summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa')
-rw-r--r--arch/arm/mach-pxa/Kconfig638
-rw-r--r--arch/arm/mach-pxa/Makefile90
-rw-r--r--arch/arm/mach-pxa/balloon3.c4
-rw-r--r--arch/arm/mach-pxa/cm-x2xx.c4
-rw-r--r--arch/arm/mach-pxa/cm-x300.c260
-rw-r--r--arch/arm/mach-pxa/colibri-pxa270.c3
-rw-r--r--arch/arm/mach-pxa/colibri-pxa300.c4
-rw-r--r--arch/arm/mach-pxa/colibri-pxa320.c4
-rw-r--r--arch/arm/mach-pxa/colibri-pxa3xx.c2
-rw-r--r--arch/arm/mach-pxa/corgi.c4
-rw-r--r--arch/arm/mach-pxa/corgi_pm.c4
-rw-r--r--arch/arm/mach-pxa/csb726.c3
-rw-r--r--arch/arm/mach-pxa/devices.c30
-rw-r--r--arch/arm/mach-pxa/e330.c3
-rw-r--r--arch/arm/mach-pxa/e350.c3
-rw-r--r--arch/arm/mach-pxa/e400.c3
-rw-r--r--arch/arm/mach-pxa/e740.c3
-rw-r--r--arch/arm/mach-pxa/e750.c3
-rw-r--r--arch/arm/mach-pxa/e800.c3
-rw-r--r--arch/arm/mach-pxa/em-x270.c13
-rw-r--r--arch/arm/mach-pxa/ezx.c251
-rw-r--r--arch/arm/mach-pxa/generic.h5
-rw-r--r--arch/arm/mach-pxa/gumstix.c5
-rw-r--r--arch/arm/mach-pxa/h5000.c3
-rw-r--r--arch/arm/mach-pxa/himalaya.c3
-rw-r--r--arch/arm/mach-pxa/hx4700.c5
-rw-r--r--arch/arm/mach-pxa/idp.c3
-rw-r--r--arch/arm/mach-pxa/imote2.c6
-rw-r--r--arch/arm/mach-pxa/include/mach/hardware.h7
-rw-r--r--arch/arm/mach-pxa/include/mach/palmtreo.h67
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa3xx_nand.h63
-rw-r--r--arch/arm/mach-pxa/include/mach/pxafb.h3
-rw-r--r--arch/arm/mach-pxa/include/mach/regs-u2d.h199
-rw-r--r--arch/arm/mach-pxa/include/mach/treo680.h49
-rw-r--r--arch/arm/mach-pxa/littleton.c8
-rw-r--r--arch/arm/mach-pxa/lpd270.c4
-rw-r--r--arch/arm/mach-pxa/lubbock.c4
-rw-r--r--arch/arm/mach-pxa/magician.c4
-rw-r--r--arch/arm/mach-pxa/mainstone.c4
-rw-r--r--arch/arm/mach-pxa/mioa701.c3
-rw-r--r--arch/arm/mach-pxa/mp900.c3
-rw-r--r--arch/arm/mach-pxa/palmld.c4
-rw-r--r--arch/arm/mach-pxa/palmt5.c4
-rw-r--r--arch/arm/mach-pxa/palmtc.c5
-rw-r--r--arch/arm/mach-pxa/palmte2.c4
-rw-r--r--arch/arm/mach-pxa/palmtreo.c (renamed from arch/arm/mach-pxa/treo680.c)365
-rw-r--r--arch/arm/mach-pxa/palmtx.c4
-rw-r--r--arch/arm/mach-pxa/palmz72.c4
-rw-r--r--arch/arm/mach-pxa/pcm027.c4
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c8
-rw-r--r--arch/arm/mach-pxa/poodle.c4
-rw-r--r--arch/arm/mach-pxa/pxa25x.c7
-rw-r--r--arch/arm/mach-pxa/pxa27x.c3
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c47
-rw-r--r--arch/arm/mach-pxa/saar.c105
-rw-r--r--arch/arm/mach-pxa/sharpsl.h4
-rw-r--r--arch/arm/mach-pxa/sharpsl_pm.c112
-rw-r--r--arch/arm/mach-pxa/spitz.c4
-rw-r--r--arch/arm/mach-pxa/spitz_pm.c14
-rw-r--r--arch/arm/mach-pxa/ssp.c73
-rw-r--r--arch/arm/mach-pxa/stargate2.c4
-rw-r--r--arch/arm/mach-pxa/tavorevb.c4
-rw-r--r--arch/arm/mach-pxa/tosa.c5
-rw-r--r--arch/arm/mach-pxa/trizeps4.c4
-rw-r--r--arch/arm/mach-pxa/viper.c15
-rw-r--r--arch/arm/mach-pxa/xcep.c5
-rw-r--r--arch/arm/mach-pxa/zylonite.c6
67 files changed, 1873 insertions, 725 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a6f8eab..d89c6ad 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -2,34 +2,105 @@ if ARCH_PXA
menu "Intel PXA2xx/PXA3xx Implementations"
-if PXA3xx
+comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
-menu "Supported PXA3xx Processor Variants"
+config ARCH_LUBBOCK
+ bool "Intel DBPXA250 Development Platform (aka Lubbock)"
+ select PXA25x
+ select SA1111
+ select PXA_HAVE_BOARD_IRQS
-config CPU_PXA300
- bool "PXA300 (codename Monahans-L)"
+config MACH_MAINSTONE
+ bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+ select PXA27x
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
-config CPU_PXA310
- bool "PXA310 (codename Monahans-LV)"
+config MACH_ZYLONITE
+ bool
+ select PXA3xx
+ select PXA_SSP
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_ZYLONITE300
+ bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
select CPU_PXA300
+ select CPU_PXA310
+ select MACH_ZYLONITE
-config CPU_PXA320
- bool "PXA320 (codename Monahans-P)"
+config MACH_ZYLONITE320
+ bool "PXA3xx Development Platform (aka Zylonite) PXA320"
+ select CPU_PXA320
+ select MACH_ZYLONITE
-config CPU_PXA930
- bool "PXA930 (codename Tavor-P)"
+config MACH_LITTLETON
+ bool "PXA3xx Form Factor Platform (aka Littleton)"
+ select PXA3xx
+ select PXA_SSP
-config CPU_PXA935
- bool "PXA935 (codename Tavor-P65)"
+config MACH_TAVOREVB
+ bool "PXA930 Evaluation Board (aka TavorEVB)"
+ select PXA3xx
select CPU_PXA930
-config CPU_PXA950
- bool "PXA950 (codename Tavor-PV2)"
+config MACH_SAAR
+ bool "PXA930 Handheld Platform (aka SAAR)"
+ select PXA3xx
select CPU_PXA930
-endmenu
+comment "Third Party Dev Platforms (sorted by vendor name)"
-endif
+config ARCH_PXA_IDP
+ bool "Accelent Xscale IDP"
+ select PXA25x
+
+config ARCH_VIPER
+ bool "Arcom/Eurotech VIPER SBC"
+ select PXA25x
+ select ISA
+ select I2C_GPIO
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+ select PXA_HAVE_ISA_IRQS
+
+config MACH_BALLOON3
+ bool "Balloon 3 board"
+ select PXA27x
+ select IWMMXT
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_CSB726
+ bool "Enable Cogent CSB726 System On a Module"
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Cogent
+ CSB726 System On Module.
+
+config CSB726_CSB701
+ bool "Enable support for CSB701 baseboard"
+ depends on MACH_CSB726
+
+config MACH_ARMCORE
+ bool "CompuLab CM-X255/CM-X270 modules"
+ select PXA27x
+ select IWMMXT
+ select PXA25x
+ select PXA_SSP
+
+config MACH_EM_X270
+ bool "CompuLab EM-x270 platform"
+ select PXA27x
+
+config MACH_EXEDA
+ bool "CompuLab eXeda platform"
+ select PXA27x
+
+config MACH_CM_X300
+ bool "CompuLab CM-X300 modules"
+ select PXA3xx
+ select CPU_PXA300
config ARCH_GUMSTIX
bool "Gumstix XScale 255 boards"
@@ -62,185 +133,24 @@ config MACH_STARGATE2
select IWMMXT
select PXA_HAVE_BOARD_IRQS
-config ARCH_LUBBOCK
- bool "Intel DBPXA250 Development Platform"
- select PXA25x
- select SA1111
- select PXA_HAVE_BOARD_IRQS
-
-config MACH_LOGICPD_PXA270
- bool "LogicPD PXA270 Card Engine Development Platform"
- select PXA27x
- select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
-
-config MACH_MAINSTONE
- bool "Intel HCDDBBVA0 Development Platform"
- select PXA27x
- select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
-
-config MACH_MP900C
- bool "Nec Mobilepro 900/c"
- select PXA25x
-
-config MACH_BALLOON3
- bool "Balloon 3 board"
- select PXA27x
- select IWMMXT
- select PXA_HAVE_BOARD_IRQS
-
-config ARCH_PXA_IDP
- bool "Accelent Xscale IDP"
- select PXA25x
-
-config PXA_SHARPSL
- bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
- select SHARP_SCOOP
- select SHARP_PARAM
- help
- Say Y here if you intend to run this kernel on a
- Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
- SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
- SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
- handheld computer.
-
-config SHARPSL_PM
- bool
- select APM_EMULATION
-
-config CORGI_SSP_DEPRECATED
- bool
- select PXA_SSP
- help
- This option will include corgi_ssp.c and corgi_lcd.c
- that corgi_ts.c and other legacy drivers (corgi_bl.c
- and sharpsl_pm.c) may depend on.
-
-config MACH_POODLE
- bool "Enable Sharp SL-5600 (Poodle) Support"
- depends on PXA_SHARPSL
+config MACH_XCEP
+ bool "Iskratel Electronics XCEP"
select PXA25x
- select SHARP_LOCOMO
+ select MTD
+ select MTD_PARTITIONS
+ select MTD_PHYSMAP
+ select MTD_CFI_INTELEXT
+ select MTD_CFI
+ select MTD_CHAR
+ select SMC91X
select PXA_SSP
-
-config MACH_CORGI
- bool "Enable Sharp SL-C700 (Corgi) Support"
- depends on PXA_SHARPSL
- select PXA25x
- select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
- bool "Enable Sharp SL-C750 (Shepherd) Support"
- depends on PXA_SHARPSL
- select PXA25x
- select PXA_SHARP_C7xx
-
-config MACH_HUSKY
- bool "Enable Sharp SL-C760 (Husky) Support"
- depends on PXA_SHARPSL
- select PXA25x
- select PXA_SHARP_C7xx
-
-config MACH_AKITA
- bool "Enable Sharp SL-1000 (Akita) Support"
- depends on PXA_SHARPSL
- select PXA27x
- select PXA_SHARP_Cxx00
- select MACH_SPITZ
- select I2C
- select I2C_PXA
-
-config MACH_SPITZ
- bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
- depends on PXA_SHARPSL
- select PXA27x
- select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
- bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
- depends on PXA_SHARPSL
- select PXA27x
- select PXA_SHARP_Cxx00
-
-config MACH_TOSA
- bool "Enable Sharp SL-6000x (Tosa) Support"
- depends on PXA_SHARPSL
- select PXA25x
- select PXA_HAVE_BOARD_IRQS
-
-config ARCH_VIPER
- bool "Arcom/Eurotech VIPER SBC"
- select PXA25x
- select ISA
- select I2C_GPIO
- select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
- select PXA_HAVE_ISA_IRQS
-
-config ARCH_PXA_ESERIES
- bool "PXA based Toshiba e-series PDAs"
- select PXA25x
- select PXA_HAVE_BOARD_IRQS
-
-config MACH_E330
- bool "Toshiba e330"
- default y
- depends on ARCH_PXA_ESERIES
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e330 family PDA.
-
-config MACH_E350
- bool "Toshiba e350"
- default y
- depends on ARCH_PXA_ESERIES
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e350 family PDA.
-
-config MACH_E740
- bool "Toshiba e740"
- default y
- depends on ARCH_PXA_ESERIES
- select FB_W100
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e740 family PDA.
-
-config MACH_E750
- bool "Toshiba e750"
- default y
- depends on ARCH_PXA_ESERIES
- select FB_W100
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e750 family PDA.
-
-config MACH_E400
- bool "Toshiba e400"
- default y
- depends on ARCH_PXA_ESERIES
help
- Say Y here if you intend to run this kernel on a Toshiba
- e400 family PDA.
-
-config MACH_E800
- bool "Toshiba e800"
- default y
- depends on ARCH_PXA_ESERIES
- select FB_W100
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e800 family PDA.
+ PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+ Tuned for usage in Libera instruments for particle accelerators.
config TRIZEPS_PXA
bool "PXA based Keith und Koep Trizeps DIMM-Modules"
-config MACH_H5000
- bool "HP iPAQ h5000"
- select PXA25x
-
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
depends on TRIZEPS_PXA
@@ -274,13 +184,38 @@ config TRIZEPS_PCMCIA
help
Enable PCMCIA support for Trizeps modules
-config MACH_EM_X270
- bool "CompuLab EM-x270 platform"
+config MACH_LOGICPD_PXA270
+ bool "LogicPD PXA270 Card Engine Development Platform"
select PXA27x
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
-config MACH_EXEDA
- bool "CompuLab eXeda platform"
+config MACH_PCM027
+ bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
+ select IWMMXT
+ select PXA_SSP
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_PCM990_BASEBOARD
+ bool "PHYTEC PCM-990 development board"
+ select HAVE_PWM
+ depends on MACH_PCM027
+
+choice
+ prompt "display on pcm990"
+ depends on MACH_PCM990_BASEBOARD
+
+config PCM990_DISPLAY_SHARP
+ bool "sharp lq084v1dg21 stn display"
+
+config PCM990_DISPLAY_NEC
+ bool "nec nl6448bc20_18d tft display"
+
+config PCM990_DISPLAY_NONE
+ bool "no display"
+
+endchoice
config MACH_COLIBRI
bool "Toradex Colibri PXA270"
@@ -290,45 +225,15 @@ config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
select PXA3xx
select CPU_PXA300
+ select CPU_PXA310
+ select HAVE_PWM
config MACH_COLIBRI320
bool "Toradex Colibri PXA320"
select PXA3xx
select CPU_PXA320
-config MACH_ZYLONITE
- bool "PXA3xx Development Platform (aka Zylonite)"
- select PXA3xx
- select PXA_SSP
- select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
-
-config MACH_LITTLETON
- bool "PXA3xx Form Factor Platform (aka Littleton)"
- select PXA3xx
- select PXA_SSP
-
-config MACH_TAVOREVB
- bool "PXA930 Evaluation Board (aka TavorEVB)"
- select PXA3xx
- select CPU_PXA930
-
-config MACH_SAAR
- bool "PXA930 Handheld Platform (aka SAAR)"
- select PXA3xx
- select CPU_PXA930
-
-config MACH_ARMCORE
- bool "CompuLab CM-X255/CM-X270 modules"
- select PXA27x
- select IWMMXT
- select PXA25x
- select PXA_SSP
-
-config MACH_CM_X300
- bool "CompuLab CM-X300 modules"
- select PXA3xx
- select CPU_PXA300
+comment "End-user Products (sorted by vendor name)"
config MACH_H4700
bool "HP iPAQ hx4700"
@@ -338,6 +243,15 @@ config MACH_H4700
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
+config MACH_H5000
+ bool "HP iPAQ h5000"
+ select PXA25x
+
+config MACH_HIMALAYA
+ bool "HTC Himalaya Support"
+ select CPU_PXA26x
+ select FB_W100
+
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select PXA27x
@@ -346,11 +260,6 @@ config MACH_MAGICIAN
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
-config MACH_HIMALAYA
- bool "HTC Himalaya Support"
- select CPU_PXA26x
- select FB_W100
-
config MACH_MIOA701
bool "Mitac Mio A701 Support"
select PXA27x
@@ -362,13 +271,47 @@ config MACH_MIOA701
MIO A701. Currently there is only basic support
for this PDA.
-config MACH_PCM027
- bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
+config PXA_EZX
+ bool "Motorola EZX Platform"
select PXA27x
select IWMMXT
- select PXA_SSP
+ select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
+config MACH_EZX_A780
+ bool "Motorola EZX A780"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_E680
+ bool "Motorola EZX E680"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_A1200
+ bool "Motorola EZX A1200"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_A910
+ bool "Motorola EZX A910"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_E6
+ bool "Motorola EZX E6"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_E2
+ bool "Motorola EZX E2"
+ default y
+ depends on PXA_EZX
+
+config MACH_MP900C
+ bool "Nec Mobilepro 900/c"
+ select PXA25x
+
config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
select HAVE_PWM
@@ -421,109 +364,172 @@ config MACH_PALMZ72
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
-config MACH_TREO680
- bool "Palm Treo 680"
+config MACH_PALMLD
+ bool "Palm LifeDrive"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
- Say Y here if you intend to run this kernel on Palm Treo 680
+ Say Y here if you intend to run this kernel on a Palm LifeDrive
+ handheld computer.
+
+config PALM_TREO
+ bool
+ depends on ARCH_PXA_PALM
+
+config MACH_CENTRO
+ bool "Palm Centro 685 (GSM)"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ select PALM_TREO
+ help
+ Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
smartphone.
-config MACH_PALMLD
- bool "Palm LifeDrive"
+config MACH_TREO680
+ bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
+ select PALM_TREO
help
- Say Y here if you intend to run this kernel on a Palm LifeDrive
+ Say Y here if you intend to run this kernel on Palm Treo 680
+ smartphone.
+
+config PXA_SHARPSL
+ bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
+ select SHARP_SCOOP
+ select SHARP_PARAM
+ help
+ Say Y here if you intend to run this kernel on a
+ Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
+ SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
+ SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
-config MACH_PCM990_BASEBOARD
- bool "PHYTEC PCM-990 development board"
- select HAVE_PWM
- depends on MACH_PCM027
+config SHARPSL_PM
+ bool
+ select APM_EMULATION
-choice
- prompt "display on pcm990"
- depends on MACH_PCM990_BASEBOARD
+config CORGI_SSP_DEPRECATED
+ bool
+ select PXA_SSP
+ help
+ This option will include corgi_ssp.c and corgi_lcd.c
+ that corgi_ts.c and other legacy drivers (corgi_bl.c
+ and sharpsl_pm.c) may depend on.
-config PCM990_DISPLAY_SHARP
- bool "sharp lq084v1dg21 stn display"
+config MACH_POODLE
+ bool "Enable Sharp SL-5600 (Poodle) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select SHARP_LOCOMO
+ select PXA_SSP
-config PCM990_DISPLAY_NEC
- bool "nec nl6448bc20_18d tft display"
+config MACH_CORGI
+ bool "Enable Sharp SL-C700 (Corgi) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select PXA_SHARP_C7xx
-config PCM990_DISPLAY_NONE
- bool "no display"
+config MACH_SHEPHERD
+ bool "Enable Sharp SL-C750 (Shepherd) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select PXA_SHARP_C7xx
-endchoice
+config MACH_HUSKY
+ bool "Enable Sharp SL-C760 (Husky) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select PXA_SHARP_C7xx
-config MACH_CSB726
- bool "Enable Cogent CSB726 System On a Module"
+config MACH_AKITA
+ bool "Enable Sharp SL-1000 (Akita) Support"
+ depends on PXA_SHARPSL
select PXA27x
- select IWMMXT
- help
- Say Y here if you intend to run this kernel on a Cogent
- CSB726 System On Module.
+ select PXA_SHARP_Cxx00
+ select MACH_SPITZ
+ select I2C
+ select I2C_PXA
-config CSB726_CSB701
- bool "Enable supprot for CSB701 baseboard"
- depends on MACH_CSB726
+config MACH_SPITZ
+ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+ depends on PXA_SHARPSL
+ select PXA27x
+ select PXA_SHARP_Cxx00
-config PXA_EZX
- bool "Motorola EZX Platform"
+config MACH_BORZOI
+ bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+ depends on PXA_SHARPSL
select PXA27x
- select IWMMXT
- select HAVE_PWM
+ select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+ bool "Enable Sharp SL-6000x (Tosa) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
select PXA_HAVE_BOARD_IRQS
-config MACH_EZX_A780
- bool "Motorola EZX A780"
- default y
- depends on PXA_EZX
+config ARCH_PXA_ESERIES
+ bool "PXA based Toshiba e-series PDAs"
+ select PXA25x
+ select PXA_HAVE_BOARD_IRQS
-config MACH_EZX_E680
- bool "Motorola EZX E680"
+config MACH_E330
+ bool "Toshiba e330"
default y
- depends on PXA_EZX
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e330 family PDA.
-config MACH_EZX_A1200
- bool "Motorola EZX A1200"
+config MACH_E350
+ bool "Toshiba e350"
default y
- depends on PXA_EZX
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e350 family PDA.
-config MACH_EZX_A910
- bool "Motorola EZX A910"
+config MACH_E740
+ bool "Toshiba e740"
default y
- depends on PXA_EZX
+ depends on ARCH_PXA_ESERIES
+ select FB_W100
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e740 family PDA.
-config MACH_EZX_E6
- bool "Motorola EZX E6"
+config MACH_E750
+ bool "Toshiba e750"
default y
- depends on PXA_EZX
+ depends on ARCH_PXA_ESERIES
+ select FB_W100
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e750 family PDA.
-config MACH_EZX_E2
- bool "Motorola EZX E2"
+config MACH_E400
+ bool "Toshiba e400"
default y
- depends on PXA_EZX
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e400 family PDA.
-config MACH_XCEP
- bool "Iskratel Electronics XCEP"
- select PXA25x
- select MTD
- select MTD_PARTITIONS
- select MTD_PHYSMAP
- select MTD_CFI_INTELEXT
- select MTD_CFI
- select MTD_CHAR
- select SMC91X
- select PXA_SSP
+config MACH_E800
+ bool "Toshiba e800"
+ default y
+ depends on ARCH_PXA_ESERIES
+ select FB_W100
help
- PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
- Tuned for usage in Libera instruments for particle accelerators.
+ Say Y here if you intend to run this kernel on a Toshiba
+ e800 family PDA.
endmenu
@@ -551,6 +557,42 @@ config PXA3xx
help
Select code specific to PXA3xx variants
+config CPU_PXA300
+ bool
+ select PXA3xx
+ help
+ PXA300 (codename Monahans-L)
+
+config CPU_PXA310
+ bool
+ select CPU_PXA300
+ help
+ PXA310 (codename Monahans-LV)
+
+config CPU_PXA320
+ bool
+ select PXA3xx
+ help
+ PXA320 (codename Monahans-P)
+
+config CPU_PXA930
+ bool
+ select PXA3xx
+ help
+ PXA930 (codename Tavor-P)
+
+config CPU_PXA935
+ bool
+ select CPU_PXA930
+ help
+ PXA935 (codename Tavor-P65)
+
+config CPU_PXA950
+ bool
+ select CPU_PXA930
+ help
+ PXA950 (codename Tavor-PV2)
+
config PXA_SHARP_C7xx
bool
select PXA_SSP
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index f10e152..b5d29e6 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -24,33 +24,63 @@ obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
-# Specific board support
-obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
-obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
-obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
+# NOTE: keep the order of boards in accordance to their order in Kconfig
+
+# Intel/Marvell Dev Platforms
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
-obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
-obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
-obj-$(CONFIG_MACH_MP900C) += mp900.o
+obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o
+obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o
+obj-$(CONFIG_MACH_LITTLETON) += littleton.o
+obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
+obj-$(CONFIG_MACH_SAAR) += saar.o
+
+# 3rd Party Dev Platforms
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
+obj-$(CONFIG_ARCH_VIPER) += viper.o
+obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
+obj-$(CONFIG_MACH_CSB726) += csb726.o
+obj-$(CONFIG_CSB726_CSB701) += csb701.o
+obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
+ifeq ($(CONFIG_PCI),y)
+obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
+endif
+obj-$(CONFIG_MACH_EM_X270) += em-x270.o
+obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
+obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
+obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
+obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
+obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
+obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
+obj-$(CONFIG_MACH_XCEP) += xcep.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
+obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
+obj-$(CONFIG_MACH_PCM027) += pcm027.o
+obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
+
+# End-user Products
+obj-$(CONFIG_MACH_H4700) += hx4700.o
obj-$(CONFIG_MACH_H5000) += h5000.o
+obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
+obj-$(CONFIG_MACH_MAGICIAN) += magician.o
+obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
+obj-$(CONFIG_PXA_EZX) += ezx.o
+obj-$(CONFIG_MACH_MP900C) += mp900.o
+obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
+obj-$(CONFIG_MACH_PALMTC) += palmtc.o
+obj-$(CONFIG_MACH_PALMT5) += palmt5.o
+obj-$(CONFIG_MACH_PALMTX) += palmtx.o
+obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
+obj-$(CONFIG_MACH_PALMLD) += palmld.o
+obj-$(CONFIG_PALM_TREO) += palmtreo.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o
obj-$(CONFIG_MACH_POODLE) += poodle.o
-obj-$(CONFIG_MACH_PCM027) += pcm027.o
-obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
-obj-$(CONFIG_MACH_EM_X270) += em-x270.o
-obj-$(CONFIG_MACH_H4700) += hx4700.o
-obj-$(CONFIG_MACH_MAGICIAN) += magician.o
-obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
-obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
obj-$(CONFIG_MACH_E330) += e330.o
obj-$(CONFIG_MACH_E350) += e350.o
@@ -58,34 +88,6 @@ obj-$(CONFIG_MACH_E740) += e740.o
obj-$(CONFIG_MACH_E750) += e750.o
obj-$(CONFIG_MACH_E400) += e400.o
obj-$(CONFIG_MACH_E800) += e800.o
-obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
-obj-$(CONFIG_MACH_PALMTC) += palmtc.o
-obj-$(CONFIG_MACH_PALMT5) += palmt5.o
-obj-$(CONFIG_MACH_PALMTX) += palmtx.o
-obj-$(CONFIG_MACH_PALMLD) += palmld.o
-obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
-obj-$(CONFIG_MACH_TREO680) += treo680.o
-obj-$(CONFIG_ARCH_VIPER) += viper.o
-
-ifeq ($(CONFIG_MACH_ZYLONITE),y)
- obj-y += zylonite.o
- obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o
- obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
-endif
-obj-$(CONFIG_MACH_LITTLETON) += littleton.o
-obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
-obj-$(CONFIG_MACH_SAAR) += saar.o
-
-obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
-obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
-obj-$(CONFIG_PXA_EZX) += ezx.o
-
-obj-$(CONFIG_MACH_XCEP) += xcep.o
-
-obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
-obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
-obj-$(CONFIG_MACH_CSB726) += csb726.o
-obj-$(CONFIG_CSB726_CSB701) += csb701.o
# Support for blinky lights
led-y := leds.o
@@ -95,8 +97,4 @@ led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
obj-$(CONFIG_LEDS) += $(led-y)
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
-endif
-
obj-$(CONFIG_TOSA_BT) += tosa-bt.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index f23138b..b8cd07c 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -306,6 +306,10 @@ static void __init balloon3_init(void)
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
pxa_set_i2c_info(NULL);
if (balloon3_has(BALLOON3_FEATURE_AUDIO))
pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index b50ef39..bff6e78 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -453,6 +453,10 @@ static inline void cmx2xx_init_ac97(void) {}
static void __init cmx2xx_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
cmx2xx_pm_init();
if (cpu_is_pxa25x())
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 102916f..d37cfa1 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -3,9 +3,10 @@
*
* Support for the CompuLab CM-X300 modules
*
- * Copyright (C) 2008 CompuLab Ltd.
+ * Copyright (C) 2008,2009 CompuLab Ltd.
*
* Mike Rapoport <mike@compulab.co.il>
+ * Igor Grinberg <grinberg@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -16,30 +17,41 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/init.h>
+#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/dm9000.h>
#include <linux/leds.h>
#include <linux/rtc-v3020.h>
+#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
+#include <linux/mfd/da903x.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/tdo24m.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
#include <mach/pxa300.h>
+#include <mach/pxa27x-udc.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <plat/i2c.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
+#include <mach/audio.h>
#include <asm/mach/map.h>
#include "generic.h"
+#include "devices.h"
#define CM_X300_ETH_PHYS 0x08000010
@@ -53,7 +65,7 @@
#define GPIO97_RTC_RD (97)
#define GPIO98_RTC_IO (98)
-static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
+static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
/* LCD */
GPIO54_LCD_LDD_0,
GPIO55_LCD_LDD_1,
@@ -137,7 +149,6 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
GPIO36_UART1_DTR,
/* GPIOs */
- GPIO79_GPIO, /* LED */
GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */
GPIO85_GPIO, /* MMC WP */
GPIO99_GPIO, /* Ethernet IRQ */
@@ -151,6 +162,50 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
/* Standard I2C */
GPIO21_I2C_SCL,
GPIO22_I2C_SDA,
+
+ /* PWM Backlight */
+ GPIO19_PWM2_OUT,
+};
+
+static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
+ /* GPIOs */
+ GPIO79_GPIO, /* LED */
+ GPIO77_GPIO, /* WiFi reset */
+ GPIO78_GPIO, /* BT reset */
+};
+
+static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
+ /* GPIOs */
+ GPIO76_GPIO, /* LED */
+ GPIO71_GPIO, /* WiFi reset */
+ GPIO70_GPIO, /* BT reset */
+};
+
+static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
+ /* USB PORT 2 */
+ ULPI_STP,
+ ULPI_NXT,
+ ULPI_DIR,
+ GPIO30_ULPI_DATA_OUT_0,
+ GPIO31_ULPI_DATA_OUT_1,
+ GPIO32_ULPI_DATA_OUT_2,
+ GPIO33_ULPI_DATA_OUT_3,
+ GPIO34_ULPI_DATA_OUT_4,
+ GPIO35_ULPI_DATA_OUT_5,
+ GPIO36_ULPI_DATA_OUT_6,
+ GPIO37_ULPI_DATA_OUT_7,
+ GPIO38_ULPI_CLK,
+ /* external PHY reset pin */
+ GPIO127_GPIO,
+
+ /* USB PORT 3 */
+ GPIO77_USB_P3_1,
+ GPIO78_USB_P3_2,
+ GPIO79_USB_P3_3,
+ GPIO80_USB_P3_4,
+ GPIO81_USB_P3_5,
+ GPIO82_USB_P3_6,
+ GPIO0_2_USBH_PEN,
};
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
@@ -195,17 +250,18 @@ static void __init cm_x300_init_dm9000(void)
static inline void cm_x300_init_dm9000(void) {}
#endif
+/* LCD */
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info cm_x300_lcd_modes[] = {
[0] = {
- .pixclock = 38000,
+ .pixclock = 38250,
.bpp = 16,
.xres = 480,
.yres = 640,
.hsync_len = 8,
.vsync_len = 2,
.left_margin = 8,
- .upper_margin = 0,
+ .upper_margin = 2,
.right_margin = 24,
.lower_margin = 4,
.cmap_greyscale = 0,
@@ -227,7 +283,7 @@ static struct pxafb_mode_info cm_x300_lcd_modes[] = {
static struct pxafb_mach_info cm_x300_lcd = {
.modes = cm_x300_lcd_modes,
- .num_modes = 2,
+ .num_modes = ARRAY_SIZE(cm_x300_lcd_modes),
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
@@ -239,6 +295,87 @@ static void __init cm_x300_init_lcd(void)
static inline void cm_x300_init_lcd(void) {}
#endif
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct platform_pwm_backlight_data cm_x300_backlight_data = {
+ .pwm_id = 2,
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .pwm_period_ns = 10000,
+};
+
+static struct platform_device cm_x300_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &cm_x300_backlight_data,
+ },
+};
+
+static void cm_x300_init_bl(void)
+{
+ platform_device_register(&cm_x300_backlight_device);
+}
+#else
+static inline void cm_x300_init_bl(void) {}
+#endif
+
+#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
+#define GPIO_LCD_BASE (144)
+#define GPIO_LCD_DIN (GPIO_LCD_BASE + 8) /* aux_gpio3_0 */
+#define GPIO_LCD_DOUT (GPIO_LCD_BASE + 9) /* aux_gpio3_1 */
+#define GPIO_LCD_SCL (GPIO_LCD_BASE + 10) /* aux_gpio3_2 */
+#define GPIO_LCD_CS (GPIO_LCD_BASE + 11) /* aux_gpio3_3 */
+#define LCD_SPI_BUS_NUM (1)
+
+static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
+ .sck = GPIO_LCD_SCL,
+ .mosi = GPIO_LCD_DIN,
+ .miso = GPIO_LCD_DOUT,
+ .num_chipselect = 1,
+};
+
+static struct platform_device cm_x300_spi_gpio = {
+ .name = "spi_gpio",
+ .id = LCD_SPI_BUS_NUM,
+ .dev = {
+ .platform_data = &cm_x300_spi_gpio_pdata,
+ },
+};
+
+static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
+ .model = TDO35S,
+};
+
+static struct spi_board_info cm_x300_spi_devices[] __initdata = {
+ {
+ .modalias = "tdo24m",
+ .max_speed_hz = 1000000,
+ .bus_num = LCD_SPI_BUS_NUM,
+ .chip_select = 0,
+ .controller_data = (void *) GPIO_LCD_CS,
+ .platform_data = &cm_x300_tdo24m_pdata,
+ },
+};
+
+static void __init cm_x300_init_spi(void)
+{
+ spi_register_board_info(cm_x300_spi_devices,
+ ARRAY_SIZE(cm_x300_spi_devices));
+ platform_device_register(&cm_x300_spi_gpio);
+}
+#else
+static inline void cm_x300_init_spi(void) {}
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
+static void __init cm_x300_init_ac97(void)
+{
+ pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cm_x300_init_ac97(void) {}
+#endif
+
#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
static struct mtd_partition cm_x300_nand_partitions[] = {
[0] = {
@@ -333,9 +470,19 @@ static inline void cm_x300_init_mmc(void) {}
#endif
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int cm_x300_ohci_init(struct device *dev)
+{
+ if (cpu_is_pxa300())
+ UP2OCR = UP2OCR_HXS
+ | UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
+
+ return 0;
+}
+
static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
- .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW,
+ .init = cm_x300_ohci_init,
};
static void __init cm_x300_init_ohci(void)
@@ -351,7 +498,6 @@ static struct gpio_led cm_x300_leds[] = {
[0] = {
.name = "cm-x300:green",
.default_trigger = "heartbeat",
- .gpio = 79,
.active_low = 1,
},
};
@@ -371,6 +517,11 @@ static struct platform_device cm_x300_led_device = {
static void __init cm_x300_init_leds(void)
{
+ if (system_rev < 130)
+ cm_x300_leds[0].gpio = 79;
+ else
+ cm_x300_leds[0].gpio = 76;
+
platform_device_register(&cm_x300_led_device);
}
#else
@@ -433,11 +584,94 @@ static void __init cm_x300_init_rtc(void)
static inline void cm_x300_init_rtc(void) {}
#endif
-static void __init cm_x300_init(void)
+/* DA9030 */
+struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
+ {
+ .name = "da903x-backlight",
+ .id = DA9030_ID_WLED,
+ }
+};
+
+static struct da903x_platform_data cm_x300_da9030_info = {
+ .num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
+ .subdevs = cm_x300_da9030_subdevs,
+};
+
+static struct i2c_board_info cm_x300_pmic_info = {
+ I2C_BOARD_INFO("da9030", 0x49),
+ .irq = IRQ_GPIO(0),
+ .platform_data = &cm_x300_da9030_info,
+};
+
+static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
+ .use_pio = 1,
+};
+
+static void __init cm_x300_init_da9030(void)
+{
+ pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
+ i2c_register_board_info(1, &cm_x300_pmic_info, 1);
+}
+
+static void __init cm_x300_init_wi2wi(void)
+{
+ int bt_reset, wlan_en;
+ int err;
+
+ if (system_rev < 130) {
+ wlan_en = 77;
+ bt_reset = 78;
+ } else {
+ wlan_en = 71;
+ bt_reset = 70;
+ }
+
+ /* Libertas and CSR reset */
+ err = gpio_request(wlan_en, "wlan en");
+ if (err) {
+ pr_err("CM-X300: failed to request wlan en gpio: %d\n", err);
+ } else {
+ gpio_direction_output(wlan_en, 1);
+ gpio_free(wlan_en);
+ }
+
+ err = gpio_request(bt_reset, "bt reset");
+ if (err) {
+ pr_err("CM-X300: failed to request bt reset gpio: %d\n", err);
+ } else {
+ gpio_direction_output(bt_reset, 1);
+ udelay(10);
+ gpio_set_value(bt_reset, 0);
+ udelay(10);
+ gpio_set_value(bt_reset, 1);
+ gpio_free(bt_reset);
+ }
+}
+
+/* MFP */
+static void __init cm_x300_init_mfp(void)
{
/* board-processor specific GPIO initialization */
- pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
+
+ if (system_rev < 130)
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
+ else
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
+
+ if (cpu_is_pxa310())
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
+}
+
+static void __init cm_x300_init(void)
+{
+ cm_x300_init_mfp();
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ cm_x300_init_da9030();
cm_x300_init_dm9000();
cm_x300_init_lcd();
cm_x300_init_ohci();
@@ -445,7 +679,11 @@ static void __init cm_x300_init(void)
cm_x300_init_nand();
cm_x300_init_leds();
cm_x300_init_i2c();
+ cm_x300_init_spi();
cm_x300_init_rtc();
+ cm_x300_init_ac97();
+ cm_x300_init_wi2wi();
+ cm_x300_init_bl();
}
static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 01bcfaa..061c453 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -130,6 +130,9 @@ static struct platform_device *colibri_pxa270_devices[] __initdata = {
static void __init colibri_pxa270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
}
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 37c239c..45c23fd 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -170,6 +170,10 @@ static inline void colibri_pxa310_init_ac97(void) {}
void __init colibri_pxa300_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
colibri_pxa300_init_eth();
colibri_pxa300_init_ohci();
colibri_pxa3xx_init_nand();
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index ec0e14b..ae835fa 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -199,6 +199,10 @@ static void __init colibri_pxa320_init_uart(void)
void __init colibri_pxa320_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
colibri_pxa320_init_eth();
colibri_pxa320_init_ohci();
colibri_pxa3xx_init_nand();
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index efebaf4..e6c0a22 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -25,7 +25,7 @@
#include <mach/colibri.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index b536b5a..74446cf 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -671,6 +671,10 @@ static void __init corgi_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
corgi_init_spi();
pxa_set_udc_info(&udc_info);
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index a093282..d4a0733 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -214,8 +214,8 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
.fatal_acin_volt = SHARPSL_FATAL_ACIN_VOLT,
.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
.bat_levels = 40,
- .bat_levels_noac = spitz_battery_levels_noac,
- .bat_levels_acin = spitz_battery_levels_acin,
+ .bat_levels_noac = sharpsl_battery_levels_noac,
+ .bat_levels_acin = sharpsl_battery_levels_acin,
.status_high_acin = 188,
.status_low_acin = 178,
.status_high_noac = 185,
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 965480e..88575b8 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -268,6 +268,9 @@ static void __init csb726_init(void)
/* MSC2 = 0x06697ff4; *//* none/SM501 */
MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
pxa_set_i2c_info(NULL);
pxa27x_set_i2c_power_info(NULL);
pxa_set_mci_info(&csb726_mci);
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 46fabe1c..3395463 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,17 +4,18 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <mach/hardware.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/irda.h>
-#include <plat/i2c.h>
#include <mach/ohci.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxa2xx_spi.h>
#include <mach/camera.h>
#include <mach/audio.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
#include "devices.h"
#include "generic.h"
@@ -167,13 +168,18 @@ static struct resource pxa_resource_ffuart[] = {
}
};
-struct platform_device pxa_device_ffuart= {
+struct platform_device pxa_device_ffuart = {
.name = "pxa2xx-uart",
.id = 0,
.resource = pxa_resource_ffuart,
.num_resources = ARRAY_SIZE(pxa_resource_ffuart),
};
+void __init pxa_set_ffuart_info(void *info)
+{
+ pxa_register_device(&pxa_device_ffuart, info);
+}
+
static struct resource pxa_resource_btuart[] = {
{
.start = 0x40200000,
@@ -193,6 +199,11 @@ struct platform_device pxa_device_btuart = {
.num_resources = ARRAY_SIZE(pxa_resource_btuart),
};
+void __init pxa_set_btuart_info(void *info)
+{
+ pxa_register_device(&pxa_device_btuart, info);
+}
+
static struct resource pxa_resource_stuart[] = {
{
.start = 0x40700000,
@@ -212,6 +223,11 @@ struct platform_device pxa_device_stuart = {
.num_resources = ARRAY_SIZE(pxa_resource_stuart),
};
+void __init pxa_set_stuart_info(void *info)
+{
+ pxa_register_device(&pxa_device_stuart, info);
+}
+
static struct resource pxa_resource_hwuart[] = {
{
.start = 0x41600000,
@@ -231,6 +247,14 @@ struct platform_device pxa_device_hwuart = {
.num_resources = ARRAY_SIZE(pxa_resource_hwuart),
};
+void __init pxa_set_hwuart_info(void *info)
+{
+ if (cpu_is_pxa255())
+ pxa_register_device(&pxa_device_hwuart, info);
+ else
+ pr_info("UART: Ignoring attempt to register HWUART on non-PXA255 hardware");
+}
+
static struct resource pxai2c_resources[] = {
{
.start = 0x40301680,
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
index 74d3f89..8fde338 100644
--- a/arch/arm/mach-pxa/e330.c
+++ b/arch/arm/mach-pxa/e330.c
@@ -55,6 +55,9 @@ static struct platform_device *devices[] __initdata = {
static void __init e330_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
eseries_register_clks();
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
index 0800362..f50f055 100644
--- a/arch/arm/mach-pxa/e350.c
+++ b/arch/arm/mach-pxa/e350.c
@@ -56,6 +56,9 @@ static struct platform_device *devices[] __initdata = {
static void __init e350_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
eseries_register_clks();
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
index ed9c0c3..55b950f 100644
--- a/arch/arm/mach-pxa/e400.c
+++ b/arch/arm/mach-pxa/e400.c
@@ -130,6 +130,9 @@ static struct platform_device *devices[] __initdata = {
static void __init e400_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
/* Fixme - e400 may have a switched clock */
eseries_register_clks();
eseries_get_tmio_gpios();
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 49acdfa..94b23a9 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -192,6 +192,9 @@ static struct platform_device *devices[] __initdata = {
static void __init e740_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
eseries_register_clks();
clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
"UDCCLK", &pxa25x_device_udc.dev),
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 4052ece..5eccbce 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -194,6 +194,9 @@ static struct platform_device *devices[] __initdata = {
static void __init e750_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index 9866c7b..aad129b 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -195,6 +195,9 @@ static struct platform_device *devices[] __initdata = {
static void __init e800_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index aec7f42..1c0de80 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -967,7 +967,7 @@ static inline void em_x270_init_gpio_keys(void) {}
#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
static struct regulator *em_x270_camera_ldo;
-static int em_x270_sensor_init(struct device *dev)
+static int em_x270_sensor_init(void)
{
int ret;
@@ -996,7 +996,6 @@ static int em_x270_sensor_init(struct device *dev)
}
struct pxacamera_platform_data em_x270_camera_platform_data = {
- .init = em_x270_sensor_init,
.flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
.mclk_10khz = 2600,
@@ -1049,8 +1048,10 @@ static struct platform_device em_x270_camera = {
static void __init em_x270_init_camera(void)
{
- pxa_set_camera_info(&em_x270_camera_platform_data);
- platform_device_register(&em_x270_camera);
+ if (em_x270_sensor_init() == 0) {
+ pxa_set_camera_info(&em_x270_camera_platform_data);
+ platform_device_register(&em_x270_camera);
+ }
}
#else
static inline void em_x270_init_camera(void) {}
@@ -1286,6 +1287,10 @@ static void __init em_x270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
#ifdef CONFIG_PM
pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
#endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 588b265..626c82b 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -17,7 +17,11 @@
#include <linux/delay.h>
#include <linux/pwm_backlight.h>
#include <linux/input.h>
+#include <linux/gpio.h>
#include <linux/gpio_keys.h>
+#include <linux/leds-lp3944.h>
+
+#include <media/soc_camera.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -29,6 +33,7 @@
#include <plat/i2c.h>
#include <mach/hardware.h>
#include <mach/pxa27x_keypad.h>
+#include <mach/camera.h>
#include "devices.h"
#include "generic.h"
@@ -38,6 +43,9 @@
#define GPIO15_A910_FLIP_LID 15
#define GPIO12_E680_LOCK_SWITCH 12
#define GPIO15_E6_LOCK_SWITCH 15
+#define GPIO50_nCAM_EN 50
+#define GPIO19_GEN1_CAM_RST 19
+#define GPIO28_GEN2_CAM_RST 28
static struct platform_pwm_backlight_data ezx_backlight_data = {
.pwm_id = 0,
@@ -191,8 +199,8 @@ static unsigned long gen1_pin_config[] __initdata = {
GPIO94_CIF_DD_5,
GPIO17_CIF_DD_6,
GPIO108_CIF_DD_7,
- GPIO50_GPIO, /* CAM_EN */
- GPIO19_GPIO, /* CAM_RST */
+ GPIO50_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_EN */
+ GPIO19_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_RST */
/* EMU */
GPIO120_GPIO, /* EMU_MUX1 */
@@ -248,8 +256,8 @@ static unsigned long gen2_pin_config[] __initdata = {
GPIO48_CIF_DD_5,
GPIO93_CIF_DD_6,
GPIO12_CIF_DD_7,
- GPIO50_GPIO, /* CAM_EN */
- GPIO28_GPIO, /* CAM_RST */
+ GPIO50_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_EN */
+ GPIO28_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_RST */
GPIO17_GPIO, /* CAM_FLASH */
};
#endif
@@ -683,6 +691,81 @@ static struct platform_device a780_gpio_keys = {
},
};
+/* camera */
+static int a780_camera_init(void)
+{
+ int err;
+
+ /*
+ * GPIO50_nCAM_EN is active low
+ * GPIO19_GEN1_CAM_RST is active on rising edge
+ */
+ err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+ if (err) {
+ pr_err("%s: Failed to request nCAM_EN\n", __func__);
+ goto fail;
+ }
+
+ err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
+ if (err) {
+ pr_err("%s: Failed to request CAM_RST\n", __func__);
+ goto fail_gpio_cam_rst;
+ }
+
+ gpio_direction_output(GPIO50_nCAM_EN, 1);
+ gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
+
+ return 0;
+
+fail_gpio_cam_rst:
+ gpio_free(GPIO50_nCAM_EN);
+fail:
+ return err;
+}
+
+static int a780_camera_power(struct device *dev, int on)
+{
+ gpio_set_value(GPIO50_nCAM_EN, !on);
+ return 0;
+}
+
+static int a780_camera_reset(struct device *dev)
+{
+ gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
+ msleep(10);
+ gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
+
+ return 0;
+}
+
+struct pxacamera_platform_data a780_pxacamera_platform_data = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a780_camera_i2c_board_info = {
+ I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a780_iclink = {
+ .bus_id = 0,
+ .flags = SOCAM_SENSOR_INVERT_PCLK,
+ .i2c_adapter_id = 0,
+ .board_info = &a780_camera_i2c_board_info,
+ .module_name = "mt9m111",
+ .power = a780_camera_power,
+ .reset = a780_camera_reset,
+};
+
+static struct platform_device a780_camera = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &a780_iclink,
+ },
+};
+
static struct platform_device *a780_devices[] __initdata = {
&a780_gpio_keys,
};
@@ -693,12 +776,21 @@ static void __init a780_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
pxa_set_i2c_info(NULL);
set_pxa_fb_info(&ezx_fb_info_1);
pxa_set_keypad_info(&a780_keypad_platform_data);
+ if (a780_camera_init() == 0) {
+ pxa_set_camera_info(&a780_pxacamera_platform_data);
+ platform_device_register(&a780_camera);
+ }
+
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(a780_devices));
}
@@ -754,6 +846,10 @@ static void __init e680_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
@@ -816,6 +912,10 @@ static void __init a1200_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
@@ -864,6 +964,131 @@ static struct platform_device a910_gpio_keys = {
},
};
+/* camera */
+static int a910_camera_init(void)
+{
+ int err;
+
+ /*
+ * GPIO50_nCAM_EN is active low
+ * GPIO28_GEN2_CAM_RST is active on rising edge
+ */
+ err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+ if (err) {
+ pr_err("%s: Failed to request nCAM_EN\n", __func__);
+ goto fail;
+ }
+
+ err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
+ if (err) {
+ pr_err("%s: Failed to request CAM_RST\n", __func__);
+ goto fail_gpio_cam_rst;
+ }
+
+ gpio_direction_output(GPIO50_nCAM_EN, 1);
+ gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
+
+ return 0;
+
+fail_gpio_cam_rst:
+ gpio_free(GPIO50_nCAM_EN);
+fail:
+ return err;
+}
+
+static int a910_camera_power(struct device *dev, int on)
+{
+ gpio_set_value(GPIO50_nCAM_EN, !on);
+ return 0;
+}
+
+static int a910_camera_reset(struct device *dev)
+{
+ gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
+ msleep(10);
+ gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
+
+ return 0;
+}
+
+struct pxacamera_platform_data a910_pxacamera_platform_data = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a910_camera_i2c_board_info = {
+ I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a910_iclink = {
+ .bus_id = 0,
+ .i2c_adapter_id = 0,
+ .board_info = &a910_camera_i2c_board_info,
+ .module_name = "mt9m111",
+ .power = a910_camera_power,
+ .reset = a910_camera_reset,
+};
+
+static struct platform_device a910_camera = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &a910_iclink,
+ },
+};
+
+/* leds-lp3944 */
+static struct lp3944_platform_data a910_lp3944_leds = {
+ .leds_size = LP3944_LEDS_MAX,
+ .leds = {
+ [0] = {
+ .name = "a910:red:",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED,
+ },
+ [1] = {
+ .name = "a910:green:",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED,
+ },
+ [2] {
+ .name = "a910:blue:",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED,
+ },
+ /* Leds 3 and 4 are used as display power switches */
+ [3] = {
+ .name = "a910::cli_display",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED_INVERTED
+ },
+ [4] = {
+ .name = "a910::main_display",
+ .status = LP3944_LED_STATUS_ON,
+ .type = LP3944_LED_TYPE_LED_INVERTED
+ },
+ [5] = { .type = LP3944_LED_TYPE_NONE },
+ [6] = {
+ .name = "a910::torch",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED,
+ },
+ [7] = {
+ .name = "a910::flash",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED_INVERTED,
+ },
+ },
+};
+
+static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("lp3944", 0x60),
+ .platform_data = &a910_lp3944_leds,
+ },
+};
+
static struct platform_device *a910_devices[] __initdata = {
&a910_gpio_keys,
};
@@ -874,12 +1099,22 @@ static void __init a910_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
set_pxa_fb_info(&ezx_fb_info_2);
pxa_set_keypad_info(&a910_keypad_platform_data);
+ if (a910_camera_init() == 0) {
+ pxa_set_camera_info(&a910_pxacamera_platform_data);
+ platform_device_register(&a910_camera);
+ }
+
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(a910_devices));
}
@@ -935,6 +1170,10 @@ static void __init e6_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
@@ -971,6 +1210,10 @@ static void __init e2_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 485fede..890fb90 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -67,3 +67,8 @@ extern struct sysdev_class pxa_irq_sysclass;
extern struct sysdev_class pxa_gpio_sysclass;
extern struct sysdev_class pxa2xx_mfp_sysclass;
extern struct sysdev_class pxa3xx_mfp_sysclass;
+
+void __init pxa_set_ffuart_info(void *info);
+void __init pxa_set_btuart_info(void *info);
+void __init pxa_set_stuart_info(void *info);
+void __init pxa_set_hwuart_info(void *info);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 1708c01..96c3451 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -211,6 +211,11 @@ static void __init gumstix_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ pxa_set_hwuart_info(NULL);
+
gumstix_bluetooth_init();
gumstix_udc_init();
gumstix_mmc_init();
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index f3d220c..c1cab08 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -193,6 +193,9 @@ static void __init h5000_init(void)
fix_msc();
pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
pxa_set_udc_info(&h5000_udc_mach_info);
platform_add_devices(ARRAY_AND_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index cea99fe..f9a2e4b 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -150,6 +150,9 @@ static void __init himalaya_lcd_init(void)
static void __init himalaya_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
himalaya_lcd_init();
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 83bd3c6..848c861 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -820,6 +820,7 @@ static struct platform_device *devices[] __initdata = {
&gpio_keys,
&backlight,
&w3220,
+ &hx4700_lcd,
&egpio,
&bq24022,
&gpio_vbus,
@@ -849,6 +850,10 @@ static void __init hx4700_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_ficp_info(&ficp_info);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index b6486ef..5c9e11d 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -179,6 +179,9 @@ static void __init idp_init(void)
printk("idp_init()\n");
pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
platform_device_register(&smc91x_device);
//platform_device_register(&mst_audio_device);
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 2a4945d..5b0862d 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -554,8 +554,12 @@ static struct i2c_pxa_platform_data i2c_pdata = {
static void __init imote2_init(void)
{
-
pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
/* SPI chip select directions - all other directions should
* be handled by drivers.*/
gpio_direction_output(37, 0);
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index aa3d9f7..50f1297 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -105,6 +105,7 @@
*
* PXA935 A0 0x56056931 0x1E653013
* PXA935 B0 0x56056936 0x6E653013
+ * PXA935 B1 0x56056938 0x8E653013
*/
#ifdef CONFIG_PXA25x
#define __cpu_is_pxa210(id) \
@@ -283,7 +284,7 @@
_id == 0x3; \
})
-#define __cpu_is_pxa9xx(id) \
+#define __cpu_is_pxa93x(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
_id == 0x683 || _id == 0x693; \
@@ -299,9 +300,9 @@
__cpu_is_pxa3xx(read_cpuid_id()); \
})
-#define cpu_is_pxa9xx() \
+#define cpu_is_pxa93x() \
({ \
- __cpu_is_pxa9xx(read_cpuid_id()); \
+ __cpu_is_pxa93x(read_cpuid_id()); \
})
/*
* return current memory and LCD clock frequency in units of 10kHz
diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/include/mach/palmtreo.h
new file mode 100644
index 0000000..2d3f14e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmtreo.h
@@ -0,0 +1,67 @@
+/*
+ * GPIOs and interrupts for Palm Treo smartphones
+ *
+ * currently supported:
+ * Palm Treo 680 (GSM)
+ * Palm Centro 685 (GSM)
+ *
+ * Author: Tomas Cech <sleep_walker@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * find more info at www.hackndev.com
+ *
+ */
+
+#ifndef _INCLUDE_TREO_H_
+#define _INCLUDE_TREO_H_
+
+/* GPIOs */
+#define GPIO_NR_TREO_POWER_DETECT 0
+#define GPIO_NR_TREO_AMP_EN 27
+#define GPIO_NR_TREO_GREEN_LED 20
+#define GPIO_NR_TREO_RED_LED 79
+#define GPIO_NR_TREO_SD_DETECT_N 113
+#define GPIO_NR_TREO_EP_DETECT_N 116
+#define GPIO_NR_TREO_USB_DETECT 1
+#define GPIO_NR_TREO_USB_PULLUP 114
+#define GPIO_NR_TREO_GSM_POWER 40
+#define GPIO_NR_TREO_GSM_RESET 87
+#define GPIO_NR_TREO_GSM_WAKE 57
+#define GPIO_NR_TREO_GSM_HOST_WAKE 14
+#define GPIO_NR_TREO_GSM_TRIGGER 10
+#define GPIO_NR_TREO_IR_EN 115
+#define GPIO_NR_TREO_IR_TXD 47
+#define GPIO_NR_TREO_BL_POWER 38
+#define GPIO_NR_TREO_LCD_POWER 25
+
+/* Treo680 specific GPIOs */
+#ifdef CONFIG_MACH_TREO680
+#define GPIO_NR_TREO680_SD_READONLY 33
+#define GPIO_NR_TREO680_SD_POWER 42
+#define GPIO_NR_TREO680_VIBRATE_EN 44
+#define GPIO_NR_TREO680_KEYB_BL 24
+#define GPIO_NR_TREO680_BT_EN 43
+#endif /* CONFIG_MACH_TREO680 */
+
+/* Centro685 specific GPIOs */
+#define GPIO_NR_CENTRO_SD_POWER 21
+#define GPIO_NR_CENTRO_VIBRATE_EN 22
+#define GPIO_NR_CENTRO_KEYB_BL 33
+#define GPIO_NR_CENTRO_BT_EN 80
+
+/* Various addresses */
+#define TREO_PHYS_RAM_START 0xa0000000
+#define TREO_PHYS_IO_START 0x40000000
+#define TREO_STR_BASE 0xa2000000
+
+/* BACKLIGHT */
+#define TREO_MAX_INTENSITY 254
+#define TREO_DEFAULT_INTENSITY 160
+#define TREO_LIMIT_MASK 0x7F
+#define TREO_PRESCALER 63
+#define TREO_PERIOD_NS 3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
deleted file mode 100644
index 3478eae..0000000
--- a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
+++ /dev/null
@@ -1,63 +0,0 @@
-#ifndef __ASM_ARCH_PXA3XX_NAND_H
-#define __ASM_ARCH_PXA3XX_NAND_H
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-struct pxa3xx_nand_timing {
- unsigned int tCH; /* Enable signal hold time */
- unsigned int tCS; /* Enable signal setup time */
- unsigned int tWH; /* ND_nWE high duration */
- unsigned int tWP; /* ND_nWE pulse time */
- unsigned int tRH; /* ND_nRE high duration */
- unsigned int tRP; /* ND_nRE pulse width */
- unsigned int tR; /* ND_nWE high to ND_nRE low for read */
- unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */
- unsigned int tAR; /* ND_ALE low to ND_nRE low delay */
-};
-
-struct pxa3xx_nand_cmdset {
- uint16_t read1;
- uint16_t read2;
- uint16_t program;
- uint16_t read_status;
- uint16_t read_id;
- uint16_t erase;
- uint16_t reset;
- uint16_t lock;
- uint16_t unlock;
- uint16_t lock_status;
-};
-
-struct pxa3xx_nand_flash {
- const struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
- const struct pxa3xx_nand_cmdset *cmdset;
-
- uint32_t page_per_block;/* Pages per block (PG_PER_BLK) */
- uint32_t page_size; /* Page size in bytes (PAGE_SZ) */
- uint32_t flash_width; /* Width of Flash memory (DWIDTH_M) */
- uint32_t dfc_width; /* Width of flash controller(DWIDTH_C) */
- uint32_t num_blocks; /* Number of physical blocks in Flash */
- uint32_t chip_id;
-};
-
-struct pxa3xx_nand_platform_data {
-
- /* the data flash bus is shared between the Static Memory
- * Controller and the Data Flash Controller, the arbiter
- * controls the ownership of the bus
- */
- int enable_arbiter;
-
- /* allow platform code to keep OBM/bootloader defined NFC config */
- int keep_config;
-
- const struct mtd_partition *parts;
- unsigned int nr_parts;
-
- const struct pxa3xx_nand_flash * flash;
- size_t num_flash;
-};
-
-extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
-#endif /* __ASM_ARCH_PXA3XX_NAND_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index f73061c..160ec83 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -76,7 +76,8 @@ struct pxafb_mode_info {
u_char bpp;
u_int cmap_greyscale:1,
depth:8,
- unused:23;
+ transparency:1,
+ unused:22;
/* Parallel Mode Timing */
u_char hsync_len;
diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/include/mach/regs-u2d.h
new file mode 100644
index 0000000..44b0b20
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-u2d.h
@@ -0,0 +1,199 @@
+#ifndef __ASM_ARCH_PXA3xx_U2D_H
+#define __ASM_ARCH_PXA3xx_U2D_H
+
+#include <mach/bitfield.h>
+
+/*
+ * USB2 device controller registers and bits definitions
+ */
+#define U2DCR (0x0000) /* U2D Control Register */
+#define U2DCR_NDC (1 << 31) /* NAK During Config */
+#define U2DCR_HSTC (0x7 << 28) /* High Speed Timeout Calibration */
+#define U2DCR_SPEOREN (1 << 27) /* Short Packet EOR INTR generation Enable */
+#define U2DCR_FSTC (0x7 << 24) /* Full Speed Timeout Calibration */
+#define U2DCR_UCLKOVR (1 << 22) /* UTM Clock Override */
+#define U2DCR_ABP (1 << 21) /* Application Bus Power */
+#define U2DCR_ADD (1 << 20) /* Application Device Disconnect */
+#define U2DCR_CC (1 << 19) /* Configuration Change */
+#define U2DCR_HS (1 << 18) /* High Speed USB Detection */
+#define U2DCR_SMAC (1 << 17) /* Switch Endpoint Memory to Active Configuration */
+#define U2DCR_DWRE (1 << 16) /* Device Remote Wake-up Feature */
+#define U2DCR_ACN (0xf << 12) /* Active U2D Configuration Number */
+#define U2DCR_AIN (0xf << 8) /* Active U2D Interface Number */
+#define U2DCR_AAISN (0xf << 4) /* Active U2D Alternate Interface Setting Number */
+#define U2DCR_EMCE (1 << 3) /* Endpoint Memory Configuration Error */
+#define U2DCR_UDR (1 << 2) /* U2D Resume */
+#define U2DCR_UDA (1 << 1) /* U2D Active */
+#define U2DCR_UDE (1 << 0) /* U2D Enable */
+
+#define U2DICR (0x0004) /* U2D Interrupt Control Register */
+#define U2DISR (0x000C) /* U2D Interrupt Status Register */
+#define U2DINT_CC (1 << 31) /* Interrupt - Configuration Change */
+#define U2DINT_SOF (1 << 30) /* Interrupt - SOF */
+#define U2DINT_USOF (1 << 29) /* Interrupt - micro SOF */
+#define U2DINT_RU (1 << 28) /* Interrupt - Resume */
+#define U2DINT_SU (1 << 27) /* Interrupt - Suspend */
+#define U2DINT_RS (1 << 26) /* Interrupt - Reset */
+#define U2DINT_DPE (1 << 25) /* Interrupt - Data Packet Error */
+#define U2DINT_FIFOERR (0x4) /* Interrupt - endpoint FIFO error */
+#define U2DINT_PACKETCMP (0x2) /* Interrupt - endpoint packet complete */
+#define U2DINT_SPACKETCMP (0x1) /* Interrupt - endpoint short packet complete */
+
+#define U2DFNR (0x0014) /* U2D Frame Number Register */
+
+#define U2DINT(n, intr) (((intr) & 0x07) << (((n) & 0x07) * 3))
+#define U2DICR2 (0x0008) /* U2D Interrupt Control Register 2 */
+#define U2DISR2 (0x0010) /* U2D Interrupt Status Register 2 */
+
+#define U2DOTGCR (0x0020) /* U2D OTG Control Register */
+#define U2DOTGCR_OTGEN (1 << 31) /* On-The-Go Enable */
+#define U2DOTGCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation Protocal Port Support */
+#define U2DOTGCR_AHNP (1 << 29) /* A-device Host Negotiation Protocal Support */
+#define U2DOTGCR_BHNP (1 << 28) /* B-device Host Negotiation Protocal Enable */
+
+#ifdef CONFIG_CPU_PXA930
+#define U2DOTGCR_LPA (1 << 15) /* ULPI low power mode active */
+#define U2DOTGCR_IESI (1 << 13) /* OTG interrupt Enable */
+#define U2DOTGCR_ISSI (1 << 12) /* OTG interrupt status */
+#endif
+
+#define U2DOTGCR_CKAF (1 << 5) /* Carkit Mode Alternate Function Select */
+#define U2DOTGCR_UTMID (1 << 4) /* UTMI Interface Disable */
+#define U2DOTGCR_ULAF (1 << 3) /* ULPI Mode Alternate Function Select */
+#define U2DOTGCR_SMAF (1 << 2) /* Serial Mode Alternate Function Select */
+#define U2DOTGCR_RTSM (1 << 1) /* Return to Synchronous Mode (ULPI Mode) */
+#define U2DOTGCR_ULE (1 << 0) /* ULPI Wrapper Enable */
+
+#define U2DOTGICR (0x0024) /* U2D OTG Interrupt Control Register */
+#define U2DOTGISR (0x0028) /* U2D OTG Interrupt Status Register */
+
+#define U2DOTGINT_SF (1 << 17) /* OTG Set Feature Command Received */
+#define U2DOTGINT_SI (1 << 16) /* OTG Interrupt */
+#define U2DOTGINT_RLS1 (1 << 14) /* RXCMD Linestate[1] Change Interrupt Rise */
+#define U2DOTGINT_RLS0 (1 << 13) /* RXCMD Linestate[0] Change Interrupt Rise */
+#define U2DOTGINT_RID (1 << 12) /* RXCMD OTG ID Change Interrupt Rise */
+#define U2DOTGINT_RSE (1 << 11) /* RXCMD OTG Session End Interrupt Rise */
+#define U2DOTGINT_RSV (1 << 10) /* RXCMD OTG Session Valid Interrupt Rise */
+#define U2DOTGINT_RVV (1 << 9) /* RXCMD OTG Vbus Valid Interrupt Rise */
+#define U2DOTGINT_RCK (1 << 8) /* RXCMD Carkit Interrupt Rise */
+#define U2DOTGINT_FLS1 (1 << 6) /* RXCMD Linestate[1] Change Interrupt Fall */
+#define U2DOTGINT_FLS0 (1 << 5) /* RXCMD Linestate[0] Change Interrupt Fall */
+#define U2DOTGINT_FID (1 << 4) /* RXCMD OTG ID Change Interrupt Fall */
+#define U2DOTGINT_FSE (1 << 3) /* RXCMD OTG Session End Interrupt Fall */
+#define U2DOTGINT_FSV (1 << 2) /* RXCMD OTG Session Valid Interrupt Fall */
+#define U2DOTGINT_FVV (1 << 1) /* RXCMD OTG Vbus Valid Interrupt Fall */
+#define U2DOTGINT_FCK (1 << 0) /* RXCMD Carkit Interrupt Fall */
+
+#define U2DOTGUSR (0x002C) /* U2D OTG ULPI Status Register */
+#define U2DOTGUSR_LPA (1 << 31) /* ULPI Low Power Mode Active */
+#define U2DOTGUSR_S6A (1 << 30) /* ULPI Serial Mode (6-pin) Active */
+#define U2DOTGUSR_S3A (1 << 29) /* ULPI Serial Mode (3-pin) Active */
+#define U2DOTGUSR_CKA (1 << 28) /* ULPI Car Kit Mode Active */
+#define U2DOTGUSR_LS1 (1 << 6) /* RXCMD Linestate 1 Status */
+#define U2DOTGUSR_LS0 (1 << 5) /* RXCMD Linestate 0 Status */
+#define U2DOTGUSR_ID (1 << 4) /* OTG IDGnd Status */
+#define U2DOTGUSR_SE (1 << 3) /* OTG Session End Status */
+#define U2DOTGUSR_SV (1 << 2) /* OTG Session Valid Status */
+#define U2DOTGUSR_VV (1 << 1) /* OTG Vbus Valid Status */
+#define U2DOTGUSR_CK (1 << 0) /* Carkit Interrupt Status */
+
+#define U2DOTGUCR (0x0030) /* U2D OTG ULPI Control Register */
+#define U2DOTGUCR_RUN (1 << 25) /* RUN */
+#define U2DOTGUCR_RNW (1 << 24) /* Read or Write operation */
+#define U2DOTGUCR_ADDR (0x3f << 16) /* Address of the ULPI PHY register */
+#define U2DOTGUCR_WDATA (0xff << 8) /* The data for a WRITE command */
+#define U2DOTGUCR_RDATA (0xff << 0) /* The data for a READ command */
+
+#define U2DP3CR (0x0034) /* U2D Port 3 Control Register */
+#define U2DP3CR_P2SS (0x3 << 8) /* Host Port 2 Serial Mode Select */
+#define U2DP3CR_P3SS (0x7 << 4) /* Host Port 3 Serial Mode Select */
+#define U2DP3CR_VPVMBEN (0x1 << 2) /* Host Port 3 Vp/Vm Block Enable */
+#define U2DP3CR_CFG (0x3 << 0) /* Host Port 3 Configuration */
+
+#define U2DCSR0 (0x0100) /* U2D Control/Status Register - Endpoint 0 */
+#define U2DCSR0_IPA (1 << 8) /* IN Packet Adjusted */
+#define U2DCSR0_SA (1 << 7) /* SETUP Active */
+#define U2DCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
+#define U2DCSR0_FST (1 << 5) /* Force Stall */
+#define U2DCSR0_SST (1 << 4) /* Send Stall */
+#define U2DCSR0_DME (1 << 3) /* DMA Enable */
+#define U2DCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
+#define U2DCSR0_IPR (1 << 1) /* IN Packet Ready */
+#define U2DCSR0_OPC (1 << 0) /* OUT Packet Complete */
+
+#define U2DCSR(x) (0x0100 + ((x) << 2)) /* U2D Control/Status Register - Endpoint x */
+#define U2DCSR_BF (1 << 10) /* Buffer Full, for OUT eps */
+#define U2DCSR_BE (1 << 10) /* Buffer Empty, for IN eps */
+#define U2DCSR_DPE (1 << 9) /* Data Packet Error, for ISO eps only */
+#define U2DCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
+#define U2DCSR_SP (1 << 7) /* Short Packet Control/Status, for OUT eps only, readonly */
+#define U2DCSR_BNE (1 << 6) /* Buffer Not Empty, for OUT eps */
+#define U2DCSR_BNF (1 << 6) /* Buffer Not Full, for IN eps */
+#define U2DCSR_FST (1 << 5) /* Force STALL, write 1 set */
+#define U2DCSR_SST (1 << 4) /* Sent STALL, write 1 clear */
+#define U2DCSR_DME (1 << 3) /* DMA Enable */
+#define U2DCSR_TRN (1 << 2) /* Tx/Rx NAK, write 1 clear */
+#define U2DCSR_PC (1 << 1) /* Packet Complete, write 1 clear */
+#define U2DCSR_FS (1 << 0) /* FIFO needs Service */
+
+#define U2DBCR0 (0x0200) /* U2D Byte Count Register - Endpoint 0 */
+#define U2DBCR(x) (0x0200 + ((x) << 2)) /* U2D Byte Count Register - Endpoint x */
+
+#define U2DDR0 (0x0300) /* U2D Data Register - Endpoint 0 */
+
+#define U2DEPCR(x) (0x0400 + ((x) << 2)) /* U2D Configuration Register - Endpoint x */
+#define U2DEPCR_EE (1 << 0) /* Endpoint Enable */
+#define U2DEPCR_BS_MASK (0x3FE) /* Buffer Size, BS*8=FIFO size, max 8184B = 8KB */
+
+#define U2DSCA (0x0500) /* U2D Setup Command Address */
+#define U2DSCA_VALUE (0x0120)
+
+#define U2DEN0 (0x0504) /* U2D Endpoint Information Register - Endpoint 0 */
+#define U2DEN(x) (0x0504 + ((x) << 2)) /* U2D Endpoint Information Register - Endpoint x */
+
+/* U2DMA registers */
+#define U2DMACSR0 (0x1000) /* U2DMA Control/Status Register - Channel 0 */
+#define U2DMACSR(x) (0x1000 + ((x) << 2)) /* U2DMA Control/Status Register - Channel x */
+#define U2DMACSR_RUN (1 << 31) /* Run Bit (read / write) */
+#define U2DMACSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
+#define U2DMACSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
+#define U2DMACSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
+#define U2DMACSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
+#define U2DMACSR_RASIRQEN (1 << 23) /* Request After Cnannel Stopped Interrupt Enable */
+#define U2DMACSR_MASKRUN (1 << 22) /* Mask Run */
+#define U2DMACSR_SCEMC (3 << 18) /* System Bus Split Completion Error Message Class */
+#define U2DMACSR_SCEMI (0x1f << 13) /* System Bus Split Completion Error Message Index */
+#define U2DMACSR_BUSERRTYPE (7 << 10) /* PX Bus Error Type */
+#define U2DMACSR_EORINTR (1 << 9) /* End Of Receive */
+#define U2DMACSR_REQPEND (1 << 8) /* Request Pending */
+#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */
+#define U2DMACSR_ENDINTR (1 << 2) /* End Interrupt (read / write 1 clear) */
+#define U2DMACSR_STARTINTR (1 << 1) /* Start Interrupt (read / write 1 clear) */
+#define U2DMACSR_BUSERRINTR (1 << 0) /* Bus Error Interrupt (read / write 1 clear) */
+
+#define U2DMACR (0x1080) /* U2DMA Control Register */
+#define U2DMAINT (0x10F0) /* U2DMA Interrupt Register */
+
+#define U2DMABR0 (0x1100) /* U2DMA Branch Register - Channel 0 */
+#define U2DMABR(x) (0x1100 + (x) << 2) /* U2DMA Branch Register - Channel x */
+
+#define U2DMADADR0 (0x1200) /* U2DMA Descriptor Address Register - Channel 0 */
+#define U2DMADADR(x) (0x1200 + (x) * 0x10) /* U2DMA Descriptor Address Register - Channel x */
+
+#define U2DMADADR_STOP (1U << 0)
+
+#define U2DMASADR0 (0x1204) /* U2DMA Source Address Register - Channel 0 */
+#define U2DMASADR(x) (0x1204 + (x) * 0x10) /* U2DMA Source Address Register - Channel x */
+#define U2DMATADR0 (0x1208) /* U2DMA Target Address Register - Channel 0 */
+#define U2DMATADR(x) (0x1208 + (x) * 0x10) /* U2DMA Target Address Register - Channel x */
+
+#define U2DMACMDR0 (0x120C) /* U2DMA Command Address Register - Channel 0 */
+#define U2DMACMDR(x) (0x120C + (x) * 0x10) /* U2DMA Command Address Register - Channel x */
+
+#define U2DMACMDR_XFRDIS (1 << 31) /* Transfer Direction */
+#define U2DMACMDR_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
+#define U2DMACMDR_ENDIRQEN (1 << 21) /* End Interrupt Enable */
+#define U2DMACMDR_PACKCOMP (1 << 13) /* Packet Complete */
+#define U2DMACMDR_LEN (0x07ff) /* length mask (max = 2K - 1) */
+
+#endif /* __ASM_ARCH_PXA3xx_U2D_H */
diff --git a/arch/arm/mach-pxa/include/mach/treo680.h b/arch/arm/mach-pxa/include/mach/treo680.h
deleted file mode 100644
index af443b2..0000000
--- a/arch/arm/mach-pxa/include/mach/treo680.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * GPIOs and interrupts for Palm Treo 680 smartphone
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_TREO680_H_
-#define _INCLUDE_TREO680_H_
-
-/* GPIOs */
-#define GPIO_NR_TREO680_POWER_DETECT 0
-#define GPIO_NR_TREO680_AMP_EN 27
-#define GPIO_NR_TREO680_KEYB_BL 24
-#define GPIO_NR_TREO680_VIBRATE_EN 44
-#define GPIO_NR_TREO680_GREEN_LED 20
-#define GPIO_NR_TREO680_RED_LED 79
-#define GPIO_NR_TREO680_SD_DETECT_N 113
-#define GPIO_NR_TREO680_SD_READONLY 33
-#define GPIO_NR_TREO680_EP_DETECT_N 116
-#define GPIO_NR_TREO680_SD_POWER 42
-#define GPIO_NR_TREO680_USB_DETECT 1
-#define GPIO_NR_TREO680_USB_PULLUP 114
-#define GPIO_NR_TREO680_GSM_POWER 40
-#define GPIO_NR_TREO680_GSM_RESET 87
-#define GPIO_NR_TREO680_GSM_WAKE 57
-#define GPIO_NR_TREO680_GSM_HOST_WAKE 14
-#define GPIO_NR_TREO680_GSM_TRIGGER 10
-#define GPIO_NR_TREO680_BT_EN 43
-#define GPIO_NR_TREO680_IR_EN 115
-#define GPIO_NR_TREO680_IR_TXD 47
-#define GPIO_NR_TREO680_BL_POWER 38
-#define GPIO_NR_TREO680_LCD_POWER 25
-
-/* Various addresses */
-#define TREO680_PHYS_RAM_START 0xa0000000
-#define TREO680_PHYS_IO_START 0x40000000
-#define TREO680_STR_BASE 0xa2000000
-
-/* BACKLIGHT */
-#define TREO680_MAX_INTENSITY 254
-#define TREO680_DEFAULT_INTENSITY 160
-#define TREO680_LIMIT_MASK 0x7F
-#define TREO680_PRESCALER 63
-#define TREO680_PERIOD_NS 3500
-
-#endif
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 1384895..f28c171 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -44,10 +44,10 @@
#include <mach/ssp.h>
#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>
-#include <plat/i2c.h>
#include <mach/pxa27x_keypad.h>
-#include <mach/pxa3xx_nand.h>
#include <mach/littleton.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
#include "generic.h"
@@ -413,6 +413,10 @@ static void __init littleton_init(void)
/* initialize MFP configurations */
pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
/*
* Note: we depend bootloader set the correct
* value to MSC register for SMC91x.
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index d64395f..1373c22 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -455,6 +455,10 @@ static void __init lpd270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
lpd270_flash_data[1].width = 4;
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index c6a94d3..98ee7e5 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -518,6 +518,10 @@ static void __init lubbock_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
pxa_set_udc_info(&udc_info);
set_pxa_fb_info(&sharp_lm8v31);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5360c07..8a38d60 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -742,6 +742,10 @@ static void __init magician_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
platform_add_devices(ARRAY_AND_SIZE(devices));
err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN");
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a4eeae3..851ee0f 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -576,6 +576,10 @@ static void __init mainstone_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
mst_flash_data[1].width = 4;
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 3cab452..2466a44 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -798,6 +798,9 @@ static void __init mioa701_machine_init(void)
UP2OCR = UP2OCR_HXOE;
pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
bootstrap_init();
set_pxa_fb_info(&mioa701_pxafb_info);
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index a65713c..6d45039 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -84,6 +84,9 @@ static struct platform_device *devices[] __initdata = {
static void __init mp900c_init(void)
{
printk(KERN_INFO "MobilePro 900/C machine init\n");
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 1ad029d..5914021 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -530,6 +530,10 @@ static void __init palmld_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
palmld_pm_init();
set_pxa_fb_info(&palmld_lcd_screen);
pxa_set_mci_info(&palmld_mci_platform_data);
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 2dd7ce2..7f89ca2 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -419,6 +419,10 @@ static void __init palmt5_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
palmt5_pm_init();
set_pxa_fb_info(&palmt5_lcd_screen);
pxa_set_mci_info(&palmt5_mci_platform_data);
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 0b92291..3084175 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -416,6 +416,11 @@ static void __init palmtc_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ pxa_set_hwuart_info(NULL);
+
set_pxa_fb_info(&palmtc_lcd_screen);
pxa_set_mci_info(&palmtc_mci_platform_data);
pxa_set_udc_info(&palmtc_udc_info);
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 277c406..265d62b 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -373,6 +373,10 @@ static void __init palmte2_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
set_pxa_fb_info(&palmte2_lcd_screen);
pxa_set_mci_info(&palmte2_mci_platform_data);
palmte2_udc_init();
diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/palmtreo.c
index fe08507..606eb7e 100644
--- a/arch/arm/mach-pxa/treo680.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -1,5 +1,9 @@
/*
- * Hardware definitions for Palm Treo 680
+ * Hardware definitions for Palm Treo smartphones
+ *
+ * currently supported:
+ * Palm Treo 680 (GSM)
+ * Palm Centro 685 (GSM)
*
* Author: Tomas Cech <sleep_walker@suse.cz>
*
@@ -31,7 +35,7 @@
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/audio.h>
-#include <mach/treo680.h>
+#include <mach/palmtreo.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/irda.h>
@@ -50,7 +54,7 @@
/******************************************************************************
* Pin configuration
******************************************************************************/
-static unsigned long treo680_pin_config[] __initdata = {
+static unsigned long treo_pin_config[] __initdata = {
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
@@ -58,7 +62,6 @@ static unsigned long treo680_pin_config[] __initdata = {
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
- GPIO33_GPIO, /* SD read only */
GPIO113_GPIO, /* SD detect */
/* AC97 */
@@ -80,12 +83,10 @@ static unsigned long treo680_pin_config[] __initdata = {
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* usb detect */
/* MATRIX KEYPAD */
- GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1,
GPIO102_KP_MKIN_2,
GPIO97_KP_MKIN_3,
GPIO98_KP_MKIN_4,
- GPIO99_KP_MKIN_5,
GPIO91_KP_MKIN_6,
GPIO13_KP_MKIN_7,
GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
@@ -150,19 +151,57 @@ static unsigned long treo680_pin_config[] __initdata = {
GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth host wake up */
};
+#ifdef CONFIG_MACH_TREO680
+static unsigned long treo680_pin_config[] __initdata = {
+ GPIO33_GPIO, /* SD read only */
+
+ /* MATRIX KEYPAD - different wake up source */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO99_KP_MKIN_5,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static unsigned long centro685_pin_config[] __initdata = {
+ /* Bluetooth attached to BT UART*/
+ MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW), /* power: LOW = off */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* MATRIX KEYPAD - different wake up source */
+ GPIO100_KP_MKIN_0,
+ GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
static struct pxamci_platform_data treo680_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_TREO680_SD_DETECT_N,
+ .gpio_card_detect = GPIO_NR_TREO_SD_DETECT_N,
.gpio_card_ro = GPIO_NR_TREO680_SD_READONLY,
.gpio_power = GPIO_NR_TREO680_SD_POWER,
};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static struct pxamci_platform_data centro_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_TREO_SD_DETECT_N,
+ .gpio_card_ro = -1,
+ .gpio_power = GPIO_NR_CENTRO_SD_POWER,
+ .gpio_power_invert = 1,
+};
+#endif /* CONFIG_MACH_CENTRO */
/******************************************************************************
* GPIO keyboard
******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
static unsigned int treo680_matrix_keys[] = {
KEY(0, 0, KEY_F8), /* Red/Off/Power */
KEY(0, 1, KEY_LEFT),
@@ -232,92 +271,167 @@ static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
.debounce_interval = 30,
};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static unsigned int centro_matrix_keys[] = {
+ KEY(0, 0, KEY_F9), /* Home */
+ KEY(0, 1, KEY_LEFT),
+ KEY(0, 2, KEY_LEFTCTRL), /* Alternate */
+ KEY(0, 3, KEY_L),
+ KEY(0, 4, KEY_A),
+ KEY(0, 5, KEY_Q),
+ KEY(0, 6, KEY_P),
+
+ KEY(1, 0, KEY_RIGHTCTRL), /* Menu */
+ KEY(1, 1, KEY_RIGHT),
+ KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */
+ KEY(1, 3, KEY_Z),
+ KEY(1, 4, KEY_S),
+ KEY(1, 5, KEY_W),
+
+ KEY(2, 0, KEY_F1), /* Phone */
+ KEY(2, 1, KEY_UP),
+ KEY(2, 2, KEY_0),
+ KEY(2, 3, KEY_X),
+ KEY(2, 4, KEY_D),
+ KEY(2, 5, KEY_E),
+
+ KEY(3, 0, KEY_F10), /* Calendar */
+ KEY(3, 1, KEY_DOWN),
+ KEY(3, 2, KEY_SPACE),
+ KEY(3, 3, KEY_C),
+ KEY(3, 4, KEY_F),
+ KEY(3, 5, KEY_R),
+
+ KEY(4, 0, KEY_F12), /* Mail */
+ KEY(4, 1, KEY_KPENTER),
+ KEY(4, 2, KEY_RIGHTALT), /* Alt */
+ KEY(4, 3, KEY_V),
+ KEY(4, 4, KEY_G),
+ KEY(4, 5, KEY_T),
+
+ KEY(5, 0, KEY_F8), /* Red/Off/Power */
+ KEY(5, 1, KEY_PAGEUP), /* Side up */
+ KEY(5, 2, KEY_DOT),
+ KEY(5, 3, KEY_B),
+ KEY(5, 4, KEY_H),
+ KEY(5, 5, KEY_Y),
+
+ KEY(6, 0, KEY_TAB), /* Side Activate */
+ KEY(6, 1, KEY_PAGEDOWN), /* Side down */
+ KEY(6, 2, KEY_ENTER),
+ KEY(6, 3, KEY_N),
+ KEY(6, 4, KEY_J),
+ KEY(6, 5, KEY_U),
+
+ KEY(7, 0, KEY_F6), /* Green/Call */
+ KEY(7, 1, KEY_O),
+ KEY(7, 2, KEY_BACKSPACE),
+ KEY(7, 3, KEY_M),
+ KEY(7, 4, KEY_K),
+ KEY(7, 5, KEY_I),
+};
+
+static struct pxa27x_keypad_platform_data centro_keypad_platform_data = {
+ .matrix_key_rows = 8,
+ .matrix_key_cols = 7,
+ .matrix_key_map = centro_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys),
+ .direct_key_map = { KEY_CONNECT },
+ .direct_key_num = 1,
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_CENTRO */
/******************************************************************************
* aSoC audio
******************************************************************************/
-static pxa2xx_audio_ops_t treo680_ac97_pdata = {
+static pxa2xx_audio_ops_t treo_ac97_pdata = {
.reset_gpio = 95,
};
/******************************************************************************
* Backlight
******************************************************************************/
-static int treo680_backlight_init(struct device *dev)
+static int treo_backlight_init(struct device *dev)
{
int ret;
- ret = gpio_request(GPIO_NR_TREO680_BL_POWER, "BL POWER");
+ ret = gpio_request(GPIO_NR_TREO_BL_POWER, "BL POWER");
if (ret)
goto err;
- ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
+ ret = gpio_direction_output(GPIO_NR_TREO_BL_POWER, 0);
if (ret)
goto err2;
return 0;
err2:
- gpio_free(GPIO_NR_TREO680_BL_POWER);
+ gpio_free(GPIO_NR_TREO_BL_POWER);
err:
return ret;
}
-static int treo680_backlight_notify(int brightness)
+static int treo_backlight_notify(int brightness)
{
- gpio_set_value(GPIO_NR_TREO680_BL_POWER, brightness);
- return TREO680_MAX_INTENSITY - brightness;
+ gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness);
+ return TREO_MAX_INTENSITY - brightness;
};
-static void treo680_backlight_exit(struct device *dev)
+static void treo_backlight_exit(struct device *dev)
{
- gpio_free(GPIO_NR_TREO680_BL_POWER);
+ gpio_free(GPIO_NR_TREO_BL_POWER);
}
-static struct platform_pwm_backlight_data treo680_backlight_data = {
+static struct platform_pwm_backlight_data treo_backlight_data = {
.pwm_id = 0,
- .max_brightness = TREO680_MAX_INTENSITY,
- .dft_brightness = TREO680_DEFAULT_INTENSITY,
- .pwm_period_ns = TREO680_PERIOD_NS,
- .init = treo680_backlight_init,
- .notify = treo680_backlight_notify,
- .exit = treo680_backlight_exit,
+ .max_brightness = TREO_MAX_INTENSITY,
+ .dft_brightness = TREO_DEFAULT_INTENSITY,
+ .pwm_period_ns = TREO_PERIOD_NS,
+ .init = treo_backlight_init,
+ .notify = treo_backlight_notify,
+ .exit = treo_backlight_exit,
};
-static struct platform_device treo680_backlight = {
+static struct platform_device treo_backlight = {
.name = "pwm-backlight",
.dev = {
.parent = &pxa27x_device_pwm0.dev,
- .platform_data = &treo680_backlight_data,
+ .platform_data = &treo_backlight_data,
},
};
/******************************************************************************
* IrDA
******************************************************************************/
-static struct pxaficp_platform_data treo680_ficp_info = {
- .gpio_pwdown = GPIO_NR_TREO680_IR_EN,
+static struct pxaficp_platform_data treo_ficp_info = {
+ .gpio_pwdown = GPIO_NR_TREO_IR_EN,
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************
* UDC
******************************************************************************/
-static struct pxa2xx_udc_mach_info treo680_udc_info __initdata = {
- .gpio_vbus = GPIO_NR_TREO680_USB_DETECT,
+static struct pxa2xx_udc_mach_info treo_udc_info __initdata = {
+ .gpio_vbus = GPIO_NR_TREO_USB_DETECT,
.gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_TREO680_USB_PULLUP,
+ .gpio_pullup = GPIO_NR_TREO_USB_PULLUP,
};
/******************************************************************************
* USB host
******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
static struct pxaohci_platform_data treo680_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | ENABLE_PORT3,
.power_budget = 0,
};
+#endif /* CONFIG_MACH_TREO680 */
/******************************************************************************
* Power supply
@@ -326,41 +440,41 @@ static int power_supply_init(struct device *dev)
{
int ret;
- ret = gpio_request(GPIO_NR_TREO680_POWER_DETECT, "CABLE_STATE_AC");
+ ret = gpio_request(GPIO_NR_TREO_POWER_DETECT, "CABLE_STATE_AC");
if (ret)
goto err1;
- ret = gpio_direction_input(GPIO_NR_TREO680_POWER_DETECT);
+ ret = gpio_direction_input(GPIO_NR_TREO_POWER_DETECT);
if (ret)
goto err2;
return 0;
err2:
- gpio_free(GPIO_NR_TREO680_POWER_DETECT);
+ gpio_free(GPIO_NR_TREO_POWER_DETECT);
err1:
return ret;
}
-static int treo680_is_ac_online(void)
+static int treo_is_ac_online(void)
{
- return gpio_get_value(GPIO_NR_TREO680_POWER_DETECT);
+ return gpio_get_value(GPIO_NR_TREO_POWER_DETECT);
}
static void power_supply_exit(struct device *dev)
{
- gpio_free(GPIO_NR_TREO680_POWER_DETECT);
+ gpio_free(GPIO_NR_TREO_POWER_DETECT);
}
-static char *treo680_supplicants[] = {
+static char *treo_supplicants[] = {
"main-battery",
};
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
- .is_ac_online = treo680_is_ac_online,
+ .is_ac_online = treo_is_ac_online,
.exit = power_supply_exit,
- .supplied_to = treo680_supplicants,
- .num_supplicants = ARRAY_SIZE(treo680_supplicants),
+ .supplied_to = treo_supplicants,
+ .num_supplicants = ARRAY_SIZE(treo_supplicants),
};
static struct platform_device power_supply = {
@@ -374,7 +488,8 @@ static struct platform_device power_supply = {
/******************************************************************************
* Vibra and LEDs
******************************************************************************/
-static struct gpio_led gpio_leds[] = {
+#ifdef CONFIG_MACH_TREO680
+static struct gpio_led treo680_gpio_leds[] = {
{
.name = "treo680:vibra:vibra",
.default_trigger = "none",
@@ -383,34 +498,68 @@ static struct gpio_led gpio_leds[] = {
{
.name = "treo680:green:led",
.default_trigger = "mmc0",
- .gpio = GPIO_NR_TREO680_GREEN_LED,
+ .gpio = GPIO_NR_TREO_GREEN_LED,
},
{
- .name = "treo680:keybbl:keybbl",
+ .name = "treo680:white:keybbl",
.default_trigger = "none",
.gpio = GPIO_NR_TREO680_KEYB_BL,
},
};
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
+static struct gpio_led_platform_data treo680_gpio_led_info = {
+ .leds = treo680_gpio_leds,
+ .num_leds = ARRAY_SIZE(treo680_gpio_leds),
};
static struct platform_device treo680_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
- .platform_data = &gpio_led_info,
+ .platform_data = &treo680_gpio_led_info,
}
};
+#endif /* CONFIG_MACH_TREO680 */
+#ifdef CONFIG_MACH_CENTRO
+static struct gpio_led centro_gpio_leds[] = {
+ {
+ .name = "centro:vibra:vibra",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_CENTRO_VIBRATE_EN,
+ },
+ {
+ .name = "centro:green:led",
+ .default_trigger = "mmc0",
+ .gpio = GPIO_NR_TREO_GREEN_LED,
+ },
+ {
+ .name = "centro:white:keybbl",
+ .default_trigger = "none",
+ .active_low = 1,
+ .gpio = GPIO_NR_CENTRO_KEYB_BL,
+ },
+};
+
+static struct gpio_led_platform_data centro_gpio_led_info = {
+ .leds = centro_gpio_leds,
+ .num_leds = ARRAY_SIZE(centro_gpio_leds),
+};
+
+static struct platform_device centro_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &centro_gpio_led_info,
+ }
+};
+#endif /* CONFIG_MACH_CENTRO */
/******************************************************************************
* Framebuffer
******************************************************************************/
/* TODO: add support for 324x324 */
-static struct pxafb_mode_info treo680_lcd_modes[] = {
+static struct pxafb_mode_info treo_lcd_modes[] = {
{
.pixclock = 86538,
.xres = 320,
@@ -427,21 +576,21 @@ static struct pxafb_mode_info treo680_lcd_modes[] = {
},
};
-static void treo680_lcd_power(int on, struct fb_var_screeninfo *info)
+static void treo_lcd_power(int on, struct fb_var_screeninfo *info)
{
- gpio_set_value(GPIO_NR_TREO680_BL_POWER, on);
+ gpio_set_value(GPIO_NR_TREO_BL_POWER, on);
}
-static struct pxafb_mach_info treo680_lcd_screen = {
- .modes = treo680_lcd_modes,
- .num_modes = ARRAY_SIZE(treo680_lcd_modes),
+static struct pxafb_mach_info treo_lcd_screen = {
+ .modes = treo_lcd_modes,
+ .num_modes = ARRAY_SIZE(treo_lcd_modes),
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
/******************************************************************************
* Power management - standby
******************************************************************************/
-static void __init treo680_pm_init(void)
+static void __init treo_pm_init(void)
{
static u32 resume[] = {
0xe3a00101, /* mov r0, #0x40000000 */
@@ -450,70 +599,118 @@ static void __init treo680_pm_init(void)
};
/* this is where the bootloader jumps */
- memcpy(phys_to_virt(TREO680_STR_BASE), resume, sizeof(resume));
+ memcpy(phys_to_virt(TREO_STR_BASE), resume, sizeof(resume));
}
/******************************************************************************
* Machine init
******************************************************************************/
-static struct platform_device *devices[] __initdata = {
- &treo680_backlight,
- &treo680_leds,
+static struct platform_device *treo_devices[] __initdata = {
+ &treo_backlight,
&power_supply,
};
+#ifdef CONFIG_MACH_TREO680
+static struct platform_device *treo680_devices[] __initdata = {
+ &treo680_leds,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static struct platform_device *centro_devices[] __initdata = {
+ &centro_leds,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
/* setup udc GPIOs initial state */
-static void __init treo680_udc_init(void)
+static void __init treo_udc_init(void)
{
- if (!gpio_request(GPIO_NR_TREO680_USB_PULLUP, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_TREO680_USB_PULLUP, 1);
- gpio_free(GPIO_NR_TREO680_USB_PULLUP);
+ if (!gpio_request(GPIO_NR_TREO_USB_PULLUP, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_TREO_USB_PULLUP, 1);
+ gpio_free(GPIO_NR_TREO_USB_PULLUP);
}
}
-static void __init treo680_lcd_power_init(void)
+static void __init treo_lcd_power_init(void)
{
int ret;
- ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
+ ret = gpio_request(GPIO_NR_TREO_LCD_POWER, "LCD POWER");
if (ret) {
pr_err("Treo680: LCD power GPIO request failed!\n");
return;
}
- ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
+ ret = gpio_direction_output(GPIO_NR_TREO_LCD_POWER, 0);
if (ret) {
pr_err("Treo680: setting LCD power GPIO direction failed!\n");
- gpio_free(GPIO_NR_TREO680_LCD_POWER);
+ gpio_free(GPIO_NR_TREO_LCD_POWER);
return;
}
- treo680_lcd_screen.pxafb_lcd_power = treo680_lcd_power;
+ treo_lcd_screen.pxafb_lcd_power = treo_lcd_power;
}
+static void __init treo_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ treo_pm_init();
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
+ treo_lcd_power_init();
+ set_pxa_fb_info(&treo_lcd_screen);
+ treo_udc_init();
+ pxa_set_udc_info(&treo_udc_info);
+ pxa_set_ac97_info(&treo_ac97_pdata);
+ pxa_set_ficp_info(&treo_ficp_info);
+
+ platform_add_devices(ARRAY_AND_SIZE(treo_devices));
+}
+
+#ifdef CONFIG_MACH_TREO680
static void __init treo680_init(void)
{
- treo680_pm_init();
+ treo_init();
pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
- pxa_set_keypad_info(&treo680_keypad_platform_data);
- treo680_lcd_power_init();
- set_pxa_fb_info(&treo680_lcd_screen);
pxa_set_mci_info(&treo680_mci_platform_data);
- treo680_udc_init();
- pxa_set_udc_info(&treo680_udc_info);
- pxa_set_ac97_info(&treo680_ac97_pdata);
- pxa_set_ficp_info(&treo680_ficp_info);
+ pxa_set_keypad_info(&treo680_keypad_platform_data);
pxa_set_ohci_info(&treo680_ohci_info);
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ platform_add_devices(ARRAY_AND_SIZE(treo680_devices));
}
MACHINE_START(TREO680, "Palm Treo 680")
- .phys_io = TREO680_PHYS_IO_START,
- .io_pg_offst = io_p2v(0x40000000),
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa27x_init_irq,
- .timer = &pxa_timer,
- .init_machine = treo680_init,
+ .phys_io = TREO_PHYS_IO_START,
+ .io_pg_offst = io_p2v(0x40000000),
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = treo680_init,
+MACHINE_END
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static void __init centro_init(void)
+{
+ treo_init();
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
+ pxa_set_mci_info(&centro_mci_platform_data);
+
+ pxa_set_keypad_info(&centro_keypad_platform_data);
+
+ platform_add_devices(ARRAY_AND_SIZE(centro_devices));
+}
+
+MACHINE_START(CENTRO, "Palm Centro 685")
+ .phys_io = TREO_PHYS_IO_START,
+ .io_pg_offst = io_p2v(0x40000000),
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = centro_init,
MACHINE_END
+#endif /* CONFIG_MACH_CENTRO */
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 76a2b37..7bf18c2 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -570,6 +570,10 @@ static void __init palmtx_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
palmtx_pm_init();
set_pxa_fb_info(&palmtx_lcd_screen);
pxa_set_mci_info(&palmtx_mci_platform_data);
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index c2bf493..d787ac7 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -491,6 +491,10 @@ static void __init palmz72_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
set_pxa_fb_info(&palmz72_lcd_screen);
pxa_set_mci_info(&palmz72_mci_platform_data);
palmz72_udc_init();
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 6abfa29..2190af0 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -227,6 +227,10 @@ static void __init pcm027_init(void)
pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
/* at last call the baseboard to initialize itself */
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index bbda570..d5255ae 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -359,19 +359,12 @@ static unsigned long pcm990_camera_pin_config[] = {
GPIO44_CIF_LV,
};
-static int pcm990_pxacamera_init(struct device *dev)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
- return 0;
-}
-
/*
* CICR4: PCLK_EN: Pixel clock is supplied by the sensor
* MCLK_EN: Master clock is generated by PXA
* PCP: Data sampled on the falling edge of pixel clock
*/
struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
- .init = pcm990_pxacamera_init,
.flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 |
PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/,
.mclk_10khz = 1000,
@@ -532,6 +525,7 @@ void __init pcm990_baseboard_init(void)
pxa_set_ac97_info(NULL);
#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
pxa_set_camera_info(&pcm990_pxacamera_platform_data);
i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index a186994..e5eeb3a 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -449,6 +449,10 @@ static void __init poodle_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
platform_scoop_config = &poodle_pcmcia_config;
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 77c2693..2c1b0b7 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -322,9 +322,6 @@ void __init pxa26x_init_irq(void)
static struct platform_device *pxa25x_devices[] __initdata = {
&pxa25x_device_udc,
- &pxa_device_ffuart,
- &pxa_device_btuart,
- &pxa_device_stuart,
&pxa_device_i2s,
&sa1100_device_rtc,
&pxa25x_device_ssp,
@@ -372,10 +369,8 @@ static int __init pxa25x_init(void)
}
/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
- if (cpu_is_pxa255()) {
+ if (cpu_is_pxa255())
clks_register(&pxa25x_hwuart_clkreg, 1);
- ret = platform_device_register(&pxa_device_hwuart);
- }
return ret;
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index ec68cc1..6a0b731 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -364,9 +364,6 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
static struct platform_device *devices[] __initdata = {
&pxa27x_device_udc,
- &pxa_device_ffuart,
- &pxa_device_btuart,
- &pxa_device_stuart,
&pxa_device_i2s,
&sa1100_device_rtc,
&pxa_device_rtc,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 09b7b1a..fcb0721 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -30,6 +30,7 @@
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/ssp.h>
+#include <mach/regs-intc.h>
#include <plat/i2c.h>
#include "generic.h"
@@ -45,6 +46,9 @@
#define ACCR_D0CS (1 << 26)
#define ACCR_PCCE (1 << 11)
+#define PECR_IE(n) ((1 << ((n) * 2)) << 28)
+#define PECR_IS(n) ((1 << ((n) * 2)) << 29)
+
/* crystal frequency to static memory controller multiplier (SMCFS) */
static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
@@ -237,6 +241,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5);
static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_u2d, USB2, 48000000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0);
static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0);
@@ -261,6 +266,7 @@ static struct clk_lookup pxa3xx_clkregs[] = {
INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
+ INIT_CLKREG(&clk_pxa3xx_u2d, NULL, "U2DCLK"),
INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),
@@ -530,6 +536,43 @@ static inline void pxa3xx_init_pm(void) {}
#define pxa3xx_set_wake NULL
#endif
+static void pxa_ack_ext_wakeup(unsigned int irq)
+{
+ PECR |= PECR_IS(irq - IRQ_WAKEUP0);
+}
+
+static void pxa_mask_ext_wakeup(unsigned int irq)
+{
+ ICMR2 &= ~(1 << ((irq - PXA_IRQ(0)) & 0x1f));
+ PECR &= ~PECR_IE(irq - IRQ_WAKEUP0);
+}
+
+static void pxa_unmask_ext_wakeup(unsigned int irq)
+{
+ ICMR2 |= 1 << ((irq - PXA_IRQ(0)) & 0x1f);
+ PECR |= PECR_IE(irq - IRQ_WAKEUP0);
+}
+
+static struct irq_chip pxa_ext_wakeup_chip = {
+ .name = "WAKEUP",
+ .ack = pxa_ack_ext_wakeup,
+ .mask = pxa_mask_ext_wakeup,
+ .unmask = pxa_unmask_ext_wakeup,
+};
+
+static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
+{
+ int irq;
+
+ for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
+ set_irq_chip(irq, &pxa_ext_wakeup_chip);
+ set_irq_handler(irq, handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ pxa_ext_wakeup_chip.set_wake = fn;
+}
+
void __init pxa3xx_init_irq(void)
{
/* enable CP6 access */
@@ -539,6 +582,7 @@ void __init pxa3xx_init_irq(void)
__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
pxa_init_irq(56, pxa3xx_set_wake);
+ pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
}
@@ -553,9 +597,6 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
static struct platform_device *devices[] __initdata = {
&pxa27x_device_udc,
- &pxa_device_ffuart,
- &pxa_device_btuart,
- &pxa_device_stuart,
&pxa_device_i2s,
&sa1100_device_rtc,
&pxa_device_rtc,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 8241a63..115b6f2 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -22,9 +22,13 @@
#include <linux/i2c.h>
#include <linux/smc91x.h>
#include <linux/mfd/da903x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
#include <mach/pxa930.h>
#include <plat/i2c.h>
@@ -33,7 +37,7 @@
#include "devices.h"
#include "generic.h"
-#define GPIO_LCD_RESET (16)
+#define GPIO_LCD_RESET (16)
/* SAAR MFP configurations */
static mfp_cfg_t saar_mfp_cfg[] __initdata = {
@@ -56,6 +60,31 @@ static mfp_cfg_t saar_mfp_cfg[] __initdata = {
/* Ethernet */
DF_nCS1_nCS3,
GPIO97_GPIO,
+
+ /* DFI */
+ DF_INT_RnB_ND_INT_RnB,
+ DF_nRE_nOE_ND_nRE,
+ DF_nWE_ND_nWE,
+ DF_CLE_nOE_ND_CLE,
+ DF_nADV1_ALE_ND_ALE,
+ DF_nADV2_ALE_nCS3,
+ DF_nCS0_ND_nCS0,
+ DF_IO0_ND_IO0,
+ DF_IO1_ND_IO1,
+ DF_IO2_ND_IO2,
+ DF_IO3_ND_IO3,
+ DF_IO4_ND_IO4,
+ DF_IO5_ND_IO5,
+ DF_IO6_ND_IO6,
+ DF_IO7_ND_IO7,
+ DF_IO8_ND_IO8,
+ DF_IO9_ND_IO9,
+ DF_IO10_ND_IO10,
+ DF_IO11_ND_IO11,
+ DF_IO12_ND_IO12,
+ DF_IO13_ND_IO13,
+ DF_IO14_ND_IO14,
+ DF_IO15_ND_IO15,
};
#define SAAR_ETH_PHYS (0x14000000)
@@ -451,10 +480,15 @@ static inline void saar_init_lcd(void) {}
#endif
#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct da9034_backlight_pdata saar_da9034_backlight = {
+ .output_current = 4, /* 4mA */
+};
+
static struct da903x_subdev_info saar_da9034_subdevs[] = {
[0] = {
.name = "da903x-backlight",
.id = DA9034_ID_WLED,
+ .platform_data = &saar_da9034_backlight,
},
};
@@ -480,12 +514,81 @@ static void __init saar_init_i2c(void)
#else
static inline void saar_init_i2c(void) {}
#endif
+
+#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
+static struct mtd_partition saar_onenand_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_1M,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_8M,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = (SZ_2M + SZ_1M),
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_48M,
+ .mask_flags = 0,
+ }
+};
+
+static struct onenand_platform_data saar_onenand_info = {
+ .parts = saar_onenand_partitions,
+ .nr_parts = ARRAY_SIZE(saar_onenand_partitions),
+};
+
+#define SMC_CS0_PHYS_BASE (0x10000000)
+
+static struct resource saar_resource_onenand[] = {
+ [0] = {
+ .start = SMC_CS0_PHYS_BASE,
+ .end = SMC_CS0_PHYS_BASE + SZ_1M,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device saar_device_onenand = {
+ .name = "onenand-flash",
+ .id = -1,
+ .dev = {
+ .platform_data = &saar_onenand_info,
+ },
+ .resource = saar_resource_onenand,
+ .num_resources = ARRAY_SIZE(saar_resource_onenand),
+};
+
+static void __init saar_init_onenand(void)
+{
+ platform_device_register(&saar_device_onenand);
+}
+#else
+static void __init saar_init_onenand(void) {}
+#endif
+
static void __init saar_init(void)
{
/* initialize MFP configurations */
pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
platform_device_register(&smc91x_device);
+ saar_init_onenand();
saar_init_i2c();
saar_init_lcd();
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 55259f4..1439785 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -42,8 +42,8 @@ void corgi_lcdtg_hw_init(int mode);
#define MAX1111_BATT_TEMP 2u
#define MAX1111_ACIN_VOLT 6u
-extern struct battery_thresh spitz_battery_levels_acin[];
-extern struct battery_thresh spitz_battery_levels_noac[];
+extern struct battery_thresh sharpsl_battery_levels_acin[];
+extern struct battery_thresh sharpsl_battery_levels_noac[];
int sharpsl_pm_pxa_read_max1111(int channel);
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 629e05d..67229a1 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -78,7 +78,7 @@ DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
-struct battery_thresh spitz_battery_levels_acin[] = {
+struct battery_thresh sharpsl_battery_levels_acin[] = {
{ 213, 100},
{ 212, 98},
{ 211, 95},
@@ -121,7 +121,7 @@ struct battery_thresh spitz_battery_levels_acin[] = {
{ 0, 0},
};
-struct battery_thresh spitz_battery_levels_noac[] = {
+struct battery_thresh sharpsl_battery_levels_noac[] = {
{ 213, 100},
{ 212, 98},
{ 211, 95},
@@ -165,19 +165,20 @@ struct battery_thresh spitz_battery_levels_noac[] = {
};
/* MAX1111 Commands */
-#define MAXCTRL_PD0 1u << 0
-#define MAXCTRL_PD1 1u << 1
-#define MAXCTRL_SGL 1u << 2
-#define MAXCTRL_UNI 1u << 3
+#define MAXCTRL_PD0 (1u << 0)
+#define MAXCTRL_PD1 (1u << 1)
+#define MAXCTRL_SGL (1u << 2)
+#define MAXCTRL_UNI (1u << 3)
#define MAXCTRL_SEL_SH 4
-#define MAXCTRL_STR 1u << 7
+#define MAXCTRL_STR (1u << 7)
/*
* Read MAX1111 ADC
*/
int sharpsl_pm_pxa_read_max1111(int channel)
{
- if (machine_is_tosa()) // Ugly, better move this function into another module
+ /* Ugly, better move this function into another module */
+ if (machine_is_tosa())
return 0;
#ifdef CONFIG_CORGI_SSP_DEPRECATED
@@ -238,7 +239,7 @@ EXPORT_SYMBOL(sharpsl_battery_kick);
static void sharpsl_battery_thread(struct work_struct *private_)
{
- int voltage, percent, apm_status, i = 0;
+ int voltage, percent, apm_status, i;
if (!sharpsl_pm.machinfo)
return;
@@ -250,15 +251,14 @@ static void sharpsl_battery_thread(struct work_struct *private_)
&& time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL))
schedule_delayed_work(&toggle_charger, 0);
- while(1) {
+ for (i = 0; i < 5; i++) {
voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-
- if (voltage > 0) break;
- if (i++ > 5) {
- voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
- dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+ if (voltage > 0)
break;
- }
+ }
+ if (voltage <= 0) {
+ voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+ dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
}
voltage = sharpsl_average_value(voltage);
@@ -266,8 +266,10 @@ static void sharpsl_battery_thread(struct work_struct *private_)
percent = get_percentage(voltage);
/* At low battery voltages, the voltage has a tendency to start
- creeping back up so we try to avoid this here */
- if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) {
+ creeping back up so we try to avoid this here */
+ if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
+ || (apm_status == APM_BATTERY_STATUS_HIGH)
+ || percent <= sharpsl_pm.battstat.mainbat_percent) {
sharpsl_pm.battstat.mainbat_voltage = voltage;
sharpsl_pm.battstat.mainbat_status = apm_status;
sharpsl_pm.battstat.mainbat_percent = percent;
@@ -279,8 +281,8 @@ static void sharpsl_battery_thread(struct work_struct *private_)
#ifdef CONFIG_BACKLIGHT_CORGI
/* If battery is low. limit backlight intensity to save power. */
if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
- && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
- (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
+ && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW)
+ || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
sharpsl_pm.machinfo->backlight_limit(1);
sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
@@ -293,8 +295,8 @@ static void sharpsl_battery_thread(struct work_struct *private_)
/* Suspend if critical battery level */
if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
- && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
- && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+ && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+ && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
dev_err(sharpsl_pm.dev, "Fatal Off\n");
apm_queue_event(APM_CRITICAL_SUSPEND);
@@ -346,7 +348,7 @@ static void sharpsl_charge_error(void)
static void sharpsl_charge_toggle(struct work_struct *private_)
{
- dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
+ dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
sharpsl_charge_off();
@@ -368,7 +370,7 @@ static void sharpsl_ac_timer(unsigned long data)
{
int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
- dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
+ dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
sharpsl_average_clear();
if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
@@ -472,14 +474,14 @@ static int sharpsl_average_value(int ad)
sharpsl_ad[sharpsl_ad_index] = ad;
sharpsl_ad_index++;
if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
- for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+ for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
sharpsl_ad[i] = sharpsl_ad[i+1];
sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
}
- for (i=0; i < sharpsl_ad_index; i++)
+ for (i = 0; i < sharpsl_ad_index; i++)
ad_val += sharpsl_ad[i];
- return (ad_val / sharpsl_ad_index);
+ return ad_val / sharpsl_ad_index;
}
/*
@@ -492,8 +494,8 @@ static int get_select_val(int *val)
/* Find MAX val */
temp = val[0];
- j=0;
- for (i=1; i<5; i++) {
+ j = 0;
+ for (i = 1; i < 5; i++) {
if (temp < val[i]) {
temp = val[i];
j = i;
@@ -502,21 +504,21 @@ static int get_select_val(int *val)
/* Find MIN val */
temp = val[4];
- k=4;
- for (i=3; i>=0; i--) {
+ k = 4;
+ for (i = 3; i >= 0; i--) {
if (temp > val[i]) {
temp = val[i];
k = i;
}
}
- for (i=0; i<5; i++)
- if (i != j && i != k )
+ for (i = 0; i < 5; i++)
+ if (i != j && i != k)
sum += val[i];
dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
- return (sum/3);
+ return sum/3;
}
static int sharpsl_check_battery_temp(void)
@@ -524,7 +526,7 @@ static int sharpsl_check_battery_temp(void)
int val, i, buff[5];
/* Check battery temperature */
- for (i=0; i<5; i++) {
+ for (i = 0; i < 5; i++) {
mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
sharpsl_pm.machinfo->measure_temp(1);
mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
@@ -557,7 +559,7 @@ static int sharpsl_check_battery_voltage(void)
sharpsl_pm.machinfo->discharge1(1);
/* Check battery voltage */
- for (i=0; i<5; i++) {
+ for (i = 0; i < 5; i++) {
buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
}
@@ -581,16 +583,16 @@ static int sharpsl_ac_check(void)
{
int temp, i, buff[5];
- for (i=0; i<5; i++) {
+ for (i = 0; i < 5; i++) {
buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
}
temp = get_select_val(buff);
- dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
+ dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
- dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
+ dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
return -1;
}
@@ -624,9 +626,9 @@ static int sharpsl_pm_resume(struct platform_device *pdev)
static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
{
- dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
+ dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
- dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+ dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
/* not charging and AC-IN! */
if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
@@ -644,12 +646,12 @@ static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable
if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
RTSR &= RTSR_ALE;
RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
- dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
+ dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
} else if (alarm_enable) {
RTSR &= RTSR_ALE;
RTAR = alarm_time;
- dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
+ dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
} else {
dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
}
@@ -658,19 +660,18 @@ static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable
sharpsl_pm.machinfo->postsuspend();
- dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
+ dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
}
static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
{
- if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
- {
+ if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
corgi_goto_sleep(alarm_time, alarm_enable, state);
return 1;
}
- if(sharpsl_off_charge_battery()) {
+ if (sharpsl_off_charge_battery()) {
dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
corgi_goto_sleep(alarm_time, alarm_enable, state);
return 1;
@@ -697,7 +698,7 @@ static int corgi_pxa_pm_enter(suspend_state_t state)
corgi_goto_sleep(alarm_time, alarm_status, state);
- while (corgi_enter_suspend(alarm_time,alarm_status,state))
+ while (corgi_enter_suspend(alarm_time, alarm_status, state))
{}
if (sharpsl_pm.machinfo->earlyresume)
@@ -732,7 +733,7 @@ static int sharpsl_fatal_check(void)
sharpsl_pm.machinfo->discharge1(1);
/* Check battery : check inserting battery ? */
- for (i=0; i<5; i++) {
+ for (i = 0; i < 5; i++) {
buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
}
@@ -812,7 +813,7 @@ static int sharpsl_off_charge_battery(void)
mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
time = RCNR;
- while(1) {
+ while (1) {
/* Check if any wakeup event had occurred */
if (sharpsl_pm.machinfo->charger_wakeup() != 0)
return 0;
@@ -835,9 +836,9 @@ static int sharpsl_off_charge_battery(void)
mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
time = RCNR;
- while(1) {
+ while (1) {
/* Check if any wakeup event had occurred */
- if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+ if (sharpsl_pm.machinfo->charger_wakeup())
return 0;
/* Check for timeout */
if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
@@ -864,12 +865,12 @@ static int sharpsl_off_charge_battery(void)
static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
+ return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
}
static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
+ return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
}
static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
@@ -943,8 +944,7 @@ static int __init sharpsl_pm_probe(struct platform_device *pdev)
}
}
- if (sharpsl_pm.machinfo->batfull_irq)
- {
+ if (sharpsl_pm.machinfo->batfull_irq) {
/* Register interrupt handler. */
if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index d98023f..4b50f14 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -768,6 +768,10 @@ static void __init common_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
spitz_init_spi();
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 724ffb0..fc5a70c 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -103,7 +103,7 @@ static void spitz_presuspend(void)
PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
- PKSR = 0xffffffff; // clear
+ PKSR = 0xffffffff; /* clear */
/* nRESET_OUT Disable */
PSLR |= PSLR_SL_ROD;
@@ -149,7 +149,7 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
if (resume_on_alarm && (PEDR & PWER_RTC))
is_resume |= PWER_RTC;
- dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
+ dev_dbg(sharpsl_pm.dev, "is_resume: %x\n", is_resume);
return is_resume;
}
@@ -160,7 +160,7 @@ static unsigned long spitz_charger_wakeup(void)
unsigned long spitzpm_read_devdata(int type)
{
- switch(type) {
+ switch (type) {
case SHARPSL_STATUS_ACIN:
return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
case SHARPSL_STATUS_LOCK:
@@ -199,7 +199,7 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
#if defined(CONFIG_LCD_CORGI)
.backlight_limit = corgi_lcd_limit_intensity,
#elif defined(CONFIG_BACKLIGHT_CORGI)
- .backlight_limit = corgibl_limit_intensity,
+ .backlight_limit = corgibl_limit_intensity,
#endif
.charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
.charge_on_temp = SHARPSL_CHARGE_ON_TEMP,
@@ -208,8 +208,8 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
.fatal_acin_volt = SHARPSL_FATAL_ACIN_VOLT,
.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
.bat_levels = 40,
- .bat_levels_noac = spitz_battery_levels_noac,
- .bat_levels_acin = spitz_battery_levels_acin,
+ .bat_levels_noac = sharpsl_battery_levels_noac,
+ .bat_levels_acin = sharpsl_battery_levels_acin,
.status_high_acin = 188,
.status_low_acin = 178,
.status_high_noac = 185,
@@ -241,7 +241,7 @@ static int __devinit spitzpm_init(void)
static void spitzpm_exit(void)
{
- platform_device_unregister(spitzpm_device);
+ platform_device_unregister(spitzpm_device);
}
module_init(spitzpm_init);
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 965e38c..9ebe658 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -342,8 +342,9 @@ void ssp_free(struct ssp_device *ssp)
}
EXPORT_SYMBOL(ssp_free);
-static int __devinit ssp_probe(struct platform_device *pdev, int type)
+static int __devinit ssp_probe(struct platform_device *pdev)
{
+ const struct platform_device_id *id = platform_get_device_id(pdev);
struct resource *res;
struct ssp_device *ssp;
int ret = 0;
@@ -413,7 +414,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type)
*/
ssp->port_id = pdev->id + 1;
ssp->use_count = 0;
- ssp->type = type;
+ ssp->type = (int)id->driver_data;
mutex_lock(&ssp_lock);
list_add(&ssp->node, &ssp_list);
@@ -457,75 +458,31 @@ static int __devexit ssp_remove(struct platform_device *pdev)
return 0;
}
-static int __devinit pxa25x_ssp_probe(struct platform_device *pdev)
-{
- return ssp_probe(pdev, PXA25x_SSP);
-}
-
-static int __devinit pxa25x_nssp_probe(struct platform_device *pdev)
-{
- return ssp_probe(pdev, PXA25x_NSSP);
-}
-
-static int __devinit pxa27x_ssp_probe(struct platform_device *pdev)
-{
- return ssp_probe(pdev, PXA27x_SSP);
-}
-
-static struct platform_driver pxa25x_ssp_driver = {
- .driver = {
- .name = "pxa25x-ssp",
- },
- .probe = pxa25x_ssp_probe,
- .remove = __devexit_p(ssp_remove),
+static const struct platform_device_id ssp_id_table[] = {
+ { "pxa25x-ssp", PXA25x_SSP },
+ { "pxa25x-nssp", PXA25x_NSSP },
+ { "pxa27x-ssp", PXA27x_SSP },
+ { },
};
-static struct platform_driver pxa25x_nssp_driver = {
- .driver = {
- .name = "pxa25x-nssp",
- },
- .probe = pxa25x_nssp_probe,
+static struct platform_driver ssp_driver = {
+ .probe = ssp_probe,
.remove = __devexit_p(ssp_remove),
-};
-
-static struct platform_driver pxa27x_ssp_driver = {
.driver = {
- .name = "pxa27x-ssp",
+ .owner = THIS_MODULE,
+ .name = "pxa2xx-ssp",
},
- .probe = pxa27x_ssp_probe,
- .remove = __devexit_p(ssp_remove),
+ .id_table = ssp_id_table,
};
static int __init pxa_ssp_init(void)
{
- int ret = 0;
-
- ret = platform_driver_register(&pxa25x_ssp_driver);
- if (ret) {
- printk(KERN_ERR "failed to register pxa25x_ssp_driver");
- return ret;
- }
-
- ret = platform_driver_register(&pxa25x_nssp_driver);
- if (ret) {
- printk(KERN_ERR "failed to register pxa25x_nssp_driver");
- return ret;
- }
-
- ret = platform_driver_register(&pxa27x_ssp_driver);
- if (ret) {
- printk(KERN_ERR "failed to register pxa27x_ssp_driver");
- return ret;
- }
-
- return ret;
+ return platform_driver_register(&ssp_driver);
}
static void __exit pxa_ssp_exit(void)
{
- platform_driver_unregister(&pxa25x_ssp_driver);
- platform_driver_unregister(&pxa25x_nssp_driver);
- platform_driver_unregister(&pxa27x_ssp_driver);
+ platform_driver_unregister(&ssp_driver);
}
arch_initcall(pxa_ssp_init);
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 3b205b6..a98a434 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -760,6 +760,10 @@ static void __init stargate2_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
/* spi chip selects */
gpio_direction_output(37, 0);
gpio_direction_output(24, 0);
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index b75353a..f02dcb5 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -477,6 +477,10 @@ static void __init tavorevb_init(void)
/* initialize MFP configurations */
pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
platform_device_register(&smc91x_device);
tavorevb_init_lcd();
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index e81a526..c854c16 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -825,6 +825,11 @@ static void __init tosa_init(void)
int dummy;
pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
gpio_set_wake(MFP_PIN_GPIO1, 1);
/* We can't pass to gpio-keys since it will drop the Reset altfunc */
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 3981e03..0aa858e 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -524,6 +524,10 @@ static void __init trizeps4_init(void)
ARRAY_SIZE(trizeps4_devices));
}
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
if (0) /* dont know how to determine LCD */
set_pxa_fb_info(&sharp_lcd);
else
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index d33c232..cf0d71b 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -301,15 +301,6 @@ static void __init viper_init_irq(void)
set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
viper_irq_handler);
set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
-
-#ifndef CONFIG_SERIAL_PXA
- /*
- * 8250 doesn't support IRQ_TYPE being passed as part
- * of the plat_serial8250_port structure...
- */
- set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING);
- set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING);
-#endif
}
/* Flat Panel */
@@ -539,6 +530,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = VIPER_UARTA_PHYS,
.irq = gpio_to_irq(VIPER_UARTA_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
.uartclk = 1843200,
.regshift = 1,
.iotype = UPIO_MEM,
@@ -548,6 +540,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = VIPER_UARTB_PHYS,
.irq = gpio_to_irq(VIPER_UARTB_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
.uartclk = 1843200,
.regshift = 1,
.iotype = UPIO_MEM,
@@ -908,6 +901,10 @@ static void __init viper_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
/* Wake-up serial console */
viper_init_serial_gpio();
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 3fd79cb..d3b4e3f 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -165,6 +165,11 @@ static void __init xcep_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ pxa_set_hwuart_info(NULL);
+
/* See Intel XScale Developer's Guide for details */
/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
MSC1 = (MSC1 & 0xffff) | 0xD5540000;
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 09784d3..b66e9e2 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -31,7 +31,7 @@
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pxa27x_keypad.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
#include "devices.h"
#include "generic.h"
@@ -444,6 +444,10 @@ static inline void zylonite_init_ohci(void) {}
static void __init zylonite_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
/* board-processor specific initialization */
zylonite_pxa300_init();
zylonite_pxa320_init();
OpenPOWER on IntegriCloud