summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-samsung/gpiolib.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-samsung/gpiolib.c')
-rw-r--r--arch/arm/plat-samsung/gpiolib.c199
1 files changed, 199 insertions, 0 deletions
diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c
new file mode 100644
index 0000000..8a8ba8b
--- /dev/null
+++ b/arch/arm/plat-samsung/gpiolib.c
@@ -0,0 +1,199 @@
+/* arch/arm/plat-samsung/gpiolib.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * SAMSUNG - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+#ifndef DEBUG_GPIO
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+/* The samsung_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ * bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
+ * the output.
+*/
+
+static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+
+ con = __raw_readl(base + GPIOCON_OFF);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, base + GPIOCON_OFF);
+
+ gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+ return 0;
+}
+
+static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+ unsigned long dat;
+
+ con = __raw_readl(base + GPIOCON_OFF);
+ con &= ~(0xf << con_4bit_shift(offset));
+ con |= 0x1 << con_4bit_shift(offset);
+
+ dat = __raw_readl(base + GPIODAT_OFF);
+
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(dat, base + GPIODAT_OFF);
+ __raw_writel(con, base + GPIOCON_OFF);
+ __raw_writel(dat, base + GPIODAT_OFF);
+
+ gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+ return 0;
+}
+
+/* The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ * bit n: data bit n
+ *
+ * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
+ * store the 'base + 0x4' address so that these routines see the data
+ * register at ourchip->base + 0x04.
+ */
+
+static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+
+ if (offset > 7)
+ offset -= 8;
+ else
+ regcon -= 4;
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, regcon);
+
+ gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
+
+ return 0;
+}
+
+static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+ unsigned long dat;
+ unsigned con_offset = offset;
+
+ if (con_offset > 7)
+ con_offset -= 8;
+ else
+ regcon -= 4;
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(con_offset));
+ con |= 0x1 << con_4bit_shift(con_offset);
+
+ dat = __raw_readl(base + GPIODAT_OFF);
+
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(dat, base + GPIODAT_OFF);
+ __raw_writel(con, regcon);
+ __raw_writel(dat, base + GPIODAT_OFF);
+
+ gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+ return 0;
+}
+
+void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
+{
+ chip->chip.direction_input = samsung_gpiolib_4bit_input;
+ chip->chip.direction_output = samsung_gpiolib_4bit_output;
+ chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
+{
+ chip->chip.direction_input = samsung_gpiolib_4bit2_input;
+ chip->chip.direction_output = samsung_gpiolib_4bit2_output;
+ chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
+ int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chip++) {
+ samsung_gpiolib_add_4bit(chip);
+ s3c_gpiolib_add(chip);
+ }
+}
+
+void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
+ int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chip++) {
+ samsung_gpiolib_add_4bit2(chip);
+ s3c_gpiolib_add(chip);
+ }
+}
OpenPOWER on IntegriCloud