diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/boot/dts/Makefile | 3 | ||||
-rw-r--r-- | arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi | 186 | ||||
-rw-r--r-- | arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts | 57 | ||||
-rw-r--r-- | arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts | 116 | ||||
-rw-r--r-- | arch/arm/boot/dts/kirkwood-linkstation.dtsi (renamed from arch/arm/boot/dts/kirkwood-lswxl.dts) | 149 |
5 files changed, 369 insertions, 142 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a4a6d70..6771d0b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -189,9 +189,10 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-is2.dtb \ kirkwood-km_kirkwood.dtb \ kirkwood-laplug.dtb \ + kirkwood-linkstation-lswsxl.dtb \ + kirkwood-linkstation-lswxl.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lswvl.dtb \ - kirkwood-lswxl.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ kirkwood-mv88f6281gtw-ge.dtb \ diff --git a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi new file mode 100644 index 0000000..cf2e69f --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi @@ -0,0 +1,186 @@ +/* + * Device Tree common file for kirkwood-6281 based 2-Bay Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include "kirkwood-linkstation.dtsi" + +/ { + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd0: pmx-power-hdd0 { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function-red { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + }; + + sata@80000 { + nr-ports = <2>; + }; + }; + + gpio_keys { + function-button { + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + power-on-switch { + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + + power-auto-switch { + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + red-alarm-led { + label = "linkstation:red:alarm"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; + + red-function-led { + label = "linkstation:red:function"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + amber-info-led { + label = "linkstation:amber:info"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + }; + + blue-function-led { + label = "linkstation:blue:function"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + + blue-power-led { + label = "linkstation:blue:power"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + regulators { + pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; + + usb_power: regulator@1 { + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + + hdd_power0: regulator@2 { + gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; + + hdd_power1: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "HDD1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy1: ethernet-phy@8 { + device_type = "ethernet-phy"; + reg = <8>; + }; +}; + +ð1 { + status = "okay"; + + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts new file mode 100644 index 0000000..4b64501 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts @@ -0,0 +1,57 @@ +/* + * Device Tree file for Buffalo Linkstation LS-WSXL + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-duo-6281.dtsi" + +/ { + model = "Buffalo Linkstation LS-WSXL"; + compatible = "buffalo,lswsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts new file mode 100644 index 0000000..ecd5c12 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts @@ -0,0 +1,116 @@ +/* + * Device Tree file for Buffalo Linkstation LS-WXL + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-duo-6281.dtsi" + +/ { + model = "Buffalo Linkstation LS-WXL"; + compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_led_hdderr0: pmx-led-hdderr0 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_led_hdderr1: pmx-led-hdderr1 { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + }; + }; + + gpio_leds { + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue + &pmx_led_hdderr0 + &pmx_led_hdderr1>; + + red-hdderr0-led { + label = "linkstation:red:hdderr0"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + red-hdderr1-led { + label = "linkstation:red:hdderr1"; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + gpios = <&gpio1 16 GPIO_ACTIVE_LOW + &gpio1 15 GPIO_ACTIVE_LOW>; + + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + + alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-linkstation.dtsi index 930899d..69061b6 100644 --- a/arch/arm/boot/dts/kirkwood-lswxl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi @@ -1,5 +1,5 @@ /* - * Device Tree file for Buffalo Linkstation LS-WXL/WSXL + * Device Tree common file for kirkwood based Buffalo Linkstation * * Copyright (C) 2015, 2016 * Roger Shimizu <rogershimizu@gmail.com> @@ -43,20 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - / { - model = "Buffalo Linkstation LS-WXL/WSXL"; - compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { /* 128 MB */ - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; stdout-path = &uart0; @@ -74,67 +61,33 @@ ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_power_hdd0: pmx-power-hdd0 { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - pmx_power_hdd1: pmx-power-hdd1 { - marvell,pins = "mpp29"; marvell,function = "gpio"; }; pmx_usb_vbus: pmx-usb-vbus { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - pmx_led_hdderr0: pmx-led-hdderr0 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - pmx_led_hdderr1: pmx-led-hdderr1 { - marvell,pins = "mpp46"; marvell,function = "gpio"; }; pmx_led_alarm: pmx-led-alarm { - marvell,pins = "mpp49"; marvell,function = "gpio"; }; pmx_led_function_red: pmx-led-function-red { - marvell,pins = "mpp34"; marvell,function = "gpio"; }; pmx_led_function_blue: pmx-led-function-blue { - marvell,pins = "mpp36"; marvell,function = "gpio"; }; pmx_led_info: pmx-led-info { - marvell,pins = "mpp38"; marvell,function = "gpio"; }; pmx_led_power: pmx-led-power { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp40"; marvell,function = "gpio"; }; pmx_button_function: pmx-button-function { - marvell,pins = "mpp41"; marvell,function = "gpio"; }; pmx_power_switch: pmx-power-switch { - marvell,pins = "mpp42"; marvell,function = "gpio"; }; pmx_power_auto_switch: pmx-power-auto-switch { - marvell,pins = "mpp43"; marvell,function = "gpio"; }; }; @@ -145,7 +98,7 @@ sata@80000 { status = "okay"; - nr-ports = <2>; + nr-ports = <1>; }; spi@10600 { @@ -187,24 +140,21 @@ &pmx_power_auto_switch>; pinctrl-names = "default"; - button@1 { + function-button { label = "Function Button"; linux,code = <KEY_OPTION>; - gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; - button@2 { + power-on-switch { label = "Power-on Switch"; linux,code = <KEY_RESERVED>; linux,input-type = <5>; - gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; - button@3 { + power-auto-switch { label = "Power-auto Switch"; linux,code = <KEY_ESC>; linux,input-type = <5>; - gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; @@ -212,62 +162,8 @@ compatible = "gpio-leds"; pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm &pmx_led_info &pmx_led_power - &pmx_led_function_blue - &pmx_led_hdderr0 - &pmx_led_hdderr1>; + &pmx_led_function_blue>; pinctrl-names = "default"; - - led@1 { - label = "lswxl:blue:func"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - - led@2 { - label = "lswxl:red:alarm"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - }; - - led@3 { - label = "lswxl:amber:info"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - - led@4 { - label = "lswxl:blue:power"; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - led@5 { - label = "lswxl:red:func"; - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - }; - - led@6 { - label = "lswxl:red:hdderr0"; - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; - }; - - led@7 { - label = "lswxl:red:hdderr1"; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio_fan { - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; - pinctrl-names = "default"; - - gpios = <&gpio1 16 GPIO_ACTIVE_LOW - &gpio1 15 GPIO_ACTIVE_LOW>; - - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; - - alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; restart_poweroff { @@ -278,7 +174,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; + pinctrl-0 = <&pmx_power_hdd0 &pmx_usb_vbus>; pinctrl-names = "default"; usb_power: regulator@1 { @@ -290,8 +186,8 @@ enable-active-high; regulator-always-on; regulator-boot-on; - gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; + hdd_power0: regulator@2 { compatible = "regulator-fixed"; reg = <2>; @@ -301,35 +197,6 @@ enable-active-high; regulator-always-on; regulator-boot-on; - gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>; - }; - hdd_power1: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "HDD1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; }; }; - -&mdio { - status = "okay"; - - ethphy1: ethernet-phy@8 { - device_type = "ethernet-phy"; - reg = <8>; - }; -}; - -ð1 { - status = "okay"; - - ethernet1-port@0 { - phy-handle = <ðphy1>; - }; -}; |