5 files changed, 15 insertions, 24 deletions
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
index 3ca0ecf..9cc47fd 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600.h
@@ -32,14 +32,14 @@ typedef int __bitwise pm_request_t;
 #define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
 
 /* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS     (SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS    SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS    SA1100_CS4_PHYS
+#define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS	SA1100_CS4_PHYS
 
 /* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT     0xf0000000
-#define H3600_BANK_2_VIRT    0xf1000000
-#define H3600_BANK_4_VIRT    0xf3800000
+#define H3600_EGPIO_VIRT	0xf0000000
+#define H3600_BANK_2_VIRT	0xf1000000
+#define H3600_BANK_4_VIRT	0xf3800000
 
 /*
    Machine-independent GPIO definitions
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
index b70846c..6071182 100644
--- a/arch/arm/mach-sa1100/include/mach/hardware.h
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -59,6 +59,10 @@
 # define __REG(x)	(*((volatile unsigned long *)io_p2v(x)))
 # define __PREG(x)	(io_v2p((unsigned long)&(x)))
 
+static inline unsigned long get_clock_tick_rate(void)
+{
+	return 3686400;
+}
 #else
 
 # define __REG(x)	io_p2v(x)
diff --git a/arch/arm/mach-sa1100/include/mach/io.h b/arch/arm/mach-sa1100/include/mach/io.h
index 0c070a6..d8b43f3 100644
--- a/arch/arm/mach-sa1100/include/mach/io.h
+++ b/arch/arm/mach-sa1100/include/mach/io.h
@@ -16,11 +16,7 @@
  * We don't actually have real ISA nor PCI buses, but there is so many 
  * drivers out there that might just work if we fake them...
  */
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
index 1c127b6..e9f8eed 100644
--- a/arch/arm/mach-sa1100/include/mach/memory.h
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -23,23 +23,12 @@ void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
 	sa1111_adjust_zones(node, size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_1M - 1)
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_1M)
 
 #endif
 #endif
 
 /*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- *
- * On the SA1100, bus addresses are equivalent to physical addresses.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-/*
  * Because of the wide memory address space between physical RAM banks on the
  * SA1100, it's much convenient to use Linux's SparseMEM support to implement
  * our memory map representation.  Assuming all memory nodes have equal access
diff --git a/arch/arm/mach-sa1100/include/mach/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
index eaa09e8..b3d6840 100644
--- a/arch/arm/mach-sa1100/include/mach/mtd-xip.h
+++ b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
@@ -15,6 +15,8 @@
 #ifndef __ARCH_SA1100_MTD_XIP_H__
 #define __ARCH_SA1100_MTD_XIP_H__
 
+#include <mach/hardware.h>
+
 #define xip_irqpending()	(ICIP & ICMR)
 
 /* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */