summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500/board-mop500.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ux500/board-mop500.c')
-rw-r--r--arch/arm/mach-ux500/board-mop500.c36
1 files changed, 33 insertions, 3 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index bb8d7b7..0e8fd13 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -13,19 +13,42 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
#include <linux/spi/spi.h>
+#include <linux/mfd/ab8500.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <plat/pincfg.h>
#include <plat/i2c.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
+#include "pins-db8500.h"
+
+static pin_cfg_t mop500_pins[] = {
+ /* SSP0 */
+ GPIO143_SSP0_CLK,
+ GPIO144_SSP0_FRM,
+ GPIO145_SSP0_RXD,
+ GPIO146_SSP0_TXD,
+
+ /* I2C */
+ GPIO147_I2C0_SCL,
+ GPIO148_I2C0_SDA,
+ GPIO16_I2C1_SCL,
+ GPIO17_I2C1_SDA,
+ GPIO10_I2C2_SDA,
+ GPIO11_I2C2_SCL,
+ GPIO229_I2C3_SDA,
+ GPIO230_I2C3_SCL,
+};
+
static void ab4500_spi_cs_control(u32 command)
{
/* set the FRM signal, which is CS - TODO */
@@ -48,15 +71,20 @@ struct pl022_config_chip ab4500_chip_info = {
.cs_control = ab4500_spi_cs_control,
};
+static struct ab8500_platform_data ab8500_platdata = {
+ .irq_base = MOP500_AB8500_IRQ_BASE,
+};
+
static struct spi_board_info u8500_spi_devices[] = {
{
.modalias = "ab8500",
.controller_data = &ab4500_chip_info,
+ .platform_data = &ab8500_platdata,
.max_speed_hz = 12000000,
.bus_num = 0,
.chip_select = 0,
.mode = SPI_MODE_0,
- .irq = IRQ_AB4500,
+ .irq = IRQ_DB8500_AB8500,
},
};
@@ -118,6 +146,10 @@ static void __init u8500_init_machine(void)
{
int i;
+ u8500_init_devices();
+
+ nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins));
+
u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
@@ -133,8 +165,6 @@ static void __init u8500_init_machine(void)
spi_register_board_info(u8500_spi_devices,
ARRAY_SIZE(u8500_spi_devices));
-
- u8500_init_devices();
}
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
OpenPOWER on IntegriCloud