diff options
Diffstat (limited to 'arch/arm/plat-s3c64xx/pm.c')
| -rw-r--r-- | arch/arm/plat-s3c64xx/pm.c | 175 |
1 files changed, 175 insertions, 0 deletions
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c new file mode 100644 index 0000000..07a6516 --- /dev/null +++ b/arch/arm/plat-s3c64xx/pm.c @@ -0,0 +1,175 @@ +/* linux/arch/arm/plat-s3c64xx/pm.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX CPU PM support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/serial_core.h> +#include <linux/io.h> + +#include <mach/map.h> + +#include <plat/pm.h> +#include <plat/regs-sys.h> +#include <plat/regs-gpio.h> +#include <plat/regs-clock.h> +#include <plat/regs-syscon-power.h> +#include <plat/regs-gpio-memport.h> + +#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK +#include <plat/gpio-bank-n.h> + +void s3c_pm_debug_smdkled(u32 set, u32 clear) +{ + unsigned long flags; + u32 reg; + + local_irq_save(flags); + reg = __raw_readl(S3C64XX_GPNCON); + reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | + S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15)); + reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | + S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15); + __raw_writel(reg, S3C64XX_GPNCON); + + reg = __raw_readl(S3C64XX_GPNDAT); + reg &= ~(clear << 12); + reg |= set << 12; + __raw_writel(reg, S3C64XX_GPNDAT); + + local_irq_restore(flags); +} +#endif + +static struct sleep_save core_save[] = { + SAVE_ITEM(S3C_APLL_LOCK), + SAVE_ITEM(S3C_MPLL_LOCK), + SAVE_ITEM(S3C_EPLL_LOCK), + SAVE_ITEM(S3C_CLK_SRC), + SAVE_ITEM(S3C_CLK_DIV0), + SAVE_ITEM(S3C_CLK_DIV1), + SAVE_ITEM(S3C_CLK_DIV2), + SAVE_ITEM(S3C_CLK_OUT), + SAVE_ITEM(S3C_HCLK_GATE), + SAVE_ITEM(S3C_PCLK_GATE), + SAVE_ITEM(S3C_SCLK_GATE), + SAVE_ITEM(S3C_MEM0_GATE), + + SAVE_ITEM(S3C_EPLL_CON1), + SAVE_ITEM(S3C_EPLL_CON0), + + SAVE_ITEM(S3C64XX_MEM0DRVCON), + SAVE_ITEM(S3C64XX_MEM1DRVCON), + +#ifndef CONFIG_CPU_FREQ + SAVE_ITEM(S3C_APLL_CON), + SAVE_ITEM(S3C_MPLL_CON), +#endif +}; + +static struct sleep_save misc_save[] = { + SAVE_ITEM(S3C64XX_AHB_CON0), + SAVE_ITEM(S3C64XX_AHB_CON1), + SAVE_ITEM(S3C64XX_AHB_CON2), + + SAVE_ITEM(S3C64XX_SPCON), + + SAVE_ITEM(S3C64XX_MEM0CONSTOP), + SAVE_ITEM(S3C64XX_MEM1CONSTOP), + SAVE_ITEM(S3C64XX_MEM0CONSLP0), + SAVE_ITEM(S3C64XX_MEM0CONSLP1), + SAVE_ITEM(S3C64XX_MEM1CONSLP), +}; + +void s3c_pm_configure_extint(void) +{ + __raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK); +} + +void s3c_pm_restore_core(void) +{ + __raw_writel(0, S3C64XX_EINT_MASK); + + s3c_pm_debug_smdkled(1 << 2, 0); + + s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); + s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); +} + +void s3c_pm_save_core(void) +{ + s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); + s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); +} + +/* since both s3c6400 and s3c6410 share the same sleep pm calls, we + * put the per-cpu code in here until any new cpu comes along and changes + * this. + */ + +#include <plat/regs-gpio.h> + +static void s3c64xx_cpu_suspend(void) +{ + unsigned long tmp; + + /* set our standby method to sleep */ + + tmp = __raw_readl(S3C64XX_PWR_CFG); + tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK; + tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP; + __raw_writel(tmp, S3C64XX_PWR_CFG); + + /* clear any old wakeup */ + + __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), + S3C64XX_WAKEUP_STAT); + + /* set the LED state to 0110 over sleep */ + s3c_pm_debug_smdkled(3 << 1, 0xf); + + /* issue the standby signal into the pm unit. Note, we + * issue a write-buffer drain just in case */ + + tmp = 0; + + asm("b 1f\n\t" + ".align 5\n\t" + "1:\n\t" + "mcr p15, 0, %0, c7, c10, 5\n\t" + "mcr p15, 0, %0, c7, c10, 4\n\t" + "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp)); + + /* we should never get past here */ + + panic("sleep resumed to originator?"); +} + +static void s3c64xx_pm_prepare(void) +{ + /* store address of resume. */ + __raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0); + + /* ensure previous wakeup state is cleared before sleeping */ + __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT); +} + +static int s3c64xx_pm_init(void) +{ + pm_cpu_prep = s3c64xx_pm_prepare; + pm_cpu_sleep = s3c64xx_cpu_suspend; + pm_uart_udivslot = 1; + return 0; +} + +arch_initcall(s3c64xx_pm_init); |
