8 files changed, 18 insertions, 22 deletions
diff --git a/arch/arm/mach-pxa/include/mach/clkdev.h b/arch/arm/mach-pxa/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index 955bfe6..7804637 100644
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -30,10 +30,6 @@ typedef enum {
 	DMA_PRIO_LOW = 2
 } pxa_dma_prio;
 
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define HAVE_ARCH_PCI_SET_DMA_MASK	1
-#endif
-
 /*
  * DMA registration
  */
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
index 4c90b13..efbd2aa 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -43,8 +43,10 @@
 #define GPIO_E800_PCMCIA_PWR1    73
 
 /* e7xx IrDA power control */
-#define GPIO_E7XX_IR_ON          38
+#define GPIO_E7XX_IR_OFF         38
 
 /* ASIC related GPIOs */
 #define GPIO_ESERIES_TMIO_IRQ        5
+#define GPIO_ESERIES_TMIO_PCLR      19
+#define GPIO_ESERIES_TMIO_SUSPEND   45
 #define GPIO_E800_ANGELX_IRQ      8
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index c666796..16ab795 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -299,6 +299,8 @@ extern unsigned long get_clock_tick_rate(void);
 #define PCIBIOS_MIN_IO		0
 #define PCIBIOS_MIN_MEM		0
 #define pcibios_assign_all_busses()	1
+#define HAVE_ARCH_PCI_SET_DMA_MASK	1
 #endif
 
+
 #endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
index 600fd4f..262691f 100644
--- a/arch/arm/mach-pxa/include/mach/io.h
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -6,15 +6,13 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <mach/hardware.h>
-
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
  * We don't actually have real ISA nor PCI buses, but there is so many
  * drivers out there that might just work if we fake them...
  */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index 59aef89..f626730 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -18,16 +18,6 @@
 #define PHYS_OFFSET	UL(0xa0000000)
 
 /*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-/*
  * The nodes are matched with the physical SDRAM banks as follows:
  *
  * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
@@ -47,6 +37,7 @@ void cmx2xx_pci_adjust_zones(int node, unsigned long *size,
 	cmx2xx_pci_adjust_zones(node, size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
 #endif
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
index 4d452fc..cfca815 100644
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -15,6 +15,7 @@
 #ifndef __ARCH_PXA_MTD_XIP_H__
 #define __ARCH_PXA_MTD_XIP_H__
 
+#include <mach/hardware.h>
 #include <mach/pxa-regs.h>
 
 #define xip_irqpending()	(ICIP & ICMR)
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
index 7b8842c..31e6a7b 100644
--- a/arch/arm/mach-pxa/include/mach/reset.h
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -12,9 +12,8 @@ extern void clear_reset_status(unsigned int mask);
 
 /**
  * init_gpio_reset() - register GPIO as reset generator
- *
- * @gpio - gpio nr
- * @output - set gpio as out/low instead of input during normal work
+ * @gpio: gpio nr
+ * @output: set gpio as out/low instead of input during normal work
  */
 extern int init_gpio_reset(int gpio, int output);