diff options
Diffstat (limited to 'arch/arm/plat-omap/include')
21 files changed, 293 insertions, 443 deletions
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 9776b41..a9d69a0 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -47,6 +47,7 @@ struct omap_globals { unsigned long sdrc; /* SDRAM Controller */ unsigned long sms; /* SDRAM Memory Scheduler */ unsigned long ctrl; /* System Control Module */ + unsigned long ctrl_pad; /* PAD Control Module */ unsigned long prm; /* Power and Reset Management */ unsigned long cm; /* Clock Management */ unsigned long cm2; @@ -66,7 +67,6 @@ void omap2_set_globals_tap(struct omap_globals *); void omap2_set_globals_sdrc(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); -void omap2_set_globals_uart(struct omap_globals *); void omap3_map_io(void); @@ -91,7 +91,8 @@ void omap3_map_io(void); }) extern struct device *omap2_get_mpuss_device(void); -extern struct device *omap2_get_dsp_device(void); +extern struct device *omap2_get_iva_device(void); extern struct device *omap2_get_l3_device(void); +extern struct device *omap4_get_dsp_device(void); #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h deleted file mode 100644 index 131bf40..0000000 --- a/arch/arm/plat-omap/include/plat/control.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/control.h - * - * OMAP2/3/4 System Control Module definitions - * - * Copyright (C) 2007-2009 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation - * - * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_CONTROL_H -#define __ASM_ARCH_CONTROL_H - -#include <mach/io.h> - -#ifndef __ASSEMBLY__ -#define OMAP242X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) -#define OMAP243X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) -#define OMAP343X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) -#else -#define OMAP242X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) -#define OMAP243X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) -#define OMAP343X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) -#endif /* __ASSEMBLY__ */ - -/* - * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for - * OMAP24XX and OMAP34XX. - */ - -/* Control submodule offsets */ - -#define OMAP2_CONTROL_INTERFACE 0x000 -#define OMAP2_CONTROL_PADCONFS 0x030 -#define OMAP2_CONTROL_GENERAL 0x270 -#define OMAP343X_CONTROL_MEM_WKUP 0x600 -#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00 -#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60 - -/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */ - -#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10) - -/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */ -#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004) -#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020) -#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024) -#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028) -#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c) -#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030) -#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034) -#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040) -#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090) -#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094) -#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098) -#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c) - -/* 242x-only CONTROL_GENERAL register offsets */ -#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */ -#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068) - -/* 243x-only CONTROL_GENERAL register offsets */ -/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */ -#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078) -#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c) -#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) -#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) -#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198) -#define OMAP243X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x0230) - -/* 24xx-only CONTROL_GENERAL register offsets */ -#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000) -#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008) -#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044) -#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048) -#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c) -#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050) -#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060) -#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064) -#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c) -#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070) -#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074) -#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) -#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) -#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088) -#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c) -#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0) -#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4) -#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8) -#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac) -#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0) -#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4) -#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0) -#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4) -#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8) -#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc) -#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0) -#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4) -#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8) -#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc) -#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0) -#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4) - -#define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0) - -/* 34xx-only CONTROL_GENERAL register offsets */ -#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000) -#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008) -#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c) -#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068) -#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c) -#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070) -#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074) -#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078) -#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) -#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) -#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0) -#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8) -#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac) -#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0) -#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4) -#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8) -#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc) -#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0) -#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4) -#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8) -#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc) -#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0) -#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4) -#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8) -#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec) -#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0) -#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4) -#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8) -#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) -#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) -#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) -#define OMAP343X_CONTROL_DEBOBS(i) (OMAP2_CONTROL_GENERAL + 0x01B0 \ - + ((i) >> 1) * 4 + (!((i) & 1)) * 2) -#define OMAP343X_CONTROL_PROG_IO0 (OMAP2_CONTROL_GENERAL + 0x01D4) -#define OMAP343X_CONTROL_PROG_IO1 (OMAP2_CONTROL_GENERAL + 0x01D8) -#define OMAP343X_CONTROL_DSS_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E0) -#define OMAP343X_CONTROL_CORE_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E4) -#define OMAP343X_CONTROL_PER_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E8) -#define OMAP343X_CONTROL_USBHOST_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01EC) -#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02B0) -#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02B4) -#define OMAP343X_CONTROL_SRAMLDO4 (OMAP2_CONTROL_GENERAL + 0x02B8) -#define OMAP343X_CONTROL_SRAMLDO5 (OMAP2_CONTROL_GENERAL + 0x02C0) -#define OMAP343X_CONTROL_CSI (OMAP2_CONTROL_GENERAL + 0x02C4) - -/* AM35XX only CONTROL_GENERAL register offsets */ -#define AM35XX_CONTROL_MSUSPENDMUX_6 (OMAP2_CONTROL_GENERAL + 0x0038) -#define AM35XX_CONTROL_DEVCONF2 (OMAP2_CONTROL_GENERAL + 0x0310) -#define AM35XX_CONTROL_DEVCONF3 (OMAP2_CONTROL_GENERAL + 0x0314) -#define AM35XX_CONTROL_CBA_PRIORITY (OMAP2_CONTROL_GENERAL + 0x0320) -#define AM35XX_CONTROL_LVL_INTR_CLEAR (OMAP2_CONTROL_GENERAL + 0x0324) -#define AM35XX_CONTROL_IP_SW_RESET (OMAP2_CONTROL_GENERAL + 0x0328) -#define AM35XX_CONTROL_IPSS_CLK_CTRL (OMAP2_CONTROL_GENERAL + 0x032C) - -/* 34xx PADCONF register offsets */ -#define OMAP343X_PADCONF_ETK(i) (OMAP2_CONTROL_PADCONFS + 0x5a8 + \ - (i)*2) -#define OMAP343X_PADCONF_ETK_CLK OMAP343X_PADCONF_ETK(0) -#define OMAP343X_PADCONF_ETK_CTL OMAP343X_PADCONF_ETK(1) -#define OMAP343X_PADCONF_ETK_D0 OMAP343X_PADCONF_ETK(2) -#define OMAP343X_PADCONF_ETK_D1 OMAP343X_PADCONF_ETK(3) -#define OMAP343X_PADCONF_ETK_D2 OMAP343X_PADCONF_ETK(4) -#define OMAP343X_PADCONF_ETK_D3 OMAP343X_PADCONF_ETK(5) -#define OMAP343X_PADCONF_ETK_D4 OMAP343X_PADCONF_ETK(6) -#define OMAP343X_PADCONF_ETK_D5 OMAP343X_PADCONF_ETK(7) -#define OMAP343X_PADCONF_ETK_D6 OMAP343X_PADCONF_ETK(8) -#define OMAP343X_PADCONF_ETK_D7 OMAP343X_PADCONF_ETK(9) -#define OMAP343X_PADCONF_ETK_D8 OMAP343X_PADCONF_ETK(10) -#define OMAP343X_PADCONF_ETK_D9 OMAP343X_PADCONF_ETK(11) -#define OMAP343X_PADCONF_ETK_D10 OMAP343X_PADCONF_ETK(12) -#define OMAP343X_PADCONF_ETK_D11 OMAP343X_PADCONF_ETK(13) -#define OMAP343X_PADCONF_ETK_D12 OMAP343X_PADCONF_ETK(14) -#define OMAP343X_PADCONF_ETK_D13 OMAP343X_PADCONF_ETK(15) -#define OMAP343X_PADCONF_ETK_D14 OMAP343X_PADCONF_ETK(16) -#define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17) - -/* 34xx GENERAL_WKUP regist offsets */ -#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \ - 0x008 + (i)) -#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008) -#define OMAP343X_CONTROL_WKUP_DEBOBS1 (OMAP343X_CONTROL_GENERAL_WKUP + 0x00C) -#define OMAP343X_CONTROL_WKUP_DEBOBS2 (OMAP343X_CONTROL_GENERAL_WKUP + 0x010) -#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014) -#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018) - -/* 34xx D2D idle-related pins, handled by PM core */ -#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 -#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254 - -/* 44xx control status register offset */ -#define OMAP44XX_CONTROL_STATUS 0x2c4 - -/* 44xx-only CONTROL_GENERAL register offsets */ -#define OMAP44XX_CONTROL_MMC1 0x628 -#define OMAP44XX_CONTROL_PBIAS_LITE 0x600 -/* - * REVISIT: This list of registers is not comprehensive - there are more - * that should be added. - */ - -/* - * Control module register bit defines - these should eventually go into - * their own regbits file. Some of these will be complicated, depending - * on the device type (general-purpose, emulator, test, secure, bad, other) - * and the security mode (secure, non-secure, don't care) - */ -/* CONTROL_DEVCONF0 bits */ -#define OMAP2_MMCSDIO1ADPCLKISEL (1 << 24) /* MMC1 loop back clock */ -#define OMAP24XX_USBSTANDBYCTRL (1 << 15) -#define OMAP2_MCBSP2_CLKS_MASK (1 << 6) -#define OMAP2_MCBSP1_CLKS_MASK (1 << 2) - -/* CONTROL_DEVCONF1 bits */ -#define OMAP243X_MMC1_ACTIVE_OVERWRITE (1 << 31) -#define OMAP2_MMCSDIO2ADPCLKISEL (1 << 6) /* MMC2 loop back clock */ -#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */ -#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */ -#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */ - -/* CONTROL_STATUS bits */ -#define OMAP2_DEVICETYPE_MASK (0x7 << 8) -#define OMAP2_SYSBOOT_5_MASK (1 << 5) -#define OMAP2_SYSBOOT_4_MASK (1 << 4) -#define OMAP2_SYSBOOT_3_MASK (1 << 3) -#define OMAP2_SYSBOOT_2_MASK (1 << 2) -#define OMAP2_SYSBOOT_1_MASK (1 << 1) -#define OMAP2_SYSBOOT_0_MASK (1 << 0) - -/* CONTROL_PBIAS_LITE bits */ -#define OMAP343X_PBIASLITESUPPLY_HIGH1 (1 << 15) -#define OMAP343X_PBIASLITEVMODEERROR1 (1 << 11) -#define OMAP343X_PBIASSPEEDCTRL1 (1 << 10) -#define OMAP343X_PBIASLITEPWRDNZ1 (1 << 9) -#define OMAP343X_PBIASLITEVMODE1 (1 << 8) -#define OMAP343X_PBIASLITESUPPLY_HIGH0 (1 << 7) -#define OMAP343X_PBIASLITEVMODEERROR0 (1 << 3) -#define OMAP2_PBIASSPEEDCTRL0 (1 << 2) -#define OMAP2_PBIASLITEPWRDNZ0 (1 << 1) -#define OMAP2_PBIASLITEVMODE0 (1 << 0) - -/* CONTROL_PBIAS_LITE bits for OMAP4 */ -#define OMAP4_MMC1_PWRDNZ (1 << 26) -#define OMAP4_MMC1_PBIASLITE_HIZ_MODE (1 << 25) -#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT (1 << 24) -#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR (1 << 23) -#define OMAP4_MMC1_PBIASLITE_PWRDNZ (1 << 22) -#define OMAP4_MMC1_PBIASLITE_VMODE (1 << 21) -#define OMAP4_USBC1_ICUSB_PWRDNZ (1 << 20) - -#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0 (1 << 31) -#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1 (1 << 30) -#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2 (1 << 29) -#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3 (1 << 28) -#define OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL (1 << 27) -#define OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL (1 << 26) -#define OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL (1 << 25) - -/* CONTROL_PROG_IO1 bits */ -#define OMAP3630_PRG_SDMMC1_SPEEDCTRL (1 << 20) - -/* CONTROL_IVA2_BOOTMOD bits */ -#define OMAP3_IVA2_BOOTMOD_SHIFT 0 -#define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0) -#define OMAP3_IVA2_BOOTMOD_IDLE (0x1 << 0) - -/* CONTROL_PADCONF_X bits */ -#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15) -#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14) - -#define OMAP343X_SCRATCHPAD_ROM (OMAP343X_CTRL_BASE + 0x860) -#define OMAP343X_SCRATCHPAD (OMAP343X_CTRL_BASE + 0x910) -#define OMAP343X_SCRATCHPAD_ROM_OFFSET 0x19C - -/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */ -#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0 -#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1 -#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2 -#define AM35XX_HECC_VBUSP_CLK_SHIFT 3 -#define AM35XX_USBOTG_FCLK_SHIFT 8 -#define AM35XX_CPGMAC_FCLK_SHIFT 9 -#define AM35XX_VPFE_FCLK_SHIFT 10 - -/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/ -#define AM35XX_CPGMAC_C0_MISC_PULSE_CLR BIT(0) -#define AM35XX_CPGMAC_C0_RX_PULSE_CLR BIT(1) -#define AM35XX_CPGMAC_C0_RX_THRESH_CLR BIT(2) -#define AM35XX_CPGMAC_C0_TX_PULSE_CLR BIT(3) -#define AM35XX_USBOTGSS_INT_CLR BIT(4) -#define AM35XX_VPFE_CCDC_VD0_INT_CLR BIT(5) -#define AM35XX_VPFE_CCDC_VD1_INT_CLR BIT(6) -#define AM35XX_VPFE_CCDC_VD2_INT_CLR BIT(7) - -/*AM35XX CONTROL_IP_SW_RESET bits*/ -#define AM35XX_USBOTGSS_SW_RST BIT(0) -#define AM35XX_CPGMACSS_SW_RST BIT(1) -#define AM35XX_VPFE_VBUSP_SW_RST BIT(2) -#define AM35XX_HECC_SW_RST BIT(3) -#define AM35XX_VPFE_PCLK_SW_RST BIT(4) - -/* - * CONTROL OMAP STATUS register to identify OMAP3 features - */ -#define OMAP3_CONTROL_OMAP_STATUS 0x044c - -#define OMAP3_SGX_SHIFT 13 -#define OMAP3_SGX_MASK (3 << OMAP3_SGX_SHIFT) -#define FEAT_SGX_FULL 0 -#define FEAT_SGX_HALF 1 -#define FEAT_SGX_NONE 2 - -#define OMAP3_IVA_SHIFT 12 -#define OMAP3_IVA_MASK (1 << OMAP3_SGX_SHIFT) -#define FEAT_IVA 0 -#define FEAT_IVA_NONE 1 - -#define OMAP3_L2CACHE_SHIFT 10 -#define OMAP3_L2CACHE_MASK (3 << OMAP3_L2CACHE_SHIFT) -#define FEAT_L2CACHE_NONE 0 -#define FEAT_L2CACHE_64KB 1 -#define FEAT_L2CACHE_128KB 2 -#define FEAT_L2CACHE_256KB 3 - -#define OMAP3_ISP_SHIFT 5 -#define OMAP3_ISP_MASK (1<< OMAP3_ISP_SHIFT) -#define FEAT_ISP 0 -#define FEAT_ISP_NONE 1 - -#define OMAP3_NEON_SHIFT 4 -#define OMAP3_NEON_MASK (1<< OMAP3_NEON_SHIFT) -#define FEAT_NEON 0 -#define FEAT_NEON_NONE 1 - - -#ifndef __ASSEMBLY__ -#ifdef CONFIG_ARCH_OMAP2PLUS -extern void __iomem *omap_ctrl_base_get(void); -extern u8 omap_ctrl_readb(u16 offset); -extern u16 omap_ctrl_readw(u16 offset); -extern u32 omap_ctrl_readl(u16 offset); -extern void omap_ctrl_writeb(u8 val, u16 offset); -extern void omap_ctrl_writew(u16 val, u16 offset); -extern void omap_ctrl_writel(u32 val, u16 offset); - -extern void omap3_save_scratchpad_contents(void); -extern void omap3_clear_scratchpad_contents(void); -extern u32 *get_restore_pointer(void); -extern u32 *get_es3_restore_pointer(void); -extern u32 omap3_arm_context[128]; -extern void omap3_control_save_context(void); -extern void omap3_control_restore_context(void); - -#else -#define omap_ctrl_base_get() 0 -#define omap_ctrl_readb(x) 0 -#define omap_ctrl_readw(x) 0 -#define omap_ctrl_readl(x) 0 -#define omap_ctrl_writeb(x, y) WARN_ON(1) -#define omap_ctrl_writew(x, y) WARN_ON(1) -#define omap_ctrl_writel(x, y) WARN_ON(1) -#endif -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARCH_CONTROL_H */ - diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 2e2ae53..3fd8b40 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -68,10 +68,9 @@ unsigned int omap_rev(void); #define OMAP_REVBITS_00 0x00 #define OMAP_REVBITS_01 0x01 #define OMAP_REVBITS_02 0x02 -#define OMAP_REVBITS_10 0x10 -#define OMAP_REVBITS_20 0x20 -#define OMAP_REVBITS_30 0x30 -#define OMAP_REVBITS_40 0x40 +#define OMAP_REVBITS_03 0x03 +#define OMAP_REVBITS_04 0x04 +#define OMAP_REVBITS_05 0x05 /* * Get the CPU revision for OMAP devices @@ -363,23 +362,24 @@ IS_OMAP_TYPE(3517, 0x3517) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 -#define OMAP2420_REV_ES1_0 0x24200024 -#define OMAP2420_REV_ES2_0 0x24201024 +#define OMAP2420_REV_ES1_0 OMAP242X_CLASS +#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (OMAP_REVBITS_01 << 8)) #define OMAP243X_CLASS 0x24300024 -#define OMAP2430_REV_ES1_0 0x24300024 +#define OMAP2430_REV_ES1_0 OMAP243X_CLASS #define OMAP343X_CLASS 0x34300034 -#define OMAP3430_REV_ES1_0 0x34300034 -#define OMAP3430_REV_ES2_0 0x34301034 -#define OMAP3430_REV_ES2_1 0x34302034 -#define OMAP3430_REV_ES3_0 0x34303034 -#define OMAP3430_REV_ES3_1 0x34304034 -#define OMAP3430_REV_ES3_1_2 0x34305034 - -#define OMAP3630_REV_ES1_0 0x36300034 -#define OMAP3630_REV_ES1_1 0x36300134 -#define OMAP3630_REV_ES1_2 0x36300234 +#define OMAP3430_REV_ES1_0 OMAP343X_CLASS +#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (OMAP_REVBITS_01 << 8)) +#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (OMAP_REVBITS_02 << 8)) +#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (OMAP_REVBITS_03 << 8)) +#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (OMAP_REVBITS_04 << 8)) +#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (OMAP_REVBITS_05 << 8)) + +#define OMAP363X_CLASS 0x36300034 +#define OMAP3630_REV_ES1_0 OMAP363X_CLASS +#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (OMAP_REVBITS_01 << 8)) +#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (OMAP_REVBITS_02 << 8)) #define OMAP35XX_CLASS 0x35000034 #define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8)) @@ -390,7 +390,8 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8)) #define OMAP443X_CLASS 0x44300044 -#define OMAP4430_REV_ES1_0 0x44300044 +#define OMAP4430_REV_ES1_0 OMAP443X_CLASS +#define OMAP4430_REV_ES2_0 0x44301044 /* * omap_chip bits @@ -417,10 +418,12 @@ IS_OMAP_TYPE(3517, 0x3517) #define CHIP_IS_OMAP4430ES1 (1 << 8) #define CHIP_IS_OMAP3630ES1_1 (1 << 9) #define CHIP_IS_OMAP3630ES1_2 (1 << 10) +#define CHIP_IS_OMAP4430ES2 (1 << 11) #define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) -#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1) +#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \ + CHIP_IS_OMAP4430ES2) /* * "GE" here represents "greater than or equal to" in terms of ES diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index af3a039..0cce4ca 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -319,6 +319,8 @@ #define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ #define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ +#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ +#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ /*----------------------------------------------------------------------------*/ #define OMAP1_DMA_TOUT_IRQ (1 << 0) @@ -335,6 +337,10 @@ #define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) #define OMAP_DMA_CCR_EN (1 << 7) +#define OMAP_DMA_CCR_RD_ACTIVE (1 << 9) +#define OMAP_DMA_CCR_WR_ACTIVE (1 << 10) +#define OMAP_DMA_CCR_SEL_SRC_DST_SYNC (1 << 24) +#define OMAP_DMA_CCR_BUFFERING_DISABLE (1 << 25) #define OMAP_DMA_DATA_TYPE_S8 0x00 #define OMAP_DMA_DATA_TYPE_S16 0x01 diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 20f1054..dfa3aff 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -45,6 +45,8 @@ #define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 struct omap_dm_timer; +extern struct omap_dm_timer *gptimer_wakeup; +extern struct sys_timer omap_timer; struct clk; int omap_dm_timer_init(void); diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h new file mode 100644 index 0000000..872de0bf --- /dev/null +++ b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h @@ -0,0 +1,35 @@ +/* + * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h + * + * Copyright (C) 2009 Li-Pro.Net + * Stephan Linz <linz@li-pro.net> + * + * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__ + +struct omap_smsc911x_platform_data { + int cs; + int gpio_irq; + int gpio_reset; + u32 flags; +}; + +#if defined(CONFIG_SMSC911X) || \ + defined(CONFIG_SMSC911X_MODULE) + +extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d); + +#else + +static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d) +{ +} + +#endif +#endif diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h index 87f6bf2..36a0bef 100644 --- a/arch/arm/plat-omap/include/plat/i2c.h +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -18,6 +18,8 @@ * 02110-1301 USA * */ +#ifndef __ASM__ARCH_OMAP_I2C_H +#define __ASM__ARCH_OMAP_I2C_H #include <linux/i2c.h> @@ -36,3 +38,5 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, void __init omap1_i2c_mux_pins(int bus_id); void __init omap2_i2c_mux_pins(int bus_id); + +#endif /* __ASM__ARCH_OMAP_I2C_H */ diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index c01d9f0..65e20a6 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -345,6 +345,8 @@ #define INT_34XX_MMC3_IRQ 94 #define INT_34XX_GPT12_IRQ 95 +#define INT_36XX_UART4_IRQ 80 + #define INT_35XX_HECC0_IRQ 24 #define INT_35XX_HECC1_IRQ 28 #define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67 diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 5b20103..b87d83c 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -319,6 +319,18 @@ static struct platform_device omap_mcbsp##port_nr = { \ #define RFSREN 0x0002 #define RSYNCERREN 0x0001 +/* CLKR signal muxing options */ +#define CLKR_SRC_CLKR 0 +#define CLKR_SRC_CLKX 1 + +/* FSR signal muxing options */ +#define FSR_SRC_FSR 0 +#define FSR_SRC_FSX 1 + +/* McBSP functional clock sources */ +#define MCBSP_CLKS_PRCM_SRC 0 +#define MCBSP_CLKS_PAD_SRC 1 + /* we don't do multichannel for now */ struct omap_mcbsp_reg_cfg { u16 spcr2; @@ -405,6 +417,7 @@ struct omap_mcbsp_spi_cfg { struct omap_mcbsp_ops { void (*request)(unsigned int); void (*free)(unsigned int); + int (*set_clks_src)(u8, u8); }; struct omap_mcbsp_platform_data { @@ -471,6 +484,9 @@ struct omap_mcbsp { extern struct omap_mcbsp **mcbsp_ptr; extern int omap_mcbsp_count, omap_mcbsp_cache_size; +#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count) +#define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; + int omap_mcbsp_init(void); void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, int size); @@ -509,6 +525,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word); int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word); +/* McBSP functional clock source changing function */ +extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id); /* SPI specific API */ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg); @@ -517,6 +535,10 @@ int omap_mcbsp_pollread(unsigned int id, u16 * buf); int omap_mcbsp_pollwrite(unsigned int id, u16 buf); int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type); +/* McBSP signal muxing API */ +void omap2_mcbsp1_mux_clkr_src(u8 mux); +void omap2_mcbsp1_mux_fsr_src(u8 mux); + #ifdef CONFIG_ARCH_OMAP3 /* Sidetone specific API */ int omap_st_set_chgain(unsigned int id, int channel, s16 chgain); diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index 9b89ec6..f57f36a 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -71,12 +71,17 @@ struct omap_mmc_platform_data { u64 dma_mask; + /* Register offset deviation */ + u16 reg_offset; + struct omap_mmc_slot_data { - /* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC; - * 8 wire signaling is also optional, and is used with HSMMC + /* + * 4/8 wires and any additional host capabilities + * need to OR'd all capabilities (ref. linux/mmc/host.h) */ - u8 wires; + u8 wires; /* Used for the MMC driver on omap1 and 2420 */ + u32 caps; /* Used for the MMC driver on 2430 and later */ /* * nomux means "standard" muxing is wrong on this board, and @@ -104,6 +109,7 @@ struct omap_mmc_platform_data { /* we can put the features above into this variable */ #define HSMMC_HAS_PBIAS (1 << 0) +#define HSMMC_HAS_UPDATED_RESET (1 << 1) unsigned features; int switch_pin; /* gpio (card detect) */ diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h new file mode 100644 index 0000000..c8dae02 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -0,0 +1,128 @@ +/* + * Driver for OMAP-UART controller. + * Based on drivers/serial/8250.c + * + * Copyright (C) 2010 Texas Instruments. + * + * Authors: + * Govindraj R <govindraj.raja@ti.com> + * Thara Gopinath <thara@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __OMAP_SERIAL_H__ +#define __OMAP_SERIAL_H__ + +#include <linux/serial_core.h> +#include <linux/platform_device.h> + +#include <plat/mux.h> + +#define DRIVER_NAME "omap-hsuart" + +/* + * Use tty device name as ttyO, [O -> OMAP] + * in bootargs we specify as console=ttyO0 if uart1 + * is used as console uart. + */ +#define OMAP_SERIAL_NAME "ttyO" + +#define OMAP_MDR1_DISABLE 0x07 +#define OMAP_MDR1_MODE13X 0x03 +#define OMAP_MDR1_MODE16X 0x00 +#define OMAP_MODE13X_SPEED 230400 + +/* + * LCR = 0XBF: Switch to Configuration Mode B. + * In configuration mode b allow access + * to EFR,DLL,DLH. + * Reference OMAP TRM Chapter 17 + * Section: 1.4.3 Mode Selection + */ +#define OMAP_UART_LCR_CONF_MDB 0XBF + +/* WER = 0x7F + * Enable module level wakeup in WER reg + */ +#define OMAP_UART_WER_MOD_WKUP 0X7F + +/* Enable XON/XOFF flow control on output */ +#define OMAP_UART_SW_TX 0x04 + +/* Enable XON/XOFF flow control on input */ +#define OMAP_UART_SW_RX 0x04 + +#define OMAP_UART_SYSC_RESET 0X07 +#define OMAP_UART_TCR_TRIG 0X0F +#define OMAP_UART_SW_CLR 0XF0 +#define OMAP_UART_FIFO_CLR 0X06 + +#define OMAP_UART_DMA_CH_FREE -1 + +#define RX_TIMEOUT (3 * HZ) +#define OMAP_MAX_HSUART_PORTS 4 + +#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA + +struct omap_uart_port_info { + bool dma_enabled; /* To specify DMA Mode */ + unsigned int uartclk; /* UART clock rate */ + void __iomem *membase; /* ioremap cookie or NULL */ + resource_size_t mapbase; /* resource base */ + unsigned long irqflags; /* request_irq flags */ + upf_t flags; /* UPF_* flags */ +}; + +struct uart_omap_dma { + u8 uart_dma_tx; + u8 uart_dma_rx; + int rx_dma_channel; + int tx_dma_channel; + dma_addr_t rx_buf_dma_phys; + dma_addr_t tx_buf_dma_phys; + unsigned int uart_base; + /* + * Buffer for rx dma.It is not required for tx because the buffer + * comes from port structure. + */ + unsigned char *rx_buf; + unsigned int prev_rx_dma_pos; + int tx_buf_size; + int tx_dma_used; + int rx_dma_used; + spinlock_t tx_lock; + spinlock_t rx_lock; + /* timer to poll activity on rx dma */ + struct timer_list rx_timer; + int rx_buf_size; + int rx_timeout; +}; + +struct uart_omap_port { + struct uart_port port; + struct uart_omap_dma uart_dma; + struct platform_device *pdev; + + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned char fcr; + unsigned char efr; + + int use_dma; + /* + * Some bits in registers are cleared on a read, so they must + * be saved whenever the register is read but the bits will not + * be immediately processed. + */ + unsigned int lsr_break_flag; + unsigned char msr_saved_flags; + char name[20]; + unsigned long port_activity; +}; + +#endif /* __OMAP_SERIAL_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h index 7055672..92df9e2 100644 --- a/arch/arm/plat-omap/include/plat/omap24xx.h +++ b/arch/arm/plat-omap/include/plat/omap24xx.h @@ -40,7 +40,7 @@ #define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) #define OMAP24XX_IVA_INTC_BASE 0x40000000 -#define OMAP2420_CTRL_BASE L4_24XX_BASE +#define OMAP242X_CTRL_BASE L4_24XX_BASE #define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) #define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000) #define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000) diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 25cd9ac..28e2d1a 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -36,6 +36,8 @@ #include <plat/omap_hwmod.h> +extern struct device omap_device_parent; + /* omap_device._state values */ #define OMAP_DEVICE_STATE_UNKNOWN 0 #define OMAP_DEVICE_STATE_ENABLED 1 @@ -62,7 +64,6 @@ * */ struct omap_device { - u32 magic; struct platform_device pdev; struct omap_hwmod **hwmods; struct omap_device_pm_latency *pm_lats; @@ -82,7 +83,6 @@ int omap_device_shutdown(struct platform_device *pdev); /* Core code interface */ -bool omap_device_is_valid(struct omap_device *od); int omap_device_count_resources(struct omap_device *od); int omap_device_fill_resources(struct omap_device *od, struct resource *res); diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index a4e508d..7eaa8ed 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -14,19 +14,16 @@ * * These headers and macros are used to define OMAP on-chip module * data and their integration with other OMAP modules and Linux. - * - * References: - * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064) - * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090) - * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108) - * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140) - * - Open Core Protocol Specification 2.2 + * Copious documentation and references can also be found in the + * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this + * writing). * * To do: * - add interconnect error log structures * - add pinmuxing * - init_conn_id_bit (CONNID_BIT_VECTOR) * - implement default hwmod SMS/SDRC flags? + * - remove unused fields * */ #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H @@ -35,6 +32,7 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/ioport.h> +#include <linux/mutex.h> #include <plat/cpu.h> struct omap_device; @@ -96,7 +94,7 @@ struct omap_hwmod_irq_info { /** * struct omap_hwmod_dma_info - DMA channels used by the hwmod * @name: name of the DMA channel (module local name) - * @dma_ch: DMA channel ID + * @dma_req: DMA request ID * * @name should be something short, e.g., "tx" or "rx". It is for use * by platform_get_resource_byname(). It is defined locally to the @@ -104,7 +102,20 @@ struct omap_hwmod_irq_info { */ struct omap_hwmod_dma_info { const char *name; - u16 dma_ch; + u16 dma_req; +}; + +/** + * struct omap_hwmod_rst_info - IPs reset lines use by hwmod + * @name: name of the reset line (module local name) + * @rst_shift: Offset of the reset bit + * + * @name should be something short, e.g., "cpu0" or "rst". It is defined + * locally to the hwmod. + */ +struct omap_hwmod_rst_info { + const char *name; + u8 rst_shift; }; /** @@ -237,8 +248,9 @@ struct omap_hwmod_ocp_if { #define SYSC_HAS_CLOCKACTIVITY (1 << 4) #define SYSC_HAS_SIDLEMODE (1 << 5) #define SYSC_HAS_MIDLEMODE (1 << 6) -#define SYSS_MISSING (1 << 7) +#define SYSS_HAS_RESET_STATUS (1 << 7) #define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */ +#define SYSC_HAS_RESET_STATUS (1 << 9) /* omap_hwmod_sysconfig.clockact flags */ #define CLOCKACT_TEST_BOTH 0x0 @@ -327,10 +339,12 @@ struct omap_hwmod_omap2_prcm { /** * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data * @clkctrl_reg: PRCM address of the clock control register + * @rstctrl_reg: adress of the XXX_RSTCTRL register located in the PRM * @submodule_wkdep_bit: bit shift of the WKDEP range */ struct omap_hwmod_omap4_prcm { void __iomem *clkctrl_reg; + void __iomem *rstctrl_reg; u8 submodule_wkdep_bit; }; @@ -352,6 +366,11 @@ struct omap_hwmod_omap4_prcm { * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup * HWMOD_NO_IDLEST : this module does not have idle status - this is the case * only for few initiator modules on OMAP2 & 3. + * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset. + * This is needed for devices like DSS that require optional clocks enabled + * in order to complete the reset. Optional clocks will be disabled + * again after the reset. + * HWMOD_16BIT_REG: Module has 16bit registers */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -360,6 +379,8 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_NO_OCP_AUTOIDLE (1 << 4) #define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5) #define HWMOD_NO_IDLEST (1 << 6) +#define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7) +#define HWMOD_16BIT_REG (1 << 8) /* * omap_hwmod._int_flags definitions @@ -410,7 +431,7 @@ struct omap_hwmod_class { * @class: struct omap_hwmod_class * to the class of this hwmod * @od: struct omap_device currently associated with this hwmod (internal use) * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt) - * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt) + * @sdma_reqs: ptr to an array of System DMA request IDs (see sdma_reqs_cnt) * @prcm: PRCM data pertaining to this hwmod * @main_clk: main clock: OMAP clock name * @_clk: pointer to the main struct clk (filled in at runtime) @@ -424,7 +445,7 @@ struct omap_hwmod_class { * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6) * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift * @mpu_irqs_cnt: number of @mpu_irqs - * @sdma_chs_cnt: number of @sdma_chs + * @sdma_reqs_cnt: number of @sdma_reqs * @opt_clks_cnt: number of @opt_clks * @master_cnt: number of @master entries * @slaves_cnt: number of @slave entries @@ -433,6 +454,7 @@ struct omap_hwmod_class { * @_state: internal-use hwmod state * @flags: hwmod flags (documented below) * @omap_chip: OMAP chips this hwmod is present on + * @_mutex: mutex serializing operations on this hwmod * @node: list node for hwmod list (internal use) * * @main_clk refers to this module's "main clock," which for our @@ -448,7 +470,8 @@ struct omap_hwmod { struct omap_hwmod_class *class; struct omap_device *od; struct omap_hwmod_irq_info *mpu_irqs; - struct omap_hwmod_dma_info *sdma_chs; + struct omap_hwmod_dma_info *sdma_reqs; + struct omap_hwmod_rst_info *rst_lines; union { struct omap_hwmod_omap2_prcm omap2; struct omap_hwmod_omap4_prcm omap4; @@ -461,6 +484,7 @@ struct omap_hwmod { void *dev_attr; u32 _sysc_cache; void __iomem *_mpu_rt_va; + struct mutex _mutex; struct list_head node; u16 flags; u8 _mpu_port_index; @@ -468,7 +492,8 @@ struct omap_hwmod { u8 msuspendmux_shift; u8 response_lat; u8 mpu_irqs_cnt; - u8 sdma_chs_cnt; + u8 sdma_reqs_cnt; + u8 rst_lines_cnt; u8 opt_clks_cnt; u8 masters_cnt; u8 slaves_cnt; @@ -492,6 +517,10 @@ int omap_hwmod_idle(struct omap_hwmod *oh); int _omap_hwmod_idle(struct omap_hwmod *oh); int omap_hwmod_shutdown(struct omap_hwmod *oh); +int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name); +int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name); +int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); + int omap_hwmod_enable_clocks(struct omap_hwmod *oh); int omap_hwmod_disable_clocks(struct omap_hwmod *oh); @@ -500,8 +529,8 @@ int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode); int omap_hwmod_reset(struct omap_hwmod *oh); void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); -void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs); -u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs); +void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs); +u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs); int omap_hwmod_count_resources(struct omap_hwmod *oh); int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); @@ -534,5 +563,6 @@ int omap_hwmod_for_each_by_class(const char *classname, extern int omap2420_hwmod_init(void); extern int omap2430_hwmod_init(void); extern int omap3xxx_hwmod_init(void); +extern int omap44xx_hwmod_init(void); #endif diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h index fb6ec74..9ca420d 100644 --- a/arch/arm/plat-omap/include/plat/powerdomain.h +++ b/arch/arm/plat-omap/include/plat/powerdomain.h @@ -32,6 +32,7 @@ /* Powerdomain allowable state bitfields */ #define PWRSTS_ON (1 << PWRDM_POWER_ON) +#define PWRSTS_OFF (1 << PWRDM_POWER_OFF) #define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \ (1 << PWRDM_POWER_ON)) @@ -161,5 +162,6 @@ int pwrdm_state_switch(struct powerdomain *pwrdm); int pwrdm_clkdm_state_switch(struct clockdomain *clkdm); int pwrdm_pre_transition(void); int pwrdm_post_transition(void); +int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm); #endif diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h index 9fbd914..ab77442 100644 --- a/arch/arm/plat-omap/include/plat/prcm.h +++ b/arch/arm/plat-omap/include/plat/prcm.h @@ -38,6 +38,8 @@ u32 prm_read_mod_reg(s16 module, u16 idx); void prm_write_mod_reg(u32 val, s16 module, u16 idx); u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx); u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask); +u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask); +u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg); u32 cm_read_mod_reg(s16 module, u16 idx); void cm_write_mod_reg(u32 val, s16 module, u16 idx); u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx); diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index 7b76f50..efd87c8 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -147,6 +147,7 @@ struct memory_timings { }; extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); +struct omap_sdrc_params *rx51_get_sdram_timings(void); u32 omap2xxx_sdrc_dll_is_unlocked(void); u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 16a1b45..5905100 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -11,7 +11,6 @@ #ifndef __ARCH_ARM_OMAP_SRAM_H #define __ARCH_ARM_OMAP_SRAM_H -extern int __init omap_sram_init(void); extern void * omap_sram_push(void * start, unsigned long size); extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); diff --git a/arch/arm/plat-omap/include/plat/timer-gp.h b/arch/arm/plat-omap/include/plat/timer-gp.h deleted file mode 100644 index c88d346..0000000 --- a/arch/arm/plat-omap/include/plat/timer-gp.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * OMAP2/3 GPTIMER support.headers - * - * Copyright (C) 2009 Nokia Corporation - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H - -int __init omap2_gp_clockevent_set_gptimer(u8 id); - -#endif - diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index ddf723b..9036e37 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -139,10 +139,14 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP2(1, omap3evm); DEBUG_LL_OMAP3(1, omap_3430sdp); DEBUG_LL_OMAP3(1, omap_3630sdp); + DEBUG_LL_OMAP3(1, omap3530_lv_som); + DEBUG_LL_OMAP3(1, omap3_torpedo); /* omap3 based boards using UART3 */ DEBUG_LL_OMAP3(3, cm_t35); + DEBUG_LL_OMAP3(3, cm_t3517); DEBUG_LL_OMAP3(3, igep0020); + DEBUG_LL_OMAP3(3, igep0030); DEBUG_LL_OMAP3(3, nokia_rx51); DEBUG_LL_OMAP3(3, omap3517evm); DEBUG_LL_OMAP3(3, omap3_beagle); @@ -153,6 +157,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* omap4 based boards using UART3 */ DEBUG_LL_OMAP4(3, omap_4430sdp); + DEBUG_LL_OMAP4(3, omap4_panda); /* zoom2/3 external uart */ DEBUG_LL_ZOOM(omap_zoom2); diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 9feddac..59c7fe7 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -105,7 +105,7 @@ static inline void omap1_usb_init(struct omap_usb_config *pdata) #if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE) void omap2_usbfs_init(struct omap_usb_config *pdata); #else -static inline omap2_usbfs_init(struct omap_usb_config *pdata) +static inline void omap2_usbfs_init(struct omap_usb_config *pdata) { } #endif |
