diff options
Diffstat (limited to 'arch/arm/mach-s3c24xx/irq.c')
| -rw-r--r-- | arch/arm/mach-s3c24xx/irq.c | 822 |
1 files changed, 822 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c new file mode 100644 index 0000000..cb9f5e0 --- /dev/null +++ b/arch/arm/mach-s3c24xx/irq.c @@ -0,0 +1,822 @@ +/* + * S3C24XX IRQ handling + * + * Copyright (c) 2003-2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/device.h> +#include <linux/irqdomain.h> + +#include <asm/mach/irq.h> + +#include <mach/regs-irq.h> +#include <mach/regs-gpio.h> + +#include <plat/cpu.h> +#include <plat/regs-irqtype.h> +#include <plat/pm.h> +#include <plat/irq.h> + +#define S3C_IRQTYPE_NONE 0 +#define S3C_IRQTYPE_EINT 1 +#define S3C_IRQTYPE_EDGE 2 +#define S3C_IRQTYPE_LEVEL 3 + +struct s3c_irq_data { + unsigned int type; + unsigned long parent_irq; + + /* data gets filled during init */ + struct s3c_irq_intc *intc; + unsigned long sub_bits; + struct s3c_irq_intc *sub_intc; +}; + +/* + * Sructure holding the controller data + * @reg_pending register holding pending irqs + * @reg_intpnd special register intpnd in main intc + * @reg_mask mask register + * @domain irq_domain of the controller + * @parent parent controller for ext and sub irqs + * @irqs irq-data, always s3c_irq_data[32] + */ +struct s3c_irq_intc { + void __iomem *reg_pending; + void __iomem *reg_intpnd; + void __iomem *reg_mask; + struct irq_domain *domain; + struct s3c_irq_intc *parent; + struct s3c_irq_data *irqs; +}; + +static void s3c_irq_mask(struct irq_data *data) +{ + struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_intc *parent_intc = intc->parent; + struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; + struct s3c_irq_data *parent_data; + unsigned long mask; + unsigned int irqno; + + mask = __raw_readl(intc->reg_mask); + mask |= (1UL << data->hwirq); + __raw_writel(mask, intc->reg_mask); + + if (parent_intc && irq_data->parent_irq) { + parent_data = &parent_intc->irqs[irq_data->parent_irq]; + + /* check to see if we need to mask the parent IRQ */ + if ((mask & parent_data->sub_bits) == parent_data->sub_bits) { + irqno = irq_find_mapping(parent_intc->domain, + irq_data->parent_irq); + s3c_irq_mask(irq_get_irq_data(irqno)); + } + } +} + +static void s3c_irq_unmask(struct irq_data *data) +{ + struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_intc *parent_intc = intc->parent; + struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; + unsigned long mask; + unsigned int irqno; + + mask = __raw_readl(intc->reg_mask); + mask &= ~(1UL << data->hwirq); + __raw_writel(mask, intc->reg_mask); + + if (parent_intc && irq_data->parent_irq) { + irqno = irq_find_mapping(parent_intc->domain, + irq_data->parent_irq); + s3c_irq_unmask(irq_get_irq_data(irqno)); + } +} + +static inline void s3c_irq_ack(struct irq_data *data) +{ + struct s3c_irq_intc *intc = data->domain->host_data; + unsigned long bitval = 1UL << data->hwirq; + + __raw_writel(bitval, intc->reg_pending); + if (intc->reg_intpnd) + __raw_writel(bitval, intc->reg_intpnd); +} + +static int s3c_irqext_type_set(void __iomem *gpcon_reg, + void __iomem *extint_reg, + unsigned long gpcon_offset, + unsigned long extint_offset, + unsigned int type) +{ + unsigned long newvalue = 0, value; + + /* Set the GPIO to external interrupt mode */ + value = __raw_readl(gpcon_reg); + value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset); + __raw_writel(value, gpcon_reg); + + /* Set the external interrupt to pointed trigger type */ + switch (type) + { + case IRQ_TYPE_NONE: + pr_warn("No edge setting!\n"); + break; + + case IRQ_TYPE_EDGE_RISING: + newvalue = S3C2410_EXTINT_RISEEDGE; + break; + + case IRQ_TYPE_EDGE_FALLING: + newvalue = S3C2410_EXTINT_FALLEDGE; + break; + + case IRQ_TYPE_EDGE_BOTH: + newvalue = S3C2410_EXTINT_BOTHEDGE; + break; + + case IRQ_TYPE_LEVEL_LOW: + newvalue = S3C2410_EXTINT_LOWLEV; + break; + + case IRQ_TYPE_LEVEL_HIGH: + newvalue = S3C2410_EXTINT_HILEV; + break; + + default: + pr_err("No such irq type %d", type); + return -EINVAL; + } + + value = __raw_readl(extint_reg); + value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset); + __raw_writel(value, extint_reg); + + return 0; +} + +/* FIXME: make static when it's out of plat-samsung/irq.h */ +int s3c_irqext_type(struct irq_data *data, unsigned int type) +{ + void __iomem *extint_reg; + void __iomem *gpcon_reg; + unsigned long gpcon_offset, extint_offset; + + if ((data->hwirq >= 4) && (data->hwirq <= 7)) { + gpcon_reg = S3C2410_GPFCON; + extint_reg = S3C24XX_EXTINT0; + gpcon_offset = (data->hwirq) * 2; + extint_offset = (data->hwirq) * 4; + } else if ((data->hwirq >= 8) && (data->hwirq <= 15)) { + gpcon_reg = S3C2410_GPGCON; + extint_reg = S3C24XX_EXTINT1; + gpcon_offset = (data->hwirq - 8) * 2; + extint_offset = (data->hwirq - 8) * 4; + } else if ((data->hwirq >= 16) && (data->hwirq <= 23)) { + gpcon_reg = S3C2410_GPGCON; + extint_reg = S3C24XX_EXTINT2; + gpcon_offset = (data->hwirq - 8) * 2; + extint_offset = (data->hwirq - 16) * 4; + } else { + return -EINVAL; + } + + return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, + extint_offset, type); +} + +static int s3c_irqext0_type(struct irq_data *data, unsigned int type) +{ + void __iomem *extint_reg; + void __iomem *gpcon_reg; + unsigned long gpcon_offset, extint_offset; + + if ((data->hwirq >= 0) && (data->hwirq <= 3)) { + gpcon_reg = S3C2410_GPFCON; + extint_reg = S3C24XX_EXTINT0; + gpcon_offset = (data->hwirq) * 2; + extint_offset = (data->hwirq) * 4; + } else { + return -EINVAL; + } + + return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, + extint_offset, type); +} + +struct irq_chip s3c_irq_chip = { + .name = "s3c", + .irq_ack = s3c_irq_ack, + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_set_wake = s3c_irq_wake +}; + +struct irq_chip s3c_irq_level_chip = { + .name = "s3c-level", + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_ack = s3c_irq_ack, +}; + +static struct irq_chip s3c_irqext_chip = { + .name = "s3c-ext", + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_ack = s3c_irq_ack, + .irq_set_type = s3c_irqext_type, + .irq_set_wake = s3c_irqext_wake +}; + +static struct irq_chip s3c_irq_eint0t4 = { + .name = "s3c-ext0", + .irq_ack = s3c_irq_ack, + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_set_wake = s3c_irq_wake, + .irq_set_type = s3c_irqext0_type, +}; + +static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct s3c_irq_intc *intc = desc->irq_data.domain->host_data; + struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq]; + struct s3c_irq_intc *sub_intc = irq_data->sub_intc; + unsigned long src; + unsigned long msk; + unsigned int n; + + chained_irq_enter(chip, desc); + + src = __raw_readl(sub_intc->reg_pending); + msk = __raw_readl(sub_intc->reg_mask); + + src &= ~msk; + src &= irq_data->sub_bits; + + while (src) { + n = __ffs(src); + src &= ~(1 << n); + generic_handle_irq(irq_find_mapping(sub_intc->domain, n)); + } + + chained_irq_exit(chip, desc); +} + +#ifdef CONFIG_FIQ +/** + * s3c24xx_set_fiq - set the FIQ routing + * @irq: IRQ number to route to FIQ on processor. + * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing. + * + * Change the state of the IRQ to FIQ routing depending on @irq and @on. If + * @on is true, the @irq is checked to see if it can be routed and the + * interrupt controller updated to route the IRQ. If @on is false, the FIQ + * routing is cleared, regardless of which @irq is specified. + */ +int s3c24xx_set_fiq(unsigned int irq, bool on) +{ + u32 intmod; + unsigned offs; + + if (on) { + offs = irq - FIQ_START; + if (offs > 31) + return -EINVAL; + + intmod = 1 << offs; + } else { + intmod = 0; + } + + __raw_writel(intmod, S3C2410_INTMOD); + return 0; +} + +EXPORT_SYMBOL_GPL(s3c24xx_set_fiq); +#endif + +static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct s3c_irq_intc *intc = h->host_data; + struct s3c_irq_data *irq_data = &intc->irqs[hw]; + struct s3c_irq_intc *parent_intc; + struct s3c_irq_data *parent_irq_data; + unsigned int irqno; + + if (!intc) { + pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw); + return -EINVAL; + } + + if (!irq_data) { + pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw); + return -EINVAL; + } + + /* attach controller pointer to irq_data */ + irq_data->intc = intc; + + /* set handler and flags */ + switch (irq_data->type) { + case S3C_IRQTYPE_NONE: + return 0; + case S3C_IRQTYPE_EINT: + if (irq_data->parent_irq) + irq_set_chip_and_handler(virq, &s3c_irqext_chip, + handle_edge_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_eint0t4, + handle_edge_irq); + break; + case S3C_IRQTYPE_EDGE: + if (irq_data->parent_irq || + intc->reg_pending == S3C2416_SRCPND2) + irq_set_chip_and_handler(virq, &s3c_irq_level_chip, + handle_edge_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_chip, + handle_edge_irq); + break; + case S3C_IRQTYPE_LEVEL: + if (irq_data->parent_irq) + irq_set_chip_and_handler(virq, &s3c_irq_level_chip, + handle_level_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_chip, + handle_level_irq); + break; + default: + pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type); + return -EINVAL; + } + set_irq_flags(virq, IRQF_VALID); + + if (irq_data->parent_irq) { + parent_intc = intc->parent; + if (!parent_intc) { + pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n", + hw); + goto err; + } + + parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; + if (!irq_data) { + pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", + hw); + goto err; + } + + parent_irq_data->sub_intc = intc; + parent_irq_data->sub_bits |= (1UL << hw); + + /* attach the demuxer to the parent irq */ + irqno = irq_find_mapping(parent_intc->domain, + irq_data->parent_irq); + if (!irqno) { + pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n", + irq_data->parent_irq); + goto err; + } + irq_set_chained_handler(irqno, s3c_irq_demux); + } + + return 0; + +err: + set_irq_flags(virq, 0); + + /* the only error can result from bad mapping data*/ + return -EINVAL; +} + +static struct irq_domain_ops s3c24xx_irq_ops = { + .map = s3c24xx_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + +static void s3c24xx_clear_intc(struct s3c_irq_intc *intc) +{ + void __iomem *reg_source; + unsigned long pend; + unsigned long last; + int i; + + /* if intpnd is set, read the next pending irq from there */ + reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending; + + last = 0; + for (i = 0; i < 4; i++) { + pend = __raw_readl(reg_source); + + if (pend == 0 || pend == last) + break; + + __raw_writel(pend, intc->reg_pending); + if (intc->reg_intpnd) + __raw_writel(pend, intc->reg_intpnd); + + pr_info("irq: clearing pending status %08x\n", (int)pend); + last = pend; + } +} + +struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, + struct s3c_irq_data *irq_data, + struct s3c_irq_intc *parent, + unsigned long address) +{ + struct s3c_irq_intc *intc; + void __iomem *base = (void *)0xf6000000; /* static mapping */ + int irq_num; + int irq_start; + int irq_offset; + int ret; + + intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); + if (!intc) + return ERR_PTR(-ENOMEM); + + intc->irqs = irq_data; + + if (parent) + intc->parent = parent; + + /* select the correct data for the controller. + * Need to hard code the irq num start and offset + * to preserve the static mapping for now + */ + switch (address) { + case 0x4a000000: + pr_debug("irq: found main intc\n"); + intc->reg_pending = base; + intc->reg_mask = base + 0x08; + intc->reg_intpnd = base + 0x10; + irq_num = 32; + irq_start = S3C2410_IRQ(0); + irq_offset = 0; + break; + case 0x4a000018: + pr_debug("irq: found subintc\n"); + intc->reg_pending = base + 0x18; + intc->reg_mask = base + 0x1c; + irq_num = 29; + irq_start = S3C2410_IRQSUB(0); + irq_offset = 0; + break; + case 0x4a000040: + pr_debug("irq: found intc2\n"); + intc->reg_pending = base + 0x40; + intc->reg_mask = base + 0x48; + intc->reg_intpnd = base + 0x50; + irq_num = 8; + irq_start = S3C2416_IRQ(0); + irq_offset = 0; + break; + case 0x560000a4: + pr_debug("irq: found eintc\n"); + base = (void *)0xfd000000; + + intc->reg_mask = base + 0xa4; + intc->reg_pending = base + 0x08; + irq_num = 20; + irq_start = S3C2410_IRQ(32); + irq_offset = 4; + break; + default: + pr_err("irq: unsupported controller address\n"); + ret = -EINVAL; + goto err; + } + + /* now that all the data is complete, init the irq-domain */ + s3c24xx_clear_intc(intc); + intc->domain = irq_domain_add_legacy(np, irq_num, irq_start, + irq_offset, &s3c24xx_irq_ops, + intc); + if (!intc->domain) { + pr_err("irq: could not create irq-domain\n"); + ret = -EINVAL; + goto err; + } + + return intc; + +err: + kfree(intc); + return ERR_PTR(ret); +} + +/* s3c24xx_init_irq + * + * Initialise S3C2410 IRQ system +*/ + +static struct s3c_irq_data init_base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_eint[32] = { + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ +}; + +static struct s3c_irq_data init_subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ +}; + +void __init s3c24xx_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); +} + +#ifdef CONFIG_CPU_S3C2416 +static struct s3c_irq_data init_s3c2416base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ + { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_NONE, }, + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2416subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ +}; + +static struct s3c_irq_data init_s3c2416_second[32] = { + { .type = S3C_IRQTYPE_EDGE }, /* 2D */ + { .type = S3C_IRQTYPE_EDGE }, /* IIC1 */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */ + { .type = S3C_IRQTYPE_EDGE }, /* PCM1 */ + { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */ + { .type = S3C_IRQTYPE_EDGE }, /* I2S1 */ +}; + +void __init s3c2416_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + + pr_info("S3C2416: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018); + + s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040); +} + +#endif + +#ifdef CONFIG_CPU_S3C2443 +static struct s3c_irq_data init_s3c2443base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ + { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* CFON */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + + +static struct s3c_irq_data init_s3c2443subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ +}; + +void __init s3c2443_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + + pr_info("S3C2443: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018); +} +#endif |
