1 files changed, 382 insertions, 19 deletions

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index efa0e01..8dc7927 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -198,6 +198,170 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
 }
 EXPORT_SYMBOL(omap_mcbsp_config);
 
+#ifdef CONFIG_ARCH_OMAP34XX
+/*
+ * omap_mcbsp_set_tx_threshold configures how to deal
+ * with transmit threshold. the threshold value and handler can be
+ * configure in here.
+ */
+void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
+{
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
+
+	if (!cpu_is_omap34xx())
+		return;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+
+	OMAP_MCBSP_WRITE(io_base, THRSH2, threshold);
+}
+EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold);
+
+/*
+ * omap_mcbsp_set_rx_threshold configures how to deal
+ * with receive threshold. the threshold value and handler can be
+ * configure in here.
+ */
+void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
+{
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
+
+	if (!cpu_is_omap34xx())
+		return;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+
+	OMAP_MCBSP_WRITE(io_base, THRSH1, threshold);
+}
+EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold);
+
+/*
+ * omap_mcbsp_get_max_tx_thres just return the current configured
+ * maximum threshold for transmission
+ */
+u16 omap_mcbsp_get_max_tx_threshold(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	return mcbsp->max_tx_thres;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_max_tx_threshold);
+
+/*
+ * omap_mcbsp_get_max_rx_thres just return the current configured
+ * maximum threshold for reception
+ */
+u16 omap_mcbsp_get_max_rx_threshold(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	return mcbsp->max_rx_thres;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
+
+/*
+ * omap_mcbsp_get_dma_op_mode just return the current configured
+ * operating mode for the mcbsp channel
+ */
+int omap_mcbsp_get_dma_op_mode(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+	int dma_op_mode;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	spin_lock_irq(&mcbsp->lock);
+	dma_op_mode = mcbsp->dma_op_mode;
+	spin_unlock_irq(&mcbsp->lock);
+
+	return dma_op_mode;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
+
+static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
+{
+	/*
+	 * Enable wakup behavior, smart idle and all wakeups
+	 * REVISIT: some wakeups may be unnecessary
+	 */
+	if (cpu_is_omap34xx()) {
+		u16 syscon;
+
+		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
+
+		spin_lock_irq(&mcbsp->lock);
+		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
+			syscon |= (ENAWAKEUP | SIDLEMODE(0x02) |
+					CLOCKACTIVITY(0x02));
+			OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN,
+					XRDYEN | RRDYEN);
+		} else {
+			syscon |= SIDLEMODE(0x01);
+		}
+		spin_unlock_irq(&mcbsp->lock);
+
+		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+	}
+}
+
+static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
+{
+	/*
+	 * Disable wakup behavior, smart idle and all wakeups
+	 */
+	if (cpu_is_omap34xx()) {
+		u16 syscon;
+
+		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
+		/*
+		 * HW bug workaround - If no_idle mode is taken, we need to
+		 * go to smart_idle before going to always_idle, or the
+		 * device will not hit retention anymore.
+		 */
+		syscon |= SIDLEMODE(0x02);
+		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+		syscon &= ~(SIDLEMODE(0x03));
+		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0);
+	}
+}
+#else
+static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
+static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
+#endif
+
 /*
  * We can choose between IRQ based or polled IO.
  * This needs to be called before omap_mcbsp_request().
@@ -257,6 +421,9 @@ int omap_mcbsp_request(unsigned int id)
 	clk_enable(mcbsp->iclk);
 	clk_enable(mcbsp->fclk);
 
+	/* Do procedure specific to omap34xx arch, if applicable */
+	omap34xx_mcbsp_request(mcbsp);
+
 	/*
 	 * Make sure that transmitter, receiver and sample-rate generator are
 	 * not running before activating IRQs.
@@ -305,6 +472,9 @@ void omap_mcbsp_free(unsigned int id)
 	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
 		mcbsp->pdata->ops->free(id);
 
+	/* Do procedure specific to omap34xx arch, if applicable */
+	omap34xx_mcbsp_free(mcbsp);
+
 	clk_disable(mcbsp->fclk);
 	clk_disable(mcbsp->iclk);
 
@@ -328,14 +498,15 @@ void omap_mcbsp_free(unsigned int id)
 EXPORT_SYMBOL(omap_mcbsp_free);
 
 /*
- * Here we start the McBSP, by enabling the sample
- * generator, both transmitter and receivers,
- * and the frame sync.
+ * Here we start the McBSP, by enabling transmitter, receiver or both.
+ * If no transmitter or receiver is active prior calling, then sample-rate
+ * generator and frame sync are started.
  */
-void omap_mcbsp_start(unsigned int id)
+void omap_mcbsp_start(unsigned int id, int tx, int rx)
 {
 	struct omap_mcbsp *mcbsp;
 	void __iomem *io_base;
+	int idle;
 	u16 w;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -348,32 +519,58 @@ void omap_mcbsp_start(unsigned int id)
 	mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
 	mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
 
-	/* Start the sample generator */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+	if (idle) {
+		/* Start the sample generator */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+	}
 
 	/* Enable transmitter and receiver */
+	tx &= 1;
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1);
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w | tx);
 
+	rx &= 1;
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1);
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w | rx);
 
-	udelay(100);
+	/*
+	 * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec
+	 * REVISIT: 100us may give enough time for two CLKSRG, however
+	 * due to some unknown PM related, clock gating etc. reason it
+	 * is now at 500us.
+	 */
+	udelay(500);
 
-	/* Start frame sync */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+	if (idle) {
+		/* Start frame sync */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+	}
+
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		/* Release the transmitter and receiver */
+		w = OMAP_MCBSP_READ(io_base, XCCR);
+		w &= ~(tx ? XDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, XCCR, w);
+		w = OMAP_MCBSP_READ(io_base, RCCR);
+		w &= ~(rx ? RDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, RCCR, w);
+	}
 
 	/* Dump McBSP Regs */
 	omap_mcbsp_dump_reg(id);
 }
 EXPORT_SYMBOL(omap_mcbsp_start);
 
-void omap_mcbsp_stop(unsigned int id)
+void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 {
 	struct omap_mcbsp *mcbsp;
 	void __iomem *io_base;
+	int idle;
 	u16 w;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -385,16 +582,33 @@ void omap_mcbsp_stop(unsigned int id)
 	io_base = mcbsp->io_base;
 
 	/* Reset transmitter */
+	tx &= 1;
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		w = OMAP_MCBSP_READ(io_base, XCCR);
+		w |= (tx ? XDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, XCCR, w);
+	}
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1));
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~tx);
 
 	/* Reset receiver */
+	rx &= 1;
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		w = OMAP_MCBSP_READ(io_base, RCCR);
+		w |= (tx ? RDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, RCCR, w);
+	}
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1));
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~rx);
 
-	/* Reset the sample rate generator */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+	if (idle) {
+		/* Reset the sample rate generator */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+	}
 }
 EXPORT_SYMBOL(omap_mcbsp_stop);
 
@@ -883,6 +1097,149 @@ void omap_mcbsp_set_spi_mode(unsigned int id,
 }
 EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
 
+#ifdef CONFIG_ARCH_OMAP34XX
+#define max_thres(m)			(mcbsp->pdata->buffer_size)
+#define valid_threshold(m, val)		((val) <= max_thres(m))
+#define THRESHOLD_PROP_BUILDER(prop)					\
+static ssize_t prop##_show(struct device *dev,				\
+			struct device_attribute *attr, char *buf)	\
+{									\
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);		\
+									\
+	return sprintf(buf, "%u\n", mcbsp->prop);			\
+}									\
+									\
+static ssize_t prop##_store(struct device *dev,				\
+				struct device_attribute *attr,		\
+				const char *buf, size_t size)		\
+{									\
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);		\
+	unsigned long val;						\
+	int status;							\
+									\
+	status = strict_strtoul(buf, 0, &val);				\
+	if (status)							\
+		return status;						\
+									\
+	if (!valid_threshold(mcbsp, val))				\
+		return -EDOM;						\
+									\
+	mcbsp->prop = val;						\
+	return size;							\
+}									\
+									\
+static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
+
+THRESHOLD_PROP_BUILDER(max_tx_thres);
+THRESHOLD_PROP_BUILDER(max_rx_thres);
+
+static const char *dma_op_modes[] = {
+	"element", "threshold", "frame",
+};
+
+static ssize_t dma_op_mode_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+	int dma_op_mode, i = 0;
+	ssize_t len = 0;
+	const char * const *s;
+
+	spin_lock_irq(&mcbsp->lock);
+	dma_op_mode = mcbsp->dma_op_mode;
+	spin_unlock_irq(&mcbsp->lock);
+
+	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) {
+		if (dma_op_mode == i)
+			len += sprintf(buf + len, "[%s] ", *s);
+		else
+			len += sprintf(buf + len, "%s ", *s);
+	}
+	len += sprintf(buf + len, "\n");
+
+	return len;
+}
+
+static ssize_t dma_op_mode_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t size)
+{
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+	const char * const *s;
+	int i = 0;
+
+	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++)
+		if (sysfs_streq(buf, *s))
+			break;
+
+	if (i == ARRAY_SIZE(dma_op_modes))
+		return -EINVAL;
+
+	spin_lock_irq(&mcbsp->lock);
+	if (!mcbsp->free) {
+		size = -EBUSY;
+		goto unlock;
+	}
+	mcbsp->dma_op_mode = i;
+
+unlock:
+	spin_unlock_irq(&mcbsp->lock);
+
+	return size;
+}
+
+static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
+
+static const struct attribute *additional_attrs[] = {
+	&dev_attr_max_tx_thres.attr,
+	&dev_attr_max_rx_thres.attr,
+	&dev_attr_dma_op_mode.attr,
+	NULL,
+};
+
+static const struct attribute_group additional_attr_group = {
+	.attrs = (struct attribute **)additional_attrs,
+};
+
+static inline int __devinit omap_additional_add(struct device *dev)
+{
+	return sysfs_create_group(&dev->kobj, &additional_attr_group);
+}
+
+static inline void __devexit omap_additional_remove(struct device *dev)
+{
+	sysfs_remove_group(&dev->kobj, &additional_attr_group);
+}
+
+static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
+{
+	mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
+	if (cpu_is_omap34xx()) {
+		mcbsp->max_tx_thres = max_thres(mcbsp);
+		mcbsp->max_rx_thres = max_thres(mcbsp);
+		/*
+		 * REVISIT: Set dmap_op_mode to THRESHOLD as default
+		 * for mcbsp2 instances.
+		 */
+		if (omap_additional_add(mcbsp->dev))
+			dev_warn(mcbsp->dev,
+				"Unable to create additional controls\n");
+	} else {
+		mcbsp->max_tx_thres = -EINVAL;
+		mcbsp->max_rx_thres = -EINVAL;
+	}
+}
+
+static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
+{
+	if (cpu_is_omap34xx())
+		omap_additional_remove(mcbsp->dev);
+}
+#else
+static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
+static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
+#endif /* CONFIG_ARCH_OMAP34XX */
+
 /*
  * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
  * 730 has only 2 McBSP, and both of them are MPU peripherals.
@@ -953,6 +1310,10 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	mcbsp->dev = &pdev->dev;
 	mcbsp_ptr[id] = mcbsp;
 	platform_set_drvdata(pdev, mcbsp);
+
+	/* Initialize mcbsp properties for OMAP34XX if needed / applicable */
+	omap34xx_device_init(mcbsp);
+
 	return 0;
 
 err_fclk:
@@ -976,6 +1337,8 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 				mcbsp->pdata->ops->free)
 			mcbsp->pdata->ops->free(mcbsp->id);
 
+		omap34xx_device_exit(mcbsp);
+
 		clk_disable(mcbsp->fclk);
 		clk_disable(mcbsp->iclk);
 		clk_put(mcbsp->fclk);