diff options
Diffstat (limited to 'arch/arm')
77 files changed, 838 insertions, 275 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5959e36..32ba00b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -10,9 +10,9 @@ config ARM default y help The ARM series is a line of low-power-consumption RISC chip designs - licensed by ARM ltd and targeted at embedded applications and + licensed by ARM Ltd and targeted at embedded applications and handhelds such as the Compaq IPAQ. ARM-based PCs are no longer - manufactured, but legacy ARM-based PC hardware remains popular in + manufactured, but legacy ARM-based PC hardware remains popular in Europe. There is an ARM Linux project with a web page at <http://www.arm.linux.org.uk/>. @@ -69,57 +69,77 @@ config GENERIC_ISA_DMA config FIQ bool +config ARCH_MTD_XIP + bool + source "init/Kconfig" menu "System Type" choice prompt "ARM system type" - default ARCH_RPC + default ARCH_VERSATILE config ARCH_CLPS7500 bool "Cirrus-CL-PS7500FE" select TIMER_ACORN select ISA + help + Support for the Cirrus Logic PS7500FE system-on-a-chip. config ARCH_CLPS711X bool "CLPS711x/EP721x-based" + help + Support for Cirrus Logic 711x/721x based boards. config ARCH_CO285 bool "Co-EBSA285" select FOOTBRIDGE select FOOTBRIDGE_ADDIN + help + Support for Intel's EBSA285 companion chip. config ARCH_EBSA110 bool "EBSA-110" select ISA help This is an evaluation board for the StrongARM processor available - from Digital. It has limited hardware on-board, including an onboard + from Digital. It has limited hardware on-board, including an Ethernet interface, two PCMCIA sockets, two serial ports and a parallel port. config ARCH_FOOTBRIDGE bool "FootBridge" select FOOTBRIDGE + help + Support for systems based on the DC21285 companion chip + ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. config ARCH_INTEGRATOR bool "Integrator" select ARM_AMBA select ICST525 + help + Support for ARM's Integrator platform. config ARCH_IOP3XX bool "IOP3xx-based" select PCI + help + Support for Intel's IOP3XX (XScale) family of processors. config ARCH_IXP4XX bool "IXP4xx-based" select DMABOUNCE select PCI + help + Support for Intel's IXP4XX (XScale) family of processors. config ARCH_IXP2000 bool "IXP2400/2800-based" select PCI + help + Support for Intel's IXP2400/2800 (XScale) family of processors. config ARCH_L7200 bool "LinkUp-L7200" @@ -136,6 +156,9 @@ config ARCH_L7200 config ARCH_PXA bool "PXA2xx-based" + select ARCH_MTD_XIP + help + Support for Intel's PXA2XX processor line. config ARCH_RPC bool "RiscPC" @@ -152,19 +175,25 @@ config ARCH_SA1100 bool "SA1100-based" select ISA select ARCH_DISCONTIGMEM_ENABLE + select ARCH_MTD_XIP + help + Support for StrongARM 11x0 based boards. config ARCH_S3C2410 bool "Samsung S3C2410" help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or - the Samsung SMDK2410 development board (and derviatives). + the Samsung SMDK2410 development board (and derivatives). config ARCH_SHARK bool "Shark" select ISA select ISA_DMA select PCI + help + Support for the StrongARM based Digital DNARD machine, also known + as "Shark" (<http://www.shark-linux.de/shark.html>). config ARCH_LH7A40X bool "Sharp LH7A40X" @@ -176,6 +205,8 @@ config ARCH_LH7A40X config ARCH_OMAP bool "TI OMAP" + help + Support for TI's OMAP platform (OMAP1 and OMAP2). config ARCH_VERSATILE bool "Versatile" @@ -194,6 +225,8 @@ config ARCH_REALVIEW config ARCH_IMX bool "IMX" + help + Support for Motorola's i.MX family of processors (MX1, MXL). config ARCH_H720X bool "Hynix-HMS720x-based" @@ -210,8 +243,8 @@ config ARCH_AAEC2000 config ARCH_AT91RM9200 bool "AT91RM9200" help - Say Y here if you intend to run this kernel on an AT91RM9200-based - board. + Say Y here if you intend to run this kernel on an Atmel + AT91RM9200-based board. endchoice @@ -417,8 +450,8 @@ config AEABI To use this you need GCC version 4.0.0 or later. config OABI_COMPAT - bool "Allow old ABI binaries to run with this kernel" - depends on AEABI + bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" + depends on AEABI && EXPERIMENTAL default y help This option preserves the old syscall interface along with the @@ -766,6 +799,8 @@ source "drivers/i2c/Kconfig" source "drivers/spi/Kconfig" +source "drivers/w1/Kconfig" + source "drivers/hwmon/Kconfig" #source "drivers/l3/Kconfig" diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 159ad7e..d31b1cb 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -629,6 +629,22 @@ static int locomo_resume(struct platform_device *dev) } #endif + +#define LCM_ALC_EN 0x8000 + +void frontlight_set(struct locomo *lchip, int duty, int vr, int bpwf) +{ + unsigned long flags; + + spin_lock_irqsave(&lchip->lock, flags); + locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); + udelay(100); + locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD); + locomo_writel(bpwf | LCM_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); + spin_unlock_irqrestore(&lchip->lock, flags); +} + + /** * locomo_probe - probe for a single LoCoMo chip. * @phys_addr: physical address of device. @@ -688,6 +704,11 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) /* FrontLight */ locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD); + + /* Same constants can be used for collie and poodle + (depending on CONFIG options in original sharp code)? */ + frontlight_set(lchip, 163, 0, 148); + /* Longtime timer */ locomo_writel(0, lchip->base + LOCOMO_LTINT); /* SPI */ diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c index 48b1e19..e851d86 100644 --- a/arch/arm/common/rtctime.c +++ b/arch/arm/common/rtctime.c @@ -128,19 +128,27 @@ EXPORT_SYMBOL(rtc_tm_to_time); /* * Calculate the next alarm time given the requested alarm time mask * and the current time. - * - * FIXME: for now, we just copy the alarm time because we're lazy (and - * is therefore buggy - setting a 10am alarm at 8pm will not result in - * the alarm triggering.) */ void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm) { + unsigned long next_time; + unsigned long now_time; + next->tm_year = now->tm_year; next->tm_mon = now->tm_mon; next->tm_mday = now->tm_mday; next->tm_hour = alrm->tm_hour; next->tm_min = alrm->tm_min; next->tm_sec = alrm->tm_sec; + + rtc_tm_to_time(now, &now_time); + rtc_tm_to_time(next, &next_time); + + if (next_time < now_time) { + /* Advance one day */ + next_time += 60 * 60 * 24; + rtc_time_to_tm(next_time, next); + } } static inline int rtc_read_time(struct rtc_ops *ops, struct rtc_time *tm) diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index 5cdd13a..1fe73d1 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index 20838cc..b7d934c 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig index 885a318..94bd993 100644 --- a/arch/arm/configs/csb337_defconfig +++ b/arch/arm/configs/csb337_defconfig @@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig index 95a96a5..1519124 100644 --- a/arch/arm/configs/csb637_defconfig +++ b/arch/arm/configs/csb637_defconfig @@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig index 9592e39..5fdaf3c 100644 --- a/arch/arm/configs/enp2611_defconfig +++ b/arch/arm/configs/enp2611_defconfig @@ -171,7 +171,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" +CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0" # CONFIG_XIP_KERNEL is not set # diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig index d9d6bb8..c67fc44 100644 --- a/arch/arm/configs/ixdp2400_defconfig +++ b/arch/arm/configs/ixdp2400_defconfig @@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" +CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0" # CONFIG_XIP_KERNEL is not set # diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 2dc9d49..60d66e8 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0" # CONFIG_XIP_KERNEL is not set # diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index ea8f4b4..f54f3dc 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware ixdp2x01_clock=50000000" +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0" # CONFIG_XIP_KERNEL is not set # diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 1964ccd..6695b07 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,11 +1,10 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc1 -# Sun Nov 13 17:41:24 2005 +# Linux kernel version: 2.6.16-rc2 +# Mon Feb 6 11:17:23 2006 # CONFIG_ARM=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -28,27 +27,31 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -102,6 +105,7 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_AT91RM9200 is not set # # S3C24XX Implementations @@ -160,7 +164,6 @@ CONFIG_CPU_TLB_V4WBI=y # Bus support # CONFIG_ISA=y -CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -172,6 +175,7 @@ CONFIG_ISA_DMA_API=y # # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set +# CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -214,6 +218,8 @@ CONFIG_BINFMT_AOUT=y # Power management options # CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set CONFIG_APM=y # @@ -259,6 +265,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -276,7 +287,6 @@ CONFIG_TCP_CONG_BIC=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing @@ -300,6 +310,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # CONFIG_MTD=y @@ -412,8 +427,6 @@ CONFIG_PARPORT_1284=y # # Block devices # -# CONFIG_BLK_DEV_XD is not set -# CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -502,7 +515,6 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set CONFIG_DM9000=y @@ -607,11 +619,11 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set -# CONFIG_ESPSERIAL is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set @@ -625,6 +637,7 @@ CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y @@ -687,6 +700,7 @@ CONFIG_S3C2410_RTC=y # # TPM devices # +# CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set # @@ -731,6 +745,12 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Hardware Monitoring support # CONFIG_HWMON=y @@ -863,6 +883,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y CONFIG_INOTIFY=y @@ -897,6 +918,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -965,6 +987,7 @@ CONFIG_SOLARIS_X86_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1020,12 +1043,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1034,6 +1058,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 0abbce8..b324dca 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -57,7 +57,9 @@ int main(void) DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value)); DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate)); DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate)); - DEFINE(TI_IWMMXT_STATE, (offsetof(struct thread_info, fpstate)+4)&~7); +#ifdef CONFIG_IWMMXT + DEFINE(TI_IWMMXT_STATE, offsetof(struct thread_info, fpstate.iwmmxt)); +#endif BLANK(); DEFINE(S_R0, offsetof(struct pt_regs, ARM_r0)); DEFINE(S_R1, offsetof(struct pt_regs, ARM_r1)); diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index d058e7c..3173924 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -111,7 +111,7 @@ CALL(sys_statfs) /* 100 */ CALL(sys_fstatfs) CALL(sys_ni_syscall) - CALL(OBSOLETE(sys_socketcall)) + CALL(OBSOLETE(ABI(sys_socketcall, sys_oabi_socketcall))) CALL(sys_syslog) CALL(sys_setitimer) /* 105 */ CALL(sys_getitimer) @@ -291,21 +291,21 @@ CALL(sys_mq_getsetattr) /* 280 */ CALL(sys_waitid) CALL(sys_socket) - CALL(sys_bind) - CALL(sys_connect) + CALL(ABI(sys_bind, sys_oabi_bind)) + CALL(ABI(sys_connect, sys_oabi_connect)) CALL(sys_listen) /* 285 */ CALL(sys_accept) CALL(sys_getsockname) CALL(sys_getpeername) CALL(sys_socketpair) CALL(sys_send) -/* 290 */ CALL(sys_sendto) +/* 290 */ CALL(ABI(sys_sendto, sys_oabi_sendto)) CALL(sys_recv) CALL(sys_recvfrom) CALL(sys_shutdown) CALL(sys_setsockopt) /* 295 */ CALL(sys_getsockopt) - CALL(sys_sendmsg) + CALL(ABI(sys_sendmsg, sys_oabi_sendmsg)) CALL(sys_recvmsg) CALL(ABI(sys_semop, sys_oabi_semop)) CALL(sys_semget) diff --git a/arch/arm/kernel/compat.c b/arch/arm/kernel/compat.c index 7195add..60cfa7f 100644 --- a/arch/arm/kernel/compat.c +++ b/arch/arm/kernel/compat.c @@ -27,6 +27,8 @@ #include <asm/mach/arch.h> +#include "compat.h" + /* * Usage: * - do not go blindly adding fields, add them at the end diff --git a/arch/arm/kernel/compat.h b/arch/arm/kernel/compat.h new file mode 100644 index 0000000..27e61a6 --- /dev/null +++ b/arch/arm/kernel/compat.h @@ -0,0 +1,13 @@ +/* + * linux/arch/arm/kernel/compat.h + * + * Copyright (C) 2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void convert_to_tag_list(struct tag *tags); + +extern void squash_mem_tags(struct tag *tag); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index d401d90..ec48d70 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -333,10 +333,14 @@ __pabt_svc: @ from the exception stack #if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) +#ifndef CONFIG_MMU +#warning "NPTL on non MMU needs fixing" +#else @ make sure our user space atomic helper is aborted cmp r2, #TASK_SIZE bichs r3, r3, #PSR_Z_BIT #endif +#endif @ @ We are now ready to fill in the remaining blanks on the stack: @@ -562,7 +566,7 @@ ENTRY(__switch_to) ldr r6, [r2, #TI_CPU_DOMAIN]! #endif #if __LINUX_ARM_ARCH__ >= 6 -#ifdef CONFIG_CPU_MPCORE +#ifdef CONFIG_CPU_32v6K clrex #else strex r5, r4, [ip] @ Clear exclusive monitor @@ -705,7 +709,12 @@ __kuser_memory_barrier: @ 0xffff0fa0 * The C flag is also set if *ptr was changed to allow for assembly * optimization in the calling code. * - * Note: this routine already includes memory barriers as needed. + * Notes: + * + * - This routine already includes memory barriers as needed. + * + * - A failure might be transient, i.e. it is possible, although unlikely, + * that "failure" be returned even if *ptr == oldval. * * For example, a user space atomic_add implementation could look like this: * @@ -756,12 +765,18 @@ __kuser_cmpxchg: @ 0xffff0fc0 * exception happening just after the str instruction which would * clear the Z flag although the exchange was done. */ +#ifdef CONFIG_MMU teq ip, ip @ set Z flag ldr ip, [r2] @ load current val add r3, r2, #1 @ prepare store ptr teqeq ip, r0 @ compare with oldval if still allowed streq r1, [r3, #-1]! @ store newval if still allowed subs r0, r2, r3 @ if r2 == r3 the str occured +#else +#warning "NPTL on non MMU needs fixing" + mov r0, #-1 + adds r0, r0, #0 +#endif mov pc, lr #else diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 4b4e4cf..489c069 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -27,6 +27,7 @@ #include <linux/kallsyms.h> #include <linux/init.h> #include <linux/cpu.h> +#include <linux/elfcore.h> #include <asm/leds.h> #include <asm/processor.h> @@ -83,7 +84,7 @@ EXPORT_SYMBOL(pm_power_off); * This is our default idle handler. We need to disable * interrupts here to ensure we don't miss a wakeup call. */ -void default_idle(void) +static void default_idle(void) { if (hlt_counter) cpu_relax(); diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 7b6256b..a1d1b29 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -610,15 +610,12 @@ static int ptrace_setfpregs(struct task_struct *tsk, void __user *ufp) static int ptrace_getwmmxregs(struct task_struct *tsk, void __user *ufp) { struct thread_info *thread = task_thread_info(tsk); - void *ptr = &thread->fpstate; if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT)) return -ENODATA; iwmmxt_task_disable(thread); /* force it to ram */ - /* The iWMMXt state is stored doubleword-aligned. */ - if (((long) ptr) & 4) - ptr += 4; - return copy_to_user(ufp, ptr, 0x98) ? -EFAULT : 0; + return copy_to_user(ufp, &thread->fpstate.iwmmxt, IWMMXT_SIZE) + ? -EFAULT : 0; } /* @@ -627,15 +624,12 @@ static int ptrace_getwmmxregs(struct task_struct *tsk, void __user *ufp) static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp) { struct thread_info *thread = task_thread_info(tsk); - void *ptr = &thread->fpstate; if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT)) return -EACCES; iwmmxt_task_release(thread); /* force a reload */ - /* The iWMMXt state is stored doubleword-aligned. */ - if (((long) ptr) & 4) - ptr += 4; - return copy_from_user(ptr, ufp, 0x98) ? -EFAULT : 0; + return copy_from_user(&thread->fpstate.iwmmxt, ufp, IWMMXT_SIZE) + ? -EFAULT : 0; } #endif diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index c45d10d..08974cb 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -23,6 +23,7 @@ #include <linux/root_dev.h> #include <linux/cpu.h> #include <linux/interrupt.h> +#include <linux/smp.h> #include <asm/cpu.h> #include <asm/elf.h> @@ -36,6 +37,8 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> +#include "compat.h" + #ifndef MEM_SIZE #define MEM_SIZE (16*1024*1024) #endif @@ -52,10 +55,7 @@ static int __init fpe_setup(char *line) __setup("fpe=", fpe_setup); #endif -extern unsigned int mem_fclk_21285; extern void paging_init(struct meminfo *, struct machine_desc *desc); -extern void convert_to_tag_list(struct tag *tags); -extern void squash_mem_tags(struct tag *tag); extern void reboot_setup(char *str); extern int root_mountflags; extern void _stext, _text, _etext, __data_start, _edata, _end; @@ -771,6 +771,10 @@ void __init setup_arch(char **cmdline_p) paging_init(&meminfo, mdesc); request_standard_resources(&meminfo, mdesc); +#ifdef CONFIG_SMP + smp_init_cpus(); +#endif + cpu_init(); /* diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 7338948..02aa300 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -338,7 +338,6 @@ void __init smp_prepare_boot_cpu(void) per_cpu(cpu_data, cpu).idle = current; - cpu_set(cpu, cpu_possible_map); cpu_set(cpu, cpu_present_map); cpu_set(cpu, cpu_online_map); } diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index eafa8e5..8e2f9bc 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -59,6 +59,17 @@ * struct sembuf loses its padding with EABI. Since arrays of them are * used they have to be copyed to remove the padding. Compatibility wrappers * provided below. + * + * sys_bind: + * sys_connect: + * sys_sendmsg: + * sys_sendto: + * sys_socketcall: + * + * struct sockaddr_un loses its padding with EABI. Since the size of the + * structure is used as a validation test in unix_mkname(), we need to + * change the length argument to 110 whenever it is 112. Compatibility + * wrappers provided below. */ #include <linux/syscalls.h> @@ -67,6 +78,8 @@ #include <linux/fcntl.h> #include <linux/eventpoll.h> #include <linux/sem.h> +#include <linux/socket.h> +#include <linux/net.h> #include <asm/ipc.h> #include <asm/uaccess.h> @@ -337,3 +350,91 @@ asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third, return sys_ipc(call, first, second, third, ptr, fifth); } } + +asmlinkage long sys_oabi_bind(int fd, struct sockaddr __user *addr, int addrlen) +{ + sa_family_t sa_family; + if (addrlen == 112 && + get_user(sa_family, &addr->sa_family) == 0 && + sa_family == AF_UNIX) + addrlen = 110; + return sys_bind(fd, addr, addrlen); +} + +asmlinkage long sys_oabi_connect(int fd, struct sockaddr __user *addr, int addrlen) +{ + sa_family_t sa_family; + if (addrlen == 112 && + get_user(sa_family, &addr->sa_family) == 0 && + sa_family == AF_UNIX) + addrlen = 110; + return sys_connect(fd, addr, addrlen); +} + +asmlinkage long sys_oabi_sendto(int fd, void __user *buff, + size_t len, unsigned flags, + struct sockaddr __user *addr, + int addrlen) +{ + sa_family_t sa_family; + if (addrlen == 112 && + get_user(sa_family, &addr->sa_family) == 0 && + sa_family == AF_UNIX) + addrlen = 110; + return sys_sendto(fd, buff, len, flags, addr, addrlen); +} + +asmlinkage long sys_oabi_sendmsg(int fd, struct msghdr __user *msg, unsigned flags) +{ + struct sockaddr __user *addr; + int msg_namelen; + sa_family_t sa_family; + if (msg && + get_user(msg_namelen, &msg->msg_namelen) == 0 && + msg_namelen == 112 && + get_user(addr, &msg->msg_name) == 0 && + get_user(sa_family, &addr->sa_family) == 0 && + sa_family == AF_UNIX) + { + /* + * HACK ALERT: there is a limit to how much backward bending + * we should do for what is actually a transitional + * compatibility layer. This already has known flaws with + * a few ioctls that we don't intend to fix. Therefore + * consider this blatent hack as another one... and take care + * to run for cover. In most cases it will "just work fine". + * If it doesn't, well, tough. + */ + put_user(110, &msg->msg_namelen); + } + return sys_sendmsg(fd, msg, flags); +} + +asmlinkage long sys_oabi_socketcall(int call, unsigned long __user *args) +{ + unsigned long r = -EFAULT, a[6]; + + switch (call) { + case SYS_BIND: + if (copy_from_user(a, args, 3 * sizeof(long)) == 0) + r = sys_oabi_bind(a[0], (struct sockaddr __user *)a[1], a[2]); + break; + case SYS_CONNECT: + if (copy_from_user(a, args, 3 * sizeof(long)) == 0) + r = sys_oabi_connect(a[0], (struct sockaddr __user *)a[1], a[2]); + break; + case SYS_SENDTO: + if (copy_from_user(a, args, 6 * sizeof(long)) == 0) + r = sys_oabi_sendto(a[0], (void __user *)a[1], a[2], a[3], + (struct sockaddr __user *)a[4], a[5]); + break; + case SYS_SENDMSG: + if (copy_from_user(a, args, 3 * sizeof(long)) == 0) + r = sys_oabi_sendmsg(a[0], (struct msghdr __user *)a[1], a[2]); + break; + default: + r = sys_socketcall(call, args); + } + + return r; +} diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index d7d932c..d6bd435 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -422,12 +422,14 @@ static int timer_dyn_tick_disable(void) void timer_dyn_reprogram(void) { struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; + unsigned long next, seq; - if (dyn_tick) { - write_seqlock(&xtime_lock); - if (dyn_tick->state & DYN_TICK_ENABLED) + if (dyn_tick && (dyn_tick->state & DYN_TICK_ENABLED)) { + next = next_timer_interrupt(); + do { + seq = read_seqbegin(&xtime_lock); dyn_tick->reprogram(next_timer_interrupt() - jiffies); - write_sequnlock(&xtime_lock); + } while (read_seqretry(&xtime_lock, seq)); } } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 10235b0..03924bc 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -19,6 +19,7 @@ #include <linux/personality.h> #include <linux/ptrace.h> #include <linux/kallsyms.h> +#include <linux/delay.h> #include <linux/init.h> #include <asm/atomic.h> @@ -231,6 +232,13 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err) __die(str, err, thread, regs); bust_spinlocks(0); spin_unlock_irq(&die_lock); + + if (panic_on_oops) { + printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n"); + ssleep(5); + panic("Fatal exception"); + } + do_exit(SIGSEGV); } diff --git a/arch/arm/lib/muldi3.S b/arch/arm/lib/muldi3.S index 72d5941..d89c606 100644 --- a/arch/arm/lib/muldi3.S +++ b/arch/arm/lib/muldi3.S @@ -29,8 +29,8 @@ ENTRY(__aeabi_lmul) mul xh, yl, xh mla xh, xl, yh, xh - mov ip, xl, asr #16 - mov yh, yl, asr #16 + mov ip, xl, lsr #16 + mov yh, yl, lsr #16 bic xl, xl, ip, lsl #16 bic yl, yl, yh, lsl #16 mla xh, yh, ip, xh diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index 8df3e52..57eedd5 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -100,8 +100,10 @@ void __init at91_add_device_udc(struct at91_udc_data *data) at91_set_gpio_input(data->vbus_pin, 0); at91_set_deglitch(data->vbus_pin, 1); } - if (data->pullup_pin) + if (data->pullup_pin) { at91_set_gpio_output(data->pullup_pin, 0); + at91_set_multi_drive(data->pullup_pin, 1); + } udc_data = *data; platform_device_register(&at91rm9200_udc_device); diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index 2fd2ef5..0e396fe 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -159,6 +159,23 @@ int __init_or_module at91_set_deglitch(unsigned pin, int is_on) } EXPORT_SYMBOL(at91_set_deglitch); +/* + * enable/disable the multi-driver; This is only valid for output and + * allows the output pin to run as an open collector output. + */ +int __init_or_module at91_set_multi_drive(unsigned pin, int is_on) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + + __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR)); + return 0; +} +EXPORT_SYMBOL(at91_set_multi_drive); + /*--------------------------------------------------------------------------*/ @@ -257,8 +274,18 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs gpio = &irq_desc[pin]; while (isr) { - if (isr & 1) - gpio->handle(pin, gpio, regs); + if (isr & 1) { + if (unlikely(gpio->disable_depth)) { + /* + * The core ARM interrupt handler lazily disables IRQs so + * another IRQ must be generated before it actually gets + * here to be disabled on the GPIO controller. + */ + gpio_irq_mask(pin); + } + else + gpio->handle(pin, gpio, regs); + } pin++; gpio++; isr >>= 1; diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 0793dcf..0e2b641 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -24,6 +24,8 @@ config ARCH_CEIVA config ARCH_CLEP7312 bool "CLEP7312" + help + Boards based on the Cirrus Logic 7212/7312 chips. config ARCH_EDB7211 bool "EDB7211" diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index dc31e3f..8ab1b04 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -27,7 +27,6 @@ #include <asm/mach/arch.h> #include <linux/interrupt.h> #include "generic.h" -#include <asm/serial.h> static struct resource cs89x0_resources[] = { [0] = { diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c index ea10bd8..1bc8534 100644 --- a/arch/arm/mach-integrator/platsmp.c +++ b/arch/arm/mach-integrator/platsmp.c @@ -140,6 +140,18 @@ static void __init poke_milo(void) mb(); } +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +void __init smp_init_cpus(void) +{ + unsigned int i, ncores = get_core_count(); + + for (i = 0; i < ncores; i++) + cpu_set(i, cpu_possible_map); +} + void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = get_core_count(); @@ -176,14 +188,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus) max_cpus = ncores; /* - * Initialise the possible/present maps. - * cpu_possible_map describes the set of CPUs which may be present - * cpu_present_map describes the set of CPUs populated + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. */ - for (i = 0; i < max_cpus; i++) { - cpu_set(i, cpu_possible_map); + for (i = 0; i < max_cpus; i++) cpu_set(i, cpu_present_map); - } /* * Do we need any more CPUs? If so, then let them know where diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c index e4f4c52..0ebbcb2 100644 --- a/arch/arm/mach-iop3xx/iop321-setup.c +++ b/arch/arm/mach-iop3xx/iop321-setup.c @@ -13,7 +13,6 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/config.h> -#include <linux/init.h> #include <linux/major.h> #include <linux/fs.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c index 6358548..2d6abe5 100644 --- a/arch/arm/mach-iop3xx/iop331-setup.c +++ b/arch/arm/mach-iop3xx/iop331-setup.c @@ -12,7 +12,6 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/config.h> -#include <linux/init.h> #include <linux/major.h> #include <linux/fs.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 9e5a13b..52fac89 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -106,6 +106,7 @@ static void __init enp2611_pci_preinit(void) { ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000); ixp2000_pci_preinit(); + pcibios_setup("firmware"); } static inline int enp2611_pci_valid_device(struct pci_bus *bus, diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index 7c78240..0910127 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -68,6 +68,7 @@ void __init ixdp2400_pci_preinit(void) { ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000); ixp2000_pci_preinit(); + pcibios_setup("firmware"); } int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys) diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 10f0660..150519f 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -212,6 +212,7 @@ void __init ixdp2x01_pci_preinit(void) { ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000); ixp2000_pci_preinit(); + pcibios_setup("firmware"); } #define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) @@ -299,7 +300,9 @@ struct hw_pci ixdp2x01_pci __initdata = { int __init ixdp2x01_pci_init(void) { - pci_common_init(&ixdp2x01_pci); + if (machine_is_ixdp2401() || machine_is_ixdp2801()) + pci_common_init(&ixdp2x01_pci); + return 0; } diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index daadc78..5bf50a2 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -8,11 +8,9 @@ menu "Intel IXP4xx Implementation Options" comment "IXP4xx Platforms" -# This entry is placed on top because otherwise it would have -# been shown as a submenu. config MACH_NSLU2 bool - prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715) + prompt "Linksys NSLU2" help Say 'Y' here if you want your kernel to support Linksys's NSLU2 NAS device. For more information on this platform, diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 4bdc9d4..fbadf30 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -111,24 +111,30 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) if (line < 0) return -EINVAL; - if (type & IRQT_BOTHEDGE) { + switch (type){ + case IRQT_BOTHEDGE: int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; irq_type = IXP4XX_IRQ_EDGE; - } else if (type & IRQT_RISING) { + break; + case IRQT_RISING: int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; irq_type = IXP4XX_IRQ_EDGE; - } else if (type & IRQT_FALLING) { + break; + case IRQT_FALLING: int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; irq_type = IXP4XX_IRQ_EDGE; - } else if (type & IRQT_HIGH) { + break; + case IRQT_HIGH: int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; irq_type = IXP4XX_IRQ_LEVEL; - } else if (type & IRQT_LOW) { + break; + case IRQT_LOW: int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; irq_type = IXP4XX_IRQ_LEVEL; - } else + break; + default: return -EINVAL; - + } ixp4xx_config_irq(irq, irq_type); if (line >= 8) { /* pins 8-15 */ diff --git a/arch/arm/mach-ixp4xx/nas100d-power.c b/arch/arm/mach-ixp4xx/nas100d-power.c index 2bec69b..99d333d 100644 --- a/arch/arm/mach-ixp4xx/nas100d-power.c +++ b/arch/arm/mach-ixp4xx/nas100d-power.c @@ -56,6 +56,9 @@ static int __init nas100d_power_init(void) static void __exit nas100d_power_exit(void) { + if (!(machine_is_nas100d())) + return; + free_irq(NAS100D_RB_IRQ, NULL); } diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 856d56f..a3b4c6a 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -113,6 +113,9 @@ static void __init nas100d_init(void) { ixp4xx_sys_init(); + /* gpio 14 and 15 are _not_ clocks */ + *IXP4XX_GPIO_GPCLKR = 0; + nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); nas100d_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c index b0ad9e9..d80c362 100644 --- a/arch/arm/mach-ixp4xx/nslu2-power.c +++ b/arch/arm/mach-ixp4xx/nslu2-power.c @@ -77,6 +77,9 @@ static int __init nslu2_power_init(void) static void __exit nslu2_power_exit(void) { + if (!(machine_is_nslu2())) + return; + free_irq(NSLU2_RB_IRQ, NULL); free_irq(NSLU2_PB_IRQ, NULL); } diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index da9340a..55411f2 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -27,8 +27,6 @@ static struct flash_platform_data nslu2_flash_data = { }; static struct resource nslu2_flash_resource = { - .start = NSLU2_FLASH_BASE, - .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, .flags = IORESOURCE_MEM, }; @@ -52,6 +50,12 @@ static struct platform_device nslu2_i2c_controller = { .num_resources = 0, }; +static struct platform_device nslu2_beeper = { + .name = "ixp4xx-beeper", + .id = NSLU2_GPIO_BUZZ, + .num_resources = 0, +}; + static struct resource nslu2_uart_resources[] = { { .start = IXP4XX_UART1_BASE_PHYS, @@ -99,6 +103,7 @@ static struct platform_device *nslu2_devices[] __initdata = { &nslu2_i2c_controller, &nslu2_flash, &nslu2_uart, + &nslu2_beeper, }; static void nslu2_power_off(void) @@ -116,6 +121,10 @@ static void __init nslu2_init(void) { ixp4xx_sys_init(); + nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + nslu2_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + pm_power_off = nslu2_power_off; platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index bdc20b5..a177e78 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -30,6 +30,7 @@ static void __init omap_generic_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); } @@ -104,7 +105,7 @@ static void __init omap_generic_init(void) static void __init omap_generic_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 9533c36..89f0cc7 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -128,6 +128,7 @@ static void __init h2_init_smc91x(void) static void __init h2_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); h2_init_smc91x(); @@ -194,7 +195,7 @@ static void __init h2_init(void) static void __init h2_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } MACHINE_START(OMAP_H2, "TI-H2") diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index d665efc..d9f3862 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -203,6 +203,7 @@ static void __init h3_init_smc91x(void) void h3_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); h3_init_smc91x(); @@ -210,7 +211,7 @@ void h3_init_irq(void) static void __init h3_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 652f37c..a04e433 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -181,6 +181,7 @@ static void __init innovator_init_smc91x(void) void innovator_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); #ifdef CONFIG_ARCH_OMAP15XX @@ -285,7 +286,7 @@ static void __init innovator_init(void) static void __init innovator_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c index 58f7839..60d5f8a 100644 --- a/arch/arm/mach-omap1/board-netstar.c +++ b/arch/arm/mach-omap1/board-netstar.c @@ -65,6 +65,7 @@ static struct omap_board_config_kernel netstar_config[] = { static void __init netstar_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); } @@ -108,7 +109,7 @@ static void __init netstar_init(void) static void __init netstar_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } #define MACHINE_PANICED 1 diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e5d126e..543fa13 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -169,6 +169,7 @@ static void __init osk_init_cf(void) static void __init osk_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); osk_init_smc91x(); @@ -269,7 +270,7 @@ static void __init osk_init(void) static void __init osk_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } MACHINE_START(OMAP_OSK, "TI-OSK") diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 67fada2..e488f72 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -34,6 +34,7 @@ static void __init omap_generic_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); } @@ -72,7 +73,7 @@ static void __init omap_generic_init(void) static void __init omap_generic_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 88708a0..3913a3c 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -144,6 +144,7 @@ static void __init perseus2_init_smc91x(void) void omap_perseus2_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); perseus2_init_smc91x(); @@ -160,7 +161,7 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = { static void __init omap_perseus2_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); iotable_init(omap_perseus2_io_desc, ARRAY_SIZE(omap_perseus2_io_desc)); diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 959b4b8..bfd5fdd 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -162,6 +162,7 @@ static struct omap_board_config_kernel voiceblue_config[] = { static void __init voiceblue_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); } @@ -206,7 +207,7 @@ static void __init voiceblue_init(void) static void __init voiceblue_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } #define MACHINE_PANICED 1 diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index a7a19f7..82d556b 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <asm/tlb.h> #include <asm/mach/map.h> #include <asm/io.h> #include <asm/arch/mux.h> @@ -83,15 +84,24 @@ static struct map_desc omap16xx_io_desc[] __initdata = { }; #endif -static int initialized = 0; - -static void __init _omap_map_io(void) +/* + * Maps common IO regions for omap1. This should only get called from + * board specific init. + */ +void __init omap1_map_common_io(void) { - initialized = 1; - - /* We have to initialize the IO space mapping before we can run - * cpu_is_omapxxx() macros. */ iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc)); + + /* Normally devicemaps_init() would flush caches and tlb after + * mdesc->map_io(), but we must also do it here because of the CPU + * revision check below. + */ + local_flush_tlb_all(); + flush_cache_all(); + + /* We want to check CPU revision early for cpu_is_omapxxxx() macros. + * IO space mapping must be initialized before we can do that. + */ omap_check_revision(); #ifdef CONFIG_ARCH_OMAP730 @@ -111,7 +121,14 @@ static void __init _omap_map_io(void) #endif omap_sram_init(); +} +/* + * Common low-level hardware init for omap1. This should only get called from + * board specific init. + */ +void __init omap1_init_common_hw() +{ /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort * on a Posted Write in the TIPB Bridge". */ @@ -121,16 +138,7 @@ static void __init _omap_map_io(void) /* Must init clocks early to assure that timer interrupt works */ omap1_clk_init(); -} -/* - * This should only get called from board specific init - */ -void __init omap_map_common_io(void) -{ - if (!initialized) { - _omap_map_io(); - omap1_mux_init(); - } + omap1_mux_init(); } diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index b937123..eaecbf4 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -33,6 +33,7 @@ static void __init omap_generic_init_irq(void) { + omap2_init_common_hw(); omap_init_irq(); } @@ -64,7 +65,7 @@ static void __init omap_generic_init(void) static void __init omap_generic_map_io(void) { - omap_map_common_io(); + omap2_map_common_io(); } MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index c3c35d4..a300d63 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -136,6 +136,7 @@ static inline void __init h4_init_smc91x(void) static void __init omap_h4_init_irq(void) { + omap2_init_common_hw(); omap_init_irq(); omap_gpio_init(); h4_init_smc91x(); @@ -181,7 +182,7 @@ static void __init omap_h4_init(void) static void __init omap_h4_map_io(void) { - omap_map_common_io(); + omap2_map_common_io(); } MACHINE_START(OMAP_H4, "OMAP2420 H4 board") diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index b41b1ef..3baa708 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -44,7 +44,7 @@ unsigned int get_clk_frequency_khz( int info) /* Read clkcfg register: it has turbo, b, half-turbo (and f) */ asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) ); - t = clkcfg & (1 << 1); + t = clkcfg & (1 << 0); ht = clkcfg & (1 << 2); b = clkcfg & (1 << 3); diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 4a222f5..4303d98 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -182,7 +182,7 @@ static const struct icst307_params realview_oscvco_params = { static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco) { void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET; - void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC1_OFFSET; + void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; u32 val; val = readl(sys_osc) & ~0x7ffff; diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index a8fbd76d..b8484e1 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -143,6 +143,18 @@ static void __init poke_milo(void) mb(); } +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +void __init smp_init_cpus(void) +{ + unsigned int i, ncores = get_core_count(); + + for (i = 0; i < ncores; i++) + cpu_set(i, cpu_possible_map); +} + void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = get_core_count(); @@ -179,14 +191,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus) local_timer_setup(cpu); /* - * Initialise the possible/present maps. - * cpu_possible_map describes the set of CPUs which may be present - * cpu_present_map describes the set of CPUs populated + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. */ - for (i = 0; i < max_cpus; i++) { - cpu_set(i, cpu_possible_map); + for (i = 0; i < max_cpus; i++) cpu_set(i, cpu_present_map); - } /* * Do we need any more CPUs? If so, then let them know where diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index b4f1e05..1217bf0 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -10,9 +10,13 @@ obj-m := obj-n := obj- := +# S3C2400 support files +obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o + # S3C2410 support files obj-$(CONFIG_CPU_S3C2410) += s3c2410.o +obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o obj-$(CONFIG_S3C2410_DMA) += dma.o # Power Management support @@ -25,6 +29,7 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o +obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o # bast extras diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index af2f3d5..08489ef 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -40,7 +40,6 @@ #include <linux/mutex.h> #include <asm/hardware.h> -#include <asm/atomic.h> #include <asm/irq.h> #include <asm/io.h> @@ -59,22 +58,18 @@ static DEFINE_MUTEX(clocks_mutex); void inline s3c24xx_clk_enable(unsigned int clocks, unsigned int enable) { unsigned long clkcon; - unsigned long flags; - - local_irq_save(flags); clkcon = __raw_readl(S3C2410_CLKCON); - clkcon &= ~clocks; if (enable) clkcon |= clocks; + else + clkcon &= ~clocks; /* ensure none of the special function bits set */ clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER); __raw_writel(clkcon, S3C2410_CLKCON); - - local_irq_restore(flags); } /* enable and disable calls for use with the clk struct */ @@ -138,16 +133,32 @@ void clk_put(struct clk *clk) int clk_enable(struct clk *clk) { - if (IS_ERR(clk)) + if (IS_ERR(clk) || clk == NULL) return -EINVAL; - return (clk->enable)(clk, 1); + clk_enable(clk->parent); + + mutex_lock(&clocks_mutex); + + if ((clk->usage++) == 0) + (clk->enable)(clk, 1); + + mutex_unlock(&clocks_mutex); + return 0; } void clk_disable(struct clk *clk) { - if (!IS_ERR(clk)) + if (IS_ERR(clk) || clk == NULL) + return; + + mutex_lock(&clocks_mutex); + + if ((--clk->usage) == 0) (clk->enable)(clk, 0); + + mutex_unlock(&clocks_mutex); + clk_disable(clk->parent); } @@ -361,6 +372,14 @@ int s3c24xx_register_clock(struct clk *clk) if (clk->enable == NULL) clk->enable = clk_null_enable; + /* if this is a standard clock, set the usage state */ + + if (clk->ctrlbit) { + unsigned long clkcon = __raw_readl(S3C2410_CLKCON); + + clk->usage = (clkcon & clk->ctrlbit) ? 1 : 0; + } + /* add to the list of available clocks */ mutex_lock(&clocks_mutex); @@ -402,6 +421,8 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, * the LCD clock if it is not needed. */ + mutex_lock(&clocks_mutex); + s3c24xx_clk_enable(S3C2410_CLKCON_NAND, 0); s3c24xx_clk_enable(S3C2410_CLKCON_USBH, 0); s3c24xx_clk_enable(S3C2410_CLKCON_USBD, 0); @@ -409,6 +430,8 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, s3c24xx_clk_enable(S3C2410_CLKCON_IIC, 0); s3c24xx_clk_enable(S3C2410_CLKCON_SPI, 0); + mutex_unlock(&clocks_mutex); + /* assume uart clocks are correctly setup */ /* register our clocks */ diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h index 177d5c8..eb5c95d 100644 --- a/arch/arm/mach-s3c2410/clock.h +++ b/arch/arm/mach-s3c2410/clock.h @@ -16,6 +16,7 @@ struct clk { struct clk *parent; const char *name; int id; + int usage; unsigned long rate; unsigned long ctrlbit; int (*enable)(struct clk *, int enable); diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c index 687fe37..00a3793 100644 --- a/arch/arm/mach-s3c2410/cpu.c +++ b/arch/arm/mach-s3c2410/cpu.c @@ -40,6 +40,7 @@ #include "cpu.h" #include "clock.h" +#include "s3c2400.h" #include "s3c2410.h" #include "s3c2440.h" @@ -55,6 +56,7 @@ struct cpu_table { /* table of supported CPUs */ +static const char name_s3c2400[] = "S3C2400"; static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2410a[] = "S3C2410A"; @@ -96,7 +98,16 @@ static struct cpu_table cpu_ids[] __initdata = { .init_uarts = s3c2440_init_uarts, .init = s3c2440_init, .name = name_s3c2440a - } + }, + { + .idcode = 0x0, /* S3C2400 doesn't have an idcode */ + .idmask = 0xffffffff, + .map_io = s3c2400_map_io, + .init_clocks = s3c2400_init_clocks, + .init_uarts = s3c2400_init_uarts, + .init = s3c2400_init, + .name = name_s3c2400 + }, }; /* minimal IO mapping */ @@ -148,12 +159,15 @@ static struct cpu_table *cpu; void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { - unsigned long idcode; + unsigned long idcode = 0x0; /* initialise the io descriptors we need for initialisation */ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); +#ifndef CONFIG_CPU_S3C2400 idcode = __raw_readl(S3C2410_GSTATUS1); +#endif + cpu = s3c_lookup_cpu(idcode); if (cpu == NULL) { diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index b8d994a..ca09ba5 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -275,6 +275,11 @@ static struct resource s3c_adc_resource[] = { }, [1] = { .start = IRQ_TC, + .end = IRQ_TC, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_ADC, .end = IRQ_ADC, .flags = IORESOURCE_IRQ, } @@ -329,11 +334,17 @@ static struct resource s3c_spi0_resource[] = { }; +static u64 s3c_device_spi0_dmamask = 0xffffffffUL; + struct platform_device s3c_device_spi0 = { .name = "s3c2410-spi", .id = 0, .num_resources = ARRAY_SIZE(s3c_spi0_resource), .resource = s3c_spi0_resource, + .dev = { + .dma_mask = &s3c_device_spi0_dmamask, + .coherent_dma_mask = 0xffffffffUL + } }; EXPORT_SYMBOL(s3c_device_spi0); @@ -354,11 +365,17 @@ static struct resource s3c_spi1_resource[] = { }; +static u64 s3c_device_spi1_dmamask = 0xffffffffUL; + struct platform_device s3c_device_spi1 = { .name = "s3c2410-spi", .id = 1, .num_resources = ARRAY_SIZE(s3c_spi1_resource), .resource = s3c_spi1_resource, + .dev = { + .dma_mask = &s3c_device_spi1_dmamask, + .coherent_dma_mask = 0xffffffffUL + } }; EXPORT_SYMBOL(s3c_device_spi1); diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index 23ea3d5..cd39e86 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -31,6 +31,7 @@ * 05-Nov-2004 BJD EXPORT_SYMBOL() added for all code * 13-Mar-2005 BJD Updates for __iomem * 26-Oct-2005 BJD Added generic configuration types + * 15-Jan-2006 LCVR Added support for the S3C2400 */ @@ -48,7 +49,7 @@ void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) { - void __iomem *base = S3C2410_GPIO_BASE(pin); + void __iomem *base = S3C24XX_GPIO_BASE(pin); unsigned long mask; unsigned long con; unsigned long flags; @@ -95,7 +96,7 @@ EXPORT_SYMBOL(s3c2410_gpio_cfgpin); unsigned int s3c2410_gpio_getcfg(unsigned int pin) { - void __iomem *base = S3C2410_GPIO_BASE(pin); + void __iomem *base = S3C24XX_GPIO_BASE(pin); unsigned long mask; if (pin < S3C2410_GPIO_BANKB) { @@ -111,7 +112,7 @@ EXPORT_SYMBOL(s3c2410_gpio_getcfg); void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) { - void __iomem *base = S3C2410_GPIO_BASE(pin); + void __iomem *base = S3C24XX_GPIO_BASE(pin); unsigned long offs = S3C2410_GPIO_OFFSET(pin); unsigned long flags; unsigned long up; @@ -133,7 +134,7 @@ EXPORT_SYMBOL(s3c2410_gpio_pullup); void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) { - void __iomem *base = S3C2410_GPIO_BASE(pin); + void __iomem *base = S3C24XX_GPIO_BASE(pin); unsigned long offs = S3C2410_GPIO_OFFSET(pin); unsigned long flags; unsigned long dat; @@ -152,7 +153,7 @@ EXPORT_SYMBOL(s3c2410_gpio_setpin); unsigned int s3c2410_gpio_getpin(unsigned int pin) { - void __iomem *base = S3C2410_GPIO_BASE(pin); + void __iomem *base = S3C24XX_GPIO_BASE(pin); unsigned long offs = S3C2410_GPIO_OFFSET(pin); return __raw_readl(base + 0x04) & (1<< offs); @@ -166,70 +167,13 @@ unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) unsigned long misccr; local_irq_save(flags); - misccr = __raw_readl(S3C2410_MISCCR); + misccr = __raw_readl(S3C24XX_MISCCR); misccr &= ~clear; misccr ^= change; - __raw_writel(misccr, S3C2410_MISCCR); + __raw_writel(misccr, S3C24XX_MISCCR); local_irq_restore(flags); return misccr; } EXPORT_SYMBOL(s3c2410_modify_misccr); - -int s3c2410_gpio_getirq(unsigned int pin) -{ - if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15_EINT23) - return -1; /* not valid interrupts */ - - if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7) - return -1; /* not valid pin */ - - if (pin < S3C2410_GPF4) - return (pin - S3C2410_GPF0) + IRQ_EINT0; - - if (pin < S3C2410_GPG0) - return (pin - S3C2410_GPF4) + IRQ_EINT4; - - return (pin - S3C2410_GPG0) + IRQ_EINT8; -} - -EXPORT_SYMBOL(s3c2410_gpio_getirq); - -int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config) -{ - void __iomem *reg = S3C2410_EINFLT0; - unsigned long flags; - unsigned long val; - - if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15) - return -1; - - config &= 0xff; - - pin -= S3C2410_GPG8_EINT16; - reg += pin & ~3; - - local_irq_save(flags); - - /* update filter width and clock source */ - - val = __raw_readl(reg); - val &= ~(0xff << ((pin & 3) * 8)); - val |= config << ((pin & 3) * 8); - __raw_writel(val, reg); - - /* update filter enable */ - - val = __raw_readl(S3C2410_EXTINT2); - val &= ~(1 << ((pin * 4) + 3)); - val |= on << ((pin * 4) + 3); - __raw_writel(val, S3C2410_EXTINT2); - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_gpio_irqfilter); diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 1c316f1..646a3a5 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -46,10 +46,11 @@ #include <asm/irq.h> #include <asm/mach-types.h> -//#include <asm/debug-ll.h> + #include <asm/arch/regs-serial.h> #include <asm/arch/regs-lcd.h> +#include <asm/arch/h1940-latch.h> #include <asm/arch/fb.h> #include <linux/serial_core.h> @@ -59,7 +60,12 @@ #include "cpu.h" static struct map_desc h1940_iodesc[] __initdata = { - /* nothing here yet */ + [0] = { + .virtual = (unsigned long)H1940_LATCH, + .pfn = __phys_to_pfn(H1940_PA_LATCH), + .length = SZ_16K, + .type = MT_DEVICE + }, }; #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK @@ -92,6 +98,25 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] = { } }; +/* Board control latch control */ + +static unsigned int latch_state = H1940_LATCH_DEFAULT; + +void h1940_latch_control(unsigned int clear, unsigned int set) +{ + unsigned long flags; + + local_irq_save(flags); + + latch_state &= ~clear; + latch_state |= set; + + __raw_writel(latch_state, H1940_LATCH); + + local_irq_restore(flags); +} + +EXPORT_SYMBOL_GPL(h1940_latch_control); /** diff --git a/arch/arm/mach-s3c2410/s3c2400-gpio.c b/arch/arm/mach-s3c2410/s3c2400-gpio.c new file mode 100644 index 0000000..5127f39 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2400-gpio.c @@ -0,0 +1,45 @@ +/* linux/arch/arm/mach-s3c2410/gpio.c + * + * Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org> + * + * S3C2400 GPIO support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Changelog + * 15-Jan-2006 LCVR Splitted from gpio.c, adding support for the S3C2400 + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/arch/regs-gpio.h> + +int s3c2400_gpio_getirq(unsigned int pin) +{ + if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7) + return -1; /* not valid interrupts */ + + return (pin - S3C2410_GPE0) + IRQ_EINT0; +} + +EXPORT_SYMBOL(s3c2400_gpio_getirq); diff --git a/arch/arm/mach-s3c2410/s3c2400.h b/arch/arm/mach-s3c2410/s3c2400.h new file mode 100644 index 0000000..8b2394e --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2400.h @@ -0,0 +1,31 @@ +/* arch/arm/mach-s3c2410/s3c2400.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for S3C2400 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 09-Fev-2006 LCVR First version, based on s3c2410.h +*/ + +#ifdef CONFIG_CPU_S3C2400 + +extern int s3c2400_init(void); + +extern void s3c2400_map_io(struct map_desc *mach_desc, int size); + +extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2400_init_clocks(int xtal); + +#else +#define s3c2400_init_clocks NULL +#define s3c2400_init_uarts NULL +#define s3c2400_map_io NULL +#define s3c2400_init NULL +#endif diff --git a/arch/arm/mach-s3c2410/s3c2410-gpio.c b/arch/arm/mach-s3c2410/s3c2410-gpio.c new file mode 100644 index 0000000..d5e1cae --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2410-gpio.c @@ -0,0 +1,93 @@ +/* linux/arch/arm/mach-s3c2410/gpio.c + * + * Copyright (c) 2004-2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 GPIO support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Changelog + * 15-Jan-2006 LCVR Splitted from gpio.c + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/arch/regs-gpio.h> + +int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, + unsigned int config) +{ + void __iomem *reg = S3C2410_EINFLT0; + unsigned long flags; + unsigned long val; + + if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15) + return -1; + + config &= 0xff; + + pin -= S3C2410_GPG8_EINT16; + reg += pin & ~3; + + local_irq_save(flags); + + /* update filter width and clock source */ + + val = __raw_readl(reg); + val &= ~(0xff << ((pin & 3) * 8)); + val |= config << ((pin & 3) * 8); + __raw_writel(val, reg); + + /* update filter enable */ + + val = __raw_readl(S3C2410_EXTINT2); + val &= ~(1 << ((pin * 4) + 3)); + val |= on << ((pin * 4) + 3); + __raw_writel(val, S3C2410_EXTINT2); + + local_irq_restore(flags); + + return 0; +} + +EXPORT_SYMBOL(s3c2410_gpio_irqfilter); + +int s3c2410_gpio_getirq(unsigned int pin) +{ + if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15_EINT23) + return -1; /* not valid interrupts */ + + if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7) + return -1; /* not valid pin */ + + if (pin < S3C2410_GPF4) + return (pin - S3C2410_GPF0) + IRQ_EINT0; + + if (pin < S3C2410_GPG0) + return (pin - S3C2410_GPF4) + IRQ_EINT4; + + return (pin - S3C2410_GPG0) + IRQ_EINT8; +} + +EXPORT_SYMBOL(s3c2410_gpio_getirq); diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S index e9a055b..832fb86 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c2410/sleep.S @@ -72,7 +72,7 @@ ENTRY(s3c2410_cpu_suspend) @@ prepare cpu to sleep ldr r4, =S3C2410_REFRESH - ldr r5, =S3C2410_MISCCR + ldr r5, =S3C24XX_MISCCR ldr r6, =S3C2410_CLKCON ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index b80d57d..722fbab 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -240,6 +240,14 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) int i; int myslot = -1; unsigned long val; + void __iomem *local_pci_cfg_base; + + val = __raw_readl(SYS_PCICTL); + if (!(val & 1)) { + printk("Not plugged into PCI backplane!\n"); + ret = -EIO; + goto out; + } if (nr == 0) { sys->mem_offset = 0; @@ -253,48 +261,45 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) goto out; } - __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28,PCI_IMAP0); - __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28,PCI_IMAP1); - __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28,PCI_IMAP2); - - __raw_writel(1, SYS_PCICTL); - - val = __raw_readl(SYS_PCICTL); - if (!(val & 1)) { - printk("Not plugged into PCI backplane!\n"); - ret = -EIO; - goto out; - } - /* * We need to discover the PCI core first to configure itself * before the main PCI probing is performed */ - for (i=0; i<32; i++) { + for (i=0; i<32; i++) if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) && (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) { myslot = i; - - __raw_writel(myslot, PCI_SELFID); - val = __raw_readl(VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET); - val |= (1<<2); - __raw_writel(val, VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET); break; } - } if (myslot == -1) { printk("Cannot find PCI core!\n"); ret = -EIO; - } else { - printk("PCI core found (slot %d)\n",myslot); - /* Do not to map Versatile FPGA PCI device - into memory space as we are short of - mappable memory */ - pci_slot_ignore |= (1 << myslot); - ret = 1; + goto out; } + printk("PCI core found (slot %d)\n",myslot); + + __raw_writel(myslot, PCI_SELFID); + local_pci_cfg_base = (void *) VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11); + + val = __raw_readl(local_pci_cfg_base + CSR_OFFSET); + val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; + __raw_writel(val, local_pci_cfg_base + CSR_OFFSET); + + /* + * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM + */ + __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0); + __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1); + __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2); + + /* + * Do not to map Versatile FPGA PCI device into memory space + */ + pci_slot_ignore |= (1 << myslot); + ret = 1; + out: return ret; } @@ -305,18 +310,18 @@ struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys) return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys); } -/* - * V3_LB_BASE? - local bus address - * V3_LB_MAP? - pci bus address - */ void __init pci_versatile_preinit(void) { -} + __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0); + __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1); + __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2); -void __init pci_versatile_postinit(void) -{ -} + __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP0); + __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP1); + __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP2); + __raw_writel(1, SYS_PCICTL); +} /* * map the specified device/slot/pin to an IRQ. Different backplanes may need to modify this. @@ -326,16 +331,15 @@ static int __init versatile_map_irq(struct pci_dev *dev, u8 slot, u8 pin) int irq; int devslot = PCI_SLOT(dev->devfn); - /* slot, pin, irq - 24 1 27 - 25 1 28 untested - 26 1 29 - 27 1 30 untested - */ - - irq = 27 + ((slot + pin + 2) % 3); /* Fudged */ + /* slot, pin, irq + * 24 1 27 + * 25 1 28 + * 26 1 29 + * 27 1 30 + */ + irq = 27 + ((slot + pin - 1) & 3); - printk("map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq); + printk("PCI map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq); return irq; } @@ -347,7 +351,6 @@ static struct hw_pci versatile_pci __initdata = { .setup = pci_versatile_setup, .scan = pci_versatile_scan_bus, .preinit = pci_versatile_preinit, - .postinit = pci_versatile_postinit, }; static int __init versatile_pci_init(void) diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index dbd3460..8a7f65b 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -20,7 +20,7 @@ */ .align 5 ENTRY(v6_early_abort) -#ifdef CONFIG_CPU_MPCORE +#ifdef CONFIG_CPU_32v6K clrex #else strex r0, r1, [sp] @ Clear the exclusive monitor diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 72966d9..2c6c2a7 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -92,25 +92,20 @@ ENTRY(v6_coherent_kern_range) * - the Icache does not read data from the write buffer */ ENTRY(v6_coherent_user_range) - bic r0, r0, #CACHE_LINE_SIZE - 1 -1: + #ifdef HARVARD_CACHE - mcr p15, 0, r0, c7, c10, 1 @ clean D line - mcr p15, 0, r0, c7, c5, 1 @ invalidate I line -#endif - mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry - add r0, r0, #BTB_FLUSH_SIZE - mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry - add r0, r0, #BTB_FLUSH_SIZE - mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry - add r0, r0, #BTB_FLUSH_SIZE - mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry - add r0, r0, #BTB_FLUSH_SIZE + bic r0, r0, #CACHE_LINE_SIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D line + add r0, r0, #CACHE_LINE_SIZE cmp r0, r1 blo 1b -#ifdef HARVARD_CACHE +#endif mov r0, #0 +#ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate +#else + mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB #endif mov pc, lr diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 330695b..b103e56 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -24,14 +24,16 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) { unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT); + const int zero = 0; set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL)); flush_tlb_kernel_page(to); asm( "mcrr p15, 0, %1, %0, c14\n" - " mcrr p15, 0, %1, %0, c5\n" + " mcr p15, 0, %2, c7, c10, 4\n" + " mcr p15, 0, %2, c7, c5, 0\n" : - : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES) + : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero) : "cc"); } diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 861b3594..2d3823e 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -241,7 +241,15 @@ ENTRY(xscale_flush_user_cache_range) * it also trashes the mini I-cache used by JTAG debuggers. */ ENTRY(xscale_coherent_kern_range) - /* FALLTHROUGH */ + bic r0, r0, #CACHELINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer + mov pc, lr /* * coherent_user_range(start, end) @@ -252,18 +260,16 @@ ENTRY(xscale_coherent_kern_range) * * - start - virtual start address * - end - virtual end address - * - * Note: single I-cache line invalidation isn't used here since - * it also trashes the mini I-cache used by JTAG debuggers. */ ENTRY(xscale_coherent_user_range) bic r0, r0, #CACHELINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + mcr p15, 0, r0, c7, c5, 1 @ Invalidate I cache entry add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b mov r0, #0 - mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, r0, c7, c5, 6 @ Invalidate BTB mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer mov pc, lr diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index 6f76b89..fd6adde 100644 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -80,6 +80,7 @@ ENTRY(v6wbi_flush_kern_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b + mcr p15, 0, r2, c7, c10, 4 @ data synchronization barrier mov pc, lr .section ".text.init", #alloc, #execinstr diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 1415930..6f8bc1f 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -137,8 +137,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) if (spec) { init_MUTEX(&op_arm_sem); - if (spec->init() < 0) - return -ENODEV; + ret = spec->init(); + if (ret < 0) + return ret; op_arm_model = spec; init_driverfs(); diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c index 1a24e2c..093efd7 100644 --- a/arch/arm/plat-omap/pm.c +++ b/arch/arm/plat-omap/pm.c @@ -38,7 +38,6 @@ #include <linux/pm.h> #include <linux/sched.h> #include <linux/proc_fs.h> -#include <linux/pm.h> #include <linux/interrupt.h> #include <asm/io.h> diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 792f663..ee82763 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <asm/mach/map.h> +#include <asm/tlb.h> #include <asm/io.h> #include <asm/cacheflush.h> @@ -96,6 +97,14 @@ void __init omap_map_sram(void) omap_sram_io_desc[0].length); /* + * Normally devicemaps_init() would flush caches and tlb after + * mdesc->map_io(), but since we're called from map_io(), we + * must do it here. + */ + local_flush_tlb_all(); + flush_cache_all(); + + /* * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... */ diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index d0f9bb5..8ab5300 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon Jan 9 12:56:42 2006 +# Last update: Mon Feb 20 10:18:02 2006 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -904,7 +904,7 @@ wg302v2 MACH_WG302V2 WG302V2 890 eb42x MACH_EB42X EB42X 891 iq331es MACH_IQ331ES IQ331ES 892 cosydsp MACH_COSYDSP COSYDSP 893 -uplat7d MACH_UPLAT7D UPLAT7D 894 +uplat7d_proto MACH_UPLAT7D UPLAT7D 894 ptdavinci MACH_PTDAVINCI PTDAVINCI 895 mbus MACH_MBUS MBUS 896 nadia2vb MACH_NADIA2VB NADIA2VB 897 @@ -938,3 +938,34 @@ auckland MACH_AUCKLAND AUCKLAND 924 ak3220m MACH_AK3320M AK3320M 925 duramax MACH_DURAMAX DURAMAX 926 n35 MACH_N35 N35 927 +pronghorn MACH_PRONGHORN PRONGHORN 928 +fundy MACH_FUNDY FUNDY 929 +logicpd_pxa270 MACH_LOGICPD_PXA270 LOGICPD_PXA270 930 +cpu777 MACH_CPU777 CPU777 931 +simicon9201 MACH_SIMICON9201 SIMICON9201 932 +leap2_hpm MACH_LEAP2_HPM LEAP2_HPM 933 +cm922txa10 MACH_CM922TXA10 CM922TXA10 934 +sandgate MACH_PXA PXA 935 +sandgate2 MACH_SANDGATE2 SANDGATE2 936 +sandgate2g MACH_SANDGATE2G SANDGATE2G 937 +sandgate2p MACH_SANDGATE2P SANDGATE2P 938 +fred_jack MACH_FRED_JACK FRED_JACK 939 +ttg_color1 MACH_TTG_COLOR1 TTG_COLOR1 940 +nxeb500hmi MACH_NXEB500HMI NXEB500HMI 941 +netdcu8 MACH_NETDCU8 NETDCU8 942 +ml675050_cpu_boa MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943 +ng_fvx538 MACH_NG_FVX538 NG_FVX538 944 +ng_fvs338 MACH_NG_FVS338 NG_FVS338 945 +pnx4103 MACH_PNX4103 PNX4103 946 +hesdb MACH_HESDB HESDB 947 +xsilo MACH_XSILO XSILO 948 +espresso MACH_ESPRESSO ESPRESSO 949 +emlc MACH_EMLC EMLC 950 +sisteron MACH_SISTERON SISTERON 951 +rx1950 MACH_RX1950 RX1950 952 +tsc_venus MACH_TSC_VENUS TSC_VENUS 953 +ds101j MACH_DS101J DS101J 954 +mxc300_30ads MACH_MXC30030ADS MXC30030ADS 955 +fujitsu_wimaxsoc MACH_FUJITSU_WIMAXSOC FUJITSU_WIMAXSOC 956 +dualpcmodem MACH_DUALPCMODEM DUALPCMODEM 957 +gesbc9312 MACH_GESBC9312 GESBC9312 958 |
