diff options
Diffstat (limited to 'arch/arm/mach-s3c2410')
| -rw-r--r-- | arch/arm/mach-s3c2410/bast-irq.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/h1940-bluetooth.c | 11 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/include/mach/dma.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/include/mach/h1940.h | 3 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/include/mach/memory.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/include/mach/regs-mem.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/mach-h1940.c | 327 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/mach-n30.c | 23 |
8 files changed, 309 insertions, 67 deletions
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index 606cb6b..bc53d2d 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -147,15 +147,15 @@ static __init int bast_irq_init(void) __raw_writeb(0x0, BAST_VA_PC104_IRQMASK); - set_irq_chained_handler(IRQ_ISA, bast_irq_pc104_demux); + irq_set_chained_handler(IRQ_ISA, bast_irq_pc104_demux); /* register our IRQs */ for (i = 0; i < 4; i++) { unsigned int irqno = bast_pc104_irqs[i]; - set_irq_chip(irqno, &bast_pc104_chip); - set_irq_handler(irqno, handle_level_irq); + irq_set_chip_and_handler(irqno, &bast_pc104_chip, + handle_level_irq); set_irq_flags(irqno, IRQF_VALID); } } diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 6b86a72..2c126bb 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -18,12 +18,14 @@ #include <linux/leds.h> #include <linux/gpio.h> #include <linux/rfkill.h> +#include <linux/leds.h> #include <mach/regs-gpio.h> #include <mach/hardware.h> #include <mach/h1940-latch.h> +#include <mach/h1940.h> -#define DRV_NAME "h1940-bt" +#define DRV_NAME "h1940-bt" /* Bluetooth control */ static void h1940bt_enable(int on) @@ -37,6 +39,8 @@ static void h1940bt_enable(int on) gpio_set_value(S3C2410_GPH(1), 1); mdelay(10); gpio_set_value(S3C2410_GPH(1), 0); + + h1940_led_blink_set(-EINVAL, GPIO_LED_BLINK, NULL, NULL); } else { gpio_set_value(S3C2410_GPH(1), 1); @@ -44,6 +48,8 @@ static void h1940bt_enable(int on) gpio_set_value(S3C2410_GPH(1), 0); mdelay(10); gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0); + + h1940_led_blink_set(-EINVAL, GPIO_LED_NO_BLINK_LOW, NULL, NULL); } } @@ -85,7 +91,6 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE); - rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH, &h1940bt_rfkill_ops, NULL); if (!rfk) { @@ -93,8 +98,6 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) goto err_rfk_alloc; } - rfkill_set_led_trigger_name(rfk, "h1940-bluetooth"); - ret = rfkill_register(rfk); if (ret) goto err_rfkill; diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index cf68136..b2b2a5b 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -19,7 +19,7 @@ #define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ /* We use `virtual` dma channels to hide the fact we have only a limited - * number of DMA channels, and not of all of them (dependant on the device) + * number of DMA channels, and not of all of them (dependent on the device) * can be attached to any DMA source. We therefore let the DMA core handle * the allocation of hardware channels to clients. */ diff --git a/arch/arm/mach-s3c2410/include/mach/h1940.h b/arch/arm/mach-s3c2410/include/mach/h1940.h index 4559784..2aa683c 100644 --- a/arch/arm/mach-s3c2410/include/mach/h1940.h +++ b/arch/arm/mach-s3c2410/include/mach/h1940.h @@ -17,5 +17,8 @@ #define H1940_SUSPEND_CHECK (0x30080000) extern void h1940_pm_return(void); +extern int h1940_led_blink_set(unsigned gpio, int state, + unsigned long *delay_on, unsigned long *delay_off); + #endif /* __ASM_ARCH_H1940_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h index 6f1e587..f92b97b 100644 --- a/arch/arm/mach-s3c2410/include/mach/memory.h +++ b/arch/arm/mach-s3c2410/include/mach/memory.h @@ -11,6 +11,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x30000000) +#define PLAT_PHYS_OFFSET UL(0x30000000) #endif diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h index 7f7c529..988a686 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h @@ -101,7 +101,7 @@ #define S3C2410_BANKCON_PMC16 (0x03) /* bank configurations for banks 0..7, note banks - * 6 and 7 have differnt configurations depending on + * 6 and 7 have different configurations depending on * the memory type bits */ #define S3C2410_BANKCON_Tacp2 (0x0 << 2) diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 1a81fe1..2a2fa06 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -23,8 +23,15 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> #include <linux/pwm_backlight.h> #include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/pda_power.h> +#include <linux/s3c_adc_battery.h> +#include <linux/delay.h> + #include <video/platform_lcd.h> #include <linux/mmc/host.h> @@ -162,29 +169,10 @@ struct gpio_chip h1940_latch_gpiochip = { .get = h1940_gpiolib_latch_get, }; -static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd) -{ - printk(KERN_DEBUG "udc: pullup(%d)\n",cmd); - - switch (cmd) - { - case S3C2410_UDC_P_ENABLE : - gpio_set_value(H1940_LATCH_USB_DP, 1); - break; - case S3C2410_UDC_P_DISABLE : - gpio_set_value(H1940_LATCH_USB_DP, 0); - break; - case S3C2410_UDC_P_RESET : - break; - default: - break; - } -} - static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = { - .udc_command = h1940_udc_pullup, .vbus_pin = S3C2410_GPG(5), .vbus_pin_inverted = 1, + .pullup_pin = H1940_LATCH_USB_DP, }; static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = { @@ -222,20 +210,239 @@ static struct s3c2410fb_mach_info h1940_fb_info __initdata = { .num_displays = 1, .default_display = 0, - .lpcsel= 0x02, - .gpccon= 0xaa940659, - .gpccon_mask= 0xffffffff, - .gpcup= 0x0000ffff, - .gpcup_mask= 0xffffffff, - .gpdcon= 0xaa84aaa0, - .gpdcon_mask= 0xffffffff, - .gpdup= 0x0000faff, - .gpdup_mask= 0xffffffff, + .lpcsel = 0x02, + .gpccon = 0xaa940659, + .gpccon_mask = 0xffffc0f0, + .gpcup = 0x0000ffff, + .gpcup_mask = 0xffffffff, + .gpdcon = 0xaa84aaa0, + .gpdcon_mask = 0xffffffff, + .gpdup = 0x0000faff, + .gpdup_mask = 0xffffffff, }; -static struct platform_device h1940_device_leds = { - .name = "h1940-leds", +static int power_supply_init(struct device *dev) +{ + return gpio_request(S3C2410_GPF(2), "cable plugged"); +} + +static int h1940_is_ac_online(void) +{ + return !gpio_get_value(S3C2410_GPF(2)); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(S3C2410_GPF(2)); +} + +static char *h1940_supplicants[] = { + "main-battery", + "backup-battery", +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = h1940_is_ac_online, + .exit = power_supply_exit, + .supplied_to = h1940_supplicants, + .num_supplicants = ARRAY_SIZE(h1940_supplicants), +}; + +static struct resource power_supply_resources[] = { + [0] = { + .name = "ac", + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE | + IORESOURCE_IRQ_HIGHEDGE, + .start = IRQ_EINT2, + .end = IRQ_EINT2, + }, +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = + &power_supply_info, + }, + .resource = power_supply_resources, + .num_resources = ARRAY_SIZE(power_supply_resources), +}; + +static const struct s3c_adc_bat_thresh bat_lut_noac[] = { + { .volt = 4070, .cur = 162, .level = 100}, + { .volt = 4040, .cur = 165, .level = 95}, + { .volt = 4016, .cur = 164, .level = 90}, + { .volt = 3996, .cur = 166, .level = 85}, + { .volt = 3971, .cur = 168, .level = 80}, + { .volt = 3951, .cur = 168, .level = 75}, + { .volt = 3931, .cur = 170, .level = 70}, + { .volt = 3903, .cur = 172, .level = 65}, + { .volt = 3886, .cur = 172, .level = 60}, + { .volt = 3858, .cur = 176, .level = 55}, + { .volt = 3842, .cur = 176, .level = 50}, + { .volt = 3818, .cur = 176, .level = 45}, + { .volt = 3789, .cur = 180, .level = 40}, + { .volt = 3769, .cur = 180, .level = 35}, + { .volt = 3749, .cur = 184, .level = 30}, + { .volt = 3732, .cur = 184, .level = 25}, + { .volt = 3716, .cur = 184, .level = 20}, + { .volt = 3708, .cur = 184, .level = 15}, + { .volt = 3716, .cur = 96, .level = 10}, + { .volt = 3700, .cur = 96, .level = 5}, + { .volt = 3684, .cur = 96, .level = 0}, +}; + +static const struct s3c_adc_bat_thresh bat_lut_acin[] = { + { .volt = 4130, .cur = 0, .level = 100}, + { .volt = 3982, .cur = 0, .level = 50}, + { .volt = 3854, .cur = 0, .level = 10}, + { .volt = 3841, .cur = 0, .level = 0}, +}; + +int h1940_bat_init(void) +{ + int ret; + + ret = gpio_request(H1940_LATCH_SM803_ENABLE, "h1940-charger-enable"); + if (ret) + return ret; + gpio_direction_output(H1940_LATCH_SM803_ENABLE, 0); + + return 0; + +} + +void h1940_bat_exit(void) +{ + gpio_free(H1940_LATCH_SM803_ENABLE); +} + +void h1940_enable_charger(void) +{ + gpio_set_value(H1940_LATCH_SM803_ENABLE, 1); +} + +void h1940_disable_charger(void) +{ + gpio_set_value(H1940_LATCH_SM803_ENABLE, 0); +} + +static struct s3c_adc_bat_pdata h1940_bat_cfg = { + .init = h1940_bat_init, + .exit = h1940_bat_exit, + .enable_charger = h1940_enable_charger, + .disable_charger = h1940_disable_charger, + .gpio_charge_finished = S3C2410_GPF(3), + .gpio_inverted = 1, + .lut_noac = bat_lut_noac, + .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac), + .lut_acin = bat_lut_acin, + .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin), + .volt_channel = 0, + .current_channel = 1, + .volt_mult = 4056, + .current_mult = 1893, + .internal_impedance = 200, + .backup_volt_channel = 3, + /* TODO Check backup volt multiplier */ + .backup_volt_mult = 4056, + .backup_volt_min = 0, + .backup_volt_max = 4149288 +}; + +static struct platform_device h1940_battery = { + .name = "s3c-adc-battery", .id = -1, + .dev = { + .parent = &s3c_device_adc.dev, + .platform_data = &h1940_bat_cfg, + }, +}; + +DEFINE_SPINLOCK(h1940_blink_spin); + +int h1940_led_blink_set(unsigned gpio, int state, + unsigned long *delay_on, unsigned long *delay_off) +{ + int blink_gpio, check_gpio1, check_gpio2; + + switch (gpio) { + case H1940_LATCH_LED_GREEN: + blink_gpio = S3C2410_GPA(7); + check_gpio1 = S3C2410_GPA(1); + check_gpio2 = S3C2410_GPA(3); + break; + case H1940_LATCH_LED_RED: + blink_gpio = S3C2410_GPA(1); + check_gpio1 = S3C2410_GPA(7); + check_gpio2 = S3C2410_GPA(3); + break; + default: + blink_gpio = S3C2410_GPA(3); + check_gpio1 = S3C2410_GPA(1); + check_gpio1 = S3C2410_GPA(7); + break; + } + + if (delay_on && delay_off && !*delay_on && !*delay_off) + *delay_on = *delay_off = 500; + + spin_lock(&h1940_blink_spin); + + switch (state) { + case GPIO_LED_NO_BLINK_LOW: + case GPIO_LED_NO_BLINK_HIGH: + if (!gpio_get_value(check_gpio1) && + !gpio_get_value(check_gpio2)) + gpio_set_value(H1940_LATCH_LED_FLASH, 0); + gpio_set_value(blink_gpio, 0); + if (gpio_is_valid(gpio)) + gpio_set_value(gpio, state); + break; + case GPIO_LED_BLINK: + if (gpio_is_valid(gpio)) + gpio_set_value(gpio, 0); + gpio_set_value(H1940_LATCH_LED_FLASH, 1); + gpio_set_value(blink_gpio, 1); + break; + } + + spin_unlock(&h1940_blink_spin); + + return 0; +} +EXPORT_SYMBOL(h1940_led_blink_set); + +static struct gpio_led h1940_leds_desc[] = { + { + .name = "Green", + .default_trigger = "main-battery-full", + .gpio = H1940_LATCH_LED_GREEN, + .retain_state_suspended = 1, + }, + { + .name = "Red", + .default_trigger + = "main-battery-charging-blink-full-solid", + .gpio = H1940_LATCH_LED_RED, + .retain_state_suspended = 1, + }, +}; + +static struct gpio_led_platform_data h1940_leds_pdata = { + .num_leds = ARRAY_SIZE(h1940_leds_desc), + .leds = h1940_leds_desc, + .gpio_blink_set = h1940_led_blink_set, +}; + +static struct platform_device h1940_device_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &h1940_leds_pdata, + }, }; static struct platform_device h1940_device_bluetooth = { @@ -321,14 +528,14 @@ static struct platform_device h1940_backlight = { static void h1940_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) { - int value; + int value, retries = 100; if (!power) { gpio_set_value(S3C2410_GPC(0), 0); /* wait for 3ac */ do { value = gpio_get_value(S3C2410_GPC(6)); - } while (value); + } while (value && retries--); gpio_set_value(H1940_LATCH_LCD_P2, 0); gpio_set_value(H1940_LATCH_LCD_P3, 0); @@ -346,6 +553,9 @@ static void h1940_lcd_power_set(struct plat_lcd_data *pd, gpio_set_value(H1940_LATCH_LCD_P0, 1); gpio_set_value(H1940_LATCH_LCD_P1, 1); + gpio_direction_input(S3C2410_GPC(1)); + gpio_direction_input(S3C2410_GPC(4)); + mdelay(10); s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2)); s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2)); @@ -381,7 +591,44 @@ static struct i2c_board_info h1940_i2c_devices[] = { }, }; +#define DECLARE_BUTTON(p, k, n, w) \ + { \ + .gpio = p, \ + .code = k, \ + .desc = n, \ + .wakeup = w, \ + .active_low = 1, \ + } + +static struct gpio_keys_button h1940_buttons[] = { + DECLARE_BUTTON(S3C2410_GPF(0), KEY_POWER, "Power", 1), + DECLARE_BUTTON(S3C2410_GPF(6), KEY_ENTER, "Select", 1), + DECLARE_BUTTON(S3C2410_GPF(7), KEY_RECORD, "Record", 0), + DECLARE_BUTTON(S3C2410_GPG(0), KEY_F11, "Calendar", 0), + DECLARE_BUTTON(S3C2410_GPG(2), KEY_F12, "Contacts", 0), + DECLARE_BUTTON(S3C2410_GPG(3), KEY_MAIL, "Mail", 0), + DECLARE_BUTTON(S3C2410_GPG(6), KEY_LEFT, "Left_arrow", 0), + DECLARE_BUTTON(S3C2410_GPG(7), KEY_HOMEPAGE, "Home", 0), + DECLARE_BUTTON(S3C2410_GPG(8), KEY_RIGHT, "Right_arrow", 0), + DECLARE_BUTTON(S3C2410_GPG(9), KEY_UP, "Up_arrow", 0), + DECLARE_BUTTON(S3C2410_GPG(10), KEY_DOWN, "Down_arrow", 0), +}; + +static struct gpio_keys_platform_data h1940_buttons_data = { + .buttons = h1940_buttons, + .nbuttons = ARRAY_SIZE(h1940_buttons), +}; + +static struct platform_device h1940_dev_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &h1940_buttons_data, + } +}; + static struct platform_device *h1940_devices[] __initdata = { + &h1940_dev_buttons, &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, @@ -398,6 +645,8 @@ static struct platform_device *h1940_devices[] __initdata = { &h1940_lcd_powerdev, &s3c_device_adc, &s3c_device_ts, + &power_supply, + &h1940_battery, }; static void __init h1940_map_io(void) @@ -475,14 +724,20 @@ static void __init h1940_init(void) gpio_direction_output(H1940_LATCH_LCD_P4, 0); gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0); - gpio_request(H1940_LATCH_USB_DP, "USB pullup"); - gpio_direction_output(H1940_LATCH_USB_DP, 0); - gpio_request(H1940_LATCH_SD_POWER, "SD power"); gpio_direction_output(H1940_LATCH_SD_POWER, 0); platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); + gpio_request(S3C2410_GPA(1), "Red LED blink"); + gpio_request(S3C2410_GPA(3), "Blue LED blink"); + gpio_request(S3C2410_GPA(7), "Green LED blink"); + gpio_request(H1940_LATCH_LED_FLASH, "LED blink"); + gpio_direction_output(S3C2410_GPA(1), 0); + gpio_direction_output(S3C2410_GPA(3), 0); + gpio_direction_output(S3C2410_GPA(7), 0); + gpio_direction_output(H1940_LATCH_LED_FLASH, 0); + i2c_register_board_info(0, h1940_i2c_devices, ARRAY_SIZE(h1940_i2c_devices)); } diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 271b9aa..079dcaa 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -84,26 +84,10 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = { }, }; -static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd) -{ - switch (cmd) { - case S3C2410_UDC_P_ENABLE : - gpio_set_value(S3C2410_GPB(3), 1); - break; - case S3C2410_UDC_P_DISABLE : - gpio_set_value(S3C2410_GPB(3), 0); - break; - case S3C2410_UDC_P_RESET : - break; - default: - break; - } -} - static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = { - .udc_command = n30_udc_pullup, .vbus_pin = S3C2410_GPG(1), .vbus_pin_inverted = 0, + .pullup_pin = S3C2410_GPB(3), }; static struct gpio_keys_button n30_buttons[] = { @@ -268,7 +252,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = { .def_trigger = "", }; -/* This is the blue LED on the device. Originaly used to indicate GPS activity +/* This is the blue LED on the device. Originally used to indicate GPS activity * by flashing. */ static struct s3c24xx_led_platdata n35_blue_led_pdata = { .name = "blue_led", @@ -596,9 +580,6 @@ static void __init n30_init(void) platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices)); } - - WARN_ON(gpio_request(S3C2410_GPB(3), "udc pup")); - gpio_direction_output(S3C2410_GPB(3), 0); } MACHINE_START(N30, "Acer-N30") |
