summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-spear3xx/spear300.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-spear3xx/spear300.c')
-rw-r--r--arch/arm/mach-spear3xx/spear300.c82
1 files changed, 43 insertions, 39 deletions
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index 5aa2d54..2697e65 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -15,9 +15,9 @@
#include <linux/amba/pl061.h>
#include <linux/ptrace.h>
#include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/spear.h>
#include <plat/shirq.h>
+#include <mach/generic.h>
+#include <mach/hardware.h>
/* pad multiplexing support */
/* muxing registers */
@@ -310,7 +310,7 @@ struct pmx_dev pmx_telecom_boot_pins = {
.enb_on_reset = 1,
};
-struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = {
+struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = {
{
.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
@@ -323,14 +323,14 @@ struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = {
},
};
-struct pmx_dev pmx_telecom_sdio_4bit = {
- .name = "telecom_sdio_4bit",
- .modes = pmx_telecom_sdio_4bit_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_sdio_4bit_modes),
+struct pmx_dev pmx_telecom_sdhci_4bit = {
+ .name = "telecom_sdhci_4bit",
+ .modes = pmx_telecom_sdhci_4bit_modes,
+ .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes),
.enb_on_reset = 1,
};
-struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = {
+struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = {
{
.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
@@ -342,10 +342,10 @@ struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = {
},
};
-struct pmx_dev pmx_telecom_sdio_8bit = {
- .name = "telecom_sdio_8bit",
- .modes = pmx_telecom_sdio_8bit_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_sdio_8bit_modes),
+struct pmx_dev pmx_telecom_sdhci_8bit = {
+ .name = "telecom_sdhci_8bit",
+ .modes = pmx_telecom_sdhci_8bit_modes,
+ .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes),
.enb_on_reset = 1,
};
@@ -370,26 +370,6 @@ struct pmx_driver pmx_driver = {
.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
};
-/* Add spear300 specific devices here */
-/* arm gpio1 device registration */
-static struct pl061_platform_data gpio1_plat_data = {
- .gpio_base = 8,
- .irq_base = SPEAR_GPIO1_INT_BASE,
-};
-
-struct amba_device gpio1_device = {
- .dev = {
- .init_name = "gpio1",
- .platform_data = &gpio1_plat_data,
- },
- .res = {
- .start = SPEAR300_GPIO_BASE,
- .end = SPEAR300_GPIO_BASE + SPEAR300_GPIO_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {VIRQ_GPIO1, NO_IRQ},
-};
-
/* spear3xx shared irq */
struct shirq_dev_config shirq_ras1_config[] = {
{
@@ -443,6 +423,26 @@ struct spear_shirq shirq_ras1 = {
},
};
+/* Add spear300 specific devices here */
+/* arm gpio1 device registration */
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = SPEAR_GPIO1_INT_BASE,
+};
+
+struct amba_device gpio1_device = {
+ .dev = {
+ .init_name = "gpio1",
+ .platform_data = &gpio1_plat_data,
+ },
+ .res = {
+ .start = SPEAR300_GPIO_BASE,
+ .end = SPEAR300_GPIO_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {VIRQ_GPIO1, NO_IRQ},
+};
+
/* spear300 routines */
void __init spear300_init(void)
{
@@ -452,17 +452,21 @@ void __init spear300_init(void)
spear3xx_init();
/* shared irq registration */
- shirq_ras1.regs.base =
- ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
+ shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
if (shirq_ras1.regs.base) {
ret = spear_shirq_register(&shirq_ras1);
if (ret)
printk(KERN_ERR "Error registering Shared IRQ\n");
}
-}
-void spear300_pmx_init(void)
-{
- spear_pmx_init(&pmx_driver, SPEAR300_SOC_CONFIG_BASE,
- SPEAR300_SOC_CONFIG_SIZE);
+ /* pmx initialization */
+ pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
+ if (pmx_driver.base) {
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ printk(KERN_ERR "padmux: registeration failed. err no"
+ ": %d\n", ret);
+ /* Free Mapping, device selection already done */
+ iounmap(pmx_driver.base);
+ }
}
OpenPOWER on IntegriCloud