1 files changed, 0 insertions, 111 deletions
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
deleted file mode 100644
index 6a23524..0000000
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-hackkit.c
- *
- * based on leds-lart.c
- *
- * (C) Erik Mouw (J.A.K.Mouw@its.tudelft.nl), April 21, 2000
- * (C) Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>, 2002
- *
- * The HackKit has two leds (GPIO 22/23). The red led (gpio 22) is used
- * as cpu led, the green one is used as timer led.
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_GREEN    GPIO_GPIO23
-#define LED_RED    GPIO_GPIO22
-#define LED_MASK  (LED_RED | LED_GREEN)
-
-void hackkit_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-		case led_start:
-			/* pin 22/23 are outputs */
-			GPDR |= LED_MASK;
-			hw_led_state = LED_MASK;
-			led_state = LED_STATE_ENABLED;
-			break;
-
-		case led_stop:
-			led_state &= ~LED_STATE_ENABLED;
-			break;
-
-		case led_claim:
-			led_state |= LED_STATE_CLAIMED;
-			hw_led_state = LED_MASK;
-			break;
-
-		case led_release:
-			led_state &= ~LED_STATE_CLAIMED;
-			hw_led_state = LED_MASK;
-			break;
-
-#ifdef CONFIG_LEDS_TIMER
-		case led_timer:
-			if (!(led_state & LED_STATE_CLAIMED))
-				hw_led_state ^= LED_GREEN;
-			break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-		case led_idle_start:
-			/* The LART people like the LED to be off when the
-			   system is idle... */
-			if (!(led_state & LED_STATE_CLAIMED))
-				hw_led_state &= ~LED_RED;
-			break;
-
-		case led_idle_end:
-			/* ... and on if the system is not idle */
-			if (!(led_state & LED_STATE_CLAIMED))
-				hw_led_state |= LED_RED;
-			break;
-#endif
-
-		case led_red_on:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state &= ~LED_RED;
-			break;
-
-		case led_red_off:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state |= LED_RED;
-			break;
-
-		case led_green_on:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state &= ~LED_GREEN;
-			break;
-
-		case led_green_off:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state |= LED_GREEN;
-			break;
-
-		default:
-			break;
-	}
-
-	/* Now set the GPIO state, or nothing will happen at all */
-	if (led_state & LED_STATE_ENABLED) {
-		GPSR = hw_led_state;
-		GPCR = hw_led_state ^ LED_MASK;
-	}
-
-	local_irq_restore(flags);
-}