97 files changed, 2264 insertions, 2577 deletions

diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 64b3f52..e2ea04a 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -27,6 +27,7 @@ config ARCH_OMAP4
 	bool "TI OMAP4"
 	select CPU_V7
 	select ARM_GIC
+	select COMMON_CLKDEV
 
 endchoice
 
@@ -42,28 +43,6 @@ config OMAP_DEBUG_LEDS
 	depends on OMAP_DEBUG_DEVICES
 	default y if LEDS || LEDS_OMAP_DEBUG
 
-config OMAP_DEBUG_POWERDOMAIN
-	bool "Emit debug messages from powerdomain layer"
-	depends on ARCH_OMAP2 || ARCH_OMAP3
-	help
-	  Say Y here if you want to compile in powerdomain layer
-	  debugging messages for OMAP2/3.   These messages can
-	  provide more detail as to why some powerdomain calls
-	  may be failing, and will also emit a descriptive message
-	  for every powerdomain register write.  However, the
-	  extra detail costs some memory.
-
-config OMAP_DEBUG_CLOCKDOMAIN
-	bool "Emit debug messages from clockdomain layer"
-	depends on ARCH_OMAP2 || ARCH_OMAP3
-	help
-	  Say Y here if you want to compile in clockdomain layer
-	  debugging messages for OMAP2/3.   These messages can
-	  provide more detail as to why some clockdomain calls
-	  may be failing, and will also emit a descriptive message
-	  for every clockdomain register write.  However, the
-	  extra detail costs some memory.
-
 config OMAP_RESET_CLOCKS
 	bool "Reset unused clocks during boot"
 	depends on ARCH_OMAP
@@ -78,28 +57,28 @@ config OMAP_RESET_CLOCKS
 
 config OMAP_MUX
 	bool "OMAP multiplexing support"
-        depends on ARCH_OMAP
+	depends on ARCH_OMAP
 	default y
-        help
-          Pin multiplexing support for OMAP boards. If your bootloader
-          sets the multiplexing correctly, say N. Otherwise, or if unsure,
-          say Y.
+	help
+	  Pin multiplexing support for OMAP boards. If your bootloader
+	  sets the multiplexing correctly, say N. Otherwise, or if unsure,
+	  say Y.
 
 config OMAP_MUX_DEBUG
 	bool "Multiplexing debug output"
-        depends on OMAP_MUX
-        help
-          Makes the multiplexing functions print out a lot of debug info.
-          This is useful if you want to find out the correct values of the
-          multiplexing registers.
+	depends on OMAP_MUX
+	help
+	  Makes the multiplexing functions print out a lot of debug info.
+	  This is useful if you want to find out the correct values of the
+	  multiplexing registers.
 
 config OMAP_MUX_WARNINGS
 	bool "Warn about pins the bootloader didn't set up"
-        depends on OMAP_MUX
-        default y
-        help
+	depends on OMAP_MUX
+	default y
+	help
 	  Choose Y here to warn whenever driver initialization logic needs
-	  to change the pin multiplexing setup.  When there are no warnings
+	  to change the pin multiplexing setup.	 When there are no warnings
 	  printed, it's safe to deselect OMAP_MUX for your product.
 
 config OMAP_MCBSP
@@ -125,7 +104,7 @@ config OMAP_IOMMU_DEBUG
 	tristate
 
 choice
-        prompt "System timer"
+	prompt "System timer"
 	default OMAP_MPU_TIMER
 
 config OMAP_MPU_TIMER
@@ -148,11 +127,11 @@ config OMAP_32K_TIMER
 endchoice
 
 config OMAP_32K_TIMER_HZ
-       int "Kernel internal timer frequency for 32KHz timer"
-       range 32 1024
-       depends on OMAP_32K_TIMER
-       default "128"
-       help
+	int "Kernel internal timer frequency for 32KHz timer"
+	range 32 1024
+	depends on OMAP_32K_TIMER
+	default "128"
+	help
 	  Kernel internal timer frequency should be a divisor of 32768,
 	  such as 64 or 128.
 
@@ -165,7 +144,7 @@ config OMAP_DM_TIMER
 choice
 	prompt "Low-level debug console UART"
 	depends on ARCH_OMAP
-	default OMAP_LL_DEBUG_UART1
+	default OMAP_LL_DEBUG_NONE
 
 config OMAP_LL_DEBUG_UART1
 	bool "UART1"
@@ -176,6 +155,9 @@ config OMAP_LL_DEBUG_UART2
 config OMAP_LL_DEBUG_UART3
 	bool "UART3"
 
+config OMAP_LL_DEBUG_NONE
+	bool "None"
+
 endchoice
 
 config OMAP_SERIAL_WAKE
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index bf880e9..89cafc9 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -24,7 +24,7 @@
 #include <linux/debugfs.h>
 #include <linux/io.h>
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
@@ -40,36 +40,10 @@ static struct clk_functions *arch_clock;
  * clock framework is not up , it is defined here to avoid rework in
  * every driver. Also dummy prcm reset function is added */
 
-/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */
-#if defined(CONFIG_ARCH_OMAP4)
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	return NULL;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-void omap2_clk_prepare_for_reboot(void)
-{
-}
-EXPORT_SYMBOL(omap2_clk_prepare_for_reboot);
-
-void omap_prcm_arch_reset(char mode)
-{
-}
-EXPORT_SYMBOL(omap_prcm_arch_reset);
-#endif
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
 	int ret = 0;
-	if (cpu_is_omap44xx())
-		/* OMAP4 clk framework not supported yet */
-		return 0;
 
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 3a4768d..bf1eaf3 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -29,13 +29,13 @@
 #include <asm/mach/map.h>
 #include <asm/setup.h>
 
-#include <mach/common.h>
-#include <mach/board.h>
-#include <mach/control.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/control.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/sdrc.h"
@@ -49,6 +49,9 @@ int omap_bootloader_tag_len;
 struct omap_board_config_kernel *omap_board_config;
 int omap_board_config_size;
 
+/* used by omap-smp.c and board-4430sdp.c */
+void __iomem *gic_cpu_base_addr;
+
 static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
 {
 	struct omap_board_config_kernel *kinfo = NULL;
@@ -224,12 +227,12 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 
 static struct omap_globals omap242x_globals = {
 	.class	= OMAP242X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x48014000),
-	.sdrc	= OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
-	.sms	= OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(0x48014000),
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
 };
 
 void __init omap2_set_globals_242x(void)
@@ -242,12 +245,12 @@ void __init omap2_set_globals_242x(void)
 
 static struct omap_globals omap243x_globals = {
 	.class	= OMAP243X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x4900a000),
-	.sdrc	= OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
-	.sms	= OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(0x4900a000),
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
 };
 
 void __init omap2_set_globals_243x(void)
@@ -260,12 +263,12 @@ void __init omap2_set_globals_243x(void)
 
 static struct omap_globals omap343x_globals = {
 	.class	= OMAP343X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x4830A000),
-	.sdrc	= OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
-	.sms	= OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
 };
 
 void __init omap2_set_globals_343x(void)
@@ -277,16 +280,18 @@ void __init omap2_set_globals_343x(void)
 #if defined(CONFIG_ARCH_OMAP4)
 static struct omap_globals omap4_globals = {
 	.class	= OMAP443X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x4830a000),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
+	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
 };
 
 void __init omap2_set_globals_443x(void)
 {
 	omap2_set_globals_tap(&omap4_globals);
 	omap2_set_globals_control(&omap4_globals);
+	omap2_set_globals_prcm(&omap4_globals);
 }
 #endif
 
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 341235c..f8ddbdd 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/clock.h>
+#include <plat/clock.h>
 #include <asm/system.h>
 
 #define VERY_HI_RATE	900000000
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index f668483..923c962 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -13,10 +13,11 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 
-#include <mach/board.h>
+#include <plat/board.h>
 #include <mach/gpio.h>
 
 
@@ -24,6 +25,12 @@
  * platforms include H2, H3, H4, and Perseus2.
  */
 
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.flags  = IORESOURCE_MEM,
@@ -36,6 +43,9 @@ static struct resource smc91x_resources[] = {
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
 };
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 9395898..53fcef7 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -18,7 +18,7 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
 
 
@@ -293,7 +293,7 @@ static int fpga_resume_noirq(struct device *dev)
 	return 0;
 }
 
-static struct dev_pm_ops fpga_dev_pm_ops = {
+static const struct dev_pm_ops fpga_dev_pm_ops = {
 	.suspend_noirq = fpga_suspend_noirq,
 	.resume_noirq = fpga_resume_noirq,
 };
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index a64b692..30b5db7 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -19,15 +19,15 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
-#include <mach/control.h>
-#include <mach/board.h>
-#include <mach/mmc.h>
-#include <mach/mux.h>
+#include <plat/tc.h>
+#include <plat/control.h>
+#include <plat/board.h>
+#include <plat/mmc.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/menelaus.h>
-#include <mach/mcbsp.h>
-#include <mach/dsp_common.h>
+#include <plat/menelaus.h>
+#include <plat/mcbsp.h>
+#include <plat/dsp_common.h>
 
 #if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 
@@ -113,17 +113,17 @@ static void omap_init_kp(void)
 		omap_cfg_reg(E19_1610_KBR4);
 		omap_cfg_reg(N19_1610_KBR5);
 	} else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
-		omap_cfg_reg(E2_730_KBR0);
-		omap_cfg_reg(J7_730_KBR1);
-		omap_cfg_reg(E1_730_KBR2);
-		omap_cfg_reg(F3_730_KBR3);
-		omap_cfg_reg(D2_730_KBR4);
-
-		omap_cfg_reg(C2_730_KBC0);
-		omap_cfg_reg(D3_730_KBC1);
-		omap_cfg_reg(E4_730_KBC2);
-		omap_cfg_reg(F4_730_KBC3);
-		omap_cfg_reg(E3_730_KBC4);
+		omap_cfg_reg(E2_7XX_KBR0);
+		omap_cfg_reg(J7_7XX_KBR1);
+		omap_cfg_reg(E1_7XX_KBR2);
+		omap_cfg_reg(F3_7XX_KBR3);
+		omap_cfg_reg(D2_7XX_KBR4);
+
+		omap_cfg_reg(C2_7XX_KBC0);
+		omap_cfg_reg(D3_7XX_KBC1);
+		omap_cfg_reg(E4_7XX_KBC2);
+		omap_cfg_reg(F4_7XX_KBC3);
+		omap_cfg_reg(E3_7XX_KBC4);
 	} else if (machine_is_omap_h4()) {
 		omap_cfg_reg(T19_24XX_KBR0);
 		omap_cfg_reg(R19_24XX_KBR1);
@@ -242,6 +242,39 @@ fail:
 
 /*-------------------------------------------------------------------------*/
 
+#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#define	OMAP_RNG_BASE		0x480A0000
+#else
+#define	OMAP_RNG_BASE		0xfffe5000
+#endif
+
+static struct resource rng_resources[] = {
+	{
+		.start		= OMAP_RNG_BASE,
+		.end		= OMAP_RNG_BASE + 0x4f,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap_rng_device = {
+	.name		= "omap_rng",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rng_resources),
+	.resource	= rng_resources,
+};
+
+static void omap_init_rng(void)
+{
+	(void) platform_device_register(&omap_rng_device);
+}
+#else
+static inline void omap_init_rng(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
 /* Numbering for the SPI-capable controllers when used for SPI:
  * spi		= 1
  * uwire	= 2
@@ -324,39 +357,6 @@ static void omap_init_wdt(void)
 static inline void omap_init_wdt(void) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
-
-#ifdef CONFIG_ARCH_OMAP24XX
-#define	OMAP_RNG_BASE		0x480A0000
-#else
-#define	OMAP_RNG_BASE		0xfffe5000
-#endif
-
-static struct resource rng_resources[] = {
-	{
-		.start		= OMAP_RNG_BASE,
-		.end		= OMAP_RNG_BASE + 0x4f,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_rng_device = {
-	.name	   = "omap_rng",
-	.id	     = -1,
-	.num_resources	= ARRAY_SIZE(rng_resources),
-	.resource	= rng_resources,
-};
-
-static void omap_init_rng(void)
-{
-	(void) platform_device_register(&omap_rng_device);
-}
-#else
-static inline void omap_init_rng(void) {}
-#endif
-
 /*
  * This gets called after board-specific INIT_MACHINE, and initializes most
  * on-chip peripherals accessible on this board (except for few like USB):
@@ -384,9 +384,9 @@ static int __init omap_init_devices(void)
 	 */
 	omap_init_dsp();
 	omap_init_kp();
+	omap_init_rng();
 	omap_init_uwire();
 	omap_init_wdt();
-	omap_init_rng();
 	return 0;
 }
 arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 68eaae3..09d82b3 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -32,9 +32,9 @@
 
 #include <asm/system.h>
 #include <mach/hardware.h>
-#include <mach/dma.h>
+#include <plat/dma.h>
 
-#include <mach/tc.h>
+#include <plat/tc.h>
 
 #undef DEBUG
 
@@ -47,13 +47,18 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
 #endif
 
 #define OMAP_DMA_ACTIVE			0x01
-#define OMAP_DMA_CCR_EN			(1 << 7)
 #define OMAP2_DMA_CSR_CLEAR_MASK	0xffe
 
 #define OMAP_FUNC_MUX_ARM_BASE		(0xfffe1000 + 0xec)
 
 static int enable_1510_mode;
 
+static struct omap_dma_global_context_registers {
+	u32 dma_irqenable_l0;
+	u32 dma_ocp_sysconfig;
+	u32 dma_gcr;
+} omap_dma_global_context;
+
 struct omap_dma_lch {
 	int next_lch;
 	int dev_id;
@@ -1114,17 +1119,8 @@ int omap_dma_running(void)
 {
 	int lch;
 
-	/*
-	 * On OMAP1510, internal LCD controller will start the transfer
-	 * when it gets enabled, so assume DMA running if LCD enabled.
-	 */
-	if (cpu_is_omap1510())
-		if (omap_readw(0xfffec000 + 0x00) & (1 << 0))
-			return 1;
-
-	/* Check if LCD DMA is running */
-	if (cpu_is_omap16xx())
-		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+	if (cpu_class_is_omap1())
+		if (omap_lcd_dma_running())
 			return 1;
 
 	for (lch = 0; lch < dma_chan_count; lch++)
@@ -1246,7 +1242,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
  * 					      OMAP_DMA_DYNAMIC_CHAIN
  * @params - Channel parameters
  *
- * @return - Succes : 0
+ * @return - Success : 0
  * 	     Failure: -EINVAL/-ENOMEM
  */
 int omap_request_dma_chain(int dev_id, const char *dev_name,
@@ -1984,415 +1980,83 @@ static struct irqaction omap24xx_dma_irq;
 
 /*----------------------------------------------------------------------------*/
 
-static struct lcd_dma_info {
-	spinlock_t lock;
-	int reserved;
-	void (*callback)(u16 status, void *data);
-	void *cb_data;
-
-	int active;
-	unsigned long addr, size;
-	int rotate, data_type, xres, yres;
-	int vxres;
-	int mirror;
-	int xscale, yscale;
-	int ext_ctrl;
-	int src_port;
-	int single_transfer;
-} lcd_dma;
-
-void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-			 int data_type)
-{
-	lcd_dma.addr = addr;
-	lcd_dma.data_type = data_type;
-	lcd_dma.xres = fb_xres;
-	lcd_dma.yres = fb_yres;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1);
-
-void omap_set_lcd_dma_src_port(int port)
-{
-	lcd_dma.src_port = port;
-}
-
-void omap_set_lcd_dma_ext_controller(int external)
-{
-	lcd_dma.ext_ctrl = external;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
-
-void omap_set_lcd_dma_single_transfer(int single)
-{
-	lcd_dma.single_transfer = single;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
-
-void omap_set_lcd_dma_b1_rotation(int rotate)
-{
-	if (omap_dma_in_1510_mode()) {
-		printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
-		BUG();
-		return;
-	}
-	lcd_dma.rotate = rotate;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
-
-void omap_set_lcd_dma_b1_mirror(int mirror)
-{
-	if (omap_dma_in_1510_mode()) {
-		printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.mirror = mirror;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
-
-void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
-{
-	if (omap_dma_in_1510_mode()) {
-		printk(KERN_ERR "DMA virtual resulotion is not supported "
-				"in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.vxres = vxres;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
-
-void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
-{
-	if (omap_dma_in_1510_mode()) {
-		printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.xscale = xscale;
-	lcd_dma.yscale = yscale;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
-
-static void set_b1_regs(void)
-{
-	unsigned long top, bottom;
-	int es;
-	u16 w;
-	unsigned long en, fn;
-	long ei, fi;
-	unsigned long vxres;
-	unsigned int xscale, yscale;
-
-	switch (lcd_dma.data_type) {
-	case OMAP_DMA_DATA_TYPE_S8:
-		es = 1;
-		break;
-	case OMAP_DMA_DATA_TYPE_S16:
-		es = 2;
-		break;
-	case OMAP_DMA_DATA_TYPE_S32:
-		es = 4;
-		break;
-	default:
-		BUG();
-		return;
-	}
-
-	vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
-	xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
-	yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
-	BUG_ON(vxres < lcd_dma.xres);
-
-#define PIXADDR(x, y) (lcd_dma.addr +					\
-		((y) * vxres * yscale + (x) * xscale) * es)
-#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
-
-	switch (lcd_dma.rotate) {
-	case 0:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(0, 0);
-			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			/* 1510 DMA requires the bottom address to be 2 more
-			 * than the actual last memory access location. */
-			if (omap_dma_in_1510_mode() &&
-				lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
-					bottom += 2;
-			ei = PIXSTEP(0, 0, 1, 0);
-			fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
-		} else {
-			top = PIXADDR(lcd_dma.xres - 1, 0);
-			bottom = PIXADDR(0, lcd_dma.yres - 1);
-			ei = PIXSTEP(1, 0, 0, 0);
-			fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
-		}
-		en = lcd_dma.xres;
-		fn = lcd_dma.yres;
-		break;
-	case 90:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(0, lcd_dma.yres - 1);
-			bottom = PIXADDR(lcd_dma.xres - 1, 0);
-			ei = PIXSTEP(0, 1, 0, 0);
-			fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
-		} else {
-			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			bottom = PIXADDR(0, 0);
-			ei = PIXSTEP(0, 1, 0, 0);
-			fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
-		}
-		en = lcd_dma.yres;
-		fn = lcd_dma.xres;
-		break;
-	case 180:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			bottom = PIXADDR(0, 0);
-			ei = PIXSTEP(1, 0, 0, 0);
-			fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
-		} else {
-			top = PIXADDR(0, lcd_dma.yres - 1);
-			bottom = PIXADDR(lcd_dma.xres - 1, 0);
-			ei = PIXSTEP(0, 0, 1, 0);
-			fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
-		}
-		en = lcd_dma.xres;
-		fn = lcd_dma.yres;
-		break;
-	case 270:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(lcd_dma.xres - 1, 0);
-			bottom = PIXADDR(0, lcd_dma.yres - 1);
-			ei = PIXSTEP(0, 0, 0, 1);
-			fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
-		} else {
-			top = PIXADDR(0, 0);
-			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			ei = PIXSTEP(0, 0, 0, 1);
-			fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
-		}
-		en = lcd_dma.yres;
-		fn = lcd_dma.xres;
-		break;
-	default:
-		BUG();
-		return;	/* Suppress warning about uninitialized vars */
-	}
-
-	if (omap_dma_in_1510_mode()) {
-		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
-		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
-		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
-		omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
-
-		return;
-	}
-
-	/* 1610 regs */
-	omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
-	omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
-	omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
-	omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
-
-	omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
-	omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CSDP);
-	w &= ~0x03;
-	w |= lcd_dma.data_type;
-	omap_writew(w, OMAP1610_DMA_LCD_CSDP);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	/* Always set the source port as SDRAM for now*/
-	w &= ~(0x03 << 6);
-	if (lcd_dma.callback != NULL)
-		w |= 1 << 1;		/* Block interrupt enable */
-	else
-		w &= ~(1 << 1);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-
-	if (!(lcd_dma.rotate || lcd_dma.mirror ||
-	      lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	/* Set the double-indexed addressing mode */
-	w |= (0x03 << 12);
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
-	omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
-	omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
-	omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
-}
-
-static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
+void omap_dma_global_context_save(void)
 {
-	u16 w;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	if (unlikely(!(w & (1 << 3)))) {
-		printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
-		return IRQ_NONE;
-	}
-	/* Ack the IRQ */
-	w |= (1 << 3);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-	lcd_dma.active = 0;
-	if (lcd_dma.callback != NULL)
-		lcd_dma.callback(w, lcd_dma.cb_data);
-
-	return IRQ_HANDLED;
-}
-
-int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-			 void *data)
-{
-	spin_lock_irq(&lcd_dma.lock);
-	if (lcd_dma.reserved) {
-		spin_unlock_irq(&lcd_dma.lock);
-		printk(KERN_ERR "LCD DMA channel already reserved\n");
-		BUG();
-		return -EBUSY;
-	}
-	lcd_dma.reserved = 1;
-	spin_unlock_irq(&lcd_dma.lock);
-	lcd_dma.callback = callback;
-	lcd_dma.cb_data = data;
-	lcd_dma.active = 0;
-	lcd_dma.single_transfer = 0;
-	lcd_dma.rotate = 0;
-	lcd_dma.vxres = 0;
-	lcd_dma.mirror = 0;
-	lcd_dma.xscale = 0;
-	lcd_dma.yscale = 0;
-	lcd_dma.ext_ctrl = 0;
-	lcd_dma.src_port = 0;
-
-	return 0;
+	omap_dma_global_context.dma_irqenable_l0 =
+		dma_read(IRQENABLE_L0);
+	omap_dma_global_context.dma_ocp_sysconfig =
+		dma_read(OCP_SYSCONFIG);
+	omap_dma_global_context.dma_gcr = dma_read(GCR);
 }
-EXPORT_SYMBOL(omap_request_lcd_dma);
 
-void omap_free_lcd_dma(void)
+void omap_dma_global_context_restore(void)
 {
-	spin_lock(&lcd_dma.lock);
-	if (!lcd_dma.reserved) {
-		spin_unlock(&lcd_dma.lock);
-		printk(KERN_ERR "LCD DMA is not reserved\n");
-		BUG();
-		return;
-	}
-	if (!enable_1510_mode)
-		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
-			    OMAP1610_DMA_LCD_CCR);
-	lcd_dma.reserved = 0;
-	spin_unlock(&lcd_dma.lock);
-}
-EXPORT_SYMBOL(omap_free_lcd_dma);
+	int ch;
 
-void omap_enable_lcd_dma(void)
-{
-	u16 w;
+	dma_write(omap_dma_global_context.dma_gcr, GCR);
+	dma_write(omap_dma_global_context.dma_ocp_sysconfig,
+		OCP_SYSCONFIG);
+	dma_write(omap_dma_global_context.dma_irqenable_l0,
+		IRQENABLE_L0);
 
 	/*
-	 * Set the Enable bit only if an external controller is
-	 * connected. Otherwise the OMAP internal controller will
-	 * start the transfer when it gets enabled.
+	 * A bug in ROM code leaves IRQ status for channels 0 and 1 uncleared
+	 * after secure sram context save and restore. Hence we need to
+	 * manually clear those IRQs to avoid spurious interrupts. This
+	 * affects only secure devices.
 	 */
-	if (enable_1510_mode || !lcd_dma.ext_ctrl)
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	w |= 1 << 8;
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-
-	lcd_dma.active = 1;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	w |= 1 << 7;
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-}
-EXPORT_SYMBOL(omap_enable_lcd_dma);
-
-void omap_setup_lcd_dma(void)
-{
-	BUG_ON(lcd_dma.active);
-	if (!enable_1510_mode) {
-		/* Set some reasonable defaults */
-		omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
-		omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
-		omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
-	}
-	set_b1_regs();
-	if (!enable_1510_mode) {
-		u16 w;
-
-		w = omap_readw(OMAP1610_DMA_LCD_CCR);
-		/*
-		 * If DMA was already active set the end_prog bit to have
-		 * the programmed register set loaded into the active
-		 * register set.
-		 */
-		w |= 1 << 11;		/* End_prog */
-		if (!lcd_dma.single_transfer)
-			w |= (3 << 8);	/* Auto_init, repeat */
-		omap_writew(w, OMAP1610_DMA_LCD_CCR);
-	}
-}
-EXPORT_SYMBOL(omap_setup_lcd_dma);
-
-void omap_stop_lcd_dma(void)
-{
-	u16 w;
+	if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+		dma_write(0x3 , IRQSTATUS_L0);
 
-	lcd_dma.active = 0;
-	if (enable_1510_mode || !lcd_dma.ext_ctrl)
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	w &= ~(1 << 7);
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	w &= ~(1 << 8);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+	for (ch = 0; ch < dma_chan_count; ch++)
+		if (dma_chan[ch].dev_id != -1)
+			omap_clear_dma(ch);
 }
-EXPORT_SYMBOL(omap_stop_lcd_dma);
 
 /*----------------------------------------------------------------------------*/
 
 static int __init omap_init_dma(void)
 {
+	unsigned long base;
 	int ch, r;
 
 	if (cpu_class_is_omap1()) {
-		omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
+		base = OMAP1_DMA_BASE;
 		dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap24xx()) {
-		omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
+		base = OMAP24XX_DMA4_BASE;
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap34xx()) {
-		omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
+		base = OMAP34XX_DMA4_BASE;
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap44xx()) {
-		omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
+		base = OMAP44XX_DMA4_BASE;
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else {
 		pr_err("DMA init failed for unsupported omap\n");
 		return -ENODEV;
 	}
 
+	omap_dma_base = ioremap(base, SZ_4K);
+	BUG_ON(!omap_dma_base);
+
 	if (cpu_class_is_omap2() && omap_dma_reserve_channels
 			&& (omap_dma_reserve_channels <= dma_lch_count))
 		dma_lch_count = omap_dma_reserve_channels;
 
 	dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
 				GFP_KERNEL);
-	if (!dma_chan)
-		return -ENOMEM;
+	if (!dma_chan) {
+		r = -ENOMEM;
+		goto out_unmap;
+	}
 
 	if (cpu_class_is_omap2()) {
 		dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
 						dma_lch_count, GFP_KERNEL);
 		if (!dma_linked_lch) {
-			kfree(dma_chan);
-			return -ENOMEM;
+			r = -ENOMEM;
+			goto out_free;
 		}
 	}
 
@@ -2420,14 +2084,6 @@ static int __init omap_init_dma(void)
 			dma_chan_count = 16;
 		} else
 			dma_chan_count = 9;
-		if (cpu_is_omap16xx()) {
-			u16 w;
-
-			/* this would prevent OMAP sleep */
-			w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-			w &= ~(1 << 8);
-			omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-		}
 	} else if (cpu_class_is_omap2()) {
 		u8 revision = dma_read(REVISION) & 0xff;
 		printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
@@ -2438,7 +2094,6 @@ static int __init omap_init_dma(void)
 		return 0;
 	}
 
-	spin_lock_init(&lcd_dma.lock);
 	spin_lock_init(&dma_chan_lock);
 
 	for (ch = 0; ch < dma_chan_count; ch++) {
@@ -2466,7 +2121,7 @@ static int __init omap_init_dma(void)
 				for (i = 0; i < ch; i++)
 					free_irq(omap1_dma_irq[i],
 						 (void *) (i + 1));
-				return r;
+				goto out_free;
 			}
 		}
 	}
@@ -2484,8 +2139,8 @@ static int __init omap_init_dma(void)
 		setup_irq(irq, &omap24xx_dma_irq);
 	}
 
-	/* Enable smartidle idlemodes and autoidle */
 	if (cpu_is_omap34xx()) {
+		/* Enable smartidle idlemodes and autoidle */
 		u32 v = dma_read(OCP_SYSCONFIG);
 		v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
 				DMA_SYSCONFIG_SIDLEMODE_MASK |
@@ -2494,25 +2149,24 @@ static int __init omap_init_dma(void)
 			DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
 			DMA_SYSCONFIG_AUTOIDLE);
 		dma_write(v , OCP_SYSCONFIG);
-	}
-
-
-	/* FIXME: Update LCD DMA to work on 24xx */
-	if (cpu_class_is_omap1()) {
-		r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
-				"LCD DMA", NULL);
-		if (r != 0) {
-			int i;
-
-			printk(KERN_ERR "unable to request IRQ for LCD DMA "
-			       "(error %d)\n", r);
-			for (i = 0; i < dma_chan_count; i++)
-				free_irq(omap1_dma_irq[i], (void *) (i + 1));
-			return r;
+		/* reserve dma channels 0 and 1 in high security devices */
+		if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+			printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
+					"HS ROM code\n");
+			dma_chan[0].dev_id = 0;
+			dma_chan[1].dev_id = 1;
 		}
 	}
 
 	return 0;
+
+out_free:
+	kfree(dma_chan);
+
+out_unmap:
+	iounmap(omap_dma_base);
+
+	return r;
 }
 
 arch_initcall(omap_init_dma);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index d325b54..64f407e 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -38,7 +38,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <mach/hardware.h>
-#include <mach/dmtimer.h>
+#include <plat/dmtimer.h>
 #include <mach/irqs.h>
 
 /* register offsets */
@@ -742,16 +742,17 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active);
 int __init omap_dm_timer_init(void)
 {
 	struct omap_dm_timer *timer;
-	int i;
+	int i, map_size = SZ_8K;	/* Module 4KB + L4 4KB except on omap1 */
 
 	if (!(cpu_is_omap16xx() || cpu_class_is_omap2()))
 		return -ENODEV;
 
 	spin_lock_init(&dm_timer_lock);
 
-	if (cpu_class_is_omap1())
+	if (cpu_class_is_omap1()) {
 		dm_timers = omap1_dm_timers;
-	else if (cpu_is_omap24xx()) {
+		map_size = SZ_2K;
+	} else if (cpu_is_omap24xx()) {
 		dm_timers = omap2_dm_timers;
 		dm_source_names = omap2_dm_source_names;
 		dm_source_clocks = omap2_dm_source_clocks;
@@ -774,10 +775,11 @@ int __init omap_dm_timer_init(void)
 
 	for (i = 0; i < dm_timer_count; i++) {
 		timer = &dm_timers[i];
-		if (cpu_class_is_omap1())
-			timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base);
-		else
-			timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base);
+
+		/* Static mapping, never released */
+		timer->io_base = ioremap(timer->phys_base, map_size);
+		BUG_ON(!timer->io_base);
+
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 					defined(CONFIG_ARCH_OMAP4)
 		if (cpu_class_is_omap2()) {
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 3746222..d3eea4f 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -28,13 +28,13 @@
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
 #include <linux/io.h>
+#include <linux/omapfb.h>
 
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/sram.h>
-#include <mach/omapfb.h>
+#include <plat/board.h>
+#include <plat/sram.h>
 
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
@@ -55,6 +55,10 @@ static struct platform_device omap_fb_device = {
 	.num_resources = 0,
 };
 
+void omapfb_set_platform_data(struct omapfb_platform_data *data)
+{
+}
+
 static inline int ranges_overlap(unsigned long start1, unsigned long size1,
 				 unsigned long start2, unsigned long size2)
 {
@@ -327,7 +331,33 @@ static inline int omap_init_fb(void)
 
 arch_initcall(omap_init_fb);
 
-#else
+#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+
+static u64 omap_fb_dma_mask = ~(u32)0;
+static struct omapfb_platform_data omapfb_config;
+
+static struct platform_device omap_fb_device = {
+	.name		= "omapfb",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &omap_fb_dma_mask,
+		.coherent_dma_mask	= ~(u32)0,
+		.platform_data		= &omapfb_config,
+	},
+	.num_resources = 0,
+};
+
+void omapfb_set_platform_data(struct omapfb_platform_data *data)
+{
+	omapfb_config = *data;
+}
+
+static inline int omap_init_fb(void)
+{
+	return platform_device_register(&omap_fb_device);
+}
+
+arch_initcall(omap_init_fb);
 
 void omapfb_reserve_sdram(void) {}
 unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
@@ -339,5 +369,20 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
 	return 0;
 }
 
+#else
+
+void omapfb_set_platform_data(struct omapfb_platform_data *data)
+{
+}
+
+void omapfb_reserve_sdram(void) {}
+unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
+				  unsigned long sram_vstart,
+				  unsigned long sram_size,
+				  unsigned long start_avail,
+				  unsigned long size_avail)
+{
+	return 0;
+}
 
 #endif
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7c345b7..0484681 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -31,7 +31,7 @@
 /*
  * OMAP1510 GPIO registers
  */
-#define OMAP1510_GPIO_BASE		OMAP1_IO_ADDRESS(0xfffce000)
+#define OMAP1510_GPIO_BASE		0xfffce000
 #define OMAP1510_GPIO_DATA_INPUT	0x00
 #define OMAP1510_GPIO_DATA_OUTPUT	0x04
 #define OMAP1510_GPIO_DIR_CONTROL	0x08
@@ -45,10 +45,10 @@
 /*
  * OMAP1610 specific GPIO registers
  */
-#define OMAP1610_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbe400)
-#define OMAP1610_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbec00)
-#define OMAP1610_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbb400)
-#define OMAP1610_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbbc00)
+#define OMAP1610_GPIO1_BASE		0xfffbe400
+#define OMAP1610_GPIO2_BASE		0xfffbec00
+#define OMAP1610_GPIO3_BASE		0xfffbb400
+#define OMAP1610_GPIO4_BASE		0xfffbbc00
 #define OMAP1610_GPIO_REVISION		0x0000
 #define OMAP1610_GPIO_SYSCONFIG		0x0010
 #define OMAP1610_GPIO_SYSSTATUS		0x0014
@@ -68,52 +68,36 @@
 #define OMAP1610_GPIO_SET_DATAOUT	0x00f0
 
 /*
- * OMAP730 specific GPIO registers
+ * OMAP7XX specific GPIO registers
  */
-#define OMAP730_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbc000)
-#define OMAP730_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbc800)
-#define OMAP730_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbd000)
-#define OMAP730_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbd800)
-#define OMAP730_GPIO5_BASE		OMAP1_IO_ADDRESS(0xfffbe000)
-#define OMAP730_GPIO6_BASE		OMAP1_IO_ADDRESS(0xfffbe800)
-#define OMAP730_GPIO_DATA_INPUT		0x00
-#define OMAP730_GPIO_DATA_OUTPUT	0x04
-#define OMAP730_GPIO_DIR_CONTROL	0x08
-#define OMAP730_GPIO_INT_CONTROL	0x0c
-#define OMAP730_GPIO_INT_MASK		0x10
-#define OMAP730_GPIO_INT_STATUS		0x14
-
-/*
- * OMAP850 specific GPIO registers
- */
-#define OMAP850_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbc000)
-#define OMAP850_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbc800)
-#define OMAP850_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbd000)
-#define OMAP850_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbd800)
-#define OMAP850_GPIO5_BASE		OMAP1_IO_ADDRESS(0xfffbe000)
-#define OMAP850_GPIO6_BASE		OMAP1_IO_ADDRESS(0xfffbe800)
-#define OMAP850_GPIO_DATA_INPUT		0x00
-#define OMAP850_GPIO_DATA_OUTPUT	0x04
-#define OMAP850_GPIO_DIR_CONTROL	0x08
-#define OMAP850_GPIO_INT_CONTROL	0x0c
-#define OMAP850_GPIO_INT_MASK		0x10
-#define OMAP850_GPIO_INT_STATUS		0x14
-
-#define OMAP1_MPUIO_VBASE		OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE)
+#define OMAP7XX_GPIO1_BASE		0xfffbc000
+#define OMAP7XX_GPIO2_BASE		0xfffbc800
+#define OMAP7XX_GPIO3_BASE		0xfffbd000
+#define OMAP7XX_GPIO4_BASE		0xfffbd800
+#define OMAP7XX_GPIO5_BASE		0xfffbe000
+#define OMAP7XX_GPIO6_BASE		0xfffbe800
+#define OMAP7XX_GPIO_DATA_INPUT		0x00
+#define OMAP7XX_GPIO_DATA_OUTPUT	0x04
+#define OMAP7XX_GPIO_DIR_CONTROL	0x08
+#define OMAP7XX_GPIO_INT_CONTROL	0x0c
+#define OMAP7XX_GPIO_INT_MASK		0x10
+#define OMAP7XX_GPIO_INT_STATUS		0x14
+
+#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 
 /*
  * omap24xx specific GPIO registers
  */
-#define OMAP242X_GPIO1_BASE		OMAP2_IO_ADDRESS(0x48018000)
-#define OMAP242X_GPIO2_BASE		OMAP2_IO_ADDRESS(0x4801a000)
-#define OMAP242X_GPIO3_BASE		OMAP2_IO_ADDRESS(0x4801c000)
-#define OMAP242X_GPIO4_BASE		OMAP2_IO_ADDRESS(0x4801e000)
+#define OMAP242X_GPIO1_BASE		0x48018000
+#define OMAP242X_GPIO2_BASE		0x4801a000
+#define OMAP242X_GPIO3_BASE		0x4801c000
+#define OMAP242X_GPIO4_BASE		0x4801e000
 
-#define OMAP243X_GPIO1_BASE		OMAP2_IO_ADDRESS(0x4900C000)
-#define OMAP243X_GPIO2_BASE		OMAP2_IO_ADDRESS(0x4900E000)
-#define OMAP243X_GPIO3_BASE		OMAP2_IO_ADDRESS(0x49010000)
-#define OMAP243X_GPIO4_BASE		OMAP2_IO_ADDRESS(0x49012000)
-#define OMAP243X_GPIO5_BASE		OMAP2_IO_ADDRESS(0x480B6000)
+#define OMAP243X_GPIO1_BASE		0x4900C000
+#define OMAP243X_GPIO2_BASE		0x4900E000
+#define OMAP243X_GPIO3_BASE		0x49010000
+#define OMAP243X_GPIO4_BASE		0x49012000
+#define OMAP243X_GPIO5_BASE		0x480B6000
 
 #define OMAP24XX_GPIO_REVISION		0x0000
 #define OMAP24XX_GPIO_SYSCONFIG		0x0010
@@ -170,24 +154,25 @@
  * omap34xx specific GPIO registers
  */
 
-#define OMAP34XX_GPIO1_BASE		OMAP2_IO_ADDRESS(0x48310000)
-#define OMAP34XX_GPIO2_BASE		OMAP2_IO_ADDRESS(0x49050000)
-#define OMAP34XX_GPIO3_BASE		OMAP2_IO_ADDRESS(0x49052000)
-#define OMAP34XX_GPIO4_BASE		OMAP2_IO_ADDRESS(0x49054000)
-#define OMAP34XX_GPIO5_BASE		OMAP2_IO_ADDRESS(0x49056000)
-#define OMAP34XX_GPIO6_BASE		OMAP2_IO_ADDRESS(0x49058000)
+#define OMAP34XX_GPIO1_BASE		0x48310000
+#define OMAP34XX_GPIO2_BASE		0x49050000
+#define OMAP34XX_GPIO3_BASE		0x49052000
+#define OMAP34XX_GPIO4_BASE		0x49054000
+#define OMAP34XX_GPIO5_BASE		0x49056000
+#define OMAP34XX_GPIO6_BASE		0x49058000
 
 /*
  * OMAP44XX  specific GPIO registers
  */
-#define OMAP44XX_GPIO1_BASE             OMAP2_IO_ADDRESS(0x4a310000)
-#define OMAP44XX_GPIO2_BASE             OMAP2_IO_ADDRESS(0x48055000)
-#define OMAP44XX_GPIO3_BASE             OMAP2_IO_ADDRESS(0x48057000)
-#define OMAP44XX_GPIO4_BASE             OMAP2_IO_ADDRESS(0x48059000)
-#define OMAP44XX_GPIO5_BASE             OMAP2_IO_ADDRESS(0x4805B000)
-#define OMAP44XX_GPIO6_BASE             OMAP2_IO_ADDRESS(0x4805D000)
+#define OMAP44XX_GPIO1_BASE             0x4a310000
+#define OMAP44XX_GPIO2_BASE             0x48055000
+#define OMAP44XX_GPIO3_BASE             0x48057000
+#define OMAP44XX_GPIO4_BASE             0x48059000
+#define OMAP44XX_GPIO5_BASE             0x4805B000
+#define OMAP44XX_GPIO6_BASE             0x4805D000
 
 struct gpio_bank {
+	unsigned long pbase;
 	void __iomem *base;
 	u16 irq;
 	u16 virtual_irq_start;
@@ -210,101 +195,134 @@ struct gpio_bank {
 	spinlock_t lock;
 	struct gpio_chip chip;
 	struct clk *dbck;
+	u32 mod_usage;
 };
 
 #define METHOD_MPUIO		0
 #define METHOD_GPIO_1510	1
 #define METHOD_GPIO_1610	2
-#define METHOD_GPIO_730		3
-#define METHOD_GPIO_850		4
+#define METHOD_GPIO_7XX		3
 #define METHOD_GPIO_24XX	5
 
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
-	{ OMAP1_MPUIO_VBASE,    INT_MPUIO,	    IH_MPUIO_BASE,     METHOD_MPUIO},
-	{ OMAP1610_GPIO1_BASE, INT_GPIO_BANK1,	    IH_GPIO_BASE,      METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO4_BASE, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, METHOD_GPIO_1610 },
+	{ OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
+		METHOD_MPUIO },
+	{ OMAP1610_GPIO1_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_1610 },
+	{ OMAP1610_GPIO2_BASE, NULL, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16,
+		METHOD_GPIO_1610 },
+	{ OMAP1610_GPIO3_BASE, NULL, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32,
+		METHOD_GPIO_1610 },
+	{ OMAP1610_GPIO4_BASE, NULL, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48,
+		METHOD_GPIO_1610 },
 };
 #endif
 
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct gpio_bank gpio_bank_1510[2] = {
-	{ OMAP1_MPUIO_VBASE,   INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
-	{ OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE,  METHOD_GPIO_1510 }
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP730
-static struct gpio_bank gpio_bank_730[7] = {
-	{ OMAP1_MPUIO_VBASE,    INT_730_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
-	{ OMAP730_GPIO1_BASE,  INT_730_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO2_BASE,  INT_730_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO3_BASE,  INT_730_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO4_BASE,  INT_730_GPIO_BANK4,  IH_GPIO_BASE + 96,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO5_BASE,  INT_730_GPIO_BANK5,  IH_GPIO_BASE + 128, METHOD_GPIO_730 },
-	{ OMAP730_GPIO6_BASE,  INT_730_GPIO_BANK6,  IH_GPIO_BASE + 160, METHOD_GPIO_730 },
+	{ OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
+		METHOD_MPUIO },
+	{ OMAP1510_GPIO_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_1510 }
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP850
-static struct gpio_bank gpio_bank_850[7] = {
-	{ OMAP1_MPUIO_VBASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
-	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO4_BASE,  INT_850_GPIO_BANK4,  IH_GPIO_BASE + 96,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO5_BASE,  INT_850_GPIO_BANK5,  IH_GPIO_BASE + 128, METHOD_GPIO_850 },
-	{ OMAP850_GPIO6_BASE,  INT_850_GPIO_BANK6,  IH_GPIO_BASE + 160, METHOD_GPIO_850 },
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+static struct gpio_bank gpio_bank_7xx[7] = {
+	{ OMAP1_MPUIO_VBASE, NULL, INT_7XX_MPUIO, IH_MPUIO_BASE,
+		METHOD_MPUIO },
+	{ OMAP7XX_GPIO1_BASE, NULL, INT_7XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO2_BASE, NULL, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO3_BASE, NULL, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO4_BASE, NULL, INT_7XX_GPIO_BANK4,  IH_GPIO_BASE + 96,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO5_BASE, NULL, INT_7XX_GPIO_BANK5,  IH_GPIO_BASE + 128,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO6_BASE, NULL, INT_7XX_GPIO_BANK6,  IH_GPIO_BASE + 160,
+		METHOD_GPIO_7XX },
 };
 #endif
 
-
 #ifdef CONFIG_ARCH_OMAP24XX
 
 static struct gpio_bank gpio_bank_242x[4] = {
-	{ OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,	METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,	METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,	METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,	METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+		METHOD_GPIO_24XX },
 };
 
 static struct gpio_bank gpio_bank_243x[5] = {
-	{ OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO5_BASE, NULL, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128,
+		METHOD_GPIO_24XX },
 };
 
 #endif
 
 #ifdef CONFIG_ARCH_OMAP34XX
 static struct gpio_bank gpio_bank_34xx[6] = {
-	{ OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO2_BASE, NULL, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO3_BASE, NULL, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO4_BASE, NULL, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO5_BASE, NULL, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO6_BASE, NULL, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160,
+		METHOD_GPIO_24XX },
 };
 
+struct omap3_gpio_regs {
+	u32 sysconfig;
+	u32 irqenable1;
+	u32 irqenable2;
+	u32 wake_en;
+	u32 ctrl;
+	u32 oe;
+	u32 leveldetect0;
+	u32 leveldetect1;
+	u32 risingdetect;
+	u32 fallingdetect;
+	u32 dataout;
+	u32 setwkuena;
+	u32 setdataout;
+};
+
+static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
 static struct gpio_bank gpio_bank_44xx[6] = {
-	{ OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,	\
+	{ OMAP44XX_GPIO1_BASE, NULL, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,	\
+	{ OMAP44XX_GPIO2_BASE, NULL, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,	\
+	{ OMAP44XX_GPIO3_BASE, NULL, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,	\
+	{ OMAP44XX_GPIO4_BASE, NULL, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
+	{ OMAP44XX_GPIO5_BASE, NULL, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
+	{ OMAP44XX_GPIO6_BASE, NULL, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160,
 		METHOD_GPIO_24XX },
 };
 
@@ -402,14 +420,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP1610_GPIO_DIRECTION;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DIR_CONTROL;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DIR_CONTROL;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DIR_CONTROL;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -469,19 +482,9 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 		l = 1 << gpio;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DATA_OUTPUT;
-		l = __raw_readl(reg);
-		if (enable)
-			l |= 1 << gpio;
-		else
-			l &= ~(1 << gpio);
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DATA_OUTPUT;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_OUTPUT;
 		l = __raw_readl(reg);
 		if (enable)
 			l |= 1 << gpio;
@@ -537,14 +540,9 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 		reg += OMAP1610_GPIO_DATAIN;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DATA_INPUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DATA_INPUT;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_INPUT;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -588,14 +586,9 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
 		reg += OMAP1610_GPIO_DATAOUT;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DATA_OUTPUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DATA_OUTPUT;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_OUTPUT;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
@@ -636,6 +629,10 @@ void omap_set_gpio_debounce(int gpio, int enable)
 #else
 	reg += OMAP24XX_GPIO_DEBOUNCE_EN;
 #endif
+	if (!(bank->mod_usage & l)) {
+		printk(KERN_ERR "GPIO %d not requested\n", gpio);
+		return;
+	}
 
 	spin_lock_irqsave(&bank->lock, flags);
 	val = __raw_readl(reg);
@@ -671,6 +668,11 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
 	bank = get_gpio_bank(gpio);
 	reg = bank->base;
 
+	if (!bank->mod_usage) {
+		printk(KERN_ERR "GPIO not requested\n");
+		return;
+	}
+
 	enc_time &= 0xff;
 #ifdef CONFIG_ARCH_OMAP4
 	reg += OMAP4_GPIO_DEBOUNCINGTIME;
@@ -797,21 +799,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 			__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_CONTROL;
-		l = __raw_readl(reg);
-		if (trigger & IRQ_TYPE_EDGE_RISING)
-			l |= 1 << gpio;
-		else if (trigger & IRQ_TYPE_EDGE_FALLING)
-			l &= ~(1 << gpio);
-		else
-			goto bad;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_CONTROL;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
@@ -897,14 +887,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP1610_GPIO_IRQSTATUS1;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_STATUS;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_STATUS;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_STATUS;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -971,16 +956,9 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		mask = 0xffff;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_MASK;
-		mask = 0xffffffff;
-		inv = 1;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_MASK;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_MASK;
 		mask = 0xffffffff;
 		inv = 1;
 		break;
@@ -1044,19 +1022,9 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 		l = gpio_mask;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_MASK;
-		l = __raw_readl(reg);
-		if (enable)
-			l &= ~(gpio_mask);
-		else
-			l |= gpio_mask;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_MASK;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_MASK;
 		l = __raw_readl(reg);
 		if (enable)
 			l &= ~(gpio_mask);
@@ -1186,6 +1154,16 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(__raw_readl(reg) | (1 << offset), reg);
 	}
 #endif
+	if (!cpu_class_is_omap1()) {
+		if (!bank->mod_usage) {
+			u32 ctrl;
+			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+			ctrl &= 0xFFFFFFFE;
+			/* Module is enabled, clocks are not gated */
+			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+		}
+		bank->mod_usage |= 1 << offset;
+	}
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
@@ -1212,6 +1190,16 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(1 << offset, reg);
 	}
 #endif
+	if (!cpu_class_is_omap1()) {
+		bank->mod_usage &= ~(1 << offset);
+		if (!bank->mod_usage) {
+			u32 ctrl;
+			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+			/* Module is disabled, clocks are gated */
+			ctrl |= 1;
+			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+		}
+	}
 	_reset_gpio(bank, bank->chip.base + offset);
 	spin_unlock_irqrestore(&bank->lock, flags);
 }
@@ -1249,13 +1237,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_1610)
 		isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	if (bank->method == METHOD_GPIO_730)
-		isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	if (bank->method == METHOD_GPIO_850)
-		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	if (bank->method == METHOD_GPIO_7XX)
+		isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	if (bank->method == METHOD_GPIO_24XX)
@@ -1447,7 +1431,7 @@ static int omap_mpuio_resume_noirq(struct device *dev)
 	return 0;
 }
 
-static struct dev_pm_ops omap_mpuio_dev_pm_ops = {
+static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
 	.suspend_noirq = omap_mpuio_suspend_noirq,
 	.resume_noirq = omap_mpuio_resume_noirq,
 };
@@ -1524,11 +1508,8 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
 	case METHOD_GPIO_1610:
 		reg += OMAP1610_GPIO_DIRECTION;
 		break;
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DIR_CONTROL;
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DIR_CONTROL;
 		break;
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
@@ -1607,6 +1588,23 @@ static struct clk * gpio5_fck;
 static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
 #endif
 
+static void __init omap_gpio_show_rev(void)
+{
+	u32 rev;
+
+	if (cpu_is_omap16xx())
+		rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
+	else if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+	else if (cpu_is_omap44xx())
+		rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
+	else
+		return;
+
+	printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
+		(rev >> 4) & 0x0f, rev & 0x0f);
+}
+
 /* This lock class tells lockdep that GPIO irqs are in a different
  * category than their parents, so it won't report false recursion.
  */
@@ -1617,6 +1615,7 @@ static int __init _omap_gpio_init(void)
 	int i;
 	int gpio = 0;
 	struct gpio_bank *bank;
+	int bank_size = SZ_8K;	/* Module 4KB + L4 4KB except on omap1 */
 	char clk_name[11];
 
 	initialized = 1;
@@ -1679,77 +1678,45 @@ static int __init _omap_gpio_init(void)
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
-		printk(KERN_INFO "OMAP1510 GPIO hardware\n");
 		gpio_bank_count = 2;
 		gpio_bank = gpio_bank_1510;
+		bank_size = SZ_2K;
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (cpu_is_omap16xx()) {
-		u32 rev;
-
 		gpio_bank_count = 5;
 		gpio_bank = gpio_bank_1610;
-		rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
-		printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
-		       (rev >> 4) & 0x0f, rev & 0x0f);
+		bank_size = SZ_2K;
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	if (cpu_is_omap730()) {
-		printk(KERN_INFO "OMAP730 GPIO hardware\n");
-		gpio_bank_count = 7;
-		gpio_bank = gpio_bank_730;
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	if (cpu_is_omap850()) {
-		printk(KERN_INFO "OMAP850 GPIO hardware\n");
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	if (cpu_is_omap7xx()) {
 		gpio_bank_count = 7;
-		gpio_bank = gpio_bank_850;
+		gpio_bank = gpio_bank_7xx;
+		bank_size = SZ_2K;
 	}
 #endif
-
 #ifdef CONFIG_ARCH_OMAP24XX
 	if (cpu_is_omap242x()) {
-		int rev;
-
 		gpio_bank_count = 4;
 		gpio_bank = gpio_bank_242x;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
-		printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 	if (cpu_is_omap243x()) {
-		int rev;
-
 		gpio_bank_count = 5;
 		gpio_bank = gpio_bank_243x;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
-		printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP34XX
 	if (cpu_is_omap34xx()) {
-		int rev;
-
 		gpio_bank_count = OMAP34XX_NR_GPIOS;
 		gpio_bank = gpio_bank_34xx;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
-		printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP4
 	if (cpu_is_omap44xx()) {
-		int rev;
-
 		gpio_bank_count = OMAP34XX_NR_GPIOS;
 		gpio_bank = gpio_bank_44xx;
-		rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
-		printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
 	for (i = 0; i < gpio_bank_count; i++) {
@@ -1757,6 +1724,14 @@ static int __init _omap_gpio_init(void)
 
 		bank = &gpio_bank[i];
 		spin_lock_init(&bank->lock);
+
+		/* Static mapping, never released */
+		bank->base = ioremap(bank->pbase, bank_size);
+		if (!bank->base) {
+			printk(KERN_ERR "Could not ioremap gpio bank%i\n", i);
+			continue;
+		}
+
 		if (bank_is_mpuio(bank))
 			__raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT);
 		if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
@@ -1768,11 +1743,11 @@ static int __init _omap_gpio_init(void)
 			__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
 			__raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
 		}
-		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) {
-			__raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
-			__raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
+		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
+			__raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK);
+			__raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS);
 
-			gpio_count = 32; /* 730 has 32-bit GPIOs */
+			gpio_count = 32; /* 7xx has 32-bit GPIOs */
 		}
 
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
@@ -1804,6 +1779,8 @@ static int __init _omap_gpio_init(void)
 			gpio_count = 32;
 		}
 #endif
+
+		bank->mod_usage = 0;
 		/* REVISIT eventually switch from OMAP-specific gpio structs
 		 * over to the generic ones
 		 */
@@ -1862,6 +1839,8 @@ static int __init _omap_gpio_init(void)
 	if (cpu_is_omap34xx())
 		omap_writel(1 << 0, 0x48306814);
 
+	omap_gpio_show_rev();
+
 	return 0;
 }
 
@@ -2106,6 +2085,81 @@ void omap2_gpio_resume_after_retention(void)
 
 #endif
 
+#ifdef CONFIG_ARCH_OMAP34XX
+/* save the registers of bank 2-6 */
+void omap_gpio_save_context(void)
+{
+	int i;
+
+	/* saving banks from 2-6 only since GPIO1 is in WKUP */
+	for (i = 1; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		gpio_context[i].sysconfig =
+			__raw_readl(bank->base + OMAP24XX_GPIO_SYSCONFIG);
+		gpio_context[i].irqenable1 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
+		gpio_context[i].irqenable2 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
+		gpio_context[i].wake_en =
+			__raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
+		gpio_context[i].ctrl =
+			__raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+		gpio_context[i].oe =
+			__raw_readl(bank->base + OMAP24XX_GPIO_OE);
+		gpio_context[i].leveldetect0 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+		gpio_context[i].leveldetect1 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+		gpio_context[i].risingdetect =
+			__raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		gpio_context[i].fallingdetect =
+			__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+		gpio_context[i].dataout =
+			__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
+		gpio_context[i].setwkuena =
+			__raw_readl(bank->base + OMAP24XX_GPIO_SETWKUENA);
+		gpio_context[i].setdataout =
+			__raw_readl(bank->base + OMAP24XX_GPIO_SETDATAOUT);
+	}
+}
+
+/* restore the required registers of bank 2-6 */
+void omap_gpio_restore_context(void)
+{
+	int i;
+
+	for (i = 1; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		__raw_writel(gpio_context[i].sysconfig,
+				bank->base + OMAP24XX_GPIO_SYSCONFIG);
+		__raw_writel(gpio_context[i].irqenable1,
+				bank->base + OMAP24XX_GPIO_IRQENABLE1);
+		__raw_writel(gpio_context[i].irqenable2,
+				bank->base + OMAP24XX_GPIO_IRQENABLE2);
+		__raw_writel(gpio_context[i].wake_en,
+				bank->base + OMAP24XX_GPIO_WAKE_EN);
+		__raw_writel(gpio_context[i].ctrl,
+				bank->base + OMAP24XX_GPIO_CTRL);
+		__raw_writel(gpio_context[i].oe,
+				bank->base + OMAP24XX_GPIO_OE);
+		__raw_writel(gpio_context[i].leveldetect0,
+				bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+		__raw_writel(gpio_context[i].leveldetect1,
+				bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+		__raw_writel(gpio_context[i].risingdetect,
+				bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		__raw_writel(gpio_context[i].fallingdetect,
+				bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+		__raw_writel(gpio_context[i].dataout,
+				bank->base + OMAP24XX_GPIO_DATAOUT);
+		__raw_writel(gpio_context[i].setwkuena,
+				bank->base + OMAP24XX_GPIO_SETWKUENA);
+		__raw_writel(gpio_context[i].setdataout,
+				bank->base + OMAP24XX_GPIO_SETDATAOUT);
+	}
+}
+#endif
+
 /*
  * This may get called early from board specific init
  * for boards that have interrupts routed via FPGA.
@@ -2160,8 +2214,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
 		if (bank_is_mpuio(bank))
 			gpio = OMAP_MPUIO(0);
-		else if (cpu_class_is_omap2() || cpu_is_omap730() ||
-				cpu_is_omap850())
+		else if (cpu_class_is_omap2() || cpu_is_omap7xx())
 			bankwidth = 32;
 
 		for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 8b84839..33fff4e 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -27,7 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <mach/irqs.h>
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
@@ -80,47 +80,8 @@ static struct platform_device omap_i2c_devices[] = {
 #endif
 };
 
-#if defined(CONFIG_ARCH_OMAP24XX)
-static const int omap24xx_pins[][2] = {
-	{ M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA },
-	{ J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA },
-};
-#else
-static const int omap24xx_pins[][2] = {};
-#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
-static const int omap34xx_pins[][2] = {
-	{ K21_34XX_I2C1_SCL, J21_34XX_I2C1_SDA},
-	{ AF15_34XX_I2C2_SCL, AE15_34XX_I2C2_SDA},
-	{ AF14_34XX_I2C3_SCL, AG14_34XX_I2C3_SDA},
-};
-#else
-static const int omap34xx_pins[][2] = {};
-#endif
-
 #define OMAP_I2C_CMDLINE_SETUP	(BIT(31))
 
-static void __init omap_i2c_mux_pins(int bus)
-{
-	int scl, sda;
-
-	if (cpu_class_is_omap1()) {
-		scl = I2C_SCL;
-		sda = I2C_SDA;
-	} else if (cpu_is_omap24xx()) {
-		scl = omap24xx_pins[bus][0];
-		sda = omap24xx_pins[bus][1];
-	} else if (cpu_is_omap34xx()) {
-		scl = omap34xx_pins[bus][0];
-		sda = omap34xx_pins[bus][1];
-	} else {
-		return;
-	}
-
-	omap_cfg_reg(sda);
-	omap_cfg_reg(scl);
-}
-
 static int __init omap_i2c_nr_ports(void)
 {
 	int ports = 0;
@@ -156,7 +117,6 @@ static int __init omap_i2c_add_bus(int bus_id)
 		res[1].start = irq;
 	}
 
-	omap_i2c_mux_pins(bus_id - 1);
 	return platform_device_register(pdev);
 }
 
@@ -209,7 +169,7 @@ out:
 subsys_initcall(omap_register_i2c_bus_cmdline);
 
 /**
- * omap_register_i2c_bus - register I2C bus with device descriptors
+ * omap_plat_register_i2c_bus - register I2C bus with device descriptors
  * @bus_id: bus id counting from number 1
  * @clkrate: clock rate of the bus in kHz
  * @info: pointer into I2C device descriptor table or NULL
@@ -217,7 +177,7 @@ subsys_initcall(omap_register_i2c_bus_cmdline);
  *
  * Returns 0 on success or an error code.
  */
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
 			  struct i2c_board_info const *info,
 			  unsigned len)
 {
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
deleted file mode 100644
index ac24050..0000000
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ /dev/null
@@ -1,70 +0,0 @@
-/* arch/arm/plat-omap/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-#ifdef CONFIG_ARCH_OMAP1
-		moveq	\rx, #0xff000000	@ physical base address
-		movne	\rx, #0xfe000000	@ virtual base
-		orr	\rx, \rx, #0x00fb0000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		orr	\rx, \rx, #0x00009000	@ UART 3
-#endif
-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
-		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
-#endif
-
-#elif  CONFIG_ARCH_OMAP2
-		moveq	\rx, #0x48000000	@ physical base address
-		movne	\rx, #0xd8000000	@ virtual base
-		orr	\rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
-		add	\rx, \rx, #0x00002000	@ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		add	\rx, \rx, #0x00004000	@ UART 3
-#endif
-
-#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-		moveq	\rx, #0x48000000	@ physical base address
-		movne	\rx, #0xd8000000	@ virtual base
-		orr	\rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
-		add	\rx, \rx, #0x00002000	@ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		add	\rx, \rx, #0x00fb0000	@ UART 3
-		add	\rx, \rx, #0x00006000
-#endif
-#endif
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
-		beq	1002f
-		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
-		bne	1001b
-1002:
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
deleted file mode 100644
index a559299..0000000
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for OMAP-based platforms
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <mach/irqs.h>
-#include <asm/hardware/gic.h>
-
-#if defined(CONFIG_ARCH_OMAP1)
-
-#if defined(CONFIG_ARCH_OMAP730) && \
-	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
-#error "FIXME: OMAP730 doesn't support multiple-OMAP"
-#elif defined(CONFIG_ARCH_OMAP730)
-#define INT_IH2_IRQ		INT_730_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP15XX)
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP16XX)
-#define INT_IH2_IRQ		INT_1610_IH2_IRQ
-#else
-#warning "IH2 IRQ defaulted"
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#endif
-
- 		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
-		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
-		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
-		mov	\irqstat, #0xffffffff
-		bic	\tmp, \irqstat, \tmp
-		tst	\irqnr, \tmp
-		beq	1510f
-
-		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
-		cmp	\irqnr, #0
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		cmpeq	\irqnr, #INT_IH2_IRQ
-		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		addeqs	\irqnr, \irqnr, #32
-1510:
-		.endm
-
-#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
-
-#include <mach/omap24xx.h>
-#include <mach/omap34xx.h>
-
-/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
-#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
-#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE)
-#elif defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE)
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-#include <mach/omap44xx.h>
-#endif
-#define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt offset */
-#define	ACTIVEIRQ_MASK		0x7f		/* Active interrupt bits */
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-#ifndef CONFIG_ARCH_OMAP4
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =OMAP2_VA_IC_BASE
-		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-		cmp	\irqnr, #0x0
-		bne	2222f
-		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-		cmp	\irqnr, #0x0
-		bne	2222f
-		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-		cmp	\irqnr, #0x0
-2222:
-		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
-		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-
-		.endm
-#else
-		/*
-		 * The interrupt numbering scheme is defined in the
-		 * interrupt controller spec.  To wit:
-		 *
-		 * Interrupts 0-15 are IPI
-		 * 16-28 are reserved
-		 * 29-31 are local.  We allow 30 to be used for the watchdog.
-		 * 32-1020 are global
-		 * 1021-1022 are reserved
-		 * 1023 is "spurious" (no interrupt)
-		 *
-		 * For now, we ignore all local interrupts so only return an
-		 * interrupt if it's between 30 and 1020.  The test_for_ipi
-		 * routine below will pick up on IPIs.
-		 * A simple read from the controller will tell us the number
-		 * of the highest priority enabled interrupt.
-		 * We then just need to check whether it is in the
-		 * valid range for an IRQ (30-1020 inclusive).
-		 */
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr     \base, =OMAP44XX_VA_GIC_CPU_BASE
-		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-
-		ldr     \tmp, =1021
-
-		bic     \irqnr, \irqstat, #0x1c00
-
-		cmp     \irqnr, #29
-		cmpcc   \irqnr, \irqnr
-		cmpne   \irqnr, \tmp
-		cmpcs   \irqnr, \irqnr
-		.endm
-
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt
-		 * on the controller, since this requires the original irqstat
-		 * value which we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		it	cc
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		it	cs
-		cmpcs	\irqnr, \irqnr
-		.endm
-
-		/* As above, this assumes that irqstat and base are preserved */
-
-		.macro test_for_ltirq, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		mov 	\tmp, #0
-		cmp	\irqnr, #29
-		itt	eq
-		moveq	\tmp, #1
-		streq	\irqstat, [\base, #GIC_CPU_EOI]
-		cmp	\tmp, #0
-		.endm
-#endif
-
-		.macro	irq_prio_table
-		.endm
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h
deleted file mode 100644
index f82a8dc..0000000
--- a/arch/arm/plat-omap/include/mach/mtd-xip.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions.
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- *
- * Author: Vladimir Barinov <vbarinov@embeddedalley.com>
- *
- * (c) 2005 MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is
- * licensed "as is" without any warranty of any kind, whether express or
- * implied.
- */
-
-#ifndef __ARCH_OMAP_MTD_XIP_H__
-#define __ARCH_OMAP_MTD_XIP_H__
-
-#include <mach/hardware.h>
-#define OMAP_MPU_TIMER_BASE	(0xfffec500)
-#define OMAP_MPU_TIMER_OFFSET	0x100
-
-typedef struct {
-	u32 cntl;			/* CNTL_TIMER, R/W */
-	u32 load_tim;			/* LOAD_TIM,   W */
-	u32 read_tim;			/* READ_TIM,   R */
-} xip_omap_mpu_timer_regs_t;
-
-#define xip_omap_mpu_timer_base(n)					\
-((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
-	(n)*OMAP_MPU_TIMER_OFFSET))
-
-static inline unsigned long xip_omap_mpu_timer_read(int nr)
-{
-	volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
-	return timer->read_tim;
-}
-
-#define xip_irqpending()	\
-	(omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
-#define xip_currtime()		(~xip_omap_mpu_timer_read(0))
-
-/*
- * It's permitted to do approxmation for xip_elapsed_since macro
- * (see linux/mtd/xip.h)
- */
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
-#else
-#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
-#endif
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period.  This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
- */
-
-#define xip_cpu_idle()  asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
-
-#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
deleted file mode 100644
index b226bdf..0000000
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * File: arch/arm/plat-omap/include/mach/omapfb.h
- *
- * Framebuffer driver for TI OMAP boards
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __OMAPFB_H
-#define __OMAPFB_H
-
-#include <asm/ioctl.h>
-#include <asm/types.h>
-
-/* IOCTL commands. */
-
-#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
-#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
-#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
-#define OMAP_IO(num)		_IO('O', num)
-
-#define OMAPFB_MIRROR		OMAP_IOW(31, int)
-#define OMAPFB_SYNC_GFX		OMAP_IO(37)
-#define OMAPFB_VSYNC		OMAP_IO(38)
-#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
-#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
-#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
-#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
-#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
-#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
-#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
-#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
-#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
-#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
-#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
-#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
-
-#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
-#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
-#define OMAPFB_CAPS_PANEL_MASK		0xff000000
-
-#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
-#define OMAPFB_CAPS_TEARSYNC		0x00002000
-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
-#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
-#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
-#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
-#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
-#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
-
-/* Values from DSP must map to lower 16-bits */
-#define OMAPFB_FORMAT_MASK		0x00ff
-#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
-#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
-
-#define OMAPFB_EVENT_READY	1
-#define OMAPFB_EVENT_DISABLED	2
-
-#define OMAPFB_MEMTYPE_SDRAM		0
-#define OMAPFB_MEMTYPE_SRAM		1
-#define OMAPFB_MEMTYPE_MAX		1
-
-enum omapfb_color_format {
-	OMAPFB_COLOR_RGB565 = 0,
-	OMAPFB_COLOR_YUV422,
-	OMAPFB_COLOR_YUV420,
-	OMAPFB_COLOR_CLUT_8BPP,
-	OMAPFB_COLOR_CLUT_4BPP,
-	OMAPFB_COLOR_CLUT_2BPP,
-	OMAPFB_COLOR_CLUT_1BPP,
-	OMAPFB_COLOR_RGB444,
-	OMAPFB_COLOR_YUY422,
-};
-
-struct omapfb_update_window {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-	__u32 out_x, out_y;
-	__u32 out_width, out_height;
-	__u32 reserved[8];
-};
-
-struct omapfb_update_window_old {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-};
-
-enum omapfb_plane {
-	OMAPFB_PLANE_GFX = 0,
-	OMAPFB_PLANE_VID1,
-	OMAPFB_PLANE_VID2,
-};
-
-enum omapfb_channel_out {
-	OMAPFB_CHANNEL_OUT_LCD = 0,
-	OMAPFB_CHANNEL_OUT_DIGIT,
-};
-
-struct omapfb_plane_info {
-	__u32 pos_x;
-	__u32 pos_y;
-	__u8  enabled;
-	__u8  channel_out;
-	__u8  mirror;
-	__u8  reserved1;
-	__u32 out_width;
-	__u32 out_height;
-	__u32 reserved2[12];
-};
-
-struct omapfb_mem_info {
-	__u32 size;
-	__u8  type;
-	__u8  reserved[3];
-};
-
-struct omapfb_caps {
-	__u32 ctrl;
-	__u32 plane_color;
-	__u32 wnd_color;
-};
-
-enum omapfb_color_key_type {
-	OMAPFB_COLOR_KEY_DISABLED = 0,
-	OMAPFB_COLOR_KEY_GFX_DST,
-	OMAPFB_COLOR_KEY_VID_SRC,
-};
-
-struct omapfb_color_key {
-	__u8  channel_out;
-	__u32 background;
-	__u32 trans_key;
-	__u8  key_type;
-};
-
-enum omapfb_update_mode {
-	OMAPFB_UPDATE_DISABLED = 0,
-	OMAPFB_AUTO_UPDATE,
-	OMAPFB_MANUAL_UPDATE
-};
-
-#ifdef __KERNEL__
-
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/mutex.h>
-
-#include <mach/board.h>
-
-#define OMAP_LCDC_INV_VSYNC             0x0001
-#define OMAP_LCDC_INV_HSYNC             0x0002
-#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
-#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
-#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
-#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
-
-#define OMAP_LCDC_SIGNAL_MASK		0x003f
-
-#define OMAP_LCDC_PANEL_TFT		0x0100
-
-#define OMAPFB_PLANE_XRES_MIN		8
-#define OMAPFB_PLANE_YRES_MIN		8
-
-#ifdef CONFIG_ARCH_OMAP1
-#define OMAPFB_PLANE_NUM		1
-#else
-#define OMAPFB_PLANE_NUM		3
-#endif
-
-struct omapfb_device;
-
-struct lcd_panel {
-	const char	*name;
-	int		config;		/* TFT/STN, signal inversion */
-	int		bpp;		/* Pixel format in fb mem */
-	int		data_lines;	/* Lines on LCD HW interface */
-
-	int		x_res, y_res;
-	int		pixel_clock;	/* In kHz */
-	int		hsw;		/* Horizontal synchronization
-					   pulse width */
-	int		hfp;		/* Horizontal front porch */
-	int		hbp;		/* Horizontal back porch */
-	int		vsw;		/* Vertical synchronization
-					   pulse width */
-	int		vfp;		/* Vertical front porch */
-	int		vbp;		/* Vertical back porch */
-	int		acb;		/* ac-bias pin frequency */
-	int		pcd;		/* pixel clock divider.
-					   Obsolete use pixel_clock instead */
-
-	int		(*init)		(struct lcd_panel *panel,
-					 struct omapfb_device *fbdev);
-	void		(*cleanup)	(struct lcd_panel *panel);
-	int		(*enable)	(struct lcd_panel *panel);
-	void		(*disable)	(struct lcd_panel *panel);
-	unsigned long	(*get_caps)	(struct lcd_panel *panel);
-	int		(*set_bklight_level)(struct lcd_panel *panel,
-					     unsigned int level);
-	unsigned int	(*get_bklight_level)(struct lcd_panel *panel);
-	unsigned int	(*get_bklight_max)  (struct lcd_panel *panel);
-	int		(*run_test)	(struct lcd_panel *panel, int test_num);
-};
-
-struct extif_timings {
-	int cs_on_time;
-	int cs_off_time;
-	int we_on_time;
-	int we_off_time;
-	int re_on_time;
-	int re_off_time;
-	int we_cycle_time;
-	int re_cycle_time;
-	int cs_pulse_width;
-	int access_time;
-
-	int clk_div;
-
-	u32 tim[5];		/* set by extif->convert_timings */
-
-	int converted;
-};
-
-struct lcd_ctrl_extif {
-	int  (*init)		(struct omapfb_device *fbdev);
-	void (*cleanup)		(void);
-	void (*get_clk_info)	(u32 *clk_period, u32 *max_clk_div);
-	unsigned long (*get_max_tx_rate)(void);
-	int  (*convert_timings)	(struct extif_timings *timings);
-	void (*set_timings)	(const struct extif_timings *timings);
-	void (*set_bits_per_cycle)(int bpc);
-	void (*write_command)	(const void *buf, unsigned int len);
-	void (*read_data)	(void *buf, unsigned int len);
-	void (*write_data)	(const void *buf, unsigned int len);
-	void (*transfer_area)	(int width, int height,
-				 void (callback)(void * data), void *data);
-	int  (*setup_tearsync)	(unsigned pin_cnt,
-				 unsigned hs_pulse_time, unsigned vs_pulse_time,
-				 int hs_pol_inv, int vs_pol_inv, int div);
-	int  (*enable_tearsync) (int enable, unsigned line);
-
-	unsigned long		max_transmit_size;
-};
-
-struct omapfb_notifier_block {
-	struct notifier_block	nb;
-	void			*data;
-	int			plane_idx;
-};
-
-typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
-					  unsigned long event,
-					  void *fbi);
-
-struct omapfb_mem_region {
-	u32		paddr;
-	void __iomem	*vaddr;
-	unsigned long	size;
-	u8		type;		/* OMAPFB_PLANE_MEM_* */
-	unsigned	alloc:1;	/* allocated by the driver */
-	unsigned	map:1;		/* kernel mapped by the driver */
-};
-
-struct omapfb_mem_desc {
-	int				region_cnt;
-	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
-};
-
-struct lcd_ctrl {
-	const char	*name;
-	void		*data;
-
-	int		(*init)		  (struct omapfb_device *fbdev,
-					   int ext_mode,
-					   struct omapfb_mem_desc *req_md);
-	void		(*cleanup)	  (void);
-	void		(*bind_client)	  (struct omapfb_notifier_block *nb);
-	void		(*get_caps)	  (int plane, struct omapfb_caps *caps);
-	int		(*set_update_mode)(enum omapfb_update_mode mode);
-	enum omapfb_update_mode (*get_update_mode)(void);
-	int		(*setup_plane)	  (int plane, int channel_out,
-					   unsigned long offset,
-					   int screen_width,
-					   int pos_x, int pos_y, int width,
-					   int height, int color_mode);
-	int		(*set_rotate)	  (int angle);
-	int		(*setup_mem)	  (int plane, size_t size,
-					   int mem_type, unsigned long *paddr);
-	int		(*mmap)		  (struct fb_info *info,
-					   struct vm_area_struct *vma);
-	int		(*set_scale)	  (int plane,
-					   int orig_width, int orig_height,
-					   int out_width, int out_height);
-	int		(*enable_plane)	  (int plane, int enable);
-	int		(*update_window)  (struct fb_info *fbi,
-					   struct omapfb_update_window *win,
-					   void (*callback)(void *),
-					   void *callback_data);
-	void		(*sync)		  (void);
-	void		(*suspend)	  (void);
-	void		(*resume)	  (void);
-	int		(*run_test)	  (int test_num);
-	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
-					   u16 blue, u16 transp,
-					   int update_hw_mem);
-	int		(*set_color_key)  (struct omapfb_color_key *ck);
-	int		(*get_color_key)  (struct omapfb_color_key *ck);
-};
-
-enum omapfb_state {
-	OMAPFB_DISABLED	= 0,
-	OMAPFB_SUSPENDED= 99,
-	OMAPFB_ACTIVE	= 100
-};
-
-struct omapfb_plane_struct {
-	int				idx;
-	struct omapfb_plane_info	info;
-	enum omapfb_color_format	color_mode;
-	struct omapfb_device		*fbdev;
-};
-
-struct omapfb_device {
-	int			state;
-	int                     ext_lcdc;               /* Using external
-                                                           LCD controller */
-	struct mutex		rqueue_mutex;
-
-	int			palette_size;
-	u32			pseudo_palette[17];
-
-	struct lcd_panel	*panel;			/* LCD panel */
-	const struct lcd_ctrl	*ctrl;			/* LCD controller */
-	const struct lcd_ctrl	*int_ctrl;		/* internal LCD ctrl */
-	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
-							   interface */
-	struct device		*dev;
-	struct fb_var_screeninfo	new_var;	/* for mode changes */
-
-	struct omapfb_mem_desc		mem_desc;
-	struct fb_info			*fb_info[OMAPFB_PLANE_NUM];
-};
-
-struct omapfb_platform_data {
-	struct omap_lcd_config		lcd;
-	struct omapfb_mem_desc		mem_desc;
-	void				*ctrl_platform_data;
-};
-
-#ifdef CONFIG_ARCH_OMAP1
-extern struct lcd_ctrl omap1_lcd_ctrl;
-#else
-extern struct lcd_ctrl omap2_disp_ctrl;
-#endif
-
-extern void omapfb_reserve_sdram(void);
-extern void omapfb_register_panel(struct lcd_panel *panel);
-extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
-extern void omapfb_notify_clients(struct omapfb_device *fbdev,
-				  unsigned long event);
-extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
-				   omapfb_notifier_callback_t callback,
-				   void *callback_data);
-extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
-extern int  omapfb_update_window_async(struct fb_info *fbi,
-				       struct omapfb_update_window *win,
-				       void (*callback)(void *),
-				       void *callback_data);
-
-/* in arch/arm/plat-omap/fb.c */
-extern void omapfb_set_ctrl_platform_data(void *pdata);
-
-#endif /* __KERNEL__ */
-
-#endif /* __OMAPFB_H */
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
deleted file mode 100644
index b97dfaf..0000000
--- a/arch/arm/plat-omap/include/mach/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END	  (PAGE_OFFSET + 0x18000000)
-
diff --git a/arch/arm/plat-omap/include/mach/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h
index 8d160f1..8d160f1 100644
--- a/arch/arm/plat-omap/include/mach/blizzard.h
+++ b/arch/arm/plat-omap/include/plat/blizzard.h
diff --git a/arch/arm/plat-omap/include/mach/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h
index 51b102d..51b102d 100644
--- a/arch/arm/plat-omap/include/mach/board-ams-delta.h
+++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h
diff --git a/arch/arm/plat-omap/include/mach/board-sx1.h b/arch/arm/plat-omap/include/plat/board-sx1.h
index 355adbd..355adbd 100644
--- a/arch/arm/plat-omap/include/mach/board-sx1.h
+++ b/arch/arm/plat-omap/include/plat/board-sx1.h
diff --git a/arch/arm/plat-omap/include/mach/board-voiceblue.h b/arch/arm/plat-omap/include/plat/board-voiceblue.h
index 27916b2..27916b2 100644
--- a/arch/arm/plat-omap/include/mach/board-voiceblue.h
+++ b/arch/arm/plat-omap/include/plat/board-voiceblue.h
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/plat/board.h
index 8e913c3..376ce18 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -12,7 +12,19 @@
 
 #include <linux/types.h>
 
-#include <mach/gpio-switch.h>
+#include <plat/gpio-switch.h>
+
+/*
+ * OMAP35x EVM revision
+ * Run time detection of EVM revision is done by reading Ethernet
+ * PHY ID -
+ *	GEN_1	= 0x01150000
+ *	GEN_2	= 0x92200000
+ */
+enum {
+	OMAP3EVM_BOARD_GEN_1 = 0,	/* EVM Rev between  A - D */
+	OMAP3EVM_BOARD_GEN_2,		/* EVM Rev >= Rev E */
+};
 
 /* Different peripheral ids */
 #define OMAP_TAG_CLOCK		0x4f01
@@ -102,15 +114,6 @@ struct omap_pwm_led_platform_data {
 	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
 };
 
-/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
-struct omap_gpio_switch_config {
-	char name[12];
-	u16 gpio;
-	int flags:4;
-	int type:4;
-	int key_code:24; /* Linux key code */
-};
-
 struct omap_uart_config {
 	/* Bit field of UARTs present; bit 0 --> UART1 */
 	unsigned int enabled_uarts;
@@ -157,4 +160,10 @@ extern int omap_board_config_size;
 /* for TI reference platforms sharing the same debug card */
 extern int debug_card_init(u32 addr, unsigned gpio);
 
+/* OMAP3EVM revision */
+#if defined(CONFIG_MACH_OMAP3EVM)
+u8 get_omap3_evm_rev(void);
+#else
+#define get_omap3_evm_rev() (-EINVAL)
+#endif
 #endif
diff --git a/arch/arm/plat-omap/include/mach/clkdev.h b/arch/arm/plat-omap/include/plat/clkdev.h
index 730c49d..730c49d 100644
--- a/arch/arm/plat-omap/include/mach/clkdev.h
+++ b/arch/arm/plat-omap/include/plat/clkdev.h
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
new file mode 100644
index 0000000..35b36ca
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -0,0 +1,41 @@
+/*
+ * clkdev <-> OMAP integration
+ *
+ * Russell King <linux@arm.linux.org.uk>
+ *
+ */
+
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
+
+#include <asm/clkdev.h>
+
+struct omap_clk {
+	u16				cpu;
+	struct clk_lookup		lk;
+};
+
+#define CLK(dev, con, ck, cp) 		\
+	{				\
+		 .cpu = cp,		\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
+
+
+#define CK_310		(1 << 0)
+#define CK_7XX		(1 << 1)
+#define CK_1510		(1 << 2)
+#define CK_16XX		(1 << 3)
+#define CK_243X		(1 << 4)
+#define CK_242X		(1 << 5)
+#define CK_343X		(1 << 6)
+#define CK_3430ES1	(1 << 7)
+#define CK_3430ES2	(1 << 8)
+#define CK_443X		(1 << 9)
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 4b8b0d6..309b6d1 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -13,6 +13,8 @@
 #ifndef __ARCH_ARM_OMAP_CLOCK_H
 #define __ARCH_ARM_OMAP_CLOCK_H
 
+#include <linux/list.h>
+
 struct module;
 struct clk;
 struct clockdomain;
@@ -148,6 +150,8 @@ extern const struct clkops clkops_null;
 #define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
 #define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
 #define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
+#define CLOCK_IN_OMAP4430	(1 << 13)
+#define ALWAYS_ENABLED		(1 << 14)
 /* bits 13-31 are currently free */
 
 /* Clksel_rate flags */
@@ -156,6 +160,7 @@ extern const struct clkops clkops_null;
 #define RATE_IN_243X		(1 << 2)
 #define RATE_IN_343X		(1 << 3)	/* rates common to all 343X */
 #define RATE_IN_3430ES2		(1 << 4)	/* 3430ES2 rates only */
+#define RATE_IN_4430            (1 << 5)
 
 #define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
 
diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/plat/clockdomain.h
index 99ebd88..eb73482 100644
--- a/arch/arm/plat-omap/include/mach/clockdomain.h
+++ b/arch/arm/plat-omap/include/plat/clockdomain.h
@@ -16,9 +16,9 @@
 #ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
 #define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
 
-#include <mach/powerdomain.h>
-#include <mach/clock.h>
-#include <mach/cpu.h>
+#include <plat/powerdomain.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
 
 /* Clockdomain capability flags */
 #define CLKDM_CAN_FORCE_SLEEP			(1 << 0)
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/plat/common.h
index fdeab42..32c2227 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -27,24 +27,15 @@
 #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
 #define __ARCH_ARM_MACH_OMAP_COMMON_H
 
-#include <linux/i2c.h>
+#include <plat/i2c.h>
 
 struct sys_timer;
 
+/* used by omap-smp.c and board-4430sdp.c */
+extern void __iomem *gic_cpu_base_addr;
+
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len);
-#else
-static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len)
-{
-	return 0;
-}
-#endif
 
 /* IO bases for various OMAP processors */
 struct omap_globals {
@@ -55,6 +46,7 @@ struct omap_globals {
 	void __iomem	*ctrl;		/* System Control Module */
 	void __iomem	*prm;		/* Power and Reset Management */
 	void __iomem	*cm;		/* Clock Management */
+	void __iomem	*cm2;
 };
 
 void omap2_set_globals_242x(void);
@@ -68,4 +60,24 @@ void omap2_set_globals_sdrc(struct omap_globals *);
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
 
+/**
+ * omap_test_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed.  To use, define some integer @index in the
+ * calling code.  After running, if @index == @timeout, then the loop has
+ * timed out.
+ */
+#define omap_test_timeout(cond, timeout, index)			\
+({								\
+	for (index = 0; index < timeout; index++) {		\
+		if (cond)					\
+			break;					\
+		udelay(1);					\
+	}							\
+})
+
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/plat/control.h
index 826d317..2ae8843 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/plat/control.h
@@ -20,15 +20,18 @@
 
 #ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
-	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
 #define OMAP243X_CTRL_REGADDR(reg)					\
-	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)					\
-	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #else
-#define OMAP242X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define OMAP242X_CTRL_REGADDR(reg)					\
+		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)					\
+		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)					\
+		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -109,6 +112,8 @@
 #define OMAP24XX_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e0)
 #define OMAP24XX_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00e4)
 
+#define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0)
+
 /* 34xx-only CONTROL_GENERAL register offsets */
 #define OMAP343X_CONTROL_PADCONF_OFF	(OMAP2_CONTROL_GENERAL + 0x0000)
 #define OMAP343X_CONTROL_MEM_DFTRW0	(OMAP2_CONTROL_GENERAL + 0x0008)
@@ -141,8 +146,51 @@
 #define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
 #define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
 #define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
-#define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02b0)
-#define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02b4)
+#define OMAP343X_CONTROL_DEBOBS(i)	(OMAP2_CONTROL_GENERAL + 0x01B0 \
+					+ ((i) >> 1) * 4 + (!(i) & 1) * 2)
+#define OMAP343X_CONTROL_PROG_IO0	(OMAP2_CONTROL_GENERAL + 0x01D4)
+#define OMAP343X_CONTROL_PROG_IO1	(OMAP2_CONTROL_GENERAL + 0x01D8)
+#define OMAP343X_CONTROL_DSS_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E0)
+#define OMAP343X_CONTROL_CORE_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E4)
+#define OMAP343X_CONTROL_PER_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E8)
+#define OMAP343X_CONTROL_USBHOST_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01EC)
+#define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02B0)
+#define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02B4)
+#define OMAP343X_CONTROL_SRAMLDO4	(OMAP2_CONTROL_GENERAL + 0x02B8)
+#define OMAP343X_CONTROL_SRAMLDO5	(OMAP2_CONTROL_GENERAL + 0x02C0)
+#define OMAP343X_CONTROL_CSI		(OMAP2_CONTROL_GENERAL + 0x02C4)
+
+
+/* 34xx PADCONF register offsets */
+#define OMAP343X_PADCONF_ETK(i)		(OMAP2_CONTROL_PADCONFS + 0x5a8 + \
+						(i)*2)
+#define OMAP343X_PADCONF_ETK_CLK	OMAP343X_PADCONF_ETK(0)
+#define OMAP343X_PADCONF_ETK_CTL	OMAP343X_PADCONF_ETK(1)
+#define OMAP343X_PADCONF_ETK_D0		OMAP343X_PADCONF_ETK(2)
+#define OMAP343X_PADCONF_ETK_D1		OMAP343X_PADCONF_ETK(3)
+#define OMAP343X_PADCONF_ETK_D2		OMAP343X_PADCONF_ETK(4)
+#define OMAP343X_PADCONF_ETK_D3		OMAP343X_PADCONF_ETK(5)
+#define OMAP343X_PADCONF_ETK_D4		OMAP343X_PADCONF_ETK(6)
+#define OMAP343X_PADCONF_ETK_D5		OMAP343X_PADCONF_ETK(7)
+#define OMAP343X_PADCONF_ETK_D6		OMAP343X_PADCONF_ETK(8)
+#define OMAP343X_PADCONF_ETK_D7		OMAP343X_PADCONF_ETK(9)
+#define OMAP343X_PADCONF_ETK_D8		OMAP343X_PADCONF_ETK(10)
+#define OMAP343X_PADCONF_ETK_D9		OMAP343X_PADCONF_ETK(11)
+#define OMAP343X_PADCONF_ETK_D10	OMAP343X_PADCONF_ETK(12)
+#define OMAP343X_PADCONF_ETK_D11	OMAP343X_PADCONF_ETK(13)
+#define OMAP343X_PADCONF_ETK_D12	OMAP343X_PADCONF_ETK(14)
+#define OMAP343X_PADCONF_ETK_D13	OMAP343X_PADCONF_ETK(15)
+#define OMAP343X_PADCONF_ETK_D14	OMAP343X_PADCONF_ETK(16)
+#define OMAP343X_PADCONF_ETK_D15	OMAP343X_PADCONF_ETK(17)
+
+/* 34xx GENERAL_WKUP regist offsets */
+#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
+						0x008 + (i))
+#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
+#define OMAP343X_CONTROL_WKUP_DEBOBS1 (OMAP343X_CONTROL_GENERAL_WKUP + 0x00C)
+#define OMAP343X_CONTROL_WKUP_DEBOBS2 (OMAP343X_CONTROL_GENERAL_WKUP + 0x010)
+#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
+#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
 
 /* 34xx D2D idle-related pins, handled by PM core */
 #define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
@@ -193,6 +241,9 @@
 #define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
 #define OMAP2_PBIASLITEVMODE0		(1 << 0)
 
+/* CONTROL_PROG_IO1 bits */
+#define OMAP3630_PRG_SDMMC1_SPEEDCTRL	(1 << 20)
+
 /* CONTROL_IVA2_BOOTMOD bits */
 #define OMAP3_IVA2_BOOTMOD_SHIFT	0
 #define OMAP3_IVA2_BOOTMOD_MASK		(0xf << 0)
@@ -202,6 +253,44 @@
 #define OMAP3_PADCONF_WAKEUPEVENT0	(1 << 15)
 #define OMAP3_PADCONF_WAKEUPENABLE0	(1 << 14)
 
+#define OMAP343X_SCRATCHPAD_ROM		(OMAP343X_CTRL_BASE + 0x860)
+#define OMAP343X_SCRATCHPAD		(OMAP343X_CTRL_BASE + 0x910)
+#define OMAP343X_SCRATCHPAD_ROM_OFFSET	0x19C
+
+/*
+ * CONTROL OMAP STATUS register to identify OMAP3 features
+ */
+#define OMAP3_CONTROL_OMAP_STATUS	0x044c
+
+#define OMAP3_SGX_SHIFT			13
+#define OMAP3_SGX_MASK			(3 << OMAP3_SGX_SHIFT)
+#define		FEAT_SGX_FULL		0
+#define		FEAT_SGX_HALF		1
+#define		FEAT_SGX_NONE		2
+
+#define OMAP3_IVA_SHIFT			12
+#define OMAP3_IVA_MASK			(1 << OMAP3_SGX_SHIFT)
+#define		FEAT_IVA		0
+#define		FEAT_IVA_NONE		1
+
+#define OMAP3_L2CACHE_SHIFT		10
+#define OMAP3_L2CACHE_MASK		(3 << OMAP3_L2CACHE_SHIFT)
+#define		FEAT_L2CACHE_NONE	0
+#define		FEAT_L2CACHE_64KB	1
+#define		FEAT_L2CACHE_128KB	2
+#define		FEAT_L2CACHE_256KB	3
+
+#define OMAP3_ISP_SHIFT			5
+#define OMAP3_ISP_MASK			(1<< OMAP3_ISP_SHIFT)
+#define		FEAT_ISP		0
+#define		FEAT_ISP_NONE		1
+
+#define OMAP3_NEON_SHIFT		4
+#define OMAP3_NEON_MASK			(1<< OMAP3_NEON_SHIFT)
+#define		FEAT_NEON		0
+#define		FEAT_NEON_NONE		1
+
+
 #ifndef __ASSEMBLY__
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 		defined(CONFIG_ARCH_OMAP4)
@@ -212,6 +301,15 @@ extern u32 omap_ctrl_readl(u16 offset);
 extern void omap_ctrl_writeb(u8 val, u16 offset);
 extern void omap_ctrl_writew(u16 val, u16 offset);
 extern void omap_ctrl_writel(u32 val, u16 offset);
+
+extern void omap3_save_scratchpad_contents(void);
+extern void omap3_clear_scratchpad_contents(void);
+extern u32 *get_restore_pointer(void);
+extern u32 *get_es3_restore_pointer(void);
+extern u32 omap3_arm_context[128];
+extern void omap3_control_save_context(void);
+extern void omap3_control_restore_context(void);
+
 #else
 #define omap_ctrl_base_get()		0
 #define omap_ctrl_readb(x)		0
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index f129efb..9a028bd 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -30,6 +30,8 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H
 
+#include <linux/bitops.h>
+
 /*
  * Omap device type i.e. EMU/HS/TST/GP/BAD
  */
@@ -57,6 +59,23 @@ struct omap_chip_id {
 unsigned int omap_rev(void);
 
 /*
+ * Define CPU revision bits
+ *
+ * Verbose meaning of the revision bits may be different for a silicon
+ * family. This difference can be handled separately.
+ */
+#define OMAP_REVBITS_00		0x00
+#define OMAP_REVBITS_10		0x10
+#define OMAP_REVBITS_20		0x20
+#define OMAP_REVBITS_30		0x30
+#define OMAP_REVBITS_40		0x40
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
+
+/*
  * Test if multicore OMAP support is needed
  */
 #undef MULTI_OMAP1
@@ -157,10 +176,13 @@ IS_OMAP_CLASS(15xx, 0x15)
 IS_OMAP_CLASS(16xx, 0x16)
 IS_OMAP_CLASS(24xx, 0x24)
 IS_OMAP_CLASS(34xx, 0x34)
+IS_OMAP_CLASS(44xx, 0x44)
 
 IS_OMAP_SUBCLASS(242x, 0x242)
 IS_OMAP_SUBCLASS(243x, 0x243)
 IS_OMAP_SUBCLASS(343x, 0x343)
+IS_OMAP_SUBCLASS(363x, 0x363)
+IS_OMAP_SUBCLASS(443x, 0x443)
 
 #define cpu_is_omap7xx()		0
 #define cpu_is_omap15xx()		0
@@ -264,6 +286,8 @@ IS_OMAP_SUBCLASS(343x, 0x343)
  * cpu_is_omap2423():	True for OMAP2423
  * cpu_is_omap2430():	True for OMAP2430
  * cpu_is_omap3430():	True for OMAP3430
+ * cpu_is_omap3505():	True for OMAP3505
+ * cpu_is_omap3517():	True for OMAP3517
  */
 #define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
 
@@ -287,6 +311,8 @@ IS_OMAP_TYPE(2422, 0x2422)
 IS_OMAP_TYPE(2423, 0x2423)
 IS_OMAP_TYPE(2430, 0x2430)
 IS_OMAP_TYPE(3430, 0x3430)
+IS_OMAP_TYPE(3505, 0x3505)
+IS_OMAP_TYPE(3517, 0x3517)
 
 #define cpu_is_omap310()		0
 #define cpu_is_omap730()		0
@@ -301,7 +327,14 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_is_omap2422()		0
 #define cpu_is_omap2423()		0
 #define cpu_is_omap2430()		0
+#define cpu_is_omap3503()		0
+#define cpu_is_omap3515()		0
+#define cpu_is_omap3525()		0
+#define cpu_is_omap3530()		0
+#define cpu_is_omap3505()		0
+#define cpu_is_omap3517()		0
 #define cpu_is_omap3430()		0
+#define cpu_is_omap3630()		0
 
 /*
  * Whether we have MULTI_OMAP1 or not, we still need to distinguish
@@ -351,14 +384,34 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 #if defined(CONFIG_ARCH_OMAP34XX)
 # undef cpu_is_omap3430
+# undef cpu_is_omap3503
+# undef cpu_is_omap3515
+# undef cpu_is_omap3525
+# undef cpu_is_omap3530
+# undef cpu_is_omap3505
+# undef cpu_is_omap3517
 # define cpu_is_omap3430()		is_omap3430()
+# define cpu_is_omap3503()		(cpu_is_omap3430() &&		\
+						(!omap3_has_iva()) &&	\
+						(!omap3_has_sgx()))
+# define cpu_is_omap3515()		(cpu_is_omap3430() &&		\
+						(!omap3_has_iva()) &&	\
+						(omap3_has_sgx()))
+# define cpu_is_omap3525()		(cpu_is_omap3430() &&		\
+						(!omap3_has_sgx()) &&	\
+						(omap3_has_iva()))
+# define cpu_is_omap3530()		(cpu_is_omap3430())
+# define cpu_is_omap3505()		is_omap3505()
+# define cpu_is_omap3517()		is_omap3517()
+# undef cpu_is_omap3630
+# define cpu_is_omap3630()		is_omap363x()
 #endif
 
 # if defined(CONFIG_ARCH_OMAP4)
 # undef cpu_is_omap44xx
 # undef cpu_is_omap443x
-# define cpu_is_omap44xx()		1
-# define cpu_is_omap443x()		1
+# define cpu_is_omap44xx()		is_omap44xx()
+# define cpu_is_omap443x()		is_omap443x()
 # endif
 
 /* Macros to detect if we have OMAP1 or OMAP2 */
@@ -382,7 +435,18 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP3430_REV_ES3_0	0x34303034
 #define OMAP3430_REV_ES3_1	0x34304034
 
-#define OMAP443X_CLASS		0x44300034
+#define OMAP3630_REV_ES1_0	0x36300034
+
+#define OMAP35XX_CLASS		0x35000034
+#define OMAP3503_REV(v)		(OMAP35XX_CLASS | (0x3503 << 16) | (v << 8))
+#define OMAP3515_REV(v)		(OMAP35XX_CLASS | (0x3515 << 16) | (v << 8))
+#define OMAP3525_REV(v)		(OMAP35XX_CLASS | (0x3525 << 16) | (v << 8))
+#define OMAP3530_REV(v)		(OMAP35XX_CLASS | (0x3530 << 16) | (v << 8))
+#define OMAP3505_REV(v)		(OMAP35XX_CLASS | (0x3505 << 16) | (v << 8))
+#define OMAP3517_REV(v)		(OMAP35XX_CLASS | (0x3517 << 16) | (v << 8))
+
+#define OMAP443X_CLASS		0x44300044
+#define OMAP4430_REV_ES1_0	0x44300044
 
 /*
  * omap_chip bits
@@ -405,6 +469,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define CHIP_IS_OMAP3430ES2		(1 << 4)
 #define CHIP_IS_OMAP3430ES3_0		(1 << 5)
 #define CHIP_IS_OMAP3430ES3_1		(1 << 6)
+#define CHIP_IS_OMAP3630ES1		(1 << 7)
 
 #define CHIP_IS_OMAP24XX		(CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
 
@@ -416,11 +481,36 @@ IS_OMAP_TYPE(3430, 0x3430)
  */
 #define CHIP_GE_OMAP3430ES2		(CHIP_IS_OMAP3430ES2 | \
 					 CHIP_IS_OMAP3430ES3_0 | \
-					 CHIP_IS_OMAP3430ES3_1)
-#define CHIP_GE_OMAP3430ES3_1		(CHIP_IS_OMAP3430ES3_1)
+					 CHIP_IS_OMAP3430ES3_1 | \
+					 CHIP_IS_OMAP3630ES1)
+#define CHIP_GE_OMAP3430ES3_1		(CHIP_IS_OMAP3430ES3_1 | \
+					 CHIP_IS_OMAP3630ES1)
 
 
 int omap_chip_is(struct omap_chip_id oci);
 void omap2_check_revision(void);
 
+/*
+ * Runtime detection of OMAP3 features
+ */
+extern u32 omap3_features;
+
+#define OMAP3_HAS_L2CACHE		BIT(0)
+#define OMAP3_HAS_IVA			BIT(1)
+#define OMAP3_HAS_SGX			BIT(2)
+#define OMAP3_HAS_NEON			BIT(3)
+#define OMAP3_HAS_ISP			BIT(4)
+
+#define OMAP3_HAS_FEATURE(feat,flag)			\
+static inline unsigned int omap3_has_ ##feat(void)	\
+{							\
+	return (omap3_features & OMAP3_HAS_ ##flag);	\
+}							\
+
+OMAP3_HAS_FEATURE(l2cache, L2CACHE)
+OMAP3_HAS_FEATURE(sgx, SGX)
+OMAP3_HAS_FEATURE(iva, IVA)
+OMAP3_HAS_FEATURE(neon, NEON)
+OMAP3_HAS_FEATURE(isp, ISP)
+
 #endif
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h
new file mode 100644
index 0000000..c66e464
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/display.h
@@ -0,0 +1,575 @@
+/*
+ * linux/include/asm-arm/arch-omap/display.h
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ASM_ARCH_OMAP_DISPLAY_H
+#define __ASM_ARCH_OMAP_DISPLAY_H
+
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <asm/atomic.h>
+
+#define DISPC_IRQ_FRAMEDONE		(1 << 0)
+#define DISPC_IRQ_VSYNC			(1 << 1)
+#define DISPC_IRQ_EVSYNC_EVEN		(1 << 2)
+#define DISPC_IRQ_EVSYNC_ODD		(1 << 3)
+#define DISPC_IRQ_ACBIAS_COUNT_STAT	(1 << 4)
+#define DISPC_IRQ_PROG_LINE_NUM		(1 << 5)
+#define DISPC_IRQ_GFX_FIFO_UNDERFLOW	(1 << 6)
+#define DISPC_IRQ_GFX_END_WIN		(1 << 7)
+#define DISPC_IRQ_PAL_GAMMA_MASK	(1 << 8)
+#define DISPC_IRQ_OCP_ERR		(1 << 9)
+#define DISPC_IRQ_VID1_FIFO_UNDERFLOW	(1 << 10)
+#define DISPC_IRQ_VID1_END_WIN		(1 << 11)
+#define DISPC_IRQ_VID2_FIFO_UNDERFLOW	(1 << 12)
+#define DISPC_IRQ_VID2_END_WIN		(1 << 13)
+#define DISPC_IRQ_SYNC_LOST		(1 << 14)
+#define DISPC_IRQ_SYNC_LOST_DIGIT	(1 << 15)
+#define DISPC_IRQ_WAKEUP		(1 << 16)
+
+struct omap_dss_device;
+struct omap_overlay_manager;
+
+enum omap_display_type {
+	OMAP_DISPLAY_TYPE_NONE		= 0,
+	OMAP_DISPLAY_TYPE_DPI		= 1 << 0,
+	OMAP_DISPLAY_TYPE_DBI		= 1 << 1,
+	OMAP_DISPLAY_TYPE_SDI		= 1 << 2,
+	OMAP_DISPLAY_TYPE_DSI		= 1 << 3,
+	OMAP_DISPLAY_TYPE_VENC		= 1 << 4,
+};
+
+enum omap_plane {
+	OMAP_DSS_GFX	= 0,
+	OMAP_DSS_VIDEO1	= 1,
+	OMAP_DSS_VIDEO2	= 2
+};
+
+enum omap_channel {
+	OMAP_DSS_CHANNEL_LCD	= 0,
+	OMAP_DSS_CHANNEL_DIGIT	= 1,
+};
+
+enum omap_color_mode {
+	OMAP_DSS_COLOR_CLUT1	= 1 << 0,  /* BITMAP 1 */
+	OMAP_DSS_COLOR_CLUT2	= 1 << 1,  /* BITMAP 2 */
+	OMAP_DSS_COLOR_CLUT4	= 1 << 2,  /* BITMAP 4 */
+	OMAP_DSS_COLOR_CLUT8	= 1 << 3,  /* BITMAP 8 */
+	OMAP_DSS_COLOR_RGB12U	= 1 << 4,  /* RGB12, 16-bit container */
+	OMAP_DSS_COLOR_ARGB16	= 1 << 5,  /* ARGB16 */
+	OMAP_DSS_COLOR_RGB16	= 1 << 6,  /* RGB16 */
+	OMAP_DSS_COLOR_RGB24U	= 1 << 7,  /* RGB24, 32-bit container */
+	OMAP_DSS_COLOR_RGB24P	= 1 << 8,  /* RGB24, 24-bit container */
+	OMAP_DSS_COLOR_YUV2	= 1 << 9,  /* YUV2 4:2:2 co-sited */
+	OMAP_DSS_COLOR_UYVY	= 1 << 10, /* UYVY 4:2:2 co-sited */
+	OMAP_DSS_COLOR_ARGB32	= 1 << 11, /* ARGB32 */
+	OMAP_DSS_COLOR_RGBA32	= 1 << 12, /* RGBA32 */
+	OMAP_DSS_COLOR_RGBX32	= 1 << 13, /* RGBx32 */
+
+	OMAP_DSS_COLOR_GFX_OMAP2 =
+		OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
+		OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 |
+		OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P,
+
+	OMAP_DSS_COLOR_VID_OMAP2 =
+		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
+		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 |
+		OMAP_DSS_COLOR_UYVY,
+
+	OMAP_DSS_COLOR_GFX_OMAP3 =
+		OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
+		OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
+		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
+		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
+		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
+
+	OMAP_DSS_COLOR_VID1_OMAP3 =
+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 |
+		OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P |
+		OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY,
+
+	OMAP_DSS_COLOR_VID2_OMAP3 =
+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
+		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
+		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 |
+		OMAP_DSS_COLOR_UYVY | OMAP_DSS_COLOR_ARGB32 |
+		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
+};
+
+enum omap_lcd_display_type {
+	OMAP_DSS_LCD_DISPLAY_STN,
+	OMAP_DSS_LCD_DISPLAY_TFT,
+};
+
+enum omap_dss_load_mode {
+	OMAP_DSS_LOAD_CLUT_AND_FRAME	= 0,
+	OMAP_DSS_LOAD_CLUT_ONLY		= 1,
+	OMAP_DSS_LOAD_FRAME_ONLY	= 2,
+	OMAP_DSS_LOAD_CLUT_ONCE_FRAME	= 3,
+};
+
+enum omap_dss_trans_key_type {
+	OMAP_DSS_COLOR_KEY_GFX_DST = 0,
+	OMAP_DSS_COLOR_KEY_VID_SRC = 1,
+};
+
+enum omap_rfbi_te_mode {
+	OMAP_DSS_RFBI_TE_MODE_1 = 1,
+	OMAP_DSS_RFBI_TE_MODE_2 = 2,
+};
+
+enum omap_panel_config {
+	OMAP_DSS_LCD_IVS		= 1<<0,
+	OMAP_DSS_LCD_IHS		= 1<<1,
+	OMAP_DSS_LCD_IPC		= 1<<2,
+	OMAP_DSS_LCD_IEO		= 1<<3,
+	OMAP_DSS_LCD_RF			= 1<<4,
+	OMAP_DSS_LCD_ONOFF		= 1<<5,
+
+	OMAP_DSS_LCD_TFT		= 1<<20,
+};
+
+enum omap_dss_venc_type {
+	OMAP_DSS_VENC_TYPE_COMPOSITE,
+	OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+enum omap_display_caps {
+	OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE	= 1 << 0,
+	OMAP_DSS_DISPLAY_CAP_TEAR_ELIM		= 1 << 1,
+};
+
+enum omap_dss_update_mode {
+	OMAP_DSS_UPDATE_DISABLED = 0,
+	OMAP_DSS_UPDATE_AUTO,
+	OMAP_DSS_UPDATE_MANUAL,
+};
+
+enum omap_dss_display_state {
+	OMAP_DSS_DISPLAY_DISABLED = 0,
+	OMAP_DSS_DISPLAY_ACTIVE,
+	OMAP_DSS_DISPLAY_SUSPENDED,
+};
+
+/* XXX perhaps this should be removed */
+enum omap_dss_overlay_managers {
+	OMAP_DSS_OVL_MGR_LCD,
+	OMAP_DSS_OVL_MGR_TV,
+};
+
+enum omap_dss_rotation_type {
+	OMAP_DSS_ROT_DMA = 0,
+	OMAP_DSS_ROT_VRFB = 1,
+};
+
+/* clockwise rotation angle */
+enum omap_dss_rotation_angle {
+	OMAP_DSS_ROT_0   = 0,
+	OMAP_DSS_ROT_90  = 1,
+	OMAP_DSS_ROT_180 = 2,
+	OMAP_DSS_ROT_270 = 3,
+};
+
+enum omap_overlay_caps {
+	OMAP_DSS_OVL_CAP_SCALE = 1 << 0,
+	OMAP_DSS_OVL_CAP_DISPC = 1 << 1,
+};
+
+enum omap_overlay_manager_caps {
+	OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0,
+};
+
+/* RFBI */
+
+struct rfbi_timings {
+	int cs_on_time;
+	int cs_off_time;
+	int we_on_time;
+	int we_off_time;
+	int re_on_time;
+	int re_off_time;
+	int we_cycle_time;
+	int re_cycle_time;
+	int cs_pulse_width;
+	int access_time;
+
+	int clk_div;
+
+	u32 tim[5];             /* set by rfbi_convert_timings() */
+
+	int converted;
+};
+
+void omap_rfbi_write_command(const void *buf, u32 len);
+void omap_rfbi_read_data(void *buf, u32 len);
+void omap_rfbi_write_data(const void *buf, u32 len);
+void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
+		u16 x, u16 y,
+		u16 w, u16 h);
+int omap_rfbi_enable_te(bool enable, unsigned line);
+int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
+			     unsigned hs_pulse_time, unsigned vs_pulse_time,
+			     int hs_pol_inv, int vs_pol_inv, int extif_div);
+
+/* DSI */
+void dsi_bus_lock(void);
+void dsi_bus_unlock(void);
+int dsi_vc_dcs_write(int channel, u8 *data, int len);
+int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len);
+int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen);
+int dsi_vc_set_max_rx_packet_size(int channel, u16 len);
+int dsi_vc_send_null(int channel);
+int dsi_vc_send_bta_sync(int channel);
+
+/* Board specific data */
+struct omap_dss_board_info {
+	int (*get_last_off_on_transaction_id)(struct device *dev);
+	int num_devices;
+	struct omap_dss_device **devices;
+	struct omap_dss_device *default_device;
+};
+
+struct omap_video_timings {
+	/* Unit: pixels */
+	u16 x_res;
+	/* Unit: pixels */
+	u16 y_res;
+	/* Unit: KHz */
+	u32 pixel_clock;
+	/* Unit: pixel clocks */
+	u16 hsw;	/* Horizontal synchronization pulse width */
+	/* Unit: pixel clocks */
+	u16 hfp;	/* Horizontal front porch */
+	/* Unit: pixel clocks */
+	u16 hbp;	/* Horizontal back porch */
+	/* Unit: line clocks */
+	u16 vsw;	/* Vertical synchronization pulse width */
+	/* Unit: line clocks */
+	u16 vfp;	/* Vertical front porch */
+	/* Unit: line clocks */
+	u16 vbp;	/* Vertical back porch */
+};
+
+#ifdef CONFIG_OMAP2_DSS_VENC
+/* Hardcoded timings for tv modes. Venc only uses these to
+ * identify the mode, and does not actually use the configs
+ * itself. However, the configs should be something that
+ * a normal monitor can also show */
+const extern struct omap_video_timings omap_dss_pal_timings;
+const extern struct omap_video_timings omap_dss_ntsc_timings;
+#endif
+
+struct omap_overlay_info {
+	bool enabled;
+
+	u32 paddr;
+	void __iomem *vaddr;
+	u16 screen_width;
+	u16 width;
+	u16 height;
+	enum omap_color_mode color_mode;
+	u8 rotation;
+	enum omap_dss_rotation_type rotation_type;
+	bool mirror;
+
+	u16 pos_x;
+	u16 pos_y;
+	u16 out_width;	/* if 0, out_width == width */
+	u16 out_height;	/* if 0, out_height == height */
+	u8 global_alpha;
+};
+
+struct omap_overlay {
+	struct kobject kobj;
+	struct list_head list;
+
+	/* static fields */
+	const char *name;
+	int id;
+	enum omap_color_mode supported_modes;
+	enum omap_overlay_caps caps;
+
+	/* dynamic fields */
+	struct omap_overlay_manager *manager;
+	struct omap_overlay_info info;
+
+	/* if true, info has been changed, but not applied() yet */
+	bool info_dirty;
+
+	int (*set_manager)(struct omap_overlay *ovl,
+		struct omap_overlay_manager *mgr);
+	int (*unset_manager)(struct omap_overlay *ovl);
+
+	int (*set_overlay_info)(struct omap_overlay *ovl,
+			struct omap_overlay_info *info);
+	void (*get_overlay_info)(struct omap_overlay *ovl,
+			struct omap_overlay_info *info);
+
+	int (*wait_for_go)(struct omap_overlay *ovl);
+};
+
+struct omap_overlay_manager_info {
+	u32 default_color;
+
+	enum omap_dss_trans_key_type trans_key_type;
+	u32 trans_key;
+	bool trans_enabled;
+
+	bool alpha_enabled;
+};
+
+struct omap_overlay_manager {
+	struct kobject kobj;
+	struct list_head list;
+
+	/* static fields */
+	const char *name;
+	int id;
+	enum omap_overlay_manager_caps caps;
+	int num_overlays;
+	struct omap_overlay **overlays;
+	enum omap_display_type supported_displays;
+
+	/* dynamic fields */
+	struct omap_dss_device *device;
+	struct omap_overlay_manager_info info;
+
+	bool device_changed;
+	/* if true, info has been changed but not applied() yet */
+	bool info_dirty;
+
+	int (*set_device)(struct omap_overlay_manager *mgr,
+		struct omap_dss_device *dssdev);
+	int (*unset_device)(struct omap_overlay_manager *mgr);
+
+	int (*set_manager_info)(struct omap_overlay_manager *mgr,
+			struct omap_overlay_manager_info *info);
+	void (*get_manager_info)(struct omap_overlay_manager *mgr,
+			struct omap_overlay_manager_info *info);
+
+	int (*apply)(struct omap_overlay_manager *mgr);
+	int (*wait_for_go)(struct omap_overlay_manager *mgr);
+};
+
+struct omap_dss_device {
+	struct device dev;
+
+	enum omap_display_type type;
+
+	union {
+		struct {
+			u8 data_lines;
+		} dpi;
+
+		struct {
+			u8 channel;
+			u8 data_lines;
+		} rfbi;
+
+		struct {
+			u8 datapairs;
+		} sdi;
+
+		struct {
+			u8 clk_lane;
+			u8 clk_pol;
+			u8 data1_lane;
+			u8 data1_pol;
+			u8 data2_lane;
+			u8 data2_pol;
+
+			struct {
+				u16 regn;
+				u16 regm;
+				u16 regm3;
+				u16 regm4;
+
+				u16 lp_clk_div;
+
+				u16 lck_div;
+				u16 pck_div;
+			} div;
+
+			bool ext_te;
+			u8 ext_te_gpio;
+		} dsi;
+
+		struct {
+			enum omap_dss_venc_type type;
+			bool invert_polarity;
+		} venc;
+	} phy;
+
+	struct {
+		struct omap_video_timings timings;
+
+		int acbi;	/* ac-bias pin transitions per interrupt */
+		/* Unit: line clocks */
+		int acb;	/* ac-bias pin frequency */
+
+		enum omap_panel_config config;
+
+		u8 recommended_bpp;
+
+		struct omap_dss_device *ctrl;
+	} panel;
+
+	struct {
+		u8 pixel_size;
+		struct rfbi_timings rfbi_timings;
+		struct omap_dss_device *panel;
+	} ctrl;
+
+	int reset_gpio;
+
+	int max_backlight_level;
+
+	const char *name;
+
+	/* used to match device to driver */
+	const char *driver_name;
+
+	void *data;
+
+	struct omap_dss_driver *driver;
+
+	/* helper variable for driver suspend/resume */
+	bool activate_after_resume;
+
+	enum omap_display_caps caps;
+
+	struct omap_overlay_manager *manager;
+
+	enum omap_dss_display_state state;
+
+	int (*enable)(struct omap_dss_device *dssdev);
+	void (*disable)(struct omap_dss_device *dssdev);
+
+	int (*suspend)(struct omap_dss_device *dssdev);
+	int (*resume)(struct omap_dss_device *dssdev);
+
+	void (*get_resolution)(struct omap_dss_device *dssdev,
+			u16 *xres, u16 *yres);
+	int (*get_recommended_bpp)(struct omap_dss_device *dssdev);
+
+	int (*check_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	void (*set_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	void (*get_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	int (*update)(struct omap_dss_device *dssdev,
+			       u16 x, u16 y, u16 w, u16 h);
+	int (*sync)(struct omap_dss_device *dssdev);
+	int (*wait_vsync)(struct omap_dss_device *dssdev);
+
+	int (*set_update_mode)(struct omap_dss_device *dssdev,
+			enum omap_dss_update_mode);
+	enum omap_dss_update_mode (*get_update_mode)
+		(struct omap_dss_device *dssdev);
+
+	int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
+	int (*get_te)(struct omap_dss_device *dssdev);
+
+	u8 (*get_rotate)(struct omap_dss_device *dssdev);
+	int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
+
+	bool (*get_mirror)(struct omap_dss_device *dssdev);
+	int (*set_mirror)(struct omap_dss_device *dssdev, bool enable);
+
+	int (*run_test)(struct omap_dss_device *dssdev, int test);
+	int (*memory_read)(struct omap_dss_device *dssdev,
+			void *buf, size_t size,
+			u16 x, u16 y, u16 w, u16 h);
+
+	int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
+	u32 (*get_wss)(struct omap_dss_device *dssdev);
+
+	/* platform specific  */
+	int (*platform_enable)(struct omap_dss_device *dssdev);
+	void (*platform_disable)(struct omap_dss_device *dssdev);
+	int (*set_backlight)(struct omap_dss_device *dssdev, int level);
+	int (*get_backlight)(struct omap_dss_device *dssdev);
+};
+
+struct omap_dss_driver {
+	struct device_driver driver;
+
+	int (*probe)(struct omap_dss_device *);
+	void (*remove)(struct omap_dss_device *);
+
+	int (*enable)(struct omap_dss_device *display);
+	void (*disable)(struct omap_dss_device *display);
+	int (*suspend)(struct omap_dss_device *display);
+	int (*resume)(struct omap_dss_device *display);
+	int (*run_test)(struct omap_dss_device *display, int test);
+
+	void (*setup_update)(struct omap_dss_device *dssdev,
+			u16 x, u16 y, u16 w, u16 h);
+
+	int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
+	int (*wait_for_te)(struct omap_dss_device *dssdev);
+
+	u8 (*get_rotate)(struct omap_dss_device *dssdev);
+	int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
+
+	bool (*get_mirror)(struct omap_dss_device *dssdev);
+	int (*set_mirror)(struct omap_dss_device *dssdev, bool enable);
+
+	int (*memory_read)(struct omap_dss_device *dssdev,
+			void *buf, size_t size,
+			u16 x, u16 y, u16 w, u16 h);
+};
+
+int omap_dss_register_driver(struct omap_dss_driver *);
+void omap_dss_unregister_driver(struct omap_dss_driver *);
+
+int omap_dss_register_device(struct omap_dss_device *);
+void omap_dss_unregister_device(struct omap_dss_device *);
+
+void omap_dss_get_device(struct omap_dss_device *dssdev);
+void omap_dss_put_device(struct omap_dss_device *dssdev);
+#define for_each_dss_dev(d) while ((d = omap_dss_get_next_device(d)) != NULL)
+struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from);
+struct omap_dss_device *omap_dss_find_device(void *data,
+		int (*match)(struct omap_dss_device *dssdev, void *data));
+
+int omap_dss_start_device(struct omap_dss_device *dssdev);
+void omap_dss_stop_device(struct omap_dss_device *dssdev);
+
+int omap_dss_get_num_overlay_managers(void);
+struct omap_overlay_manager *omap_dss_get_overlay_manager(int num);
+
+int omap_dss_get_num_overlays(void);
+struct omap_overlay *omap_dss_get_overlay(int num);
+
+typedef void (*omap_dispc_isr_t) (void *arg, u32 mask);
+int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
+int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
+
+int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout);
+int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
+		unsigned long timeout);
+
+#define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver)
+#define to_dss_device(x) container_of((x), struct omap_dss_device, dev)
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index 72f680b..4ede9e1 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -401,33 +401,6 @@
 
 /*----------------------------------------------------------------------------*/
 
-/* Hardware registers for LCD DMA */
-#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
-#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
-#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
-#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
-#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
-#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
-
-#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
-#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
-#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
-#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
-#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
-#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
-#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
-#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
-#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
-#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
-#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
-#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
-#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
-#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
-#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
-#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
-
 #define OMAP1_DMA_TOUT_IRQ		(1 << 0)
 #define OMAP_DMA_DROP_IRQ		(1 << 1)
 #define OMAP_DMA_HALF_IRQ		(1 << 2)
@@ -441,6 +414,8 @@
 #define OMAP2_DMA_SUPERVISOR_ERR_IRQ	(1 << 10)
 #define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
 
+#define OMAP_DMA_CCR_EN			(1 << 7)
+
 #define OMAP_DMA_DATA_TYPE_S8		0x00
 #define OMAP_DMA_DATA_TYPE_S16		0x01
 #define OMAP_DMA_DATA_TYPE_S32		0x02
@@ -503,14 +478,6 @@
 #define DMA_CH_PRIO_HIGH		0x1
 #define DMA_CH_PRIO_LOW			0x0 /* Def */
 
-/* LCD DMA block numbers */
-enum {
-	OMAP_LCD_DMA_B1_TOP,
-	OMAP_LCD_DMA_B1_BOTTOM,
-	OMAP_LCD_DMA_B2_TOP,
-	OMAP_LCD_DMA_B2_BOTTOM
-};
-
 enum omap_dma_burst_mode {
 	OMAP_DMA_DATA_BURST_DIS = 0,
 	OMAP_DMA_DATA_BURST_4,
@@ -633,6 +600,11 @@ extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
 extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
 extern int omap_get_dma_index(int lch, int *ei, int *fi);
 
+void omap_dma_global_context_save(void);
+void omap_dma_global_context_restore(void);
+
+extern void omap_dma_disable_irq(int lch);
+
 /* Chaining APIs */
 #ifndef CONFIG_ARCH_OMAP1
 extern int omap_request_dma_chain(int dev_id, const char *dev_name,
@@ -656,20 +628,13 @@ extern int omap_modify_dma_chain_params(int chain_id,
 extern int omap_dma_chain_status(int chain_id);
 #endif
 
-/* LCD DMA functions */
-extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-				void *data);
-extern void omap_free_lcd_dma(void);
-extern void omap_setup_lcd_dma(void);
-extern void omap_enable_lcd_dma(void);
-extern void omap_stop_lcd_dma(void);
-extern void omap_set_lcd_dma_ext_controller(int external);
-extern void omap_set_lcd_dma_single_transfer(int single);
-extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-				int data_type);
-extern void omap_set_lcd_dma_b1_rotation(int rotate);
-extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
-extern void omap_set_lcd_dma_b1_mirror(int mirror);
-extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP)
+#include <mach/lcd_dma.h>
+#else
+static inline int omap_lcd_dma_running(void)
+{
+	return 0;
+}
+#endif
 
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 20f1054..20f1054 100644
--- a/arch/arm/plat-omap/include/mach/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
diff --git a/arch/arm/plat-omap/include/mach/dsp_common.h b/arch/arm/plat-omap/include/plat/dsp_common.h
index da97736..da97736 100644
--- a/arch/arm/plat-omap/include/mach/dsp_common.h
+++ b/arch/arm/plat-omap/include/plat/dsp_common.h
diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h
index f1864a6..f1864a6 100644
--- a/arch/arm/plat-omap/include/mach/fpga.h
+++ b/arch/arm/plat-omap/include/plat/fpga.h
diff --git a/arch/arm/plat-omap/include/mach/gpio-switch.h b/arch/arm/plat-omap/include/plat/gpio-switch.h
index 10da0e0..10da0e0 100644
--- a/arch/arm/plat-omap/include/mach/gpio-switch.h
+++ b/arch/arm/plat-omap/include/plat/gpio-switch.h
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 633ff68..de7c547 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -76,7 +76,8 @@ extern void omap2_gpio_prepare_for_retention(void);
 extern void omap2_gpio_resume_after_retention(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
 extern void omap_set_gpio_debounce_time(int gpio, int enable);
-
+extern void omap_gpio_save_context(void);
+extern void omap_gpio_restore_context(void);
 /*-------------------------------------------------------------------------*/
 
 /* Wrappers for "new style" GPIO calls, using the new infrastructure
diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
index b64fbee..b64fbee 100644
--- a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+++ b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 9c99cda..e081338 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -45,13 +45,14 @@
 #define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
 #define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
 #define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(1)
+#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(2)
 #define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
 #define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
 #define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
 #define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
 #define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
 #define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
+#define GPMC_CONFIG7_CSVALID		(1 << 6)
 
 /*
  * Note that all values in this struct are in nanoseconds, while
@@ -107,6 +108,8 @@ extern int gpmc_prefetch_enable(int cs, int dma_mode,
 					unsigned int u32_count, int is_write);
 extern void gpmc_prefetch_reset(void);
 extern int gpmc_prefetch_status(void);
+extern void omap3_gpmc_save_context(void);
+extern void omap3_gpmc_restore_context(void);
 extern void __init gpmc_init(void);
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
index 26c1fbf..d5b26ad 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/plat/hardware.h
@@ -39,9 +39,9 @@
 #include <asm/sizes.h>
 #ifndef __ASSEMBLER__
 #include <asm/types.h>
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 #endif
-#include <mach/serial.h>
+#include <plat/serial.h>
 
 /*
  * ---------------------------------------------------------------------------
@@ -280,11 +280,11 @@
  * ---------------------------------------------------------------------------
  */
 
-#include "omap730.h"
-#include "omap1510.h"
-#include "omap16xx.h"
-#include "omap24xx.h"
-#include "omap34xx.h"
-#include "omap44xx.h"
+#include <plat/omap7xx.h>
+#include <plat/omap1510.h>
+#include <plat/omap16xx.h>
+#include <plat/omap24xx.h>
+#include <plat/omap34xx.h>
+#include <plat/omap44xx.h>
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/plat/hwa742.h
index 886248d..886248d 100644
--- a/arch/arm/plat-omap/include/mach/hwa742.h
+++ b/arch/arm/plat-omap/include/plat/hwa742.h
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
new file mode 100644
index 0000000..585d9ca
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -0,0 +1,39 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/i2c.h>
+
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len);
+#else
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len)
+{
+	return 0;
+}
+#endif
+
+int omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len);
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/plat/io.h
index 8d32df3..7e5319f 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -63,8 +63,24 @@
 #define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
 #define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
 
-#define OMAP2_IO_OFFSET		0x90000000
-#define OMAP2_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
+#define OMAP2_L3_IO_OFFSET	0x90000000
+#define OMAP2_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
+
+
+#define OMAP2_L4_IO_OFFSET	0xb2000000
+#define OMAP2_L4_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
+
+#define OMAP4_L3_IO_OFFSET	0xb4000000
+#define OMAP4_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
+
+#define OMAP4_L3_PER_IO_OFFSET	0xb1100000
+#define OMAP4_L3_PER_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
+
+#define OMAP4_GPMC_IO_OFFSET		0xa9000000
+#define OMAP4_GPMC_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
+
+#define OMAP2_EMU_IO_OFFSET		0xaa800000	/* Emulation */
+#define OMAP2_EMU_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
 
 /*
  * ----------------------------------------------------------------------------
@@ -83,24 +99,27 @@
  */
 
 /* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
-#define L3_24XX_VIRT	0xf8000000
+#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 --> 0xf8000000*/
+#define L3_24XX_VIRT	(L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
 #define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 */
-#define L4_24XX_VIRT	0xd8000000
+#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 --> 0xfa000000 */
+#define L4_24XX_VIRT	(L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
 
-#define L4_WK_243X_PHYS		L4_WK_243X_BASE		/* 0x49000000 */
-#define L4_WK_243X_VIRT		0xd9000000
+#define L4_WK_243X_PHYS		L4_WK_243X_BASE	/* 0x49000000 --> 0xfb000000 */
+#define L4_WK_243X_VIRT		(L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_WK_243X_SIZE		SZ_1M
-#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE	/* 0x49000000 */
-#define OMAP243X_GPMC_VIRT	0xFE000000
+#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE
+#define OMAP243X_GPMC_VIRT	(OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
+						/* 0x6e000000 --> 0xfe000000 */
 #define OMAP243X_GPMC_SIZE	SZ_1M
 #define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
-#define OMAP243X_SDRC_VIRT	0xFD000000
+						/* 0x6D000000 --> 0xfd000000 */
+#define OMAP243X_SDRC_VIRT	(OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP243X_SDRC_SIZE	SZ_1M
 #define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
-#define OMAP243X_SMS_VIRT	0xFC000000
+						/* 0x6c000000 --> 0xfc000000 */
+#define OMAP243X_SMS_VIRT	(OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP243X_SMS_SIZE	SZ_1M
 
 /* DSP */
@@ -121,12 +140,12 @@
  */
 
 /* We map both L3 and L4 on OMAP3 */
-#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
-#define L3_34XX_VIRT		0xf8000000
+#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 --> 0xf8000000 */
+#define L3_34XX_VIRT		(L3_34XX_PHYS + OMAP2_L3_IO_OFFSET)
 #define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
 
-#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 */
-#define L4_34XX_VIRT		0xd8000000
+#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 --> 0xfa000000 */
+#define L4_34XX_VIRT		(L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
 
 /*
@@ -134,28 +153,33 @@
  * VPOM3430 was not working for Int controller
  */
 
-#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE /* 0x48300000 */
-#define L4_WK_34XX_VIRT		0xd8300000
+#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE	/* 0x48300000 --> 0xfa300000 */
+#define L4_WK_34XX_VIRT		(L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_WK_34XX_SIZE		SZ_1M
 
-#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE /* 0x49000000 */
-#define L4_PER_34XX_VIRT	0xd9000000
+#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE
+						/* 0x49000000 --> 0xfb000000 */
+#define L4_PER_34XX_VIRT	(L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_PER_34XX_SIZE	SZ_1M
 
-#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE /* 0x54000000 */
-#define L4_EMU_34XX_VIRT	0xe4000000
-#define L4_EMU_34XX_SIZE	SZ_64M
+#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE
+						/* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_34XX_VIRT	(L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_34XX_SIZE	SZ_8M
 
-#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE /* 0x6E000000 */
-#define OMAP34XX_GPMC_VIRT	0xFE000000
+#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE
+						/* 0x6e000000 --> 0xfe000000 */
+#define OMAP34XX_GPMC_VIRT	(OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP34XX_GPMC_SIZE	SZ_1M
 
-#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE /* 0x6C000000 */
-#define OMAP343X_SMS_VIRT	0xFC000000
+#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE
+						/* 0x6c000000 --> 0xfc000000 */
+#define OMAP343X_SMS_VIRT	(OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP343X_SMS_SIZE	SZ_1M
 
-#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE /* 0x6D000000 */
-#define OMAP343X_SDRC_VIRT	0xFD000000
+#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE
+						/* 0x6D000000 --> 0xfd000000 */
+#define OMAP343X_SDRC_VIRT	(OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP343X_SDRC_SIZE	SZ_1M
 
 /* DSP */
@@ -176,32 +200,54 @@
  */
 
 /* We map both L3 and L4 on OMAP4 */
-#define L3_44XX_PHYS		L3_44XX_BASE
-#define L3_44XX_VIRT		0xd4000000
+#define L3_44XX_PHYS		L3_44XX_BASE	/* 0x44000000 --> 0xf8000000 */
+#define L3_44XX_VIRT		(L3_44XX_PHYS + OMAP4_L3_IO_OFFSET)
 #define L3_44XX_SIZE		SZ_1M
 
-#define L4_44XX_PHYS		L4_44XX_BASE
-#define L4_44XX_VIRT		0xda000000
+#define L4_44XX_PHYS		L4_44XX_BASE	/* 0x4a000000 --> 0xfc000000 */
+#define L4_44XX_VIRT		(L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_44XX_SIZE		SZ_4M
 
 
-#define L4_WK_44XX_PHYS		L4_WK_44XX_BASE
-#define L4_WK_44XX_VIRT		0xda300000
+#define L4_WK_44XX_PHYS		L4_WK_44XX_BASE	/* 0x4a300000 --> 0xfc300000 */
+#define L4_WK_44XX_VIRT		(L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_WK_44XX_SIZE		SZ_1M
 
 #define L4_PER_44XX_PHYS	L4_PER_44XX_BASE
-#define L4_PER_44XX_VIRT	0xd8000000
+						/* 0x48000000 --> 0xfa000000 */
+#define L4_PER_44XX_VIRT	(L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_PER_44XX_SIZE	SZ_4M
 
+#define L4_ABE_44XX_PHYS	L4_ABE_44XX_BASE
+						/* 0x49000000 --> 0xfb000000 */
+#define L4_ABE_44XX_VIRT	(L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_ABE_44XX_SIZE	SZ_1M
+
 #define L4_EMU_44XX_PHYS	L4_EMU_44XX_BASE
-#define L4_EMU_44XX_VIRT	0xe4000000
-#define L4_EMU_44XX_SIZE	SZ_64M
+						/* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_44XX_VIRT	(L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_44XX_SIZE	SZ_8M
 
 #define OMAP44XX_GPMC_PHYS	OMAP44XX_GPMC_BASE
-#define OMAP44XX_GPMC_VIRT	0xe0000000
+						/* 0x50000000 --> 0xf9000000 */
+#define OMAP44XX_GPMC_VIRT	(OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
 #define OMAP44XX_GPMC_SIZE	SZ_1M
 
 
+#define OMAP44XX_EMIF1_PHYS	OMAP44XX_EMIF1_BASE
+						/* 0x4c000000 --> 0xfd100000 */
+#define OMAP44XX_EMIF1_VIRT	(OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_EMIF1_SIZE	SZ_1M
+
+#define OMAP44XX_EMIF2_PHYS	OMAP44XX_EMIF2_BASE
+						/* 0x4d000000 --> 0xfd200000 */
+#define OMAP44XX_EMIF2_VIRT	(OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_EMIF2_SIZE	SZ_1M
+
+#define OMAP44XX_DMM_PHYS	OMAP44XX_DMM_BASE
+						/* 0x4e000000 --> 0xfd300000 */
+#define OMAP44XX_DMM_VIRT	(OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_DMM_SIZE	SZ_1M
 /*
  * ----------------------------------------------------------------------------
  * Omap specific register access
diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index 46d41ac..0752af9 100644
--- a/arch/arm/plat-omap/include/mach/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -107,7 +107,7 @@ struct iommu_platform_data {
 #if defined(CONFIG_ARCH_OMAP1)
 #error "iommu for this processor not implemented yet"
 #else
-#include <mach/iommu2.h>
+#include <plat/iommu2.h>
 #endif
 
 /*
diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h
index 10ad05f..10ad05f 100644
--- a/arch/arm/plat-omap/include/mach/iommu2.h
+++ b/arch/arm/plat-omap/include/plat/iommu2.h
diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h
index bdc7ce5..bdc7ce5 100644
--- a/arch/arm/plat-omap/include/mach/iovmm.h
+++ b/arch/arm/plat-omap/include/plat/iovmm.h
diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/plat/irda.h
index 40f6033..40f6033 100644
--- a/arch/arm/plat-omap/include/mach/irda.h
+++ b/arch/arm/plat-omap/include/plat/irda.h
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 28a1650..97d6c50c3 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -86,49 +86,26 @@
 #define INT_1610_SSR_FIFO_0	29
 
 /*
- * OMAP-730 specific IRQ numbers for interrupt handler 1
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
  */
-#define INT_730_IH2_FIQ		0
-#define INT_730_IH2_IRQ		1
-#define INT_730_USB_NON_ISO	2
-#define INT_730_USB_ISO		3
-#define INT_730_ICR		4
-#define INT_730_EAC		5
-#define INT_730_GPIO_BANK1	6
-#define INT_730_GPIO_BANK2	7
-#define INT_730_GPIO_BANK3	8
-#define INT_730_McBSP2TX	10
-#define INT_730_McBSP2RX	11
-#define INT_730_McBSP2RX_OVF	12
-#define INT_730_LCD_LINE	14
-#define INT_730_GSM_PROTECT	15
-#define INT_730_TIMER3		16
-#define INT_730_GPIO_BANK5	17
-#define INT_730_GPIO_BANK6	18
-#define INT_730_SPGIO_WR	29
-
-/*
- * OMAP-850 specific IRQ numbers for interrupt handler 1
- */
-#define INT_850_IH2_FIQ		0
-#define INT_850_IH2_IRQ		1
-#define INT_850_USB_NON_ISO	2
-#define INT_850_USB_ISO		3
-#define INT_850_ICR		4
-#define INT_850_EAC		5
-#define INT_850_GPIO_BANK1	6
-#define INT_850_GPIO_BANK2	7
-#define INT_850_GPIO_BANK3	8
-#define INT_850_McBSP2TX	10
-#define INT_850_McBSP2RX	11
-#define INT_850_McBSP2RX_OVF	12
-#define INT_850_LCD_LINE	14
-#define INT_850_GSM_PROTECT	15
-#define INT_850_TIMER3		16
-#define INT_850_GPIO_BANK5	17
-#define INT_850_GPIO_BANK6	18
-#define INT_850_SPGIO_WR	29
-
+#define INT_7XX_IH2_FIQ		0
+#define INT_7XX_IH2_IRQ		1
+#define INT_7XX_USB_NON_ISO	2
+#define INT_7XX_USB_ISO		3
+#define INT_7XX_ICR		4
+#define INT_7XX_EAC		5
+#define INT_7XX_GPIO_BANK1	6
+#define INT_7XX_GPIO_BANK2	7
+#define INT_7XX_GPIO_BANK3	8
+#define INT_7XX_McBSP2TX	10
+#define INT_7XX_McBSP2RX	11
+#define INT_7XX_McBSP2RX_OVF	12
+#define INT_7XX_LCD_LINE	14
+#define INT_7XX_GSM_PROTECT	15
+#define INT_7XX_TIMER3		16
+#define INT_7XX_GPIO_BANK5	17
+#define INT_7XX_GPIO_BANK6	18
+#define INT_7XX_SPGIO_WR	29
 
 /*
  * IRQ numbers for interrupt handler 2
@@ -206,120 +183,62 @@
 #define INT_1610_SHA1MD5	(91 + IH2_BASE)
 
 /*
- * OMAP-730 specific IRQ numbers for interrupt handler 2
- */
-#define INT_730_HW_ERRORS	(0 + IH2_BASE)
-#define INT_730_NFIQ_PWR_FAIL	(1 + IH2_BASE)
-#define INT_730_CFCD		(2 + IH2_BASE)
-#define INT_730_CFIREQ		(3 + IH2_BASE)
-#define INT_730_I2C		(4 + IH2_BASE)
-#define INT_730_PCC		(5 + IH2_BASE)
-#define INT_730_MPU_EXT_NIRQ	(6 + IH2_BASE)
-#define INT_730_SPI_100K_1	(7 + IH2_BASE)
-#define INT_730_SYREN_SPI	(8 + IH2_BASE)
-#define INT_730_VLYNQ		(9 + IH2_BASE)
-#define INT_730_GPIO_BANK4	(10 + IH2_BASE)
-#define INT_730_McBSP1TX	(11 + IH2_BASE)
-#define INT_730_McBSP1RX	(12 + IH2_BASE)
-#define INT_730_McBSP1RX_OF	(13 + IH2_BASE)
-#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_730_UART_MODEM_1	(15 + IH2_BASE)
-#define INT_730_MCSI		(16 + IH2_BASE)
-#define INT_730_uWireTX		(17 + IH2_BASE)
-#define INT_730_uWireRX		(18 + IH2_BASE)
-#define INT_730_SMC_CD		(19 + IH2_BASE)
-#define INT_730_SMC_IREQ	(20 + IH2_BASE)
-#define INT_730_HDQ_1WIRE	(21 + IH2_BASE)
-#define INT_730_TIMER32K	(22 + IH2_BASE)
-#define INT_730_MMC_SDIO	(23 + IH2_BASE)
-#define INT_730_UPLD		(24 + IH2_BASE)
-#define INT_730_USB_HHC_1	(27 + IH2_BASE)
-#define INT_730_USB_HHC_2	(28 + IH2_BASE)
-#define INT_730_USB_GENI	(29 + IH2_BASE)
-#define INT_730_USB_OTG		(30 + IH2_BASE)
-#define INT_730_CAMERA_IF	(31 + IH2_BASE)
-#define INT_730_RNG		(32 + IH2_BASE)
-#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_730_DBB_RF_EN	(34 + IH2_BASE)
-#define INT_730_MPUIO_KEYPAD	(35 + IH2_BASE)
-#define INT_730_SHA1_MD5	(36 + IH2_BASE)
-#define INT_730_SPI_100K_2	(37 + IH2_BASE)
-#define INT_730_RNG_IDLE	(38 + IH2_BASE)
-#define INT_730_MPUIO		(39 + IH2_BASE)
-#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
-#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_730_LLPC_OE_RISING	(42 + IH2_BASE)
-#define INT_730_LLPC_VSYNC	(43 + IH2_BASE)
-#define INT_730_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_730_DMA_CH6		(53 + IH2_BASE)
-#define INT_730_DMA_CH7		(54 + IH2_BASE)
-#define INT_730_DMA_CH8		(55 + IH2_BASE)
-#define INT_730_DMA_CH9		(56 + IH2_BASE)
-#define INT_730_DMA_CH10	(57 + IH2_BASE)
-#define INT_730_DMA_CH11	(58 + IH2_BASE)
-#define INT_730_DMA_CH12	(59 + IH2_BASE)
-#define INT_730_DMA_CH13	(60 + IH2_BASE)
-#define INT_730_DMA_CH14	(61 + IH2_BASE)
-#define INT_730_DMA_CH15	(62 + IH2_BASE)
-#define INT_730_NAND		(63 + IH2_BASE)
-
-/*
- * OMAP-850 specific IRQ numbers for interrupt handler 2
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
  */
-#define INT_850_HW_ERRORS	(0 + IH2_BASE)
-#define INT_850_NFIQ_PWR_FAIL	(1 + IH2_BASE)
-#define INT_850_CFCD		(2 + IH2_BASE)
-#define INT_850_CFIREQ		(3 + IH2_BASE)
-#define INT_850_I2C		(4 + IH2_BASE)
-#define INT_850_PCC		(5 + IH2_BASE)
-#define INT_850_MPU_EXT_NIRQ	(6 + IH2_BASE)
-#define INT_850_SPI_100K_1	(7 + IH2_BASE)
-#define INT_850_SYREN_SPI	(8 + IH2_BASE)
-#define INT_850_VLYNQ		(9 + IH2_BASE)
-#define INT_850_GPIO_BANK4	(10 + IH2_BASE)
-#define INT_850_McBSP1TX	(11 + IH2_BASE)
-#define INT_850_McBSP1RX	(12 + IH2_BASE)
-#define INT_850_McBSP1RX_OF	(13 + IH2_BASE)
-#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_850_UART_MODEM_1	(15 + IH2_BASE)
-#define INT_850_MCSI		(16 + IH2_BASE)
-#define INT_850_uWireTX		(17 + IH2_BASE)
-#define INT_850_uWireRX		(18 + IH2_BASE)
-#define INT_850_SMC_CD		(19 + IH2_BASE)
-#define INT_850_SMC_IREQ	(20 + IH2_BASE)
-#define INT_850_HDQ_1WIRE	(21 + IH2_BASE)
-#define INT_850_TIMER32K	(22 + IH2_BASE)
-#define INT_850_MMC_SDIO	(23 + IH2_BASE)
-#define INT_850_UPLD		(24 + IH2_BASE)
-#define INT_850_USB_HHC_1	(27 + IH2_BASE)
-#define INT_850_USB_HHC_2	(28 + IH2_BASE)
-#define INT_850_USB_GENI	(29 + IH2_BASE)
-#define INT_850_USB_OTG		(30 + IH2_BASE)
-#define INT_850_CAMERA_IF	(31 + IH2_BASE)
-#define INT_850_RNG		(32 + IH2_BASE)
-#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_850_DBB_RF_EN	(34 + IH2_BASE)
-#define INT_850_MPUIO_KEYPAD	(35 + IH2_BASE)
-#define INT_850_SHA1_MD5	(36 + IH2_BASE)
-#define INT_850_SPI_100K_2	(37 + IH2_BASE)
-#define INT_850_RNG_IDLE	(38 + IH2_BASE)
-#define INT_850_MPUIO		(39 + IH2_BASE)
-#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
-#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_850_LLPC_OE_RISING	(42 + IH2_BASE)
-#define INT_850_LLPC_VSYNC	(43 + IH2_BASE)
-#define INT_850_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_850_DMA_CH6		(53 + IH2_BASE)
-#define INT_850_DMA_CH7		(54 + IH2_BASE)
-#define INT_850_DMA_CH8		(55 + IH2_BASE)
-#define INT_850_DMA_CH9		(56 + IH2_BASE)
-#define INT_850_DMA_CH10	(57 + IH2_BASE)
-#define INT_850_DMA_CH11	(58 + IH2_BASE)
-#define INT_850_DMA_CH12	(59 + IH2_BASE)
-#define INT_850_DMA_CH13	(60 + IH2_BASE)
-#define INT_850_DMA_CH14	(61 + IH2_BASE)
-#define INT_850_DMA_CH15	(62 + IH2_BASE)
-#define INT_850_NAND		(63 + IH2_BASE)
+#define INT_7XX_HW_ERRORS	(0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_7XX_CFCD		(2 + IH2_BASE)
+#define INT_7XX_CFIREQ		(3 + IH2_BASE)
+#define INT_7XX_I2C		(4 + IH2_BASE)
+#define INT_7XX_PCC		(5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1	(7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI	(8 + IH2_BASE)
+#define INT_7XX_VLYNQ		(9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_7XX_McBSP1TX	(11 + IH2_BASE)
+#define INT_7XX_McBSP1RX	(12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_7XX_MCSI		(16 + IH2_BASE)
+#define INT_7XX_uWireTX		(17 + IH2_BASE)
+#define INT_7XX_uWireRX		(18 + IH2_BASE)
+#define INT_7XX_SMC_CD		(19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ	(20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_7XX_TIMER32K	(22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO	(23 + IH2_BASE)
+#define INT_7XX_UPLD		(24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1	(27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2	(28 + IH2_BASE)
+#define INT_7XX_USB_GENI	(29 + IH2_BASE)
+#define INT_7XX_USB_OTG		(30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF	(31 + IH2_BASE)
+#define INT_7XX_RNG		(32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5	(36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2	(37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE	(38 + IH2_BASE)
+#define INT_7XX_MPUIO		(39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_7XX_DMA_CH6		(53 + IH2_BASE)
+#define INT_7XX_DMA_CH7		(54 + IH2_BASE)
+#define INT_7XX_DMA_CH8		(55 + IH2_BASE)
+#define INT_7XX_DMA_CH9		(56 + IH2_BASE)
+#define INT_7XX_DMA_CH10	(57 + IH2_BASE)
+#define INT_7XX_DMA_CH11	(58 + IH2_BASE)
+#define INT_7XX_DMA_CH12	(59 + IH2_BASE)
+#define INT_7XX_DMA_CH13	(60 + IH2_BASE)
+#define INT_7XX_DMA_CH14	(61 + IH2_BASE)
+#define INT_7XX_DMA_CH15	(62 + IH2_BASE)
+#define INT_7XX_NAND		(63 + IH2_BASE)
 
 #define INT_24XX_SYS_NIRQ	7
 #define INT_24XX_SDMA_IRQ0	12
@@ -553,14 +472,33 @@
 #endif
 #define TWL4030_GPIO_IRQ_END	(TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
 
+#define	TWL6030_IRQ_BASE	(OMAP_FPGA_IRQ_END)
+#ifdef CONFIG_TWL4030_CORE
+#define	TWL6030_BASE_NR_IRQS	20
+#else
+#define	TWL6030_BASE_NR_IRQS	0
+#endif
+#define TWL6030_IRQ_END		(TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS)
+
 /* Total number of interrupts depends on the enabled blocks above */
-#define NR_IRQS			TWL4030_GPIO_IRQ_END
+#if (TWL4030_GPIO_IRQ_END > TWL6030_IRQ_END)
+#define TWL_IRQ_END 		TWL4030_GPIO_IRQ_END
+#else
+#define TWL_IRQ_END		TWL6030_IRQ_END
+#endif
+
+#define NR_IRQS			TWL_IRQ_END
 
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
 
+#define INTCPS_NR_MIR_REGS	3
+#define INTCPS_NR_IRQS		96
+
 #ifndef __ASSEMBLY__
 extern void omap_init_irq(void);
 extern int omap_irq_pending(void);
+void omap_intc_save_context(void);
+void omap_intc_restore_context(void);
 #endif
 
 #include <mach/hardware.h>
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h
index 3ae52cc..3ae52cc 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/plat/keypad.h
diff --git a/arch/arm/plat-omap/include/mach/lcd_mipid.h b/arch/arm/plat-omap/include/plat/lcd_mipid.h
index 8e52c65..8e52c65 100644
--- a/arch/arm/plat-omap/include/mach/lcd_mipid.h
+++ b/arch/arm/plat-omap/include/plat/lcd_mipid.h
diff --git a/arch/arm/plat-omap/include/mach/led.h b/arch/arm/plat-omap/include/plat/led.h
index 25e451e..25e451e 100644
--- a/arch/arm/plat-omap/include/mach/led.h
+++ b/arch/arm/plat-omap/include/plat/led.h
diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h
index b7a6991..729166b 100644
--- a/arch/arm/plat-omap/include/mach/mailbox.h
+++ b/arch/arm/plat-omap/include/plat/mailbox.h
@@ -6,9 +6,9 @@
 #include <linux/wait.h>
 #include <linux/workqueue.h>
 #include <linux/blkdev.h>
+#include <linux/interrupt.h>
 
 typedef u32 mbox_msg_t;
-typedef void (mbox_receiver_t)(mbox_msg_t msg);
 struct omap_mbox;
 
 typedef int __bitwise omap_mbox_irq_t;
@@ -29,8 +29,10 @@ struct omap_mbox_ops {
 	int		(*fifo_empty)(struct omap_mbox *mbox);
 	int		(*fifo_full)(struct omap_mbox *mbox);
 	/* irq */
-	void		(*enable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
-	void		(*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+	void		(*enable_irq)(struct omap_mbox *mbox,
+						omap_mbox_irq_t irq);
+	void		(*disable_irq)(struct omap_mbox *mbox,
+						omap_mbox_irq_t irq);
 	void		(*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
 	int		(*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
 	/* ctx */
@@ -42,6 +44,7 @@ struct omap_mbox_queue {
 	spinlock_t		lock;
 	struct request_queue	*queue;
 	struct work_struct	work;
+	struct tasklet_struct	tasklet;
 	int	(*callback)(void *);
 	struct omap_mbox	*mbox;
 };
@@ -64,7 +67,7 @@ struct omap_mbox {
 	void			(*err_notify)(void);
 };
 
-int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg, void *);
+int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
 void omap_mbox_init_seq(struct omap_mbox *);
 
 struct omap_mbox *omap_mbox_get(const char *);
@@ -93,4 +96,16 @@ static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox)
 	mbox->ops->restore_ctx(mbox);
 }
 
+static inline void omap_mbox_enable_irq(struct omap_mbox *mbox,
+					omap_mbox_irq_t irq)
+{
+	mbox->ops->enable_irq(mbox, irq);
+}
+
+static inline void omap_mbox_disable_irq(struct omap_mbox *mbox,
+					 omap_mbox_irq_t irq)
+{
+	mbox->ops->disable_irq(mbox, irq);
+}
+
 #endif /* MAILBOX_H */
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index e0d6eca..4f22e5b 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -28,10 +28,10 @@
 #include <linux/spinlock.h>
 
 #include <mach/hardware.h>
-#include <mach/clock.h>
+#include <plat/clock.h>
 
-#define OMAP730_MCBSP1_BASE	0xfffb1000
-#define OMAP730_MCBSP2_BASE	0xfffb1800
+#define OMAP7XX_MCBSP1_BASE	0xfffb1000
+#define OMAP7XX_MCBSP2_BASE	0xfffb1800
 
 #define OMAP1510_MCBSP1_BASE	0xe1011800
 #define OMAP1510_MCBSP2_BASE	0xfffb1000
@@ -58,7 +58,7 @@
 #define OMAP44XX_MCBSP3_BASE	0x49026000
 #define OMAP44XX_MCBSP4_BASE	0x48074000
 
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
 #define OMAP_MCBSP_REG_DRR1	0x02
diff --git a/arch/arm/plat-omap/include/mach/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h
index 1254e49..1254e49 100644
--- a/arch/arm/plat-omap/include/mach/mcspi.h
+++ b/arch/arm/plat-omap/include/plat/mcspi.h
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/plat/memory.h
index 9ad41dc..3325f7b 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/plat/memory.h
@@ -68,6 +68,13 @@
 		__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
 	   __dma; })
 
+#define __arch_dma_to_page(dev, addr)	\
+	({ dma_addr_t __dma = addr;				\
+	   if (is_lbus_device(dev))				\
+		__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;	\
+	   phys_to_page(__dma);					\
+	})
+
 #define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
 						lbus_to_virt(addr) : \
 						__phys_to_virt(addr)); })
diff --git a/arch/arm/plat-omap/include/mach/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h
index 3122bf6..3122bf6 100644
--- a/arch/arm/plat-omap/include/mach/menelaus.h
+++ b/arch/arm/plat-omap/include/plat/menelaus.h
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 7229b95..2993713 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -15,7 +15,7 @@
 #include <linux/device.h>
 #include <linux/mmc/host.h>
 
-#include <mach/board.h>
+#include <plat/board.h>
 
 #define OMAP15XX_NR_MMC		1
 #define OMAP16XX_NR_MMC		2
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index 0f49d2d..8f069cc 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -51,23 +51,13 @@
 					.pu_pd_reg = PU_PD_SEL_##reg, \
 					.pu_pd_val = status,
 
-#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
-					.mux_reg = OMAP730_IO_CONF_##reg, \
+#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
 					.mask_offset = mode_offset, \
 					.mask = mode,
 
-#define PULL_REG_730(reg, bit, status)	.pull_name = "OMAP730_IO_CONF_"#reg, \
-					.pull_reg = OMAP730_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \
-					.mux_reg = OMAP850_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_850(reg, bit, status)	.pull_name = "OMAP850_IO_CONF_"#reg, \
-					.pull_reg = OMAP850_IO_CONF_##reg, \
+#define PULL_REG_7XX(reg, bit, status)	.pull_name = "OMAP7XX_IO_CONF_"#reg, \
+					.pull_reg = OMAP7XX_IO_CONF_##reg, \
 					.pull_bit = bit, \
 					.pull_val = status,
 
@@ -84,21 +74,12 @@
 #define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
 					.pu_pd_val = status,
 
-#define MUX_REG_730(reg, mode_offset, mode) \
-					.mux_reg = OMAP730_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_730(reg, bit, status)	.pull_reg = OMAP730_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define MUX_REG_850(reg, mode_offset, mode) \
-					.mux_reg = OMAP850_IO_CONF_##reg, \
+#define MUX_REG_7XX(reg, mode_offset, mode) \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
 					.mask_offset = mode_offset, \
 					.mask = mode,
 
-#define PULL_REG_850(reg, bit, status)	.pull_reg = OMAP850_IO_CONF_##reg, \
+#define PULL_REG_7XX(reg, bit, status)	.pull_reg = OMAP7XX_IO_CONF_##reg, \
 					.pull_bit = bit, \
 					.pull_val = status,
 
@@ -118,32 +99,21 @@
 
 /*
  * OMAP730/850 has a slightly different config for the pin mux.
- * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and
  *   not the FUNC_MUX_CTRL_x regs from hardware.h
  * - for pull-up/down, only has one enable bit which is is in the same register
  *   as mux config
  */
-#define MUX_CFG_730(desc, mux_reg, mode_offset, mode,	\
-		   pull_bit, pull_status, debug_status)\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG_730(mux_reg, mode_offset, mode)		\
-	PULL_REG_730(mux_reg, pull_bit, pull_status)	\
-	PU_PD_REG(NA, 0)		\
-},
-
-#define MUX_CFG_850(desc, mux_reg, mode_offset, mode,	\
+#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,	\
 		   pull_bit, pull_status, debug_status)\
 {							\
 	.name =	 desc,					\
 	.debug = debug_status,				\
-	MUX_REG_850(mux_reg, mode_offset, mode)		\
-	PULL_REG_850(mux_reg, pull_bit, pull_status)	\
+	MUX_REG_7XX(mux_reg, mode_offset, mode)		\
+	PULL_REG_7XX(mux_reg, pull_bit, pull_status)	\
 	PU_PD_REG(NA, 0)		\
 },
 
-
 #define MUX_CFG_24XX(desc, reg_offset, mode,			\
 				pull_en, pull_mode, dbg)	\
 {								\
@@ -160,58 +130,11 @@
 #define OMAP2_PULL_UP		(1 << 4)
 #define OMAP2_ALTELECTRICALSEL	(1 << 5)
 
-/* 34xx specific mux bit defines */
-#define OMAP3_INPUT_EN		(1 << 8)
-#define OMAP3_OFF_EN		(1 << 9)
-#define OMAP3_OFFOUT_EN		(1 << 10)
-#define OMAP3_OFFOUT_VAL	(1 << 11)
-#define OMAP3_OFF_PULL_EN	(1 << 12)
-#define OMAP3_OFF_PULL_UP	(1 << 13)
-#define OMAP3_WAKEUP_EN		(1 << 14)
-
-/* 34xx mux mode options for each pin. See TRM for options */
-#define	OMAP34XX_MUX_MODE0	0
-#define	OMAP34XX_MUX_MODE1	1
-#define	OMAP34XX_MUX_MODE2	2
-#define	OMAP34XX_MUX_MODE3	3
-#define	OMAP34XX_MUX_MODE4	4
-#define	OMAP34XX_MUX_MODE5	5
-#define	OMAP34XX_MUX_MODE6	6
-#define	OMAP34XX_MUX_MODE7	7
-
-/* 34xx active pin states */
-#define OMAP34XX_PIN_OUTPUT		0
-#define OMAP34XX_PIN_INPUT		OMAP3_INPUT_EN
-#define OMAP34XX_PIN_INPUT_PULLUP	(OMAP2_PULL_ENA | OMAP3_INPUT_EN \
-						| OMAP2_PULL_UP)
-#define OMAP34XX_PIN_INPUT_PULLDOWN	(OMAP2_PULL_ENA | OMAP3_INPUT_EN)
-
-/* 34xx off mode states */
-#define OMAP34XX_PIN_OFF_NONE           0
-#define OMAP34XX_PIN_OFF_OUTPUT_HIGH	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
-						| OMAP3_OFFOUT_VAL)
-#define OMAP34XX_PIN_OFF_OUTPUT_LOW	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
-#define OMAP34XX_PIN_OFF_INPUT_PULLUP	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
-						| OMAP3_OFF_PULL_UP)
-#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
-#define OMAP34XX_PIN_OFF_WAKEUPENABLE	OMAP3_WAKEUP_EN
-
-#define MUX_CFG_34XX(desc, reg_offset, mux_value) {		\
-	.name		= desc,					\
-	.debug		= 0,					\
-	.mux_reg	= reg_offset,				\
-	.mux_val	= mux_value				\
-},
-
 struct pin_config {
 	char 			*name;
 	const unsigned int 	mux_reg;
 	unsigned char		debug;
 
-#if	defined(CONFIG_ARCH_OMAP34XX)
-	u16			mux_val; /* Wake-up, off mode, pull, mux mode */
-#endif
-
 #if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
 	const unsigned char mask_offset;
 	const unsigned char mask;
@@ -232,45 +155,36 @@ struct pin_config {
 
 };
 
-enum omap730_index {
+enum omap7xx_index {
 	/* OMAP 730 keyboard */
-	E2_730_KBR0,
-	J7_730_KBR1,
-	E1_730_KBR2,
-	F3_730_KBR3,
-	D2_730_KBR4,
-	C2_730_KBC0,
-	D3_730_KBC1,
-	E4_730_KBC2,
-	F4_730_KBC3,
-	E3_730_KBC4,
-
-	/* USB */
-	AA17_730_USB_DM,
-	W16_730_USB_PU_EN,
-	W17_730_USB_VBUSI,
-};
-
-enum omap850_index {
-	/* OMAP 850 keyboard */
-	E2_850_KBR0,
-	J7_850_KBR1,
-	E1_850_KBR2,
-	F3_850_KBR3,
-	D2_850_KBR4,
-	C2_850_KBC0,
-	D3_850_KBC1,
-	E4_850_KBC2,
-	F4_850_KBC3,
-	E3_850_KBC4,
+	E2_7XX_KBR0,
+	J7_7XX_KBR1,
+	E1_7XX_KBR2,
+	F3_7XX_KBR3,
+	D2_7XX_KBR4,
+	C2_7XX_KBC0,
+	D3_7XX_KBC1,
+	E4_7XX_KBC2,
+	F4_7XX_KBC3,
+	E3_7XX_KBC4,
 
 	/* USB */
-	AA17_850_USB_DM,
-	W16_850_USB_PU_EN,
-	W17_850_USB_VBUSI,
+	AA17_7XX_USB_DM,
+	W16_7XX_USB_PU_EN,
+	W17_7XX_USB_VBUSI,
+	W18_7XX_USB_DMCK_OUT,
+	W19_7XX_USB_DCRST,
+
+	/* MMC */
+	MMC_7XX_CMD,
+	MMC_7XX_CLK,
+	MMC_7XX_DAT0,
+
+	/* I2C */
+	I2C_7XX_SCL,
+	I2C_7XX_SDA,
 };
 
-
 enum omap1xxx_index {
 	/* UART1 (BT_UART_GATING)*/
 	UART1_TX = 0,
@@ -726,172 +640,6 @@ enum omap24xx_index {
 
 };
 
-enum omap34xx_index {
-	/* 34xx I2C */
-	K21_34XX_I2C1_SCL,
-	J21_34XX_I2C1_SDA,
-	AF15_34XX_I2C2_SCL,
-	AE15_34XX_I2C2_SDA,
-	AF14_34XX_I2C3_SCL,
-	AG14_34XX_I2C3_SDA,
-	AD26_34XX_I2C4_SCL,
-	AE26_34XX_I2C4_SDA,
-
-	/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
-	Y8_3430_USB1HS_PHY_CLK,
-	Y9_3430_USB1HS_PHY_STP,
-	AA14_3430_USB1HS_PHY_DIR,
-	AA11_3430_USB1HS_PHY_NXT,
-	W13_3430_USB1HS_PHY_DATA0,
-	W12_3430_USB1HS_PHY_DATA1,
-	W11_3430_USB1HS_PHY_DATA2,
-	Y11_3430_USB1HS_PHY_DATA3,
-	W9_3430_USB1HS_PHY_DATA4,
-	Y12_3430_USB1HS_PHY_DATA5,
-	W8_3430_USB1HS_PHY_DATA6,
-	Y13_3430_USB1HS_PHY_DATA7,
-
-	/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
-	AA8_3430_USB2HS_PHY_CLK,
-	AA10_3430_USB2HS_PHY_STP,
-	AA9_3430_USB2HS_PHY_DIR,
-	AB11_3430_USB2HS_PHY_NXT,
-	AB10_3430_USB2HS_PHY_DATA0,
-	AB9_3430_USB2HS_PHY_DATA1,
-	W3_3430_USB2HS_PHY_DATA2,
-	T4_3430_USB2HS_PHY_DATA3,
-	T3_3430_USB2HS_PHY_DATA4,
-	R3_3430_USB2HS_PHY_DATA5,
-	R4_3430_USB2HS_PHY_DATA6,
-	T2_3430_USB2HS_PHY_DATA7,
-
-
-	/* TLL - HSUSB: 12-pin TLL Port 1*/
-	Y8_3430_USB1HS_TLL_CLK,
-	Y9_3430_USB1HS_TLL_STP,
-	AA14_3430_USB1HS_TLL_DIR,
-	AA11_3430_USB1HS_TLL_NXT,
-	W13_3430_USB1HS_TLL_DATA0,
-	W12_3430_USB1HS_TLL_DATA1,
-	W11_3430_USB1HS_TLL_DATA2,
-	Y11_3430_USB1HS_TLL_DATA3,
-	W9_3430_USB1HS_TLL_DATA4,
-	Y12_3430_USB1HS_TLL_DATA5,
-	W8_3430_USB1HS_TLL_DATA6,
-	Y13_3430_USB1HS_TLL_DATA7,
-
-	/* TLL - HSUSB: 12-pin TLL Port 2*/
-	AA8_3430_USB2HS_TLL_CLK,
-	AA10_3430_USB2HS_TLL_STP,
-	AA9_3430_USB2HS_TLL_DIR,
-	AB11_3430_USB2HS_TLL_NXT,
-	AB10_3430_USB2HS_TLL_DATA0,
-	AB9_3430_USB2HS_TLL_DATA1,
-	W3_3430_USB2HS_TLL_DATA2,
-	T4_3430_USB2HS_TLL_DATA3,
-	T3_3430_USB2HS_TLL_DATA4,
-	R3_3430_USB2HS_TLL_DATA5,
-	R4_3430_USB2HS_TLL_DATA6,
-	T2_3430_USB2HS_TLL_DATA7,
-
-	/* TLL - HSUSB: 12-pin TLL Port 3*/
-	AA6_3430_USB3HS_TLL_CLK,
-	AB3_3430_USB3HS_TLL_STP,
-	AA3_3430_USB3HS_TLL_DIR,
-	Y3_3430_USB3HS_TLL_NXT,
-	AA5_3430_USB3HS_TLL_DATA0,
-	Y4_3430_USB3HS_TLL_DATA1,
-	Y5_3430_USB3HS_TLL_DATA2,
-	W5_3430_USB3HS_TLL_DATA3,
-	AB12_3430_USB3HS_TLL_DATA4,
-	AB13_3430_USB3HS_TLL_DATA5,
-	AA13_3430_USB3HS_TLL_DATA6,
-	AA12_3430_USB3HS_TLL_DATA7,
-
-	/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
-	AF10_3430_USB1FS_PHY_MM1_RXDP,
-	AG9_3430_USB1FS_PHY_MM1_RXDM,
-	W13_3430_USB1FS_PHY_MM1_RXRCV,
-	W12_3430_USB1FS_PHY_MM1_TXSE0,
-	W11_3430_USB1FS_PHY_MM1_TXDAT,
-	Y11_3430_USB1FS_PHY_MM1_TXEN_N,
-
-	/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
-	AF7_3430_USB2FS_PHY_MM2_RXDP,
-	AH7_3430_USB2FS_PHY_MM2_RXDM,
-	AB10_3430_USB2FS_PHY_MM2_RXRCV,
-	AB9_3430_USB2FS_PHY_MM2_TXSE0,
-	W3_3430_USB2FS_PHY_MM2_TXDAT,
-	T4_3430_USB2FS_PHY_MM2_TXEN_N,
-
-	/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
-	AH3_3430_USB3FS_PHY_MM3_RXDP,
-	AE3_3430_USB3FS_PHY_MM3_RXDM,
-	AD1_3430_USB3FS_PHY_MM3_RXRCV,
-	AE1_3430_USB3FS_PHY_MM3_TXSE0,
-	AD2_3430_USB3FS_PHY_MM3_TXDAT,
-	AC1_3430_USB3FS_PHY_MM3_TXEN_N,
-
-	/* 34xx GPIO
-	 *  - normally these are bidirectional, no internal pullup/pulldown
-	 *  - "_UP" suffix (GPIO3_UP) if internal pullup is configured
-	 *  - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
-	 *  - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
-	 */
-	AF26_34XX_GPIO0,
-	AF22_34XX_GPIO9,
-	AG9_34XX_GPIO23,
-	AH8_34XX_GPIO29,
-	U8_34XX_GPIO54_OUT,
-	U8_34XX_GPIO54_DOWN,
-	L8_34XX_GPIO63,
-	G25_34XX_GPIO86_OUT,
-	AG4_34XX_GPIO134_OUT,
-	AF4_34XX_GPIO135_OUT,
-	AE4_34XX_GPIO136_OUT,
-	AF6_34XX_GPIO140_UP,
-	AE6_34XX_GPIO141,
-	AF5_34XX_GPIO142,
-	AE5_34XX_GPIO143,
-	H19_34XX_GPIO164_OUT,
-	J25_34XX_GPIO170,
-
-	/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
-	H16_34XX_SDRC_CKE0,
-	H17_34XX_SDRC_CKE1,
-
-	/* MMC1 */
-	N28_3430_MMC1_CLK,
-	M27_3430_MMC1_CMD,
-	N27_3430_MMC1_DAT0,
-	N26_3430_MMC1_DAT1,
-	N25_3430_MMC1_DAT2,
-	P28_3430_MMC1_DAT3,
-	P27_3430_MMC1_DAT4,
-	P26_3430_MMC1_DAT5,
-	R27_3430_MMC1_DAT6,
-	R25_3430_MMC1_DAT7,
-
-	/* MMC2 */
-	AE2_3430_MMC2_CLK,
-	AG5_3430_MMC2_CMD,
-	AH5_3430_MMC2_DAT0,
-	AH4_3430_MMC2_DAT1,
-	AG4_3430_MMC2_DAT2,
-	AF4_3430_MMC2_DAT3,
-
-	/* MMC3 */
-	AF10_3430_MMC3_CLK,
-	AC3_3430_MMC3_CMD,
-	AE11_3430_MMC3_DAT0,
-	AH9_3430_MMC3_DAT1,
-	AF13_3430_MMC3_DAT2,
-	AF13_3430_MMC3_DAT3,
-
-	/* SYS_NIRQ T2 INT1 */
-	AF26_34XX_SYS_NIRQ,
-};
-
 struct omap_mux_cfg {
 	struct pin_config	*pins;
 	unsigned long		size;
@@ -901,14 +649,14 @@ struct omap_mux_cfg {
 #ifdef	CONFIG_OMAP_MUX
 /* setup pin muxing in Linux */
 extern int omap1_mux_init(void);
-extern int omap2_mux_init(void);
 extern int omap_mux_register(struct omap_mux_cfg *);
 extern int omap_cfg_reg(unsigned long reg_cfg);
 #else
 /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
 static inline int omap1_mux_init(void) { return 0; }
-static inline int omap2_mux_init(void) { return 0; }
 static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
 #endif
 
+extern int omap2_mux_init(void);
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index 631a7be..631a7be 100644
--- a/arch/arm/plat-omap/include/mach/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
diff --git a/arch/arm/plat-omap/include/mach/omap-alsa.h b/arch/arm/plat-omap/include/plat/omap-alsa.h
index bdf30a0..b53055b 100644
--- a/arch/arm/plat-omap/include/mach/omap-alsa.h
+++ b/arch/arm/plat-omap/include/plat/omap-alsa.h
@@ -40,10 +40,10 @@
 #ifndef __OMAP_ALSA_H
 #define __OMAP_ALSA_H
 
-#include <mach/dma.h>
+#include <plat/dma.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
-#include <mach/mcbsp.h>
+#include <plat/mcbsp.h>
 #include <linux/platform_device.h>
 
 #define DMA_BUF_SIZE	(1024 * 8)
diff --git a/arch/arm/plat-omap/include/mach/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
index 3ee41d7..3ee41d7 100644
--- a/arch/arm/plat-omap/include/mach/omap-pm.h
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/plat/omap1510.h
index d240046..d240046 100644
--- a/arch/arm/plat-omap/include/mach/omap1510.h
+++ b/arch/arm/plat-omap/include/plat/omap1510.h
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h
index 0e69b50..7560b4d 100644
--- a/arch/arm/plat-omap/include/mach/omap16xx.h
+++ b/arch/arm/plat-omap/include/plat/omap16xx.h
@@ -124,7 +124,7 @@
 #define TIPB_SWITCH_BASE		 (0xfffbc800)
 #define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
 
-/* UART3 Registers Maping through MPU bus */
+/* UART3 Registers Mapping through MPU bus */
 #define UART3_RHR               (OMAP_UART3_BASE + 0)
 #define UART3_THR               (OMAP_UART3_BASE + 0)
 #define UART3_DLL               (OMAP_UART3_BASE + 0)
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h
index 696edfc..696edfc 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/plat/omap24xx.h
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h
index f8d186a..077f059 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/plat/omap34xx.h
@@ -72,16 +72,15 @@
 #define OMAP3430_ISP_CSI2A_END		(OMAP3430_ISP_CSI2A_BASE   + 0x16F)
 #define OMAP3430_ISP_CSI2PHY_END	(OMAP3430_ISP_CSI2PHY_BASE + 0x007)
 
-#define OMAP34XX_IVA_INTC_BASE	0x40000000
 #define OMAP34XX_HSUSB_OTG_BASE	(L4_34XX_BASE + 0xAB000)
-#define OMAP34XX_HSUSB_HOST_BASE	(L4_34XX_BASE + 0x64000)
 #define OMAP34XX_USBTLL_BASE	(L4_34XX_BASE + 0x62000)
+#define OMAP34XX_UHH_CONFIG_BASE	(L4_34XX_BASE + 0x64000)
+#define OMAP34XX_OHCI_BASE	(L4_34XX_BASE + 0x64400)
+#define OMAP34XX_EHCI_BASE	(L4_34XX_BASE + 0x64800)
+#define OMAP34XX_SR1_BASE	0x480C9000
+#define OMAP34XX_SR2_BASE	0x480CB000
 
 #define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
 
-#define OMAP34XX_DSP_BASE	0x58000000
-#define OMAP34XX_DSP_MEM_BASE	(OMAP34XX_DSP_BASE + 0x0)
-#define OMAP34XX_DSP_IPI_BASE	(OMAP34XX_DSP_BASE + 0x1000000)
-#define OMAP34XX_DSP_MMU_BASE	(OMAP34XX_DSP_BASE + 0x2000000)
 #endif /* __ASM_ARCH_OMAP34XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h
index b3ba5ac..ef870de 100644
--- a/arch/arm/plat-omap/include/mach/omap44xx.h
+++ b/arch/arm/plat-omap/include/plat/omap44xx.h
@@ -22,9 +22,14 @@
 #define L4_PER_44XX_BASE		0x48000000
 #define L4_EMU_44XX_BASE		0x54000000
 #define L3_44XX_BASE			0x44000000
+#define OMAP44XX_EMIF1_BASE		0x4c000000
+#define OMAP44XX_EMIF2_BASE		0x4d000000
+#define OMAP44XX_DMM_BASE		0x4e000000
 #define OMAP4430_32KSYNCT_BASE		0x4a304000
-#define OMAP4430_CM_BASE		0x4a004000
-#define OMAP4430_PRM_BASE		0x48306000
+#define OMAP4430_CM1_BASE		0x4a004000
+#define OMAP4430_CM_BASE		OMAP4430_CM1_BASE
+#define OMAP4430_CM2_BASE		0x4a008000
+#define OMAP4430_PRM_BASE		0x4a306000
 #define OMAP44XX_GPMC_BASE		0x50000000
 #define OMAP443X_SCM_BASE		0x4a002000
 #define OMAP443X_CTRL_BASE		OMAP443X_SCM_BASE
@@ -33,14 +38,11 @@
 #define IRQ_SIR_IRQ			0x0040
 #define OMAP44XX_GIC_DIST_BASE		0x48241000
 #define OMAP44XX_GIC_CPU_BASE		0x48240100
-#define OMAP44XX_VA_GIC_CPU_BASE	OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
 #define OMAP44XX_SCU_BASE		0x48240000
-#define OMAP44XX_VA_SCU_BASE		OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
 #define OMAP44XX_LOCAL_TWD_BASE		0x48240600
-#define OMAP44XX_VA_LOCAL_TWD_BASE	OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
-#define OMAP44XX_LOCAL_TWD_SIZE		0x00000100
 #define OMAP44XX_WKUPGEN_BASE		0x48281000
-#define OMAP44XX_VA_WKUPGEN_BASE	OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+
+#define OMAP44XX_MAILBOX_BASE		(L4_44XX_BASE + 0xF4000)
 
 #endif /* __ASM_ARCH_OMAP44XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/omap730.h b/arch/arm/plat-omap/include/plat/omap730.h
index 14272bc..14272bc 100644
--- a/arch/arm/plat-omap/include/mach/omap730.h
+++ b/arch/arm/plat-omap/include/plat/omap730.h
diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h
new file mode 100644
index 0000000..53f5241
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap7xx.h
@@ -0,0 +1,104 @@
+/* arch/arm/plat-omap/include/mach/omap7xx.h
+ *
+ * Hardware definitions for TI OMAP7XX processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
+ * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP7XX_H
+#define __ASM_ARCH_OMAP7XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP7XX_DSP_BASE	0xE0000000
+#define OMAP7XX_DSP_SIZE	0x50000
+#define OMAP7XX_DSP_START	0xE0000000
+
+#define OMAP7XX_DSPREG_BASE	0xE1000000
+#define OMAP7XX_DSPREG_SIZE	SZ_128K
+#define OMAP7XX_DSPREG_START	0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_CONFIG_BASE	0xfffe1000
+#define OMAP7XX_IO_CONF_0	0xfffe1070
+#define OMAP7XX_IO_CONF_1	0xfffe1074
+#define OMAP7XX_IO_CONF_2	0xfffe1078
+#define OMAP7XX_IO_CONF_3	0xfffe107c
+#define OMAP7XX_IO_CONF_4	0xfffe1080
+#define OMAP7XX_IO_CONF_5	0xfffe1084
+#define OMAP7XX_IO_CONF_6	0xfffe1088
+#define OMAP7XX_IO_CONF_7	0xfffe108c
+#define OMAP7XX_IO_CONF_8	0xfffe1090
+#define OMAP7XX_IO_CONF_9	0xfffe1094
+#define OMAP7XX_IO_CONF_10	0xfffe1098
+#define OMAP7XX_IO_CONF_11	0xfffe109c
+#define OMAP7XX_IO_CONF_12	0xfffe10a0
+#define OMAP7XX_IO_CONF_13	0xfffe10a4
+
+#define OMAP7XX_MODE_1		0xfffe1010
+#define OMAP7XX_MODE_2		0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP7XX_MODE2_OFFSET	0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_FLASH_CFG_0	0xfffecc10
+#define OMAP7XX_FLASH_ACFG_0	0xfffecc50
+#define OMAP7XX_FLASH_CFG_1	0xfffecc14
+#define OMAP7XX_FLASH_ACFG_1	0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_ICR_BASE	0xfffbb800
+#define OMAP7XX_DSP_M_CTL	0xfffbb804
+#define OMAP7XX_DSP_MMU_BASE	0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_PCC_UPLD_CTRL_BASE	(0xfffe0900)
+#define OMAP7XX_PCC_UPLD_CTRL		(OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP7XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap850.h b/arch/arm/plat-omap/include/plat/omap850.h
index c33f679..c33f679 100644
--- a/arch/arm/plat-omap/include/mach/omap850.h
+++ b/arch/arm/plat-omap/include/plat/omap850.h
diff --git a/arch/arm/plat-omap/include/mach/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index bd0e136..dc1fac1 100644
--- a/arch/arm/plat-omap/include/mach/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -34,7 +34,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 
 /* omap_device._state values */
 #define OMAP_DEVICE_STATE_UNKNOWN	0
@@ -50,8 +50,8 @@
  * @pm_lats: ptr to an omap_device_pm_latency table
  * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
  * @pm_lat_level: array index of the last odpl entry executed - -1 if never
- * @dev_wakeup_lat: dev wakeup latency in microseconds
- * @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM
+ * @dev_wakeup_lat: dev wakeup latency in nanoseconds
+ * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM
  * @_state: one of OMAP_DEVICE_STATE_* (see above)
  * @flags: device flags
  *
@@ -137,5 +137,7 @@ struct omap_device_pm_latency {
 };
 
 
-#endif
+/* Get omap_device pointer from platform_device pointer */
+#define to_omap_device(x) container_of((x), struct omap_device, pdev)
 
+#endif
diff --git a/arch/arm/plat-omap/include/mach/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 1f79c20..007935a 100644
--- a/arch/arm/plat-omap/include/mach/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -35,7 +35,7 @@
 #include <linux/kernel.h>
 #include <linux/ioport.h>
 
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 
 struct omap_device;
 
@@ -50,6 +50,8 @@ struct omap_device;
 #define SYSC_ENAWAKEUP_MASK		(1 << SYSC_ENAWAKEUP_SHIFT)
 #define SYSC_SOFTRESET_SHIFT		1
 #define SYSC_SOFTRESET_MASK		(1 << SYSC_SOFTRESET_SHIFT)
+#define SYSC_AUTOIDLE_SHIFT		0
+#define SYSC_AUTOIDLE_MASK		(1 << SYSC_AUTOIDLE_SHIFT)
 
 /* OCP SYSSTATUS bit shifts/masks */
 #define SYSS_RESETDONE_SHIFT		0
@@ -62,7 +64,21 @@ struct omap_device;
 
 
 /**
- * struct omap_hwmod_dma_info - MPU address space handled by the hwmod
+ * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
+ * @name: name of the IRQ channel (module local name)
+ * @irq_ch: IRQ channel ID
+ *
+ * @name should be something short, e.g., "tx" or "rx".  It is for use
+ * by platform_get_resource_byname().  It is defined locally to the
+ * hwmod.
+ */
+struct omap_hwmod_irq_info {
+	const char	*name;
+	u16		irq;
+};
+
+/**
+ * struct omap_hwmod_dma_info - DMA channels used by the hwmod
  * @name: name of the DMA channel (module local name)
  * @dma_ch: DMA channel ID
  *
@@ -294,13 +310,17 @@ struct omap_hwmod_omap4_prcm {
  *     SDRAM controller, etc.
  * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
  *     controller, etc.
+ * HWMOD_NO_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
+ *     when module is enabled, rather than the default, which is to
+ *     enable autoidle
  * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
 #define HWMOD_INIT_NO_RESET			(1 << 2)
 #define HWMOD_INIT_NO_IDLE			(1 << 3)
-#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 4)
+#define HWMOD_NO_OCP_AUTOIDLE			(1 << 4)
+#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 5)
 
 /*
  * omap_hwmod._int_flags definitions
@@ -373,7 +393,7 @@ struct omap_hwmod_omap4_prcm {
 struct omap_hwmod {
 	const char			*name;
 	struct omap_device		*od;
-	u8				*mpu_irqs;
+	struct omap_hwmod_irq_info	*mpu_irqs;
 	struct omap_hwmod_dma_info	*sdma_chs;
 	union {
 		struct omap_hwmod_omap2_prcm omap2;
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h
index 72f433d..72f433d 100644
--- a/arch/arm/plat-omap/include/mach/onenand.h
+++ b/arch/arm/plat-omap/include/plat/onenand.h
diff --git a/arch/arm/plat-omap/include/mach/param.h b/arch/arm/plat-omap/include/plat/param.h
index 1eb4dc3..1eb4dc3 100644
--- a/arch/arm/plat-omap/include/mach/param.h
+++ b/arch/arm/plat-omap/include/plat/param.h
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h
index fa64614..0b96005 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/plat/powerdomain.h
@@ -19,7 +19,7 @@
 
 #include <asm/atomic.h>
 
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 
 
 /* Powerdomain basic power states */
@@ -28,6 +28,8 @@
 #define PWRDM_POWER_INACTIVE	0x2
 #define PWRDM_POWER_ON		0x3
 
+#define PWRDM_MAX_PWRSTS	4
+
 /* Powerdomain allowable state bitfields */
 #define PWRSTS_OFF_ON		((1 << PWRDM_POWER_OFF) | \
 				 (1 << PWRDM_POWER_ON))
@@ -40,7 +42,10 @@
 
 /* Powerdomain flags */
 #define PWRDM_HAS_HDWR_SAR	(1 << 0) /* hardware save-and-restore support */
-
+#define PWRDM_HAS_MPU_QUIRK	(1 << 1) /* MPU pwr domain has MEM bank 0 bits
+					  * in MEM bank 1 position. This is
+					  * true for OMAP3430
+					  */
 
 /*
  * Number of memory banks that are power-controllable.	On OMAP3430, the
@@ -85,15 +90,15 @@ struct powerdomain {
 	/* Used to represent the OMAP chip types containing this pwrdm */
 	const struct omap_chip_id omap_chip;
 
-	/* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */
-	const u8 dep_bit;
-
 	/* Powerdomains that can be told to wake this powerdomain up */
 	struct pwrdm_dep *wkdep_srcs;
 
 	/* Powerdomains that can be told to keep this pwrdm from inactivity */
 	struct pwrdm_dep *sleepdep_srcs;
 
+	/* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */
+	const u8 dep_bit;
+
 	/* Possible powerdomain power states */
 	const u8 pwrsts;
 
@@ -118,11 +123,11 @@ struct powerdomain {
 	struct list_head node;
 
 	int state;
-	unsigned state_counter[4];
+	unsigned state_counter[PWRDM_MAX_PWRSTS];
 
 #ifdef CONFIG_PM_DEBUG
 	s64 timer;
-	s64 state_timer[4];
+	s64 state_timer[PWRDM_MAX_PWRSTS];
 #endif
 };
 
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
index cda2a70..e63e94e 100644
--- a/arch/arm/plat-omap/include/mach/prcm.h
+++ b/arch/arm/plat-omap/include/plat/prcm.h
@@ -27,9 +27,13 @@ u32 omap_prcm_get_reset_sources(void);
 void omap_prcm_arch_reset(char mode);
 int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
 
-#endif
+#define START_PADCONF_SAVE 0x2
+#define PADCONF_SAVE_DONE  0x1
 
+void omap3_prcm_save_context(void);
+void omap3_prcm_restore_context(void);
 
+#endif
 
 
 
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
index 1c09c78..7b76f50 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/plat/sdrc.h
@@ -44,6 +44,12 @@
 #define SDRC_RFR_CTRL_1		0x0D4
 #define SDRC_MANUAL_1		0x0D8
 
+#define SDRC_POWER_AUTOCOUNT_SHIFT	8
+#define SDRC_POWER_AUTOCOUNT_MASK	(0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
+#define SDRC_POWER_CLKCTRL_SHIFT	4
+#define SDRC_POWER_CLKCTRL_MASK		(0x3 << SDRC_POWER_CLKCTRL_SHIFT)
+#define SDRC_SELF_REFRESH_ON_AUTOCOUNT	(0x2 << SDRC_POWER_CLKCTRL_SHIFT)
+
 /*
  * These values represent the number of memory clock cycles between
  * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
@@ -80,15 +86,18 @@
  */
 
 #define OMAP242X_SMS_REGADDR(reg)					\
-			(void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
 #define OMAP243X_SMS_REGADDR(reg)					\
-			(void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
 #define OMAP343X_SMS_REGADDR(reg)					\
-			(void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
 
 /* SMS register offsets - read/write with sms_{read,write}_reg() */
 
-#define SMS_SYSCONFIG		0x010
+#define SMS_SYSCONFIG			0x010
+#define SMS_ROT_CONTROL(context)	(0x180 + 0x10 * context)
+#define SMS_ROT_SIZE(context)		(0x184 + 0x10 * context)
+#define SMS_ROT_PHYSICAL_BA(context)	(0x188 + 0x10 * context)
 /* REVISIT: fill in other SMS registers here */
 
 
@@ -120,6 +129,12 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 int omap2_sdrc_get_params(unsigned long r,
 			  struct omap_sdrc_params **sdrc_cs0,
 			  struct omap_sdrc_params **sdrc_cs1);
+void omap2_sms_save_context(void);
+void omap2_sms_restore_context(void);
+
+void omap2_sms_write_rot_control(u32 val, unsigned ctx);
+void omap2_sms_write_rot_size(u32 val, unsigned ctx);
+void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx);
 
 #ifdef CONFIG_ARCH_OMAP2
 
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index e249186..f5a4a92 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -20,26 +20,22 @@
 #define OMAP_UART1_BASE		0xfffb0000
 #define OMAP_UART2_BASE		0xfffb0800
 #define OMAP_UART3_BASE		0xfffb9800
-#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP2)
 /* OMAP2 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x4806e000
-#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP3)
 /* OMAP3 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x49020000
-#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP4)
 /* OMAP4 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x48020000
 #define OMAP_UART4_BASE		0x4806e000
-#define OMAP_MAX_NR_PORTS	4
 #endif
 
 #define OMAP1510_BASE_BAUD	(12000000/16)
@@ -57,6 +53,7 @@
 #ifndef __ASSEMBLER__
 extern void __init omap_serial_early_init(void);
 extern void omap_serial_init(void);
+extern void omap_serial_init_port(int port);
 extern int omap_uart_can_sleep(void);
 extern void omap_uart_check_wakeup(void);
 extern void omap_uart_prepare_suspend(void);
diff --git a/arch/arm/plat-omap/include/mach/smp.h b/arch/arm/plat-omap/include/plat/smp.h
index dcaa8fd..8983d54 100644
--- a/arch/arm/plat-omap/include/mach/smp.h
+++ b/arch/arm/plat-omap/include/plat/smp.h
@@ -28,6 +28,8 @@
 
 /* Needed for secondary core boot */
 extern void omap_secondary_startup(void);
+extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
+extern void omap_auxcoreboot_addr(u32 cpu_addr);
 
 /*
  * We use Soft IRQ1 as the IPI
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 8974e3f..16a1b45 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -27,6 +27,7 @@ extern u32 omap3_configure_core_dpll(
 			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
 			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
 			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern void omap3_sram_restore_context(void);
 
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -68,4 +69,10 @@ extern u32 omap3_sram_configure_core_dpll(
 			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
 extern unsigned long omap3_sram_configure_core_dpll_sz;
 
+#ifdef CONFIG_PM
+extern void omap_push_sram_idle(void);
+#else
+static inline void omap_push_sram_idle(void) {}
+#endif /* CONFIG_PM */
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/plat/system.h
index ed8ec74..c58a4ef 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/plat/system.h
@@ -9,7 +9,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 
-#include <mach/prcm.h>
+#include <plat/prcm.h>
 
 #ifndef CONFIG_MACH_VOICEBLUE
 #define voiceblue_reset()		do {} while (0)
diff --git a/arch/arm/plat-omap/include/mach/tc.h b/arch/arm/plat-omap/include/plat/tc.h
index d2fcd78..d2fcd78 100644
--- a/arch/arm/plat-omap/include/mach/tc.h
+++ b/arch/arm/plat-omap/include/plat/tc.h
diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/plat/timer-gp.h
index c88d346..c88d346 100644
--- a/arch/arm/plat-omap/include/mach/timer-gp.h
+++ b/arch/arm/plat-omap/include/plat/timer-gp.h
diff --git a/arch/arm/plat-omap/include/mach/timex.h b/arch/arm/plat-omap/include/plat/timex.h
index 6d35767..6d35767 100644
--- a/arch/arm/plat-omap/include/mach/timex.h
+++ b/arch/arm/plat-omap/include/plat/timex.h
diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 0814c5f..13c305d 100644
--- a/arch/arm/plat-omap/include/mach/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -19,12 +19,13 @@
 
 #include <linux/types.h>
 #include <linux/serial_reg.h>
-#include <mach/serial.h>
+#include <plat/serial.h>
 
 unsigned int system_rev;
 
 #define UART_OMAP_MDR1		0x08	/* mode definition register */
 #define OMAP_ID_730		0x355F
+#define OMAP_ID_850		0x362C
 #define ID_MASK			0x7fff
 #define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
 #define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
@@ -43,8 +44,12 @@ static void putc(int c)
 	uart = (volatile u8 *)(OMAP_UART3_BASE);
 #elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
 	uart = (volatile u8 *)(OMAP_UART2_BASE);
-#else
+#elif defined(CONFIG_OMAP_LL_DEBUG_UART1)
 	uart = (volatile u8 *)(OMAP_UART1_BASE);
+#elif defined(CONFIG_OMAP_LL_DEBUG_NONE)
+	return;
+#else
+	return;
 #endif
 
 #ifdef CONFIG_ARCH_OMAP1
@@ -53,7 +58,7 @@ static void putc(int c)
 		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
 		unsigned int omap_id = omap_get_id();
 
-		if (omap_id == OMAP_ID_730)
+		if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850)
 			shift = 0;
 
 		if (check_port(uart, shift))
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index f337e17..33a500e 100644
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -3,7 +3,22 @@
 #ifndef	__ASM_ARCH_OMAP_USB_H
 #define	__ASM_ARCH_OMAP_USB_H
 
-#include <mach/board.h>
+#include <plat/board.h>
+
+#define OMAP3_HS_USB_PORTS	3
+enum ehci_hcd_omap_mode {
+	EHCI_HCD_OMAP_MODE_UNKNOWN,
+	EHCI_HCD_OMAP_MODE_PHY,
+	EHCI_HCD_OMAP_MODE_TLL,
+};
+
+struct ehci_hcd_omap_platform_data {
+	enum ehci_hcd_omap_mode		port_mode[OMAP3_HS_USB_PORTS];
+	unsigned			phy_reset:1;
+
+	/* have to be valid if phy_reset is true and portx is in phy mode */
+	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
+};
 
 /*-------------------------------------------------------------------------*/
 
@@ -29,6 +44,8 @@
 
 extern void usb_musb_init(void);
 
+extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata);
+
 #endif
 
 void omap_usb_init(struct omap_usb_config *pdata);
diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h
new file mode 100644
index 0000000..edd4987
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/vram.h
@@ -0,0 +1,62 @@
+/*
+ * VRAM manager for OMAP
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAP_VRAM_H__
+#define __OMAP_VRAM_H__
+
+#include <linux/types.h>
+
+#define OMAP_VRAM_MEMTYPE_SDRAM		0
+#define OMAP_VRAM_MEMTYPE_SRAM		1
+#define OMAP_VRAM_MEMTYPE_MAX		1
+
+extern int omap_vram_add_region(unsigned long paddr, size_t size);
+extern int omap_vram_free(unsigned long paddr, size_t size);
+extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr);
+extern int omap_vram_reserve(unsigned long paddr, size_t size);
+extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram,
+		unsigned long *largest_free_block);
+
+#ifdef CONFIG_OMAP2_VRAM
+extern void omap_vram_set_sdram_vram(u32 size, u32 start);
+extern void omap_vram_set_sram_vram(u32 size, u32 start);
+
+extern void omap_vram_reserve_sdram(void);
+extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
+					    unsigned long sram_vstart,
+					    unsigned long sram_size,
+					    unsigned long pstart_avail,
+					    unsigned long size_avail);
+#else
+static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
+static inline void omap_vram_set_sram_vram(u32 size, u32 start) { }
+
+static inline void omap_vram_reserve_sdram(void) { }
+static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
+					    unsigned long sram_vstart,
+					    unsigned long sram_size,
+					    unsigned long pstart_avail,
+					    unsigned long size_avail)
+{
+	return 0;
+}
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h
new file mode 100644
index 0000000..d8a03ce
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/vrfb.h
@@ -0,0 +1,50 @@
+/*
+ * VRFB Rotation Engine
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAP_VRFB_H__
+#define __OMAP_VRFB_H__
+
+#define OMAP_VRFB_LINE_LEN 2048
+
+struct vrfb {
+	u8 context;
+	void __iomem *vaddr[4];
+	unsigned long paddr[4];
+	u16 xres;
+	u16 yres;
+	u16 xoffset;
+	u16 yoffset;
+	u8 bytespp;
+	bool yuv_mode;
+};
+
+extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
+extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
+extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
+		u8 bytespp);
+extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp);
+extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp);
+extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
+		u16 width, u16 height,
+		unsigned bytespp, bool yuv_mode);
+extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot);
+extern void omap_vrfb_restore_context(void);
+
+#endif /* __VRFB_H */
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index b6defa2..11f5d79 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -13,12 +13,12 @@
 #include <linux/io.h>
 #include <linux/mm.h>
 
-#include <mach/omap730.h>
-#include <mach/omap1510.h>
-#include <mach/omap16xx.h>
-#include <mach/omap24xx.h>
-#include <mach/omap34xx.h>
-#include <mach/omap44xx.h>
+#include <plat/omap7xx.h>
+#include <plat/omap1510.h>
+#include <plat/omap16xx.h>
+#include <plat/omap24xx.h>
+#include <plat/omap34xx.h>
+#include <plat/omap44xx.h>
 
 #define BETWEEN(p,st,sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define XLATE(p,pst,vst)	((void __iomem *)((p) - (pst) + (vst)))
@@ -33,13 +33,13 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 		if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
 			return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
 	}
-	if (cpu_is_omap730()) {
-		if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
-			return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START);
+	if (cpu_is_omap7xx()) {
+		if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE))
+			return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START);
 
-		if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE))
-			return XLATE(p, OMAP730_DSPREG_BASE,
-					OMAP730_DSPREG_START);
+		if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE))
+			return XLATE(p, OMAP7XX_DSPREG_BASE,
+					OMAP7XX_DSPREG_START);
 	}
 	if (cpu_is_omap15xx()) {
 		if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))
@@ -114,6 +114,14 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 			return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
 		if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
 			return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
+		if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE))
+			return XLATE(p, OMAP44XX_EMIF1_PHYS,		\
+							OMAP44XX_EMIF1_VIRT);
+		if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE))
+			return XLATE(p, OMAP44XX_EMIF2_PHYS,		\
+							OMAP44XX_EMIF2_VIRT);
+		if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE))
+			return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT);
 		if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
 			return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
 		if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
@@ -142,7 +150,7 @@ u8 omap_readb(u32 pa)
 	if (cpu_class_is_omap1())
 		return __raw_readb(OMAP1_IO_ADDRESS(pa));
 	else
-		return __raw_readb(OMAP2_IO_ADDRESS(pa));
+		return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_readb);
 
@@ -151,7 +159,7 @@ u16 omap_readw(u32 pa)
 	if (cpu_class_is_omap1())
 		return __raw_readw(OMAP1_IO_ADDRESS(pa));
 	else
-		return __raw_readw(OMAP2_IO_ADDRESS(pa));
+		return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_readw);
 
@@ -160,7 +168,7 @@ u32 omap_readl(u32 pa)
 	if (cpu_class_is_omap1())
 		return __raw_readl(OMAP1_IO_ADDRESS(pa));
 	else
-		return __raw_readl(OMAP2_IO_ADDRESS(pa));
+		return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_readl);
 
@@ -169,7 +177,7 @@ void omap_writeb(u8 v, u32 pa)
 	if (cpu_class_is_omap1())
 		__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
 	else
-		__raw_writeb(v, OMAP2_IO_ADDRESS(pa));
+		__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_writeb);
 
@@ -178,7 +186,7 @@ void omap_writew(u16 v, u32 pa)
 	if (cpu_class_is_omap1())
 		__raw_writew(v, OMAP1_IO_ADDRESS(pa));
 	else
-		__raw_writew(v, OMAP2_IO_ADDRESS(pa));
+		__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_writew);
 
@@ -187,6 +195,6 @@ void omap_writel(u32 v, u32 pa)
 	if (cpu_class_is_omap1())
 		__raw_writel(v, OMAP1_IO_ADDRESS(pa));
 	else
-		__raw_writel(v, OMAP2_IO_ADDRESS(pa));
+		__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_writel);
diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c
index c799b3b..afd1c27 100644
--- a/arch/arm/plat-omap/iommu-debug.c
+++ b/arch/arm/plat-omap/iommu-debug.c
@@ -17,8 +17,8 @@
 #include <linux/platform_device.h>
 #include <linux/debugfs.h>
 
-#include <mach/iommu.h>
-#include <mach/iovmm.h>
+#include <plat/iommu.h>
+#include <plat/iovmm.h>
 
 #include "iopgtable.h"
 
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 94584f1..c0ff1e3 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -20,7 +20,7 @@
 
 #include <asm/cacheflush.h>
 
-#include <mach/iommu.h>
+#include <plat/iommu.h>
 
 #include "iopgtable.h"
 
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index dc3fac3..936aef1 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -18,8 +18,8 @@
 #include <asm/cacheflush.h>
 #include <asm/mach/map.h>
 
-#include <mach/iommu.h>
-#include <mach/iovmm.h>
+#include <plat/iommu.h>
+#include <plat/iovmm.h>
 
 #include "iopgtable.h"
 
@@ -392,7 +392,6 @@ static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
 	}
 
 	va_end = _va + PAGE_SIZE * i;
-	flush_cache_vmap((unsigned long)_va, (unsigned long)va_end);
 }
 
 static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
@@ -427,8 +426,6 @@ static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len)
 		len -= bytes;
 	}
 	BUG_ON(len);
-
-	clean_dcache_area(va, len);
 }
 
 static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
@@ -449,7 +446,7 @@ static int map_iovm_area(struct iommu *obj, struct iovm_struct *new,
 	struct scatterlist *sg;
 	u32 da = new->da_start;
 
-	if (!obj || !new || !sgt)
+	if (!obj || !sgt)
 		return -EINVAL;
 
 	BUG_ON(!sgtable_ok(sgt));
@@ -617,7 +614,7 @@ u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
 		 u32 flags)
 {
 	size_t bytes;
-	void *va;
+	void *va = NULL;
 
 	if (!obj || !obj->dev || !sgt)
 		return -EINVAL;
@@ -627,9 +624,11 @@ u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
 		return -EINVAL;
 	bytes = PAGE_ALIGN(bytes);
 
-	va = vmap_sg(sgt);
-	if (IS_ERR(va))
-		return PTR_ERR(va);
+	if (flags & IOVMF_MMIO) {
+		va = vmap_sg(sgt);
+		if (IS_ERR(va))
+			return PTR_ERR(va);
+	}
 
 	flags &= IOVMF_HW_MASK;
 	flags |= IOVMF_DISCONT;
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 40424ed..8e90633 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -26,55 +26,12 @@
 #include <linux/device.h>
 #include <linux/delay.h>
 
-#include <mach/mailbox.h>
-
-static int enable_seq_bit;
-module_param(enable_seq_bit, bool, 0);
-MODULE_PARM_DESC(enable_seq_bit, "Enable sequence bit checking.");
+#include <plat/mailbox.h>
 
 static struct omap_mbox *mboxes;
 static DEFINE_RWLOCK(mboxes_lock);
 
-/*
- * Mailbox sequence bit API
- */
-
-/* seq_rcv should be initialized with any value other than
- * 0 and 1 << 31, to allow either value for the first
- * message.  */
-static inline void mbox_seq_init(struct omap_mbox *mbox)
-{
-	if (!enable_seq_bit)
-		return;
-
-	/* any value other than 0 and 1 << 31 */
-	mbox->seq_rcv = 0xffffffff;
-}
-
-static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
-{
-	if (!enable_seq_bit)
-		return;
-
-	/* add seq_snd to msg */
-	*msg = (*msg & 0x7fffffff) | mbox->seq_snd;
-	/* flip seq_snd */
-	mbox->seq_snd ^= 1 << 31;
-}
-
-static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
-{
-	mbox_msg_t seq;
-
-	if (!enable_seq_bit)
-		return 0;
-
-	seq = msg & (1 << 31);
-	if (seq == mbox->seq_rcv)
-		return -1;
-	mbox->seq_rcv = seq;
-	return 0;
-}
+static int mbox_configured;
 
 /* Mailbox FIFO handle functions */
 static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
@@ -95,14 +52,6 @@ static inline int mbox_fifo_full(struct omap_mbox *mbox)
 }
 
 /* Mailbox IRQ handle functions */
-static inline void enable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	mbox->ops->enable_irq(mbox, irq);
-}
-static inline void disable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	mbox->ops->disable_irq(mbox, irq);
-}
 static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
 {
 	if (mbox->ops->ack_irq)
@@ -113,17 +62,10 @@ static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
 	return mbox->ops->is_irq(mbox, irq);
 }
 
-/* Mailbox Sequence Bit function */
-void omap_mbox_init_seq(struct omap_mbox *mbox)
-{
-	mbox_seq_init(mbox);
-}
-EXPORT_SYMBOL(omap_mbox_init_seq);
-
 /*
  * message sender
  */
-static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void *arg)
+static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
 {
 	int ret = 0, i = 1000;
 
@@ -134,89 +76,49 @@ static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void *arg)
 			return -1;
 		udelay(1);
 	}
-
-	if (arg && mbox->txq->callback) {
-		ret = mbox->txq->callback(arg);
-		if (ret)
-			goto out;
-	}
-
-	mbox_seq_toggle(mbox, &msg);
 	mbox_fifo_write(mbox, msg);
- out:
 	return ret;
 }
 
-struct omap_msg_tx_data {
-	mbox_msg_t	msg;
-	void		*arg;
-};
 
-static void omap_msg_tx_end_io(struct request *rq, int error)
+int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
 {
-	kfree(rq->special);
-	__blk_put_request(rq->q, rq);
-}
 
-int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void* arg)
-{
-	struct omap_msg_tx_data *tx_data;
 	struct request *rq;
 	struct request_queue *q = mbox->txq->queue;
 
-	tx_data = kmalloc(sizeof(*tx_data), GFP_ATOMIC);
-	if (unlikely(!tx_data))
-		return -ENOMEM;
-
 	rq = blk_get_request(q, WRITE, GFP_ATOMIC);
-	if (unlikely(!rq)) {
-		kfree(tx_data);
+	if (unlikely(!rq))
 		return -ENOMEM;
-	}
 
-	tx_data->msg = msg;
-	tx_data->arg = arg;
-	rq->end_io = omap_msg_tx_end_io;
-	blk_insert_request(q, rq, 0, tx_data);
+	blk_insert_request(q, rq, 0, (void *) msg);
+	tasklet_schedule(&mbox->txq->tasklet);
 
-	schedule_work(&mbox->txq->work);
 	return 0;
 }
 EXPORT_SYMBOL(omap_mbox_msg_send);
 
-static void mbox_tx_work(struct work_struct *work)
+static void mbox_tx_tasklet(unsigned long tx_data)
 {
 	int ret;
 	struct request *rq;
-	struct omap_mbox_queue *mq = container_of(work,
-				struct omap_mbox_queue, work);
-	struct omap_mbox *mbox = mq->queue->queuedata;
+	struct omap_mbox *mbox = (struct omap_mbox *)tx_data;
 	struct request_queue *q = mbox->txq->queue;
 
 	while (1) {
-		struct omap_msg_tx_data *tx_data;
 
-		spin_lock(q->queue_lock);
 		rq = blk_fetch_request(q);
-		spin_unlock(q->queue_lock);
 
 		if (!rq)
 			break;
 
-		tx_data = rq->special;
-
-		ret = __mbox_msg_send(mbox, tx_data->msg, tx_data->arg);
+		ret = __mbox_msg_send(mbox, (mbox_msg_t)rq->special);
 		if (ret) {
-			enable_mbox_irq(mbox, IRQ_TX);
-			spin_lock(q->queue_lock);
+			omap_mbox_enable_irq(mbox, IRQ_TX);
 			blk_requeue_request(q, rq);
-			spin_unlock(q->queue_lock);
 			return;
 		}
-
-		spin_lock(q->queue_lock);
-		__blk_end_request_all(rq, 0);
-		spin_unlock(q->queue_lock);
+		blk_end_request_all(rq, 0);
 	}
 }
 
@@ -233,11 +135,6 @@ static void mbox_rx_work(struct work_struct *work)
 	mbox_msg_t msg;
 	unsigned long flags;
 
-	if (mbox->rxq->callback == NULL) {
-		sysfs_notify(&mbox->dev->kobj, NULL, "mbox");
-		return;
-	}
-
 	while (1) {
 		spin_lock_irqsave(q->queue_lock, flags);
 		rq = blk_fetch_request(q);
@@ -254,19 +151,19 @@ static void mbox_rx_work(struct work_struct *work)
 /*
  * Mailbox interrupt handler
  */
-static void mbox_txq_fn(struct request_queue * q)
+static void mbox_txq_fn(struct request_queue *q)
 {
 }
 
-static void mbox_rxq_fn(struct request_queue * q)
+static void mbox_rxq_fn(struct request_queue *q)
 {
 }
 
 static void __mbox_tx_interrupt(struct omap_mbox *mbox)
 {
-	disable_mbox_irq(mbox, IRQ_TX);
+	omap_mbox_disable_irq(mbox, IRQ_TX);
 	ack_mbox_irq(mbox, IRQ_TX);
-	schedule_work(&mbox->txq->work);
+	tasklet_schedule(&mbox->txq->tasklet);
 }
 
 static void __mbox_rx_interrupt(struct omap_mbox *mbox)
@@ -275,8 +172,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 	mbox_msg_t msg;
 	struct request_queue *q = mbox->rxq->queue;
 
-	disable_mbox_irq(mbox, IRQ_RX);
-
 	while (!mbox_fifo_empty(mbox)) {
 		rq = blk_get_request(q, WRITE, GFP_ATOMIC);
 		if (unlikely(!rq))
@@ -284,11 +179,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 
 		msg = mbox_fifo_read(mbox);
 
-		if (unlikely(mbox_seq_test(mbox, msg))) {
-			pr_info("mbox: Illegal seq bit!(%08x)\n", msg);
-			if (mbox->err_notify)
-				mbox->err_notify();
-		}
 
 		blk_insert_request(q, rq, 0, (void *)msg);
 		if (mbox->ops->type == OMAP_MBOX_TYPE1)
@@ -297,7 +187,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 
 	/* no more messages in the fifo. clear IRQ source. */
 	ack_mbox_irq(mbox, IRQ_RX);
-	enable_mbox_irq(mbox, IRQ_RX);
 nomem:
 	schedule_work(&mbox->rxq->work);
 }
@@ -315,76 +204,10 @@ static irqreturn_t mbox_interrupt(int irq, void *p)
 	return IRQ_HANDLED;
 }
 
-/*
- * sysfs files
- */
-static ssize_t
-omap_mbox_write(struct device *dev, struct device_attribute *attr,
-		const char * buf, size_t count)
-{
-	int ret;
-	mbox_msg_t *p = (mbox_msg_t *)buf;
-	struct omap_mbox *mbox = dev_get_drvdata(dev);
-
-	for (; count >= sizeof(mbox_msg_t); count -= sizeof(mbox_msg_t)) {
-		ret = omap_mbox_msg_send(mbox, be32_to_cpu(*p), NULL);
-		if (ret)
-			return -EAGAIN;
-		p++;
-	}
-
-	return (size_t)((char *)p - buf);
-}
-
-static ssize_t
-omap_mbox_read(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	unsigned long flags;
-	struct request *rq;
-	mbox_msg_t *p = (mbox_msg_t *) buf;
-	struct omap_mbox *mbox = dev_get_drvdata(dev);
-	struct request_queue *q = mbox->rxq->queue;
-
-	while (1) {
-		spin_lock_irqsave(q->queue_lock, flags);
-		rq = blk_fetch_request(q);
-		spin_unlock_irqrestore(q->queue_lock, flags);
-
-		if (!rq)
-			break;
-
-		*p = (mbox_msg_t)rq->special;
-
-		blk_end_request_all(rq, 0);
-
-		if (unlikely(mbox_seq_test(mbox, *p))) {
-			pr_info("mbox: Illegal seq bit!(%08x) ignored\n", *p);
-			continue;
-		}
-		p++;
-	}
-
-	pr_debug("%02x %02x %02x %02x\n", buf[0], buf[1], buf[2], buf[3]);
-
-	return (size_t) ((char *)p - buf);
-}
-
-static DEVICE_ATTR(mbox, S_IRUGO | S_IWUSR, omap_mbox_read, omap_mbox_write);
-
-static ssize_t mbox_show(struct class *class, char *buf)
-{
-	return sprintf(buf, "mbox");
-}
-
-static CLASS_ATTR(mbox, S_IRUGO, mbox_show, NULL);
-
-static struct class omap_mbox_class = {
-	.name = "omap-mailbox",
-};
-
 static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
-					request_fn_proc * proc,
-					void (*work) (struct work_struct *))
+					request_fn_proc *proc,
+					void (*work) (struct work_struct *),
+					void (*tasklet)(unsigned long))
 {
 	struct request_queue *q;
 	struct omap_mbox_queue *mq;
@@ -401,8 +224,11 @@ static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
 	q->queuedata = mbox;
 	mq->queue = q;
 
-	INIT_WORK(&mq->work, work);
+	if (work)
+		INIT_WORK(&mq->work, work);
 
+	if (tasklet)
+		tasklet_init(&mq->tasklet, tasklet, (unsigned long)mbox);
 	return mq;
 error:
 	kfree(mq);
@@ -415,18 +241,25 @@ static void mbox_queue_free(struct omap_mbox_queue *q)
 	kfree(q);
 }
 
-static int omap_mbox_init(struct omap_mbox *mbox)
+static int omap_mbox_startup(struct omap_mbox *mbox)
 {
-	int ret;
+	int ret = 0;
 	struct omap_mbox_queue *mq;
 
 	if (likely(mbox->ops->startup)) {
-		ret = mbox->ops->startup(mbox);
-		if (unlikely(ret))
+		write_lock(&mboxes_lock);
+		if (!mbox_configured)
+			ret = mbox->ops->startup(mbox);
+
+		if (unlikely(ret)) {
+			write_unlock(&mboxes_lock);
 			return ret;
+		}
+		mbox_configured++;
+		write_unlock(&mboxes_lock);
 	}
 
-	ret = request_irq(mbox->irq, mbox_interrupt, IRQF_DISABLED,
+	ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED,
 				mbox->name, mbox);
 	if (unlikely(ret)) {
 		printk(KERN_ERR
@@ -434,14 +267,14 @@ static int omap_mbox_init(struct omap_mbox *mbox)
 		goto fail_request_irq;
 	}
 
-	mq = mbox_queue_alloc(mbox, mbox_txq_fn, mbox_tx_work);
+	mq = mbox_queue_alloc(mbox, mbox_txq_fn, NULL, mbox_tx_tasklet);
 	if (!mq) {
 		ret = -ENOMEM;
 		goto fail_alloc_txq;
 	}
 	mbox->txq = mq;
 
-	mq = mbox_queue_alloc(mbox, mbox_rxq_fn, mbox_rx_work);
+	mq = mbox_queue_alloc(mbox, mbox_rxq_fn, mbox_rx_work, NULL);
 	if (!mq) {
 		ret = -ENOMEM;
 		goto fail_alloc_rxq;
@@ -468,8 +301,14 @@ static void omap_mbox_fini(struct omap_mbox *mbox)
 
 	free_irq(mbox->irq, mbox);
 
-	if (unlikely(mbox->ops->shutdown))
-		mbox->ops->shutdown(mbox);
+	if (unlikely(mbox->ops->shutdown)) {
+		write_lock(&mboxes_lock);
+		if (mbox_configured > 0)
+			mbox_configured--;
+		if (!mbox_configured)
+			mbox->ops->shutdown(mbox);
+		write_unlock(&mboxes_lock);
+	}
 }
 
 static struct omap_mbox **find_mboxes(const char *name)
@@ -498,7 +337,7 @@ struct omap_mbox *omap_mbox_get(const char *name)
 
 	read_unlock(&mboxes_lock);
 
-	ret = omap_mbox_init(mbox);
+	ret = omap_mbox_startup(mbox);
 	if (ret)
 		return ERR_PTR(-ENODEV);
 
@@ -522,15 +361,6 @@ int omap_mbox_register(struct device *parent, struct omap_mbox *mbox)
 	if (mbox->next)
 		return -EBUSY;
 
-	mbox->dev = device_create(&omap_mbox_class,
-				  parent, 0, mbox, "%s", mbox->name);
-	if (IS_ERR(mbox->dev))
-		return PTR_ERR(mbox->dev);
-
-	ret = device_create_file(mbox->dev, &dev_attr_mbox);
-	if (ret)
-		goto err_sysfs;
-
 	write_lock(&mboxes_lock);
 	tmp = find_mboxes(mbox->name);
 	if (*tmp) {
@@ -544,9 +374,6 @@ int omap_mbox_register(struct device *parent, struct omap_mbox *mbox)
 	return 0;
 
 err_find:
-	device_remove_file(mbox->dev, &dev_attr_mbox);
-err_sysfs:
-	device_unregister(mbox->dev);
 	return ret;
 }
 EXPORT_SYMBOL(omap_mbox_register);
@@ -562,8 +389,6 @@ int omap_mbox_unregister(struct omap_mbox *mbox)
 			*tmp = mbox->next;
 			mbox->next = NULL;
 			write_unlock(&mboxes_lock);
-			device_remove_file(mbox->dev, &dev_attr_mbox);
-			device_unregister(mbox->dev);
 			return 0;
 		}
 		tmp = &(*tmp)->next;
@@ -574,23 +399,16 @@ int omap_mbox_unregister(struct omap_mbox *mbox)
 }
 EXPORT_SYMBOL(omap_mbox_unregister);
 
-static int __init omap_mbox_class_init(void)
+static int __init omap_mbox_init(void)
 {
-	int ret = class_register(&omap_mbox_class);
-	if (!ret)
-		ret = class_create_file(&omap_mbox_class, &class_attr_mbox);
-
-	return ret;
+	return 0;
 }
+module_init(omap_mbox_init);
 
-static void __exit omap_mbox_class_exit(void)
+static void __exit omap_mbox_exit(void)
 {
-	class_remove_file(&omap_mbox_class, &class_attr_mbox);
-	class_unregister(&omap_mbox_class);
 }
-
-subsys_initcall(omap_mbox_class_init);
-module_exit(omap_mbox_class_exit);
+module_exit(omap_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging");
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index e664b91..2cc1cc3 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,8 +24,8 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <mach/dma.h>
-#include <mach/mcbsp.h>
+#include <plat/dma.h>
+#include <plat/mcbsp.h>
 
 struct omap_mcbsp **mcbsp_ptr;
 int omap_mcbsp_count;
@@ -298,9 +298,7 @@ int omap_mcbsp_get_dma_op_mode(unsigned int id)
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
 
-	spin_lock_irq(&mcbsp->lock);
 	dma_op_mode = mcbsp->dma_op_mode;
-	spin_unlock_irq(&mcbsp->lock);
 
 	return dma_op_mode;
 }
@@ -318,7 +316,6 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
 		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
 		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
 
-		spin_lock_irq(&mcbsp->lock);
 		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
 			syscon |= (ENAWAKEUP | SIDLEMODE(0x02) |
 					CLOCKACTIVITY(0x02));
@@ -327,7 +324,6 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
 		} else {
 			syscon |= SIDLEMODE(0x01);
 		}
-		spin_unlock_irq(&mcbsp->lock);
 
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 	}
@@ -1145,9 +1141,7 @@ static ssize_t dma_op_mode_show(struct device *dev,
 	ssize_t len = 0;
 	const char * const *s;
 
-	spin_lock_irq(&mcbsp->lock);
 	dma_op_mode = mcbsp->dma_op_mode;
-	spin_unlock_irq(&mcbsp->lock);
 
 	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) {
 		if (dma_op_mode == i)
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 8d329fb..0670363 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -28,7 +28,7 @@
 #include <linux/io.h>
 #include <asm/system.h>
 #include <linux/spinlock.h>
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
@@ -54,8 +54,12 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
 {
 	struct pin_config *reg;
 
-	if (cpu_is_omap44xx())
-		return 0;
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
+				index);
+		WARN_ON(1);
+		return -EINVAL;
+	}
 
 	if (mux_cfg == NULL) {
 		printk(KERN_ERR "Pin mux table not initialized\n");
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index e98f0a2..186bca8 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -22,9 +22,9 @@
 #include <linux/device.h>
 
 /* Interface documentation is in mach/omap-pm.h */
-#include <mach/omap-pm.h>
+#include <plat/omap-pm.h>
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 struct omap_opp *dsp_opps;
 struct omap_opp *mpu_opps;
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 2c409fc..1e5648d 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -82,8 +82,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <mach/omap_device.h>
-#include <mach/omap_hwmod.h>
+#include <plat/omap_device.h>
+#include <plat/omap_hwmod.h>
 
 /* These parameters are passed to _omap_device_{de,}activate() */
 #define USE_WAKEUP_LAT			0
@@ -103,21 +103,6 @@
 /* Private functions */
 
 /**
- * _read_32ksynct - read the OMAP 32K sync timer
- *
- * Returns the current value of the 32KiHz synchronization counter.
- * XXX this should be generalized to simply read the system clocksource.
- * XXX this should be moved to a separate synctimer32k.c file
- */
-static u32 _read_32ksynct(void)
-{
-	if (!cpu_class_is_omap2())
-		BUG();
-
-	return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010));
-}
-
-/**
  * _omap_device_activate - increase device readiness
  * @od: struct omap_device *
  * @ignore_lat: increase to latency target (0) or full readiness (1)?
@@ -133,13 +118,13 @@ static u32 _read_32ksynct(void)
  */
 static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
 {
-	u32 a, b;
+	struct timespec a, b, c;
 
 	pr_debug("omap_device: %s: activating\n", od->pdev.name);
 
 	while (od->pm_lat_level > 0) {
 		struct omap_device_pm_latency *odpl;
-		int act_lat = 0;
+		unsigned long long act_lat = 0;
 
 		od->pm_lat_level--;
 
@@ -149,20 +134,22 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
 		    (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
 			break;
 
-		a = _read_32ksynct();
+		read_persistent_clock(&a);
 
 		/* XXX check return code */
 		odpl->activate_func(od);
 
-		b = _read_32ksynct();
+		read_persistent_clock(&b);
 
-		act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+		c = timespec_sub(b, a);
+		act_lat = timespec_to_ns(&c);
 
 		pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
-			 "%d usec\n", od->pdev.name, od->pm_lat_level, act_lat);
+			 "%llu nsec\n", od->pdev.name, od->pm_lat_level,
+			 act_lat);
 
 		WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: "
-		     "activate step %d took longer than expected (%d > %d)\n",
+		     "activate step %d took longer than expected (%llu > %d)\n",
 		     od->pdev.name, od->pdev.id, od->pm_lat_level,
 		     act_lat, odpl->activate_lat);
 
@@ -188,13 +175,13 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
  */
 static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
 {
-	u32 a, b;
+	struct timespec a, b, c;
 
 	pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
 
 	while (od->pm_lat_level < od->pm_lats_cnt) {
 		struct omap_device_pm_latency *odpl;
-		int deact_lat = 0;
+		unsigned long long deact_lat = 0;
 
 		odpl = od->pm_lats + od->pm_lat_level;
 
@@ -203,23 +190,24 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
 		     od->_dev_wakeup_lat_limit))
 			break;
 
-		a = _read_32ksynct();
+		read_persistent_clock(&a);
 
 		/* XXX check return code */
 		odpl->deactivate_func(od);
 
-		b = _read_32ksynct();
+		read_persistent_clock(&b);
 
-		deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+		c = timespec_sub(b, a);
+		deact_lat = timespec_to_ns(&c);
 
 		pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
-			 "%d usec\n", od->pdev.name, od->pm_lat_level,
+			 "%llu nsec\n", od->pdev.name, od->pm_lat_level,
 			 deact_lat);
 
 		WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: "
-		     "deactivate step %d took longer than expected (%d > %d)\n",
-		     od->pdev.name, od->pdev.id, od->pm_lat_level,
-		     deact_lat, odpl->deactivate_lat);
+		     "deactivate step %d took longer than expected "
+		     "(%llu > %d)\n", od->pdev.name, od->pdev.id,
+		     od->pm_lat_level, deact_lat, odpl->deactivate_lat);
 
 		od->dev_wakeup_lat += odpl->activate_lat;
 
@@ -471,7 +459,7 @@ int omap_device_enable(struct platform_device *pdev)
 	ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT);
 
 	od->dev_wakeup_lat = 0;
-	od->_dev_wakeup_lat_limit = INT_MAX;
+	od->_dev_wakeup_lat_limit = UINT_MAX;
 	od->_state = OMAP_DEVICE_STATE_ENABLED;
 
 	return ret;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 75d1f26..d8d5094 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -25,11 +25,12 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/sram.h>
-#include <mach/board.h>
-#include <mach/cpu.h>
+#include <plat/sram.h>
+#include <plat/board.h>
+#include <plat/cpu.h>
+#include <plat/vram.h>
 
-#include <mach/control.h>
+#include <plat/control.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/prm.h"
@@ -41,14 +42,16 @@
 #define OMAP1_SRAM_VA		VMALLOC_END
 #define OMAP2_SRAM_PA		0x40200000
 #define OMAP2_SRAM_PUB_PA	0x4020f800
-#define OMAP2_SRAM_VA		0xe3000000
+#define OMAP2_SRAM_VA		0xfe400000
 #define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
 #define OMAP3_SRAM_PA           0x40200000
-#define OMAP3_SRAM_VA           0xe3000000
+#define OMAP3_SRAM_VA           0xfe400000
 #define OMAP3_SRAM_PUB_PA       0x40208000
 #define OMAP3_SRAM_PUB_VA       (OMAP3_SRAM_VA + 0x8000)
-#define OMAP4_SRAM_PA		0x40200000		/*0x402f0000*/
-#define OMAP4_SRAM_VA		0xd7000000		/*0xd70f0000*/
+#define OMAP4_SRAM_PA		0x40300000
+#define OMAP4_SRAM_VA		0xfe400000
+#define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
+#define OMAP4_SRAM_PUB_VA	(OMAP4_SRAM_VA + 0x4000)
 
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define SRAM_BOOTLOADER_SZ	0x00
@@ -56,16 +59,16 @@
 #define SRAM_BOOTLOADER_SZ	0x80
 #endif
 
-#define OMAP24XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68005058)
+#define OMAP24XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68005058)
 
-#define OMAP34XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68012848)
-#define OMAP34XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68012850)
-#define OMAP34XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68012858)
-#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_IO_ADDRESS(0x68012880)
-#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_IO_ADDRESS(0x6C000048)
-#define OMAP34XX_VA_CONTROL_STAT	OMAP2_IO_ADDRESS(0x480022F0)
+#define OMAP34XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_L3_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_L3_IO_ADDRESS(0x6C000048)
+#define OMAP34XX_VA_CONTROL_STAT	OMAP2_L4_IO_ADDRESS(0x480022F0)
 
 #define GP_DEVICE		0x300
 
@@ -139,6 +142,10 @@ void __init omap_detect_sram(void)
 				} else {
 					omap_sram_size = 0x8000; /* 32K */
 				}
+			} else if (cpu_is_omap44xx()) {
+				omap_sram_base = OMAP4_SRAM_PUB_VA;
+				omap_sram_start = OMAP4_SRAM_PUB_PA;
+				omap_sram_size = 0xa000; /* 40K */
 			} else {
 				omap_sram_base = OMAP2_SRAM_PUB_VA;
 				omap_sram_start = OMAP2_SRAM_PUB_PA;
@@ -152,7 +159,7 @@ void __init omap_detect_sram(void)
 			} else if (cpu_is_omap44xx()) {
 				omap_sram_base = OMAP4_SRAM_VA;
 				omap_sram_start = OMAP4_SRAM_PA;
-				omap_sram_size = 0x8000; /* 32K */
+				omap_sram_size = 0xe000; /* 56K */
 			} else {
 				omap_sram_base = OMAP2_SRAM_VA;
 				omap_sram_start = OMAP2_SRAM_PA;
@@ -185,6 +192,13 @@ void __init omap_detect_sram(void)
 				       omap_sram_start + SRAM_BOOTLOADER_SZ,
 				       omap_sram_size - SRAM_BOOTLOADER_SZ);
 	omap_sram_size -= reserved;
+
+	reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base,
+			omap_sram_size,
+			omap_sram_start + SRAM_BOOTLOADER_SZ,
+			omap_sram_size - SRAM_BOOTLOADER_SZ);
+	omap_sram_size -= reserved;
+
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
 }
 
@@ -396,22 +410,24 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
 			sdrc_actim_ctrl_b_1, sdrc_mr_1);
 }
 
-/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
-void restore_sram_functions(void)
+#ifdef CONFIG_PM
+void omap3_sram_restore_context(void)
 {
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
 
 	_omap3_sram_configure_core_dpll =
 		omap_sram_push(omap3_sram_configure_core_dpll,
 			       omap3_sram_configure_core_dpll_sz);
+	omap_push_sram_idle();
 }
+#endif /* CONFIG_PM */
 
 int __init omap34xx_sram_init(void)
 {
 	_omap3_sram_configure_core_dpll =
 		omap_sram_push(omap3_sram_configure_core_dpll,
 			       omap3_sram_configure_core_dpll_sz);
-
+	omap_push_sram_idle();
 	return 0;
 }
 #else
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 509f2ed..d3bf17c 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -33,10 +33,10 @@
 #include <asm/system.h>
 #include <mach/hardware.h>
 
-#include <mach/control.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
+#include <plat/control.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
 
 #ifdef CONFIG_ARCH_OMAP1
 
@@ -137,7 +137,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 	if (is_device) {
 		if (cpu_is_omap24xx())
 			omap_cfg_reg(J20_24XX_USB0_PUEN);
-		else
+		else if (cpu_is_omap7xx()) {
+			omap_cfg_reg(AA17_7XX_USB_DM);
+			omap_cfg_reg(W16_7XX_USB_PU_EN);
+			omap_cfg_reg(W17_7XX_USB_VBUSI);
+			omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
+			omap_cfg_reg(W19_7XX_USB_DCRST);
+		} else
 			omap_cfg_reg(W4_USB_PUEN);
 	}
 
@@ -159,11 +165,14 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 		 *  - OTG support on this port not yet written
 		 */
 
-		l = omap_readl(USB_TRANSCEIVER_CTRL);
-		l &= ~(7 << 4);
-		if (!is_device)
-			l |= (3 << 1);
-		omap_writel(l, USB_TRANSCEIVER_CTRL);
+		/* Don't do this for omap7xx -- it causes USB to not work correctly */
+		if (!cpu_is_omap7xx()) {
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l &= ~(7 << 4);
+			if (!is_device)
+				l |= (3 << 1);
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
 
 		return 3 << 16;
 	}
@@ -603,7 +612,12 @@ omap_otg_init(struct omap_usb_config *config)
 	if (config->otg || config->register_dev) {
 		syscon &= ~DEV_IDLE_EN;
 		udc_device.dev.platform_data = config;
-		/* FIXME patch IRQ numbers for omap730 */
+		/* IRQ numbers for omap7xx */
+		if(cpu_is_omap7xx()) {
+			udc_resources[1].start = INT_7XX_USB_GENI;
+			udc_resources[2].start = INT_7XX_USB_NON_ISO;
+			udc_resources[3].start = INT_7XX_USB_ISO;
+		}
 		status = platform_device_register(&udc_device);
 		if (status)
 			pr_debug("can't register UDC device, %d\n", status);
@@ -614,8 +628,8 @@ omap_otg_init(struct omap_usb_config *config)
 	if (config->otg || config->register_host) {
 		syscon &= ~HST_IDLE_EN;
 		ohci_device.dev.platform_data = config;
-		if (cpu_is_omap730())
-			ohci_resources[1].start = INT_730_USB_HHC_1;
+		if (cpu_is_omap7xx())
+			ohci_resources[1].start = INT_7XX_USB_HHC_1;
 		status = platform_device_register(&ohci_device);
 		if (status)
 			pr_debug("can't register OHCI device, %d\n", status);
@@ -626,8 +640,8 @@ omap_otg_init(struct omap_usb_config *config)
 	if (config->otg) {
 		syscon &= ~OTG_IDLE_EN;
 		otg_device.dev.platform_data = config;
-		if (cpu_is_omap730())
-			otg_resources[1].start = INT_730_USB_OTG;
+		if (cpu_is_omap7xx())
+			otg_resources[1].start = INT_7XX_USB_OTG;
 		status = platform_device_register(&otg_device);
 		if (status)
 			pr_debug("can't register OTG device, %d\n", status);
@@ -731,7 +745,7 @@ static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
 
 void __init omap_usb_init(struct omap_usb_config *pdata)
 {
-	if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx())
+	if (cpu_is_omap7xx() || cpu_is_omap16xx() || cpu_is_omap24xx())
 		omap_otg_init(pdata);
 	else if (cpu_is_omap15xx())
 		omap_1510_usb_init(pdata);