diff options
Diffstat (limited to 'arch/arm/plat-omap/gpio.c')
| -rw-r--r-- | arch/arm/plat-omap/gpio.c | 549 |
1 files changed, 301 insertions, 248 deletions
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 7c345b7..055160e 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -31,7 +31,7 @@ /* * OMAP1510 GPIO registers */ -#define OMAP1510_GPIO_BASE OMAP1_IO_ADDRESS(0xfffce000) +#define OMAP1510_GPIO_BASE 0xfffce000 #define OMAP1510_GPIO_DATA_INPUT 0x00 #define OMAP1510_GPIO_DATA_OUTPUT 0x04 #define OMAP1510_GPIO_DIR_CONTROL 0x08 @@ -45,10 +45,10 @@ /* * OMAP1610 specific GPIO registers */ -#define OMAP1610_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbe400) -#define OMAP1610_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbec00) -#define OMAP1610_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbb400) -#define OMAP1610_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbbc00) +#define OMAP1610_GPIO1_BASE 0xfffbe400 +#define OMAP1610_GPIO2_BASE 0xfffbec00 +#define OMAP1610_GPIO3_BASE 0xfffbb400 +#define OMAP1610_GPIO4_BASE 0xfffbbc00 #define OMAP1610_GPIO_REVISION 0x0000 #define OMAP1610_GPIO_SYSCONFIG 0x0010 #define OMAP1610_GPIO_SYSSTATUS 0x0014 @@ -68,52 +68,36 @@ #define OMAP1610_GPIO_SET_DATAOUT 0x00f0 /* - * OMAP730 specific GPIO registers + * OMAP7XX specific GPIO registers */ -#define OMAP730_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) -#define OMAP730_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) -#define OMAP730_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) -#define OMAP730_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) -#define OMAP730_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) -#define OMAP730_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) -#define OMAP730_GPIO_DATA_INPUT 0x00 -#define OMAP730_GPIO_DATA_OUTPUT 0x04 -#define OMAP730_GPIO_DIR_CONTROL 0x08 -#define OMAP730_GPIO_INT_CONTROL 0x0c -#define OMAP730_GPIO_INT_MASK 0x10 -#define OMAP730_GPIO_INT_STATUS 0x14 - -/* - * OMAP850 specific GPIO registers - */ -#define OMAP850_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) -#define OMAP850_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) -#define OMAP850_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) -#define OMAP850_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) -#define OMAP850_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) -#define OMAP850_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) -#define OMAP850_GPIO_DATA_INPUT 0x00 -#define OMAP850_GPIO_DATA_OUTPUT 0x04 -#define OMAP850_GPIO_DIR_CONTROL 0x08 -#define OMAP850_GPIO_INT_CONTROL 0x0c -#define OMAP850_GPIO_INT_MASK 0x10 -#define OMAP850_GPIO_INT_STATUS 0x14 - -#define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE) +#define OMAP7XX_GPIO1_BASE 0xfffbc000 +#define OMAP7XX_GPIO2_BASE 0xfffbc800 +#define OMAP7XX_GPIO3_BASE 0xfffbd000 +#define OMAP7XX_GPIO4_BASE 0xfffbd800 +#define OMAP7XX_GPIO5_BASE 0xfffbe000 +#define OMAP7XX_GPIO6_BASE 0xfffbe800 +#define OMAP7XX_GPIO_DATA_INPUT 0x00 +#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 +#define OMAP7XX_GPIO_DIR_CONTROL 0x08 +#define OMAP7XX_GPIO_INT_CONTROL 0x0c +#define OMAP7XX_GPIO_INT_MASK 0x10 +#define OMAP7XX_GPIO_INT_STATUS 0x14 + +#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE /* * omap24xx specific GPIO registers */ -#define OMAP242X_GPIO1_BASE OMAP2_IO_ADDRESS(0x48018000) -#define OMAP242X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4801a000) -#define OMAP242X_GPIO3_BASE OMAP2_IO_ADDRESS(0x4801c000) -#define OMAP242X_GPIO4_BASE OMAP2_IO_ADDRESS(0x4801e000) +#define OMAP242X_GPIO1_BASE 0x48018000 +#define OMAP242X_GPIO2_BASE 0x4801a000 +#define OMAP242X_GPIO3_BASE 0x4801c000 +#define OMAP242X_GPIO4_BASE 0x4801e000 -#define OMAP243X_GPIO1_BASE OMAP2_IO_ADDRESS(0x4900C000) -#define OMAP243X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4900E000) -#define OMAP243X_GPIO3_BASE OMAP2_IO_ADDRESS(0x49010000) -#define OMAP243X_GPIO4_BASE OMAP2_IO_ADDRESS(0x49012000) -#define OMAP243X_GPIO5_BASE OMAP2_IO_ADDRESS(0x480B6000) +#define OMAP243X_GPIO1_BASE 0x4900C000 +#define OMAP243X_GPIO2_BASE 0x4900E000 +#define OMAP243X_GPIO3_BASE 0x49010000 +#define OMAP243X_GPIO4_BASE 0x49012000 +#define OMAP243X_GPIO5_BASE 0x480B6000 #define OMAP24XX_GPIO_REVISION 0x0000 #define OMAP24XX_GPIO_SYSCONFIG 0x0010 @@ -170,24 +154,25 @@ * omap34xx specific GPIO registers */ -#define OMAP34XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x48310000) -#define OMAP34XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x49050000) -#define OMAP34XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x49052000) -#define OMAP34XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x49054000) -#define OMAP34XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x49056000) -#define OMAP34XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x49058000) +#define OMAP34XX_GPIO1_BASE 0x48310000 +#define OMAP34XX_GPIO2_BASE 0x49050000 +#define OMAP34XX_GPIO3_BASE 0x49052000 +#define OMAP34XX_GPIO4_BASE 0x49054000 +#define OMAP34XX_GPIO5_BASE 0x49056000 +#define OMAP34XX_GPIO6_BASE 0x49058000 /* * OMAP44XX specific GPIO registers */ -#define OMAP44XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x4a310000) -#define OMAP44XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x48055000) -#define OMAP44XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x48057000) -#define OMAP44XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x48059000) -#define OMAP44XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x4805B000) -#define OMAP44XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x4805D000) +#define OMAP44XX_GPIO1_BASE 0x4a310000 +#define OMAP44XX_GPIO2_BASE 0x48055000 +#define OMAP44XX_GPIO3_BASE 0x48057000 +#define OMAP44XX_GPIO4_BASE 0x48059000 +#define OMAP44XX_GPIO5_BASE 0x4805B000 +#define OMAP44XX_GPIO6_BASE 0x4805D000 struct gpio_bank { + unsigned long pbase; void __iomem *base; u16 irq; u16 virtual_irq_start; @@ -210,101 +195,134 @@ struct gpio_bank { spinlock_t lock; struct gpio_chip chip; struct clk *dbck; + u32 mod_usage; }; #define METHOD_MPUIO 0 #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 -#define METHOD_GPIO_730 3 -#define METHOD_GPIO_850 4 +#define METHOD_GPIO_7XX 3 #define METHOD_GPIO_24XX 5 #ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { - { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, - { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 }, - { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 }, - { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 }, - { OMAP1610_GPIO4_BASE, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, METHOD_GPIO_1610 }, + { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE, + METHOD_MPUIO }, + { OMAP1610_GPIO1_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_1610 }, + { OMAP1610_GPIO2_BASE, NULL, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, + METHOD_GPIO_1610 }, + { OMAP1610_GPIO3_BASE, NULL, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, + METHOD_GPIO_1610 }, + { OMAP1610_GPIO4_BASE, NULL, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, + METHOD_GPIO_1610 }, }; #endif #ifdef CONFIG_ARCH_OMAP15XX static struct gpio_bank gpio_bank_1510[2] = { - { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 } -}; -#endif - -#ifdef CONFIG_ARCH_OMAP730 -static struct gpio_bank gpio_bank_730[7] = { - { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, - { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, - { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, - { OMAP730_GPIO4_BASE, INT_730_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 }, - { OMAP730_GPIO5_BASE, INT_730_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 }, - { OMAP730_GPIO6_BASE, INT_730_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 }, + { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE, + METHOD_MPUIO }, + { OMAP1510_GPIO_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_1510 } }; #endif -#ifdef CONFIG_ARCH_OMAP850 -static struct gpio_bank gpio_bank_850[7] = { - { OMAP1_MPUIO_VBASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 }, - { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 }, - { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 }, - { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 }, - { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 }, - { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 }, +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +static struct gpio_bank gpio_bank_7xx[7] = { + { OMAP1_MPUIO_VBASE, NULL, INT_7XX_MPUIO, IH_MPUIO_BASE, + METHOD_MPUIO }, + { OMAP7XX_GPIO1_BASE, NULL, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO2_BASE, NULL, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO3_BASE, NULL, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO4_BASE, NULL, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO5_BASE, NULL, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO6_BASE, NULL, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160, + METHOD_GPIO_7XX }, }; #endif - #ifdef CONFIG_ARCH_OMAP24XX static struct gpio_bank gpio_bank_242x[4] = { - { OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, + { OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_24XX }, + { OMAP242X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_24XX }, + { OMAP242X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_24XX }, + { OMAP242X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_24XX }, }; static struct gpio_bank gpio_bank_243x[5] = { - { OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, - { OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, + { OMAP243X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO5_BASE, NULL, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, + METHOD_GPIO_24XX }, }; #endif #ifdef CONFIG_ARCH_OMAP34XX static struct gpio_bank gpio_bank_34xx[6] = { - { OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX }, + { OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO2_BASE, NULL, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO3_BASE, NULL, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO4_BASE, NULL, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO5_BASE, NULL, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO6_BASE, NULL, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, + METHOD_GPIO_24XX }, }; +struct omap3_gpio_regs { + u32 sysconfig; + u32 irqenable1; + u32 irqenable2; + u32 wake_en; + u32 ctrl; + u32 oe; + u32 leveldetect0; + u32 leveldetect1; + u32 risingdetect; + u32 fallingdetect; + u32 dataout; + u32 setwkuena; + u32 setdataout; +}; + +static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; #endif #ifdef CONFIG_ARCH_OMAP4 static struct gpio_bank gpio_bank_44xx[6] = { - { OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, \ + { OMAP44XX_GPIO1_BASE, NULL, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, \ + { OMAP44XX_GPIO2_BASE, NULL, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, \ + { OMAP44XX_GPIO3_BASE, NULL, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, \ + { OMAP44XX_GPIO4_BASE, NULL, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \ + { OMAP44XX_GPIO5_BASE, NULL, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \ + { OMAP44XX_GPIO6_BASE, NULL, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX }, }; @@ -402,14 +420,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP1610_GPIO_DIRECTION; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -469,19 +482,9 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l = 1 << gpio; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_OUTPUT; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; l = __raw_readl(reg); if (enable) l |= 1 << gpio; @@ -537,14 +540,9 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio) reg += OMAP1610_GPIO_DATAIN; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_INPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_INPUT; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_INPUT; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -588,14 +586,9 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) reg += OMAP1610_GPIO_DATAOUT; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_OUTPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_OUTPUT; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ @@ -636,6 +629,10 @@ void omap_set_gpio_debounce(int gpio, int enable) #else reg += OMAP24XX_GPIO_DEBOUNCE_EN; #endif + if (!(bank->mod_usage & l)) { + printk(KERN_ERR "GPIO %d not requested\n", gpio); + return; + } spin_lock_irqsave(&bank->lock, flags); val = __raw_readl(reg); @@ -671,6 +668,11 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time) bank = get_gpio_bank(gpio); reg = bank->base; + if (!bank->mod_usage) { + printk(KERN_ERR "GPIO not requested\n"); + return; + } + enc_time &= 0xff; #ifdef CONFIG_ARCH_OMAP4 reg += OMAP4_GPIO_DEBOUNCINGTIME; @@ -797,21 +799,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_CONTROL; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_CONTROL; l = __raw_readl(reg); if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; @@ -897,14 +887,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP1610_GPIO_IRQSTATUS1; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_STATUS; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_STATUS; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_STATUS; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -971,16 +956,9 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) mask = 0xffff; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_MASK; - mask = 0xffffffff; - inv = 1; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_MASK; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; mask = 0xffffffff; inv = 1; break; @@ -1044,19 +1022,9 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l = gpio_mask; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_MASK; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_MASK; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; l = __raw_readl(reg); if (enable) l &= ~(gpio_mask); @@ -1186,6 +1154,16 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) __raw_writel(__raw_readl(reg) | (1 << offset), reg); } #endif + if (!cpu_class_is_omap1()) { + if (!bank->mod_usage) { + u32 ctrl; + ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); + ctrl &= 0xFFFFFFFE; + /* Module is enabled, clocks are not gated */ + __raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL); + } + bank->mod_usage |= 1 << offset; + } spin_unlock_irqrestore(&bank->lock, flags); return 0; @@ -1212,6 +1190,16 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) __raw_writel(1 << offset, reg); } #endif + if (!cpu_class_is_omap1()) { + bank->mod_usage &= ~(1 << offset); + if (!bank->mod_usage) { + u32 ctrl; + ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); + /* Module is disabled, clocks are gated */ + ctrl |= 1; + __raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL); + } + } _reset_gpio(bank, bank->chip.base + offset); spin_unlock_irqrestore(&bank->lock, flags); } @@ -1249,13 +1237,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_1610) isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; #endif -#ifdef CONFIG_ARCH_OMAP730 - if (bank->method == METHOD_GPIO_730) - isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; -#endif -#ifdef CONFIG_ARCH_OMAP850 - if (bank->method == METHOD_GPIO_850) - isr_reg = bank->base + OMAP850_GPIO_INT_STATUS; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (bank->method == METHOD_GPIO_7XX) + isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) @@ -1524,11 +1508,8 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) case METHOD_GPIO_1610: reg += OMAP1610_GPIO_DIRECTION; break; - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; break; case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; @@ -1607,6 +1588,23 @@ static struct clk * gpio5_fck; static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS]; #endif +static void __init omap_gpio_show_rev(void) +{ + u32 rev; + + if (cpu_is_omap16xx()) + rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); + else if (cpu_is_omap24xx() || cpu_is_omap34xx()) + rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + else if (cpu_is_omap44xx()) + rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION); + else + return; + + printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", + (rev >> 4) & 0x0f, rev & 0x0f); +} + /* This lock class tells lockdep that GPIO irqs are in a different * category than their parents, so it won't report false recursion. */ @@ -1617,6 +1615,7 @@ static int __init _omap_gpio_init(void) int i; int gpio = 0; struct gpio_bank *bank; + int bank_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ char clk_name[11]; initialized = 1; @@ -1679,77 +1678,45 @@ static int __init _omap_gpio_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { - printk(KERN_INFO "OMAP1510 GPIO hardware\n"); gpio_bank_count = 2; gpio_bank = gpio_bank_1510; + bank_size = SZ_2K; } #endif #if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { - u32 rev; - gpio_bank_count = 5; gpio_bank = gpio_bank_1610; - rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); - printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); + bank_size = SZ_2K; } #endif -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { - printk(KERN_INFO "OMAP730 GPIO hardware\n"); - gpio_bank_count = 7; - gpio_bank = gpio_bank_730; - } -#endif -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - printk(KERN_INFO "OMAP850 GPIO hardware\n"); +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { gpio_bank_count = 7; - gpio_bank = gpio_bank_850; + gpio_bank = gpio_bank_7xx; + bank_size = SZ_2K; } #endif - #ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap242x()) { - int rev; - gpio_bank_count = 4; gpio_bank = gpio_bank_242x; - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); - printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } if (cpu_is_omap243x()) { - int rev; - gpio_bank_count = 5; gpio_bank = gpio_bank_243x; - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); - printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } #endif #ifdef CONFIG_ARCH_OMAP34XX if (cpu_is_omap34xx()) { - int rev; - gpio_bank_count = OMAP34XX_NR_GPIOS; gpio_bank = gpio_bank_34xx; - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); - printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } #endif #ifdef CONFIG_ARCH_OMAP4 if (cpu_is_omap44xx()) { - int rev; - gpio_bank_count = OMAP34XX_NR_GPIOS; gpio_bank = gpio_bank_44xx; - rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION); - printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } #endif for (i = 0; i < gpio_bank_count; i++) { @@ -1757,6 +1724,14 @@ static int __init _omap_gpio_init(void) bank = &gpio_bank[i]; spin_lock_init(&bank->lock); + + /* Static mapping, never released */ + bank->base = ioremap(bank->pbase, bank_size); + if (!bank->base) { + printk(KERN_ERR "Could not ioremap gpio bank%i\n", i); + continue; + } + if (bank_is_mpuio(bank)) __raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT); if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { @@ -1768,11 +1743,11 @@ static int __init _omap_gpio_init(void) __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); } - if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) { - __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK); - __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS); + if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { + __raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK); + __raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS); - gpio_count = 32; /* 730 has 32-bit GPIOs */ + gpio_count = 32; /* 7xx has 32-bit GPIOs */ } #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ @@ -1804,6 +1779,8 @@ static int __init _omap_gpio_init(void) gpio_count = 32; } #endif + + bank->mod_usage = 0; /* REVISIT eventually switch from OMAP-specific gpio structs * over to the generic ones */ @@ -1862,6 +1839,8 @@ static int __init _omap_gpio_init(void) if (cpu_is_omap34xx()) omap_writel(1 << 0, 0x48306814); + omap_gpio_show_rev(); + return 0; } @@ -2106,6 +2085,81 @@ void omap2_gpio_resume_after_retention(void) #endif +#ifdef CONFIG_ARCH_OMAP34XX +/* save the registers of bank 2-6 */ +void omap_gpio_save_context(void) +{ + int i; + + /* saving banks from 2-6 only since GPIO1 is in WKUP */ + for (i = 1; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + gpio_context[i].sysconfig = + __raw_readl(bank->base + OMAP24XX_GPIO_SYSCONFIG); + gpio_context[i].irqenable1 = + __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1); + gpio_context[i].irqenable2 = + __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2); + gpio_context[i].wake_en = + __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN); + gpio_context[i].ctrl = + __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); + gpio_context[i].oe = + __raw_readl(bank->base + OMAP24XX_GPIO_OE); + gpio_context[i].leveldetect0 = + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); + gpio_context[i].leveldetect1 = + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); + gpio_context[i].risingdetect = + __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); + gpio_context[i].fallingdetect = + __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); + gpio_context[i].dataout = + __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT); + gpio_context[i].setwkuena = + __raw_readl(bank->base + OMAP24XX_GPIO_SETWKUENA); + gpio_context[i].setdataout = + __raw_readl(bank->base + OMAP24XX_GPIO_SETDATAOUT); + } +} + +/* restore the required registers of bank 2-6 */ +void omap_gpio_restore_context(void) +{ + int i; + + for (i = 1; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + __raw_writel(gpio_context[i].sysconfig, + bank->base + OMAP24XX_GPIO_SYSCONFIG); + __raw_writel(gpio_context[i].irqenable1, + bank->base + OMAP24XX_GPIO_IRQENABLE1); + __raw_writel(gpio_context[i].irqenable2, + bank->base + OMAP24XX_GPIO_IRQENABLE2); + __raw_writel(gpio_context[i].wake_en, + bank->base + OMAP24XX_GPIO_WAKE_EN); + __raw_writel(gpio_context[i].ctrl, + bank->base + OMAP24XX_GPIO_CTRL); + __raw_writel(gpio_context[i].oe, + bank->base + OMAP24XX_GPIO_OE); + __raw_writel(gpio_context[i].leveldetect0, + bank->base + OMAP24XX_GPIO_LEVELDETECT0); + __raw_writel(gpio_context[i].leveldetect1, + bank->base + OMAP24XX_GPIO_LEVELDETECT1); + __raw_writel(gpio_context[i].risingdetect, + bank->base + OMAP24XX_GPIO_RISINGDETECT); + __raw_writel(gpio_context[i].fallingdetect, + bank->base + OMAP24XX_GPIO_FALLINGDETECT); + __raw_writel(gpio_context[i].dataout, + bank->base + OMAP24XX_GPIO_DATAOUT); + __raw_writel(gpio_context[i].setwkuena, + bank->base + OMAP24XX_GPIO_SETWKUENA); + __raw_writel(gpio_context[i].setdataout, + bank->base + OMAP24XX_GPIO_SETDATAOUT); + } +} +#endif + /* * This may get called early from board specific init * for boards that have interrupts routed via FPGA. @@ -2160,8 +2214,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) if (bank_is_mpuio(bank)) gpio = OMAP_MPUIO(0); - else if (cpu_class_is_omap2() || cpu_is_omap730() || - cpu_is_omap850()) + else if (cpu_class_is_omap2() || cpu_is_omap7xx()) bankwidth = 32; for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) { |
