1 files changed, 0 insertions, 137 deletions
diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
deleted file mode 100644
index 41e9470..0000000
--- a/arch/arm/mach-ux500/dma-db5500.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
- * Author: Rabin Vincent <rabinv.vincent@stericsson.com> for ST-Ericsson
- *
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <plat/ste_dma40.h>
-#include <mach/setup.h>
-#include <mach/hardware.h>
-
-#include "ste-dma40-db5500.h"
-
-static struct resource dma40_resources[] = {
-	[0] = {
-		.start = U5500_DMA_BASE,
-		.end   = U5500_DMA_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "base",
-	},
-	[1] = {
-		.start = U5500_DMA_LCPA_BASE,
-		.end   = U5500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "lcpa",
-	},
-	[2] = {
-		.start = IRQ_DB5500_DMA,
-		.end   = IRQ_DB5500_DMA,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-/* Default configuration for physical memcpy */
-static struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
-	.mode = STEDMA40_MODE_PHYSICAL,
-	.dir = STEDMA40_MEM_TO_MEM,
-
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.src_info.psize = STEDMA40_PSIZE_PHY_1,
-	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
-	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/* Default configuration for logical memcpy */
-static struct stedma40_chan_cfg dma40_memcpy_conf_log = {
-	.dir = STEDMA40_MEM_TO_MEM,
-
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.src_info.psize = STEDMA40_PSIZE_LOG_1,
-	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
-	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/*
- * Mapping between soruce event lines and physical device address This was
- * created assuming that the event line is tied to a device and therefore the
- * address is constant, however this is not true for at least USB, and the
- * values are just placeholders for USB.  This table is preserved and used for
- * now.
- */
-static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = {
-	[DB5500_DMA_DEV24_SDMMC0_RX] = -1,
-	[DB5500_DMA_DEV38_USB_OTG_IEP_8] = -1,
-	[DB5500_DMA_DEV23_USB_OTG_IEP_7_15] = -1,
-	[DB5500_DMA_DEV22_USB_OTG_IEP_6_14] = -1,
-	[DB5500_DMA_DEV21_USB_OTG_IEP_5_13] = -1,
-	[DB5500_DMA_DEV20_USB_OTG_IEP_4_12] = -1,
-	[DB5500_DMA_DEV6_USB_OTG_IEP_3_11] = -1,
-	[DB5500_DMA_DEV5_USB_OTG_IEP_2_10] = -1,
-	[DB5500_DMA_DEV4_USB_OTG_IEP_1_9] = -1,
-};
-
-/* Mapping between destination event lines and physical device address */
-static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = {
-	[DB5500_DMA_DEV24_SDMMC0_TX] = -1,
-	[DB5500_DMA_DEV38_USB_OTG_OEP_8] = -1,
-	[DB5500_DMA_DEV23_USB_OTG_OEP_7_15] = -1,
-	[DB5500_DMA_DEV22_USB_OTG_OEP_6_14] = -1,
-	[DB5500_DMA_DEV21_USB_OTG_OEP_5_13] = -1,
-	[DB5500_DMA_DEV20_USB_OTG_OEP_4_12] = -1,
-	[DB5500_DMA_DEV6_USB_OTG_OEP_3_11] = -1,
-	[DB5500_DMA_DEV5_USB_OTG_OEP_2_10] = -1,
-	[DB5500_DMA_DEV4_USB_OTG_OEP_1_9] = -1,
-};
-
-static int dma40_memcpy_event[] = {
-	DB5500_DMA_MEMCPY_TX_1,
-	DB5500_DMA_MEMCPY_TX_2,
-	DB5500_DMA_MEMCPY_TX_3,
-	DB5500_DMA_MEMCPY_TX_4,
-	DB5500_DMA_MEMCPY_TX_5,
-};
-
-static struct stedma40_platform_data dma40_plat_data = {
-	.dev_len		= ARRAY_SIZE(dma40_rx_map),
-	.dev_rx			= dma40_rx_map,
-	.dev_tx			= dma40_tx_map,
-	.memcpy			= dma40_memcpy_event,
-	.memcpy_len		= ARRAY_SIZE(dma40_memcpy_event),
-	.memcpy_conf_phy	= &dma40_memcpy_conf_phy,
-	.memcpy_conf_log	= &dma40_memcpy_conf_log,
-	.disabled_channels	= {-1},
-};
-
-static struct platform_device dma40_device = {
-	.dev = {
-		.platform_data = &dma40_plat_data,
-	},
-	.name		= "dma40",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dma40_resources),
-	.resource	= dma40_resources
-};
-
-void __init db5500_dma_init(struct device *parent)
-{
-	int ret;
-
-	dma40_device.dev.parent = parent;
-	ret = platform_device_register(&dma40_device);
-	if (ret)
-		dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
-
-}