diff options
Diffstat (limited to 'arch/arm/mm')
| -rw-r--r-- | arch/arm/mm/Kconfig | 51 | ||||
| -rw-r--r-- | arch/arm/mm/Makefile | 3 | ||||
| -rw-r--r-- | arch/arm/mm/cache-feroceon-l2.c | 1 | ||||
| -rw-r--r-- | arch/arm/mm/cache-l2x0.c | 1498 | ||||
| -rw-r--r-- | arch/arm/mm/cache-v7.S | 12 | ||||
| -rw-r--r-- | arch/arm/mm/dma-mapping.c | 7 | ||||
| -rw-r--r-- | arch/arm/mm/flush.c | 33 | ||||
| -rw-r--r-- | arch/arm/mm/highmem.c | 33 | ||||
| -rw-r--r-- | arch/arm/mm/init.c | 72 | ||||
| -rw-r--r-- | arch/arm/mm/ioremap.c | 9 | ||||
| -rw-r--r-- | arch/arm/mm/l2c-common.c | 20 | ||||
| -rw-r--r-- | arch/arm/mm/l2c-l2x0-resume.S | 58 | ||||
| -rw-r--r-- | arch/arm/mm/mmu.c | 123 | ||||
| -rw-r--r-- | arch/arm/mm/nommu.c | 66 | ||||
| -rw-r--r-- | arch/arm/mm/proc-v7-3level.S | 18 | ||||
| -rw-r--r-- | arch/arm/mm/proc-v7.S | 39 | ||||
| -rw-r--r-- | arch/arm/mm/proc-v7m.S | 8 |
17 files changed, 1360 insertions, 691 deletions
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 5bf7c3c..eda0dd0 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -897,6 +897,57 @@ config CACHE_PL310 This option enables optimisations for the PL310 cache controller. +config PL310_ERRATA_588369 + bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" + depends on CACHE_L2X0 + help + The PL310 L2 cache controller implements three types of Clean & + Invalidate maintenance operations: by Physical Address + (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC). + They are architecturally defined to behave as the execution of a + clean operation followed immediately by an invalidate operation, + both performing to the same memory location. This functionality + is not correctly implemented in PL310 as clean lines are not + invalidated as a result of these operations. + +config PL310_ERRATA_727915 + bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" + depends on CACHE_L2X0 + help + PL310 implements the Clean & Invalidate by Way L2 cache maintenance + operation (offset 0x7FC). This operation runs in background so that + PL310 can handle normal accesses while it is in progress. Under very + rare circumstances, due to this erratum, write data can be lost when + PL310 treats a cacheable write transaction during a Clean & + Invalidate by Way operation. + +config PL310_ERRATA_753970 + bool "PL310 errata: cache sync operation may be faulty" + depends on CACHE_PL310 + help + This option enables the workaround for the 753970 PL310 (r3p0) erratum. + + Under some condition the effect of cache sync operation on + the store buffer still remains when the operation completes. + This means that the store buffer is always asked to drain and + this prevents it from merging any further writes. The workaround + is to replace the normal offset of cache sync operation (0x730) + by another offset targeting an unmapped PL310 register 0x740. + This has the same effect as the cache sync operation: store buffer + drain and waiting for all buffers empty. + +config PL310_ERRATA_769419 + bool "PL310 errata: no automatic Store Buffer drain" + depends on CACHE_L2X0 + help + On revisions of the PL310 prior to r3p2, the Store Buffer does + not automatically drain. This can cause normal, non-cacheable + writes to be retained when the memory system is idle, leading + to suboptimal I/O performance for drivers using coherent DMA. + This option adds a write barrier to the cpu_idle loop so that, + on systems with an outer cache, the store buffer is drained + explicitly. + config CACHE_TAUROS2 bool "Enable the Tauros2 L2 cache controller" depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4) diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 7f39ce2..91da64d 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -95,7 +95,8 @@ obj-$(CONFIG_CPU_V7M) += proc-v7m.o AFLAGS_proc-v6.o :=-Wa,-march=armv6 AFLAGS_proc-v7.o :=-Wa,-march=armv7-a +obj-$(CONFIG_OUTER_CACHE) += l2c-common.o obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o -obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o +obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o l2c-l2x0-resume.o obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index dc814a5..e028a7f 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -350,7 +350,6 @@ void __init feroceon_l2_init(int __l2_wt_override) outer_cache.inv_range = feroceon_l2_inv_range; outer_cache.clean_range = feroceon_l2_clean_range; outer_cache.flush_range = feroceon_l2_flush_range; - outer_cache.inv_all = l2_inv_all; enable_l2(); diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 7abde2c..efc5cab 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -16,18 +16,33 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/cpu.h> #include <linux/err.h> #include <linux/init.h> +#include <linux/smp.h> #include <linux/spinlock.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> +#include <asm/cputype.h> #include <asm/hardware/cache-l2x0.h> #include "cache-tauros3.h" #include "cache-aurora-l2.h" +struct l2c_init_data { + const char *type; + unsigned way_size_0; + unsigned num_lock; + void (*of_parse)(const struct device_node *, u32 *, u32 *); + void (*enable)(void __iomem *, u32, unsigned); + void (*fixup)(void __iomem *, u32, struct outer_cache_fns *); + void (*save)(void __iomem *); + struct outer_cache_fns outer_cache; +}; + #define CACHE_LINE_SIZE 32 static void __iomem *l2x0_base; @@ -36,96 +51,116 @@ static u32 l2x0_way_mask; /* Bitmask of active ways */ static u32 l2x0_size; static unsigned long sync_reg_offset = L2X0_CACHE_SYNC; -/* Aurora don't have the cache ID register available, so we have to - * pass it though the device tree */ -static u32 cache_id_part_number_from_dt; - struct l2x0_regs l2x0_saved_regs; -struct l2x0_of_data { - void (*setup)(const struct device_node *, u32 *, u32 *); - void (*save)(void); - struct outer_cache_fns outer_cache; -}; - -static bool of_init = false; - -static inline void cache_wait_way(void __iomem *reg, unsigned long mask) +/* + * Common code for all cache controllers. + */ +static inline void l2c_wait_mask(void __iomem *reg, unsigned long mask) { /* wait for cache operation by line or way to complete */ while (readl_relaxed(reg) & mask) cpu_relax(); } -#ifdef CONFIG_CACHE_PL310 -static inline void cache_wait(void __iomem *reg, unsigned long mask) +/* + * By default, we write directly to secure registers. Platforms must + * override this if they are running non-secure. + */ +static void l2c_write_sec(unsigned long val, void __iomem *base, unsigned reg) { - /* cache operations by line are atomic on PL310 */ + if (val == readl_relaxed(base + reg)) + return; + if (outer_cache.write_sec) + outer_cache.write_sec(val, reg); + else + writel_relaxed(val, base + reg); } -#else -#define cache_wait cache_wait_way -#endif -static inline void cache_sync(void) +/* + * This should only be called when we have a requirement that the + * register be written due to a work-around, as platforms running + * in non-secure mode may not be able to access this register. + */ +static inline void l2c_set_debug(void __iomem *base, unsigned long val) { - void __iomem *base = l2x0_base; - - writel_relaxed(0, base + sync_reg_offset); - cache_wait(base + L2X0_CACHE_SYNC, 1); + l2c_write_sec(val, base, L2X0_DEBUG_CTRL); } -static inline void l2x0_clean_line(unsigned long addr) +static void __l2c_op_way(void __iomem *reg) { - void __iomem *base = l2x0_base; - cache_wait(base + L2X0_CLEAN_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(l2x0_way_mask, reg); + l2c_wait_mask(reg, l2x0_way_mask); } -static inline void l2x0_inv_line(unsigned long addr) +static inline void l2c_unlock(void __iomem *base, unsigned num) { - void __iomem *base = l2x0_base; - cache_wait(base + L2X0_INV_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_INV_LINE_PA); + unsigned i; + + for (i = 0; i < num; i++) { + writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } } -#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915) -static inline void debug_writel(unsigned long val) +/* + * Enable the L2 cache controller. This function must only be + * called when the cache controller is known to be disabled. + */ +static void l2c_enable(void __iomem *base, u32 aux, unsigned num_lock) { - if (outer_cache.set_debug) - outer_cache.set_debug(val); + unsigned long flags; + + l2c_write_sec(aux, base, L2X0_AUX_CTRL); + + l2c_unlock(base, num_lock); + + local_irq_save(flags); + __l2c_op_way(base + L2X0_INV_WAY); + writel_relaxed(0, base + sync_reg_offset); + l2c_wait_mask(base + sync_reg_offset, 1); + local_irq_restore(flags); + + l2c_write_sec(L2X0_CTRL_EN, base, L2X0_CTRL); } -static void pl310_set_debug(unsigned long val) +static void l2c_disable(void) { - writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL); + void __iomem *base = l2x0_base; + + outer_cache.flush_all(); + l2c_write_sec(0, base, L2X0_CTRL); + dsb(st); } -#else -/* Optimised out for non-errata case */ -static inline void debug_writel(unsigned long val) + +#ifdef CONFIG_CACHE_PL310 +static inline void cache_wait(void __iomem *reg, unsigned long mask) { + /* cache operations by line are atomic on PL310 */ } - -#define pl310_set_debug NULL +#else +#define cache_wait l2c_wait_mask #endif -#ifdef CONFIG_PL310_ERRATA_588369 -static inline void l2x0_flush_line(unsigned long addr) +static inline void cache_sync(void) { void __iomem *base = l2x0_base; - /* Clean by PA followed by Invalidate by PA */ - cache_wait(base + L2X0_CLEAN_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA); - cache_wait(base + L2X0_INV_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_INV_LINE_PA); + writel_relaxed(0, base + sync_reg_offset); + cache_wait(base + L2X0_CACHE_SYNC, 1); } -#else -static inline void l2x0_flush_line(unsigned long addr) +#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915) +static inline void debug_writel(unsigned long val) +{ + l2c_set_debug(l2x0_base, val); +} +#else +/* Optimised out for non-errata case */ +static inline void debug_writel(unsigned long val) { - void __iomem *base = l2x0_base; - cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_CLEAN_INV_LINE_PA); } #endif @@ -141,8 +176,7 @@ static void l2x0_cache_sync(void) static void __l2x0_flush_all(void) { debug_writel(0x03); - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY); - cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask); + __l2c_op_way(l2x0_base + L2X0_CLEAN_INV_WAY); cache_sync(); debug_writel(0x00); } @@ -157,275 +191,883 @@ static void l2x0_flush_all(void) raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_clean_all(void) +static void l2x0_disable(void) { unsigned long flags; - /* clean all ways */ raw_spin_lock_irqsave(&l2x0_lock, flags); - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_WAY); - cache_wait_way(l2x0_base + L2X0_CLEAN_WAY, l2x0_way_mask); - cache_sync(); + __l2x0_flush_all(); + l2c_write_sec(0, l2x0_base, L2X0_CTRL); + dsb(st); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_inv_all(void) +static void l2c_save(void __iomem *base) { - unsigned long flags; + l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); +} - /* invalidate all ways */ - raw_spin_lock_irqsave(&l2x0_lock, flags); - /* Invalidating when L2 is enabled is a nono */ - BUG_ON(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN); - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); - cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); - cache_sync(); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); +/* + * L2C-210 specific code. + * + * The L2C-2x0 PA, set/way and sync operations are atomic, but we must + * ensure that no background operation is running. The way operations + * are all background tasks. + * + * While a background operation is in progress, any new operation is + * ignored (unspecified whether this causes an error.) Thankfully, not + * used on SMP. + * + * Never has a different sync register other than L2X0_CACHE_SYNC, but + * we use sync_reg_offset here so we can share some of this with L2C-310. + */ +static void __l2c210_cache_sync(void __iomem *base) +{ + writel_relaxed(0, base + sync_reg_offset); } -static void l2x0_inv_range(unsigned long start, unsigned long end) +static void __l2c210_op_pa_range(void __iomem *reg, unsigned long start, + unsigned long end) +{ + while (start < end) { + writel_relaxed(start, reg); + start += CACHE_LINE_SIZE; + } +} + +static void l2c210_inv_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; - unsigned long flags; - raw_spin_lock_irqsave(&l2x0_lock, flags); if (start & (CACHE_LINE_SIZE - 1)) { start &= ~(CACHE_LINE_SIZE - 1); - debug_writel(0x03); - l2x0_flush_line(start); - debug_writel(0x00); + writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA); start += CACHE_LINE_SIZE; } if (end & (CACHE_LINE_SIZE - 1)) { end &= ~(CACHE_LINE_SIZE - 1); - debug_writel(0x03); - l2x0_flush_line(end); - debug_writel(0x00); + writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA); } + __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c210_clean_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + start &= ~(CACHE_LINE_SIZE - 1); + __l2c210_op_pa_range(base + L2X0_CLEAN_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c210_flush_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + start &= ~(CACHE_LINE_SIZE - 1); + __l2c210_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c210_flush_all(void) +{ + void __iomem *base = l2x0_base; + + BUG_ON(!irqs_disabled()); + + __l2c_op_way(base + L2X0_CLEAN_INV_WAY); + __l2c210_cache_sync(base); +} + +static void l2c210_sync(void) +{ + __l2c210_cache_sync(l2x0_base); +} + +static void l2c210_resume(void) +{ + void __iomem *base = l2x0_base; + + if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) + l2c_enable(base, l2x0_saved_regs.aux_ctrl, 1); +} + +static const struct l2c_init_data l2c210_data __initconst = { + .type = "L2C-210", + .way_size_0 = SZ_8K, + .num_lock = 1, + .enable = l2c_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c_disable, + .sync = l2c210_sync, + .resume = l2c210_resume, + }, +}; + +/* + * L2C-220 specific code. + * + * All operations are background operations: they have to be waited for. + * Conflicting requests generate a slave error (which will cause an + * imprecise abort.) Never uses sync_reg_offset, so we hard-code the + * sync register here. + * + * However, we can re-use the l2c210_resume call. + */ +static inline void __l2c220_cache_sync(void __iomem *base) +{ + writel_relaxed(0, base + L2X0_CACHE_SYNC); + l2c_wait_mask(base + L2X0_CACHE_SYNC, 1); +} + +static void l2c220_op_way(void __iomem *base, unsigned reg) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + __l2c_op_way(base + reg); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static unsigned long l2c220_op_pa_range(void __iomem *reg, unsigned long start, + unsigned long end, unsigned long flags) +{ + raw_spinlock_t *lock = &l2x0_lock; + while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); while (start < blk_end) { - l2x0_inv_line(start); + l2c_wait_mask(reg, 1); + writel_relaxed(start, reg); start += CACHE_LINE_SIZE; } if (blk_end < end) { - raw_spin_unlock_irqrestore(&l2x0_lock, flags); - raw_spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(lock, flags); + raw_spin_lock_irqsave(lock, flags); } } - cache_wait(base + L2X0_INV_LINE_PA, 1); - cache_sync(); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); + + return flags; } -static void l2x0_clean_range(unsigned long start, unsigned long end) +static void l2c220_inv_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; unsigned long flags; - if ((end - start) >= l2x0_size) { - l2x0_clean_all(); - return; - } - raw_spin_lock_irqsave(&l2x0_lock, flags); - start &= ~(CACHE_LINE_SIZE - 1); - while (start < end) { - unsigned long blk_end = start + min(end - start, 4096UL); - - while (start < blk_end) { - l2x0_clean_line(start); + if ((start | end) & (CACHE_LINE_SIZE - 1)) { + if (start & (CACHE_LINE_SIZE - 1)) { + start &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA); start += CACHE_LINE_SIZE; } - if (blk_end < end) { - raw_spin_unlock_irqrestore(&l2x0_lock, flags); - raw_spin_lock_irqsave(&l2x0_lock, flags); + if (end & (CACHE_LINE_SIZE - 1)) { + end &= ~(CACHE_LINE_SIZE - 1); + l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); + writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA); } } - cache_wait(base + L2X0_CLEAN_LINE_PA, 1); - cache_sync(); + + flags = l2c220_op_pa_range(base + L2X0_INV_LINE_PA, + start, end, flags); + l2c_wait_mask(base + L2X0_INV_LINE_PA, 1); + __l2c220_cache_sync(base); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_flush_range(unsigned long start, unsigned long end) +static void l2c220_clean_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; unsigned long flags; + start &= ~(CACHE_LINE_SIZE - 1); if ((end - start) >= l2x0_size) { - l2x0_flush_all(); + l2c220_op_way(base, L2X0_CLEAN_WAY); return; } raw_spin_lock_irqsave(&l2x0_lock, flags); + flags = l2c220_op_pa_range(base + L2X0_CLEAN_LINE_PA, + start, end, flags); + l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_flush_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + unsigned long flags; + start &= ~(CACHE_LINE_SIZE - 1); + if ((end - start) >= l2x0_size) { + l2c220_op_way(base, L2X0_CLEAN_INV_WAY); + return; + } + + raw_spin_lock_irqsave(&l2x0_lock, flags); + flags = l2c220_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, + start, end, flags); + l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_flush_all(void) +{ + l2c220_op_way(l2x0_base, L2X0_CLEAN_INV_WAY); +} + +static void l2c220_sync(void) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + __l2c220_cache_sync(l2x0_base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_enable(void __iomem *base, u32 aux, unsigned num_lock) +{ + /* + * Always enable non-secure access to the lockdown registers - + * we write to them as part of the L2C enable sequence so they + * need to be accessible. + */ + aux |= L220_AUX_CTRL_NS_LOCKDOWN; + + l2c_enable(base, aux, num_lock); +} + +static const struct l2c_init_data l2c220_data = { + .type = "L2C-220", + .way_size_0 = SZ_8K, + .num_lock = 1, + .enable = l2c220_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c220_inv_range, + .clean_range = l2c220_clean_range, + .flush_range = l2c220_flush_range, + .flush_all = l2c220_flush_all, + .disable = l2c_disable, + .sync = l2c220_sync, + .resume = l2c210_resume, + }, +}; + +/* + * L2C-310 specific code. + * + * Very similar to L2C-210, the PA, set/way and sync operations are atomic, + * and the way operations are all background tasks. However, issuing an + * operation while a background operation is in progress results in a + * SLVERR response. We can reuse: + * + * __l2c210_cache_sync (using sync_reg_offset) + * l2c210_sync + * l2c210_inv_range (if 588369 is not applicable) + * l2c210_clean_range + * l2c210_flush_range (if 588369 is not applicable) + * l2c210_flush_all (if 727915 is not applicable) + * + * Errata: + * 588369: PL310 R0P0->R1P0, fixed R2P0. + * Affects: all clean+invalidate operations + * clean and invalidate skips the invalidate step, so we need to issue + * separate operations. We also require the above debug workaround + * enclosing this code fragment on affected parts. On unaffected parts, + * we must not use this workaround without the debug register writes + * to avoid exposing a problem similar to 727915. + * + * 727915: PL310 R2P0->R3P0, fixed R3P1. + * Affects: clean+invalidate by way + * clean and invalidate by way runs in the background, and a store can + * hit the line between the clean operation and invalidate operation, + * resulting in the store being lost. + * + * 752271: PL310 R3P0->R3P1-50REL0, fixed R3P2. + * Affects: 8x64-bit (double fill) line fetches + * double fill line fetches can fail to cause dirty data to be evicted + * from the cache before the new data overwrites the second line. + * + * 753970: PL310 R3P0, fixed R3P1. + * Affects: sync + * prevents merging writes after the sync operation, until another L2C + * operation is performed (or a number of other conditions.) + * + * 769419: PL310 R0P0->R3P1, fixed R3P2. + * Affects: store buffer + * store buffer is not automatically drained. + */ +static void l2c310_inv_range_erratum(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + if ((start | end) & (CACHE_LINE_SIZE - 1)) { + unsigned long flags; + + /* Erratum 588369 for both clean+invalidate operations */ + raw_spin_lock_irqsave(&l2x0_lock, flags); + l2c_set_debug(base, 0x03); + + if (start & (CACHE_LINE_SIZE - 1)) { + start &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(start, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(start, base + L2X0_INV_LINE_PA); + start += CACHE_LINE_SIZE; + } + + if (end & (CACHE_LINE_SIZE - 1)) { + end &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(end, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(end, base + L2X0_INV_LINE_PA); + } + + l2c_set_debug(base, 0x00); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + } + + __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c310_flush_range_erratum(unsigned long start, unsigned long end) +{ + raw_spinlock_t *lock = &l2x0_lock; + unsigned long flags; + void __iomem *base = l2x0_base; + + raw_spin_lock_irqsave(lock, flags); while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); - debug_writel(0x03); + l2c_set_debug(base, 0x03); while (start < blk_end) { - l2x0_flush_line(start); + writel_relaxed(start, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(start, base + L2X0_INV_LINE_PA); start += CACHE_LINE_SIZE; } - debug_writel(0x00); + l2c_set_debug(base, 0x00); if (blk_end < end) { - raw_spin_unlock_irqrestore(&l2x0_lock, flags); - raw_spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(lock, flags); + raw_spin_lock_irqsave(lock, flags); } } - cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); - cache_sync(); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(lock, flags); + __l2c210_cache_sync(base); } -static void l2x0_disable(void) +static void l2c310_flush_all_erratum(void) { + void __iomem *base = l2x0_base; unsigned long flags; raw_spin_lock_irqsave(&l2x0_lock, flags); - __l2x0_flush_all(); - writel_relaxed(0, l2x0_base + L2X0_CTRL); - dsb(st); + l2c_set_debug(base, 0x03); + __l2c_op_way(base + L2X0_CLEAN_INV_WAY); + l2c_set_debug(base, 0x00); + __l2c210_cache_sync(base); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_unlock(u32 cache_id) +static void __init l2c310_save(void __iomem *base) { - int lockregs; - int i; + unsigned revision; - switch (cache_id & L2X0_CACHE_ID_PART_MASK) { - case L2X0_CACHE_ID_PART_L310: - lockregs = 8; - break; - case AURORA_CACHE_ID: - lockregs = 4; + l2c_save(base); + + l2x0_saved_regs.tag_latency = readl_relaxed(base + + L310_TAG_LATENCY_CTRL); + l2x0_saved_regs.data_latency = readl_relaxed(base + + L310_DATA_LATENCY_CTRL); + l2x0_saved_regs.filter_end = readl_relaxed(base + + L310_ADDR_FILTER_END); + l2x0_saved_regs.filter_start = readl_relaxed(base + + L310_ADDR_FILTER_START); + + revision = readl_relaxed(base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + /* From r2p0, there is Prefetch offset/control register */ + if (revision >= L310_CACHE_ID_RTL_R2P0) + l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base + + L310_PREFETCH_CTRL); + + /* From r3p0, there is Power control register */ + if (revision >= L310_CACHE_ID_RTL_R3P0) + l2x0_saved_regs.pwr_ctrl = readl_relaxed(base + + L310_POWER_CTRL); +} + +static void l2c310_resume(void) +{ + void __iomem *base = l2x0_base; + + if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) { + unsigned revision; + + /* restore pl310 setup */ + writel_relaxed(l2x0_saved_regs.tag_latency, + base + L310_TAG_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.data_latency, + base + L310_DATA_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.filter_end, + base + L310_ADDR_FILTER_END); + writel_relaxed(l2x0_saved_regs.filter_start, + base + L310_ADDR_FILTER_START); + + revision = readl_relaxed(base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + if (revision >= L310_CACHE_ID_RTL_R2P0) + l2c_write_sec(l2x0_saved_regs.prefetch_ctrl, base, + L310_PREFETCH_CTRL); + if (revision >= L310_CACHE_ID_RTL_R3P0) + l2c_write_sec(l2x0_saved_regs.pwr_ctrl, base, + L310_POWER_CTRL); + + l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8); + + /* Re-enable full-line-of-zeros for Cortex-A9 */ + if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO) + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); + } +} + +static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, void *data) +{ + switch (act & ~CPU_TASKS_FROZEN) { + case CPU_STARTING: + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); break; - default: - /* L210 and unknown types */ - lockregs = 1; + case CPU_DYING: + set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1))); break; } + return NOTIFY_OK; +} - for (i = 0; i < lockregs; i++) { - writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + - i * L2X0_LOCKDOWN_STRIDE); - writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + - i * L2X0_LOCKDOWN_STRIDE); +static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) +{ + unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK; + bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9; + + if (rev >= L310_CACHE_ID_RTL_R2P0) { + if (cortex_a9) { + aux |= L310_AUX_CTRL_EARLY_BRESP; + pr_info("L2C-310 enabling early BRESP for Cortex-A9\n"); + } else if (aux & L310_AUX_CTRL_EARLY_BRESP) { + pr_warn("L2C-310 early BRESP only supported with Cortex-A9\n"); + aux &= ~L310_AUX_CTRL_EARLY_BRESP; + } + } + + if (cortex_a9) { + u32 aux_cur = readl_relaxed(base + L2X0_AUX_CTRL); + u32 acr = get_auxcr(); + + pr_debug("Cortex-A9 ACR=0x%08x\n", acr); + + if (acr & BIT(3) && !(aux_cur & L310_AUX_CTRL_FULL_LINE_ZERO)) + pr_err("L2C-310: full line of zeros enabled in Cortex-A9 but not L2C-310 - invalid\n"); + + if (aux & L310_AUX_CTRL_FULL_LINE_ZERO && !(acr & BIT(3))) + pr_err("L2C-310: enabling full line of zeros but not enabled in Cortex-A9\n"); + + if (!(aux & L310_AUX_CTRL_FULL_LINE_ZERO) && !outer_cache.write_sec) { + aux |= L310_AUX_CTRL_FULL_LINE_ZERO; + pr_info("L2C-310 full line of zeros enabled for Cortex-A9\n"); + } + } else if (aux & (L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP)) { + pr_err("L2C-310: disabling Cortex-A9 specific feature bits\n"); + aux &= ~(L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP); + } + + if (aux & (L310_AUX_CTRL_DATA_PREFETCH | L310_AUX_CTRL_INSTR_PREFETCH)) { + u32 prefetch = readl_relaxed(base + L310_PREFETCH_CTRL); + + pr_info("L2C-310 %s%s prefetch enabled, offset %u lines\n", + aux & L310_AUX_CTRL_INSTR_PREFETCH ? "I" : "", + aux & L310_AUX_CTRL_DATA_PREFETCH ? "D" : "", + 1 + (prefetch & L310_PREFETCH_CTRL_OFFSET_MASK)); + } + + /* r3p0 or later has power control register */ + if (rev >= L310_CACHE_ID_RTL_R3P0) { + u32 power_ctrl; + + l2c_write_sec(L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN, + base, L310_POWER_CTRL); + power_ctrl = readl_relaxed(base + L310_POWER_CTRL); + pr_info("L2C-310 dynamic clock gating %sabled, standby mode %sabled\n", + power_ctrl & L310_DYNAMIC_CLK_GATING_EN ? "en" : "dis", + power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis"); + } + + /* + * Always enable non-secure access to the lockdown registers - + * we write to them as part of the L2C enable sequence so they + * need to be accessible. + */ + aux |= L310_AUX_CTRL_NS_LOCKDOWN; + + l2c_enable(base, aux, num_lock); + + if (aux & L310_AUX_CTRL_FULL_LINE_ZERO) { + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); + cpu_notifier(l2c310_cpu_enable_flz, 0); } } -void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) +static void __init l2c310_fixup(void __iomem *base, u32 cache_id, + struct outer_cache_fns *fns) { - u32 aux; - u32 cache_id; - u32 way_size = 0; - int ways; - int way_size_shift = L2X0_WAY_SIZE_SHIFT; - const char *type; + unsigned revision = cache_id & L2X0_CACHE_ID_RTL_MASK; + const char *errata[8]; + unsigned n = 0; + + if (IS_ENABLED(CONFIG_PL310_ERRATA_588369) && + revision < L310_CACHE_ID_RTL_R2P0 && + /* For bcm compatibility */ + fns->inv_range == l2c210_inv_range) { + fns->inv_range = l2c310_inv_range_erratum; + fns->flush_range = l2c310_flush_range_erratum; + errata[n++] = "588369"; + } - l2x0_base = base; - if (cache_id_part_number_from_dt) - cache_id = cache_id_part_number_from_dt; - else - cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); - aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); + if (IS_ENABLED(CONFIG_PL310_ERRATA_727915) && + revision >= L310_CACHE_ID_RTL_R2P0 && + revision < L310_CACHE_ID_RTL_R3P1) { + fns->flush_all = l2c310_flush_all_erratum; + errata[n++] = "727915"; + } + + if (revision >= L310_CACHE_ID_RTL_R3P0 && + revision < L310_CACHE_ID_RTL_R3P2) { + u32 val = readl_relaxed(base + L310_PREFETCH_CTRL); + /* I don't think bit23 is required here... but iMX6 does so */ + if (val & (BIT(30) | BIT(23))) { + val &= ~(BIT(30) | BIT(23)); + l2c_write_sec(val, base, L310_PREFETCH_CTRL); + errata[n++] = "752271"; + } + } + + if (IS_ENABLED(CONFIG_PL310_ERRATA_753970) && + revision == L310_CACHE_ID_RTL_R3P0) { + sync_reg_offset = L2X0_DUMMY_REG; + errata[n++] = "753970"; + } + + if (IS_ENABLED(CONFIG_PL310_ERRATA_769419)) + errata[n++] = "769419"; + + if (n) { + unsigned i; + pr_info("L2C-310 errat%s", n > 1 ? "a" : "um"); + for (i = 0; i < n; i++) + pr_cont(" %s", errata[i]); + pr_cont(" enabled\n"); + } +} + +static void l2c310_disable(void) +{ + /* + * If full-line-of-zeros is enabled, we must first disable it in the + * Cortex-A9 auxiliary control register before disabling the L2 cache. + */ + if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO) + set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1))); + + l2c_disable(); +} + +static const struct l2c_init_data l2c310_init_fns __initconst = { + .type = "L2C-310", + .way_size_0 = SZ_8K, + .num_lock = 8, + .enable = l2c310_enable, + .fixup = l2c310_fixup, + .save = l2c310_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .sync = l2c210_sync, + .resume = l2c310_resume, + }, +}; + +static void __init __l2c_init(const struct l2c_init_data *data, + u32 aux_val, u32 aux_mask, u32 cache_id) +{ + struct outer_cache_fns fns; + unsigned way_size_bits, ways; + u32 aux, old_aux; + + /* + * Sanity check the aux values. aux_mask is the bits we preserve + * from reading the hardware register, and aux_val is the bits we + * set. + */ + if (aux_val & aux_mask) + pr_alert("L2C: platform provided aux values permit register corruption.\n"); + + old_aux = aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); aux &= aux_mask; aux |= aux_val; + if (old_aux != aux) + pr_warn("L2C: DT/platform modifies aux control register: 0x%08x -> 0x%08x\n", + old_aux, aux); + /* Determine the number of ways */ switch (cache_id & L2X0_CACHE_ID_PART_MASK) { case L2X0_CACHE_ID_PART_L310: + if ((aux_val | ~aux_mask) & (L2C_AUX_CTRL_WAY_SIZE_MASK | L310_AUX_CTRL_ASSOCIATIVITY_16)) + pr_warn("L2C: DT/platform tries to modify or specify cache size\n"); if (aux & (1 << 16)) ways = 16; else ways = 8; - type = "L310"; -#ifdef CONFIG_PL310_ERRATA_753970 - /* Unmapped register. */ - sync_reg_offset = L2X0_DUMMY_REG; -#endif - if ((cache_id & L2X0_CACHE_ID_RTL_MASK) <= L2X0_CACHE_ID_RTL_R3P0) - outer_cache.set_debug = pl310_set_debug; break; + case L2X0_CACHE_ID_PART_L210: + case L2X0_CACHE_ID_PART_L220: ways = (aux >> 13) & 0xf; - type = "L210"; break; case AURORA_CACHE_ID: - sync_reg_offset = AURORA_SYNC_REG; ways = (aux >> 13) & 0xf; ways = 2 << ((ways + 1) >> 2); - way_size_shift = AURORA_WAY_SIZE_SHIFT; - type = "Aurora"; break; + default: /* Assume unknown chips have 8 ways */ ways = 8; - type = "L2x0 series"; break; } l2x0_way_mask = (1 << ways) - 1; /* - * L2 cache Size = Way size * Number of ways + * way_size_0 is the size that a way_size value of zero would be + * given the calculation: way_size = way_size_0 << way_size_bits. + * So, if way_size_bits=0 is reserved, but way_size_bits=1 is 16k, + * then way_size_0 would be 8k. + * + * L2 cache size = number of ways * way size. */ - way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17; - way_size = 1 << (way_size + way_size_shift); + way_size_bits = (aux & L2C_AUX_CTRL_WAY_SIZE_MASK) >> + L2C_AUX_CTRL_WAY_SIZE_SHIFT; + l2x0_size = ways * (data->way_size_0 << way_size_bits); - l2x0_size = ways * way_size * SZ_1K; + fns = data->outer_cache; + fns.write_sec = outer_cache.write_sec; + if (data->fixup) + data->fixup(l2x0_base, cache_id, &fns); /* - * Check if l2x0 controller is already enabled. - * If you are booting from non-secure mode - * accessing the below registers will fault. + * Check if l2x0 controller is already enabled. If we are booting + * in non-secure mode accessing the below registers will fault. */ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - /* Make sure that I&D is not locked down when starting */ - l2x0_unlock(cache_id); + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) + data->enable(l2x0_base, aux, data->num_lock); - /* l2x0 controller is disabled */ - writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL); + outer_cache = fns; - l2x0_inv_all(); - - /* enable L2X0 */ - writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL); - } + /* + * It is strange to save the register state before initialisation, + * but hey, this is what the DT implementations decided to do. + */ + if (data->save) + data->save(l2x0_base); /* Re-read it in case some bits are reserved. */ aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); - /* Save the value for resuming. */ - l2x0_saved_regs.aux_ctrl = aux; + pr_info("%s cache controller enabled, %d ways, %d kB\n", + data->type, ways, l2x0_size >> 10); + pr_info("%s: CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n", + data->type, cache_id, aux); +} + +void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) +{ + const struct l2c_init_data *data; + u32 cache_id; + + l2x0_base = base; + + cache_id = readl_relaxed(base + L2X0_CACHE_ID); + + switch (cache_id & L2X0_CACHE_ID_PART_MASK) { + default: + case L2X0_CACHE_ID_PART_L210: + data = &l2c210_data; + break; - if (!of_init) { - outer_cache.inv_range = l2x0_inv_range; - outer_cache.clean_range = l2x0_clean_range; - outer_cache.flush_range = l2x0_flush_range; - outer_cache.sync = l2x0_cache_sync; - outer_cache.flush_all = l2x0_flush_all; - outer_cache.inv_all = l2x0_inv_all; - outer_cache.disable = l2x0_disable; + case L2X0_CACHE_ID_PART_L220: + data = &l2c220_data; + break; + + case L2X0_CACHE_ID_PART_L310: + data = &l2c310_init_fns; + break; } - pr_info("%s cache controller enabled\n", type); - pr_info("l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d kB\n", - ways, cache_id, aux, l2x0_size >> 10); + __l2c_init(data, aux_val, aux_mask, cache_id); } #ifdef CONFIG_OF static int l2_wt_override; +/* Aurora don't have the cache ID register available, so we have to + * pass it though the device tree */ +static u32 cache_id_part_number_from_dt; + +static void __init l2x0_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 data[2] = { 0, 0 }; + u32 tag = 0; + u32 dirty = 0; + u32 val = 0, mask = 0; + + of_property_read_u32(np, "arm,tag-latency", &tag); + if (tag) { + mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK; + val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT; + } + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1]) { + mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK | + L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK; + val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) | + ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT); + } + + of_property_read_u32(np, "arm,dirty-latency", &dirty); + if (dirty) { + mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK; + val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + +static const struct l2c_init_data of_l2c210_data __initconst = { + .type = "L2C-210", + .way_size_0 = SZ_8K, + .num_lock = 1, + .of_parse = l2x0_of_parse, + .enable = l2c_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c_disable, + .sync = l2c210_sync, + .resume = l2c210_resume, + }, +}; + +static const struct l2c_init_data of_l2c220_data __initconst = { + .type = "L2C-220", + .way_size_0 = SZ_8K, + .num_lock = 1, + .of_parse = l2x0_of_parse, + .enable = l2c220_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c220_inv_range, + .clean_range = l2c220_clean_range, + .flush_range = l2c220_flush_range, + .flush_all = l2c220_flush_all, + .disable = l2c_disable, + .sync = l2c220_sync, + .resume = l2c210_resume, + }, +}; + +static void __init l2c310_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 data[3] = { 0, 0, 0 }; + u32 tag[3] = { 0, 0, 0 }; + u32 filter[2] = { 0, 0 }; + + of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); + if (tag[0] && tag[1] && tag[2]) + writel_relaxed( + L310_LATENCY_CTRL_RD(tag[0] - 1) | + L310_LATENCY_CTRL_WR(tag[1] - 1) | + L310_LATENCY_CTRL_SETUP(tag[2] - 1), + l2x0_base + L310_TAG_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1] && data[2]) + writel_relaxed( + L310_LATENCY_CTRL_RD(data[0] - 1) | + L310_LATENCY_CTRL_WR(data[1] - 1) | + L310_LATENCY_CTRL_SETUP(data[2] - 1), + l2x0_base + L310_DATA_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,filter-ranges", + filter, ARRAY_SIZE(filter)); + if (filter[1]) { + writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M), + l2x0_base + L310_ADDR_FILTER_END); + writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L310_ADDR_FILTER_EN, + l2x0_base + L310_ADDR_FILTER_START); + } +} + +static const struct l2c_init_data of_l2c310_data __initconst = { + .type = "L2C-310", + .way_size_0 = SZ_8K, + .num_lock = 8, + .of_parse = l2c310_of_parse, + .enable = l2c310_enable, + .fixup = l2c310_fixup, + .save = l2c310_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .sync = l2c210_sync, + .resume = l2c310_resume, + }, +}; + /* * Note that the end addresses passed to Linux primitives are * noninclusive, while the hardware cache range operations use @@ -524,6 +1166,100 @@ static void aurora_flush_range(unsigned long start, unsigned long end) } } +static void aurora_save(void __iomem *base) +{ + l2x0_saved_regs.ctrl = readl_relaxed(base + L2X0_CTRL); + l2x0_saved_regs.aux_ctrl = readl_relaxed(base + L2X0_AUX_CTRL); +} + +static void aurora_resume(void) +{ + void __iomem *base = l2x0_base; + + if (!(readl(base + L2X0_CTRL) & L2X0_CTRL_EN)) { + writel_relaxed(l2x0_saved_regs.aux_ctrl, base + L2X0_AUX_CTRL); + writel_relaxed(l2x0_saved_regs.ctrl, base + L2X0_CTRL); + } +} + +/* + * For Aurora cache in no outer mode, enable via the CP15 coprocessor + * broadcasting of cache commands to L2. + */ +static void __init aurora_enable_no_outer(void __iomem *base, u32 aux, + unsigned num_lock) +{ + u32 u; + + asm volatile("mrc p15, 1, %0, c15, c2, 0" : "=r" (u)); + u |= AURORA_CTRL_FW; /* Set the FW bit */ + asm volatile("mcr p15, 1, %0, c15, c2, 0" : : "r" (u)); + + isb(); + + l2c_enable(base, aux, num_lock); +} + +static void __init aurora_fixup(void __iomem *base, u32 cache_id, + struct outer_cache_fns *fns) +{ + sync_reg_offset = AURORA_SYNC_REG; +} + +static void __init aurora_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU; + u32 mask = AURORA_ACR_REPLACEMENT_MASK; + + of_property_read_u32(np, "cache-id-part", + &cache_id_part_number_from_dt); + + /* Determine and save the write policy */ + l2_wt_override = of_property_read_bool(np, "wt-override"); + + if (l2_wt_override) { + val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY; + mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + +static const struct l2c_init_data of_aurora_with_outer_data __initconst = { + .type = "Aurora", + .way_size_0 = SZ_4K, + .num_lock = 4, + .of_parse = aurora_of_parse, + .enable = l2c_enable, + .fixup = aurora_fixup, + .save = aurora_save, + .outer_cache = { + .inv_range = aurora_inv_range, + .clean_range = aurora_clean_range, + .flush_range = aurora_flush_range, + .flush_all = l2x0_flush_all, + .disable = l2x0_disable, + .sync = l2x0_cache_sync, + .resume = aurora_resume, + }, +}; + +static const struct l2c_init_data of_aurora_no_outer_data __initconst = { + .type = "Aurora", + .way_size_0 = SZ_4K, + .num_lock = 4, + .of_parse = aurora_of_parse, + .enable = aurora_enable_no_outer, + .fixup = aurora_fixup, + .save = aurora_save, + .outer_cache = { + .resume = aurora_resume, + }, +}; + /* * For certain Broadcom SoCs, depending on the address range, different offsets * need to be added to the address before passing it to L2 for @@ -588,16 +1324,16 @@ static void bcm_inv_range(unsigned long start, unsigned long end) /* normal case, no cross section between start and end */ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { - l2x0_inv_range(new_start, new_end); + l2c210_inv_range(new_start, new_end); return; } /* They cross sections, so it can only be a cross from section * 2 to section 3 */ - l2x0_inv_range(new_start, + l2c210_inv_range(new_start, bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); - l2x0_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + l2c210_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), new_end); } @@ -610,26 +1346,21 @@ static void bcm_clean_range(unsigned long start, unsigned long end) if (unlikely(end <= start)) return; - if ((end - start) >= l2x0_size) { - l2x0_clean_all(); - return; - } - new_start = bcm_l2_phys_addr(start); new_end = bcm_l2_phys_addr(end); /* normal case, no cross section between start and end */ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { - l2x0_clean_range(new_start, new_end); + l2c210_clean_range(new_start, new_end); return; } /* They cross sections, so it can only be a cross from section * 2 to section 3 */ - l2x0_clean_range(new_start, + l2c210_clean_range(new_start, bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); - l2x0_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + l2c210_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), new_end); } @@ -643,7 +1374,7 @@ static void bcm_flush_range(unsigned long start, unsigned long end) return; if ((end - start) >= l2x0_size) { - l2x0_flush_all(); + outer_cache.flush_all(); return; } @@ -652,283 +1383,67 @@ static void bcm_flush_range(unsigned long start, unsigned long end) /* normal case, no cross section between start and end */ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { - l2x0_flush_range(new_start, new_end); + l2c210_flush_range(new_start, new_end); return; } /* They cross sections, so it can only be a cross from section * 2 to section 3 */ - l2x0_flush_range(new_start, + l2c210_flush_range(new_start, bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); - l2x0_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + l2c210_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), new_end); } -static void __init l2x0_of_setup(const struct device_node *np, - u32 *aux_val, u32 *aux_mask) -{ - u32 data[2] = { 0, 0 }; - u32 tag = 0; - u32 dirty = 0; - u32 val = 0, mask = 0; - - of_property_read_u32(np, "arm,tag-latency", &tag); - if (tag) { - mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK; - val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT; - } - - of_property_read_u32_array(np, "arm,data-latency", - data, ARRAY_SIZE(data)); - if (data[0] && data[1]) { - mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK | - L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK; - val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) | - ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT); - } - - of_property_read_u32(np, "arm,dirty-latency", &dirty); - if (dirty) { - mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK; - val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; - } - - *aux_val &= ~mask; - *aux_val |= val; - *aux_mask &= ~mask; -} - -static void __init pl310_of_setup(const struct device_node *np, - u32 *aux_val, u32 *aux_mask) -{ - u32 data[3] = { 0, 0, 0 }; - u32 tag[3] = { 0, 0, 0 }; - u32 filter[2] = { 0, 0 }; - - of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); - if (tag[0] && tag[1] && tag[2]) - writel_relaxed( - ((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | - ((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | - ((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), - l2x0_base + L2X0_TAG_LATENCY_CTRL); - - of_property_read_u32_array(np, "arm,data-latency", - data, ARRAY_SIZE(data)); - if (data[0] && data[1] && data[2]) - writel_relaxed( - ((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | - ((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | - ((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), - l2x0_base + L2X0_DATA_LATENCY_CTRL); - - of_property_read_u32_array(np, "arm,filter-ranges", - filter, ARRAY_SIZE(filter)); - if (filter[1]) { - writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M), - l2x0_base + L2X0_ADDR_FILTER_END); - writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN, - l2x0_base + L2X0_ADDR_FILTER_START); - } -} - -static void __init pl310_save(void) -{ - u32 l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & - L2X0_CACHE_ID_RTL_MASK; - - l2x0_saved_regs.tag_latency = readl_relaxed(l2x0_base + - L2X0_TAG_LATENCY_CTRL); - l2x0_saved_regs.data_latency = readl_relaxed(l2x0_base + - L2X0_DATA_LATENCY_CTRL); - l2x0_saved_regs.filter_end = readl_relaxed(l2x0_base + - L2X0_ADDR_FILTER_END); - l2x0_saved_regs.filter_start = readl_relaxed(l2x0_base + - L2X0_ADDR_FILTER_START); - - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { - /* - * From r2p0, there is Prefetch offset/control register - */ - l2x0_saved_regs.prefetch_ctrl = readl_relaxed(l2x0_base + - L2X0_PREFETCH_CTRL); - /* - * From r3p0, there is Power control register - */ - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) - l2x0_saved_regs.pwr_ctrl = readl_relaxed(l2x0_base + - L2X0_POWER_CTRL); - } -} +/* Broadcom L2C-310 start from ARMs R3P2 or later, and require no fixups */ +static const struct l2c_init_data of_bcm_l2x0_data __initconst = { + .type = "BCM-L2C-310", + .way_size_0 = SZ_8K, + .num_lock = 8, + .of_parse = l2c310_of_parse, + .enable = l2c310_enable, + .save = l2c310_save, + .outer_cache = { + .inv_range = bcm_inv_range, + .clean_range = bcm_clean_range, + .flush_range = bcm_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .sync = l2c210_sync, + .resume = l2c310_resume, + }, +}; -static void aurora_save(void) +static void __init tauros3_save(void __iomem *base) { - l2x0_saved_regs.ctrl = readl_relaxed(l2x0_base + L2X0_CTRL); - l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); -} + l2c_save(base); -static void __init tauros3_save(void) -{ l2x0_saved_regs.aux2_ctrl = - readl_relaxed(l2x0_base + TAUROS3_AUX2_CTRL); + readl_relaxed(base + TAUROS3_AUX2_CTRL); l2x0_saved_regs.prefetch_ctrl = - readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); -} - -static void l2x0_resume(void) -{ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - /* restore aux ctrl and enable l2 */ - l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID)); - - writel_relaxed(l2x0_saved_regs.aux_ctrl, l2x0_base + - L2X0_AUX_CTRL); - - l2x0_inv_all(); - - writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL); - } -} - -static void pl310_resume(void) -{ - u32 l2x0_revision; - - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - /* restore pl310 setup */ - writel_relaxed(l2x0_saved_regs.tag_latency, - l2x0_base + L2X0_TAG_LATENCY_CTRL); - writel_relaxed(l2x0_saved_regs.data_latency, - l2x0_base + L2X0_DATA_LATENCY_CTRL); - writel_relaxed(l2x0_saved_regs.filter_end, - l2x0_base + L2X0_ADDR_FILTER_END); - writel_relaxed(l2x0_saved_regs.filter_start, - l2x0_base + L2X0_ADDR_FILTER_START); - - l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & - L2X0_CACHE_ID_RTL_MASK; - - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { - writel_relaxed(l2x0_saved_regs.prefetch_ctrl, - l2x0_base + L2X0_PREFETCH_CTRL); - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) - writel_relaxed(l2x0_saved_regs.pwr_ctrl, - l2x0_base + L2X0_POWER_CTRL); - } - } - - l2x0_resume(); -} - -static void aurora_resume(void) -{ - if (!(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - writel_relaxed(l2x0_saved_regs.aux_ctrl, - l2x0_base + L2X0_AUX_CTRL); - writel_relaxed(l2x0_saved_regs.ctrl, l2x0_base + L2X0_CTRL); - } + readl_relaxed(base + L310_PREFETCH_CTRL); } static void tauros3_resume(void) { - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { + void __iomem *base = l2x0_base; + + if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) { writel_relaxed(l2x0_saved_regs.aux2_ctrl, - l2x0_base + TAUROS3_AUX2_CTRL); + base + TAUROS3_AUX2_CTRL); writel_relaxed(l2x0_saved_regs.prefetch_ctrl, - l2x0_base + L2X0_PREFETCH_CTRL); - } + base + L310_PREFETCH_CTRL); - l2x0_resume(); -} - -static void __init aurora_broadcast_l2_commands(void) -{ - __u32 u; - /* Enable Broadcasting of cache commands to L2*/ - __asm__ __volatile__("mrc p15, 1, %0, c15, c2, 0" : "=r"(u)); - u |= AURORA_CTRL_FW; /* Set the FW bit */ - __asm__ __volatile__("mcr p15, 1, %0, c15, c2, 0\n" : : "r"(u)); - isb(); -} - -static void __init aurora_of_setup(const struct device_node *np, - u32 *aux_val, u32 *aux_mask) -{ - u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU; - u32 mask = AURORA_ACR_REPLACEMENT_MASK; - - of_property_read_u32(np, "cache-id-part", - &cache_id_part_number_from_dt); - - /* Determine and save the write policy */ - l2_wt_override = of_property_read_bool(np, "wt-override"); - - if (l2_wt_override) { - val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY; - mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK; + l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8); } - - *aux_val &= ~mask; - *aux_val |= val; - *aux_mask &= ~mask; } -static const struct l2x0_of_data pl310_data = { - .setup = pl310_of_setup, - .save = pl310_save, - .outer_cache = { - .resume = pl310_resume, - .inv_range = l2x0_inv_range, - .clean_range = l2x0_clean_range, - .flush_range = l2x0_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - -static const struct l2x0_of_data l2x0_data = { - .setup = l2x0_of_setup, - .save = NULL, - .outer_cache = { - .resume = l2x0_resume, - .inv_range = l2x0_inv_range, - .clean_range = l2x0_clean_range, - .flush_range = l2x0_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - -static const struct l2x0_of_data aurora_with_outer_data = { - .setup = aurora_of_setup, - .save = aurora_save, - .outer_cache = { - .resume = aurora_resume, - .inv_range = aurora_inv_range, - .clean_range = aurora_clean_range, - .flush_range = aurora_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - -static const struct l2x0_of_data aurora_no_outer_data = { - .setup = aurora_of_setup, - .save = aurora_save, - .outer_cache = { - .resume = aurora_resume, - }, -}; - -static const struct l2x0_of_data tauros3_data = { - .setup = NULL, +static const struct l2c_init_data of_tauros3_data __initconst = { + .type = "Tauros3", + .way_size_0 = SZ_8K, + .num_lock = 8, + .enable = l2c_enable, .save = tauros3_save, /* Tauros3 broadcasts L1 cache operations to L2 */ .outer_cache = { @@ -936,43 +1451,26 @@ static const struct l2x0_of_data tauros3_data = { }, }; -static const struct l2x0_of_data bcm_l2x0_data = { - .setup = pl310_of_setup, - .save = pl310_save, - .outer_cache = { - .resume = pl310_resume, - .inv_range = bcm_inv_range, - .clean_range = bcm_clean_range, - .flush_range = bcm_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - +#define L2C_ID(name, fns) { .compatible = name, .data = (void *)&fns } static const struct of_device_id l2x0_ids[] __initconst = { - { .compatible = "arm,l210-cache", .data = (void *)&l2x0_data }, - { .compatible = "arm,l220-cache", .data = (void *)&l2x0_data }, - { .compatible = "arm,pl310-cache", .data = (void *)&pl310_data }, - { .compatible = "bcm,bcm11351-a2-pl310-cache", /* deprecated name */ - .data = (void *)&bcm_l2x0_data}, - { .compatible = "brcm,bcm11351-a2-pl310-cache", - .data = (void *)&bcm_l2x0_data}, - { .compatible = "marvell,aurora-outer-cache", - .data = (void *)&aurora_with_outer_data}, - { .compatible = "marvell,aurora-system-cache", - .data = (void *)&aurora_no_outer_data}, - { .compatible = "marvell,tauros3-cache", - .data = (void *)&tauros3_data }, + L2C_ID("arm,l210-cache", of_l2c210_data), + L2C_ID("arm,l220-cache", of_l2c220_data), + L2C_ID("arm,pl310-cache", of_l2c310_data), + L2C_ID("brcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data), + L2C_ID("marvell,aurora-outer-cache", of_aurora_with_outer_data), + L2C_ID("marvell,aurora-system-cache", of_aurora_no_outer_data), + L2C_ID("marvell,tauros3-cache", of_tauros3_data), + /* Deprecated IDs */ + L2C_ID("bcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data), {} }; int __init l2x0_of_init(u32 aux_val, u32 aux_mask) { + const struct l2c_init_data *data; struct device_node *np; - const struct l2x0_of_data *data; struct resource res; + u32 cache_id, old_aux; np = of_find_matching_node(NULL, l2x0_ids); if (!np) @@ -989,23 +1487,29 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) data = of_match_node(l2x0_ids, np)->data; - /* L2 configuration can only be changed if the cache is disabled */ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - if (data->setup) - data->setup(np, &aux_val, &aux_mask); - - /* For aurora cache in no outer mode select the - * correct mode using the coprocessor*/ - if (data == &aurora_no_outer_data) - aurora_broadcast_l2_commands(); + old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); + if (old_aux != ((old_aux & aux_mask) | aux_val)) { + pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n", + old_aux, (old_aux & aux_mask) | aux_val); + } else if (aux_mask != ~0U && aux_val != 0) { + pr_alert("L2C: platform provided aux values match the hardware, so have no effect. Please remove them.\n"); } - if (data->save) - data->save(); + /* All L2 caches are unified, so this property should be specified */ + if (!of_property_read_bool(np, "cache-unified")) + pr_err("L2C: device tree omits to specify unified cache\n"); + + /* L2 configuration can only be changed if the cache is disabled */ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) + if (data->of_parse) + data->of_parse(np, &aux_val, &aux_mask); + + if (cache_id_part_number_from_dt) + cache_id = cache_id_part_number_from_dt; + else + cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); - of_init = true; - memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache)); - l2x0_init(l2x0_base, aux_val, aux_mask); + __l2c_init(data, aux_val, aux_mask, cache_id); return 0; } diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 778bcf8..615c99e 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -59,7 +59,7 @@ ENTRY(v7_invalidate_l1) bgt 2b cmp r2, #0 bgt 1b - dsb + dsb st isb mov pc, lr ENDPROC(v7_invalidate_l1) @@ -166,7 +166,7 @@ skip: finished: mov r10, #0 @ swith back to cache level 0 mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr - dsb + dsb st isb mov pc, lr ENDPROC(v7_flush_dcache_all) @@ -335,7 +335,7 @@ ENTRY(v7_flush_kern_dcache_area) add r0, r0, r2 cmp r0, r1 blo 1b - dsb + dsb st mov pc, lr ENDPROC(v7_flush_kern_dcache_area) @@ -368,7 +368,7 @@ v7_dma_inv_range: add r0, r0, r2 cmp r0, r1 blo 1b - dsb + dsb st mov pc, lr ENDPROC(v7_dma_inv_range) @@ -390,7 +390,7 @@ v7_dma_clean_range: add r0, r0, r2 cmp r0, r1 blo 1b - dsb + dsb st mov pc, lr ENDPROC(v7_dma_clean_range) @@ -412,7 +412,7 @@ ENTRY(v7_dma_flush_range) add r0, r0, r2 cmp r0, r1 blo 1b - dsb + dsb st mov pc, lr ENDPROC(v7_dma_flush_range) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 6b00be1..b05e08c 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -904,11 +904,12 @@ static void __dma_page_dev_to_cpu(struct page *page, unsigned long off, unsigned long paddr = page_to_phys(page) + off; /* FIXME: non-speculating: not required */ - /* don't bother invalidating if DMA to device */ - if (dir != DMA_TO_DEVICE) + /* in any case, don't bother invalidating if DMA to device */ + if (dir != DMA_TO_DEVICE) { outer_inv_range(paddr, paddr + size); - dma_cache_maint_page(page, off, size, dir, dmac_unmap_area); + dma_cache_maint_page(page, off, size, dir, dmac_unmap_area); + } /* * Mark the D-cache clean for these pages to avoid extra flushing. diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 3387e60..43d54f5 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -104,17 +104,20 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig #define flush_icache_alias(pfn,vaddr,len) do { } while (0) #endif +#define FLAG_PA_IS_EXEC 1 +#define FLAG_PA_CORE_IN_MM 2 + static void flush_ptrace_access_other(void *args) { __flush_icache_all(); } -static -void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, - unsigned long uaddr, void *kaddr, unsigned long len) +static inline +void __flush_ptrace_access(struct page *page, unsigned long uaddr, void *kaddr, + unsigned long len, unsigned int flags) { if (cache_is_vivt()) { - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { + if (flags & FLAG_PA_CORE_IN_MM) { unsigned long addr = (unsigned long)kaddr; __cpuc_coherent_kern_range(addr, addr + len); } @@ -128,7 +131,7 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, } /* VIPT non-aliasing D-cache */ - if (vma->vm_flags & VM_EXEC) { + if (flags & FLAG_PA_IS_EXEC) { unsigned long addr = (unsigned long)kaddr; if (icache_is_vipt_aliasing()) flush_icache_alias(page_to_pfn(page), uaddr, len); @@ -140,6 +143,26 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, } } +static +void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, + unsigned long uaddr, void *kaddr, unsigned long len) +{ + unsigned int flags = 0; + if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) + flags |= FLAG_PA_CORE_IN_MM; + if (vma->vm_flags & VM_EXEC) + flags |= FLAG_PA_IS_EXEC; + __flush_ptrace_access(page, uaddr, kaddr, len, flags); +} + +void flush_uprobe_xol_access(struct page *page, unsigned long uaddr, + void *kaddr, unsigned long len) +{ + unsigned int flags = FLAG_PA_CORE_IN_MM|FLAG_PA_IS_EXEC; + + __flush_ptrace_access(page, uaddr, kaddr, len, flags); +} + /* * Copy user data from/to a page which is mapped into a different * processes address space. Really, we want to allow our "user diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index 21b9e1b..45aeaac 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -18,6 +18,21 @@ #include <asm/tlbflush.h> #include "mm.h" +pte_t *fixmap_page_table; + +static inline void set_fixmap_pte(int idx, pte_t pte) +{ + unsigned long vaddr = __fix_to_virt(idx); + set_pte_ext(fixmap_page_table + idx, pte, 0); + local_flush_tlb_kernel_page(vaddr); +} + +static inline pte_t get_fixmap_pte(unsigned long vaddr) +{ + unsigned long idx = __virt_to_fix(vaddr); + return *(fixmap_page_table + idx); +} + void *kmap(struct page *page) { might_sleep(); @@ -63,20 +78,20 @@ void *kmap_atomic(struct page *page) type = kmap_atomic_idx_push(); idx = type + KM_TYPE_NR * smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); + vaddr = __fix_to_virt(idx); #ifdef CONFIG_DEBUG_HIGHMEM /* * With debugging enabled, kunmap_atomic forces that entry to 0. * Make sure it was indeed properly unmapped. */ - BUG_ON(!pte_none(get_top_pte(vaddr))); + BUG_ON(!pte_none(*(fixmap_page_table + idx))); #endif /* * When debugging is off, kunmap_atomic leaves the previous mapping * in place, so the contained TLB flush ensures the TLB is updated * with the new mapping. */ - set_top_pte(vaddr, mk_pte(page, kmap_prot)); + set_fixmap_pte(idx, mk_pte(page, kmap_prot)); return (void *)vaddr; } @@ -94,8 +109,8 @@ void __kunmap_atomic(void *kvaddr) if (cache_is_vivt()) __cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE); #ifdef CONFIG_DEBUG_HIGHMEM - BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); - set_top_pte(vaddr, __pte(0)); + BUG_ON(vaddr != __fix_to_virt(idx)); + set_fixmap_pte(idx, __pte(0)); #else (void) idx; /* to kill a warning */ #endif @@ -117,11 +132,11 @@ void *kmap_atomic_pfn(unsigned long pfn) type = kmap_atomic_idx_push(); idx = type + KM_TYPE_NR * smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); + vaddr = __fix_to_virt(idx); #ifdef CONFIG_DEBUG_HIGHMEM - BUG_ON(!pte_none(get_top_pte(vaddr))); + BUG_ON(!pte_none(*(fixmap_page_table + idx))); #endif - set_top_pte(vaddr, pfn_pte(pfn, kmap_prot)); + set_fixmap_pte(idx, pfn_pte(pfn, kmap_prot)); return (void *)vaddr; } @@ -133,5 +148,5 @@ struct page *kmap_atomic_to_page(const void *ptr) if (vaddr < FIXADDR_START) return virt_to_page(ptr); - return pte_page(get_top_pte(vaddr)); + return pte_page(get_fixmap_pte(vaddr)); } diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 13ce33e..5958ac0 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -90,24 +90,21 @@ __tagtable(ATAG_INITRD2, parse_tag_initrd2); * initialization functions, as well as show_mem() for the skipping * of holes in the memory map. It is populated by arm_add_memory(). */ -struct meminfo meminfo; - void show_mem(unsigned int filter) { int free = 0, total = 0, reserved = 0; - int shared = 0, cached = 0, slab = 0, i; - struct meminfo * mi = &meminfo; + int shared = 0, cached = 0, slab = 0; + struct memblock_region *reg; printk("Mem-info:\n"); show_free_areas(filter); - for_each_bank (i, mi) { - struct membank *bank = &mi->bank[i]; + for_each_memblock (memory, reg) { unsigned int pfn1, pfn2; struct page *page, *end; - pfn1 = bank_pfn_start(bank); - pfn2 = bank_pfn_end(bank); + pfn1 = memblock_region_memory_base_pfn(reg); + pfn2 = memblock_region_memory_end_pfn(reg); page = pfn_to_page(pfn1); end = pfn_to_page(pfn2 - 1) + 1; @@ -124,8 +121,9 @@ void show_mem(unsigned int filter) free++; else shared += page_count(page) - 1; - page++; - } while (page < end); + pfn1++; + page = pfn_to_page(pfn1); + } while (pfn1 < pfn2); } printk("%d pages of RAM\n", total); @@ -139,16 +137,9 @@ void show_mem(unsigned int filter) static void __init find_limits(unsigned long *min, unsigned long *max_low, unsigned long *max_high) { - struct meminfo *mi = &meminfo; - int i; - - /* This assumes the meminfo array is properly sorted */ - *min = bank_pfn_start(&mi->bank[0]); - for_each_bank (i, mi) - if (mi->bank[i].highmem) - break; - *max_low = bank_pfn_end(&mi->bank[i - 1]); - *max_high = bank_pfn_end(&mi->bank[mi->nr_banks - 1]); + *max_low = PFN_DOWN(memblock_get_current_limit()); + *min = PFN_UP(memblock_start_of_DRAM()); + *max_high = PFN_DOWN(memblock_end_of_DRAM()); } #ifdef CONFIG_ZONE_DMA @@ -283,14 +274,8 @@ phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align) return phys; } -void __init arm_memblock_init(struct meminfo *mi, - const struct machine_desc *mdesc) +void __init arm_memblock_init(const struct machine_desc *mdesc) { - int i; - - for (i = 0; i < mi->nr_banks; i++) - memblock_add(mi->bank[i].start, mi->bank[i].size); - /* Register the kernel text, kernel data and initrd with memblock. */ #ifdef CONFIG_XIP_KERNEL memblock_reserve(__pa(_sdata), _end - _sdata); @@ -422,54 +407,53 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn) /* * The mem_map array can get very big. Free the unused area of the memory map. */ -static void __init free_unused_memmap(struct meminfo *mi) +static void __init free_unused_memmap(void) { - unsigned long bank_start, prev_bank_end = 0; - unsigned int i; + unsigned long start, prev_end = 0; + struct memblock_region *reg; /* * This relies on each bank being in address order. * The banks are sorted previously in bootmem_init(). */ - for_each_bank(i, mi) { - struct membank *bank = &mi->bank[i]; - - bank_start = bank_pfn_start(bank); + for_each_memblock(memory, reg) { + start = memblock_region_memory_base_pfn(reg); #ifdef CONFIG_SPARSEMEM /* * Take care not to free memmap entries that don't exist * due to SPARSEMEM sections which aren't present. */ - bank_start = min(bank_start, - ALIGN(prev_bank_end, PAGES_PER_SECTION)); + start = min(start, + ALIGN(prev_end, PAGES_PER_SECTION)); #else /* * Align down here since the VM subsystem insists that the * memmap entries are valid from the bank start aligned to * MAX_ORDER_NR_PAGES. */ - bank_start = round_down(bank_start, MAX_ORDER_NR_PAGES); + start = round_down(start, MAX_ORDER_NR_PAGES); #endif /* * If we had a previous bank, and there is a space * between the current bank and the previous, free it. */ - if (prev_bank_end && prev_bank_end < bank_start) - free_memmap(prev_bank_end, bank_start); + if (prev_end && prev_end < start) + free_memmap(prev_end, start); /* * Align up here since the VM subsystem insists that the * memmap entries are valid from the bank end aligned to * MAX_ORDER_NR_PAGES. */ - prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES); + prev_end = ALIGN(memblock_region_memory_end_pfn(reg), + MAX_ORDER_NR_PAGES); } #ifdef CONFIG_SPARSEMEM - if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION)) - free_memmap(prev_bank_end, - ALIGN(prev_bank_end, PAGES_PER_SECTION)); + if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION)) + free_memmap(prev_end, + ALIGN(prev_end, PAGES_PER_SECTION)); #endif } @@ -545,7 +529,7 @@ void __init mem_init(void) set_max_mapnr(pfn_to_page(max_pfn) - mem_map); /* this will put all unused low memory onto the freelists */ - free_unused_memmap(&meminfo); + free_unused_memmap(); free_all_bootmem(); #ifdef CONFIG_SA1111 diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index f9c32ba..d1e5ad7 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -438,6 +438,13 @@ void __arm_iounmap(volatile void __iomem *io_addr) EXPORT_SYMBOL(__arm_iounmap); #ifdef CONFIG_PCI +static int pci_ioremap_mem_type = MT_DEVICE; + +void pci_ioremap_set_mem_type(int mem_type) +{ + pci_ioremap_mem_type = mem_type; +} + int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr) { BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT); @@ -445,7 +452,7 @@ int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr) return ioremap_page_range(PCI_IO_VIRT_BASE + offset, PCI_IO_VIRT_BASE + offset + SZ_64K, phys_addr, - __pgprot(get_mem_type(MT_DEVICE)->prot_pte)); + __pgprot(get_mem_type(pci_ioremap_mem_type)->prot_pte)); } EXPORT_SYMBOL_GPL(pci_ioremap_io); #endif diff --git a/arch/arm/mm/l2c-common.c b/arch/arm/mm/l2c-common.c new file mode 100644 index 0000000..10a3cf2 --- /dev/null +++ b/arch/arm/mm/l2c-common.c @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2010 ARM Ltd. + * Written by Catalin Marinas <catalin.marinas@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/bug.h> +#include <linux/smp.h> +#include <asm/outercache.h> + +void outer_disable(void) +{ + WARN_ON(!irqs_disabled()); + WARN_ON(num_online_cpus() > 1); + + if (outer_cache.disable) + outer_cache.disable(); +} diff --git a/arch/arm/mm/l2c-l2x0-resume.S b/arch/arm/mm/l2c-l2x0-resume.S new file mode 100644 index 0000000..99b05f2 --- /dev/null +++ b/arch/arm/mm/l2c-l2x0-resume.S @@ -0,0 +1,58 @@ +/* + * L2C-310 early resume code. This can be used by platforms to restore + * the settings of their L2 cache controller before restoring the + * processor state. + * + * This code can only be used to if you are running in the secure world. + */ +#include <linux/linkage.h> +#include <asm/hardware/cache-l2x0.h> + + .text + +ENTRY(l2c310_early_resume) + adr r0, 1f + ldr r2, [r0] + add r0, r2, r0 + + ldmia r0, {r1, r2, r3, r4, r5, r6, r7, r8} + @ r1 = phys address of L2C-310 controller + @ r2 = aux_ctrl + @ r3 = tag_latency + @ r4 = data_latency + @ r5 = filter_start + @ r6 = filter_end + @ r7 = prefetch_ctrl + @ r8 = pwr_ctrl + + @ Check that the address has been initialised + teq r1, #0 + moveq pc, lr + + @ The prefetch and power control registers are revision dependent + @ and can be written whether or not the L2 cache is enabled + ldr r0, [r1, #L2X0_CACHE_ID] + and r0, r0, #L2X0_CACHE_ID_RTL_MASK + cmp r0, #L310_CACHE_ID_RTL_R2P0 + strcs r7, [r1, #L310_PREFETCH_CTRL] + cmp r0, #L310_CACHE_ID_RTL_R3P0 + strcs r8, [r1, #L310_POWER_CTRL] + + @ Don't setup the L2 cache if it is already enabled + ldr r0, [r1, #L2X0_CTRL] + tst r0, #L2X0_CTRL_EN + movne pc, lr + + str r3, [r1, #L310_TAG_LATENCY_CTRL] + str r4, [r1, #L310_DATA_LATENCY_CTRL] + str r6, [r1, #L310_ADDR_FILTER_END] + str r5, [r1, #L310_ADDR_FILTER_START] + + str r2, [r1, #L2X0_AUX_CTRL] + mov r9, #L2X0_CTRL_EN + str r9, [r1, #L2X0_CTRL] + mov pc, lr +ENDPROC(l2c310_early_resume) + + .align +1: .long l2x0_saved_regs - . diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index df875c4..ab14b79 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -35,6 +35,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/pci.h> +#include <asm/fixmap.h> #include "mm.h" #include "tcm.h" @@ -1074,74 +1075,47 @@ phys_addr_t arm_lowmem_limit __initdata = 0; void __init sanity_check_meminfo(void) { phys_addr_t memblock_limit = 0; - int i, j, highmem = 0; + int highmem = 0; phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1; + struct memblock_region *reg; - for (i = 0, j = 0; i < meminfo.nr_banks; i++) { - struct membank *bank = &meminfo.bank[j]; - phys_addr_t size_limit; - - *bank = meminfo.bank[i]; - size_limit = bank->size; + for_each_memblock(memory, reg) { + phys_addr_t block_start = reg->base; + phys_addr_t block_end = reg->base + reg->size; + phys_addr_t size_limit = reg->size; - if (bank->start >= vmalloc_limit) + if (reg->base >= vmalloc_limit) highmem = 1; else - size_limit = vmalloc_limit - bank->start; + size_limit = vmalloc_limit - reg->base; - bank->highmem = highmem; -#ifdef CONFIG_HIGHMEM - /* - * Split those memory banks which are partially overlapping - * the vmalloc area greatly simplifying things later. - */ - if (!highmem && bank->size > size_limit) { - if (meminfo.nr_banks >= NR_BANKS) { - printk(KERN_CRIT "NR_BANKS too low, " - "ignoring high memory\n"); - } else { - memmove(bank + 1, bank, - (meminfo.nr_banks - i) * sizeof(*bank)); - meminfo.nr_banks++; - i++; - bank[1].size -= size_limit; - bank[1].start = vmalloc_limit; - bank[1].highmem = highmem = 1; - j++; + if (!IS_ENABLED(CONFIG_HIGHMEM) || cache_is_vipt_aliasing()) { + + if (highmem) { + pr_notice("Ignoring RAM at %pa-%pa (!CONFIG_HIGHMEM)\n", + &block_start, &block_end); + memblock_remove(reg->base, reg->size); + continue; } - bank->size = size_limit; - } -#else - /* - * Highmem banks not allowed with !CONFIG_HIGHMEM. - */ - if (highmem) { - printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx " - "(!CONFIG_HIGHMEM).\n", - (unsigned long long)bank->start, - (unsigned long long)bank->start + bank->size - 1); - continue; - } - /* - * Check whether this memory bank would partially overlap - * the vmalloc area. - */ - if (bank->size > size_limit) { - printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx " - "to -%.8llx (vmalloc region overlap).\n", - (unsigned long long)bank->start, - (unsigned long long)bank->start + bank->size - 1, - (unsigned long long)bank->start + size_limit - 1); - bank->size = size_limit; + if (reg->size > size_limit) { + phys_addr_t overlap_size = reg->size - size_limit; + + pr_notice("Truncating RAM at %pa-%pa to -%pa", + &block_start, &block_end, &vmalloc_limit); + memblock_remove(vmalloc_limit, overlap_size); + block_end = vmalloc_limit; + } } -#endif - if (!bank->highmem) { - phys_addr_t bank_end = bank->start + bank->size; - if (bank_end > arm_lowmem_limit) - arm_lowmem_limit = bank_end; + if (!highmem) { + if (block_end > arm_lowmem_limit) { + if (reg->size > size_limit) + arm_lowmem_limit = vmalloc_limit; + else + arm_lowmem_limit = block_end; + } /* * Find the first non-section-aligned page, and point @@ -1157,35 +1131,15 @@ void __init sanity_check_meminfo(void) * occurs before any free memory is mapped. */ if (!memblock_limit) { - if (!IS_ALIGNED(bank->start, SECTION_SIZE)) - memblock_limit = bank->start; - else if (!IS_ALIGNED(bank_end, SECTION_SIZE)) - memblock_limit = bank_end; + if (!IS_ALIGNED(block_start, SECTION_SIZE)) + memblock_limit = block_start; + else if (!IS_ALIGNED(block_end, SECTION_SIZE)) + memblock_limit = arm_lowmem_limit; } - } - j++; - } -#ifdef CONFIG_HIGHMEM - if (highmem) { - const char *reason = NULL; - if (cache_is_vipt_aliasing()) { - /* - * Interactions between kmap and other mappings - * make highmem support with aliasing VIPT caches - * rather difficult. - */ - reason = "with VIPT aliasing cache"; - } - if (reason) { - printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n", - reason); - while (j > 0 && meminfo.bank[j - 1].highmem) - j--; } } -#endif - meminfo.nr_banks = j; + high_memory = __va(arm_lowmem_limit - 1) + 1; /* @@ -1372,6 +1326,9 @@ static void __init kmap_init(void) #ifdef CONFIG_HIGHMEM pkmap_page_table = early_pte_alloc(pmd_off_k(PKMAP_BASE), PKMAP_BASE, _PAGE_KERNEL_TABLE); + + fixmap_page_table = early_pte_alloc(pmd_off_k(FIXADDR_START), + FIXADDR_START, _PAGE_KERNEL_TABLE); #endif } @@ -1474,7 +1431,7 @@ void __init early_paging_init(const struct machine_desc *mdesc, * just complicate the code. */ flush_cache_louis(); - dsb(); + dsb(ishst); isb(); /* remap level 1 table */ diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 55764a7e..da1874f 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -88,30 +88,35 @@ static unsigned long irbar_read(void) void __init sanity_check_meminfo_mpu(void) { int i; - struct membank *bank = meminfo.bank; phys_addr_t phys_offset = PHYS_OFFSET; phys_addr_t aligned_region_size, specified_mem_size, rounded_mem_size; - - /* Initially only use memory continuous from PHYS_OFFSET */ - if (bank_phys_start(&bank[0]) != phys_offset) - panic("First memory bank must be contiguous from PHYS_OFFSET"); - - /* Banks have already been sorted by start address */ - for (i = 1; i < meminfo.nr_banks; i++) { - if (bank[i].start <= bank_phys_end(&bank[0]) && - bank_phys_end(&bank[i]) > bank_phys_end(&bank[0])) { - bank[0].size = bank_phys_end(&bank[i]) - bank[0].start; + struct memblock_region *reg; + bool first = true; + phys_addr_t mem_start; + phys_addr_t mem_end; + + for_each_memblock(memory, reg) { + if (first) { + /* + * Initially only use memory continuous from + * PHYS_OFFSET */ + if (reg->base != phys_offset) + panic("First memory bank must be contiguous from PHYS_OFFSET"); + + mem_start = reg->base; + mem_end = reg->base + reg->size; + specified_mem_size = reg->size; + first = false; } else { - pr_notice("Ignoring RAM after 0x%.8lx. " - "First non-contiguous (ignored) bank start: 0x%.8lx\n", - (unsigned long)bank_phys_end(&bank[0]), - (unsigned long)bank_phys_start(&bank[i])); - break; + /* + * memblock auto merges contiguous blocks, remove + * all blocks afterwards + */ + pr_notice("Ignoring RAM after %pa, memory at %pa ignored\n", + &mem_start, ®->base); + memblock_remove(reg->base, reg->size); } } - /* All contiguous banks are now merged in to the first bank */ - meminfo.nr_banks = 1; - specified_mem_size = bank[0].size; /* * MPU has curious alignment requirements: Size must be power of 2, and @@ -128,23 +133,24 @@ void __init sanity_check_meminfo_mpu(void) */ aligned_region_size = (phys_offset - 1) ^ (phys_offset); /* Find the max power-of-two sized region that fits inside our bank */ - rounded_mem_size = (1 << __fls(bank[0].size)) - 1; + rounded_mem_size = (1 << __fls(specified_mem_size)) - 1; /* The actual region size is the smaller of the two */ aligned_region_size = aligned_region_size < rounded_mem_size ? aligned_region_size + 1 : rounded_mem_size + 1; - if (aligned_region_size != specified_mem_size) - pr_warn("Truncating memory from 0x%.8lx to 0x%.8lx (MPU region constraints)", - (unsigned long)specified_mem_size, - (unsigned long)aligned_region_size); + if (aligned_region_size != specified_mem_size) { + pr_warn("Truncating memory from %pa to %pa (MPU region constraints)", + &specified_mem_size, &aligned_region_size); + memblock_remove(mem_start + aligned_region_size, + specified_mem_size - aligned_round_size); + + mem_end = mem_start + aligned_region_size; + } - meminfo.bank[0].size = aligned_region_size; - pr_debug("MPU Region from 0x%.8lx size 0x%.8lx (end 0x%.8lx))\n", - (unsigned long)phys_offset, - (unsigned long)aligned_region_size, - (unsigned long)bank_phys_end(&bank[0])); + pr_debug("MPU Region from %pa size %pa (end %pa))\n", + &phys_offset, &aligned_region_size, &mem_end); } @@ -292,7 +298,7 @@ void __init sanity_check_meminfo(void) { phys_addr_t end; sanity_check_meminfo_mpu(); - end = bank_phys_end(&meminfo.bank[meminfo.nr_banks - 1]); + end = memblock_end_of_DRAM(); high_memory = __va(end - 1) + 1; } diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 01a719e..22e3ad6 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -64,6 +64,14 @@ ENTRY(cpu_v7_switch_mm) mov pc, lr ENDPROC(cpu_v7_switch_mm) +#ifdef __ARMEB__ +#define rl r3 +#define rh r2 +#else +#define rl r2 +#define rh r3 +#endif + /* * cpu_v7_set_pte_ext(ptep, pte) * @@ -73,13 +81,13 @@ ENDPROC(cpu_v7_switch_mm) */ ENTRY(cpu_v7_set_pte_ext) #ifdef CONFIG_MMU - tst r2, #L_PTE_VALID + tst rl, #L_PTE_VALID beq 1f - tst r3, #1 << (57 - 32) @ L_PTE_NONE - bicne r2, #L_PTE_VALID + tst rh, #1 << (57 - 32) @ L_PTE_NONE + bicne rl, #L_PTE_VALID bne 1f - tst r3, #1 << (55 - 32) @ L_PTE_DIRTY - orreq r2, #L_PTE_RDONLY + tst rh, #1 << (55 - 32) @ L_PTE_DIRTY + orreq rl, #L_PTE_RDONLY 1: strd r2, r3, [r0] ALT_SMP(W(nop)) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 195731d..3db2c2f 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -169,9 +169,31 @@ ENDPROC(cpu_pj4b_do_idle) globl_equ cpu_pj4b_do_idle, cpu_v7_do_idle #endif globl_equ cpu_pj4b_dcache_clean_area, cpu_v7_dcache_clean_area - globl_equ cpu_pj4b_do_suspend, cpu_v7_do_suspend - globl_equ cpu_pj4b_do_resume, cpu_v7_do_resume - globl_equ cpu_pj4b_suspend_size, cpu_v7_suspend_size +#ifdef CONFIG_ARM_CPU_SUSPEND +ENTRY(cpu_pj4b_do_suspend) + stmfd sp!, {r6 - r10} + mrc p15, 1, r6, c15, c1, 0 @ save CP15 - extra features + mrc p15, 1, r7, c15, c2, 0 @ save CP15 - Aux Func Modes Ctrl 0 + mrc p15, 1, r8, c15, c1, 2 @ save CP15 - Aux Debug Modes Ctrl 2 + mrc p15, 1, r9, c15, c1, 1 @ save CP15 - Aux Debug Modes Ctrl 1 + mrc p15, 0, r10, c9, c14, 0 @ save CP15 - PMC + stmia r0!, {r6 - r10} + ldmfd sp!, {r6 - r10} + b cpu_v7_do_suspend +ENDPROC(cpu_pj4b_do_suspend) + +ENTRY(cpu_pj4b_do_resume) + ldmia r0!, {r6 - r10} + mcr p15, 1, r6, c15, c1, 0 @ save CP15 - extra features + mcr p15, 1, r7, c15, c2, 0 @ save CP15 - Aux Func Modes Ctrl 0 + mcr p15, 1, r8, c15, c1, 2 @ save CP15 - Aux Debug Modes Ctrl 2 + mcr p15, 1, r9, c15, c1, 1 @ save CP15 - Aux Debug Modes Ctrl 1 + mcr p15, 0, r10, c9, c14, 0 @ save CP15 - PMC + b cpu_v7_do_resume +ENDPROC(cpu_pj4b_do_resume) +#endif +.globl cpu_pj4b_suspend_size +.equ cpu_pj4b_suspend_size, 4 * 14 #endif @@ -194,6 +216,7 @@ __v7_cr7mp_setup: __v7_ca7mp_setup: __v7_ca12mp_setup: __v7_ca15mp_setup: +__v7_ca17mp_setup: mov r10, #0 1: #ifdef CONFIG_SMP @@ -505,6 +528,16 @@ __v7_ca15mp_proc_info: .size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info /* + * ARM Ltd. Cortex A17 processor. + */ + .type __v7_ca17mp_proc_info, #object +__v7_ca17mp_proc_info: + .long 0x410fc0e0 + .long 0xff0ffff0 + __v7_proc __v7_ca17mp_setup + .size __v7_ca17mp_proc_info, . - __v7_ca17mp_proc_info + + /* * Qualcomm Inc. Krait processors. */ .type __krait_proc_info, #object diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index 0c93588..1ca37c7 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -123,6 +123,11 @@ __v7m_setup: mov pc, lr ENDPROC(__v7m_setup) + .align 2 +__v7m_setup_stack: + .space 4 * 8 @ 8 registers +__v7m_setup_stack_top: + define_processor_functions v7m, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1 .section ".rodata" @@ -152,6 +157,3 @@ __v7m_proc_info: .long nop_cache_fns @ proc_info_list.cache .size __v7m_proc_info, . - __v7m_proc_info -__v7m_setup_stack: - .space 4 * 8 @ 8 registers -__v7m_setup_stack_top: |
