(NULL, "pll1_sysclk", &pll1_sysclk8), + CLK(NULL, "pll1_sysclk", &pll1_sysclk9), + CLK(NULL, "pll1_sysclk", &pll1_sysclkbp), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "dsp", &dsp_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK("davinci_emac.1", NULL, &emac_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, "vpif0", &vpif0_clk), + CLK(NULL, "vpif1", &vpif1_clk), + CLK(NULL, NULL, NULL), +}; + +static struct emac_platform_data dm646x_emac_pdata = { + .ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET, + .ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET, + .ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET, + .mdio_reg_offset = DM646X_EMAC_MDIO_OFFSET, + .ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE, + .version = EMAC_VERSION_2, +}; + +static struct resource dm646x_emac_resources[] = { + { + .start = DM646X_EMAC_BASE, + .end = DM646X_EMAC_BASE + 0x47ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DM646X_EMACRXTHINT, + .end = IRQ_DM646X_EMACRXTHINT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM646X_EMACRXINT, + .end = IRQ_DM646X_EMACRXINT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM646X_EMACTXINT, + .end = IRQ_DM646X_EMACTXINT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM646X_EMACMISCINT, + .end = IRQ_DM646X_EMACMISCINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm646x_emac_device = { + .name = "davinci_emac", + .id = 1, + .dev = { + .platform_data = &dm646x_emac_pdata, + }, + .num_resources = ARRAY_SIZE(dm646x_emac_resources), + .resource = dm646x_emac_resources, +}; + +#define PINMUX0 0x00 +#define PINMUX1 0x04 + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm646x_pins[] = { +#ifdef CONFIG_DAVINCI_MUX +MUX_CFG(DM646X, ATAEN, 0, 0, 1, 1, true) + +MUX_CFG(DM646X, AUDCK1, 0, 29, 1, 0, false) + +MUX_CFG(DM646X, AUDCK0, 0, 28, 1, 0, false) + +MUX_CFG(DM646X, CRGMUX, 0, 24, 7, 5, true) + +MUX_CFG(DM646X, STSOMUX_DISABLE, 0, 22, 3, 0, true) + +MUX_CFG(DM646X, STSIMUX_DISABLE, 0, 20, 3, 0, true) + +MUX_CFG(DM646X, PTSOMUX_DISABLE, 0, 18, 3, 0, true) + +MUX_CFG(DM646X, PTSIMUX_DISABLE, 0, 16, 3, 0, true) + +MUX_CFG(DM646X, STSOMUX, 0, 22, 3, 2, true) + +MUX_CFG(DM646X, STSIMUX, 0, 20, 3, 2, true) + +MUX_CFG(DM646X, PTSOMUX_PARALLEL, 0, 18, 3, 2, true) + +MUX_CFG(DM646X, PTSIMUX_PARALLEL, 0, 16, 3, 2, true) + +MUX_CFG(DM646X, PTSOMUX_SERIAL, 0, 18, 3, 3, true) + +MUX_CFG(DM646X, PTSIMUX_SERIAL, 0, 16, 3, 3, true) +#endif +}; + +static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM646X_VP_VERTINT0] = 7, + [IRQ_DM646X_VP_VERTINT1] = 7, + [IRQ_DM646X_VP_VERTINT2] = 7, + [IRQ_DM646X_VP_VERTINT3] = 7, + [IRQ_DM646X_VP_ERRINT] = 7, + [IRQ_DM646X_RESERVED_1] = 7, + [IRQ_DM646X_RESERVED_2] = 7, + [IRQ_DM646X_WDINT] = 7, + [IRQ_DM646X_CRGENINT0] = 7, + [IRQ_DM646X_CRGENINT1] = 7, + [IRQ_DM646X_TSIFINT0] = 7, + [IRQ_DM646X_TSIFINT1] = 7, + [IRQ_DM646X_VDCEINT] = 7, + [IRQ_DM646X_USBINT] = 7, + [IRQ_DM646X_USBDMAINT] = 7, + [IRQ_DM646X_PCIINT] = 7, + [IRQ_CCINT0] = 7, /* dma */ + [IRQ_CCERRINT] = 7, /* dma */ + [IRQ_TCERRINT0] = 7, /* dma */ + [IRQ_TCERRINT] = 7, /* dma */ + [IRQ_DM646X_TCERRINT2] = 7, + [IRQ_DM646X_TCERRINT3] = 7, + [IRQ_DM646X_IDE] = 7, + [IRQ_DM646X_HPIINT] = 7, + [IRQ_DM646X_EMACRXTHINT] = 7, + [IRQ_DM646X_EMACRXINT] = 7, + [IRQ_DM646X_EMACTXINT] = 7, + [IRQ_DM646X_EMACMISCINT] = 7, + [IRQ_DM646X_MCASP0TXINT] = 7, + [IRQ_DM646X_MCASP0RXINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM646X_RESERVED_3] = 7, + [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ + [IRQ_TINT0_TINT34] = 7, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_DM646X_VLQINT] = 7, + [IRQ_I2C] = 7, + [IRQ_UARTINT0] = 7, + [IRQ_UARTINT1] = 7, + [IRQ_DM646X_UARTINT2] = 7, + [IRQ_DM646X_SPINT0] = 7, + [IRQ_DM646X_SPINT1] = 7, + [IRQ_DM646X_DSP2ARMINT] = 7, + [IRQ_DM646X_RESERVED_4] = 7, + [IRQ_DM646X_PSCINT] = 7, + [IRQ_DM646X_GPIO0] = 7, + [IRQ_DM646X_GPIO1] = 7, + [IRQ_DM646X_GPIO2] = 7, + [IRQ_DM646X_GPIO3] = 7, + [IRQ_DM646X_GPIO4] = 7, + [IRQ_DM646X_GPIO5] = 7, + [IRQ_DM646X_GPIO6] = 7, + [IRQ_DM646X_GPIO7] = 7, + [IRQ_DM646X_GPIOBNK0] = 7, + [IRQ_DM646X_GPIOBNK1] = 7, + [IRQ_DM646X_GPIOBNK2] = 7, + [IRQ_DM646X_DDRINT] = 7, + [IRQ_DM646X_AEMIFINT] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm646x_no_event[] = { + 0, 1, 2, 3, 13, + 14, 15, 24, 25, 26, + 27, 30, 31, 54, 55, + 56, + -1 +}; + +static struct edma_soc_info dm646x_edma_info = { + .n_channel = 64, + .n_region = 6, /* 0-1, 4-7 */ + .n_slot = 512, + .n_tc = 4, + .noevent = dma_chan_dm646x_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc2", + .start = 0x01c10800, + .end = 0x01c10800 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc3", + .start = 0x01c10c00, + .end = 0x01c10c00 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using TC*_ERR */ +}; + +static struct platform_device dm646x_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm646x_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ + +static struct map_desc dm646x_io_desc[] = { + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = SRAM_VIRT, + .pfn = __phys_to_pfn(0x00010000), + .length = SZ_32K, + /* MT_MEMORY_NONCACHED requires supersection alignment */ + .type = MT_DEVICE, + }, +}; + +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id dm646x_ids[] = { + { + .variant = 0x0, + .part_no = 0xb770, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DM6467, + .name = "dm6467", + }, +}; + +static void __iomem *dm646x_psc_bases[] = { + IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), +}; + +/* + * T0_BOT: Timer 0, bottom: clockevent source for hrtimers + * T0_TOP: Timer 0, top : clocksource for generic timekeeping + * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) + * T1_TOP: Timer 1, top : <unused> + */ +struct davinci_timer_info dm646x_timer_info = { + .timers = davinci_timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + +static struct plat_serial8250_port dm646x_serial_platform_data[] = { + { + .mapbase = DAVINCI_UART0_BASE, + .irq = IRQ_UARTINT0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART2_BASE, + .irq = IRQ_DM646X_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .flags = 0 + }, +}; + +static struct platform_device dm646x_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm646x_serial_platform_data, + }, +}; + +static struct davinci_soc_info davinci_soc_info_dm646x = { + .io_desc = dm646x_io_desc, + .io_desc_num = ARRAY_SIZE(dm646x_io_desc), + .jtag_id_base = IO_ADDRESS(0x01c40028), + .ids = dm646x_ids, + .ids_num = ARRAY_SIZE(dm646x_ids), + .cpu_clks = dm646x_clks, + .psc_bases = dm646x_psc_bases, + .psc_bases_num = ARRAY_SIZE(dm646x_psc_bases), + .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), + .pinmux_pins = dm646x_pins, + .pinmux_pins_num = ARRAY_SIZE(dm646x_pins), + .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE), + .intc_type = DAVINCI_INTC_TYPE_AINTC, + .intc_irq_prios = dm646x_default_priorities, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .timer_info = &dm646x_timer_info, + .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), + .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), + .gpio_num = 43, /* Only 33 usable */ + .gpio_irq = IRQ_DM646X_GPIOBNK0, + .serial_dev = &dm646x_serial_device, + .emac_pdata = &dm646x_emac_pdata, + .sram_dma = 0x10010000, + .sram_len = SZ_32K, +}; + +void __init dm646x_init(void) +{ + davinci_common_init(&davinci_soc_info_dm646x); +} + +static int __init dm646x_init_devices(void) +{ + if (!cpu_is_davinci_dm646x()) + return 0; + + platform_device_register(&dm646x_edma_device); + platform_device_register(&dm646x_emac_device); + return 0; +} +postcore_initcall(dm646x_init_devices); diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c new file mode 100644 index 0000000..15e9eb1 --- /dev/null +++ b/arch/arm/mach-davinci/dma.c @@ -0,0 +1,1135 @@ +/* + * EDMA3 support for DaVinci + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/compiler.h> +#include <linux/io.h> + +#include <mach/cputype.h> +#include <mach/memory.h> +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/edma.h> +#include <mach/mux.h> + + +/* Offsets matching "struct edmacc_param" */ +#define PARM_OPT 0x00 +#define PARM_SRC 0x04 +#define PARM_A_B_CNT 0x08 +#define PARM_DST 0x0c +#define PARM_SRC_DST_BIDX 0x10 +#define PARM_LINK_BCNTRLD 0x14 +#define PARM_SRC_DST_CIDX 0x18 +#define PARM_CCNT 0x1c + +#define PARM_SIZE 0x20 + +/* Offsets for EDMA CC global channel registers and their shadows */ +#define SH_ER 0x00 /* 64 bits */ +#define SH_ECR 0x08 /* 64 bits */ +#define SH_ESR 0x10 /* 64 bits */ +#define SH_CER 0x18 /* 64 bits */ +#define SH_EER 0x20 /* 64 bits */ +#define SH_EECR 0x28 /* 64 bits */ +#define SH_EESR 0x30 /* 64 bits */ +#define SH_SER 0x38 /* 64 bits */ +#define SH_SECR 0x40 /* 64 bits */ +#define SH_IER 0x50 /* 64 bits */ +#define SH_IECR 0x58 /* 64 bits */ +#define SH_IESR 0x60 /* 64 bits */ +#define SH_IPR 0x68 /* 64 bits */ +#define SH_ICR 0x70 /* 64 bits */ +#define SH_IEVAL 0x78 +#define SH_QER 0x80 +#define SH_QEER 0x84 +#define SH_QEECR 0x88 +#define SH_QEESR 0x8c +#define SH_QSER 0x90 +#define SH_QSECR 0x94 +#define SH_SIZE 0x200 + +/* Offsets for EDMA CC global registers */ +#define EDMA_REV 0x0000 +#define EDMA_CCCFG 0x0004 +#define EDMA_QCHMAP 0x0200 /* 8 registers */ +#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */ +#define EDMA_QDMAQNUM 0x0260 +#define EDMA_QUETCMAP 0x0280 +#define EDMA_QUEPRI 0x0284 +#define EDMA_EMR 0x0300 /* 64 bits */ +#define EDMA_EMCR 0x0308 /* 64 bits */ +#define EDMA_QEMR 0x0310 +#define EDMA_QEMCR 0x0314 +#define EDMA_CCERR 0x0318 +#define EDMA_CCERRCLR 0x031c +#define EDMA_EEVAL 0x0320 +#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/ +#define EDMA_QRAE 0x0380 /* 4 registers */ +#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */ +#define EDMA_QSTAT 0x0600 /* 2 registers */ +#define EDMA_QWMTHRA 0x0620 +#define EDMA_QWMTHRB 0x0624 +#define EDMA_CCSTAT 0x0640 + +#define EDMA_M 0x1000 /* global channel registers */ +#define EDMA_ECR 0x1008 +#define EDMA_ECRH 0x100C +#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */ +#define EDMA_PARM 0x4000 /* 128 param entries */ + +#define DAVINCI_DMA_3PCC_BASE 0x01C00000 + +#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5)) + +#define EDMA_MAX_DMACH 64 +#define EDMA_MAX_PARAMENTRY 512 +#define EDMA_MAX_EVQUE 2 /* FIXME too small */ + + +/*****************************************************************************/ + +static void __iomem *edmacc_regs_base; + +static inline unsigned int edma_read(int offset) +{ + return (unsigned int)__raw_readl(edmacc_regs_base + offset); +} + +static inline void edma_write(int offset, int val) +{ + __raw_writel(val, edmacc_regs_base + offset); +} +static inline void edma_modify(int offset, unsigned and, unsigned or) +{ + unsigned val = edma_read(offset); + val &= and; + val |= or; + edma_write(offset, val); +} +static inline void edma_and(int offset, unsigned and) +{ + unsigned val = edma_read(offset); + val &= and; + edma_write(offset, val); +} +static inline void edma_or(int offset, unsigned or) +{ + unsigned val = edma_read(offset); + val |= or; + edma_write(offset, val); +} +static inline unsigned int edma_read_array(int offset, int i) +{ + return edma_read(offset + (i << 2)); +} +static inline void edma_write_array(int offset, int i, unsigned val) +{ + edma_write(offset + (i << 2), val); +} +static inline void edma_modify_array(int offset, int i, + unsigned and, unsigned or) +{ + edma_modify(offset + (i << 2), and, or); +} +static inline void edma_or_array(int offset, int i, unsigned or) +{ + edma_or(offset + (i << 2), or); +} +static inline void edma_or_array2(int offset, int i, int j, unsigned or) +{ + edma_or(offset + ((i*2 + j) << 2), or); +} +static inline void edma_write_array2(int offset, int i, int j, unsigned val) +{ + edma_write(offset + ((i*2 + j) << 2), val); +} +static inline unsigned int edma_shadow0_read(int offset) +{ + return edma_read(EDMA_SHADOW0 + offset); +} +static inline unsigned int edma_shadow0_read_array(int offset, int i) +{ + return edma_read(EDMA_SHADOW0 + offset + (i << 2)); +} +static inline void edma_shadow0_write(int offset, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset, val); +} +static inline void edma_shadow0_write_array(int offset, int i, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset + (i << 2), val); +} +static inline unsigned int edma_parm_read(int offset, int param_no) +{ + return edma_read(EDMA_PARM + offset + (param_no << 5)); +} +static inline void edma_parm_write(int offset, int param_no, unsigned val) +{ + edma_write(EDMA_PARM + offset + (param_no << 5), val); +} +static inline void edma_parm_modify(int offset, int param_no, + unsigned and, unsigned or) +{ + edma_modify(EDMA_PARM + offset + (param_no << 5), and, or); +} +static inline void edma_parm_and(int offset, int param_no, unsigned and) +{ + edma_and(EDMA_PARM + offset + (param_no << 5), and); +} +static inline void edma_parm_or(int offset, int param_no, unsigned or) +{ + edma_or(EDMA_PARM + offset + (param_no << 5), or); +} + +/*****************************************************************************/ + +/* actual number of DMA channels and slots on this silicon */ +static unsigned num_channels; +static unsigned num_slots; + +static struct dma_interrupt_data { + void (*callback)(unsigned channel, unsigned short ch_status, + void *data); + void *data; +} intr_data[EDMA_MAX_DMACH]; + +/* The edma_inuse bit for each PaRAM slot is clear unless the + * channel is in use ... by ARM or DSP, for QDMA, or whatever. + */ +static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY); + +/* The edma_noevent bit for each channel is clear unless + * it doesn't trigger DMA events on this platform. It uses a + * bit of SOC-specific initialization code. + */ +static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH); + +/* dummy param set used to (re)initialize parameter RAM slots */ +static const struct edmacc_param dummy_paramset = { + .link_bcntrld = 0xffff, + .ccnt = 1, +}; + +static const int __initconst +queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = { +/* {event queue no, TC no} */ + {0, 0}, + {1, 1}, + {-1, -1} +}; + +static const int __initconst +queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = { + /* {event queue no, Priority} */ + {0, 3}, + {1, 7}, + {-1, -1} +}; + +/*****************************************************************************/ + +static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no) +{ + int bit = (ch_no & 0x7) * 4; + + /* default to low priority queue */ + if (queue_no == EVENTQ_DEFAULT) + queue_no = EVENTQ_1; + + queue_no &= 7; + edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3), + ~(0x7 << bit), queue_no << bit); +} + +static void __init map_queue_tc(int queue_no, int tc_no) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit)); +} + +static void __init assign_priority_to_queue(int queue_no, int priority) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit)); +} + +static inline void +setup_dma_interrupt(unsigned lch, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data) +{ + if (!callback) { + edma_shadow0_write_array(SH_IECR, lch >> 5, + (1 << (lch & 0x1f))); + } + + intr_data[lch].callback = callback; + intr_data[lch].data = data; + + if (callback) { + edma_shadow0_write_array(SH_ICR, lch >> 5, + (1 << (lch & 0x1f))); + edma_shadow0_write_array(SH_IESR, lch >> 5, + (1 << (lch & 0x1f))); + } +} + +/****************************************************************************** + * + * DMA interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_irq_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_irq_handler\n"); + + if ((edma_shadow0_read_array(SH_IPR, 0) == 0) + && (edma_shadow0_read_array(SH_IPR, 1) == 0)) + return IRQ_NONE; + + while (1) { + int j; + if (edma_shadow0_read_array(SH_IPR, 0)) + j = 0; + else if (edma_shadow0_read_array(SH_IPR, 1)) + j = 1; + else + break; + dev_dbg(data, "IPR%d %08x\n", j, + edma_shadow0_read_array(SH_IPR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_shadow0_write_array(SH_ICR, j, (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, DMA_COMPLETE, + intr_data[k].data); + } + } + } + cnt++; + if (cnt > 10) + break; + } + edma_shadow0_write(SH_IEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * DMA error interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_ccerr_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_ccerr_handler\n"); + + if ((edma_read_array(EDMA_EMR, 0) == 0) && + (edma_read_array(EDMA_EMR, 1) == 0) && + (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0)) + return IRQ_NONE; + + while (1) { + int j = -1; + if (edma_read_array(EDMA_EMR, 0)) + j = 0; + else if (edma_read_array(EDMA_EMR, 1)) + j = 1; + if (j >= 0) { + dev_dbg(data, "EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_read_array(EDMA_EMR, j) & (1 << i)) { + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, 1 << i); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, + (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, + DMA_CC_ERROR, + intr_data + [k].data); + } + } + } + } else if (edma_read(EDMA_QEMR)) { + dev_dbg(data, "QEMR %02x\n", + edma_read(EDMA_QEMR)); + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_QEMR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_QEMCR, 1 << i); + edma_shadow0_write(SH_QSECR, (1 << i)); + + /* NOTE: not reported!! */ + } + } + } else if (edma_read(EDMA_CCERR)) { + dev_dbg(data, "CCERR %08x\n", + edma_read(EDMA_CCERR)); + /* FIXME: CCERR.BIT(16) ignored! much better + * to just write CCERRCLR with CCERR value... + */ + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_CCERR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_CCERRCLR, 1 << i); + + /* NOTE: not reported!! */ + } + } + } + if ((edma_read_array(EDMA_EMR, 0) == 0) + && (edma_read_array(EDMA_EMR, 1) == 0) + && (edma_read(EDMA_QEMR) == 0) + && (edma_read(EDMA_CCERR) == 0)) { + break; + } + cnt++; + if (cnt > 10) + break; + } + edma_write(EDMA_EEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * Transfer controller error interrupt handlers + * + *****************************************************************************/ + +#define tc_errs_handled false /* disabled as long as they're NOPs */ + +static irqreturn_t dma_tc0err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc0err_handler\n"); + return IRQ_HANDLED; +} + +static irqreturn_t dma_tc1err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc1err_handler\n"); + return IRQ_HANDLED; +} + +/*-----------------------------------------------------------------------*/ + +/* Resource alloc/free: dma channels, parameter RAM slots */ + +/** + * edma_alloc_channel - allocate DMA channel and paired parameter RAM + * @channel: specific channel to allocate; negative for "any unmapped channel" + * @callback: optional; to be issued on DMA completion or errors + * @data: passed to callback + * @eventq_no: an EVENTQ_* constant, used to choose which Transfer + * Controller (TC) executes requests using this channel. Use + * EVENTQ_DEFAULT unless you really need a high priority queue. + * + * This allocates a DMA channel and its associated parameter RAM slot. + * The parameter RAM is initialized to hold a dummy transfer. + * + * Normal use is to pass a specific channel number as @channel, to make + * use of hardware events mapped to that channel. When the channel will + * be used only for software triggering or event chaining, channels not + * mapped to hardware events (or mapped to unused events) are preferable. + * + * DMA transfers start from a channel using edma_start(), or by + * chaining. When the transfer described in that channel's parameter RAM + * slot completes, that slot's data may be reloaded through a link. + * + * DMA errors are only reported to the @callback associated with the + * channel driving that transfer, but transfer completion callbacks can + * be sent to another channel under control of the TCC field in + * the option word of the transfer's parameter RAM set. Drivers must not + * use DMA transfer completion callbacks for channels they did not allocate. + * (The same applies to TCC codes used in transfer chaining.) + * + * Returns the number of the channel, else negative errno. + */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, + enum dma_event_q eventq_no) +{ + if (channel < 0) { + channel = 0; + for (;;) { + channel = find_next_bit(edma_noevent, + num_channels, channel); + if (channel == num_channels) + return -ENOMEM; + if (!test_and_set_bit(channel, edma_inuse)) + break; + channel++; + } + } else if (channel >= num_channels) { + return -EINVAL; + } else if (test_and_set_bit(channel, edma_inuse)) { + return -EBUSY; + } + + /* ensure access through shadow region 0 */ + edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f)); + + /* ensure no events are pending */ + edma_stop(channel); + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + + if (callback) + setup_dma_interrupt(channel, callback, data); + + map_dmach_queue(channel, eventq_no); + + return channel; +} +EXPORT_SYMBOL(edma_alloc_channel); + + +/** + * edma_free_channel - deallocate DMA channel + * @channel: dma channel returned from edma_alloc_channel() + * + * This deallocates the DMA channel and associated parameter RAM slot + * allocated by edma_alloc_channel(). + * + * Callers are responsible for ensuring the channel is inactive, and + * will not be reactivated by linking, chaining, or software calls to + * edma_start(). + */ +void edma_free_channel(unsigned channel) +{ + if (channel >= num_channels) + return; + + setup_dma_interrupt(channel, NULL, NULL); + /* REVISIT should probably take out of shadow region 0 */ + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + clear_bit(channel, edma_inuse); +} +EXPORT_SYMBOL(edma_free_channel); + +/** + * edma_alloc_slot - allocate DMA parameter RAM + * @slot: specific slot to allocate; negative for "any unused slot" + * + * This allocates a parameter RAM slot, initializing it to hold a + * dummy transfer. Slots allocated using this routine have not been + * mapped to a hardware DMA channel, and will normally be used by + * linking to them from a slot associated with a DMA channel. + * + * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific + * slots may be allocated on behalf of DSP firmware. + * + * Returns the number of the slot, else negative errno. + */ +int edma_alloc_slot(int slot) +{ + if (slot < 0) { + slot = num_channels; + for (;;) { + slot = find_next_zero_bit(edma_inuse, + num_slots, slot); + if (slot == num_slots) + return -ENOMEM; + if (!test_and_set_bit(slot, edma_inuse)) + break; + } + } else if (slot < num_channels || slot >= num_slots) { + return -EINVAL; + } else if (test_and_set_bit(slot, edma_inuse)) { + return -EBUSY; + } + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + + return slot; +} +EXPORT_SYMBOL(edma_alloc_slot); + +/** + * edma_free_slot - deallocate DMA parameter RAM + * @slot: parameter RAM slot returned from edma_alloc_slot() + * + * This deallocates the parameter RAM slot allocated by edma_alloc_slot(). + * Callers are responsible for ensuring the slot is inactive, and will + * not be activated. + */ +void edma_free_slot(unsigned slot) +{ + if (slot < num_channels || slot >= num_slots) + return; + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + clear_bit(slot, edma_inuse); +} +EXPORT_SYMBOL(edma_free_slot); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (i) -- read/write partial slots */ + +/** + * edma_set_src - set initial DMA source address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @src_port: physical address of source (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the source address is modified during the DMA transfer + * according to edma_set_src_index(). + */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set SAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8)); + } else { + /* clear SAM */ + i &= ~SAM; + } + edma_parm_write(PARM_OPT, slot, i); + + /* set the source port address + in source register of param structure */ + edma_parm_write(PARM_SRC, slot, src_port); + } +} +EXPORT_SYMBOL(edma_set_src); + +/** + * edma_set_dest - set initial DMA destination address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @dest_port: physical address of destination (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the destination address is modified during the DMA transfer + * according to edma_set_dest_index(). + */ +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set DAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8)); + } else { + /* clear DAM */ + i &= ~DAM; + } + edma_parm_write(PARM_OPT, slot, i); + /* set the destination port address + in dest register of param structure */ + edma_parm_write(PARM_DST, slot, dest_port); + } +} +EXPORT_SYMBOL(edma_set_dest); + +/** + * edma_get_position - returns the current transfer points + * @slot: parameter RAM slot being examined + * @src: pointer to source port position + * @dst: pointer to destination port position + * + * Returns current source and destination addresses for a particular + * parameter RAM slot. Its channel should not be active when this is called. + */ +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst) +{ + struct edmacc_param temp; + + edma_read_slot(slot, &temp); + if (src != NULL) + *src = temp.src; + if (dst != NULL) + *dst = temp.dst; +} +EXPORT_SYMBOL(edma_get_position); + +/** + * edma_set_src_index - configure DMA source address indexing + * @slot: parameter RAM slot being configured + * @src_bidx: byte offset between source arrays in a frame + * @src_cidx: byte offset between source frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0xffff0000, src_bidx); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0xffff0000, src_cidx); + } +} +EXPORT_SYMBOL(edma_set_src_index); + +/** + * edma_set_dest_index - configure DMA destination address indexing + * @slot: parameter RAM slot being configured + * @dest_bidx: byte offset between destination arrays in a frame + * @dest_cidx: byte offset between destination frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0x0000ffff, dest_bidx << 16); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0x0000ffff, dest_cidx << 16); + } +} +EXPORT_SYMBOL(edma_set_dest_index); + +/** + * edma_set_transfer_params - configure DMA transfer parameters + * @slot: parameter RAM slot being configured + * @acnt: how many bytes per array (at least one) + * @bcnt: how many arrays per frame (at least one) + * @ccnt: how many frames per block (at least one) + * @bcnt_rld: used only for A-Synchronized transfers; this specifies + * the value to reload into bcnt when it decrements to zero + * @sync_mode: ASYNC or ABSYNC + * + * See the EDMA3 documentation to understand how to configure and link + * transfers using the fields in PaRAM slots. If you are not doing it + * all at once with edma_write_slot(), you will use this routine + * plus two calls each for source and destination, setting the initial + * address and saying how to index that address. + * + * An example of an A-Synchronized transfer is a serial link using a + * single word shift register. In that case, @acnt would be equal to + * that word size; the serial controller issues a DMA synchronization + * event to transfer each word, and memory access by the DMA transfer + * controller will be word-at-a-time. + * + * An example of an AB-Synchronized transfer is a device using a FIFO. + * In that case, @acnt equals the FIFO width and @bcnt equals its depth. + * The controller with the FIFO issues DMA synchronization events when + * the FIFO threshold is reached, and the DMA transfer controller will + * transfer one frame to (or from) the FIFO. It will probably use + * efficient burst modes to access memory. + */ +void edma_set_transfer_params(unsigned slot, + u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_LINK_BCNTRLD, slot, + 0x0000ffff, bcnt_rld << 16); + if (sync_mode == ASYNC) + edma_parm_and(PARM_OPT, slot, ~SYNCDIM); + else + edma_parm_or(PARM_OPT, slot, SYNCDIM); + /* Set the acount, bcount, ccount registers */ + edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt); + edma_parm_write(PARM_CCNT, slot, ccnt); + } +} +EXPORT_SYMBOL(edma_set_transfer_params); + +/** + * edma_link - link one parameter RAM slot to another + * @from: parameter RAM slot originating the link + * @to: parameter RAM slot which is the link target + * + * The originating slot should not be part of any active DMA transfer. + */ +void edma_link(unsigned from, unsigned to) +{ + if (from >= num_slots) + return; + if (to >= num_slots) + return; + edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to)); +} +EXPORT_SYMBOL(edma_link); + +/** + * edma_unlink - cut link from one parameter RAM slot + * @from: parameter RAM slot originating the link + * + * The originating slot should not be part of any active DMA transfer. + * Its link is set to 0xffff. + */ +void edma_unlink(unsigned from) +{ + if (from >= num_slots) + return; + edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff); +} +EXPORT_SYMBOL(edma_unlink); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (ii) -- read/write whole parameter sets */ + +/** + * edma_write_slot - write parameter RAM data for slot + * @slot: number of parameter RAM slot being modified + * @param: data to be written into parameter RAM slot + * + * Use this to assign all parameters of a transfer at once. This + * allows more efficient setup of transfers than issuing multiple + * calls to set up those parameters in small pieces, and provides + * complete control over all transfer options. + */ +void edma_write_slot(unsigned slot, const struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE); +} +EXPORT_SYMBOL(edma_write_slot); + +/** + * edma_read_slot - read parameter RAM data from slot + * @slot: number of parameter RAM slot being copied + * @param: where to store copy of parameter RAM data + * + * Use this to read data from a parameter RAM slot, perhaps to + * save them as a template for later reuse. + */ +void edma_read_slot(unsigned slot, struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE); +} +EXPORT_SYMBOL(edma_read_slot); + +/*-----------------------------------------------------------------------*/ + +/* Various EDMA channel control operations */ + +/** + * edma_pause - pause dma on a channel + * @channel: on which edma_start() has been called + * + * This temporarily disables EDMA hardware events on the specified channel, + * preventing them from triggering new transfers on its behalf + */ +void edma_pause(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_pause); + +/** + * edma_resume - resumes dma on a paused channel + * @channel: on which edma_pause() has been called + * + * This re-enables EDMA hardware events on the specified channel. + */ +void edma_resume(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EESR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_resume); + +/** + * edma_start - start dma on a channel + * @channel: channel being activated + * + * Channels with event associations will be triggered by their hardware + * events, and channels without such associations will be triggered by + * software. (At this writing there is no interface for using software + * triggers except with channels that don't support hardware triggers.) + * + * Returns zero on success, else negative errno. + */ +int edma_start(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + /* EDMA channels without event association */ + if (test_bit(channel, edma_noevent)) { + pr_debug("EDMA: ESR%d %08x\n", j, + edma_shadow0_read_array(SH_ESR, j)); + edma_shadow0_write_array(SH_ESR, j, mask); + return 0; + } + + /* EDMA channel with event association */ + pr_debug("EDMA: ER%d %08x\n", j, + edma_shadow0_read_array(SH_ER, j)); + /* Clear any pending error */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_shadow0_write_array(SH_EESR, j, mask); + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + return 0; + } + + return -EINVAL; +} +EXPORT_SYMBOL(edma_start); + +/** + * edma_stop - stops dma on the channel passed + * @channel: channel being deactivated + * + * When @lch is a channel, any active transfer is paused and + * all pending hardware events are cleared. The current transfer + * may not be resumed, and the channel's Parameter RAM should be + * reinitialized before being reused. + */ +void edma_stop(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, j, mask); + edma_shadow0_write_array(SH_ECR, j, mask); + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write_array(EDMA_EMCR, j, mask); + + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + + /* REVISIT: consider guarding against inappropriate event + * chaining by overwriting with dummy_paramset. + */ + } +} +EXPORT_SYMBOL(edma_stop); + +/****************************************************************************** + * + * It cleans ParamEntry qand bring back EDMA to initial state if media has + * been removed before EDMA has finished.It is usedful for removable media. + * Arguments: + * ch_no - channel no + * + * Return: zero on success, or corresponding error no on failure + * + * FIXME this should not be needed ... edma_stop() should suffice. + * + *****************************************************************************/ + +void edma_clean_channel(unsigned channel) +{ + if (channel < num_channels) { + int j = (channel >> 5); + unsigned int mask = 1 << (channel & 0x1f); + + pr_debug("EDMA: EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + edma_shadow0_write_array(SH_ECR, j, mask); + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3); + } +} +EXPORT_SYMBOL(edma_clean_channel); + +/* + * edma_clear_event - clear an outstanding event on the DMA channel + * Arguments: + * channel - channel number + */ +void edma_clear_event(unsigned channel) +{ + if (channel >= num_channels) + return; + if (channel < 32) + edma_write(EDMA_ECR, 1 << channel); + else + edma_write(EDMA_ECRH, 1 << (channel - 32)); +} +EXPORT_SYMBOL(edma_clear_event); + +/*-----------------------------------------------------------------------*/ + +static int __init edma_probe(struct platform_device *pdev) +{ + struct edma_soc_info *info = pdev->dev.platform_data; + int i; + int status; + const s8 *noevent; + int irq = 0, err_irq = 0; + struct resource *r; + resource_size_t len; + + if (!info) + return -ENODEV; + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc"); + if (!r) + return -ENODEV; + + len = r->end - r->start + 1; + + r = request_mem_region(r->start, len, r->name); + if (!r) + return -EBUSY; + + edmacc_regs_base = ioremap(r->start, len); + if (!edmacc_regs_base) { + status = -EBUSY; + goto fail1; + } + + num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH); + num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY); + + dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base); + + for (i = 0; i < num_slots; i++) + memcpy_toio(edmacc_regs_base + PARM_OFFSET(i), + &dummy_paramset, PARM_SIZE); + + noevent = info->noevent; + if (noevent) { + while (*noevent != -1) + set_bit(*noevent++, edma_noevent); + } + + irq = platform_get_irq(pdev, 0); + status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + irq, status); + goto fail; + } + + err_irq = platform_get_irq(pdev, 1); + status = request_irq(err_irq, dma_ccerr_handler, 0, + "edma_error", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + err_irq, status); + goto fail; + } + + if (tc_errs_handled) { + status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0, + "edma_tc0", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + IRQ_TCERRINT0, status); + return status; + } + status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0, + "edma_tc1", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d --> %d\n", + IRQ_TCERRINT, status); + return status; + } + } + + /* Everything lives on transfer controller 1 until otherwise specified. + * This way, long transfers on the low priority queue + * started by the codec engine will not cause audio defects. + */ + for (i = 0; i < num_channels; i++) + map_dmach_queue(i, EVENTQ_1); + + /* Event queue to TC mapping */ + for (i = 0; queue_tc_mapping[i][0] != -1; i++) + map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]); + + /* Event queue priority mapping */ + for (i = 0; queue_priority_mapping[i][0] != -1; i++) + assign_priority_to_queue(queue_priority_mapping[i][0], + queue_priority_mapping[i][1]); + + for (i = 0; i < info->n_region; i++) { + edma_write_array2(EDMA_DRAE, i, 0, 0x0); + edma_write_array2(EDMA_DRAE, i, 1, 0x0); + edma_write_array(EDMA_QRAE, i, 0x0); + } + + return 0; + +fail: + if (err_irq) + free_irq(err_irq, NULL); + if (irq) + free_irq(irq, NULL); + iounmap(edmacc_regs_base); +fail1: + release_mem_region(r->start, len); + return status; +} + + +static struct platform_driver edma_driver = { + .driver.name = "edma", +}; + +static int __init edma_init(void) +{ + return platform_driver_probe(&edma_driver, edma_probe); +} +arch_initcall(edma_init); + diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index b49e9d0..1b65321 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -20,8 +20,10 @@ #include <linux/irq.h> #include <linux/bitops.h> +#include <mach/cputype.h> #include <mach/irqs.h> #include <mach/hardware.h> +#include <mach/common.h> #include <mach/gpio.h> #include <asm/mach/irq.h> @@ -36,13 +38,13 @@ struct davinci_gpio { static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; - /* create a non-inlined version */ -static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio) +static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio) { return __gpio_to_controller(gpio); } +static int __init davinci_gpio_irq_setup(void); /*--------------------------------------------------------------------------*/ @@ -113,10 +115,24 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) static int __init davinci_gpio_setup(void) { int i, base; + unsigned ngpio; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + /* + * The gpio banks conceptually expose a segmented bitmap, + * and "ngpio" is one more than the largest zero-based + * bit index that's valid. + */ + ngpio = soc_info->gpio_num; + if (ngpio == 0) { + pr_err("GPIO setup: how many GPIOs?\n"); + return -EINVAL; + } + + if (WARN_ON(DAVINCI_N_GPIO < ngpio)) + ngpio = DAVINCI_N_GPIO; - for (i = 0, base = 0; - i < ARRAY_SIZE(chips); - i++, base += 32) { + for (i = 0, base = 0; base < ngpio; i++, base += 32) { chips[i].chip.label = "DaVinci"; chips[i].chip.direction_input = davinci_direction_in; @@ -125,7 +141,7 @@ static int __init davinci_gpio_setup(void) chips[i].chip.set = davinci_gpio_set; chips[i].chip.base = base; - chips[i].chip.ngpio = DAVINCI_N_GPIO - base; + chips[i].chip.ngpio = ngpio - base; if (chips[i].chip.ngpio > 32) chips[i].chip.ngpio = 32; @@ -134,6 +150,7 @@ static int __init davinci_gpio_setup(void) gpiochip_add(&chips[i].chip); } + davinci_gpio_irq_setup(); return 0; } pure_initcall(davinci_gpio_setup); @@ -143,11 +160,11 @@ pure_initcall(davinci_gpio_setup); * We expect irqs will normally be set up as input pins, but they can also be * used as output pins ... which is convenient for testing. * - * NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition - * to their GPIOBNK0 irq (but with a bit less overhead). But we don't have - * a good way to hook those up ... + * NOTE: The first few GPIOs also have direct INTC hookups in addition + * to their GPIOBNK0 irq, with a bit less overhead but less flexibility + * on triggering (e.g. no edge options). We don't try to use those. * - * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also + * All those INTC hookups (direct, plus several IRQ banks) can also * serve as EDMA event triggers. */ @@ -164,10 +181,15 @@ static void gpio_irq_enable(unsigned irq) { struct gpio_controller *__iomem g = get_irq_chip_data(irq); u32 mask = __gpio_mask(irq_to_gpio(irq)); + unsigned status = irq_desc[irq].status; - if (irq_desc[irq].status & IRQ_TYPE_EDGE_FALLING) + status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; + if (!status) + status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; + + if (status & IRQ_TYPE_EDGE_FALLING) __raw_writel(mask, &g->set_falling); - if (irq_desc[irq].status & IRQ_TYPE_EDGE_RISING) + if (status & IRQ_TYPE_EDGE_RISING) __raw_writel(mask, &g->set_rising); } @@ -182,10 +204,13 @@ static int gpio_irq_type(unsigned irq, unsigned trigger) irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; irq_desc[irq].status |= trigger; - __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING) - ? &g->set_falling : &g->clr_falling); - __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING) - ? &g->set_rising : &g->clr_rising); + /* don't enable the IRQ if it's currently disabled */ + if (irq_desc[irq].depth == 0) { + __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING) + ? &g->set_falling : &g->clr_falling); + __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING) + ? &g->set_rising : &g->clr_rising); + } return 0; } @@ -207,6 +232,7 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) mask <<= 16; /* temporarily mask (level sensitive) parent IRQ */ + desc->chip->mask(irq); desc->chip->ack(irq); while (1) { u32 status; @@ -235,29 +261,40 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) } /* - * NOTE: for suspend/resume, probably best to make a sysdev (and class) - * with its suspend/resume calls hooking into the results of the set_wake() + * NOTE: for suspend/resume, probably best to make a platform_device with + * suspend_late/resume_resume calls hooking into results of the set_wake() * calls ... so if no gpios are wakeup events the clock can be disabled, * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0 - * can be set appropriately for GPIOV33 pins. + * (dm6446) can be set appropriately for GPIOV33 pins. */ static int __init davinci_gpio_irq_setup(void) { unsigned gpio, irq, bank; struct clk *clk; + u32 binten = 0; + unsigned ngpio, bank_irq; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + ngpio = soc_info->gpio_num; + + bank_irq = soc_info->gpio_irq; + if (bank_irq == 0) { + printk(KERN_ERR "Don't know first GPIO bank IRQ.\n"); + return -EINVAL; + } clk = clk_get(NULL, "gpio"); if (IS_ERR(clk)) { printk(KERN_ERR "Error %ld getting gpio clock?\n", PTR_ERR(clk)); - return 0; + return PTR_ERR(clk); } - clk_enable(clk); - for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0; - gpio < DAVINCI_N_GPIO; bank++) { + for (gpio = 0, irq = gpio_to_irq(0), bank = 0; + gpio < ngpio; + bank++, bank_irq++) { struct gpio_controller *__iomem g = gpio2controller(gpio); unsigned i; @@ -265,28 +302,26 @@ static int __init davinci_gpio_irq_setup(void) __raw_writel(~0, &g->clr_rising); /* set up all irqs in this bank */ - set_irq_chained_handler(bank, gpio_irq_handler); - set_irq_chip_data(bank, g); - set_irq_data(bank, (void *)irq); + set_irq_chained_handler(bank_irq, gpio_irq_handler); + set_irq_chip_data(bank_irq, g); + set_irq_data(bank_irq, (void *)irq); - for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO; - i++, irq++, gpio++) { + for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { set_irq_chip(irq, &gpio_irqchip); set_irq_chip_data(irq, g); set_irq_handler(irq, handle_simple_irq); set_irq_flags(irq, IRQF_VALID); } + + binten |= BIT(bank); } /* BINTEN -- per-bank interrupt enable. genirq would also let these * bits be set/cleared dynamically. */ - __raw_writel(0x1f, (void *__iomem) - IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08)); + __raw_writel(binten, soc_info->gpio_base + 0x08); printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0)); return 0; } - -arch_initcall(davinci_gpio_irq_setup); diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c deleted file mode 100644 index bf067d6..0000000 --- a/arch/arm/mach-davinci/id.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Davinci CPU identification code - * - * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com> - * - * Derived from OMAP1 CPU identification code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> - -#define JTAG_ID_BASE 0x01c40028 - -struct davinci_id { - u8 variant; /* JTAG ID bits 31:28 */ - u16 part_no; /* JTAG ID bits 27:12 */ - u32 manufacturer; /* JTAG ID bits 11:1 */ - u32 type; /* Cpu id bits [31:8], cpu class bits [7:0] */ -}; - -/* Register values to detect the DaVinci version */ -static struct davinci_id davinci_ids[] __initdata = { - { - /* DM6446 */ - .part_no = 0xb700, - .variant = 0x0, - .manufacturer = 0x017, - .type = 0x64460000, - }, -}; - -/* - * Get Device Part No. from JTAG ID register - */ -static u16 __init davinci_get_part_no(void) -{ - u32 dev_id, part_no; - - dev_id = davinci_readl(JTAG_ID_BASE); - - part_no = ((dev_id >> 12) & 0xffff); - - return part_no; -} - -/* - * Get Device Revision from JTAG ID register - */ -static u8 __init davinci_get_variant(void) -{ - u32 variant; - - variant = davinci_readl(JTAG_ID_BASE); - - variant = (variant >> 28) & 0xf; - - return variant; -} - -void __init davinci_check_revision(void) -{ - int i; - u16 part_no; - u8 variant; - - part_no = davinci_get_part_no(); - variant = davinci_get_variant(); - - /* First check only the major version in a safe way */ - for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { - if (part_no == (davinci_ids[i].part_no)) { - system_rev = davinci_ids[i].type; - break; - } - } - - /* Check if we can find the dev revision */ - for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { - if (part_no == davinci_ids[i].part_no && - variant == davinci_ids[i].variant) { - system_rev = davinci_ids[i].type; - break; - } - } - - printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant); -} diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h new file mode 100644 index 0000000..e0abc43 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/asp.h @@ -0,0 +1,25 @@ +/* + * <mach/asp.h> - DaVinci Audio Serial Port support + */ +#ifndef __ASM_ARCH_DAVINCI_ASP_H +#define __ASM_ARCH_DAVINCI_ASP_H + +#include <mach/irqs.h> + +/* Bases of register banks */ +#define DAVINCI_ASP0_BASE 0x01E02000 +#define DAVINCI_ASP1_BASE 0x01E04000 + +/* EDMA channels */ +#define DAVINCI_DMA_ASP0_TX 2 +#define DAVINCI_DMA_ASP0_RX 3 +#define DAVINCI_DMA_ASP1_TX 8 +#define DAVINCI_DMA_ASP1_RX 9 + +/* Interrupts */ +#define DAVINCI_ASP0_RX_INT IRQ_MBRINT +#define DAVINCI_ASP0_TX_INT IRQ_MBXINT +#define DAVINCI_ASP1_RX_INT IRQ_MBRINT +#define DAVINCI_ASP1_TX_INT IRQ_MBXINT + +#endif /* __ASM_ARCH_DAVINCI_ASP_H */ diff --git a/arch/arm/mach-davinci/include/mach/clkdev.h b/arch/arm/mach-davinci/include/mach/clkdev.h new file mode 100644 index 0000000..730c49d --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/clkdev.h @@ -0,0 +1,13 @@ +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +static inline int __clk_get(struct clk *clk) +{ + return 1; +} + +static inline void __clk_put(struct clk *clk) +{ +} + +#endif diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h index 38bdd49..a3b0402 100644 --- a/arch/arm/mach-davinci/include/mach/clock.h +++ b/arch/arm/mach-davinci/include/mach/clock.h @@ -17,6 +17,5 @@ struct clk; extern int clk_register(struct clk *clk); extern void clk_unregister(struct clk *clk); -extern int davinci_clk_init(void); #endif diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 4b522e5..a1f03b6 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -16,7 +16,66 @@ struct sys_timer; extern struct sys_timer davinci_timer; +extern void davinci_irq_init(void); +extern void __iomem *davinci_intc_base; +extern int davinci_intc_type; + /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); +/* parameters describe VBUS sourcing for host mode */ +extern void setup_usb(unsigned mA, unsigned potpgt_msec); + +struct davinci_timer_instance { + void __iomem *base; + u32 bottom_irq; + u32 top_irq; + unsigned long cmp_off; + unsigned int cmp_irq; +}; + +struct davinci_timer_info { + struct davinci_timer_instance *timers; + unsigned int clockevent_id; + unsigned int clocksource_id; +}; + +/* SoC specific init support */ +struct davinci_soc_info { + struct map_desc *io_desc; + unsigned long io_desc_num; + u32 cpu_id; + u32 jtag_id; + void __iomem *jtag_id_base; + struct davinci_id *ids; + unsigned long ids_num; + struct davinci_clk *cpu_clks; + void __iomem **psc_bases; + unsigned long psc_bases_num; + void __iomem *pinmux_base; + const struct mux_config *pinmux_pins; + unsigned long pinmux_pins_num; + void __iomem *intc_base; + int intc_type; + u8 *intc_irq_prios; + unsigned long intc_irq_num; + struct davinci_timer_info *timer_info; + void __iomem *wdt_base; + void __iomem *gpio_base; + unsigned gpio_num; + unsigned gpio_irq; + struct platform_device *serial_dev; + struct emac_platform_data *emac_pdata; + dma_addr_t sram_dma; + unsigned sram_len; +}; + +extern struct davinci_soc_info davinci_soc_info; + +extern void davinci_common_init(struct davinci_soc_info *soc_info); + +/* standard place to map on-chip SRAMs; they *may* support DMA */ +#define SRAM_VIRT 0xfffe0000 +#define SRAM_SIZE SZ_128K + #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */ diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h new file mode 100644 index 0000000..c4d27ee --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cp_intc.h @@ -0,0 +1,57 @@ +/* + * TI Common Platform Interrupt Controller (cp_intc) definitions + * + * Author: Steve Chen <schen@mvista.com> + * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef __ASM_HARDWARE_CP_INTC_H +#define __ASM_HARDWARE_CP_INTC_H + +#define CP_INTC_REV 0x00 +#define CP_INTC_CTRL 0x04 +#define CP_INTC_HOST_CTRL 0x0C +#define CP_INTC_GLOBAL_ENABLE 0x10 +#define CP_INTC_GLOBAL_NESTING_LEVEL 0x1C +#define CP_INTC_SYS_STAT_IDX_SET 0x20 +#define CP_INTC_SYS_STAT_IDX_CLR 0x24 +#define CP_INTC_SYS_ENABLE_IDX_SET 0x28 +#define CP_INTC_SYS_ENABLE_IDX_CLR 0x2C +#define CP_INTC_GLOBAL_WAKEUP_ENABLE 0x30 +#define CP_INTC_HOST_ENABLE_IDX_SET 0x34 +#define CP_INTC_HOST_ENABLE_IDX_CLR 0x38 +#define CP_INTC_PACING_PRESCALE 0x40 +#define CP_INTC_VECTOR_BASE 0x50 +#define CP_INTC_VECTOR_SIZE 0x54 +#define CP_INTC_VECTOR_NULL 0x58 +#define CP_INTC_PRIO_IDX 0x80 +#define CP_INTC_PRIO_VECTOR 0x84 +#define CP_INTC_SECURE_ENABLE 0x90 +#define CP_INTC_SECURE_PRIO_IDX 0x94 +#define CP_INTC_PACING_PARAM(n) (0x0100 + (n << 4)) +#define CP_INTC_PACING_DEC(n) (0x0104 + (n << 4)) +#define CP_INTC_PACING_MAP(n) (0x0108 + (n << 4)) +#define CP_INTC_SYS_RAW_STAT(n) (0x0200 + (n << 2)) +#define CP_INTC_SYS_STAT_CLR(n) (0x0280 + (n << 2)) +#define CP_INTC_SYS_ENABLE_SET(n) (0x0300 + (n << 2)) +#define CP_INTC_SYS_ENABLE_CLR(n) (0x0380 + (n << 2)) +#define CP_INTC_CHAN_MAP(n) (0x0400 + (n << 2)) +#define CP_INTC_HOST_MAP(n) (0x0800 + (n << 2)) +#define CP_INTC_HOST_PRIO_IDX(n) (0x0900 + (n << 2)) +#define CP_INTC_SYS_POLARITY(n) (0x0D00 + (n << 2)) +#define CP_INTC_SYS_TYPE(n) (0x0D80 + (n << 2)) +#define CP_INTC_WAKEUP_ENABLE(n) (0x0E00 + (n << 2)) +#define CP_INTC_DEBUG_SELECT(n) (0x0F00 + (n << 2)) +#define CP_INTC_SYS_SECURE_ENABLE(n) (0x1000 + (n << 2)) +#define CP_INTC_HOST_NESTING_LEVEL(n) (0x1100 + (n << 2)) +#define CP_INTC_HOST_ENABLE(n) (0x1500 + (n << 2)) +#define CP_INTC_HOST_PRIO_VECTOR(n) (0x1600 + (n << 2)) +#define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2)) + +void __init cp_intc_init(void __iomem *base, unsigned short num_irq, + u8 *irq_prio); + +#endif /* __ASM_HARDWARE_CP_INTC_H */ diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h new file mode 100644 index 0000000..d12a5ed --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -0,0 +1,62 @@ +/* + * DaVinci CPU type detection + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * Defines the cpu_is_*() macros for runtime detection of DaVinci + * device type. In addtion, if support for a given device is not + * compiled in to the kernel, the macros return 0 so that + * resulting code can be optimized out. + * + * 2009 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef _ASM_ARCH_CPU_H +#define _ASM_ARCH_CPU_H + +#include <mach/common.h> + +struct davinci_id { + u8 variant; /* JTAG ID bits 31:28 */ + u16 part_no; /* JTAG ID bits 27:12 */ + u16 manufacturer; /* JTAG ID bits 11:1 */ + u32 cpu_id; + char *name; +}; + +/* Can use lower 16 bits of cpu id for a variant when required */ +#define DAVINCI_CPU_ID_DM6446 0x64460000 +#define DAVINCI_CPU_ID_DM6467 0x64670000 +#define DAVINCI_CPU_ID_DM355 0x03550000 + +#define IS_DAVINCI_CPU(type, id) \ +static inline int is_davinci_ ##type(void) \ +{ \ + return (davinci_soc_info.cpu_id == (id)); \ +} + +IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446) +IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467) +IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355) + +#ifdef CONFIG_ARCH_DAVINCI_DM644x +#define cpu_is_davinci_dm644x() is_davinci_dm644x() +#else +#define cpu_is_davinci_dm644x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM646x +#define cpu_is_davinci_dm646x() is_davinci_dm646x() +#else +#define cpu_is_davinci_dm646x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM355 +#define cpu_is_davinci_dm355() is_davinci_dm355() +#else +#define cpu_is_davinci_dm355() 0 +#endif + +#endif diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index e6c0f0d..de3fc21 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -9,6 +9,16 @@ * or implied. */ +/* Modifications + * Jan 2009 Chaithrika U S Added senduart, busyuart, waituart + * macros, based on debug-8250.S file + * but using 32-bit accesses required for + * some davinci devices. + */ + +#include <linux/serial_reg.h> +#define UART_SHIFT 2 + .macro addruart, rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? @@ -17,5 +27,22 @@ orr \rx, \rx, #0x00c20000 @ UART 0 .endm -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> + .macro senduart,rd,rx + str \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + .macro waituart,rd,rx +#ifdef FLOW_CONTROL +1001: ldr \rd, [\rx, #UART_MSR << UART_SHIFT] + tst \rd, #UART_MSR_CTS + beq 1001b +#endif + .endm + diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h new file mode 100644 index 0000000..54903b7 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/dm355.h @@ -0,0 +1,22 @@ +/* + * Chip specific defines for DM355 SoC + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_ARCH_DM355_H +#define __ASM_ARCH_DM355_H + +#include <mach/hardware.h> + +struct spi_board_info; + +void __init dm355_init(void); +void dm355_init_spi0(unsigned chipselect_mask, + struct spi_board_info *info, unsigned len); + +#endif /* __ASM_ARCH_DM355_H */ diff --git a/arch/arm/mach-imx/include/mach/mx1ads.h b/arch/arm/mach-davinci/include/mach/dm644x.h index def05d5..15d42b9 100644 --- a/arch/arm/mach-imx/include/mach/mx1ads.h +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -1,7 +1,8 @@ /* - * arch/arm/mach-imx/include/mach/mx1ads.h + * This file contains the processor specific definitions + * of the TI DM644x. * - * Copyright (C) 2004 Robert Schwebel, Pengutronix + * Copyright (C) 2008 Texas Instruments. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -18,19 +19,20 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ +#ifndef __ASM_ARCH_DM644X_H +#define __ASM_ARCH_DM644X_H -#ifndef __ASM_ARCH_MX1ADS_H -#define __ASM_ARCH_MX1ADS_H +#include <linux/platform_device.h> +#include <mach/hardware.h> +#include <mach/emac.h> -/* ------------------------------------------------------------------------ */ -/* Memory Map for the M9328MX1ADS (MX1ADS) Board */ -/* ------------------------------------------------------------------------ */ +#define DM644X_EMAC_BASE (0x01C80000) +#define DM644X_EMAC_CNTRL_OFFSET (0x0000) +#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000) +#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000) +#define DM644X_EMAC_MDIO_OFFSET (0x4000) +#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) -#define MX1ADS_FLASH_PHYS 0x10000000 -#define MX1ADS_FLASH_SIZE (16*1024*1024) +void __init dm644x_init(void); -#define IMX_FB_PHYS (0x0C000000 - 0x40000) - -#define CLK32 32000 - -#endif /* __ASM_ARCH_MX1ADS_H */ +#endif /* __ASM_ARCH_DM644X_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h new file mode 100644 index 0000000..1fc764c --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -0,0 +1,26 @@ +/* + * Chip specific defines for DM646x SoC + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_ARCH_DM646X_H +#define __ASM_ARCH_DM646X_H + +#include <mach/hardware.h> +#include <mach/emac.h> + +#define DM646X_EMAC_BASE (0x01C80000) +#define DM646X_EMAC_CNTRL_OFFSET (0x0000) +#define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000) +#define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000) +#define DM646X_EMAC_MDIO_OFFSET (0x4000) +#define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000) + +void __init dm646x_init(void); + +#endif /* __ASM_ARCH_DM646X_H */ diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h new file mode 100644 index 0000000..24a3792 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -0,0 +1,224 @@ +/* + * TI DAVINCI dma definitions + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * This EDMA3 programming framework exposes two basic kinds of resource: + * + * Channel Triggers transfers, usually from a hardware event but + * also manually or by "chaining" from DMA completions. + * Each channel is coupled to a Parameter RAM (PaRAM) slot. + * + * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM + * "set"), source and destination addresses, a link to a + * next PaRAM slot (if any), options for the transfer, and + * instructions for updating those addresses. There are + * more than twice as many slots as event channels. + * + * Each PaRAM set describes a sequence of transfers, either for one large + * buffer or for several discontiguous smaller buffers. An EDMA transfer + * is driven only from a channel, which performs the transfers specified + * in its PaRAM slot until there are no more transfers. When that last + * transfer completes, the "link" field may be used to reload the channel's + * PaRAM slot with a new transfer descriptor. + * + * The EDMA Channel Controller (CC) maps requests from channels into physical + * Transfer Controller (TC) requests when the channel triggers (by hardware + * or software events, or by chaining). The two physical DMA channels provided + * by the TCs are thus shared by many logical channels. + * + * DaVinci hardware also has a "QDMA" mechanism which is not currently + * supported through this interface. (DSP firmware uses it though.) + */ + +#ifndef EDMA_H_ +#define EDMA_H_ + +/* PaRAM slots are laid out like this */ +struct edmacc_param { + unsigned int opt; + unsigned int src; + unsigned int a_b_cnt; + unsigned int dst; + unsigned int src_dst_bidx; + unsigned int link_bcntrld; + unsigned int src_dst_cidx; + unsigned int ccnt; +}; + +#define CCINT0_INTERRUPT 16 +#define CCERRINT_INTERRUPT 17 +#define TCERRINT0_INTERRUPT 18 +#define TCERRINT1_INTERRUPT 19 + +/* fields in edmacc_param.opt */ +#define SAM BIT(0) +#define DAM BIT(1) +#define SYNCDIM BIT(2) +#define STATIC BIT(3) +#define EDMA_FWID (0x07 << 8) +#define TCCMODE BIT(11) +#define EDMA_TCC(t) ((t) << 12) +#define TCINTEN BIT(20) +#define ITCINTEN BIT(21) +#define TCCHEN BIT(22) +#define ITCCHEN BIT(23) + +#define TRWORD (0x7<<2) +#define PAENTRY (0x1ff<<5) + +/* Drivers should avoid using these symbolic names for dm644x + * channels, and use platform_device IORESOURCE_DMA resources + * instead. (Other DaVinci chips have different peripherals + * and thus have different DMA channel mappings.) + */ +#define DAVINCI_DMA_MCBSP_TX 2 +#define DAVINCI_DMA_MCBSP_RX 3 +#define DAVINCI_DMA_VPSS_HIST 4 +#define DAVINCI_DMA_VPSS_H3A 5 +#define DAVINCI_DMA_VPSS_PRVU 6 +#define DAVINCI_DMA_VPSS_RSZ 7 +#define DAVINCI_DMA_IMCOP_IMXINT 8 +#define DAVINCI_DMA_IMCOP_VLCDINT 9 +#define DAVINCI_DMA_IMCO_PASQINT 10 +#define DAVINCI_DMA_IMCOP_DSQINT 11 +#define DAVINCI_DMA_SPI_SPIX 16 +#define DAVINCI_DMA_SPI_SPIR 17 +#define DAVINCI_DMA_UART0_URXEVT0 18 +#define DAVINCI_DMA_UART0_UTXEVT0 19 +#define DAVINCI_DMA_UART1_URXEVT1 20 +#define DAVINCI_DMA_UART1_UTXEVT1 21 +#define DAVINCI_DMA_UART2_URXEVT2 22 +#define DAVINCI_DMA_UART2_UTXEVT2 23 +#define DAVINCI_DMA_MEMSTK_MSEVT 24 +#define DAVINCI_DMA_MMCRXEVT 26 +#define DAVINCI_DMA_MMCTXEVT 27 +#define DAVINCI_DMA_I2C_ICREVT 28 +#define DAVINCI_DMA_I2C_ICXEVT 29 +#define DAVINCI_DMA_GPIO_GPINT0 32 +#define DAVINCI_DMA_GPIO_GPINT1 33 +#define DAVINCI_DMA_GPIO_GPINT2 34 +#define DAVINCI_DMA_GPIO_GPINT3 35 +#define DAVINCI_DMA_GPIO_GPINT4 36 +#define DAVINCI_DMA_GPIO_GPINT5 37 +#define DAVINCI_DMA_GPIO_GPINT6 38 +#define DAVINCI_DMA_GPIO_GPINT7 39 +#define DAVINCI_DMA_GPIO_GPBNKINT0 40 +#define DAVINCI_DMA_GPIO_GPBNKINT1 41 +#define DAVINCI_DMA_GPIO_GPBNKINT2 42 +#define DAVINCI_DMA_GPIO_GPBNKINT3 43 +#define DAVINCI_DMA_GPIO_GPBNKINT4 44 +#define DAVINCI_DMA_TIMER0_TINT0 48 +#define DAVINCI_DMA_TIMER1_TINT1 49 +#define DAVINCI_DMA_TIMER2_TINT2 50 +#define DAVINCI_DMA_TIMER3_TINT3 51 +#define DAVINCI_DMA_PWM0 52 +#define DAVINCI_DMA_PWM1 53 +#define DAVINCI_DMA_PWM2 54 + +/*ch_status paramater of callback function possible values*/ +#define DMA_COMPLETE 1 +#define DMA_CC_ERROR 2 +#define DMA_TC1_ERROR 3 +#define DMA_TC2_ERROR 4 + +enum address_mode { + INCR = 0, + FIFO = 1 +}; + +enum fifo_width { + W8BIT = 0, + W16BIT = 1, + W32BIT = 2, + W64BIT = 3, + W128BIT = 4, + W256BIT = 5 +}; + +enum dma_event_q { + EVENTQ_0 = 0, + EVENTQ_1 = 1, + EVENTQ_DEFAULT = -1 +}; + +enum sync_dimension { + ASYNC = 0, + ABSYNC = 1 +}; + +#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ +#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ + +/* alloc/free DMA channels and their dedicated parameter RAM slots */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, enum dma_event_q); +void edma_free_channel(unsigned channel); + +/* alloc/free parameter RAM slots */ +int edma_alloc_slot(int slot); +void edma_free_slot(unsigned slot); + +/* calls that operate on part of a parameter RAM slot */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width); +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width); +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst); +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); +void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode); +void edma_link(unsigned from, unsigned to); +void edma_unlink(unsigned from); + +/* calls that operate on an entire parameter RAM slot */ +void edma_write_slot(unsigned slot, const struct edmacc_param *params); +void edma_read_slot(unsigned slot, struct edmacc_param *params); + +/* channel control operations */ +int edma_start(unsigned channel); +void edma_stop(unsigned channel); +void edma_clean_channel(unsigned channel); +void edma_clear_event(unsigned channel); +void edma_pause(unsigned channel); +void edma_resume(unsigned channel); + +/* platform_data for EDMA driver */ +struct edma_soc_info { + + /* how many dma resources of each type */ + unsigned n_channel; + unsigned n_region; + unsigned n_slot; + unsigned n_tc; + + /* list of channels with no even trigger; terminated by "-1" */ + const s8 *noevent; +}; + +#endif diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/arch/arm/mach-davinci/include/mach/emac.h new file mode 100644 index 0000000..beff4fb --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/emac.h @@ -0,0 +1,36 @@ +/* + * TI DaVinci EMAC platform support + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef _MACH_DAVINCI_EMAC_H +#define _MACH_DAVINCI_EMAC_H + +#include <linux/if_ether.h> +#include <linux/memory.h> + +struct emac_platform_data { + char mac_addr[ETH_ALEN]; + u32 ctrl_reg_offset; + u32 ctrl_mod_reg_offset; + u32 ctrl_ram_offset; + u32 mdio_reg_offset; + u32 ctrl_ram_size; + u32 phy_mask; + u32 mdio_max_freq; + u8 rmii_en; + u8 version; +}; + +enum { + EMAC_VERSION_1, /* DM644x */ + EMAC_VERSION_2, /* DM646x */ +}; + +void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context); +#endif diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index 039b84f..fbdebc7 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -15,17 +15,36 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE) + ldr \base, =davinci_intc_base + ldr \base, [\base] .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp +#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC) + ldr \tmp, =davinci_intc_type + ldr \tmp, [\tmp] + cmp \tmp, #DAVINCI_INTC_TYPE_CP_INTC + beq 1001f +#endif +#if defined(CONFIG_AINTC) ldr \tmp, [\base, #0x14] - mov \tmp, \tmp, lsr #2 + movs \tmp, \tmp, lsr #2 sub \irqnr, \tmp, #1 - cmp \tmp, #0 + b 1002f +#endif +#if defined(CONFIG_CP_INTC) +1001: ldr \irqnr, [\base, #0x80] /* get irq number */ + and \irqnr, \irqnr, #0xff /* irq is in bits 0-9 */ + mov \tmp, \irqnr, lsr #3 + and \tmp, \tmp, #0xfc + add \tmp, \tmp, #0x280 /* get the register offset */ + ldr \irqstat, [\base, \tmp] /* get the intc status */ + cmp \irqstat, #0x0 +#endif +1002: .endm .macro irq_prio_table diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index b456f07..ae07455 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -15,8 +15,11 @@ #include <linux/io.h> #include <asm-generic/gpio.h> -#include <mach/hardware.h> + #include <mach/irqs.h> +#include <mach/common.h> + +#define DAVINCI_GPIO_BASE 0x01C67000 /* * basic gpio routines @@ -26,23 +29,18 @@ * go through boot loaders. * * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are + * need to pay attention to PINMUX registers to be sure those pins are * used as gpios, not with other peripherals. * * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code should write GPIO(N) or: - * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53) - * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70) - * - * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc - * for now, that's != GPIO(N) + * and maybe for later updates, code may write GPIO(N). These may be + * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip + * may not support all the GPIOs in that range. * * GPIOs can also be on external chips, numbered after the ones built-in * to the DaVinci chip. For now, they won't be usable as IRQ sources. */ -#define GPIO(X) (X) /* 0 <= X <= 70 */ -#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */ -#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */ +#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ struct gpio_controller { u32 dir; @@ -70,13 +68,16 @@ static inline struct gpio_controller *__iomem __gpio_to_controller(unsigned gpio) { void *__iomem ptr; - - if (gpio < 32) - ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10); - else if (gpio < 64) - ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38); - else if (gpio < DAVINCI_N_GPIO) - ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60); + void __iomem *base = davinci_soc_info.gpio_base; + + if (gpio < 32 * 1) + ptr = base + 0x10; + else if (gpio < 32 * 2) + ptr = base + 0x38; + else if (gpio < 32 * 3) + ptr = base + 0x60; + else if (gpio < 32 * 4) + ptr = base + 0x88; else ptr = NULL; return ptr; @@ -143,13 +144,13 @@ static inline int gpio_to_irq(unsigned gpio) { if (gpio >= DAVINCI_N_GPIO) return -EINVAL; - return DAVINCI_N_AINTC_IRQ + gpio; + return davinci_soc_info.intc_irq_num + gpio; } static inline int irq_to_gpio(unsigned irq) { /* caller guarantees gpio_to_irq() succeeded */ - return irq - DAVINCI_N_AINTC_IRQ; + return irq - davinci_soc_info.intc_irq_num; } #endif /* __DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index a2e8969..48c7793 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -1,9 +1,9 @@ /* - * Common hardware definitions + * Hardware definitions common to all DaVinci family processors * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> + * Author: Kevin Hilman, Deep Root Systems, LLC * - * 2007 (c) MontaVista Software, Inc. This file is licensed under + * 2007 (c) Deep Root Systems, LLC. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. @@ -12,41 +12,16 @@ #define __ASM_ARCH_HARDWARE_H /* - * Base register addresses + * Before you add anything to ths file: + * + * This header is for defines common to ALL DaVinci family chips. + * Anything that is chip specific should go in <chipname>.h, + * and the chip/board init code should then explicitly include + * <chipname>.h */ -#define DAVINCI_DMA_3PCC_BASE (0x01C00000) -#define DAVINCI_DMA_3PTC0_BASE (0x01C10000) -#define DAVINCI_DMA_3PTC1_BASE (0x01C10400) -#define DAVINCI_I2C_BASE (0x01C21000) -#define DAVINCI_PWM0_BASE (0x01C22000) -#define DAVINCI_PWM1_BASE (0x01C22400) -#define DAVINCI_PWM2_BASE (0x01C22800) -#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000) -#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800) -#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00) -#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000) -#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000) -#define DAVINCI_IEEE1394_BASE (0x01C60000) -#define DAVINCI_USB_OTG_BASE (0x01C64000) -#define DAVINCI_CFC_ATA_BASE (0x01C66000) -#define DAVINCI_SPI_BASE (0x01C66800) -#define DAVINCI_GPIO_BASE (0x01C67000) -#define DAVINCI_UHPI_BASE (0x01C67800) -#define DAVINCI_VPSS_REGS_BASE (0x01C70000) -#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000) -#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000) -#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000) -#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000) -#define DAVINCI_IMCOP_BASE (0x01CC0000) -#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000) -#define DAVINCI_VLYNQ_BASE (0x01E01000) -#define DAVINCI_MCBSP_BASE (0x01E02000) -#define DAVINCI_MMC_SD_BASE (0x01E10000) -#define DAVINCI_MS_BASE (0x01E20000) -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000) -#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000) +#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 + +/* System control register offsets */ +#define DM64XX_VDD3P3V_PWDN 0x48 #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h index a48795f..2479785 100644 --- a/arch/arm/mach-davinci/include/mach/io.h +++ b/arch/arm/mach-davinci/include/mach/io.h @@ -40,22 +40,12 @@ #else #define IOMEM(x) ((void __force __iomem *)(x)) -/* - * Functions to access the DaVinci IO region - * - * NOTE: - Use davinci_read/write[bwl] for physical register addresses - * - Use __raw_read/write[bwl]() for virtual register addresses - * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses - * - DO NOT use hardcoded virtual addresses to allow changing the - * IO address space again if needed - */ -#define davinci_readb(a) __raw_readb(IO_ADDRESS(a)) -#define davinci_readw(a) __raw_readw(IO_ADDRESS(a)) -#define davinci_readl(a) __raw_readl(IO_ADDRESS(a)) +#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t) +#define __arch_iounmap(v) davinci_iounmap(v) -#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a)) -#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a)) -#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a)) +void __iomem *davinci_ioremap(unsigned long phys, size_t size, + unsigned int type); +void davinci_iounmap(volatile void __iomem *addr); #endif /* __ASSEMBLER__ */ #endif /* __ASM_ARCH_IO_H */ diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index f4c5ca6..bc5d6aa 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -30,6 +30,9 @@ /* Base address */ #define DAVINCI_ARM_INTC_BASE 0x01C48000 +#define DAVINCI_INTC_TYPE_AINTC 0 +#define DAVINCI_INTC_TYPE_CP_INTC 1 + /* Interrupt lines */ #define IRQ_VDINT0 0 #define IRQ_VDINT1 1 @@ -96,10 +99,111 @@ #define IRQ_EMUINT 63 #define DAVINCI_N_AINTC_IRQ 64 -#define DAVINCI_N_GPIO 71 +#define DAVINCI_N_GPIO 104 #define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO) #define ARCH_TIMER_IRQ IRQ_TINT1_TINT34 +/* DaVinci DM6467-specific Interrupts */ +#define IRQ_DM646X_VP_VERTINT0 0 +#define IRQ_DM646X_VP_VERTINT1 1 +#define IRQ_DM646X_VP_VERTINT2 2 +#define IRQ_DM646X_VP_VERTINT3 3 +#define IRQ_DM646X_VP_ERRINT 4 +#define IRQ_DM646X_RESERVED_1 5 +#define IRQ_DM646X_RESERVED_2 6 +#define IRQ_DM646X_WDINT 7 +#define IRQ_DM646X_CRGENINT0 8 +#define IRQ_DM646X_CRGENINT1 9 +#define IRQ_DM646X_TSIFINT0 10 +#define IRQ_DM646X_TSIFINT1 11 +#define IRQ_DM646X_VDCEINT 12 +#define IRQ_DM646X_USBINT 13 +#define IRQ_DM646X_USBDMAINT 14 +#define IRQ_DM646X_PCIINT 15 +#define IRQ_DM646X_TCERRINT2 20 +#define IRQ_DM646X_TCERRINT3 21 +#define IRQ_DM646X_IDE 22 +#define IRQ_DM646X_HPIINT 23 +#define IRQ_DM646X_EMACRXTHINT 24 +#define IRQ_DM646X_EMACRXINT 25 +#define IRQ_DM646X_EMACTXINT 26 +#define IRQ_DM646X_EMACMISCINT 27 +#define IRQ_DM646X_MCASP0TXINT 28 +#define IRQ_DM646X_MCASP0RXINT 29 +#define IRQ_DM646X_RESERVED_3 31 +#define IRQ_DM646X_MCASP1TXINT 32 +#define IRQ_DM646X_VLQINT 38 +#define IRQ_DM646X_UARTINT2 42 +#define IRQ_DM646X_SPINT0 43 +#define IRQ_DM646X_SPINT1 44 +#define IRQ_DM646X_DSP2ARMINT 45 +#define IRQ_DM646X_RESERVED_4 46 +#define IRQ_DM646X_PSCINT 47 +#define IRQ_DM646X_GPIO0 48 +#define IRQ_DM646X_GPIO1 49 +#define IRQ_DM646X_GPIO2 50 +#define IRQ_DM646X_GPIO3 51 +#define IRQ_DM646X_GPIO4 52 +#define IRQ_DM646X_GPIO5 53 +#define IRQ_DM646X_GPIO6 54 +#define IRQ_DM646X_GPIO7 55 +#define IRQ_DM646X_GPIOBNK0 56 +#define IRQ_DM646X_GPIOBNK1 57 +#define IRQ_DM646X_GPIOBNK2 58 +#define IRQ_DM646X_DDRINT 59 +#define IRQ_DM646X_AEMIFINT 60 + +/* DaVinci DM355-specific Interrupts */ +#define IRQ_DM355_CCDC_VDINT0 0 +#define IRQ_DM355_CCDC_VDINT1 1 +#define IRQ_DM355_CCDC_VDINT2 2 +#define IRQ_DM355_IPIPE_HST 3 +#define IRQ_DM355_H3AINT 4 +#define IRQ_DM355_IPIPE_SDR 5 +#define IRQ_DM355_IPIPEIFINT 6 +#define IRQ_DM355_OSDINT 7 +#define IRQ_DM355_VENCINT 8 +#define IRQ_DM355_IMCOPINT 11 +#define IRQ_DM355_RTOINT 13 +#define IRQ_DM355_TINT4 13 +#define IRQ_DM355_TINT2_TINT12 13 +#define IRQ_DM355_UARTINT2 14 +#define IRQ_DM355_TINT5 14 +#define IRQ_DM355_TINT2_TINT34 14 +#define IRQ_DM355_TINT6 15 +#define IRQ_DM355_TINT3_TINT12 15 +#define IRQ_DM355_SPINT1_0 17 +#define IRQ_DM355_SPINT1_1 18 +#define IRQ_DM355_SPINT2_0 19 +#define IRQ_DM355_SPINT2_1 21 +#define IRQ_DM355_TINT7 22 +#define IRQ_DM355_TINT3_TINT34 22 +#define IRQ_DM355_SDIOINT0 23 +#define IRQ_DM355_MMCINT0 26 +#define IRQ_DM355_MSINT 26 +#define IRQ_DM355_MMCINT1 27 +#define IRQ_DM355_PWMINT3 28 +#define IRQ_DM355_SDIOINT1 31 +#define IRQ_DM355_SPINT0_0 42 +#define IRQ_DM355_SPINT0_1 43 +#define IRQ_DM355_GPIO0 44 +#define IRQ_DM355_GPIO1 45 +#define IRQ_DM355_GPIO2 46 +#define IRQ_DM355_GPIO3 47 +#define IRQ_DM355_GPIO4 48 +#define IRQ_DM355_GPIO5 49 +#define IRQ_DM355_GPIO6 50 +#define IRQ_DM355_GPIO7 51 +#define IRQ_DM355_GPIO8 52 +#define IRQ_DM355_GPIO9 53 +#define IRQ_DM355_GPIOBNK0 54 +#define IRQ_DM355_GPIOBNK1 55 +#define IRQ_DM355_GPIOBNK2 56 +#define IRQ_DM355_GPIOBNK3 57 +#define IRQ_DM355_GPIOBNK4 58 +#define IRQ_DM355_GPIOBNK5 59 +#define IRQ_DM355_GPIOBNK6 60 + #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h index 86c25c7..c712c7c 100644 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ b/arch/arm/mach-davinci/include/mach/memory.h @@ -21,7 +21,6 @@ * Definitions **************************************************************************/ #define DAVINCI_DDR_BASE 0x80000000 -#define DAVINCI_IRAM_BASE 0x00008000 /* ARM Internal RAM */ #define PHYS_OFFSET DAVINCI_DDR_BASE diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h new file mode 100644 index 0000000..5a85e24 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/mmc.h @@ -0,0 +1,33 @@ +/* + * Board-specific MMC configuration + */ + +#ifndef _DAVINCI_MMC_H +#define _DAVINCI_MMC_H + +#include <linux/types.h> +#include <linux/mmc/host.h> + +struct davinci_mmc_config { + /* get_cd()/get_wp() may sleep */ + int (*get_cd)(int module); + int (*get_ro)(int module); + /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */ + u8 wires; + + u32 max_freq; + + /* any additional host capabilities: OR'd in to mmc->f_caps */ + u32 caps; + + /* Version of the MMC/SD controller */ + u8 version; +}; +void davinci_setup_mmc(int module, struct davinci_mmc_config *config); + +enum { + MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */ + MMC_CTLR_VERSION_2, /* DA830 */ +}; + +#endif diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index c24b678..2737845 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -1,55 +1,167 @@ /* - * DaVinci pin multiplexing defines + * Table of the DAVINCI register configurations for the PINMUX combinations * * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> * + * Based on linux/include/asm-arm/arch-omap/mux.h: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -#define DAVINCI_MUX_AEAW0 0 -#define DAVINCI_MUX_AEAW1 1 -#define DAVINCI_MUX_AEAW2 2 -#define DAVINCI_MUX_AEAW3 3 -#define DAVINCI_MUX_AEAW4 4 -#define DAVINCI_MUX_AECS4 10 -#define DAVINCI_MUX_AECS5 11 -#define DAVINCI_MUX_VLYNQWD0 12 -#define DAVINCI_MUX_VLYNQWD1 13 -#define DAVINCI_MUX_VLSCREN 14 -#define DAVINCI_MUX_VLYNQEN 15 -#define DAVINCI_MUX_HDIREN 16 -#define DAVINCI_MUX_ATAEN 17 -#define DAVINCI_MUX_RGB666 22 -#define DAVINCI_MUX_RGB888 23 -#define DAVINCI_MUX_LOEEN 24 -#define DAVINCI_MUX_LFLDEN 25 -#define DAVINCI_MUX_CWEN 26 -#define DAVINCI_MUX_CFLDEN 27 -#define DAVINCI_MUX_HPIEN 29 -#define DAVINCI_MUX_1394EN 30 -#define DAVINCI_MUX_EMACEN 31 - -#define DAVINCI_MUX_LEVEL2 32 -#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0) -#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1) -#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2) -#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3) -#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4) -#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5) -#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6) -#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7) -#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8) -#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9) -#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10) -#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16) -#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17) -#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18) - -extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable); - -#endif /* __ASM_ARCH_MUX_H */ + +#ifndef __INC_MACH_MUX_H +#define __INC_MACH_MUX_H + +struct mux_config { + const char *name; + const char *mux_reg_name; + const unsigned char mux_reg; + const unsigned char mask_offset; + const unsigned char mask; + const unsigned char mode; + bool debug; +}; + +enum davinci_dm644x_index { + /* ATA and HDDIR functions */ + DM644X_HDIREN, + DM644X_ATAEN, + DM644X_ATAEN_DISABLE, + + /* HPI functions */ + DM644X_HPIEN_DISABLE, + + /* AEAW functions */ + DM644X_AEAW, + + /* Memory Stick */ + DM644X_MSTK, + + /* I2C */ + DM644X_I2C, + + /* ASP function */ + DM644X_MCBSP, + + /* UART1 */ + DM644X_UART1, + + /* UART2 */ + DM644X_UART2, + + /* PWM0 */ + DM644X_PWM0, + + /* PWM1 */ + DM644X_PWM1, + + /* PWM2 */ + DM644X_PWM2, + + /* VLYNQ function */ + DM644X_VLYNQEN, + DM644X_VLSCREN, + DM644X_VLYNQWD, + + /* EMAC and MDIO function */ + DM644X_EMACEN, + + /* GPIO3V[0:16] pins */ + DM644X_GPIO3V, + + /* GPIO pins */ + DM644X_GPIO0, + DM644X_GPIO3, + DM644X_GPIO43_44, + DM644X_GPIO46_47, + + /* VPBE */ + DM644X_RGB666, + + /* LCD */ + DM644X_LOEEN, + DM644X_LFLDEN, +}; + +enum davinci_dm646x_index { + /* ATA function */ + DM646X_ATAEN, + + /* AUDIO Clock */ + DM646X_AUDCK1, + DM646X_AUDCK0, + + /* CRGEN Control */ + DM646X_CRGMUX, + + /* VPIF Control */ + DM646X_STSOMUX_DISABLE, + DM646X_STSIMUX_DISABLE, + DM646X_PTSOMUX_DISABLE, + DM646X_PTSIMUX_DISABLE, + + /* TSIF Control */ + DM646X_STSOMUX, + DM646X_STSIMUX, + DM646X_PTSOMUX_PARALLEL, + DM646X_PTSIMUX_PARALLEL, + DM646X_PTSOMUX_SERIAL, + DM646X_PTSIMUX_SERIAL, +}; + +enum davinci_dm355_index { + /* MMC/SD 0 */ + DM355_MMCSD0, + + /* MMC/SD 1 */ + DM355_SD1_CLK, + DM355_SD1_CMD, + DM355_SD1_DATA3, + DM355_SD1_DATA2, + DM355_SD1_DATA1, + DM355_SD1_DATA0, + + /* I2C */ + DM355_I2C_SDA, + DM355_I2C_SCL, + + /* ASP0 function */ + DM355_MCBSP0_BDX, + DM355_MCBSP0_X, + DM355_MCBSP0_BFSX, + DM355_MCBSP0_BDR, + DM355_MCBSP0_R, + DM355_MCBSP0_BFSR, + + /* SPI0 */ + DM355_SPI0_SDI, + DM355_SPI0_SDENA0, + DM355_SPI0_SDENA1, + + /* IRQ muxing */ + DM355_INT_EDMA_CC, + DM355_INT_EDMA_TC0_ERR, + DM355_INT_EDMA_TC1_ERR, + + /* EDMA event muxing */ + DM355_EVT8_ASP1_TX, + DM355_EVT9_ASP1_RX, + DM355_EVT26_MMC0_RX, +}; + +#ifdef CONFIG_DAVINCI_MUX +/* setup pin muxing */ +extern int davinci_cfg_reg(unsigned long reg_cfg); +#else +/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */ +static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; } +#endif + +#endif /* __INC_MACH_MUX_H */ diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 4977aa0..ab8a258 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -27,6 +27,8 @@ #ifndef __ASM_ARCH_PSC_H #define __ASM_ARCH_PSC_H +#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 + /* Power and Sleep Controller (PSC) Domains */ #define DAVINCI_GPSC_ARMDOMAIN 0 #define DAVINCI_GPSC_DSPDOMAIN 1 @@ -38,8 +40,6 @@ #define DAVINCI_LPSC_TPTC1 4 #define DAVINCI_LPSC_EMAC 5 #define DAVINCI_LPSC_EMAC_WRAPPER 6 -#define DAVINCI_LPSC_MDIO 7 -#define DAVINCI_LPSC_IEEE1394 8 #define DAVINCI_LPSC_USB 9 #define DAVINCI_LPSC_ATA 10 #define DAVINCI_LPSC_VLYNQ 11 @@ -47,7 +47,6 @@ #define DAVINCI_LPSC_DDR_EMIF 13 #define DAVINCI_LPSC_AEMIF 14 #define DAVINCI_LPSC_MMC_SD 15 -#define DAVINCI_LPSC_MEMSTICK 16 #define DAVINCI_LPSC_McBSP 17 #define DAVINCI_LPSC_I2C 18 #define DAVINCI_LPSC_UART0 19 @@ -73,4 +72,54 @@ #define DAVINCI_LPSC_GEM 39 #define DAVINCI_LPSC_IMCOP 40 +#define DM355_LPSC_TIMER3 5 +#define DM355_LPSC_SPI1 6 +#define DM355_LPSC_MMC_SD1 7 +#define DM355_LPSC_McBSP1 8 +#define DM355_LPSC_PWM3 10 +#define DM355_LPSC_SPI2 11 +#define DM355_LPSC_RTO 12 +#define DM355_LPSC_VPSS_DAC 41 + +/* + * LPSC Assignments + */ +#define DM646X_LPSC_ARM 0 +#define DM646X_LPSC_C64X_CPU 1 +#define DM646X_LPSC_HDVICP0 2 +#define DM646X_LPSC_HDVICP1 3 +#define DM646X_LPSC_TPCC 4 +#define DM646X_LPSC_TPTC0 5 +#define DM646X_LPSC_TPTC1 6 +#define DM646X_LPSC_TPTC2 7 +#define DM646X_LPSC_TPTC3 8 +#define DM646X_LPSC_PCI 13 +#define DM646X_LPSC_EMAC 14 +#define DM646X_LPSC_VDCE 15 +#define DM646X_LPSC_VPSSMSTR 16 +#define DM646X_LPSC_VPSSSLV 17 +#define DM646X_LPSC_TSIF0 18 +#define DM646X_LPSC_TSIF1 19 +#define DM646X_LPSC_DDR_EMIF 20 +#define DM646X_LPSC_AEMIF 21 +#define DM646X_LPSC_McASP0 22 +#define DM646X_LPSC_McASP1 23 +#define DM646X_LPSC_CRGEN0 24 +#define DM646X_LPSC_CRGEN1 25 +#define DM646X_LPSC_UART0 26 +#define DM646X_LPSC_UART1 27 +#define DM646X_LPSC_UART2 28 +#define DM646X_LPSC_PWM0 29 +#define DM646X_LPSC_PWM1 30 +#define DM646X_LPSC_I2C 31 +#define DM646X_LPSC_SPI 32 +#define DM646X_LPSC_GPIO 33 +#define DM646X_LPSC_TIMER0 34 +#define DM646X_LPSC_TIMER1 35 +#define DM646X_LPSC_ARM_INTC 45 + +extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id); +extern void davinci_psc_config(unsigned int domain, unsigned int ctlr, + unsigned int id, char enable); + #endif /* __ASM_ARCH_PSC_H */ diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index fb8cb22..794fa5c 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -13,8 +13,21 @@ #include <mach/io.h> -#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) -#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) -#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) +#define DAVINCI_MAX_NR_UARTS 3 +#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) +#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) +#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) + +/* DaVinci UART register offsets */ +#define UART_DAVINCI_PWREMU 0x0c +#define UART_DM646X_SCR 0x10 +#define UART_DM646X_SCR_TX_WATERMARK 0x08 + +struct davinci_uart_config { + /* Bit field of UARTs present; bit 0 --> UART1 */ + unsigned int enabled_uarts; +}; + +extern int davinci_serial_init(struct davinci_uart_config *); #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h new file mode 100644 index 0000000..111f7cc --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/sram.h @@ -0,0 +1,27 @@ +/* + * mach/sram.h - DaVinci simple SRAM allocator + * + * Copyright (C) 2009 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __MACH_SRAM_H +#define __MACH_SRAM_H + +/* ARBITRARY: SRAM allocations are multiples of this 2^N size */ +#define SRAM_GRANULARITY 512 + +/* + * SRAM allocations return a CPU virtual address, or NULL on error. + * If a DMA address is requested and the SRAM supports DMA, its + * mapped address is also returned. + * + * Errors include SRAM memory not being available, and requesting + * DMA mapped SRAM on systems which don't allow that. + */ +extern void *sram_alloc(size_t len, dma_addr_t *dma); +extern void sram_free(void *addr, size_t len); + +#endif /* __MACH_SRAM_H */ diff --git a/arch/arm/mach-davinci/include/mach/time.h b/arch/arm/mach-davinci/include/mach/time.h new file mode 100644 index 0000000..1c971d8 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/time.h @@ -0,0 +1,35 @@ +/* + * Local header file for DaVinci time code. + * + * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ARCH_ARM_MACH_DAVINCI_TIME_H +#define __ARCH_ARM_MACH_DAVINCI_TIME_H + +#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) +#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) +#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00) + +enum { + T0_BOT, + T0_TOP, + T1_BOT, + T1_TOP, + NUM_TIMERS +}; + +#define IS_TIMER1(id) (id & 0x2) +#define IS_TIMER0(id) (!IS_TIMER1(id)) +#define IS_TIMER_TOP(id) ((id & 0x1)) +#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id)) + +#define ID_TO_TIMER(id) (IS_TIMER1(id) != 0) + +extern struct davinci_timer_instance davinci_timer_instance[]; + +#endif /* __ARCH_ARM_MACH_DAVINCI_TIME_H */ diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 8c165de..1e27475 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -13,11 +13,24 @@ #include <linux/serial_reg.h> #include <mach/serial.h> +#include <asm/mach-types.h> + +extern unsigned int __machine_arch_type; + +static u32 *uart; + +static u32 *get_uart_base(void) +{ + /* Add logic here for new platforms, using __macine_arch_type */ + return (u32 *)DAVINCI_UART0_BASE; +} + /* PORT_16C550A, in polled non-fifo mode */ static void putc(char c) { - volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE; + if (!uart) + uart = get_uart_base(); while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); @@ -26,7 +39,9 @@ static void putc(char c) static inline void flush(void) { - volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE; + if (!uart) + uart = get_uart_base(); + while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); } diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c index 299515f..49912b4 100644 --- a/arch/arm/mach-davinci/io.c +++ b/arch/arm/mach-davinci/io.c @@ -9,49 +9,30 @@ */ #include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> #include <linux/io.h> #include <asm/tlb.h> -#include <asm/memory.h> -#include <asm/mach/map.h> -#include <mach/clock.h> - -extern void davinci_check_revision(void); +#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) +#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst))) /* - * The machine specific code may provide the extra mapping besides the - * default mapping provided here. + * Intercept ioremap() requests for addresses in our fixed mapping regions. */ -static struct map_desc davinci_io_desc[] __initdata = { - { - .virtual = IO_VIRT, - .pfn = __phys_to_pfn(IO_PHYS), - .length = IO_SIZE, - .type = MT_DEVICE - }, -}; - -void __init davinci_map_common_io(void) +void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type) { - iotable_init(davinci_io_desc, ARRAY_SIZE(davinci_io_desc)); + if (BETWEEN(p, IO_PHYS, IO_SIZE)) + return XLATE(p, IO_PHYS, IO_VIRT); - /* Normally devicemaps_init() would flush caches and tlb after - * mdesc->map_io(), but we must also do it here because of the CPU - * revision check below. - */ - local_flush_tlb_all(); - flush_cache_all(); - - /* We want to check CPU revision early for cpu_is_xxxx() macros. - * IO space mapping must be initialized before we can do that. - */ - davinci_check_revision(); + return __arm_ioremap(p, size, type); } +EXPORT_SYMBOL(davinci_ioremap); -void __init davinci_init_common_hw(void) +void davinci_iounmap(volatile void __iomem *addr) { - davinci_clk_init(); + unsigned long virt = (unsigned long)addr; + + if (virt >= VMALLOC_START && virt < VMALLOC_END) + __iounmap(addr); } +EXPORT_SYMBOL(davinci_iounmap); diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index 38021af..af92ffe 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -25,6 +25,8 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/cputype.h> +#include <mach/common.h> #include <asm/mach/irq.h> #define IRQ_BIT(irq) ((irq) & 0x1f) @@ -42,12 +44,12 @@ static inline unsigned int davinci_irq_readl(int offset) { - return davinci_readl(DAVINCI_ARM_INTC_BASE + offset); + return __raw_readl(davinci_intc_base + offset); } static inline void davinci_irq_writel(unsigned long value, int offset) { - davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset); + __raw_writel(value, davinci_intc_base + offset); } /* Disable interrupt */ @@ -108,80 +110,11 @@ static struct irq_chip davinci_irq_chip_0 = { .unmask = davinci_unmask_irq, }; - -/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ -static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { - [IRQ_VDINT0] = 2, - [IRQ_VDINT1] = 6, - [IRQ_VDINT2] = 6, - [IRQ_HISTINT] = 6, - [IRQ_H3AINT] = 6, - [IRQ_PRVUINT] = 6, - [IRQ_RSZINT] = 6, - [7] = 7, - [IRQ_VENCINT] = 6, - [IRQ_ASQINT] = 6, - [IRQ_IMXINT] = 6, - [IRQ_VLCDINT] = 6, - [IRQ_USBINT] = 4, - [IRQ_EMACINT] = 4, - [14] = 7, - [15] = 7, - [IRQ_CCINT0] = 5, /* dma */ - [IRQ_CCERRINT] = 5, /* dma */ - [IRQ_TCERRINT0] = 5, /* dma */ - [IRQ_TCERRINT] = 5, /* dma */ - [IRQ_PSCIN] = 7, - [21] = 7, - [IRQ_IDE] = 4, - [23] = 7, - [IRQ_MBXINT] = 7, - [IRQ_MBRINT] = 7, - [IRQ_MMCINT] = 7, - [IRQ_SDIOINT] = 7, - [28] = 7, - [IRQ_DDRINT] = 7, - [IRQ_AEMIFINT] = 7, - [IRQ_VLQINT] = 4, - [IRQ_TINT0_TINT12] = 2, /* clockevent */ - [IRQ_TINT0_TINT34] = 2, /* clocksource */ - [IRQ_TINT1_TINT12] = 7, /* DSP timer */ - [IRQ_TINT1_TINT34] = 7, /* system tick */ - [IRQ_PWMINT0] = 7, - [IRQ_PWMINT1] = 7, - [IRQ_PWMINT2] = 7, - [IRQ_I2C] = 3, - [IRQ_UARTINT0] = 3, - [IRQ_UARTINT1] = 3, - [IRQ_UARTINT2] = 3, - [IRQ_SPINT0] = 3, - [IRQ_SPINT1] = 3, - [45] = 7, - [IRQ_DSP2ARM0] = 4, - [IRQ_DSP2ARM1] = 4, - [IRQ_GPIO0] = 7, - [IRQ_GPIO1] = 7, - [IRQ_GPIO2] = 7, - [IRQ_GPIO3] = 7, - [IRQ_GPIO4] = 7, - [IRQ_GPIO5] = 7, - [IRQ_GPIO6] = 7, - [IRQ_GPIO7] = 7, - [IRQ_GPIOBNK0] = 7, - [IRQ_GPIOBNK1] = 7, - [IRQ_GPIOBNK2] = 7, - [IRQ_GPIOBNK3] = 7, - [IRQ_GPIOBNK4] = 7, - [IRQ_COMMTX] = 7, - [IRQ_COMMRX] = 7, - [IRQ_EMUINT] = 7, -}; - /* ARM Interrupt Controller Initialization */ void __init davinci_irq_init(void) { unsigned i; - const u8 *priority = default_priorities; + const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios; /* Clear all interrupt requests */ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); @@ -209,8 +142,8 @@ void __init davinci_irq_init(void) unsigned j; u32 pri; - for (j = 0, pri = 0; j < 32; j += 4, priority++) - pri |= (*priority & 0x07) << j; + for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++) + pri |= (*davinci_def_priorities & 0x07) << j; davinci_irq_writel(pri, i); } diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index 8ff9d8a..d310f57 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -1,41 +1,93 @@ /* - * DaVinci pin multiplexing configurations + * Utility to set the DAVINCI MUX register from a table in mux.h * * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> * + * Based on linux/arch/arm/plat-omap/mux.c: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ #include <linux/io.h> +#include <linux/module.h> #include <linux/spinlock.h> #include <mach/hardware.h> - #include <mach/mux.h> +#include <mach/common.h> -/* System control register offsets */ -#define PINMUX0 0x00 -#define PINMUX1 0x04 +/* + * Sets the DAVINCI MUX register based on the table + */ +int __init_or_module davinci_cfg_reg(const unsigned long index) +{ + static DEFINE_SPINLOCK(mux_spin_lock); + struct davinci_soc_info *soc_info = &davinci_soc_info; + void __iomem *base = soc_info->pinmux_base; + unsigned long flags; + const struct mux_config *cfg; + unsigned int reg_orig = 0, reg = 0; + unsigned int mask, warn = 0; -static DEFINE_SPINLOCK(mux_lock); + if (!soc_info->pinmux_pins) + BUG(); -void davinci_mux_peripheral(unsigned int mux, unsigned int enable) -{ - u32 pinmux, muxreg = PINMUX0; + if (index >= soc_info->pinmux_pins_num) { + printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", + index, soc_info->pinmux_pins_num); + dump_stack(); + return -ENODEV; + } + + cfg = &soc_info->pinmux_pins[index]; + + if (cfg->name == NULL) { + printk(KERN_ERR "No entry for the specified index\n"); + return -ENODEV; + } + + /* Update the mux register in question */ + if (cfg->mask) { + unsigned tmp1, tmp2; + + spin_lock_irqsave(&mux_spin_lock, flags); + reg_orig = __raw_readl(base + cfg->mux_reg); + + mask = (cfg->mask << cfg->mask_offset); + tmp1 = reg_orig & mask; + reg = reg_orig & ~mask; + + tmp2 = (cfg->mode << cfg->mask_offset); + reg |= tmp2; + + if (tmp1 != tmp2) + warn = 1; + + __raw_writel(reg, base + cfg->mux_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); + } + + if (warn) { +#ifdef CONFIG_DAVINCI_MUX_WARNINGS + printk(KERN_WARNING "MUX: initialized %s\n", cfg->name); +#endif + } - if (mux >= DAVINCI_MUX_LEVEL2) { - muxreg = PINMUX1; - mux -= DAVINCI_MUX_LEVEL2; +#ifdef CONFIG_DAVINCI_MUX_DEBUG + if (cfg->debug || warn) { + printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name); + printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n", + cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg); } +#endif - spin_lock(&mux_lock); - pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg); - if (enable) - pinmux |= (1 << mux); - else - pinmux &= ~(1 << mux); - davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg); - spin_unlock(&mux_lock); + return 0; } +EXPORT_SYMBOL(davinci_cfg_reg); diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h new file mode 100644 index 0000000..adc8694 --- /dev/null +++ b/arch/arm/mach-davinci/mux.h @@ -0,0 +1,51 @@ +/* + * Pin-multiplex helper macros for TI DaVinci family devices + * + * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright (C) 2008 Texas Instruments. + */ +#ifndef _MACH_DAVINCI_MUX_H_ +#define _MACH_DAVINCI_MUX_H_ + +#include <mach/mux.h> + +#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "PINMUX"#muxreg, \ + .mux_reg = PINMUX##muxreg, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "INTMUX", \ + .mux_reg = INTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "EVTMUX", \ + .mux_reg = EVTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#endif /* _MACH_DAVINCI_MUX_H */ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 58754f0..a78b657 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -23,6 +23,7 @@ #include <linux/init.h> #include <linux/io.h> +#include <mach/cputype.h> #include <mach/hardware.h> #include <mach/psc.h> #include <mach/mux.h> @@ -36,102 +37,81 @@ #define MDSTAT 0x800 #define MDCTL 0xA00 -/* System control register offsets */ -#define VDD3P3V_PWDN 0x48 +#define MDSTAT_STATE_MASK 0x1f -static void davinci_psc_mux(unsigned int id) +/* Return nonzero iff the domain's clock is active */ +int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) { - switch (id) { - case DAVINCI_LPSC_ATA: - davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1); - davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1); - break; - case DAVINCI_LPSC_MMC_SD: - /* VDD power manupulations are done in U-Boot for CPMAC - * so applies to MMC as well - */ - /*Set up the pull regiter for MMC */ - davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN); - davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0); - break; - case DAVINCI_LPSC_I2C: - davinci_mux_peripheral(DAVINCI_MUX_I2C, 1); - break; - case DAVINCI_LPSC_McBSP: - davinci_mux_peripheral(DAVINCI_MUX_ASP, 1); - break; - default: - break; + void __iomem *psc_base; + u32 mdstat; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { + pr_warning("PSC: Bad psc data: 0x%x[%d]\n", + (int)soc_info->psc_bases, ctlr); + return 0; } + + psc_base = soc_info->psc_bases[ctlr]; + mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + + /* if clocked, state can be "Enable" or "SyncReset" */ + return mdstat & BIT(12); } /* Enable or disable a PSC domain */ -void davinci_psc_config(unsigned int domain, unsigned int id, char enable) +void davinci_psc_config(unsigned int domain, unsigned int ctlr, + unsigned int id, char enable) { - u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask; + u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; + void __iomem *psc_base; + struct davinci_soc_info *soc_info = &davinci_soc_info; + u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */ + + if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { + pr_warning("PSC: Bad psc data: 0x%x[%d]\n", + (int)soc_info->psc_bases, ctlr); + return; + } - mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); - if (enable) - mdctl |= 0x00000003; /* Enable Module */ - else - mdctl &= 0xFFFFFFF2; /* Disable Module */ - davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); + psc_base = soc_info->psc_bases[ctlr]; - pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT); + mdctl = __raw_readl(psc_base + MDCTL + 4 * id); + mdctl &= ~MDSTAT_STATE_MASK; + mdctl |= next_state; + __raw_writel(mdctl, psc_base + MDCTL + 4 * id); + + pdstat = __raw_readl(psc_base + PDSTAT); if ((pdstat & 0x00000001) == 0) { - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x1; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - EPCPR); + epcpr = __raw_readl(psc_base + EPCPR); } while ((((epcpr >> domain) & 1) == 0)); - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x100; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } else { ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - PTSTAT); + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } - if (enable) - mdstat_mask = 0x3; - else - mdstat_mask = 0x2; - do { - mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - MDSTAT + 4 * id); - } while (!((mdstat & 0x0000001F) == mdstat_mask)); - - if (enable) - davinci_psc_mux(id); -} - -void __init davinci_psc_init(void) -{ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1); - - /* Turn on WatchDog timer LPSC. Needed for RESET to work */ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1); + mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + } while (!((mdstat & MDSTAT_STATE_MASK) == next_state)); } diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 3010f99..c530c73 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -32,65 +32,72 @@ #include <mach/hardware.h> #include <mach/serial.h> #include <mach/irqs.h> +#include <mach/cputype.h> +#include <mach/common.h> -#define UART_DAVINCI_PWREMU 0x0c +#include "clock.h" -static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up, - int offset) +static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, + int offset) { offset <<= up->regshift; - return (unsigned int)__raw_readb(up->membase + offset); + return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset); } -static inline void davinci_serial_outp(struct plat_serial8250_port *p, - int offset, int value) +static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, + int value) { offset <<= p->regshift; - __raw_writeb(value, p->membase + offset); + __raw_writel(value, IO_ADDRESS(p->mapbase) + offset); } -static struct plat_serial8250_port serial_platform_data[] = { - { - .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE), - .mapbase = (unsigned long)DAVINCI_UART0_BASE, - .irq = IRQ_UARTINT0, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 27000000, - }, - { - .flags = 0 - }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; - static void __init davinci_serial_reset(struct plat_serial8250_port *p) { - /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ unsigned int pwremu = 0; - davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */ + serial_write_reg(p, UART_IER, 0); /* disable all interrupts */ - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); mdelay(10); pwremu |= (0x3 << 13); pwremu |= 0x1; - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); + + if (cpu_is_davinci_dm646x()) + serial_write_reg(p, UART_DM646X_SCR, + UART_DM646X_SCR_TX_WATERMARK); } -static int __init davinci_init(void) +int __init davinci_serial_init(struct davinci_uart_config *info) { - davinci_serial_reset(&serial_platform_data[0]); - return platform_device_register(&serial_device); -} + int i; + char name[16]; + struct clk *uart_clk; + struct davinci_soc_info *soc_info = &davinci_soc_info; + struct device *dev = &soc_info->serial_dev->dev; + struct plat_serial8250_port *p = dev->platform_data; + + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on if not needed. + */ + for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) { + if (!(info->enabled_uarts & (1 << i))) + continue; -arch_initcall(davinci_init); + sprintf(name, "uart%d", i); + uart_clk = clk_get(dev, name); + if (IS_ERR(uart_clk)) + printk(KERN_ERR "%s:%d: failed to get UART%d clock\n", + __func__, __LINE__, i); + else { + clk_enable(uart_clk); + p->uartclk = clk_get_rate(uart_clk); + davinci_serial_reset(p); + } + } + + return platform_device_register(soc_info->serial_dev); +} diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c new file mode 100644 index 0000000..db54b2a --- /dev/null +++ b/arch/arm/mach-davinci/sram.c @@ -0,0 +1,74 @@ +/* + * mach-davinci/sram.c - DaVinci simple SRAM allocator + * + * Copyright (C) 2009 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/genalloc.h> + +#include <mach/common.h> +#include <mach/memory.h> +#include <mach/sram.h> + + +static struct gen_pool *sram_pool; + +void *sram_alloc(size_t len, dma_addr_t *dma) +{ + unsigned long vaddr; + dma_addr_t dma_base = davinci_soc_info.sram_dma; + + if (dma) + *dma = 0; + if (!sram_pool || (dma && !dma_base)) + return NULL; + + vaddr = gen_pool_alloc(sram_pool, len); + if (!vaddr) + return NULL; + + if (dma) + *dma = dma_base + (vaddr - SRAM_VIRT); + return (void *)vaddr; + +} +EXPORT_SYMBOL(sram_alloc); + +void sram_free(void *addr, size_t len) +{ + gen_pool_free(sram_pool, (unsigned long) addr, len); +} +EXPORT_SYMBOL(sram_free); + + +/* + * REVISIT This supports CPU and DMA access to/from SRAM, but it + * doesn't (yet?) support some other notable uses of SRAM: as TCM + * for data and/or instructions; and holding code needed to enter + * and exit suspend states (while DRAM can't be used). + */ +static int __init sram_init(void) +{ + unsigned len = davinci_soc_info.sram_len; + int status = 0; + + if (len) { + len = min(len, SRAM_SIZE); + sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1); + if (!sram_pool) + status = -ENOMEM; + } + if (sram_pool) + status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1); + WARN_ON(status < 0); + return status; +} +core_initcall(sram_init); + diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 6c227d4..0884ca5 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -16,6 +16,10 @@ #include <linux/clockchips.h> #include <linux/spinlock.h> #include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/device.h> +#include <linux/platform_device.h> #include <mach/hardware.h> #include <asm/system.h> @@ -24,50 +28,42 @@ #include <asm/mach/time.h> #include <asm/errno.h> #include <mach/io.h> +#include <mach/cputype.h> +#include <mach/time.h> +#include "clock.h" static struct clock_event_device clockevent_davinci; - -#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) -#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) -#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00) - -enum { - T0_BOT = 0, T0_TOP, T1_BOT, T1_TOP, NUM_TIMERS, -}; - -#define IS_TIMER1(id) (id & 0x2) -#define IS_TIMER0(id) (!IS_TIMER1(id)) -#define IS_TIMER_TOP(id) ((id & 0x1)) -#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id)) - -static int timer_irqs[NUM_TIMERS] = { - IRQ_TINT0_TINT12, - IRQ_TINT0_TINT34, - IRQ_TINT1_TINT12, - IRQ_TINT1_TINT34, -}; +static unsigned int davinci_clock_tick_rate; /* * This driver configures the 2 64-bit count-up timers as 4 independent * 32-bit count-up timers used as follows: - * - * T0_BOT: Timer 0, bottom: clockevent source for hrtimers - * T0_TOP: Timer 0, top : clocksource for generic timekeeping - * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) - * T1_TOP: Timer 1, top : <unused> */ -#define TID_CLOCKEVENT T0_BOT -#define TID_CLOCKSOURCE T0_TOP + +enum { + TID_CLOCKEVENT, + TID_CLOCKSOURCE, +}; /* Timer register offsets */ -#define PID12 0x0 -#define TIM12 0x10 -#define TIM34 0x14 -#define PRD12 0x18 -#define PRD34 0x1c -#define TCR 0x20 -#define TGCR 0x24 -#define WDTCR 0x28 +#define PID12 0x0 +#define TIM12 0x10 +#define TIM34 0x14 +#define PRD12 0x18 +#define PRD34 0x1c +#define TCR 0x20 +#define TGCR 0x24 +#define WDTCR 0x28 + +/* Offsets of the 8 compare registers */ +#define CMP12_0 0x60 +#define CMP12_1 0x64 +#define CMP12_2 0x68 +#define CMP12_3 0x6c +#define CMP12_4 0x70 +#define CMP12_5 0x74 +#define CMP12_6 0x78 +#define CMP12_7 0x7c /* Timer register bitfields */ #define TCR_ENAMODE_DISABLE 0x0 @@ -99,45 +95,74 @@ struct timer_s { unsigned int id; unsigned long period; unsigned long opts; - unsigned long reg_base; - unsigned long tim_reg; - unsigned long prd_reg; + unsigned long flags; + void __iomem *base; + unsigned long tim_off; + unsigned long prd_off; unsigned long enamode_shift; struct irqaction irqaction; }; static struct timer_s timers[]; /* values for 'opts' field of struct timer_s */ -#define TIMER_OPTS_DISABLED 0x00 -#define TIMER_OPTS_ONESHOT 0x01 -#define TIMER_OPTS_PERIODIC 0x02 +#define TIMER_OPTS_DISABLED 0x01 +#define TIMER_OPTS_ONESHOT 0x02 +#define TIMER_OPTS_PERIODIC 0x04 +#define TIMER_OPTS_STATE_MASK 0x07 + +#define TIMER_OPTS_USE_COMPARE 0x80000000 +#define USING_COMPARE(t) ((t)->opts & TIMER_OPTS_USE_COMPARE) + +static char *id_to_name[] = { + [T0_BOT] = "timer0_0", + [T0_TOP] = "timer0_1", + [T1_BOT] = "timer1_0", + [T1_TOP] = "timer1_1", +}; static int timer32_config(struct timer_s *t) { - u32 tcr = davinci_readl(t->reg_base + TCR); - - /* disable timer */ - tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift); - davinci_writel(tcr, t->reg_base + TCR); - - /* reset counter to zero, set new period */ - davinci_writel(0, t->tim_reg); - davinci_writel(t->period, t->prd_reg); - - /* Set enable mode */ - if (t->opts & TIMER_OPTS_ONESHOT) { - tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift; - } else if (t->opts & TIMER_OPTS_PERIODIC) { - tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift; + u32 tcr; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + if (USING_COMPARE(t)) { + struct davinci_timer_instance *dtip = + soc_info->timer_info->timers; + int event_timer = ID_TO_TIMER(timers[TID_CLOCKEVENT].id); + + /* + * Next interrupt should be the current time reg value plus + * the new period (using 32-bit unsigned addition/wrapping + * to 0 on overflow). This assumes that the clocksource + * is setup to count to 2^32-1 before wrapping around to 0. + */ + __raw_writel(__raw_readl(t->base + t->tim_off) + t->period, + t->base + dtip[event_timer].cmp_off); + } else { + tcr = __raw_readl(t->base + TCR); + + /* disable timer */ + tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift); + __raw_writel(tcr, t->base + TCR); + + /* reset counter to zero, set new period */ + __raw_writel(0, t->base + t->tim_off); + __raw_writel(t->period, t->base + t->prd_off); + + /* Set enable mode */ + if (t->opts & TIMER_OPTS_ONESHOT) + tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift; + else if (t->opts & TIMER_OPTS_PERIODIC) + tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift; + + __raw_writel(tcr, t->base + TCR); } - - davinci_writel(tcr, t->reg_base + TCR); return 0; } static inline u32 timer32_read(struct timer_s *t) { - return davinci_readl(t->tim_reg); + return __raw_readl(t->base + t->tim_off); } static irqreturn_t timer_interrupt(int irq, void *dev_id) @@ -176,62 +201,66 @@ static struct timer_s timers[] = { static void __init timer_init(void) { - u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; + struct davinci_soc_info *soc_info = &davinci_soc_info; + struct davinci_timer_instance *dtip = soc_info->timer_info->timers; int i; /* Global init of each 64-bit timer as a whole */ for(i=0; i<2; i++) { - u32 tgcr, base = bases[i]; + u32 tgcr; + void __iomem *base = dtip[i].base; /* Disabled, Internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset both timers, no pre-scaler for timer34 */ tgcr = 0; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Set both timers to unchained 32-bit */ tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Unreset timers */ tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Init both counters to zero */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); } /* Init of each timer as a 32-bit timer */ for (i=0; i< ARRAY_SIZE(timers); i++) { struct timer_s *t = &timers[i]; + int timer = ID_TO_TIMER(t->id); + u32 irq; + + t->base = dtip[timer].base; + + if (IS_TIMER_BOT(t->id)) { + t->enamode_shift = 6; + t->tim_off = TIM12; + t->prd_off = PRD12; + irq = dtip[timer].bottom_irq; + } else { + t->enamode_shift = 22; + t->tim_off = TIM34; + t->prd_off = PRD34; + irq = dtip[timer].top_irq; + } - if (t->name) { - t->id = i; - t->reg_base = (IS_TIMER1(t->id) ? - DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE); - - if (IS_TIMER_BOT(t->id)) { - t->enamode_shift = 6; - t->tim_reg = t->reg_base + TIM12; - t->prd_reg = t->reg_base + PRD12; - } else { - t->enamode_shift = 22; - t->tim_reg = t->reg_base + TIM34; - t->prd_reg = t->reg_base + PRD34; - } - - /* Register interrupt */ - t->irqaction.name = t->name; - t->irqaction.dev_id = (void *)t; - if (t->irqaction.handler != NULL) { - setup_irq(timer_irqs[t->id], &t->irqaction); - } - - timer32_config(&timers[i]); + /* Register interrupt */ + t->irqaction.name = t->name; + t->irqaction.dev_id = (void *)t; + + if (t->irqaction.handler != NULL) { + irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq; + setup_irq(irq, &t->irqaction); } + + timer32_config(&timers[i]); } } @@ -246,7 +275,6 @@ static cycle_t read_cycles(struct clocksource *cs) } static struct clocksource clocksource_davinci = { - .name = "timer0_1", .rating = 300, .read = read_cycles, .mask = CLOCKSOURCE_MASK(32), @@ -274,16 +302,19 @@ static void davinci_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - t->period = CLOCK_TICK_RATE / (HZ); - t->opts = TIMER_OPTS_PERIODIC; + t->period = davinci_clock_tick_rate / (HZ); + t->opts &= ~TIMER_OPTS_STATE_MASK; + t->opts |= TIMER_OPTS_PERIODIC; timer32_config(t); break; case CLOCK_EVT_MODE_ONESHOT: - t->opts = TIMER_OPTS_ONESHOT; + t->opts &= ~TIMER_OPTS_STATE_MASK; + t->opts |= TIMER_OPTS_ONESHOT; break; case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: - t->opts = TIMER_OPTS_DISABLED; + t->opts &= ~TIMER_OPTS_STATE_MASK; + t->opts |= TIMER_OPTS_DISABLED; break; case CLOCK_EVT_MODE_RESUME: break; @@ -291,7 +322,6 @@ static void davinci_set_mode(enum clock_event_mode mode, } static struct clock_event_device clockevent_davinci = { - .name = "timer0_0", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .shift = 32, .set_next_event = davinci_set_next_event, @@ -301,26 +331,67 @@ static struct clock_event_device clockevent_davinci = { static void __init davinci_timer_init(void) { + struct clk *timer_clk; + struct davinci_soc_info *soc_info = &davinci_soc_info; + unsigned int clockevent_id; + unsigned int clocksource_id; static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; + clockevent_id = soc_info->timer_info->clockevent_id; + clocksource_id = soc_info->timer_info->clocksource_id; + + timers[TID_CLOCKEVENT].id = clockevent_id; + timers[TID_CLOCKSOURCE].id = clocksource_id; + + /* + * If using same timer for both clock events & clocksource, + * a compare register must be used to generate an event interrupt. + * This is equivalent to a oneshot timer only (not periodic). + */ + if (clockevent_id == clocksource_id) { + struct davinci_timer_instance *dtip = + soc_info->timer_info->timers; + int event_timer = ID_TO_TIMER(clockevent_id); + + /* Only bottom timers can use compare regs */ + if (IS_TIMER_TOP(clockevent_id)) + pr_warning("davinci_timer_init: Invalid use" + " of system timers. Results unpredictable.\n"); + else if ((dtip[event_timer].cmp_off == 0) + || (dtip[event_timer].cmp_irq == 0)) + pr_warning("davinci_timer_init: Invalid timer instance" + " setup. Results unpredictable.\n"); + else { + timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE; + clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT; + } + } + /* init timer hw */ timer_init(); + timer_clk = clk_get(NULL, "timer0"); + BUG_ON(IS_ERR(timer_clk)); + clk_enable(timer_clk); + + davinci_clock_tick_rate = clk_get_rate(timer_clk); + /* setup clocksource */ + clocksource_davinci.name = id_to_name[clocksource_id]; clocksource_davinci.mult = - clocksource_khz2mult(CLOCK_TICK_RATE/1000, + clocksource_khz2mult(davinci_clock_tick_rate/1000, clocksource_davinci.shift); if (clocksource_register(&clocksource_davinci)) printk(err, clocksource_davinci.name); /* setup clockevent */ - clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, + clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id]; + clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC, clockevent_davinci.shift); clockevent_davinci.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_davinci); - clockevent_davinci.min_delta_ns = - clockevent_delta2ns(1, &clockevent_davinci); + clockevent_davinci.min_delta_ns = 50000; /* 50 usec */ clockevent_davinci.cpumask = cpumask_of(0); clockevents_register_device(&clockevent_davinci); @@ -332,43 +403,52 @@ struct sys_timer davinci_timer = { /* reset board using watchdog timer */ -void davinci_watchdog_reset(void) { - u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE; +void davinci_watchdog_reset(void) +{ + u32 tgcr, wdtcr; + struct davinci_soc_info *soc_info = &davinci_soc_info; + void __iomem *base = soc_info->wdt_base; + struct clk *wd_clk; + + wd_clk = clk_get(&davinci_wdt_device.dev, NULL); + if (WARN_ON(IS_ERR(wd_clk))) + return; + clk_enable(wd_clk); /* disable, internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset timer, set mode to 64-bit watchdog, and unreset */ tgcr = 0; - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT; tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); /* clear counter and period regs */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); - davinci_writel(0, base + PRD12); - davinci_writel(0, base + PRD34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); + __raw_writel(0, base + PRD12); + __raw_writel(0, base + PRD34); /* enable */ - wdtcr = davinci_readl(base + WDTCR); + wdtcr = __raw_readl(base + WDTCR); wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in pre-active state */ wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in active state */ wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* write an invalid value to the WDKEY field to trigger * a watchdog reset */ wdtcr = 0x00004000; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); } diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 2429b79..abedb63 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -14,6 +14,8 @@ #include <mach/hardware.h> #include <mach/irqs.h> +#define DAVINCI_USB_OTG_BASE 0x01C64000 + #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct musb_hdrc_eps_bits musb_eps[] = { { "ep1_tx", 8, }, diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 56bddce..d7291c6 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -9,87 +9,135 @@ config CRUNCH comment "EP93xx Platforms" +choice + prompt "EP93xx first SDRAM bank selection" + default EP93XX_SDCE3_SYNC_PHYS_OFFSET + +config EP93XX_SDCE3_SYNC_PHYS_OFFSET + bool "0x00000000 - SDCE3/SyncBoot" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0x00000000 + +config EP93XX_SDCE0_PHYS_OFFSET + bool "0xc0000000 - SDCEO" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0xc0000000 + +endchoice + config MACH_ADSSPHERE bool "Support ADS Sphere" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the ADS Sphere board. +config MACH_EDB93XX + bool + +config MACH_EDB9301 + bool "Support Cirrus Logic EDB9301" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX + help + Say 'Y' here if you want your kernel to support the Cirrus + Logic EDB9301 Evaluation Board. + config MACH_EDB9302 bool "Support Cirrus Logic EDB9302" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9302 Evaluation Board. config MACH_EDB9302A bool "Support Cirrus Logic EDB9302A" + depends on EP93XX_SDCE0_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9302A Evaluation Board. config MACH_EDB9307 bool "Support Cirrus Logic EDB9307" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9307 Evaluation Board. config MACH_EDB9307A bool "Support Cirrus Logic EDB9307A" + depends on EP93XX_SDCE0_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9307A Evaluation Board. config MACH_EDB9312 bool "Support Cirrus Logic EDB9312" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9312 Evaluation Board. config MACH_EDB9315 bool "Support Cirrus Logic EDB9315" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9315 Evaluation Board. config MACH_EDB9315A bool "Support Cirrus Logic EDB9315A" + depends on EP93XX_SDCE0_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9315A Evaluation Board. config MACH_GESBC9312 + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET bool "Support Glomation GESBC-9312-sx" help Say 'Y' here if you want your kernel to support the Glomation GESBC-9312-sx board. config MACH_MICRO9 - bool - default n + bool config MACH_MICRO9H - bool "Support Contec Hypercontrol Micro9-H" - select MACH_MICRO9 - help - Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-H board. + bool "Support Contec Hypercontrol Micro9-H" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Hypercontrol Micro9-H board. config MACH_MICRO9M - bool "Support Contec Hypercontrol Micro9-M" - select MACH_MICRO9 - help - Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-M board. + bool "Support Contec Hypercontrol Micro9-M" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Hypercontrol Micro9-M board. config MACH_MICRO9L - bool "Support Contec Hypercontrol Micro9-L" - select MACH_MICRO9 - help - Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-L board. + bool "Support Contec Hypercontrol Micro9-L" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Hypercontrol Micro9-L board. config MACH_TS72XX bool "Support Technologic Systems TS-72xx SBC" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the Technologic Systems TS-72xx board. diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 9522e20..eae6199 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -7,13 +7,7 @@ obj-n := obj- := obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o -obj-$(CONFIG_MACH_EDB9302) += edb9302.o -obj-$(CONFIG_MACH_EDB9302A) += edb9302a.o -obj-$(CONFIG_MACH_EDB9307) += edb9307.o -obj-$(CONFIG_MACH_EDB9307A) += edb9307a.o -obj-$(CONFIG_MACH_EDB9312) += edb9312.o -obj-$(CONFIG_MACH_EDB9315) += edb9315.o -obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o +obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o obj-$(CONFIG_MACH_MICRO9) += micro9.o obj-$(CONFIG_MACH_TS72XX) += ts72xx.o diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot index d5561ad..27a085a 100644 --- a/arch/arm/mach-ep93xx/Makefile.boot +++ b/arch/arm/mach-ep93xx/Makefile.boot @@ -1,2 +1,5 @@ - zreladdr-y := 0x00008000 -params_phys-y := 0x00000100 + zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00008000 +params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100 + + zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000 +params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100 diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index e8ebeae..755e981 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -21,15 +21,50 @@ #include <asm/div64.h> #include <mach/hardware.h> + +/* + * The EP93xx has two external crystal oscillators. To generate the + * required high-frequency clocks, the processor uses two phase-locked- + * loops (PLLs) to multiply the incoming external clock signal to much + * higher frequencies that are then divided down by programmable dividers + * to produce the needed clocks. The PLLs operate independently of one + * another. + */ +#define EP93XX_EXT_CLK_RATE 14745600 +#define EP93XX_EXT_RTC_RATE 32768 + + struct clk { unsigned long rate; int users; + int sw_locked; u32 enable_reg; u32 enable_mask; + + unsigned long (*get_rate)(struct clk *clk); }; -static struct clk clk_uart = { - .rate = 14745600, + +static unsigned long get_uart_rate(struct clk *clk); + + +static struct clk clk_uart1 = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, + .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN, + .get_rate = get_uart_rate, +}; +static struct clk clk_uart2 = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, + .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN, + .get_rate = get_uart_rate, +}; +static struct clk clk_uart3 = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, + .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN, + .get_rate = get_uart_rate, }; static struct clk clk_pll1; static struct clk clk_f; @@ -37,73 +72,73 @@ static struct clk clk_h; static struct clk clk_p; static struct clk clk_pll2; static struct clk clk_usb_host = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = EP93XX_SYSCON_CLOCK_USH_EN, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN, }; /* DMA Clocks */ static struct clk clk_m2p0 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00020000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P0, }; static struct clk clk_m2p1 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00010000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P1, }; static struct clk clk_m2p2 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00080000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P2, }; static struct clk clk_m2p3 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00040000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P3, }; static struct clk clk_m2p4 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00200000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P4, }; static struct clk clk_m2p5 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00100000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P5, }; static struct clk clk_m2p6 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00800000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P6, }; static struct clk clk_m2p7 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00400000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P7, }; static struct clk clk_m2p8 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x02000000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P8, }; static struct clk clk_m2p9 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x01000000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P9, }; static struct clk clk_m2m0 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x04000000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M0, }; static struct clk clk_m2m1 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x08000000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M1, }; #define INIT_CK(dev,con,ck) \ { .dev_id = dev, .con_id = con, .clk = ck } static struct clk_lookup clocks[] = { - INIT_CK("apb:uart1", NULL, &clk_uart), - INIT_CK("apb:uart2", NULL, &clk_uart), - INIT_CK("apb:uart3", NULL, &clk_uart), + INIT_CK("apb:uart1", NULL, &clk_uart1), + INIT_CK("apb:uart2", NULL, &clk_uart2), + INIT_CK("apb:uart3", NULL, &clk_uart3), INIT_CK(NULL, "pll1", &clk_pll1), INIT_CK(NULL, "fclk", &clk_f), INIT_CK(NULL, "hclk", &clk_h), INIT_CK(NULL, "pclk", &clk_p), INIT_CK(NULL, "pll2", &clk_pll2), - INIT_CK(NULL, "usb_host", &clk_usb_host), + INIT_CK("ep93xx-ohci", NULL, &clk_usb_host), INIT_CK(NULL, "m2p0", &clk_m2p0), INIT_CK(NULL, "m2p1", &clk_m2p1), INIT_CK(NULL, "m2p2", &clk_m2p2), @@ -125,6 +160,8 @@ int clk_enable(struct clk *clk) u32 value; value = __raw_readl(clk->enable_reg); + if (clk->sw_locked) + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(value | clk->enable_mask, clk->enable_reg); } @@ -138,13 +175,29 @@ void clk_disable(struct clk *clk) u32 value; value = __raw_readl(clk->enable_reg); + if (clk->sw_locked) + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(value & ~clk->enable_mask, clk->enable_reg); } } EXPORT_SYMBOL(clk_disable); +static unsigned long get_uart_rate(struct clk *clk) +{ + u32 value; + + value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL); + if (value & EP93XX_SYSCON_CLOCK_UARTBAUD) + return EP93XX_EXT_CLK_RATE; + else + return EP93XX_EXT_CLK_RATE / 2; +} + unsigned long clk_get_rate(struct clk *clk) { + if (clk->get_rate) + return clk->get_rate(clk); + return clk->rate; } EXPORT_SYMBOL(clk_get_rate); @@ -162,7 +215,7 @@ static unsigned long calc_pll_rate(u32 config_word) unsigned long long rate; int i; - rate = 14745600; + rate = EP93XX_EXT_CLK_RATE; rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */ rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */ do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */ @@ -195,7 +248,7 @@ static int __init ep93xx_clock_init(void) value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1); if (!(value & 0x00800000)) { /* PLL1 bypassed? */ - clk_pll1.rate = 14745600; + clk_pll1.rate = EP93XX_EXT_CLK_RATE; } else { clk_pll1.rate = calc_pll_rate(value); } @@ -206,7 +259,7 @@ static int __init ep93xx_clock_init(void) value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2); if (!(value & 0x00080000)) { /* PLL2 bypassed? */ - clk_pll2.rate = 14745600; + clk_pll2.rate = EP93XX_EXT_CLK_RATE; } else if (value & 0x00040000) { /* PLL2 enabled? */ clk_pll2.rate = calc_pll_rate(value); } else { diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 6faa3dc..204dc5c 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -155,7 +155,7 @@ static unsigned char gpio_int_unmasked[3]; static unsigned char gpio_int_enabled[3]; static unsigned char gpio_int_type1[3]; static unsigned char gpio_int_type2[3]; -static unsigned char gpio_int_debouce[3]; +static unsigned char gpio_int_debounce[3]; /* Port ordering is: A B F */ static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; @@ -192,11 +192,11 @@ void ep93xx_gpio_int_debounce(unsigned int irq, int enable) int port_mask = 1 << (line & 7); if (enable) - gpio_int_debouce[port] |= port_mask; + gpio_int_debounce[port] |= port_mask; else - gpio_int_debouce[port] &= ~port_mask; + gpio_int_debounce[port] &= ~port_mask; - __raw_writeb(gpio_int_debouce[port], + __raw_writeb(gpio_int_debounce[port], EP93XX_GPIO_REG(int_debounce_register_offset[port])); } EXPORT_SYMBOL(ep93xx_gpio_int_debounce); @@ -450,10 +450,19 @@ static struct amba_device uart3_device = { }; +static struct resource ep93xx_rtc_resource[] = { + { + .start = EP93XX_RTC_PHYS_BASE, + .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1, + .flags = IORESOURCE_MEM, + }, +}; + static struct platform_device ep93xx_rtc_device = { - .name = "ep93xx-rtc", - .id = -1, - .num_resources = 0, + .name = "ep93xx-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_rtc_resource), + .resource = ep93xx_rtc_resource, }; diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c deleted file mode 100644 index 8bf8d7c..0000000 --- a/arch/arm/mach-ep93xx/edb9302.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9302.c - * Cirrus Logic EDB9302 support. - * - * Copyright (C) 2006 George Kashperko <george@chas.com.ua> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -static struct physmap_flash_data edb9302_flash_data = { - .width = 2, -}; - -static struct resource edb9302_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9302_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9302_flash_data, - }, - .num_resources = 1, - .resource = &edb9302_flash_resource, -}; - -static struct ep93xx_eth_data edb9302_eth_data = { - .phy_id = 1, -}; - -static void __init edb9302_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9302_flash); - - ep93xx_register_eth(&edb9302_eth_data, 1); -} - -MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") - /* Maintainer: George Kashperko <george@chas.com.ua> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9302_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c deleted file mode 100644 index a352c57..0000000 --- a/arch/arm/mach-ep93xx/edb9302a.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9302a.c - * Cirrus Logic EDB9302A support. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -static struct physmap_flash_data edb9302a_flash_data = { - .width = 2, -}; - -static struct resource edb9302a_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9302a_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9302a_flash_data, - }, - .num_resources = 1, - .resource = &edb9302a_flash_resource, -}; - -static struct ep93xx_eth_data edb9302a_eth_data = { - .phy_id = 1, -}; - -static void __init edb9302a_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9302a_flash); - - ep93xx_register_eth(&edb9302a_eth_data, 1); -} - -MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9302a_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c deleted file mode 100644 index 5ab22f6..0000000 --- a/arch/arm/mach-ep93xx/edb9307.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9307.c - * Cirrus Logic EDB9307 support. - * - * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -static struct physmap_flash_data edb9307_flash_data = { - .width = 4, -}; - -static struct resource edb9307_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9307_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9307_flash_data, - }, - .num_resources = 1, - .resource = &edb9307_flash_resource, -}; - -static struct ep93xx_eth_data edb9307_eth_data = { - .phy_id = 1, -}; - -static void __init edb9307_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9307_flash); - - ep93xx_register_eth(&edb9307_eth_data, 1); -} - -MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") - /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9307_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c deleted file mode 100644 index 6171167..0000000 --- a/arch/arm/mach-ep93xx/edb9307a.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9307a.c - * Cirrus Logic EDB9307A support. - * - * Copyright (C) 2008 H Hartley Sweeten <hsweeten@visionengravers.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -static struct physmap_flash_data edb9307a_flash_data = { - .width = 2, -}; - -static struct resource edb9307a_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9307a_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9307a_flash_data, - }, - .num_resources = 1, - .resource = &edb9307a_flash_resource, -}; - -static struct ep93xx_eth_data edb9307a_eth_data = { - .phy_id = 1, -}; - -static struct i2c_board_info __initdata edb9307a_i2c_data[] = { - { - /* On-board battery backed RTC */ - I2C_BOARD_INFO("isl1208", 0x6f), - }, - /* - * The I2C signals are also routed to the Expansion Connector (J4) - */ -}; - -static void __init edb9307a_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9307a_flash); - - ep93xx_register_eth(&edb9307a_eth_data, 1); - - ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data)); -} - -MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") - /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9307a_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c deleted file mode 100644 index d7179f6..0000000 --- a/arch/arm/mach-ep93xx/edb9312.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9312.c - * Cirrus Logic EDB9312 support. - * - * Copyright (C) 2006 Infosys Technologies Limited - * Toufeeq Hussain <toufeeq_hussain@infosys.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -static struct physmap_flash_data edb9312_flash_data = { - .width = 4, -}; - -static struct resource edb9312_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9312_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9312_flash_data, - }, - .num_resources = 1, - .resource = &edb9312_flash_resource, -}; - -static struct ep93xx_eth_data edb9312_eth_data = { - .phy_id = 1, -}; - -static void __init edb9312_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9312_flash); - - ep93xx_register_eth(&edb9312_eth_data, 1); -} - -MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") - /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9312_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c deleted file mode 100644 index 025af6e..0000000 --- a/arch/arm/mach-ep93xx/edb9315.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9315.c - * Cirrus Logic EDB9315 support. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -static struct physmap_flash_data edb9315_flash_data = { - .width = 4, -}; - -static struct resource edb9315_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9315_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9315_flash_data, - }, - .num_resources = 1, - .resource = &edb9315_flash_resource, -}; - -static struct ep93xx_eth_data edb9315_eth_data = { - .phy_id = 1, -}; - -static void __init edb9315_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9315_flash); - - ep93xx_register_eth(&edb9315_eth_data, 1); -} - -MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9315_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c deleted file mode 100644 index 4c9cc8a..0000000 --- a/arch/arm/mach-ep93xx/edb9315a.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9315a.c - * Cirrus Logic EDB9315A support. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -static struct physmap_flash_data edb9315a_flash_data = { - .width = 2, -}; - -static struct resource edb9315a_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9315a_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9315a_flash_data, - }, - .num_resources = 1, - .resource = &edb9315a_flash_resource, -}; - -static struct ep93xx_eth_data edb9315a_eth_data = { - .phy_id = 1, -}; - -static void __init edb9315a_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9315a_flash); - - ep93xx_register_eth(&edb9315a_eth_data, 1); -} - -MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9315a_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c new file mode 100644 index 0000000..e9e45b9 --- /dev/null +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -0,0 +1,217 @@ +/* + * arch/arm/mach-ep93xx/edb93xx.c + * Cirrus Logic EDB93xx Development Board support. + * + * EDB93XX, EDB9301, EDB9307A + * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com> + * + * EDB9302 + * Copyright (C) 2006 George Kashperko <george@chas.com.ua> + * + * EDB9302A, EDB9315, EDB9315A + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * EDB9307 + * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> + * + * EDB9312 + * Copyright (C) 2006 Infosys Technologies Limited + * Toufeeq Hussain <toufeeq_hussain@infosys.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static struct physmap_flash_data edb93xx_flash_data; + +static struct resource edb93xx_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device edb93xx_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &edb93xx_flash_data, + }, + .num_resources = 1, + .resource = &edb93xx_flash_resource, +}; + +static void __init __edb93xx_register_flash(unsigned int width, + resource_size_t start, resource_size_t size) +{ + edb93xx_flash_data.width = width; + edb93xx_flash_resource.start = start; + edb93xx_flash_resource.end = start + size - 1; + + platform_device_register(&edb93xx_flash); +} + +static void __init edb93xx_register_flash(void) +{ + if (machine_is_edb9307() || machine_is_edb9312() || + machine_is_edb9315()) { + __edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M); + } else { + __edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); + } +} + +static struct ep93xx_eth_data edb93xx_eth_data = { + .phy_id = 1, +}; + +static struct i2c_board_info __initdata edb93xxa_i2c_data[] = { + { + I2C_BOARD_INFO("isl1208", 0x6f), + }, +}; + +static struct i2c_board_info __initdata edb93xx_i2c_data[] = { + { + I2C_BOARD_INFO("ds1337", 0x68), + }, +}; + +static void __init edb93xx_register_i2c(void) +{ + if (machine_is_edb9302a() || machine_is_edb9307a() || + machine_is_edb9315a()) { + ep93xx_register_i2c(edb93xxa_i2c_data, + ARRAY_SIZE(edb93xxa_i2c_data)); + } else if (machine_is_edb9307() || machine_is_edb9312() || + machine_is_edb9315()) { + ep93xx_register_i2c(edb93xx_i2c_data, + ARRAY_SIZE(edb93xx_i2c_data)); + } +} + +static void __init edb93xx_init_machine(void) +{ + ep93xx_init_devices(); + edb93xx_register_flash(); + ep93xx_register_eth(&edb93xx_eth_data, 1); + edb93xx_register_i2c(); +} + + +#ifdef CONFIG_MACH_EDB9301 +MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") + /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9302 +MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") + /* Maintainer: George Kashperko <george@chas.com.ua> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9302A +MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9307 +MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") + /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9307A +MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") + /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9312 +MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") + /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9315 +MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9315A +MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index f66be12..967c079 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -147,19 +147,36 @@ #define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000) #define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000) +#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000) #define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000) #define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) #define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) -#define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04) -#define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000 -#define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000 +#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04) +#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31) +#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29) +#define EP93XX_SYSCON_PWRCNT_USH_EN (1<<28) +#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 (1<<27) +#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 (1<<26) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 (1<<25) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 (1<<24) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 (1<<23) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 (1<<22) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 (1<<21) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 (1<<20) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 (1<<19) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 (1<<18) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 (1<<17) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16) #define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) #define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) #define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20) #define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24) #define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80) -#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000 +#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN (1<<24) +#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE (1<<23) +#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN (1<<20) +#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN (1<<18) #define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) #define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000) diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h index 5c80c3c..925b12e 100644 --- a/arch/arm/mach-ep93xx/include/mach/memory.h +++ b/arch/arm/mach-ep93xx/include/mach/memory.h @@ -5,6 +5,12 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H +#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) #define PHYS_OFFSET UL(0x00000000) +#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) +#define PHYS_OFFSET UL(0xc0000000) +#else +#error "Kconfig bug: No EP93xx PHYS_OFFSET set" +#endif #endif diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h index de67526..213a4fc 100644 --- a/arch/arm/mach-gemini/include/mach/hardware.h +++ b/arch/arm/mach-gemini/include/mach/hardware.h @@ -15,10 +15,9 @@ /* * Memory Map definitions */ -/* FIXME: Does it really swap SRAM like this? */ #ifdef CONFIG_GEMINI_MEM_SWAP # define GEMINI_DRAM_BASE 0x00000000 -# define GEMINI_SRAM_BASE 0x20000000 +# define GEMINI_SRAM_BASE 0x70000000 #else # define GEMINI_SRAM_BASE 0x00000000 # define GEMINI_DRAM_BASE 0x10000000 diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig deleted file mode 100644 index cddd194..0000000 --- a/arch/arm/mach-imx/Kconfig +++ /dev/null @@ -1,11 +0,0 @@ -menu "IMX Implementations" - depends on ARCH_IMX - -config ARCH_MX1ADS - bool "mx1ads" - depends on ARCH_IMX - select ISA - help - Say Y here if you are using the Motorola MX1ADS board - -endmenu diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile deleted file mode 100644 index b047c7e..0000000 --- a/arch/arm/mach-imx/Makefile +++ /dev/null @@ -1,18 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y += irq.o time.o dma.o generic.o clock.o - -obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o - -# Specific board support -obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o - -# Support for blinky lights -led-y := leds.o - -obj-$(CONFIG_LEDS) += $(led-y) -led-$(CONFIG_ARCH_MX1ADS) += leds-mx1ads.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot deleted file mode 100644 index fd72ce5..0000000 --- a/arch/arm/mach-imx/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-$(CONFIG_ARCH_MX1ADS) := 0x08008000 - diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c deleted file mode 100644 index cf332ae..0000000 --- a/arch/arm/mach-imx/clock.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/math64.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <mach/hardware.h> - -/* - * Very simple approach: We can't disable clocks, so we do - * not need refcounting - */ - -struct clk { - struct list_head node; - const char *name; - unsigned long (*get_rate)(void); -}; - -/* - * get the system pll clock in Hz - * - * mfi + mfn / (mfd +1) - * f = 2 * f_ref * -------------------- - * pd + 1 - */ -static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref) -{ - unsigned long long ll; - unsigned long quot; - - u32 mfi = (pll >> 10) & 0xf; - u32 mfn = pll & 0x3ff; - u32 mfd = (pll >> 16) & 0x3ff; - u32 pd = (pll >> 26) & 0xf; - - mfi = mfi <= 5 ? 5 : mfi; - - ll = 2 * (unsigned long long)f_ref * - ((mfi << 16) + (mfn << 16) / (mfd + 1)); - quot = (pd + 1) * (1 << 16); - ll += quot / 2; - do_div(ll, quot); - return (unsigned long)ll; -} - -static unsigned long imx_get_system_clk(void) -{ - u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512); - - return imx_decode_pll(SPCTL0, f_ref); -} - -static unsigned long imx_get_mcu_clk(void) -{ - return imx_decode_pll(MPCTL0, CLK32 * 512); -} - -/* - * get peripheral clock 1 ( UART[12], Timer[12], PWM ) - */ -static unsigned long imx_get_perclk1(void) -{ - return imx_get_system_clk() / (((PCDR) & 0xf)+1); -} - -/* - * get peripheral clock 2 ( LCD, SD, SPI[12] ) - */ -static unsigned long imx_get_perclk2(void) -{ - return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1); -} - -/* - * get peripheral clock 3 ( SSI ) - */ -static unsigned long imx_get_perclk3(void) -{ - return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1); -} - -/* - * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA ) - */ -static unsigned long imx_get_hclk(void) -{ - return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1); -} - -static struct clk clk_system_clk = { - .name = "system_clk", - .get_rate = imx_get_system_clk, -}; - -static struct clk clk_hclk = { - .name = "hclk", - .get_rate = imx_get_hclk, -}; - -static struct clk clk_mcu_clk = { - .name = "mcu_clk", - .get_rate = imx_get_mcu_clk, -}; - -static struct clk clk_perclk1 = { - .name = "perclk1", - .get_rate = imx_get_perclk1, -}; - -static struct clk clk_uart_clk = { - .name = "uart_clk", - .get_rate = imx_get_perclk1, -}; - -static struct clk clk_perclk2 = { - .name = "perclk2", - .get_rate = imx_get_perclk2, -}; - -static struct clk clk_perclk3 = { - .name = "perclk3", - .get_rate = imx_get_perclk3, -}; - -static struct clk *clks[] = { - &clk_perclk1, - &clk_perclk2, - &clk_perclk3, - &clk_system_clk, - &clk_hclk, - &clk_mcu_clk, - &clk_uart_clk, -}; - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); - -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *p, *clk = ERR_PTR(-ENOENT); - - mutex_lock(&clocks_mutex); - list_for_each_entry(p, &clocks, node) { - if (!strcmp(p->name, id)) { - clk = p; - goto found; - } - } - -found: - mutex_unlock(&clocks_mutex); - - return clk; -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->get_rate(); -} -EXPORT_SYMBOL(clk_get_rate); - -int imx_clocks_init(void) -{ - int i; - - mutex_lock(&clocks_mutex); - for (i = 0; i < ARRAY_SIZE(clks); i++) - list_add(&clks[i]->node, &clocks); - mutex_unlock(&clocks_mutex); - - return 0; -} - diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c deleted file mode 100644 index 434b4ca..0000000 --- a/arch/arm/mach-imx/cpufreq.c +++ /dev/null @@ -1,315 +0,0 @@ -/* - * cpu.c: clock scaling for the iMX - * - * Copyright (C) 2000 2001, The Delft University of Technology - * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de> - * Copyright (C) 2006 Inky Lung <ilung@cwlinux.com> - * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com> - * - * Based on SA1100 version written by: - * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version - * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl): - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -/*#define DEBUG*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <asm/system.h> - -#include <mach/hardware.h> - -#include "generic.h" - -#ifndef __val2mfld -#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask)) -#endif -#ifndef __mfld2val -#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1))) -#endif - -#define CR_920T_CLOCK_MODE 0xC0000000 -#define CR_920T_FASTBUS_MODE 0x00000000 -#define CR_920T_ASYNC_MODE 0xC0000000 - -static u32 mpctl0_at_boot; -static u32 bclk_div_at_boot; - -static struct clk *system_clk, *mcu_clk; - -static void imx_set_async_mode(void) -{ - adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE); -} - -static void imx_set_fastbus_mode(void) -{ - adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE); -} - -static void imx_set_mpctl0(u32 mpctl0) -{ - unsigned long flags; - - if (mpctl0 == 0) { - local_irq_save(flags); - CSCR &= ~CSCR_MPEN; - local_irq_restore(flags); - return; - } - - local_irq_save(flags); - MPCTL0 = mpctl0; - CSCR |= CSCR_MPEN; - local_irq_restore(flags); -} - -/** - * imx_compute_mpctl - compute new PLL parameters - * @new_mpctl: pointer to location assigned by new PLL control register value - * @cur_mpctl: current PLL control register parameters - * @f_ref: reference source frequency Hz - * @freq: required frequency in Hz - * @relation: is one of %CPUFREQ_RELATION_L (supremum) - * and %CPUFREQ_RELATION_H (infimum) - */ -long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, u32 f_ref, unsigned long freq, int relation) -{ - u32 mfi; - u32 mfn; - u32 mfd; - u32 pd; - unsigned long long ll; - long l; - long quot; - - /* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */ - /* PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */ - - if (cur_mpctl) { - mfd = ((cur_mpctl >> 16) & 0x3ff) + 1; - pd = ((cur_mpctl >> 26) & 0xf) + 1; - } else { - pd=2; mfd=313; - } - - /* pd=2; mfd=313; mfi=8; mfn=183; */ - /* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */ - - quot = (f_ref + (1 << 9)) >> 10; - l = (freq * pd + quot) / (2 * quot); - mfi = l >> 10; - mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10; - - mfd -= 1; - pd -= 1; - - *new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16) - | ((pd & 0xf) << 26); - - ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) ); - quot = (pd+1) * (1<<16); - ll += quot / 2; - do_div(ll, quot); - freq = ll; - - pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n", - pd, mfd, mfi, mfn, freq); - - return freq; -} - - -static int imx_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - - return 0; -} - -static unsigned int imx_get_speed(unsigned int cpu) -{ - unsigned int freq; - unsigned int cr; - unsigned int cscr; - unsigned int bclk_div; - - if (cpu) - return 0; - - cscr = CSCR; - bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1; - cr = get_cr(); - - if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) { - freq = clk_get_rate(system_clk); - freq = (freq + bclk_div/2) / bclk_div; - } else { - freq = clk_get_rate(mcu_clk); - if (cscr & CSCR_MPU_PRESC) - freq /= 2; - } - - freq = (freq + 500) / 1000; - - return freq; -} - -static int imx_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_freqs freqs; - u32 mpctl0 = 0; - u32 cscr; - unsigned long flags; - long freq; - long sysclk; - unsigned int bclk_div = bclk_div_at_boot; - - /* - * Some governors do not respects CPU and policy lower limits - * which leads to bad things (division by zero etc), ensure - * that such things do not happen. - */ - if(target_freq < policy->cpuinfo.min_freq) - target_freq = policy->cpuinfo.min_freq; - - if(target_freq < policy->min) - target_freq = policy->min; - - freq = target_freq * 1000; - - pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n", - freq, mpctl0_at_boot); - - sysclk = clk_get_rate(system_clk); - - if (freq > sysclk / bclk_div_at_boot + 1000000) { - freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation); - if (freq < 0) { - printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq); - return -EINVAL; - } - } else { - if(freq + 1000 < sysclk) { - if (relation == CPUFREQ_RELATION_L) - bclk_div = (sysclk - 1000) / freq; - else - bclk_div = (sysclk + freq + 1000) / freq; - - if(bclk_div > 16) - bclk_div = 16; - if(bclk_div < bclk_div_at_boot) - bclk_div = bclk_div_at_boot; - } - freq = (sysclk + bclk_div / 2) / bclk_div; - } - - freqs.old = imx_get_speed(0); - freqs.new = (freq + 500) / 1000; - freqs.cpu = 0; - freqs.flags = 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - local_irq_save(flags); - - imx_set_fastbus_mode(); - - imx_set_mpctl0(mpctl0); - - cscr = CSCR; - cscr &= ~CSCR_BCLK_DIV; - cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1); - CSCR = cscr; - - if(mpctl0) { - CSCR |= CSCR_MPLL_RESTART; - - /* Wait until MPLL is stabilized */ - while( CSCR & CSCR_MPLL_RESTART ); - - imx_set_async_mode(); - } - - local_irq_restore(flags); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n", - freq, mpctl0? "MPLL": "SPLL"); - - return 0; -} - -static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy) -{ - printk(KERN_INFO "i.MX cpu freq change driver v1.0\n"); - - if (policy->cpu != 0) - return -EINVAL; - - policy->cur = policy->min = policy->max = imx_get_speed(0); - policy->cpuinfo.min_freq = 8000; - policy->cpuinfo.max_freq = 200000; - /* Manual states, that PLL stabilizes in two CLK32 periods */ - policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32; - return 0; -} - -static struct cpufreq_driver imx_driver = { - .flags = CPUFREQ_STICKY, - .verify = imx_verify_speed, - .target = imx_set_target, - .get = imx_get_speed, - .init = imx_cpufreq_driver_init, - .name = "imx", -}; - -static int __init imx_cpufreq_init(void) -{ - bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1; - mpctl0_at_boot = 0; - - system_clk = clk_get(NULL, "system_clk"); - if (IS_ERR(system_clk)) - return PTR_ERR(system_clk); - - mcu_clk = clk_get(NULL, "mcu_clk"); - if (IS_ERR(mcu_clk)) { - clk_put(system_clk); - return PTR_ERR(mcu_clk); - } - - if((CSCR & CSCR_MPEN) && - ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE)) - mpctl0_at_boot = MPCTL0; - - return cpufreq_register_driver(&imx_driver); -} - -arch_initcall(imx_cpufreq_init); - diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c deleted file mode 100644 index 1536583..0000000 --- a/arch/arm/mach-imx/dma.c +++ /dev/null @@ -1,597 +0,0 @@ -/* - * linux/arch/arm/mach-imx/dma.c - * - * imx DMA registration and IRQ dispatching - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * 2004-03-03 Sascha Hauer <sascha@saschahauer.de> - * initial version heavily inspired by - * linux/arch/arm/mach-pxa/dma.c - * - * 2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz> - * Changed to support scatter gather DMA - * by taking Russell's code from RiscPC - * - * 2006-05-31 Pavel Pisa <pisa@cmp.felk.cvut.cz> - * Corrected error handling code. - * - */ - -#undef DEBUG - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/errno.h> - -#include <asm/scatterlist.h> -#include <asm/system.h> -#include <asm/irq.h> -#include <mach/hardware.h> -#include <mach/dma.h> -#include <mach/imx-dma.h> - -struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; - -/* - * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation - * @dma_ch: i.MX DMA channel number - * @lastcount: number of bytes transferred during last transfer - * - * Functions prepares DMA controller for next sg data chunk transfer. - * The @lastcount argument informs function about number of bytes transferred - * during last block. Zero value can be used for @lastcount to setup DMA - * for the first chunk. - */ -static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned int nextcount; - unsigned int nextaddr; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, dma_ch); - return 0; - } - - imxdma->resbytes -= lastcount; - - if (!imxdma->sg) { - pr_debug("imxdma%d: no sg data\n", dma_ch); - return 0; - } - - imxdma->sgbc += lastcount; - if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) { - if ((imxdma->sgcount <= 1) || !imxdma->resbytes) { - pr_debug("imxdma%d: sg transfer limit reached\n", - dma_ch); - imxdma->sgcount=0; - imxdma->sg = NULL; - return 0; - } else { - imxdma->sgcount--; - imxdma->sg++; - imxdma->sgbc = 0; - } - } - nextcount = imxdma->sg->length - imxdma->sgbc; - nextaddr = imxdma->sg->dma_address + imxdma->sgbc; - - if(imxdma->resbytes < nextcount) - nextcount = imxdma->resbytes; - - if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ) - DAR(dma_ch) = nextaddr; - else - SAR(dma_ch) = nextaddr; - - CNTR(dma_ch) = nextcount; - pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n", - dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch)); - - return nextcount; -} - -/* - * imx_dma_setup_sg_base - scatter-gather DMA emulation - * @dma_ch: i.MX DMA channel number - * @sg: pointer to the scatter-gather list/vector - * @sgcount: scatter-gather list hungs count - * - * Functions sets up i.MX DMA state for emulated scatter-gather transfer - * and sets up channel registers to be ready for the first chunk - */ -static int -imx_dma_setup_sg_base(imx_dmach_t dma_ch, - struct scatterlist *sg, unsigned int sgcount) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - imxdma->sg = sg; - imxdma->sgcount = sgcount; - imxdma->sgbc = 0; - return imx_dma_sg_next(dma_ch, 0); -} - -/** - * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer - * @dma_ch: i.MX DMA channel number - * @dma_address: the DMA/physical memory address of the linear data block - * to transfer - * @dma_length: length of the data block in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * The function setups DMA channel source and destination addresses for transfer - * specified by provided parameters. The scatter-gather emulation is disabled, - * because linear data block - * form the physical address range is transferred. - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - imxdma->sg = NULL; - imxdma->sgcount = 0; - imxdma->dma_mode = dmamode; - imxdma->resbytes = dma_length; - - if (!dma_address) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n", - dma_ch); - return -EINVAL; - } - - if (!dma_length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n", - dma_ch); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n", - dma_ch, (unsigned int)dma_address, dma_length, - dev_addr); - SAR(dma_ch) = dev_addr; - DAR(dma_ch) = (unsigned int)dma_address; - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n", - dma_ch, (unsigned int)dma_address, dma_length, - dev_addr); - SAR(dma_ch) = (unsigned int)dma_address; - DAR(dma_ch) = dev_addr; - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n", - dma_ch); - return -EINVAL; - } - - CNTR(dma_ch) = dma_length; - - return 0; -} - -/** - * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer - * @dma_ch: i.MX DMA channel number - * @sg: pointer to the scatter-gather list/vector - * @sgcount: scatter-gather list hungs count - * @dma_length: total length of the transfer request in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * The function sets up DMA channel state and registers to be ready for transfer - * specified by provided parameters. The scatter-gather emulation is set up - * according to the parameters. - * - * The full preparation of the transfer requires setup of more register - * by the caller before imx_dma_enable() can be called. - * - * %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes - * - * %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx - * - * %CCR(dma_ch) has to specify transfer parameters, the next settings is typical - * for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified - * - * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x - * - * The typical setup for %DMA_MODE_WRITE is specified by next options combination - * - * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x - * - * Be careful here and do not mistakenly mix source and target device - * port sizes constants, they are really different: - * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32, - * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32 - * - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_sg(imx_dmach_t dma_ch, - struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length, - unsigned int dev_addr, unsigned int dmamode) -{ - int res; - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - imxdma->sg = NULL; - imxdma->sgcount = 0; - imxdma->dma_mode = dmamode; - imxdma->resbytes = dma_length; - - if (!sg || !sgcount) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n", - dma_ch); - return -EINVAL; - } - - if (!sg->length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n", - dma_ch); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n", - dma_ch, sg, sgcount, dma_length, dev_addr); - SAR(dma_ch) = dev_addr; - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n", - dma_ch, sg, sgcount, dma_length, dev_addr); - DAR(dma_ch) = dev_addr; - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n", - dma_ch); - return -EINVAL; - } - - res = imx_dma_setup_sg_base(dma_ch, sg, sgcount); - if (res <= 0) { - printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch); - return -EINVAL; - } - - return 0; -} - -/** - * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers - * @dma_ch: i.MX DMA channel number - * @irq_handler: the pointer to the function called if the transfer - * ends successfully - * @err_handler: the pointer to the function called if the premature - * end caused by error occurs - * @data: user specified value to be passed to the handlers - */ -int -imx_dma_setup_handlers(imx_dmach_t dma_ch, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), - void *data) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned long flags; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, dma_ch); - return -ENODEV; - } - - local_irq_save(flags); - DISR = (1 << dma_ch); - imxdma->irq_handler = irq_handler; - imxdma->err_handler = err_handler; - imxdma->data = data; - local_irq_restore(flags); - return 0; -} - -/** - * imx_dma_enable - function to start i.MX DMA channel operation - * @dma_ch: i.MX DMA channel number - * - * The channel has to be allocated by driver through imx_dma_request() - * or imx_dma_request_by_prio() function. - * The transfer parameters has to be set to the channel registers through - * call of the imx_dma_setup_single() or imx_dma_setup_sg() function - * and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to - * be set prior this function call by the channel user. - */ -void imx_dma_enable(imx_dmach_t dma_ch) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_enable\n", dma_ch); - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, dma_ch); - return; - } - - local_irq_save(flags); - DISR = (1 << dma_ch); - DIMR &= ~(1 << dma_ch); - CCR(dma_ch) |= CCR_CEN; - local_irq_restore(flags); -} - -/** - * imx_dma_disable - stop, finish i.MX DMA channel operatin - * @dma_ch: i.MX DMA channel number - */ -void imx_dma_disable(imx_dmach_t dma_ch) -{ - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_disable\n", dma_ch); - - local_irq_save(flags); - DIMR |= (1 << dma_ch); - CCR(dma_ch) &= ~CCR_CEN; - DISR = (1 << dma_ch); - local_irq_restore(flags); -} - -/** - * imx_dma_request - request/allocate specified channel number - * @dma_ch: i.MX DMA channel number - * @name: the driver/caller own non-%NULL identification - */ -int imx_dma_request(imx_dmach_t dma_ch, const char *name) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned long flags; - - /* basic sanity checks */ - if (!name) - return -EINVAL; - - if (dma_ch >= IMX_DMA_CHANNELS) { - printk(KERN_CRIT "%s: called for non-existed channel %d\n", - __func__, dma_ch); - return -EINVAL; - } - - local_irq_save(flags); - if (imxdma->name) { - local_irq_restore(flags); - return -ENODEV; - } - - imxdma->name = name; - imxdma->irq_handler = NULL; - imxdma->err_handler = NULL; - imxdma->data = NULL; - imxdma->sg = NULL; - local_irq_restore(flags); - return 0; -} - -/** - * imx_dma_free - release previously acquired channel - * @dma_ch: i.MX DMA channel number - */ -void imx_dma_free(imx_dmach_t dma_ch) -{ - unsigned long flags; - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - if (!imxdma->name) { - printk(KERN_CRIT - "%s: trying to free channel %d which is already freed\n", - __func__, dma_ch); - return; - } - - local_irq_save(flags); - /* Disable interrupts */ - DIMR |= (1 << dma_ch); - CCR(dma_ch) &= ~CCR_CEN; - imxdma->name = NULL; - local_irq_restore(flags); -} - -/** - * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority - * @name: the driver/caller own non-%NULL identification - * @prio: one of the hardware distinguished priority level: - * %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW - * - * This function tries to find free channel in the specified priority group - * if the priority cannot be achieved it tries to look for free channel - * in the higher and then even lower priority groups. - * - * Return value: If there is no free channel to allocate, -%ENODEV is returned. - * On successful allocation channel is returned. - */ -imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio) -{ - int i; - int best; - - switch (prio) { - case (DMA_PRIO_HIGH): - best = 8; - break; - case (DMA_PRIO_MEDIUM): - best = 4; - break; - case (DMA_PRIO_LOW): - default: - best = 0; - break; - } - - for (i = best; i < IMX_DMA_CHANNELS; i++) { - if (!imx_dma_request(i, name)) { - return i; - } - } - - for (i = best - 1; i >= 0; i--) { - if (!imx_dma_request(i, name)) { - return i; - } - } - - printk(KERN_ERR "%s: no free DMA channel found\n", __func__); - - return -ENODEV; -} - -static irqreturn_t dma_err_handler(int irq, void *dev_id) -{ - int i, disr = DISR; - struct imx_dma_channel *channel; - unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR; - int errcode; - - DISR = disr & err_mask; - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if(!(err_mask & (1 << i))) - continue; - channel = &imx_dma_channels[i]; - errcode = 0; - - if (DBTOSR & (1 << i)) { - DBTOSR = (1 << i); - errcode |= IMX_DMA_ERR_BURST; - } - if (DRTOSR & (1 << i)) { - DRTOSR = (1 << i); - errcode |= IMX_DMA_ERR_REQUEST; - } - if (DSESR & (1 << i)) { - DSESR = (1 << i); - errcode |= IMX_DMA_ERR_TRANSFER; - } - if (DBOSR & (1 << i)) { - DBOSR = (1 << i); - errcode |= IMX_DMA_ERR_BUFFER; - } - - /* - * The cleaning of @sg field would be questionable - * there, because its value can help to compute - * remaining/transferred bytes count in the handler - */ - /*imx_dma_channels[i].sg = NULL;*/ - - if (channel->name && channel->err_handler) { - channel->err_handler(i, channel->data, errcode); - continue; - } - - imx_dma_channels[i].sg = NULL; - - printk(KERN_WARNING - "DMA timeout on channel %d (%s) -%s%s%s%s\n", - i, channel->name, - errcode&IMX_DMA_ERR_BURST? " burst":"", - errcode&IMX_DMA_ERR_REQUEST? " request":"", - errcode&IMX_DMA_ERR_TRANSFER? " transfer":"", - errcode&IMX_DMA_ERR_BUFFER? " buffer":""); - } - return IRQ_HANDLED; -} - -static irqreturn_t dma_irq_handler(int irq, void *dev_id) -{ - int i, disr = DISR; - - pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n", - disr); - - DISR = disr; - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if (disr & (1 << i)) { - struct imx_dma_channel *channel = &imx_dma_channels[i]; - if (channel->name) { - if (imx_dma_sg_next(i, CNTR(i))) { - CCR(i) &= ~CCR_CEN; - mb(); - CCR(i) |= CCR_CEN; - } else { - if (channel->irq_handler) - channel->irq_handler(i, - channel->data); - } - } else { - /* - * IRQ for an unregistered DMA channel: - * let's clear the interrupts and disable it. - */ - printk(KERN_WARNING - "spurious IRQ for DMA channel %d\n", i); - } - } - } - return IRQ_HANDLED; -} - -static int __init imx_dma_init(void) -{ - int ret; - int i; - - /* reset DMA module */ - DCR = DCR_DRST; - - ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n"); - return ret; - } - - ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register ERRIRQ for DMA\n"); - free_irq(DMA_INT, NULL); - } - - /* enable DMA module */ - DCR = DCR_DEN; - - /* clear all interrupts */ - DISR = (1 << IMX_DMA_CHANNELS) - 1; - - /* enable interrupts */ - DIMR = (1 << IMX_DMA_CHANNELS) - 1; - - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - imx_dma_channels[i].sg = NULL; - imx_dma_channels[i].dma_num = i; - } - - return ret; -} - -arch_initcall(imx_dma_init); - -EXPORT_SYMBOL(imx_dma_setup_single); -EXPORT_SYMBOL(imx_dma_setup_sg); -EXPORT_SYMBOL(imx_dma_setup_handlers); -EXPORT_SYMBOL(imx_dma_enable); -EXPORT_SYMBOL(imx_dma_disable); -EXPORT_SYMBOL(imx_dma_request); -EXPORT_SYMBOL(imx_dma_free); -EXPORT_SYMBOL(imx_dma_request_by_prio); -EXPORT_SYMBOL(imx_dma_channels); diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c deleted file mode 100644 index 05f1739..0000000 --- a/arch/arm/mach-imx/generic.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * arch/arm/mach-imx/generic.c - * - * author: Sascha Hauer - * Created: april 20th, 2004 - * Copyright: Synertronixx GmbH - * - * Common code for i.MX machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> - -#include <asm/errno.h> -#include <mach/hardware.h> -#include <mach/imx-regs.h> - -#include <asm/mach/map.h> -#include <mach/mmc.h> -#include <mach/gpio.h> - -unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG]; - -void imx_gpio_mode(int gpio_mode) -{ - unsigned int pin = gpio_mode & GPIO_PIN_MASK; - unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; - unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; - unsigned int tmp; - - /* Pullup enable */ - if(gpio_mode & GPIO_PUEN) - PUEN(port) |= (1<<pin); - else - PUEN(port) &= ~(1<<pin); - - /* Data direction */ - if(gpio_mode & GPIO_OUT) - DDIR(port) |= 1<<pin; - else - DDIR(port) &= ~(1<<pin); - - /* Primary / alternate function */ - if(gpio_mode & GPIO_AF) - GPR(port) |= (1<<pin); - else - GPR(port) &= ~(1<<pin); - - /* use as gpio? */ - if(gpio_mode & GPIO_GIUS) - GIUS(port) |= (1<<pin); - else - GIUS(port) &= ~(1<<pin); - - /* Output / input configuration */ - /* FIXME: I'm not very sure about OCR and ICONF, someone - * should have a look over it - */ - if(pin<16) { - tmp = OCR1(port); - tmp &= ~( 3<<(pin*2)); - tmp |= (ocr << (pin*2)); - OCR1(port) = tmp; - - ICONFA1(port) &= ~( 3<<(pin*2)); - ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2); - ICONFB1(port) &= ~( 3<<(pin*2)); - ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); - } else { - tmp = OCR2(port); - tmp &= ~( 3<<((pin-16)*2)); - tmp |= (ocr << ((pin-16)*2)); - OCR2(port) = tmp; - - ICONFA2(port) &= ~( 3<<((pin-16)*2)); - ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2); - ICONFB2(port) &= ~( 3<<((pin-16)*2)); - ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2); - } -} - -EXPORT_SYMBOL(imx_gpio_mode); - -int imx_gpio_request(unsigned gpio, const char *label) -{ - if(gpio >= (GPIO_PORT_MAX + 1) * 32) { - printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n", - gpio, label ? label : "?"); - return -EINVAL; - } - - if(test_and_set_bit(gpio, imx_gpio_alloc_map)) { - printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n", - gpio, label ? label : "?"); - return -EBUSY; - } - - return 0; -} - -EXPORT_SYMBOL(imx_gpio_request); - -void imx_gpio_free(unsigned gpio) -{ - if(gpio >= (GPIO_PORT_MAX + 1) * 32) - return; - - clear_bit(gpio, imx_gpio_alloc_map); -} - -EXPORT_SYMBOL(imx_gpio_free); - -int imx_gpio_direction_input(unsigned gpio) -{ - imx_gpio_mode(gpio | GPIO_IN | GPIO_GIUS | GPIO_DR); - return 0; -} - -EXPORT_SYMBOL(imx_gpio_direction_input); - -int imx_gpio_direction_output(unsigned gpio, int value) -{ - imx_gpio_set_value(gpio, value); - imx_gpio_mode(gpio | GPIO_OUT | GPIO_GIUS | GPIO_DR); - return 0; -} - -EXPORT_SYMBOL(imx_gpio_direction_output); - -int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - int alloc_mode, const char *label) -{ - const int *p = pin_list; - int i; - unsigned gpio; - unsigned mode; - - for (i = 0; i < count; i++) { - gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK); - - if (gpio >= (GPIO_PORT_MAX + 1) * 32) - goto setup_error; - - if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE) - imx_gpio_free(gpio); - else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC)) - if (imx_gpio_request(gpio, label)) - if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC)) - goto setup_error; - - if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY | - IMX_GPIO_ALLOC_MODE_RELEASE))) - imx_gpio_mode(gpio | mode); - - p++; - } - return 0; - -setup_error: - if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC | - IMX_GPIO_ALLOC_MODE_TRY_ALLOC)) - return -EINVAL; - - while (p != pin_list) { - p--; - gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - imx_gpio_free(gpio); - } - - return -EINVAL; -} - -EXPORT_SYMBOL(imx_gpio_setup_multiple_pins); - -void __imx_gpio_set_value(unsigned gpio, int value) -{ - imx_gpio_set_value_inline(gpio, value); -} - -EXPORT_SYMBOL(__imx_gpio_set_value); - -int imx_gpio_to_irq(unsigned gpio) -{ - return IRQ_GPIOA(0) + gpio; -} - -EXPORT_SYMBOL(imx_gpio_to_irq); - -int imx_irq_to_gpio(unsigned irq) -{ - if (irq < IRQ_GPIOA(0)) - return -EINVAL; - return irq - IRQ_GPIOA(0); -} - -EXPORT_SYMBOL(imx_irq_to_gpio); - -static struct resource imx_mmc_resources[] = { - [0] = { - .start = 0x00214000, - .end = 0x002140FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (SDHC_INT), - .end = (SDHC_INT), - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 imxmmmc_dmamask = 0xffffffffUL; - -static struct platform_device imx_mmc_device = { - .name = "imx-mmc", - .id = 0, - .dev = { - .dma_mask = &imxmmmc_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(imx_mmc_resources), - .resource = imx_mmc_resources, -}; - -void __init imx_set_mmc_info(struct imxmmc_platform_data *info) -{ - imx_mmc_device.dev.platform_data = info; -} - -static struct platform_device *devices[] __initdata = { - &imx_mmc_device, -}; - -static struct map_desc imx_io_desc[] __initdata = { - { - .virtual = IMX_IO_BASE, - .pfn = __phys_to_pfn(IMX_IO_PHYS), - .length = IMX_IO_SIZE, - .type = MT_DEVICE - } -}; - -void __init -imx_map_io(void) -{ - iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); -} - -static int __init imx_init(void) -{ - return platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -subsys_initcall(imx_init); diff --git a/arch/arm/mach-imx/generic.h b/arch/arm/mach-imx/generic.h deleted file mode 100644 index e91003e..0000000 --- a/arch/arm/mach-imx/generic.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * linux/arch/arm/mach-imx/generic.h - * - * Author: Sascha Hauer <sascha@saschahauer.de> - * Copyright: Synertronixx GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -extern void __init imx_map_io(void); -extern void __init imx_init_irq(void); - -struct sys_timer; -extern struct sys_timer imx_timer; diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S deleted file mode 100644 index 87802bbf..0000000 --- a/arch/arm/mach-imx/include/mach/debug-macro.S +++ /dev/null @@ -1,34 +0,0 @@ -/* arch/arm/mach-imx/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x00000000 @ physical - movne \rx, #0xe0000000 @ virtual - orreq \rx, \rx, #0x00200000 @ physical - orr \rx, \rx, #0x00006000 @ UART1 offset - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x40] @ TXDATA - .endm - - .macro waituart,rd,rx - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x98] @ SR2 - tst \rd, #1 << 3 @ TXDC - beq 1002b @ wait until transmit done - .endm diff --git a/arch/arm/mach-imx/include/mach/dma.h b/arch/arm/mach-imx/include/mach/dma.h deleted file mode 100644 index 621ff2c..0000000 --- a/arch/arm/mach-imx/include/mach/dma.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * linux/include/asm-arm/imxads/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -typedef enum { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -} imx_dma_prio; - -#define DMA_REQ_UART3_T 2 -#define DMA_REQ_UART3_R 3 -#define DMA_REQ_SSI2_T 4 -#define DMA_REQ_SSI2_R 5 -#define DMA_REQ_CSI_STAT 6 -#define DMA_REQ_CSI_R 7 -#define DMA_REQ_MSHC 8 -#define DMA_REQ_DSPA_DCT_DOUT 9 -#define DMA_REQ_DSPA_DCT_DIN 10 -#define DMA_REQ_DSPA_MAC 11 -#define DMA_REQ_EXT 12 -#define DMA_REQ_SDHC 13 -#define DMA_REQ_SPI1_R 14 -#define DMA_REQ_SPI1_T 15 -#define DMA_REQ_SSI_T 16 -#define DMA_REQ_SSI_R 17 -#define DMA_REQ_ASP_DAC 18 -#define DMA_REQ_ASP_ADC 19 -#define DMA_REQ_USP_EP(x) (20+(x)) -#define DMA_REQ_SPI2_R 26 -#define DMA_REQ_SPI2_T 27 -#define DMA_REQ_UART2_T 28 -#define DMA_REQ_UART2_R 29 -#define DMA_REQ_UART1_T 30 -#define DMA_REQ_UART1_R 31 - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S deleted file mode 100644 index e4db679..0000000 --- a/arch/arm/mach-imx/include/mach/entry-macro.S +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for iMX-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <mach/hardware.h> - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - -#define AITC_NIVECSR 0x40 - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =IO_ADDRESS(IMX_AITC_BASE) - @ Load offset & priority of the highest priority - @ interrupt pending. - ldr \irqstat, [\base, #AITC_NIVECSR] - @ Shift off the priority leaving the offset or - @ "interrupt number", use arithmetic shift to - @ transform illegal source (0xffff) as -1 - mov \irqnr, \irqstat, asr #16 - adds \tmp, \irqnr, #1 - .endm diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h deleted file mode 100644 index 6c2942f..0000000 --- a/arch/arm/mach-imx/include/mach/gpio.h +++ /dev/null @@ -1,106 +0,0 @@ -#ifndef _IMX_GPIO_H - -#include <linux/kernel.h> -#include <mach/hardware.h> -#include <mach/imx-regs.h> - -#define IMX_GPIO_ALLOC_MODE_NORMAL 0 -#define IMX_GPIO_ALLOC_MODE_NO_ALLOC 1 -#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC 2 -#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY 4 -#define IMX_GPIO_ALLOC_MODE_RELEASE 8 - -extern int imx_gpio_request(unsigned gpio, const char *label); - -extern void imx_gpio_free(unsigned gpio); - -extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - int alloc_mode, const char *label); - -extern int imx_gpio_direction_input(unsigned gpio); - -extern int imx_gpio_direction_output(unsigned gpio, int value); - -extern void __imx_gpio_set_value(unsigned gpio, int value); - -static inline int imx_gpio_get_value(unsigned gpio) -{ - return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK)); -} - -static inline void imx_gpio_set_value_inline(unsigned gpio, int value) -{ - unsigned long flags; - - raw_local_irq_save(flags); - if(value) - DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK)); - else - DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK)); - raw_local_irq_restore(flags); -} - -static inline void imx_gpio_set_value(unsigned gpio, int value) -{ - if(__builtin_constant_p(gpio)) - imx_gpio_set_value_inline(gpio, value); - else - __imx_gpio_set_value(gpio, value); -} - -extern int imx_gpio_to_irq(unsigned gpio); - -extern int imx_irq_to_gpio(unsigned irq); - -/*-------------------------------------------------------------------------*/ - -/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions - * to allow future extension of GPIO logic. - */ - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return imx_gpio_request(gpio, label); -} - -static inline void gpio_free(unsigned gpio) -{ - might_sleep(); - - imx_gpio_free(gpio); -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return imx_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return imx_gpio_direction_output(gpio, value); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return imx_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - imx_gpio_set_value(gpio, value); -} - -#include <asm-generic/gpio.h> /* cansleep wrappers */ - -static inline int gpio_to_irq(unsigned gpio) -{ - return imx_gpio_to_irq(gpio); -} - -static inline int irq_to_gpio(unsigned irq) -{ - return imx_irq_to_gpio(irq); -} - - -#endif diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h deleted file mode 100644 index c73e9e7..0000000 --- a/arch/arm/mach-imx/include/mach/hardware.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/hardware.h - * - * Copyright (C) 1999 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <asm/sizes.h> -#include "imx-regs.h" - -#ifndef __ASSEMBLY__ -# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x))) - -# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) -#endif - -/* - * Memory map - */ - -#define IMX_IO_PHYS 0x00200000 -#define IMX_IO_SIZE 0x00100000 -#define IMX_IO_BASE 0xe0000000 - -#define IMX_CS0_PHYS 0x10000000 -#define IMX_CS0_SIZE 0x02000000 -#define IMX_CS0_VIRT 0xe8000000 - -#define IMX_CS1_PHYS 0x12000000 -#define IMX_CS1_SIZE 0x01000000 -#define IMX_CS1_VIRT 0xea000000 - -#define IMX_CS2_PHYS 0x13000000 -#define IMX_CS2_SIZE 0x01000000 -#define IMX_CS2_VIRT 0xeb000000 - -#define IMX_CS3_PHYS 0x14000000 -#define IMX_CS3_SIZE 0x01000000 -#define IMX_CS3_VIRT 0xec000000 - -#define IMX_CS4_PHYS 0x15000000 -#define IMX_CS4_SIZE 0x01000000 -#define IMX_CS4_VIRT 0xed000000 - -#define IMX_CS5_PHYS 0x16000000 -#define IMX_CS5_SIZE 0x01000000 -#define IMX_CS5_VIRT 0xee000000 - -#define IMX_FB_VIRT 0xF1000000 -#define IMX_FB_SIZE (256*1024) - -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((x) | IMX_IO_BASE) - -#ifndef __ASSEMBLY__ -/* - * Handy routine to set GPIO functions - */ -extern void imx_gpio_mode( int gpio_mode ); - -#endif - -#define MAXIRQNUM 62 -#define MAXFIQNUM 62 -#define MAXSWINUM 62 - -/* - * Use SDRAM for memory - */ -#define MEM_SIZE 0x01000000 - -#ifdef CONFIG_ARCH_MX1ADS -#include "mx1ads.h" -#endif - -#endif diff --git a/arch/arm/mach-imx/include/mach/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h deleted file mode 100644 index bbe54df..0000000 --- a/arch/arm/mach-imx/include/mach/imx-dma.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * linux/include/asm-arm/imxads/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <mach/dma.h> - -#ifndef __ASM_ARCH_IMX_DMA_H -#define __ASM_ARCH_IMX_DMA_H - -#define IMX_DMA_CHANNELS 11 - -/* - * struct imx_dma_channel - i.MX specific DMA extension - * @name: name specified by DMA client - * @irq_handler: client callback for end of transfer - * @err_handler: client callback for error condition - * @data: clients context data for callbacks - * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE - * @sg: pointer to the actual read/written chunk for scatter-gather emulation - * @sgbc: counter of processed bytes in the actual read/written chunk - * @resbytes: total residual number of bytes to transfer - * (it can be lower or same as sum of SG mapped chunk sizes) - * @sgcount: number of chunks to be read/written - * - * Structure is used for IMX DMA processing. It would be probably good - * @struct dma_struct in the future for external interfacing and use - * @struct imx_dma_channel only as extension to it. - */ - -struct imx_dma_channel { - const char *name; - void (*irq_handler) (int, void *); - void (*err_handler) (int, void *, int errcode); - void *data; - unsigned int dma_mode; - struct scatterlist *sg; - unsigned int sgbc; - unsigned int sgcount; - unsigned int resbytes; - int dma_num; -}; - -extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; - -#define IMX_DMA_ERR_BURST 1 -#define IMX_DMA_ERR_REQUEST 2 -#define IMX_DMA_ERR_TRANSFER 4 -#define IMX_DMA_ERR_BUFFER 8 - -/* The type to distinguish channel numbers parameter from ordinal int type */ -typedef int imx_dmach_t; - -#define DMA_MODE_READ 0 -#define DMA_MODE_WRITE 1 -#define DMA_MODE_MASK 1 - -int -imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode); - -int -imx_dma_setup_sg(imx_dmach_t dma_ch, - struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length, - unsigned int dev_addr, unsigned int dmamode); - -int -imx_dma_setup_handlers(imx_dmach_t dma_ch, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), void *data); - -void imx_dma_enable(imx_dmach_t dma_ch); - -void imx_dma_disable(imx_dmach_t dma_ch); - -int imx_dma_request(imx_dmach_t dma_ch, const char *name); - -void imx_dma_free(imx_dmach_t dma_ch); - -imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio); - - -#endif /* _ASM_ARCH_IMX_DMA_H */ diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h deleted file mode 100644 index 490297f..0000000 --- a/arch/arm/mach-imx/include/mach/imx-regs.h +++ /dev/null @@ -1,376 +0,0 @@ -#ifndef _IMX_REGS_H -#define _IMX_REGS_H -/* ------------------------------------------------------------------------ - * Motorola IMX system registers - * ------------------------------------------------------------------------ - * - */ - -/* - * Register BASEs, based on OFFSETs - * - */ -#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE) -#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE) -#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE) -#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE) -#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE) -#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE) -#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE) -#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE) -#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE) -#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE) -#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE) -#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE) -#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE) -#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE) -#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE) -#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE) -#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE) -#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE) -#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE) -#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE) -#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE) -#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE) -#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE) -#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE) -#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE) -#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE) -#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE) -#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE) - -/* PLL registers */ -#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */ -#define CSCR_SPLL_RESTART (1<<22) -#define CSCR_MPLL_RESTART (1<<21) -#define CSCR_SYSTEM_SEL (1<<16) -#define CSCR_BCLK_DIV (0xf<<10) -#define CSCR_MPU_PRESC (1<<15) -#define CSCR_SPEN (1<<1) -#define CSCR_MPEN (1<<0) - -#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */ -#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */ -#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */ -#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */ -#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */ - -/* - * GPIO Module and I/O Multiplexer - * x = 0..3 for reg_A, reg_B, reg_C, reg_D - */ -#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8) -#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8) -#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8) -#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8) -#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8) -#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8) -#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8) -#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8) -#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8) -#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8) -#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8) -#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8) -#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8) -#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8) -#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8) -#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8) -#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8) - -#define GPIO_PORT_MAX 3 - -#define GPIO_PIN_MASK 0x1f -#define GPIO_PORT_MASK (0x3 << 5) - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORTA (0<<5) -#define GPIO_PORTB (1<<5) -#define GPIO_PORTC (2<<5) -#define GPIO_PORTD (3<<5) - -#define GPIO_OUT (1<<7) -#define GPIO_IN (0<<7) -#define GPIO_PUEN (1<<8) - -#define GPIO_PF (0<<9) -#define GPIO_AF (1<<9) - -#define GPIO_OCR_SHIFT 10 -#define GPIO_OCR_MASK (3<<10) -#define GPIO_AIN (0<<10) -#define GPIO_BIN (1<<10) -#define GPIO_CIN (2<<10) -#define GPIO_DR (3<<10) - -#define GPIO_AOUT_SHIFT 12 -#define GPIO_AOUT_MASK (3<<12) -#define GPIO_AOUT (0<<12) -#define GPIO_AOUT_ISR (1<<12) -#define GPIO_AOUT_0 (2<<12) -#define GPIO_AOUT_1 (3<<12) - -#define GPIO_BOUT_SHIFT 14 -#define GPIO_BOUT_MASK (3<<14) -#define GPIO_BOUT (0<<14) -#define GPIO_BOUT_ISR (1<<14) -#define GPIO_BOUT_0 (2<<14) -#define GPIO_BOUT_1 (3<<14) - -#define GPIO_GIUS (1<<16) - -/* assignements for GPIO alternate/primary functions */ - -/* FIXME: This list is not completed. The correct directions are - * missing on some (many) pins - */ -#define PA0_AIN_SPI2_CLK ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 ) -#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 ) -#define PA1_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 ) -#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 ) -#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 ) -#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 ) -#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 ) -#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 ) -#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 ) -#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 ) -#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 ) -#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 ) -#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 ) -#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 ) -#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 ) -#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 ) -#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 ) -#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 ) -#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 ) -#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 ) -#define PA17_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 ) -#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 ) -#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 ) -#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 ) -#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 ) -#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 ) -#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 ) -#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 ) -#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 ) -#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 ) -#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 ) -#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 ) -#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 ) -#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 ) -#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 ) -#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 ) -#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 ) -#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 ) -#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 ) -#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 ) -#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 ) -#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 ) -#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 ) -#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 ) -#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 ) -#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 ) -#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 ) -#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 ) -#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 ) -#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 ) -#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 ) -#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 ) -#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 ) -#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 ) -#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 ) -#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 ) -#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 ) -#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 ) -#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 ) -#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 ) -#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 ) -#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 ) -#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 ) -#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 ) -#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 ) -#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 ) -#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 ) -#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 ) -#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 ) -#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 ) -#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 ) -#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 ) -#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 ) -#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 ) -#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 ) -#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 ) -#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 ) -#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 ) -#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 ) -#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 ) -#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 ) -#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 ) -#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 ) -#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 ) -#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 ) -#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 ) -#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 ) -#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 ) -#define PC24_BIN_UART3_RI ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 ) -#define PC25_BIN_UART3_DSR ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 ) -#define PC26_AOUT_UART3_DTR ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 ) -#define PC27_BIN_UART3_DCD ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 ) -#define PC28_BIN_UART3_CTS ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 ) -#define PC29_AOUT_UART3_RTS ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 ) -#define PC30_BIN_UART3_TX ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 ) -#define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31) -#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 ) -#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 ) -#define PD7_AF_UART2_DTR ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 ) -#define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 ) -#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 ) -#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 ) -#define PD8_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 ) -#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 ) -#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 ) -#define PD9_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 ) -#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 ) -#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 ) -#define PD10_AIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 ) -#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 ) -#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 ) -#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 ) -#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 ) -#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 ) -#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 ) -#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 ) -#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 ) -#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 ) -#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 ) -#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 ) -#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 ) -#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 ) -#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 ) -#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 ) -#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 ) -#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 ) -#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 ) -#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 ) -#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 ) -#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 ) -#define PD31_BIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 ) - -/* - * PWM controller - */ -#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */ -#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */ -#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */ -#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */ - -#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */ -#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */ -#define PWMC_SWR (0x01<<16) /* Software Reset */ -#define PWMC_CLKSRC (0x01<<15) /* Clock Source */ -#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */ -#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */ -#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */ -#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */ -#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */ -#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */ -#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */ - -#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */ -#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */ -#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */ - -/* - * DMA Controller - */ -#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */ -#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */ -#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */ -#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */ -#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */ -#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */ -#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */ -#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */ -#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */ -#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */ -#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */ -#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */ -#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */ -#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */ -#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */ -#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */ -#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */ -#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */ -#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */ -#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */ -#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */ -#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */ - -#define DCR_DRST (1<<1) -#define DCR_DEN (1<<0) -#define DBTOCR_EN (1<<15) -#define DBTOCR_CNT(x) ((x) & 0x7fff ) -#define CNTR_CNT(x) ((x) & 0xffffff ) -#define CCR_DMOD_LINEAR ( 0x0 << 12 ) -#define CCR_DMOD_2D ( 0x1 << 12 ) -#define CCR_DMOD_FIFO ( 0x2 << 12 ) -#define CCR_DMOD_EOBFIFO ( 0x3 << 12 ) -#define CCR_SMOD_LINEAR ( 0x0 << 10 ) -#define CCR_SMOD_2D ( 0x1 << 10 ) -#define CCR_SMOD_FIFO ( 0x2 << 10 ) -#define CCR_SMOD_EOBFIFO ( 0x3 << 10 ) -#define CCR_MDIR_DEC (1<<9) -#define CCR_MSEL_B (1<<8) -#define CCR_DSIZ_32 ( 0x0 << 6 ) -#define CCR_DSIZ_8 ( 0x1 << 6 ) -#define CCR_DSIZ_16 ( 0x2 << 6 ) -#define CCR_SSIZ_32 ( 0x0 << 4 ) -#define CCR_SSIZ_8 ( 0x1 << 4 ) -#define CCR_SSIZ_16 ( 0x2 << 4 ) -#define CCR_REN (1<<3) -#define CCR_RPT (1<<2) -#define CCR_FRC (1<<1) -#define CCR_CEN (1<<0) -#define RTOR_EN (1<<15) -#define RTOR_CLK (1<<14) -#define RTOR_PSC (1<<13) - -/* - * Interrupt controller - */ - -#define IMX_INTCNTL __REG(IMX_AITC_BASE+0x00) -#define INTCNTL_FIAD (1<<19) -#define INTCNTL_NIAD (1<<20) - -#define IMX_NIMASK __REG(IMX_AITC_BASE+0x04) -#define IMX_INTENNUM __REG(IMX_AITC_BASE+0x08) -#define IMX_INTDISNUM __REG(IMX_AITC_BASE+0x0c) -#define IMX_INTENABLEH __REG(IMX_AITC_BASE+0x10) -#define IMX_INTENABLEL __REG(IMX_AITC_BASE+0x14) - -/* - * General purpose timers - */ -#define IMX_TCTL(x) __REG( 0x00 + (x)) -#define TCTL_SWR (1<<15) -#define TCTL_FRR (1<<8) -#define TCTL_CAP_RIS (1<<6) -#define TCTL_CAP_FAL (2<<6) -#define TCTL_CAP_RIS_FAL (3<<6) -#define TCTL_OM (1<<5) -#define TCTL_IRQEN (1<<4) -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_16 (2<<1) -#define TCTL_CLK_TIN (3<<1) -#define TCTL_CLK_32 (4<<1) -#define TCTL_TEN (1<<0) - -#define IMX_TPRER(x) __REG( 0x04 + (x)) -#define IMX_TCMP(x) __REG( 0x08 + (x)) -#define IMX_TCR(x) __REG( 0x0C + (x)) -#define IMX_TCN(x) __REG( 0x10 + (x)) -#define IMX_TSTAT(x) __REG( 0x14 + (x)) -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -#endif // _IMX_REGS_H diff --git a/arch/arm/mach-imx/include/mach/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h deleted file mode 100644 index d54eb1d..0000000 --- a/arch/arm/mach-imx/include/mach/imx-uart.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef ASMARM_ARCH_UART_H -#define ASMARM_ARCH_UART_H - -#define IMXUART_HAVE_RTSCTS (1<<0) - -struct imxuart_platform_data { - int (*init)(struct platform_device *pdev); - void (*exit)(struct platform_device *pdev); - unsigned int flags; -}; - -#endif diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h deleted file mode 100644 index 67812c5a..0000000 --- a/arch/arm/mach-imx/include/mach/irqs.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * arch/arm/mach-imxads/include/mach/irqs.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ARM_IRQS_H__ -#define __ARM_IRQS_H__ - -/* Use the imx definitions */ -#include <mach/hardware.h> - -/* - * IMX Interrupt numbers - * - */ -#define INT_SOFTINT 0 -#define CSI_INT 6 -#define DSPA_MAC_INT 7 -#define DSPA_INT 8 -#define COMP_INT 9 -#define MSHC_XINT 10 -#define GPIO_INT_PORTA 11 -#define GPIO_INT_PORTB 12 -#define GPIO_INT_PORTC 13 -#define LCDC_INT 14 -#define SIM_INT 15 -#define SIM_DATA_INT 16 -#define RTC_INT 17 -#define RTC_SAMINT 18 -#define UART2_MINT_PFERR 19 -#define UART2_MINT_RTS 20 -#define UART2_MINT_DTR 21 -#define UART2_MINT_UARTC 22 -#define UART2_MINT_TX 23 -#define UART2_MINT_RX 24 -#define UART1_MINT_PFERR 25 -#define UART1_MINT_RTS 26 -#define UART1_MINT_DTR 27 -#define UART1_MINT_UARTC 28 -#define UART1_MINT_TX 29 -#define UART1_MINT_RX 30 -#define VOICE_DAC_INT 31 -#define VOICE_ADC_INT 32 -#define PEN_DATA_INT 33 -#define PWM_INT 34 -#define SDHC_INT 35 -#define I2C_INT 39 -#define CSPI_INT 41 -#define SSI_TX_INT 42 -#define SSI_TX_ERR_INT 43 -#define SSI_RX_INT 44 -#define SSI_RX_ERR_INT 45 -#define TOUCH_INT 46 -#define USBD_INT0 47 -#define USBD_INT1 48 -#define USBD_INT2 49 -#define USBD_INT3 50 -#define USBD_INT4 51 -#define USBD_INT5 52 -#define USBD_INT6 53 -#define BTSYS_INT 55 -#define BTTIM_INT 56 -#define BTWUI_INT 57 -#define TIM2_INT 58 -#define TIM1_INT 59 -#define DMA_ERR 60 -#define DMA_INT 61 -#define GPIO_INT_PORTD 62 - -#define IMX_IRQS (64) - -/* note: the IMX has four gpio ports (A-D), but only - * the following pins are connected to the outside - * world: - * - * PORT A: bits 0-31 - * PORT B: bits 8-31 - * PORT C: bits 3-17 - * PORT D: bits 6-31 - * - * We map these interrupts straight on. As a result we have - * several holes in the interrupt mapping. We do this for two - * reasons: - * - mapping the interrupts without holes would get - * far more complicated - * - Motorola could well decide to bring some processor - * with more pins connected - */ - -#define IRQ_GPIOA(x) (IMX_IRQS + x) -#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) -#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) -#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) - -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5) - -/* all normal IRQs can be FIQs */ -#define FIQ_START 0 -/* switch betwean IRQ and FIQ */ -extern int imx_set_irq_fiq(unsigned int irq, unsigned int type); - -#define NR_IRQS (IRQ_GPIOD(32) + 1) -#define IRQ_GPIO(x) -#endif diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-imx/include/mach/memory.h deleted file mode 100644 index a93df7c..0000000 --- a/arch/arm/mach-imx/include/mach/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/memory.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MMU_H -#define __ASM_ARCH_MMU_H - -#define PHYS_OFFSET UL(0x08000000) - -#endif diff --git a/arch/arm/mach-imx/include/mach/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h deleted file mode 100644 index 4712f35..0000000 --- a/arch/arm/mach-imx/include/mach/mmc.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef ASMARM_ARCH_MMC_H -#define ASMARM_ARCH_MMC_H - -#include <linux/mmc/host.h> - -struct device; - -struct imxmmc_platform_data { - int (*card_present)(struct device *); - int (*get_ro)(struct device *); -}; - -extern void imx_set_mmc_info(struct imxmmc_platform_data *info); - -#endif diff --git a/arch/arm/mach-imx/include/mach/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h deleted file mode 100644 index 4186430..0000000 --- a/arch/arm/mach-imx/include/mach/spi_imx.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/spi_imx.h - * - * Copyright (C) 2006 SWAPP - * Andrea Paterniani <a.paterniani@swapp-eng.it> - * - * Initial version inspired by: - * linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef SPI_IMX_H_ -#define SPI_IMX_H_ - - -/*-------------------------------------------------------------------------*/ -/** - * struct spi_imx_master - device.platform_data for SPI controller devices. - * @num_chipselect: chipselects are used to distinguish individual - * SPI slaves, and are numbered from zero to num_chipselects - 1. - * each slave has a chipselect signal, but it's common that not - * every chipselect is connected to a slave. - * @enable_dma: if true enables DMA driven transfers. -*/ -struct spi_imx_master { - u8 num_chipselect; - u8 enable_dma:1; -}; -/*-------------------------------------------------------------------------*/ - - -/*-------------------------------------------------------------------------*/ -/** - * struct spi_imx_chip - spi_board_info.controller_data for SPI - * slave devices, copied to spi_device.controller_data. - * @enable_loopback : used for test purpouse to internally connect RX and TX - * sections. - * @enable_dma : enables dma transfer (provided that controller driver has - * dma enabled too). - * @ins_ss_pulse : enable /SS pulse insertion between SPI burst. - * @bclk_wait : number of bclk waits between each bits_per_word SPI burst. - * @cs_control : function pointer to board-specific function to assert/deassert - * I/O port to control HW generation of devices chip-select. -*/ -struct spi_imx_chip { - u8 enable_loopback:1; - u8 enable_dma:1; - u8 ins_ss_pulse:1; - u16 bclk_wait:15; - void (*cs_control)(u32 control); -}; - -/* Chip-select state */ -#define SPI_CS_ASSERT (1 << 0) -#define SPI_CS_DEASSERT (1 << 1) -/*-------------------------------------------------------------------------*/ - - -#endif /* SPI_IMX_H_*/ diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-imx/include/mach/system.h deleted file mode 100644 index 46d4ca9..0000000 --- a/arch/arm/mach-imx/include/mach/system.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * arch/arm/mach-imxads/include/mach/system.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void -arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -static inline void -arch_reset(char mode, const char *cmd) -{ - cpu_reset(0); -} - -#endif diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h deleted file mode 100644 index 70523e67..0000000 --- a/arch/arm/mach-imx/include/mach/uncompress.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * arch/arm/mach-imxads/include/mach/uncompress.h - * - * - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) - -#define UART1_BASE 0x206000 -#define UART2_BASE 0x207000 -#define USR2 0x98 -#define USR2_TXFE (1<<14) -#define TXR 0x40 -#define UCR1 0x80 -#define UCR1_UARTEN 1 - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ -static void putc(int c) -{ - unsigned long serial_port; - - do { - serial_port = UART1_BASE; - if ( UART(UCR1) & UCR1_UARTEN ) - break; - serial_port = UART2_BASE; - if ( UART(UCR1) & UCR1_UARTEN ) - break; - return; - } while(0); - - while (!(UART(USR2) & USR2_TXFE)) - barrier(); - - UART(TXR) = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#define arch_decomp_wdog() diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/mach-imx/include/mach/vmalloc.h deleted file mode 100644 index 7d7cb0b..0000000 --- a/arch/arm/mach-imx/include/mach/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/vmalloc.h - * - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c deleted file mode 100644 index 531b95d..0000000 --- a/arch/arm/mach-imx/irq.c +++ /dev/null @@ -1,311 +0,0 @@ -/* - * linux/arch/arm/mach-imx/irq.c - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * 03/03/2004 Sascha Hauer <sascha@saschahauer.de> - * Copied from the motorola bsp package and added gpio demux - * interrupt handler - */ - -#include <linux/init.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -/* - * - * We simply use the ENABLE DISABLE registers inside of the IMX - * to turn on/off specific interrupts. - * - */ - -#define INTCNTL_OFF 0x00 -#define NIMASK_OFF 0x04 -#define INTENNUM_OFF 0x08 -#define INTDISNUM_OFF 0x0C -#define INTENABLEH_OFF 0x10 -#define INTENABLEL_OFF 0x14 -#define INTTYPEH_OFF 0x18 -#define INTTYPEL_OFF 0x1C -#define NIPRIORITY_OFF(x) (0x20+4*(7-(x))) -#define NIVECSR_OFF 0x40 -#define FIVECSR_OFF 0x44 -#define INTSRCH_OFF 0x48 -#define INTSRCL_OFF 0x4C -#define INTFRCH_OFF 0x50 -#define INTFRCL_OFF 0x54 -#define NIPNDH_OFF 0x58 -#define NIPNDL_OFF 0x5C -#define FIPNDH_OFF 0x60 -#define FIPNDL_OFF 0x64 - -#define VA_AITC_BASE IO_ADDRESS(IMX_AITC_BASE) -#define IMX_AITC_INTCNTL (VA_AITC_BASE + INTCNTL_OFF) -#define IMX_AITC_NIMASK (VA_AITC_BASE + NIMASK_OFF) -#define IMX_AITC_INTENNUM (VA_AITC_BASE + INTENNUM_OFF) -#define IMX_AITC_INTDISNUM (VA_AITC_BASE + INTDISNUM_OFF) -#define IMX_AITC_INTENABLEH (VA_AITC_BASE + INTENABLEH_OFF) -#define IMX_AITC_INTENABLEL (VA_AITC_BASE + INTENABLEL_OFF) -#define IMX_AITC_INTTYPEH (VA_AITC_BASE + INTTYPEH_OFF) -#define IMX_AITC_INTTYPEL (VA_AITC_BASE + INTTYPEL_OFF) -#define IMX_AITC_NIPRIORITY(x) (VA_AITC_BASE + NIPRIORITY_OFF(x)) -#define IMX_AITC_NIVECSR (VA_AITC_BASE + NIVECSR_OFF) -#define IMX_AITC_FIVECSR (VA_AITC_BASE + FIVECSR_OFF) -#define IMX_AITC_INTSRCH (VA_AITC_BASE + INTSRCH_OFF) -#define IMX_AITC_INTSRCL (VA_AITC_BASE + INTSRCL_OFF) -#define IMX_AITC_INTFRCH (VA_AITC_BASE + INTFRCH_OFF) -#define IMX_AITC_INTFRCL (VA_AITC_BASE + INTFRCL_OFF) -#define IMX_AITC_NIPNDH (VA_AITC_BASE + NIPNDH_OFF) -#define IMX_AITC_NIPNDL (VA_AITC_BASE + NIPNDL_OFF) -#define IMX_AITC_FIPNDH (VA_AITC_BASE + FIPNDH_OFF) -#define IMX_AITC_FIPNDL (VA_AITC_BASE + FIPNDL_OFF) - -#if 0 -#define DEBUG_IRQ(fmt...) printk(fmt) -#else -#define DEBUG_IRQ(fmt...) do { } while (0) -#endif - -static void -imx_mask_irq(unsigned int irq) -{ - __raw_writel(irq, IMX_AITC_INTDISNUM); -} - -static void -imx_unmask_irq(unsigned int irq) -{ - __raw_writel(irq, IMX_AITC_INTENNUM); -} - -#ifdef CONFIG_FIQ -int imx_set_irq_fiq(unsigned int irq, unsigned int type) -{ - unsigned int irqt; - - if (irq >= IMX_IRQS) - return -EINVAL; - - if (irq < IMX_IRQS / 2) { - irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL); - } else { - irq -= IMX_IRQS / 2; - irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH); - } - - return 0; -} -EXPORT_SYMBOL(imx_set_irq_fiq); -#endif /* CONFIG_FIQ */ - -static int -imx_gpio_irq_type(unsigned int _irq, unsigned int type) -{ - unsigned int irq_type = 0, irq, reg, bit; - - irq = _irq - IRQ_GPIOA(0); - reg = irq >> 5; - bit = 1 << (irq % 32); - - if (type == IRQ_TYPE_PROBE) { - /* Don't mess with enabled GPIOs using preconfigured edges or - GPIOs set to alternate function during probe */ - /* TODO: support probe */ -// if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) & -// GPIO_bit(gpio)) -// return 0; -// if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2))) -// return 0; -// type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - } - - GIUS(reg) |= bit; - DDIR(reg) &= ~(bit); - - DEBUG_IRQ("setting type of irq %d to ", _irq); - - if (type & IRQ_TYPE_EDGE_RISING) { - DEBUG_IRQ("rising edges\n"); - irq_type = 0x0; - } - if (type & IRQ_TYPE_EDGE_FALLING) { - DEBUG_IRQ("falling edges\n"); - irq_type = 0x1; - } - if (type & IRQ_TYPE_LEVEL_LOW) { - DEBUG_IRQ("low level\n"); - irq_type = 0x3; - } - if (type & IRQ_TYPE_LEVEL_HIGH) { - DEBUG_IRQ("high level\n"); - irq_type = 0x2; - } - - if (irq % 32 < 16) { - ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) | - (irq_type << ((irq % 16) * 2)); - } else { - ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) | - (irq_type << ((irq % 16) * 2)); - } - - return 0; - -} - -static void -imx_gpio_ack_irq(unsigned int irq) -{ - DEBUG_IRQ("%s: irq %d\n", __func__, irq); - ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32); -} - -static void -imx_gpio_mask_irq(unsigned int irq) -{ - DEBUG_IRQ("%s: irq %d\n", __func__, irq); - IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32)); -} - -static void -imx_gpio_unmask_irq(unsigned int irq) -{ - DEBUG_IRQ("%s: irq %d\n", __func__, irq); - IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32); -} - -static void -imx_gpio_handler(unsigned int mask, unsigned int irq, - struct irq_desc *desc) -{ - while (mask) { - if (mask & 1) { - DEBUG_IRQ("handling irq %d\n", irq); - generic_handle_irq(irq); - } - irq++; - mask >>= 1; - } -} - -static void -imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(0); - irq = IRQ_GPIOA(0); - imx_gpio_handler(mask, irq, desc); -} - -static void -imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(1); - irq = IRQ_GPIOB(0); - imx_gpio_handler(mask, irq, desc); -} - -static void -imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(2); - irq = IRQ_GPIOC(0); - imx_gpio_handler(mask, irq, desc); -} - -static void -imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(3); - irq = IRQ_GPIOD(0); - imx_gpio_handler(mask, irq, desc); -} - -static struct irq_chip imx_internal_chip = { - .name = "MPU", - .ack = imx_mask_irq, - .mask = imx_mask_irq, - .unmask = imx_unmask_irq, -}; - -static struct irq_chip imx_gpio_chip = { - .name = "GPIO", - .ack = imx_gpio_ack_irq, - .mask = imx_gpio_mask_irq, - .unmask = imx_gpio_unmask_irq, - .set_type = imx_gpio_irq_type, -}; - -void __init -imx_init_irq(void) -{ - unsigned int irq; - - DEBUG_IRQ("Initializing imx interrupts\n"); - - /* Disable all interrupts initially. */ - /* Do not rely on the bootloader. */ - __raw_writel(0, IMX_AITC_INTENABLEH); - __raw_writel(0, IMX_AITC_INTENABLEL); - - /* Mask all GPIO interrupts as well */ - IMR(0) = 0; - IMR(1) = 0; - IMR(2) = 0; - IMR(3) = 0; - - for (irq = 0; irq < IMX_IRQS; irq++) { - set_irq_chip(irq, &imx_internal_chip); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) { - set_irq_chip(irq, &imx_gpio_chip); - set_irq_handler(irq, handle_edge_irq); - set_irq_flags(irq, IRQF_VALID); - } - - set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler); - set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler); - set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler); - set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler); - - /* Release masking of interrupts according to priority */ - __raw_writel(-1, IMX_AITC_NIMASK); - -#ifdef CONFIG_FIQ - /* Initialize FIQ */ - init_FIQ(); -#endif -} diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c deleted file mode 100644 index 1d48f27..0000000 --- a/arch/arm/mach-imx/leds-mx1ads.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * linux/arch/arm/mach-imx/leds-mx1ads.c - * - * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de> - * - * Original (leds-footbridge.c) by Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/system.h> -#include <asm/leds.h> -#include "leds.h" - -/* - * The MX1ADS Board has only one usable LED, - * so select only the timer led or the - * cpu usage led - */ -void -mx1ads_leds_event(led_event_t ledevt) -{ - unsigned long flags; - - local_irq_save(flags); - - switch (ledevt) { -#ifdef CONFIG_LEDS_CPU - case led_idle_start: - DR(0) &= ~(1<<2); - break; - - case led_idle_end: - DR(0) |= 1<<2; - break; -#endif - -#ifdef CONFIG_LEDS_TIMER - case led_timer: - DR(0) ^= 1<<2; -#endif - default: - break; - } - local_irq_restore(flags); -} diff --git a/arch/arm/mach-imx/leds.c b/arch/arm/mach-imx/leds.c deleted file mode 100644 index cf30803..0000000 --- a/arch/arm/mach-imx/leds.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/arch/arm/mach-imx/leds.c - * - * Copyright (C) 2004 Sascha Hauer <sascha@saschahauer.de> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/leds.h> -#include <asm/mach-types.h> - -#include "leds.h" - -static int __init -leds_init(void) -{ - if (machine_is_mx1ads()) { - leds_event = mx1ads_leds_event; - } - - return 0; -} - -__initcall(leds_init); diff --git a/arch/arm/mach-imx/leds.h b/arch/arm/mach-imx/leds.h deleted file mode 100644 index 49dc1c1..0000000 --- a/arch/arm/mach-imx/leds.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-imx/leds.h - * - * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de> - * - * blinky lights for IMX-based systems - * - */ -extern void mx1ads_leds_event(led_event_t evt); diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c deleted file mode 100644 index 87fa1ff..0000000 --- a/arch/arm/mach-imx/mx1ads.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * arch/arm/mach-imx/mx1ads.c - * - * Initially based on: - * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c - * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de> - * - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/device.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <asm/system.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/pgtable.h> -#include <asm/page.h> - -#include <asm/mach/map.h> -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> -#include <mach/mmc.h> -#include <mach/imx-uart.h> -#include <linux/interrupt.h> -#include "generic.h" - -static struct resource cs89x0_resources[] = { - [0] = { - .start = IMX_CS4_PHYS + 0x300, - .end = IMX_CS4_PHYS + 0x300 + 16, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_GPIOC(17), - .end = IRQ_GPIOC(17), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cs89x0_device = { - .name = "cirrus-cs89x0", - .num_resources = ARRAY_SIZE(cs89x0_resources), - .resource = cs89x0_resources, -}; - -static struct imxuart_platform_data uart_pdata = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct resource imx_uart1_resources[] = { - [0] = { - .start = 0x00206000, - .end = 0x002060FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (UART1_MINT_RX), - .end = (UART1_MINT_RX), - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = (UART1_MINT_TX), - .end = (UART1_MINT_TX), - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = UART1_MINT_RTS, - .end = UART1_MINT_RTS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device imx_uart1_device = { - .name = "imx-uart", - .id = 0, - .num_resources = ARRAY_SIZE(imx_uart1_resources), - .resource = imx_uart1_resources, - .dev = { - .platform_data = &uart_pdata, - } -}; - -static struct resource imx_uart2_resources[] = { - [0] = { - .start = 0x00207000, - .end = 0x002070FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (UART2_MINT_RX), - .end = (UART2_MINT_RX), - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = (UART2_MINT_TX), - .end = (UART2_MINT_TX), - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = UART2_MINT_RTS, - .end = UART2_MINT_RTS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device imx_uart2_device = { - .name = "imx-uart", - .id = 1, - .num_resources = ARRAY_SIZE(imx_uart2_resources), - .resource = imx_uart2_resources, - .dev = { - .platform_data = &uart_pdata, - } -}; - -static struct platform_device *devices[] __initdata = { - &cs89x0_device, - &imx_uart1_device, - &imx_uart2_device, -}; - -#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE) -static int mx1ads_mmc_card_present(struct device *dev) -{ - /* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */ - return (SSR(1) & (1 << 20) ? 0 : 1); -} - -static struct imxmmc_platform_data mx1ads_mmc_info = { - .card_present = mx1ads_mmc_card_present, -}; -#endif - -static void __init -mx1ads_init(void) -{ -#ifdef CONFIG_LEDS - imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2); -#endif -#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE) - /* SD/MMC card detect */ - imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20); - imx_set_mmc_info(&mx1ads_mmc_info); -#endif - - imx_gpio_mode(PC9_PF_UART1_CTS); - imx_gpio_mode(PC10_PF_UART1_RTS); - imx_gpio_mode(PC11_PF_UART1_TXD); - imx_gpio_mode(PC12_PF_UART1_RXD); - - imx_gpio_mode(PB28_PF_UART2_CTS); - imx_gpio_mode(PB29_PF_UART2_RTS); - imx_gpio_mode(PB30_PF_UART2_TXD); - imx_gpio_mode(PB31_PF_UART2_RXD); - - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init -mx1ads_map_io(void) -{ - imx_map_io(); -} - -MACHINE_START(MX1ADS, "Motorola MX1ADS") - /* Maintainer: Sascha Hauer, Pengutronix */ - .phys_io = 0x00200000, - .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, - .boot_params = 0x08000100, - .map_io = mx1ads_map_io, - .init_irq = imx_init_irq, - .timer = &imx_timer, - .init_machine = mx1ads_init, -MACHINE_END diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c deleted file mode 100644 index 5aef18b..0000000 --- a/arch/arm/mach-imx/time.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * linux/arch/arm/mach-imx/time.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/time.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/leds.h> -#include <asm/irq.h> -#include <asm/mach/time.h> - -/* Use timer 1 as system timer */ -#define TIMER_BASE IMX_TIM1_BASE - -static struct clock_event_device clockevent_imx; -static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; - -/* - * IRQ handler for the timer - */ -static irqreturn_t -imx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &clockevent_imx; - uint32_t tstat; - irqreturn_t ret = IRQ_NONE; - - /* clear the interrupt */ - tstat = IMX_TSTAT(TIMER_BASE); - IMX_TSTAT(TIMER_BASE) = 0; - - if (tstat & TSTAT_COMP) { - evt->event_handler(evt); - ret = IRQ_HANDLED; - } - - return ret; -} - -static struct irqaction imx_timer_irq = { - .name = "i.MX Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = imx_timer_interrupt, -}; - -/* - * Set up timer hardware into expected mode and state. - */ -static void __init imx_timer_hardware_init(void) -{ - /* - * Initialise to a known state (all timers off, and timing reset) - */ - IMX_TCTL(TIMER_BASE) = 0; - IMX_TPRER(TIMER_BASE) = 0; - - IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN; -} - -cycle_t imx_get_cycles(struct clocksource *cs) -{ - return IMX_TCN(TIMER_BASE); -} - -static struct clocksource clocksource_imx = { - .name = "imx_timer1", - .rating = 200, - .read = imx_get_cycles, - .mask = 0xFFFFFFFF, - .shift = 20, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int __init imx_clocksource_init(unsigned long rate) -{ - clocksource_imx.mult = - clocksource_hz2mult(rate, clocksource_imx.shift); - clocksource_register(&clocksource_imx); - - return 0; -} - -static int imx_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long tcmp; - - tcmp = IMX_TCN(TIMER_BASE) + evt; - IMX_TCMP(TIMER_BASE) = tcmp; - - return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0; -} - -#ifdef DEBUG -static const char *clock_event_mode_label[]={ - [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", - [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", - [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", - [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" -}; -#endif /*DEBUG*/ - -static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) -{ - unsigned long flags; - - /* - * The timer interrupt generation is disabled at least - * for enough time to call imx_set_next_event() - */ - local_irq_save(flags); - /* Disable interrupt in GPT module */ - IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN; - if (mode != clockevent_mode) { - /* Set event time into far-far future */ - IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3; - /* Clear pending interrupt */ - IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP; - } - -#ifdef DEBUG - printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n", - clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]); -#endif /*DEBUG*/ - - /* Remember timer mode */ - clockevent_mode = mode; - local_irq_restore(flags); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n"); - break; - case CLOCK_EVT_MODE_ONESHOT: - /* - * Do not put overhead of interrupt enable/disable into - * imx_set_next_event(), the core has about 4 minutes - * to call imx_set_next_event() or shutdown clock after - * mode switching - */ - local_irq_save(flags); - IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN; - local_irq_restore(flags); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - /* Left event sources disabled, no more interrupts appears */ - break; - } -} - -static struct clock_event_device clockevent_imx = { - .name = "imx_timer1", - .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, - .set_mode = imx_set_mode, - .set_next_event = imx_set_next_event, - .rating = 200, -}; - -static int __init imx_clockevent_init(unsigned long rate) -{ - clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC, - clockevent_imx.shift); - clockevent_imx.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &clockevent_imx); - clockevent_imx.min_delta_ns = - clockevent_delta2ns(0xf, &clockevent_imx); - - clockevent_imx.cpumask = cpumask_of(0); - - clockevents_register_device(&clockevent_imx); - - return 0; -} - -extern int imx_clocks_init(void); - -static void __init imx_timer_init(void) -{ - struct clk *clk; - unsigned long rate; - - imx_clocks_init(); - - clk = clk_get(NULL, "perclk1"); - clk_enable(clk); - rate = clk_get_rate(clk); - - imx_timer_hardware_init(); - imx_clocksource_init(rate); - - imx_clockevent_init(rate); - - /* - * Make irqs happen for the system timer - */ - setup_irq(TIM1_INT, &imx_timer_irq); -} - -struct sys_timer imx_timer = { - .init = imx_timer_init, -}; diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 6f88729..a0f60e5 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -121,7 +121,7 @@ static struct clk uartclk = { .rate = 14745600, }; -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { { /* UART0 */ .dev_id = "mb:16", .clk = &uartclk, diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 2c5a02b..264f4d5 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -78,6 +78,12 @@ config MACH_IXDP465 IXDP465 Development Platform (Also known as BMP). For more information on this platform, see <file:Documentation/arm/IXP4xx>. +config MACH_GORAMO_MLR + bool "GORAMO Multi Link Router" + help + Say 'Y' here if you want your kernel to support GORAMO + MultiLink router. + config MACH_KIXRP435 bool "KIXRP435" help diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index 2e6bbf9..47d1f60 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o obj-$(CONFIG_MACH_FSG) += fsg-setup.o +obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c new file mode 100644 index 0000000..a733b8f --- /dev/null +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -0,0 +1,507 @@ +/* + * Goramo MultiLink router platform code + * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl> + */ + +#include <linux/delay.h> +#include <linux/hdlc.h> +#include <linux/i2c-gpio.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/serial_8250.h> +#include <asm/mach-types.h> +#include <asm/system.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/pci.h> + +#define xgpio_irq(n) (IRQ_IXP4XX_GPIO ## n) +#define gpio_irq(n) xgpio_irq(n) + +#define SLOT_ETHA 0x0B /* IDSEL = AD21 */ +#define SLOT_ETHB 0x0C /* IDSEL = AD20 */ +#define SLOT_MPCI 0x0D /* IDSEL = AD19 */ +#define SLOT_NEC 0x0E /* IDSEL = AD18 */ + +#define IRQ_ETHA IRQ_IXP4XX_GPIO4 +#define IRQ_ETHB IRQ_IXP4XX_GPIO5 +#define IRQ_NEC IRQ_IXP4XX_GPIO3 +#define IRQ_MPCI IRQ_IXP4XX_GPIO12 + +/* GPIO lines */ +#define GPIO_SCL 0 +#define GPIO_SDA 1 +#define GPIO_STR 2 +#define GPIO_HSS0_DCD_N 6 +#define GPIO_HSS1_DCD_N 7 +#define GPIO_HSS0_CTS_N 10 +#define GPIO_HSS1_CTS_N 11 +#define GPIO_HSS1_RTS_N 13 +#define GPIO_HSS0_RTS_N 14 + +/* Control outputs from 74HC4094 */ +#define CONTROL_HSS0_CLK_INT 0 +#define CONTROL_HSS1_CLK_INT 1 +#define CONTROL_HSS0_DTR_N 2 +#define CONTROL_HSS1_DTR_N 3 +#define CONTROL_EXT 4 +#define CONTROL_AUTO_RESET 5 +#define CONTROL_PCI_RESET_N 6 +#define CONTROL_EEPROM_WC_N 7 + +/* offsets from start of flash ROM = 0x50000000 */ +#define CFG_ETH0_ADDRESS 0x40 /* 6 bytes */ +#define CFG_ETH1_ADDRESS 0x46 /* 6 bytes */ +#define CFG_REV 0x4C /* u32 */ +#define CFG_SDRAM_SIZE 0x50 /* u32 */ +#define CFG_SDRAM_CONF 0x54 /* u32 */ +#define CFG_SDRAM_MODE 0x58 /* u32 */ +#define CFG_SDRAM_REFRESH 0x5C /* u32 */ + +#define CFG_HW_BITS 0x60 /* u32 */ +#define CFG_HW_USB_PORTS 0x00000007 /* 0 = no NEC chip, 1-5 = ports # */ +#define CFG_HW_HAS_PCI_SLOT 0x00000008 +#define CFG_HW_HAS_ETH0 0x00000010 +#define CFG_HW_HAS_ETH1 0x00000020 +#define CFG_HW_HAS_HSS0 0x00000040 +#define CFG_HW_HAS_HSS1 0x00000080 +#define CFG_HW_HAS_UART0 0x00000100 +#define CFG_HW_HAS_UART1 0x00000200 +#define CFG_HW_HAS_EEPROM 0x00000400 + +#define FLASH_CMD_READ_ARRAY 0xFF +#define FLASH_CMD_READ_ID 0x90 +#define FLASH_SER_OFF 0x102 /* 0x81 in 16-bit mode */ + +static u32 hw_bits = 0xFFFFFFFD; /* assume all hardware present */; +static u8 control_value; + +static void set_scl(u8 value) +{ + gpio_line_set(GPIO_SCL, !!value); + udelay(3); +} + +static void set_sda(u8 value) +{ + gpio_line_set(GPIO_SDA, !!value); + udelay(3); +} + +static void set_str(u8 value) +{ + gpio_line_set(GPIO_STR, !!value); + udelay(3); +} + +static inline void set_control(int line, int value) +{ + if (value) + control_value |= (1 << line); + else + control_value &= ~(1 << line); +} + + +static void output_control(void) +{ + int i; + + gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT); + + for (i = 0; i < 8; i++) { + set_scl(0); + set_sda(control_value & (0x80 >> i)); /* MSB first */ + set_scl(1); /* active edge */ + } + + set_str(1); + set_str(0); + + set_scl(0); + set_sda(1); /* Be ready for START */ + set_scl(1); +} + + +static void (*set_carrier_cb_tab[2])(void *pdev, int carrier); + +static int hss_set_clock(int port, unsigned int clock_type) +{ + int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT; + + switch (clock_type) { + case CLOCK_DEFAULT: + case CLOCK_EXT: + set_control(ctrl_int, 0); + output_control(); + return CLOCK_EXT; + + case CLOCK_INT: + set_control(ctrl_int, 1); + output_control(); + return CLOCK_INT; + + default: + return -EINVAL; + } +} + +static irqreturn_t hss_dcd_irq(int irq, void *pdev) +{ + int i, port = (irq == gpio_irq(GPIO_HSS1_DCD_N)); + gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i); + set_carrier_cb_tab[port](pdev, !i); + return IRQ_HANDLED; +} + + +static int hss_open(int port, void *pdev, + void (*set_carrier_cb)(void *pdev, int carrier)) +{ + int i, irq; + + if (!port) + irq = gpio_irq(GPIO_HSS0_DCD_N); + else + irq = gpio_irq(GPIO_HSS1_DCD_N); + + gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i); + set_carrier_cb(pdev, !i); + + set_carrier_cb_tab[!!port] = set_carrier_cb; + + if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) { + printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n", + irq, i); + return i; + } + + set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0); + output_control(); + gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0); + return 0; +} + +static void hss_close(int port, void *pdev) +{ + free_irq(port ? gpio_irq(GPIO_HSS1_DCD_N) : gpio_irq(GPIO_HSS0_DCD_N), + pdev); + set_carrier_cb_tab[!!port] = NULL; /* catch bugs */ + + set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1); + output_control(); + gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1); +} + + +/* Flash memory */ +static struct flash_platform_data flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device device_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { .platform_data = &flash_data }, + .num_resources = 1, + .resource = &flash_resource, +}; + + +/* I^2C interface */ +static struct i2c_gpio_platform_data i2c_data = { + .sda_pin = GPIO_SDA, + .scl_pin = GPIO_SCL, +}; + +static struct platform_device device_i2c = { + .name = "i2c-gpio", + .id = 0, + .dev = { .platform_data = &i2c_data }, +}; + + +/* IXP425 2 UART ports */ +static struct resource uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char __iomem *)IXP4XX_UART1_BASE_VIRT + + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char __iomem *)IXP4XX_UART2_BASE_VIRT + + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device device_uarts = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = uart_data, + .num_resources = 2, + .resource = uart_resources, +}; + + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info eth_plat[] = { + { + .phy = 0, + .rxq = 3, + .txreadyq = 32, + }, { + .phy = 1, + .rxq = 4, + .txreadyq = 33, + } +}; + +static struct platform_device device_eth_tab[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = eth_plat, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev.platform_data = eth_plat + 1, + } +}; + + +/* IXP425 2 synchronous serial ports */ +static struct hss_plat_info hss_plat[] = { + { + .set_clock = hss_set_clock, + .open = hss_open, + .close = hss_close, + .txreadyq = 34, + }, { + .set_clock = hss_set_clock, + .open = hss_open, + .close = hss_close, + .txreadyq = 35, + } +}; + +static struct platform_device device_hss_tab[] = { + { + .name = "ixp4xx_hss", + .id = 0, + .dev.platform_data = hss_plat, + }, { + .name = "ixp4xx_hss", + .id = 1, + .dev.platform_data = hss_plat + 1, + } +}; + + +static struct platform_device *device_tab[6] __initdata = { + &device_flash, /* index 0 */ +}; + +static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr) +{ +#ifdef __ARMEB__ + return __raw_readb(flash + addr); +#else + return __raw_readb(flash + (addr ^ 3)); +#endif +} + +static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr) +{ +#ifdef __ARMEB__ + return __raw_readw(flash + addr); +#else + return __raw_readw(flash + (addr ^ 2)); +#endif +} + +static void __init gmlr_init(void) +{ + u8 __iomem *flash; + int i, devices = 1; /* flash */ + + ixp4xx_sys_init(); + + if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL) + printk(KERN_ERR "goramo-mlr: unable to access system" + " configuration data\n"); + else { + system_rev = __raw_readl(flash + CFG_REV); + hw_bits = __raw_readl(flash + CFG_HW_BITS); + + for (i = 0; i < ETH_ALEN; i++) { + eth_plat[0].hwaddr[i] = + flash_readb(flash, CFG_ETH0_ADDRESS + i); + eth_plat[1].hwaddr[i] = + flash_readb(flash, CFG_ETH1_ADDRESS + i); + } + + __raw_writew(FLASH_CMD_READ_ID, flash); + system_serial_high = flash_readw(flash, FLASH_SER_OFF); + system_serial_high <<= 16; + system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2); + system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4); + system_serial_low <<= 16; + system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6); + __raw_writew(FLASH_CMD_READ_ARRAY, flash); + + iounmap(flash); + } + + switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) { + case CFG_HW_HAS_UART0: + memset(&uart_data[1], 0, sizeof(uart_data[1])); + device_uarts.num_resources = 1; + break; + + case CFG_HW_HAS_UART1: + device_uarts.dev.platform_data = &uart_data[1]; + device_uarts.resource = &uart_resources[1]; + device_uarts.num_resources = 1; + break; + } + if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) + device_tab[devices++] = &device_uarts; /* max index 1 */ + + if (hw_bits & CFG_HW_HAS_ETH0) + device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */ + if (hw_bits & CFG_HW_HAS_ETH1) + device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */ + + if (hw_bits & CFG_HW_HAS_HSS0) + device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */ + if (hw_bits & CFG_HW_HAS_HSS1) + device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */ + + if (hw_bits & CFG_HW_HAS_EEPROM) + device_tab[devices++] = &device_i2c; /* max index 6 */ + + gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN); + gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN); + set_irq_type(gpio_irq(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH); + set_irq_type(gpio_irq(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH); + + set_control(CONTROL_HSS0_DTR_N, 1); + set_control(CONTROL_HSS1_DTR_N, 1); + set_control(CONTROL_EEPROM_WC_N, 1); + set_control(CONTROL_PCI_RESET_N, 1); + output_control(); + + msleep(1); /* Wait for PCI devices to initialize */ + + flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + + platform_add_devices(device_tab, devices); +} + + +#ifdef CONFIG_PCI +static void __init gmlr_pci_preinit(void) +{ + set_irq_type(IRQ_ETHA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_ETHB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NEC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_MPCI, IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static void __init gmlr_pci_postinit(void) +{ + if ((hw_bits & CFG_HW_USB_PORTS) >= 2 && + (hw_bits & CFG_HW_USB_PORTS) < 5) { + /* need to adjust number of USB ports on NEC chip */ + u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0; + if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) { + value &= ~7; + value |= (hw_bits & CFG_HW_USB_PORTS); + ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value); + } + } +} + +static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + switch(slot) { + case SLOT_ETHA: return IRQ_ETHA; + case SLOT_ETHB: return IRQ_ETHB; + case SLOT_NEC: return IRQ_NEC; + default: return IRQ_MPCI; + } +} + +static struct hw_pci gmlr_hw_pci __initdata = { + .nr_controllers = 1, + .preinit = gmlr_pci_preinit, + .postinit = gmlr_pci_postinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = gmlr_map_irq, +}; + +static int __init gmlr_pci_init(void) +{ + if (machine_is_goramo_mlr() && + (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT))) + pci_common_init(&gmlr_hw_pci); + return 0; +} + +subsys_initcall(gmlr_pci_init); +#endif /* CONFIG_PCI */ + + +MACHINE_START(GORAMO_MLR, "MultiLink") + /* Maintainer: Krzysztof Halasa */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = gmlr_init, +MACHINE_END diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h index def7773..b2ef65d 100644 --- a/arch/arm/mach-ixp4xx/include/mach/cpu.h +++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h @@ -26,6 +26,8 @@ #define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */ #define IXP46X_PROCESSOR_ID_MASK 0xfffffff0 +#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \ + IXP42X_PROCESSOR_ID_VALUE) #define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \ IXP42X_PROCESSOR_ID_VALUE) #define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \ @@ -35,8 +37,11 @@ static inline u32 ixp4xx_read_feature_bits(void) { - unsigned int val = ~*IXP4XX_EXP_CFG2; + u32 val = ~*IXP4XX_EXP_CFG2; + if (cpu_is_ixp42x_rev_a0()) + return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP | + IXP4XX_FEATURE_AES); if (cpu_is_ixp42x()) return val & IXP42X_FEATURE_MASK; if (cpu_is_ixp43x()) diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h index 0cbe6ce..9e7cad2 100644 --- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h +++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h @@ -15,7 +15,7 @@ #define DEBUG_QMGR 0 #define HALF_QUEUES 32 -#define QUEUES 64 /* only 32 lower queues currently supported */ +#define QUEUES 64 #define MAX_QUEUE_LENGTH 4 /* in dwords */ #define QUEUE_STAT1_EMPTY 1 /* queue status bits */ @@ -110,48 +110,95 @@ static inline u32 qmgr_get_entry(unsigned int queue) return val; } -static inline int qmgr_get_stat1(unsigned int queue) +static inline int __qmgr_get_stat1(unsigned int queue) { extern struct qmgr_regs __iomem *qmgr_regs; return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) >> ((queue & 7) << 2)) & 0xF; } -static inline int qmgr_get_stat2(unsigned int queue) +static inline int __qmgr_get_stat2(unsigned int queue) { extern struct qmgr_regs __iomem *qmgr_regs; + BUG_ON(queue >= HALF_QUEUES); return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) >> ((queue & 0xF) << 1)) & 0x3; } +/** + * qmgr_stat_empty() - checks if a hardware queue is empty + * @queue: queue number + * + * Returns non-zero value if the queue is empty. + */ static inline int qmgr_stat_empty(unsigned int queue) { - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY); + BUG_ON(queue >= HALF_QUEUES); + return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY; } -static inline int qmgr_stat_nearly_empty(unsigned int queue) +/** + * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark + * @queue: queue number + * + * Returns non-zero value if the queue is below low watermark. + */ +static inline int qmgr_stat_below_low_watermark(unsigned int queue) { - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY); + extern struct qmgr_regs __iomem *qmgr_regs; + if (queue >= HALF_QUEUES) + return (__raw_readl(&qmgr_regs->statne_h) >> + (queue - HALF_QUEUES)) & 0x01; + return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY; } -static inline int qmgr_stat_nearly_full(unsigned int queue) +/** + * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark + * @queue: queue number + * + * Returns non-zero value if the queue is above high watermark + */ +static inline int qmgr_stat_above_high_watermark(unsigned int queue) { - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL); + BUG_ON(queue >= HALF_QUEUES); + return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL; } +/** + * qmgr_stat_full() - checks if a hardware queue is full + * @queue: queue number + * + * Returns non-zero value if the queue is full. + */ static inline int qmgr_stat_full(unsigned int queue) { - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL); + extern struct qmgr_regs __iomem *qmgr_regs; + if (queue >= HALF_QUEUES) + return (__raw_readl(&qmgr_regs->statf_h) >> + (queue - HALF_QUEUES)) & 0x01; + return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL; } +/** + * qmgr_stat_underflow() - checks if a hardware queue experienced underflow + * @queue: queue number + * + * Returns non-zero value if the queue experienced underflow. + */ static inline int qmgr_stat_underflow(unsigned int queue) { - return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW); + return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW; } +/** + * qmgr_stat_overflow() - checks if a hardware queue experienced overflow + * @queue: queue number + * + * Returns non-zero value if the queue experienced overflow. + */ static inline int qmgr_stat_overflow(unsigned int queue) { - return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW); + return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW; } #endif diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index 2523102..47ac69c 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -386,15 +386,6 @@ static int npe_reset(struct npe *npe) /* reset the NPE */ ixp4xx_write_feature_bits(val & ~(IXP4XX_FEATURE_RESET_NPEA << npe->id)); - for (i = 0; i < MAX_RETRIES; i++) { - if (!(ixp4xx_read_feature_bits() & - (IXP4XX_FEATURE_RESET_NPEA << npe->id))) - break; /* reset completed */ - udelay(1); - } - if (i == MAX_RETRIES) - return -ETIMEDOUT; - /* deassert reset */ ixp4xx_write_feature_bits(val | (IXP4XX_FEATURE_RESET_NPEA << npe->id)); @@ -714,7 +705,7 @@ static int __init npe_init_module(void) } if (!found) - return -ENOSYS; + return -ENODEV; return 0; } diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index bfddc73..bfdbe4b 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -18,8 +18,8 @@ struct qmgr_regs __iomem *qmgr_regs; static struct resource *mem_res; static spinlock_t qmgr_lock; static u32 used_sram_bitmap[4]; /* 128 16-dword pages */ -static void (*irq_handlers[HALF_QUEUES])(void *pdev); -static void *irq_pdevs[HALF_QUEUES]; +static void (*irq_handlers[QUEUES])(void *pdev); +static void *irq_pdevs[QUEUES]; #if DEBUG_QMGR char qmgr_queue_descs[QUEUES][32]; @@ -28,51 +28,112 @@ char qmgr_queue_descs[QUEUES][32]; void qmgr_set_irq(unsigned int queue, int src, void (*handler)(void *pdev), void *pdev) { - u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */ - int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */ unsigned long flags; - src &= 7; spin_lock_irqsave(&qmgr_lock, flags); - __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg); + if (queue < HALF_QUEUES) { + u32 __iomem *reg; + int bit; + BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL); + reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */ + bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */ + __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), + reg); + } else + /* IRQ source for queues 32-63 is fixed */ + BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY); + irq_handlers[queue] = handler; irq_pdevs[queue] = pdev; spin_unlock_irqrestore(&qmgr_lock, flags); } -static irqreturn_t qmgr_irq1(int irq, void *pdev) +static irqreturn_t qmgr_irq1_a0(int irq, void *pdev) { - int i; - u32 val = __raw_readl(&qmgr_regs->irqstat[0]); - __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */ - - for (i = 0; i < HALF_QUEUES; i++) - if (val & (1 << i)) + int i, ret = 0; + u32 en_bitmap, src, stat; + + /* ACK - it may clear any bits so don't rely on it */ + __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]); + + en_bitmap = qmgr_regs->irqen[0]; + while (en_bitmap) { + i = __fls(en_bitmap); /* number of the last "low" queue */ + en_bitmap &= ~BIT(i); + src = qmgr_regs->irqsrc[i >> 3]; + stat = qmgr_regs->stat1[i >> 3]; + if (src & 4) /* the IRQ condition is inverted */ + stat = ~stat; + if (stat & BIT(src & 3)) { irq_handlers[i](irq_pdevs[i]); + ret = IRQ_HANDLED; + } + } + return ret; +} + + +static irqreturn_t qmgr_irq2_a0(int irq, void *pdev) +{ + int i, ret = 0; + u32 req_bitmap; + + /* ACK - it may clear any bits so don't rely on it */ + __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]); + + req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h; + while (req_bitmap) { + i = __fls(req_bitmap); /* number of the last "high" queue */ + req_bitmap &= ~BIT(i); + irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]); + ret = IRQ_HANDLED; + } + return ret; +} - return val ? IRQ_HANDLED : 0; + +static irqreturn_t qmgr_irq(int irq, void *pdev) +{ + int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1); + u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]); + + if (!req_bitmap) + return 0; + __raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */ + + while (req_bitmap) { + i = __fls(req_bitmap); /* number of the last queue */ + req_bitmap &= ~BIT(i); + i += half * HALF_QUEUES; + irq_handlers[i](irq_pdevs[i]); + } + return IRQ_HANDLED; } void qmgr_enable_irq(unsigned int queue) { unsigned long flags; + int half = queue / 32; + u32 mask = 1 << (queue & (HALF_QUEUES - 1)); spin_lock_irqsave(&qmgr_lock, flags); - __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue), - &qmgr_regs->irqen[0]); + __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask, + &qmgr_regs->irqen[half]); spin_unlock_irqrestore(&qmgr_lock, flags); } void qmgr_disable_irq(unsigned int queue) { unsigned long flags; + int half = queue / 32; + u32 mask = 1 << (queue & (HALF_QUEUES - 1)); spin_lock_irqsave(&qmgr_lock, flags); - __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue), - &qmgr_regs->irqen[0]); - __raw_writel(1 << queue, &qmgr_regs->irqstat[0]); /* clear */ + __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask, + &qmgr_regs->irqen[half]); + __raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */ spin_unlock_irqrestore(&qmgr_lock, flags); } @@ -98,8 +159,7 @@ int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, u32 cfg, addr = 0, mask[4]; /* in 16-dwords */ int err; - if (queue >= HALF_QUEUES) - return -ERANGE; + BUG_ON(queue >= QUEUES); if ((nearly_empty_watermark | nearly_full_watermark) & ~7) return -EINVAL; @@ -180,7 +240,7 @@ void qmgr_release_queue(unsigned int queue) { u32 cfg, addr, mask[4]; - BUG_ON(queue >= HALF_QUEUES); /* not in valid range */ + BUG_ON(queue >= QUEUES); /* not in valid range */ spin_lock_irq(&qmgr_lock); cfg = __raw_readl(&qmgr_regs->sram[queue]); @@ -224,6 +284,8 @@ void qmgr_release_queue(unsigned int queue) static int qmgr_init(void) { int i, err; + irq_handler_t handler1, handler2; + mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE, "IXP4xx Queue Manager"); @@ -247,23 +309,42 @@ static int qmgr_init(void) __raw_writel(0, &qmgr_regs->irqen[i]); } + __raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h); + __raw_writel(0, &qmgr_regs->statf_h); + for (i = 0; i < QUEUES; i++) __raw_writel(0, &qmgr_regs->sram[i]); - err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0, - "IXP4xx Queue Manager", NULL); + if (cpu_is_ixp42x_rev_a0()) { + handler1 = qmgr_irq1_a0; + handler2 = qmgr_irq2_a0; + } else + handler1 = handler2 = qmgr_irq; + + err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager", + NULL); if (err) { - printk(KERN_ERR "qmgr: failed to request IRQ%i\n", - IRQ_IXP4XX_QM1); + printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n", + IRQ_IXP4XX_QM1, err); goto error_irq; } + err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager", + NULL); + if (err) { + printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n", + IRQ_IXP4XX_QM2, err); + goto error_irq2; + } + used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */ spin_lock_init(&qmgr_lock); printk(KERN_INFO "IXP4xx Queue Manager initialized.\n"); return 0; +error_irq2: + free_irq(IRQ_IXP4XX_QM1, NULL); error_irq: iounmap(qmgr_regs); error_map: @@ -274,7 +355,9 @@ error_map: static void qmgr_remove(void) { free_irq(IRQ_IXP4XX_QM1, NULL); + free_irq(IRQ_IXP4XX_QM2, NULL); synchronize_irq(IRQ_IXP4XX_QM1); + synchronize_irq(IRQ_IXP4XX_QM2); iounmap(qmgr_regs); release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); } diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index b5421cc..25100f7 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -20,6 +20,12 @@ config MACH_RD88F6281 Say 'Y' here if you want your kernel to support the Marvell RD-88F6281 Reference Board. +config MACH_MV88F6281GTW_GE + bool "Marvell 88F6281 GTW GE Board" + help + Say 'Y' here if you want your kernel to support the + Marvell 88F6281 GTW GE Board. + config MACH_SHEEVAPLUG bool "Marvell SheevaPlug Reference Board" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 8f03c9b..9dd680e 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -3,5 +3,8 @@ obj-y += common.o addr-map.o irq.o pcie.o mpp.o obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o +obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o + +obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index 5db4f0b..1da5d1c 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -20,6 +20,7 @@ */ #define TARGET_DDR 0 #define TARGET_DEV_BUS 1 +#define TARGET_SRAM 3 #define TARGET_PCIE 4 #define ATTR_DEV_SPI_ROM 0x1e #define ATTR_DEV_BOOT 0x1d @@ -30,6 +31,7 @@ #define ATTR_DEV_CS0 0x3e #define ATTR_PCIE_IO 0xe0 #define ATTR_PCIE_MEM 0xe8 +#define ATTR_SRAM 0x01 /* * Helpers to get DDR bank info @@ -48,7 +50,6 @@ struct mbus_dram_target_info kirkwood_mbus_dram_info; -static int __initdata win_alloc_count; static int __init cpu_win_can_remap(int win) { @@ -112,7 +113,11 @@ void __init kirkwood_setup_cpu_mbus(void) setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE, TARGET_DEV_BUS, ATTR_DEV_NAND, -1); - win_alloc_count = 3; + /* + * Setup window for SRAM. + */ + setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE, + TARGET_SRAM, ATTR_SRAM, -1); /* * Setup MBUS dram target info. @@ -140,8 +145,3 @@ void __init kirkwood_setup_cpu_mbus(void) } kirkwood_mbus_dram_info.num_cs = cs; } - -void __init kirkwood_setup_sram_win(u32 base, u32 size) -{ - setup_cpu_win(win_alloc_count++, base, size, 0x03, 0x00, -1); -} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index eeb0024..0f69198 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -16,6 +16,7 @@ #include <linux/mv643xx_eth.h> #include <linux/mv643xx_i2c.h> #include <linux/ata_platform.h> +#include <linux/mtd/nand.h> #include <linux/spi/orion_spi.h> #include <net/dsa.h> #include <asm/page.h> @@ -29,6 +30,7 @@ #include <plat/mvsdio.h> #include <plat/mv_xor.h> #include <plat/orion_nand.h> +#include <plat/orion_wdt.h> #include <plat/time.h> #include "common.h" @@ -54,6 +56,13 @@ void __init kirkwood_map_io(void) iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); } +/* + * Default clock control bits. Any bit _not_ set in this variable + * will be cleared from the hardware after platform devices have been + * registered. Some reserved bits must be set to 1. + */ +unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED; + /***************************************************************************** * EHCI @@ -95,6 +104,7 @@ static struct platform_device kirkwood_ehci = { void __init kirkwood_ehci_init(void) { + kirkwood_clk_ctrl |= CGC_USB0; platform_device_register(&kirkwood_ehci); } @@ -144,10 +154,14 @@ static struct platform_device kirkwood_ge00 = { .id = 0, .num_resources = 1, .resource = kirkwood_ge00_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { + kirkwood_clk_ctrl |= CGC_GE0; eth_data->shared = &kirkwood_ge00_shared; kirkwood_ge00.dev.platform_data = eth_data; @@ -202,10 +216,14 @@ static struct platform_device kirkwood_ge01 = { .id = 1, .num_resources = 1, .resource = kirkwood_ge01_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { + kirkwood_clk_ctrl |= CGC_GE1; eth_data->shared = &kirkwood_ge01_shared; kirkwood_ge01.dev.platform_data = eth_data; @@ -252,6 +270,43 @@ void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq) /***************************************************************************** + * NAND flash + ****************************************************************************/ +static struct resource kirkwood_nand_resource = { + .flags = IORESOURCE_MEM, + .start = KIRKWOOD_NAND_MEM_PHYS_BASE, + .end = KIRKWOOD_NAND_MEM_PHYS_BASE + + KIRKWOOD_NAND_MEM_SIZE - 1, +}; + +static struct orion_nand_data kirkwood_nand_data = { + .cle = 0, + .ale = 1, + .width = 8, +}; + +static struct platform_device kirkwood_nand_flash = { + .name = "orion_nand", + .id = -1, + .dev = { + .platform_data = &kirkwood_nand_data, + }, + .resource = &kirkwood_nand_resource, + .num_resources = 1, +}; + +void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, + int chip_delay) +{ + kirkwood_clk_ctrl |= CGC_RUNIT; + kirkwood_nand_data.parts = parts; + kirkwood_nand_data.nr_parts = nr_parts; + kirkwood_nand_data.chip_delay = chip_delay; + platform_device_register(&kirkwood_nand_flash); +} + + +/***************************************************************************** * SoC RTC ****************************************************************************/ static struct resource kirkwood_rtc_resource = { @@ -295,6 +350,9 @@ static struct platform_device kirkwood_sata = { void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data) { + kirkwood_clk_ctrl |= CGC_SATA0; + if (sata_data->n_ports > 1) + kirkwood_clk_ctrl |= CGC_SATA1; sata_data->dram = &kirkwood_mbus_dram_info; kirkwood_sata.dev.platform_data = sata_data; platform_device_register(&kirkwood_sata); @@ -340,6 +398,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) else mvsdio_data->clock = 200000000; mvsdio_data->dram = &kirkwood_mbus_dram_info; + kirkwood_clk_ctrl |= CGC_SDIO; kirkwood_sdio.dev.platform_data = mvsdio_data; platform_device_register(&kirkwood_sdio); } @@ -371,6 +430,7 @@ static struct platform_device kirkwood_spi = { void __init kirkwood_spi_init() { + kirkwood_clk_ctrl |= CGC_RUNIT; platform_device_register(&kirkwood_spi); } @@ -386,12 +446,10 @@ static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = { static struct resource kirkwood_i2c_resources[] = { { - .name = "i2c", .start = I2C_PHYS_BASE, .end = I2C_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c", .start = IRQ_KIRKWOOD_TWSI, .end = IRQ_KIRKWOOD_TWSI, .flags = IORESOURCE_IRQ, @@ -503,6 +561,43 @@ void __init kirkwood_uart1_init(void) /***************************************************************************** + * Cryptographic Engines and Security Accelerator (CESA) + ****************************************************************************/ + +static struct resource kirkwood_crypto_res[] = { + { + .name = "regs", + .start = CRYPTO_PHYS_BASE, + .end = CRYPTO_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, + }, { + .name = "sram", + .start = KIRKWOOD_SRAM_PHYS_BASE, + .end = KIRKWOOD_SRAM_PHYS_BASE + KIRKWOOD_SRAM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "crypto interrupt", + .start = IRQ_KIRKWOOD_CRYPTO, + .end = IRQ_KIRKWOOD_CRYPTO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device kirkwood_crypto_device = { + .name = "mv_crypto", + .id = -1, + .num_resources = ARRAY_SIZE(kirkwood_crypto_res), + .resource = kirkwood_crypto_res, +}; + +void __init kirkwood_crypto_init(void) +{ + kirkwood_clk_ctrl |= CGC_CRYPTO; + platform_device_register(&kirkwood_crypto_device); +} + + +/***************************************************************************** * XOR ****************************************************************************/ static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = { @@ -593,6 +688,7 @@ static struct platform_device kirkwood_xor01_channel = { static void __init kirkwood_xor0_init(void) { + kirkwood_clk_ctrl |= CGC_XOR0; platform_device_register(&kirkwood_xor0_shared); /* @@ -691,6 +787,7 @@ static struct platform_device kirkwood_xor11_channel = { static void __init kirkwood_xor1_init(void) { + kirkwood_clk_ctrl |= CGC_XOR1; platform_device_register(&kirkwood_xor1_shared); /* @@ -709,6 +806,29 @@ static void __init kirkwood_xor1_init(void) /***************************************************************************** + * Watchdog + ****************************************************************************/ +static struct orion_wdt_platform_data kirkwood_wdt_data = { + .tclk = 0, +}; + +static struct platform_device kirkwood_wdt_device = { + .name = "orion_wdt", + .id = -1, + .dev = { + .platform_data = &kirkwood_wdt_data, + }, + .num_resources = 0, +}; + +static void __init kirkwood_wdt_init(void) +{ + kirkwood_wdt_data.tclk = kirkwood_tclk; + platform_device_register(&kirkwood_wdt_device); +} + + +/***************************************************************************** * Time handling ****************************************************************************/ int kirkwood_tclk; @@ -800,6 +920,49 @@ void __init kirkwood_init(void) /* internal devices that every board has */ kirkwood_rtc_init(); + kirkwood_wdt_init(); kirkwood_xor0_init(); kirkwood_xor1_init(); + kirkwood_crypto_init(); +} + +static int __init kirkwood_clock_gate(void) +{ + unsigned int curr = readl(CLOCK_GATING_CTRL); + + printk(KERN_DEBUG "Gating clock of unused units\n"); + printk(KERN_DEBUG "before: 0x%08x\n", curr); + + /* Make sure those units are accessible */ + writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL); + + /* For SATA: first shutdown the phy */ + if (!(kirkwood_clk_ctrl & CGC_SATA0)) { + /* Disable PLL and IVREF */ + writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2); + /* Disable PHY */ + writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL); + } + if (!(kirkwood_clk_ctrl & CGC_SATA1)) { + /* Disable PLL and IVREF */ + writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2); + /* Disable PHY */ + writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL); + } + + /* For PCIe: first shutdown the phy */ + if (!(kirkwood_clk_ctrl & CGC_PEX0)) { + writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL); + while (1) + if (readl(PCIE_STATUS) & 0x1) + break; + writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL); + } + + /* Now gate clock the required units */ + writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL); + printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL)); + + return 0; } +late_initcall(kirkwood_clock_gate); diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 6ee8840..d7de434 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -15,6 +15,7 @@ struct dsa_platform_data; struct mv643xx_eth_platform_data; struct mv_sata_platform_data; struct mvsdio_platform_data; +struct mtd_partition; /* * Basic Kirkwood init functions used early by machine-setup. @@ -25,7 +26,6 @@ void kirkwood_init_irq(void); extern struct mbus_dram_target_info kirkwood_mbus_dram_info; void kirkwood_setup_cpu_mbus(void); -void kirkwood_setup_sram_win(u32 base, u32 size); void kirkwood_pcie_id(u32 *dev, u32 *rev); @@ -40,9 +40,11 @@ void kirkwood_spi_init(void); void kirkwood_i2c_init(void); void kirkwood_uart0_init(void); void kirkwood_uart1_init(void); +void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay); extern int kirkwood_tclk; extern struct sys_timer kirkwood_timer; +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) #endif diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c new file mode 100644 index 0000000..f68d33f --- /dev/null +++ b/arch/arm/mach-kirkwood/cpuidle.c @@ -0,0 +1,96 @@ +/* + * arch/arm/mach-kirkwood/cpuidle.c + * + * CPU idle Marvell Kirkwood SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * The cpu idle uses wait-for-interrupt and DDR self refresh in order + * to implement two idle states - + * #1 wait-for-interrupt + * #2 wait-for-interrupt and DDR self refresh + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/cpuidle.h> +#include <linux/io.h> +#include <asm/proc-fns.h> +#include <mach/kirkwood.h> + +#define KIRKWOOD_MAX_STATES 2 + +static struct cpuidle_driver kirkwood_idle_driver = { + .name = "kirkwood_idle", + .owner = THIS_MODULE, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device); + +/* Actual code that puts the SoC in different idle states */ +static int kirkwood_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct timeval before, after; + int idle_time; + + local_irq_disable(); + do_gettimeofday(&before); + if (state == &dev->states[0]) + /* Wait for interrupt state */ + cpu_do_idle(); + else if (state == &dev->states[1]) { + /* + * Following write will put DDR in self refresh. + * Note that we have 256 cycles before DDR puts it + * self in self-refresh, so the wait-for-interrupt + * call afterwards won't get the DDR from self refresh + * mode. + */ + writel(0x7, DDR_OPERATION_BASE); + cpu_do_idle(); + } + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + return idle_time; +} + +/* Initialize CPU idle by registering the idle states */ +static int kirkwood_init_cpuidle(void) +{ + struct cpuidle_device *device; + + cpuidle_register_driver(&kirkwood_idle_driver); + + device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id()); + device->state_count = KIRKWOOD_MAX_STATES; + + /* Wait for interrupt state */ + device->states[0].enter = kirkwood_enter_idle; + device->states[0].exit_latency = 1; + device->states[0].target_residency = 10000; + device->states[0].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[0].name, "WFI"); + strcpy(device->states[0].desc, "Wait for interrupt"); + + /* Wait for interrupt and DDR self refresh state */ + device->states[1].enter = kirkwood_enter_idle; + device->states[1].exit_latency = 10; + device->states[1].target_residency = 10000; + device->states[1].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[1].name, "DDR SR"); + strcpy(device->states[1].desc, "WFI and DDR Self Refresh"); + + if (cpuidle_register_device(device)) { + printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n"); + return -EIO; + } + return 0; +} + +device_initcall(kirkwood_init_cpuidle); diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index 5505d58..39bdf4b 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -11,14 +11,12 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> -#include <plat/orion_nand.h> #include <plat/mvsdio.h> #include "common.h" #include "mpp.h" @@ -39,32 +37,6 @@ static struct mtd_partition db88f6281_nand_parts[] = { }, }; -static struct resource db88f6281_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KIRKWOOD_NAND_MEM_PHYS_BASE, - .end = KIRKWOOD_NAND_MEM_PHYS_BASE + - KIRKWOOD_NAND_MEM_SIZE - 1, -}; - -static struct orion_nand_data db88f6281_nand_data = { - .parts = db88f6281_nand_parts, - .nr_parts = ARRAY_SIZE(db88f6281_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, - .chip_delay = 25, -}; - -static struct platform_device db88f6281_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &db88f6281_nand_data, - }, - .resource = &db88f6281_nand_resource, - .num_resources = 1, -}; - static struct mv643xx_eth_platform_data db88f6281_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; @@ -92,13 +64,12 @@ static void __init db88f6281_init(void) kirkwood_init(); kirkwood_mpp_conf(db88f6281_mpp_config); + kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25); kirkwood_ehci_init(); kirkwood_ge00_init(&db88f6281_ge00_data); kirkwood_sata_init(&db88f6281_sata_data); kirkwood_uart0_init(); kirkwood_sdio_init(&db88f6281_mvsdio_data); - - platform_device_register(&db88f6281_nand_flash); } static int __init db88f6281_pci_init(void) diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 4f7029f..9e80d92 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -17,12 +17,15 @@ #define CPU_RESET 0x00000002 #define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define WDT_RESET_OUT_EN 0x00000002 #define SOFT_RESET_OUT_EN 0x00000004 #define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) #define SOFT_RESET 0x00000001 #define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define WDT_INT_REQ 0x0008 + #define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) #define BRIDGE_INT_TIMER0 0x0002 #define BRIDGE_INT_TIMER1 0x0004 @@ -39,4 +42,22 @@ #define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) #define L2_WRITETHROUGH 0x00000010 +#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE | 0x11c) +#define CGC_GE0 (1 << 0) +#define CGC_PEX0 (1 << 2) +#define CGC_USB0 (1 << 3) +#define CGC_SDIO (1 << 4) +#define CGC_TSU (1 << 5) +#define CGC_DUNIT (1 << 6) +#define CGC_RUNIT (1 << 7) +#define CGC_XOR0 (1 << 8) +#define CGC_AUDIO (1 << 9) +#define CGC_SATA0 (1 << 14) +#define CGC_SATA1 (1 << 15) +#define CGC_XOR1 (1 << 16) +#define CGC_CRYPTO (1 << 17) +#define CGC_GE1 (1 << 19) +#define CGC_TDM (1 << 20) +#define CGC_RESERVED ((1 << 18) | (0x6 << 21)) + #endif diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h index be07be0..a643a84 100644 --- a/arch/arm/mach-kirkwood/include/mach/io.h +++ b/arch/arm/mach-kirkwood/include/mach/io.h @@ -19,6 +19,31 @@ static inline void __iomem *__io(unsigned long addr) + KIRKWOOD_PCIE_IO_VIRT_BASE); } +static inline void __iomem * +__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype) +{ + void __iomem *retval; + unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE; + if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE && + size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) { + retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs; + } else { + retval = __arm_ioremap(paddr, size, mtype); + } + + return retval; +} + +static inline void +__arch_iounmap(void __iomem *addr) +{ + if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE || + addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE)) + __iounmap(addr); +} + +#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m) +#define __arch_iounmap(a) __arch_iounmap(a) #define __io(a) __io(a) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index b3e1395..07af858 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -20,16 +20,18 @@ * f1000000 on-chip peripheral registers * f2000000 PCIe I/O space * f3000000 NAND controller address window + * f4000000 Security Accelerator SRAM * * virt phys size * fee00000 f1000000 1M on-chip peripheral registers * fef00000 f2000000 1M PCIe I/O space */ +#define KIRKWOOD_SRAM_PHYS_BASE 0xf4000000 +#define KIRKWOOD_SRAM_SIZE SZ_2K + #define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000 -#define KIRKWOOD_NAND_MEM_SIZE SZ_64K /* 1K is sufficient, but 64K - * is the minimal window size - */ +#define KIRKWOOD_NAND_MEM_SIZE SZ_1K #define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 #define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000 @@ -48,6 +50,7 @@ */ #define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000) #define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500) +#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418) #define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000) #define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000) @@ -63,7 +66,11 @@ #define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) +#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000) + #define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) +#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70) +#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04) #define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) @@ -80,6 +87,11 @@ #define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000) #define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000) +#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x80000) +#define SATA0_IF_CTRL (SATA_VIRT_BASE | 0x2050) +#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE | 0x2330) +#define SATA1_IF_CTRL (SATA_VIRT_BASE | 0x4050) +#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE | 0x4330) #define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000) diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 63c4493..a5900f6 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -48,6 +48,9 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list) if (!variant_mask) return; + /* Initialize gpiolib. */ + orion_gpio_init(); + printk(KERN_DEBUG "initial MPP regs:"); for (i = 0; i < MPP_NR_REGS; i++) { mpp_ctrl[i] = readl(MPP_CTRL(i)); diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c new file mode 100644 index 0000000..0358f45 --- /dev/null +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -0,0 +1,173 @@ +/* + * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c + * + * Marvell 88F6281 GTW GE Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/timer.h> +#include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/spi/orion_spi.h> +#include <net/dsa.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_NONE, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, +}; + +static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = { + .port_names[0] = "lan1", + .port_names[1] = "lan2", + .port_names[2] = "lan3", + .port_names[3] = "lan4", + .port_names[4] = "wan", + .port_names[5] = "cpu", +}; + +static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = { + .nr_chips = 1, + .chip = &mv88f6281gtw_ge_switch_chip_data, +}; + +static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = { + .type = "mx25l12805d", +}; + +static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &mv88f6281gtw_ge_spi_slave_data, + .irq = -1, + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = { + { + .code = KEY_RESTART, + .gpio = 47, + .desc = "SWR Button", + .active_low = 1, + }, { + .code = KEY_F1, + .gpio = 46, + .desc = "WPS Button(F1)", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = { + .buttons = mv88f6281gtw_ge_button_pins, + .nbuttons = ARRAY_SIZE(mv88f6281gtw_ge_button_pins), +}; + +static struct platform_device mv88f6281gtw_ge_buttons = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &mv88f6281gtw_ge_button_data, + }, +}; + +static struct gpio_led mv88f6281gtw_ge_led_pins[] = { + { + .name = "gtw:green:Status", + .gpio = 20, + .active_low = 0, + }, { + .name = "gtw:red:Status", + .gpio = 21, + .active_low = 0, + }, { + .name = "gtw:green:USB", + .gpio = 12, + .active_low = 0, + }, +}; + +static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = { + .leds = mv88f6281gtw_ge_led_pins, + .num_leds = ARRAY_SIZE(mv88f6281gtw_ge_led_pins), +}; + +static struct platform_device mv88f6281gtw_ge_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &mv88f6281gtw_ge_led_data, + }, +}; + +static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = { + MPP12_GPO, /* Status#_USB pin */ + MPP20_GPIO, /* Status#_GLED pin */ + MPP21_GPIO, /* Status#_RLED pin */ + MPP46_GPIO, /* WPS_Switch pin */ + MPP47_GPIO, /* SW_Init pin */ + 0 +}; + +static void __init mv88f6281gtw_ge_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data); + kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ); + spi_register_board_info(mv88f6281gtw_ge_spi_slave_info, + ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_uart0_init(); + platform_device_register(&mv88f6281gtw_ge_leds); + platform_device_register(&mv88f6281gtw_ge_buttons); +} + +static int __init mv88f6281gtw_ge_pci_init(void) +{ + if (machine_is_mv88f6281gtw_ge()) + kirkwood_pcie_init(); + + return 0; +} +subsys_initcall(mv88f6281gtw_ge_pci_init); + +MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") + /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = mv88f6281gtw_ge_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 73fccac..d90b9aa 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -14,6 +14,7 @@ #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> +#include <mach/bridge-regs.h> #include "common.h" @@ -95,6 +96,7 @@ static struct pci_ops pcie_ops = { static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) { struct resource *res; + extern unsigned int kirkwood_clk_ctrl; /* * Generic PCIe unit setup. @@ -133,6 +135,8 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) sys->resource[2] = NULL; sys->io_offset = 0; + kirkwood_clk_ctrl |= CGC_PEX0; + return 1; } diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index 2f0e4ef..8bf4153 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -11,8 +11,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/spi/flash.h> diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 31e996d..31708dd 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/irq.h> -#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> @@ -22,7 +21,6 @@ #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include <plat/mvsdio.h> -#include <plat/orion_nand.h> #include "common.h" #include "mpp.h" @@ -42,32 +40,6 @@ static struct mtd_partition rd88f6281_nand_parts[] = { }, }; -static struct resource rd88f6281_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KIRKWOOD_NAND_MEM_PHYS_BASE, - .end = KIRKWOOD_NAND_MEM_PHYS_BASE + - KIRKWOOD_NAND_MEM_SIZE - 1, -}; - -static struct orion_nand_data rd88f6281_nand_data = { - .parts = rd88f6281_nand_parts, - .nr_parts = ARRAY_SIZE(rd88f6281_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, - .chip_delay = 25, -}; - -static struct platform_device rd88f6281_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &rd88f6281_nand_data, - }, - .resource = &rd88f6281_nand_resource, - .num_resources = 1, -}; - static struct mv643xx_eth_platform_data rd88f6281_ge00_data = { .phy_addr = MV643XX_ETH_PHY_NONE, .speed = SPEED_1000, @@ -114,6 +86,7 @@ static void __init rd88f6281_init(void) kirkwood_init(); kirkwood_mpp_conf(rd88f6281_mpp_config); + kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25); kirkwood_ehci_init(); kirkwood_ge00_init(&rd88f6281_ge00_data); @@ -129,8 +102,6 @@ static void __init rd88f6281_init(void) kirkwood_sata_init(&rd88f6281_sata_data); kirkwood_sdio_init(&rd88f6281_mvsdio_data); kirkwood_uart0_init(); - - platform_device_register(&rd88f6281_nand_flash); } static int __init rd88f6281_pci_init(void) diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 831e4a5..c7319ee 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -11,7 +11,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> @@ -20,7 +19,6 @@ #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include <plat/mvsdio.h> -#include <plat/orion_nand.h> #include "common.h" #include "mpp.h" @@ -40,38 +38,12 @@ static struct mtd_partition sheevaplug_nand_parts[] = { }, }; -static struct resource sheevaplug_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KIRKWOOD_NAND_MEM_PHYS_BASE, - .end = KIRKWOOD_NAND_MEM_PHYS_BASE + - KIRKWOOD_NAND_MEM_SIZE - 1, -}; - -static struct orion_nand_data sheevaplug_nand_data = { - .parts = sheevaplug_nand_parts, - .nr_parts = ARRAY_SIZE(sheevaplug_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, - .chip_delay = 25, -}; - -static struct platform_device sheevaplug_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &sheevaplug_nand_data, - }, - .resource = &sheevaplug_nand_resource, - .num_resources = 1, -}; - static struct mv643xx_eth_platform_data sheevaplug_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; static struct mvsdio_platform_data sheevaplug_mvsdio_data = { - // unfortunately the CD signal has not been connected */ + /* unfortunately the CD signal has not been connected */ }; static struct gpio_led sheevaplug_led_pins[] = { @@ -111,6 +83,7 @@ static void __init sheevaplug_init(void) kirkwood_mpp_conf(sheevaplug_mpp_config); kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25); if (gpio_request(29, "USB Power Enable") != 0 || gpio_direction_output(29, 1) != 0) @@ -120,7 +93,6 @@ static void __init sheevaplug_init(void) kirkwood_ge00_init(&sheevaplug_ge00_data); kirkwood_sdio_init(&sheevaplug_mvsdio_data); - platform_device_register(&sheevaplug_nand_flash); platform_device_register(&sheevaplug_leds); } diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index dda5743..01aa213 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -142,6 +142,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP1_SPI_MOSI, MPP2_SPI_SCK, MPP3_SPI_MISO, + MPP4_SATA1_ACTn, + MPP5_SATA0_ACTn, MPP8_TW_SDA, MPP9_TW_SCK, MPP10_UART0_TXD, @@ -150,10 +152,6 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP14_UART1_RXD, /* PIC controller */ MPP15_GPIO, /* USB Copy button */ MPP16_GPIO, /* Reset button */ - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_SATA1_PRESENTn, - MPP23_SATA0_PRESENTn, 0 }; diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h index 2d7722b..e9729a3 100644 --- a/arch/arm/mach-l7200/include/mach/sys-clock.h +++ b/arch/arm/mach-l7200/include/mach/sys-clock.h @@ -18,7 +18,7 @@ /* IO_START and IO_BASE are defined in hardware.h */ -#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF) /* Physical address */ +#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF) /* Physical address */ #define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */ /* Define the interface to the SYS_CLOCK */ diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c index c0d2d9d..818f19d 100644 --- a/arch/arm/mach-loki/common.c +++ b/arch/arm/mach-loki/common.c @@ -82,6 +82,9 @@ static struct platform_device loki_ge0 = { .id = 0, .num_resources = 1, .resource = loki_ge0_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data) @@ -136,6 +139,9 @@ static struct platform_device loki_ge1 = { .id = 1, .num_resources = 1, .resource = loki_ge1_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data) diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index d0bdb6e..2e91464 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -3,6 +3,11 @@ #include <mach/mfp.h> +#define MFP_DRIVE_VERY_SLOW (0x0 << 13) +#define MFP_DRIVE_SLOW (0x1 << 13) +#define MFP_DRIVE_MEDIUM (0x2 << 13) +#define MFP_DRIVE_FAST (0x3 << 13) + /* GPIO */ #define GPIO0_GPIO MFP_CFG(GPIO0, AF5) #define GPIO1_GPIO MFP_CFG(GPIO1, AF5) diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h index 48a1cbc..d97de36 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h @@ -3,6 +3,11 @@ #include <mach/mfp.h> +#define MFP_DRIVE_VERY_SLOW (0x0 << 13) +#define MFP_DRIVE_SLOW (0x2 << 13) +#define MFP_DRIVE_MEDIUM (0x4 << 13) +#define MFP_DRIVE_FAST (0x8 << 13) + /* UART2 */ #define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6) #define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6) diff --git a/arch/arm/mach-mmp/include/mach/mfp.h b/arch/arm/mach-mmp/include/mach/mfp.h index 277ea4c..62e510e 100644 --- a/arch/arm/mach-mmp/include/mach/mfp.h +++ b/arch/arm/mach-mmp/include/mach/mfp.h @@ -12,16 +12,13 @@ * possible, we make the following compromise: * * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT) - * 2. DRIVE strength definitions redefined to include the reserved bit10 + * 2. DRIVE strength definitions redefined to include the reserved bit + * - the reserved bit differs between pxa168 and pxa910, and the + * MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h * 3. Override MFP_CFG() and MFP_CFG_DRV() * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X() */ -#define MFP_DRIVE_VERY_SLOW (0x0 << 13) -#define MFP_DRIVE_SLOW (0x2 << 13) -#define MFP_DRIVE_MEDIUM (0x4 << 13) -#define MFP_DRIVE_FAST (0x8 << 13) - #undef MFP_CFG #undef MFP_CFG_DRV #undef MFP_CFG_LPM diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index b03a6ed..a8400bb 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -136,7 +136,7 @@ static struct clock_event_device ckevt = { .set_mode = timer_set_mode, }; -static cycle_t clksrc_read(void) +static cycle_t clksrc_read(struct clocksource *cs) { return timer_read(); } diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 9ba5950..1b22e4a 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -321,6 +321,9 @@ static struct platform_device mv78xx0_ge00 = { .id = 0, .num_resources = 1, .resource = mv78xx0_ge00_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) @@ -375,6 +378,9 @@ static struct platform_device mv78xx0_ge01 = { .id = 1, .num_resources = 1, .resource = mv78xx0_ge01_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) @@ -429,6 +435,9 @@ static struct platform_device mv78xx0_ge10 = { .id = 2, .num_resources = 1, .resource = mv78xx0_ge10_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) @@ -496,6 +505,9 @@ static struct platform_device mv78xx0_ge11 = { .id = 3, .num_resources = 1, .resource = mv78xx0_ge11_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) @@ -532,12 +544,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = { static struct resource mv78xx0_i2c_0_resources[] = { { - .name = "i2c 0 base", .start = I2C_0_PHYS_BASE, .end = I2C_0_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c 0 irq", .start = IRQ_MV78XX0_I2C_0, .end = IRQ_MV78XX0_I2C_0, .flags = IORESOURCE_IRQ, @@ -567,12 +577,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = { static struct resource mv78xx0_i2c_1_resources[] = { { - .name = "i2c 1 base", .start = I2C_1_PHYS_BASE, .end = I2C_1_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c 1 irq", .start = IRQ_MV78XX0_I2C_1, .end = IRQ_MV78XX0_I2C_1, .flags = IORESOURCE_IRQ, diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index f289b0e..22b4ff8 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -28,6 +28,9 @@ void __init mv78xx0_init_irq(void) { int i; + /* Initialize gpiolib. */ + orion_gpio_init(); + orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF)); diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c index 0dec6f3..7622c9b 100644 --- a/arch/arm/mach-mx1/generic.c +++ b/arch/arm/mach-mx1/generic.c @@ -26,6 +26,7 @@ #include <asm/mach/map.h> +#include <mach/common.h> #include <mach/hardware.h> static struct map_desc imx_io_desc[] __initdata = { @@ -37,7 +38,9 @@ static struct map_desc imx_io_desc[] __initdata = { } }; -void __init mxc_map_io(void) +void __init mx1_map_io(void) { + mxc_set_cpu_type(MXC_CPU_MX1); + iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); } diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index e54057f..e5b0c0a 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -12,77 +12,56 @@ * warranty of any kind, whether express or implied. */ -#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/i2c/pcf857x.h> #include <linux/init.h> +#include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> -#include <linux/i2c.h> -#include <linux/i2c/pcf857x.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/irqs.h> -#include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> -#include <mach/irqs.h> +#include <mach/hardware.h> #include <mach/i2c.h> +#include <mach/imx-uart.h> #include <mach/iomux.h> +#include <mach/irqs.h> + #include "devices.h" -/* - * UARTs platform data - */ -static int mxc_uart1_pins[] = { +static int mx1ads_pins[] = { + /* UART1 */ PC9_PF_UART1_CTS, PC10_PF_UART1_RTS, PC11_PF_UART1_TXD, PC12_PF_UART1_RXD, -}; - -static int uart1_mxc_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); -} - -static int uart1_mxc_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins)); - return 0; -} - -static int mxc_uart2_pins[] = { + /* UART2 */ PB28_PF_UART2_CTS, PB29_PF_UART2_RTS, PB30_PF_UART2_TXD, PB31_PF_UART2_RXD, + /* I2C */ + PA15_PF_I2C_SDA, + PA16_PF_I2C_SCL, + /* SPI */ + PC13_PF_SPI1_SPI_RDY, + PC14_PF_SPI1_SCLK, + PC15_PF_SPI1_SS, + PC16_PF_SPI1_MISO, + PC17_PF_SPI1_MOSI, }; -static int uart2_mxc_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins), "UART2"); -} - -static int uart2_mxc_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins)); - return 0; -} +/* + * UARTs platform data + */ static struct imxuart_platform_data uart_pdata[] = { { - .init = uart1_mxc_init, - .exit = uart1_mxc_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart2_mxc_init, - .exit = uart2_mxc_exit, .flags = IMXUART_HAVE_RTSCTS, }, }; @@ -111,24 +90,6 @@ static struct platform_device flash_device = { /* * I2C */ - -static int i2c_pins[] = { - PA15_PF_I2C_SDA, - PA16_PF_I2C_SCL, -}; - -static int i2c_init(struct device *dev) -{ - return mxc_gpio_setup_multiple_pins(i2c_pins, - ARRAY_SIZE(i2c_pins), "I2C"); -} - -static void i2c_exit(struct device *dev) -{ - mxc_gpio_release_multiple_pins(i2c_pins, - ARRAY_SIZE(i2c_pins)); -} - static struct pcf857x_platform_data pcf857x_data[] = { { .gpio_base = 4 * 32, @@ -139,8 +100,6 @@ static struct pcf857x_platform_data pcf857x_data[] = { static struct imxi2c_platform_data mx1ads_i2c_data = { .bitrate = 100000, - .init = i2c_init, - .exit = i2c_exit, }; static struct i2c_board_info mx1ads_i2c_devices[] = { @@ -160,6 +119,9 @@ static struct i2c_board_info mx1ads_i2c_devices[] = { */ static void __init mx1ads_init(void) { + mxc_gpio_setup_multiple_pins(mx1ads_pins, + ARRAY_SIZE(mx1ads_pins), "mx1ads"); + /* UART */ mxc_register_device(&imx_uart1_device, &uart_pdata[0]); mxc_register_device(&imx_uart2_device, &uart_pdata[1]); @@ -188,7 +150,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") .phys_io = IMX_IO_PHYS, .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx1_map_io, .init_irq = mxc_init_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, @@ -198,7 +160,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS") .phys_io = IMX_IO_PHYS, .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx1_map_io, .init_irq = mxc_init_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c index 0e71f3f..20e0b5b 100644 --- a/arch/arm/mach-mx1/scb9328.c +++ b/arch/arm/mach-mx1/scb9328.c @@ -153,7 +153,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328") .phys_io = 0x00200000, .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc, .boot_params = 0x08000100, - .map_io = mxc_map_io, + .map_io = mx1_map_io, .init_irq = mxc_init_irq, .timer = &scb9328_timer, .init_machine = scb9328_init, diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 42a7888..c77da58 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -18,6 +18,13 @@ endchoice comment "MX2 platforms:" +config MACH_MX21ADS + bool "MX21ADS platform" + depends on MACH_MX21 + help + Include support for MX21ADS platform. This includes specific + configurations for the board and its peripherals. + config MACH_MX27ADS bool "MX27ADS platform" depends on MACH_MX27 @@ -46,4 +53,18 @@ config MACH_PCM970_BASEBOARD endchoice +config MACH_MX27_3DS + bool "MX27PDK platform" + depends on MACH_MX27 + help + Include support for MX27PDK platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX27LITE + bool "LogicPD MX27 LITEKIT platform" + depends on MACH_MX27 + help + Include support for MX27 LITEKIT platform. This includes specific + configurations for the board and its peripherals. + endif diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index 950649a..b9b1cca 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -11,6 +11,10 @@ obj-$(CONFIG_MACH_MX21) += clock_imx21.o obj-$(CONFIG_MACH_MX27) += cpu_imx27.o obj-$(CONFIG_MACH_MX27) += clock_imx27.o +obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o obj-$(CONFIG_MACH_PCM038) += pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o +obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o +obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o + diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index 999d013..fa2b292 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -48,6 +48,25 @@ static void _clk_disable(struct clk *clk) __raw_writel(reg, clk->enable_reg); } +static unsigned long _clk_generic_round_rate(struct clk *clk, + unsigned long rate, + u32 max_divisor) +{ + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (parent_rate % rate) + div++; + + if (div > max_divisor) + div = max_divisor; + + return parent_rate / div; +} + static int _clk_spll_enable(struct clk *clk) { u32 reg; @@ -78,19 +97,7 @@ static void _clk_spll_disable(struct clk *clk) static unsigned long _clk_perclkx_round_rate(struct clk *clk, unsigned long rate) { - u32 div; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - - div = parent_rate / rate; - if (parent_rate % rate) - div++; - - if (div > 64) - div = 64; - - return parent_rate / div; + return _clk_generic_round_rate(clk, rate, 64); } static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate) @@ -130,6 +137,32 @@ static unsigned long _clk_usb_recalc(struct clk *clk) return parent_rate / (usb_pdf + 1U); } +static unsigned long _clk_usb_round_rate(struct clk *clk, + unsigned long rate) +{ + return _clk_generic_round_rate(clk, rate, 8); +} + +static int _clk_usb_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (div > 8 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + div--; + + reg = CSCR() & ~CCM_CSCR_USB_MASK; + reg |= div << CCM_CSCR_USB_OFFSET; + __raw_writel(reg, CCM_CSCR); + + return 0; +} + static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf) { unsigned long parent_rate; @@ -595,11 +628,14 @@ static struct clk csi_clk[] = { static struct clk usb_clk[] = { { .parent = &spll_clk, + .secondary = &usb_clk[1], .get_rate = _clk_usb_recalc, .enable = _clk_enable, .enable_reg = CCM_PCCR_USBOTG_REG, .enable_shift = CCM_PCCR_USBOTG_OFFSET, .disable = _clk_disable, + .round_rate = _clk_usb_round_rate, + .set_rate = _clk_usb_set_rate, }, { .parent = &hclk_clk, .enable = _clk_enable, @@ -768,18 +804,7 @@ static struct clk rtc_clk = { static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate) { - u32 div; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - div = parent_rate / rate; - if (parent_rate % rate) - div++; - - if (div > 8) - div = 8; - - return parent_rate / div; + return _clk_generic_round_rate(clk, rate, 8); } static int _clk_clko_set_rate(struct clk *clk, unsigned long rate) @@ -921,7 +946,7 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2]) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0]) _REGISTER_CLOCK(NULL, "csi", csi_clk[0]) - _REGISTER_CLOCK(NULL, "usb", usb_clk[0]) + _REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0]) _REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0]) _REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1]) _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c index bd51dd0..169372f 100644 --- a/arch/arm/mach-mx2/generic.c +++ b/arch/arm/mach-mx2/generic.c @@ -69,7 +69,17 @@ static struct map_desc mxc_io_desc[] __initdata = { * system startup to create static physical to virtual * memory map for the IO modules. */ -void __init mxc_map_io(void) +void __init mx21_map_io(void) { + mxc_set_cpu_type(MXC_CPU_MX21); + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } + +void __init mx27_map_io(void) +{ + mxc_set_cpu_type(MXC_CPU_MX27); + + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} + diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c new file mode 100644 index 0000000..a5ee461 --- /dev/null +++ b/arch/arm/mach-mx2/mx21ads.c @@ -0,0 +1,286 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/physmap.h> +#include <linux/gpio.h> +#include <mach/common.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <mach/imx-uart.h> +#include <mach/imxfb.h> +#include <mach/iomux.h> +#include <mach/mxc_nand.h> +#include <mach/mmc.h> +#include <mach/board-mx21ads.h> + +#include "devices.h" + +static unsigned int mx21ads_pins[] = { + + /* CS8900A */ + (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11), + + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + + /* UART3 (IrDA) - only TXD and RXD */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + + /* UART4 */ + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD, + + /* LCDC */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA24_PF_REV, /* Sharp panel dedicated signal */ + PA25_PF_CLS, /* Sharp panel dedicated signal */ + PA26_PF_PS, /* Sharp panel dedicated signal */ + PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */ + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + + /* MMC/SDHC */ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + + /* NFC */ + PF0_PF_NRFB, + PF1_PF_NFCE, + PF2_PF_NFWP, + PF3_PF_NFCLE, + PF4_PF_NFALE, + PF5_PF_NFRE, + PF6_PF_NFWE, + PF7_PF_NFIO0, + PF8_PF_NFIO1, + PF9_PF_NFIO2, + PF10_PF_NFIO3, + PF11_PF_NFIO4, + PF12_PF_NFIO5, + PF13_PF_NFIO6, + PF14_PF_NFIO7, +}; + +/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */ +static struct physmap_flash_data mx21ads_flash_data = { + .width = 4, +}; + +static struct resource mx21ads_flash_resource = { + .start = CS0_BASE_ADDR, + .end = CS0_BASE_ADDR + 0x02000000 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mx21ads_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &mx21ads_flash_data, + }, + .num_resources = 1, + .resource = &mx21ads_flash_resource, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct imxuart_platform_data uart_norts_pdata = { +}; + + +static int mx21ads_fb_init(struct platform_device *pdev) +{ + u16 tmp; + + tmp = __raw_readw(MX21ADS_IO_REG); + tmp |= MX21ADS_IO_LCDON; + __raw_writew(tmp, MX21ADS_IO_REG); + return 0; +} + +static void mx21ads_fb_exit(struct platform_device *pdev) +{ + u16 tmp; + + tmp = __raw_readw(MX21ADS_IO_REG); + tmp &= ~MX21ADS_IO_LCDON; + __raw_writew(tmp, MX21ADS_IO_REG); +} + +/* + * Connected is a portrait Sharp-QVGA display + * of type: LQ035Q7DB02 + */ +static struct imx_fb_platform_data mx21ads_fb_data = { + .pixclock = 188679, /* in ps */ + .xres = 240, + .yres = 320, + + .bpp = 16, + .hsync_len = 2, + .left_margin = 6, + .right_margin = 16, + + .vsync_len = 1, + .upper_margin = 8, + .lower_margin = 10, + .fixed_screen_cpu = 0, + + .pcr = 0xFB108BC7, + .pwmr = 0x00A901ff, + .lscr1 = 0x00120300, + .dmacr = 0x00020008, + + .init = mx21ads_fb_init, + .exit = mx21ads_fb_exit, +}; + +static int mx21ads_sdhc_get_ro(struct device *dev) +{ + return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0; +} + +static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = request_irq(IRQ_GPIOD(25), detect_irq, + IRQF_TRIGGER_FALLING, "mmc-detect", data); + if (ret) + goto out; + return 0; +out: + return ret; +} + +static void mx21ads_sdhc_exit(struct device *dev, void *data) +{ + free_irq(IRQ_GPIOD(25), data); +} + +static struct imxmmc_platform_data mx21ads_sdhc_pdata = { + .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */ + .get_ro = mx21ads_sdhc_get_ro, + .init = mx21ads_sdhc_init, + .exit = mx21ads_sdhc_exit, +}; + +static struct mxc_nand_platform_data mx21ads_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + +static struct map_desc mx21ads_io_desc[] __initdata = { + /* + * Memory-mapped I/O on MX21ADS Base board: + * - CS8900A Ethernet controller + * - ST16C2552CJ UART + * - CPU and Base board version + * - Base board I/O register + */ + { + .virtual = MX21ADS_MMIO_BASE_ADDR, + .pfn = __phys_to_pfn(CS1_BASE_ADDR), + .length = MX21ADS_MMIO_SIZE, + .type = MT_DEVICE, + }, +}; + +static void __init mx21ads_map_io(void) +{ + mx21_map_io(); + iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc)); +} + +static struct platform_device *platform_devices[] __initdata = { + &mx21ads_nor_mtd_device, +}; + +static void __init mx21ads_board_init(void) +{ + mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins), + "mx21ads"); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_uart_device2, &uart_norts_pdata); + mxc_register_device(&mxc_uart_device3, &uart_pdata); + mxc_register_device(&mxc_fb_device, &mx21ads_fb_data); + mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata); + mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mx21ads_timer_init(void) +{ + mx21_clocks_init(32768, 26000000); +} + +static struct sys_timer mx21ads_timer = { + .init = mx21ads_timer_init, +}; + +MACHINE_START(MX21ADS, "Freescale i.MX21ADS") + /* maintainer: Freescale Semiconductor, Inc. */ + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx21ads_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx21ads_board_init, + .timer = &mx21ads_timer, +MACHINE_END diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c index 4a3b097..02dadda 100644 --- a/arch/arm/mach-mx2/mx27ads.c +++ b/arch/arm/mach-mx2/mx27ads.c @@ -23,6 +23,8 @@ #include <linux/mtd/map.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/irq.h> #include <mach/common.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -33,9 +35,117 @@ #include <mach/imx-uart.h> #include <mach/iomux.h> #include <mach/board-mx27ads.h> +#include <mach/mxc_nand.h> +#include <mach/i2c.h> +#include <mach/imxfb.h> +#include <mach/mmc.h> #include "devices.h" +static unsigned int mx27ads_pins[] = { + /* UART0 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* UART1 */ + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD, + /* UART2 */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE11_PF_UART3_RTS, + /* UART3 */ + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD, + /* UART4 */ + PB18_AF_UART5_TXD, + PB19_AF_UART5_RXD, + PB20_AF_UART5_CTS, + PB21_AF_UART5_RTS, + /* UART5 */ + PB10_AF_UART6_TXD, + PB12_AF_UART6_CTS, + PB11_AF_UART6_RXD, + PB13_AF_UART6_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* I2C2 */ + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* FB */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA24_PF_REV, + PA25_PF_CLS, + PA26_PF_PS, + PA27_PF_SPL_SPR, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + /* OWIRE */ + PE16_AF_OWIRE, + /* SDHC1*/ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + /* SDHC2*/ + PB4_PF_SD2_D0, + PB5_PF_SD2_D1, + PB6_PF_SD2_D2, + PB7_PF_SD2_D3, + PB8_PF_SD2_CMD, + PB9_PF_SD2_CLK, +}; + +static struct mxc_nand_platform_data mx27ads_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + /* ADS's NOR flash */ static struct physmap_flash_data mx27ads_flash_data = { .width = 2, @@ -58,189 +168,113 @@ static struct platform_device mx27ads_nor_mtd_device = { .resource = &mx27ads_flash_resource, }; -static int mxc_uart0_pins[] = { - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS +static struct imxi2c_platform_data mx27ads_i2c_data = { + .bitrate = 100000, }; -static int uart_mxc_port0_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins), "UART0"); -} - -static int uart_mxc_port0_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins)); - return 0; -} - -static int mxc_uart1_pins[] = { - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD +static struct i2c_board_info mx27ads_i2c_devices[] = { }; -static int uart_mxc_port1_init(struct platform_device *pdev) +void lcd_power(int on) { - return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); + if (on) + __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG); + else + __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); } -static int uart_mxc_port1_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins)); - return 0; -} - -static int mxc_uart2_pins[] = { - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS +static struct imx_fb_platform_data mx27ads_fb_data = { + .pixclock = 188679, + .xres = 240, + .yres = 320, + + .bpp = 16, + .hsync_len = 1, + .left_margin = 9, + .right_margin = 16, + + .vsync_len = 1, + .upper_margin = 7, + .lower_margin = 9, + .fixed_screen_cpu = 0, + + /* + * - HSYNC active high + * - VSYNC active high + * - clk notenabled while idle + * - clock inverted + * - data not inverted + * - data enable low active + * - enable sharp mode + */ + .pcr = 0xFB008BC0, + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, + + .lcd_power = lcd_power, }; -static int uart_mxc_port2_init(struct platform_device *pdev) +static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) { - return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins), "UART2"); + return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING, + "sdhc1-card-detect", data); } -static int uart_mxc_port2_exit(struct platform_device *pdev) +static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) { - mxc_gpio_release_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins)); - return 0; + return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING, + "sdhc2-card-detect", data); } -static int mxc_uart3_pins[] = { - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD -}; - -static int uart_mxc_port3_init(struct platform_device *pdev) +static void mx27ads_sdhc1_exit(struct device *dev, void *data) { - return mxc_gpio_setup_multiple_pins(mxc_uart3_pins, - ARRAY_SIZE(mxc_uart3_pins), "UART3"); + free_irq(IRQ_GPIOE(21), data); } -static int uart_mxc_port3_exit(struct platform_device *pdev) +static void mx27ads_sdhc2_exit(struct device *dev, void *data) { - mxc_gpio_release_multiple_pins(mxc_uart3_pins, - ARRAY_SIZE(mxc_uart3_pins)); - return 0; + free_irq(IRQ_GPIOB(7), data); } -static int mxc_uart4_pins[] = { - PB18_AF_UART5_TXD, - PB19_AF_UART5_RXD, - PB20_AF_UART5_CTS, - PB21_AF_UART5_RTS +static struct imxmmc_platform_data sdhc1_pdata = { + .init = mx27ads_sdhc1_init, + .exit = mx27ads_sdhc1_exit, }; -static int uart_mxc_port4_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart4_pins, - ARRAY_SIZE(mxc_uart4_pins), "UART4"); -} - -static int uart_mxc_port4_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart4_pins, - ARRAY_SIZE(mxc_uart4_pins)); - return 0; -} - -static int mxc_uart5_pins[] = { - PB10_AF_UART6_TXD, - PB12_AF_UART6_CTS, - PB11_AF_UART6_RXD, - PB13_AF_UART6_RTS +static struct imxmmc_platform_data sdhc2_pdata = { + .init = mx27ads_sdhc2_init, + .exit = mx27ads_sdhc2_exit, }; -static int uart_mxc_port5_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart5_pins, - ARRAY_SIZE(mxc_uart5_pins), "UART5"); -} - -static int uart_mxc_port5_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart5_pins, - ARRAY_SIZE(mxc_uart5_pins)); - return 0; -} - static struct platform_device *platform_devices[] __initdata = { &mx27ads_nor_mtd_device, &mxc_fec_device, + &mxc_w1_master_device, }; -static int mxc_fec_pins[] = { - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN -}; - -static void gpio_fec_active(void) -{ - mxc_gpio_setup_multiple_pins(mxc_fec_pins, - ARRAY_SIZE(mxc_fec_pins), "FEC"); -} - static struct imxuart_platform_data uart_pdata[] = { { - .init = uart_mxc_port0_init, - .exit = uart_mxc_port0_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port1_init, - .exit = uart_mxc_port1_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port2_init, - .exit = uart_mxc_port2_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port3_init, - .exit = uart_mxc_port3_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port4_init, - .exit = uart_mxc_port4_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port5_init, - .exit = uart_mxc_port5_exit, .flags = IMXUART_HAVE_RTSCTS, }, }; static void __init mx27ads_board_init(void) { - gpio_fec_active(); + mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins), + "mx27ads"); mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); @@ -248,6 +282,15 @@ static void __init mx27ads_board_init(void) mxc_register_device(&mxc_uart_device3, &uart_pdata[3]); mxc_register_device(&mxc_uart_device4, &uart_pdata[4]); mxc_register_device(&mxc_uart_device5, &uart_pdata[5]); + mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info); + + /* only the i2c master 1 is used on this CPU card */ + i2c_register_board_info(1, mx27ads_i2c_devices, + ARRAY_SIZE(mx27ads_i2c_devices)); + mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data); + mxc_register_device(&mxc_fb_device, &mx27ads_fb_data); + mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); + mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } @@ -277,7 +320,7 @@ static struct map_desc mx27ads_io_desc[] __initdata = { static void __init mx27ads_map_io(void) { - mxc_map_io(); + mx27_map_io(); iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc)); } diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c new file mode 100644 index 0000000..3ae11cb --- /dev/null +++ b/arch/arm/mach-mx2/mx27lite.c @@ -0,0 +1,95 @@ +/* + * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux.h> +#include <mach/board-mx27lite.h> + +#include "devices.h" + +static unsigned int mx27lite_pins[] = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *platform_devices[] __initdata = { + &mxc_fec_device, +}; + +static void __init mx27lite_init(void) +{ + mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins), + "imx27lite"); + mxc_register_device(&mxc_uart_device0, &uart_pdata); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mx27lite_timer_init(void) +{ + mx27_clocks_init(26000000); +} + +static struct sys_timer mx27lite_timer = { + .init = mx27lite_timer_init, +}; + +MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx27lite_init, + .timer = &mx27lite_timer, +MACHINE_END diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c new file mode 100644 index 0000000..1d9238c --- /dev/null +++ b/arch/arm/mach-mx2/mx27pdk.c @@ -0,0 +1,95 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux.h> +#include <mach/board-mx27pdk.h> + +#include "devices.h" + +static unsigned int mx27pdk_pins[] = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *platform_devices[] __initdata = { + &mxc_fec_device, +}; + +static void __init mx27pdk_init(void) +{ + mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), + "mx27pdk"); + mxc_register_device(&mxc_uart_device0, &uart_pdata); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mx27pdk_timer_init(void) +{ + mx27_clocks_init(26000000); +} + +static struct sys_timer mx27pdk_timer = { + .init = mx27pdk_timer_init, +}; + +MACHINE_START(MX27_3DS, "Freescale MX27PDK") + /* maintainer: Freescale Semiconductor, Inc. */ + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx27pdk_init, + .timer = &mx27pdk_timer, +MACHINE_END diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c index aa4eaa6..a4628d0 100644 --- a/arch/arm/mach-mx2/pcm038.c +++ b/arch/arm/mach-mx2/pcm038.c @@ -17,28 +17,84 @@ * MA 02110-1301, USA. */ -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/plat-ram.h> -#include <linux/io.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> +#include <linux/io.h> +#include <linux/mtd/plat-ram.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> -#include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/board-pcm038.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/iomux.h> -#ifdef CONFIG_I2C_IMX #include <mach/i2c.h> -#endif -#include <asm/mach/time.h> +#include <mach/iomux.h> #include <mach/imx-uart.h> -#include <mach/board-pcm038.h> #include <mach/mxc_nand.h> #include "devices.h" +static int pcm038_pins[] = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* UART2 */ + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD, + /* UART3 */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE11_PF_UART3_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* I2C2 */ + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* SPI1 */ + PD25_PF_CSPI1_RDY, + PD27_PF_CSPI1_SS1, + PD28_PF_CSPI1_SS0, + PD29_PF_CSPI1_SCLK, + PD30_PF_CSPI1_MISO, + PD31_PF_CSPI1_MOSI, + /* SSI1 */ + PC20_PF_SSI1_FS, + PC21_PF_SSI1_RXD, + PC22_PF_SSI1_TXD, + PC23_PF_SSI1_CLK, + /* SSI4 */ + PC16_PF_SSI4_FS, + PC17_PF_SSI4_RXD, + PC18_PF_SSI4_TXD, + PC19_PF_SSI4_CLK, +}; + /* * Phytec's PCM038 comes with 2MiB battery buffered SRAM, * 16 bit width @@ -88,107 +144,16 @@ static struct platform_device pcm038_nor_mtd_device = { .resource = &pcm038_flash_resource, }; -static int mxc_uart0_pins[] = { - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS -}; - -static int uart_mxc_port0_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins), "UART0"); -} - -static int uart_mxc_port0_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins)); - return 0; -} - -static int mxc_uart1_pins[] = { - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD -}; - -static int uart_mxc_port1_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); -} - -static int uart_mxc_port1_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins)); - return 0; -} - -static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS }; - -static int uart_mxc_port2_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins), "UART2"); -} - -static int uart_mxc_port2_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins)); - return 0; -} - static struct imxuart_platform_data uart_pdata[] = { { - .init = uart_mxc_port0_init, - .exit = uart_mxc_port0_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port1_init, - .exit = uart_mxc_port1_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port2_init, - .exit = uart_mxc_port2_exit, .flags = IMXUART_HAVE_RTSCTS, }, }; -static int mxc_fec_pins[] = { - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN -}; - -static void gpio_fec_active(void) -{ - mxc_gpio_setup_multiple_pins(mxc_fec_pins, - ARRAY_SIZE(mxc_fec_pins), "FEC"); -} - static struct mxc_nand_platform_data pcm038_nand_board_info = { .width = 1, .hw_ecc = 1, @@ -210,27 +175,8 @@ static void __init pcm038_init_sram(void) __raw_writel(0x22220a00, CSCR_A(1)); } -#ifdef CONFIG_I2C_IMX -static int mxc_i2c1_pins[] = { - PC5_PF_I2C2_SDA, - PC6_PF_I2C2_SCL -}; - -static int pcm038_i2c_1_init(struct device *dev) -{ - return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins), - "I2C1"); -} - -static void pcm038_i2c_1_exit(struct device *dev) -{ - mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins)); -} - static struct imxi2c_platform_data pcm038_i2c_1_data = { .bitrate = 100000, - .init = pcm038_i2c_1_init, - .exit = pcm038_i2c_1_exit, }; static struct at24_platform_data board_eeprom = { @@ -253,11 +199,12 @@ static struct i2c_board_info pcm038_i2c_devices[] = { .type = "lm75" } }; -#endif static void __init pcm038_init(void) { - gpio_fec_active(); + mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), + "PCM038"); + pcm038_init_sram(); mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); @@ -267,13 +214,11 @@ static void __init pcm038_init(void) mxc_gpio_mode(PE16_AF_OWIRE); mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info); -#ifdef CONFIG_I2C_IMX /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, pcm038_i2c_devices, ARRAY_SIZE(pcm038_i2c_devices)); mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data); -#endif platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); @@ -295,7 +240,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27") .phys_io = AIPI_BASE_ADDR, .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx27_map_io, .init_irq = mxc_init_irq, .init_machine = pcm038_init, .timer = &pcm038_timer, diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c index bf4e520..6a3acaf5 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -16,71 +16,107 @@ * MA 02110-1301, USA. */ -#include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/irq.h> +#include <linux/platform_device.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> #include <mach/common.h> -#include <mach/mmc.h> -#include <mach/imxfb.h> #include <mach/iomux.h> +#include <mach/imxfb.h> +#include <mach/hardware.h> +#include <mach/mmc.h> #include "devices.h" -static int pcm970_sdhc2_get_ro(struct device *dev) -{ - return gpio_get_value(GPIO_PORTC + 28); -} - -static int pcm970_sdhc2_pins[] = { +static int pcm970_pins[] = { + /* SDHC */ PB4_PF_SD2_D0, PB5_PF_SD2_D1, PB6_PF_SD2_D2, PB7_PF_SD2_D3, PB8_PF_SD2_CMD, PB9_PF_SD2_CLK, + GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */ + /* display */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA24_PF_REV, + PA25_PF_CLS, + PA26_PF_PS, + PA27_PF_SPL_SPR, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + /* + * it seems the data line misses a pullup, so we must enable + * the internal pullup as a local workaround + */ + PD17_PF_I2C_DATA | GPIO_PUEN, + PD18_PF_I2C_CLK, + /* Camera */ + PB10_PF_CSI_D0, + PB11_PF_CSI_D1, + PB12_PF_CSI_D2, + PB13_PF_CSI_D3, + PB14_PF_CSI_D4, + PB15_PF_CSI_MCLK, + PB16_PF_CSI_PIXCLK, + PB17_PF_CSI_D5, + PB18_PF_CSI_D6, + PB19_PF_CSI_D7, + PB20_PF_CSI_VSYNC, + PB21_PF_CSI_HSYNC, }; +static int pcm970_sdhc2_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_PORTC + 28); +} + static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data) { int ret; - ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins, - ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2"); - if(ret) - return ret; - - ret = request_irq(IRQ_GPIOC(29), detect_irq, 0, + ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); if (ret) - goto out_release_gpio; - - set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING); + return ret; ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro"); - if (ret) - goto out_release_gpio; + if (ret) { + free_irq(IRQ_GPIOC(29), data); + return ret; + } - mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN); gpio_direction_input(GPIO_PORTC + 28); return 0; - -out_release_gpio: - mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins, - ARRAY_SIZE(pcm970_sdhc2_pins)); - return ret; } static void pcm970_sdhc2_exit(struct device *dev, void *data) { free_irq(IRQ_GPIOC(29), data); gpio_free(GPIO_PORTC + 28); - mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins, - ARRAY_SIZE(pcm970_sdhc2_pins)); } static struct imxmmc_platform_data sdhc_pdata = { @@ -89,29 +125,6 @@ static struct imxmmc_platform_data sdhc_pdata = { .exit = pcm970_sdhc2_exit, }; -static int mxc_fb_pins[] = { - PA5_PF_LSCLK, PA6_PF_LD0, PA7_PF_LD1, PA8_PF_LD2, - PA9_PF_LD3, PA10_PF_LD4, PA11_PF_LD5, PA12_PF_LD6, - PA13_PF_LD7, PA14_PF_LD8, PA15_PF_LD9, PA16_PF_LD10, - PA17_PF_LD11, PA18_PF_LD12, PA19_PF_LD13, PA20_PF_LD14, - PA21_PF_LD15, PA22_PF_LD16, PA23_PF_LD17, PA24_PF_REV, - PA25_PF_CLS, PA26_PF_PS, PA27_PF_SPL_SPR, PA28_PF_HSYNC, - PA29_PF_VSYNC, PA30_PF_CONTRAST, PA31_PF_OE_ACD -}; - -static int pcm038_fb_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_fb_pins, - ARRAY_SIZE(mxc_fb_pins), "FB"); -} - -static int pcm038_fb_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins)); - - return 0; -} - /* * Connected is a portrait Sharp-QVGA display * of type: LQ035Q7DH06 @@ -144,9 +157,6 @@ static struct imx_fb_platform_data pcm038_fb_data = { .pwmr = 0x00A903FF, .lscr1 = 0x00120300, .dmacr = 0x00020010, - - .init = pcm038_fb_init, - .exit = pcm038_fb_exit, }; /* @@ -157,6 +167,9 @@ static struct imx_fb_platform_data pcm038_fb_data = { */ void __init pcm970_baseboard_init(void) { + mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins), + "PCM970"); + mxc_register_device(&mxc_fb_device, &pcm038_fb_data); mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); } diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 194b842..17a21a2 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -1,10 +1,12 @@ if ARCH_MX3 config ARCH_MX31 + select ARCH_HAS_RNGA bool config ARCH_MX35 bool + select ARCH_MXC_IOMUX_V3 comment "MX3 platforms:" @@ -37,7 +39,6 @@ config MACH_PCM037 config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" select ARCH_MX31 - default n help Include support for MX31 LITEKIT platform. This includes specific configurations for the board and its peripherals. @@ -45,7 +46,6 @@ config MACH_MX31LITE config MACH_MX31_3DS bool "Support MX31PDK (3DS)" select ARCH_MX31 - default n help Include support for MX31PDK (3DS) platform. This includes specific configurations for the board and its peripherals. @@ -53,17 +53,43 @@ config MACH_MX31_3DS config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select ARCH_MX31 - default n help Include support for mx31moboard platform. This includes specific configurations for the board and its peripherals. +config MACH_MX31LILLY + bool "Support MX31 LILLY-1131 platforms (INCO startec)" + select ARCH_MX31 + help + Include support for mx31 based LILLY1131 modules. This includes + specific configurations for the board and its peripherals. + config MACH_QONG bool "Support Dave/DENX QongEVB-LITE platform" select ARCH_MX31 - default n help Include support for Dave/DENX QongEVB-LITE platform. This includes specific configurations for the board and its peripherals. +config MACH_PCM043 + bool "Support Phytec pcm043 (i.MX35) platforms" + select ARCH_MX35 + help + Include support for Phytec pcm043 platform. This includes + specific configurations for the board and its peripherals. + +config MACH_ARMADILLO5X0 + bool "Support Atmark Armadillo-500 Development Base Board" + select ARCH_MX31 + help + Include support for Atmark Armadillo-500 platform. This includes + specific configurations for the board and its peripherals. + +config MACH_MX35_3DS + bool "Support MX35PDK platform" + select ARCH_MX35 + default n + help + Include support for MX35PDK platform. This includes specific + configurations for the board and its peripherals. endif diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 272c8a9..0322696 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -8,9 +8,13 @@ obj-y := mm.o devices.o obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o obj-$(CONFIG_ARCH_MX35) += clock-imx35.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o +obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o obj-$(CONFIG_MACH_PCM037) += pcm037.o obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \ mx31moboard-marxbot.o obj-$(CONFIG_MACH_QONG) += qong.o +obj-$(CONFIG_MACH_PCM043) += pcm043.o +obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o +obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c new file mode 100644 index 0000000..54118109 --- /dev/null +++ b/arch/arm/mach-mx3/armadillo5x0.c @@ -0,0 +1,295 @@ +/* + * armadillo5x0.c + * + * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> + * updates in http://alberdroid.blogspot.com/ + * + * Based on Atmark Techno, Inc. armadillo 500 BSP 2008 + * Based on mx31ads.c and pcm037.c Great Work! + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/memory.h> +#include <asm/mach/map.h> + +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx3.h> +#include <mach/board-armadillo5x0.h> +#include <mach/mmc.h> +#include <mach/ipu.h> +#include <mach/mx3fb.h> + +#include "devices.h" + +static int armadillo5x0_pins[] = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* UART2 */ + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + /* LAN9118_IRQ */ + IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + /* Framebuffer */ + MX31_PIN_LD0__LD0, + MX31_PIN_LD1__LD1, + MX31_PIN_LD2__LD2, + MX31_PIN_LD3__LD3, + MX31_PIN_LD4__LD4, + MX31_PIN_LD5__LD5, + MX31_PIN_LD6__LD6, + MX31_PIN_LD7__LD7, + MX31_PIN_LD8__LD8, + MX31_PIN_LD9__LD9, + MX31_PIN_LD10__LD10, + MX31_PIN_LD11__LD11, + MX31_PIN_LD12__LD12, + MX31_PIN_LD13__LD13, + MX31_PIN_LD14__LD14, + MX31_PIN_LD15__LD15, + MX31_PIN_LD16__LD16, + MX31_PIN_LD17__LD17, + MX31_PIN_VSYNC3__VSYNC3, + MX31_PIN_HSYNC__HSYNC, + MX31_PIN_FPSHIFT__FPSHIFT, + MX31_PIN_DRDY0__DRDY0, + IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/ + +}; + +/* + * FB support + */ +static const struct fb_videomode fb_modedb[] = { + { /* 640x480 @ 60 Hz */ + .name = "CRT-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, + .left_margin = 35, + .right_margin = 115, + .upper_margin = 43, + .lower_margin = 1, + .hsync_len = 10, + .vsync_len = 1, + .sync = FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, {/* 800x600 @ 56 Hz */ + .name = "CRT-SVGA", + .refresh = 56, + .xres = 800, + .yres = 600, + .pixclock = 30000, + .left_margin = 30, + .right_margin = 108, + .upper_margin = 13, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 1, + .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT | + FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .dma_dev = &mx3_ipu.dev, + .name = "CRT-VGA", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +/* + * SDHC 1 + * MMC support + */ +static int armadillo5x0_sdhc1_get_ro(struct device *dev) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); +} + +static int armadillo5x0_sdhc1_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int ret; + int gpio_det, gpio_wp; + + gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK); + gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B); + + ret = gpio_request(gpio_det, "sdhc-card-detect"); + if (ret) + return ret; + + gpio_direction_input(gpio_det); + + ret = gpio_request(gpio_wp, "sdhc-write-protect"); + if (ret) + goto err_gpio_free; + + gpio_direction_input(gpio_wp); + + /* When supported the trigger type have to be BOTH */ + ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "sdhc-detect", data); + + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(gpio_wp); + +err_gpio_free: + gpio_free(gpio_det); + + return ret; + +} + +static void armadillo5x0_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data); + gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)); + gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); +} + +static struct imxmmc_platform_data sdhc_pdata = { + .get_ro = armadillo5x0_sdhc1_get_ro, + .init = armadillo5x0_sdhc1_init, + .exit = armadillo5x0_sdhc1_exit, +}; + +/* + * SMSC 9118 + * Network support + */ +static struct resource armadillo5x0_smc911x_resources[] = { + { + .start = CS3_BASE_ADDR, + .end = CS3_BASE_ADDR + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config smsc911x_info = { + .flags = SMSC911X_USE_32BIT, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, +}; + +static struct platform_device armadillo5x0_smc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(armadillo5x0_smc911x_resources), + .resource = armadillo5x0_smc911x_resources, + .dev = { + .platform_data = &smsc911x_info, + }, +}; + +/* UART device data */ +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *devices[] __initdata = { + &armadillo5x0_smc911x_device, +}; + +/* + * Perform board specific initializations + */ +static void __init armadillo5x0_init(void) +{ + mxc_iomux_setup_multiple_pins(armadillo5x0_pins, + ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + /* Register UART */ + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_uart_device1, &uart_pdata); + + /* SMSC9118 IRQ pin */ + gpio_direction_input(MX31_PIN_GPIO1_0); + + /* Register SDHC */ + mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); + + /* Register FB */ + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + mxc_register_device(&mx3_fb, &mx3fb_pdata); +} + +static void __init armadillo5x0_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +static struct sys_timer armadillo5x0_timer = { + .init = armadillo5x0_timer_init, +}; + +MACHINE_START(ARMADILLO5X0, "Armadillo-500") + /* Maintainer: Alberto Panizzo */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x00000100, + .map_io = mx31_map_io, + .init_irq = mxc_init_irq, + .timer = &armadillo5x0_timer, + .init_machine = armadillo5x0_init, +MACHINE_END diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 53a112d..0d76521 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -147,34 +147,16 @@ static struct arm_ahb_div clk_consumer[] = { { .arm = 0, .ahb = 0, .sel = 0}, }; -static struct arm_ahb_div clk_automotive[] = { - { .arm = 1, .ahb = 3, .sel = 0}, - { .arm = 1, .ahb = 2, .sel = 1}, - { .arm = 2, .ahb = 1, .sel = 1}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 1, .ahb = 6, .sel = 0}, - { .arm = 1, .ahb = 4, .sel = 1}, - { .arm = 2, .ahb = 2, .sel = 1}, - { .arm = 0, .ahb = 0, .sel = 0}, -}; - static unsigned long get_rate_arm(void) { unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); struct arm_ahb_div *aad; unsigned long fref = get_rate_mpll(); - if (pdr0 & 1) { - /* consumer path */ - aad = &clk_consumer[(pdr0 >> 16) & 0xf]; - if (aad->sel) - fref = fref * 2 / 3; - } else { - /* auto path */ - aad = &clk_automotive[(pdr0 >> 9) & 0x7]; - if (aad->sel) - fref = fref * 3 / 4; - } + aad = &clk_consumer[(pdr0 >> 16) & 0xf]; + if (aad->sel) + fref = fref * 2 / 3; + return fref / aad->arm; } @@ -184,12 +166,7 @@ static unsigned long get_rate_ahb(struct clk *clk) struct arm_ahb_div *aad; unsigned long fref = get_rate_mpll(); - if (pdr0 & 1) - /* consumer path */ - aad = &clk_consumer[(pdr0 >> 16) & 0xf]; - else - /* auto path */ - aad = &clk_automotive[(pdr0 >> 9) & 0x7]; + aad = &clk_consumer[(pdr0 >> 16) & 0xf]; return fref / aad->ahb; } @@ -430,7 +407,8 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk) _REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk) - _REGISTER_CLOCK(NULL, "ipu", ipu_clk) + _REGISTER_CLOCK("ipu-core", NULL, ipu_clk) + _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk) _REGISTER_CLOCK(NULL, "kpp", kpp_clk) _REGISTER_CLOCK(NULL, "mlb", mlb_clk) _REGISTER_CLOCK(NULL, "mshc", mshc_clk) @@ -462,8 +440,6 @@ int __init mx35_clocks_init() int i; unsigned int ll = 0; - mxc_set_cpu_type(MXC_CPU_MX35); - #ifdef CONFIG_DEBUG_LL_CONSOLE ll = (3 << 16); #endif diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index 9957a11..217d114 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -483,7 +483,7 @@ DEFINE_CLOCK(i2c3_clk, 2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk); DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk); DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk); DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk); -DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &ahb_clk); +DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk); DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk); DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk); DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk); @@ -566,13 +566,18 @@ int __init mx31_clocks_init(unsigned long fref) u32 reg; int i; - mxc_set_cpu_type(MXC_CPU_MX31); - ckih_rate = fref; for (i = 0; i < ARRAY_SIZE(lookups); i++) clkdev_add(&lookups[i]); + /* change the csi_clk parent if necessary */ + reg = __raw_readl(MXC_CCM_CCMR); + if (!(reg & MXC_CCM_CCMR_CSCS)) + if (clk_set_parent(&csi_clk, &usb_pll_clk)) + pr_err("%s: error changing csi_clk parent\n", __func__); + + /* Turn off all possible clocks */ __raw_writel((3 << 4), MXC_CCM_CGR0); __raw_writel(0, MXC_CCM_CGR1); @@ -581,6 +586,12 @@ int __init mx31_clocks_init(unsigned long fref) MX32, but still required to be set */ MXC_CCM_CGR2); + /* + * Before turning off usb_pll make sure ipg_per_clk is generated + * by ipg_clk and not usb_pll. + */ + __raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR); + usb_pll_disable(&usb_pll_clk); pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk)); diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 380be0c..d927edd 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -17,13 +17,17 @@ * Boston, MA 02110-1301, USA. */ +#include <linux/dma-mapping.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/serial.h> #include <linux/gpio.h> +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/irqs.h> +#include <mach/common.h> #include <mach/imx-uart.h> +#include <mach/mx3_camera.h> #include "devices.h" @@ -283,6 +287,21 @@ struct platform_device mxcsdhc_device1 = { .num_resources = ARRAY_SIZE(mxcsdhc1_resources), .resource = mxcsdhc1_resources, }; + +static struct resource rnga_resources[] = { + { + .start = RNGA_BASE_ADDR, + .end = RNGA_BASE_ADDR + 0x28, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device mxc_rnga_device = { + .name = "mxc_rnga", + .id = -1, + .num_resources = 1, + .resource = rnga_resources, +}; #endif /* CONFIG_ARCH_MX31 */ /* i.MX31 Image Processing Unit */ @@ -329,10 +348,54 @@ struct platform_device mx3_fb = { .num_resources = ARRAY_SIZE(fb_resources), .resource = fb_resources, .dev = { - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, }; +static struct resource camera_resources[] = { + { + .start = IPU_CTRL_BASE_ADDR + 0x60, + .end = IPU_CTRL_BASE_ADDR + 0x87, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device mx3_camera = { + .name = "mx3-camera", + .id = 0, + .num_resources = ARRAY_SIZE(camera_resources), + .resource = camera_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource otg_resources[] = { + { + .start = OTG_BASE_ADDR, + .end = OTG_BASE_ADDR + 0x1ff, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_USB3, + .end = MXC_INT_USB3, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 otg_dmamask = DMA_BIT_MASK(32); + +/* OTG gadget device */ +struct platform_device mxc_otg_udc_device = { + .name = "fsl-usb2-udc", + .id = -1, + .dev = { + .dma_mask = &otg_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = otg_resources, + .num_resources = ARRAY_SIZE(otg_resources), +}; + #ifdef CONFIG_ARCH_MX35 static struct resource mxc_fec_resources[] = { { @@ -359,6 +422,7 @@ static int mx3_devices_init(void) if (cpu_is_mx31()) { mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR; mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff; + mxc_register_device(&mxc_rnga_device, NULL); } if (cpu_is_mx35()) { mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR; diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 88c04b2..ffd494d 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -11,6 +11,10 @@ extern struct platform_device mxc_i2c_device1; extern struct platform_device mxc_i2c_device2; extern struct platform_device mx3_ipu; extern struct platform_device mx3_fb; +extern struct platform_device mx3_camera; extern struct platform_device mxc_fec_device; extern struct platform_device mxcsdhc_device0; extern struct platform_device mxcsdhc_device1; +extern struct platform_device mxc_otg_udc_device; +extern struct platform_device mxc_rnga_device; + diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c index 40ffc5a..c66ccbc 100644 --- a/arch/arm/mach-mx3/iomux.c +++ b/arch/arm/mach-mx3/iomux.c @@ -21,7 +21,6 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/kernel.h> #include <mach/hardware.h> #include <mach/gpio.h> @@ -94,15 +93,13 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) EXPORT_SYMBOL(mxc_iomux_set_pad); /* - * setups a single pin: + * allocs a single pin: * - reserves the pin so that it is not claimed by another driver * - setups the iomux according to the configuration - * - if the pin is configured as a GPIO, we claim it through kernel gpiolib */ -int mxc_iomux_setup_pin(const unsigned int pin, const char *label) +int mxc_iomux_alloc_pin(const unsigned int pin, const char *label) { unsigned pad = pin & IOMUX_PADNUM_MASK; - unsigned gpio; if (pad >= (PIN_MAX + 1)) { printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n", @@ -113,19 +110,13 @@ int mxc_iomux_setup_pin(const unsigned int pin, const char *label) if (test_and_set_bit(pad, mxc_pin_alloc_map)) { printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n", pad, label ? label : "?"); - return -EINVAL; + return -EBUSY; } mxc_iomux_mode(pin); - /* if we have a gpio, we can allocate it */ - gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT; - if (gpio < (GPIO_PORT_MAX + 1) * 32) - if (gpio_request(gpio, label)) - return -EINVAL; - return 0; } -EXPORT_SYMBOL(mxc_iomux_setup_pin); +EXPORT_SYMBOL(mxc_iomux_alloc_pin); int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, const char *label) @@ -135,7 +126,8 @@ int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, int ret = -EINVAL; for (i = 0; i < count; i++) { - if (mxc_iomux_setup_pin(*p, label)) + ret = mxc_iomux_alloc_pin(*p, label); + if (ret) goto setup_error; p++; } @@ -150,14 +142,9 @@ EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins); void mxc_iomux_release_pin(const unsigned int pin) { unsigned pad = pin & IOMUX_PADNUM_MASK; - unsigned gpio; if (pad < (PIN_MAX + 1)) clear_bit(pad, mxc_pin_alloc_map); - - gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT; - if (gpio < (GPIO_PORT_MAX + 1) * 32) - gpio_free(gpio); } EXPORT_SYMBOL(mxc_iomux_release_pin); diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index 9e1459c..1f5fdd4 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -72,8 +72,17 @@ static struct map_desc mxc_io_desc[] __initdata = { * system startup to create static physical to virtual memory mappings * for the IO modules. */ -void __init mxc_map_io(void) +void __init mx31_map_io(void) { + mxc_set_cpu_type(MXC_CPU_MX31); + + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} + +void __init mx35_map_io(void) +{ + mxc_set_cpu_type(MXC_CPU_MX35); + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index a6d6efe..30e2767 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -187,7 +187,7 @@ static void __init mx31ads_init_expio(void) /* * Configure INT line as GPIO input */ - mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); + mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); /* disable the interrupt and clear the status */ __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); @@ -511,7 +511,7 @@ static struct map_desc mx31ads_io_desc[] __initdata = { */ static void __init mx31ads_map_io(void) { - mxc_map_io(); + mx31_map_io(); iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc)); } diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c new file mode 100644 index 0000000..3b3a78f --- /dev/null +++ b/arch/arm/mach-mx3/mx31lilly-db.c @@ -0,0 +1,216 @@ +/* + * LILLY-1131 development board support + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * based on code for other MX31 boards, + * + * Copyright 2005-2007 Freescale Semiconductor + * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx3.h> +#include <mach/board-mx31lilly.h> +#include <mach/mmc.h> +#include <mach/mx3fb.h> +#include <mach/ipu.h> + +#include "devices.h" + +/* + * This file contains board-specific initialization routines for the + * LILLY-1131 development board. If you design an own baseboard for the + * module, use this file as base for support code. + */ + +static unsigned int lilly_db_board_pins[] __initdata = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + MX31_PIN_CSPI3_MOSI__RXD3, + MX31_PIN_CSPI3_MISO__TXD3, + MX31_PIN_CSPI3_SCLK__RTS3, + MX31_PIN_CSPI3_SPI_RDY__CTS3, + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + MX31_PIN_LD0__LD0, + MX31_PIN_LD1__LD1, + MX31_PIN_LD2__LD2, + MX31_PIN_LD3__LD3, + MX31_PIN_LD4__LD4, + MX31_PIN_LD5__LD5, + MX31_PIN_LD6__LD6, + MX31_PIN_LD7__LD7, + MX31_PIN_LD8__LD8, + MX31_PIN_LD9__LD9, + MX31_PIN_LD10__LD10, + MX31_PIN_LD11__LD11, + MX31_PIN_LD12__LD12, + MX31_PIN_LD13__LD13, + MX31_PIN_LD14__LD14, + MX31_PIN_LD15__LD15, + MX31_PIN_LD16__LD16, + MX31_PIN_LD17__LD17, + MX31_PIN_VSYNC3__VSYNC3, + MX31_PIN_HSYNC__HSYNC, + MX31_PIN_FPSHIFT__FPSHIFT, + MX31_PIN_DRDY0__DRDY0, + MX31_PIN_CONTRAST__CONTRAST, +}; + +/* UART */ +static struct imxuart_platform_data uart_pdata __initdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* MMC support */ + +static int mxc_mmc1_get_ro(struct device *dev) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0)); +} + +static int gpio_det, gpio_wp; + +static int mxc_mmc1_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int ret; + + gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1); + gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0); + + ret = gpio_request(gpio_det, "MMC detect"); + if (ret) + return ret; + + ret = gpio_request(gpio_wp, "MMC w/p"); + if (ret) + goto exit_free_det; + + gpio_direction_input(gpio_det); + gpio_direction_input(gpio_wp); + + ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "MMC detect", data); + if (ret) + goto exit_free_wp; + + return 0; + +exit_free_wp: + gpio_free(gpio_wp); + +exit_free_det: + gpio_free(gpio_det); + + return ret; +} + +static void mxc_mmc1_exit(struct device *dev, void *data) +{ + gpio_free(gpio_det); + gpio_free(gpio_wp); + free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data); +} + +static struct imxmmc_platform_data mmc_pdata = { + .get_ro = mxc_mmc1_get_ro, + .init = mxc_mmc1_init, + .exit = mxc_mmc1_exit, +}; + +/* Framebuffer support */ +static struct ipu_platform_data ipu_data __initdata = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static const struct fb_videomode fb_modedb = { + /* 640x480 TFT panel (IPS-056T) */ + .name = "CRT-VGA", + .refresh = 64, + .xres = 640, + .yres = 480, + .pixclock = 30000, + .left_margin = 200, + .right_margin = 2, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 3, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, +}; + +static struct mx3fb_platform_data fb_pdata __initdata = { + .dma_dev = &mx3_ipu.dev, + .name = "CRT-VGA", + .mode = &fb_modedb, + .num_modes = 1, +}; + +#define LCD_VCC_EN_GPIO (7) + +static void __init mx31lilly_init_fb(void) +{ + if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) { + printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n"); + return; + } + + mxc_register_device(&mx3_ipu, &ipu_data); + mxc_register_device(&mx3_fb, &fb_pdata); + gpio_direction_output(LCD_VCC_EN_GPIO, 1); +} + +void __init mx31lilly_db_init(void) +{ + mxc_iomux_setup_multiple_pins(lilly_db_board_pins, + ARRAY_SIZE(lilly_db_board_pins), + "development board pins"); + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_uart_device1, &uart_pdata); + mxc_register_device(&mxc_uart_device2, &uart_pdata); + mxc_register_device(&mxcsdhc_device0, &mmc_pdata); + mx31lilly_init_fb(); +} + diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c new file mode 100644 index 0000000..6ab2f16 --- /dev/null +++ b/arch/arm/mach-mx3/mx31lilly.c @@ -0,0 +1,155 @@ +/* + * LILLY-1131 module support + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * based on code for other MX31 boards, + * + * Copyright 2005-2007 Freescale Semiconductor + * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/smsc911x.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/iomux-mx3.h> +#include <mach/board-mx31lilly.h> + +#include "devices.h" + +/* + * This file contains module-specific initialization routines for LILLY-1131. + * Initialization of peripherals found on the baseboard is implemented in the + * appropriate baseboard support code. + */ + +/* SMSC ethernet support */ + +static struct resource smsc91x_resources[] = { + { + .start = CS4_BASE_ADDR, + .end = CS4_BASE_ADDR + 0xffff, + .flags = IORESOURCE_MEM, + }, + { + .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, + } +}; + +static struct smsc911x_platform_config smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT | + SMSC911X_SAVE_MAC_ADDRESS | + SMSC911X_FORCE_INTERNAL_PHY, +}; + +static struct platform_device smsc91x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc91x_resources), + .resource = smsc91x_resources, + .dev = { + .platform_data = &smsc911x_config, + } +}; + +/* NOR flash */ +static struct physmap_flash_data nor_flash_data = { + .width = 2, +}; + +static struct resource nor_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device physmap_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &nor_flash_data, + }, + .resource = &nor_flash_resource, + .num_resources = 1, +}; + +static struct platform_device *devices[] __initdata = { + &smsc91x_device, + &physmap_flash_device, + &mxc_i2c_device1, +}; + +static int mx31lilly_baseboard; +core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); + +static void __init mx31lilly_board_init(void) +{ + switch (mx31lilly_baseboard) { + case MX31LILLY_NOBOARD: + break; + case MX31LILLY_DB: + mx31lilly_db_init(); + break; + default: + printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n", + mx31lilly_baseboard); + } + + mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA"); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init mx31lilly_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +static struct sys_timer mx31lilly_timer = { + .init = mx31lilly_timer_init, +}; + +MACHINE_START(LILLY1131, "INCO startec LILLY-1131") + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx31lilly_board_init, + .timer = &mx31lilly_timer, +MACHINE_END + diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c index 894d98c..86fe70f 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mx31lite.c @@ -22,6 +22,9 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/memory.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -32,11 +35,64 @@ #include <asm/page.h> #include <asm/setup.h> #include <mach/board-mx31lite.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx3.h> +#include <mach/irqs.h> +#include <mach/mxc_nand.h> +#include "devices.h" /* * This file contains the board-specific initialization routines. */ +static unsigned int mx31lite_pins[] = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* LAN9117 IRQ pin */ + IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct mxc_nand_platform_data mx31lite_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT, +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .start = CS4_BASE_ADDR, + .end = CS4_BASE_ADDR + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IOMUX_TO_IRQ(MX31_PIN_SFS6), + .end = IOMUX_TO_IRQ(MX31_PIN_SFS6), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + /* * This structure defines the MX31 memory map. */ @@ -59,7 +115,7 @@ static struct map_desc mx31lite_io_desc[] __initdata = { */ void __init mx31lite_map_io(void) { - mxc_map_io(); + mx31_map_io(); iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc)); } @@ -68,6 +124,22 @@ void __init mx31lite_map_io(void) */ static void __init mxc_board_init(void) { + int ret; + + mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins), + "mx31lite"); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info); + + /* SMSC9117 IRQ pin */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); + if (ret) + pr_warning("could not get LAN irq gpio\n"); + else { + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6)); + platform_device_register(&smsc911x_device); + } } static void __init mx31lite_timer_init(void) diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index d080b4a..4704405 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -16,33 +16,142 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/types.h> +#include <linux/fsl_devices.h> +#include <linux/gpio.h> #include <linux/init.h> - +#include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/types.h> -#include <mach/hardware.h> #include <mach/common.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> +#include <mach/hardware.h> +#include <mach/mmc.h> #include "devices.h" +static unsigned int devboard_pins[] = { + /* UART1 */ + MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, + /* SDHC2 */ + MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, + MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, + MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, + MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, + /* USB OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, + MX31_PIN_USB_OC__GPIO1_30, +}; + static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static int mxc_uart1_pins[] = { - MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, +#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) +#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) + +static int devboard_sdhc2_get_ro(struct device *dev) +{ + return gpio_get_value(SDHC2_WP); +} + +static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC2_CD, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC2_CD); + + ret = gpio_request(SDHC2_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC2_WP); + + ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "sdhc2-card-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(SDHC2_WP); +err_gpio_free: + gpio_free(SDHC2_CD); + + return ret; +} + +static void devboard_sdhc2_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC2_CD), data); + gpio_free(SDHC2_WP); + gpio_free(SDHC2_CD); +} + +static struct imxmmc_platform_data sdhc2_pdata = { + .get_ro = devboard_sdhc2_get_ro, + .init = devboard_sdhc2_init, + .exit = devboard_sdhc2_exit, +}; + +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, }; +#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST) +#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) + +static void devboard_usbotg_init(void) +{ + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG); + + gpio_request(OTG_EN_B, "usb-udc-en"); + gpio_direction_output(OTG_EN_B, 0); +} + /* * system init for baseboard usage. Will be called by mx31moboard init. */ void __init mx31moboard_devboard_init(void) { printk(KERN_INFO "Initializing mx31devboard peripherals\n"); - mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1"); + + mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins), + "devboard"); + mxc_register_device(&mxc_uart_device1, &uart_pdata); + + mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); + + devboard_usbotg_init(); + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 9ef9566..641c3d6 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -16,22 +16,144 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/types.h> +#include <linux/fsl_devices.h> +#include <linux/gpio.h> #include <linux/init.h> - +#include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/types.h> -#include <mach/hardware.h> #include <mach/common.h> +#include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> +#include <mach/mmc.h> #include "devices.h" +static unsigned int marxbot_pins[] = { + /* SDHC2 */ + MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, + MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, + MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, + MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, + /* CSI */ + MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5, + MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7, + MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9, + MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11, + MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13, + MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15, + MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK, + MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC, + MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1, + MX31_PIN_TXD2__GPIO1_28, + /* USB OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, + MX31_PIN_USB_OC__GPIO1_30, +}; + +#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) +#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) + +static int marxbot_sdhc2_get_ro(struct device *dev) +{ + return gpio_get_value(SDHC2_WP); +} + +static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC2_CD, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC2_CD); + + ret = gpio_request(SDHC2_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC2_WP); + + ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "sdhc2-card-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(SDHC2_WP); +err_gpio_free: + gpio_free(SDHC2_CD); + + return ret; +} + +static void marxbot_sdhc2_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC2_CD), data); + gpio_free(SDHC2_WP); + gpio_free(SDHC2_CD); +} + +static struct imxmmc_platform_data sdhc2_pdata = { + .get_ro = marxbot_sdhc2_get_ro, + .init = marxbot_sdhc2_init, + .exit = marxbot_sdhc2_exit, +}; + +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST) +#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) + +static void marxbot_usbotg_init(void) +{ + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG); + + gpio_request(OTG_EN_B, "usb-udc-en"); + gpio_direction_output(OTG_EN_B, 0); +} + /* * system init for baseboard usage. Will be called by mx31moboard init. */ void __init mx31moboard_marxbot_init(void) { printk(KERN_INFO "Initializing mx31marxbot peripherals\n"); + + mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins), + "marxbot"); + + mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); + + marxbot_usbotg_init(); + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index 34c2a1b9..a17f2e4 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -16,26 +16,47 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> - -#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/memory.h> #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> -#include <linux/memory.h> +#include <linux/platform_device.h> +#include <linux/types.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> +#include <mach/board-mx31moboard.h> #include <mach/common.h> +#include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> -#include <mach/board-mx31moboard.h> +#include <mach/i2c.h> +#include <mach/mmc.h> #include "devices.h" +static unsigned int moboard_pins[] = { + /* UART0 */ + MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, + /* UART4 */ + MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5, + MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5, + /* I2C0 */ + MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL, + /* I2C1 */ + MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL, + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD, + MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27, +}; + static struct physmap_flash_data mx31moboard_flash_data = { .width = 2, }; @@ -60,17 +81,69 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct platform_device *devices[] __initdata = { - &mx31moboard_flash, +static struct imxi2c_platform_data moboard_i2c0_pdata = { + .bitrate = 400000, }; -static int mxc_uart0_pins[] = { - MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, +static struct imxi2c_platform_data moboard_i2c1_pdata = { + .bitrate = 100000, }; -static int mxc_uart4_pins[] = { - MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5, - MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5, + +#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0) +#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1) + +static int moboard_sdhc1_get_ro(struct device *dev) +{ + return gpio_get_value(SDHC1_WP); +} + +static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC1_CD, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC1_CD); + + ret = gpio_request(SDHC1_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC1_WP); + + ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "sdhc1-card-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(SDHC1_WP); +err_gpio_free: + gpio_free(SDHC1_CD); + + return ret; +} + +static void moboard_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC1_CD), data); + gpio_free(SDHC1_WP); + gpio_free(SDHC1_CD); +} + +static struct imxmmc_platform_data sdhc1_pdata = { + .get_ro = moboard_sdhc1_get_ro, + .init = moboard_sdhc1_init, + .exit = moboard_sdhc1_exit, +}; + +static struct platform_device *devices[] __initdata = { + &mx31moboard_flash, }; static int mx31moboard_baseboard; @@ -81,14 +154,19 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); */ static void __init mxc_board_init(void) { + mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), + "moboard"); + platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0"); mxc_register_device(&mxc_uart_device0, &uart_pdata); - - mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4"); mxc_register_device(&mxc_uart_device4, &uart_pdata); + mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata); + mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata); + + mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata); + switch (mx31moboard_baseboard) { case MX31NOBOARD: break; @@ -99,7 +177,8 @@ static void __init mxc_board_init(void) mx31moboard_marxbot_init(); break; default: - printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard); + printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", + mx31moboard_baseboard); } } @@ -117,7 +196,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &mx31moboard_timer, diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c index bc63f17..c19838d 100644 --- a/arch/arm/mach-mx3/mx31pdk.c +++ b/arch/arm/mach-mx3/mx31pdk.c @@ -20,6 +20,9 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> +#include <linux/platform_device.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -41,21 +44,192 @@ * @ingroup System */ +static int mx31pdk_pins[] = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), +}; + static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static int uart_pins[] = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1 +/* + * Support for the SMSC9217 on the Debug board. + */ + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct resource smsc911x_resources[] = { + { + .start = LAN9217_BASE_ADDR, + .end = LAN9217_BASE_ADDR + 0xff, + .flags = IORESOURCE_MEM, + }, { + .start = EXPIO_INT_ENET, + .end = EXPIO_INT_ENET, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, }; -static inline void mxc_init_imx_uart(void) +/* + * Routines for the CPLD on the debug board. It contains a CPLD handling + * LEDs, switches, interrupts for Ethernet. + */ + +static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc) { - mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + uint32_t imr_val; + uint32_t int_valid; + uint32_t expio_irq; + + imr_val = __raw_readw(CPLD_INT_MASK_REG); + int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val; + + expio_irq = MXC_EXP_IO_BASE; + for (; int_valid != 0; int_valid >>= 1, expio_irq++) { + if ((int_valid & 1) == 0) + continue; + generic_handle_irq(expio_irq); + } +} + +/* + * Disable an expio pin's interrupt by setting the bit in the imr. + * @param irq an expio virtual irq number + */ +static void expio_mask_irq(uint32_t irq) +{ + uint16_t reg; + uint32_t expio = MXC_IRQ_TO_EXPIO(irq); + + /* mask the interrupt */ + reg = __raw_readw(CPLD_INT_MASK_REG); + reg |= 1 << expio; + __raw_writew(reg, CPLD_INT_MASK_REG); +} + +/* + * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr. + * @param irq an expanded io virtual irq number + */ +static void expio_ack_irq(uint32_t irq) +{ + uint32_t expio = MXC_IRQ_TO_EXPIO(irq); + + /* clear the interrupt status */ + __raw_writew(1 << expio, CPLD_INT_RESET_REG); + __raw_writew(0, CPLD_INT_RESET_REG); + /* mask the interrupt */ + expio_mask_irq(irq); +} + +/* + * Enable a expio pin's interrupt by clearing the bit in the imr. + * @param irq a expio virtual irq number + */ +static void expio_unmask_irq(uint32_t irq) +{ + uint16_t reg; + uint32_t expio = MXC_IRQ_TO_EXPIO(irq); + + /* unmask the interrupt */ + reg = __raw_readw(CPLD_INT_MASK_REG); + reg &= ~(1 << expio); + __raw_writew(reg, CPLD_INT_MASK_REG); +} + +static struct irq_chip expio_irq_chip = { + .ack = expio_ack_irq, + .mask = expio_mask_irq, + .unmask = expio_unmask_irq, +}; + +static int __init mx31pdk_init_expio(void) +{ + int i; + int ret; + + /* Check if there's a debug board connected */ + if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) || + (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) || + (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) { + /* No Debug board found */ + return -ENODEV; + } + + pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n", + __raw_readw(CPLD_CODE_VER_REG)); + + /* + * Configure INT line as GPIO input + */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq"); + if (ret) + pr_warning("could not get LAN irq gpio\n"); + else + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + + /* Disable the interrupts and clear the status */ + __raw_writew(0, CPLD_INT_MASK_REG); + __raw_writew(0xFFFF, CPLD_INT_RESET_REG); + __raw_writew(0, CPLD_INT_RESET_REG); + __raw_writew(0x1F, CPLD_INT_MASK_REG); + for (i = MXC_EXP_IO_BASE; + i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); + i++) { + set_irq_chip(i, &expio_irq_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler); + + return 0; +} + +/* + * This structure defines the MX31 memory map. + */ +static struct map_desc mx31pdk_io_desc[] __initdata = { + { + .virtual = SPBA0_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), + .length = SPBA0_SIZE, + .type = MT_DEVICE_NONSHARED, + }, { + .virtual = CS5_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(CS5_BASE_ADDR), + .length = CS5_SIZE, + .type = MT_DEVICE, + }, +}; + +/* + * Set up static virtual mappings. + */ +static void __init mx31pdk_map_io(void) +{ + mx31_map_io(); + iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc)); } /*! @@ -63,7 +237,13 @@ static inline void mxc_init_imx_uart(void) */ static void __init mxc_board_init(void) { - mxc_init_imx_uart(); + mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins), + "mx31pdk"); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + + if (!mx31pdk_init_expio()) + platform_device_register(&smsc911x_device); } static void __init mx31pdk_timer_init(void) @@ -84,7 +264,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31pdk_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &mx31pdk_timer, diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c new file mode 100644 index 0000000..6d15374 --- /dev/null +++ b/arch/arm/mach-mx3/mx35pdk.c @@ -0,0 +1,104 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/memory.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx35.h> + +#include "devices.h" + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *devices[] __initdata = { + &mxc_fec_device, +}; + +static struct pad_desc mx35pdk_pads[] = { + /* UART1 */ + MX35_PAD_CTS1__UART1_CTS, + MX35_PAD_RTS1__UART1_RTS, + MX35_PAD_TXD1__UART1_TXD_MUX, + MX35_PAD_RXD1__UART1_RXD_MUX, + /* FEC */ + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, +}; + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); +} + +static void __init mx35pdk_timer_init(void) +{ + mx35_clocks_init(); +} + +struct sys_timer mx35pdk_timer = { + .init = mx35pdk_timer_init, +}; + +MACHINE_START(MX35_3DS, "Freescale MX35PDK") + /* Maintainer: Freescale Semiconductor, Inc */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx35_map_io, + .init_irq = mxc_init_irq, + .init_machine = mxc_board_init, + .timer = &mx35pdk_timer, +MACHINE_END diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index b5227d8..c6f61a1 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -28,6 +28,10 @@ #include <linux/interrupt.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> +#include <linux/delay.h> +#include <linux/spi/spi.h> +#include <linux/irq.h> +#include <linux/fsl_devices.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -37,7 +41,9 @@ #include <mach/common.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> +#include <mach/ipu.h> #include <mach/board-pcm037.h> +#include <mach/mx3fb.h> #include <mach/mxc_nand.h> #include <mach/mmc.h> #ifdef CONFIG_I2C_IMX @@ -46,6 +52,76 @@ #include "devices.h" +static unsigned int pcm037_pins[] = { + /* I2C */ + MX31_PIN_CSPI2_MOSI__SCL, + MX31_PIN_CSPI2_MISO__SDA, + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */ + IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */ + /* SPI1 */ + MX31_PIN_CSPI1_MOSI__MOSI, + MX31_PIN_CSPI1_MISO__MISO, + MX31_PIN_CSPI1_SCLK__SCLK, + MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI1_SS0__SS0, + MX31_PIN_CSPI1_SS1__SS1, + MX31_PIN_CSPI1_SS2__SS2, + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* UART2 */ + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + /* UART3 */ + MX31_PIN_CSPI3_MOSI__RXD3, + MX31_PIN_CSPI3_MISO__TXD3, + MX31_PIN_CSPI3_SCLK__RTS3, + MX31_PIN_CSPI3_SPI_RDY__CTS3, + /* LAN9217 irq pin */ + IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), + /* Onewire */ + MX31_PIN_BATT_LINE__OWIRE, + /* Framebuffer */ + MX31_PIN_LD0__LD0, + MX31_PIN_LD1__LD1, + MX31_PIN_LD2__LD2, + MX31_PIN_LD3__LD3, + MX31_PIN_LD4__LD4, + MX31_PIN_LD5__LD5, + MX31_PIN_LD6__LD6, + MX31_PIN_LD7__LD7, + MX31_PIN_LD8__LD8, + MX31_PIN_LD9__LD9, + MX31_PIN_LD10__LD10, + MX31_PIN_LD11__LD11, + MX31_PIN_LD12__LD12, + MX31_PIN_LD13__LD13, + MX31_PIN_LD14__LD14, + MX31_PIN_LD15__LD15, + MX31_PIN_LD16__LD16, + MX31_PIN_LD17__LD17, + MX31_PIN_VSYNC3__VSYNC3, + MX31_PIN_HSYNC__HSYNC, + MX31_PIN_FPSHIFT__FPSHIFT, + MX31_PIN_DRDY0__DRDY0, + MX31_PIN_D3_REV__D3_REV, + MX31_PIN_CONTRAST__CONTRAST, + MX31_PIN_D3_SPL__D3_SPL, + MX31_PIN_D3_CLS__D3_CLS, + MX31_PIN_LCS0__GPI03_23, +}; + static struct physmap_flash_data pcm037_flash_data = { .width = 2, }; @@ -56,6 +132,54 @@ static struct resource pcm037_flash_resource = { .flags = IORESOURCE_MEM, }; +static int usbotg_pins[] = { + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, + MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, + MX31_PIN_USBOTG_STP__USBOTG_STP, +}; + +/* USB OTG HS port */ +static int __init gpio_usbotg_hs_activate(void) +{ + int ret = mxc_iomux_setup_multiple_pins(usbotg_pins, + ARRAY_SIZE(usbotg_pins), "usbotg"); + + if (ret < 0) { + printk(KERN_ERR "Cannot set up OTG pins\n"); + return ret; + } + + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + + return 0; +} + +/* OTG config */ +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + static struct platform_device pcm037_flash = { .name = "physmap-flash", .id = 0, @@ -127,26 +251,8 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = { }; #ifdef CONFIG_I2C_IMX -static int i2c_1_pins[] = { - MX31_PIN_CSPI2_MOSI__SCL, - MX31_PIN_CSPI2_MISO__SDA, -}; - -static int pcm037_i2c_1_init(struct device *dev) -{ - return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins), - "i2c-1"); -} - -static void pcm037_i2c_1_exit(struct device *dev) -{ - mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins)); -} - static struct imxi2c_platform_data pcm037_i2c_1_data = { .bitrate = 100000, - .init = pcm037_i2c_1_init, - .exit = pcm037_i2c_1_exit, }; static struct at24_platform_data board_eeprom = { @@ -166,48 +272,119 @@ static struct i2c_board_info pcm037_i2c_devices[] = { }; #endif -static int sdhc1_pins[] = { - MX31_PIN_SD1_DATA3__SD1_DATA3, - MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA1__SD1_DATA1, - MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_CLK__SD1_CLK, - MX31_PIN_SD1_CMD__SD1_CMD, -}; +/* Not connected by default */ +#ifdef PCM970_SDHC_RW_SWITCH +static int pcm970_sdhc1_get_ro(struct device *dev) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6)); +} +#endif + +#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6) +#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6) -static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data) +static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) { - return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins), - "sdhc-1"); + int ret; + + ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC1_GPIO_DET); + +#ifdef PCM970_SDHC_RW_SWITCH + ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC1_GPIO_WP); +#endif + + ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "sdhc-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: +#ifdef PCM970_SDHC_RW_SWITCH + gpio_free(SDHC1_GPIO_WP); +err_gpio_free: +#endif + gpio_free(SDHC1_GPIO_DET); + + return ret; } static void pcm970_sdhc1_exit(struct device *dev, void *data) { - mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins)); + free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data); + gpio_free(SDHC1_GPIO_DET); + gpio_free(SDHC1_GPIO_WP); } -/* No card and rw detection at the moment */ static struct imxmmc_platform_data sdhc_pdata = { +#ifdef PCM970_SDHC_RW_SWITCH + .get_ro = pcm970_sdhc1_get_ro, +#endif .init = pcm970_sdhc1_init, .exit = pcm970_sdhc1_exit, }; static struct platform_device *devices[] __initdata = { &pcm037_flash, - &pcm037_eth, &pcm037_sram_device, }; -static int uart0_pins[] = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1 +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, }; -static int uart2_pins[] = { - MX31_PIN_CSPI3_MOSI__RXD3, - MX31_PIN_CSPI3_MISO__TXD3 +static const struct fb_videomode fb_modedb[] = { + { + /* 240x320 @ 60 Hz Sharp */ + .name = "Sharp-LQ035Q7DH06-QVGA", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | + FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 240x320 @ 60 Hz */ + .name = "TX090", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 38255, + .left_margin = 144, + .right_margin = 0, + .upper_margin = 7, + .lower_margin = 40, + .hsync_len = 96, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .dma_dev = &mx3_ipu.dev, + .name = "Sharp-LQ035Q7DH06-QVGA", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), }; /* @@ -215,21 +392,28 @@ static int uart2_pins[] = { */ static void __init mxc_board_init(void) { + int ret; + + mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), + "pcm037"); + platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0"); mxc_register_device(&mxc_uart_device0, &uart_pdata); - - mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2"); + mxc_register_device(&mxc_uart_device1, &uart_pdata); mxc_register_device(&mxc_uart_device2, &uart_pdata); - mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire"); mxc_register_device(&mxc_w1_master_device, NULL); /* LAN9217 IRQ pin */ - if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), - "pcm037-eth")) + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); + if (ret) + pr_warning("could not get LAN irq gpio\n"); + else { gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + platform_device_register(&pcm037_eth); + } + #ifdef CONFIG_I2C_IMX i2c_register_board_info(1, pcm037_i2c_devices, @@ -239,6 +423,10 @@ static void __init mxc_board_init(void) #endif mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + mxc_register_device(&mx3_fb, &mx3fb_pdata); + if (!gpio_usbotg_hs_activate()) + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } static void __init pcm037_timer_init(void) @@ -255,7 +443,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &pcm037_timer, diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c new file mode 100644 index 0000000..8d27c32 --- /dev/null +++ b/arch/arm/mach-mx3/pcm043.c @@ -0,0 +1,252 @@ +/* + * Copyright (C) 2009 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> + +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/plat-ram.h> +#include <linux/memory.h> +#include <linux/gpio.h> +#include <linux/smc911x.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE +#include <mach/i2c.h> +#endif +#include <mach/iomux-mx35.h> +#include <mach/ipu.h> +#include <mach/mx3fb.h> + +#include "devices.h" + +static const struct fb_videomode fb_modedb[] = { + { + /* 240x320 @ 60 Hz */ + .name = "Sharp-LQ035Q7", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 240x320 @ 60 Hz */ + .name = "TX090", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 38255, + .left_margin = 144, + .right_margin = 0, + .upper_margin = 7, + .lower_margin = 40, + .hsync_len = 96, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .dma_dev = &mx3_ipu.dev, + .name = "Sharp-LQ035Q7", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +static struct physmap_flash_data pcm043_flash_data = { + .width = 2, +}; + +static struct resource pcm043_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pcm043_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &pcm043_flash_data, + }, + .resource = &pcm043_flash_resource, + .num_resources = 1, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE +static struct imxi2c_platform_data pcm043_i2c_1_data = { + .bitrate = 50000, +}; + +static struct at24_platform_data board_eeprom = { + .byte_len = 4096, + .page_size = 32, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info pcm043_i2c_devices[] = { + { + I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ + .platform_data = &board_eeprom, + }, { + I2C_BOARD_INFO("rtc-pcf8563", 0x51), + .type = "pcf8563", + } +}; +#endif + +static struct platform_device *devices[] __initdata = { + &pcm043_flash, + &mxc_fec_device, +}; + +static struct pad_desc pcm043_pads[] = { + /* UART1 */ + MX35_PAD_CTS1__UART1_CTS, + MX35_PAD_RTS1__UART1_RTS, + MX35_PAD_TXD1__UART1_TXD_MUX, + MX35_PAD_RXD1__UART1_RXD_MUX, + /* UART2 */ + MX35_PAD_CTS2__UART2_CTS, + MX35_PAD_RTS2__UART2_RTS, + MX35_PAD_TXD2__UART2_TXD_MUX, + MX35_PAD_RXD2__UART2_RXD_MUX, + /* FEC */ + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + /* I2C1 */ + MX35_PAD_I2C1_CLK__I2C1_SCL, + MX35_PAD_I2C1_DAT__I2C1_SDA, + /* Display */ + MX35_PAD_LD0__IPU_DISPB_DAT_0, + MX35_PAD_LD1__IPU_DISPB_DAT_1, + MX35_PAD_LD2__IPU_DISPB_DAT_2, + MX35_PAD_LD3__IPU_DISPB_DAT_3, + MX35_PAD_LD4__IPU_DISPB_DAT_4, + MX35_PAD_LD5__IPU_DISPB_DAT_5, + MX35_PAD_LD6__IPU_DISPB_DAT_6, + MX35_PAD_LD7__IPU_DISPB_DAT_7, + MX35_PAD_LD8__IPU_DISPB_DAT_8, + MX35_PAD_LD9__IPU_DISPB_DAT_9, + MX35_PAD_LD10__IPU_DISPB_DAT_10, + MX35_PAD_LD11__IPU_DISPB_DAT_11, + MX35_PAD_LD12__IPU_DISPB_DAT_12, + MX35_PAD_LD13__IPU_DISPB_DAT_13, + MX35_PAD_LD14__IPU_DISPB_DAT_14, + MX35_PAD_LD15__IPU_DISPB_DAT_15, + MX35_PAD_LD16__IPU_DISPB_DAT_16, + MX35_PAD_LD17__IPU_DISPB_DAT_17, + MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, + MX35_PAD_CONTRAST__IPU_DISPB_CONTR, + MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, + MX35_PAD_D3_REV__IPU_DISPB_D3_REV, + MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, + MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL +}; + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + + mxc_register_device(&mxc_uart_device1, &uart_pdata); + +#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE + i2c_register_board_info(0, pcm043_i2c_devices, + ARRAY_SIZE(pcm043_i2c_devices)); + + mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data); +#endif + + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + mxc_register_device(&mx3_fb, &mx3fb_pdata); +} + +static void __init pcm043_timer_init(void) +{ + mx35_clocks_init(); +} + +struct sys_timer pcm043_timer = { + .init = pcm043_timer_init, +}; + +MACHINE_START(PCM043, "Phytec Phycore pcm043") + /* Maintainer: Pengutronix */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx35_map_io, + .init_irq = mxc_init_irq, + .init_machine = mxc_board_init, + .timer = &pcm043_timer, +MACHINE_END + diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c index 5a01e48..82b31c4 100644 --- a/arch/arm/mach-mx3/qong.c +++ b/arch/arm/mach-mx3/qong.c @@ -279,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &qong_timer, diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index cd8de89..55ecc01 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -46,7 +46,6 @@ config MACH_OMAP_H2 config MACH_OMAP_H3 bool "TI H3 Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX -# select GPIOEXPANDER_OMAP help TI OMAP 1710 H3 board support. Say Y here if you have such a board. diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 1bda8f5..6867cd3 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -13,6 +13,10 @@ obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o # Power Management obj-$(CONFIG_PM) += pm.o sleep.o +# DSP +obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o +mailbox_mach-objs := mailbox.o + led-y := leds.o # Specific board support diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index 44d4a96..46098f5 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -26,19 +26,13 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } static int mmc_late_init(struct device *dev) { - int ret; - - ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); + int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); if (ret < 0) return ret; @@ -47,7 +41,7 @@ static int mmc_late_init(struct device *dev) return ret; } -static void mmc_shutdown(struct device *dev) +static void mmc_cleanup(struct device *dev) { gpio_free(H2_TPS_GPIO_MMC_PWR_EN); } @@ -60,7 +54,7 @@ static void mmc_shutdown(struct device *dev) static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 1, .init = mmc_late_init, - .shutdown = mmc_shutdown, + .cleanup = mmc_cleanup, .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 0d8a3c1..5e8877c 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -26,11 +26,7 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4695965..f597968 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -39,12 +39,10 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/gpioexpander.h> #include <mach/irqs.h> #include <mach/mux.h> #include <mach/tc.h> #include <mach/nand.h> -#include <mach/irda.h> #include <mach/usb.h> #include <mach/keypad.h> #include <mach/dma.h> @@ -276,104 +274,6 @@ static struct platform_device h3_kp_device = { .resource = h3_kp_resources, }; - -/* Select between the IrDA and aGPS module - */ -static int h3_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x26))) { - printk(KERN_ERR "Error reading from I/O EXPANDER \n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDA */ - if ((err = write_gpio_expa(expa | 0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x27)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x03; - - if (mode & IR_SIRMODE) { - expa |= 0x01; - } else { /* MIR/FIR */ - expa |= 0x03; - } - - if ((err = write_gpio_expa(expa, 0x27)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h3_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h3_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h3_transceiver_mode, - .select_irda = h3_select_irda, - .rx_channel = OMAP_DMA_UART3_RX, - .tx_channel = OMAP_DMA_UART3_TX, - .dest_start = UART3_THR, - .src_start = UART3_RHR, - .tx_trigger = 0, - .rx_trigger = 0, -}; - -static struct resource h3_irda_resources[] = { - [0] = { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 irda_dmamask = 0xffffffff; - -static struct platform_device h3_irda_device = { - .name = "omapirda", - .id = 0, - .dev = { - .platform_data = &h3_irda_data, - .dma_mask = &irda_dmamask, - }, - .num_resources = ARRAY_SIZE(h3_irda_resources), - .resource = h3_irda_resources, -}; - static struct platform_device h3_lcd_device = { .name = "lcd_h3", .id = -1, @@ -395,7 +295,6 @@ static struct platform_device *devices[] __initdata = { &nand_device, &smc91x_device, &intlat_device, - &h3_irda_device, &h3_kp_device, &h3_lcd_device, }; diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 7bc7a3c..e70fc7c 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -33,8 +33,11 @@ #include <mach/common.h> #include <mach/dsp_common.h> #include <mach/omapfb.h> +#include <mach/hwa742.h> #include <mach/lcd_mipid.h> #include <mach/mmc.h> +#include <mach/usb.h> +#include <mach/clock.h> #define ADS7846_PENDOWN_GPIO 15 @@ -162,6 +165,15 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = { }, }; +static struct hwa742_platform_data nokia770_hwa742_platform_data = { + .te_connected = 1, +}; + +static void hwa742_dev_init(void) +{ + clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL); + omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data); +} /* assume no Mini-AB port */ @@ -181,11 +193,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = { static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1); - else - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0); - + gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on); return 0; } @@ -374,6 +382,7 @@ static void __init omap_nokia770_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); omap_dsp_init(); + hwa742_dev_init(); ads7846_dev_init(); mipid_dev_init(); omap_usb_init(&nokia770_usb_config); diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 336e51d..436eed2 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -776,7 +776,7 @@ int __init omap1_clk_init(void) arm_idlect1_mask = ~0; for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - clk_init_one(c->lk.clk); + clk_preinit(c->lk.clk); cpu_mask = 0; if (cpu_is_omap16xx()) diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index d040c3f..a2d7814 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -40,8 +40,8 @@ static void omap1_mcbsp_request(unsigned int id) */ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { if (dsp_use++ == 0) { - api_clk = clk_get(NULL, "api_clk"); - dsp_clk = clk_get(NULL, "dsp_clk"); + api_clk = clk_get(NULL, "api_ck"); + dsp_clk = clk_get(NULL, "dsp_ck"); if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) { clk_enable(api_clk); clk_enable(dsp_clk); diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 9774c1f..5218943 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -53,11 +53,12 @@ #include <mach/clock.h> #include <mach/sram.h> #include <mach/tc.h> -#include <mach/pm.h> #include <mach/mux.h> #include <mach/dma.h> #include <mach/dmtimer.h> +#include "pm.h" + static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; @@ -101,7 +102,7 @@ static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; * going idle we continue to do idle even if we get * a clock tick interrupt . . */ -void omap_pm_idle(void) +void omap1_pm_idle(void) { extern __u32 arm_idlect1_mask; __u32 use_idlect1 = arm_idlect1_mask; @@ -222,7 +223,7 @@ static void omap_pm_wakeup_setup(void) #define EN_APICK 6 /* ARM_IDLECT2 */ #define DSP_EN 1 /* ARM_RSTCT1 */ -void omap_pm_suspend(void) +void omap1_pm_suspend(void) { unsigned long arg0 = 0, arg1 = 0; @@ -610,7 +611,7 @@ static int omap_pm_enter(suspend_state_t state) { case PM_SUSPEND_STANDBY: case PM_SUSPEND_MEM: - omap_pm_suspend(); + omap1_pm_suspend(); break; default: return -EINVAL; @@ -683,7 +684,7 @@ static int __init omap_pm_init(void) return -ENODEV; } - pm_idle = omap_pm_idle; + pm_idle = omap1_pm_idle; if (cpu_is_omap730()) setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/mach-omap1/pm.h index ce6ee79..9ed5e2c 100644 --- a/arch/arm/plat-omap/include/mach/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -1,7 +1,7 @@ /* - * arch/arm/plat-omap/include/mach/pm.h + * arch/arm/mach-omap1/pm.h * - * Header file for OMAP Power Management Routines + * Header file for OMAP1 Power Management Routines * * Author: MontaVista Software, Inc. * support@mvista.com @@ -31,8 +31,8 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __ASM_ARCH_OMAP_PM_H -#define __ASM_ARCH_OMAP_PM_H +#ifndef __ARCH_ARM_MACH_OMAP1_PM_H +#define __ARCH_ARM_MACH_OMAP1_PM_H /* * ---------------------------------------------------------------------------- @@ -106,8 +106,7 @@ #if !defined(CONFIG_ARCH_OMAP730) && \ !defined(CONFIG_ARCH_OMAP15XX) && \ - !defined(CONFIG_ARCH_OMAP16XX) && \ - !defined(CONFIG_ARCH_OMAP24XX) + !defined(CONFIG_ARCH_OMAP16XX) #warning "Power management for this processor not implemented yet" #endif @@ -115,29 +114,27 @@ #include <linux/clk.h> +extern struct kset power_subsys; + extern void prevent_idle_sleep(void); extern void allow_idle_sleep(void); -extern void omap_pm_idle(void); -extern void omap_pm_suspend(void); +extern void omap1_pm_idle(void); +extern void omap1_pm_suspend(void); + extern void omap730_cpu_suspend(unsigned short, unsigned short); extern void omap1510_cpu_suspend(unsigned short, unsigned short); extern void omap1610_cpu_suspend(unsigned short, unsigned short); -extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, - void __iomem *sdrc_power); extern void omap730_idle_loop_suspend(void); extern void omap1510_idle_loop_suspend(void); extern void omap1610_idle_loop_suspend(void); -extern void omap24xx_idle_loop_suspend(void); extern unsigned int omap730_cpu_suspend_sz; extern unsigned int omap1510_cpu_suspend_sz; extern unsigned int omap1610_cpu_suspend_sz; -extern unsigned int omap24xx_cpu_suspend_sz; extern unsigned int omap730_idle_loop_suspend_sz; extern unsigned int omap1510_idle_loop_suspend_sz; extern unsigned int omap1610_idle_loop_suspend_sz; -extern unsigned int omap24xx_idle_loop_suspend_sz; #ifdef CONFIG_OMAP_SERIAL_WAKE extern void omap_serial_wake_trigger(int enable); @@ -170,10 +167,6 @@ extern void omap_serial_wake_trigger(int enable); #define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x)) #define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] -#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x -#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] -#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] - /* * List of global OMAP registers to preserve. * More ones like CP and general purpose register values are preserved @@ -283,63 +276,5 @@ enum mpui1610_save_state { #endif }; -enum omap24xx_save_state { - OMAP24XX_SLEEP_SAVE_START = 0, - OMAP24XX_SLEEP_SAVE_INTC_MIR0, - OMAP24XX_SLEEP_SAVE_INTC_MIR1, - OMAP24XX_SLEEP_SAVE_INTC_MIR2, - - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM, - - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM, - - OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM, - - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM, - - OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE, - OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE, - OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO3_OE, - OMAP24XX_SLEEP_SAVE_GPIO4_OE, - OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT, - OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0, - OMAP24XX_SLEEP_SAVE_SIZE -}; - #endif /* ASSEMBLER */ #endif /* __ASM_ARCH_OMAP_PM_H */ diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 842090b..f754cee 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -26,9 +26,6 @@ #include <mach/mux.h> #include <mach/gpio.h> #include <mach/fpga.h> -#ifdef CONFIG_PM -#include <mach/pm.h> -#endif static struct clk * uart1_ck; static struct clk * uart2_ck; diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index f3eac93..22e8568 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -35,7 +35,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <mach/io.h> -#include <mach/pm.h> +#include "pm.h" .text diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 64ab386..a755eb5 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -25,7 +25,7 @@ config ARCH_OMAP3430 select ARCH_OMAP_OTG comment "OMAP Board Type" - depends on ARCH_OMAP2 || ARCH_OMAP3 + depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 config MACH_OMAP_GENERIC bool "Generic OMAP board" @@ -56,6 +56,10 @@ config MACH_OVERO bool "Gumstix Overo board" depends on ARCH_OMAP3 && ARCH_OMAP34XX +config MACH_OMAP3EVM + bool "OMAP 3530 EVM board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" depends on ARCH_OMAP3 && ARCH_OMAP34XX @@ -67,3 +71,11 @@ config MACH_OMAP_3430SDP config MACH_NOKIA_RX51 bool "Nokia RX-51 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + +config MACH_OMAP_ZOOM2 + bool "OMAP3 Zoom2 board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + +config MACH_OMAP_4430SDP + bool "OMAP 4430 SDP board" + depends on ARCH_OMAP4 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index c49d9bf..735bae5 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -3,12 +3,21 @@ # # Common support -obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \ - devices.o serial.o gpmc.o timer-gp.o powerdomain.o \ - clockdomain.o +obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o + +omap-2-3-common = irq.o sdrc.o +prcm-common = prcm.o powerdomain.o +clock-common = clock.o clockdomain.o + +obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common) +obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o +# SMP support ONLY available for OMAP4 +obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o +obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o + # Functions loaded to SRAM obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o @@ -20,14 +29,21 @@ obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # Power Management ifeq ($(CONFIG_PM),y) -obj-y += pm.o +obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o +obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o +obj-$(CONFIG_PM_DEBUG) += pm-debug.o endif # Clock framework obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o +iommu-y += iommu2.o +iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o + +obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y) + # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o @@ -40,6 +56,8 @@ obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ mmc-twl4030.o obj-$(CONFIG_MACH_OVERO) += board-overo.o \ mmc-twl4030.o +obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ + mmc-twl4030.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \ mmc-twl4030.o obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \ @@ -48,8 +66,17 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ board-rx51-peripherals.o \ mmc-twl4030.o +obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ + mmc-twl4030.o \ + board-zoom-debugboard.o + +obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o # Platform specific device init code -ifeq ($(CONFIG_USB_MUSB_SOC),y) obj-y += usb-musb.o -endif + +onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o +obj-y += $(onenand-m) $(onenand-y) + +smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o +obj-y += $(smc91x-m) $(smc91x-y) diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 2214365..9c3fdcd 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -36,14 +36,12 @@ #include <mach/common.h> #include <mach/gpmc.h> #include <mach/usb.h> +#include <mach/gpmc-smc91x.h> #include "mmc-twl4030.h" #define SDP2430_CS0_BASE 0x04000000 -#define SDP2430_FLASH_CS 0 -#define SDP2430_SMC91X_CS 5 - -#define SDP2430_ETHR_GPIO_IRQ 149 +#define SECONDARY_LCD_GPIO 147 static struct mtd_partition sdp2430_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ @@ -99,100 +97,53 @@ static struct platform_device sdp2430_flash_device = { .resource = &sdp2430_flash_resource, }; -static struct resource sdp2430_smc91x_resources[] = { - [0] = { - .start = SDP2430_CS0_BASE, - .end = SDP2430_CS0_BASE + SZ_64M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device sdp2430_smc91x_device = { - .name = "smc91x", +static struct platform_device sdp2430_lcd_device = { + .name = "sdp2430_lcd", .id = -1, - .num_resources = ARRAY_SIZE(sdp2430_smc91x_resources), - .resource = sdp2430_smc91x_resources, }; static struct platform_device *sdp2430_devices[] __initdata = { - &sdp2430_smc91x_device, &sdp2430_flash_device, + &sdp2430_lcd_device, }; -static inline void __init sdp2430_init_smc91x(void) -{ - int eth_cs; - unsigned long cs_mem_base; - unsigned int rate; - struct clk *gpmc_fck; +static struct omap_lcd_config sdp2430_lcd_config __initdata = { + .ctrl_name = "internal", +}; - eth_cs = SDP2430_SMC91X_CS; +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) - gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ - if (IS_ERR(gpmc_fck)) { - WARN_ON(1); - return; - } +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 5, + .gpio_irq = 149, + .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 | + IORESOURCE_IRQ_LOWLEVEL, - clk_enable(gpmc_fck); - rate = clk_get_rate(gpmc_fck); - - /* Make sure CS1 timings are correct, for 2430 always muxed */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200); - - if (rate >= 160000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else if (rate >= 130000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else { /* rate = 100000000 */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); - } +}; - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - goto out; - } +static void __init board_smc91x_init(void) +{ + if (omap_rev() > OMAP3430_REV_ES1_0) + board_smc91x_data.gpio_irq = 6; + else + board_smc91x_data.gpio_irq = 29; - sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300; - sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f; - udelay(100); + gpmc_smc91x_init(&board_smc91x_data); +} - if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", - SDP2430_ETHR_GPIO_IRQ); - gpmc_cs_free(eth_cs); - goto out; - } - gpio_direction_input(SDP2430_ETHR_GPIO_IRQ); +#else -out: - clk_disable(gpmc_fck); - clk_put(gpmc_fck); +static inline void board_smc91x_init(void) +{ } +#endif + static void __init omap_2430sdp_init_irq(void) { omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); - sdp2430_init_smc91x(); } static struct omap_uart_config sdp2430_uart_config __initdata = { @@ -201,6 +152,7 @@ static struct omap_uart_config sdp2430_uart_config __initdata = { static struct omap_board_config_kernel sdp2430_config[] = { {OMAP_TAG_UART, &sdp2430_uart_config}, + {OMAP_TAG_LCD, &sdp2430_lcd_config}, }; @@ -248,6 +200,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { static void __init omap_2430sdp_init(void) { + int ret; + omap2430_i2c_init(); platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); @@ -256,6 +210,12 @@ static void __init omap_2430sdp_init(void) omap_serial_init(); twl4030_mmc_init(mmc); usb_musb_init(); + board_smc91x_init(); + + /* Turn off secondary LCD backlight */ + ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight"); + if (ret == 0) + gpio_direction_output(SECONDARY_LCD_GPIO, 0); } static void __init omap_2430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index ed92749..496a90e 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -39,15 +39,13 @@ #include <mach/control.h> #include <mach/keypad.h> +#include <mach/gpmc-smc91x.h> +#include "sdram-qimonda-hyb18m512160af-6.h" #include "mmc-twl4030.h" #define CONFIG_DISABLE_HFCLK 1 -#define SDP3430_ETHR_GPIO_IRQ_SDPV1 29 -#define SDP3430_ETHR_GPIO_IRQ_SDPV2 6 -#define SDP3430_SMC91X_CS 3 - #define SDP3430_TS_GPIO_IRQ_SDPV1 3 #define SDP3430_TS_GPIO_IRQ_SDPV2 2 @@ -56,24 +54,6 @@ #define TWL4030_MSECURE_GPIO 22 -static struct resource sdp3430_smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0, - .end = 0, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device sdp3430_smc91x_device = { - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(sdp3430_smc91x_resources), - .resource = sdp3430_smc91x_resources, -}; - static int sdp3430_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -184,48 +164,14 @@ static struct regulator_consumer_supply sdp3430_vdvi_supply = { }; static struct platform_device *sdp3430_devices[] __initdata = { - &sdp3430_smc91x_device, &sdp3430_lcd_device, }; -static inline void __init sdp3430_init_smc91x(void) -{ - int eth_cs; - unsigned long cs_mem_base; - int eth_gpio = 0; - - eth_cs = SDP3430_SMC91X_CS; - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - return; - } - - sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300; - sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f; - udelay(100); - - if (omap_rev() > OMAP3430_REV_ES1_0) - eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2; - else - eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1; - - sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio); - - if (gpio_request(eth_gpio, "SMC91x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", - eth_gpio); - return; - } - gpio_direction_input(eth_gpio); -} - static void __init omap_3430sdp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(hyb18m512160af6_sdrc_params); omap_init_irq(); omap_gpio_init(); - sdp3430_init_smc91x(); } static struct omap_uart_config sdp3430_uart_config __initdata = { @@ -506,6 +452,32 @@ static int __init omap3430_i2c_init(void) return 0; } +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 3, + .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 | + IORESOURCE_IRQ_LOWLEVEL, +}; + +static void __init board_smc91x_init(void) +{ + if (omap_rev() > OMAP3430_REV_ES1_0) + board_smc91x_data.gpio_irq = 6; + else + board_smc91x_data.gpio_irq = 29; + + gpmc_smc91x_init(&board_smc91x_data); +} + +#else + +static inline void board_smc91x_init(void) +{ +} + +#endif + static void __init omap_3430sdp_init(void) { omap3430_i2c_init(); @@ -522,6 +494,7 @@ static void __init omap_3430sdp_init(void) ads7846_dev_init(); omap_serial_init(); usb_musb_init(); + board_smc91x_init(); } static void __init omap_3430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c new file mode 100644 index 0000000..57e477b --- /dev/null +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -0,0 +1,94 @@ +/* + * Board support file for OMAP4430 SDP. + * + * Copyright (C) 2009 Texas Instruments + * + * Author: Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Based on mach-omap2/board-3430sdp.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/board.h> +#include <mach/common.h> +#include <mach/control.h> +#include <mach/timer-gp.h> +#include <asm/hardware/gic.h> + +static struct platform_device sdp4430_lcd_device = { + .name = "sdp4430_lcd", + .id = -1, +}; + +static struct platform_device *sdp4430_devices[] __initdata = { + &sdp4430_lcd_device, +}; + +static struct omap_uart_config sdp4430_uart_config __initdata = { + .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2), +}; + +static struct omap_lcd_config sdp4430_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel sdp4430_config[] __initdata = { + { OMAP_TAG_UART, &sdp4430_uart_config }, + { OMAP_TAG_LCD, &sdp4430_lcd_config }, +}; + +static void __init gic_init_irq(void) +{ + gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29); + gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); +} + +static void __init omap_4430sdp_init_irq(void) +{ + omap2_init_common_hw(NULL); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(1); +#endif + gic_init_irq(); + omap_gpio_init(); +} + + +static void __init omap_4430sdp_init(void) +{ + platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); + omap_board_config = sdp4430_config; + omap_board_config_size = ARRAY_SIZE(sdp4430_config); + omap_serial_init(); +} + +static void __init omap_4430sdp_map_io(void) +{ + omap2_set_globals_443x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") + /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_4430sdp_map_io, + .init_irq = omap_4430sdp_init_irq, + .init_machine = omap_4430sdp_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index a0267a9..e7d017c 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -33,10 +33,8 @@ #include <mach/control.h> #include <mach/gpio.h> -#include <mach/gpioexpander.h> #include <mach/mux.h> #include <mach/usb.h> -#include <mach/irda.h> #include <mach/board.h> #include <mach/common.h> #include <mach/keypad.h> @@ -138,98 +136,6 @@ static struct platform_device h4_flash_device = { .resource = &h4_flash_resource, }; -/* Select between the IrDA and aGPS module - */ -static int h4_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x21))) { - printk(KERN_ERR "Error reading from I/O expander\n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDa */ - if ((err = write_gpio_expa(expa | 0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x20)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x01; - - if (!(mode & IR_SIRMODE)) { /* MIR/FIR */ - expa |= 0x01; - } - - if ((err = write_gpio_expa(expa, 0x20)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h4_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h4_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h4_transceiver_mode, - .select_irda = h4_select_irda, - .rx_channel = OMAP24XX_DMA_UART3_RX, - .tx_channel = OMAP24XX_DMA_UART3_TX, - .dest_start = OMAP_UART3_BASE, - .src_start = OMAP_UART3_BASE, - .tx_trigger = OMAP24XX_DMA_UART3_TX, - .rx_trigger = OMAP24XX_DMA_UART3_RX, -}; - -static struct resource h4_irda_resources[] = { - [0] = { - .start = INT_24XX_UART3_IRQ, - .end = INT_24XX_UART3_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device h4_irda_device = { - .name = "omapirda", - .id = -1, - .dev = { - .platform_data = &h4_irda_data, - }, - .num_resources = 1, - .resource = h4_irda_resources, -}; - static struct omap_kp_platform_data h4_kp_data = { .rows = 6, .cols = 7, @@ -255,7 +161,6 @@ static struct platform_device h4_lcd_device = { static struct platform_device *h4_devices[] __initdata = { &h4_flash_device, - &h4_irda_device, &h4_kp_device, &h4_lcd_device, }; diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index da57b0f..d8bc0a7 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -16,11 +16,13 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/input.h> +#include <linux/gpio_keys.h> #include <linux/workqueue.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/regulator/machine.h> #include <linux/i2c/twl4030.h> #include <linux/io.h> #include <linux/smsc911x.h> @@ -39,6 +41,7 @@ #include <asm/delay.h> #include <mach/control.h> #include <mach/usb.h> +#include <mach/keypad.h> #include "mmc-twl4030.h" @@ -77,8 +80,163 @@ static struct platform_device ldp_smsc911x_device = { }, }; -static struct platform_device *ldp_devices[] __initdata = { - &ldp_smsc911x_device, +static int ldp_twl4030_keymap[] = { + KEY(0, 0, KEY_1), + KEY(1, 0, KEY_2), + KEY(2, 0, KEY_3), + KEY(0, 1, KEY_4), + KEY(1, 1, KEY_5), + KEY(2, 1, KEY_6), + KEY(3, 1, KEY_F5), + KEY(0, 2, KEY_7), + KEY(1, 2, KEY_8), + KEY(2, 2, KEY_9), + KEY(3, 2, KEY_F6), + KEY(0, 3, KEY_F7), + KEY(1, 3, KEY_0), + KEY(2, 3, KEY_F8), + PERSISTENT_KEY(4, 5), + KEY(4, 4, KEY_VOLUMEUP), + KEY(5, 5, KEY_VOLUMEDOWN), + 0 +}; + +static struct twl4030_keypad_data ldp_kp_twl4030_data = { + .rows = 6, + .cols = 6, + .keymap = ldp_twl4030_keymap, + .keymapsize = ARRAY_SIZE(ldp_twl4030_keymap), + .rep = 1, +}; + +static struct gpio_keys_button ldp_gpio_keys_buttons[] = { + [0] = { + .code = KEY_ENTER, + .gpio = 101, + .desc = "enter sw", + .active_low = 1, + .debounce_interval = 30, + }, + [1] = { + .code = KEY_F1, + .gpio = 102, + .desc = "func 1", + .active_low = 1, + .debounce_interval = 30, + }, + [2] = { + .code = KEY_F2, + .gpio = 103, + .desc = "func 2", + .active_low = 1, + .debounce_interval = 30, + }, + [3] = { + .code = KEY_F3, + .gpio = 104, + .desc = "func 3", + .active_low = 1, + .debounce_interval = 30, + }, + [4] = { + .code = KEY_F4, + .gpio = 105, + .desc = "func 4", + .active_low = 1, + .debounce_interval = 30, + }, + [5] = { + .code = KEY_LEFT, + .gpio = 106, + .desc = "left sw", + .active_low = 1, + .debounce_interval = 30, + }, + [6] = { + .code = KEY_RIGHT, + .gpio = 107, + .desc = "right sw", + .active_low = 1, + .debounce_interval = 30, + }, + [7] = { + .code = KEY_UP, + .gpio = 108, + .desc = "up sw", + .active_low = 1, + .debounce_interval = 30, + }, + [8] = { + .code = KEY_DOWN, + .gpio = 109, + .desc = "down sw", + .active_low = 1, + .debounce_interval = 30, + }, +}; + +static struct gpio_keys_platform_data ldp_gpio_keys = { + .buttons = ldp_gpio_keys_buttons, + .nbuttons = ARRAY_SIZE(ldp_gpio_keys_buttons), + .rep = 1, +}; + +static struct platform_device ldp_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &ldp_gpio_keys, + }, +}; + +static int ts_gpio; + +/** + * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq + * + * @return - void. If request gpio fails then Flag KERN_ERR. + */ +static void ads7846_dev_init(void) +{ + if (gpio_request(ts_gpio, "ads7846 irq") < 0) { + printk(KERN_ERR "can't get ads746 pen down GPIO\n"); + return; + } + + gpio_direction_input(ts_gpio); + omap_set_gpio_debounce(ts_gpio, 1); + omap_set_gpio_debounce_time(ts_gpio, 0xa); +} + +static int ads7846_get_pendown_state(void) +{ + return !gpio_get_value(ts_gpio); +} + +static struct ads7846_platform_data tsc2046_config __initdata = { + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, +}; + +static struct omap2_mcspi_device_config tsc2046_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info ldp_spi_board_info[] __initdata = { + [0] = { + /* + * TSC2046 operates at a max freqency of 2MHz, so + * operate slightly below at 1.5MHz + */ + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &tsc2046_mcspi_config, + .irq = 0, + .platform_data = &tsc2046_config, + }, }; static inline void __init ldp_init_smsc911x(void) @@ -122,8 +280,22 @@ static struct omap_uart_config ldp_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; +static struct platform_device ldp_lcd_device = { + .name = "ldp_lcd", + .id = -1, +}; + +static struct omap_lcd_config ldp_lcd_config __initdata = { + .ctrl_name = "internal", +}; + static struct omap_board_config_kernel ldp_config[] __initdata = { { OMAP_TAG_UART, &ldp_uart_config }, + { OMAP_TAG_LCD, &ldp_lcd_config }, +}; + +static struct twl4030_usb_data ldp_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, }; static struct twl4030_gpio_platform_data ldp_gpio_data = { @@ -132,12 +304,39 @@ static struct twl4030_gpio_platform_data ldp_gpio_data = { .irq_end = TWL4030_GPIO_IRQ_END, }; +static struct twl4030_madc_platform_data ldp_madc_data = { + .irq_line = 1, +}; + +static struct regulator_consumer_supply ldp_vmmc1_supply = { + .supply = "vmmc", +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data ldp_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &ldp_vmmc1_supply, +}; + static struct twl4030_platform_data ldp_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ + .madc = &ldp_madc_data, + .usb = &ldp_usb_data, + .vmmc1 = &ldp_vmmc1, .gpio = &ldp_gpio_data, + .keypad = &ldp_kp_twl4030_data, }; static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = { @@ -168,15 +367,29 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; +static struct platform_device *ldp_devices[] __initdata = { + &ldp_smsc911x_device, + &ldp_lcd_device, + &ldp_gpio_keys_device, +}; + static void __init omap_ldp_init(void) { omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); omap_board_config = ldp_config; omap_board_config_size = ARRAY_SIZE(ldp_config); + ts_gpio = 54; + ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio); + spi_register_board_info(ldp_spi_board_info, + ARRAY_SIZE(ldp_spi_board_info)); + ads7846_dev_init(); omap_serial_init(); - twl4030_mmc_init(mmc); usb_musb_init(); + + twl4030_mmc_init(mmc); + /* link regulators to MMC adapters */ + ldp_vmmc1_supply.dev = mmc[0].dev; } static void __init omap_ldp_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 744740a..991ac9c 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -28,6 +28,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> +#include <linux/regulator/machine.h> #include <linux/i2c/twl4030.h> #include <mach/hardware.h> @@ -42,6 +43,7 @@ #include <mach/nand.h> #include <mach/mux.h> #include <mach/usb.h> +#include <mach/timer-gp.h> #include "mmc-twl4030.h" @@ -104,6 +106,8 @@ static struct platform_device omap3beagle_nand_device = { .resource = &omap3beagle_nand_resource, }; +#include "sdram-micron-mt46h32m32lf-6.h" + static struct omap_uart_config omap3_beagle_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; @@ -117,6 +121,23 @@ static struct twl4030_hsmmc_info mmc[] = { {} /* Terminator */ }; +static struct platform_device omap3_beagle_lcd_device = { + .name = "omap3beagle_lcd", + .id = -1, +}; + +static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct regulator_consumer_supply beagle_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply beagle_vsim_supply = { + .supply = "vmmc_aux", +}; + static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, @@ -127,6 +148,10 @@ static int beagle_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; twl4030_mmc_init(mmc); + /* link regulators to MMC adapters */ + beagle_vmmc1_supply.dev = mmc[0].dev; + beagle_vsim_supply.dev = mmc[0].dev; + /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ @@ -155,12 +180,85 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = { .setup = beagle_twl_gpio_setup, }; +static struct regulator_consumer_supply beagle_vdac_supply = { + .supply = "vdac", + .dev = &omap3_beagle_lcd_device.dev, +}; + +static struct regulator_consumer_supply beagle_vdvi_supply = { + .supply = "vdvi", + .dev = &omap3_beagle_lcd_device.dev, +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data beagle_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &beagle_vmmc1_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data beagle_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &beagle_vsim_supply, +}; + +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data beagle_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &beagle_vdac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data beagle_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &beagle_vdvi_supply, +}; + static struct twl4030_platform_data beagle_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ .gpio = &beagle_gpio_data, + .vmmc1 = &beagle_vmmc1, + .vsim = &beagle_vsim, + .vdac = &beagle_vdac, + .vpll2 = &beagle_vpll2, }; static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { @@ -184,20 +282,14 @@ static int __init omap3_beagle_i2c_init(void) static void __init omap3_beagle_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif omap_gpio_init(); } -static struct platform_device omap3_beagle_lcd_device = { - .name = "omap3beagle_lcd", - .id = -1, -}; - -static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { - .ctrl_name = "internal", -}; - static struct gpio_led gpio_leds[] = { { .name = "beagleboard::usr0", diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c new file mode 100644 index 0000000..d3cc145 --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -0,0 +1,329 @@ +/* + * linux/arch/arm/mach-omap2/board-omap3evm.c + * + * Copyright (C) 2008 Texas Instruments + * + * Modified from mach-omap2/board-3430sdp.c + * + * Initial code: Syed Mohammed Khasim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/leds.h> + +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <linux/i2c/twl4030.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/board.h> +#include <mach/mux.h> +#include <mach/usb.h> +#include <mach/common.h> +#include <mach/mcspi.h> +#include <mach/keypad.h> + +#include "sdram-micron-mt46h32m32lf-6.h" +#include "mmc-twl4030.h" + +#define OMAP3_EVM_TS_GPIO 175 + +#define OMAP3EVM_ETHR_START 0x2c000000 +#define OMAP3EVM_ETHR_SIZE 1024 +#define OMAP3EVM_ETHR_GPIO_IRQ 176 +#define OMAP3EVM_SMC911X_CS 5 + +static struct resource omap3evm_smc911x_resources[] = { + [0] = { + .start = OMAP3EVM_ETHR_START, + .end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), + .end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device omap3evm_smc911x_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(omap3evm_smc911x_resources), + .resource = &omap3evm_smc911x_resources[0], +}; + +static inline void __init omap3evm_init_smc911x(void) +{ + int eth_cs; + struct clk *l3ck; + unsigned int rate; + + eth_cs = OMAP3EVM_SMC911X_CS; + + l3ck = clk_get(NULL, "l3_ck"); + if (IS_ERR(l3ck)) + rate = 100000000; + else + rate = clk_get_rate(l3ck); + + if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", + OMAP3EVM_ETHR_GPIO_IRQ); + return; + } + + gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ); +} + +static struct omap_uart_config omap3_evm_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = 63, + }, + {} /* Terminator */ +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "omap3evm::ledb", + /* normally not visible (board underside) */ + .default_trigger = "default-on", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + + +static int omap3evm_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + omap_cfg_reg(L8_34XX_GPIO63); + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); + + /* + * Most GPIOs are for USB OTG. Some are mostly sent to + * the P2 connector; notably LEDA for the LCD backlight. + */ + + /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + + platform_device_register(&leds_gpio); + + return 0; +} + +static struct twl4030_gpio_platform_data omap3evm_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .setup = omap3evm_twl_gpio_setup, +}; + +static struct twl4030_usb_data omap3evm_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static int omap3evm_keymap[] = { + KEY(0, 0, KEY_LEFT), + KEY(0, 1, KEY_RIGHT), + KEY(0, 2, KEY_A), + KEY(0, 3, KEY_B), + KEY(1, 0, KEY_DOWN), + KEY(1, 1, KEY_UP), + KEY(1, 2, KEY_E), + KEY(1, 3, KEY_F), + KEY(2, 0, KEY_ENTER), + KEY(2, 1, KEY_I), + KEY(2, 2, KEY_J), + KEY(2, 3, KEY_K), + KEY(3, 0, KEY_M), + KEY(3, 1, KEY_N), + KEY(3, 2, KEY_O), + KEY(3, 3, KEY_P) +}; + +static struct twl4030_keypad_data omap3evm_kp_data = { + .rows = 4, + .cols = 4, + .keymap = omap3evm_keymap, + .keymapsize = ARRAY_SIZE(omap3evm_keymap), + .rep = 1, +}; + +static struct twl4030_madc_platform_data omap3evm_madc_data = { + .irq_line = 1, +}; + +static struct twl4030_platform_data omap3evm_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .keypad = &omap3evm_kp_data, + .madc = &omap3evm_madc_data, + .usb = &omap3evm_usb_data, + .gpio = &omap3evm_gpio_data, +}; + +static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &omap3evm_twldata, + }, +}; + +static int __init omap3_evm_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo, + ARRAY_SIZE(omap3evm_i2c_boardinfo)); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +static struct platform_device omap3_evm_lcd_device = { + .name = "omap3evm_lcd", + .id = -1, +}; + +static struct omap_lcd_config omap3_evm_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static void ads7846_dev_init(void) +{ + if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0) + printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); + + gpio_direction_input(OMAP3_EVM_TS_GPIO); + + omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1); + omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa); +} + +static int ads7846_get_pendown_state(void) +{ + return !gpio_get_value(OMAP3_EVM_TS_GPIO); +} + +struct ads7846_platform_data ads7846_config = { + .x_max = 0x0fff, + .y_max = 0x0fff, + .x_plate_ohms = 180, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 3, + .debounce_rep = 1, + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, + .settle_delay_usecs = 150, +}; + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +struct spi_board_info omap3evm_spi_board_info[] = { + [0] = { + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO), + .platform_data = &ads7846_config, + }, +}; + +static void __init omap3_evm_init_irq(void) +{ + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap_init_irq(); + omap_gpio_init(); + omap3evm_init_smc911x(); +} + +static struct omap_board_config_kernel omap3_evm_config[] __initdata = { + { OMAP_TAG_UART, &omap3_evm_uart_config }, + { OMAP_TAG_LCD, &omap3_evm_lcd_config }, +}; + +static struct platform_device *omap3_evm_devices[] __initdata = { + &omap3_evm_lcd_device, + &omap3evm_smc911x_device, +}; + +static void __init omap3_evm_init(void) +{ + omap3_evm_i2c_init(); + + platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices)); + omap_board_config = omap3_evm_config; + omap_board_config_size = ARRAY_SIZE(omap3_evm_config); + + spi_register_board_info(omap3evm_spi_board_info, + ARRAY_SIZE(omap3evm_spi_board_info)); + + omap_serial_init(); + usb_musb_init(); + ads7846_dev_init(); +} + +static void __init omap3_evm_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP3EVM, "OMAP3 EVM") + /* Maintainer: Syed Mohammed Khasim - Texas Instruments */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_evm_map_io, + .init_irq = omap3_evm_init_irq, + .init_machine = omap3_evm_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 402f09c..e32aa23 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -23,7 +23,11 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/regulator/machine.h> #include <linux/i2c/twl4030.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -35,11 +39,154 @@ #include <mach/hardware.h> #include <mach/mcspi.h> #include <mach/usb.h> +#include <mach/keypad.h> +#include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" #define OMAP3_PANDORA_TS_GPIO 94 +/* hardware debounce: (value + 1) * 31us */ +#define GPIO_DEBOUNCE_TIME 127 + +static struct gpio_led pandora_gpio_leds[] = { + { + .name = "pandora::sd1", + .default_trigger = "mmc0", + .gpio = 128, + }, { + .name = "pandora::sd2", + .default_trigger = "mmc1", + .gpio = 129, + }, { + .name = "pandora::bluetooth", + .gpio = 158, + }, { + .name = "pandora::wifi", + .gpio = 159, + }, +}; + +static struct gpio_led_platform_data pandora_gpio_led_data = { + .leds = pandora_gpio_leds, + .num_leds = ARRAY_SIZE(pandora_gpio_leds), +}; + +static struct platform_device pandora_leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &pandora_gpio_led_data, + }, +}; + +#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \ +{ \ + .gpio = gpio_num, \ + .type = ev_type, \ + .code = ev_code, \ + .active_low = act_low, \ + .desc = "btn " descr, \ +} + +#define GPIO_BUTTON_LOW(gpio_num, event_code, description) \ + GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description) + +static struct gpio_keys_button pandora_gpio_keys[] = { + GPIO_BUTTON_LOW(110, KEY_UP, "up"), + GPIO_BUTTON_LOW(103, KEY_DOWN, "down"), + GPIO_BUTTON_LOW(96, KEY_LEFT, "left"), + GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"), + GPIO_BUTTON_LOW(111, BTN_A, "a"), + GPIO_BUTTON_LOW(106, BTN_B, "b"), + GPIO_BUTTON_LOW(109, BTN_X, "x"), + GPIO_BUTTON_LOW(101, BTN_Y, "y"), + GPIO_BUTTON_LOW(102, BTN_TL, "l"), + GPIO_BUTTON_LOW(97, BTN_TL2, "l2"), + GPIO_BUTTON_LOW(105, BTN_TR, "r"), + GPIO_BUTTON_LOW(107, BTN_TR2, "r2"), + GPIO_BUTTON_LOW(104, KEY_LEFTCTRL, "ctrl"), + GPIO_BUTTON_LOW(99, KEY_MENU, "menu"), + GPIO_BUTTON_LOW(176, KEY_COFFEE, "hold"), + GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"), + GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"), +}; + +static struct gpio_keys_platform_data pandora_gpio_key_info = { + .buttons = pandora_gpio_keys, + .nbuttons = ARRAY_SIZE(pandora_gpio_keys), +}; + +static struct platform_device pandora_keys_gpio = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &pandora_gpio_key_info, + }, +}; + +static void __init pandora_keys_gpio_init(void) +{ + /* set debounce time for GPIO banks 4 and 6 */ + omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME); + omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME); +} + +static int pandora_keypad_map[] = { + /* col, row, code */ + KEY(0, 0, KEY_9), + KEY(0, 1, KEY_0), + KEY(0, 2, KEY_BACKSPACE), + KEY(0, 3, KEY_O), + KEY(0, 4, KEY_P), + KEY(0, 5, KEY_K), + KEY(0, 6, KEY_L), + KEY(0, 7, KEY_ENTER), + KEY(1, 0, KEY_8), + KEY(1, 1, KEY_7), + KEY(1, 2, KEY_6), + KEY(1, 3, KEY_5), + KEY(1, 4, KEY_4), + KEY(1, 5, KEY_3), + KEY(1, 6, KEY_2), + KEY(1, 7, KEY_1), + KEY(2, 0, KEY_I), + KEY(2, 1, KEY_U), + KEY(2, 2, KEY_Y), + KEY(2, 3, KEY_T), + KEY(2, 4, KEY_R), + KEY(2, 5, KEY_E), + KEY(2, 6, KEY_W), + KEY(2, 7, KEY_Q), + KEY(3, 0, KEY_J), + KEY(3, 1, KEY_H), + KEY(3, 2, KEY_G), + KEY(3, 3, KEY_F), + KEY(3, 4, KEY_D), + KEY(3, 5, KEY_S), + KEY(3, 6, KEY_A), + KEY(3, 7, KEY_LEFTSHIFT), + KEY(4, 0, KEY_N), + KEY(4, 1, KEY_B), + KEY(4, 2, KEY_V), + KEY(4, 3, KEY_C), + KEY(4, 4, KEY_X), + KEY(4, 5, KEY_Z), + KEY(4, 6, KEY_DOT), + KEY(4, 7, KEY_COMMA), + KEY(5, 0, KEY_M), + KEY(5, 1, KEY_SPACE), + KEY(5, 2, KEY_FN), +}; + +static struct twl4030_keypad_data pandora_kp_data = { + .rows = 8, + .cols = 6, + .keymap = pandora_keypad_map, + .keymapsize = ARRAY_SIZE(pandora_keypad_map), + .rep = 1, +}; + static struct twl4030_hsmmc_info omap3pandora_mmc[] = { { .mmc = 1, @@ -69,6 +216,14 @@ static struct omap_uart_config omap3pandora_uart_config __initdata = { .enabled_uarts = (1 << 2), /* UART3 */ }; +static struct regulator_consumer_supply pandora_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply pandora_vmmc2_supply = { + .supply = "vmmc", +}; + static int omap3pandora_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -77,6 +232,10 @@ static int omap3pandora_twl_gpio_setup(struct device *dev, omap3pandora_mmc[1].gpio_cd = gpio + 1; twl4030_mmc_init(omap3pandora_mmc); + /* link regulators to MMC adapters */ + pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev; + pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev; + return 0; } @@ -87,6 +246,36 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { .setup = omap3pandora_twl_gpio_setup, }; +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data pandora_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &pandora_vmmc1_supply, +}; + +/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */ +static struct regulator_init_data pandora_vmmc2 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &pandora_vmmc2_supply, +}; + static struct twl4030_usb_data omap3pandora_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; @@ -96,6 +285,9 @@ static struct twl4030_platform_data omap3pandora_twldata = { .irq_end = TWL4030_IRQ_END, .gpio = &omap3pandora_gpio_data, .usb = &omap3pandora_usb_data, + .vmmc1 = &pandora_vmmc1, + .vmmc2 = &pandora_vmmc2, + .keypad = &pandora_kp_data, }; static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = { @@ -118,7 +310,7 @@ static int __init omap3pandora_i2c_init(void) static void __init omap3pandora_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } @@ -188,6 +380,8 @@ static struct omap_board_config_kernel omap3pandora_config[] __initdata = { static struct platform_device *omap3pandora_devices[] __initdata = { &omap3pandora_lcd_device, + &pandora_leds_gpio, + &pandora_keys_gpio, }; static void __init omap3pandora_init(void) @@ -201,6 +395,7 @@ static void __init omap3pandora_init(void) spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap3pandora_ads7846_init(); + pandora_keys_gpio_init(); usb_musb_init(); } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index b1f23be..dff5528 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -27,6 +27,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/i2c/twl4030.h> +#include <linux/regulator/machine.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -45,6 +46,7 @@ #include <mach/nand.h> #include <mach/usb.h> +#include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" #define OVERO_GPIO_BT_XGATE 15 @@ -271,21 +273,76 @@ static struct omap_uart_config overo_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, + { + .mmc = 2, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + .transceiver = true, + .ocr_mask = 0x00100000, /* 3.3V */ + }, + {} /* Terminator */ +}; + +static struct regulator_consumer_supply overo_vmmc1_supply = { + .supply = "vmmc", +}; + +static int overo_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + twl4030_mmc_init(mmc); + + overo_vmmc1_supply.dev = mmc[0].dev; + + return 0; +} + static struct twl4030_gpio_platform_data overo_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, + .setup = overo_twl_gpio_setup, +}; + +static struct twl4030_usb_data overo_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static struct regulator_init_data overo_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &overo_vmmc1_supply, }; +/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */ + static struct twl4030_platform_data overo_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, .gpio = &overo_gpio_data, + .usb = &overo_usb_data, + .vmmc1 = &overo_vmmc1, }; static struct i2c_board_info __initdata overo_i2c_boardinfo[] = { { - I2C_BOARD_INFO("twl4030", 0x48), + I2C_BOARD_INFO("tps65950", 0x48), .flags = I2C_CLIENT_WAKE, .irq = INT_34XX_SYS_NIRQ, .platform_data = &overo_twldata, @@ -303,7 +360,7 @@ static int __init overo_i2c_init(void) static void __init overo_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } @@ -326,23 +383,6 @@ static struct platform_device *overo_devices[] __initdata = { &overo_lcd_device, }; -static struct twl4030_hsmmc_info mmc[] __initdata = { - { - .mmc = 1, - .wires = 4, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, - { - .mmc = 2, - .wires = 4, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .transceiver = true, - }, - {} /* Terminator */ -}; - static void __init overo_init(void) { overo_i2c_init(); @@ -350,7 +390,6 @@ static void __init overo_init(void) omap_board_config = overo_config; omap_board_config_size = ARRAY_SIZE(overo_config); omap_serial_init(); - twl4030_mmc_init(mmc); overo_flash_init(); usb_musb_init(); overo_ads7846_init(); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index a738172..da93b86 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -27,30 +27,13 @@ #include <mach/dma.h> #include <mach/gpmc.h> #include <mach/keypad.h> +#include <mach/onenand.h> +#include <mach/gpmc-smc91x.h> #include "mmc-twl4030.h" - -#define SMC91X_CS 1 -#define SMC91X_GPIO_IRQ 54 -#define SMC91X_GPIO_RESET 164 -#define SMC91X_GPIO_PWRDWN 86 - -static struct resource rx51_smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device rx51_smc91x_device = { - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(rx51_smc91x_resources), - .resource = rx51_smc91x_resources, -}; +#define SYSTEM_REV_B_USES_VAUX3 0x1699 +#define SYSTEM_REV_S_USES_VAUX3 0x8 static int rx51_keymap[] = { KEY(0, 0, KEY_Q), @@ -107,98 +90,6 @@ static struct twl4030_keypad_data rx51_kp_data = { .rep = 1, }; -static struct platform_device *rx51_peripherals_devices[] = { - &rx51_smc91x_device, -}; - -/* - * Timings are taken from smsc-lan91c96-ms.pdf - */ -static int smc91x_init_gpmc(int cs) -{ - struct gpmc_timings t; - const int t2_r = 45; /* t2 in Figure 12.10 */ - const int t2_w = 30; /* t2 in Figure 12.11 */ - const int t3 = 15; /* t3 in Figure 12.10 */ - const int t5_r = 0; /* t5 in Figure 12.10 */ - const int t6_r = 45; /* t6 in Figure 12.10 */ - const int t6_w = 0; /* t6 in Figure 12.11 */ - const int t7_w = 15; /* t7 in Figure 12.11 */ - const int t15 = 12; /* t15 in Figure 12.2 */ - const int t20 = 185; /* t20 in Figure 12.2 */ - - memset(&t, 0, sizeof(t)); - - t.cs_on = t15; - t.cs_rd_off = t3 + t2_r + t5_r; /* Figure 12.10 */ - t.cs_wr_off = t3 + t2_w + t6_w; /* Figure 12.11 */ - t.adv_on = t3; /* Figure 12.10 */ - t.adv_rd_off = t3 + t2_r; /* Figure 12.10 */ - t.adv_wr_off = t3 + t2_w; /* Figure 12.11 */ - t.oe_off = t3 + t2_r + t5_r; /* Figure 12.10 */ - t.oe_on = t.oe_off - t6_r; /* Figure 12.10 */ - t.we_off = t3 + t2_w + t6_w; /* Figure 12.11 */ - t.we_on = t.we_off - t7_w; /* Figure 12.11 */ - t.rd_cycle = t20; /* Figure 12.2 */ - t.wr_cycle = t20; /* Figure 12.4 */ - t.access = t3 + t2_r + t5_r; /* Figure 12.10 */ - t.wr_access = t3 + t2_w + t6_w; /* Figure 12.11 */ - - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16); - - return gpmc_cs_set_timings(cs, &t); -} - -static void __init rx51_init_smc91x(void) -{ - unsigned long cs_mem_base; - int ret; - - omap_cfg_reg(U8_34XX_GPIO54_DOWN); - omap_cfg_reg(G25_34XX_GPIO86_OUT); - omap_cfg_reg(H19_34XX_GPIO164_OUT); - - if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - return; - } - - rx51_smc91x_resources[0].start = cs_mem_base + 0x300; - rx51_smc91x_resources[0].end = cs_mem_base + 0x30f; - - smc91x_init_gpmc(SMC91X_CS); - - if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0) - goto free1; - - gpio_direction_input(SMC91X_GPIO_IRQ); - rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ); - - ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown"); - if (ret) - goto free2; - gpio_direction_output(SMC91X_GPIO_PWRDWN, 0); - - ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset"); - if (ret) - goto free3; - gpio_direction_output(SMC91X_GPIO_RESET, 0); - gpio_set_value(SMC91X_GPIO_RESET, 1); - msleep(100); - gpio_set_value(SMC91X_GPIO_RESET, 0); - - return; - -free3: - gpio_free(SMC91X_GPIO_PWRDWN); -free2: - gpio_free(SMC91X_GPIO_IRQ); -free1: - gpmc_cs_free(SMC91X_CS); - - printk(KERN_ERR "Could not initialize smc91x\n"); -} - static struct twl4030_madc_platform_data rx51_madc_data = { .irq_line = 1, }; @@ -259,7 +150,7 @@ static struct regulator_init_data rx51_vaux2 = { }; /* VAUX3 - adds more power to VIO_18 rail */ -static struct regulator_init_data rx51_vaux3 = { +static struct regulator_init_data rx51_vaux3_cam = { .constraints = { .name = "VCAM_DIG_18", .min_uV = 1800000, @@ -272,6 +163,22 @@ static struct regulator_init_data rx51_vaux3 = { }, }; +static struct regulator_init_data rx51_vaux3_mmc = { + .constraints = { + .name = "VMMC2_30", + .min_uV = 2800000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &rx51_vmmc2_supply, +}; + static struct regulator_init_data rx51_vaux4 = { .constraints = { .name = "VCAM_ANA_28", @@ -382,10 +289,8 @@ static struct twl4030_platform_data rx51_twldata = { .vaux1 = &rx51_vaux1, .vaux2 = &rx51_vaux2, - .vaux3 = &rx51_vaux3, .vaux4 = &rx51_vaux4, .vmmc1 = &rx51_vmmc1, - .vmmc2 = &rx51_vmmc2, .vsim = &rx51_vsim, .vdac = &rx51_vdac, }; @@ -401,6 +306,13 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { static int __init rx51_i2c_init(void) { + if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || + system_rev >= SYSTEM_REV_B_USES_VAUX3) + rx51_twldata.vaux3 = &rx51_vaux3_mmc; + else { + rx51_twldata.vaux3 = &rx51_vaux3_cam; + rx51_twldata.vmmc2 = &rx51_vmmc2; + } omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1, ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); omap_register_i2c_bus(2, 100, NULL, 0); @@ -408,12 +320,94 @@ static int __init rx51_i2c_init(void) return 0; } +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) + +static struct mtd_partition onenand_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = 0x20000, + .mask_flags = MTD_WRITEABLE, /* Force read-only */ + }, + { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = 0x60000, + }, + { + .name = "log", + .offset = MTDPART_OFS_APPEND, + .size = 0x40000, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 0x200000, + }, + { + .name = "initfs", + .offset = MTDPART_OFS_APPEND, + .size = 0x200000, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_onenand_platform_data board_onenand_data = { + .cs = 0, + .gpio_irq = 65, + .parts = onenand_partitions, + .nr_parts = ARRAY_SIZE(onenand_partitions), +}; + +static void __init board_onenand_init(void) +{ + gpmc_onenand_init(&board_onenand_data); +} + +#else + +static inline void board_onenand_init(void) +{ +} + +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 1, + .gpio_irq = 54, + .gpio_pwrdwn = 86, + .gpio_reset = 164, + .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL, +}; + +static void __init board_smc91x_init(void) +{ + omap_cfg_reg(U8_34XX_GPIO54_DOWN); + omap_cfg_reg(G25_34XX_GPIO86_OUT); + omap_cfg_reg(H19_34XX_GPIO164_OUT); + + gpmc_smc91x_init(&board_smc91x_data); +} + +#else + +static inline void board_smc91x_init(void) +{ +} + +#endif void __init rx51_peripherals_init(void) { - platform_add_devices(rx51_peripherals_devices, - ARRAY_SIZE(rx51_peripherals_devices)); rx51_i2c_init(); - rx51_init_smc91x(); + board_onenand_init(); + board_smc91x_init(); } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 3a0daac..374ff63 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -15,7 +15,6 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/delay.h> #include <linux/gpio.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c new file mode 100644 index 0000000..bac5c43 --- /dev/null +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc. + * Mikkel Christensen <mlc@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/serial_8250.h> +#include <linux/smsc911x.h> + +#include <mach/gpmc.h> + +#define ZOOM2_SMSC911X_CS 7 +#define ZOOM2_SMSC911X_GPIO 158 +#define ZOOM2_QUADUART_CS 3 +#define ZOOM2_QUADUART_GPIO 102 +#define QUART_CLK 1843200 +#define DEBUG_BASE 0x08000000 +#define ZOOM2_ETHR_START DEBUG_BASE + +static struct resource zoom2_smsc911x_resources[] = { + [0] = { + .start = ZOOM2_ETHR_START, + .end = ZOOM2_ETHR_START + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config zoom2_smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device zoom2_smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(zoom2_smsc911x_resources), + .resource = zoom2_smsc911x_resources, + .dev = { + .platform_data = &zoom2_smsc911x_config, + }, +}; + +static inline void __init zoom2_init_smsc911x(void) +{ + int eth_cs; + unsigned long cs_mem_base; + int eth_gpio = 0; + + eth_cs = ZOOM2_SMSC911X_CS; + + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); + return; + } + + zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0; + zoom2_smsc911x_resources[0].end = cs_mem_base + 0xff; + + eth_gpio = ZOOM2_SMSC911X_GPIO; + + zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); + + if (gpio_request(eth_gpio, "smsc911x irq") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", + eth_gpio); + return; + } + gpio_direction_input(eth_gpio); +} + +static struct plat_serial8250_port serial_platform_data[] = { + { + .mapbase = 0x10000000, + .irq = OMAP_GPIO_IRQ(102), + .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ, + .iotype = UPIO_MEM, + .regshift = 1, + .uartclk = QUART_CLK, + }, { + .flags = 0 + } +}; + +static struct platform_device zoom2_debugboard_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = serial_platform_data, + }, +}; + +static inline void __init zoom2_init_quaduart(void) +{ + int quart_cs; + unsigned long cs_mem_base; + int quart_gpio = 0; + + quart_cs = ZOOM2_QUADUART_CS; + + if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem" + "for Quad UART(TL16CP754C)\n"); + return; + } + + quart_gpio = ZOOM2_QUADUART_GPIO; + + if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n", + quart_gpio); + return; + } + gpio_direction_input(quart_gpio); +} + +static inline int omap_zoom2_debugboard_detect(void) +{ + int debug_board_detect = 0; + + debug_board_detect = ZOOM2_SMSC911X_GPIO; + + if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug" + "board detect\n", debug_board_detect); + return 0; + } + gpio_direction_input(debug_board_detect); + + if (!gpio_get_value(debug_board_detect)) { + gpio_free(debug_board_detect); + return 0; + } + return 1; +} + +static struct platform_device *zoom2_devices[] __initdata = { + &zoom2_smsc911x_device, + &zoom2_debugboard_serial_device, +}; + +int __init omap_zoom2_debugboard_init(void) +{ + if (!omap_zoom2_debugboard_detect()) + return 0; + + zoom2_init_smsc911x(); + zoom2_init_quaduart(); + return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices)); +} diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c new file mode 100644 index 0000000..bcc0f76 --- /dev/null +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc. + * Mikkel Christensen <mlc@ti.com> + * + * Modified from mach-omap2/board-ldp.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/i2c/twl4030.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/common.h> +#include <mach/usb.h> + +#include "mmc-twl4030.h" + +static void __init omap_zoom2_init_irq(void) +{ + omap2_init_common_hw(NULL); + omap_init_irq(); + omap_gpio_init(); +} + +static struct omap_uart_config zoom2_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_board_config_kernel zoom2_config[] __initdata = { + { OMAP_TAG_UART, &zoom2_uart_config }, +}; + +static struct twl4030_gpio_platform_data zoom2_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, +}; + +static struct twl4030_platform_data zoom2_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .gpio = &zoom2_gpio_data, +}; + +static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &zoom2_twldata, + }, +}; + +static int __init omap_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo, + ARRAY_SIZE(zoom2_i2c_boardinfo)); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +static struct twl4030_hsmmc_info mmc[] __initdata = { + { + .mmc = 1, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, + {} /* Terminator */ +}; + +extern int __init omap_zoom2_debugboard_init(void); + +static void __init omap_zoom2_init(void) +{ + omap_i2c_init(); + omap_board_config = zoom2_config; + omap_board_config_size = ARRAY_SIZE(zoom2_config); + omap_serial_init(); + omap_zoom2_debugboard_init(); + twl4030_mmc_init(mmc); + usb_musb_init(); +} + +static void __init omap_zoom2_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_zoom2_map_io, + .init_irq = omap_zoom2_init_irq, + .init_machine = omap_zoom2_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 4247a15..ba528f8 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -91,9 +91,9 @@ static void _omap2xxx_clk_commit(struct clk *clk) return; prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD, - OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET); + OMAP2_PRCM_CLKCFG_CTRL_OFFSET); /* OCP barrier */ - prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET); + prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET); } /* @@ -547,8 +547,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, const struct clksel_rate *clkr; u32 last_div = 0; - printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n", - clk->name, target_rate); + pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n", + clk->name, target_rate); *new_div = 1; @@ -562,7 +562,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, /* Sanity check */ if (clkr->div <= last_div) - printk(KERN_ERR "clock: clksel_rate table not sorted " + pr_err("clock: clksel_rate table not sorted " "for clock %s", clk->name); last_div = clkr->div; @@ -574,7 +574,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, } if (!clkr->div) { - printk(KERN_ERR "clock: Could not find divisor for target " + pr_err("clock: Could not find divisor for target " "rate %ld for clock %s parent %s\n", target_rate, clk->name, clk->parent->name); return ~0; @@ -582,8 +582,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, *new_div = clkr->div; - printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div, - (clk->parent->rate / clkr->div)); + pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div, + (clk->parent->rate / clkr->div)); return (clk->parent->rate / clkr->div); } @@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk) if ((regval32 & (1 << clk->enable_bit)) == v) return; - printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name); + printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name); if (cpu_is_omap34xx()) { omap2_clk_enable(clk); omap2_clk_disable(clk); diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 1e839c5..44de027 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -60,12 +60,13 @@ struct omap_clk { }, \ } -#define CK_243X (1 << 0) -#define CK_242X (1 << 1) +#define CK_243X RATE_IN_243X +#define CK_242X RATE_IN_242X static struct omap_clk omap24xx_clks[] = { /* external root sources */ CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), + CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), @@ -102,10 +103,10 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), /* DSS domain clocks */ - CLK(NULL, "dss_ick", &dss_ick, CK_243X | CK_242X), - CLK(NULL, "dss1_fck", &dss1_fck, CK_243X | CK_242X), - CLK(NULL, "dss2_fck", &dss2_fck, CK_243X | CK_242X), - CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X | CK_242X), + CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X), + CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X), + CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X), + CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), /* L3 domain clocks */ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), @@ -205,7 +206,7 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), - CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X), + CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), @@ -232,6 +233,8 @@ static struct prcm_config *curr_prcm_set; static struct clk *vclk; static struct clk *sclk; +static void __iomem *prcm_clksrc_ctrl; + /*------------------------------------------------------------------------- * Omap24xx specific clock functions *-------------------------------------------------------------------------*/ @@ -268,10 +271,9 @@ static int omap2_enable_osc_ck(struct clk *clk) { u32 pcc; - pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL); + pcc = __raw_readl(prcm_clksrc_ctrl); - __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, - OMAP24XX_PRCM_CLKSRC_CTRL); + __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); return 0; } @@ -280,10 +282,9 @@ static void omap2_disable_osc_ck(struct clk *clk) { u32 pcc; - pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL); + pcc = __raw_readl(prcm_clksrc_ctrl); - __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, - OMAP24XX_PRCM_CLKSRC_CTRL); + __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); } static const struct clkops clkops_oscck = { @@ -653,7 +654,7 @@ static u32 omap2_get_sysclkdiv(void) { u32 div; - div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL); + div = __raw_readl(prcm_clksrc_ctrl); div &= OMAP_SYSCLKDIV_MASK; div >>= OMAP_SYSCLKDIV_SHIFT; @@ -711,30 +712,27 @@ int __init omap2_clk_init(void) { struct prcm_config *prcm; struct omap_clk *c; - u32 clkrate, cpu_mask; + u32 clkrate; - if (cpu_is_omap242x()) + if (cpu_is_omap242x()) { + prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; cpu_mask = RATE_IN_242X; - else if (cpu_is_omap2430()) + } else if (cpu_is_omap2430()) { + prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; cpu_mask = RATE_IN_243X; + } clk_init(&omap2_clk_functions); + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + clk_preinit(c->lk.clk); + osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); propagate_rate(&osc_ck); sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); propagate_rate(&sys_ck); for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - clk_init_one(c->lk.clk); - - cpu_mask = 0; - if (cpu_is_omap2420()) - cpu_mask |= CK_242X; - if (cpu_is_omap2430()) - cpu_mask |= CK_243X; - - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) if (c->cpu & cpu_mask) { clkdev_add(&c->lk); clk_register(c->lk.clk); diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 33c3e5b..458f00c 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -24,6 +24,17 @@ #include "cm-regbits-24xx.h" #include "sdrc.h" +/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */ +#ifdef CONFIG_ARCH_OMAP2420 +#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR +#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL +#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL +#else +#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR +#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL +#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL +#endif + static unsigned long omap2_table_mpu_recalc(struct clk *clk); static int omap2_select_table_rate(struct clk *clk, unsigned long rate); static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate); @@ -625,6 +636,14 @@ static struct clk func_32k_ck = { .clkdm_name = "wkup_clkdm", }; +static struct clk secure_32k_ck = { + .name = "secure_32k_ck", + .ops = &clkops_null, + .rate = 32768, + .flags = RATE_FIXED, + .clkdm_name = "wkup_clkdm", +}; + /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", @@ -1790,7 +1809,7 @@ static struct clk gpt12_ick = { static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_omap2_dflt_wait, - .parent = &func_32k_ck, + .parent = &secure_32k_ck, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 0a14dca..9e43fe5 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -129,6 +129,9 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2), CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2), CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), + CLK(NULL, "modem_fck", &modem_fck, CK_343X), + CLK(NULL, "sad2d_ick", &sad2d_ick, CK_343X), + CLK(NULL, "mad2d_ick", &mad2d_ick, CK_343X), CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X), CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X), CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2), @@ -157,7 +160,7 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X), CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X), CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick, CK_343X), + CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X), CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), @@ -197,11 +200,11 @@ static struct omap_clk omap34xx_clks[] = { CLK("omap_rng", "ick", &rng_ick, CK_343X), CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), CLK(NULL, "des1_ick", &des1_ick, CK_343X), - CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X), - CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_343X), - CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_343X), - CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_343X), - CLK(NULL, "dss_ick", &dss_ick, CK_343X), + CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X), + CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X), + CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X), + CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X), + CLK("omapfb", "ick", &dss_ick, CK_343X), CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), CLK(NULL, "cam_ick", &cam_ick, CK_343X), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), @@ -281,6 +284,8 @@ static struct omap_clk omap34xx_clks[] = { #define MAX_DPLL_WAIT_TRIES 1000000 +#define MIN_SDRC_DLL_LOCK_FREQ 83000000 + /** * omap3_dpll_recalc - recalculate DPLL rate * @clk: DPLL struct clk @@ -703,6 +708,7 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) { u32 new_div = 0; + u32 unlock_dll = 0; unsigned long validrate, sdrcrate; struct omap_sdrc_params *sp; @@ -729,17 +735,22 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) if (!sp) return -EINVAL; - pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, - validrate); - pr_info("clock: SDRC timing params used: %08x %08x %08x\n", - sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); + if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) { + pr_debug("clock: will unlock SDRC DLL\n"); + unlock_dll = 1; + } + + pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, + validrate); + pr_debug("clock: SDRC timing params used: %08x %08x %08x\n", + sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); /* REVISIT: SRAM code doesn't support other M2 divisors yet */ WARN_ON(new_div != 1 && new_div != 2); /* REVISIT: Add SDRC_MR changing to this code also */ omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, - sp->actim_ctrlb, new_div); + sp->actim_ctrlb, new_div, unlock_dll); return 0; } @@ -956,7 +967,7 @@ int __init omap2_clk_init(void) clk_init(&omap2_clk_functions); for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) - clk_init_one(c->lk.clk); + clk_preinit(c->lk.clk); for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) if (c->cpu & cpu_clkflg) { diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 70ec10d..e433aec 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -27,6 +27,8 @@ #include "prm.h" #include "prm-regbits-34xx.h" +#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR + static unsigned long omap3_dpll_recalc(struct clk *clk); static unsigned long omap3_clkoutx2_recalc(struct clk *clk); static void omap3_dpll_allow_idle(struct clk *clk); @@ -1228,6 +1230,37 @@ static struct clk d2d_26m_fck = { .recalc = &followparent_recalc, }; +static struct clk modem_fck = { + .name = "modem_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .init = &omap2_init_clk_clkdm, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MODEM_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk sad2d_ick = { + .name = "sad2d_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SAD2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mad2d_ick = { + .name = "mad2d_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), + .enable_bit = OMAP3430_EN_MAD2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + static const struct clksel omap343x_gpt_clksel[] = { { .parent = &omap_32k_fck, .rates = gpt_32k_rates }, { .parent = &sys_ck, .rates = gpt_sys_rates }, @@ -1945,8 +1978,6 @@ static struct clk usb_l4_ick = { .recalc = &omap2_clksel_recalc, }; -/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */ - /* SECURITY_L4_ICK2 based clocks */ static struct clk security_l4_ick2 = { @@ -2052,7 +2083,7 @@ static struct clk dss_ick = { static struct clk cam_mclk = { .name = "cam_mclk", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &dpll4_m5x2_ck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, @@ -2063,7 +2094,7 @@ static struct clk cam_mclk = { static struct clk cam_ick = { /* Handles both L3 and L4 clocks */ .name = "cam_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), @@ -2074,7 +2105,7 @@ static struct clk cam_ick = { static struct clk csi2_96m_fck = { .name = "csi2_96m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &core_96m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), @@ -2182,7 +2213,7 @@ static struct clk wkup_32k_fck = { static struct clk gpio1_dbck = { .name = "gpio1_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &wkup_32k_fck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO1_SHIFT, @@ -2427,7 +2458,7 @@ static struct clk per_32k_alwon_fck = { static struct clk gpio6_dbck = { .name = "gpio6_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO6_SHIFT, @@ -2437,7 +2468,7 @@ static struct clk gpio6_dbck = { static struct clk gpio5_dbck = { .name = "gpio5_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO5_SHIFT, @@ -2447,7 +2478,7 @@ static struct clk gpio5_dbck = { static struct clk gpio4_dbck = { .name = "gpio4_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO4_SHIFT, @@ -2457,7 +2488,7 @@ static struct clk gpio4_dbck = { static struct clk gpio3_dbck = { .name = "gpio3_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO3_SHIFT, @@ -2467,7 +2498,7 @@ static struct clk gpio3_dbck = { static struct clk gpio2_dbck = { .name = "gpio2_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO2_SHIFT, @@ -2901,7 +2932,6 @@ static struct clk sr_l4_ick = { /* SECURE_32K_FCK clocks */ -/* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h index 281d5da..fe319ae 100644 --- a/arch/arm/mach-omap2/clockdomains.h +++ b/arch/arm/mach-omap2/clockdomains.h @@ -195,7 +195,7 @@ static struct clockdomain sgx_clkdm = { static struct clockdomain d2d_clkdm = { .name = "d2d_clkdm", .pwrdm = { .name = "core_pwrdm" }, - .flags = CLKDM_CAN_HWSUP, + .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 6f3f5a3..6923deb 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -145,6 +145,8 @@ #define OMAP3430_CLKACTIVITY_MPU_MASK (1 << 0) /* CM_FCLKEN1_CORE specific bits */ +#define OMAP3430_EN_MODEM (1 << 31) +#define OMAP3430_EN_MODEM_SHIFT 31 /* CM_ICLKEN1_CORE specific bits */ #define OMAP3430_EN_ICR (1 << 29) @@ -161,6 +163,8 @@ #define OMAP3430_EN_MAILBOXES_SHIFT 7 #define OMAP3430_EN_OMAPCTRL (1 << 6) #define OMAP3430_EN_OMAPCTRL_SHIFT 6 +#define OMAP3430_EN_SAD2D (1 << 3) +#define OMAP3430_EN_SAD2D_SHIFT 3 #define OMAP3430_EN_SDRC (1 << 1) #define OMAP3430_EN_SDRC_SHIFT 1 @@ -176,6 +180,10 @@ #define OMAP3430_EN_DES1 (1 << 0) #define OMAP3430_EN_DES1_SHIFT 0 +/* CM_ICLKEN3_CORE */ +#define OMAP3430_EN_MAD2D_SHIFT 3 +#define OMAP3430_EN_MAD2D (1 << 3) + /* CM_FCLKEN3_CORE specific bits */ #define OMAP3430ES2_EN_TS_SHIFT 1 #define OMAP3430ES2_EN_TS_MASK (1 << 1) @@ -231,6 +239,8 @@ #define OMAP3430ES2_ST_CPEFUSE_MASK (1 << 0) /* CM_AUTOIDLE1_CORE */ +#define OMAP3430_AUTO_MODEM (1 << 31) +#define OMAP3430_AUTO_MODEM_SHIFT 31 #define OMAP3430ES2_AUTO_MMC3 (1 << 30) #define OMAP3430ES2_AUTO_MMC3_SHIFT 30 #define OMAP3430ES2_AUTO_ICR (1 << 29) @@ -287,6 +297,8 @@ #define OMAP3430_AUTO_HSOTGUSB_SHIFT 4 #define OMAP3430ES1_AUTO_D2D (1 << 3) #define OMAP3430ES1_AUTO_D2D_SHIFT 3 +#define OMAP3430_AUTO_SAD2D (1 << 3) +#define OMAP3430_AUTO_SAD2D_SHIFT 3 #define OMAP3430_AUTO_SSI (1 << 0) #define OMAP3430_AUTO_SSI_SHIFT 0 @@ -308,6 +320,8 @@ #define OMAP3430ES2_AUTO_USBTLL (1 << 2) #define OMAP3430ES2_AUTO_USBTLL_SHIFT 2 #define OMAP3430ES2_AUTO_USBTLL_MASK (1 << 2) +#define OMAP3430_AUTO_MAD2D_SHIFT 3 +#define OMAP3430_AUTO_MAD2D (1 << 3) /* CM_CLKSEL_CORE */ #define OMAP3430_CLKSEL_SSI_SHIFT 8 diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index 65fdf78..1d3c93b 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -16,17 +16,12 @@ #include "prcm-common.h" -#ifndef __ASSEMBLER__ -#define OMAP_CM_REGADDR(module, reg) \ - IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg)) -#else #define OMAP2420_CM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) #define OMAP2430_CM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) #define OMAP34XX_CM_REGADDR(module, reg) \ IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) -#endif /* * Architecture-specific global CM registers @@ -38,6 +33,7 @@ #define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010) #define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c) +#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 #define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) /* diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index d6b4b2f..894cc35 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -25,7 +25,6 @@ #include <mach/board.h> #include <mach/mux.h> #include <mach/gpio.h> -#include <mach/eac.h> #include <mach/mmc.h> #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) @@ -355,10 +354,12 @@ static void omap_init_mcspi(void) platform_device_register(&omap2_mcspi1); platform_device_register(&omap2_mcspi2); #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) - platform_device_register(&omap2_mcspi3); + if (cpu_is_omap2430() || cpu_is_omap343x()) + platform_device_register(&omap2_mcspi3); #endif #ifdef CONFIG_ARCH_OMAP3 - platform_device_register(&omap2_mcspi4); + if (cpu_is_omap343x()) + platform_device_register(&omap2_mcspi4); #endif } @@ -366,38 +367,6 @@ static void omap_init_mcspi(void) static inline void omap_init_mcspi(void) {} #endif -#ifdef CONFIG_SND_OMAP24XX_EAC - -#define OMAP2_EAC_BASE 0x48090000 - -static struct resource omap2_eac_resources[] = { - { - .start = OMAP2_EAC_BASE, - .end = OMAP2_EAC_BASE + 0x109, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap2_eac_device = { - .name = "omap24xx-eac", - .id = -1, - .num_resources = ARRAY_SIZE(omap2_eac_resources), - .resource = omap2_eac_resources, - .dev = { - .platform_data = NULL, - }, -}; - -void omap_init_eac(struct eac_platform_data *pdata) -{ - omap2_eac_device.dev.platform_data = pdata; - platform_device_register(&omap2_eac_device); -} - -#else -void omap_init_eac(struct eac_platform_data *pdata) {} -#endif - #ifdef CONFIG_OMAP_SHA1_MD5 static struct resource sha1_md5_resources[] = { { diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c new file mode 100644 index 0000000..2fd22f9 --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -0,0 +1,330 @@ +/* + * linux/arch/arm/mach-omap2/gpmc-onenand.c + * + * Copyright (C) 2006 - 2009 Nokia Corporation + * Contacts: Juha Yrjola + * Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mtd/onenand_regs.h> +#include <linux/io.h> + +#include <asm/mach/flash.h> + +#include <mach/onenand.h> +#include <mach/board.h> +#include <mach/gpmc.h> + +static struct omap_onenand_platform_data *gpmc_onenand_data; + +static struct platform_device gpmc_onenand_device = { + .name = "omap2-onenand", + .id = -1, +}; + +static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) +{ + struct gpmc_timings t; + + const int t_cer = 15; + const int t_avdp = 12; + const int t_aavdh = 7; + const int t_ce = 76; + const int t_aa = 76; + const int t_oe = 20; + const int t_cez = 20; /* max of t_cez, t_oez */ + const int t_ds = 30; + const int t_wpl = 40; + const int t_wph = 30; + + memset(&t, 0, sizeof(t)); + t.sync_clk = 0; + t.cs_on = 0; + t.adv_on = 0; + + /* Read */ + t.adv_rd_off = gpmc_round_ns_to_ticks(max_t(int, t_avdp, t_cer)); + t.oe_on = t.adv_rd_off + gpmc_round_ns_to_ticks(t_aavdh); + t.access = t.adv_on + gpmc_round_ns_to_ticks(t_aa); + t.access = max_t(int, t.access, t.cs_on + gpmc_round_ns_to_ticks(t_ce)); + t.access = max_t(int, t.access, t.oe_on + gpmc_round_ns_to_ticks(t_oe)); + t.oe_off = t.access + gpmc_round_ns_to_ticks(1); + t.cs_rd_off = t.oe_off; + t.rd_cycle = t.cs_rd_off + gpmc_round_ns_to_ticks(t_cez); + + /* Write */ + t.adv_wr_off = t.adv_rd_off; + t.we_on = t.oe_on; + if (cpu_is_omap34xx()) { + t.wr_data_mux_bus = t.we_on; + t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds); + } + t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl); + t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph); + t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez); + + /* Configure GPMC for asynchronous read */ + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, + GPMC_CONFIG1_DEVICESIZE_16 | + GPMC_CONFIG1_MUXADDDATA); + + return gpmc_cs_set_timings(cs, &t); +} + +static void set_onenand_cfg(void __iomem *onenand_base, int latency, + int sync_read, int sync_write, int hf) +{ + u32 reg; + + reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); + reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | + ONENAND_SYS_CFG1_BL_16; + if (sync_read) + reg |= ONENAND_SYS_CFG1_SYNC_READ; + else + reg &= ~ONENAND_SYS_CFG1_SYNC_READ; + if (sync_write) + reg |= ONENAND_SYS_CFG1_SYNC_WRITE; + else + reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE; + if (hf) + reg |= ONENAND_SYS_CFG1_HF; + else + reg &= ~ONENAND_SYS_CFG1_HF; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); +} + +static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, + void __iomem *onenand_base, + int freq) +{ + struct gpmc_timings t; + const int t_cer = 15; + const int t_avdp = 12; + const int t_cez = 20; /* max of t_cez, t_oez */ + const int t_ds = 30; + const int t_wpl = 40; + const int t_wph = 30; + int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; + int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; + int first_time = 0, hf = 0, sync_read = 0, sync_write = 0; + int err, ticks_cez; + int cs = cfg->cs; + u32 reg; + + if (cfg->flags & ONENAND_SYNC_READ) { + sync_read = 1; + } else if (cfg->flags & ONENAND_SYNC_READWRITE) { + sync_read = 1; + sync_write = 1; + } + + if (!freq) { + /* Very first call freq is not known */ + err = omap2_onenand_set_async_mode(cs, onenand_base); + if (err) + return err; + reg = readw(onenand_base + ONENAND_REG_VERSION_ID); + switch ((reg >> 4) & 0xf) { + case 0: + freq = 40; + break; + case 1: + freq = 54; + break; + case 2: + freq = 66; + break; + case 3: + freq = 83; + break; + case 4: + freq = 104; + break; + default: + freq = 54; + break; + } + first_time = 1; + } + + switch (freq) { + case 83: + min_gpmc_clk_period = 12; /* 83 MHz */ + t_ces = 5; + t_avds = 4; + t_avdh = 2; + t_ach = 6; + t_aavdh = 6; + t_rdyo = 9; + break; + case 66: + min_gpmc_clk_period = 15; /* 66 MHz */ + t_ces = 6; + t_avds = 5; + t_avdh = 2; + t_ach = 6; + t_aavdh = 6; + t_rdyo = 11; + break; + default: + min_gpmc_clk_period = 18; /* 54 MHz */ + t_ces = 7; + t_avds = 7; + t_avdh = 7; + t_ach = 9; + t_aavdh = 7; + t_rdyo = 15; + sync_write = 0; + break; + } + + tick_ns = gpmc_ticks_to_ns(1); + div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period); + gpmc_clk_ns = gpmc_ticks_to_ns(div); + if (gpmc_clk_ns < 15) /* >66Mhz */ + hf = 1; + if (hf) + latency = 6; + else if (gpmc_clk_ns >= 25) /* 40 MHz*/ + latency = 3; + else + latency = 4; + + if (first_time) + set_onenand_cfg(onenand_base, latency, + sync_read, sync_write, hf); + + if (div == 1) { + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2); + reg |= (1 << 7); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg); + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3); + reg |= (1 << 7); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg); + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4); + reg |= (1 << 7); + reg |= (1 << 23); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg); + } else { + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2); + reg &= ~(1 << 7); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg); + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3); + reg &= ~(1 << 7); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg); + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4); + reg &= ~(1 << 7); + reg &= ~(1 << 23); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg); + } + + /* Set synchronous read timings */ + memset(&t, 0, sizeof(t)); + t.sync_clk = min_gpmc_clk_period; + t.cs_on = 0; + t.adv_on = 0; + fclk_offset_ns = gpmc_round_ns_to_ticks(max_t(int, t_ces, t_avds)); + fclk_offset = gpmc_ns_to_ticks(fclk_offset_ns); + t.page_burst_access = gpmc_clk_ns; + + /* Read */ + t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh)); + t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach)); + t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div); + t.oe_off = t.access + gpmc_round_ns_to_ticks(1); + t.cs_rd_off = t.oe_off; + ticks_cez = ((gpmc_ns_to_ticks(t_cez) + div - 1) / div) * div; + t.rd_cycle = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div + + ticks_cez); + + /* Write */ + if (sync_write) { + t.adv_wr_off = t.adv_rd_off; + t.we_on = 0; + t.we_off = t.cs_rd_off; + t.cs_wr_off = t.cs_rd_off; + t.wr_cycle = t.rd_cycle; + if (cpu_is_omap34xx()) { + t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset + + gpmc_ns_to_ticks(min_gpmc_clk_period + + t_rdyo)); + t.wr_access = t.access; + } + } else { + t.adv_wr_off = gpmc_round_ns_to_ticks(max_t(int, + t_avdp, t_cer)); + t.we_on = t.adv_wr_off + gpmc_round_ns_to_ticks(t_aavdh); + t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl); + t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph); + t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez); + if (cpu_is_omap34xx()) { + t.wr_data_mux_bus = t.we_on; + t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds); + } + } + + /* Configure GPMC for synchronous read */ + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, + GPMC_CONFIG1_WRAPBURST_SUPP | + GPMC_CONFIG1_READMULTIPLE_SUPP | + (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) | + (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) | + (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) | + GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) | + GPMC_CONFIG1_PAGE_LEN(2) | + (cpu_is_omap34xx() ? 0 : + (GPMC_CONFIG1_WAIT_READ_MON | + GPMC_CONFIG1_WAIT_PIN_SEL(0))) | + GPMC_CONFIG1_DEVICESIZE_16 | + GPMC_CONFIG1_DEVICETYPE_NOR | + GPMC_CONFIG1_MUXADDDATA); + + err = gpmc_cs_set_timings(cs, &t); + if (err) + return err; + + set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf); + + return 0; +} + +static int gpmc_onenand_setup(void __iomem *onenand_base, int freq) +{ + struct device *dev = &gpmc_onenand_device.dev; + + /* Set sync timings in GPMC */ + if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base, + freq) < 0) { + dev_err(dev, "Unable to set synchronous mode\n"); + return -EINVAL; + } + + return 0; +} + +void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) +{ + gpmc_onenand_data = _onenand_data; + gpmc_onenand_data->onenand_setup = gpmc_onenand_setup; + gpmc_onenand_device.dev.platform_data = gpmc_onenand_data; + + if (cpu_is_omap24xx() && + (gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) { + printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n"); + gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE; + gpmc_onenand_data->flags |= ONENAND_SYNC_READ; + } + + if (platform_device_register(&gpmc_onenand_device) < 0) { + printk(KERN_ERR "Unable to register OneNAND device\n"); + return; + } +} diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c new file mode 100644 index 0000000..df99d31 --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -0,0 +1,189 @@ +/* + * linux/arch/arm/mach-omap2/gpmc-smc91x.c + * + * Copyright (C) 2009 Nokia Corporation + * Contact: Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/smc91x.h> + +#include <mach/board.h> +#include <mach/gpmc.h> +#include <mach/gpmc-smc91x.h> + +static struct omap_smc91x_platform_data *gpmc_cfg; + +static struct resource gpmc_smc91x_resources[] = { + [0] = { + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smc91x_platdata gpmc_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, +}; + +static struct platform_device gpmc_smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), + .resource = gpmc_smc91x_resources, + .dev = { + .platform_data = &gpmc_smc91x_info, + }, +}; + +/* + * Set the gpmc timings for smc91c96. The timings are taken + * from the data sheet available at: + * http://www.smsc.com/main/catalog/lan91c96.html + * REVISIT: Level shifters can add at least to the access latency. + */ +static int smc91c96_gpmc_retime(void) +{ + struct gpmc_timings t; + const int t3 = 10; /* Figure 12.2 read and 12.4 write */ + const int t4_r = 20; /* Figure 12.2 read */ + const int t4_w = 5; /* Figure 12.4 write */ + const int t5 = 25; /* Figure 12.2 read */ + const int t6 = 15; /* Figure 12.2 read */ + const int t7 = 5; /* Figure 12.4 write */ + const int t8 = 5; /* Figure 12.4 write */ + const int t20 = 185; /* Figure 12.2 read and 12.4 write */ + u32 l; + + memset(&t, 0, sizeof(t)); + + /* Read timings */ + t.cs_on = 0; + t.adv_on = t.cs_on; + t.oe_on = t.adv_on + t3; + t.access = t.oe_on + t5; + t.oe_off = t.access; + t.adv_rd_off = t.oe_off + max(t4_r, t6); + t.cs_rd_off = t.oe_off; + t.rd_cycle = t20 - t.oe_on; + + /* Write timings */ + t.we_on = t.adv_on + t3; + + if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) { + t.wr_data_mux_bus = t.we_on; + t.we_off = t.wr_data_mux_bus + t7; + } else + t.we_off = t.we_on + t7; + if (cpu_is_omap34xx()) + t.wr_access = t.we_off; + t.adv_wr_off = t.we_off + max(t4_w, t8); + t.cs_wr_off = t.we_off + t4_w; + t.wr_cycle = t20 - t.we_on; + + l = GPMC_CONFIG1_DEVICESIZE_16; + if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) + l |= GPMC_CONFIG1_MUXADDDATA; + if (gpmc_cfg->flags & GPMC_READ_MON) + l |= GPMC_CONFIG1_WAIT_READ_MON; + if (gpmc_cfg->flags & GPMC_WRITE_MON) + l |= GPMC_CONFIG1_WAIT_WRITE_MON; + if (gpmc_cfg->wait_pin) + l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin); + gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l); + + /* + * FIXME: Calculate the address and data bus muxed timings. + * Note that at least adv_rd_off needs to be changed according + * to omap3430 TRM Figure 11-11. Are the sdp boards using the + * FPGA in between smc91x and omap as the timings are different + * from above? + */ + if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) + return 0; + + return gpmc_cs_set_timings(gpmc_cfg->cs, &t); +} + +/* + * Initialize smc91x device connected to the GPMC. Note that we + * assume that pin multiplexing is done in the board-*.c file, + * or in the bootloader. + */ +void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) +{ + unsigned long cs_mem_base; + int ret; + + gpmc_cfg = board_data; + + if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96) + gpmc_cfg->retime = smc91c96_gpmc_retime; + + if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); + return; + } + + gpmc_smc91x_resources[0].start = cs_mem_base + 0x300; + gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f; + gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK); + + if (gpmc_cfg->retime) { + ret = gpmc_cfg->retime(); + if (ret != 0) + goto free1; + } + + if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0) + goto free1; + + gpio_direction_input(gpmc_cfg->gpio_irq); + gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); + + if (gpmc_cfg->gpio_pwrdwn) { + ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown"); + if (ret) + goto free2; + gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0); + } + + if (gpmc_cfg->gpio_reset) { + ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset"); + if (ret) + goto free3; + + gpio_direction_output(gpmc_cfg->gpio_reset, 0); + gpio_set_value(gpmc_cfg->gpio_reset, 1); + msleep(100); + gpio_set_value(gpmc_cfg->gpio_reset, 0); + } + + if (platform_device_register(&gpmc_smc91x_device) < 0) { + printk(KERN_ERR "Unable to register smc91x device\n"); + gpio_free(gpmc_cfg->gpio_reset); + goto free3; + } + + return; + +free3: + if (gpmc_cfg->gpio_pwrdwn) + gpio_free(gpmc_cfg->gpio_pwrdwn); +free2: + gpio_free(gpmc_cfg->gpio_irq); +free1: + gpmc_cs_free(gpmc_cfg->cs); + + printk(KERN_ERR "Could not initialize smc91x\n"); +} diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 2249049..f91934b 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -5,6 +5,9 @@ * * Author: Juha Yrjola * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -424,6 +427,9 @@ void __init gpmc_init(void) } else if (cpu_is_omap34xx()) { ck = "gpmc_fck"; l = OMAP34XX_GPMC_BASE; + } else if (cpu_is_omap44xx()) { + ck = "gpmc_fck"; + l = OMAP44XX_GPMC_BASE; } gpmc_l3_clk = clk_get(NULL, ck); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 34b5914..458990e 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -6,6 +6,9 @@ * Copyright (C) 2005 Nokia Corporation * Written by Tony Lindgren <tony@atomide.com> * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -200,7 +203,10 @@ void __init omap2_check_revision(void) omap24xx_check_revision(); else if (cpu_is_omap34xx()) omap34xx_check_revision(); - else + else if (cpu_is_omap44xx()) { + printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n"); + return; + } else pr_err("OMAP revision unknown, please fix!\n"); /* diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 916fcd3..32afd94 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -4,12 +4,14 @@ * OMAP2 I/O mapping code * * Copyright (C) 2005 Nokia Corporation - * Copyright (C) 2007 Texas Instruments + * Copyright (C) 2007-2009 Texas Instruments * * Author: * Juha Yrjola <juha.yrjola@nokia.com> * Syed Khasim <x0khasim@ti.com> * + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -30,6 +32,7 @@ #include <mach/sdrc.h> #include <mach/gpmc.h> +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ #include "clock.h" #include <mach/powerdomain.h> @@ -38,7 +41,7 @@ #include <mach/clockdomain.h> #include "clockdomains.h" - +#endif /* * The machine specific code may provide the extra mapping besides the * default mapping provided here. @@ -166,6 +169,46 @@ static struct map_desc omap34xx_io_desc[] __initdata = { }, }; #endif +#ifdef CONFIG_ARCH_OMAP4 +static struct map_desc omap44xx_io_desc[] __initdata = { + { + .virtual = L3_44XX_VIRT, + .pfn = __phys_to_pfn(L3_44XX_PHYS), + .length = L3_44XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_44XX_VIRT, + .pfn = __phys_to_pfn(L4_44XX_PHYS), + .length = L4_44XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_WK_44XX_VIRT, + .pfn = __phys_to_pfn(L4_WK_44XX_PHYS), + .length = L4_WK_44XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = OMAP44XX_GPMC_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS), + .length = OMAP44XX_GPMC_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_PER_44XX_VIRT, + .pfn = __phys_to_pfn(L4_PER_44XX_PHYS), + .length = L4_PER_44XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_EMU_44XX_VIRT, + .pfn = __phys_to_pfn(L4_EMU_44XX_PHYS), + .length = L4_EMU_44XX_SIZE, + .type = MT_DEVICE, + }, +}; +#endif void __init omap2_map_common_io(void) { @@ -183,6 +226,9 @@ void __init omap2_map_common_io(void) iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc)); #endif +#if defined(CONFIG_ARCH_OMAP4) + iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); +#endif /* Normally devicemaps_init() would flush caches and tlb after * mdesc->map_io(), but we must also do it here because of the CPU * revision check below. @@ -198,9 +244,11 @@ void __init omap2_map_common_io(void) void __init omap2_init_common_hw(struct omap_sdrc_params *sp) { omap2_mux_init(); +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */ pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); omap2_sdrc_init(sp); +#endif gpmc_init(); } diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c new file mode 100644 index 0000000..015f22a --- /dev/null +++ b/arch/arm/mach-omap2/iommu2.c @@ -0,0 +1,323 @@ +/* + * omap iommu: omap2/3 architecture specific functions + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, + * Paul Mundt and Toshihiro Kobayashi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/stringify.h> + +#include <mach/iommu.h> + +/* + * omap2 architecture specific register bit definitions + */ +#define IOMMU_ARCH_VERSION 0x00000011 + +/* SYSCONF */ +#define MMU_SYS_IDLE_SHIFT 3 +#define MMU_SYS_IDLE_FORCE (0 << MMU_SYS_IDLE_SHIFT) +#define MMU_SYS_IDLE_NONE (1 << MMU_SYS_IDLE_SHIFT) +#define MMU_SYS_IDLE_SMART (2 << MMU_SYS_IDLE_SHIFT) +#define MMU_SYS_IDLE_MASK (3 << MMU_SYS_IDLE_SHIFT) + +#define MMU_SYS_SOFTRESET (1 << 1) +#define MMU_SYS_AUTOIDLE 1 + +/* SYSSTATUS */ +#define MMU_SYS_RESETDONE 1 + +/* IRQSTATUS & IRQENABLE */ +#define MMU_IRQ_MULTIHITFAULT (1 << 4) +#define MMU_IRQ_TABLEWALKFAULT (1 << 3) +#define MMU_IRQ_EMUMISS (1 << 2) +#define MMU_IRQ_TRANSLATIONFAULT (1 << 1) +#define MMU_IRQ_TLBMISS (1 << 0) +#define MMU_IRQ_MASK \ + (MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \ + MMU_IRQ_TRANSLATIONFAULT) + +/* MMU_CNTL */ +#define MMU_CNTL_SHIFT 1 +#define MMU_CNTL_MASK (7 << MMU_CNTL_SHIFT) +#define MMU_CNTL_EML_TLB (1 << 3) +#define MMU_CNTL_TWL_EN (1 << 2) +#define MMU_CNTL_MMU_EN (1 << 1) + +#define get_cam_va_mask(pgsz) \ + (((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 : \ + ((pgsz) == MMU_CAM_PGSZ_1M) ? 0xfff00000 : \ + ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \ + ((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0) + +static int omap2_iommu_enable(struct iommu *obj) +{ + u32 l, pa; + unsigned long timeout; + + if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K)) + return -EINVAL; + + pa = virt_to_phys(obj->iopgd); + if (!IS_ALIGNED(pa, SZ_16K)) + return -EINVAL; + + iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG); + + timeout = jiffies + msecs_to_jiffies(20); + do { + l = iommu_read_reg(obj, MMU_SYSSTATUS); + if (l & MMU_SYS_RESETDONE) + break; + } while (time_after(jiffies, timeout)); + + if (!(l & MMU_SYS_RESETDONE)) { + dev_err(obj->dev, "can't take mmu out of reset\n"); + return -ENODEV; + } + + l = iommu_read_reg(obj, MMU_REVISION); + dev_info(obj->dev, "%s: version %d.%d\n", obj->name, + (l >> 4) & 0xf, l & 0xf); + + l = iommu_read_reg(obj, MMU_SYSCONFIG); + l &= ~MMU_SYS_IDLE_MASK; + l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE); + iommu_write_reg(obj, l, MMU_SYSCONFIG); + + iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE); + iommu_write_reg(obj, pa, MMU_TTB); + + l = iommu_read_reg(obj, MMU_CNTL); + l &= ~MMU_CNTL_MASK; + l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN); + iommu_write_reg(obj, l, MMU_CNTL); + + return 0; +} + +static void omap2_iommu_disable(struct iommu *obj) +{ + u32 l = iommu_read_reg(obj, MMU_CNTL); + + l &= ~MMU_CNTL_MASK; + iommu_write_reg(obj, l, MMU_CNTL); + iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG); + + dev_dbg(obj->dev, "%s is shutting down\n", obj->name); +} + +static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra) +{ + int i; + u32 stat, da; + const char *err_msg[] = { + "tlb miss", + "translation fault", + "emulation miss", + "table walk fault", + "multi hit fault", + }; + + stat = iommu_read_reg(obj, MMU_IRQSTATUS); + stat &= MMU_IRQ_MASK; + if (!stat) + return 0; + + da = iommu_read_reg(obj, MMU_FAULT_AD); + *ra = da; + + dev_err(obj->dev, "%s:\tda:%08x ", __func__, da); + + for (i = 0; i < ARRAY_SIZE(err_msg); i++) { + if (stat & (1 << i)) + printk("%s ", err_msg[i]); + } + printk("\n"); + + iommu_write_reg(obj, stat, MMU_IRQSTATUS); + return stat; +} + +static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr) +{ + cr->cam = iommu_read_reg(obj, MMU_READ_CAM); + cr->ram = iommu_read_reg(obj, MMU_READ_RAM); +} + +static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr) +{ + iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM); + iommu_write_reg(obj, cr->ram, MMU_RAM); +} + +static u32 omap2_cr_to_virt(struct cr_regs *cr) +{ + u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK; + u32 mask = get_cam_va_mask(cr->cam & page_size); + + return cr->cam & mask; +} + +static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e) +{ + struct cr_regs *cr; + + if (e->da & ~(get_cam_va_mask(e->pgsz))) { + dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__, + e->da); + return ERR_PTR(-EINVAL); + } + + cr = kmalloc(sizeof(*cr), GFP_KERNEL); + if (!cr) + return ERR_PTR(-ENOMEM); + + cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz; + cr->ram = e->pa | e->endian | e->elsz | e->mixed; + + return cr; +} + +static inline int omap2_cr_valid(struct cr_regs *cr) +{ + return cr->cam & MMU_CAM_V; +} + +static u32 omap2_get_pte_attr(struct iotlb_entry *e) +{ + u32 attr; + + attr = e->mixed << 5; + attr |= e->endian; + attr |= e->elsz >> 3; + attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6); + + return attr; +} + +static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf) +{ + char *p = buf; + + /* FIXME: Need more detail analysis of cam/ram */ + p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram); + + return p - buf; +} + +#define pr_reg(name) \ + p += sprintf(p, "%20s: %08x\n", \ + __stringify(name), iommu_read_reg(obj, MMU_##name)); + +static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf) +{ + char *p = buf; + + pr_reg(REVISION); + pr_reg(SYSCONFIG); + pr_reg(SYSSTATUS); + pr_reg(IRQSTATUS); + pr_reg(IRQENABLE); + pr_reg(WALKING_ST); + pr_reg(CNTL); + pr_reg(FAULT_AD); + pr_reg(TTB); + pr_reg(LOCK); + pr_reg(LD_TLB); + pr_reg(CAM); + pr_reg(RAM); + pr_reg(GFLUSH); + pr_reg(FLUSH_ENTRY); + pr_reg(READ_CAM); + pr_reg(READ_RAM); + pr_reg(EMU_FAULT_AD); + + return p - buf; +} + +static void omap2_iommu_save_ctx(struct iommu *obj) +{ + int i; + u32 *p = obj->ctx; + + for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { + p[i] = iommu_read_reg(obj, i * sizeof(u32)); + dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); + } + + BUG_ON(p[0] != IOMMU_ARCH_VERSION); +} + +static void omap2_iommu_restore_ctx(struct iommu *obj) +{ + int i; + u32 *p = obj->ctx; + + for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { + iommu_write_reg(obj, p[i], i * sizeof(u32)); + dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); + } + + BUG_ON(p[0] != IOMMU_ARCH_VERSION); +} + +static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e) +{ + e->da = cr->cam & MMU_CAM_VATAG_MASK; + e->pa = cr->ram & MMU_RAM_PADDR_MASK; + e->valid = cr->cam & MMU_CAM_V; + e->pgsz = cr->cam & MMU_CAM_PGSZ_MASK; + e->endian = cr->ram & MMU_RAM_ENDIAN_MASK; + e->elsz = cr->ram & MMU_RAM_ELSZ_MASK; + e->mixed = cr->ram & MMU_RAM_MIXED; +} + +static const struct iommu_functions omap2_iommu_ops = { + .version = IOMMU_ARCH_VERSION, + + .enable = omap2_iommu_enable, + .disable = omap2_iommu_disable, + .fault_isr = omap2_iommu_fault_isr, + + .tlb_read_cr = omap2_tlb_read_cr, + .tlb_load_cr = omap2_tlb_load_cr, + + .cr_to_e = omap2_cr_to_e, + .cr_to_virt = omap2_cr_to_virt, + .alloc_cr = omap2_alloc_cr, + .cr_valid = omap2_cr_valid, + .dump_cr = omap2_dump_cr, + + .get_pte_attr = omap2_get_pte_attr, + + .save_ctx = omap2_iommu_save_ctx, + .restore_ctx = omap2_iommu_restore_ctx, + .dump_ctx = omap2_iommu_dump_ctx, +}; + +static int __init omap2_iommu_init(void) +{ + return install_iommu_arch(&omap2_iommu_ops); +} +module_init(omap2_iommu_init); + +static void __exit omap2_iommu_exit(void) +{ + uninstall_iommu_arch(&omap2_iommu_ops); +} +module_exit(omap2_iommu_exit); + +MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi"); +MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 9ba20d9..b828638 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -28,7 +28,6 @@ #define INTC_MIR_CLEAR0 0x0088 #define INTC_MIR_SET0 0x008c #define INTC_PENDING_IRQ0 0x0098 - /* Number of IRQ state bits in each MIR register */ #define IRQ_BITS_PER_REG 32 @@ -73,9 +72,9 @@ static int omap_check_spurious(unsigned int irq) u32 sir, spurious; sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR); - spurious = sir >> 6; + spurious = sir >> 7; - if (spurious > 1) { + if (spurious) { printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush " "posted write for irq %i\n", irq, sir, previous_irq); @@ -134,7 +133,6 @@ static struct irq_chip omap_irq_chip = { .ack = omap_mask_ack_irq, .mask = omap_mask_irq, .unmask = omap_unmask_irq, - .disable = omap_mask_irq, }; static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) @@ -157,6 +155,22 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG); } +int omap_irq_pending(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { + struct omap_irq_bank *bank = irq_banks + i; + int irq; + + for (irq = 0; irq < bank->nr_irqs; irq += 32) + if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 + + ((irq >> 5) << 5))) + return 1; + } + return 0; +} + void __init omap_init_irq(void) { unsigned long nr_of_irqs = 0; diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index dc40b3e..9756a87 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -16,8 +16,8 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/gpio.h> -#include <linux/i2c/twl4030.h> -#include <linux/regulator/machine.h> +#include <linux/mmc/host.h> +#include <linux/regulator/consumer.h> #include <mach/hardware.h> #include <mach/control.h> @@ -26,31 +26,9 @@ #include "mmc-twl4030.h" -#if defined(CONFIG_TWL4030_CORE) && \ - (defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)) -#define LDO_CLR 0x00 -#define VSEL_S2_CLR 0x40 - -#define VMMC1_DEV_GRP 0x27 -#define VMMC1_CLR 0x00 -#define VMMC1_315V 0x03 -#define VMMC1_300V 0x02 -#define VMMC1_285V 0x01 -#define VMMC1_185V 0x00 -#define VMMC1_DEDICATED 0x2A - -#define VMMC2_DEV_GRP 0x2B -#define VMMC2_CLR 0x40 -#define VMMC2_315V 0x0c -#define VMMC2_300V 0x0b -#define VMMC2_285V 0x0a -#define VMMC2_280V 0x09 -#define VMMC2_260V 0x08 -#define VMMC2_185V 0x06 -#define VMMC2_DEDICATED 0x2E - -#define VMMC_DEV_GRP_P1 0x20 +#if defined(CONFIG_REGULATOR) && \ + (defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)) static u16 control_pbias_offset; static u16 control_devconf1_offset; @@ -59,19 +37,16 @@ static u16 control_devconf1_offset; static struct twl_mmc_controller { struct omap_mmc_platform_data *mmc; - u8 twl_vmmc_dev_grp; - u8 twl_mmc_dedicated; - char name[HSMMC_NAME_LEN + 1]; -} hsmmc[OMAP34XX_NR_MMC] = { - { - .twl_vmmc_dev_grp = VMMC1_DEV_GRP, - .twl_mmc_dedicated = VMMC1_DEDICATED, - }, - { - .twl_vmmc_dev_grp = VMMC2_DEV_GRP, - .twl_mmc_dedicated = VMMC2_DEDICATED, - }, -}; + /* Vcc == configured supply + * Vcc_alt == optional + * - MMC1, supply for DAT4..DAT7 + * - MMC2/MMC2, external level shifter voltage supply, for + * chip (SDIO, eMMC, etc) or transceiver (MMC2 only) + */ + struct regulator *vcc; + struct regulator *vcc_aux; + char name[HSMMC_NAME_LEN + 1]; +} hsmmc[OMAP34XX_NR_MMC]; static int twl_mmc_card_detect(int irq) { @@ -117,16 +92,60 @@ static int twl_mmc_late_init(struct device *dev) int ret = 0; int i; - ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd"); - if (ret) - goto done; - ret = gpio_direction_input(mmc->slots[0].switch_pin); - if (ret) - goto err; + /* MMC/SD/SDIO doesn't require a card detect switch */ + if (gpio_is_valid(mmc->slots[0].switch_pin)) { + ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd"); + if (ret) + goto done; + ret = gpio_direction_input(mmc->slots[0].switch_pin); + if (ret) + goto err; + } + /* require at least main regulator */ for (i = 0; i < ARRAY_SIZE(hsmmc); i++) { if (hsmmc[i].name == mmc->slots[0].name) { + struct regulator *reg; + hsmmc[i].mmc = mmc; + + reg = regulator_get(dev, "vmmc"); + if (IS_ERR(reg)) { + dev_dbg(dev, "vmmc regulator missing\n"); + /* HACK: until fixed.c regulator is usable, + * we don't require a main regulator + * for MMC2 or MMC3 + */ + if (i != 0) + break; + ret = PTR_ERR(reg); + goto err; + } + hsmmc[i].vcc = reg; + mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg); + + /* allow an aux regulator */ + reg = regulator_get(dev, "vmmc_aux"); + hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg; + + /* UGLY HACK: workaround regulator framework bugs. + * When the bootloader leaves a supply active, it's + * initialized with zero usecount ... and we can't + * disable it without first enabling it. Until the + * framework is fixed, we need a workaround like this + * (which is safe for MMC, but not in general). + */ + if (regulator_is_enabled(hsmmc[i].vcc) > 0) { + regulator_enable(hsmmc[i].vcc); + regulator_disable(hsmmc[i].vcc); + } + if (hsmmc[i].vcc_aux) { + if (regulator_is_enabled(reg) > 0) { + regulator_enable(reg); + regulator_disable(reg); + } + } + break; } } @@ -173,96 +192,6 @@ static int twl_mmc_resume(struct device *dev, int slot) #define twl_mmc_resume NULL #endif -/* - * Sets the MMC voltage in twl4030 - */ - -#define MMC1_OCR (MMC_VDD_165_195 \ - |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32) -#define MMC2_OCR (MMC_VDD_165_195 \ - |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \ - |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32) - -static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd) -{ - int ret; - u8 vmmc = 0, dev_grp_val; - - if (!vdd) - goto doit; - - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) { - /* VMMC1: max 220 mA. And for 8-bit mode, - * VSIM: max 50 mA - */ - switch (1 << vdd) { - case MMC_VDD_165_195: - vmmc = VMMC1_185V; - /* and VSIM_180V */ - break; - case MMC_VDD_28_29: - vmmc = VMMC1_285V; - /* and VSIM_280V */ - break; - case MMC_VDD_29_30: - case MMC_VDD_30_31: - vmmc = VMMC1_300V; - /* and VSIM_300V */ - break; - case MMC_VDD_31_32: - vmmc = VMMC1_315V; - /* error if VSIM needed */ - break; - default: - return -EINVAL; - } - } else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) { - /* VMMC2: max 100 mA */ - switch (1 << vdd) { - case MMC_VDD_165_195: - vmmc = VMMC2_185V; - break; - case MMC_VDD_25_26: - case MMC_VDD_26_27: - vmmc = VMMC2_260V; - break; - case MMC_VDD_27_28: - vmmc = VMMC2_280V; - break; - case MMC_VDD_28_29: - vmmc = VMMC2_285V; - break; - case MMC_VDD_29_30: - case MMC_VDD_30_31: - vmmc = VMMC2_300V; - break; - case MMC_VDD_31_32: - vmmc = VMMC2_315V; - break; - default: - return -EINVAL; - } - } else { - return -EINVAL; - } - -doit: - if (vdd) - dev_grp_val = VMMC_DEV_GRP_P1; /* Power up */ - else - dev_grp_val = LDO_CLR; /* Power down */ - - ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - dev_grp_val, c->twl_vmmc_dev_grp); - if (ret || !vdd) - return ret; - - ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - vmmc, c->twl_mmc_dedicated); - - return ret; -} - static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, int vdd) { @@ -273,11 +202,13 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, /* * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the - * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both + * card with Vcc regulator (from twl4030 or whatever). OMAP has both * 1.8V and 3.0V modes, controlled by the PBIAS register. * * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which * is most naturally TWL VSIM; those pins also use PBIAS. + * + * FIXME handle VMMC1A as needed ... */ if (power_on) { if (cpu_is_omap2430()) { @@ -300,7 +231,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, reg &= ~OMAP2_PBIASLITEPWRDNZ0; omap_ctrl_writel(reg, control_pbias_offset); - ret = twl_mmc_set_voltage(c, vdd); + ret = mmc_regulator_set_ocr(c->vcc, vdd); /* 100ms delay required for PBIAS configuration */ msleep(100); @@ -316,7 +247,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, reg &= ~OMAP2_PBIASLITEPWRDNZ0; omap_ctrl_writel(reg, control_pbias_offset); - ret = twl_mmc_set_voltage(c, 0); + ret = mmc_regulator_set_ocr(c->vcc, 0); /* 100ms delay required for PBIAS configuration */ msleep(100); @@ -329,19 +260,33 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, return ret; } -static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd) +static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd) { - int ret; + int ret = 0; struct twl_mmc_controller *c = &hsmmc[1]; struct omap_mmc_platform_data *mmc = dev->platform_data; + /* If we don't see a Vcc regulator, assume it's a fixed + * voltage always-on regulator. + */ + if (!c->vcc) + return 0; + /* - * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP + * Assume Vcc regulator is used only to power the card ... OMAP * VDDS is used to power the pins, optionally with a transceiver to * support cards using voltages other than VDDS (1.8V nominal). When a * transceiver is used, DAT3..7 are muxed as transceiver control pins. + * + * In some cases this regulator won't support enable/disable; + * e.g. it's a fixed rail for a WLAN chip. + * + * In other cases vcc_aux switches interface power. Example, for + * eMMC cards it represents VccQ. Sometimes transceivers or SDIO + * chips/cards need an interface voltage rail too. */ if (power_on) { + /* only MMC2 supports a CLKIN */ if (mmc->slots[0].internal_clock) { u32 reg; @@ -349,24 +294,23 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd reg |= OMAP2_MMCSDIO2ADPCLKISEL; omap_ctrl_writel(reg, control_devconf1_offset); } - ret = twl_mmc_set_voltage(c, vdd); + ret = mmc_regulator_set_ocr(c->vcc, vdd); + /* enable interface voltage rail, if needed */ + if (ret == 0 && c->vcc_aux) { + ret = regulator_enable(c->vcc_aux); + if (ret < 0) + ret = mmc_regulator_set_ocr(c->vcc, 0); + } } else { - ret = twl_mmc_set_voltage(c, 0); + if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0) + ret = regulator_disable(c->vcc_aux); + if (ret == 0) + ret = mmc_regulator_set_ocr(c->vcc, 0); } return ret; } -static int twl_mmc3_set_power(struct device *dev, int slot, int power_on, - int vdd) -{ - /* - * Assume MMC3 has self-powered device connected, for example on-board - * chip with external power source. - */ - return 0; -} - static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata; void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) @@ -412,10 +356,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) mmc->slots[0].wires = c->wires; mmc->slots[0].internal_clock = !c->ext_clock; mmc->dma_mask = 0xffffffff; + mmc->init = twl_mmc_late_init; - /* note: twl4030 card detect GPIOs normally switch VMMCx ... */ + /* note: twl4030 card detect GPIOs can disable VMMCx ... */ if (gpio_is_valid(c->gpio_cd)) { - mmc->init = twl_mmc_late_init; mmc->cleanup = twl_mmc_cleanup; mmc->suspend = twl_mmc_suspend; mmc->resume = twl_mmc_resume; @@ -439,26 +383,28 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) } else mmc->slots[0].gpio_wp = -EINVAL; - /* NOTE: we assume OMAP's MMC1 and MMC2 use - * the TWL4030's VMMC1 and VMMC2, respectively; - * and that MMC3 device has it's own power source. + /* NOTE: MMC slots should have a Vcc regulator set up. + * This may be from a TWL4030-family chip, another + * controllable regulator, or a fixed supply. + * + * temporary HACK: ocr_mask instead of fixed supply */ + mmc->slots[0].ocr_mask = c->ocr_mask; switch (c->mmc) { case 1: + /* on-chip level shifting via PBIAS0/PBIAS1 */ mmc->slots[0].set_power = twl_mmc1_set_power; - mmc->slots[0].ocr_mask = MMC1_OCR; break; case 2: - mmc->slots[0].set_power = twl_mmc2_set_power; - if (c->transceiver) - mmc->slots[0].ocr_mask = MMC2_OCR; - else - mmc->slots[0].ocr_mask = MMC_VDD_165_195; - break; + if (c->ext_clock) + c->transceiver = 1; + if (c->transceiver && c->wires > 4) + c->wires = 4; + /* FALLTHROUGH */ case 3: - mmc->slots[0].set_power = twl_mmc3_set_power; - mmc->slots[0].ocr_mask = MMC_VDD_165_195; + /* off-chip level shifting, or none */ + mmc->slots[0].set_power = twl_mmc23_set_power; break; default: pr_err("MMC%d configuration not supported!\n", c->mmc); diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h index ea59e86..3807c45 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.h +++ b/arch/arm/mach-omap2/mmc-twl4030.h @@ -16,9 +16,10 @@ struct twl4030_hsmmc_info { int gpio_wp; /* or -EINVAL */ char *name; /* or NULL for default */ struct device *dev; /* returned: pointer to mmc adapter */ + int ocr_mask; /* temporary HACK */ }; -#if defined(CONFIG_TWL4030_CORE) && \ +#if defined(CONFIG_REGULATOR) && \ (defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)) diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S new file mode 100644 index 0000000..4afadba --- /dev/null +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -0,0 +1,46 @@ +/* + * Secondary CPU startup routine source file. + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Author: + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Interface functions needed for the SMP. This file is based on arm + * realview smp platform. + * Copyright (c) 2003 ARM Limited. + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <linux/init.h> + +/* Physical address needed since MMU not enabled yet on secondary core */ +#define OMAP4_AUX_CORE_BOOT1_PA 0x48281804 + + __INIT + +/* + * OMAP4 specific entry point for secondary CPU to jump from ROM + * code. This routine also provides a holding flag into which + * secondary core is held until we're ready for it to initialise. + * The primary core will update the this flag using a hardware + * register AuxCoreBoot1. + */ +ENTRY(omap_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #0x0f +hold: ldr r1, =OMAP4_AUX_CORE_BOOT1_PA @ read from AuxCoreBoot1 + ldr r2, [r1] + cmp r2, r0 + bne hold + + /* + * we've been released from the cpu_release,secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c new file mode 100644 index 0000000..8fe8d23 --- /dev/null +++ b/arch/arm/mach-omap2/omap-smp.c @@ -0,0 +1,178 @@ +/* + * OMAP4 SMP source file. It contains platform specific fucntions + * needed for the linux smp kernel. + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Author: + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Platform file needed for the OMAP4 SMP. This file is based on arm + * realview smp platform. + * * Copyright (c) 2002 ARM Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/smp.h> +#include <linux/io.h> + +#include <asm/localtimer.h> +#include <asm/smp_scu.h> +#include <mach/hardware.h> + +/* Registers used for communicating startup information */ +#define OMAP4_AUXCOREBOOT_REG0 (OMAP44XX_VA_WKUPGEN_BASE + 0x800) +#define OMAP4_AUXCOREBOOT_REG1 (OMAP44XX_VA_WKUPGEN_BASE + 0x804) + +/* SCU base address */ +static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE; + +/* + * Use SCU config register to count number of cores + */ +static inline unsigned int get_core_count(void) +{ + if (scu_base) + return scu_get_core_count(scu_base); + return 1; +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + trace_hardirqs_off(); + + /* + * If any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + + gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * Set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * Update the AuxCoreBoot1 with boot state for secondary core. + * omap_secondary_startup() routine will hold the secondary core till + * the AuxCoreBoot1 register is updated with cpu state + * A barrier is added to ensure that write buffer is drained + */ + __raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1); + smp_wmb(); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) + ; + + /* + * Now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return 0; +} + +static void __init wakeup_secondary(void) +{ + /* + * Write the address of secondary startup routine into the + * AuxCoreBoot0 where ROM code will jump and start executing + * on secondary core once out of WFE + * A barrier is added to ensure that write buffer is drained + */ + __raw_writel(virt_to_phys(omap_secondary_startup), \ + OMAP4_AUXCOREBOOT_REG0); + smp_wmb(); + + /* + * Send a 'sev' to wake the secondary core from WFE. + */ + set_event(); + mb(); +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +void __init smp_init_cpus(void) +{ + unsigned int i, ncores = get_core_count(); + + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = get_core_count(); + unsigned int cpu = smp_processor_id(); + int i; + + /* sanity check */ + if (ncores == 0) { + printk(KERN_ERR + "OMAP4: strange core count of 0? Default to 1\n"); + ncores = 1; + } + + if (ncores > NR_CPUS) { + printk(KERN_WARNING + "OMAP4: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, NR_CPUS); + ncores = NR_CPUS; + } + smp_store_cpu_info(cpu); + + /* + * are we trying to boot more cores than exist? + */ + if (max_cpus > ncores) + max_cpus = ncores; + + /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. + */ + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + + if (max_cpus > 1) { + /* + * Enable the local timer or broadcast device for the + * boot CPU, but only if we have more than one CPU. + */ + percpu_timer_setup(); + + /* + * Initialise the SCU and wake up the secondary core using + * wakeup_secondary(). + */ + scu_enable(scu_base); + wakeup_secondary(); + } +} diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c new file mode 100644 index 0000000..194189c --- /dev/null +++ b/arch/arm/mach-omap2/omap3-iommu.c @@ -0,0 +1,105 @@ +/* + * omap iommu: omap3 device registration + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> + +#include <mach/iommu.h> + +#define OMAP3_MMU1_BASE 0x480bd400 +#define OMAP3_MMU2_BASE 0x5d000000 +#define OMAP3_MMU1_IRQ 24 +#define OMAP3_MMU2_IRQ 28 + + +static unsigned long iommu_base[] __initdata = { + OMAP3_MMU1_BASE, + OMAP3_MMU2_BASE, +}; + +static int iommu_irq[] __initdata = { + OMAP3_MMU1_IRQ, + OMAP3_MMU2_IRQ, +}; + +static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = { + { + .name = "isp", + .nr_tlb_entries = 8, + .clk_name = "cam_ick", + }, +#if defined(CONFIG_MPU_BRIDGE_IOMMU) + { + .name = "iva2", + .nr_tlb_entries = 32, + .clk_name = "iva2_ck", + }, +#endif +}; +#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata) + +static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES]; + +static int __init omap3_iommu_init(void) +{ + int i, err; + + for (i = 0; i < NR_IOMMU_DEVICES; i++) { + struct platform_device *pdev; + struct resource res[2]; + + pdev = platform_device_alloc("omap-iommu", i); + if (!pdev) { + err = -ENOMEM; + goto err_out; + } + + memset(res, 0, sizeof(res)); + res[0].start = iommu_base[i]; + res[0].end = iommu_base[i] + MMU_REG_SIZE - 1; + res[0].flags = IORESOURCE_MEM; + res[1].start = res[1].end = iommu_irq[i]; + res[1].flags = IORESOURCE_IRQ; + + err = platform_device_add_resources(pdev, res, + ARRAY_SIZE(res)); + if (err) + goto err_out; + err = platform_device_add_data(pdev, &omap3_iommu_pdata[i], + sizeof(omap3_iommu_pdata[0])); + if (err) + goto err_out; + err = platform_device_add(pdev); + if (err) + goto err_out; + omap3_iommu_pdev[i] = pdev; + } + return 0; + +err_out: + while (i--) + platform_device_put(omap3_iommu_pdev[i]); + return err; +} +module_init(omap3_iommu_init); + +static void __exit omap3_iommu_exit(void) +{ + int i; + + for (i = 0; i < NR_IOMMU_DEVICES; i++) + platform_device_unregister(omap3_iommu_pdev[i]); +} +module_exit(omap3_iommu_exit); + +MODULE_AUTHOR("Hiroshi DOYU"); +MODULE_DESCRIPTION("omap iommu: omap3 device registration"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c new file mode 100644 index 0000000..6cc375a --- /dev/null +++ b/arch/arm/mach-omap2/pm-debug.c @@ -0,0 +1,152 @@ +/* + * OMAP Power Management debug routines + * + * Copyright (C) 2005 Texas Instruments, Inc. + * Copyright (C) 2006-2008 Nokia Corporation + * + * Written by: + * Richard Woodruff <r-woodruff2@ti.com> + * Tony Lindgren + * Juha Yrjola + * Amit Kucheria <amit.kucheria@nokia.com> + * Igor Stoppa <igor.stoppa@nokia.com> + * Jouni Hogander + * + * Based on pm.c for omap2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <mach/clock.h> +#include <mach/board.h> + +#include "prm.h" +#include "cm.h" +#include "pm.h" + +int omap2_pm_debug; + +#define DUMP_PRM_MOD_REG(mod, reg) \ + regs[reg_count].name = #mod "." #reg; \ + regs[reg_count++].val = prm_read_mod_reg(mod, reg) +#define DUMP_CM_MOD_REG(mod, reg) \ + regs[reg_count].name = #mod "." #reg; \ + regs[reg_count++].val = cm_read_mod_reg(mod, reg) +#define DUMP_PRM_REG(reg) \ + regs[reg_count].name = #reg; \ + regs[reg_count++].val = __raw_readl(reg) +#define DUMP_CM_REG(reg) \ + regs[reg_count].name = #reg; \ + regs[reg_count++].val = __raw_readl(reg) +#define DUMP_INTC_REG(reg, off) \ + regs[reg_count].name = #reg; \ + regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off))) + +void omap2_pm_dump(int mode, int resume, unsigned int us) +{ + struct reg { + const char *name; + u32 val; + } regs[32]; + int reg_count = 0, i; + const char *s1 = NULL, *s2 = NULL; + + if (!resume) { +#if 0 + /* MPU */ + DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET); + DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL); + DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL); + DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST); + DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP); +#endif +#if 0 + /* INTC */ + DUMP_INTC_REG(INTC_MIR0, 0x0084); + DUMP_INTC_REG(INTC_MIR1, 0x00a4); + DUMP_INTC_REG(INTC_MIR2, 0x00c4); +#endif +#if 0 + DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1); + if (cpu_is_omap24xx()) { + DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2); + DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD, + OMAP2_PRCM_CLKEMUL_CTRL_OFFSET); + DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD, + OMAP2_PRCM_CLKSRC_CTRL_OFFSET); + } + DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN); + DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1); + DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2); + DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN); + DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN); + DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE); + DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST); +#endif +#if 0 + /* DSP */ + if (cpu_is_omap24xx()) { + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST); + } +#endif + } else { + DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1); + if (cpu_is_omap24xx()) + DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2); + DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST); + DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); +#if 1 + DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098); + DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8); + DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8); +#endif + } + + switch (mode) { + case 0: + s1 = "full"; + s2 = "retention"; + break; + case 1: + s1 = "MPU"; + s2 = "retention"; + break; + case 2: + s1 = "MPU"; + s2 = "idle"; + break; + } + + if (!resume) +#ifdef CONFIG_NO_HZ + printk(KERN_INFO + "--- Going to %s %s (next timer after %u ms)\n", s1, s2, + jiffies_to_msecs(get_next_timer_interrupt(jiffies) - + jiffies)); +#else + printk(KERN_INFO "--- Going to %s %s\n", s1, s2); +#endif + else + printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n", + us / 1000, us % 1000); + + for (i = 0; i < reg_count; i++) + printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val); +} diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c deleted file mode 100644 index ea8ceae..0000000 --- a/arch/arm/mach-omap2/pm.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/pm.c - * - * OMAP2 Power Management Routines - * - * Copyright (C) 2006 Nokia Corporation - * Tony Lindgren <tony@atomide.com> - * - * Copyright (C) 2005 Texas Instruments, Inc. - * Richard Woodruff <r-woodruff2@ti.com> - * - * Based on pm.c for omap1 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/suspend.h> -#include <linux/sched.h> -#include <linux/proc_fs.h> -#include <linux/interrupt.h> -#include <linux/sysfs.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/atomic.h> -#include <asm/mach/time.h> -#include <asm/mach/irq.h> - -#include <mach/irqs.h> -#include <mach/clock.h> -#include <mach/sram.h> -#include <mach/pm.h> - -static struct clk *vclk; -static void (*omap2_sram_idle)(void); -static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev); -static void (*saved_idle)(void); - -extern void __init pmdomain_init(void); -extern void pmdomain_set_autoidle(void); - -static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE]; - -void omap2_pm_idle(void) -{ - local_irq_disable(); - local_fiq_disable(); - if (need_resched()) { - local_fiq_enable(); - local_irq_enable(); - return; - } - - omap2_sram_idle(); - local_fiq_enable(); - local_irq_enable(); -} - -static int omap2_pm_prepare(void) -{ - /* We cannot sleep in idle until we have resumed */ - saved_idle = pm_idle; - pm_idle = NULL; - return 0; -} - -static int omap2_pm_suspend(void) -{ - return 0; -} - -static int omap2_pm_enter(suspend_state_t state) -{ - int ret = 0; - - switch (state) - { - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - ret = omap2_pm_suspend(); - break; - default: - ret = -EINVAL; - } - - return ret; -} - -static void omap2_pm_finish(void) -{ - pm_idle = saved_idle; -} - -static struct platform_suspend_ops omap_pm_ops = { - .prepare = omap2_pm_prepare, - .enter = omap2_pm_enter, - .finish = omap2_pm_finish, - .valid = suspend_valid_only_mem, -}; - -static int __init omap2_pm_init(void) -{ - return 0; -} - -__initcall(omap2_pm_init); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h new file mode 100644 index 0000000..f7b3baf --- /dev/null +++ b/arch/arm/mach-omap2/pm.h @@ -0,0 +1,38 @@ +/* + * OMAP2/3 Power Management Routines + * + * Copyright (C) 2008 Nokia Corporation + * Jouni Hogander + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ARCH_ARM_MACH_OMAP2_PM_H +#define __ARCH_ARM_MACH_OMAP2_PM_H + +extern int omap2_pm_init(void); +extern int omap3_pm_init(void); + +#ifdef CONFIG_PM_DEBUG +extern void omap2_pm_dump(int mode, int resume, unsigned int us); +extern int omap2_pm_debug; +#else +#define omap2_pm_dump(mode, resume, us) do {} while (0); +#define omap2_pm_debug 0 +#endif /* CONFIG_PM_DEBUG */ + +extern void omap24xx_idle_loop_suspend(void); + +extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, + void __iomem *sdrc_power); +extern void omap34xx_cpu_suspend(u32 *addr, int save_state); +extern void save_secure_ram_context(u32 *addr); + +extern unsigned int omap24xx_idle_loop_suspend_sz; +extern unsigned int omap34xx_suspend_sz; +extern unsigned int save_secure_ram_context_sz; +extern unsigned int omap24xx_cpu_suspend_sz; +extern unsigned int omap34xx_cpu_suspend_sz; + +#endif diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c new file mode 100644 index 0000000..db10255 --- /dev/null +++ b/arch/arm/mach-omap2/pm24xx.c @@ -0,0 +1,549 @@ +/* + * OMAP2 Power Management Routines + * + * Copyright (C) 2005 Texas Instruments, Inc. + * Copyright (C) 2006-2008 Nokia Corporation + * + * Written by: + * Richard Woodruff <r-woodruff2@ti.com> + * Tony Lindgren + * Juha Yrjola + * Amit Kucheria <amit.kucheria@nokia.com> + * Igor Stoppa <igor.stoppa@nokia.com> + * + * Based on pm.c for omap1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/suspend.h> +#include <linux/sched.h> +#include <linux/proc_fs.h> +#include <linux/interrupt.h> +#include <linux/sysfs.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/time.h> +#include <linux/gpio.h> + +#include <asm/mach/time.h> +#include <asm/mach/irq.h> +#include <asm/mach-types.h> + +#include <mach/irqs.h> +#include <mach/clock.h> +#include <mach/sram.h> +#include <mach/control.h> +#include <mach/mux.h> +#include <mach/dma.h> +#include <mach/board.h> + +#include "prm.h" +#include "prm-regbits-24xx.h" +#include "cm.h" +#include "cm-regbits-24xx.h" +#include "sdrc.h" +#include "pm.h" + +#include <mach/powerdomain.h> +#include <mach/clockdomain.h> + +static void (*omap2_sram_idle)(void); +static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl, + void __iomem *sdrc_power); + +static struct powerdomain *mpu_pwrdm; +static struct powerdomain *core_pwrdm; + +static struct clockdomain *dsp_clkdm; +static struct clockdomain *gfx_clkdm; + +static struct clk *osc_ck, *emul_ck; + +static int omap2_fclks_active(void) +{ + u32 f1, f2; + + f1 = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); + + /* Ignore UART clocks. These are handled by UART core (serial.c) */ + f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2); + f2 &= ~OMAP24XX_EN_UART3; + + if (f1 | f2) + return 1; + return 0; +} + +static void omap2_enter_full_retention(void) +{ + u32 l; + struct timespec ts_preidle, ts_postidle, ts_idle; + + /* There is 1 reference hold for all children of the oscillator + * clock, the following will remove it. If no one else uses the + * oscillator itself it will be disabled if/when we enter retention + * mode. + */ + clk_disable(osc_ck); + + /* Clear old wake-up events */ + /* REVISIT: These write to reserved bits? */ + prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1); + prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); + prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST); + + /* + * Set MPU powerdomain's next power state to RETENTION; + * preserve logic state during retention + */ + pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET); + pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET); + + /* Workaround to kill USB */ + l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL; + omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0); + + omap2_gpio_prepare_for_retention(); + + if (omap2_pm_debug) { + omap2_pm_dump(0, 0, 0); + getnstimeofday(&ts_preidle); + } + + /* One last check for pending IRQs to avoid extra latency due + * to sleeping unnecessarily. */ + if (omap_irq_pending()) + goto no_sleep; + + omap_uart_prepare_idle(0); + omap_uart_prepare_idle(1); + omap_uart_prepare_idle(2); + + /* Jump to SRAM suspend code */ + omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL), + OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL), + OMAP_SDRC_REGADDR(SDRC_POWER)); + + omap_uart_resume_idle(2); + omap_uart_resume_idle(1); + omap_uart_resume_idle(0); + +no_sleep: + if (omap2_pm_debug) { + unsigned long long tmp; + + getnstimeofday(&ts_postidle); + ts_idle = timespec_sub(ts_postidle, ts_preidle); + tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; + omap2_pm_dump(0, 1, tmp); + } + omap2_gpio_resume_after_retention(); + + clk_enable(osc_ck); + + /* clear CORE wake-up events */ + prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1); + prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); + + /* wakeup domain events - bit 1: GPT1, bit5 GPIO */ + prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST); + + /* MPU domain wake events */ + l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + if (l & 0x01) + prm_write_mod_reg(0x01, OCP_MOD, + OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + if (l & 0x20) + prm_write_mod_reg(0x20, OCP_MOD, + OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + + /* Mask future PRCM-to-MPU interrupts */ + prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); +} + +static int omap2_i2c_active(void) +{ + u32 l; + + l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1); +} + +static int sti_console_enabled; + +static int omap2_allow_mpu_retention(void) +{ + u32 l; + + /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */ + l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 | + OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 | + OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1)) + return 0; + /* Check for UART3. */ + l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); + if (l & OMAP24XX_EN_UART3) + return 0; + if (sti_console_enabled) + return 0; + + return 1; +} + +static void omap2_enter_mpu_retention(void) +{ + int only_idle = 0; + struct timespec ts_preidle, ts_postidle, ts_idle; + + /* Putting MPU into the WFI state while a transfer is active + * seems to cause the I2C block to timeout. Why? Good question. */ + if (omap2_i2c_active()) + return; + + /* The peripherals seem not to be able to wake up the MPU when + * it is in retention mode. */ + if (omap2_allow_mpu_retention()) { + /* REVISIT: These write to reserved bits? */ + prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1); + prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); + prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST); + + /* Try to enter MPU retention */ + prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) | + OMAP_LOGICRETSTATE, + MPU_MOD, PM_PWSTCTRL); + } else { + /* Block MPU retention */ + + prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL); + only_idle = 1; + } + + if (omap2_pm_debug) { + omap2_pm_dump(only_idle ? 2 : 1, 0, 0); + getnstimeofday(&ts_preidle); + } + + omap2_sram_idle(); + + if (omap2_pm_debug) { + unsigned long long tmp; + + getnstimeofday(&ts_postidle); + ts_idle = timespec_sub(ts_postidle, ts_preidle); + tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; + omap2_pm_dump(only_idle ? 2 : 1, 1, tmp); + } +} + +static int omap2_can_sleep(void) +{ + if (omap2_fclks_active()) + return 0; + if (osc_ck->usecount > 1) + return 0; + if (omap_dma_running()) + return 0; + + return 1; +} + +static void omap2_pm_idle(void) +{ + local_irq_disable(); + local_fiq_disable(); + + if (!omap2_can_sleep()) { + if (omap_irq_pending()) + goto out; + omap2_enter_mpu_retention(); + goto out; + } + + if (omap_irq_pending()) + goto out; + + omap2_enter_full_retention(); + +out: + local_fiq_enable(); + local_irq_enable(); +} + +static int omap2_pm_prepare(void) +{ + /* We cannot sleep in idle until we have resumed */ + disable_hlt(); + return 0; +} + +static int omap2_pm_suspend(void) +{ + u32 wken_wkup, mir1; + + wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN); + prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN); + + /* Mask GPT1 */ + mir1 = omap_readl(0x480fe0a4); + omap_writel(1 << 5, 0x480fe0ac); + + omap_uart_prepare_suspend(); + omap2_enter_full_retention(); + + omap_writel(mir1, 0x480fe0a4); + prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN); + + return 0; +} + +static int omap2_pm_enter(suspend_state_t state) +{ + int ret = 0; + + switch (state) { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + ret = omap2_pm_suspend(); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static void omap2_pm_finish(void) +{ + enable_hlt(); +} + +static struct platform_suspend_ops omap_pm_ops = { + .prepare = omap2_pm_prepare, + .enter = omap2_pm_enter, + .finish = omap2_pm_finish, + .valid = suspend_valid_only_mem, +}; + +static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm) +{ + omap2_clkdm_allow_idle(clkdm); + return 0; +} + +static void __init prcm_setup_regs(void) +{ + int i, num_mem_banks; + struct powerdomain *pwrdm; + + /* Enable autoidle */ + prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD, + OMAP2_PRCM_SYSCONFIG_OFFSET); + + /* Set all domain wakeup dependencies */ + prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP); + prm_write_mod_reg(0, GFX_MOD, PM_WKDEP); + prm_write_mod_reg(0, CORE_MOD, PM_WKDEP); + if (cpu_is_omap2430()) + prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP); + + /* + * Set CORE powerdomain memory banks to retain their contents + * during RETENTION + */ + num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm); + for (i = 0; i < num_mem_banks; i++) + pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET); + + /* Set CORE powerdomain's next power state to RETENTION */ + pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET); + + /* + * Set MPU powerdomain's next power state to RETENTION; + * preserve logic state during retention + */ + pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET); + pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET); + + /* Force-power down DSP, GFX powerdomains */ + + pwrdm = clkdm_get_pwrdm(dsp_clkdm); + pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF); + omap2_clkdm_sleep(dsp_clkdm); + + pwrdm = clkdm_get_pwrdm(gfx_clkdm); + pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF); + omap2_clkdm_sleep(gfx_clkdm); + + /* Enable clockdomain hardware-supervised control for all clkdms */ + clkdm_for_each(_pm_clkdm_enable_hwsup); + + /* Enable clock autoidle for all domains */ + cm_write_mod_reg(OMAP24XX_AUTO_CAM | + OMAP24XX_AUTO_MAILBOXES | + OMAP24XX_AUTO_WDT4 | + OMAP2420_AUTO_WDT3 | + OMAP24XX_AUTO_MSPRO | + OMAP2420_AUTO_MMC | + OMAP24XX_AUTO_FAC | + OMAP2420_AUTO_EAC | + OMAP24XX_AUTO_HDQ | + OMAP24XX_AUTO_UART2 | + OMAP24XX_AUTO_UART1 | + OMAP24XX_AUTO_I2C2 | + OMAP24XX_AUTO_I2C1 | + OMAP24XX_AUTO_MCSPI2 | + OMAP24XX_AUTO_MCSPI1 | + OMAP24XX_AUTO_MCBSP2 | + OMAP24XX_AUTO_MCBSP1 | + OMAP24XX_AUTO_GPT12 | + OMAP24XX_AUTO_GPT11 | + OMAP24XX_AUTO_GPT10 | + OMAP24XX_AUTO_GPT9 | + OMAP24XX_AUTO_GPT8 | + OMAP24XX_AUTO_GPT7 | + OMAP24XX_AUTO_GPT6 | + OMAP24XX_AUTO_GPT5 | + OMAP24XX_AUTO_GPT4 | + OMAP24XX_AUTO_GPT3 | + OMAP24XX_AUTO_GPT2 | + OMAP2420_AUTO_VLYNQ | + OMAP24XX_AUTO_DSS, + CORE_MOD, CM_AUTOIDLE1); + cm_write_mod_reg(OMAP24XX_AUTO_UART3 | + OMAP24XX_AUTO_SSI | + OMAP24XX_AUTO_USB, + CORE_MOD, CM_AUTOIDLE2); + cm_write_mod_reg(OMAP24XX_AUTO_SDRC | + OMAP24XX_AUTO_GPMC | + OMAP24XX_AUTO_SDMA, + CORE_MOD, CM_AUTOIDLE3); + cm_write_mod_reg(OMAP24XX_AUTO_PKA | + OMAP24XX_AUTO_AES | + OMAP24XX_AUTO_RNG | + OMAP24XX_AUTO_SHA | + OMAP24XX_AUTO_DES, + CORE_MOD, OMAP24XX_CM_AUTOIDLE4); + + cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE); + + /* Put DPLL and both APLLs into autoidle mode */ + cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) | + (0x03 << OMAP24XX_AUTO_96M_SHIFT) | + (0x03 << OMAP24XX_AUTO_54M_SHIFT), + PLL_MOD, CM_AUTOIDLE); + + cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL | + OMAP24XX_AUTO_WDT1 | + OMAP24XX_AUTO_MPU_WDT | + OMAP24XX_AUTO_GPIOS | + OMAP24XX_AUTO_32KSYNC | + OMAP24XX_AUTO_GPT1, + WKUP_MOD, CM_AUTOIDLE); + + /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk + * stabilisation */ + prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD, + OMAP2_PRCM_CLKSSETUP_OFFSET); + + /* Configure automatic voltage transition */ + prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD, + OMAP2_PRCM_VOLTSETUP_OFFSET); + prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT | + (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) | + OMAP24XX_MEMRETCTRL | + (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) | + (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT), + OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET); + + /* Enable wake-up events */ + prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1, + WKUP_MOD, PM_WKEN); +} + +int __init omap2_pm_init(void) +{ + u32 l; + + if (!cpu_is_omap24xx()) + return -ENODEV; + + printk(KERN_INFO "Power Management for OMAP2 initializing\n"); + l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET); + printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f); + + /* Look up important powerdomains, clockdomains */ + + mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); + if (!mpu_pwrdm) + pr_err("PM: mpu_pwrdm not found\n"); + + core_pwrdm = pwrdm_lookup("core_pwrdm"); + if (!core_pwrdm) + pr_err("PM: core_pwrdm not found\n"); + + dsp_clkdm = clkdm_lookup("dsp_clkdm"); + if (!dsp_clkdm) + pr_err("PM: mpu_clkdm not found\n"); + + gfx_clkdm = clkdm_lookup("gfx_clkdm"); + if (!gfx_clkdm) + pr_err("PM: gfx_clkdm not found\n"); + + + osc_ck = clk_get(NULL, "osc_ck"); + if (IS_ERR(osc_ck)) { + printk(KERN_ERR "could not get osc_ck\n"); + return -ENODEV; + } + + if (cpu_is_omap242x()) { + emul_ck = clk_get(NULL, "emul_ck"); + if (IS_ERR(emul_ck)) { + printk(KERN_ERR "could not get emul_ck\n"); + clk_put(osc_ck); + return -ENODEV; + } + } + + prcm_setup_regs(); + + /* Hack to prevent MPU retention when STI console is enabled. */ + { + const struct omap_sti_console_config *sti; + + sti = omap_get_config(OMAP_TAG_STI_CONSOLE, + struct omap_sti_console_config); + if (sti != NULL && sti->enable) + sti_console_enabled = 1; + } + + /* + * We copy the assembler sleep/wakeup routines to SRAM. + * These routines need to be in SRAM as that's the only + * memory the MPU can see when it wakes up. + */ + if (cpu_is_omap24xx()) { + omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend, + omap24xx_idle_loop_suspend_sz); + + omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend, + omap24xx_cpu_suspend_sz); + } + + suspend_set_ops(&omap_pm_ops); + pm_idle = omap2_pm_idle; + + return 0; +} + +late_initcall(omap2_pm_init); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c new file mode 100644 index 0000000..841d4c5 --- /dev/null +++ b/arch/arm/mach-omap2/pm34xx.c @@ -0,0 +1,710 @@ +/* + * OMAP3 Power Management Routines + * + * Copyright (C) 2006-2008 Nokia Corporation + * Tony Lindgren <tony@atomide.com> + * Jouni Hogander + * + * Copyright (C) 2005 Texas Instruments, Inc. + * Richard Woodruff <r-woodruff2@ti.com> + * + * Based on pm.c for omap1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/pm.h> +#include <linux/suspend.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/err.h> +#include <linux/gpio.h> + +#include <mach/sram.h> +#include <mach/clockdomain.h> +#include <mach/powerdomain.h> +#include <mach/control.h> +#include <mach/serial.h> + +#include "cm.h" +#include "cm-regbits-34xx.h" +#include "prm-regbits-34xx.h" + +#include "prm.h" +#include "pm.h" + +struct power_state { + struct powerdomain *pwrdm; + u32 next_state; + u32 saved_state; + struct list_head node; +}; + +static LIST_HEAD(pwrst_list); + +static void (*_omap_sram_idle)(u32 *addr, int save_state); + +static struct powerdomain *mpu_pwrdm; + +/* PRCM Interrupt Handler for wakeups */ +static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) +{ + u32 wkst, irqstatus_mpu; + u32 fclk, iclk; + + /* WKUP */ + wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST); + if (wkst) { + iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN); + fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN); + cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN); + cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN); + prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST); + while (prm_read_mod_reg(WKUP_MOD, PM_WKST)) + cpu_relax(); + cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN); + cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN); + } + + /* CORE */ + wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1); + if (wkst) { + iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1); + fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1); + cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1); + prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1); + while (prm_read_mod_reg(CORE_MOD, PM_WKST1)) + cpu_relax(); + cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1); + cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1); + } + wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3); + if (wkst) { + iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3); + fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3); + cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3); + cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); + prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3); + while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3)) + cpu_relax(); + cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3); + cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); + } + + /* PER */ + wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST); + if (wkst) { + iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN); + fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN); + prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST); + while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST)) + cpu_relax(); + cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN); + cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN); + } + + if (omap_rev() > OMAP3430_REV_ES1_0) { + /* USBHOST */ + wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST); + if (wkst) { + iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + CM_ICLKEN); + fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, + CM_ICLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD, + PM_WKST); + while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + PM_WKST)) + cpu_relax(); + cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD, + CM_ICLKEN); + cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + } + } + + irqstatus_mpu = prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + prm_write_mod_reg(irqstatus_mpu, OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET)) + cpu_relax(); + + return IRQ_HANDLED; +} + +static void omap_sram_idle(void) +{ + /* Variable to tell what needs to be saved and restored + * in omap_sram_idle*/ + /* save_state = 0 => Nothing to save and restored */ + /* save_state = 1 => Only L1 and logic lost */ + /* save_state = 2 => Only L2 lost */ + /* save_state = 3 => L1, L2 and logic lost */ + int save_state = 0, mpu_next_state; + + if (!_omap_sram_idle) + return; + + mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); + switch (mpu_next_state) { + case PWRDM_POWER_RET: + /* No need to save context */ + save_state = 0; + break; + default: + /* Invalid state */ + printk(KERN_ERR "Invalid mpu state in sram_idle\n"); + return; + } + omap2_gpio_prepare_for_retention(); + omap_uart_prepare_idle(0); + omap_uart_prepare_idle(1); + omap_uart_prepare_idle(2); + + _omap_sram_idle(NULL, save_state); + cpu_init(); + + omap_uart_resume_idle(2); + omap_uart_resume_idle(1); + omap_uart_resume_idle(0); + omap2_gpio_resume_after_retention(); +} + +/* + * Check if functional clocks are enabled before entering + * sleep. This function could be behind CONFIG_PM_DEBUG + * when all drivers are configuring their sysconfig registers + * properly and using their clocks properly. + */ +static int omap3_fclks_active(void) +{ + u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0, + fck_cam = 0, fck_per = 0, fck_usbhost = 0; + + fck_core1 = cm_read_mod_reg(CORE_MOD, + CM_FCLKEN1); + if (omap_rev() > OMAP3430_REV_ES1_0) { + fck_core3 = cm_read_mod_reg(CORE_MOD, + OMAP3430ES2_CM_FCLKEN3); + fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD, + CM_FCLKEN); + fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + } else + fck_sgx = cm_read_mod_reg(GFX_MOD, + OMAP3430ES2_CM_FCLKEN3); + fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD, + CM_FCLKEN); + fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD, + CM_FCLKEN); + fck_per = cm_read_mod_reg(OMAP3430_PER_MOD, + CM_FCLKEN); + + /* Ignore UART clocks. These are handled by UART core (serial.c) */ + fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2); + fck_per &= ~OMAP3430_EN_UART3; + + if (fck_core1 | fck_core3 | fck_sgx | fck_dss | + fck_cam | fck_per | fck_usbhost) + return 1; + return 0; +} + +static int omap3_can_sleep(void) +{ + if (!omap_uart_can_sleep()) + return 0; + if (omap3_fclks_active()) + return 0; + return 1; +} + +/* This sets pwrdm state (other than mpu & core. Currently only ON & + * RET are supported. Function is assuming that clkdm doesn't have + * hw_sup mode enabled. */ +static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state) +{ + u32 cur_state; + int sleep_switch = 0; + int ret = 0; + + if (pwrdm == NULL || IS_ERR(pwrdm)) + return -EINVAL; + + while (!(pwrdm->pwrsts & (1 << state))) { + if (state == PWRDM_POWER_OFF) + return ret; + state--; + } + + cur_state = pwrdm_read_next_pwrst(pwrdm); + if (cur_state == state) + return ret; + + if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) { + omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); + sleep_switch = 1; + pwrdm_wait_transition(pwrdm); + } + + ret = pwrdm_set_next_pwrst(pwrdm, state); + if (ret) { + printk(KERN_ERR "Unable to set state of powerdomain: %s\n", + pwrdm->name); + goto err; + } + + if (sleep_switch) { + omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); + pwrdm_wait_transition(pwrdm); + } + +err: + return ret; +} + +static void omap3_pm_idle(void) +{ + local_irq_disable(); + local_fiq_disable(); + + if (!omap3_can_sleep()) + goto out; + + if (omap_irq_pending()) + goto out; + + omap_sram_idle(); + +out: + local_fiq_enable(); + local_irq_enable(); +} + +static int omap3_pm_prepare(void) +{ + disable_hlt(); + return 0; +} + +static int omap3_pm_suspend(void) +{ + struct power_state *pwrst; + int state, ret = 0; + + /* Read current next_pwrsts */ + list_for_each_entry(pwrst, &pwrst_list, node) + pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); + /* Set ones wanted by suspend */ + list_for_each_entry(pwrst, &pwrst_list, node) { + if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state)) + goto restore; + if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm)) + goto restore; + } + + omap_uart_prepare_suspend(); + omap_sram_idle(); + +restore: + /* Restore next_pwrsts */ + list_for_each_entry(pwrst, &pwrst_list, node) { + set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); + state = pwrdm_read_prev_pwrst(pwrst->pwrdm); + if (state > pwrst->next_state) { + printk(KERN_INFO "Powerdomain (%s) didn't enter " + "target state %d\n", + pwrst->pwrdm->name, pwrst->next_state); + ret = -1; + } + } + if (ret) + printk(KERN_ERR "Could not enter target state in pm_suspend\n"); + else + printk(KERN_INFO "Successfully put all powerdomains " + "to target state\n"); + + return ret; +} + +static int omap3_pm_enter(suspend_state_t state) +{ + int ret = 0; + + switch (state) { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + ret = omap3_pm_suspend(); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static void omap3_pm_finish(void) +{ + enable_hlt(); +} + +static struct platform_suspend_ops omap_pm_ops = { + .prepare = omap3_pm_prepare, + .enter = omap3_pm_enter, + .finish = omap3_pm_finish, + .valid = suspend_valid_only_mem, +}; + + +/** + * omap3_iva_idle(): ensure IVA is in idle so it can be put into + * retention + * + * In cases where IVA2 is activated by bootcode, it may prevent + * full-chip retention or off-mode because it is not idle. This + * function forces the IVA2 into idle state so it can go + * into retention/off and thus allow full-chip retention/off. + * + **/ +static void __init omap3_iva_idle(void) +{ + /* ensure IVA2 clock is disabled */ + cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); + + /* if no clock activity, nothing else to do */ + if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) & + OMAP3430_CLKACTIVITY_IVA2_MASK)) + return; + + /* Reset IVA2 */ + prm_write_mod_reg(OMAP3430_RST1_IVA2 | + OMAP3430_RST2_IVA2 | + OMAP3430_RST3_IVA2, + OMAP3430_IVA2_MOD, RM_RSTCTRL); + + /* Enable IVA2 clock */ + cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2, + OMAP3430_IVA2_MOD, CM_FCLKEN); + + /* Set IVA2 boot mode to 'idle' */ + omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE, + OMAP343X_CONTROL_IVA2_BOOTMOD); + + /* Un-reset IVA2 */ + prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL); + + /* Disable IVA2 clock */ + cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); + + /* Reset IVA2 */ + prm_write_mod_reg(OMAP3430_RST1_IVA2 | + OMAP3430_RST2_IVA2 | + OMAP3430_RST3_IVA2, + OMAP3430_IVA2_MOD, RM_RSTCTRL); +} + +static void __init omap3_d2d_idle(void) +{ + u16 mask, padconf; + + /* In a stand alone OMAP3430 where there is not a stacked + * modem for the D2D Idle Ack and D2D MStandby must be pulled + * high. S CONTROL_PADCONF_SAD2D_IDLEACK and + * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */ + mask = (1 << 4) | (1 << 3); /* pull-up, enabled */ + padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY); + padconf |= mask; + omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY); + + padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK); + padconf |= mask; + omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK); + + /* reset modem */ + prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON | + OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST, + CORE_MOD, RM_RSTCTRL); + prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL); +} + +static void __init prcm_setup_regs(void) +{ + /* XXX Reset all wkdeps. This should be done when initializing + * powerdomains */ + prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP); + prm_write_mod_reg(0, MPU_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP); + if (omap_rev() > OMAP3430_REV_ES1_0) { + prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP); + } else + prm_write_mod_reg(0, GFX_MOD, PM_WKDEP); + + /* + * Enable interface clock autoidle for all modules. + * Note that in the long run this should be done by clockfw + */ + cm_write_mod_reg( + OMAP3430_AUTO_MODEM | + OMAP3430ES2_AUTO_MMC3 | + OMAP3430ES2_AUTO_ICR | + OMAP3430_AUTO_AES2 | + OMAP3430_AUTO_SHA12 | + OMAP3430_AUTO_DES2 | + OMAP3430_AUTO_MMC2 | + OMAP3430_AUTO_MMC1 | + OMAP3430_AUTO_MSPRO | + OMAP3430_AUTO_HDQ | + OMAP3430_AUTO_MCSPI4 | + OMAP3430_AUTO_MCSPI3 | + OMAP3430_AUTO_MCSPI2 | + OMAP3430_AUTO_MCSPI1 | + OMAP3430_AUTO_I2C3 | + OMAP3430_AUTO_I2C2 | + OMAP3430_AUTO_I2C1 | + OMAP3430_AUTO_UART2 | + OMAP3430_AUTO_UART1 | + OMAP3430_AUTO_GPT11 | + OMAP3430_AUTO_GPT10 | + OMAP3430_AUTO_MCBSP5 | + OMAP3430_AUTO_MCBSP1 | + OMAP3430ES1_AUTO_FAC | /* This is es1 only */ + OMAP3430_AUTO_MAILBOXES | + OMAP3430_AUTO_OMAPCTRL | + OMAP3430ES1_AUTO_FSHOSTUSB | + OMAP3430_AUTO_HSOTGUSB | + OMAP3430_AUTO_SAD2D | + OMAP3430_AUTO_SSI, + CORE_MOD, CM_AUTOIDLE1); + + cm_write_mod_reg( + OMAP3430_AUTO_PKA | + OMAP3430_AUTO_AES1 | + OMAP3430_AUTO_RNG | + OMAP3430_AUTO_SHA11 | + OMAP3430_AUTO_DES1, + CORE_MOD, CM_AUTOIDLE2); + + if (omap_rev() > OMAP3430_REV_ES1_0) { + cm_write_mod_reg( + OMAP3430_AUTO_MAD2D | + OMAP3430ES2_AUTO_USBTLL, + CORE_MOD, CM_AUTOIDLE3); + } + + cm_write_mod_reg( + OMAP3430_AUTO_WDT2 | + OMAP3430_AUTO_WDT1 | + OMAP3430_AUTO_GPIO1 | + OMAP3430_AUTO_32KSYNC | + OMAP3430_AUTO_GPT12 | + OMAP3430_AUTO_GPT1 , + WKUP_MOD, CM_AUTOIDLE); + + cm_write_mod_reg( + OMAP3430_AUTO_DSS, + OMAP3430_DSS_MOD, + CM_AUTOIDLE); + + cm_write_mod_reg( + OMAP3430_AUTO_CAM, + OMAP3430_CAM_MOD, + CM_AUTOIDLE); + + cm_write_mod_reg( + OMAP3430_AUTO_GPIO6 | + OMAP3430_AUTO_GPIO5 | + OMAP3430_AUTO_GPIO4 | + OMAP3430_AUTO_GPIO3 | + OMAP3430_AUTO_GPIO2 | + OMAP3430_AUTO_WDT3 | + OMAP3430_AUTO_UART3 | + OMAP3430_AUTO_GPT9 | + OMAP3430_AUTO_GPT8 | + OMAP3430_AUTO_GPT7 | + OMAP3430_AUTO_GPT6 | + OMAP3430_AUTO_GPT5 | + OMAP3430_AUTO_GPT4 | + OMAP3430_AUTO_GPT3 | + OMAP3430_AUTO_GPT2 | + OMAP3430_AUTO_MCBSP4 | + OMAP3430_AUTO_MCBSP3 | + OMAP3430_AUTO_MCBSP2, + OMAP3430_PER_MOD, + CM_AUTOIDLE); + + if (omap_rev() > OMAP3430_REV_ES1_0) { + cm_write_mod_reg( + OMAP3430ES2_AUTO_USBHOST, + OMAP3430ES2_USBHOST_MOD, + CM_AUTOIDLE); + } + + /* + * Set all plls to autoidle. This is needed until autoidle is + * enabled by clockfw + */ + cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT, + OMAP3430_IVA2_MOD, CM_AUTOIDLE2); + cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT, + MPU_MOD, + CM_AUTOIDLE2); + cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) | + (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT), + PLL_MOD, + CM_AUTOIDLE); + cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT, + PLL_MOD, + CM_AUTOIDLE2); + + /* + * Enable control of expternal oscillator through + * sys_clkreq. In the long run clock framework should + * take care of this. + */ + prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK, + 1 << OMAP_AUTOEXTCLKMODE_SHIFT, + OMAP3430_GR_MOD, + OMAP3_PRM_CLKSRC_CTRL_OFFSET); + + /* setup wakup source */ + prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 | + OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12, + WKUP_MOD, PM_WKEN); + /* No need to write EN_IO, that is always enabled */ + prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 | + OMAP3430_EN_GPT12, + WKUP_MOD, OMAP3430_PM_MPUGRPSEL); + /* For some reason IO doesn't generate wakeup event even if + * it is selected to mpu wakeup goup */ + prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN, + OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + + /* Don't attach IVA interrupts */ + prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + + /* Clear any pending 'reset' flags */ + prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST); + + /* Clear any pending PRCM interrupts */ + prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + omap3_iva_idle(); + omap3_d2d_idle(); +} + +static int __init pwrdms_setup(struct powerdomain *pwrdm) +{ + struct power_state *pwrst; + + if (!pwrdm->pwrsts) + return 0; + + pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL); + if (!pwrst) + return -ENOMEM; + pwrst->pwrdm = pwrdm; + pwrst->next_state = PWRDM_POWER_RET; + list_add(&pwrst->node, &pwrst_list); + + if (pwrdm_has_hdwr_sar(pwrdm)) + pwrdm_enable_hdwr_sar(pwrdm); + + return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); +} + +/* + * Enable hw supervised mode for all clockdomains if it's + * supported. Initiate sleep transition for other clockdomains, if + * they are not used + */ +static int __init clkdms_setup(struct clockdomain *clkdm) +{ + if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) + omap2_clkdm_allow_idle(clkdm); + else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && + atomic_read(&clkdm->usecount) == 0) + omap2_clkdm_sleep(clkdm); + return 0; +} + +int __init omap3_pm_init(void) +{ + struct power_state *pwrst, *tmp; + int ret; + + if (!cpu_is_omap34xx()) + return -ENODEV; + + printk(KERN_ERR "Power Management for TI OMAP3.\n"); + + /* XXX prcm_setup_regs needs to be before enabling hw + * supervised mode for powerdomains */ + prcm_setup_regs(); + + ret = request_irq(INT_34XX_PRCM_MPU_IRQ, + (irq_handler_t)prcm_interrupt_handler, + IRQF_DISABLED, "prcm", NULL); + if (ret) { + printk(KERN_ERR "request_irq failed to register for 0x%x\n", + INT_34XX_PRCM_MPU_IRQ); + goto err1; + } + + ret = pwrdm_for_each(pwrdms_setup); + if (ret) { + printk(KERN_ERR "Failed to setup powerdomains\n"); + goto err2; + } + + (void) clkdm_for_each(clkdms_setup); + + mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); + if (mpu_pwrdm == NULL) { + printk(KERN_ERR "Failed to get mpu_pwrdm\n"); + goto err2; + } + + _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, + omap34xx_cpu_suspend_sz); + + suspend_set_ops(&omap_pm_ops); + + pm_idle = omap3_pm_idle; + +err1: + return ret; +err2: + free_irq(INT_34XX_PRCM_MPU_IRQ, NULL); + list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) { + list_del(&pwrst->node); + kfree(pwrst); + } + return ret; +} + +late_initcall(omap3_pm_init); diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 812d50e..cb1ae84 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -276,6 +276,8 @@ /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ #define OMAP3430_EN_GPIO1 (1 << 3) #define OMAP3430_EN_GPIO1_SHIFT 3 +#define OMAP3430_EN_GPT12 (1 << 1) +#define OMAP3430_EN_GPT12_SHIFT 1 #define OMAP3430_EN_GPT1 (1 << 0) #define OMAP3430_EN_GPT1_SHIFT 0 diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index c6a7940..9fd03a2 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -409,7 +409,7 @@ /* PM_PREPWSTST_CAM specific bits */ /* PM_PWSTCTRL_USBHOST specific bits */ -#define OMAP3430ES2_SAVEANDRESTORE_SHIFT (1 << 4) +#define OMAP3430ES2_SAVEANDRESTORE_SHIFT 4 /* RM_RSTST_PER specific bits */ diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 826d326b8..9937e28 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -16,17 +16,12 @@ #include "prcm-common.h" -#ifndef __ASSEMBLER__ -#define OMAP_PRM_REGADDR(module, reg) \ - IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg)) -#else #define OMAP2420_PRM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) #define OMAP2430_PRM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) #define OMAP34XX_PRM_REGADDR(module, reg) \ IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) -#endif /* * Architecture-specific global PRM registers @@ -38,80 +33,132 @@ * */ -/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */ -#define OMAP24XX_PRCM_VOLTCTRL_OFFSET 0x0050 -#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET 0x0080 - -/* 242x GR_MOD registers, use these only for assembly code */ -#define OMAP242X_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \ - OMAP24XX_PRCM_VOLTCTRL_OFFSET) -#define OMAP242X_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \ - OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET) - -/* 243x GR_MOD registers, use these only for assembly code */ -#define OMAP243X_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \ - OMAP24XX_PRCM_VOLTCTRL_OFFSET) -#define OMAP243X_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \ - OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET) - -/* These will disappear */ -#define OMAP24XX_PRCM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0000) -#define OMAP24XX_PRCM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0010) - -#define OMAP24XX_PRCM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018) -#define OMAP24XX_PRCM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c) - -#define OMAP24XX_PRCM_VOLTST OMAP_PRM_REGADDR(OCP_MOD, 0x0054) -#define OMAP24XX_PRCM_CLKSRC_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0060) -#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0070) -#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0078) -#define OMAP24XX_PRCM_CLKCFG_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0080) -#define OMAP24XX_PRCM_CLKCFG_STATUS OMAP_PRM_REGADDR(OCP_MOD, 0x0084) -#define OMAP24XX_PRCM_VOLTSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0090) -#define OMAP24XX_PRCM_CLKSSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0094) -#define OMAP24XX_PRCM_POLCTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0098) - -#define OMAP3430_PRM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0004) -#define OMAP3430_PRM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0014) - -#define OMAP3430_PRM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018) -#define OMAP3430_PRM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c) - - -#define OMAP3430_PRM_VC_SMPS_SA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020) -#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024) -#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028) -#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c) -#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030) -#define OMAP3430_PRM_VC_CH_CONF OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034) -#define OMAP3430_PRM_VC_I2C_CFG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038) -#define OMAP3430_PRM_VC_BYPASS_VAL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c) -#define OMAP3430_PRM_RSTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050) -#define OMAP3430_PRM_RSTTIME OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054) -#define OMAP3430_PRM_RSTST OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058) -#define OMAP3430_PRM_VOLTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060) -#define OMAP3430_PRM_SRAM_PCHARGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064) -#define OMAP3430_PRM_CLKSRC_CTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070) -#define OMAP3430_PRM_VOLTSETUP1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090) -#define OMAP3430_PRM_VOLTOFFSET OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094) -#define OMAP3430_PRM_CLKSETUP OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098) -#define OMAP3430_PRM_POLCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c) -#define OMAP3430_PRM_VOLTSETUP2 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0) -#define OMAP3430_PRM_VP1_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0) -#define OMAP3430_PRM_VP1_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4) -#define OMAP3430_PRM_VP1_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8) -#define OMAP3430_PRM_VP1_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc) -#define OMAP3430_PRM_VP1_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0) -#define OMAP3430_PRM_VP1_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4) -#define OMAP3430_PRM_VP2_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0) -#define OMAP3430_PRM_VP2_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4) -#define OMAP3430_PRM_VP2_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8) -#define OMAP3430_PRM_VP2_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc) -#define OMAP3430_PRM_VP2_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0) -#define OMAP3430_PRM_VP2_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4) - -#define OMAP3430_PRM_CLKSEL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040) -#define OMAP3430_PRM_CLKOUT_CTRL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070) +#define OMAP2_PRCM_REVISION_OFFSET 0x0000 +#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000) +#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010 +#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010) + +#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018 +#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c +#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c) + +#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050 +#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050) +#define OMAP2_PRCM_VOLTST_OFFSET 0x0054 +#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054) +#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060 +#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060) +#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070 +#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070) +#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078 +#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078) +#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080 +#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080) +#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084 +#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084) +#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090 +#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090) +#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094 +#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094) +#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098 +#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098) + +#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000) +#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010) + +#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c) + +#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050) +#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054) +#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060) +#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070) +#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078) +#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080) +#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084) +#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090) +#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094) +#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098) + +#define OMAP3_PRM_REVISION_OFFSET 0x0004 +#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004) +#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014 +#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014) + +#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018 +#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c +#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c) + + +#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020 +#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020) +#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024 +#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024) +#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028 +#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028) +#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c +#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c) +#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030 +#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030) +#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034 +#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034) +#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038 +#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038) +#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c +#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c) +#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050 +#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050) +#define OMAP3_PRM_RSTTIME_OFFSET 0x0054 +#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054) +#define OMAP3_PRM_RSTST_OFFSET 0x0058 +#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058) +#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060 +#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060) +#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064 +#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064) +#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070 +#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070) +#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090 +#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090) +#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094 +#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094) +#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098 +#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098) +#define OMAP3_PRM_POLCTRL_OFFSET 0x009c +#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c) +#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0 +#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0) +#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0 +#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0) +#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4 +#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4) +#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8 +#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8) +#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc +#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc) +#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0 +#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0) +#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4 +#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4) +#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0 +#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0) +#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4 +#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4) +#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8 +#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8) +#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc +#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc) +#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0 +#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0) +#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4 +#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4) + +#define OMAP3_PRM_CLKSEL_OFFSET 0x0040 +#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040) +#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070 +#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070) /* * Module specific PRM registers from PRM_BASE + domain offset @@ -156,9 +203,11 @@ #define OMAP3430_PM_MPUGRPSEL 0x00a4 #define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL +#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8 #define OMAP3430_PM_IVAGRPSEL 0x00a8 #define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL +#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4 #define OMAP3430_PM_PREPWSTST 0x00e8 diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h new file mode 100644 index 0000000..02e1c2d --- /dev/null +++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h @@ -0,0 +1,55 @@ +/* + * SDRC register values for the Micron MT46H32M32LF-6 + * + * Copyright (C) 2008 Texas Instruments, Inc. + * Copyright (C) 2008-2009 Nokia Corporation + * + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF +#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF + +#include <mach/sdrc.h> + +/* Micron MT46H32M32LF-6 */ +/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */ +static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = { + [0] = { + .rate = 166000000, + .actim_ctrla = 0x9a9db4c6, + .actim_ctrlb = 0x00011217, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [1] = { + .rate = 165941176, + .actim_ctrla = 0x9a9db4c6, + .actim_ctrlb = 0x00011217, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [2] = { + .rate = 83000000, + .actim_ctrla = 0x51512283, + .actim_ctrlb = 0x0001120c, + .rfr_ctrl = 0x00025501, + .mr = 0x00000032, + }, + [3] = { + .rate = 82970588, + .actim_ctrla = 0x51512283, + .actim_ctrlb = 0x0001120c, + .rfr_ctrl = 0x00025501, + .mr = 0x00000032, + }, + [4] = { + .rate = 0 + }, +}; + +#endif diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h new file mode 100644 index 0000000..3751d29 --- /dev/null +++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h @@ -0,0 +1,54 @@ +/* + * SDRC register values for the Qimonda HYB18M512160AF-6 + * + * Copyright (C) 2008-2009 Texas Instruments, Inc. + * Copyright (C) 2008-2009 Nokia Corporation + * + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 +#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 + +#include <mach/sdrc.h> + +/* Qimonda HYB18M512160AF-6 */ +static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = { + [0] = { + .rate = 166000000, + .actim_ctrla = 0x629db4c6, + .actim_ctrlb = 0x00012214, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [1] = { + .rate = 165941176, + .actim_ctrla = 0x629db4c6, + .actim_ctrlb = 0x00012214, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [2] = { + .rate = 83000000, + .actim_ctrla = 0x31512283, + .actim_ctrlb = 0x0001220a, + .rfr_ctrl = 0x00025501, + .mr = 0x00000022, + }, + [3] = { + .rate = 82970588, + .actim_ctrla = 0x31512283, + .actim_ctrlb = 0x0001220a, + .rfr_ctrl = 0x00025501, + .mr = 0x00000022, + }, + [4] = { + .rate = 0 + }, +}; + +#endif diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 2a30060..2045441 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -37,6 +37,10 @@ static struct omap_sdrc_params *sdrc_init_params; void __iomem *omap2_sdrc_base; void __iomem *omap2_sms_base; +/* SDRC_POWER register bits */ +#define SDRC_POWER_EXTCLKDIS_SHIFT 3 +#define SDRC_POWER_PWDENA_SHIFT 2 +#define SDRC_POWER_PAGEPOLICY_SHIFT 0 /** * omap2_sdrc_get_params - return SDRC register values for a given clock rate @@ -56,9 +60,12 @@ struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r) { struct omap_sdrc_params *sp; + if (!sdrc_init_params) + return NULL; + sp = sdrc_init_params; - while (sp->rate != r) + while (sp->rate && sp->rate != r) sp++; if (!sp->rate) @@ -74,7 +81,14 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) omap2_sms_base = omap2_globals->sms; } -/* turn on smart idle modes for SDRAM scheduler and controller */ +/** + * omap2_sdrc_init - initialize SMS, SDRC devices on boot + * @sp: pointer to a null-terminated list of struct omap_sdrc_params + * + * Turn on smart idle modes for SDRAM scheduler and controller. + * Program a known-good configuration for the SDRC to deal with buggy + * bootloaders. + */ void __init omap2_sdrc_init(struct omap_sdrc_params *sp) { u32 l; @@ -90,4 +104,10 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp) sdrc_write_reg(l, SDRC_SYSCONFIG); sdrc_init_params = sp; + + /* XXX Enable SRFRONIDLEREQ here also? */ + l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) | + (1 << SDRC_POWER_PWDENA_SHIFT) | + (1 << SDRC_POWER_PAGEPOLICY_SHIFT); + sdrc_write_reg(l, SDRC_POWER); } diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 0afdad5..feaec7e 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -99,7 +99,10 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force) m_type = omap2xxx_sdrc_get_type(); local_irq_save(flags); - __raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP); + if (cpu_is_omap2420()) + __raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP); + else + __raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP); omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type); curr_perf_level = level; local_irq_restore(flags); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 4dcf39c2..b094c15 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -6,8 +6,13 @@ * Copyright (C) 2005-2008 Nokia Corporation * Author: Paul Mundt <paul.mundt@nokia.com> * + * Major rework for PM support by Kevin Hilman + * * Based off of arch/arm/mach-omap/omap1/serial.c * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com + * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. @@ -21,9 +26,50 @@ #include <mach/common.h> #include <mach/board.h> +#include <mach/clock.h> +#include <mach/control.h> + +#include "prm.h" +#include "pm.h" +#include "prm-regbits-34xx.h" + +#define UART_OMAP_WER 0x17 /* Wake-up enable register */ + +#define DEFAULT_TIMEOUT (5 * HZ) -static struct clk *uart_ick[OMAP_MAX_NR_PORTS]; -static struct clk *uart_fck[OMAP_MAX_NR_PORTS]; +struct omap_uart_state { + int num; + int can_sleep; + struct timer_list timer; + u32 timeout; + + void __iomem *wk_st; + void __iomem *wk_en; + u32 wk_mask; + u32 padconf; + + struct clk *ick; + struct clk *fck; + int clocked; + + struct plat_serial8250_port *p; + struct list_head node; + +#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) + int context_valid; + + /* Registers to be saved/restored for OFF-mode */ + u16 dll; + u16 dlh; + u16 ier; + u16 sysc; + u16 scr; + u16 wer; +#endif +}; + +static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS]; +static LIST_HEAD(uart_list); static struct plat_serial8250_port serial_platform_data[] = { { @@ -74,33 +120,369 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, * properly. Note that the TX watermark initialization may not be needed * once the 8250.c watermark handling code is merged. */ -static inline void __init omap_serial_reset(struct plat_serial8250_port *p) +static inline void __init omap_uart_reset(struct omap_uart_state *uart) { + struct plat_serial8250_port *p = uart->p; + serial_write_reg(p, UART_OMAP_MDR1, 0x07); serial_write_reg(p, UART_OMAP_SCR, 0x08); serial_write_reg(p, UART_OMAP_MDR1, 0x00); serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0)); } -void omap_serial_enable_clocks(int enable) +#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) + +static int enable_off_mode; /* to be removed by full off-mode patches */ + +static void omap_uart_save_context(struct omap_uart_state *uart) { - int i; - for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - if (uart_ick[i] && uart_fck[i]) { - if (enable) { - clk_enable(uart_ick[i]); - clk_enable(uart_fck[i]); - } else { - clk_disable(uart_ick[i]); - clk_disable(uart_fck[i]); + u16 lcr = 0; + struct plat_serial8250_port *p = uart->p; + + if (!enable_off_mode) + return; + + lcr = serial_read_reg(p, UART_LCR); + serial_write_reg(p, UART_LCR, 0xBF); + uart->dll = serial_read_reg(p, UART_DLL); + uart->dlh = serial_read_reg(p, UART_DLM); + serial_write_reg(p, UART_LCR, lcr); + uart->ier = serial_read_reg(p, UART_IER); + uart->sysc = serial_read_reg(p, UART_OMAP_SYSC); + uart->scr = serial_read_reg(p, UART_OMAP_SCR); + uart->wer = serial_read_reg(p, UART_OMAP_WER); + + uart->context_valid = 1; +} + +static void omap_uart_restore_context(struct omap_uart_state *uart) +{ + u16 efr = 0; + struct plat_serial8250_port *p = uart->p; + + if (!enable_off_mode) + return; + + if (!uart->context_valid) + return; + + uart->context_valid = 0; + + serial_write_reg(p, UART_OMAP_MDR1, 0x7); + serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ + efr = serial_read_reg(p, UART_EFR); + serial_write_reg(p, UART_EFR, UART_EFR_ECB); + serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */ + serial_write_reg(p, UART_IER, 0x0); + serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(p, UART_DLL, uart->dll); + serial_write_reg(p, UART_DLM, uart->dlh); + serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */ + serial_write_reg(p, UART_IER, uart->ier); + serial_write_reg(p, UART_FCR, 0xA1); + serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(p, UART_EFR, efr); + serial_write_reg(p, UART_LCR, UART_LCR_WLEN8); + serial_write_reg(p, UART_OMAP_SCR, uart->scr); + serial_write_reg(p, UART_OMAP_WER, uart->wer); + serial_write_reg(p, UART_OMAP_SYSC, uart->sysc); + serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */ +} +#else +static inline void omap_uart_save_context(struct omap_uart_state *uart) {} +static inline void omap_uart_restore_context(struct omap_uart_state *uart) {} +#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */ + +static inline void omap_uart_enable_clocks(struct omap_uart_state *uart) +{ + if (uart->clocked) + return; + + clk_enable(uart->ick); + clk_enable(uart->fck); + uart->clocked = 1; + omap_uart_restore_context(uart); +} + +#ifdef CONFIG_PM + +static inline void omap_uart_disable_clocks(struct omap_uart_state *uart) +{ + if (!uart->clocked) + return; + + omap_uart_save_context(uart); + uart->clocked = 0; + clk_disable(uart->ick); + clk_disable(uart->fck); +} + +static void omap_uart_smart_idle_enable(struct omap_uart_state *uart, + int enable) +{ + struct plat_serial8250_port *p = uart->p; + u16 sysc; + + sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7; + if (enable) + sysc |= 0x2 << 3; + else + sysc |= 0x1 << 3; + + serial_write_reg(p, UART_OMAP_SYSC, sysc); +} + +static void omap_uart_block_sleep(struct omap_uart_state *uart) +{ + omap_uart_enable_clocks(uart); + + omap_uart_smart_idle_enable(uart, 0); + uart->can_sleep = 0; + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); + else + del_timer(&uart->timer); +} + +static void omap_uart_allow_sleep(struct omap_uart_state *uart) +{ + if (!uart->clocked) + return; + + omap_uart_smart_idle_enable(uart, 1); + uart->can_sleep = 1; + del_timer(&uart->timer); +} + +static void omap_uart_idle_timer(unsigned long data) +{ + struct omap_uart_state *uart = (struct omap_uart_state *)data; + + omap_uart_allow_sleep(uart); +} + +void omap_uart_prepare_idle(int num) +{ + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + if (num == uart->num && uart->can_sleep) { + omap_uart_disable_clocks(uart); + return; + } + } +} + +void omap_uart_resume_idle(int num) +{ + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + if (num == uart->num) { + omap_uart_enable_clocks(uart); + + /* Check for IO pad wakeup */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 p = omap_ctrl_readw(uart->padconf); + + if (p & OMAP3_PADCONF_WAKEUPEVENT0) + omap_uart_block_sleep(uart); } + + /* Check for normal UART wakeup */ + if (__raw_readl(uart->wk_st) & uart->wk_mask) + omap_uart_block_sleep(uart); + + return; } } } +void omap_uart_prepare_suspend(void) +{ + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + omap_uart_allow_sleep(uart); + } +} + +int omap_uart_can_sleep(void) +{ + struct omap_uart_state *uart; + int can_sleep = 1; + + list_for_each_entry(uart, &uart_list, node) { + if (!uart->clocked) + continue; + + if (!uart->can_sleep) { + can_sleep = 0; + continue; + } + + /* This UART can now safely sleep. */ + omap_uart_allow_sleep(uart); + } + + return can_sleep; +} + +/** + * omap_uart_interrupt() + * + * This handler is used only to detect that *any* UART interrupt has + * occurred. It does _nothing_ to handle the interrupt. Rather, + * any UART interrupt will trigger the inactivity timer so the + * UART will not idle or sleep for its timeout period. + * + **/ +static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) +{ + struct omap_uart_state *uart = dev_id; + + omap_uart_block_sleep(uart); + + return IRQ_NONE; +} + +static u32 sleep_timeout = DEFAULT_TIMEOUT; + +static void omap_uart_idle_init(struct omap_uart_state *uart) +{ + u32 v; + struct plat_serial8250_port *p = uart->p; + int ret; + + uart->can_sleep = 0; + uart->timeout = sleep_timeout; + setup_timer(&uart->timer, omap_uart_idle_timer, + (unsigned long) uart); + mod_timer(&uart->timer, jiffies + uart->timeout); + omap_uart_smart_idle_enable(uart, 0); + + if (cpu_is_omap34xx()) { + u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD; + u32 wk_mask = 0; + u32 padconf = 0; + + uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1); + uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1); + switch (uart->num) { + case 0: + wk_mask = OMAP3430_ST_UART1_MASK; + padconf = 0x182; + break; + case 1: + wk_mask = OMAP3430_ST_UART2_MASK; + padconf = 0x17a; + break; + case 2: + wk_mask = OMAP3430_ST_UART3_MASK; + padconf = 0x19e; + break; + } + uart->wk_mask = wk_mask; + uart->padconf = padconf; + } else if (cpu_is_omap24xx()) { + u32 wk_mask = 0; + + if (cpu_is_omap2430()) { + uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1); + uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1); + } else if (cpu_is_omap2420()) { + uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1); + uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1); + } + switch (uart->num) { + case 0: + wk_mask = OMAP24XX_ST_UART1_MASK; + break; + case 1: + wk_mask = OMAP24XX_ST_UART2_MASK; + break; + case 2: + wk_mask = OMAP24XX_ST_UART3_MASK; + break; + } + uart->wk_mask = wk_mask; + } else { + uart->wk_en = 0; + uart->wk_st = 0; + uart->wk_mask = 0; + uart->padconf = 0; + } + + /* Set wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + v = __raw_readl(uart->wk_en); + v |= uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are set */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v; + + v = omap_ctrl_readw(uart->padconf); + v |= OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } + + p->flags |= UPF_SHARE_IRQ; + ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, + "serial idle", (void *)uart); + WARN_ON(ret); +} + +static ssize_t sleep_timeout_show(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) +{ + return sprintf(buf, "%u\n", sleep_timeout / HZ); +} + +static ssize_t sleep_timeout_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t n) +{ + struct omap_uart_state *uart; + unsigned int value; + + if (sscanf(buf, "%u", &value) != 1) { + printk(KERN_ERR "sleep_timeout_store: Invalid value\n"); + return -EINVAL; + } + sleep_timeout = value * HZ; + list_for_each_entry(uart, &uart_list, node) { + uart->timeout = sleep_timeout; + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); + else + /* A zero value means disable timeout feature */ + omap_uart_block_sleep(uart); + } + return n; +} + +static struct kobj_attribute sleep_timeout_attr = + __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); + +#else +static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} +#endif /* CONFIG_PM */ + +static struct platform_device serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data, + }, +}; + void __init omap_serial_init(void) { - int i; + int i, err; const struct omap_uart_config *info; char name[16]; @@ -114,9 +496,14 @@ void __init omap_serial_init(void) if (info == NULL) return; + if (cpu_is_omap44xx()) { + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) + serial_platform_data[i].irq += 32; + } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { struct plat_serial8250_port *p = serial_platform_data + i; + struct omap_uart_state *uart = &omap_uart[i]; if (!(info->enabled_uarts & (1 << i))) { p->membase = NULL; @@ -125,35 +512,39 @@ void __init omap_serial_init(void) } sprintf(name, "uart%d_ick", i+1); - uart_ick[i] = clk_get(NULL, name); - if (IS_ERR(uart_ick[i])) { + uart->ick = clk_get(NULL, name); + if (IS_ERR(uart->ick)) { printk(KERN_ERR "Could not get uart%d_ick\n", i+1); - uart_ick[i] = NULL; - } else - clk_enable(uart_ick[i]); + uart->ick = NULL; + } sprintf(name, "uart%d_fck", i+1); - uart_fck[i] = clk_get(NULL, name); - if (IS_ERR(uart_fck[i])) { + uart->fck = clk_get(NULL, name); + if (IS_ERR(uart->fck)) { printk(KERN_ERR "Could not get uart%d_fck\n", i+1); - uart_fck[i] = NULL; - } else - clk_enable(uart_fck[i]); + uart->fck = NULL; + } - omap_serial_reset(p); + if (!uart->ick || !uart->fck) + continue; + + uart->num = i; + p->private_data = uart; + uart->p = p; + list_add(&uart->node, &uart_list); + + omap_uart_enable_clocks(uart); + omap_uart_reset(uart); + omap_uart_idle_init(uart); } -} -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; + err = platform_device_register(&serial_device); + +#ifdef CONFIG_PM + if (!err) + err = sysfs_create_file(&serial_device.dev.kobj, + &sleep_timeout_attr.attr); +#endif -static int __init omap_init(void) -{ - return platform_device_register(&serial_device); } -arch_initcall(omap_init); + diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index bf9e961..130aadb 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -28,7 +28,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <mach/io.h> -#include <mach/pm.h> #include <mach/omap24xx.h> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S new file mode 100644 index 0000000..e5e2553 --- /dev/null +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -0,0 +1,436 @@ +/* + * linux/arch/arm/mach-omap2/sleep.S + * + * (C) Copyright 2007 + * Texas Instruments + * Karthik Dasu <karthik-dp@ti.com> + * + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <mach/io.h> +#include <mach/control.h> + +#include "prm.h" +#include "sdrc.h" + +#define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \ + OMAP3430_PM_PREPWSTST) +#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \ + OMAP3430_PM_PREPWSTST) +#define PM_PWSTCTRL_MPU_P OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL) +#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is + * available */ +#define SCRATCHPAD_BASE_P OMAP343X_CTRL_REGADDR(\ + OMAP343X_CONTROL_MEM_WKUP +\ + SCRATCHPAD_MEM_OFFS) +#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER) + + .text +/* Function call to get the restore pointer for resume from OFF */ +ENTRY(get_restore_pointer) + stmfd sp!, {lr} @ save registers on stack + adr r0, restore + ldmfd sp!, {pc} @ restore regs and return +ENTRY(get_restore_pointer_sz) + .word . - get_restore_pointer_sz +/* + * Forces OMAP into idle state + * + * omap34xx_suspend() - This bit of code just executes the WFI + * for normal idles. + * + * Note: This code get's copied to internal SRAM at boot. When the OMAP + * wakes up it continues execution at the point it went to sleep. + */ +ENTRY(omap34xx_cpu_suspend) + stmfd sp!, {r0-r12, lr} @ save registers on stack +loop: + /*b loop*/ @Enable to debug by stepping through code + /* r0 contains restore pointer in sdram */ + /* r1 contains information about saving context */ + ldr r4, sdrc_power @ read the SDRC_POWER register + ldr r5, [r4] @ read the contents of SDRC_POWER + orr r5, r5, #0x40 @ enable self refresh on idle req + str r5, [r4] @ write back to SDRC_POWER register + + cmp r1, #0x0 + /* If context save is required, do that and execute wfi */ + bne save_context_wfi + /* Data memory barrier and Data sync barrier */ + mov r1, #0 + mcr p15, 0, r1, c7, c10, 4 + mcr p15, 0, r1, c7, c10, 5 + + wfi @ wait for interrupt + + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + bl i_dll_wait + + ldmfd sp!, {r0-r12, pc} @ restore regs and return +restore: + /* b restore*/ @ Enable to debug restore code + /* Check what was the reason for mpu reset and store the reason in r9*/ + /* 1 - Only L1 and logic lost */ + /* 2 - Only L2 lost - In this case, we wont be here */ + /* 3 - Both L1 and L2 lost */ + ldr r1, pm_pwstctrl_mpu + ldr r2, [r1] + and r2, r2, #0x3 + cmp r2, #0x0 @ Check if target power state was OFF or RET + moveq r9, #0x3 @ MPU OFF => L1 and L2 lost + movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation + bne logic_l1_restore + /* Execute smi to invalidate L2 cache */ + mov r12, #0x1 @ set up to invalide L2 +smi: .word 0xE1600070 @ Call SMI monitor (smieq) +logic_l1_restore: + mov r1, #0 + /* Invalidate all instruction caches to PoU + * and flush branch target cache */ + mcr p15, 0, r1, c7, c5, 0 + + ldr r4, scratchpad_base + ldr r3, [r4,#0xBC] + ldmia r3!, {r4-r6} + mov sp, r4 + msr spsr_cxsf, r5 + mov lr, r6 + + ldmia r3!, {r4-r9} + /* Coprocessor access Control Register */ + mcr p15, 0, r4, c1, c0, 2 + + /* TTBR0 */ + MCR p15, 0, r5, c2, c0, 0 + /* TTBR1 */ + MCR p15, 0, r6, c2, c0, 1 + /* Translation table base control register */ + MCR p15, 0, r7, c2, c0, 2 + /*domain access Control Register */ + MCR p15, 0, r8, c3, c0, 0 + /* data fault status Register */ + MCR p15, 0, r9, c5, c0, 0 + + ldmia r3!,{r4-r8} + /* instruction fault status Register */ + MCR p15, 0, r4, c5, c0, 1 + /*Data Auxiliary Fault Status Register */ + MCR p15, 0, r5, c5, c1, 0 + /*Instruction Auxiliary Fault Status Register*/ + MCR p15, 0, r6, c5, c1, 1 + /*Data Fault Address Register */ + MCR p15, 0, r7, c6, c0, 0 + /*Instruction Fault Address Register*/ + MCR p15, 0, r8, c6, c0, 2 + ldmia r3!,{r4-r7} + + /* user r/w thread and process ID */ + MCR p15, 0, r4, c13, c0, 2 + /* user ro thread and process ID */ + MCR p15, 0, r5, c13, c0, 3 + /*Privileged only thread and process ID */ + MCR p15, 0, r6, c13, c0, 4 + /* cache size selection */ + MCR p15, 2, r7, c0, c0, 0 + ldmia r3!,{r4-r8} + /* Data TLB lockdown registers */ + MCR p15, 0, r4, c10, c0, 0 + /* Instruction TLB lockdown registers */ + MCR p15, 0, r5, c10, c0, 1 + /* Secure or Nonsecure Vector Base Address */ + MCR p15, 0, r6, c12, c0, 0 + /* FCSE PID */ + MCR p15, 0, r7, c13, c0, 0 + /* Context PID */ + MCR p15, 0, r8, c13, c0, 1 + + ldmia r3!,{r4-r5} + /* primary memory remap register */ + MCR p15, 0, r4, c10, c2, 0 + /*normal memory remap register */ + MCR p15, 0, r5, c10, c2, 1 + + /* Restore cpsr */ + ldmia r3!,{r4} /*load CPSR from SDRAM*/ + msr cpsr, r4 /*store cpsr */ + + /* Enabling MMU here */ + mrc p15, 0, r7, c2, c0, 2 /* Read TTBRControl */ + /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/ + and r7, #0x7 + cmp r7, #0x0 + beq usettbr0 +ttbr_error: + /* More work needs to be done to support N[0:2] value other than 0 + * So looping here so that the error can be detected + */ + b ttbr_error +usettbr0: + mrc p15, 0, r2, c2, c0, 0 + ldr r5, ttbrbit_mask + and r2, r5 + mov r4, pc + ldr r5, table_index_mask + and r4, r5 /* r4 = 31 to 20 bits of pc */ + /* Extract the value to be written to table entry */ + ldr r1, table_entry + add r1, r1, r4 /* r1 has value to be written to table entry*/ + /* Getting the address of table entry to modify */ + lsr r4, #18 + add r2, r4 /* r2 has the location which needs to be modified */ + /* Storing previous entry of location being modified */ + ldr r5, scratchpad_base + ldr r4, [r2] + str r4, [r5, #0xC0] + /* Modify the table entry */ + str r1, [r2] + /* Storing address of entry being modified + * - will be restored after enabling MMU */ + ldr r5, scratchpad_base + str r2, [r5, #0xC4] + + mov r0, #0 + mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer + mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array + mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB + mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB + /* Restore control register but dont enable caches here*/ + /* Caches will be enabled after restoring MMU table entry */ + ldmia r3!, {r4} + /* Store previous value of control register in scratchpad */ + str r4, [r5, #0xC8] + ldr r2, cache_pred_disable_mask + and r4, r2 + mcr p15, 0, r4, c1, c0, 0 + + ldmfd sp!, {r0-r12, pc} @ restore regs and return +save_context_wfi: + /*b save_context_wfi*/ @ enable to debug save code + mov r8, r0 /* Store SDRAM address in r8 */ + /* Check what that target sleep state is:stored in r1*/ + /* 1 - Only L1 and logic lost */ + /* 2 - Only L2 lost */ + /* 3 - Both L1 and L2 lost */ + cmp r1, #0x2 /* Only L2 lost */ + beq clean_l2 + cmp r1, #0x1 /* L2 retained */ + /* r9 stores whether to clean L2 or not*/ + moveq r9, #0x0 /* Dont Clean L2 */ + movne r9, #0x1 /* Clean L2 */ +l1_logic_lost: + /* Store sp and spsr to SDRAM */ + mov r4, sp + mrs r5, spsr + mov r6, lr + stmia r8!, {r4-r6} + /* Save all ARM registers */ + /* Coprocessor access control register */ + mrc p15, 0, r6, c1, c0, 2 + stmia r8!, {r6} + /* TTBR0, TTBR1 and Translation table base control */ + mrc p15, 0, r4, c2, c0, 0 + mrc p15, 0, r5, c2, c0, 1 + mrc p15, 0, r6, c2, c0, 2 + stmia r8!, {r4-r6} + /* Domain access control register, data fault status register, + and instruction fault status register */ + mrc p15, 0, r4, c3, c0, 0 + mrc p15, 0, r5, c5, c0, 0 + mrc p15, 0, r6, c5, c0, 1 + stmia r8!, {r4-r6} + /* Data aux fault status register, instruction aux fault status, + datat fault address register and instruction fault address register*/ + mrc p15, 0, r4, c5, c1, 0 + mrc p15, 0, r5, c5, c1, 1 + mrc p15, 0, r6, c6, c0, 0 + mrc p15, 0, r7, c6, c0, 2 + stmia r8!, {r4-r7} + /* user r/w thread and process ID, user r/o thread and process ID, + priv only thread and process ID, cache size selection */ + mrc p15, 0, r4, c13, c0, 2 + mrc p15, 0, r5, c13, c0, 3 + mrc p15, 0, r6, c13, c0, 4 + mrc p15, 2, r7, c0, c0, 0 + stmia r8!, {r4-r7} + /* Data TLB lockdown, instruction TLB lockdown registers */ + mrc p15, 0, r5, c10, c0, 0 + mrc p15, 0, r6, c10, c0, 1 + stmia r8!, {r5-r6} + /* Secure or non secure vector base address, FCSE PID, Context PID*/ + mrc p15, 0, r4, c12, c0, 0 + mrc p15, 0, r5, c13, c0, 0 + mrc p15, 0, r6, c13, c0, 1 + stmia r8!, {r4-r6} + /* Primary remap, normal remap registers */ + mrc p15, 0, r4, c10, c2, 0 + mrc p15, 0, r5, c10, c2, 1 + stmia r8!,{r4-r5} + + /* Store current cpsr*/ + mrs r2, cpsr + stmia r8!, {r2} + + mrc p15, 0, r4, c1, c0, 0 + /* save control register */ + stmia r8!, {r4} +clean_caches: + /* Clean Data or unified cache to POU*/ + /* How to invalidate only L1 cache???? - #FIX_ME# */ + /* mcr p15, 0, r11, c7, c11, 1 */ + cmp r9, #1 /* Check whether L2 inval is required or not*/ + bne skip_l2_inval +clean_l2: + /* read clidr */ + mrc p15, 1, r0, c0, c0, 1 + /* extract loc from clidr */ + ands r3, r0, #0x7000000 + /* left align loc bit field */ + mov r3, r3, lsr #23 + /* if loc is 0, then no need to clean */ + beq finished + /* start clean at cache level 0 */ + mov r10, #0 +loop1: + /* work out 3x current cache level */ + add r2, r10, r10, lsr #1 + /* extract cache type bits from clidr*/ + mov r1, r0, lsr r2 + /* mask of the bits for current cache only */ + and r1, r1, #7 + /* see what cache we have at this level */ + cmp r1, #2 + /* skip if no cache, or just i-cache */ + blt skip + /* select current cache level in cssr */ + mcr p15, 2, r10, c0, c0, 0 + /* isb to sych the new cssr&csidr */ + isb + /* read the new csidr */ + mrc p15, 1, r1, c0, c0, 0 + /* extract the length of the cache lines */ + and r2, r1, #7 + /* add 4 (line length offset) */ + add r2, r2, #4 + ldr r4, assoc_mask + /* find maximum number on the way size */ + ands r4, r4, r1, lsr #3 + /* find bit position of way size increment */ + clz r5, r4 + ldr r7, numset_mask + /* extract max number of the index size*/ + ands r7, r7, r1, lsr #13 +loop2: + mov r9, r4 + /* create working copy of max way size*/ +loop3: + /* factor way and cache number into r11 */ + orr r11, r10, r9, lsl r5 + /* factor index number into r11 */ + orr r11, r11, r7, lsl r2 + /*clean & invalidate by set/way */ + mcr p15, 0, r11, c7, c10, 2 + /* decrement the way*/ + subs r9, r9, #1 + bge loop3 + /*decrement the index */ + subs r7, r7, #1 + bge loop2 +skip: + add r10, r10, #2 + /* increment cache number */ + cmp r3, r10 + bgt loop1 +finished: + /*swith back to cache level 0 */ + mov r10, #0 + /* select current cache level in cssr */ + mcr p15, 2, r10, c0, c0, 0 + isb +skip_l2_inval: + /* Data memory barrier and Data sync barrier */ + mov r1, #0 + mcr p15, 0, r1, c7, c10, 4 + mcr p15, 0, r1, c7, c10, 5 + + wfi @ wait for interrupt + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + bl i_dll_wait + /* restore regs and return */ + ldmfd sp!, {r0-r12, pc} + +i_dll_wait: + ldr r4, clk_stabilize_delay + +i_dll_delay: + subs r4, r4, #0x1 + bne i_dll_delay + ldr r4, sdrc_power + ldr r5, [r4] + bic r5, r5, #0x40 + str r5, [r4] + bx lr +pm_prepwstst_core: + .word PM_PREPWSTST_CORE_V +pm_prepwstst_mpu: + .word PM_PREPWSTST_MPU_V +pm_pwstctrl_mpu: + .word PM_PWSTCTRL_MPU_P +scratchpad_base: + .word SCRATCHPAD_BASE_P +sdrc_power: + .word SDRC_POWER_V +context_mem: + .word 0x803E3E14 +clk_stabilize_delay: + .word 0x000001FF +assoc_mask: + .word 0x3ff +numset_mask: + .word 0x7fff +ttbrbit_mask: + .word 0xFFFFC000 +table_index_mask: + .word 0xFFF00000 +table_entry: + .word 0x00000C02 +cache_pred_disable_mask: + .word 0xFFFFE7FB +ENTRY(omap34xx_cpu_suspend_sz) + .word . - omap34xx_cpu_suspend diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index af4bd34..bb29985 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -124,11 +124,11 @@ omap242x_sdi_cm_clksel2_pll: omap242x_sdi_sdrc_dlla_ctrl: .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL) omap242x_sdi_prcm_voltctrl: - .word OMAP242X_PRCM_VOLTCTRL + .word OMAP2420_PRCM_VOLTCTRL prcm_mask_val: .word 0xFFFF3FFC omap242x_sdi_timer_32ksynct_cr: - .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010) + .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ENTRY(omap242x_sram_ddr_init_sz) .word . - omap242x_sram_ddr_init @@ -220,11 +220,11 @@ omap242x_srs_sdrc_dlla_ctrl: omap242x_srs_sdrc_rfr_ctrl: .word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0) omap242x_srs_prcm_voltctrl: - .word OMAP242X_PRCM_VOLTCTRL + .word OMAP2420_PRCM_VOLTCTRL ddr_prcm_mask_val: .word 0xFFFF3FFC omap242x_srs_timer_32ksynct: - .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010) + .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ENTRY(omap242x_sram_reprogram_sdrc_sz) .word . - omap242x_sram_reprogram_sdrc @@ -305,7 +305,7 @@ wait_dll_lock: ldmfd sp!, {r0-r12, pc} @ restore regs and return omap242x_ssp_set_config: - .word OMAP242X_PRCM_CLKCFG_CTRL + .word OMAP2420_PRCM_CLKCFG_CTRL omap242x_ssp_pll_ctl: .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN) omap242x_ssp_pll_stat: diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index 84363e2..9955abc 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -124,11 +124,11 @@ omap243x_sdi_cm_clksel2_pll: omap243x_sdi_sdrc_dlla_ctrl: .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL) omap243x_sdi_prcm_voltctrl: - .word OMAP243X_PRCM_VOLTCTRL + .word OMAP2430_PRCM_VOLTCTRL prcm_mask_val: .word 0xFFFF3FFC omap243x_sdi_timer_32ksynct_cr: - .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010) + .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ENTRY(omap243x_sram_ddr_init_sz) .word . - omap243x_sram_ddr_init @@ -220,11 +220,11 @@ omap243x_srs_sdrc_dlla_ctrl: omap243x_srs_sdrc_rfr_ctrl: .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0) omap243x_srs_prcm_voltctrl: - .word OMAP243X_PRCM_VOLTCTRL + .word OMAP2430_PRCM_VOLTCTRL ddr_prcm_mask_val: .word 0xFFFF3FFC omap243x_srs_timer_32ksynct: - .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010) + .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ENTRY(omap243x_sram_reprogram_sdrc_sz) .word . - omap243x_sram_reprogram_sdrc @@ -305,7 +305,7 @@ wait_dll_lock: ldmfd sp!, {r0-r12, pc} @ restore regs and return omap243x_ssp_set_config: - .word OMAP243X_PRCM_CLKCFG_CTRL + .word OMAP2430_PRCM_CLKCFG_CTRL omap243x_ssp_pll_ctl: .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN) omap243x_ssp_pll_stat: diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 2c71461..c080c825 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -40,69 +40,74 @@ /* * Change frequency of core dpll * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2 + * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for + * SDRC rates < 83MHz */ ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack + ldr r4, [sp, #52] @ pull extra args off the stack + dsb @ flush buffered writes to interconnect cmp r3, #0x2 blne configure_sdrc - cmp r3, #0x2 + cmp r4, #0x1 + bleq unlock_dll blne lock_dll - cmp r3, #0x1 - blne unlock_dll bl sdram_in_selfrefresh @ put the SDRAM in self refresh bl configure_core_dpll bl enable_sdrc - cmp r3, #0x1 - blne wait_dll_unlock - cmp r3, #0x2 + cmp r4, #0x1 + bleq wait_dll_unlock blne wait_dll_lock cmp r3, #0x1 blne configure_sdrc + isb @ prevent speculative exec past here mov r0, #0 @ return value ldmfd sp!, {r1-r12, pc} @ restore regs and return unlock_dll: - ldr r4, omap3_sdrc_dlla_ctrl - ldr r5, [r4] - orr r5, r5, #0x4 - str r5, [r4] + ldr r11, omap3_sdrc_dlla_ctrl + ldr r12, [r11] + orr r12, r12, #0x4 + str r12, [r11] @ (no OCP barrier needed) bx lr lock_dll: - ldr r4, omap3_sdrc_dlla_ctrl - ldr r5, [r4] - bic r5, r5, #0x4 - str r5, [r4] + ldr r11, omap3_sdrc_dlla_ctrl + ldr r12, [r11] + bic r12, r12, #0x4 + str r12, [r11] @ (no OCP barrier needed) bx lr sdram_in_selfrefresh: - mov r5, #0x0 @ Move 0 to R5 - mcr p15, 0, r5, c7, c10, 5 @ memory barrier - ldr r4, omap3_sdrc_power @ read the SDRC_POWER register - ldr r5, [r4] @ read the contents of SDRC_POWER - orr r5, r5, #0x40 @ enable self refresh on idle req - str r5, [r4] @ write back to SDRC_POWER register - ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg - ldr r5, [r4] - bic r5, r5, #0x2 @ disable iclk bit for SRDC - str r5, [r4] + ldr r11, omap3_sdrc_power @ read the SDRC_POWER register + ldr r12, [r11] @ read the contents of SDRC_POWER + mov r9, r12 @ keep a copy of SDRC_POWER bits + orr r12, r12, #0x40 @ enable self refresh on idle req + bic r12, r12, #0x4 @ clear PWDENA + str r12, [r11] @ write back to SDRC_POWER register + ldr r12, [r11] @ posted-write barrier for SDRC + ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg + ldr r12, [r11] + bic r12, r12, #0x2 @ disable iclk bit for SDRC + str r12, [r11] wait_sdrc_idle: - ldr r4, omap3_cm_idlest1_core - ldr r5, [r4] - and r5, r5, #0x2 @ check for SDRC idle - cmp r5, #2 + ldr r11, omap3_cm_idlest1_core + ldr r12, [r11] + and r12, r12, #0x2 @ check for SDRC idle + cmp r12, #2 bne wait_sdrc_idle bx lr configure_core_dpll: - ldr r4, omap3_cm_clksel1_pll - ldr r5, [r4] - ldr r6, core_m2_mask_val @ modify m2 for core dpll - and r5, r5, r6 - orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val - str r5, [r4] - mov r5, #0x800 @ wait for the clock to stabilise + ldr r11, omap3_cm_clksel1_pll + ldr r12, [r11] + ldr r10, core_m2_mask_val @ modify m2 for core dpll + and r12, r12, r10 + orr r12, r12, r3, lsl #0x1B @ r3 contains the M2 val + str r12, [r11] + ldr r12, [r11] @ posted-write barrier for CM + mov r12, #0x800 @ wait for the clock to stabilise cmp r3, #2 bne wait_clk_stable bx lr wait_clk_stable: - subs r5, r5, #1 + subs r12, r12, #1 bne wait_clk_stable nop nop @@ -116,42 +121,42 @@ wait_clk_stable: nop bx lr enable_sdrc: - ldr r4, omap3_cm_iclken1_core - ldr r5, [r4] - orr r5, r5, #0x2 @ enable iclk bit for SDRC - str r5, [r4] + ldr r11, omap3_cm_iclken1_core + ldr r12, [r11] + orr r12, r12, #0x2 @ enable iclk bit for SDRC + str r12, [r11] wait_sdrc_idle1: - ldr r4, omap3_cm_idlest1_core - ldr r5, [r4] - and r5, r5, #0x2 - cmp r5, #0 + ldr r11, omap3_cm_idlest1_core + ldr r12, [r11] + and r12, r12, #0x2 + cmp r12, #0 bne wait_sdrc_idle1 - ldr r4, omap3_sdrc_power - ldr r5, [r4] - bic r5, r5, #0x40 - str r5, [r4] +restore_sdrc_power_val: + ldr r11, omap3_sdrc_power + str r9, [r11] @ restore SDRC_POWER, no barrier needed bx lr wait_dll_lock: - ldr r4, omap3_sdrc_dlla_status - ldr r5, [r4] - and r5, r5, #0x4 - cmp r5, #0x4 + ldr r11, omap3_sdrc_dlla_status + ldr r12, [r11] + and r12, r12, #0x4 + cmp r12, #0x4 bne wait_dll_lock bx lr wait_dll_unlock: - ldr r4, omap3_sdrc_dlla_status - ldr r5, [r4] - and r5, r5, #0x4 - cmp r5, #0x0 + ldr r11, omap3_sdrc_dlla_status + ldr r12, [r11] + and r12, r12, #0x4 + cmp r12, #0x0 bne wait_dll_unlock bx lr configure_sdrc: - ldr r4, omap3_sdrc_rfr_ctrl - str r0, [r4] - ldr r4, omap3_sdrc_actim_ctrla - str r1, [r4] - ldr r4, omap3_sdrc_actim_ctrlb - str r2, [r4] + ldr r11, omap3_sdrc_rfr_ctrl + str r0, [r11] + ldr r11, omap3_sdrc_actim_ctrla + str r1, [r11] + ldr r11, omap3_sdrc_actim_ctrlb + str r2, [r11] + ldr r2, [r11] @ posted-write barrier for SDRC bx lr omap3_sdrc_power: diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 1cb2c09..97eeeeb 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -3,6 +3,8 @@ * * OMAP2 GP timer support. * + * Copyright (C) 2009 Nokia Corporation + * * Update to use new clocksource/clockevent layers * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> * Copyright (C) 2007 MontaVista Software, Inc. @@ -15,9 +17,10 @@ * * Some parts based off of TI's 24xx code: * - * Copyright (C) 2004 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Texas Instruments, Inc. * * Roughly modelled after the OMAP1 MPU timer code. + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -35,9 +38,15 @@ #include <asm/mach/time.h> #include <mach/dmtimer.h> +#include <asm/localtimer.h> + +/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ +#define MAX_GPTIMER_ID 12 static struct omap_dm_timer *gptimer; static struct clock_event_device clockevent_gpt; +static u8 __initdata gptimer_id = 1; +static u8 __initdata inited; static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { @@ -75,7 +84,8 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, case CLOCK_EVT_MODE_PERIODIC: period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ; period -= 1; - + if (cpu_is_omap44xx()) + period = 0xff; /* FIXME: */ omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period); break; case CLOCK_EVT_MODE_ONESHOT: @@ -95,19 +105,55 @@ static struct clock_event_device clockevent_gpt = { .set_mode = omap2_gp_timer_set_mode, }; +/** + * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents + * @id: GPTIMER to use (1..MAX_GPTIMER_ID) + * + * Define the GPTIMER that the system should use for the tick timer. + * Meant to be called from board-*.c files in the event that GPTIMER1, the + * default, is unsuitable. Returns -EINVAL on error or 0 on success. + */ +int __init omap2_gp_clockevent_set_gptimer(u8 id) +{ + if (id < 1 || id > MAX_GPTIMER_ID) + return -EINVAL; + + BUG_ON(inited); + + gptimer_id = id; + + return 0; +} + static void __init omap2_gp_clockevent_init(void) { u32 tick_rate; + int src; - gptimer = omap_dm_timer_request_specific(1); + inited = 1; + + gptimer = omap_dm_timer_request_specific(gptimer_id); BUG_ON(gptimer == NULL); #if defined(CONFIG_OMAP_32K_TIMER) - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ); + src = OMAP_TIMER_SRC_32_KHZ; #else - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK); + src = OMAP_TIMER_SRC_SYS_CLK; + WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the " + "secure 32KiHz clock source\n"); #endif + + if (gptimer_id != 12) + WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)), + "timer-gp: omap_dm_timer_set_source() failed\n"); + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); + if (cpu_is_omap44xx()) + /* Assuming 32kHz clk is driving GPT1 */ + tick_rate = 32768; /* FIXME: */ + + pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n", + gptimer_id, tick_rate); omap2_gp_timer_irq.dev_id = (void *)gptimer; setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq); @@ -125,6 +171,8 @@ static void __init omap2_gp_clockevent_init(void) clockevents_register_device(&clockevent_gpt); } +/* Clocksource code */ + #ifdef CONFIG_OMAP_32K_TIMER /* * When 32k-timer is enabled, don't use GPTimer for clocksource @@ -182,6 +230,9 @@ static void __init omap2_gp_clocksource_init(void) static void __init omap2_gp_timer_init(void) { +#ifdef CONFIG_LOCAL_TIMERS + twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE); +#endif omap_dm_timer_init(); omap2_gp_clockevent_init(); diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c new file mode 100644 index 0000000..c1a650a --- /dev/null +++ b/arch/arm/mach-omap2/timer-mpu.c @@ -0,0 +1,34 @@ +/* + * The MPU local timer source file. In OMAP4, both cortex-a9 cores have + * own timer in it's MPU domain. These timers will be driving the + * linux kernel SMP tick framework when active. These timers are not + * part of the wake up domain. + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Author: + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This file is based on arm realview smp platform file. + * Copyright (C) 2002 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/clockchips.h> +#include <asm/irq.h> +#include <asm/smp_twd.h> +#include <asm/localtimer.h> + +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit local_timer_setup(struct clock_event_device *evt) +{ + evt->irq = INT_44XX_LOCALTIMER_IRQ; + twd_timer_setup(evt); +} + diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 34a56a1..d85296d 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -28,10 +28,20 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/pm.h> #include <mach/mux.h> #include <mach/usb.h> +#define OTG_SYSCONFIG (OMAP34XX_HSUSB_OTG_BASE + 0x404) + +static void __init usb_musb_pm_init(void) +{ + /* Ensure force-idle mode for OTG controller */ + if (cpu_is_omap34xx()) + omap_writel(0, OTG_SYSCONFIG); +} + +#ifdef CONFIG_USB_MUSB_SOC + static struct resource musb_resources[] = { [0] = { /* start and end set dynamically */ .flags = IORESOURCE_MEM, @@ -184,4 +194,13 @@ void __init usb_musb_init(void) printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n"); return; } + + usb_musb_pm_init(); +} + +#else +void __init usb_musb_init(void) +{ + usb_musb_pm_init(); } +#endif /* CONFIG_USB_MUSB_SOC */ diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 15e5090..8622c24 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk) unsigned sysclk_ps; int status; - if (!refclk_psec) + if (!refclk_psec || fclk_ps == 0) return -ENODEV; sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60; diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index c14d121..6f3f77d 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/mbus.h> #include <linux/io.h> +#include <linux/errno.h> #include <mach/hardware.h> #include "common.h" @@ -44,6 +45,7 @@ #define TARGET_DEV_BUS 1 #define TARGET_PCI 3 #define TARGET_PCIE 4 +#define TARGET_SRAM 9 #define ATTR_PCIE_MEM 0x59 #define ATTR_PCIE_IO 0x51 #define ATTR_PCIE_WA 0x79 @@ -53,6 +55,7 @@ #define ATTR_DEV_CS1 0x1d #define ATTR_DEV_CS2 0x1b #define ATTR_DEV_BOOT 0xf +#define ATTR_SRAM 0x0 /* * Helpers to get DDR bank info @@ -87,13 +90,13 @@ static int __init orion5x_cpu_win_can_remap(int win) return 0; } -static void __init setup_cpu_win(int win, u32 base, u32 size, +static int __init setup_cpu_win(int win, u32 base, u32 size, u8 target, u8 attr, int remap) { if (win >= 8) { printk(KERN_ERR "setup_cpu_win: trying to allocate " "window %d\n", win); - return; + return -ENOSPC; } writel(base & 0xffff0000, CPU_WIN_BASE(win)); @@ -107,6 +110,7 @@ static void __init setup_cpu_win(int win, u32 base, u32 size, writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win)); writel(0, CPU_WIN_REMAP_HI(win)); } + return 0; } void __init orion5x_setup_cpu_mbus_bridge(void) @@ -193,3 +197,9 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size) setup_cpu_win(win_alloc_count++, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1); } + +int __init orion5x_setup_sram_win(void) +{ + return setup_cpu_win(win_alloc_count, ORION5X_SRAM_PHYS_BASE, + ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1); +} diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 6af99dd..eafcc49 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -31,7 +31,7 @@ #include <plat/ehci-orion.h> #include <plat/mv_xor.h> #include <plat/orion_nand.h> -#include <plat/orion5x_wdt.h> +#include <plat/orion_wdt.h> #include <plat/time.h> #include "common.h" @@ -188,6 +188,9 @@ static struct platform_device orion5x_eth = { .id = 0, .num_resources = 1, .resource = orion5x_eth_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) @@ -248,12 +251,10 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = { static struct resource orion5x_i2c_resources[] = { { - .name = "i2c base", .start = I2C_PHYS_BASE, .end = I2C_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c irq", .start = IRQ_ORION5X_I2C, .end = IRQ_ORION5X_I2C, .flags = IORESOURCE_IRQ, @@ -535,16 +536,52 @@ void __init orion5x_xor_init(void) platform_device_register(&orion5x_xor1_channel); } +static struct resource orion5x_crypto_res[] = { + { + .name = "regs", + .start = ORION5X_CRYPTO_PHYS_BASE, + .end = ORION5X_CRYPTO_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, + }, { + .name = "sram", + .start = ORION5X_SRAM_PHYS_BASE, + .end = ORION5X_SRAM_PHYS_BASE + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "crypto interrupt", + .start = IRQ_ORION5X_CESA, + .end = IRQ_ORION5X_CESA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion5x_crypto_device = { + .name = "mv_crypto", + .id = -1, + .num_resources = ARRAY_SIZE(orion5x_crypto_res), + .resource = orion5x_crypto_res, +}; + +int __init orion5x_crypto_init(void) +{ + int ret; + + ret = orion5x_setup_sram_win(); + if (ret) + return ret; + + return platform_device_register(&orion5x_crypto_device); +} /***************************************************************************** * Watchdog ****************************************************************************/ -static struct orion5x_wdt_platform_data orion5x_wdt_data = { +static struct orion_wdt_platform_data orion5x_wdt_data = { .tclk = 0, }; static struct platform_device orion5x_wdt_device = { - .name = "orion5x_wdt", + .name = "orion_wdt", .id = -1, .dev = { .platform_data = &orion5x_wdt_data, diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 798b9a5..de483e8 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -26,6 +26,7 @@ void orion5x_setup_dev0_win(u32 base, u32 size); void orion5x_setup_dev1_win(u32 base, u32 size); void orion5x_setup_dev2_win(u32 base, u32 size); void orion5x_setup_pcie_wa_win(u32 base, u32 size); +int orion5x_setup_sram_win(void); void orion5x_ehci0_init(void); void orion5x_ehci1_init(void); @@ -37,6 +38,7 @@ void orion5x_spi_init(void); void orion5x_uart0_init(void); void orion5x_uart1_init(void); void orion5x_xor_init(void); +int orion5x_crypto_init(void); /* * PCIe/PCI functions. diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h index be896e5..5c9744c 100644 --- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -17,8 +17,8 @@ #define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104) -#define CPU_RESET_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108) -#define WDT_RESET 0x0002 +#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108) +#define WDT_RESET_OUT_EN 0x0002 #define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c) diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 377a773..2d87665 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -24,6 +24,7 @@ * f1000000 on-chip peripheral registers * f2000000 PCIe I/O space * f2100000 PCI I/O space + * f2200000 SRAM dedicated for the crypto unit * f4000000 device bus mappings (boot) * fa000000 device bus mappings (cs0) * fa800000 device bus mappings (cs2) @@ -49,6 +50,9 @@ #define ORION5X_PCI_IO_BUS_BASE 0x00100000 #define ORION5X_PCI_IO_SIZE SZ_1M +#define ORION5X_SRAM_PHYS_BASE (0xf2200000) +#define ORION5X_SRAM_SIZE SZ_8K + /* Relevant only for Orion-1/Orion-NAS */ #define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000 #define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000 @@ -94,6 +98,8 @@ #define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) #define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) +#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x90000) + #define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) #define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h index e912490..60e734c 100644 --- a/arch/arm/mach-orion5x/include/mach/system.h +++ b/arch/arm/mach-orion5x/include/mach/system.h @@ -23,7 +23,7 @@ static inline void arch_reset(char mode, const char *cmd) /* * Enable and issue soft reset */ - orion5x_setbits(CPU_RESET_MASK, (1 << 2)); + orion5x_setbits(RSTOUTn_MASK, (1 << 2)); orion5x_setbits(CPU_SOFT_RESET, 1); } diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index e23a3f9..bc4c3b9 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -124,6 +124,9 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode) u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL); u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL); + /* Initialize gpiolib. */ + orion_gpio_init(); + while (mode->mpp >= 0) { u32 *reg; int num_type; diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 41e6d50..61c086b 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -181,9 +181,9 @@ static void mss2_power_off(void) /* * Enable and issue soft reset */ - reg = readl(CPU_RESET_MASK); + reg = readl(RSTOUTn_MASK); reg |= 1 << 2; - writel(reg, CPU_RESET_MASK); + writel(reg, RSTOUTn_MASK); reg = readl(CPU_SOFT_RESET); reg |= 1; diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h index 0f9cdf4..37b3d48 100644 --- a/arch/arm/mach-orion5x/ts78xx-fpga.h +++ b/arch/arm/mach-orion5x/ts78xx-fpga.h @@ -25,6 +25,7 @@ struct fpga_devices { /* Technologic Systems */ struct fpga_device ts_rtc; struct fpga_device ts_nand; + struct fpga_device ts_rng; }; struct ts78xx_fpga_data { diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 9a6b397..5041d1b 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -17,6 +17,7 @@ #include <linux/m48t86.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/timeriomem-rng.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -270,12 +271,57 @@ static void ts78xx_ts_nand_unload(void) } /***************************************************************************** + * HW RNG + ****************************************************************************/ +#define TS_RNG_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x044) + +static struct resource ts78xx_ts_rng_resource = { + .flags = IORESOURCE_MEM, + .start = TS_RNG_DATA, + .end = TS_RNG_DATA + 4 - 1, +}; + +static struct timeriomem_rng_data ts78xx_ts_rng_data = { + .period = 1000000, /* one second */ +}; + +static struct platform_device ts78xx_ts_rng_device = { + .name = "timeriomem_rng", + .id = -1, + .dev = { + .platform_data = &ts78xx_ts_rng_data, + }, + .resource = &ts78xx_ts_rng_resource, + .num_resources = 1, +}; + +static int ts78xx_ts_rng_load(void) +{ + int rc; + + if (ts78xx_fpga.supports.ts_rng.init == 0) { + rc = platform_device_register(&ts78xx_ts_rng_device); + if (!rc) + ts78xx_fpga.supports.ts_rng.init = 1; + } else + rc = platform_device_add(&ts78xx_ts_rng_device); + + return rc; +}; + +static void ts78xx_ts_rng_unload(void) +{ + platform_device_del(&ts78xx_ts_rng_device); +} + +/***************************************************************************** * FPGA 'hotplug' support code ****************************************************************************/ static void ts78xx_fpga_devices_zero_init(void) { ts78xx_fpga.supports.ts_rtc.init = 0; ts78xx_fpga.supports.ts_nand.init = 0; + ts78xx_fpga.supports.ts_rng.init = 0; } static void ts78xx_fpga_supports(void) @@ -289,10 +335,12 @@ static void ts78xx_fpga_supports(void) case TS7800_REV_5: ts78xx_fpga.supports.ts_rtc.present = 1; ts78xx_fpga.supports.ts_nand.present = 1; + ts78xx_fpga.supports.ts_rng.present = 1; break; default: ts78xx_fpga.supports.ts_rtc.present = 0; ts78xx_fpga.supports.ts_nand.present = 0; + ts78xx_fpga.supports.ts_rng.present = 0; } } @@ -316,6 +364,14 @@ static int ts78xx_fpga_load_devices(void) } ret |= tmp; } + if (ts78xx_fpga.supports.ts_rng.present == 1) { + tmp = ts78xx_ts_rng_load(); + if (tmp) { + printk(KERN_INFO "TS-78xx: RNG not registered\n"); + ts78xx_fpga.supports.ts_rng.present = 0; + } + ret |= tmp; + } return ret; } @@ -328,6 +384,8 @@ static int ts78xx_fpga_unload_devices(void) ts78xx_ts_rtc_unload(); if (ts78xx_fpga.supports.ts_nand.present == 1) ts78xx_ts_nand_unload(); + if (ts78xx_fpga.supports.ts_rng.present == 1) + ts78xx_ts_rng_unload(); return ret; } diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 7ddc22c..6920821 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -15,6 +15,7 @@ #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> +#include <net/dsa.h> #include <asm/mach-types.h> #include <asm/gpio.h> #include <asm/mach/arch.h> @@ -97,6 +98,20 @@ static struct mv643xx_eth_platform_data wnr854t_eth_data = { .duplex = DUPLEX_FULL, }; +static struct dsa_chip_data wnr854t_switch_chip_data = { + .port_names[0] = "lan3", + .port_names[1] = "lan4", + .port_names[2] = "wan", + .port_names[3] = "cpu", + .port_names[5] = "lan1", + .port_names[7] = "lan2", +}; + +static struct dsa_platform_data wnr854t_switch_plat_data = { + .nr_chips = 1, + .chip = &wnr854t_switch_chip_data, +}; + static void __init wnr854t_init(void) { /* @@ -110,6 +125,7 @@ static void __init wnr854t_init(void) * Configure peripherals. */ orion5x_eth_init(&wnr854t_eth_data); + orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ); orion5x_uart0_init(); orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE, diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 3e66d90..17d3fbd 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -289,12 +289,12 @@ config MACH_LITTLETON config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" select PXA3xx - select PXA930 + select CPU_PXA930 config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select PXA3xx - select PXA930 + select CPU_PXA930 config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index db52d2c..49ae382 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -86,20 +86,3 @@ void clks_register(struct clk_lookup *clks, size_t num) for (i = 0; i < num; i++) clkdev_add(&clks[i]); } - -int clk_add_alias(const char *alias, const char *alias_dev_name, char *id, - struct device *dev) -{ - struct clk *r = clk_get(dev, id); - struct clk_lookup *l; - - if (!r) - return -ENODEV; - - l = clkdev_alloc(r, alias, alias_dev_name); - clk_put(r); - if (!l) - return -ENODEV; - clkdev_add(l); - return 0; -} diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index cdf21dd..930e364 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -427,12 +427,22 @@ static struct pxa2xx_spi_master corgi_spi_info = { .num_chipselect = 3, }; +static void corgi_wait_for_hsync(void) +{ + while (gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data corgi_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = CORGI_GPIO_TP_INT, + .wait_for_sync = corgi_wait_for_hsync, }; static void corgi_ads7846_cs(u32 command) diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 92ba16e..7db966d 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -111,9 +111,9 @@ static unsigned long ezx_pin_config[] __initdata = { GPIO25_SSP1_TXD, GPIO26_SSP1_RXD, GPIO24_GPIO, /* pcap chip select */ - GPIO1_GPIO, /* pcap interrupt */ - GPIO4_GPIO, /* WDI_AP */ - GPIO55_GPIO, /* SYS_RESTART */ + GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */ + GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */ + GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */ /* MMC */ GPIO32_MMC_CLK, @@ -144,20 +144,20 @@ static unsigned long ezx_pin_config[] __initdata = { #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680) static unsigned long gen1_pin_config[] __initdata = { /* flip / lockswitch */ - GPIO12_GPIO, + GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth (bcm2035) */ - GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */ + GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */ GPIO48_GPIO, /* RESET */ GPIO28_GPIO, /* WAKEUP */ /* Neptune handshake */ - GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */ - GPIO57_GPIO, /* AP_RDY */ - GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */ - GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */ - GPIO82_GPIO, /* RESET */ - GPIO99_GPIO, /* TC_MM_EN */ + GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */ + GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */ + GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */ + GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */ + GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */ + GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */ /* sound */ GPIO52_SSP3_SCLK, @@ -199,21 +199,21 @@ static unsigned long gen1_pin_config[] __initdata = { defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6) static unsigned long gen2_pin_config[] __initdata = { /* flip / lockswitch */ - GPIO15_GPIO, + GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH, /* EOC */ - GPIO10_GPIO, + GPIO10_GPIO | WAKEUP_ON_EDGE_RISE, /* bluetooth (bcm2045) */ - GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */ + GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */ GPIO37_GPIO, /* RESET */ GPIO57_GPIO, /* WAKEUP */ /* Neptune handshake */ - GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */ - GPIO96_GPIO, /* AP_RDY */ - GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */ - GPIO116_GPIO, /* RESET */ + GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */ + GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */ + GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */ + GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */ GPIO41_GPIO, /* BP_FLASH */ /* sound */ diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index fb13c82..8721b80 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -56,7 +56,6 @@ #define GPIO_NR_PALMLD_LED_AMBER 94 /* IDE */ -#define GPIO_NR_PALMLD_IDE_IRQ 95 #define GPIO_NR_PALMLD_IDE_RESET 98 #define GPIO_NR_PALMLD_IDE_PWEN 115 diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h index 31e6a7b..b6c1055 100644 --- a/arch/arm/mach-pxa/include/mach/reset.h +++ b/arch/arm/mach-pxa/include/mach/reset.h @@ -13,8 +13,9 @@ extern void clear_reset_status(unsigned int mask); /** * init_gpio_reset() - register GPIO as reset generator * @gpio: gpio nr - * @output: set gpio as out/low instead of input during normal work + * @output: set gpio as output instead of input during normal work + * @level: output level */ -extern int init_gpio_reset(int gpio, int output); +extern int init_gpio_reset(int gpio, int output, int level); #endif /* __ASM_ARCH_RESET_H */ diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index e13f6a8..c872b9f 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -334,6 +334,11 @@ static struct led_info littleton_da9034_leds[] = { }, }; +static struct da9034_touch_pdata littleton_da9034_touch = { + .x_inverted = 1, + .interval_ms = 20, +}; + static struct da903x_subdev_info littleton_da9034_subdevs[] = { { .name = "da903x-led", @@ -350,6 +355,10 @@ static struct da903x_subdev_info littleton_da9034_subdevs[] = { }, { .name = "da903x-backlight", .id = DA9034_ID_WLED, + }, { + .name = "da9034-touch", + .id = DA9034_ID_TOUCH, + .platform_data = &littleton_da9034_touch, }, }; diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 7ffb91d..cf6b720 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -322,6 +322,7 @@ static inline void pxa27x_mfp_init(void) {} #ifdef CONFIG_PM static unsigned long saved_gafr[2][4]; static unsigned long saved_gpdr[4]; +static unsigned long saved_pgsr[4]; static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) { @@ -332,6 +333,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) saved_gafr[0][i] = GAFR_L(i); saved_gafr[1][i] = GAFR_U(i); saved_gpdr[i] = GPDR(i * 32); + saved_pgsr[i] = PGSR(i); GPDR(i * 32) = gpdr_lpm[i]; } @@ -346,6 +348,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d) GAFR_L(i) = saved_gafr[0][i]; GAFR_U(i) = saved_gafr[1][i]; GPDR(i * 32) = saved_gpdr[i]; + PGSR(i) = saved_pgsr[i]; } PSSR = PSSR_RDH | PSSR_PH; return 0; @@ -374,6 +377,9 @@ static int __init pxa2xx_mfp_init(void) if (cpu_is_pxa27x()) pxa27x_mfp_init(); + /* clear RDH bit to enable GPIO receivers after reset/sleep exit */ + PSSR = PSSR_RDH; + /* initialize gafr_run[], pgsr_lpm[] from existing values */ for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) gpdr_lpm[i] = GPDR(i * 32); diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 1cec180..2e65f05 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -62,6 +62,8 @@ static unsigned long palmld_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, + GPIO95_AC97_nRESET, /* IrDA */ GPIO108_GPIO, /* ir disable */ @@ -127,7 +129,7 @@ static unsigned long palmld_pin_config[] __initdata = { GPIO81_GPIO, /* wifi reset */ /* HDD */ - GPIO95_GPIO, /* HDD irq */ + GPIO98_GPIO, /* HDD reset */ GPIO115_GPIO, /* HDD power */ /* MISC */ @@ -494,6 +496,14 @@ static struct platform_device palmld_asoc = { }; /****************************************************************************** + * HDD + ******************************************************************************/ +static struct platform_device palmld_hdd = { + .name = "pata_palmld", + .id = -1, +}; + +/****************************************************************************** * Framebuffer ******************************************************************************/ static struct pxafb_mode_info palmld_lcd_modes[] = { @@ -557,6 +567,7 @@ static struct platform_device *devices[] __initdata = { &palmld_leds, &power_supply, &palmld_asoc, + &palmld_hdd, }; static struct map_desc palmld_io_desc[] __initdata = { diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 3066236..05bf979 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, GPIO95_AC97_nRESET, /* IrDA */ diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index e2d44b1..e99a893 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -65,6 +65,7 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, GPIO95_AC97_nRESET, /* IrDA */ diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index df29d45..01e9d64 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -20,7 +20,7 @@ static void do_hw_reset(void); static int reset_gpio = -1; -int init_gpio_reset(int gpio, int output) +int init_gpio_reset(int gpio, int output, int level) { int rc; @@ -31,7 +31,7 @@ int init_gpio_reset(int gpio, int output) } if (output) - rc = gpio_direction_output(gpio, 0); + rc = gpio_direction_output(gpio, level); else rc = gpio_direction_input(gpio); if (rc) { diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 8c61dda..5a45fe3 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -299,12 +299,22 @@ static struct pxa2xx_spi_master spitz_spi_info = { .num_chipselect = 3, }; +static void spitz_wait_for_hsync(void) +{ + while (gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data spitz_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = SPITZ_GPIO_TP_INT, + .wait_for_sync = spitz_wait_for_hsync, }; static void spitz_ads7846_cs(u32 command) @@ -521,9 +531,15 @@ static int spitz_ohci_init(struct device *dev) return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1); } +static void spitz_ohci_exit(struct device *dev) +{ + gpio_free(SPITZ_GPIO_USB_HOST); +} + static struct pxaohci_platform_data spitz_ohci_platform_data = { .port_mode = PMM_NPS_MODE, .init = spitz_ohci_init, + .exit = spitz_ohci_exit, .flags = ENABLE_PORT_ALL | NO_OC_PROTECTION, .power_budget = 150, }; @@ -721,7 +737,7 @@ static void spitz_restart(char mode, const char *cmd) static void __init common_init(void) { - init_gpio_reset(SPITZ_GPIO_ON_RESET, 1); + init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0); pm_power_off = spitz_poweroff; arm_pm_restart = spitz_restart; diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index afac5b6..a0bd46e 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -897,7 +897,7 @@ static void __init tosa_init(void) gpio_set_wake(MFP_PIN_GPIO1, 1); /* We can't pass to gpio-keys since it will drop the Reset altfunc */ - init_gpio_reset(TOSA_GPIO_ON_RESET, 0); + init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0); pm_power_off = tosa_poweroff; arm_pm_restart = tosa_restart; diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 0e65344..dd031cc 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -46,6 +46,7 @@ #include <mach/audio.h> #include <mach/pxafb.h> #include <mach/i2c.h> +#include <mach/regs-uart.h> #include <mach/viper.h> #include <asm/setup.h> diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index c1f7320..c256c57 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -72,6 +72,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO25_AC97_SDATA_IN_0, GPIO27_AC97_SDATA_OUT, GPIO28_AC97_SYNC, + GPIO17_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO91_SSP3_SCLK, @@ -126,6 +127,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { /* Standard I2C */ GPIO21_I2C_SCL, GPIO22_I2C_SDA, + + /* GPIO */ + GPIO18_GPIO, /* GPIO Expander #0 INT_N */ + GPIO19_GPIO, /* GPIO Expander #1 INT_N */ }; static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 4e1c488..cc5a228 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -68,6 +68,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO38_AC97_SYNC, GPIO39_AC97_BITCLK, GPIO40_AC97_nACRESET, + GPIO36_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO89_SSP3_SCLK, diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index b6ec106..bf35cfd 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -24,7 +24,6 @@ config REALVIEW_EB_ARM11MP config REALVIEW_EB_ARM11MP_REVB bool "Support ARM11MPCore RevB tile" depends on REALVIEW_EB_ARM11MP - default n help Enable support for the ARM11MPCore RevB tile on the Realview platform. Since there are device address differences, a diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index 7bea8ff..e13d094 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -7,5 +7,6 @@ obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 942e1a7..076acbc 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -750,14 +750,6 @@ void __init realview_timer_init(unsigned int timer_irq) { u32 val; -#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST - /* - * The dummy clock device has to be registered before the main device - * so that the latter will broadcast the clock events - */ - local_timer_setup(); -#endif - /* * set clock frequency: * REALVIEW_REFCLK is 32KHz diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 21c0863..59a337b 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -51,9 +51,6 @@ extern struct mmc_platform_data realview_mmc0_plat_data; extern struct mmc_platform_data realview_mmc1_plat_data; extern struct clcd_board clcd_plat_data; extern void __iomem *gic_cpu_base_addr; -#ifdef CONFIG_LOCAL_TIMERS -extern void __iomem *twd_base; -#endif extern void __iomem *timer0_va_base; extern void __iomem *timer1_va_base; extern void __iomem *timer2_va_base; diff --git a/arch/arm/mach-realview/include/mach/scu.h b/arch/arm/mach-realview/include/mach/scu.h deleted file mode 100644 index d55802d..0000000 --- a/arch/arm/mach-realview/include/mach/scu.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASMARM_ARCH_SCU_H -#define __ASMARM_ARCH_SCU_H - -/* - * SCU registers - */ -#define SCU_CTRL 0x00 -#define SCU_CONFIG 0x04 -#define SCU_CPU_STATUS 0x08 -#define SCU_INVALIDATE 0x0c -#define SCU_FPGA_REVISION 0x10 - -#endif diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h index 515819e..dd53892 100644 --- a/arch/arm/mach-realview/include/mach/smp.h +++ b/arch/arm/mach-realview/include/mach/smp.h @@ -15,16 +15,9 @@ /* * We use IRQ1 as the IPI */ -static inline void smp_cross_call(cpumask_t callmap) -{ - gic_raise_softirq(callmap, 1); -} - -/* - * Do nothing on MPcore. - */ -static inline void smp_cross_call_done(cpumask_t callmap) +static inline void smp_cross_call(const struct cpumask *mask) { + gic_raise_softirq(mask, 1); } #endif diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c index d0d39ad..60b4e11 100644 --- a/arch/arm/mach-realview/localtimer.c +++ b/arch/arm/mach-realview/localtimer.c @@ -9,194 +9,18 @@ * published by the Free Software Foundation. */ #include <linux/init.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/device.h> #include <linux/smp.h> -#include <linux/jiffies.h> -#include <linux/percpu.h> #include <linux/clockchips.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <asm/hardware/arm_twd.h> -#include <asm/hardware/gic.h> -#include <mach/hardware.h> #include <asm/irq.h> - -static DEFINE_PER_CPU(struct clock_event_device, local_clockevent); - -/* - * Used on SMP for either the local timer or IPI_TIMER - */ -void local_timer_interrupt(void) -{ - struct clock_event_device *clk = &__get_cpu_var(local_clockevent); - - clk->event_handler(clk); -} - -#ifdef CONFIG_LOCAL_TIMERS - -/* set up by the platform code */ -void __iomem *twd_base; - -static unsigned long mpcore_timer_rate; - -static void local_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ - unsigned long ctrl; - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - /* timer load already set up */ - ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE - | TWD_TIMER_CONTROL_PERIODIC; - break; - case CLOCK_EVT_MODE_ONESHOT: - /* period set, and timer enabled in 'next_event' hook */ - ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT; - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - default: - ctrl = 0; - } - - __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL); -} - -static int local_timer_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL); - - __raw_writel(evt, twd_base + TWD_TIMER_COUNTER); - __raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, twd_base + TWD_TIMER_CONTROL); - - return 0; -} - -/* - * local_timer_ack: checks for a local timer interrupt. - * - * If a local timer interrupt has occurred, acknowledge and return 1. - * Otherwise, return 0. - */ -int local_timer_ack(void) -{ - if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) { - __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); - return 1; - } - - return 0; -} - -static void __cpuinit twd_calibrate_rate(void) -{ - unsigned long load, count; - u64 waitjiffies; - - /* - * If this is the first time round, we need to work out how fast - * the timer ticks - */ - if (mpcore_timer_rate == 0) { - printk("Calibrating local timer... "); - - /* Wait for a tick to start */ - waitjiffies = get_jiffies_64() + 1; - - while (get_jiffies_64() < waitjiffies) - udelay(10); - - /* OK, now the tick has started, let's get the timer going */ - waitjiffies += 5; - - /* enable, no interrupt or reload */ - __raw_writel(0x1, twd_base + TWD_TIMER_CONTROL); - - /* maximum value */ - __raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER); - - while (get_jiffies_64() < waitjiffies) - udelay(10); - - count = __raw_readl(twd_base + TWD_TIMER_COUNTER); - - mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); - - printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000, - (mpcore_timer_rate / 100000) % 100); - } - - load = mpcore_timer_rate / HZ; - - __raw_writel(load, twd_base + TWD_TIMER_LOAD); -} +#include <asm/smp_twd.h> +#include <asm/localtimer.h> /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(void) -{ - unsigned int cpu = smp_processor_id(); - struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); - unsigned long flags; - - twd_calibrate_rate(); - - clk->name = "local_timer"; - clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; - clk->rating = 350; - clk->set_mode = local_timer_set_mode; - clk->set_next_event = local_timer_set_next_event; - clk->irq = IRQ_LOCALTIMER; - clk->cpumask = cpumask_of(cpu); - clk->shift = 20; - clk->mult = div_sc(mpcore_timer_rate, NSEC_PER_SEC, clk->shift); - clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk); - clk->min_delta_ns = clockevent_delta2ns(0xf, clk); - - /* Make sure our local interrupt controller has this enabled */ - local_irq_save(flags); - get_irq_chip(IRQ_LOCALTIMER)->unmask(IRQ_LOCALTIMER); - local_irq_restore(flags); - - clockevents_register_device(clk); -} - -/* - * take a local timer down - */ -void __cpuexit local_timer_stop(void) +void __cpuinit local_timer_setup(struct clock_event_device *evt) { - __raw_writel(0, twd_base + TWD_TIMER_CONTROL); + evt->irq = IRQ_LOCALTIMER; + twd_timer_setup(evt); } - -#else /* CONFIG_LOCAL_TIMERS */ - -static void dummy_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ -} - -void __cpuinit local_timer_setup(void) -{ - unsigned int cpu = smp_processor_id(); - struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); - - clk->name = "dummy_timer"; - clk->features = CLOCK_EVT_FEAT_DUMMY; - clk->rating = 200; - clk->mult = 1; - clk->set_mode = dummy_timer_set_mode; - clk->broadcast = smp_timer_broadcast; - clk->cpumask = cpumask_of(cpu); - - clockevents_register_device(clk); -} - -#endif /* !CONFIG_LOCAL_TIMERS */ diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index ea3c755..ca74217 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -19,10 +19,11 @@ #include <asm/cacheflush.h> #include <mach/hardware.h> #include <asm/mach-types.h> +#include <asm/localtimer.h> #include <mach/board-eb.h> #include <mach/board-pb11mp.h> -#include <mach/scu.h> +#include <asm/smp_scu.h> #include "core.h" @@ -44,31 +45,12 @@ static void __iomem *scu_base_addr(void) return (void __iomem *)0; } -static unsigned int __init get_core_count(void) +static inline unsigned int get_core_count(void) { - unsigned int ncores; void __iomem *scu_base = scu_base_addr(); - - if (scu_base) { - ncores = __raw_readl(scu_base + SCU_CONFIG); - ncores = (ncores & 0x03) + 1; - } else - ncores = 1; - - return ncores; -} - -/* - * Setup the SCU - */ -static void scu_enable(void) -{ - u32 scu_ctrl; - void __iomem *scu_base = scu_base_addr(); - - scu_ctrl = __raw_readl(scu_base + SCU_CTRL); - scu_ctrl |= 1; - __raw_writel(scu_ctrl, scu_base + SCU_CTRL); + if (scu_base) + return scu_get_core_count(scu_base); + return 1; } static DEFINE_SPINLOCK(boot_lock); @@ -78,13 +60,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu) trace_hardirqs_off(); /* - * the primary core may have used a "cross call" soft interrupt - * to get this processor out of WFI in the BootMonitor - make - * sure that we are no longer being sent this soft interrupt - */ - smp_cross_call_done(cpumask_of_cpu(cpu)); - - /* * if any interrupts are already enabled for the primary * core (e.g. timer irq), then they will not have been enabled * for us: do so @@ -136,7 +111,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * Use smp_cross_call() for this, since there's little * point duplicating the code here */ - smp_cross_call(cpumask_of_cpu(cpu)); + smp_cross_call(cpumask_of(cpu)); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { @@ -191,7 +166,7 @@ void __init smp_init_cpus(void) unsigned int i, ncores = get_core_count(); for (i = 0; i < ncores; i++) - cpu_set(i, cpu_possible_map); + set_cpu_possible(i, true); } void __init smp_prepare_cpus(unsigned int max_cpus) @@ -224,21 +199,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus) if (max_cpus > ncores) max_cpus = ncores; -#ifdef CONFIG_LOCAL_TIMERS - /* - * Enable the local timer for primary CPU. If the device is - * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in - * realview_timer_init - */ - local_timer_setup(); -#endif - /* * Initialise the present map, which describes the set of CPUs * actually populated at the present time. */ for (i = 0; i < max_cpus; i++) - cpu_set(i, cpu_present_map); + set_cpu_present(i, true); /* * Initialise the SCU if there are more than one CPU and let @@ -248,7 +214,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus) * WFI */ if (max_cpus > 1) { - scu_enable(); + /* + * Enable the local timer or broadcast device for the + * boot CPU, but only if we have more than one CPU. + */ + percpu_timer_setup(); + + scu_enable(scu_base_addr()); poke_milo(); } } diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index c20fbef..8dfa44e 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -32,6 +32,7 @@ #include <asm/hardware/gic.h> #include <asm/hardware/icst307.h> #include <asm/hardware/cache-l2x0.h> +#include <asm/localtimer.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index ea1e60e..dc4b169 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -32,6 +32,7 @@ #include <asm/hardware/gic.h> #include <asm/hardware/icst307.h> #include <asm/hardware/cache-l2x0.h> +#include <asm/localtimer.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 31af898..ce3baba2 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -589,8 +589,6 @@ static void __init bast_map_io(void) s3c_device_nand.dev.platform_data = &bast_nand_info; - s3c_i2c0_set_platdata(&bast_i2c_info); - s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); @@ -601,6 +599,7 @@ static void __init bast_init(void) sysdev_class_register(&bast_pm_sysclass); sysdev_register(&bast_pm_sysdev); + s3c_i2c0_set_platdata(&bast_i2c_info); s3c24xx_fb_set_platdata(&bast_fb_info); platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices)); diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index c9cfe40..a7417c4 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <asm/cacheflush.h> #include <asm/irq.h> #include <mach/regs-power.h> @@ -39,6 +40,8 @@ static void s3c2412_cpu_suspend(void) { unsigned long tmp; + flush_cache_all(); + /* set our standby method to sleep */ tmp = __raw_readl(S3C2412_PWRCFG); diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index 7a1e5a2..5057d99 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -42,6 +42,8 @@ #define S3C64XX_PA_USB_HSOTG (0x7C000000) #define S3C64XX_PA_WATCHDOG (0x7E004000) #define S3C64XX_PA_SYSCON (0x7E00F000) +#define S3C64XX_PA_IIS0 (0x7F002000) +#define S3C64XX_PA_IIS1 (0x7F003000) #define S3C64XX_PA_TIMER (0x7F006000) #define S3C64XX_PA_IIC0 (0x7F004000) #define S3C64XX_PA_IIC1 (0x7F00F000) diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 0cd5269..1f940df 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -9,6 +9,7 @@ #include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> +#include <asm/page.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index c39c788..69214fc 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -413,7 +413,7 @@ static struct clk ref24_clk = { .rate = 24000000, }; -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { { /* UART0 */ .dev_id = "dev:f1", .clk = &ref24_clk, diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 2097956..b9bd481 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -642,7 +642,6 @@ config CPU_BIG_ENDIAN config CPU_HIGH_VECTOR depends on !MMU && CPU_CP15 && !CPU_ARM740T bool "Select the High exception vector" - default n help Say Y here to select high exception vector(0xFFFF0000~). The exception vector can be vary depending on the platform @@ -726,7 +725,6 @@ config NEEDS_SYSCALL_FOR_CMPXCHG config OUTER_CACHE bool - default n config CACHE_FEROCEON_L2 bool "Enable the Feroceon L2 cache controller" @@ -739,7 +737,6 @@ config CACHE_FEROCEON_L2 config CACHE_FEROCEON_L2_WRITETHROUGH bool "Force Feroceon L2 cache write through" depends on CACHE_FEROCEON_L2 - default n help Say Y here to use the Feroceon L2 cache in writethrough mode. Unless you specifically require this, say N for writeback mode. diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 2c6c2a7..8f5c13f 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -20,6 +20,31 @@ #define D_CACHE_LINE_SIZE 32 #define BTB_FLUSH_SIZE 8 +#ifdef CONFIG_ARM_ERRATA_411920 +/* + * Invalidate the entire I cache (this code is a workaround for the ARM1136 + * erratum 411920 - Invalidate Instruction Cache operation can fail. This + * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore. + * + * Registers: + * r0 - set to 0 + * r1 - corrupted + */ +ENTRY(v6_icache_inval_all) + mov r0, #0 + mrs r1, cpsr + cpsid ifa @ disable interrupts + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + msr cpsr_cx, r1 @ restore interrupts + .rept 11 @ ARM Ltd recommends at least + nop @ 11 NOPs + .endr + mov pc, lr +#endif + /* * v6_flush_cache_all() * @@ -31,8 +56,12 @@ ENTRY(v6_flush_kern_cache_all) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else + b v6_icache_inval_all +#endif +#else mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate #endif mov pc, lr @@ -103,8 +132,12 @@ ENTRY(v6_coherent_user_range) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c10, 4 @ drain write buffer +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else + b v6_icache_inval_all +#endif +#else mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB #endif mov pc, lr diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 4e28348..c07222e 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -18,6 +18,10 @@ #include "mm.h" +#ifdef CONFIG_ARM_ERRATA_411920 +extern void v6_icache_inval_all(void); +#endif + #ifdef CONFIG_CPU_CACHE_VIPT #define ALIAS_FLUSH_START 0xffff4000 @@ -32,10 +36,15 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) asm( "mcrr p15, 0, %1, %0, c14\n" " mcr p15, 0, %2, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %2, c7, c5, 0\n" +#endif : : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } void flush_cache_mm(struct mm_struct *mm) @@ -48,11 +57,16 @@ void flush_cache_mm(struct mm_struct *mm) if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } @@ -67,11 +81,16 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 9f88dd3..0ab75c6 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -110,6 +110,12 @@ static int remap_area_pages(unsigned long start, unsigned long pfn, return err; } +int ioremap_page(unsigned long virt, unsigned long phys, + const struct mem_type *mtype) +{ + return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, mtype); +} +EXPORT_SYMBOL(ioremap_page); void __check_kvm_seq(struct mm_struct *mm) { diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e6344ec..70974d7 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -255,6 +255,7 @@ const struct mem_type *get_mem_type(unsigned int type) { return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL; } +EXPORT_SYMBOL(get_mem_type); /* * Adjust the PMD section entries according to the CPU in use. diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index c221e26..3397f1e 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -96,6 +96,9 @@ ENTRY(cpu_v7_switch_mm) mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id orr r0, r0, #TTB_FLAGS +#ifdef CONFIG_ARM_ERRATA_430973 + mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB +#endif mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID isb 1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -181,6 +184,22 @@ __v7_setup: stmia r12, {r0-r5, r7, r9, r11, lr} bl v7_flush_dcache_all ldmia r12, {r0-r5, r7, r9, r11, lr} +#ifdef CONFIG_ARM_ERRATA_430973 + mrc p15, 0, r10, c1, c0, 1 @ read aux control register + orr r10, r10, #(1 << 6) @ set IBE to 1 + mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_458693 + mrc p15, 0, r10, c1, c0, 1 @ read aux control register + orr r10, r10, #(1 << 5) @ set L1NEON to 1 + orr r10, r10, #(1 << 9) @ set PLDNOP to 1 + mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_460075 + mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register + orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit + mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register +#endif mov r10, #0 #ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h index 386cbd1..d3a6f92 100644 --- a/arch/arm/nwfpe/fpa11.h +++ b/arch/arm/nwfpe/fpa11.h @@ -114,4 +114,8 @@ extern unsigned int SingleCPDO(struct roundingData *roundData, extern unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd); +/* extneded_cpdo.c */ +extern unsigned int ExtendedCPDO(struct roundingData *roundData, + const unsigned int opcode, FPREG * rFd); + #endif diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c index 9843dc5..31c4eee 100644 --- a/arch/arm/nwfpe/fpa11_cprt.c +++ b/arch/arm/nwfpe/fpa11_cprt.c @@ -27,10 +27,6 @@ #include "fpmodule.inl" #include "softfloat.h" -#ifdef CONFIG_FPE_NWFPE_XP -extern flag floatx80_is_nan(floatx80); -#endif - unsigned int PerformFLT(const unsigned int opcode); unsigned int PerformFIX(const unsigned int opcode); diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h index 260fe29..13e479c 100644 --- a/arch/arm/nwfpe/softfloat.h +++ b/arch/arm/nwfpe/softfloat.h @@ -226,6 +226,8 @@ char floatx80_le_quiet( floatx80, floatx80 ); char floatx80_lt_quiet( floatx80, floatx80 ); char floatx80_is_signaling_nan( floatx80 ); +extern flag floatx80_is_nan(floatx80); + #endif static inline flag extractFloat32Sign(float32 a) diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 17d0e99..8986b741 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -48,7 +48,14 @@ config MXC_IRQ_PRIOR config MXC_PWM tristate "Enable PWM driver" depends on ARCH_MXC + select HAVE_PWM help Enable support for the i.MX PWM controller(s). +config ARCH_HAS_RNGA + bool + depends on ARCH_MXC + +config ARCH_MXC_IOMUX_V3 + bool endif diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 0554063..e3212c8 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -7,4 +7,5 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o +obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_PWM) += pwm.o diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c index e364a5e..7764643 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -693,12 +693,15 @@ int imx_dma_request(int channel, const char *name) local_irq_restore(flags); return -EBUSY; } + memset(imxdma, 0, sizeof(imxdma)); + imxdma->name = name; + local_irq_restore(flags); /* request_irq() can block */ #ifdef CONFIG_ARCH_MX2 ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA", NULL); if (ret) { - local_irq_restore(flags); + imxdma->name = NULL; printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n", MXC_INT_DMACH0 + channel, channel); return ret; @@ -708,13 +711,6 @@ int imx_dma_request(int channel, const char *name) imxdma->watchdog.data = channel; #endif - imxdma->name = name; - imxdma->irq_handler = NULL; - imxdma->err_handler = NULL; - imxdma->data = NULL; - imxdma->sg = NULL; - - local_irq_restore(flags); return ret; } EXPORT_SYMBOL(imx_dma_request); @@ -737,10 +733,7 @@ void imx_dma_free(int channel) local_irq_save(flags); /* Disable interrupts */ - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN, - DMA_BASE + DMA_CCR(channel)); + imx_dma_disable(channel); imxdma->name = NULL; #ifdef CONFIG_ARCH_MX2 diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index c6483ba..7506d96 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -64,6 +64,8 @@ static void gpio_unmask_irq(u32 irq) _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1); } +static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset); + static int gpio_set_irq_type(u32 irq, u32 type) { u32 gpio = irq_to_gpio(irq); @@ -72,6 +74,7 @@ static int gpio_set_irq_type(u32 irq, u32 type) int edge; void __iomem *reg = port->base; + port->both_edges &= ~(1 << (gpio & 31)); switch (type) { case IRQ_TYPE_EDGE_RISING: edge = GPIO_INT_RISE_EDGE; @@ -79,13 +82,24 @@ static int gpio_set_irq_type(u32 irq, u32 type) case IRQ_TYPE_EDGE_FALLING: edge = GPIO_INT_FALL_EDGE; break; + case IRQ_TYPE_EDGE_BOTH: + val = mxc_gpio_get(&port->chip, gpio & 31); + if (val) { + edge = GPIO_INT_LOW_LEV; + pr_debug("mxc: set GPIO %d to low trigger\n", gpio); + } else { + edge = GPIO_INT_HIGH_LEV; + pr_debug("mxc: set GPIO %d to high trigger\n", gpio); + } + port->both_edges |= 1 << (gpio & 31); + break; case IRQ_TYPE_LEVEL_LOW: edge = GPIO_INT_LOW_LEV; break; case IRQ_TYPE_LEVEL_HIGH: edge = GPIO_INT_HIGH_LEV; break; - default: /* this includes IRQ_TYPE_EDGE_BOTH */ + default: return -EINVAL; } @@ -98,6 +112,34 @@ static int gpio_set_irq_type(u32 irq, u32 type) return 0; } +static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) +{ + void __iomem *reg = port->base; + u32 bit, val; + int edge; + + reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ + bit = gpio & 0xf; + val = __raw_readl(reg); + edge = (val >> (bit << 1)) & 3; + val &= ~(0x3 << (bit << 1)); + switch (edge) { + case GPIO_INT_HIGH_LEV: + edge = GPIO_INT_LOW_LEV; + pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); + break; + case GPIO_INT_LOW_LEV: + edge = GPIO_INT_HIGH_LEV; + pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); + break; + default: + pr_err("mxc: invalid configuration for GPIO %d: %x\n", + gpio, edge); + return; + } + __raw_writel(val | (edge << (bit << 1)), reg); +} + /* handle n interrupts in one status register */ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) { @@ -105,11 +147,16 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) gpio_irq_no = port->virtual_irq_start; for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) { + u32 gpio = irq_to_gpio(gpio_irq_no); if ((irq_stat & 1) == 0) continue; BUG_ON(!(irq_desc[gpio_irq_no].handle_irq)); + + if (port->both_edges & (1 << (gpio & 31))) + mxc_flip_edge(port, gpio); + irq_desc[gpio_irq_no].handle_irq(gpio_irq_no, &irq_desc[gpio_irq_no]); } @@ -124,7 +171,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) irq_stat = __raw_readl(port->base + GPIO_ISR) & __raw_readl(port->base + GPIO_IMR); - BUG_ON(!irq_stat); + mxc_gpio_irq_handler(port, irq_stat); } #endif diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h new file mode 100644 index 0000000..8769e91 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h @@ -0,0 +1,22 @@ +/* + * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>. + * All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__ +#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__ + +#include <mach/hardware.h> + +/* mandatory for CONFIG_DEBUG_LL */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + +#endif diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h new file mode 100644 index 0000000..06701df --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h @@ -0,0 +1,58 @@ +/* + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__ +#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__ + +/* + * MXC UART EVB board level configurations + */ +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR) + +/* + * Memory-mapped I/O on MX21ADS base board + */ +#define MX21ADS_MMIO_BASE_ADDR 0xF5000000 +#define MX21ADS_MMIO_SIZE SZ_16M + +#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ + (MX21ADS_MMIO_BASE_ADDR + (offset)) + +#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11) +#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000) +#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) +#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) +#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) + +/* MX21ADS_IO_REG bit definitions */ +#define MX21ADS_IO_SD_WP 0x0001 /* read */ +#define MX21ADS_IO_TP6 0x0001 /* write */ +#define MX21ADS_IO_SW_SEL 0x0002 /* read */ +#define MX21ADS_IO_TP7 0x0002 /* write */ +#define MX21ADS_IO_RESET_E_UART 0x0004 +#define MX21ADS_IO_RESET_BASE 0x0008 +#define MX21ADS_IO_CSI_CTL2 0x0010 +#define MX21ADS_IO_CSI_CTL1 0x0020 +#define MX21ADS_IO_CSI_CTL0 0x0040 +#define MX21ADS_IO_UART1_EN 0x0080 +#define MX21ADS_IO_UART4_EN 0x0100 +#define MX21ADS_IO_LCDON 0x0200 +#define MX21ADS_IO_IRDA_EN 0x0400 +#define MX21ADS_IO_IRDA_FIR_SEL 0x0800 +#define MX21ADS_IO_IRDA_MD0_B 0x1000 +#define MX21ADS_IO_IRDA_MD1 0x2000 +#define MX21ADS_IO_LED4_ON 0x4000 +#define MX21ADS_IO_LED3_ON 0x8000 + +#endif /* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h index 1cac9d1..d42f4e6 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h @@ -47,7 +47,7 @@ /* * Base address of PBC controller, CS4 */ -#define PBC_BASE_ADDRESS 0xEB000000 +#define PBC_BASE_ADDRESS 0xf4300000 #define PBC_REG_ADDR(offset) (void __force __iomem *) \ (PBC_BASE_ADDRESS + (offset)) diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h new file mode 100644 index 0000000..a870f8e --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h @@ -0,0 +1,19 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__ +#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__ + +/* mandatory for CONFIG_DEBUG_LL */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + +#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h new file mode 100644 index 0000000..552b55d --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h @@ -0,0 +1,19 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__ +#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__ + +/* mandatory for CONFIG_DEBUG_LL */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + +#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h index 318c72a..06e6895 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h @@ -114,7 +114,7 @@ #define MXC_MAX_EXP_IO_LINES 16 -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h new file mode 100644 index 0000000..78cf31e --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> + * + * Based on code for mobots boards, + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ +#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ + +/* mandatory for CONFIG_LL_DEBUG */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) + +#ifndef __ASSEMBLY__ + +enum mx31lilly_boards { + MX31LILLY_NOBOARD = 0, + MX31LILLY_DB = 1, +}; + +/* + * This CPU module needs a baseboard to work. After basic initializing + * its own devices, it calls baseboard's init function. + */ + +extern void mx31lilly_db_init(void); + +#endif + +#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h index e4e5cf5..52fbdf2 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h @@ -11,28 +11,8 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__ #define __ASM_ARCH_MXC_BOARD_MX31LITE_H__ -#define MXC_MAX_EXP_IO_LINES 16 - - -/* - * Memory Size parameters - */ - -/* - * Size of SDRAM memory - */ -#define SDRAM_MEM_SIZE SZ_128M -/* - * Size of MBX buffer memory - */ -#define MXC_MBX_MEM_SIZE SZ_16M -/* - * Size of memory available to kernel - */ -#define MEM_SIZE (SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE) - #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ +#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h index f8aef1b..303fd24 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h @@ -19,7 +19,7 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ #define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h index 2b6b316..519bab3 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h @@ -11,9 +11,54 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__ #define __ASM_ARCH_MXC_BOARD_MX31PDK_H__ -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) +/* Definitions for components on the Debug board */ + +/* Base address of CPLD controller on the Debug board */ +#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(CS5_BASE_ADDR) + +/* LAN9217 ethernet base address */ +#define LAN9217_BASE_ADDR CS5_BASE_ADDR + +/* CPLD config and interrupt base address */ +#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000) + +/* LED switchs */ +#define CPLD_LED_REG (CPLD_ADDR + 0x00) +/* buttons */ +#define CPLD_SWITCH_BUTTONS_REG (EXPIO_ADDR + 0x08) +/* status, interrupt */ +#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10) +#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38) +#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20) +/* magic word for debug CPLD */ +#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40) +#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48) +/* CPLD code version */ +#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50) +/* magic word for debug CPLD */ +#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58) +/* module reset register */ +#define CPLD_MODULE_RESET_REG (CPLD_ADDR + 0x60) +/* CPU ID and Personality ID */ +#define CPLD_MCU_BOARD_ID_REG (CPLD_ADDR + 0x68) + +/* CPLD IRQ line for external uart, external ethernet etc */ +#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1) + +#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) +#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) + +#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0) +#define EXPIO_INT_XUART_A (MXC_EXP_IO_BASE + 1) +#define EXPIO_INT_XUART_B (MXC_EXP_IO_BASE + 2) +#define EXPIO_INT_BUTTON_A (MXC_EXP_IO_BASE + 3) +#define EXPIO_INT_BUTTON_B (MXC_EXP_IO_BASE + 4) + +#define MXC_MAX_EXP_IO_LINES 16 + #endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */ diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h index 9e197ae..1111037 100644 --- a/arch/arm/mach-imx/include/mach/io.h +++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h @@ -1,7 +1,5 @@ /* - * arch/arm/mach-imxads/include/mach/io.h - * - * Copyright (C) 1999 ARM Limited + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,12 +15,13 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffffffff +#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__ +#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__ + +/* mandatory for CONFIG_DEBUG_LL */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) -#endif +#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h index 82232ba..f0a1fa1 100644 --- a/arch/arm/plat-mxc/include/mach/board-pcm037.h +++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h @@ -19,7 +19,7 @@ #ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__ #define __ASM_ARCH_MXC_BOARD_PCM037_H__ -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h index 750c62a..4fcd749 100644 --- a/arch/arm/plat-mxc/include/mach/board-pcm038.h +++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h @@ -19,7 +19,7 @@ #ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__ #define __ASM_ARCH_MXC_BOARD_PCM038_H__ -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h index e22ba78..15fbdf1 100644 --- a/arch/arm/mach-imx/include/mach/timex.h +++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h @@ -1,7 +1,5 @@ /* - * linux/include/asm-arm/imx/timex.h - * - * Copyright (C) 1999 ARM Limited + * Copyright (C) 2008 Sascha Hauer, Pengutronix * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -18,9 +16,12 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H +#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__ +#define __ASM_ARCH_MXC_BOARD_PCM043_H__ + +/* mandatory for CONFIG_LL_DEBUG */ -#define CLOCK_TICK_RATE (16000000) +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) -#endif +#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h index 4ff762d..04033ec 100644 --- a/arch/arm/plat-mxc/include/mach/board-qong.h +++ b/arch/arm/plat-mxc/include/mach/board-qong.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_MXC_BOARD_QONG_H__ #define __ASM_ARCH_MXC_BOARD_QONG_H__ -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index b2f9b72..02c3cd0 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -14,7 +14,11 @@ struct platform_device; struct clk; -extern void mxc_map_io(void); +extern void mx1_map_io(void); +extern void mx21_map_io(void); +extern void mx27_map_io(void); +extern void mx31_map_io(void); +extern void mx35_map_io(void); extern void mxc_init_irq(void); extern void mxc_timer_init(struct clk *timer_clk); extern int mx1_clocks_init(unsigned long fref); diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 4f77314..bbc5f67 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -25,6 +25,9 @@ #ifdef CONFIG_MACH_MX27ADS #include <mach/board-mx27ads.h> #endif +#ifdef CONFIG_MACH_MX21ADS +#include <mach/board-mx21ads.h> +#endif #ifdef CONFIG_MACH_PCM038 #include <mach/board-pcm038.h> #endif @@ -34,6 +37,21 @@ #ifdef CONFIG_MACH_QONG #include <mach/board-qong.h> #endif +#ifdef CONFIG_MACH_PCM043 +#include <mach/board-pcm043.h> +#endif +#ifdef CONFIG_MACH_MX27_3DS +#include <mach/board-mx27pdk.h> +#endif +#ifdef CONFIG_MACH_ARMADILLO5X0 +#include <mach/board-armadillo5x0.h> +#endif +#ifdef CONFIG_MACH_MX35_3DS +#include <mach/board-mx35pdk.h> +#endif +#ifdef CONFIG_MACH_MX27LITE +#include <mach/board-mx27lite.h> +#endif .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index ea509f1..894d2f8 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -35,6 +35,7 @@ struct mxc_gpio_port { int irq; int virtual_irq_start; struct gpio_chip chip; + u32 both_edges; }; int mxc_gpio_init(struct mxc_gpio_port*, int); diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h index 599217b..90af4d9 100644 --- a/arch/arm/plat-mxc/include/mach/imx-uart.h +++ b/arch/arm/plat-mxc/include/mach/imx-uart.h @@ -23,7 +23,7 @@ struct imxuart_platform_data { int (*init)(struct platform_device *pdev); - int (*exit)(struct platform_device *pdev); + void (*exit)(struct platform_device *pdev); unsigned int flags; }; diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h index 762a7b0..9f01011 100644 --- a/arch/arm/plat-mxc/include/mach/imxfb.h +++ b/arch/arm/plat-mxc/include/mach/imxfb.h @@ -76,8 +76,8 @@ struct imx_fb_platform_data { u_char * fixed_screen_cpu; dma_addr_t fixed_screen_dma; - int (*init)(struct platform_device*); - int (*exit)(struct platform_device*); + int (*init)(struct platform_device *); + void (*exit)(struct platform_device *); void (*lcd_power)(int); void (*backlight_power)(int); diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index 57e927a..27f8d1b 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -114,7 +114,7 @@ enum iomux_gp_func { * - setups the iomux according to the configuration * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib */ -int mxc_iomux_setup_pin(const unsigned int pin, const char *label); +int mxc_iomux_alloc_pin(const unsigned int pin, const char *label); /* * setups mutliple pins * convenient way to call the above function with tables @@ -633,6 +633,40 @@ enum iomux_pins { #define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO) +#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO) +#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 * cspi1_ss1*/ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h new file mode 100644 index 0000000..00b0ac1 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h @@ -0,0 +1,1267 @@ +/* + * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option, NO_PAD_CTRL) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IOMUX_MX35_H__ +#define __MACH_IOMUX_MX35_H__ + +#include <mach/iomux-v3.h> + +/* + * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named + * GPIO_<unit>_<num> see also iomux-v3.h + */ + +/* PAD MUX ALT INPSE PATH */ +#define MX35_PAD_CAPTURE__GPT_CAPIN1 IOMUX_PAD(0x328, 0x004, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__GPT_CMPOUT2 IOMUX_PAD(0x328, 0x004, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__CSPI2_SS1 IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__EPIT1_EPITO IOMUX_PAD(0x328, 0x004, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__CCM_CLK32K IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__GPIO1_4 IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL) + +#define MX35_PAD_COMPARE__GPT_CMPOUT1 IOMUX_PAD(0x32c, 0x008, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__GPT_CAPIN2 IOMUX_PAD(0x32c, 0x008, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__GPT_CMPOUT3 IOMUX_PAD(0x32c, 0x008, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__EPIT2_EPITO IOMUX_PAD(0x32c, 0x008, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__GPIO1_5 IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__SDMA_EXTDMA_2 IOMUX_PAD(0x32c, 0x008, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_WDOG_RST__WDOG_WDOG_B IOMUX_PAD(0x330, 0x00c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE IOMUX_PAD(0x330, 0x00c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_WDOG_RST__GPIO1_6 IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_0__OWIRE_LINE IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 IOMUX_PAD(0x334, 0x010, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__PWM_PWMO IOMUX_PAD(0x338, 0x014, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__CSPI1_SS2 IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT IOMUX_PAD(0x338, 0x014, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 IOMUX_PAD(0x338, 0x014, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO2_0__GPIO2_0 IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK IOMUX_PAD(0x33c, 0x018, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO3_0__GPIO3_0 IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK IOMUX_PAD(0x340, 0x01c, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B IOMUX_PAD(0x344, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_POR_B__CCM_POR_B IOMUX_PAD(0x348, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CLKO__CCM_CLKO IOMUX_PAD(0x34c, 0x020, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CLKO__GPIO1_8 IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL) + +#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 IOMUX_PAD(0x350, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 IOMUX_PAD(0x354, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 IOMUX_PAD(0x358, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 IOMUX_PAD(0x35c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 IOMUX_PAD(0x360, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_VSTBY__CCM_VSTBY IOMUX_PAD(0x364, 0x024, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_VSTBY__GPIO1_7 IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL) + +#define MX35_PAD_A0__EMI_EIM_DA_L_0 IOMUX_PAD(0x368, 0x028, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A1__EMI_EIM_DA_L_1 IOMUX_PAD(0x36c, 0x02c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A2__EMI_EIM_DA_L_2 IOMUX_PAD(0x370, 0x030, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A3__EMI_EIM_DA_L_3 IOMUX_PAD(0x374, 0x034, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A4__EMI_EIM_DA_L_4 IOMUX_PAD(0x378, 0x038, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A5__EMI_EIM_DA_L_5 IOMUX_PAD(0x37c, 0x03c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A6__EMI_EIM_DA_L_6 IOMUX_PAD(0x380, 0x040, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A7__EMI_EIM_DA_L_7 IOMUX_PAD(0x384, 0x044, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A8__EMI_EIM_DA_H_8 IOMUX_PAD(0x388, 0x048, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A9__EMI_EIM_DA_H_9 IOMUX_PAD(0x38c, 0x04c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A10__EMI_EIM_DA_H_10 IOMUX_PAD(0x390, 0x050, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_MA10__EMI_MA10 IOMUX_PAD(0x394, 0x054, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A11__EMI_EIM_DA_H_11 IOMUX_PAD(0x398, 0x058, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A12__EMI_EIM_DA_H_12 IOMUX_PAD(0x39c, 0x05c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A13__EMI_EIM_DA_H_13 IOMUX_PAD(0x3a0, 0x060, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A14__EMI_EIM_DA_H2_14 IOMUX_PAD(0x3a4, 0x064, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A15__EMI_EIM_DA_H2_15 IOMUX_PAD(0x3a8, 0x068, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A16__EMI_EIM_A_16 IOMUX_PAD(0x3ac, 0x06c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A17__EMI_EIM_A_17 IOMUX_PAD(0x3b0, 0x070, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A18__EMI_EIM_A_18 IOMUX_PAD(0x3b4, 0x074, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A19__EMI_EIM_A_19 IOMUX_PAD(0x3b8, 0x078, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A20__EMI_EIM_A_20 IOMUX_PAD(0x3bc, 0x07c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A21__EMI_EIM_A_21 IOMUX_PAD(0x3c0, 0x080, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A22__EMI_EIM_A_22 IOMUX_PAD(0x3c4, 0x084, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A23__EMI_EIM_A_23 IOMUX_PAD(0x3c8, 0x088, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A24__EMI_EIM_A_24 IOMUX_PAD(0x3cc, 0x08c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A25__EMI_EIM_A_25 IOMUX_PAD(0x3d0, 0x090, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDBA1__EMI_EIM_SDBA1 IOMUX_PAD(0x3d4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDBA0__EMI_EIM_SDBA0 IOMUX_PAD(0x3d8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD0__EMI_DRAM_D_0 IOMUX_PAD(0x3dc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1__EMI_DRAM_D_1 IOMUX_PAD(0x3e0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD2__EMI_DRAM_D_2 IOMUX_PAD(0x3e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD3__EMI_DRAM_D_3 IOMUX_PAD(0x3e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD4__EMI_DRAM_D_4 IOMUX_PAD(0x3ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD5__EMI_DRAM_D_5 IOMUX_PAD(0x3f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD6__EMI_DRAM_D_6 IOMUX_PAD(0x3f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD7__EMI_DRAM_D_7 IOMUX_PAD(0x3f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD8__EMI_DRAM_D_8 IOMUX_PAD(0x3fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD9__EMI_DRAM_D_9 IOMUX_PAD(0x400, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD10__EMI_DRAM_D_10 IOMUX_PAD(0x404, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD11__EMI_DRAM_D_11 IOMUX_PAD(0x408, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD12__EMI_DRAM_D_12 IOMUX_PAD(0x40c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD13__EMI_DRAM_D_13 IOMUX_PAD(0x410, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD14__EMI_DRAM_D_14 IOMUX_PAD(0x414, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD15__EMI_DRAM_D_15 IOMUX_PAD(0x418, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD16__EMI_DRAM_D_16 IOMUX_PAD(0x41c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD17__EMI_DRAM_D_17 IOMUX_PAD(0x420, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD18__EMI_DRAM_D_18 IOMUX_PAD(0x424, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD19__EMI_DRAM_D_19 IOMUX_PAD(0x428, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD20__EMI_DRAM_D_20 IOMUX_PAD(0x42c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD21__EMI_DRAM_D_21 IOMUX_PAD(0x430, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD22__EMI_DRAM_D_22 IOMUX_PAD(0x434, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD23__EMI_DRAM_D_23 IOMUX_PAD(0x438, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD24__EMI_DRAM_D_24 IOMUX_PAD(0x43c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD25__EMI_DRAM_D_25 IOMUX_PAD(0x440, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD26__EMI_DRAM_D_26 IOMUX_PAD(0x444, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD27__EMI_DRAM_D_27 IOMUX_PAD(0x448, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD28__EMI_DRAM_D_28 IOMUX_PAD(0x44c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD29__EMI_DRAM_D_29 IOMUX_PAD(0x450, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD30__EMI_DRAM_D_30 IOMUX_PAD(0x454, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD31__EMI_DRAM_D_31 IOMUX_PAD(0x458, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM0__EMI_DRAM_DQM_0 IOMUX_PAD(0x45c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM1__EMI_DRAM_DQM_1 IOMUX_PAD(0x460, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM2__EMI_DRAM_DQM_2 IOMUX_PAD(0x464, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM3__EMI_DRAM_DQM_3 IOMUX_PAD(0x468, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_EB0__EMI_EIM_EB0_B IOMUX_PAD(0x46c, 0x094, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_EB1__EMI_EIM_EB1_B IOMUX_PAD(0x470, 0x098, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_OE__EMI_EIM_OE IOMUX_PAD(0x474, 0x09c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS0__EMI_EIM_CS0 IOMUX_PAD(0x478, 0x0a0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS1__EMI_EIM_CS1 IOMUX_PAD(0x47c, 0x0a4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS1__EMI_NANDF_CE3 IOMUX_PAD(0x47c, 0x0a4, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS2__EMI_EIM_CS2 IOMUX_PAD(0x480, 0x0a8, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS3__EMI_EIM_CS3 IOMUX_PAD(0x484, 0x0ac, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS4__EMI_EIM_CS4 IOMUX_PAD(0x488, 0x0b0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS4__EMI_DTACK_B IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL) +#define MX35_PAD_CS4__EMI_NANDF_CE1 IOMUX_PAD(0x488, 0x0b0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS4__GPIO1_20 IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS5__EMI_EIM_CS5 IOMUX_PAD(0x48c, 0x0b4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS5__CSPI2_SS2 IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL) +#define MX35_PAD_CS5__CSPI1_SS2 IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL) +#define MX35_PAD_CS5__EMI_NANDF_CE2 IOMUX_PAD(0x48c, 0x0b4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS5__GPIO1_21 IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL) + +#define MX35_PAD_NF_CE0__EMI_NANDF_CE0 IOMUX_PAD(0x490, 0x0b8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NF_CE0__GPIO1_22 IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL) + +#define MX35_PAD_ECB__EMI_EIM_ECB IOMUX_PAD(0x494, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LBA__EMI_EIM_LBA IOMUX_PAD(0x498, 0x0bc, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_BCLK__EMI_EIM_BCLK IOMUX_PAD(0x49c, 0x0c0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RW__EMI_EIM_RW IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RAS__EMI_DRAM_RAS IOMUX_PAD(0x4a4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CAS__EMI_DRAM_CAS IOMUX_PAD(0x4a8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDWE__EMI_DRAM_SDWE IOMUX_PAD(0x4ac, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 IOMUX_PAD(0x4b0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 IOMUX_PAD(0x4b4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK IOMUX_PAD(0x4b8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 IOMUX_PAD(0x4bc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 IOMUX_PAD(0x4c0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 IOMUX_PAD(0x4c4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 IOMUX_PAD(0x4c8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__GPIO2_18 IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__GPIO2_19 IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFALE__EMI_NANDF_ALE IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__USB_TOP_USBH2_STP IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__IPU_DISPB_CS0 IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__GPIO2_20 IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFCLE__EMI_NANDF_CLE IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__GPIO2_21 IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__IPU_DISPB_WR IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__GPIO2_22 IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFRB__EMI_NANDF_RB IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRB__IPU_DISPB_RD IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRB__GPIO2_23 IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D15__EMI_EIM_D_15 IOMUX_PAD(0x4e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D14__EMI_EIM_D_14 IOMUX_PAD(0x4e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D13__EMI_EIM_D_13 IOMUX_PAD(0x4ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D12__EMI_EIM_D_12 IOMUX_PAD(0x4f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D11__EMI_EIM_D_11 IOMUX_PAD(0x4f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D10__EMI_EIM_D_10 IOMUX_PAD(0x4f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D9__EMI_EIM_D_9 IOMUX_PAD(0x4fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D8__EMI_EIM_D_8 IOMUX_PAD(0x500, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D7__EMI_EIM_D_7 IOMUX_PAD(0x504, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D6__EMI_EIM_D_6 IOMUX_PAD(0x508, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D5__EMI_EIM_D_5 IOMUX_PAD(0x50c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D4__EMI_EIM_D_4 IOMUX_PAD(0x510, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3__EMI_EIM_D_3 IOMUX_PAD(0x514, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D2__EMI_EIM_D_2 IOMUX_PAD(0x518, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D1__EMI_EIM_D_1 IOMUX_PAD(0x51c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D0__EMI_EIM_D_0 IOMUX_PAD(0x520, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D8__IPU_CSI_D_8 IOMUX_PAD(0x524, 0x0e0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D8__KPP_COL_0 IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D8__GPIO1_20 IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL) +#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 IOMUX_PAD(0x524, 0x0e0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D9__IPU_CSI_D_9 IOMUX_PAD(0x528, 0x0e4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D9__KPP_COL_1 IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D9__GPIO1_21 IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL) +#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 IOMUX_PAD(0x528, 0x0e4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D10__IPU_CSI_D_10 IOMUX_PAD(0x52c, 0x0e8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D10__KPP_COL_2 IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D10__GPIO1_22 IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL) +#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 IOMUX_PAD(0x52c, 0x0e8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D11__IPU_CSI_D_11 IOMUX_PAD(0x530, 0x0ec, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D11__KPP_COL_3 IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D11__GPIO1_23 IOMUX_PAD(0x530, 0x0ec, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D12__IPU_CSI_D_12 IOMUX_PAD(0x534, 0x0f0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D12__KPP_ROW_0 IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D12__GPIO1_24 IOMUX_PAD(0x534, 0x0f0, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D13__IPU_CSI_D_13 IOMUX_PAD(0x538, 0x0f4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D13__KPP_ROW_1 IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D13__GPIO1_25 IOMUX_PAD(0x538, 0x0f4, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D14__IPU_CSI_D_14 IOMUX_PAD(0x53c, 0x0f8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D14__KPP_ROW_2 IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D14__GPIO1_26 IOMUX_PAD(0x53c, 0x0f8, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D15__IPU_CSI_D_15 IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D15__KPP_ROW_3 IOMUX_PAD(0x540, 0x0fc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D15__GPIO1_27 IOMUX_PAD(0x540, 0x0fc, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK IOMUX_PAD(0x544, 0x100, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_MCLK__GPIO1_28 IOMUX_PAD(0x544, 0x100, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC IOMUX_PAD(0x548, 0x104, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_VSYNC__GPIO1_29 IOMUX_PAD(0x548, 0x104, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC IOMUX_PAD(0x54c, 0x108, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_HSYNC__GPIO1_30 IOMUX_PAD(0x54c, 0x108, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK IOMUX_PAD(0x550, 0x10c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_PIXCLK__GPIO1_31 IOMUX_PAD(0x550, 0x10c, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C1_CLK__I2C1_SCL IOMUX_PAD(0x554, 0x110, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C1_CLK__GPIO2_24 IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK IOMUX_PAD(0x554, 0x110, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C1_DAT__I2C1_SDA IOMUX_PAD(0x558, 0x114, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C1_DAT__GPIO2_25 IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C2_CLK__I2C2_SCL IOMUX_PAD(0x55c, 0x118, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__CAN1_TXCAN IOMUX_PAD(0x55c, 0x118, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR IOMUX_PAD(0x55c, 0x118, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__GPIO2_26 IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x55c, 0x118, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C2_DAT__I2C2_SDA IOMUX_PAD(0x560, 0x11c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__CAN1_RXCAN IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__GPIO2_27 IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x560, 0x11c, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD IOMUX_PAD(0x564, 0x120, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD4__GPIO2_28 IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 IOMUX_PAD(0x564, 0x120, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD IOMUX_PAD(0x568, 0x124, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD4__GPIO2_29 IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 IOMUX_PAD(0x568, 0x124, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC IOMUX_PAD(0x56c, 0x128, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK4__GPIO2_30 IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 IOMUX_PAD(0x56c, 0x128, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS IOMUX_PAD(0x570, 0x12c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS4__GPIO2_31 IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 IOMUX_PAD(0x570, 0x12c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD IOMUX_PAD(0x574, 0x130, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x574, 0x130, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD5__CSPI2_MOSI IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD5__GPIO1_0 IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL) +#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 IOMUX_PAD(0x574, 0x130, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD IOMUX_PAD(0x578, 0x134, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__CSPI2_MISO IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__GPIO1_1 IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 IOMUX_PAD(0x578, 0x134, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC IOMUX_PAD(0x57c, 0x138, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__CSPI2_SCLK IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__GPIO1_2 IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 IOMUX_PAD(0x57c, 0x138, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS IOMUX_PAD(0x580, 0x13c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS5__CSPI2_RDY IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS5__GPIO1_3 IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 IOMUX_PAD(0x580, 0x13c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCKR__ESAI_SCKR IOMUX_PAD(0x584, 0x140, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCKR__GPIO1_4 IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL) +#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 IOMUX_PAD(0x584, 0x140, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FSR__ESAI_FSR IOMUX_PAD(0x588, 0x144, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FSR__GPIO1_5 IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL) +#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 IOMUX_PAD(0x588, 0x144, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_HCKR__ESAI_HCKR IOMUX_PAD(0x58c, 0x148, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS IOMUX_PAD(0x58c, 0x148, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__CSPI2_SS0 IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__IPU_FLASH_STROBE IOMUX_PAD(0x58c, 0x148, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__GPIO1_6 IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL) +#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 IOMUX_PAD(0x58c, 0x148, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCKT__ESAI_SCKT IOMUX_PAD(0x590, 0x14c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCKT__GPIO1_7 IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL) +#define MX35_PAD_SCKT__IPU_CSI_D_0 IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL) +#define MX35_PAD_SCKT__KPP_ROW_2 IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL) + +#define MX35_PAD_FST__ESAI_FST IOMUX_PAD(0x594, 0x150, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FST__GPIO1_8 IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL) +#define MX35_PAD_FST__IPU_CSI_D_1 IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL) +#define MX35_PAD_FST__KPP_ROW_3 IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL) + +#define MX35_PAD_HCKT__ESAI_HCKT IOMUX_PAD(0x598, 0x154, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__GPIO1_9 IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__IPU_CSI_D_2 IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__KPP_COL_3 IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0 IOMUX_PAD(0x59c, 0x158, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC IOMUX_PAD(0x59c, 0x158, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__CSPI2_SS2 IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__CAN2_TXCAN IOMUX_PAD(0x59c, 0x158, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__UART2_DTR IOMUX_PAD(0x59c, 0x158, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__GPIO1_10 IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 IOMUX_PAD(0x59c, 0x158, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1 IOMUX_PAD(0x5a0, 0x15c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS IOMUX_PAD(0x5a0, 0x15c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__CSPI2_SS3 IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__CAN2_RXCAN IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__UART2_DSR IOMUX_PAD(0x5a0, 0x15c, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__GPIO1_11 IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__IPU_CSI_D_3 IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__KPP_ROW_0 IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2 IOMUX_PAD(0x5a4, 0x160, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__I2C3_SCL IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1 IOMUX_PAD(0x5a4, 0x160, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__GPIO1_12 IOMUX_PAD(0x5a4, 0x160, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__IPU_CSI_D_4 IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__KPP_ROW_1 IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3 IOMUX_PAD(0x5a8, 0x164, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__I2C3_SDA IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2 IOMUX_PAD(0x5a8, 0x164, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__GPIO1_13 IOMUX_PAD(0x5a8, 0x164, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__IPU_CSI_D_5 IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__KPP_COL_0 IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX1__ESAI_TX1 IOMUX_PAD(0x5ac, 0x168, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__CCM_PMIC_RDY IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL) +#define MX35_PAD_TX1__CSPI1_SS2 IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL) +#define MX35_PAD_TX1__EMI_NANDF_CE3 IOMUX_PAD(0x5ac, 0x168, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__UART2_RI IOMUX_PAD(0x5ac, 0x168, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__GPIO1_14 IOMUX_PAD(0x5ac, 0x168, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__IPU_CSI_D_6 IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__KPP_COL_1 IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX0__ESAI_TX0 IOMUX_PAD(0x5b0, 0x16c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL) +#define MX35_PAD_TX0__CSPI1_SS3 IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__EMI_DTACK_B IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL) +#define MX35_PAD_TX0__UART2_DCD IOMUX_PAD(0x5b0, 0x16c, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__GPIO1_15 IOMUX_PAD(0x5b0, 0x16c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__IPU_CSI_D_7 IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__KPP_COL_2 IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x5b4, 0x170, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MOSI__GPIO1_16 IOMUX_PAD(0x5b4, 0x170, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 IOMUX_PAD(0x5b4, 0x170, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x5b8, 0x174, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MISO__GPIO1_17 IOMUX_PAD(0x5b8, 0x174, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 IOMUX_PAD(0x5b8, 0x174, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x5bc, 0x178, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__OWIRE_LINE IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__CSPI2_SS3 IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__GPIO1_18 IOMUX_PAD(0x5bc, 0x178, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 IOMUX_PAD(0x5bc, 0x178, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x5c0, 0x17c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__PWM_PWMO IOMUX_PAD(0x5c0, 0x17c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__CCM_CLK32K IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__GPIO1_19 IOMUX_PAD(0x5c0, 0x17c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 IOMUX_PAD(0x5c0, 0x17c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 IOMUX_PAD(0x5c0, 0x17c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x5c4, 0x180, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SCLK__GPIO3_4 IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 IOMUX_PAD(0x5c4, 0x180, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 IOMUX_PAD(0x5c4, 0x180, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY IOMUX_PAD(0x5c8, 0x184, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 IOMUX_PAD(0x5c8, 0x184, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 IOMUX_PAD(0x5c8, 0x184, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RXD1__UART1_RXD_MUX IOMUX_PAD(0x5cc, 0x188, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD1__CSPI2_MOSI IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL) +#define MX35_PAD_RXD1__KPP_COL_4 IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD1__GPIO3_6 IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 IOMUX_PAD(0x5cc, 0x188, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TXD1__UART1_TXD_MUX IOMUX_PAD(0x5d0, 0x18c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD1__CSPI2_MISO IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL) +#define MX35_PAD_TXD1__KPP_COL_5 IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD1__GPIO3_7 IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 IOMUX_PAD(0x5d0, 0x18c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RTS1__UART1_RTS IOMUX_PAD(0x5d4, 0x190, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__CSPI2_SCLK IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS1__I2C3_SCL IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS1__IPU_CSI_D_0 IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS1__KPP_COL_6 IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__GPIO3_8 IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__EMI_NANDF_CE1 IOMUX_PAD(0x5d4, 0x190, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 IOMUX_PAD(0x5d4, 0x190, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CTS1__UART1_CTS IOMUX_PAD(0x5d8, 0x194, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__CSPI2_RDY IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS1__I2C3_SDA IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS1__IPU_CSI_D_1 IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS1__KPP_COL_7 IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__GPIO3_9 IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__EMI_NANDF_CE2 IOMUX_PAD(0x5d8, 0x194, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 IOMUX_PAD(0x5d8, 0x194, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RXD2__UART2_RXD_MUX IOMUX_PAD(0x5dc, 0x198, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD2__KPP_ROW_4 IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD2__GPIO3_10 IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL) + +#define MX35_PAD_TXD2__UART2_TXD_MUX IOMUX_PAD(0x5e0, 0x19c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL) +#define MX35_PAD_TXD2__KPP_ROW_5 IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD2__GPIO3_11 IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RTS2__UART2_RTS IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1 IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS2__CAN2_RXCAN IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS2__IPU_CSI_D_2 IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS2__KPP_ROW_6 IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__GPIO3_12 IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__UART3_RXD_MUX IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CTS2__UART2_CTS IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__CAN2_TXCAN IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__IPU_CSI_D_3 IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS2__KPP_ROW_7 IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__GPIO3_13 IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__UART3_TXD_MUX IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RTCK__ARM11P_TOP_RTCK IOMUX_PAD(0x5ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TCK__SJC_TCK IOMUX_PAD(0x5f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TMS__SJC_TMS IOMUX_PAD(0x5f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TDI__SJC_TDI IOMUX_PAD(0x5f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TDO__SJC_TDO IOMUX_PAD(0x5fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TRSTB__SJC_TRSTB IOMUX_PAD(0x600, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DE_B__SJC_DE_B IOMUX_PAD(0x604, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SJC_MOD__SJC_MOD IOMUX_PAD(0x608, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR IOMUX_PAD(0x60c, 0x1a8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR IOMUX_PAD(0x60c, 0x1a8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_PWR__GPIO3_14 IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL) + +#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC IOMUX_PAD(0x610, 0x1ac, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_OC__GPIO3_15 IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD0__IPU_DISPB_DAT_0 IOMUX_PAD(0x614, 0x1b0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD0__GPIO2_0 IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL) +#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 IOMUX_PAD(0x614, 0x1b0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD1__IPU_DISPB_DAT_1 IOMUX_PAD(0x618, 0x1b4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD1__GPIO2_1 IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL) +#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 IOMUX_PAD(0x618, 0x1b4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD2__IPU_DISPB_DAT_2 IOMUX_PAD(0x61c, 0x1b8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD2__GPIO2_2 IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 IOMUX_PAD(0x61c, 0x1b8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD3__IPU_DISPB_DAT_3 IOMUX_PAD(0x620, 0x1bc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD3__GPIO2_3 IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL) +#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 IOMUX_PAD(0x620, 0x1bc, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD4__IPU_DISPB_DAT_4 IOMUX_PAD(0x624, 0x1c0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD4__GPIO2_4 IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 IOMUX_PAD(0x624, 0x1c0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD5__IPU_DISPB_DAT_5 IOMUX_PAD(0x628, 0x1c4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD5__GPIO2_5 IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL) +#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 IOMUX_PAD(0x628, 0x1c4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD6__IPU_DISPB_DAT_6 IOMUX_PAD(0x62c, 0x1c8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD6__GPIO2_6 IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL) +#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 IOMUX_PAD(0x62c, 0x1c8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD7__IPU_DISPB_DAT_7 IOMUX_PAD(0x630, 0x1cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD7__GPIO2_7 IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL) +#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 IOMUX_PAD(0x630, 0x1cc, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD8__IPU_DISPB_DAT_8 IOMUX_PAD(0x634, 0x1d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD8__GPIO2_8 IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4 0, NO_PAD_CTRL) +#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD10__GPIO2_10 IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 IOMUX_PAD(0x63c, 0x1d8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD11__IPU_DISPB_DAT_11 IOMUX_PAD(0x640, 0x1dc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD11__GPIO2_11 IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL) +#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 IOMUX_PAD(0x640, 0x1dc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4 IOMUX_PAD(0x640, 0x1dc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD12__IPU_DISPB_DAT_12 IOMUX_PAD(0x644, 0x1e0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD12__GPIO2_12 IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL) +#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 IOMUX_PAD(0x644, 0x1e0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5 IOMUX_PAD(0x644, 0x1e0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD13__IPU_DISPB_DAT_13 IOMUX_PAD(0x648, 0x1e4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD13__GPIO2_13 IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL) +#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 IOMUX_PAD(0x648, 0x1e4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6 IOMUX_PAD(0x648, 0x1e4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD14__IPU_DISPB_DAT_14 IOMUX_PAD(0x64c, 0x1e8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD14__GPIO2_14 IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x64c, 0x1e8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7 IOMUX_PAD(0x64c, 0x1e8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD15__IPU_DISPB_DAT_15 IOMUX_PAD(0x650, 0x1ec, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD15__GPIO2_15 IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL) +#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x650, 0x1ec, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8 IOMUX_PAD(0x650, 0x1ec, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD16__IPU_DISPB_DAT_16 IOMUX_PAD(0x654, 0x1f0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__GPIO2_16 IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x654, 0x1f0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9 IOMUX_PAD(0x654, 0x1f0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD17__IPU_DISPB_DAT_17 IOMUX_PAD(0x658, 0x1f4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__IPU_DISPB_CS2 IOMUX_PAD(0x658, 0x1f4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__GPIO2_17 IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x658, 0x1f4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10 IOMUX_PAD(0x658, 0x1f4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD18__IPU_DISPB_DAT_18 IOMUX_PAD(0x65c, 0x1f8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL) +#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL) +#define MX35_PAD_LD18__ESDHC3_CMD IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__GPIO3_24 IOMUX_PAD(0x65c, 0x1f8, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x65c, 0x1f8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11 IOMUX_PAD(0x65c, 0x1f8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD19__IPU_DISPB_DAT_19 IOMUX_PAD(0x660, 0x1fc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__IPU_DISPB_BCLK IOMUX_PAD(0x660, 0x1fc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__IPU_DISPB_CS1 IOMUX_PAD(0x660, 0x1fc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__ESDHC3_CLK IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__GPIO3_25 IOMUX_PAD(0x660, 0x1fc, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x660, 0x1fc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12 IOMUX_PAD(0x660, 0x1fc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD20__IPU_DISPB_DAT_20 IOMUX_PAD(0x664, 0x200, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__IPU_DISPB_CS0 IOMUX_PAD(0x664, 0x200, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__IPU_DISPB_SD_CLK IOMUX_PAD(0x664, 0x200, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__ESDHC3_DAT0 IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__GPIO3_26 IOMUX_PAD(0x664, 0x200, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 IOMUX_PAD(0x664, 0x200, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13 IOMUX_PAD(0x664, 0x200, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD21__IPU_DISPB_DAT_21 IOMUX_PAD(0x668, 0x204, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__IPU_DISPB_PAR_RS IOMUX_PAD(0x668, 0x204, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__IPU_DISPB_SER_RS IOMUX_PAD(0x668, 0x204, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__ESDHC3_DAT1 IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__USB_TOP_USBOTG_STP IOMUX_PAD(0x668, 0x204, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__GPIO3_27 IOMUX_PAD(0x668, 0x204, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x668, 0x204, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14 IOMUX_PAD(0x668, 0x204, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD22__IPU_DISPB_DAT_22 IOMUX_PAD(0x66c, 0x208, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__IPU_DISPB_WR IOMUX_PAD(0x66c, 0x208, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__IPU_DISPB_SD_D_I IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__ESDHC3_DAT2 IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__GPIO3_28 IOMUX_PAD(0x66c, 0x208, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x66c, 0x208, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__ARM11P_TOP_TRCTL IOMUX_PAD(0x66c, 0x208, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD23__IPU_DISPB_DAT_23 IOMUX_PAD(0x670, 0x20c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__IPU_DISPB_RD IOMUX_PAD(0x670, 0x20c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL) +#define MX35_PAD_LD23__ESDHC3_DAT3 IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__GPIO3_29 IOMUX_PAD(0x670, 0x20c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x670, 0x20c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__ARM11P_TOP_TRCLK IOMUX_PAD(0x670, 0x20c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC IOMUX_PAD(0x674, 0x210, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__GPIO3_30 IOMUX_PAD(0x674, 0x210, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x674, 0x210, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 IOMUX_PAD(0x674, 0x210, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK IOMUX_PAD(0x678, 0x214, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK IOMUX_PAD(0x678, 0x214, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__GPIO3_31 IOMUX_PAD(0x678, 0x214, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 IOMUX_PAD(0x678, 0x214, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 IOMUX_PAD(0x678, 0x214, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY IOMUX_PAD(0x67c, 0x218, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O IOMUX_PAD(0x67c, 0x218, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__GPIO1_0 IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 IOMUX_PAD(0x67c, 0x218, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 IOMUX_PAD(0x67c, 0x218, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR IOMUX_PAD(0x680, 0x21c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CONTRAST__GPIO1_1 IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL) +#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 IOMUX_PAD(0x680, 0x21c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 IOMUX_PAD(0x680, 0x21c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC IOMUX_PAD(0x684, 0x220, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 IOMUX_PAD(0x684, 0x220, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__GPIO1_2 IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD IOMUX_PAD(0x684, 0x220, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 IOMUX_PAD(0x684, 0x220, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV IOMUX_PAD(0x688, 0x224, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS IOMUX_PAD(0x688, 0x224, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__GPIO1_3 IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x688, 0x224, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 IOMUX_PAD(0x688, 0x224, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS IOMUX_PAD(0x68c, 0x228, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__IPU_DISPB_CS2 IOMUX_PAD(0x68c, 0x228, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__GPIO1_4 IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x68c, 0x228, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 IOMUX_PAD(0x68c, 0x228, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL IOMUX_PAD(0x690, 0x22c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__GPIO1_5 IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x690, 0x22c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 IOMUX_PAD(0x690, 0x22c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x694, 0x230, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__MSHC_SCLK IOMUX_PAD(0x694, 0x230, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__GPIO1_6 IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL IOMUX_PAD(0x694, 0x230, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x698, 0x234, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__MSHC_BS IOMUX_PAD(0x698, 0x234, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK IOMUX_PAD(0x698, 0x234, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__GPIO1_7 IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK IOMUX_PAD(0x698, 0x234, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x69c, 0x238, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__MSHC_DATA_0 IOMUX_PAD(0x69c, 0x238, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 IOMUX_PAD(0x69c, 0x238, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__GPIO1_8 IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 IOMUX_PAD(0x69c, 0x238, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x6a0, 0x23c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__MSHC_DATA_1 IOMUX_PAD(0x6a0, 0x23c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS IOMUX_PAD(0x6a0, 0x23c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__GPIO1_9 IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 IOMUX_PAD(0x6a0, 0x23c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x6a4, 0x240, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__MSHC_DATA_2 IOMUX_PAD(0x6a4, 0x240, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR IOMUX_PAD(0x6a4, 0x240, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__GPIO1_10 IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 IOMUX_PAD(0x6a4, 0x240, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x6a8, 0x244, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__MSHC_DATA_3 IOMUX_PAD(0x6a8, 0x244, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD IOMUX_PAD(0x6a8, 0x244, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__GPIO1_11 IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 IOMUX_PAD(0x6a8, 0x244, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x6ac, 0x248, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__I2C3_SCL IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__ESDHC1_DAT4 IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__IPU_CSI_D_2 IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__GPIO2_0 IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x6ac, 0x248, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL) + +#define MX35_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x6b0, 0x24c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__I2C3_SDA IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__ESDHC1_DAT5 IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__IPU_CSI_D_3 IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__GPIO2_1 IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2 IOMUX_PAD(0x6b0, 0x24c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x6b4, 0x250, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6 IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4 IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__GPIO2_2 IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x6b8, 0x254, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX IOMUX_PAD(0x6b8, 0x254, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7 IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5 IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__GPIO2_3 IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x6bc, 0x258, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__UART3_RTS IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__CAN1_RXCAN IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6 IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__GPIO2_4 IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x6c0, 0x25c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__UART3_CTS IOMUX_PAD(0x6c0, 0x25c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__CAN1_TXCAN IOMUX_PAD(0x6c0, 0x25c, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7 IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__GPIO2_5 IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL) + +#define MX35_PAD_ATA_CS0__ATA_CS0 IOMUX_PAD(0x6c4, 0x260, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__CSPI1_SS3 IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1 IOMUX_PAD(0x6c4, 0x260, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__GPIO2_6 IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__IPU_DIAGB_0 IOMUX_PAD(0x6c4, 0x260, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 IOMUX_PAD(0x6c4, 0x260, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_CS1__ATA_CS1 IOMUX_PAD(0x6c8, 0x264, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2 IOMUX_PAD(0x6c8, 0x264, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__CSPI2_SS0 IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__GPIO2_7 IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__IPU_DIAGB_1 IOMUX_PAD(0x6c8, 0x264, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 IOMUX_PAD(0x6c8, 0x264, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DIOR__ATA_DIOR IOMUX_PAD(0x6cc, 0x268, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0 IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 IOMUX_PAD(0x6cc, 0x268, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__CSPI2_SS1 IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__GPIO2_8 IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2 IOMUX_PAD(0x6cc, 0x268, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 IOMUX_PAD(0x6cc, 0x268, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DIOW__ATA_DIOW IOMUX_PAD(0x6d0, 0x26c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1 IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP IOMUX_PAD(0x6d0, 0x26c, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 IOMUX_PAD(0x6d0, 0x26c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__CSPI2_MOSI IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__GPIO2_9 IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3 IOMUX_PAD(0x6d0, 0x26c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 IOMUX_PAD(0x6d0, 0x26c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DMACK__ATA_DMACK IOMUX_PAD(0x6d4, 0x270, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2 IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__CSPI2_MISO IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__GPIO2_10 IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4 IOMUX_PAD(0x6d4, 0x270, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 IOMUX_PAD(0x6d4, 0x270, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_RESET_B__ATA_RESET_B IOMUX_PAD(0x6d8, 0x274, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O IOMUX_PAD(0x6d8, 0x274, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__CSPI2_RDY IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__GPIO2_11 IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 IOMUX_PAD(0x6d8, 0x274, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 IOMUX_PAD(0x6d8, 0x274, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_IORDY__ATA_IORDY IOMUX_PAD(0x6dc, 0x278, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4 IOMUX_PAD(0x6dc, 0x278, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4 IOMUX_PAD(0x6dc, 0x278, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__GPIO2_12 IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6 IOMUX_PAD(0x6dc, 0x278, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 IOMUX_PAD(0x6dc, 0x278, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA0__ATA_DATA_0 IOMUX_PAD(0x6e0, 0x27c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5 IOMUX_PAD(0x6e0, 0x27c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5 IOMUX_PAD(0x6e0, 0x27c, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__GPIO2_13 IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7 IOMUX_PAD(0x6e0, 0x27c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 IOMUX_PAD(0x6e0, 0x27c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA1__ATA_DATA_1 IOMUX_PAD(0x6e4, 0x280, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6 IOMUX_PAD(0x6e4, 0x280, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK IOMUX_PAD(0x6e4, 0x280, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6 IOMUX_PAD(0x6e4, 0x280, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__GPIO2_14 IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8 IOMUX_PAD(0x6e4, 0x280, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 IOMUX_PAD(0x6e4, 0x280, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA2__ATA_DATA_2 IOMUX_PAD(0x6e8, 0x284, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7 IOMUX_PAD(0x6e8, 0x284, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS IOMUX_PAD(0x6e8, 0x284, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7 IOMUX_PAD(0x6e8, 0x284, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__GPIO2_15 IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9 IOMUX_PAD(0x6e8, 0x284, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 IOMUX_PAD(0x6e8, 0x284, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA3__ATA_DATA_3 IOMUX_PAD(0x6e8, 0x288, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__ESDHC3_CLK IOMUX_PAD(0x6e8, 0x288, 1, 0x814, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x6e8, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__CSPI2_SCLK IOMUX_PAD(0x6e8, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__GPIO2_16 IOMUX_PAD(0x6e8, 0x288, 5, 0x884, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 IOMUX_PAD(0x6e8, 0x288, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 IOMUX_PAD(0x6e8, 0x288, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA4__ATA_DATA_4 IOMUX_PAD(0x6f0, 0x28c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__ESDHC3_CMD IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__GPIO2_17 IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11 IOMUX_PAD(0x6f0, 0x28c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 IOMUX_PAD(0x6f0, 0x28c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA5__ATA_DATA_5 IOMUX_PAD(0x6f4, 0x290, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__GPIO2_18 IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12 IOMUX_PAD(0x6f4, 0x290, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 IOMUX_PAD(0x6f4, 0x290, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA6__ATA_DATA_6 IOMUX_PAD(0x6f8, 0x294, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__CAN1_TXCAN IOMUX_PAD(0x6f8, 0x294, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__UART1_DTR IOMUX_PAD(0x6f8, 0x294, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__GPIO2_19 IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13 IOMUX_PAD(0x6f8, 0x294, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA7__ATA_DATA_7 IOMUX_PAD(0x6fc, 0x298, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__CAN1_RXCAN IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__UART1_DSR IOMUX_PAD(0x6fc, 0x298, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__GPIO2_20 IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14 IOMUX_PAD(0x6fc, 0x298, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA8__ATA_DATA_8 IOMUX_PAD(0x700, 0x29c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__UART3_RTS IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__UART1_RI IOMUX_PAD(0x700, 0x29c, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__GPIO2_21 IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15 IOMUX_PAD(0x700, 0x29c, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA9__ATA_DATA_9 IOMUX_PAD(0x704, 0x2a0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__UART3_CTS IOMUX_PAD(0x704, 0x2a0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__UART1_DCD IOMUX_PAD(0x704, 0x2a0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__GPIO2_22 IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16 IOMUX_PAD(0x704, 0x2a0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA10__ATA_DATA_10 IOMUX_PAD(0x708, 0x2a4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__GPIO2_23 IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17 IOMUX_PAD(0x708, 0x2a4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA11__ATA_DATA_11 IOMUX_PAD(0x70c, 0x2a8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX IOMUX_PAD(0x70c, 0x2a8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__GPIO2_24 IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18 IOMUX_PAD(0x70c, 0x2a8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA12__ATA_DATA_12 IOMUX_PAD(0x710, 0x2ac, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA12__I2C3_SCL IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA12__GPIO2_25 IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19 IOMUX_PAD(0x710, 0x2ac, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA13__ATA_DATA_13 IOMUX_PAD(0x714, 0x2b0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA13__I2C3_SDA IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA13__GPIO2_26 IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20 IOMUX_PAD(0x714, 0x2b0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA14__ATA_DATA_14 IOMUX_PAD(0x718, 0x2b4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0 IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__KPP_ROW_0 IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__GPIO2_27 IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21 IOMUX_PAD(0x718, 0x2b4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA15__ATA_DATA_15 IOMUX_PAD(0x71c, 0x2b8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1 IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__KPP_ROW_1 IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__GPIO2_28 IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22 IOMUX_PAD(0x71c, 0x2b8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_INTRQ__ATA_INTRQ IOMUX_PAD(0x720, 0x2bc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__KPP_ROW_2 IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__GPIO2_29 IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 IOMUX_PAD(0x720, 0x2bc, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN IOMUX_PAD(0x724, 0x2c0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__GPIO2_30 IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 IOMUX_PAD(0x724, 0x2c0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DMARQ__ATA_DMARQ IOMUX_PAD(0x728, 0x2c4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__KPP_COL_0 IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__GPIO2_31 IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 IOMUX_PAD(0x728, 0x2c4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 IOMUX_PAD(0x728, 0x2c4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DA0__ATA_DA_0 IOMUX_PAD(0x72c, 0x2c8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__IPU_CSI_D_5 IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__KPP_COL_1 IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__GPIO3_0 IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__IPU_DIAGB_26 IOMUX_PAD(0x72c, 0x2c8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 IOMUX_PAD(0x72c, 0x2c8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DA1__ATA_DA_1 IOMUX_PAD(0x730, 0x2cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__IPU_CSI_D_6 IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__KPP_COL_2 IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__GPIO3_1 IOMUX_PAD(0x730, 0x2cc, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__IPU_DIAGB_27 IOMUX_PAD(0x730, 0x2cc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 IOMUX_PAD(0x730, 0x2cc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DA2__ATA_DA_2 IOMUX_PAD(0x734, 0x2d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__IPU_CSI_D_7 IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__KPP_COL_3 IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__GPIO3_2 IOMUX_PAD(0x734, 0x2d0, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__IPU_DIAGB_28 IOMUX_PAD(0x734, 0x2d0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 IOMUX_PAD(0x734, 0x2d0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_MLB_CLK__MLB_MLBCLK IOMUX_PAD(0x738, 0x2d4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_MLB_CLK__GPIO3_3 IOMUX_PAD(0x738, 0x2d4, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_MLB_DAT__MLB_MLBDAT IOMUX_PAD(0x73c, 0x2d8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_MLB_DAT__GPIO3_4 IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL) + +#define MX35_PAD_MLB_SIG__MLB_MLBSIG IOMUX_PAD(0x740, 0x2dc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_MLB_SIG__GPIO3_5 IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x744, 0x2e0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__GPIO3_6 IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 IOMUX_PAD(0x744, 0x2e0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK IOMUX_PAD(0x748, 0x2e4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX IOMUX_PAD(0x748, 0x2e4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP IOMUX_PAD(0x748, 0x2e4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__GPIO3_7 IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 IOMUX_PAD(0x748, 0x2e4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x74c, 0x2e8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__UART3_RTS IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__GPIO3_8 IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK IOMUX_PAD(0x74c, 0x2e8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 IOMUX_PAD(0x74c, 0x2e8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_COL__FEC_COL IOMUX_PAD(0x750, 0x2ec, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__ESDHC1_DAT7 IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__UART3_CTS IOMUX_PAD(0x750, 0x2ec, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__CSPI2_RDY IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__GPIO3_9 IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS IOMUX_PAD(0x750, 0x2ec, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 IOMUX_PAD(0x750, 0x2ec, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0 IOMUX_PAD(0x754, 0x2f0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__PWM_PWMO IOMUX_PAD(0x754, 0x2f0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__UART3_DTR IOMUX_PAD(0x754, 0x2f0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__CSPI2_SS0 IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__GPIO3_10 IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 IOMUX_PAD(0x754, 0x2f0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 IOMUX_PAD(0x754, 0x2f0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0 IOMUX_PAD(0x758, 0x2f4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x758, 0x2f4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__UART3_DSR IOMUX_PAD(0x758, 0x2f4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__CSPI2_SS1 IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__GPIO3_11 IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 IOMUX_PAD(0x758, 0x2f4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 IOMUX_PAD(0x758, 0x2f4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x75c, 0x2f8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__UART3_RI IOMUX_PAD(0x75c, 0x2f8, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__GPIO3_12 IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS IOMUX_PAD(0x75c, 0x2f8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 IOMUX_PAD(0x75c, 0x2f8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x760, 0x2fc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__CAN2_TXCAN IOMUX_PAD(0x760, 0x2fc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__UART3_DCD IOMUX_PAD(0x760, 0x2fc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__GPIO3_13 IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__IPU_DISPB_WR IOMUX_PAD(0x760, 0x2fc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 IOMUX_PAD(0x760, 0x2fc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x764, 0x300, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__CAN2_RXCAN IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__GPIO3_14 IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD IOMUX_PAD(0x764, 0x300, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 IOMUX_PAD(0x764, 0x300, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR IOMUX_PAD(0x768, 0x304, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__GPIO3_15 IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 IOMUX_PAD(0x768, 0x304, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR IOMUX_PAD(0x76c, 0x308, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__KPP_COL_4 IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__GPIO3_16 IOMUX_PAD(0x76c, 0x308, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL) + +#define MX35_PAD_FEC_CRS__FEC_CRS IOMUX_PAD(0x770, 0x30c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__IPU_CSI_D_1 IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR IOMUX_PAD(0x770, 0x30c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__KPP_COL_5 IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__GPIO3_17 IOMUX_PAD(0x770, 0x30c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE IOMUX_PAD(0x770, 0x30c, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1 IOMUX_PAD(0x774, 0x310, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC IOMUX_PAD(0x774, 0x310, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__KPP_COL_6 IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__GPIO3_18 IOMUX_PAD(0x774, 0x310, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 IOMUX_PAD(0x774, 0x310, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1 IOMUX_PAD(0x778, 0x314, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__KPP_COL_7 IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__GPIO3_19 IOMUX_PAD(0x778, 0x314, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 IOMUX_PAD(0x778, 0x314, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2 IOMUX_PAD(0x77c, 0x318, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__KPP_ROW_4 IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__GPIO3_20 IOMUX_PAD(0x77c, 0x318, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2 IOMUX_PAD(0x780, 0x31c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__KPP_ROW_5 IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__GPIO3_21 IOMUX_PAD(0x780, 0x31c, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3 IOMUX_PAD(0x784, 0x320, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__KPP_ROW_6 IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__GPIO3_22 IOMUX_PAD(0x784, 0x320, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3 IOMUX_PAD(0x788, 0x324, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__KPP_ROW_7 IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__GPIO3_23 IOMUX_PAD(0x788, 0x324, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK IOMUX_PAD(0x78c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TEST_MODE__TCU_TEST_MODE IOMUX_PAD(0x790, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + + +#endif /* __MACH_IOMUX_MX35_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h new file mode 100644 index 0000000..7cd8454 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -0,0 +1,121 @@ +/* + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * <armlinux@phytec.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IOMUX_V3_H__ +#define __MACH_IOMUX_V3_H__ + +/* + * build IOMUX_PAD structure + * + * This iomux scheme is based around pads, which are the physical balls + * on the processor. + * + * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls + * things like driving strength and pullup/pulldown. + * - Each pad can have but not necessarily does have an output routing register + * (IOMUXC_SW_MUX_CTL_PAD_x). + * - Each pad can have but not necessarily does have an input routing register + * (IOMUXC_x_SELECT_INPUT) + * + * The three register sets do not have a fixed offset to each other, + * hence we order this table by pad control registers (which all pads + * have) and put the optional i/o routing registers into additional + * fields. + * + * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named + * GPIO_<unit>_<num> + * + */ + +struct pad_desc { + unsigned mux_ctrl_ofs:12; /* IOMUXC_SW_MUX_CTL_PAD offset */ + unsigned mux_mode:8; + unsigned pad_ctrl_ofs:12; /* IOMUXC_SW_PAD_CTRL offset */ +#define NO_PAD_CTRL (1 << 16) + unsigned pad_ctrl:17; + unsigned select_input_ofs:12; /* IOMUXC_SELECT_INPUT offset */ + unsigned select_input:3; +}; + +#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \ + _select_input, _pad_ctrl) \ + { \ + .mux_ctrl_ofs = _mux_ctrl_ofs, \ + .mux_mode = _mux_mode, \ + .pad_ctrl_ofs = _pad_ctrl_ofs, \ + .pad_ctrl = _pad_ctrl, \ + .select_input_ofs = _select_input_ofs, \ + .select_input = _select_input, \ + } + +/* + * Use to set PAD control + */ +#define PAD_CTL_DRIVE_VOLTAGE_3_3_V 0 +#define PAD_CTL_DRIVE_VOLTAGE_1_8_V 1 + +#define PAD_CTL_NO_HYSTERESIS 0 +#define PAD_CTL_HYSTERESIS 1 + +#define PAD_CTL_PULL_DISABLED 0x0 +#define PAD_CTL_PULL_KEEPER 0xa +#define PAD_CTL_PULL_DOWN_100K 0xc +#define PAD_CTL_PULL_UP_47K 0xd +#define PAD_CTL_PULL_UP_100K 0xe +#define PAD_CTL_PULL_UP_22K 0xf + +#define PAD_CTL_OUTPUT_CMOS 0 +#define PAD_CTL_OUTPUT_OPEN_DRAIN 1 + +#define PAD_CTL_DRIVE_STRENGTH_NORM 0 +#define PAD_CTL_DRIVE_STRENGTH_HIGH 1 +#define PAD_CTL_DRIVE_STRENGTH_MAX 2 + +#define PAD_CTL_SLEW_RATE_SLOW 0 +#define PAD_CTL_SLEW_RATE_FAST 1 + +/* + * setups a single pad: + * - reserves the pad so that it is not claimed by another driver + * - setups the iomux according to the configuration + */ +int mxc_iomux_v3_setup_pad(struct pad_desc *pad); + +/* + * setups mutliple pads + * convenient way to call the above function with tables + */ +int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count); + +/* + * releases a single pad: + * - make it available for a future use by another driver + * - DOES NOT reconfigure the IOMUX in its reset state + */ +void mxc_iomux_v3_release_pad(struct pad_desc *pad); + +/* + * releases multiple pads + * convenvient way to call the above function with tables + */ +void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count); + +#endif /* __MACH_IOMUX_V3_H__*/ + diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index eca37d09f..6065e00 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -32,4 +32,12 @@ #define CONSISTENT_DMA_SIZE SZ_4M #endif /* CONFIG_MX1_VIDEO */ +#if defined(CONFIG_MX3_VIDEO) +/* + * Increase size of DMA-consistent memory region. + * This is required for mx3 camera driver to capture at least two QXGA frames. + */ +#define CONSISTENT_DMA_SIZE SZ_8M +#endif /* CONFIG_MX3_VIDEO */ + #endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index b92e023..1000bf3 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -179,7 +179,7 @@ #define DMA_REQ_UART1_T 30 #define DMA_REQ_UART1_R 31 -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR IO_ADDRESS(UART1_BASE_ADDR) diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index 3878c60..b559a4b 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -48,6 +48,9 @@ #define CS4_SIZE SZ_32M #define CS5_BASE_ADDR 0xB6000000 +#define CS5_BASE_ADDR_VIRT 0xF6000000 +#define CS5_SIZE SZ_32M + #define PCMCIA_MEM_BASE_ADDR 0xBC000000 /* @@ -191,6 +194,9 @@ #define CS4_IO_ADDRESS(x) \ (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) +#define CS5_IO_ADDRESS(x) \ + (((x) - CS5_BASE_ADDR) + CS5_BASE_ADDR_VIRT) + #define X_MEMC_IO_ADDRESS(x) \ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h deleted file mode 100644 index 6c19a13..0000000 --- a/arch/arm/plat-mxc/include/mach/mxc_timer.h +++ /dev/null @@ -1,158 +0,0 @@ -/* - * mxc_timer.h - * - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef __PLAT_MXC_TIMER_H -#define __PLAT_MXC_TIMER_H - -#include <linux/clk.h> -#include <mach/hardware.h> - -#ifdef CONFIG_ARCH_MX1 -#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR) -#define TIMER_INTERRUPT TIM1_INT - -#define TCTL_VAL TCTL_CLK_PCLK1 -#define TCTL_IRQEN (1<<4) -#define TCTL_FRR (1<<8) -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_4 (2<<1) -#define TCTL_CLK_TIN (3<<1) -#define TCTL_CLK_32 (4<<1) - -#define MXC_TCTL 0x00 -#define MXC_TPRER 0x04 -#define MXC_TCMP 0x08 -#define MXC_TCR 0x0c -#define MXC_TCN 0x10 -#define MXC_TSTAT 0x14 -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -static inline void gpt_irq_disable(void) -{ - unsigned int tmp; - - tmp = __raw_readl(TIMER_BASE + MXC_TCTL); - __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, - TIMER_BASE + MXC_TCTL); -} - -static void gpt_irq_acknowledge(void) -{ - __raw_writel(0, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX1 */ - -#ifdef CONFIG_ARCH_MX2 -#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) -#define TIMER_INTERRUPT MXC_INT_GPT1 - -#define MXC_TCTL 0x00 -#define TCTL_VAL TCTL_CLK_PCLK1 -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_4 (2<<1) -#define TCTL_IRQEN (1<<4) -#define TCTL_FRR (1<<8) -#define MXC_TPRER 0x04 -#define MXC_TCMP 0x08 -#define MXC_TCR 0x0c -#define MXC_TCN 0x10 -#define MXC_TSTAT 0x14 -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -static inline void gpt_irq_disable(void) -{ - unsigned int tmp; - - tmp = __raw_readl(TIMER_BASE + MXC_TCTL); - __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, - TIMER_BASE + MXC_TCTL); -} - -static void gpt_irq_acknowledge(void) -{ - __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX2 */ - -#ifdef CONFIG_ARCH_MX3 -#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) -#define TIMER_INTERRUPT MXC_INT_GPT - -#define MXC_TCTL 0x00 -#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN) -#define TCTL_CLK_IPG (1<<6) -#define TCTL_FRR (1<<9) -#define TCTL_WAITEN (1<<3) - -#define MXC_TPRER 0x04 -#define MXC_TSTAT 0x08 -#define TSTAT_OF1 (1<<0) -#define TSTAT_OF2 (1<<1) -#define TSTAT_OF3 (1<<2) -#define TSTAT_IF1 (1<<3) -#define TSTAT_IF2 (1<<4) -#define TSTAT_ROV (1<<5) -#define MXC_IR 0x0c -#define MXC_TCMP 0x10 -#define MXC_TCMP2 0x14 -#define MXC_TCMP3 0x18 -#define MXC_TCR 0x1c -#define MXC_TCN 0x24 - -static inline void gpt_irq_disable(void) -{ - __raw_writel(0, TIMER_BASE + MXC_IR); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(1<<0, TIMER_BASE + MXC_IR); -} - -static inline void gpt_irq_acknowledge(void) -{ - __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX3 */ - -#define TCTL_SWR (1<<15) -#define TCTL_CC (1<<10) -#define TCTL_OM (1<<9) -#define TCTL_CAP_RIS (1<<6) -#define TCTL_CAP_FAL (2<<6) -#define TCTL_CAP_RIS_FAL (3<<6) -#define TCTL_CAP_ENA (1<<5) -#define TCTL_TEN (1<<0) - -#endif diff --git a/arch/arm/plat-mxc/include/mach/usb.h b/arch/arm/plat-mxc/include/mach/usb.h index 2dacb308..be27337 100644 --- a/arch/arm/plat-mxc/include/mach/usb.h +++ b/arch/arm/plat-mxc/include/mach/usb.h @@ -17,7 +17,7 @@ struct imxusb_platform_data { int (*init)(struct device *); - int (*exit)(struct device *); + void (*exit)(struct device *); }; #endif /* __ASM_ARCH_MXC_USB */ diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c new file mode 100644 index 0000000..77a078f --- /dev/null +++ b/arch/arm/plat-mxc/iomux-v3.c @@ -0,0 +1,98 @@ +/* + * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * <armlinux@phytec.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <asm/mach/map.h> +#include <mach/iomux-v3.h> + +#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR) + +static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG]; + +/* + * setups a single pin: + * - reserves the pin so that it is not claimed by another driver + * - setups the iomux according to the configuration + */ +int mxc_iomux_v3_setup_pad(struct pad_desc *pad) +{ + unsigned int pad_ofs = pad->pad_ctrl_ofs; + + if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map)) + return -EBUSY; + if (pad->mux_ctrl_ofs) + __raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs); + + if (pad->select_input_ofs) + __raw_writel(pad->select_input, + IOMUX_BASE + pad->select_input_ofs); + + if (!(pad->pad_ctrl & NO_PAD_CTRL)) + __raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs); + return 0; +} +EXPORT_SYMBOL(mxc_iomux_v3_setup_pad); + +int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count) +{ + struct pad_desc *p = pad_list; + int i; + int ret; + + for (i = 0; i < count; i++) { + ret = mxc_iomux_v3_setup_pad(p); + if (ret) + goto setup_error; + p++; + } + return 0; + +setup_error: + mxc_iomux_v3_release_multiple_pads(pad_list, i); + return ret; +} +EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads); + +void mxc_iomux_v3_release_pad(struct pad_desc *pad) +{ + unsigned int pad_ofs = pad->pad_ctrl_ofs; + + clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map); +} +EXPORT_SYMBOL(mxc_iomux_v3_release_pad); + +void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count) +{ + struct pad_desc *p = pad_list; + int i; + + for (i = 0; i < count; i++) { + mxc_iomux_v3_release_pad(p); + p++; + } +} +EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads); diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 0fb68a5..8aee763 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -24,31 +24,27 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR) -#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */ -#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */ -#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */ -#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */ -#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */ -#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */ -#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */ -#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */ -#define AVIC_NIPRIORITY(x) (AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */ -#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */ -#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */ -#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */ -#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */ -#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */ -#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */ -#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */ -#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */ -#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */ -#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */ - -#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20) -#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24) -#define IIM_PROD_REV_SH 3 -#define IIM_PROD_REV_LEN 5 +#define AVIC_INTCNTL 0x00 /* int control reg */ +#define AVIC_NIMASK 0x04 /* int mask reg */ +#define AVIC_INTENNUM 0x08 /* int enable number reg */ +#define AVIC_INTDISNUM 0x0C /* int disable number reg */ +#define AVIC_INTENABLEH 0x10 /* int enable reg high */ +#define AVIC_INTENABLEL 0x14 /* int enable reg low */ +#define AVIC_INTTYPEH 0x18 /* int type reg high */ +#define AVIC_INTTYPEL 0x1C /* int type reg low */ +#define AVIC_NIPRIORITY(x) (0x20 + 4 * (7 - (x))) /* int priority */ +#define AVIC_NIVECSR 0x40 /* norm int vector/status */ +#define AVIC_FIVECSR 0x44 /* fast int vector/status */ +#define AVIC_INTSRCH 0x48 /* int source reg high */ +#define AVIC_INTSRCL 0x4C /* int source reg low */ +#define AVIC_INTFRCH 0x50 /* int force reg high */ +#define AVIC_INTFRCL 0x54 /* int force reg low */ +#define AVIC_NIPNDH 0x58 /* norm int pending high */ +#define AVIC_NIPNDL 0x5C /* norm int pending low */ +#define AVIC_FIPNDH 0x60 /* fast int pending high */ +#define AVIC_FIPNDL 0x64 /* fast int pending low */ + +static void __iomem *avic_base; int imx_irq_set_priority(unsigned char irq, unsigned char prio) { @@ -59,11 +55,11 @@ int imx_irq_set_priority(unsigned char irq, unsigned char prio) if (irq >= MXC_INTERNAL_IRQS) return -EINVAL;; - temp = __raw_readl(AVIC_NIPRIORITY(irq / 8)); + temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8)); temp &= ~mask; temp |= prio & mask; - __raw_writel(temp, AVIC_NIPRIORITY(irq / 8)); + __raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8)); return 0; #else @@ -81,12 +77,12 @@ int mxc_set_irq_fiq(unsigned int irq, unsigned int type) return -EINVAL; if (irq < MXC_INTERNAL_IRQS / 2) { - irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL); + irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq); + __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL); } else { irq -= MXC_INTERNAL_IRQS / 2; - irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH); + irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq); + __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH); } return 0; @@ -97,13 +93,13 @@ EXPORT_SYMBOL(mxc_set_irq_fiq); /* Disable interrupt number "irq" in the AVIC */ static void mxc_mask_irq(unsigned int irq) { - __raw_writel(irq, AVIC_INTDISNUM); + __raw_writel(irq, avic_base + AVIC_INTDISNUM); } /* Enable interrupt number "irq" in the AVIC */ static void mxc_unmask_irq(unsigned int irq) { - __raw_writel(irq, AVIC_INTENNUM); + __raw_writel(irq, avic_base + AVIC_INTENNUM); } static struct irq_chip mxc_avic_chip = { @@ -121,19 +117,21 @@ void __init mxc_init_irq(void) { int i; + avic_base = IO_ADDRESS(AVIC_BASE_ADDR); + /* put the AVIC into the reset value with * all interrupts disabled */ - __raw_writel(0, AVIC_INTCNTL); - __raw_writel(0x1f, AVIC_NIMASK); + __raw_writel(0, avic_base + AVIC_INTCNTL); + __raw_writel(0x1f, avic_base + AVIC_NIMASK); /* disable all interrupts */ - __raw_writel(0, AVIC_INTENABLEH); - __raw_writel(0, AVIC_INTENABLEL); + __raw_writel(0, avic_base + AVIC_INTENABLEH); + __raw_writel(0, avic_base + AVIC_INTENABLEL); /* all IRQ no FIQ */ - __raw_writel(0, AVIC_INTTYPEH); - __raw_writel(0, AVIC_INTTYPEL); + __raw_writel(0, avic_base + AVIC_INTTYPEH); + __raw_writel(0, avic_base + AVIC_INTTYPEL); for (i = 0; i < MXC_INTERNAL_IRQS; i++) { set_irq_chip(i, &mxc_avic_chip); set_irq_handler(i, handle_level_irq); @@ -142,7 +140,7 @@ void __init mxc_init_irq(void) /* Set default priority value (0) for all IRQ's */ for (i = 0; i < 8; i++) - __raw_writel(0, AVIC_NIPRIORITY(i)); + __raw_writel(0, avic_base + AVIC_NIPRIORITY(i)); /* init architectures chained interrupt handler */ mxc_register_gpios(); @@ -154,3 +152,4 @@ void __init mxc_init_irq(void) printk(KERN_INFO "MXC IRQ initialized\n"); } + diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 9bffbc5..ae34198 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -15,65 +15,26 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/pwm.h> +#include <mach/hardware.h> + + +/* i.MX1 and i.MX21 share the same PWM function block: */ + +#define MX1_PWMC 0x00 /* PWM Control Register */ +#define MX1_PWMS 0x04 /* PWM Sample Register */ +#define MX1_PWMP 0x08 /* PWM Period Register */ + + +/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */ + +#define MX3_PWMCR 0x00 /* PWM Control Register */ +#define MX3_PWMSAR 0x0C /* PWM Sample Register */ +#define MX3_PWMPR 0x10 /* PWM Period Register */ +#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) +#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) +#define MX3_PWMCR_EN (1 << 0) + -#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21 -#define PWM_VER_1 - -#define PWMCR 0x00 /* PWM Control Register */ -#define PWMSR 0x04 /* PWM Sample Register */ -#define PWMPR 0x08 /* PWM Period Register */ -#define PWMCNR 0x0C /* PWM Counter Register */ - -#define PWMCR_HCTR (1 << 18) /* Halfword FIFO Data Swapping */ -#define PWMCR_BCTR (1 << 17) /* Byte FIFO Data Swapping */ -#define PWMCR_SWR (1 << 16) /* Software Reset */ -#define PWMCR_CLKSRC_PERCLK (0 << 15) /* PERCLK Clock Source */ -#define PWMCR_CLKSRC_CLK32 (1 << 15) /* 32KHz Clock Source */ -#define PWMCR_PRESCALER(x) (((x - 1) & 0x7F) << 8) /* PRESCALER */ -#define PWMCR_IRQ (1 << 7) /* Interrupt Request */ -#define PWMCR_IRQEN (1 << 6) /* Interrupt Request Enable */ -#define PWMCR_FIFOAV (1 << 5) /* FIFO Available */ -#define PWMCR_EN (1 << 4) /* Enables/Disables the PWM */ -#define PWMCR_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */ -#define PWMCR_DIV(x) (((x) & 0x03) << 0) /* Clock divider 2/4/8/16 */ - -#define MAX_DIV (128 * 16) -#endif - -#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31 -#define PWM_VER_2 - -#define PWMCR 0x00 /* PWM Control Register */ -#define PWMSR 0x04 /* PWM Status Register */ -#define PWMIR 0x08 /* PWM Interrupt Register */ -#define PWMSAR 0x0C /* PWM Sample Register */ -#define PWMPR 0x10 /* PWM Period Register */ -#define PWMCNR 0x14 /* PWM Counter Register */ - -#define PWMCR_EN (1 << 0) /* Enables/Disables the PWM */ -#define PWMCR_REPEAT(x) (((x) & 0x03) << 1) /* Sample Repeats */ -#define PWMCR_SWR (1 << 3) /* Software Reset */ -#define PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)/* PRESCALER */ -#define PWMCR_CLKSRC(x) (((x) & 0x3) << 16) -#define PWMCR_CLKSRC_OFF (0 << 16) -#define PWMCR_CLKSRC_IPG (1 << 16) -#define PWMCR_CLKSRC_IPG_HIGH (2 << 16) -#define PWMCR_CLKSRC_CLK32 (3 << 16) -#define PWMCR_POUTC -#define PWMCR_HCTR (1 << 20) /* Halfword FIFO Data Swapping */ -#define PWMCR_BCTR (1 << 21) /* Byte FIFO Data Swapping */ -#define PWMCR_DBGEN (1 << 22) /* Debug Mode */ -#define PWMCR_WAITEN (1 << 23) /* Wait Mode */ -#define PWMCR_DOZEN (1 << 24) /* Doze Mode */ -#define PWMCR_STOPEN (1 << 25) /* Stop Mode */ -#define PWMCR_FWM(x) (((x) & 0x3) << 26) /* FIFO Water Mark */ - -#define MAX_DIV 4096 -#endif - -#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */ -#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */ -#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */ struct pwm_device { struct list_head node; @@ -91,32 +52,52 @@ struct pwm_device { int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) { - unsigned long long c; - unsigned long period_cycles, duty_cycles, prescale; - if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) return -EINVAL; - c = clk_get_rate(pwm->clk); - c = c * period_ns; - do_div(c, 1000000000); - period_cycles = c; - - prescale = period_cycles / 0x10000 + 1; - - period_cycles /= prescale; - c = (unsigned long long)period_cycles * duty_ns; - do_div(c, period_ns); - duty_cycles = c; - -#ifdef PWM_VER_2 - writel(duty_cycles, pwm->mmio_base + PWMSAR); - writel(period_cycles, pwm->mmio_base + PWMPR); - writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN, - pwm->mmio_base + PWMCR); -#elif defined PWM_VER_1 -#error PWM not yet working on MX1 / MX21 -#endif + if (cpu_is_mx27() || cpu_is_mx3()) { + unsigned long long c; + unsigned long period_cycles, duty_cycles, prescale; + c = clk_get_rate(pwm->clk); + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + prescale = period_cycles / 0x10000 + 1; + + period_cycles /= prescale; + c = (unsigned long long)period_cycles * duty_ns; + do_div(c, period_ns); + duty_cycles = c; + + writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR); + writel(period_cycles, pwm->mmio_base + MX3_PWMPR); + writel(MX3_PWMCR_PRESCALER(prescale - 1) | + MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN, + pwm->mmio_base + MX3_PWMCR); + } else if (cpu_is_mx1() || cpu_is_mx21()) { + /* The PWM subsystem allows for exact frequencies. However, + * I cannot connect a scope on my device to the PWM line and + * thus cannot provide the program the PWM controller + * exactly. Instead, I'm relying on the fact that the + * Bootloader (u-boot or WinCE+haret) has programmed the PWM + * function group already. So I'll just modify the PWM sample + * register to follow the ratio of duty_ns vs. period_ns + * accordingly. + * + * This is good enought for programming the brightness of + * the LCD backlight. + * + * The real implementation would divide PERCLK[0] first by + * both the prescaler (/1 .. /128) and then by CLKSEL + * (/2 .. /16). + */ + u32 max = readl(pwm->mmio_base + MX1_PWMP); + u32 p = max * duty_ns / period_ns; + writel(max - p, pwm->mmio_base + MX1_PWMS); + } else { + BUG(); + } return 0; } @@ -297,4 +278,3 @@ module_exit(mxc_pwm_exit); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); - diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index dab3357..88fb3a5 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -29,22 +29,85 @@ #include <mach/hardware.h> #include <asm/mach/time.h> #include <mach/common.h> -#include <mach/mxc_timer.h> + +/* defines common for all i.MX */ +#define MXC_TCTL 0x00 +#define MXC_TCTL_TEN (1 << 0) +#define MXC_TPRER 0x04 + +/* MX1, MX21, MX27 */ +#define MX1_2_TCTL_CLK_PCLK1 (1 << 1) +#define MX1_2_TCTL_IRQEN (1 << 4) +#define MX1_2_TCTL_FRR (1 << 8) +#define MX1_2_TCMP 0x08 +#define MX1_2_TCN 0x10 +#define MX1_2_TSTAT 0x14 + +/* MX21, MX27 */ +#define MX2_TSTAT_CAPT (1 << 1) +#define MX2_TSTAT_COMP (1 << 0) + +/* MX31, MX35 */ +#define MX3_TCTL_WAITEN (1 << 3) +#define MX3_TCTL_CLK_IPG (1 << 6) +#define MX3_TCTL_FRR (1 << 9) +#define MX3_IR 0x0c +#define MX3_TSTAT 0x08 +#define MX3_TSTAT_OF1 (1 << 0) +#define MX3_TCN 0x24 +#define MX3_TCMP 0x10 static struct clock_event_device clockevent_mxc; static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; -/* clock source */ +static void __iomem *timer_base; -static cycle_t mxc_get_cycles(struct clocksource *cs) +static inline void gpt_irq_disable(void) { - return __raw_readl(TIMER_BASE + MXC_TCN); + unsigned int tmp; + + if (cpu_is_mx3()) + __raw_writel(0, timer_base + MX3_IR); + else { + tmp = __raw_readl(timer_base + MXC_TCTL); + __raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL); + } +} + +static inline void gpt_irq_enable(void) +{ + if (cpu_is_mx3()) + __raw_writel(1<<0, timer_base + MX3_IR); + else { + __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN, + timer_base + MXC_TCTL); + } +} + +static void gpt_irq_acknowledge(void) +{ + if (cpu_is_mx1()) + __raw_writel(0, timer_base + MX1_2_TSTAT); + if (cpu_is_mx2()) + __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT); + if (cpu_is_mx3()) + __raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT); +} + +static cycle_t mx1_2_get_cycles(struct clocksource *cs) +{ + return __raw_readl(timer_base + MX1_2_TCN); +} + +static cycle_t mx3_get_cycles(struct clocksource *cs) +{ + return __raw_readl(timer_base + MX3_TCN); } static struct clocksource clocksource_mxc = { .name = "mxc_timer1", .rating = 200, - .read = mxc_get_cycles, + .read = mx1_2_get_cycles, .mask = CLOCKSOURCE_MASK(32), .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, @@ -54,6 +117,9 @@ static int __init mxc_clocksource_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); + if (cpu_is_mx3()) + clocksource_mxc.read = mx3_get_cycles; + clocksource_mxc.mult = clocksource_hz2mult(c, clocksource_mxc.shift); clocksource_register(&clocksource_mxc); @@ -63,15 +129,29 @@ static int __init mxc_clocksource_init(struct clk *timer_clk) /* clock event */ -static int mxc_set_next_event(unsigned long evt, +static int mx1_2_set_next_event(unsigned long evt, struct clock_event_device *unused) { unsigned long tcmp; - tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt; - __raw_writel(tcmp, TIMER_BASE + MXC_TCMP); + tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt; - return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ? + __raw_writel(tcmp, timer_base + MX1_2_TCMP); + + return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ? + -ETIME : 0; +} + +static int mx3_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long tcmp; + + tcmp = __raw_readl(timer_base + MX3_TCN) + evt; + + __raw_writel(tcmp, timer_base + MX3_TCMP); + + return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ? -ETIME : 0; } @@ -100,8 +180,13 @@ static void mxc_set_mode(enum clock_event_mode mode, if (mode != clockevent_mode) { /* Set event time into far-far future */ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3, - TIMER_BASE + MXC_TCMP); + if (cpu_is_mx3()) + __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3, + timer_base + MX3_TCMP); + else + __raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3, + timer_base + MX1_2_TCMP); + /* Clear pending interrupt */ gpt_irq_acknowledge(); } @@ -148,7 +233,10 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) struct clock_event_device *evt = &clockevent_mxc; uint32_t tstat; - tstat = __raw_readl(TIMER_BASE + MXC_TSTAT); + if (cpu_is_mx3()) + tstat = __raw_readl(timer_base + MX3_TSTAT); + else + tstat = __raw_readl(timer_base + MX1_2_TSTAT); gpt_irq_acknowledge(); @@ -168,7 +256,7 @@ static struct clock_event_device clockevent_mxc = { .features = CLOCK_EVT_FEAT_ONESHOT, .shift = 32, .set_mode = mxc_set_mode, - .set_next_event = mxc_set_next_event, + .set_next_event = mx1_2_set_next_event, .rating = 200, }; @@ -176,6 +264,9 @@ static int __init mxc_clockevent_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); + if (cpu_is_mx3()) + clockevent_mxc.set_next_event = mx3_set_next_event; + clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC, clockevent_mxc.shift); clockevent_mxc.max_delta_ns = @@ -192,23 +283,47 @@ static int __init mxc_clockevent_init(struct clk *timer_clk) void __init mxc_timer_init(struct clk *timer_clk) { + uint32_t tctl_val; + int irq; + clk_enable(timer_clk); + if (cpu_is_mx1()) { +#ifdef CONFIG_ARCH_MX1 + timer_base = IO_ADDRESS(TIM1_BASE_ADDR); + irq = TIM1_INT; +#endif + } else if (cpu_is_mx2()) { +#ifdef CONFIG_ARCH_MX2 + timer_base = IO_ADDRESS(GPT1_BASE_ADDR); + irq = MXC_INT_GPT1; +#endif + } else if (cpu_is_mx3()) { +#ifdef CONFIG_ARCH_MX3 + timer_base = IO_ADDRESS(GPT1_BASE_ADDR); + irq = MXC_INT_GPT; +#endif + } else + BUG(); + /* * Initialise to a known state (all timers off, and timing reset) */ - __raw_writel(0, TIMER_BASE + MXC_TCTL); - __raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */ - __raw_writel(TCTL_FRR | /* free running */ - TCTL_VAL | /* set clocksource and arch specific bits */ - TCTL_TEN, /* start the timer */ - TIMER_BASE + MXC_TCTL); + __raw_writel(0, timer_base + MXC_TCTL); + __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ + + if (cpu_is_mx3()) + tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN; + else + tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; + + __raw_writel(tctl_val, timer_base + MXC_TCTL); /* init and register the timer to the framework */ mxc_clocksource_init(timer_clk); mxc_clockevent_init(timer_clk); /* Make irqs happen */ - setup_irq(TIMER_INTERRUPT, &mxc_timer_irq); + setup_irq(irq, &mxc_timer_irq); } diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 9dd68fa..efe85d0 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -23,6 +23,11 @@ config ARCH_OMAP3 select CPU_V7 select COMMON_CLKDEV +config ARCH_OMAP4 + bool "TI OMAP4" + select CPU_V7 + select ARM_GIC + endchoice comment "OMAP Feature Selections" @@ -40,7 +45,6 @@ config OMAP_DEBUG_LEDS config OMAP_DEBUG_POWERDOMAIN bool "Emit debug messages from powerdomain layer" depends on ARCH_OMAP2 || ARCH_OMAP3 - default n help Say Y here if you want to compile in powerdomain layer debugging messages for OMAP2/3. These messages can @@ -52,7 +56,6 @@ config OMAP_DEBUG_POWERDOMAIN config OMAP_DEBUG_CLOCKDOMAIN bool "Emit debug messages from clockdomain layer" depends on ARCH_OMAP2 || ARCH_OMAP3 - default n help Say Y here if you want to compile in clockdomain layer debugging messages for OMAP2/3. These messages can @@ -110,11 +113,13 @@ config OMAP_MCBSP config OMAP_MBOX_FWK tristate "Mailbox framework support" depends on ARCH_OMAP - default n help Say Y here if you want to use OMAP Mailbox framework support for DSP, IVA1.0 and IVA2 in OMAP1/2/3. +config OMAP_IOMMU + tristate + choice prompt "System timer" default OMAP_MPU_TIMER @@ -128,13 +133,13 @@ config OMAP_MPU_TIMER config OMAP_32K_TIMER bool "Use 32KHz timer" - depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4 help Select this option if you want to enable the OMAP 32KHz timer. This timer saves power compared to the OMAP_MPU_TIMER, and has support for no tick during idle. The 32KHz timer provides less intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is - currently only available for OMAP16XX, 24XX and 34XX. + currently only available for OMAP16XX, 24XX, 34XX and OMAP4. endchoice @@ -149,7 +154,7 @@ config OMAP_32K_TIMER_HZ config OMAP_DM_TIMER bool "Use dual-mode timer" - depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4 help Select this option if you want to use OMAP Dual-Mode timers. @@ -171,7 +176,7 @@ endchoice config OMAP_SERIAL_WAKE bool "Enable wake-up events for serial ports" - depends on OMAP_MUX + depends on ARCH_OMAP1 && OMAP_MUX default y help Select this option if you want to have your system wake up diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 04a100c..a832795 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -13,6 +13,7 @@ obj- := obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o +obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o obj-$(CONFIG_CPU_FREQ) += cpu-omap.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 2e06145..e8c327a 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -36,10 +36,40 @@ static struct clk_functions *arch_clock; * Standard clock functions defined in include/linux/clk.h *-------------------------------------------------------------------------*/ +/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since + * clock framework is not up , it is defined here to avoid rework in + * every driver. Also dummy prcm reset function is added */ + +/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */ +#if defined(CONFIG_ARCH_OMAP4) +struct clk *clk_get(struct device *dev, const char *id) +{ + return NULL; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + +void omap2_clk_prepare_for_reboot(void) +{ +} +EXPORT_SYMBOL(omap2_clk_prepare_for_reboot); + +void omap_prcm_arch_reset(char mode) +{ +} +EXPORT_SYMBOL(omap_prcm_arch_reset); +#endif int clk_enable(struct clk *clk) { unsigned long flags; int ret = 0; + if (cpu_is_omap44xx()) + /* OMAP4 clk framework not supported yet */ + return 0; if (clk == NULL || IS_ERR(clk)) return -EINVAL; @@ -140,6 +170,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent) unsigned long flags; int ret = -EINVAL; + if (cpu_is_omap44xx()) + /* OMAP4 clk framework not supported yet */ + return 0; if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent)) return ret; @@ -239,7 +272,14 @@ void recalculate_root_clocks(void) } } -void clk_init_one(struct clk *clk) +/** + * clk_preinit - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ +void clk_preinit(struct clk *clk) { INIT_LIST_HEAD(&clk->children); } diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 433021f..ebcf0064 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -2,6 +2,10 @@ * linux/arch/arm/plat-omap/common.c * * Code common to all OMAP machines. + * The file is created by Tony Lindgren <tony@atomide.com> + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,7 +15,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/pm.h> #include <linux/console.h> #include <linux/serial.h> #include <linux/tty.h> @@ -175,25 +178,70 @@ console_initcall(omap_add_serial_console); * but systems won't necessarily want to spend resources that way. */ -#if defined(CONFIG_ARCH_OMAP16XX) -#define TIMER_32K_SYNCHRONIZED 0xfffbc410 -#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) -#define TIMER_32K_SYNCHRONIZED (OMAP2_32KSYNCT_BASE + 0x10) -#endif +#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410 -#ifdef TIMER_32K_SYNCHRONIZED +#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) #include <linux/clocksource.h> -static cycle_t omap_32k_read(struct clocksource *cs) +#ifdef CONFIG_ARCH_OMAP16XX +static cycle_t omap16xx_32k_read(struct clocksource *cs) +{ + return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED); +} +#else +#define omap16xx_32k_read NULL +#endif + +#ifdef CONFIG_ARCH_OMAP2420 +static cycle_t omap2420_32k_read(struct clocksource *cs) +{ + return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10); +} +#else +#define omap2420_32k_read NULL +#endif + +#ifdef CONFIG_ARCH_OMAP2430 +static cycle_t omap2430_32k_read(struct clocksource *cs) +{ + return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10); +} +#else +#define omap2430_32k_read NULL +#endif + +#ifdef CONFIG_ARCH_OMAP34XX +static cycle_t omap34xx_32k_read(struct clocksource *cs) +{ + return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10); +} +#else +#define omap34xx_32k_read NULL +#endif + +#ifdef CONFIG_ARCH_OMAP4 +static cycle_t omap44xx_32k_read(struct clocksource *cs) { - return omap_readl(TIMER_32K_SYNCHRONIZED); + return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10); +} +#else +#define omap44xx_32k_read NULL +#endif + +/* + * Kernel assumes that sched_clock can be called early but may not have + * things ready yet. + */ +static cycle_t omap_32k_read_dummy(struct clocksource *cs) +{ + return 0; } static struct clocksource clocksource_32k = { .name = "32k_counter", .rating = 250, - .read = omap_32k_read, + .read = omap_32k_read_dummy, .mask = CLOCKSOURCE_MASK(32), .shift = 10, .flags = CLOCK_SOURCE_IS_CONTINUOUS, @@ -207,7 +255,7 @@ unsigned long long sched_clock(void) { unsigned long long ret; - ret = (unsigned long long)omap_32k_read(&clocksource_32k); + ret = (unsigned long long)clocksource_32k.read(&clocksource_32k); ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift; return ret; } @@ -220,6 +268,19 @@ static int __init omap_init_clocksource_32k(void) if (cpu_is_omap16xx() || cpu_class_is_omap2()) { struct clk *sync_32k_ick; + if (cpu_is_omap16xx()) + clocksource_32k.read = omap16xx_32k_read; + else if (cpu_is_omap2420()) + clocksource_32k.read = omap2420_32k_read; + else if (cpu_is_omap2430()) + clocksource_32k.read = omap2430_32k_read; + else if (cpu_is_omap34xx()) + clocksource_32k.read = omap34xx_32k_read; + else if (cpu_is_omap44xx()) + clocksource_32k.read = omap44xx_32k_read; + else + return -ENODEV; + sync_32k_ick = clk_get(NULL, "omap_32ksync_ick"); if (sync_32k_ick) clk_enable(sync_32k_ick); @@ -234,15 +295,13 @@ static int __init omap_init_clocksource_32k(void) } arch_initcall(omap_init_clocksource_32k); -#endif /* TIMER_32K_SYNCHRONIZED */ +#endif /* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */ /* Global address base setup code */ #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) -static struct omap_globals *omap2_globals; - -static void __init __omap2_set_globals(void) +static void __init __omap2_set_globals(struct omap_globals *omap2_globals) { omap2_set_globals_tap(omap2_globals); omap2_set_globals_sdrc(omap2_globals); @@ -266,8 +325,7 @@ static struct omap_globals omap242x_globals = { void __init omap2_set_globals_242x(void) { - omap2_globals = &omap242x_globals; - __omap2_set_globals(); + __omap2_set_globals(&omap242x_globals); } #endif @@ -285,8 +343,7 @@ static struct omap_globals omap243x_globals = { void __init omap2_set_globals_243x(void) { - omap2_globals = &omap243x_globals; - __omap2_set_globals(); + __omap2_set_globals(&omap243x_globals); } #endif @@ -304,8 +361,23 @@ static struct omap_globals omap343x_globals = { void __init omap2_set_globals_343x(void) { - omap2_globals = &omap343x_globals; - __omap2_set_globals(); + __omap2_set_globals(&omap343x_globals); +} +#endif + +#if defined(CONFIG_ARCH_OMAP4) +static struct omap_globals omap4_globals = { + .class = OMAP443X_CLASS, + .tap = OMAP2_IO_ADDRESS(0x4830a000), + .ctrl = OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE), + .prm = OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE), + .cm = OMAP2_IO_ADDRESS(OMAP4430_CM_BASE), +}; + +void __init omap2_set_globals_443x(void) +{ + omap2_set_globals_tap(&omap4_globals); + omap2_set_globals_control(&omap4_globals); } #endif diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 87fb7ff..a64b692 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -311,6 +311,8 @@ static void omap_init_wdt(void) wdt_resources[0].start = 0x49016000; /* WDT2 */ else if (cpu_is_omap343x()) wdt_resources[0].start = 0x48314000; /* WDT2 */ + else if (cpu_is_omap44xx()) + wdt_resources[0].start = 0x4a314000; else return; diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 21cc014..def14ec 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -10,6 +10,9 @@ * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com> * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * Support functions for the OMAP internal DMA channels. * * This program is free software; you can redistribute it and/or modify @@ -310,41 +313,62 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params); void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) { - u16 w; - BUG_ON(omap_dma_in_1510_mode()); - if (cpu_class_is_omap2()) { - REVISIT_24XX(); - return; - } + if (cpu_class_is_omap1()) { + u16 w; - w = dma_read(CCR2(lch)); - w &= ~0x03; + w = dma_read(CCR2(lch)); + w &= ~0x03; - switch (mode) { - case OMAP_DMA_CONSTANT_FILL: - w |= 0x01; - break; - case OMAP_DMA_TRANSPARENT_COPY: - w |= 0x02; - break; - case OMAP_DMA_COLOR_DIS: - break; - default: - BUG(); + switch (mode) { + case OMAP_DMA_CONSTANT_FILL: + w |= 0x01; + break; + case OMAP_DMA_TRANSPARENT_COPY: + w |= 0x02; + break; + case OMAP_DMA_COLOR_DIS: + break; + default: + BUG(); + } + dma_write(w, CCR2(lch)); + + w = dma_read(LCH_CTRL(lch)); + w &= ~0x0f; + /* Default is channel type 2D */ + if (mode) { + dma_write((u16)color, COLOR_L(lch)); + dma_write((u16)(color >> 16), COLOR_U(lch)); + w |= 1; /* Channel type G */ + } + dma_write(w, LCH_CTRL(lch)); } - dma_write(w, CCR2(lch)); - w = dma_read(LCH_CTRL(lch)); - w &= ~0x0f; - /* Default is channel type 2D */ - if (mode) { - dma_write((u16)color, COLOR_L(lch)); - dma_write((u16)(color >> 16), COLOR_U(lch)); - w |= 1; /* Channel type G */ + if (cpu_class_is_omap2()) { + u32 val; + + val = dma_read(CCR(lch)); + val &= ~((1 << 17) | (1 << 16)); + + switch (mode) { + case OMAP_DMA_CONSTANT_FILL: + val |= 1 << 16; + break; + case OMAP_DMA_TRANSPARENT_COPY: + val |= 1 << 17; + break; + case OMAP_DMA_COLOR_DIS: + break; + default: + BUG(); + } + dma_write(val, CCR(lch)); + + color &= 0xffffff; + dma_write(color, COLOR(lch)); } - dma_write(w, LCH_CTRL(lch)); } EXPORT_SYMBOL(omap_set_dma_color_mode); @@ -760,19 +784,12 @@ void omap_free_dma(int lch) { unsigned long flags; - spin_lock_irqsave(&dma_chan_lock, flags); if (dma_chan[lch].dev_id == -1) { pr_err("omap_dma: trying to free unallocated DMA channel %d\n", lch); - spin_unlock_irqrestore(&dma_chan_lock, flags); return; } - dma_chan[lch].dev_id = -1; - dma_chan[lch].next_lch = -1; - dma_chan[lch].callback = NULL; - spin_unlock_irqrestore(&dma_chan_lock, flags); - if (cpu_class_is_omap1()) { /* Disable all DMA interrupts for the channel. */ dma_write(0, CICR(lch)); @@ -798,6 +815,12 @@ void omap_free_dma(int lch) dma_write(0, CCR(lch)); omap_clear_dma(lch); } + + spin_lock_irqsave(&dma_chan_lock, flags); + dma_chan[lch].dev_id = -1; + dma_chan[lch].next_lch = -1; + dma_chan[lch].callback = NULL; + spin_unlock_irqrestore(&dma_chan_lock, flags); } EXPORT_SYMBOL(omap_free_dma); @@ -852,7 +875,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio, } l = dma_read(CCR(lch)); l &= ~((1 << 6) | (1 << 26)); - if (cpu_is_omap2430() || cpu_is_omap34xx()) + if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26); else l |= ((read_prio & 0x1) << 6); @@ -1200,7 +1223,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue) * Failure: -EINVAL/-ENOMEM */ int omap_request_dma_chain(int dev_id, const char *dev_name, - void (*callback) (int chain_id, u16 ch_status, + void (*callback) (int lch, u16 ch_status, void *data), int *chain_id, int no_of_chans, int chain_mode, struct omap_dma_channel_params params) @@ -1824,7 +1847,8 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id) #define omap1_dma_irq_handler NULL #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) static int omap2_dma_handle_ch(int ch) { @@ -2319,6 +2343,9 @@ static int __init omap_init_dma(void) } else if (cpu_is_omap34xx()) { omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE); dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; + } else if (cpu_is_omap44xx()) { + omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE); + dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else { pr_err("DMA init failed for unsupported omap\n"); return -ENODEV; @@ -2417,12 +2444,18 @@ static int __init omap_init_dma(void) } } - if (cpu_is_omap2430() || cpu_is_omap34xx()) + if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, DMA_DEFAULT_FIFO_DEPTH, 0); - if (cpu_class_is_omap2()) - setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq); + if (cpu_class_is_omap2()) { + int irq; + if (cpu_is_omap44xx()) + irq = INT_44XX_SDMA_IRQ0; + else + irq = INT_24XX_SDMA_IRQ0; + setup_irq(irq, &omap24xx_dma_irq); + } /* FIXME: Update LCD DMA to work on 24xx */ if (cpu_class_is_omap1()) { diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index bfd4757..7f50b61 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -7,6 +7,9 @@ * OMAP2 support by Juha Yrjola * API improvements and OMAP2 clock framework support by Timo Teras * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -150,7 +153,8 @@ struct omap_dm_timer { unsigned long phys_base; int irq; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) struct clk *iclk, *fclk; #endif void __iomem *io_base; @@ -169,6 +173,9 @@ struct omap_dm_timer { #define omap3_dm_timers NULL #define omap3_dm_source_names NULL #define omap3_dm_source_clocks NULL +#define omap4_dm_timers NULL +#define omap4_dm_source_names NULL +#define omap4_dm_source_clocks NULL static struct omap_dm_timer omap1_dm_timers[] = { { .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 }, @@ -191,6 +198,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap1_dm_timers); #define omap3_dm_timers NULL #define omap3_dm_source_names NULL #define omap3_dm_source_clocks NULL +#define omap4_dm_timers NULL +#define omap4_dm_source_names NULL +#define omap4_dm_source_clocks NULL static struct omap_dm_timer omap2_dm_timers[] = { { .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 }, @@ -214,7 +224,7 @@ static const char *omap2_dm_source_names[] __initdata = { NULL }; -static struct clk **omap2_dm_source_clocks[3]; +static struct clk *omap2_dm_source_clocks[3]; static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers); #elif defined(CONFIG_ARCH_OMAP3) @@ -225,6 +235,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers); #define omap2_dm_timers NULL #define omap2_dm_source_names NULL #define omap2_dm_source_clocks NULL +#define omap4_dm_timers NULL +#define omap4_dm_source_names NULL +#define omap4_dm_source_clocks NULL static struct omap_dm_timer omap3_dm_timers[] = { { .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 }, @@ -238,7 +251,7 @@ static struct omap_dm_timer omap3_dm_timers[] = { { .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 }, { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 }, { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 }, - { .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 }, + { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ }, }; static const char *omap3_dm_source_names[] __initdata = { @@ -247,9 +260,43 @@ static const char *omap3_dm_source_names[] __initdata = { NULL }; -static struct clk **omap3_dm_source_clocks[2]; +static struct clk *omap3_dm_source_clocks[2]; static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers); +#elif defined(CONFIG_ARCH_OMAP4) + +#define omap_dm_clk_enable(x) clk_enable(x) +#define omap_dm_clk_disable(x) clk_disable(x) +#define omap1_dm_timers NULL +#define omap2_dm_timers NULL +#define omap2_dm_source_names NULL +#define omap2_dm_source_clocks NULL +#define omap3_dm_timers NULL +#define omap3_dm_source_names NULL +#define omap3_dm_source_clocks NULL + +static struct omap_dm_timer omap4_dm_timers[] = { + { .phys_base = 0x4a318000, .irq = INT_44XX_GPTIMER1 }, + { .phys_base = 0x48032000, .irq = INT_44XX_GPTIMER2 }, + { .phys_base = 0x48034000, .irq = INT_44XX_GPTIMER3 }, + { .phys_base = 0x48036000, .irq = INT_44XX_GPTIMER4 }, + { .phys_base = 0x40138000, .irq = INT_44XX_GPTIMER5 }, + { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER6 }, + { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER7 }, + { .phys_base = 0x4013e000, .irq = INT_44XX_GPTIMER8 }, + { .phys_base = 0x4803e000, .irq = INT_44XX_GPTIMER9 }, + { .phys_base = 0x48086000, .irq = INT_44XX_GPTIMER10 }, + { .phys_base = 0x48088000, .irq = INT_44XX_GPTIMER11 }, + { .phys_base = 0x4a320000, .irq = INT_44XX_GPTIMER12 }, +}; +static const char *omap4_dm_source_names[] __initdata = { + "sys_ck", + "omap_32k_fck", + NULL +}; +static struct clk *omap4_dm_source_clocks[2]; +static const int dm_timer_count = ARRAY_SIZE(omap4_dm_timers); + #else #error OMAP architecture not supported! @@ -257,7 +304,7 @@ static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers); #endif static struct omap_dm_timer *dm_timers; -static char **dm_source_names; +static const char **dm_source_names; static struct clk **dm_source_clocks; static spinlock_t dm_timer_lock; @@ -321,11 +368,9 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer) l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ /* - * Enable wake-up only for GPT1 on OMAP2 CPUs. - * FIXME: All timers should have wake-up enabled and clear - * PRCM status. + * Enable wake-up on OMAP2 CPUs. */ - if (cpu_class_is_omap2() && (timer == &dm_timers[0])) + if (cpu_class_is_omap2()) l |= 1 << 2; omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l); @@ -461,7 +506,8 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask) } EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask); -#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3) +#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer) { @@ -511,7 +557,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop); #ifdef CONFIG_ARCH_OMAP1 -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { int n = (timer - dm_timers) << 1; u32 l; @@ -519,23 +565,31 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); l |= source << n; omap_writel(l, MOD_CONF_CTRL_1); + + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); #else -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { + int ret = -EINVAL; + if (source < 0 || source >= 3) - return; + return -EINVAL; clk_disable(timer->fclk); - clk_set_parent(timer->fclk, dm_source_clocks[source]); + ret = clk_set_parent(timer->fclk, dm_source_clocks[source]); clk_enable(timer->fclk); - /* When the functional clock disappears, too quick writes seem to - * cause an abort. */ + /* + * When the functional clock disappears, too quick writes seem + * to cause an abort. XXX Is this still necessary? + */ __delay(150000); + + return ret; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); @@ -699,12 +753,16 @@ int __init omap_dm_timer_init(void) dm_timers = omap1_dm_timers; else if (cpu_is_omap24xx()) { dm_timers = omap2_dm_timers; - dm_source_names = (char **)omap2_dm_source_names; - dm_source_clocks = (struct clk **)omap2_dm_source_clocks; + dm_source_names = omap2_dm_source_names; + dm_source_clocks = omap2_dm_source_clocks; } else if (cpu_is_omap34xx()) { dm_timers = omap3_dm_timers; - dm_source_names = (char **)omap3_dm_source_names; - dm_source_clocks = (struct clk **)omap3_dm_source_clocks; + dm_source_names = omap3_dm_source_names; + dm_source_clocks = omap3_dm_source_clocks; + } else if (cpu_is_omap44xx()) { + dm_timers = omap4_dm_timers; + dm_source_names = omap4_dm_source_names; + dm_source_clocks = omap4_dm_source_clocks; } if (cpu_class_is_omap2()) @@ -717,7 +775,8 @@ int __init omap_dm_timer_init(void) for (i = 0; i < dm_timer_count; i++) { timer = &dm_timers[i]; timer->io_base = IO_ADDRESS(timer->phys_base); -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) if (cpu_class_is_omap2()) { char clk_name[16]; sprintf(clk_name, "gpt%d_ick", i + 1); diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index ce6b4ba..3746222 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -206,9 +206,10 @@ void __init omapfb_reserve_sdram(void) config_invalid = 1; return; } - if (rg.paddr) + if (rg.paddr) { reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT); - reserved += rg.size; + reserved += rg.size; + } omapfb_config.mem_desc.region[i] = rg; configured_regions++; } diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index d3fa41e..7fd89ba 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -6,6 +6,9 @@ * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -146,6 +149,16 @@ #define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000) #define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000) +/* + * OMAP44XX specific GPIO registers + */ +#define OMAP44XX_GPIO1_BASE IO_ADDRESS(0x4a310000) +#define OMAP44XX_GPIO2_BASE IO_ADDRESS(0x48055000) +#define OMAP44XX_GPIO3_BASE IO_ADDRESS(0x48057000) +#define OMAP44XX_GPIO4_BASE IO_ADDRESS(0x48059000) +#define OMAP44XX_GPIO5_BASE IO_ADDRESS(0x4805B000) +#define OMAP44XX_GPIO6_BASE IO_ADDRESS(0x4805D000) + #define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE) struct gpio_bank { @@ -153,11 +166,13 @@ struct gpio_bank { u16 irq; u16 virtual_irq_start; int method; -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \ + defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4) u32 suspend_wakeup; u32 saved_wakeup; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) u32 non_wakeup_gpios; u32 enabled_non_wakeup_gpios; @@ -251,6 +266,24 @@ static struct gpio_bank gpio_bank_34xx[6] = { #endif +#ifdef CONFIG_ARCH_OMAP4 +static struct gpio_bank gpio_bank_44xx[6] = { + { OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, \ + METHOD_GPIO_24XX }, + { OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, \ + METHOD_GPIO_24XX }, + { OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, \ + METHOD_GPIO_24XX }, + { OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, \ + METHOD_GPIO_24XX }, + { OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \ + METHOD_GPIO_24XX }, + { OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \ + METHOD_GPIO_24XX }, +}; + +#endif + static struct gpio_bank *gpio_bank; static int gpio_bank_count; @@ -273,7 +306,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio) } if (cpu_is_omap24xx()) return &gpio_bank[gpio >> 5]; - if (cpu_is_omap34xx()) + if (cpu_is_omap34xx() || cpu_is_omap44xx()) return &gpio_bank[gpio >> 5]; BUG(); return NULL; @@ -285,7 +318,7 @@ static inline int get_gpio_index(int gpio) return gpio & 0x1f; if (cpu_is_omap24xx()) return gpio & 0x1f; - if (cpu_is_omap34xx()) + if (cpu_is_omap34xx() || cpu_is_omap44xx()) return gpio & 0x1f; return gpio & 0x0f; } @@ -307,7 +340,7 @@ static inline int gpio_valid(int gpio) return 0; if (cpu_is_omap24xx() && gpio < 128) return 0; - if (cpu_is_omap34xx() && gpio < 160) + if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192) return 0; return -1; } @@ -353,7 +386,8 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP850_GPIO_DIR_CONTROL; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; break; @@ -425,7 +459,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l &= ~(1 << gpio); break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETDATAOUT; @@ -476,7 +511,8 @@ static int __omap_get_gpio_datain(int gpio) reg += OMAP850_GPIO_DATA_INPUT; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_DATAIN; break; @@ -520,7 +556,7 @@ void omap_set_gpio_debounce(int gpio, int enable) else goto done; - if (cpu_is_omap34xx()) { + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { if (enable) clk_enable(bank->dbck); else @@ -550,7 +586,8 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time) } EXPORT_SYMBOL(omap_set_gpio_debounce_time); -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) { @@ -660,7 +697,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) goto bad; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: set_24xx_gpio_triggering(bank, gpio, trigger); break; @@ -745,7 +783,8 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP850_GPIO_INT_STATUS; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQSTATUS1; break; @@ -758,8 +797,12 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) /* Workaround for clearing DSP GPIO interrupts to allow retention */ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; if (cpu_is_omap24xx() || cpu_is_omap34xx()) - __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2); + __raw_writel(gpio_mask, reg); + + /* Flush posted write for the irq status to avoid spurious interrupts */ + __raw_readl(reg); #endif } @@ -810,7 +853,8 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) inv = 1; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQENABLE1; mask = 0xffffffff; @@ -883,7 +927,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l |= gpio_mask; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETIRQENABLE1; @@ -921,17 +966,15 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) case METHOD_MPUIO: case METHOD_GPIO_1610: spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: if (bank->non_wakeup_gpios & (1 << gpio)) { printk(KERN_ERR "Unable to modify wakeup on " @@ -940,13 +983,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) return -EINVAL; } spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif @@ -1019,7 +1059,8 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) __raw_writel(1 << offset, reg); } #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) if (bank->method == METHOD_GPIO_24XX) { /* Disable wake-up during idle for dynamic tick */ void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; @@ -1071,7 +1112,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_850) isr_reg = bank->base + OMAP850_GPIO_INT_STATUS; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) if (bank->method == METHOD_GPIO_24XX) isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; #endif @@ -1348,7 +1390,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset) /*---------------------------------------------------------------------*/ static int initialized; -#if !defined(CONFIG_ARCH_OMAP3) +#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)) static struct clk * gpio_ick; #endif @@ -1361,7 +1403,7 @@ static struct clk * gpio5_ick; static struct clk * gpio5_fck; #endif -#if defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS]; #endif @@ -1421,8 +1463,8 @@ static int __init _omap_gpio_init(void) } #endif -#if defined(CONFIG_ARCH_OMAP3) - if (cpu_is_omap34xx()) { +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { for (i = 0; i < OMAP34XX_NR_GPIOS; i++) { sprintf(clk_name, "gpio%d_ick", i + 1); gpio_iclks[i] = clk_get(NULL, clk_name); @@ -1499,6 +1541,17 @@ static int __init _omap_gpio_init(void) (rev >> 4) & 0x0f, rev & 0x0f); } #endif +#ifdef CONFIG_ARCH_OMAP4 + if (cpu_is_omap44xx()) { + int rev; + + gpio_bank_count = OMAP34XX_NR_GPIOS; + gpio_bank = gpio_bank_44xx; + rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n", + (rev >> 4) & 0x0f, rev & 0x0f); + } +#endif for (i = 0; i < gpio_bank_count; i++) { int j, gpio_count = 16; @@ -1522,7 +1575,8 @@ static int __init _omap_gpio_init(void) gpio_count = 32; /* 730 has 32-bit GPIOs */ } -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) if (bank->method == METHOD_GPIO_24XX) { static const u32 non_wakeup_gpios[] = { 0xe203ffc0, 0x08700040 @@ -1579,7 +1633,7 @@ static int __init _omap_gpio_init(void) set_irq_chained_handler(bank->irq, gpio_irq_handler); set_irq_data(bank->irq, bank); - if (cpu_is_omap34xx()) { + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { sprintf(clk_name, "gpio%d_dbck", i + 1); bank->dbck = clk_get(NULL, clk_name); if (IS_ERR(bank->dbck)) @@ -1601,7 +1655,8 @@ static int __init _omap_gpio_init(void) return 0; } -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \ + defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4) static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) { int i; @@ -1624,7 +1679,8 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN; wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; @@ -1665,7 +1721,8 @@ static int omap_gpio_resume(struct sys_device *dev) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; @@ -1697,7 +1754,8 @@ static struct sys_device omap_gpio_device = { #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) static int workaround_enabled; @@ -1713,7 +1771,8 @@ void omap2_gpio_prepare_for_retention(void) if (!(bank->enabled_non_wakeup_gpios)) continue; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); @@ -1722,7 +1781,8 @@ void omap2_gpio_prepare_for_retention(void) bank->saved_risingdetect = l2; l1 &= ~bank->enabled_non_wakeup_gpios; l2 &= ~bank->enabled_non_wakeup_gpios; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT); #endif @@ -1747,7 +1807,8 @@ void omap2_gpio_resume_after_retention(void) if (!(bank->enabled_non_wakeup_gpios)) continue; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) __raw_writel(bank->saved_fallingdetect, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(bank->saved_risingdetect, @@ -1757,14 +1818,16 @@ void omap2_gpio_resume_after_retention(void) * state. If so, generate an IRQ by software. This is * horribly racy, but it's the best we can do to work around * this silicon bug. */ -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); #endif l ^= bank->saved_datain; l &= bank->non_wakeup_gpios; if (l) { u32 old0, old1; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); __raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0); @@ -1800,7 +1863,8 @@ static int __init omap_gpio_sysinit(void) mpuio_init(); -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \ + defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4) if (cpu_is_omap16xx() || cpu_class_is_omap2()) { if (ret == 0) { ret = sysdev_class_register(&omap_gpio_sysclass); @@ -1889,7 +1953,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) irqstat = irq_desc[irq].status; #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \ - defined(CONFIG_ARCH_OMAP34XX) + defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4) if (is_in && ((bank->suspend_wakeup & mask) || irqstat & IRQ_TYPE_SENSE_MASK)) { char *trigger = NULL; diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index a303071..8b84839 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -5,7 +5,7 @@ * * Copyright (C) 2007 Nokia Corporation. * - * Contact: Jarkko Nikula <jarkko.nikula@nokia.com> + * Contact: Jarkko Nikula <jhnikula@gmail.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 073a2c5..f9f65e1 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -22,7 +22,8 @@ struct clkops { void (*disable)(struct clk *); }; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) struct clksel_rate { u32 val; @@ -51,7 +52,7 @@ struct dpll_data { u8 max_divider; u32 max_tolerance; u16 max_multiplier; -# if defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) u8 modes; void __iomem *autoidle_reg; void __iomem *idlest_reg; @@ -83,7 +84,8 @@ struct clk { void (*init)(struct clk *); __u8 enable_bit; __s8 usecount; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) u8 fixed_div; void __iomem *clksel_reg; u32 clksel_mask; @@ -119,7 +121,7 @@ struct clk_functions { extern unsigned int mpurate; extern int clk_init(struct clk_functions *custom_clocks); -extern void clk_init_one(struct clk *clk); +extern void clk_preinit(struct clk *clk); extern int clk_register(struct clk *clk); extern void clk_reparent(struct clk *child, struct clk *parent); extern void clk_unregister(struct clk *clk); diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h index 0ecf36d..fdeab42 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/mach/common.h @@ -33,8 +33,6 @@ struct sys_timer; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; -extern void omap_serial_init(void); -extern void omap_serial_enable_clocks(int enable); #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) extern int omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, @@ -62,6 +60,7 @@ struct omap_globals { void omap2_set_globals_242x(void); void omap2_set_globals_243x(void); void omap2_set_globals_343x(void); +void omap2_set_globals_443x(void); /* These get called from omap2_set_globals_xxxx(), do not call these */ void omap2_set_globals_tap(struct omap_globals *); diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h index 269147f..8140dbc 100644 --- a/arch/arm/plat-omap/include/mach/control.h +++ b/arch/arm/plat-omap/include/mach/control.h @@ -1,9 +1,9 @@ /* * arch/arm/plat-omap/include/mach/control.h * - * OMAP2/3 System Control Module definitions + * OMAP2/3/4 System Control Module definitions * - * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2009 Texas Instruments, Inc. * Copyright (C) 2007-2008 Nokia Corporation * * Written by Paul Walmsley @@ -144,6 +144,10 @@ #define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02b0) #define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4) +/* 34xx D2D idle-related pins, handled by PM core */ +#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 +#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254 + /* * REVISIT: This list of registers is not comprehensive - there are more * that should be added. @@ -189,8 +193,18 @@ #define OMAP2_PBIASLITEPWRDNZ0 (1 << 1) #define OMAP2_PBIASLITEVMODE0 (1 << 0) +/* CONTROL_IVA2_BOOTMOD bits */ +#define OMAP3_IVA2_BOOTMOD_SHIFT 0 +#define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0) +#define OMAP3_IVA2_BOOTMOD_IDLE (0x1 << 0) + +/* CONTROL_PADCONF_X bits */ +#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15) +#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14) + #ifndef __ASSEMBLY__ -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) extern void __iomem *omap_ctrl_base_get(void); extern u8 omap_ctrl_readb(u16 offset); extern u16 omap_ctrl_readw(u16 offset); diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index 98b1442..fc60c4e 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -5,8 +5,12 @@ * * Copyright (C) 2004, 2008 Nokia Corporation * + * Copyright (C) 2009 Texas Instruments. + * * Written by Tony Lindgren <tony.lindgren@nokia.com> * + * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -155,6 +159,8 @@ IS_OMAP_SUBCLASS(343x, 0x343) #define cpu_is_omap243x() 0 #define cpu_is_omap34xx() 0 #define cpu_is_omap343x() 0 +#define cpu_is_omap44xx() 0 +#define cpu_is_omap443x() 0 #if defined(MULTI_OMAP1) # if defined(CONFIG_ARCH_OMAP730) @@ -348,12 +354,21 @@ IS_OMAP_TYPE(3430, 0x3430) # define cpu_is_omap3430() is_omap3430() #endif +# if defined(CONFIG_ARCH_OMAP4) +# undef cpu_is_omap44xx +# undef cpu_is_omap443x +# define cpu_is_omap44xx() 1 +# define cpu_is_omap443x() 1 +# endif + /* Macros to detect if we have OMAP1 or OMAP2 */ #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) -#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx()) +#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ + cpu_is_omap44xx()) -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 @@ -370,6 +385,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP3430_REV_ES3_0 0x34303034 #define OMAP3430_REV_ES3_1 0x34304034 +#define OMAP443X_CLASS 0x44300034 + /* * omap_chip bits * diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S index 1b11f5c..ac24050 100644 --- a/arch/arm/plat-omap/include/mach/debug-macro.S +++ b/arch/arm/plat-omap/include/mach/debug-macro.S @@ -36,7 +36,7 @@ add \rx, \rx, #0x00004000 @ UART 3 #endif -#elif CONFIG_ARCH_OMAP3 +#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) moveq \rx, #0x48000000 @ physical base address movne \rx, #0xd8000000 @ virtual base orr \rx, \rx, #0x0006a000 diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h index 54fe966..8c1eae8 100644 --- a/arch/arm/plat-omap/include/mach/dma.h +++ b/arch/arm/plat-omap/include/mach/dma.h @@ -48,6 +48,7 @@ /* Hardware registers for omap2 and omap3 */ #define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000) #define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000) +#define OMAP44XX_DMA4_BASE (L4_44XX_BASE + 0x56000) #define OMAP_DMA4_REVISION 0x00 #define OMAP_DMA4_GCR 0x78 @@ -144,6 +145,7 @@ #define OMAP_DMA4_CSSA_U(n) 0 #define OMAP_DMA4_CDSA_L(n) 0 #define OMAP_DMA4_CDSA_U(n) 0 +#define OMAP1_DMA_COLOR(n) 0 /*----------------------------------------------------------------------------*/ @@ -531,7 +533,7 @@ extern int omap_get_dma_index(int lch, int *ei, int *fi); /* Chaining APIs */ #ifndef CONFIG_ARCH_OMAP1 extern int omap_request_dma_chain(int dev_id, const char *dev_name, - void (*callback) (int chain_id, u16 ch_status, + void (*callback) (int lch, u16 ch_status, void *data), int *chain_id, int no_of_chans, int chain_mode, diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h index 6dc70313..20f1054 100644 --- a/arch/arm/plat-omap/include/mach/dmtimer.h +++ b/arch/arm/plat-omap/include/mach/dmtimer.h @@ -64,7 +64,7 @@ void omap_dm_timer_trigger(struct omap_dm_timer *timer); void omap_dm_timer_start(struct omap_dm_timer *timer); void omap_dm_timer_stop(struct omap_dm_timer *timer); -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h deleted file mode 100644 index 9e62cf0..0000000 --- a/arch/arm/plat-omap/include/mach/eac.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach2/eac.h - * - * Defines for Enhanced Audio Controller - * - * Contact: Jarkko Nikula <jarkko.nikula@nokia.com> - * - * Copyright (C) 2006 Nokia Corporation - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H -#define __ASM_ARM_ARCH_OMAP2_EAC_H - -#include <mach/io.h> -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <sound/core.h> - -/* master codec clock source */ -#define EAC_MCLK_EXT_MASK 0x100 -enum eac_mclk_src { - EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */ - EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK, - EAC_MCLK_EXT_12288000, - EAC_MCLK_EXT_2x11289600, - EAC_MCLK_EXT_2x12288000, -}; - -/* codec port interface mode */ -enum eac_codec_mode { - EAC_CODEC_PCM, - EAC_CODEC_AC97, - EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */ - EAC_CODEC_I2S_SLAVE, -}; - -/* configuration structure for I2S mode */ -struct eac_i2s_conf { - /* if enabled, then first data slot (left channel) is signaled as - * positive level of frame sync EAC.AC_FS */ - unsigned polarity_changed_mode:1; - /* if enabled, then serial data starts one clock cycle after the - * of EAC.AC_FS for first audio slot */ - unsigned sync_delay_enable:1; -}; - -/* configuration structure for EAC codec port */ -struct eac_codec { - enum eac_mclk_src mclk_src; - - enum eac_codec_mode codec_mode; - union { - struct eac_i2s_conf i2s; - } codec_conf; - - int default_rate; /* audio sampling rate */ - - int (* set_power)(void *private_data, int dac, int adc); - int (* register_controls)(void *private_data, - struct snd_card *card); - const char *short_name; - - void *private_data; -}; - -/* structure for passing platform dependent data to the EAC driver */ -struct eac_platform_data { - int (* init)(struct device *eac_dev); - void (* cleanup)(struct device *eac_dev); - /* these callbacks are used to configure & control external MCLK - * source. NULL if not used */ - int (* enable_ext_clocks)(struct device *eac_dev); - void (* disable_ext_clocks)(struct device *eac_dev); -}; - -extern void omap_init_eac(struct eac_platform_data *pdata); - -extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec); -extern void eac_unregister_codec(struct device *eac_dev); - -extern int eac_set_mode(struct device *eac_dev, int play, int rec); - -#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */ diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index 2276f89..56426ed 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -3,6 +3,9 @@ * * Low-level IRQ helper macros for OMAP-based platforms * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. @@ -10,6 +13,7 @@ #include <mach/hardware.h> #include <mach/io.h> #include <mach/irqs.h> +#include <asm/hardware/gic.h> #if defined(CONFIG_ARCH_OMAP1) @@ -56,15 +60,21 @@ .endm #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) -#if defined(CONFIG_ARCH_OMAP24XX) #include <mach/omap24xx.h> -#endif -#if defined(CONFIG_ARCH_OMAP34XX) #include <mach/omap34xx.h> -#endif +/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */ +#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430) +#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) +#elif defined(CONFIG_ARCH_OMAP34XX) +#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE) +#endif +#if defined(CONFIG_ARCH_OMAP4) +#include <mach/omap44xx.h> +#endif #define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */ #define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */ @@ -77,6 +87,7 @@ .macro arch_ret_to_user, tmp1, tmp2 .endm +#ifndef CONFIG_ARCH_OMAP4 .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \base, =OMAP2_VA_IC_BASE ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */ @@ -92,6 +103,68 @@ and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */ .endm +#else + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an + * interrupt if it's between 30 and 1020. The test_for_ipi + * routine below will pick up on IPIs. + * A simple read from the controller will tell us the number + * of the highest priority enabled interrupt. + * We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =OMAP44XX_VA_GIC_CPU_BASE + ldr \irqstat, [\base, #GIC_CPU_INTACK] + + ldr \tmp, =1021 + + bic \irqnr, \irqstat, #0x1c00 + + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt + * on the controller, since this requires the original irqstat + * value which we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + it cc + strcc \irqstat, [\base, #GIC_CPU_EOI] + it cs + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + itt eq + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm +#endif .macro irq_prio_table .endm diff --git a/arch/arm/plat-omap/include/mach/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h deleted file mode 100644 index 90444a0..0000000 --- a/arch/arm/plat-omap/include/mach/gpioexpander.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpioexpander.h - * - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This package is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H -#define __ASM_ARCH_OMAP_GPIOEXPANDER_H - -/* Function Prototypes for GPIO Expander functions */ - -#ifdef CONFIG_GPIOEXPANDER_OMAP -int read_gpio_expa(u8 *, int); -int write_gpio_expa(u8 , int); -#else -static inline int read_gpio_expa(u8 *val, int addr) -{ - return 0; -} -static inline int write_gpio_expa(u8 val, int addr) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */ diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h new file mode 100644 index 0000000..b64fbee --- /dev/null +++ b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h @@ -0,0 +1,42 @@ +/* + * arch/arm/plat-omap/include/mach/gpmc-smc91x.h + * + * Copyright (C) 2009 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__ + +#define GPMC_TIMINGS_SMC91C96 (1 << 4) +#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */ +#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */ +#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */ + +struct omap_smc91x_platform_data { + int cs; + int gpio_irq; + int gpio_pwrdwn; + int gpio_reset; + int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */ + u32 flags; + int (*retime)(void); +}; + +#if defined(CONFIG_SMC91X) || \ + defined(CONFIG_SMC91X_MODULE) + +extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d); + +#else + +#define board_smc91x_data NULL + +static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d) +{ +} + +#endif +#endif diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h index 3dc423e..26c1fbf 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -285,5 +285,6 @@ #include "omap16xx.h" #include "omap24xx.h" #include "omap34xx.h" +#include "omap44xx.h" #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h index 577f492..886248d 100644 --- a/arch/arm/plat-omap/include/mach/hwa742.h +++ b/arch/arm/plat-omap/include/mach/hwa742.h @@ -2,10 +2,6 @@ #define _HWA742_H struct hwa742_platform_data { - void (*power_up)(struct device *dev); - void (*power_down)(struct device *dev); - unsigned long (*get_clock_rate)(struct device *dev); - unsigned te_connected:1; }; diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 0610d7e..3b28147 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -6,6 +6,9 @@ * Copied from arch/arm/mach-sa1100/include/mach/io.h * Copyright (C) 1997-1999 Russell King * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -157,6 +160,40 @@ #define DSP_MMU_34XX_VIRT 0xe2000000 #define DSP_MMU_34XX_SIZE SZ_4K + +#elif defined(CONFIG_ARCH_OMAP4) +/* We map both L3 and L4 on OMAP4 */ +#define L3_44XX_PHYS L3_44XX_BASE +#define L3_44XX_VIRT 0xd4000000 +#define L3_44XX_SIZE SZ_1M + +#define L4_44XX_PHYS L4_44XX_BASE +#define L4_44XX_VIRT 0xda000000 +#define L4_44XX_SIZE SZ_4M + + +#define L4_WK_44XX_PHYS L4_WK_44XX_BASE +#define L4_WK_44XX_VIRT 0xda300000 +#define L4_WK_44XX_SIZE SZ_1M + +#define L4_PER_44XX_PHYS L4_PER_44XX_BASE +#define L4_PER_44XX_VIRT 0xd8000000 +#define L4_PER_44XX_SIZE SZ_4M + +#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE +#define L4_EMU_44XX_VIRT 0xe4000000 +#define L4_EMU_44XX_SIZE SZ_64M + +#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE +#define OMAP44XX_GPMC_VIRT 0xe0000000 +#define OMAP44XX_GPMC_SIZE SZ_1M + + +#define IO_OFFSET 0x90000000 +#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */ + #endif #define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa)) diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/mach/iommu.h new file mode 100644 index 0000000..769b00b --- /dev/null +++ b/arch/arm/plat-omap/include/mach/iommu.h @@ -0,0 +1,168 @@ +/* + * omap iommu: main structures + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_IOMMU_H +#define __MACH_IOMMU_H + +struct iotlb_entry { + u32 da; + u32 pa; + u32 pgsz, prsvd, valid; + union { + u16 ap; + struct { + u32 endian, elsz, mixed; + }; + }; +}; + +struct iommu { + const char *name; + struct module *owner; + struct clk *clk; + void __iomem *regbase; + struct device *dev; + + unsigned int refcount; + struct mutex iommu_lock; /* global for this whole object */ + + /* + * We don't change iopgd for a situation like pgd for a task, + * but share it globally for each iommu. + */ + u32 *iopgd; + spinlock_t page_table_lock; /* protect iopgd */ + + int nr_tlb_entries; + + struct list_head mmap; + struct mutex mmap_lock; /* protect mmap */ + + int (*isr)(struct iommu *obj); + + void *ctx; /* iommu context: registres saved area */ +}; + +struct cr_regs { + union { + struct { + u16 cam_l; + u16 cam_h; + }; + u32 cam; + }; + union { + struct { + u16 ram_l; + u16 ram_h; + }; + u32 ram; + }; +}; + +struct iotlb_lock { + short base; + short vict; +}; + +/* architecture specific functions */ +struct iommu_functions { + unsigned long version; + + int (*enable)(struct iommu *obj); + void (*disable)(struct iommu *obj); + u32 (*fault_isr)(struct iommu *obj, u32 *ra); + + void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr); + void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr); + + struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e); + int (*cr_valid)(struct cr_regs *cr); + u32 (*cr_to_virt)(struct cr_regs *cr); + void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e); + ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf); + + u32 (*get_pte_attr)(struct iotlb_entry *e); + + void (*save_ctx)(struct iommu *obj); + void (*restore_ctx)(struct iommu *obj); + ssize_t (*dump_ctx)(struct iommu *obj, char *buf); +}; + +struct iommu_platform_data { + const char *name; + const char *clk_name; + const int nr_tlb_entries; +}; + +#if defined(CONFIG_ARCH_OMAP1) +#error "iommu for this processor not implemented yet" +#else +#include <mach/iommu2.h> +#endif + +/* + * utilities for super page(16MB, 1MB, 64KB and 4KB) + */ + +#define iopgsz_max(bytes) \ + (((bytes) >= SZ_16M) ? SZ_16M : \ + ((bytes) >= SZ_1M) ? SZ_1M : \ + ((bytes) >= SZ_64K) ? SZ_64K : \ + ((bytes) >= SZ_4K) ? SZ_4K : 0) + +#define bytes_to_iopgsz(bytes) \ + (((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M : \ + ((bytes) == SZ_1M) ? MMU_CAM_PGSZ_1M : \ + ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K : \ + ((bytes) == SZ_4K) ? MMU_CAM_PGSZ_4K : -1) + +#define iopgsz_to_bytes(iopgsz) \ + (((iopgsz) == MMU_CAM_PGSZ_16M) ? SZ_16M : \ + ((iopgsz) == MMU_CAM_PGSZ_1M) ? SZ_1M : \ + ((iopgsz) == MMU_CAM_PGSZ_64K) ? SZ_64K : \ + ((iopgsz) == MMU_CAM_PGSZ_4K) ? SZ_4K : 0) + +#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0) + +/* + * global functions + */ +extern u32 iommu_arch_version(void); + +extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e); +extern u32 iotlb_cr_to_virt(struct cr_regs *cr); + +extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e); +extern void flush_iotlb_page(struct iommu *obj, u32 da); +extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end); +extern void flush_iotlb_all(struct iommu *obj); + +extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e); +extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova); + +extern struct iommu *iommu_get(const char *name); +extern void iommu_put(struct iommu *obj); + +extern void iommu_save_ctx(struct iommu *obj); +extern void iommu_restore_ctx(struct iommu *obj); + +extern int install_iommu_arch(const struct iommu_functions *ops); +extern void uninstall_iommu_arch(const struct iommu_functions *ops); + +extern int foreach_iommu_device(void *data, + int (*fn)(struct device *, void *)); + +extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf); +extern size_t dump_tlb_entries(struct iommu *obj, char *buf); + +#endif /* __MACH_IOMMU_H */ diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/mach/iommu2.h new file mode 100644 index 0000000..10ad05f --- /dev/null +++ b/arch/arm/plat-omap/include/mach/iommu2.h @@ -0,0 +1,96 @@ +/* + * omap iommu: omap2 architecture specific definitions + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_IOMMU2_H +#define __MACH_IOMMU2_H + +#include <linux/io.h> + +/* + * MMU Register offsets + */ +#define MMU_REVISION 0x00 +#define MMU_SYSCONFIG 0x10 +#define MMU_SYSSTATUS 0x14 +#define MMU_IRQSTATUS 0x18 +#define MMU_IRQENABLE 0x1c +#define MMU_WALKING_ST 0x40 +#define MMU_CNTL 0x44 +#define MMU_FAULT_AD 0x48 +#define MMU_TTB 0x4c +#define MMU_LOCK 0x50 +#define MMU_LD_TLB 0x54 +#define MMU_CAM 0x58 +#define MMU_RAM 0x5c +#define MMU_GFLUSH 0x60 +#define MMU_FLUSH_ENTRY 0x64 +#define MMU_READ_CAM 0x68 +#define MMU_READ_RAM 0x6c +#define MMU_EMU_FAULT_AD 0x70 + +#define MMU_REG_SIZE 256 + +/* + * MMU Register bit definitions + */ +#define MMU_LOCK_BASE_SHIFT 10 +#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT) +#define MMU_LOCK_BASE(x) \ + ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT) + +#define MMU_LOCK_VICT_SHIFT 4 +#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT) +#define MMU_LOCK_VICT(x) \ + ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT) + +#define MMU_CAM_VATAG_SHIFT 12 +#define MMU_CAM_VATAG_MASK \ + ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT) +#define MMU_CAM_P (1 << 3) +#define MMU_CAM_V (1 << 2) +#define MMU_CAM_PGSZ_MASK 3 +#define MMU_CAM_PGSZ_1M (0 << 0) +#define MMU_CAM_PGSZ_64K (1 << 0) +#define MMU_CAM_PGSZ_4K (2 << 0) +#define MMU_CAM_PGSZ_16M (3 << 0) + +#define MMU_RAM_PADDR_SHIFT 12 +#define MMU_RAM_PADDR_MASK \ + ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT) +#define MMU_RAM_ENDIAN_SHIFT 9 +#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT) +#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT) +#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT) +#define MMU_RAM_ELSZ_SHIFT 7 +#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT) +#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT) +#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT) +#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT) +#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT) +#define MMU_RAM_MIXED_SHIFT 6 +#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT) +#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK + +/* + * register accessors + */ +static inline u32 iommu_read_reg(struct iommu *obj, size_t offs) +{ + return __raw_readl(obj->regbase + offs); +} + +static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs) +{ + __raw_writel(val, obj->regbase + offs); +} + +#endif /* __MACH_IOMMU2_H */ diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/mach/iovmm.h new file mode 100644 index 0000000..bdc7ce5 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/iovmm.h @@ -0,0 +1,94 @@ +/* + * omap iommu: simple virtual address space management + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __IOMMU_MMAP_H +#define __IOMMU_MMAP_H + +struct iovm_struct { + struct iommu *iommu; /* iommu object which this belongs to */ + u32 da_start; /* area definition */ + u32 da_end; + u32 flags; /* IOVMF_: see below */ + struct list_head list; /* linked in ascending order */ + const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */ + void *va; /* mpu side mapped address */ +}; + +/* + * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma) + * + * lower 16 bit is used for h/w and upper 16 bit is for s/w. + */ +#define IOVMF_SW_SHIFT 16 +#define IOVMF_HW_SIZE (1 << IOVMF_SW_SHIFT) +#define IOVMF_HW_MASK (IOVMF_HW_SIZE - 1) +#define IOVMF_SW_MASK (~IOVMF_HW_MASK)UL + +/* + * iovma: h/w flags derived from cam and ram attribute + */ +#define IOVMF_CAM_MASK (~((1 << 10) - 1)) +#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK) + +#define IOVMF_PGSZ_MASK (3 << 0) +#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M +#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K +#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K +#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M + +#define IOVMF_ENDIAN_MASK (1 << 9) +#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG +#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE + +#define IOVMF_ELSZ_MASK (3 << 7) +#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8 +#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16 +#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32 +#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE + +#define IOVMF_MIXED_MASK (1 << 6) +#define IOVMF_MIXED MMU_RAM_MIXED + +/* + * iovma: s/w flags, used for mapping and umapping internally. + */ +#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT) +#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT) +#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT) + +/* "superpages" is supported just with physically linear pages */ +#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT)) +#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT)) +#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT)) + +#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT)) +#define IOVMF_DA_ANON (2 << (4 + IOVMF_SW_SHIFT)) +#define IOVMF_DA_MASK (3 << (4 + IOVMF_SW_SHIFT)) + + +extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da); +extern u32 iommu_vmap(struct iommu *obj, u32 da, + const struct sg_table *sgt, u32 flags); +extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da); +extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, + u32 flags); +extern void iommu_vfree(struct iommu *obj, const u32 da); +extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes, + u32 flags); +extern void iommu_kunmap(struct iommu *obj, u32 da); +extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, + u32 flags); +extern void iommu_kfree(struct iommu *obj, u32 da); + +extern void *da_to_va(struct iommu *obj, u32 da); + +#endif /* __IOMMU_MMAP_H */ diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h index 8372a00..40f6033 100644 --- a/arch/arm/plat-omap/include/mach/irda.h +++ b/arch/arm/plat-omap/include/mach/irda.h @@ -21,10 +21,6 @@ struct omap_irda_config { int transceiver_cap; int (*transceiver_mode)(struct device *dev, int mode); int (*select_irda)(struct device *dev, int state); - /* Very specific to the needs of some platforms (h3,h4) - * having calls which can sleep in irda_set_speed. - */ - struct delayed_work gpio_expa; int rx_channel; int tx_channel; unsigned long dest_start; diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index 7f57ee6..fb7cb77 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -4,6 +4,9 @@ * Copyright (C) Greg Lonnon 2001 * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -422,6 +425,94 @@ #define INT_34XX_BENCH_MPU_EMUL 3 + +#define IRQ_GIC_START 32 +#define INT_44XX_LOCALTIMER_IRQ 29 +#define INT_44XX_LOCALWDT_IRQ 30 + +#define INT_44XX_BENCH_MPU_EMUL (3 + IRQ_GIC_START) +#define INT_44XX_SSM_ABORT_IRQ (6 + IRQ_GIC_START) +#define INT_44XX_SYS_NIRQ (7 + IRQ_GIC_START) +#define INT_44XX_D2D_FW_IRQ (8 + IRQ_GIC_START) +#define INT_44XX_PRCM_MPU_IRQ (11 + IRQ_GIC_START) +#define INT_44XX_SDMA_IRQ0 (12 + IRQ_GIC_START) +#define INT_44XX_SDMA_IRQ1 (13 + IRQ_GIC_START) +#define INT_44XX_SDMA_IRQ2 (14 + IRQ_GIC_START) +#define INT_44XX_SDMA_IRQ3 (15 + IRQ_GIC_START) +#define INT_44XX_ISS_IRQ (24 + IRQ_GIC_START) +#define INT_44XX_DSS_IRQ (25 + IRQ_GIC_START) +#define INT_44XX_MAIL_U0_MPU (26 + IRQ_GIC_START) +#define INT_44XX_DSP_MMU (28 + IRQ_GIC_START) +#define INT_44XX_GPTIMER1 (37 + IRQ_GIC_START) +#define INT_44XX_GPTIMER2 (38 + IRQ_GIC_START) +#define INT_44XX_GPTIMER3 (39 + IRQ_GIC_START) +#define INT_44XX_GPTIMER4 (40 + IRQ_GIC_START) +#define INT_44XX_GPTIMER5 (41 + IRQ_GIC_START) +#define INT_44XX_GPTIMER6 (42 + IRQ_GIC_START) +#define INT_44XX_GPTIMER7 (43 + IRQ_GIC_START) +#define INT_44XX_GPTIMER8 (44 + IRQ_GIC_START) +#define INT_44XX_GPTIMER9 (45 + IRQ_GIC_START) +#define INT_44XX_GPTIMER10 (46 + IRQ_GIC_START) +#define INT_44XX_GPTIMER11 (47 + IRQ_GIC_START) +#define INT_44XX_GPTIMER12 (95 + IRQ_GIC_START) +#define INT_44XX_SHA1MD5 (51 + IRQ_GIC_START) +#define INT_44XX_I2C1_IRQ (56 + IRQ_GIC_START) +#define INT_44XX_I2C2_IRQ (57 + IRQ_GIC_START) +#define INT_44XX_HDQ_IRQ (58 + IRQ_GIC_START) +#define INT_44XX_SPI1_IRQ (65 + IRQ_GIC_START) +#define INT_44XX_SPI2_IRQ (66 + IRQ_GIC_START) +#define INT_44XX_HSI_1_IRQ0 (67 + IRQ_GIC_START) +#define INT_44XX_HSI_2_IRQ1 (68 + IRQ_GIC_START) +#define INT_44XX_HSI_1_DMAIRQ (71 + IRQ_GIC_START) +#define INT_44XX_UART1_IRQ (72 + IRQ_GIC_START) +#define INT_44XX_UART2_IRQ (73 + IRQ_GIC_START) +#define INT_44XX_UART3_IRQ (74 + IRQ_GIC_START) +#define INT_44XX_UART4_IRQ (70 + IRQ_GIC_START) +#define INT_44XX_USB_IRQ_NISO (76 + IRQ_GIC_START) +#define INT_44XX_USB_IRQ_ISO (77 + IRQ_GIC_START) +#define INT_44XX_USB_IRQ_HGEN (78 + IRQ_GIC_START) +#define INT_44XX_USB_IRQ_HSOF (79 + IRQ_GIC_START) +#define INT_44XX_USB_IRQ_OTG (80 + IRQ_GIC_START) +#define INT_44XX_MCBSP4_IRQ_TX (81 + IRQ_GIC_START) +#define INT_44XX_MCBSP4_IRQ_RX (82 + IRQ_GIC_START) +#define INT_44XX_MMC_IRQ (83 + IRQ_GIC_START) +#define INT_44XX_MMC2_IRQ (86 + IRQ_GIC_START) +#define INT_44XX_MCBSP2_IRQ_TX (89 + IRQ_GIC_START) +#define INT_44XX_MCBSP2_IRQ_RX (90 + IRQ_GIC_START) +#define INT_44XX_SPI3_IRQ (91 + IRQ_GIC_START) +#define INT_44XX_SPI5_IRQ (69 + IRQ_GIC_START) + +#define INT_44XX_MCBSP5_IRQ (16 + IRQ_GIC_START) +#define INT_44xX_MCBSP1_IRQ (17 + IRQ_GIC_START) +#define INT_44XX_MCBSP2_IRQ (22 + IRQ_GIC_START) +#define INT_44XX_MCBSP3_IRQ (23 + IRQ_GIC_START) +#define INT_44XX_MCBSP4_IRQ (27 + IRQ_GIC_START) +#define INT_44XX_HS_USB_MC (92 + IRQ_GIC_START) +#define INT_44XX_HS_USB_DMA (93 + IRQ_GIC_START) + +#define INT_44XX_GPIO_BANK1 (29 + IRQ_GIC_START) +#define INT_44XX_GPIO_BANK2 (30 + IRQ_GIC_START) +#define INT_44XX_GPIO_BANK3 (31 + IRQ_GIC_START) +#define INT_44XX_GPIO_BANK4 (32 + IRQ_GIC_START) +#define INT_44XX_GPIO_BANK5 (33 + IRQ_GIC_START) +#define INT_44XX_GPIO_BANK6 (34 + IRQ_GIC_START) +#define INT_44XX_USIM_IRQ (35 + IRQ_GIC_START) +#define INT_44XX_WDT3_IRQ (36 + IRQ_GIC_START) +#define INT_44XX_SPI4_IRQ (48 + IRQ_GIC_START) +#define INT_44XX_SHA1MD52_IRQ (49 + IRQ_GIC_START) +#define INT_44XX_FPKA_READY_IRQ (50 + IRQ_GIC_START) +#define INT_44XX_SHA1MD51_IRQ (51 + IRQ_GIC_START) +#define INT_44XX_RNG_IRQ (52 + IRQ_GIC_START) +#define INT_44XX_I2C3_IRQ (61 + IRQ_GIC_START) +#define INT_44XX_FPKA_ERROR_IRQ (64 + IRQ_GIC_START) +#define INT_44XX_PBIAS_IRQ (75 + IRQ_GIC_START) +#define INT_44XX_OHCI_IRQ (76 + IRQ_GIC_START) +#define INT_44XX_EHCI_IRQ (77 + IRQ_GIC_START) +#define INT_44XX_TLL_IRQ (78 + IRQ_GIC_START) +#define INT_44XX_PARTHASH_IRQ (79 + IRQ_GIC_START) +#define INT_44XX_MMC3_IRQ (94 + IRQ_GIC_START) + + /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and * 16 MPUIO lines */ #define OMAP_MAX_GPIO_LINES 192 @@ -467,6 +558,7 @@ #ifndef __ASSEMBLY__ extern void omap_init_irq(void); +extern int omap_irq_pending(void); #endif #include <mach/hardware.h> diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h index 232923a..45ea3ae 100644 --- a/arch/arm/plat-omap/include/mach/keypad.h +++ b/arch/arm/plat-omap/include/mach/keypad.h @@ -33,7 +33,11 @@ struct omap_kp_platform_data { #define GROUP_3 (3 << 16) #define GROUP_MASK GROUP_3 +#define KEY_PERSISTENT 0x00800000 +#define KEYNUM_MASK 0x00EFFFFF #define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val)) +#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \ + KEY_PERSISTENT) #endif diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h index 99ed564..9ad41dc 100644 --- a/arch/arm/plat-omap/include/mach/memory.h +++ b/arch/arm/plat-omap/include/mach/memory.h @@ -38,7 +38,8 @@ */ #if defined(CONFIG_ARCH_OMAP1) #define PHYS_OFFSET UL(0x10000000) -#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) #define PHYS_OFFSET UL(0x80000000) #endif diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h index 4435bd4..81d5b36 100644 --- a/arch/arm/plat-omap/include/mach/mmc.h +++ b/arch/arm/plat-omap/include/mach/mmc.h @@ -79,7 +79,6 @@ struct omap_mmc_platform_data { /* use the internal clock */ unsigned internal_clock:1; - s16 power_pin; int switch_pin; /* gpio (card detect) */ int gpio_wp; /* gpio (write protect) */ diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h index 24335d4..696edfc 100644 --- a/arch/arm/plat-omap/include/mach/omap24xx.h +++ b/arch/arm/plat-omap/include/mach/omap24xx.h @@ -85,23 +85,5 @@ #define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000) #define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000) -#if defined(CONFIG_ARCH_OMAP2420) - -#define OMAP2_32KSYNCT_BASE OMAP2420_32KSYNCT_BASE -#define OMAP2_PRCM_BASE OMAP2420_PRCM_BASE -#define OMAP2_CM_BASE OMAP2420_CM_BASE -#define OMAP2_PRM_BASE OMAP2420_PRM_BASE -#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) - -#elif defined(CONFIG_ARCH_OMAP2430) - -#define OMAP2_32KSYNCT_BASE OMAP2430_32KSYNCT_BASE -#define OMAP2_PRCM_BASE OMAP2430_PRCM_BASE -#define OMAP2_CM_BASE OMAP2430_CM_BASE -#define OMAP2_PRM_BASE OMAP2430_PRM_BASE -#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) - -#endif - #endif /* __ASM_ARCH_OMAP24XX_H */ diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h index ab64015..f8d186a 100644 --- a/arch/arm/plat-omap/include/mach/omap34xx.h +++ b/arch/arm/plat-omap/include/mach/omap34xx.h @@ -31,13 +31,9 @@ #define L4_34XX_BASE 0x48000000 #define L4_WK_34XX_BASE 0x48300000 -#define L4_WK_OMAP_BASE L4_WK_34XX_BASE #define L4_PER_34XX_BASE 0x49000000 -#define L4_PER_OMAP_BASE L4_PER_34XX_BASE #define L4_EMU_34XX_BASE 0x54000000 -#define L4_EMU_BASE L4_EMU_34XX_BASE #define L3_34XX_BASE 0x68000000 -#define L3_OMAP_BASE L3_34XX_BASE #define OMAP3430_32KSYNCT_BASE 0x48320000 #define OMAP3430_CM_BASE 0x48004800 @@ -83,15 +79,6 @@ #define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000) -#if defined(CONFIG_ARCH_OMAP3430) - -#define OMAP2_32KSYNCT_BASE OMAP3430_32KSYNCT_BASE -#define OMAP2_CM_BASE OMAP3430_CM_BASE -#define OMAP2_PRM_BASE OMAP3430_PRM_BASE -#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE) - -#endif - #define OMAP34XX_DSP_BASE 0x58000000 #define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0) #define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000) diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h new file mode 100644 index 0000000..15dec7f --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap44xx.h @@ -0,0 +1,46 @@ +/*: + * Address mappings and base address for OMAP4 interconnects + * and peripherals. + * + * Copyright (C) 2009 Texas Instruments + * + * Author: Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_OMAP44XX_H +#define __ASM_ARCH_OMAP44XX_H + +/* + * Please place only base defines here and put the rest in device + * specific headers. + */ +#define L4_44XX_BASE 0x4a000000 +#define L4_WK_44XX_BASE 0x4a300000 +#define L4_PER_44XX_BASE 0x48000000 +#define L4_EMU_44XX_BASE 0x54000000 +#define L3_44XX_BASE 0x44000000 +#define OMAP4430_32KSYNCT_BASE 0x4a304000 +#define OMAP4430_CM_BASE 0x4a004000 +#define OMAP4430_PRM_BASE 0x48306000 +#define OMAP44XX_GPMC_BASE 0x50000000 +#define OMAP443X_SCM_BASE 0x4a002000 +#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE +#define OMAP44XX_IC_BASE 0x48200000 +#define OMAP44XX_IVA_INTC_BASE 0x40000000 +#define IRQ_SIR_IRQ 0x0040 +#define OMAP44XX_GIC_DIST_BASE 0x48241000 +#define OMAP44XX_GIC_CPU_BASE 0x48240100 +#define OMAP44XX_VA_GIC_CPU_BASE IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) +#define OMAP44XX_SCU_BASE 0x48240000 +#define OMAP44XX_VA_SCU_BASE IO_ADDRESS(OMAP44XX_SCU_BASE) +#define OMAP44XX_LOCAL_TWD_BASE 0x48240600 +#define OMAP44XX_VA_LOCAL_TWD_BASE IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE) +#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100 +#define OMAP44XX_WKUPGEN_BASE 0x48281000 +#define OMAP44XX_VA_WKUPGEN_BASE IO_ADDRESS(OMAP44XX_WKUPGEN_BASE) + +#endif /* __ASM_ARCH_OMAP44XX_H */ + diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h index 4649d30..72f433d 100644 --- a/arch/arm/plat-omap/include/mach/onenand.h +++ b/arch/arm/plat-omap/include/mach/onenand.h @@ -9,8 +9,12 @@ * published by the Free Software Foundation. */ +#include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#define ONENAND_SYNC_READ (1 << 0) +#define ONENAND_SYNC_READWRITE (1 << 1) + struct omap_onenand_platform_data { int cs; int gpio_irq; @@ -18,8 +22,22 @@ struct omap_onenand_platform_data { int nr_parts; int (*onenand_setup)(void __iomem *, int freq); int dma_channel; + u8 flags; }; -int omap2_onenand_rephase(void); - #define ONENAND_MAX_PARTITIONS 8 + +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) + +extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); + +#else + +#define board_onenand_data NULL + +static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) +{ +} + +#endif diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h index 8a676a0..13abd02 100644 --- a/arch/arm/plat-omap/include/mach/serial.h +++ b/arch/arm/plat-omap/include/mach/serial.h @@ -1,5 +1,8 @@ /* - * arch/arm/plat-omap/include/mach/serial.h + * arch/arm/plat-omap/include/mach/serial.h + * + * Copyright (C) 2009 Texas Instruments + * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -15,19 +18,28 @@ #define OMAP_UART1_BASE 0xfffb0000 #define OMAP_UART2_BASE 0xfffb0800 #define OMAP_UART3_BASE 0xfffb9800 +#define OMAP_MAX_NR_PORTS 3 #elif defined(CONFIG_ARCH_OMAP2) /* OMAP2 serial ports */ #define OMAP_UART1_BASE 0x4806a000 #define OMAP_UART2_BASE 0x4806c000 #define OMAP_UART3_BASE 0x4806e000 +#define OMAP_MAX_NR_PORTS 3 #elif defined(CONFIG_ARCH_OMAP3) /* OMAP3 serial ports */ #define OMAP_UART1_BASE 0x4806a000 #define OMAP_UART2_BASE 0x4806c000 #define OMAP_UART3_BASE 0x49020000 +#define OMAP_MAX_NR_PORTS 3 +#elif defined(CONFIG_ARCH_OMAP4) +/* OMAP4 serial ports */ +#define OMAP_UART1_BASE 0x4806a000 +#define OMAP_UART2_BASE 0x4806c000 +#define OMAP_UART3_BASE 0x48020000 +#define OMAP_UART4_BASE 0x4806e000 +#define OMAP_MAX_NR_PORTS 4 #endif -#define OMAP_MAX_NR_PORTS 3 #define OMAP1510_BASE_BAUD (12000000/16) #define OMAP16XX_BASE_BAUD (48000000/16) #define OMAP24XX_BASE_BAUD (48000000/16) @@ -40,4 +52,13 @@ __ret; \ }) +#ifndef __ASSEMBLER__ +extern void omap_serial_init(void); +extern int omap_uart_can_sleep(void); +extern void omap_uart_check_wakeup(void); +extern void omap_uart_prepare_suspend(void); +extern void omap_uart_prepare_idle(int num); +extern void omap_uart_resume_idle(int num); +#endif + #endif diff --git a/arch/arm/plat-omap/include/mach/smp.h b/arch/arm/plat-omap/include/mach/smp.h new file mode 100644 index 0000000..dcaa8fd --- /dev/null +++ b/arch/arm/plat-omap/include/mach/smp.h @@ -0,0 +1,51 @@ +/* + * OMAP4 machine specific smp.h + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Author: + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Interface functions needed for the SMP. This file is based on arm + * realview smp platform. + * Copyright (c) 2003 ARM Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef OMAP_ARCH_SMP_H +#define OMAP_ARCH_SMP_H + +#include <asm/hardware/gic.h> + +/* + * set_event() is used to wake up secondary core from wfe using sev. ROM + * code puts the second core into wfe(standby). + * + */ +#define set_event() __asm__ __volatile__ ("sev" : : : "memory") + +/* Needed for secondary core boot */ +extern void omap_secondary_startup(void); + +/* + * We use Soft IRQ1 as the IPI + */ +static inline void smp_cross_call(const struct cpumask *mask) +{ + gic_raise_softirq(mask, 1); +} + +/* + * Read MPIDR: Multiprocessor affinity register + */ +#define hard_smp_processor_id() \ + ({ \ + unsigned int cpunum; \ + __asm__("mrc p15, 0, %0, c0, c0, 5" \ + : "=r" (cpunum)); \ + cpunum &= 0x0F; \ + }) + +#endif diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h index ab35d62..dca7c16 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -23,7 +23,8 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2); + u32 sdrc_actim_ctrlb, u32 m2, + u32 unlock_dll); /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); @@ -60,7 +61,8 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz; extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2); + u32 sdrc_actim_ctrlb, u32 m2, + u32 unlock_dll); extern unsigned long omap3_sram_configure_core_dpll_sz; #endif diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/mach/timer-gp.h new file mode 100644 index 0000000..c88d346 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/timer-gp.h @@ -0,0 +1,17 @@ +/* + * OMAP2/3 GPTIMER support.headers + * + * Copyright (C) 2009 Nokia Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H + +int __init omap2_gp_clockevent_set_gptimer(u8 id); + +#endif + diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h index 69f0cee..f337e17 100644 --- a/arch/arm/plat-omap/include/mach/usb.h +++ b/arch/arm/plat-omap/include/mach/usb.h @@ -27,13 +27,7 @@ #define UDC_BASE OMAP2_UDC_BASE #define OMAP_OHCI_BASE OMAP2_OHCI_BASE -#ifdef CONFIG_USB_MUSB_SOC extern void usb_musb_init(void); -#else -static inline void usb_musb_init(void) -{ -} -#endif #endif diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h index dc104cd..b97dfaf 100644 --- a/arch/arm/plat-omap/include/mach/vmalloc.h +++ b/arch/arm/plat-omap/include/mach/vmalloc.h @@ -17,5 +17,5 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END (PAGE_OFFSET + 0x18000000) diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index af326ef..9b42d72 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -1,3 +1,14 @@ +/* + * Common io.c file + * This file is created by Russell King <rmk+kernel@arm.linux.org.uk> + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ #include <linux/module.h> #include <linux/io.h> #include <linux/mm.h> @@ -7,6 +18,7 @@ #include <mach/omap16xx.h> #include <mach/omap24xx.h> #include <mach/omap34xx.h> +#include <mach/omap44xx.h> #define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz))) #define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst))) @@ -92,7 +104,22 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT); } #endif - +#ifdef CONFIG_ARCH_OMAP4 + if (cpu_is_omap44xx()) { + if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE)) + return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT); + if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE)) + return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT); + if (BETWEEN(p, L4_WK_44XX_PHYS, L4_WK_44XX_SIZE)) + return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT); + if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE)) + return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT); + if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE)) + return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT); + if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE)) + return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT); + } +#endif return __arm_ioremap(p, size, type); } EXPORT_SYMBOL(omap_ioremap); diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c new file mode 100644 index 0000000..4cf449f --- /dev/null +++ b/arch/arm/plat-omap/iommu.c @@ -0,0 +1,996 @@ +/* + * omap iommu: tlb and pagetable primitives + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, + * Paul Mundt and Toshihiro Kobayashi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/clk.h> +#include <linux/platform_device.h> + +#include <asm/cacheflush.h> + +#include <mach/iommu.h> + +#include "iopgtable.h" + +/* accommodate the difference between omap1 and omap2/3 */ +static const struct iommu_functions *arch_iommu; + +static struct platform_driver omap_iommu_driver; +static struct kmem_cache *iopte_cachep; + +/** + * install_iommu_arch - Install archtecure specific iommu functions + * @ops: a pointer to architecture specific iommu functions + * + * There are several kind of iommu algorithm(tlb, pagetable) among + * omap series. This interface installs such an iommu algorighm. + **/ +int install_iommu_arch(const struct iommu_functions *ops) +{ + if (arch_iommu) + return -EBUSY; + + arch_iommu = ops; + return 0; +} +EXPORT_SYMBOL_GPL(install_iommu_arch); + +/** + * uninstall_iommu_arch - Uninstall archtecure specific iommu functions + * @ops: a pointer to architecture specific iommu functions + * + * This interface uninstalls the iommu algorighm installed previously. + **/ +void uninstall_iommu_arch(const struct iommu_functions *ops) +{ + if (arch_iommu != ops) + pr_err("%s: not your arch\n", __func__); + + arch_iommu = NULL; +} +EXPORT_SYMBOL_GPL(uninstall_iommu_arch); + +/** + * iommu_save_ctx - Save registers for pm off-mode support + * @obj: target iommu + **/ +void iommu_save_ctx(struct iommu *obj) +{ + arch_iommu->save_ctx(obj); +} +EXPORT_SYMBOL_GPL(iommu_save_ctx); + +/** + * iommu_restore_ctx - Restore registers for pm off-mode support + * @obj: target iommu + **/ +void iommu_restore_ctx(struct iommu *obj) +{ + arch_iommu->restore_ctx(obj); +} +EXPORT_SYMBOL_GPL(iommu_restore_ctx); + +/** + * iommu_arch_version - Return running iommu arch version + **/ +u32 iommu_arch_version(void) +{ + return arch_iommu->version; +} +EXPORT_SYMBOL_GPL(iommu_arch_version); + +static int iommu_enable(struct iommu *obj) +{ + int err; + + if (!obj) + return -EINVAL; + + clk_enable(obj->clk); + + err = arch_iommu->enable(obj); + + clk_disable(obj->clk); + return err; +} + +static void iommu_disable(struct iommu *obj) +{ + if (!obj) + return; + + clk_enable(obj->clk); + + arch_iommu->disable(obj); + + clk_disable(obj->clk); +} + +/* + * TLB operations + */ +void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e) +{ + BUG_ON(!cr || !e); + + arch_iommu->cr_to_e(cr, e); +} +EXPORT_SYMBOL_GPL(iotlb_cr_to_e); + +static inline int iotlb_cr_valid(struct cr_regs *cr) +{ + if (!cr) + return -EINVAL; + + return arch_iommu->cr_valid(cr); +} + +static inline struct cr_regs *iotlb_alloc_cr(struct iommu *obj, + struct iotlb_entry *e) +{ + if (!e) + return NULL; + + return arch_iommu->alloc_cr(obj, e); +} + +u32 iotlb_cr_to_virt(struct cr_regs *cr) +{ + return arch_iommu->cr_to_virt(cr); +} +EXPORT_SYMBOL_GPL(iotlb_cr_to_virt); + +static u32 get_iopte_attr(struct iotlb_entry *e) +{ + return arch_iommu->get_pte_attr(e); +} + +static u32 iommu_report_fault(struct iommu *obj, u32 *da) +{ + return arch_iommu->fault_isr(obj, da); +} + +static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l) +{ + u32 val; + + val = iommu_read_reg(obj, MMU_LOCK); + + l->base = MMU_LOCK_BASE(val); + l->vict = MMU_LOCK_VICT(val); + + BUG_ON(l->base != 0); /* Currently no preservation is used */ +} + +static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l) +{ + u32 val; + + BUG_ON(l->base != 0); /* Currently no preservation is used */ + + val = (l->base << MMU_LOCK_BASE_SHIFT); + val |= (l->vict << MMU_LOCK_VICT_SHIFT); + + iommu_write_reg(obj, val, MMU_LOCK); +} + +static void iotlb_read_cr(struct iommu *obj, struct cr_regs *cr) +{ + arch_iommu->tlb_read_cr(obj, cr); +} + +static void iotlb_load_cr(struct iommu *obj, struct cr_regs *cr) +{ + arch_iommu->tlb_load_cr(obj, cr); + + iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); + iommu_write_reg(obj, 1, MMU_LD_TLB); +} + +/** + * iotlb_dump_cr - Dump an iommu tlb entry into buf + * @obj: target iommu + * @cr: contents of cam and ram register + * @buf: output buffer + **/ +static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr, + char *buf) +{ + BUG_ON(!cr || !buf); + + return arch_iommu->dump_cr(obj, cr, buf); +} + +/** + * load_iotlb_entry - Set an iommu tlb entry + * @obj: target iommu + * @e: an iommu tlb entry info + **/ +int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e) +{ + int i; + int err = 0; + struct iotlb_lock l; + struct cr_regs *cr; + + if (!obj || !obj->nr_tlb_entries || !e) + return -EINVAL; + + clk_enable(obj->clk); + + for (i = 0; i < obj->nr_tlb_entries; i++) { + struct cr_regs tmp; + + iotlb_lock_get(obj, &l); + l.vict = i; + iotlb_lock_set(obj, &l); + iotlb_read_cr(obj, &tmp); + if (!iotlb_cr_valid(&tmp)) + break; + } + + if (i == obj->nr_tlb_entries) { + dev_dbg(obj->dev, "%s: full: no entry\n", __func__); + err = -EBUSY; + goto out; + } + + cr = iotlb_alloc_cr(obj, e); + if (IS_ERR(cr)) { + clk_disable(obj->clk); + return PTR_ERR(cr); + } + + iotlb_load_cr(obj, cr); + kfree(cr); + + /* increment victim for next tlb load */ + if (++l.vict == obj->nr_tlb_entries) + l.vict = 0; + iotlb_lock_set(obj, &l); +out: + clk_disable(obj->clk); + return err; +} +EXPORT_SYMBOL_GPL(load_iotlb_entry); + +/** + * flush_iotlb_page - Clear an iommu tlb entry + * @obj: target iommu + * @da: iommu device virtual address + * + * Clear an iommu tlb entry which includes 'da' address. + **/ +void flush_iotlb_page(struct iommu *obj, u32 da) +{ + struct iotlb_lock l; + int i; + + clk_enable(obj->clk); + + for (i = 0; i < obj->nr_tlb_entries; i++) { + struct cr_regs cr; + u32 start; + size_t bytes; + + iotlb_lock_get(obj, &l); + l.vict = i; + iotlb_lock_set(obj, &l); + iotlb_read_cr(obj, &cr); + if (!iotlb_cr_valid(&cr)) + continue; + + start = iotlb_cr_to_virt(&cr); + bytes = iopgsz_to_bytes(cr.cam & 3); + + if ((start <= da) && (da < start + bytes)) { + dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n", + __func__, start, da, bytes); + + iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); + } + } + clk_disable(obj->clk); + + if (i == obj->nr_tlb_entries) + dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da); +} +EXPORT_SYMBOL_GPL(flush_iotlb_page); + +/** + * flush_iotlb_range - Clear an iommu tlb entries + * @obj: target iommu + * @start: iommu device virtual address(start) + * @end: iommu device virtual address(end) + * + * Clear an iommu tlb entry which includes 'da' address. + **/ +void flush_iotlb_range(struct iommu *obj, u32 start, u32 end) +{ + u32 da = start; + + while (da < end) { + flush_iotlb_page(obj, da); + /* FIXME: Optimize for multiple page size */ + da += IOPTE_SIZE; + } +} +EXPORT_SYMBOL_GPL(flush_iotlb_range); + +/** + * flush_iotlb_all - Clear all iommu tlb entries + * @obj: target iommu + **/ +void flush_iotlb_all(struct iommu *obj) +{ + struct iotlb_lock l; + + clk_enable(obj->clk); + + l.base = 0; + l.vict = 0; + iotlb_lock_set(obj, &l); + + iommu_write_reg(obj, 1, MMU_GFLUSH); + + clk_disable(obj->clk); +} +EXPORT_SYMBOL_GPL(flush_iotlb_all); + +#if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE) + +ssize_t iommu_dump_ctx(struct iommu *obj, char *buf) +{ + ssize_t bytes; + + if (!obj || !buf) + return -EINVAL; + + clk_enable(obj->clk); + + bytes = arch_iommu->dump_ctx(obj, buf); + + clk_disable(obj->clk); + + return bytes; +} +EXPORT_SYMBOL_GPL(iommu_dump_ctx); + +static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs) +{ + int i; + struct iotlb_lock saved, l; + struct cr_regs *p = crs; + + clk_enable(obj->clk); + + iotlb_lock_get(obj, &saved); + memcpy(&l, &saved, sizeof(saved)); + + for (i = 0; i < obj->nr_tlb_entries; i++) { + struct cr_regs tmp; + + iotlb_lock_get(obj, &l); + l.vict = i; + iotlb_lock_set(obj, &l); + iotlb_read_cr(obj, &tmp); + if (!iotlb_cr_valid(&tmp)) + continue; + + *p++ = tmp; + } + iotlb_lock_set(obj, &saved); + clk_disable(obj->clk); + + return p - crs; +} + +/** + * dump_tlb_entries - dump cr arrays to given buffer + * @obj: target iommu + * @buf: output buffer + **/ +size_t dump_tlb_entries(struct iommu *obj, char *buf) +{ + int i, n; + struct cr_regs *cr; + char *p = buf; + + cr = kcalloc(obj->nr_tlb_entries, sizeof(*cr), GFP_KERNEL); + if (!cr) + return 0; + + n = __dump_tlb_entries(obj, cr); + for (i = 0; i < n; i++) + p += iotlb_dump_cr(obj, cr + i, p); + kfree(cr); + + return p - buf; +} +EXPORT_SYMBOL_GPL(dump_tlb_entries); + +int foreach_iommu_device(void *data, int (*fn)(struct device *, void *)) +{ + return driver_for_each_device(&omap_iommu_driver.driver, + NULL, data, fn); +} +EXPORT_SYMBOL_GPL(foreach_iommu_device); + +#endif /* CONFIG_OMAP_IOMMU_DEBUG_MODULE */ + +/* + * H/W pagetable operations + */ +static void flush_iopgd_range(u32 *first, u32 *last) +{ + /* FIXME: L2 cache should be taken care of if it exists */ + do { + asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pgd" + : : "r" (first)); + first += L1_CACHE_BYTES / sizeof(*first); + } while (first <= last); +} + +static void flush_iopte_range(u32 *first, u32 *last) +{ + /* FIXME: L2 cache should be taken care of if it exists */ + do { + asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pte" + : : "r" (first)); + first += L1_CACHE_BYTES / sizeof(*first); + } while (first <= last); +} + +static void iopte_free(u32 *iopte) +{ + /* Note: freed iopte's must be clean ready for re-use */ + kmem_cache_free(iopte_cachep, iopte); +} + +static u32 *iopte_alloc(struct iommu *obj, u32 *iopgd, u32 da) +{ + u32 *iopte; + + /* a table has already existed */ + if (*iopgd) + goto pte_ready; + + /* + * do the allocation outside the page table lock + */ + spin_unlock(&obj->page_table_lock); + iopte = kmem_cache_zalloc(iopte_cachep, GFP_KERNEL); + spin_lock(&obj->page_table_lock); + + if (!*iopgd) { + if (!iopte) + return ERR_PTR(-ENOMEM); + + *iopgd = virt_to_phys(iopte) | IOPGD_TABLE; + flush_iopgd_range(iopgd, iopgd); + + dev_vdbg(obj->dev, "%s: a new pte:%p\n", __func__, iopte); + } else { + /* We raced, free the reduniovant table */ + iopte_free(iopte); + } + +pte_ready: + iopte = iopte_offset(iopgd, da); + + dev_vdbg(obj->dev, + "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n", + __func__, da, iopgd, *iopgd, iopte, *iopte); + + return iopte; +} + +static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot) +{ + u32 *iopgd = iopgd_offset(obj, da); + + *iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION; + flush_iopgd_range(iopgd, iopgd); + return 0; +} + +static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot) +{ + u32 *iopgd = iopgd_offset(obj, da); + int i; + + for (i = 0; i < 16; i++) + *(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER; + flush_iopgd_range(iopgd, iopgd + 15); + return 0; +} + +static int iopte_alloc_page(struct iommu *obj, u32 da, u32 pa, u32 prot) +{ + u32 *iopgd = iopgd_offset(obj, da); + u32 *iopte = iopte_alloc(obj, iopgd, da); + + if (IS_ERR(iopte)) + return PTR_ERR(iopte); + + *iopte = (pa & IOPAGE_MASK) | prot | IOPTE_SMALL; + flush_iopte_range(iopte, iopte); + + dev_vdbg(obj->dev, "%s: da:%08x pa:%08x pte:%p *pte:%08x\n", + __func__, da, pa, iopte, *iopte); + + return 0; +} + +static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot) +{ + u32 *iopgd = iopgd_offset(obj, da); + u32 *iopte = iopte_alloc(obj, iopgd, da); + int i; + + if (IS_ERR(iopte)) + return PTR_ERR(iopte); + + for (i = 0; i < 16; i++) + *(iopte + i) = (pa & IOLARGE_MASK) | prot | IOPTE_LARGE; + flush_iopte_range(iopte, iopte + 15); + return 0; +} + +static int iopgtable_store_entry_core(struct iommu *obj, struct iotlb_entry *e) +{ + int (*fn)(struct iommu *, u32, u32, u32); + u32 prot; + int err; + + if (!obj || !e) + return -EINVAL; + + switch (e->pgsz) { + case MMU_CAM_PGSZ_16M: + fn = iopgd_alloc_super; + break; + case MMU_CAM_PGSZ_1M: + fn = iopgd_alloc_section; + break; + case MMU_CAM_PGSZ_64K: + fn = iopte_alloc_large; + break; + case MMU_CAM_PGSZ_4K: + fn = iopte_alloc_page; + break; + default: + fn = NULL; + BUG(); + break; + } + + prot = get_iopte_attr(e); + + spin_lock(&obj->page_table_lock); + err = fn(obj, e->da, e->pa, prot); + spin_unlock(&obj->page_table_lock); + + return err; +} + +/** + * iopgtable_store_entry - Make an iommu pte entry + * @obj: target iommu + * @e: an iommu tlb entry info + **/ +int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e) +{ + int err; + + flush_iotlb_page(obj, e->da); + err = iopgtable_store_entry_core(obj, e); +#ifdef PREFETCH_IOTLB + if (!err) + load_iotlb_entry(obj, e); +#endif + return err; +} +EXPORT_SYMBOL_GPL(iopgtable_store_entry); + +/** + * iopgtable_lookup_entry - Lookup an iommu pte entry + * @obj: target iommu + * @da: iommu device virtual address + * @ppgd: iommu pgd entry pointer to be returned + * @ppte: iommu pte entry pointer to be returned + **/ +void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte) +{ + u32 *iopgd, *iopte = NULL; + + iopgd = iopgd_offset(obj, da); + if (!*iopgd) + goto out; + + if (*iopgd & IOPGD_TABLE) + iopte = iopte_offset(iopgd, da); +out: + *ppgd = iopgd; + *ppte = iopte; +} +EXPORT_SYMBOL_GPL(iopgtable_lookup_entry); + +static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da) +{ + size_t bytes; + u32 *iopgd = iopgd_offset(obj, da); + int nent = 1; + + if (!*iopgd) + return 0; + + if (*iopgd & IOPGD_TABLE) { + int i; + u32 *iopte = iopte_offset(iopgd, da); + + bytes = IOPTE_SIZE; + if (*iopte & IOPTE_LARGE) { + nent *= 16; + /* rewind to the 1st entry */ + iopte = (u32 *)((u32)iopte & IOLARGE_MASK); + } + bytes *= nent; + memset(iopte, 0, nent * sizeof(*iopte)); + flush_iopte_range(iopte, iopte + (nent - 1) * sizeof(*iopte)); + + /* + * do table walk to check if this table is necessary or not + */ + iopte = iopte_offset(iopgd, 0); + for (i = 0; i < PTRS_PER_IOPTE; i++) + if (iopte[i]) + goto out; + + iopte_free(iopte); + nent = 1; /* for the next L1 entry */ + } else { + bytes = IOPGD_SIZE; + if (*iopgd & IOPGD_SUPER) { + nent *= 16; + /* rewind to the 1st entry */ + iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK); + } + bytes *= nent; + } + memset(iopgd, 0, nent * sizeof(*iopgd)); + flush_iopgd_range(iopgd, iopgd + (nent - 1) * sizeof(*iopgd)); +out: + return bytes; +} + +/** + * iopgtable_clear_entry - Remove an iommu pte entry + * @obj: target iommu + * @da: iommu device virtual address + **/ +size_t iopgtable_clear_entry(struct iommu *obj, u32 da) +{ + size_t bytes; + + spin_lock(&obj->page_table_lock); + + bytes = iopgtable_clear_entry_core(obj, da); + flush_iotlb_page(obj, da); + + spin_unlock(&obj->page_table_lock); + + return bytes; +} +EXPORT_SYMBOL_GPL(iopgtable_clear_entry); + +static void iopgtable_clear_entry_all(struct iommu *obj) +{ + int i; + + spin_lock(&obj->page_table_lock); + + for (i = 0; i < PTRS_PER_IOPGD; i++) { + u32 da; + u32 *iopgd; + + da = i << IOPGD_SHIFT; + iopgd = iopgd_offset(obj, da); + + if (!*iopgd) + continue; + + if (*iopgd & IOPGD_TABLE) + iopte_free(iopte_offset(iopgd, 0)); + + *iopgd = 0; + flush_iopgd_range(iopgd, iopgd); + } + + flush_iotlb_all(obj); + + spin_unlock(&obj->page_table_lock); +} + +/* + * Device IOMMU generic operations + */ +static irqreturn_t iommu_fault_handler(int irq, void *data) +{ + u32 stat, da; + u32 *iopgd, *iopte; + int err = -EIO; + struct iommu *obj = data; + + if (!obj->refcount) + return IRQ_NONE; + + /* Dynamic loading TLB or PTE */ + if (obj->isr) + err = obj->isr(obj); + + if (!err) + return IRQ_HANDLED; + + clk_enable(obj->clk); + stat = iommu_report_fault(obj, &da); + clk_disable(obj->clk); + if (!stat) + return IRQ_HANDLED; + + iopgd = iopgd_offset(obj, da); + + if (!(*iopgd & IOPGD_TABLE)) { + dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__, + da, iopgd, *iopgd); + return IRQ_NONE; + } + + iopte = iopte_offset(iopgd, da); + + dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n", + __func__, da, iopgd, *iopgd, iopte, *iopte); + + return IRQ_NONE; +} + +static int device_match_by_alias(struct device *dev, void *data) +{ + struct iommu *obj = to_iommu(dev); + const char *name = data; + + pr_debug("%s: %s %s\n", __func__, obj->name, name); + + return strcmp(obj->name, name) == 0; +} + +/** + * iommu_get - Get iommu handler + * @name: target iommu name + **/ +struct iommu *iommu_get(const char *name) +{ + int err = -ENOMEM; + struct device *dev; + struct iommu *obj; + + dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name, + device_match_by_alias); + if (!dev) + return ERR_PTR(-ENODEV); + + obj = to_iommu(dev); + + mutex_lock(&obj->iommu_lock); + + if (obj->refcount++ == 0) { + err = iommu_enable(obj); + if (err) + goto err_enable; + flush_iotlb_all(obj); + } + + if (!try_module_get(obj->owner)) + goto err_module; + + mutex_unlock(&obj->iommu_lock); + + dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name); + return obj; + +err_module: + if (obj->refcount == 1) + iommu_disable(obj); +err_enable: + obj->refcount--; + mutex_unlock(&obj->iommu_lock); + return ERR_PTR(err); +} +EXPORT_SYMBOL_GPL(iommu_get); + +/** + * iommu_put - Put back iommu handler + * @obj: target iommu + **/ +void iommu_put(struct iommu *obj) +{ + if (!obj && IS_ERR(obj)) + return; + + mutex_lock(&obj->iommu_lock); + + if (--obj->refcount == 0) + iommu_disable(obj); + + module_put(obj->owner); + + mutex_unlock(&obj->iommu_lock); + + dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name); +} +EXPORT_SYMBOL_GPL(iommu_put); + +/* + * OMAP Device MMU(IOMMU) detection + */ +static int __devinit omap_iommu_probe(struct platform_device *pdev) +{ + int err = -ENODEV; + void *p; + int irq; + struct iommu *obj; + struct resource *res; + struct iommu_platform_data *pdata = pdev->dev.platform_data; + + if (pdev->num_resources != 2) + return -EINVAL; + + obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL); + if (!obj) + return -ENOMEM; + + obj->clk = clk_get(&pdev->dev, pdata->clk_name); + if (IS_ERR(obj->clk)) + goto err_clk; + + obj->nr_tlb_entries = pdata->nr_tlb_entries; + obj->name = pdata->name; + obj->dev = &pdev->dev; + obj->ctx = (void *)obj + sizeof(*obj); + + mutex_init(&obj->iommu_lock); + mutex_init(&obj->mmap_lock); + spin_lock_init(&obj->page_table_lock); + INIT_LIST_HEAD(&obj->mmap); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + err = -ENODEV; + goto err_mem; + } + obj->regbase = ioremap(res->start, resource_size(res)); + if (!obj->regbase) { + err = -ENOMEM; + goto err_mem; + } + + res = request_mem_region(res->start, resource_size(res), + dev_name(&pdev->dev)); + if (!res) { + err = -EIO; + goto err_mem; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + err = -ENODEV; + goto err_irq; + } + err = request_irq(irq, iommu_fault_handler, IRQF_SHARED, + dev_name(&pdev->dev), obj); + if (err < 0) + goto err_irq; + platform_set_drvdata(pdev, obj); + + p = (void *)__get_free_pages(GFP_KERNEL, get_order(IOPGD_TABLE_SIZE)); + if (!p) { + err = -ENOMEM; + goto err_pgd; + } + memset(p, 0, IOPGD_TABLE_SIZE); + clean_dcache_area(p, IOPGD_TABLE_SIZE); + obj->iopgd = p; + + BUG_ON(!IS_ALIGNED((unsigned long)obj->iopgd, IOPGD_TABLE_SIZE)); + + dev_info(&pdev->dev, "%s registered\n", obj->name); + return 0; + +err_pgd: + free_irq(irq, obj); +err_irq: + release_mem_region(res->start, resource_size(res)); + iounmap(obj->regbase); +err_mem: + clk_put(obj->clk); +err_clk: + kfree(obj); + return err; +} + +static int __devexit omap_iommu_remove(struct platform_device *pdev) +{ + int irq; + struct resource *res; + struct iommu *obj = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + iopgtable_clear_entry_all(obj); + free_pages((unsigned long)obj->iopgd, get_order(IOPGD_TABLE_SIZE)); + + irq = platform_get_irq(pdev, 0); + free_irq(irq, obj); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + iounmap(obj->regbase); + + clk_put(obj->clk); + dev_info(&pdev->dev, "%s removed\n", obj->name); + kfree(obj); + return 0; +} + +static struct platform_driver omap_iommu_driver = { + .probe = omap_iommu_probe, + .remove = __devexit_p(omap_iommu_remove), + .driver = { + .name = "omap-iommu", + }, +}; + +static void iopte_cachep_ctor(void *iopte) +{ + clean_dcache_area(iopte, IOPTE_TABLE_SIZE); +} + +static int __init omap_iommu_init(void) +{ + struct kmem_cache *p; + const unsigned long flags = SLAB_HWCACHE_ALIGN; + size_t align = 1 << 10; /* L2 pagetable alignement */ + + p = kmem_cache_create("iopte_cache", IOPTE_TABLE_SIZE, align, flags, + iopte_cachep_ctor); + if (!p) + return -ENOMEM; + iopte_cachep = p; + + return platform_driver_register(&omap_iommu_driver); +} +module_init(omap_iommu_init); + +static void __exit omap_iommu_exit(void) +{ + kmem_cache_destroy(iopte_cachep); + + platform_driver_unregister(&omap_iommu_driver); +} +module_exit(omap_iommu_exit); + +MODULE_DESCRIPTION("omap iommu: tlb and pagetable primitives"); +MODULE_ALIAS("platform:omap-iommu"); +MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h new file mode 100644 index 0000000..37dac43 --- /dev/null +++ b/arch/arm/plat-omap/iopgtable.h @@ -0,0 +1,72 @@ +/* + * omap iommu: pagetable definitions + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PLAT_OMAP_IOMMU_H +#define __PLAT_OMAP_IOMMU_H + +#define IOPGD_SHIFT 20 +#define IOPGD_SIZE (1 << IOPGD_SHIFT) +#define IOPGD_MASK (~(IOPGD_SIZE - 1)) +#define IOSECTION_MASK IOPGD_MASK +#define PTRS_PER_IOPGD (1 << (32 - IOPGD_SHIFT)) +#define IOPGD_TABLE_SIZE (PTRS_PER_IOPGD * sizeof(u32)) + +#define IOSUPER_SIZE (IOPGD_SIZE << 4) +#define IOSUPER_MASK (~(IOSUPER_SIZE - 1)) + +#define IOPTE_SHIFT 12 +#define IOPTE_SIZE (1 << IOPTE_SHIFT) +#define IOPTE_MASK (~(IOPTE_SIZE - 1)) +#define IOPAGE_MASK IOPTE_MASK +#define PTRS_PER_IOPTE (1 << (IOPGD_SHIFT - IOPTE_SHIFT)) +#define IOPTE_TABLE_SIZE (PTRS_PER_IOPTE * sizeof(u32)) + +#define IOLARGE_SIZE (IOPTE_SIZE << 4) +#define IOLARGE_MASK (~(IOLARGE_SIZE - 1)) + +#define IOPGD_TABLE (1 << 0) +#define IOPGD_SECTION (2 << 0) +#define IOPGD_SUPER (1 << 18 | 2 << 0) + +#define IOPTE_SMALL (2 << 0) +#define IOPTE_LARGE (1 << 0) + +#define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1)) +#define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da)) + +#define iopte_paddr(iopgd) (*iopgd & ~((1 << 10) - 1)) +#define iopte_vaddr(iopgd) ((u32 *)phys_to_virt(iopte_paddr(iopgd))) + +#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1)) +#define iopte_offset(iopgd, da) (iopte_vaddr(iopgd) + iopte_index(da)) + +static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa, + u32 flags) +{ + memset(e, 0, sizeof(*e)); + + e->da = da; + e->pa = pa; + e->valid = 1; + /* FIXME: add OMAP1 support */ + e->pgsz = flags & MMU_CAM_PGSZ_MASK; + e->endian = flags & MMU_RAM_ENDIAN_MASK; + e->elsz = flags & MMU_RAM_ELSZ_MASK; + e->mixed = flags & MMU_RAM_MIXED_MASK; + + return iopgsz_to_bytes(e->pgsz); +} + +#define to_iommu(dev) \ + (struct iommu *)platform_get_drvdata(to_platform_device(dev)) + +#endif /* __PLAT_OMAP_IOMMU_H */ diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c new file mode 100644 index 0000000..2fce2c1 --- /dev/null +++ b/arch/arm/plat-omap/iovmm.c @@ -0,0 +1,896 @@ +/* + * omap iommu: simple virtual address space management + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/vmalloc.h> +#include <linux/device.h> +#include <linux/scatterlist.h> + +#include <asm/cacheflush.h> +#include <asm/mach/map.h> + +#include <mach/iommu.h> +#include <mach/iovmm.h> + +#include "iopgtable.h" + +/* + * A device driver needs to create address mappings between: + * + * - iommu/device address + * - physical address + * - mpu virtual address + * + * There are 4 possible patterns for them: + * + * |iova/ mapping iommu_ page + * | da pa va (d)-(p)-(v) function type + * --------------------------------------------------------------------------- + * 1 | c c c 1 - 1 - 1 _kmap() / _kunmap() s + * 2 | c c,a c 1 - 1 - 1 _kmalloc()/ _kfree() s + * 3 | c d c 1 - n - 1 _vmap() / _vunmap() s + * 4 | c d,a c 1 - n - 1 _vmalloc()/ _vfree() n* + * + * + * 'iova': device iommu virtual address + * 'da': alias of 'iova' + * 'pa': physical address + * 'va': mpu virtual address + * + * 'c': contiguous memory area + * 'd': dicontiguous memory area + * 'a': anonymous memory allocation + * '()': optional feature + * + * 'n': a normal page(4KB) size is used. + * 's': multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used. + * + * '*': not yet, but feasible. + */ + +static struct kmem_cache *iovm_area_cachep; + +/* return total bytes of sg buffers */ +static size_t sgtable_len(const struct sg_table *sgt) +{ + unsigned int i, total = 0; + struct scatterlist *sg; + + if (!sgt) + return 0; + + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + size_t bytes; + + bytes = sg_dma_len(sg); + + if (!iopgsz_ok(bytes)) { + pr_err("%s: sg[%d] not iommu pagesize(%x)\n", + __func__, i, bytes); + return 0; + } + + total += bytes; + } + + return total; +} +#define sgtable_ok(x) (!!sgtable_len(x)) + +/* + * calculate the optimal number sg elements from total bytes based on + * iommu superpages + */ +static unsigned int sgtable_nents(size_t bytes) +{ + int i; + unsigned int nr_entries; + const unsigned long pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, }; + + if (!IS_ALIGNED(bytes, PAGE_SIZE)) { + pr_err("%s: wrong size %08x\n", __func__, bytes); + return 0; + } + + nr_entries = 0; + for (i = 0; i < ARRAY_SIZE(pagesize); i++) { + if (bytes >= pagesize[i]) { + nr_entries += (bytes / pagesize[i]); + bytes %= pagesize[i]; + } + } + BUG_ON(bytes); + + return nr_entries; +} + +/* allocate and initialize sg_table header(a kind of 'superblock') */ +static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags) +{ + unsigned int nr_entries; + int err; + struct sg_table *sgt; + + if (!bytes) + return ERR_PTR(-EINVAL); + + if (!IS_ALIGNED(bytes, PAGE_SIZE)) + return ERR_PTR(-EINVAL); + + /* FIXME: IOVMF_DA_FIXED should support 'superpages' */ + if ((flags & IOVMF_LINEAR) && (flags & IOVMF_DA_ANON)) { + nr_entries = sgtable_nents(bytes); + if (!nr_entries) + return ERR_PTR(-EINVAL); + } else + nr_entries = bytes / PAGE_SIZE; + + sgt = kzalloc(sizeof(*sgt), GFP_KERNEL); + if (!sgt) + return ERR_PTR(-ENOMEM); + + err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL); + if (err) + return ERR_PTR(err); + + pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries); + + return sgt; +} + +/* free sg_table header(a kind of superblock) */ +static void sgtable_free(struct sg_table *sgt) +{ + if (!sgt) + return; + + sg_free_table(sgt); + kfree(sgt); + + pr_debug("%s: sgt:%p\n", __func__, sgt); +} + +/* map 'sglist' to a contiguous mpu virtual area and return 'va' */ +static void *vmap_sg(const struct sg_table *sgt) +{ + u32 va; + size_t total; + unsigned int i; + struct scatterlist *sg; + struct vm_struct *new; + const struct mem_type *mtype; + + mtype = get_mem_type(MT_DEVICE); + if (!mtype) + return ERR_PTR(-EINVAL); + + total = sgtable_len(sgt); + if (!total) + return ERR_PTR(-EINVAL); + + new = __get_vm_area(total, VM_IOREMAP, VMALLOC_START, VMALLOC_END); + if (!new) + return ERR_PTR(-ENOMEM); + va = (u32)new->addr; + + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + size_t bytes; + u32 pa; + int err; + + pa = sg_phys(sg); + bytes = sg_dma_len(sg); + + BUG_ON(bytes != PAGE_SIZE); + + err = ioremap_page(va, pa, mtype); + if (err) + goto err_out; + + va += bytes; + } + + flush_cache_vmap(new->addr, total); + return new->addr; + +err_out: + WARN_ON(1); /* FIXME: cleanup some mpu mappings */ + vunmap(new->addr); + return ERR_PTR(-EAGAIN); +} + +static inline void vunmap_sg(const void *va) +{ + vunmap(va); +} + +static struct iovm_struct *__find_iovm_area(struct iommu *obj, const u32 da) +{ + struct iovm_struct *tmp; + + list_for_each_entry(tmp, &obj->mmap, list) { + if ((da >= tmp->da_start) && (da < tmp->da_end)) { + size_t len; + + len = tmp->da_end - tmp->da_start; + + dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", + __func__, tmp->da_start, da, tmp->da_end, len, + tmp->flags); + + return tmp; + } + } + + return NULL; +} + +/** + * find_iovm_area - find iovma which includes @da + * @da: iommu device virtual address + * + * Find the existing iovma starting at @da + */ +struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da) +{ + struct iovm_struct *area; + + mutex_lock(&obj->mmap_lock); + area = __find_iovm_area(obj, da); + mutex_unlock(&obj->mmap_lock); + + return area; +} +EXPORT_SYMBOL_GPL(find_iovm_area); + +/* + * This finds the hole(area) which fits the requested address and len + * in iovmas mmap, and returns the new allocated iovma. + */ +static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da, + size_t bytes, u32 flags) +{ + struct iovm_struct *new, *tmp; + u32 start, prev_end, alignement; + + if (!obj || !bytes) + return ERR_PTR(-EINVAL); + + start = da; + alignement = PAGE_SIZE; + + if (flags & IOVMF_DA_ANON) { + /* + * Reserve the first page for NULL + */ + start = PAGE_SIZE; + if (flags & IOVMF_LINEAR) + alignement = iopgsz_max(bytes); + start = roundup(start, alignement); + } + + tmp = NULL; + if (list_empty(&obj->mmap)) + goto found; + + prev_end = 0; + list_for_each_entry(tmp, &obj->mmap, list) { + + if ((prev_end <= start) && (start + bytes < tmp->da_start)) + goto found; + + if (flags & IOVMF_DA_ANON) + start = roundup(tmp->da_end, alignement); + + prev_end = tmp->da_end; + } + + if ((start >= prev_end) && (ULONG_MAX - start >= bytes)) + goto found; + + dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n", + __func__, da, bytes, flags); + + return ERR_PTR(-EINVAL); + +found: + new = kmem_cache_zalloc(iovm_area_cachep, GFP_KERNEL); + if (!new) + return ERR_PTR(-ENOMEM); + + new->iommu = obj; + new->da_start = start; + new->da_end = start + bytes; + new->flags = flags; + + /* + * keep ascending order of iovmas + */ + if (tmp) + list_add_tail(&new->list, &tmp->list); + else + list_add(&new->list, &obj->mmap); + + dev_dbg(obj->dev, "%s: found %08x-%08x-%08x(%x) %08x\n", + __func__, new->da_start, start, new->da_end, bytes, flags); + + return new; +} + +static void free_iovm_area(struct iommu *obj, struct iovm_struct *area) +{ + size_t bytes; + + BUG_ON(!obj || !area); + + bytes = area->da_end - area->da_start; + + dev_dbg(obj->dev, "%s: %08x-%08x(%x) %08x\n", + __func__, area->da_start, area->da_end, bytes, area->flags); + + list_del(&area->list); + kmem_cache_free(iovm_area_cachep, area); +} + +/** + * da_to_va - convert (d) to (v) + * @obj: objective iommu + * @da: iommu device virtual address + * @va: mpu virtual address + * + * Returns mpu virtual addr which corresponds to a given device virtual addr + */ +void *da_to_va(struct iommu *obj, u32 da) +{ + void *va = NULL; + struct iovm_struct *area; + + mutex_lock(&obj->mmap_lock); + + area = __find_iovm_area(obj, da); + if (!area) { + dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da); + goto out; + } + va = area->va; + mutex_unlock(&obj->mmap_lock); +out: + return va; +} +EXPORT_SYMBOL_GPL(da_to_va); + +static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va) +{ + unsigned int i; + struct scatterlist *sg; + void *va = _va; + void *va_end; + + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + struct page *pg; + const size_t bytes = PAGE_SIZE; + + /* + * iommu 'superpage' isn't supported with 'iommu_vmalloc()' + */ + pg = vmalloc_to_page(va); + BUG_ON(!pg); + sg_set_page(sg, pg, bytes, 0); + + va += bytes; + } + + va_end = _va + PAGE_SIZE * i; + flush_cache_vmap(_va, va_end); +} + +static inline void sgtable_drain_vmalloc(struct sg_table *sgt) +{ + /* + * Actually this is not necessary at all, just exists for + * consistency of the code readibility. + */ + BUG_ON(!sgt); +} + +static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len) +{ + unsigned int i; + struct scatterlist *sg; + void *va; + + va = phys_to_virt(pa); + + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + size_t bytes; + + bytes = iopgsz_max(len); + + BUG_ON(!iopgsz_ok(bytes)); + + sg_set_buf(sg, phys_to_virt(pa), bytes); + /* + * 'pa' is cotinuous(linear). + */ + pa += bytes; + len -= bytes; + } + BUG_ON(len); + + clean_dcache_area(va, len); +} + +static inline void sgtable_drain_kmalloc(struct sg_table *sgt) +{ + /* + * Actually this is not necessary at all, just exists for + * consistency of the code readibility + */ + BUG_ON(!sgt); +} + +/* create 'da' <-> 'pa' mapping from 'sgt' */ +static int map_iovm_area(struct iommu *obj, struct iovm_struct *new, + const struct sg_table *sgt, u32 flags) +{ + int err; + unsigned int i, j; + struct scatterlist *sg; + u32 da = new->da_start; + + if (!obj || !new || !sgt) + return -EINVAL; + + BUG_ON(!sgtable_ok(sgt)); + + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + u32 pa; + int pgsz; + size_t bytes; + struct iotlb_entry e; + + pa = sg_phys(sg); + bytes = sg_dma_len(sg); + + flags &= ~IOVMF_PGSZ_MASK; + pgsz = bytes_to_iopgsz(bytes); + if (pgsz < 0) + goto err_out; + flags |= pgsz; + + pr_debug("%s: [%d] %08x %08x(%x)\n", __func__, + i, da, pa, bytes); + + iotlb_init_entry(&e, da, pa, flags); + err = iopgtable_store_entry(obj, &e); + if (err) + goto err_out; + + da += bytes; + } + return 0; + +err_out: + da = new->da_start; + + for_each_sg(sgt->sgl, sg, i, j) { + size_t bytes; + + bytes = iopgtable_clear_entry(obj, da); + + BUG_ON(!iopgsz_ok(bytes)); + + da += bytes; + } + return err; +} + +/* release 'da' <-> 'pa' mapping */ +static void unmap_iovm_area(struct iommu *obj, struct iovm_struct *area) +{ + u32 start; + size_t total = area->da_end - area->da_start; + + BUG_ON((!total) || !IS_ALIGNED(total, PAGE_SIZE)); + + start = area->da_start; + while (total > 0) { + size_t bytes; + + bytes = iopgtable_clear_entry(obj, start); + if (bytes == 0) + bytes = PAGE_SIZE; + else + dev_dbg(obj->dev, "%s: unmap %08x(%x) %08x\n", + __func__, start, bytes, area->flags); + + BUG_ON(!IS_ALIGNED(bytes, PAGE_SIZE)); + + total -= bytes; + start += bytes; + } + BUG_ON(total); +} + +/* template function for all unmapping */ +static struct sg_table *unmap_vm_area(struct iommu *obj, const u32 da, + void (*fn)(const void *), u32 flags) +{ + struct sg_table *sgt = NULL; + struct iovm_struct *area; + + if (!IS_ALIGNED(da, PAGE_SIZE)) { + dev_err(obj->dev, "%s: alignment err(%08x)\n", __func__, da); + return NULL; + } + + mutex_lock(&obj->mmap_lock); + + area = __find_iovm_area(obj, da); + if (!area) { + dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da); + goto out; + } + + if ((area->flags & flags) != flags) { + dev_err(obj->dev, "%s: wrong flags(%08x)\n", __func__, + area->flags); + goto out; + } + sgt = (struct sg_table *)area->sgt; + + unmap_iovm_area(obj, area); + + fn(area->va); + + dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", __func__, + area->da_start, da, area->da_end, + area->da_end - area->da_start, area->flags); + + free_iovm_area(obj, area); +out: + mutex_unlock(&obj->mmap_lock); + + return sgt; +} + +static u32 map_iommu_region(struct iommu *obj, u32 da, + const struct sg_table *sgt, void *va, size_t bytes, u32 flags) +{ + int err = -ENOMEM; + struct iovm_struct *new; + + mutex_lock(&obj->mmap_lock); + + new = alloc_iovm_area(obj, da, bytes, flags); + if (IS_ERR(new)) { + err = PTR_ERR(new); + goto err_alloc_iovma; + } + new->va = va; + new->sgt = sgt; + + if (map_iovm_area(obj, new, sgt, new->flags)) + goto err_map; + + mutex_unlock(&obj->mmap_lock); + + dev_dbg(obj->dev, "%s: da:%08x(%x) flags:%08x va:%p\n", + __func__, new->da_start, bytes, new->flags, va); + + return new->da_start; + +err_map: + free_iovm_area(obj, new); +err_alloc_iovma: + mutex_unlock(&obj->mmap_lock); + return err; +} + +static inline u32 __iommu_vmap(struct iommu *obj, u32 da, + const struct sg_table *sgt, void *va, size_t bytes, u32 flags) +{ + return map_iommu_region(obj, da, sgt, va, bytes, flags); +} + +/** + * iommu_vmap - (d)-(p)-(v) address mapper + * @obj: objective iommu + * @sgt: address of scatter gather table + * @flags: iovma and page property + * + * Creates 1-n-1 mapping with given @sgt and returns @da. + * All @sgt element must be io page size aligned. + */ +u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt, + u32 flags) +{ + size_t bytes; + void *va; + + if (!obj || !obj->dev || !sgt) + return -EINVAL; + + bytes = sgtable_len(sgt); + if (!bytes) + return -EINVAL; + bytes = PAGE_ALIGN(bytes); + + va = vmap_sg(sgt); + if (IS_ERR(va)) + return PTR_ERR(va); + + flags &= IOVMF_HW_MASK; + flags |= IOVMF_DISCONT; + flags |= IOVMF_MMIO; + flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON); + + da = __iommu_vmap(obj, da, sgt, va, bytes, flags); + if (IS_ERR_VALUE(da)) + vunmap_sg(va); + + return da; +} +EXPORT_SYMBOL_GPL(iommu_vmap); + +/** + * iommu_vunmap - release virtual mapping obtained by 'iommu_vmap()' + * @obj: objective iommu + * @da: iommu device virtual address + * + * Free the iommu virtually contiguous memory area starting at + * @da, which was returned by 'iommu_vmap()'. + */ +struct sg_table *iommu_vunmap(struct iommu *obj, u32 da) +{ + struct sg_table *sgt; + /* + * 'sgt' is allocated before 'iommu_vmalloc()' is called. + * Just returns 'sgt' to the caller to free + */ + sgt = unmap_vm_area(obj, da, vunmap_sg, IOVMF_DISCONT | IOVMF_MMIO); + if (!sgt) + dev_dbg(obj->dev, "%s: No sgt\n", __func__); + return sgt; +} +EXPORT_SYMBOL_GPL(iommu_vunmap); + +/** + * iommu_vmalloc - (d)-(p)-(v) address allocator and mapper + * @obj: objective iommu + * @da: contiguous iommu virtual memory + * @bytes: allocation size + * @flags: iovma and page property + * + * Allocate @bytes linearly and creates 1-n-1 mapping and returns + * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set. + */ +u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags) +{ + void *va; + struct sg_table *sgt; + + if (!obj || !obj->dev || !bytes) + return -EINVAL; + + bytes = PAGE_ALIGN(bytes); + + va = vmalloc(bytes); + if (!va) + return -ENOMEM; + + sgt = sgtable_alloc(bytes, flags); + if (IS_ERR(sgt)) { + da = PTR_ERR(sgt); + goto err_sgt_alloc; + } + sgtable_fill_vmalloc(sgt, va); + + flags &= IOVMF_HW_MASK; + flags |= IOVMF_DISCONT; + flags |= IOVMF_ALLOC; + flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON); + + da = __iommu_vmap(obj, da, sgt, va, bytes, flags); + if (IS_ERR_VALUE(da)) + goto err_iommu_vmap; + + return da; + +err_iommu_vmap: + sgtable_drain_vmalloc(sgt); + sgtable_free(sgt); +err_sgt_alloc: + vfree(va); + return da; +} +EXPORT_SYMBOL_GPL(iommu_vmalloc); + +/** + * iommu_vfree - release memory allocated by 'iommu_vmalloc()' + * @obj: objective iommu + * @da: iommu device virtual address + * + * Frees the iommu virtually continuous memory area starting at + * @da, as obtained from 'iommu_vmalloc()'. + */ +void iommu_vfree(struct iommu *obj, const u32 da) +{ + struct sg_table *sgt; + + sgt = unmap_vm_area(obj, da, vfree, IOVMF_DISCONT | IOVMF_ALLOC); + if (!sgt) + dev_dbg(obj->dev, "%s: No sgt\n", __func__); + sgtable_free(sgt); +} +EXPORT_SYMBOL_GPL(iommu_vfree); + +static u32 __iommu_kmap(struct iommu *obj, u32 da, u32 pa, void *va, + size_t bytes, u32 flags) +{ + struct sg_table *sgt; + + sgt = sgtable_alloc(bytes, flags); + if (IS_ERR(sgt)) + return PTR_ERR(sgt); + + sgtable_fill_kmalloc(sgt, pa, bytes); + + da = map_iommu_region(obj, da, sgt, va, bytes, flags); + if (IS_ERR_VALUE(da)) { + sgtable_drain_kmalloc(sgt); + sgtable_free(sgt); + } + + return da; +} + +/** + * iommu_kmap - (d)-(p)-(v) address mapper + * @obj: objective iommu + * @da: contiguous iommu virtual memory + * @pa: contiguous physical memory + * @flags: iovma and page property + * + * Creates 1-1-1 mapping and returns @da again, which can be + * adjusted if 'IOVMF_DA_ANON' is set. + */ +u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes, + u32 flags) +{ + void *va; + + if (!obj || !obj->dev || !bytes) + return -EINVAL; + + bytes = PAGE_ALIGN(bytes); + + va = ioremap(pa, bytes); + if (!va) + return -ENOMEM; + + flags &= IOVMF_HW_MASK; + flags |= IOVMF_LINEAR; + flags |= IOVMF_MMIO; + flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON); + + da = __iommu_kmap(obj, da, pa, va, bytes, flags); + if (IS_ERR_VALUE(da)) + iounmap(va); + + return da; +} +EXPORT_SYMBOL_GPL(iommu_kmap); + +/** + * iommu_kunmap - release virtual mapping obtained by 'iommu_kmap()' + * @obj: objective iommu + * @da: iommu device virtual address + * + * Frees the iommu virtually contiguous memory area starting at + * @da, which was passed to and was returned by'iommu_kmap()'. + */ +void iommu_kunmap(struct iommu *obj, u32 da) +{ + struct sg_table *sgt; + typedef void (*func_t)(const void *); + + sgt = unmap_vm_area(obj, da, (func_t)__iounmap, + IOVMF_LINEAR | IOVMF_MMIO); + if (!sgt) + dev_dbg(obj->dev, "%s: No sgt\n", __func__); + sgtable_free(sgt); +} +EXPORT_SYMBOL_GPL(iommu_kunmap); + +/** + * iommu_kmalloc - (d)-(p)-(v) address allocator and mapper + * @obj: objective iommu + * @da: contiguous iommu virtual memory + * @bytes: bytes for allocation + * @flags: iovma and page property + * + * Allocate @bytes linearly and creates 1-1-1 mapping and returns + * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set. + */ +u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags) +{ + void *va; + u32 pa; + + if (!obj || !obj->dev || !bytes) + return -EINVAL; + + bytes = PAGE_ALIGN(bytes); + + va = kmalloc(bytes, GFP_KERNEL | GFP_DMA); + if (!va) + return -ENOMEM; + pa = virt_to_phys(va); + + flags &= IOVMF_HW_MASK; + flags |= IOVMF_LINEAR; + flags |= IOVMF_ALLOC; + flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON); + + da = __iommu_kmap(obj, da, pa, va, bytes, flags); + if (IS_ERR_VALUE(da)) + kfree(va); + + return da; +} +EXPORT_SYMBOL_GPL(iommu_kmalloc); + +/** + * iommu_kfree - release virtual mapping obtained by 'iommu_kmalloc()' + * @obj: objective iommu + * @da: iommu device virtual address + * + * Frees the iommu virtually contiguous memory area starting at + * @da, which was passed to and was returned by'iommu_kmalloc()'. + */ +void iommu_kfree(struct iommu *obj, u32 da) +{ + struct sg_table *sgt; + + sgt = unmap_vm_area(obj, da, kfree, IOVMF_LINEAR | IOVMF_ALLOC); + if (!sgt) + dev_dbg(obj->dev, "%s: No sgt\n", __func__); + sgtable_free(sgt); +} +EXPORT_SYMBOL_GPL(iommu_kfree); + + +static int __init iovmm_init(void) +{ + const unsigned long flags = SLAB_HWCACHE_ALIGN; + struct kmem_cache *p; + + p = kmem_cache_create("iovm_area_cache", sizeof(struct iovm_struct), 0, + flags, NULL); + if (!p) + return -ENOMEM; + iovm_area_cachep = p; + + return 0; +} +module_init(iovmm_init); + +static void __exit iovmm_exit(void) +{ + kmem_cache_destroy(iovm_area_cachep); +} +module_exit(iovmm_exit); + +MODULE_DESCRIPTION("omap iommu: simple virtual address space management"); +MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 28b0a82..efa0e01 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -91,11 +91,20 @@ static void omap_mcbsp_dump_reg(u8 id) static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) { struct omap_mcbsp *mcbsp_tx = dev_id; + u16 irqst_spcr2; - dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", - OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2)); + irqst_spcr2 = OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2); + dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2); - complete(&mcbsp_tx->tx_irq_completion); + if (irqst_spcr2 & XSYNC_ERR) { + dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n", + irqst_spcr2); + /* Writing zero to XSYNC_ERR clears the IRQ */ + OMAP_MCBSP_WRITE(mcbsp_tx->io_base, SPCR2, + irqst_spcr2 & ~(XSYNC_ERR)); + } else { + complete(&mcbsp_tx->tx_irq_completion); + } return IRQ_HANDLED; } @@ -103,11 +112,20 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) { struct omap_mcbsp *mcbsp_rx = dev_id; + u16 irqst_spcr1; - dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", - OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2)); + irqst_spcr1 = OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR1); + dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1); - complete(&mcbsp_rx->rx_irq_completion); + if (irqst_spcr1 & RSYNC_ERR) { + dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n", + irqst_spcr1); + /* Writing zero to RSYNC_ERR clears the IRQ */ + OMAP_MCBSP_WRITE(mcbsp_rx->io_base, SPCR1, + irqst_spcr1 & ~(RSYNC_ERR)); + } else { + complete(&mcbsp_rx->tx_irq_completion); + } return IRQ_HANDLED; } diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 80b040f..8d329fb 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -54,6 +54,9 @@ int __init_or_module omap_cfg_reg(const unsigned long index) { struct pin_config *reg; + if (cpu_is_omap44xx()) + return 0; + if (mux_cfg == NULL) { printk(KERN_ERR "Pin mux table not initialized\n"); return -ENODEV; diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index fa5297d..a5b9bcd 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -6,6 +6,9 @@ * Copyright (C) 2005 Nokia Corporation * Written by Tony Lindgren <tony@atomide.com> * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -38,12 +41,14 @@ #define OMAP1_SRAM_VA VMALLOC_END #define OMAP2_SRAM_PA 0x40200000 #define OMAP2_SRAM_PUB_PA 0x4020f800 -#define OMAP2_SRAM_VA VMALLOC_END -#define OMAP2_SRAM_PUB_VA (VMALLOC_END + 0x800) +#define OMAP2_SRAM_VA 0xe3000000 +#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800) #define OMAP3_SRAM_PA 0x40200000 #define OMAP3_SRAM_VA 0xd7000000 #define OMAP3_SRAM_PUB_PA 0x40208000 #define OMAP3_SRAM_PUB_VA 0xd7008000 +#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ +#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define SRAM_BOOTLOADER_SZ 0x00 @@ -87,6 +92,10 @@ static int is_sram_locked(void) { int type = 0; + if (cpu_is_omap44xx()) + /* Not yet supported */ + return 0; + if (cpu_is_omap242x()) type = omap_rev() & OMAP2_DEVICETYPE_MASK; @@ -135,6 +144,10 @@ void __init omap_detect_sram(void) omap_sram_base = OMAP3_SRAM_VA; omap_sram_start = OMAP3_SRAM_PA; omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap44xx()) { + omap_sram_base = OMAP4_SRAM_VA; + omap_sram_start = OMAP4_SRAM_PA; + omap_sram_size = 0x8000; /* 32K */ } else { omap_sram_base = OMAP2_SRAM_VA; omap_sram_start = OMAP2_SRAM_PA; @@ -201,8 +214,23 @@ void __init omap_map_sram(void) base = OMAP3_SRAM_PA; base = ROUND_DOWN(base, PAGE_SIZE); omap_sram_io_desc[0].pfn = __phys_to_pfn(base); + + /* + * SRAM must be marked as non-cached on OMAP3 since the + * CORE DPLL M2 divider change code (in SRAM) runs with the + * SDRAM controller disabled, and if it is marked cached, + * the ARM may attempt to write cache lines back to SDRAM + * which will cause the system to hang. + */ + omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED; } + if (cpu_is_omap44xx()) { + omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA; + base = OMAP4_SRAM_PA; + base = ROUND_DOWN(base, PAGE_SIZE); + omap_sram_io_desc[0].pfn = __phys_to_pfn(base); + } omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */ iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc)); @@ -242,20 +270,13 @@ void * omap_sram_push(void * start, unsigned long size) return (void *)omap_sram_ceil; } -static void omap_sram_error(void) -{ - panic("Uninitialized SRAM function\n"); -} - #ifdef CONFIG_ARCH_OMAP1 static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) { - if (!_omap_sram_reprogram_clock) - omap_sram_error(); - + BUG_ON(!_omap_sram_reprogram_clock); _omap_sram_reprogram_clock(dpllctl, ckctl); } @@ -280,9 +301,7 @@ static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, u32 base_cs, u32 force_unlock) { - if (!_omap2_sram_ddr_init) - omap_sram_error(); - + BUG_ON(!_omap2_sram_ddr_init); _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, base_cs, force_unlock); } @@ -292,9 +311,7 @@ static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) { - if (!_omap2_sram_reprogram_sdrc) - omap_sram_error(); - + BUG_ON(!_omap2_sram_reprogram_sdrc); _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); } @@ -302,9 +319,7 @@ static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) { - if (!_omap2_set_prcm) - omap_sram_error(); - + BUG_ON(!_omap2_set_prcm); return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); } #endif @@ -356,16 +371,15 @@ static inline int omap243x_sram_init(void) static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrlb, - u32 m2); + u32 m2, u32 unlock_dll); u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2) + u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll) { - if (!_omap3_sram_configure_core_dpll) - omap_sram_error(); - + BUG_ON(!_omap3_sram_configure_core_dpll); return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, sdrc_actim_ctrla, - sdrc_actim_ctrlb, m2); + sdrc_actim_ctrlb, m2, + unlock_dll); } /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ @@ -406,6 +420,8 @@ int __init omap_sram_init(void) omap243x_sram_init(); else if (cpu_is_omap34xx()) omap34xx_sram_init(); + else if (cpu_is_omap44xx()) + omap34xx_sram_init(); /* FIXME: */ return 0; } diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 32eb9e3..e814803 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -15,10 +15,9 @@ #include <linux/spinlock.h> #include <linux/bitops.h> #include <linux/io.h> -#include <asm/gpio.h> +#include <linux/gpio.h> static DEFINE_SPINLOCK(gpio_lock); -static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */ static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)]; static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)]; @@ -46,82 +45,54 @@ static void __set_level(unsigned pin, int high) writel(u, GPIO_OUT(pin)); } - -/* - * GENERIC_GPIO primitives. - */ -int gpio_direction_input(unsigned pin) +static inline void __set_blinking(unsigned pin, int blink) { - unsigned long flags; - - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_input)) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); - return -EINVAL; - } - - spin_lock_irqsave(&gpio_lock, flags); - - /* - * Some callers might not have used gpio_request(), - * so flag this pin as requested now. - */ - if (gpio_label[pin] == NULL) - gpio_label[pin] = "?"; + u32 u; - /* - * Configure GPIO direction. - */ - __set_direction(pin, 1); + u = readl(GPIO_BLINK_EN(pin)); + if (blink) + u |= 1 << (pin & 31); + else + u &= ~(1 << (pin & 31)); + writel(u, GPIO_BLINK_EN(pin)); +} - spin_unlock_irqrestore(&gpio_lock, flags); +static inline int orion_gpio_is_valid(unsigned pin, int mode) +{ + if (pin < GPIO_MAX) { + if ((mode & GPIO_INPUT_OK) && !test_bit(pin, gpio_valid_input)) + goto err_out; + if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, gpio_valid_output)) + goto err_out; + return true; + } - return 0; +err_out: + pr_debug("%s: invalid GPIO %d\n", __func__, pin); + return false; } -EXPORT_SYMBOL(gpio_direction_input); -int gpio_direction_output(unsigned pin, int value) +/* + * GENERIC_GPIO primitives. + */ +static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin) { unsigned long flags; - u32 u; - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_output)) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); + if (!orion_gpio_is_valid(pin, GPIO_INPUT_OK)) return -EINVAL; - } spin_lock_irqsave(&gpio_lock, flags); - /* - * Some callers might not have used gpio_request(), - * so flag this pin as requested now. - */ - if (gpio_label[pin] == NULL) - gpio_label[pin] = "?"; - - /* - * Disable blinking. - */ - u = readl(GPIO_BLINK_EN(pin)); - u &= ~(1 << (pin & 31)); - writel(u, GPIO_BLINK_EN(pin)); - - /* - * Configure GPIO output value. - */ - __set_level(pin, value); - - /* - * Configure GPIO direction. - */ - __set_direction(pin, 0); + /* Configure GPIO direction. */ + __set_direction(pin, 1); spin_unlock_irqrestore(&gpio_lock, flags); return 0; } -EXPORT_SYMBOL(gpio_direction_output); -int gpio_get_value(unsigned pin) +static int orion_gpio_get_value(struct gpio_chip *chip, unsigned pin) { int val; @@ -132,83 +103,75 @@ int gpio_get_value(unsigned pin) return (val >> (pin & 31)) & 1; } -EXPORT_SYMBOL(gpio_get_value); -void gpio_set_value(unsigned pin, int value) +static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, + int value) { unsigned long flags; - u32 u; + + if (!orion_gpio_is_valid(pin, GPIO_OUTPUT_OK)) + return -EINVAL; spin_lock_irqsave(&gpio_lock, flags); - /* - * Disable blinking. - */ - u = readl(GPIO_BLINK_EN(pin)); - u &= ~(1 << (pin & 31)); - writel(u, GPIO_BLINK_EN(pin)); + /* Disable blinking. */ + __set_blinking(pin, 0); - /* - * Configure GPIO output value. - */ + /* Configure GPIO output value. */ __set_level(pin, value); + /* Configure GPIO direction. */ + __set_direction(pin, 0); + spin_unlock_irqrestore(&gpio_lock, flags); + + return 0; } -EXPORT_SYMBOL(gpio_set_value); -int gpio_request(unsigned pin, const char *label) +static void orion_gpio_set_value(struct gpio_chip *chip, unsigned pin, + int value) { unsigned long flags; - int ret; - - if (pin >= GPIO_MAX || - !(test_bit(pin, gpio_valid_input) || - test_bit(pin, gpio_valid_output))) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); - return -EINVAL; - } spin_lock_irqsave(&gpio_lock, flags); - if (gpio_label[pin] == NULL) { - gpio_label[pin] = label ? label : "?"; - ret = 0; - } else { - pr_debug("%s: GPIO %d already used as %s\n", - __func__, pin, gpio_label[pin]); - ret = -EBUSY; - } - spin_unlock_irqrestore(&gpio_lock, flags); - return ret; + /* Configure GPIO output value. */ + __set_level(pin, value); + + spin_unlock_irqrestore(&gpio_lock, flags); } -EXPORT_SYMBOL(gpio_request); -void gpio_free(unsigned pin) +static int orion_gpio_request(struct gpio_chip *chip, unsigned pin) { - if (pin >= GPIO_MAX || - !(test_bit(pin, gpio_valid_input) || - test_bit(pin, gpio_valid_output))) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); - return; - } - - if (gpio_label[pin] == NULL) - pr_warning("%s: GPIO %d already freed\n", __func__, pin); - else - gpio_label[pin] = NULL; + if (orion_gpio_is_valid(pin, GPIO_INPUT_OK) || + orion_gpio_is_valid(pin, GPIO_OUTPUT_OK)) + return 0; + return -EINVAL; } -EXPORT_SYMBOL(gpio_free); +static struct gpio_chip orion_gpiochip = { + .label = "orion_gpio", + .direction_input = orion_gpio_direction_input, + .get = orion_gpio_get_value, + .direction_output = orion_gpio_direction_output, + .set = orion_gpio_set_value, + .request = orion_gpio_request, + .base = 0, + .ngpio = GPIO_MAX, + .can_sleep = 0, +}; + +void __init orion_gpio_init(void) +{ + gpiochip_add(&orion_gpiochip); +} /* * Orion-specific GPIO API extensions. */ void __init orion_gpio_set_unused(unsigned pin) { - /* - * Configure as output, drive low. - */ + /* Configure as output, drive low. */ __set_level(pin, 0); __set_direction(pin, 0); } @@ -230,21 +193,14 @@ void __init orion_gpio_set_valid(unsigned pin, int mode) void orion_gpio_set_blink(unsigned pin, int blink) { unsigned long flags; - u32 u; spin_lock_irqsave(&gpio_lock, flags); - /* - * Set output value to zero. - */ + /* Set output value to zero. */ __set_level(pin, 0); - u = readl(GPIO_BLINK_EN(pin)); - if (blink) - u |= 1 << (pin & 31); - else - u &= ~(1 << (pin & 31)); - writel(u, GPIO_BLINK_EN(pin)); + /* Set blinking. */ + __set_blinking(pin, blink); spin_unlock_irqrestore(&gpio_lock, flags); } @@ -368,7 +324,7 @@ static int gpio_irq_set_type(u32 irq, u32 type) } struct irq_chip orion_gpio_irq_chip = { - .name = "orion_gpio", + .name = "orion_gpio_irq", .ack = gpio_irq_ack, .mask = gpio_irq_mask, .unmask = gpio_irq_unmask, diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index 33f6c6a..9646a94 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -14,12 +14,9 @@ /* * GENERIC_GPIO primitives. */ -int gpio_request(unsigned pin, const char *label); -void gpio_free(unsigned pin); -int gpio_direction_input(unsigned pin); -int gpio_direction_output(unsigned pin, int value); -int gpio_get_value(unsigned pin); -void gpio_set_value(unsigned pin, int value); +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep /* * Orion-specific GPIO API extensions. @@ -27,11 +24,13 @@ void gpio_set_value(unsigned pin, int value); void orion_gpio_set_unused(unsigned pin); void orion_gpio_set_blink(unsigned pin, int blink); -#define GPIO_BIDI_OK (1 << 0) -#define GPIO_INPUT_OK (1 << 1) -#define GPIO_OUTPUT_OK (1 << 2) +#define GPIO_INPUT_OK (1 << 0) +#define GPIO_OUTPUT_OK (1 << 1) void orion_gpio_set_valid(unsigned pin, int mode); +/* Initialize gpiolib. */ +void __init orion_gpio_init(void); + /* * GPIO interrupt handling. */ diff --git a/arch/arm/plat-orion/include/plat/orion5x_wdt.h b/arch/arm/plat-orion/include/plat/orion_wdt.h index 3c9cf6a3..665c362 100644 --- a/arch/arm/plat-orion/include/plat/orion5x_wdt.h +++ b/arch/arm/plat-orion/include/plat/orion_wdt.h @@ -1,15 +1,15 @@ /* - * arch/arm/plat-orion/include/plat/orion5x_wdt.h + * arch/arm/plat-orion/include/plat/orion_wdt.h * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#ifndef __PLAT_ORION5X_WDT_H -#define __PLAT_ORION5X_WDT_H +#ifndef __PLAT_ORION_WDT_H +#define __PLAT_ORION_WDT_H -struct orion5x_wdt_platform_data { +struct orion_wdt_platform_data { u32 tclk; /* no <linux/clk.h> support yet */ }; diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index de8a001..715a301 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -12,11 +12,15 @@ */ #include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/cnt32_to_63.h> +#include <linux/timer.h> #include <linux/clockchips.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <asm/mach/time.h> #include <mach/bridge-regs.h> +#include <mach/hardware.h> /* * Number of timer ticks per jiffy. @@ -39,6 +43,56 @@ static u32 ticks_per_jiffy; /* + * Orion's sched_clock implementation. It has a resolution of + * at least 7.5ns (133MHz TCLK) and a maximum value of 834 days. + * + * Because the hardware timer period is quite short (21 secs if + * 200MHz TCLK) and because cnt32_to_63() needs to be called at + * least once per half period to work properly, a kernel timer is + * set up to ensure this requirement is always met. + */ +#define TCLK2NS_SCALE_FACTOR 8 + +static unsigned long tclk2ns_scale; + +unsigned long long sched_clock(void) +{ + unsigned long long v = cnt32_to_63(0xffffffff - readl(TIMER0_VAL)); + return (v * tclk2ns_scale) >> TCLK2NS_SCALE_FACTOR; +} + +static struct timer_list cnt32_to_63_keepwarm_timer; + +static void cnt32_to_63_keepwarm(unsigned long data) +{ + mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data)); + (void) sched_clock(); +} + +static void __init setup_sched_clock(unsigned long tclk) +{ + unsigned long long v; + unsigned long data; + + v = NSEC_PER_SEC; + v <<= TCLK2NS_SCALE_FACTOR; + v += tclk/2; + do_div(v, tclk); + /* + * We want an even value to automatically clear the top bit + * returned by cnt32_to_63() without an additional run time + * instruction. So if the LSB is 1 then round it up. + */ + if (v & 1) + v++; + tclk2ns_scale = v; + + data = (0xffffffffUL / tclk / 2 - 2) * HZ; + setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, data); + mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data)); +} + +/* * Clocksource handling. */ static cycle_t orion_clksrc_read(struct clocksource *cs) @@ -176,6 +230,10 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk) ticks_per_jiffy = (tclk + HZ/2) / HZ; + /* + * Set scale and timer for sched_clock + */ + setup_sched_clock(tclk); /* * Setup free-running clocksource timer (interrupts @@ -190,7 +248,6 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk) orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift); clocksource_register(&orion_clksrc); - /* * Setup clockevent timer (interrupt-driven.) */ diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index af819bf..abc79d4 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -121,6 +121,8 @@ static int __init pxa_init_gpio_chip(int gpio_end) return -ENOMEM; } + memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip)); + for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { struct gpio_chip *c = &chips[i].chip; @@ -143,6 +145,21 @@ static int __init pxa_init_gpio_chip(int gpio_end) return 0; } +/* Update only those GRERx and GFERx edge detection register bits if those + * bits are set in c->irq_mask + */ +static inline void update_edge_detect(struct pxa_gpio_chip *c) +{ + uint32_t grer, gfer; + + grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask; + gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask; + grer |= c->irq_edge_rise & c->irq_mask; + gfer |= c->irq_edge_fall & c->irq_mask; + __raw_writel(grer, c->regbase + GRER_OFFSET); + __raw_writel(gfer, c->regbase + GFER_OFFSET); +} + static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) { struct pxa_gpio_chip *c; @@ -181,8 +198,7 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) else c->irq_edge_fall &= ~mask; - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio, ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), @@ -244,8 +260,7 @@ static void pxa_unmask_muxed_gpio(unsigned int irq) struct pxa_gpio_chip *c = gpio_to_chip(gpio); c->irq_mask |= GPIO_bit(gpio); - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); } static struct irq_chip pxa_muxed_gpio_chip = { diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c index b6be76e..4d01ef1 100644 --- a/arch/arm/plat-s3c/clock.c +++ b/arch/arm/plat-s3c/clock.c @@ -306,8 +306,6 @@ struct clk s3c24xx_uclk = { int s3c24xx_register_clock(struct clk *clk) { - clk->owner = THIS_MODULE; - if (clk->enable == NULL) clk->enable = clk_null_enable; diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index b07fec0..196b191 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1195,7 +1195,7 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d EXPORT_SYMBOL(s3c2410_dma_getposition); -static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev) +static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev) { return container_of(dev, struct s3c2410_dma_chan, dev); } diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index ccb82e8..da7b60e 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -57,7 +57,7 @@ #if 1 #define gpio_dbg(x...) do { } while(0) #else -#define gpio_dbg(x...) printk(KERN_DEBUG ## x) +#define gpio_dbg(x...) printk(KERN_DEBUG x) #endif /* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h index 8154951..2ba1767 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h @@ -61,14 +61,14 @@ #define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28) #define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28) -#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 32) -#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 32) -#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 32) -#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 32) -#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 32) - -#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 36) -#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 36) -#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 36) -#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 36) +#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0) +#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0) +#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0) +#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0) +#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0) +#define S3C64XX_GPH9_OUTPUT (0x01 << 4) +#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4) +#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4) +#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4) +#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4) diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 945e0d2..fec6467 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon Mar 23 20:09:01 2009 +# Last update: Fri May 29 10:14:20 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -916,7 +916,7 @@ nxdb500 MACH_NXDB500 NXDB500 905 apf9328 MACH_APF9328 APF9328 906 omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907 omap_twip MACH_OMAP_TWIP OMAP_TWIP 908 -palmt650 MACH_PALMT650 PALMT650 909 +treo650 MACH_TREO650 TREO650 909 acumen MACH_ACUMEN ACUMEN 910 xp100 MACH_XP100 XP100 911 fs2410 MACH_FS2410 FS2410 912 @@ -1232,7 +1232,7 @@ ql202b MACH_QL202B QL202B 1226 vpac270 MACH_VPAC270 VPAC270 1227 rd129 MACH_RD129 RD129 1228 htcwizard MACH_HTCWIZARD HTCWIZARD 1229 -xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230 +treo680 MACH_TREO680 TREO680 1230 tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231 zylonite MACH_ZYLONITE ZYLONITE 1233 gene1270 MACH_GENE1270 GENE1270 1234 @@ -1418,10 +1418,10 @@ looxc550 MACH_LOOXC550 LOOXC550 1417 cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418 app3xx MACH_APP3XX APP3XX 1419 sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420 -palmtreo700p MACH_PALMTREO700P PALMTREO700P 1421 -palmtreo700w MACH_PALMTREO700W PALMTREO700W 1422 -palmtreo750 MACH_PALMTREO750 PALMTREO750 1423 -palmtreo755p MACH_PALMTREO755P PALMTREO755P 1424 +treo700p MACH_TREO700P TREO700P 1421 +treo700w MACH_TREO700W TREO700W 1422 +treo750 MACH_TREO750 TREO750 1423 +treo755p MACH_TREO755P TREO755P 1424 ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425 sarge MACH_SARGE SARGE 1426 a696 MACH_A696 A696 1427 @@ -1721,7 +1721,7 @@ sapphire MACH_SAPPHIRE SAPPHIRE 1729 csb637xo MACH_CSB637XO CSB637XO 1730 evisiong MACH_EVISIONG EVISIONG 1731 stmp37xx MACH_STMP37XX STMP37XX 1732 -stmp378x MACH_STMP38XX STMP38XX 1733 +stmp378x MACH_STMP378X STMP378X 1733 tnt MACH_TNT TNT 1734 tbxt MACH_TBXT TBXT 1735 playmate MACH_PLAYMATE PLAYMATE 1736 @@ -1817,7 +1817,7 @@ smdkc100 MACH_SMDKC100 SMDKC100 1826 tavorevb MACH_TAVOREVB TAVOREVB 1827 saar MACH_SAAR SAAR 1828 deister_eyecam MACH_DEISTER_EYECAM DEISTER_EYECAM 1829 -at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830 +at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830 linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831 hit_b0 MACH_HIT_B0 HIT_B0 1832 adx_rmu MACH_ADX_RMU ADX_RMU 1833 @@ -2132,3 +2132,116 @@ apollo MACH_APOLLO APOLLO 2141 at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142 spc300 MACH_SPC300 SPC300 2143 eko MACH_EKO EKO 2144 +ccw9m2443 MACH_CCW9M2443 CCW9M2443 2145 +ccw9m2443js MACH_CCW9M2443JS CCW9M2443JS 2146 +m2m_router_device MACH_M2M_ROUTER_DEVICE M2M_ROUTER_DEVICE 2147 +str9104nas MACH_STAR9104NAS STAR9104NAS 2148 +pca100 MACH_PCA100 PCA100 2149 +z3_dm365_mod_01 MACH_Z3_DM365_MOD_01 Z3_DM365_MOD_01 2150 +hipox MACH_HIPOX HIPOX 2151 +omap3_piteds MACH_OMAP3_PITEDS OMAP3_PITEDS 2152 +bm150r MACH_BM150R BM150R 2153 +tbone MACH_TBONE TBONE 2154 +merlin MACH_MERLIN MERLIN 2155 +falcon MACH_FALCON FALCON 2156 +davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157 +s5p6440 MACH_S5P6440 S5P6440 2158 +at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159 +omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160 +lpc313x MACH_LPC313X LPC313X 2161 +magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162 +magx_em30 MACH_MAGX_EM30 MAGX_EM30 2163 +magx_ve66 MACH_MAGX_VE66 MAGX_VE66 2164 +meesc MACH_MEESC MEESC 2165 +otc570 MACH_OTC570 OTC570 2166 +bcu2412 MACH_BCU2412 BCU2412 2167 +beacon MACH_BEACON BEACON 2168 +actia_tgw MACH_ACTIA_TGW ACTIA_TGW 2169 +e4430 MACH_E4430 E4430 2170 +ql300 MACH_QL300 QL300 2171 +btmavb101 MACH_BTMAVB101 BTMAVB101 2172 +btmawb101 MACH_BTMAWB101 BTMAWB101 2173 +sq201 MACH_SQ201 SQ201 2174 +quatro45xx MACH_QUATRO45XX QUATRO45XX 2175 +openpad MACH_OPENPAD OPENPAD 2176 +tx25 MACH_TX25 TX25 2177 +omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178 +htcraphael_k MACH_HTCRAPHAEL_K HTCRAPHAEL_K 2179 +lal43 MACH_LAL43 LAL43 2181 +htcraphael_cdma500 MACH_HTCRAPHAEL_CDMA500 HTCRAPHAEL_CDMA500 2182 +anw6410 MACH_ANW6410 ANW6410 2183 +htcprophet MACH_HTCPROPHET HTCPROPHET 2185 +cfa_10022 MACH_CFA_10022 CFA_10022 2186 +imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187 +px2imx27 MACH_PX2IMX27 PX2IMX27 2188 +stm3210e_eval MACH_STM3210E_EVAL STM3210E_EVAL 2189 +dvs10 MACH_DVS10 DVS10 2190 +portuxg20 MACH_PORTUXG20 PORTUXG20 2191 +arm_spv MACH_ARM_SPV ARM_SPV 2192 +smdkc110 MACH_SMDKC110 SMDKC110 2193 +cabespresso MACH_CABESPRESSO CABESPRESSO 2194 +hmc800 MACH_HMC800 HMC800 2195 +sholes MACH_SHOLES SHOLES 2196 +btmxc31 MACH_BTMXC31 BTMXC31 2197 +dt501 MACH_DT501 DT501 2198 +ktx MACH_KTX KTX 2199 +omap3517evm MACH_OMAP3517EVM OMAP3517EVM 2200 +netspace_v2 MACH_NETSPACE_V2 NETSPACE_V2 2201 +netspace_max_v2 MACH_NETSPACE_MAX_V2 NETSPACE_MAX_V2 2202 +d2net_v2 MACH_D2NET_V2 D2NET_V2 2203 +net2big_v2 MACH_NET2BIG_V2 NET2BIG_V2 2204 +net4big_v2 MACH_NET4BIG_V2 NET4BIG_V2 2205 +net5big_v2 MACH_NET5BIG_V2 NET5BIG_V2 2206 +endb2443 MACH_ENDB2443 ENDB2443 2207 +inetspace_v2 MACH_INETSPACE_V2 INETSPACE_V2 2208 +tros MACH_TROS TROS 2209 +pelco_homer MACH_PELCO_HOMER PELCO_HOMER 2210 +ofsp8 MACH_OFSP8 OFSP8 2211 +at91sam9g45ekes MACH_AT91SAM9G45EKES AT91SAM9G45EKES 2212 +guf_cupid MACH_GUF_CUPID GUF_CUPID 2213 +eab1r MACH_EAB1R EAB1R 2214 +desirec MACH_DESIREC DESIREC 2215 +cordoba MACH_CORDOBA CORDOBA 2216 +irvine MACH_IRVINE IRVINE 2217 +sff772 MACH_SFF772 SFF772 2218 +pelco_milano MACH_PELCO_MILANO PELCO_MILANO 2219 +pc7302 MACH_PC7302 PC7302 2220 +bip6000 MACH_BIP6000 BIP6000 2221 +silvermoon MACH_SILVERMOON SILVERMOON 2222 +vc0830 MACH_VC0830 VC0830 2223 +dt430 MACH_DT430 DT430 2224 +ji42pf MACH_JI42PF JI42PF 2225 +gnet_ksm MACH_GNET_KSM GNET_KSM 2226 +gnet_sgm MACH_GNET_SGM GNET_SGM 2227 +gnet_sgr MACH_GNET_SGR GNET_SGR 2228 +omap3_icetekevm MACH_OMAP3_ICETEKEVM OMAP3_ICETEKEVM 2229 +pnp MACH_PNP PNP 2230 +ctera_2bay_k MACH_CTERA_2BAY_K CTERA_2BAY_K 2231 +ctera_2bay_u MACH_CTERA_2BAY_U CTERA_2BAY_U 2232 +sas_c MACH_SAS_C SAS_C 2233 +vma2315 MACH_VMA2315 VMA2315 2234 +vcs MACH_VCS VCS 2235 +spear600 MACH_SPEAR600 SPEAR600 2236 +spear300 MACH_SPEAR300 SPEAR300 2237 +spear1300 MACH_SPEAR1300 SPEAR1300 2238 +lilly1131 MACH_LILLY1131 LILLY1131 2239 +arvoo_ax301 MACH_ARVOO_AX301 ARVOO_AX301 2240 +mapphone MACH_MAPPHONE MAPPHONE 2241 +legend MACH_LEGEND LEGEND 2242 +salsa MACH_SALSA SALSA 2243 +lounge MACH_LOUNGE LOUNGE 2244 +vision MACH_VISION VISION 2245 +vmb20 MACH_VMB20 VMB20 2246 +hy2410 MACH_HY2410 HY2410 2247 +hy9315 MACH_HY9315 HY9315 2248 +bullwinkle MACH_BULLWINKLE BULLWINKLE 2249 +arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250 +vs_v210 MACH_VS_V210 VS_V210 2252 +vs_v212 MACH_VS_V212 VS_V212 2253 +hmt MACH_HMT HMT 2254 +suen3 MACH_SUEN3 SUEN3 2255 +vesper MACH_VESPER VESPER 2256 +str9 MACH_STR9 STR9 2257 +omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258 +simcom MACH_SIMCOM SIMCOM 2259 +mcwebio MACH_MCWEBIO MCWEBIO 2260 |