summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-sa1100/pleb.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-sa1100/pleb.c')
-rw-r--r--arch/arm/mach-sa1100/pleb.c154
1 files changed, 154 insertions, 0 deletions
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
new file mode 100644
index 0000000..5606bd7
--- /dev/null
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -0,0 +1,154 @@
+/*
+ * linux/arch/arm/mach-sa1100/pleb.c
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+
+#include <linux/mtd/partitions.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/serial_sa1100.h>
+#include <asm/arch/irqs.h>
+
+#include "generic.h"
+
+
+/*
+ * Ethernet IRQ mappings
+ */
+
+#define PLEB_ETH0_P (0x20000300) /* Ethernet 0 in PCMCIA0 IO */
+#define PLEB_ETH0_V (0xf6000300)
+
+#define GPIO_ETH0_IRQ GPIO_GPIO(21)
+#define GPIO_ETH0_EN GPIO_GPIO(26)
+
+#define IRQ_GPIO_ETH0_IRQ IRQ_GPIO21
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = PLEB_ETH0_P,
+ .end = PLEB_ETH0_P | 0x03ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+#if 0 /* Autoprobe instead, to get rising/falling edge characteristic right */
+ [1] = {
+ .start = IRQ_GPIO_ETH0_IRQ,
+ .end = IRQ_GPIO_ETH0_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+#endif
+};
+
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &smc91x_device,
+};
+
+
+/*
+ * Pleb's memory map
+ * has flash memory (typically 4 or 8 meg) selected by
+ * the two SA1100 lowest chip select outputs.
+ */
+static struct resource pleb_flash_resources[] = {
+ [0] = {
+ .start = SA1100_CS0_PHYS,
+ .end = SA1100_CS0_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = SA1100_CS1_PHYS,
+ .end = SA1100_CS1_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+
+static struct mtd_partition pleb_partitions[] = {
+ {
+ .name = "blob",
+ .offset = 0,
+ .size = 0x00020000,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x000e0000,
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x00300000,
+ }
+};
+
+
+static struct flash_platform_data pleb_flash_data = {
+ .map_name = "cfi_probe",
+ .parts = pleb_partitions,
+ .nr_parts = ARRAY_SIZE(pleb_partitions),
+};
+
+
+static void __init pleb_init(void)
+{
+ sa11x0_set_flash_data(&pleb_flash_data, pleb_flash_resources,
+ ARRAY_SIZE(pleb_flash_resources));
+
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+
+static void __init pleb_map_io(void)
+{
+ sa1100_map_io();
+
+ sa1100_register_uart(0, 3);
+ sa1100_register_uart(1, 1);
+
+ GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
+ GPDR |= GPIO_UART_TXD;
+ GPDR &= ~GPIO_UART_RXD;
+ PPAR |= PPAR_UPR;
+
+ /*
+ * Fix expansion memory timing for network card
+ */
+ MECR = ((2<<10) | (2<<5) | (2<<0));
+
+ /*
+ * Enable the SMC ethernet controller
+ */
+ GPDR |= GPIO_ETH0_EN; /* set to output */
+ GPCR = GPIO_ETH0_EN; /* clear MCLK (enable smc) */
+
+ GPDR &= ~GPIO_ETH0_IRQ;
+
+ set_irq_type(GPIO_ETH0_IRQ, IRQT_FALLING);
+}
+
+MACHINE_START(PLEB, "PLEB")
+ BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
+ MAPIO(pleb_map_io)
+ INITIRQ(sa1100_init_irq)
+ .timer = &sa1100_timer,
+ .init_machine = pleb_init,
+MACHINE_END
OpenPOWER on IntegriCloud