diff options
Diffstat (limited to 'arch/arm/mach-shmobile/board-ap4evb.c')
| -rw-r--r-- | arch/arm/mach-shmobile/board-ap4evb.c | 149 |
1 files changed, 115 insertions, 34 deletions
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 32d9e28..d440e5f 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -163,11 +163,13 @@ static struct mtd_partition nor_flash_partitions[] = { .name = "loader", .offset = 0x00000000, .size = 512 * 1024, + .mask_flags = MTD_WRITEABLE, }, { .name = "bootenv", .offset = MTDPART_OFS_APPEND, .size = 512 * 1024, + .mask_flags = MTD_WRITEABLE, }, { .name = "kernel_ro", @@ -565,34 +567,127 @@ static struct platform_device *qhd_devices[] __initdata = { /* FSI */ #define IRQ_FSI evt2irq(0x1840) +static int __fsi_set_rate(struct clk *clk, long rate, int enable) +{ + int ret = 0; + + if (rate <= 0) + return ret; + + if (enable) { + ret = clk_set_rate(clk, rate); + if (0 == ret) + ret = clk_enable(clk); + } else { + clk_disable(clk); + } + + return ret; +} -static int fsi_set_rate(int is_porta, int rate) +static int __fsi_set_round_rate(struct clk *clk, long rate, int enable) +{ + return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable); +} + +static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable) +{ + struct clk *fsia_ick; + struct clk *fsiack; + int ret = -EIO; + + fsia_ick = clk_get(dev, "icka"); + if (IS_ERR(fsia_ick)) + return PTR_ERR(fsia_ick); + + /* + * FSIACK is connected to AK4642, + * and use external clock pin from it. + * it is parent of fsia_ick now. + */ + fsiack = clk_get_parent(fsia_ick); + if (!fsiack) + goto fsia_ick_out; + + /* + * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick + * + ** FIXME ** + * Because the freq_table of external clk (fsiack) are all 0, + * the return value of clk_round_rate became 0. + * So, it use __fsi_set_rate here. + */ + ret = __fsi_set_rate(fsiack, rate, enable); + if (ret < 0) + goto fsiack_out; + + ret = __fsi_set_round_rate(fsia_ick, rate, enable); + if ((ret < 0) && enable) + __fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */ + +fsiack_out: + clk_put(fsiack); + +fsia_ick_out: + clk_put(fsia_ick); + + return 0; +} + +static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable) { struct clk *fsib_clk; struct clk *fdiv_clk = &sh7372_fsidivb_clk; + long fsib_rate = 0; + long fdiv_rate = 0; + int ackmd_bpfmd; int ret; - /* set_rate is not needed if port A */ - if (is_porta) - return 0; - - fsib_clk = clk_get(NULL, "fsib_clk"); - if (IS_ERR(fsib_clk)) - return -EINVAL; - switch (rate) { + case 44100: + fsib_rate = rate * 256; + ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + break; case 48000: - clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000)); - clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000)); - ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + fsib_rate = 85428000; /* around 48kHz x 256 x 7 */ + fdiv_rate = rate * 256; + ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; break; default: pr_err("unsupported rate in FSI2 port B\n"); - ret = -EINVAL; - break; + return -EINVAL; } + /* FSI B setting */ + fsib_clk = clk_get(dev, "ickb"); + if (IS_ERR(fsib_clk)) + return -EIO; + + ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable); clk_put(fsib_clk); + if (ret < 0) + return ret; + + /* FSI DIV setting */ + ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable); + if (ret < 0) { + /* disable FSI B */ + if (enable) + __fsi_set_round_rate(fsib_clk, fsib_rate, 0); + return ret; + } + + return ackmd_bpfmd; +} + +static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) +{ + int ret; + + if (is_porta) + ret = fsi_ak4642_set_rate(dev, rate, enable); + else + ret = fsi_hdmi_set_rate(dev, rate, enable); return ret; } @@ -874,6 +969,11 @@ static int __init hdmi_init_pm_clock(void) goto out; } + ret = clk_enable(&sh7372_pllc2_clk); + if (ret < 0) { + pr_err("Cannot enable pllc2 clock\n"); + goto out; + } pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); @@ -890,23 +990,11 @@ out: device_initcall(hdmi_init_pm_clock); -#define FSIACK_DUMMY_RATE 48000 static int __init fsi_init_pm_clock(void) { struct clk *fsia_ick; int ret; - /* - * FSIACK is connected to AK4642, - * and the rate is depend on playing sound rate. - * So, set dummy rate (= 48k) here - */ - ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE); - if (ret < 0) { - pr_err("Cannot set FSIACK dummy rate: %d\n", ret); - return ret; - } - fsia_ick = clk_get(&fsi_device.dev, "icka"); if (IS_ERR(fsia_ick)) { ret = PTR_ERR(fsia_ick); @@ -915,16 +1003,9 @@ static int __init fsi_init_pm_clock(void) } ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk); - if (ret < 0) { - pr_err("Cannot set FSI-A parent: %d\n", ret); - goto out; - } - - ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE); if (ret < 0) - pr_err("Cannot set FSI-A rate: %d\n", ret); + pr_err("Cannot set FSI-A parent: %d\n", ret); -out: clk_put(fsia_ick); return ret; |
