diff options
Diffstat (limited to 'arch/arm64')
43 files changed, 3849 insertions, 327 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 7c55a63..51832ad 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -161,110 +161,7 @@ source "init/Kconfig" source "kernel/Kconfig.freezer" -menu "Platform selection" - -config ARCH_EXYNOS - bool - help - This enables support for Samsung Exynos SoC family - -config ARCH_EXYNOS7 - bool "ARMv8 based Samsung Exynos7" - select ARCH_EXYNOS - select COMMON_CLK_SAMSUNG - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select PINCTRL - select PINCTRL_EXYNOS - - help - This enables support for Samsung Exynos7 SoC family - -config ARCH_FSL_LS2085A - bool "Freescale LS2085A SOC" - help - This enables support for Freescale LS2085A SOC. - -config ARCH_HISI - bool "Hisilicon SoC Family" - help - This enables support for Hisilicon ARMv8 SoC family - -config ARCH_MEDIATEK - bool "Mediatek MT65xx & MT81xx ARMv8 SoC" - select ARM_GIC - select PINCTRL - help - Support for Mediatek MT65xx & MT81xx ARMv8 SoCs - -config ARCH_QCOM - bool "Qualcomm Platforms" - select PINCTRL - help - This enables support for the ARMv8 based Qualcomm chipsets. - -config ARCH_SEATTLE - bool "AMD Seattle SoC Family" - help - This enables support for AMD Seattle SOC Family - -config ARCH_TEGRA - bool "NVIDIA Tegra SoC Family" - select ARCH_HAS_RESET_CONTROLLER - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select HAVE_CLK - select PINCTRL - select RESET_CONTROLLER - help - This enables support for the NVIDIA Tegra SoC family. - -config ARCH_TEGRA_132_SOC - bool "NVIDIA Tegra132 SoC" - depends on ARCH_TEGRA - select PINCTRL_TEGRA124 - select USB_ULPI if USB_PHY - select USB_ULPI_VIEWPORT if USB_PHY - help - Enable support for NVIDIA Tegra132 SoC, based on the Denver - ARMv8 CPU. The Tegra132 SoC is similar to the Tegra124 SoC, - but contains an NVIDIA Denver CPU complex in place of - Tegra124's "4+1" Cortex-A15 CPU complex. - -config ARCH_SPRD - bool "Spreadtrum SoC platform" - help - Support for Spreadtrum ARM based SoCs - -config ARCH_THUNDER - bool "Cavium Inc. Thunder SoC Family" - help - This enables support for Cavium's Thunder Family of SoCs. - -config ARCH_VEXPRESS - bool "ARMv8 software model (Versatile Express)" - select ARCH_REQUIRE_GPIOLIB - select COMMON_CLK_VERSATILE - select POWER_RESET_VEXPRESS - select VEXPRESS_CONFIG - help - This enables support for the ARMv8 software model (Versatile - Express). - -config ARCH_XGENE - bool "AppliedMicro X-Gene SOC Family" - help - This enables support for AppliedMicro X-Gene SOC Family - -config ARCH_ZYNQMP - bool "Xilinx ZynqMP Family" - help - This enables support for Xilinx ZynqMP Family - -endmenu +source "arch/arm64/Kconfig.platforms" menu "Bus support" diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms new file mode 100644 index 0000000..23800a1 --- /dev/null +++ b/arch/arm64/Kconfig.platforms @@ -0,0 +1,125 @@ +menu "Platform selection" + +config ARCH_BCM_IPROC + bool "Broadcom iProc SoC Family" + help + This enables support for Broadcom iProc based SoCs + +config ARCH_BERLIN + bool "Marvell Berlin SoC Family" + select DW_APB_ICTL + help + This enables support for Marvell Berlin SoC Family + +config ARCH_EXYNOS + bool + help + This enables support for Samsung Exynos SoC family + +config ARCH_EXYNOS7 + bool "ARMv8 based Samsung Exynos7" + select ARCH_EXYNOS + select COMMON_CLK_SAMSUNG + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS + select PINCTRL + select PINCTRL_EXYNOS + + help + This enables support for Samsung Exynos7 SoC family + +config ARCH_FSL_LS2085A + bool "Freescale LS2085A SOC" + help + This enables support for Freescale LS2085A SOC. + +config ARCH_HISI + bool "Hisilicon SoC Family" + help + This enables support for Hisilicon ARMv8 SoC family + +config ARCH_MEDIATEK + bool "Mediatek MT65xx & MT81xx ARMv8 SoC" + select ARM_GIC + select PINCTRL + help + Support for Mediatek MT65xx & MT81xx ARMv8 SoCs + +config ARCH_QCOM + bool "Qualcomm Platforms" + select PINCTRL + help + This enables support for the ARMv8 based Qualcomm chipsets. + +config ARCH_ROCKCHIP + bool "Rockchip Platforms" + select ARCH_HAS_RESET_CONTROLLER + select ARCH_REQUIRE_GPIOLIB + select PINCTRL + select PINCTRL_ROCKCHIP + help + This enables support for the ARMv8 based Rockchip chipsets, + like the RK3368. + +config ARCH_SEATTLE + bool "AMD Seattle SoC Family" + help + This enables support for AMD Seattle SOC Family + +config ARCH_TEGRA + bool "NVIDIA Tegra SoC Family" + select ARCH_HAS_RESET_CONTROLLER + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select CLKSRC_OF + select GENERIC_CLOCKEVENTS + select HAVE_CLK + select PINCTRL + select RESET_CONTROLLER + help + This enables support for the NVIDIA Tegra SoC family. + +config ARCH_TEGRA_132_SOC + bool "NVIDIA Tegra132 SoC" + depends on ARCH_TEGRA + select PINCTRL_TEGRA124 + select USB_ULPI if USB_PHY + select USB_ULPI_VIEWPORT if USB_PHY + help + Enable support for NVIDIA Tegra132 SoC, based on the Denver + ARMv8 CPU. The Tegra132 SoC is similar to the Tegra124 SoC, + but contains an NVIDIA Denver CPU complex in place of + Tegra124's "4+1" Cortex-A15 CPU complex. + +config ARCH_SPRD + bool "Spreadtrum SoC platform" + help + Support for Spreadtrum ARM based SoCs + +config ARCH_THUNDER + bool "Cavium Inc. Thunder SoC Family" + help + This enables support for Cavium's Thunder Family of SoCs. + +config ARCH_VEXPRESS + bool "ARMv8 software model (Versatile Express)" + select ARCH_REQUIRE_GPIOLIB + select COMMON_CLK_VERSATILE + select POWER_RESET_VEXPRESS + select VEXPRESS_CONFIG + help + This enables support for the ARMv8 software model (Versatile + Express). + +config ARCH_XGENE + bool "AppliedMicro X-Gene SOC Family" + help + This enables support for AppliedMicro X-Gene SOC Family + +config ARCH_ZYNQMP + bool "Xilinx ZynqMP Family" + help + This enables support for Xilinx ZynqMP Family + +endmenu diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 38913be..d9f8833 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -1,12 +1,15 @@ dts-dirs += amd dts-dirs += apm dts-dirs += arm +dts-dirs += broadcom dts-dirs += cavium dts-dirs += exynos dts-dirs += freescale dts-dirs += hisilicon +dts-dirs += marvell dts-dirs += mediatek dts-dirs += qcom +dts-dirs += rockchip dts-dirs += sprd dts-dirs += xilinx diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index 0689c3f..d831bc2 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -490,7 +490,8 @@ 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ reg-names = "csr", "cfg"; ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ - 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ + 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000 /* mem */ + 0x43000000 0xf0 0x00000000 0xf0 0x00000000 0x10 0x00000000>; /* mem */ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; @@ -513,8 +514,9 @@ reg = < 0x00 0x1f2c0000 0x0 0x00010000 /* Controller registers */ 0xd0 0xd0000000 0x0 0x00040000>; /* PCI config space */ reg-names = "csr", "cfg"; - ranges = <0x01000000 0x0 0x00000000 0xd0 0x10000000 0x00 0x00010000 /* io */ - 0x02000000 0x0 0x80000000 0xd1 0x80000000 0x00 0x80000000>; /* mem */ + ranges = <0x01000000 0x00 0x00000000 0xd0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x80000000 0xd1 0x80000000 0x00 0x80000000 /* mem */ + 0x43000000 0xd8 0x00000000 0xd8 0x00000000 0x08 0x00000000>; /* mem */ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; @@ -537,8 +539,9 @@ reg = < 0x00 0x1f2d0000 0x0 0x00010000 /* Controller registers */ 0x90 0xd0000000 0x0 0x00040000>; /* PCI config space */ reg-names = "csr", "cfg"; - ranges = <0x01000000 0x0 0x00000000 0x90 0x10000000 0x0 0x00010000 /* io */ - 0x02000000 0x0 0x80000000 0x91 0x80000000 0x0 0x80000000>; /* mem */ + ranges = <0x01000000 0x00 0x00000000 0x90 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x80000000 0x91 0x80000000 0x00 0x80000000 /* mem */ + 0x43000000 0x94 0x00000000 0x94 0x00000000 0x04 0x00000000>; /* mem */ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; @@ -561,8 +564,9 @@ reg = < 0x00 0x1f500000 0x0 0x00010000 /* Controller registers */ 0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */ reg-names = "csr", "cfg"; - ranges = <0x01000000 0x0 0x00000000 0xa0 0x10000000 0x0 0x00010000 /* io */ - 0x02000000 0x0 0x80000000 0xa1 0x80000000 0x0 0x80000000>; /* mem */ + ranges = <0x01000000 0x00 0x00000000 0xa0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x80000000 0xa1 0x80000000 0x00 0x80000000 /* mem */ + 0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; @@ -585,8 +589,9 @@ reg = < 0x00 0x1f510000 0x0 0x00010000 /* Controller registers */ 0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */ reg-names = "csr", "cfg"; - ranges = <0x01000000 0x0 0x00000000 0xc0 0x10000000 0x0 0x00010000 /* io */ - 0x02000000 0x0 0x80000000 0xc1 0x80000000 0x0 0x80000000>; /* mem */ + ranges = <0x01000000 0x00 0x00000000 0xc0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x80000000 0xc1 0x80000000 0x00 0x80000000 /* mem */ + 0x43000000 0xc8 0x00000000 0xc8 0x00000000 0x08 0x00000000>; /* mem */ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; @@ -823,7 +828,7 @@ device_type = "dma"; reg = <0x0 0x1f270000 0x0 0x10000>, <0x0 0x1f200000 0x0 0x10000>, - <0x0 0x1b008000 0x0 0x2000>, + <0x0 0x1b000000 0x0 0x400000>, <0x0 0x1054a000 0x0 0x100>; interrupts = <0x0 0x82 0x4>, <0x0 0xb8 0x4>, diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 021e0f4..637e046 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -136,6 +136,8 @@ clock-names = "refclk", "timclk", "apb_pclk"; #clock-cells = <1>; clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; + assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; }; apbregs@010000 { diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index c46cbb2..88a7583 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -74,6 +74,8 @@ clock-names = "refclk", "timclk", "apb_pclk"; #clock-cells = <1>; clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; + assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; }; aaci@040000 { diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile new file mode 100644 index 0000000..e21fe66 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts new file mode 100644 index 0000000..244baf8 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts @@ -0,0 +1,59 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "ns2.dtsi" + +/ { + model = "Broadcom NS2 SVK"; + compatible = "brcm,ns2-svk", "brcm,ns2"; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x000000000 0x80000000 0x00000000 0x40000000>; + }; + + soc: soc { + uart3: serial@66130000 { + status = "ok"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi new file mode 100644 index 0000000..3c92d92 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -0,0 +1,118 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/memreserve/ 0x84b00000 0x00000008; + +/ { + compatible = "brcm,ns2"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0 0>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x84b00000>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0 1>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x84b00000>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0 2>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x84b00000>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0 3>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x84b00000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) | + IRQ_TYPE_EDGE_RISING)>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + gic: interrupt-controller@65210000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x65210000 0x1000>, + <0x65220000 0x1000>, + <0x65240000 0x2000>, + <0x65260000 0x1000>; + }; + + uart3: serial@66130000 { + compatible = "snps,dw-apb-uart"; + reg = <0x66130000 0x100>; + interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <23961600>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile new file mode 100644 index 0000000..e2f6afa --- /dev/null +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts b/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts new file mode 100644 index 0000000..0d70d39 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2015 Marvell Technology Group Ltd. + * + * Author: Jisheng Zhang <jszhang@marvell.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "berlin4ct.dtsi" + +/ { + model = "Marvell BG4CT DMP board"; + compatible = "marvell,berlin4ct-dmp", "marvell,berlin4ct", "marvell,berlin"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + /* the first 16MB is for firmwares' usage */ + reg = <0 0x01000000 0 0x7f000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi new file mode 100644 index 0000000..dd4a10d --- /dev/null +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi @@ -0,0 +1,164 @@ +/* + * Copyright (C) 2015 Marvell Technology Group Ltd. + * + * Author: Jisheng Zhang <jszhang@marvell.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "marvell,berlin4ct", "marvell,berlin"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x3>; + enable-method = "psci"; + }; + }; + + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xf7000000 0x1000000>; + + gic: interrupt-controller@901000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x901000 0x1000>, + <0x902000 0x2000>, + <0x904000 0x2000>, + <0x906000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + apb@fc0000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfc0000 0x10000>; + interrupt-parent = <&sic>; + + sic: interrupt-controller@1000 { + compatible = "snps,dw-apb-ictl"; + reg = <0x1000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + }; + + uart0: uart@d000 { + compatible = "snps,dw-apb-uart"; + reg = <0xd000 0x100>; + interrupts = <8>; + clocks = <&osc>; + reg-shift = <2>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 3ce2462..e0a4bff 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -1,3 +1,4 @@ +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb always := $(dtb-y) diff --git a/arch/arm64/boot/dts/mediatek/mt6795-evb.dts b/arch/arm64/boot/dts/mediatek/mt6795-evb.dts new file mode 100644 index 0000000..ad665f5 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6795-evb.dts @@ -0,0 +1,41 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Mars.C <mars.cheng@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt6795.dtsi" + +/ { + model = "MediaTek MT6795 Evaluation Board"; + compatible = "mediatek,mt6795-evb", "mediatek,mt6795"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x1e800000>; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi new file mode 100644 index 0000000..c85659d --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi @@ -0,0 +1,175 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Mars.C <mars.cheng@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "mediatek,mt6795"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x001>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x002>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x003>; + }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x100>; + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x101>; + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x102>; + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x103>; + }; + }; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + rtc_clk: dummy32k { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + sysirq: intpol-controller@10200620 { + compatible = "mediatek,mt6795-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200620 0 0x20>; + }; + + gic: interrupt-controller@10221000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x10221000 0 0x1000>, + <0 0x10222000 0 0x2000>, + <0 0x10224000 0 0x2000>, + <0 0x10226000 0 0x2000>; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt6795-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt6795-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt6795-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt6795-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index d0ab012..4be66ca 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -34,6 +34,359 @@ chosen { }; }; +&i2c1 { + status = "okay"; + + buck: da9211@68 { + compatible = "dlg,da9211"; + reg = <0x68>; + + regulators { + da9211_vcpu_reg: BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1310000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <4400000>; + regulator-ramp-delay = <10000>; + regulator-always-on; + }; + + da9211_vgpu_reg: BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1310000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <3000000>; + regulator-ramp-delay = <10000>; + }; + }; + }; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + max-frequency = <50000000>; + cap-mmc-highspeed; + vmmc-supply = <&mt6397_vemc_3v3_reg>; + vqmmc-supply = <&mt6397_vio18_reg>; + non-removable; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + sd-uhs-sdr25; + cd-gpios = <&pio 132 0>; + vmmc-supply = <&mt6397_vmch_reg>; + vqmmc-supply = <&mt6397_vmc_reg>; +}; + +&pio { + mmc0_pins_default: mmc0default { + pins_cmd_dat { + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; + input-enable; + bias-pull-up; + }; + + pins_clk { + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; + bias-pull-down; + }; + + pins_rst { + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; + bias-pull-up; + }; + }; + + mmc1_pins_default: mmc1default { + pins_cmd_dat { + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; + bias-pull-down; + drive-strength = <MTK_DRIVE_4mA>; + }; + + pins_insert { + pinmux = <MT8173_PIN_132_I2S0_DATA1__FUNC_GPIO132>; + bias-pull-up; + }; + }; + + mmc0_pins_uhs: mmc0 { + pins_cmd_dat { + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_2mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_clk { + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_2mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_rst { + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; + bias-pull-up; + }; + }; + + mmc1_pins_uhs: mmc1 { + pins_cmd_dat { + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; +}; + +&pwrap { + pmic: mt6397 { + compatible = "mediatek,mt6397"; + interrupt-parent = <&pio>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + mt6397regulator: mt6397regulator { + compatible = "mediatek,mt6397-regulator"; + + mt6397_vpca15_reg: buck_vpca15 { + regulator-compatible = "buck_vpca15"; + regulator-name = "vpca15"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vpca7_reg: buck_vpca7 { + regulator-compatible = "buck_vpca7"; + regulator-name = "vpca7"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vsramca15_reg: buck_vsramca15 { + regulator-compatible = "buck_vsramca15"; + regulator-name = "vsramca15"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vsramca7_reg: buck_vsramca7 { + regulator-compatible = "buck_vsramca7"; + regulator-name = "vsramca7"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vcore_reg: buck_vcore { + regulator-compatible = "buck_vcore"; + regulator-name = "vcore"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vgpu_reg: buck_vgpu { + regulator-compatible = "buck_vgpu"; + regulator-name = "vgpu"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vdrm_reg: buck_vdrm { + regulator-compatible = "buck_vdrm"; + regulator-name = "vdrm"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vio18_reg: buck_vio18 { + regulator-compatible = "buck_vio18"; + regulator-name = "vio18"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vtcxo_reg: ldo_vtcxo { + regulator-compatible = "ldo_vtcxo"; + regulator-name = "vtcxo"; + regulator-always-on; + }; + + mt6397_va28_reg: ldo_va28 { + regulator-compatible = "ldo_va28"; + regulator-name = "va28"; + regulator-always-on; + }; + + mt6397_vcama_reg: ldo_vcama { + regulator-compatible = "ldo_vcama"; + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vio28_reg: ldo_vio28 { + regulator-compatible = "ldo_vio28"; + regulator-name = "vio28"; + regulator-always-on; + }; + + mt6397_vusb_reg: ldo_vusb { + regulator-compatible = "ldo_vusb"; + regulator-name = "vusb"; + }; + + mt6397_vmc_reg: ldo_vmc { + regulator-compatible = "ldo_vmc"; + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vmch_reg: ldo_vmch { + regulator-compatible = "ldo_vmch"; + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vemc_3v3_reg: ldo_vemc3v3 { + regulator-compatible = "ldo_vemc3v3"; + regulator-name = "vemc_3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp1_reg: ldo_vgp1 { + regulator-compatible = "ldo_vgp1"; + regulator-name = "vcamd"; + regulator-min-microvolt = <1220000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + }; + + mt6397_vgp2_reg: ldo_vgp2 { + regulator-compatible = "ldo_vgp2"; + regulator-name = "vcamio"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp3_reg: ldo_vgp3 { + regulator-compatible = "ldo_vgp3"; + regulator-name = "vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp4_reg: ldo_vgp4 { + regulator-compatible = "ldo_vgp4"; + regulator-name = "vgp4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp5_reg: ldo_vgp5 { + regulator-compatible = "ldo_vgp5"; + regulator-name = "vgp5"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp6_reg: ldo_vgp6 { + regulator-compatible = "ldo_vgp6"; + regulator-name = "vgp6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vibr_reg: ldo_vibr { + regulator-compatible = "ldo_vibr"; + regulator-name = "vibr"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + }; + }; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 27237a1..d18ee42 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -11,8 +11,11 @@ * GNU General Public License for more details. */ +#include <dt-bindings/clock/mt8173-clk.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/mt8173-power.h> +#include <dt-bindings/reset-controller/mt8173-resets.h> #include "mt8173-pinfunc.h" / { @@ -49,6 +52,8 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x000>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; cpu1: cpu@1 { @@ -56,6 +61,7 @@ compatible = "arm,cortex-a53"; reg = <0x001>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; cpu2: cpu@100 { @@ -63,6 +69,7 @@ compatible = "arm,cortex-a57"; reg = <0x100>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; cpu3: cpu@101 { @@ -70,6 +77,20 @@ compatible = "arm,cortex-a57"; reg = <0x101>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + }; + + idle-states { + entry-method = "arm,psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <639>; + exit-latency-us = <680>; + min-residency-us = <1088>; + arm,psci-suspend-param = <0x0010000>; + }; }; }; @@ -81,10 +102,18 @@ cpu_on = <0x84000003>; }; - uart_clk: dummy26m { + clk26m: oscillator@0 { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + clk32k: oscillator@1 { + compatible = "fixed-clock"; #clock-cells = <0>; + clock-frequency = <32000>; + clock-output-names = "clk32k"; }; timer { @@ -106,11 +135,32 @@ compatible = "simple-bus"; ranges; - /* - * Pinctrl access register at 0x10005000 through regmap. - * Register 0x1000b000 is used by EINT. - */ - pio: pinctrl@10005000 { + topckgen: clock-controller@10000000 { + compatible = "mediatek,mt8173-topckgen"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: power-controller@10001000 { + compatible = "mediatek,mt8173-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pericfg: power-controller@10003000 { + compatible = "mediatek,mt8173-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + syscfg_pctl_a: syscfg_pctl_a@10005000 { + compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + + pio: pinctrl@0x10005000 { compatible = "mediatek,mt8173-pinctrl"; reg = <0 0x1000b000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a>; @@ -122,11 +172,81 @@ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + + i2c0_pins_a: i2c0 { + pins1 { + pinmux = <MT8173_PIN_45_SDA0__FUNC_SDA0>, + <MT8173_PIN_46_SCL0__FUNC_SCL0>; + bias-disable; + }; + }; + + i2c1_pins_a: i2c1 { + pins1 { + pinmux = <MT8173_PIN_125_SDA1__FUNC_SDA1>, + <MT8173_PIN_126_SCL1__FUNC_SCL1>; + bias-disable; + }; + }; + + i2c2_pins_a: i2c2 { + pins1 { + pinmux = <MT8173_PIN_43_SDA2__FUNC_SDA2>, + <MT8173_PIN_44_SCL2__FUNC_SCL2>; + bias-disable; + }; + }; + + i2c3_pins_a: i2c3 { + pins1 { + pinmux = <MT8173_PIN_106_SDA3__FUNC_SDA3>, + <MT8173_PIN_107_SCL3__FUNC_SCL3>; + bias-disable; + }; + }; + + i2c4_pins_a: i2c4 { + pins1 { + pinmux = <MT8173_PIN_133_SDA4__FUNC_SDA4>, + <MT8173_PIN_134_SCL4__FUNC_SCL4>; + bias-disable; + }; + }; + + i2c6_pins_a: i2c6 { + pins1 { + pinmux = <MT8173_PIN_100_MSDC2_DAT0__FUNC_SDA5>, + <MT8173_PIN_101_MSDC2_DAT1__FUNC_SCL5>; + bias-disable; + }; + }; }; - syscfg_pctl_a: syscfg_pctl_a@10005000 { - compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon"; - reg = <0 0x10005000 0 0x1000>; + scpsys: scpsys@10006000 { + compatible = "mediatek,mt8173-scpsys"; + #power-domain-cells = <1>; + reg = <0 0x10006000 0 0x1000>; + clocks = <&clk26m>, + <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mfg", "mm"; + infracfg = <&infracfg>; + }; + + watchdog: watchdog@10007000 { + compatible = "mediatek,mt8173-wdt", + "mediatek,mt6589-wdt"; + reg = <0 0x10007000 0 0x100>; + }; + + pwrap: pwrap@1000d000 { + compatible = "mediatek,mt8173-pwrap"; + reg = <0 0x1000d000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + resets = <&infracfg MT8173_INFRA_PMIC_WRAP_RST>; + reset-names = "pwrap"; + clocks = <&infracfg CLK_INFRA_PMICSPI>, <&infracfg CLK_INFRA_PMICWRAP>; + clock-names = "spi", "wrap"; }; sysirq: intpol-controller@10200620 { @@ -138,6 +258,12 @@ reg = <0 0x10200620 0 0x20>; }; + apmixedsys: clock-controller@10209000 { + compatible = "mediatek,mt8173-apmixedsys"; + reg = <0 0x10209000 0 0x1000>; + #clock-cells = <1>; + }; + gic: interrupt-controller@10220000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -156,7 +282,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x400>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -165,7 +292,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11003000 0 0x400>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -174,7 +302,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11004000 0 0x400>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -183,7 +312,179 @@ "mediatek,mt6577-uart"; reg = <0 0x11005000 0 0x400>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + i2c0: i2c@11007000 { + compatible = "mediatek,mt8173-i2c"; + reg = <0 0x11007000 0 0x70>, + <0 0x11000100 0 0x80>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C0>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt8173-i2c"; + reg = <0 0x11008000 0 0x70>, + <0 0x11000180 0 0x80>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C1>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt8173-i2c"; + reg = <0 0x11009000 0 0x70>, + <0 0x11000200 0 0x80>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C2>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c3@11010000 { + compatible = "mediatek,mt8173-i2c"; + reg = <0 0x11010000 0 0x70>, + <0 0x11000280 0 0x80>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C3>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_a>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c4@11011000 { + compatible = "mediatek,mt8173-i2c"; + reg = <0 0x11011000 0 0x70>, + <0 0x11000300 0 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C4>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c6@11013000 { + compatible = "mediatek,mt8173-i2c"; + reg = <0 0x11013000 0 0x70>, + <0 0x11000080 0 0x80>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C6>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins_a>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + afe: audio-controller@11220000 { + compatible = "mediatek,mt8173-afe-pcm"; + reg = <0 0x11220000 0 0x1000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_FALLING>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_AUDIO>; + clocks = <&infracfg CLK_INFRA_AUDIO>, + <&topckgen CLK_TOP_AUDIO_SEL>, + <&topckgen CLK_TOP_AUD_INTBUS_SEL>, + <&topckgen CLK_TOP_APLL1_DIV0>, + <&topckgen CLK_TOP_APLL2_DIV0>, + <&topckgen CLK_TOP_I2S0_M_SEL>, + <&topckgen CLK_TOP_I2S1_M_SEL>, + <&topckgen CLK_TOP_I2S2_M_SEL>, + <&topckgen CLK_TOP_I2S3_M_SEL>, + <&topckgen CLK_TOP_I2S3_B_SEL>; + clock-names = "infra_sys_audio_clk", + "top_pdn_audio", + "top_pdn_aud_intbus", + "bck0", + "bck1", + "i2s0_m", + "i2s1_m", + "i2s2_m", + "i2s3_m", + "i2s3_b"; + assigned-clocks = <&topckgen CLK_TOP_AUD_1_SEL>, + <&topckgen CLK_TOP_AUD_2_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_APLL1>, + <&topckgen CLK_TOP_APLL2>; + }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt8173-mmc", + "mediatek,mt8135-mmc"; + reg = <0 0x11230000 0 0x1000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_MSDC30_0>, + <&topckgen CLK_TOP_MSDC50_0_H_SEL>; + clock-names = "source", "hclk"; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt8173-mmc", + "mediatek,mt8135-mmc"; + reg = <0 0x11240000 0 0x1000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_MSDC30_1>, + <&topckgen CLK_TOP_AXI_SEL>; + clock-names = "source", "hclk"; + status = "disabled"; + }; + + mmc2: mmc@11250000 { + compatible = "mediatek,mt8173-mmc", + "mediatek,mt8135-mmc"; + reg = <0 0x11250000 0 0x1000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_MSDC30_2>, + <&topckgen CLK_TOP_AXI_SEL>; + clock-names = "source", "hclk"; + status = "disabled"; + }; + + mmc3: mmc@11260000 { + compatible = "mediatek,mt8173-mmc", + "mediatek,mt8135-mmc"; + reg = <0 0x11260000 0 0x1000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_MSDC30_3>, + <&topckgen CLK_TOP_MSDC50_2_H_SEL>; + clock-names = "source", "hclk"; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi index 535532b..e03c11d 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi @@ -2,27 +2,37 @@ &pm8916_gpios { - pinctrl-names = "default"; - pinctrl-0 = <&pm8916_gpios_default>; - - pm8916_gpios_default: default { - usb_hub_reset_pm { - pins = "gpio1"; + usb_hub_reset_pm: usb_hub_reset_pm { + pinconf { + pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; output-low; }; - usb_sw_sel_pm { - pins = "gpio2"; + }; + + usb_sw_sel_pm: usb_sw_sel_pm { + pinconf { + pins = "gpio4"; function = PMIC_GPIO_FUNC_NORMAL; + power-source = <PM8916_GPIO_VPH>; input-disable; }; - usr_led_3_ctrl { - pins = "gpio3"; + }; + + pm8916_gpios_leds: pm8916_gpios_leds { + pinconf { + pins = "gpio1", "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; output-low; }; - usr_led_4_ctrl { - pins = "gpio4"; + }; +}; + +&pm8916_mpps { + + pm8916_mpps_leds: pm8916_mpps_leds { + pinconf { + pins = "mpp2", "mpp3"; function = PMIC_GPIO_FUNC_NORMAL; output-low; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi index 5f7023f..cbeee0b 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi @@ -3,17 +3,9 @@ &msmgpio { - pinctrl-names = "default"; - pinctrl-0 = <&soc_gpios_default>; - - soc_gpios_default: default { - usr_led_1_ctrl_default: usr_led_1_ctrl_default { - pins = "gpio21"; - function = "gpio"; - output-low; - }; - usr_led_2_ctrl_default: usr_led_2_ctrl_default { - pins = "gpio120"; + msmgpio_leds: msmgpio_leds { + pinconf { + pins = "gpio21", "gpio120"; function = "gpio"; output-low; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 98abece..66804ff 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -32,5 +32,56 @@ pinctrl-0 = <&blsp1_uart2_default>; pinctrl-1 = <&blsp1_uart2_sleep>; }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&msmgpio_leds>, + <&pm8916_gpios_leds>, + <&pm8916_mpps_leds>; + + compatible = "gpio-leds"; + + led@1 { + label = "apq8016-sbc:green:user1"; + gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@2 { + label = "apq8016-sbc:green:user2"; + gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@3 { + label = "apq8016-sbc:green:user3"; + gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led@4 { + label = "apq8016-sbc:green:user4"; + gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led@5 { + label = "apq8016-sbc:yellow:wlan"; + gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "wlan"; + default-state = "off"; + }; + + led@6 { + label = "apq8016-sbc:blue:bt"; + gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bt"; + default-state = "off"; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi new file mode 100644 index 0000000..5689568 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -0,0 +1,430 @@ +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +&msmgpio { + + blsp1_uart2_default: blsp1_uart2_default { + pinmux { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; + }; + + blsp1_uart2_sleep: blsp1_uart2_sleep { + pinmux { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi1_default: spi1_default { + pinmux { + function = "blsp_spi1"; + pins = "gpio0", "gpio1", "gpio3"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio2"; + }; + pinconf { + pins = "gpio0", "gpio1", "gpio3"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio2"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi1_sleep: spi1_sleep { + pinmux { + function = "gpio"; + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + }; + pinconf { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi2_default: spi2_default { + pinmux { + function = "blsp_spi2"; + pins = "gpio4", "gpio5", "gpio7"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio6"; + }; + pinconf { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio6"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi2_sleep: spi2_sleep { + pinmux { + function = "gpio"; + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + }; + pinconf { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi3_default: spi3_default { + pinmux { + function = "blsp_spi3"; + pins = "gpio8", "gpio9", "gpio11"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio10"; + }; + pinconf { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio10"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi3_sleep: spi3_sleep { + pinmux { + function = "gpio"; + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + }; + pinconf { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi4_default: spi4_default { + pinmux { + function = "blsp_spi4"; + pins = "gpio12", "gpio13", "gpio15"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio14"; + }; + pinconf { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio14"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi4_sleep: spi4_sleep { + pinmux { + function = "gpio"; + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + }; + pinconf { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi5_default: spi5_default { + pinmux { + function = "blsp_spi5"; + pins = "gpio16", "gpio17", "gpio19"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio18"; + }; + pinconf { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio18"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi5_sleep: spi5_sleep { + pinmux { + function = "gpio"; + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + }; + pinconf { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi6_default: spi6_default { + pinmux { + function = "blsp_spi6"; + pins = "gpio20", "gpio21", "gpio23"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio22"; + }; + pinconf { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio22"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi6_sleep: spi6_sleep { + pinmux { + function = "gpio"; + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + }; + pinconf { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + i2c4_default: i2c4_default { + pinmux { + function = "blsp_i2c4"; + pins = "gpio14", "gpio15"; + }; + pinconf { + pins = "gpio14", "gpio15"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + i2c4_sleep: i2c4_sleep { + pinmux { + function = "blsp_i2c4"; + pins = "gpio14", "gpio15"; + }; + pinconf { + pins = "gpio14", "gpio15"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + sdhc2_cd_pin { + sdc2_cd_on: cd_on { + pinmux { + function = "gpio"; + pins = "gpio38"; + }; + pinconf { + pins = "gpio38"; + drive-strength = <2>; + bias-pull-up; + }; + }; + sdc2_cd_off: cd_off { + pinmux { + function = "gpio"; + pins = "gpio38"; + }; + pinconf { + pins = "gpio38"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + + pmx_sdc1_clk { + sdc1_clk_on: clk_on { + pinmux { + pins = "sdc1_clk"; + }; + pinconf { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + }; + sdc1_clk_off: clk_off { + pinmux { + pins = "sdc1_clk"; + }; + pinconf { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc1_cmd { + sdc1_cmd_on: cmd_on { + pinmux { + pins = "sdc1_cmd"; + }; + pinconf { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + }; + sdc1_cmd_off: cmd_off { + pinmux { + pins = "sdc1_cmd"; + }; + pinconf { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc1_data { + sdc1_data_on: data_on { + pinmux { + pins = "sdc1_data"; + }; + pinconf { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + sdc1_data_off: data_off { + pinmux { + pins = "sdc1_data"; + }; + pinconf { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc2_clk { + sdc2_clk_on: clk_on { + pinmux { + pins = "sdc2_clk"; + }; + pinconf { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + }; + sdc2_clk_off: clk_off { + pinmux { + pins = "sdc2_clk"; + }; + pinconf { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc2_cmd { + sdc2_cmd_on: cmd_on { + pinmux { + pins = "sdc2_cmd"; + }; + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + }; + sdc2_cmd_off: cmd_off { + pinmux { + pins = "sdc2_cmd"; + }; + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc2_data { + sdc2_data_on: data_on { + pinmux { + pins = "sdc2_data"; + }; + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + sdc2_data_off: data_off { + pinmux { + pins = "sdc2_data"; + }; + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 0f49ebd..5911de0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -24,7 +24,10 @@ #address-cells = <2>; #size-cells = <2>; - aliases { }; + aliases { + sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ + sdhc2 = &sdhc_2; /* SDC2 SD card slot */ + }; chosen { }; @@ -90,30 +93,6 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - - blsp1_uart2_default: blsp1_uart2_default { - pinmux { - function = "blsp_uart2"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp1_uart2_sleep: blsp1_uart2_sleep { - pinmux { - function = "blsp_uart2"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-pull-down; - }; - }; }; gcc: qcom,gcc@1800000 { @@ -132,6 +111,202 @@ status = "disabled"; }; + blsp_dma: dma@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + blsp_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 5>, <&blsp_dma 4>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_default>; + pinctrl-1 = <&spi1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi2: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 7>, <&blsp_dma 6>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi2_default>; + pinctrl-1 = <&spi2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 9>, <&blsp_dma 8>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi3_default>; + pinctrl-1 = <&spi3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi4: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 11>, <&blsp_dma 10>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi4_default>; + pinctrl-1 = <&spi4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x600>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 13>, <&blsp_dma 12>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi5_default>; + pinctrl-1 = <&spi5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi6: spi@78ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078ba000 0x600>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 15>, <&blsp_dma 14>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi6_default>; + pinctrl-1 = <&spi6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b8000 0x1000>; + interrupts = <GIC_SPI 98 0>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_default>; + pinctrl-1 = <&i2c4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sdhc_1: sdhci@07824000 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x07824900 0x11c>, <0x07824000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <0 123 0>, <0 138 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: sdhci@07864000 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x07864900 0x11c>, <0x07864000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <0 125 0>, <0 221 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + bus-width = <4>; + status = "disabled"; + }; + + usb_dev: usb@78d9000 { + compatible = "qcom,ci-hdrc"; + reg = <0x78d9000 0x400>; + dr_mode = "peripheral"; + interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>; + usb-phy = <&usb_otg>; + status = "disabled"; + }; + + usb_host: ehci@78d9000 { + compatible = "qcom,ehci-host"; + reg = <0x78d9000 0x400>; + interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>; + usb-phy = <&usb_otg>; + status = "disabled"; + }; + + usb_otg: phy@78d9000 { + compatible = "qcom,usb-otg-snps"; + reg = <0x78d9000 0x400>; + interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>, + <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>; + + qcom,vdd-levels = <1 5 7>; + qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>; + dr_mode = "peripheral"; + qcom,otg-control = <2>; // PMIC + + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "iface", "core", "sleep"; + + resets = <&gcc GCC_USB2A_PHY_BCR>, + <&gcc GCC_USB_HS_BCR>; + reset-names = "phy", "link"; + status = "disabled"; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -217,3 +392,5 @@ }; }; }; + +#include "msm8916-pins.dtsi" diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile new file mode 100644 index 0000000..601e6a2 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts new file mode 100644 index 0000000..401a812 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -0,0 +1,354 @@ +/* + * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3368.dtsi" + +/ { + model = "Rockchip R88"; + compatible = "rockchip,r88", "rockchip,rk3368"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + + button@0 { + gpio-key,wakeup = <1>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <116>; + }; + }; + + leds: gpio-leds { + compatible = "gpio-leds"; + + work { + gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + label = "r88:green:led"; + pinctrl-names = "default"; + pinctrl-0 = <&led_ctl>; + }; + }; + + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_rst>, <&wifi_reg_on>; + + reset-gpios = + /* BT_RST_N */ + <&gpio3 5 GPIO_ACTIVE_LOW>, + + /* WL_REG_ON */ + <&gpio3 4 GPIO_ACTIVE_LOW>; + }; + + vcc_18: vcc18-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + /* supplies both host and otg */ + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vcc_io: vcc-io-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vcc_lan: vcc-lan-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_lan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vccio_wl: vccio-wl-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccio_wl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vdd_10: vdd-10-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; +}; + +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + mmc-pwrseq = <&emmc_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "okay"; +}; + +&gmac { + phy-supply = <&vcc_lan>; + phy-mode = "rmii"; + clock_in_out = "output"; + snps,reset-gpio = <&gpio3 12 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: syr827@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-enable-ramp-delay = <300>; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <8000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + /* rtc_int is not connected */ + }; +}; + +&sdio0 { + assigned-clocks = <&cru SCLK_SDIO0>; + assigned-clock-parents = <&cru PLL_CPLL>; + broken-cd; + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vccio_wl>; + status = "okay"; +}; + +&pinctrl { + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + emmc { + emmc_bus8: emmc-bus8 { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + }; + + emmc-clk { + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + }; + + emmc-cmd { + rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + }; + + emmc_reset: emmc-reset { + rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + keys { + pwr_key: pwr-key { + rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + stby_pwren: stby-pwren { + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + led_ctl: led-ctl { + rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio { + wifi_reg_on: wifi-reg-on { + rockchip,pins = <3 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_rst: bt-rst { + rockchip,pins = <3 5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi new file mode 100644 index 0000000..a712bea --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -0,0 +1,900 @@ +/* + * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/rk3368-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/rockchip.h> + +/ { + compatible = "rockchip,rk3368"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + }; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu_b0>; + }; + core1 { + cpu = <&cpu_b1>; + }; + core2 { + cpu = <&cpu_b2>; + }; + core3 { + cpu = <&cpu_b3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu_l0>; + }; + core1 { + cpu = <&cpu_l1>; + }; + core2 { + cpu = <&cpu_l2>; + }; + core3 { + cpu = <&cpu_l3>; + }; + }; + }; + + idle-states { + entry-method = "arm,psci"; + + cpu_sleep: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <0x3fffffff>; + exit-latency-us = <0x40000000>; + min-residency-us = <0xffffffff>; + }; + }; + + cpu_l0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + + cpu_l1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + + cpu_l2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + + cpu_l3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + + cpu_b0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x100>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + + cpu_b1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x101>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + + cpu_b2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x102>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + + cpu_b3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x103>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + }; + + arm-pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu_l0>, <&cpu_l1>, <&cpu_l2>, + <&cpu_l3>, <&cpu_b0>, <&cpu_b1>, + <&cpu_b2>, <&cpu_b3>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + sdmmc: dwmmc@ff0c0000 { + compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff0c0000 0x0 0x4000>; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdio0: dwmmc@ff0d0000 { + compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff0d0000 0x0 0x4000>; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, + <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + emmc: dwmmc@ff0f0000 { + compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff0f0000 0x0 0x4000>; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + saradc: saradc@ff100000 { + compatible = "rockchip,saradc"; + reg = <0x0 0xff100000 0x0 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + status = "disabled"; + }; + + spi0: spi@ff110000 { + compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff110000 0x0 0x1000>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@ff120000 { + compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff120000 0x0 0x1000>; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@ff130000 { + compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff130000 0x0 0x1000>; + clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@ff140000 { + compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; + reg = <0x0 0xff140000 0x0 0x1000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + status = "disabled"; + }; + + i2c3: i2c@ff150000 { + compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; + reg = <0x0 0xff150000 0x0 0x1000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + status = "disabled"; + }; + + i2c4: i2c@ff160000 { + compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; + reg = <0x0 0xff160000 0x0 0x1000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C4>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_xfer>; + status = "disabled"; + }; + + i2c5: i2c@ff170000 { + compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; + reg = <0x0 0xff170000 0x0 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C5>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_xfer>; + status = "disabled"; + }; + + uart0: serial@ff180000 { + compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff180000 0x0 0x100>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial@ff190000 { + compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff190000 0x0 0x100>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@ff1b0000 { + compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff1b0000 0x0 0x100>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart4: serial@ff1c0000 { + compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff1c0000 0x0 0x100>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + gmac: ethernet@ff290000 { + compatible = "rockchip,rk3368-gmac"; + reg = <0x0 0xff290000 0x0 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + rockchip,grf = <&grf>; + clocks = <&cru SCLK_MAC>, + <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, + <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>, + <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; + clock-names = "stmmaceth", + "mac_clk_rx", "mac_clk_tx", + "clk_mac_ref", "clk_mac_refout", + "aclk_mac", "pclk_mac"; + status = "disabled"; + }; + + usb_host0_ehci: usb@ff500000 { + compatible = "generic-ehci"; + reg = <0x0 0xff500000 0x0 0x100>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>; + clock-names = "usbhost"; + status = "disabled"; + }; + + usb_otg: usb@ff580000 { + compatible = "rockchip,rk3368-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x0 0xff580000 0x0 0x40000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG0>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <275>; + g-tx-fifo-size = <256 128 128 64 64 32>; + g-use-dma; + status = "disabled"; + }; + + i2c0: i2c@ff650000 { + compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; + reg = <0x0 0xff650000 0x0 0x1000>; + clocks = <&cru PCLK_I2C0>; + clock-names = "i2c"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@ff660000 { + compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; + reg = <0x0 0xff660000 0x0 0x1000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + status = "disabled"; + }; + + uart2: serial@ff690000 { + compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff690000 0x0 0x100>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + pmugrf: syscon@ff738000 { + compatible = "rockchip,rk3368-pmugrf", "syscon"; + reg = <0x0 0xff738000 0x0 0x1000>; + }; + + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3368-cru"; + reg = <0x0 0xff760000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + grf: syscon@ff770000 { + compatible = "rockchip,rk3368-grf", "syscon"; + reg = <0x0 0xff770000 0x0 0x1000>; + }; + + wdt: watchdog@ff800000 { + compatible = "rockchip,rk3368-wdt", "snps,dw-wdt"; + reg = <0x0 0xff800000 0x0 0x100>; + clocks = <&cru PCLK_WDT>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + gic: interrupt-controller@ffb71000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0x0 0xffb71000 0x0 0x1000>, + <0x0 0xffb72000 0x0 0x1000>, + <0x0 0xffb74000 0x0 0x2000>, + <0x0 0xffb76000 0x0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3368-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <0x2>; + #size-cells = <0x2>; + ranges; + + gpio0: gpio0@ff750000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff750000 0x0 0x100>; + clocks = <&cru PCLK_GPIO0>; + interrupts = <GIC_SPI 0x51 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + gpio1: gpio1@ff780000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff780000 0x0 0x100>; + clocks = <&cru PCLK_GPIO1>; + interrupts = <GIC_SPI 0x52 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + gpio2: gpio2@ff790000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff790000 0x0 0x100>; + clocks = <&cru PCLK_GPIO2>; + interrupts = <GIC_SPI 0x53 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + gpio3: gpio3@ff7a0000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff7a0000 0x0 0x100>; + clocks = <&cru PCLK_GPIO3>; + interrupts = <GIC_SPI 0x54 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_12ma: pcfg-pull-none-12ma { + bias-disable; + drive-strength = <12>; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_pwr: emmc-pwr { + rockchip,pins = <1 27 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_bus1: emmc-bus1 { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_bus4: emmc-bus4 { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>, + <1 19 RK_FUNC_2 &pcfg_pull_up>, + <1 20 RK_FUNC_2 &pcfg_pull_up>, + <1 21 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>, + <1 19 RK_FUNC_2 &pcfg_pull_up>, + <1 20 RK_FUNC_2 &pcfg_pull_up>, + <1 21 RK_FUNC_2 &pcfg_pull_up>, + <1 22 RK_FUNC_2 &pcfg_pull_up>, + <1 23 RK_FUNC_2 &pcfg_pull_up>, + <1 24 RK_FUNC_2 &pcfg_pull_up>, + <1 25 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + gmac { + rgmii_pins: rgmii-pins { + rockchip,pins = <3 22 RK_FUNC_1 &pcfg_pull_none>, + <3 24 RK_FUNC_1 &pcfg_pull_none>, + <3 19 RK_FUNC_1 &pcfg_pull_none>, + <3 8 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 9 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 10 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 14 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 28 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 13 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 15 RK_FUNC_1 &pcfg_pull_none>, + <3 16 RK_FUNC_1 &pcfg_pull_none>, + <3 17 RK_FUNC_1 &pcfg_pull_none>, + <3 18 RK_FUNC_1 &pcfg_pull_none>, + <3 25 RK_FUNC_1 &pcfg_pull_none>, + <3 20 RK_FUNC_1 &pcfg_pull_none>; + }; + + rmii_pins: rmii-pins { + rockchip,pins = <3 22 RK_FUNC_1 &pcfg_pull_none>, + <3 24 RK_FUNC_1 &pcfg_pull_none>, + <3 19 RK_FUNC_1 &pcfg_pull_none>, + <3 8 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 9 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 13 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 15 RK_FUNC_1 &pcfg_pull_none>, + <3 16 RK_FUNC_1 &pcfg_pull_none>, + <3 20 RK_FUNC_1 &pcfg_pull_none>, + <3 21 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>, + <0 7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <2 21 RK_FUNC_1 &pcfg_pull_none>, + <2 22 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = <0 9 RK_FUNC_2 &pcfg_pull_none>, + <3 31 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>, + <1 17 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c4 { + i2c4_xfer: i2c4-xfer { + rockchip,pins = <3 24 RK_FUNC_2 &pcfg_pull_none>, + <3 25 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + i2c5 { + i2c5_xfer: i2c5-xfer { + rockchip,pins = <3 26 RK_FUNC_2 &pcfg_pull_none>, + <3 27 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + sdio0 { + sdio0_bus1: sdio0-bus1 { + rockchip,pins = <2 28 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bus4: sdio0-bus4 { + rockchip,pins = <2 28 RK_FUNC_1 &pcfg_pull_up>, + <2 29 RK_FUNC_1 &pcfg_pull_up>, + <2 30 RK_FUNC_1 &pcfg_pull_up>, + <2 31 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = <3 0 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = <3 1 RK_FUNC_1 &pcfg_pull_none>; + }; + + sdio0_cd: sdio0-cd { + rockchip,pins = <3 2 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_wp: sdio0-wp { + rockchip,pins = <3 3 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_pwr: sdio0-pwr { + rockchip,pins = <3 4 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bkpwr: sdio0-bkpwr { + rockchip,pins = <3 5 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_int: sdio0-int { + rockchip,pins = <3 6 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_cd: sdmcc-cd { + rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up>, + <2 6 RK_FUNC_1 &pcfg_pull_up>, + <2 7 RK_FUNC_1 &pcfg_pull_up>, + <2 8 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = <1 29 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = <1 24 RK_FUNC_3 &pcfg_pull_up>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = <1 25 RK_FUNC_3 &pcfg_pull_up>; + }; + spi0_tx: spi0-tx { + rockchip,pins = <1 23 RK_FUNC_3 &pcfg_pull_up>; + }; + spi0_rx: spi0-rx { + rockchip,pins = <1 22 RK_FUNC_3 &pcfg_pull_up>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = <1 14 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = <1 15 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_cs1: spi1-cs1 { + rockchip,pins = <3 28 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_rx: spi1-rx { + rockchip,pins = <1 16 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_tx: spi1-tx { + rockchip,pins = <1 17 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + spi2 { + spi2_clk: spi2-clk { + rockchip,pins = <0 12 RK_FUNC_2 &pcfg_pull_up>; + }; + spi2_cs0: spi2-cs0 { + rockchip,pins = <0 13 RK_FUNC_2 &pcfg_pull_up>; + }; + spi2_rx: spi2-rx { + rockchip,pins = <0 10 RK_FUNC_2 &pcfg_pull_up>; + }; + spi2_tx: spi2-tx { + rockchip,pins = <0 11 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <2 24 RK_FUNC_1 &pcfg_pull_up>, + <2 25 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <2 27 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <0 20 RK_FUNC_3 &pcfg_pull_up>, + <0 21 RK_FUNC_3 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <0 22 RK_FUNC_3 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <0 23 RK_FUNC_3 &pcfg_pull_none>; + }; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <2 6 RK_FUNC_2 &pcfg_pull_up>, + <2 5 RK_FUNC_2 &pcfg_pull_none>; + }; + /* no rts / cts for uart2 */ + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = <3 29 RK_FUNC_2 &pcfg_pull_up>, + <3 30 RK_FUNC_3 &pcfg_pull_none>; + }; + + uart3_cts: uart3-cts { + rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none>; + }; + + uart3_rts: uart3-rts { + rockchip,pins = <3 17 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + uart4 { + uart4_xfer: uart4-xfer { + rockchip,pins = <0 27 RK_FUNC_3 &pcfg_pull_up>, + <0 26 RK_FUNC_3 &pcfg_pull_none>; + }; + + uart4_cts: uart4-cts { + rockchip,pins = <0 24 RK_FUNC_3 &pcfg_pull_none>; + }; + + uart4_rts: uart4-rts { + rockchip,pins = <0 25 RK_FUNC_3 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi index ee34e1a..63894c4 100644 --- a/arch/arm64/boot/dts/sprd/sc9836.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi @@ -16,28 +16,28 @@ #address-cells = <2>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; }; - cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; }; - cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x3>; @@ -75,14 +75,103 @@ }; }; - /* funnel input port 0~3 is reserved for ETMs */ + /* funnel input port 0-4 */ port@1 { + reg = <0>; + funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out>; + }; + }; + + port@2 { + reg = <1>; + funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out>; + }; + }; + + port@3 { + reg = <2>; + funnel_in_port2: endpoint { + slave-mode; + remote-endpoint = <&etm2_out>; + }; + }; + + port@4 { + reg = <3>; + funnel_in_port3: endpoint { + slave-mode; + remote-endpoint = <&etm3_out>; + }; + }; + + port@5 { reg = <4>; funnel_in_port4: endpoint { slave-mode; remote-endpoint = <&stm_out>; }; }; + /* Other input ports aren't connected to anyone */ + }; + }; + + etm@10440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x10440000 0 0x1000>; + + cpu = <&cpu0>; + clocks = <&clk26mhz>; + clock-names = "apb_pclk"; + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; + }; + }; + + etm@10540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x10540000 0 0x1000>; + + cpu = <&cpu1>; + clocks = <&clk26mhz>; + clock-names = "apb_pclk"; + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; + }; + }; + + etm@10640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x10640000 0 0x1000>; + + cpu = <&cpu2>; + clocks = <&clk26mhz>; + clock-names = "apb_pclk"; + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_in_port2>; + }; + }; + }; + + etm@10740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x10740000 0 0x1000>; + + cpu = <&cpu3>; + clocks = <&clk26mhz>; + clock-names = "apb_pclk"; + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_in_port3>; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts index 0a3f40e..ce5d848 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts @@ -32,6 +32,10 @@ }; }; +&can0 { + status = "okay"; +}; + &gem0 { status = "okay"; phy-handle = <&phy0>; @@ -42,6 +46,91 @@ }; }; +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + eeprom@54 { + compatible = "at,24c64"; + reg = <0x54>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + eeprom@55 { + compatible = "at,24c64"; + reg = <0x55>; + }; +}; + +&sata { + status = "okay"; + ceva,broken-gen2; +}; + +&sdhci0 { + status = "okay"; +}; + +&sdhci1 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + num-cs = <1>; + spi0_flash0: spi0_flash0@0 { + compatible = "m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + spi0_flash0@00000000 { + label = "spi0_flash0"; + reg = <0x0 0x100000>; + }; + }; +}; + +&spi1 { + status = "okay"; + num-cs = <1>; + spi1_flash0: spi1_flash0@0 { + compatible = "m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + spi1_flash0@00000000 { + label = "spi1_flash0"; + reg = <0x0 0x100000>; + }; + }; +}; + &uart0 { status = "okay"; }; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; + maximum-speed = "high-speed"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; + maximum-speed = "high-speed"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 11e0b00..857eda5 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -96,74 +96,38 @@ #size-cells = <1>; ranges; - misc_clk: misc_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - ttc0: timer@ff110000 { - compatible = "cdns,ttc"; - status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 36 4>, <0 37 4>, <0 38 4>; - reg = <0x0 0xff110000 0x1000>; - clocks = <&misc_clk>; - timer-width = <32>; - }; - - ttc1: timer@ff120000 { - compatible = "cdns,ttc"; - status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 39 4>, <0 40 4>, <0 41 4>; - reg = <0x0 0xff120000 0x1000>; - clocks = <&misc_clk>; - timer-width = <32>; - }; - - ttc2: timer@ff130000 { - compatible = "cdns,ttc"; - status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 42 4>, <0 43 4>, <0 44 4>; - reg = <0x0 0xff130000 0x1000>; - clocks = <&misc_clk>; - timer-width = <32>; - }; - - ttc3: timer@ff140000 { - compatible = "cdns,ttc"; + can0: can@ff060000 { + compatible = "xlnx,zynq-can-1.0"; status = "disabled"; + clocks = <&misc_clk &misc_clk>; + clock-names = "can_clk", "pclk"; + reg = <0x0 0xff060000 0x1000>; + interrupts = <0 23 4>; interrupt-parent = <&gic>; - interrupts = <0 45 4>, <0 46 4>, <0 47 4>; - reg = <0x0 0xff140000 0x1000>; - clocks = <&misc_clk>; - timer-width = <32>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; }; - uart0: serial@ff000000 { - compatible = "cdns,uart-r1p8"; + can1: can@ff070000 { + compatible = "xlnx,zynq-can-1.0"; status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 21 4>; - reg = <0x0 0xff000000 0x1000>; - clock-names = "uart_clk", "pclk"; clocks = <&misc_clk &misc_clk>; + clock-names = "can_clk", "pclk"; + reg = <0x0 0xff070000 0x1000>; + interrupts = <0 24 4>; + interrupt-parent = <&gic>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; }; - uart1: serial@ff010000 { - compatible = "cdns,uart-r1p8"; - status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 22 4>; - reg = <0x0 0xff010000 0x1000>; - clock-names = "uart_clk", "pclk"; - clocks = <&misc_clk &misc_clk>; + misc_clk: misc_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; }; gpio: gpio@ff0a0000 { - compatible = "xlnx,zynq-gpio-1.0"; + compatible = "xlnx,zynqmp-gpio-1.0"; status = "disabled"; #gpio-cells = <0x2>; clocks = <&misc_clk>; @@ -220,30 +184,6 @@ #size-cells = <0>; }; - spi0: spi@ff040000 { - compatible = "cdns,spi-r1p6"; - status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 19 4>; - reg = <0x0 0xff040000 0x1000>; - clock-names = "ref_clk", "pclk"; - clocks = <&misc_clk &misc_clk>; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@ff050000 { - compatible = "cdns,spi-r1p6"; - status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 20 4>; - reg = <0x0 0xff050000 0x1000>; - clock-names = "ref_clk", "pclk"; - clocks = <&misc_clk &misc_clk>; - #address-cells = <1>; - #size-cells = <0>; - }; - i2c_clk: i2c_clk { compatible = "fixed-clock"; #clock-cells = <0x0>; @@ -272,6 +212,21 @@ #size-cells = <0>; }; + sata_clk: sata_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <75000000>; + }; + + sata: ahci@fd0c0000 { + compatible = "ceva,ahci-1v84"; + status = "disabled"; + reg = <0x0 0xfd0c0000 0x2000>; + interrupt-parent = <&gic>; + interrupts = <0 133 4>; + clocks = <&sata_clk>; + }; + sdhci0: sdhci@ff160000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; @@ -292,6 +247,122 @@ clocks = <&misc_clk>, <&misc_clk>; }; + smmu: smmu@fd800000 { + compatible = "arm,mmu-500"; + reg = <0x0 0xfd800000 0x20000>; + #global-interrupts = <1>; + interrupt-parent = <&gic>; + interrupts = <0 157 4>, + <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>, + <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>, + <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>, + <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>; + }; + + spi0: spi@ff040000 { + compatible = "cdns,spi-r1p6"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 19 4>; + reg = <0x0 0xff040000 0x1000>; + clock-names = "ref_clk", "pclk"; + clocks = <&misc_clk &misc_clk>; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@ff050000 { + compatible = "cdns,spi-r1p6"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 20 4>; + reg = <0x0 0xff050000 0x1000>; + clock-names = "ref_clk", "pclk"; + clocks = <&misc_clk &misc_clk>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ttc0: timer@ff110000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 36 4>, <0 37 4>, <0 38 4>; + reg = <0x0 0xff110000 0x1000>; + clocks = <&misc_clk>; + timer-width = <32>; + }; + + ttc1: timer@ff120000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 39 4>, <0 40 4>, <0 41 4>; + reg = <0x0 0xff120000 0x1000>; + clocks = <&misc_clk>; + timer-width = <32>; + }; + + ttc2: timer@ff130000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 42 4>, <0 43 4>, <0 44 4>; + reg = <0x0 0xff130000 0x1000>; + clocks = <&misc_clk>; + timer-width = <32>; + }; + + ttc3: timer@ff140000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 45 4>, <0 46 4>, <0 47 4>; + reg = <0x0 0xff140000 0x1000>; + clocks = <&misc_clk>; + timer-width = <32>; + }; + + uart0: serial@ff000000 { + compatible = "cdns,uart-r1p8"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 21 4>; + reg = <0x0 0xff000000 0x1000>; + clock-names = "uart_clk", "pclk"; + clocks = <&misc_clk &misc_clk>; + }; + + uart1: serial@ff010000 { + compatible = "cdns,uart-r1p8"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 22 4>; + reg = <0x0 0xff010000 0x1000>; + clock-names = "uart_clk", "pclk"; + clocks = <&misc_clk &misc_clk>; + }; + + usb0: usb@fe200000 { + compatible = "snps,dwc3"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 65 4>; + reg = <0x0 0xfe200000 0x40000>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&misc_clk>, <&misc_clk>; + }; + + usb1: usb@fe300000 { + compatible = "snps,dwc3"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 70 4>; + reg = <0x0 0xfe300000 0x40000>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&misc_clk>, <&misc_clk>; + }; + watchdog0: watchdog@fd4d0000 { compatible = "cdns,wdt-r1p2"; status = "disabled"; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 4e17e7e..34d71dd 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -31,10 +31,13 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set +CONFIG_ARCH_BCM_IPROC=y +CONFIG_ARCH_BERLIN=y CONFIG_ARCH_EXYNOS7=y CONFIG_ARCH_FSL_LS2085A=y CONFIG_ARCH_HISI=y CONFIG_ARCH_MEDIATEK=y +CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_SEATTLE=y CONFIG_ARCH_TEGRA=y CONFIG_ARCH_TEGRA_132_SOC=y @@ -102,6 +105,7 @@ CONFIG_SERIO_AMBAKMI=y CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y diff --git a/arch/arm64/crypto/aes-ce-ccm-glue.c b/arch/arm64/crypto/aes-ce-ccm-glue.c index 3303e8a..f4bf2f2 100644 --- a/arch/arm64/crypto/aes-ce-ccm-glue.c +++ b/arch/arm64/crypto/aes-ce-ccm-glue.c @@ -124,7 +124,7 @@ static void ccm_calculate_auth_mac(struct aead_request *req, u8 mac[]) ce_aes_ccm_auth_data(mac, (u8 *)<ag, ltag.len, &macp, ctx->key_enc, num_rounds(ctx)); - scatterwalk_start(&walk, req->assoc); + scatterwalk_start(&walk, req->src); do { u32 n = scatterwalk_clamp(&walk, len); @@ -151,6 +151,10 @@ static int ccm_encrypt(struct aead_request *req) struct crypto_aes_ctx *ctx = crypto_aead_ctx(aead); struct blkcipher_desc desc = { .info = req->iv }; struct blkcipher_walk walk; + struct scatterlist srcbuf[2]; + struct scatterlist dstbuf[2]; + struct scatterlist *src; + struct scatterlist *dst; u8 __aligned(8) mac[AES_BLOCK_SIZE]; u8 buf[AES_BLOCK_SIZE]; u32 len = req->cryptlen; @@ -168,7 +172,12 @@ static int ccm_encrypt(struct aead_request *req) /* preserve the original iv for the final round */ memcpy(buf, req->iv, AES_BLOCK_SIZE); - blkcipher_walk_init(&walk, req->dst, req->src, len); + src = scatterwalk_ffwd(srcbuf, req->src, req->assoclen); + dst = src; + if (req->src != req->dst) + dst = scatterwalk_ffwd(dstbuf, req->dst, req->assoclen); + + blkcipher_walk_init(&walk, dst, src, len); err = blkcipher_aead_walk_virt_block(&desc, &walk, aead, AES_BLOCK_SIZE); @@ -194,7 +203,7 @@ static int ccm_encrypt(struct aead_request *req) return err; /* copy authtag to end of dst */ - scatterwalk_map_and_copy(mac, req->dst, req->cryptlen, + scatterwalk_map_and_copy(mac, dst, req->cryptlen, crypto_aead_authsize(aead), 1); return 0; @@ -207,6 +216,10 @@ static int ccm_decrypt(struct aead_request *req) unsigned int authsize = crypto_aead_authsize(aead); struct blkcipher_desc desc = { .info = req->iv }; struct blkcipher_walk walk; + struct scatterlist srcbuf[2]; + struct scatterlist dstbuf[2]; + struct scatterlist *src; + struct scatterlist *dst; u8 __aligned(8) mac[AES_BLOCK_SIZE]; u8 buf[AES_BLOCK_SIZE]; u32 len = req->cryptlen - authsize; @@ -224,7 +237,12 @@ static int ccm_decrypt(struct aead_request *req) /* preserve the original iv for the final round */ memcpy(buf, req->iv, AES_BLOCK_SIZE); - blkcipher_walk_init(&walk, req->dst, req->src, len); + src = scatterwalk_ffwd(srcbuf, req->src, req->assoclen); + dst = src; + if (req->src != req->dst) + dst = scatterwalk_ffwd(dstbuf, req->dst, req->assoclen); + + blkcipher_walk_init(&walk, dst, src, len); err = blkcipher_aead_walk_virt_block(&desc, &walk, aead, AES_BLOCK_SIZE); @@ -250,44 +268,42 @@ static int ccm_decrypt(struct aead_request *req) return err; /* compare calculated auth tag with the stored one */ - scatterwalk_map_and_copy(buf, req->src, req->cryptlen - authsize, + scatterwalk_map_and_copy(buf, src, req->cryptlen - authsize, authsize, 0); - if (memcmp(mac, buf, authsize)) + if (crypto_memneq(mac, buf, authsize)) return -EBADMSG; return 0; } -static struct crypto_alg ccm_aes_alg = { - .cra_name = "ccm(aes)", - .cra_driver_name = "ccm-aes-ce", - .cra_priority = 300, - .cra_flags = CRYPTO_ALG_TYPE_AEAD, - .cra_blocksize = 1, - .cra_ctxsize = sizeof(struct crypto_aes_ctx), - .cra_alignmask = 7, - .cra_type = &crypto_aead_type, - .cra_module = THIS_MODULE, - .cra_aead = { - .ivsize = AES_BLOCK_SIZE, - .maxauthsize = AES_BLOCK_SIZE, - .setkey = ccm_setkey, - .setauthsize = ccm_setauthsize, - .encrypt = ccm_encrypt, - .decrypt = ccm_decrypt, - } +static struct aead_alg ccm_aes_alg = { + .base = { + .cra_name = "ccm(aes)", + .cra_driver_name = "ccm-aes-ce", + .cra_priority = 300, + .cra_blocksize = 1, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_alignmask = 7, + .cra_module = THIS_MODULE, + }, + .ivsize = AES_BLOCK_SIZE, + .maxauthsize = AES_BLOCK_SIZE, + .setkey = ccm_setkey, + .setauthsize = ccm_setauthsize, + .encrypt = ccm_encrypt, + .decrypt = ccm_decrypt, }; static int __init aes_mod_init(void) { if (!(elf_hwcap & HWCAP_AES)) return -ENODEV; - return crypto_register_alg(&ccm_aes_alg); + return crypto_register_aead(&ccm_aes_alg); } static void __exit aes_mod_exit(void) { - crypto_unregister_alg(&ccm_aes_alg); + crypto_unregister_aead(&ccm_aes_alg); } module_init(aes_mod_init); diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild index b112a39..70fd9ff 100644 --- a/arch/arm64/include/asm/Kbuild +++ b/arch/arm64/include/asm/Kbuild @@ -25,6 +25,7 @@ generic-y += kvm_para.h generic-y += local.h generic-y += local64.h generic-y += mcs_spinlock.h +generic-y += mm-arch-hooks.h generic-y += mman.h generic-y += msgbuf.h generic-y += msi.h diff --git a/arch/arm64/include/asm/atomic.h b/arch/arm64/include/asm/atomic.h index 7047051..866a71f 100644 --- a/arch/arm64/include/asm/atomic.h +++ b/arch/arm64/include/asm/atomic.h @@ -85,6 +85,13 @@ static inline int atomic_##op##_return(int i, atomic_t *v) \ ATOMIC_OPS(add, add) ATOMIC_OPS(sub, sub) +#define atomic_andnot atomic_andnot + +ATOMIC_OP(and, and) +ATOMIC_OP(andnot, bic) +ATOMIC_OP(or, orr) +ATOMIC_OP(xor, eor) + #undef ATOMIC_OPS #undef ATOMIC_OP_RETURN #undef ATOMIC_OP @@ -183,6 +190,13 @@ static inline long atomic64_##op##_return(long i, atomic64_t *v) \ ATOMIC64_OPS(add, add) ATOMIC64_OPS(sub, sub) +#define atomic64_andnot atomic64_andnot + +ATOMIC64_OP(and, and) +ATOMIC64_OP(andnot, bic) +ATOMIC64_OP(or, orr) +ATOMIC64_OP(xor, eor) + #undef ATOMIC64_OPS #undef ATOMIC64_OP_RETURN #undef ATOMIC64_OP diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h index 0fa47c4..ef93b20 100644 --- a/arch/arm64/include/asm/barrier.h +++ b/arch/arm64/include/asm/barrier.h @@ -44,12 +44,12 @@ do { \ compiletime_assert_atomic_type(*p); \ barrier(); \ - ACCESS_ONCE(*p) = (v); \ + WRITE_ONCE(*p, v); \ } while (0) #define smp_load_acquire(p) \ ({ \ - typeof(*p) ___p1 = ACCESS_ONCE(*p); \ + typeof(*p) ___p1 = READ_ONCE(*p); \ compiletime_assert_atomic_type(*p); \ barrier(); \ ___p1; \ diff --git a/arch/arm64/include/asm/jump_label.h b/arch/arm64/include/asm/jump_label.h index c0e5165..1b5e0e8 100644 --- a/arch/arm64/include/asm/jump_label.h +++ b/arch/arm64/include/asm/jump_label.h @@ -26,14 +26,28 @@ #define JUMP_LABEL_NOP_SIZE AARCH64_INSN_SIZE -static __always_inline bool arch_static_branch(struct static_key *key) +static __always_inline bool arch_static_branch(struct static_key *key, bool branch) { asm goto("1: nop\n\t" ".pushsection __jump_table, \"aw\"\n\t" ".align 3\n\t" ".quad 1b, %l[l_yes], %c0\n\t" ".popsection\n\t" - : : "i"(key) : : l_yes); + : : "i"(&((char *)key)[branch]) : : l_yes); + + return false; +l_yes: + return true; +} + +static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch) +{ + asm goto("1: b %l[l_yes]\n\t" + ".pushsection __jump_table, \"aw\"\n\t" + ".align 3\n\t" + ".quad 1b, %l[l_yes], %c0\n\t" + ".popsection\n\t" + : : "i"(&((char *)key)[branch]) : : l_yes); return false; l_yes: diff --git a/arch/arm64/include/asm/mm-arch-hooks.h b/arch/arm64/include/asm/mm-arch-hooks.h deleted file mode 100644 index 562b655..0000000 --- a/arch/arm64/include/asm/mm-arch-hooks.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Architecture specific mm hooks - * - * Copyright (C) 2015, IBM Corporation - * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _ASM_ARM64_MM_ARCH_HOOKS_H -#define _ASM_ARM64_MM_ARCH_HOOKS_H - -#endif /* _ASM_ARM64_MM_ARCH_HOOKS_H */ diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c index 9d4aa18..e8ca6ea 100644 --- a/arch/arm64/kernel/efi.c +++ b/arch/arm64/kernel/efi.c @@ -122,12 +122,12 @@ static int __init uefi_init(void) /* Show what we know for posterity */ c16 = early_memremap(efi_to_phys(efi.systab->fw_vendor), - sizeof(vendor)); + sizeof(vendor) * sizeof(efi_char16_t)); if (c16) { for (i = 0; i < (int) sizeof(vendor) - 1 && *c16; ++i) vendor[i] = c16[i]; vendor[i] = '\0'; - early_memunmap(c16, sizeof(vendor)); + early_memunmap(c16, sizeof(vendor) * sizeof(efi_char16_t)); } pr_info("EFI v%u.%.02u by %s\n", diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index f860bfd..e163518 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -585,7 +585,8 @@ ENDPROC(el0_irq) * */ ENTRY(cpu_switch_to) - add x8, x0, #THREAD_CPU_CONTEXT + mov x10, #THREAD_CPU_CONTEXT + add x8, x0, x10 mov x9, sp stp x19, x20, [x8], #16 // store callee-saved registers stp x21, x22, [x8], #16 @@ -594,7 +595,7 @@ ENTRY(cpu_switch_to) stp x27, x28, [x8], #16 stp x29, x9, [x8], #16 str lr, [x8] - add x8, x1, #THREAD_CPU_CONTEXT + add x8, x1, x10 ldp x19, x20, [x8], #16 // restore callee-saved registers ldp x21, x22, [x8], #16 ldp x23, x24, [x8], #16 diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c index 240b75c..463fa2e 100644 --- a/arch/arm64/kernel/irq.c +++ b/arch/arm64/kernel/irq.c @@ -61,7 +61,7 @@ void __init init_IRQ(void) static bool migrate_one_irq(struct irq_desc *desc) { struct irq_data *d = irq_desc_get_irq_data(desc); - const struct cpumask *affinity = d->affinity; + const struct cpumask *affinity = irq_data_get_affinity_mask(d); struct irq_chip *c; bool ret = false; @@ -81,7 +81,7 @@ static bool migrate_one_irq(struct irq_desc *desc) if (!c->irq_set_affinity) pr_debug("IRQ%u: unable to set affinity\n", d->irq); else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret) - cpumask_copy(d->affinity, affinity); + cpumask_copy(irq_data_get_affinity_mask(d), affinity); return ret; } diff --git a/arch/arm64/kernel/jump_label.c b/arch/arm64/kernel/jump_label.c index 4f1fec7..c2dd1ad 100644 --- a/arch/arm64/kernel/jump_label.c +++ b/arch/arm64/kernel/jump_label.c @@ -28,7 +28,7 @@ void arch_jump_label_transform(struct jump_entry *entry, void *addr = (void *)entry->code; u32 insn; - if (type == JUMP_LABEL_ENABLE) { + if (type == JUMP_LABEL_JMP) { insn = aarch64_insn_gen_branch_imm(entry->code, entry->target, AARCH64_INSN_BRANCH_NOLINK); diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 96ce264..fdc11f0 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -34,7 +34,6 @@ #include <linux/kexec.h> #include <linux/crash_dump.h> #include <linux/root_dev.h> -#include <linux/clk-provider.h> #include <linux/cpu.h> #include <linux/interrupt.h> #include <linux/smp.h> diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c index 1670f15..948f0ad 100644 --- a/arch/arm64/kernel/signal32.c +++ b/arch/arm64/kernel/signal32.c @@ -168,7 +168,8 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from) * Other callers might not initialize the si_lsb field, * so check explicitely for the right codes here. */ - if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO) + if (from->si_signo == SIGBUS && + (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)) err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb); #endif break; @@ -201,8 +202,6 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from) int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) { - memset(to, 0, sizeof *to); - if (copy_from_user(to, from, __ARCH_SI_PREAMBLE_SIZE) || copy_from_user(to->_sifields._pad, from->_sifields._pad, SI_PAD_SIZE)) diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c index ec37ab3..97bc68f 100644 --- a/arch/arm64/kernel/vdso.c +++ b/arch/arm64/kernel/vdso.c @@ -199,16 +199,15 @@ up_fail: */ void update_vsyscall(struct timekeeper *tk) { - struct timespec xtime_coarse; u32 use_syscall = strcmp(tk->tkr_mono.clock->name, "arch_sys_counter"); ++vdso_data->tb_seq_count; smp_wmb(); - xtime_coarse = __current_kernel_time(); vdso_data->use_syscall = use_syscall; - vdso_data->xtime_coarse_sec = xtime_coarse.tv_sec; - vdso_data->xtime_coarse_nsec = xtime_coarse.tv_nsec; + vdso_data->xtime_coarse_sec = tk->xtime_sec; + vdso_data->xtime_coarse_nsec = tk->tkr_mono.xtime_nsec >> + tk->tkr_mono.shift; vdso_data->wtm_clock_sec = tk->wall_to_monotonic.tv_sec; vdso_data->wtm_clock_nsec = tk->wall_to_monotonic.tv_nsec; diff --git a/arch/arm64/kvm/inject_fault.c b/arch/arm64/kvm/inject_fault.c index f02530e..85c5715 100644 --- a/arch/arm64/kvm/inject_fault.c +++ b/arch/arm64/kvm/inject_fault.c @@ -168,8 +168,8 @@ void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr) { if (!(vcpu->arch.hcr_el2 & HCR_RW)) inject_abt32(vcpu, false, addr); - - inject_abt64(vcpu, false, addr); + else + inject_abt64(vcpu, false, addr); } /** @@ -184,8 +184,8 @@ void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr) { if (!(vcpu->arch.hcr_el2 & HCR_RW)) inject_abt32(vcpu, true, addr); - - inject_abt64(vcpu, true, addr); + else + inject_abt64(vcpu, true, addr); } /** @@ -198,6 +198,6 @@ void kvm_inject_undefined(struct kvm_vcpu *vcpu) { if (!(vcpu->arch.hcr_el2 & HCR_RW)) inject_undef32(vcpu); - - inject_undef64(vcpu); + else + inject_undef64(vcpu); } |
