summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/em-x270.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/em-x270.c')
-rw-r--r--arch/arm/mach-pxa/em-x270.c173
1 files changed, 150 insertions, 23 deletions
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index bc0f73f..243e080 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -28,6 +28,8 @@
#include <linux/spi/libertas_spi.h>
#include <linux/power_supply.h>
#include <linux/apm-emulation.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
#include <media/soc_camera.h>
@@ -41,7 +43,7 @@
#include <mach/ohci.h>
#include <mach/mmc.h>
#include <mach/pxa27x_keypad.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/camera.h>
#include <mach/pxa2xx_spi.h>
@@ -52,23 +54,31 @@
#define GPIO13_MMC_CD (13)
#define GPIO95_MMC_WP (95)
#define GPIO56_NAND_RB (56)
+#define GPIO93_CAM_RESET (93)
+#define GPIO16_USB_HUB_RESET (16)
/* eXeda specific GPIOs */
#define GPIO114_MMC_CD (114)
#define GPIO20_NAND_RB (20)
#define GPIO38_SD_PWEN (38)
+#define GPIO37_WLAN_RST (37)
+#define GPIO95_TOUCHPAD_INT (95)
+#define GPIO130_CAM_RESET (130)
+#define GPIO10_USB_HUB_RESET (10)
/* common GPIOs */
#define GPIO11_NAND_CS (11)
-#define GPIO93_CAM_RESET (93)
#define GPIO41_ETHIRQ (41)
#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
#define GPIO115_WLAN_PWEN (115)
#define GPIO19_WLAN_STRAP (19)
+#define GPIO9_USB_VBUS_EN (9)
static int mmc_cd;
static int nand_rb;
static int dm9000_flags;
+static int cam_reset;
+static int usb_hub_reset;
static unsigned long common_pin_config[] = {
/* AC'97 */
@@ -180,7 +190,6 @@ static unsigned long common_pin_config[] = {
/* power controls */
GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
- GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */
GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
/* NAND controls */
@@ -191,14 +200,18 @@ static unsigned long common_pin_config[] = {
};
static unsigned long em_x270_pin_config[] = {
- GPIO13_GPIO, /* MMC card detect */
- GPIO56_GPIO, /* NAND Ready/Busy */
- GPIO95_GPIO, /* MMC Write protect */
+ GPIO13_GPIO, /* MMC card detect */
+ GPIO16_GPIO, /* USB hub reset */
+ GPIO56_GPIO, /* NAND Ready/Busy */
+ GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */
+ GPIO95_GPIO, /* MMC Write protect */
};
static unsigned long exeda_pin_config[] = {
+ GPIO10_GPIO, /* USB hub reset */
GPIO20_GPIO, /* NAND Ready/Busy */
GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */
+ GPIO95_GPIO, /* touchpad IRQ */
GPIO114_GPIO, /* MMC card detect */
};
@@ -464,18 +477,79 @@ static inline void em_x270_init_nor(void) {}
/* PXA27x OHCI controller setup */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct regulator *em_x270_usb_ldo;
+
+static int em_x270_usb_hub_init(void)
+{
+ int err;
+
+ em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
+ if (IS_ERR(em_x270_usb_ldo))
+ return PTR_ERR(em_x270_usb_ldo);
+
+ err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
+ if (err)
+ goto err_free_usb_ldo;
+
+ err = gpio_request(usb_hub_reset, "hub rst");
+ if (err)
+ goto err_free_vbus_gpio;
+
+ /* USB Hub power-on and reset */
+ gpio_direction_output(usb_hub_reset, 0);
+ regulator_enable(em_x270_usb_ldo);
+ gpio_set_value(usb_hub_reset, 1);
+ gpio_set_value(usb_hub_reset, 0);
+ regulator_disable(em_x270_usb_ldo);
+ regulator_enable(em_x270_usb_ldo);
+ gpio_set_value(usb_hub_reset, 1);
+
+ /* enable VBUS */
+ gpio_direction_output(GPIO9_USB_VBUS_EN, 1);
+
+ return 0;
+
+err_free_vbus_gpio:
+ gpio_free(GPIO9_USB_VBUS_EN);
+err_free_usb_ldo:
+ regulator_put(em_x270_usb_ldo);
+
+ return err;
+}
+
static int em_x270_ohci_init(struct device *dev)
{
+ int err;
+
+ /* we don't want to entirely disable USB if the HUB init failed */
+ err = em_x270_usb_hub_init();
+ if (err)
+ pr_err("USB Hub initialization failed: %d\n", err);
+
/* enable port 2 transiever */
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
return 0;
}
+static void em_x270_ohci_exit(struct device *dev)
+{
+ gpio_free(usb_hub_reset);
+ gpio_free(GPIO9_USB_VBUS_EN);
+
+ if (!IS_ERR(em_x270_usb_ldo)) {
+ if (regulator_is_enabled(em_x270_usb_ldo))
+ regulator_disable(em_x270_usb_ldo);
+
+ regulator_put(em_x270_usb_ldo);
+ }
+}
+
static struct pxaohci_platform_data em_x270_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
.init = em_x270_ohci_init,
+ .exit = em_x270_ohci_exit,
};
static void __init em_x270_init_ohci(void)
@@ -677,26 +751,52 @@ static int em_x270_libertas_setup(struct spi_device *spi)
if (err)
return err;
+ err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+ if (err)
+ goto err_free_pwen;
+
+ if (machine_is_exeda()) {
+ err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
+ if (err)
+ goto err_free_strap;
+
+ gpio_direction_output(GPIO37_WLAN_RST, 1);
+ msleep(100);
+ }
+
gpio_direction_output(GPIO19_WLAN_STRAP, 1);
- mdelay(100);
+ msleep(100);
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
gpio_direction_output(GPIO115_WLAN_PWEN, 0);
- mdelay(100);
+ msleep(100);
gpio_set_value(GPIO115_WLAN_PWEN, 1);
- mdelay(100);
+ msleep(100);
spi->bits_per_word = 16;
spi_setup(spi);
return 0;
+
+err_free_strap:
+ gpio_free(GPIO19_WLAN_STRAP);
+err_free_pwen:
+ gpio_free(GPIO115_WLAN_PWEN);
+
+ return err;
}
static int em_x270_libertas_teardown(struct spi_device *spi)
{
gpio_set_value(GPIO115_WLAN_PWEN, 0);
gpio_free(GPIO115_WLAN_PWEN);
+ gpio_free(GPIO19_WLAN_STRAP);
+
+ if (machine_is_exeda()) {
+ gpio_set_value(GPIO37_WLAN_RST, 0);
+ gpio_free(GPIO37_WLAN_RST);
+ }
return 0;
}
@@ -863,26 +963,26 @@ static int em_x270_sensor_init(struct device *dev)
{
int ret;
- ret = gpio_request(GPIO93_CAM_RESET, "camera reset");
+ ret = gpio_request(cam_reset, "camera reset");
if (ret)
return ret;
- gpio_direction_output(GPIO93_CAM_RESET, 0);
+ gpio_direction_output(cam_reset, 0);
em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
if (em_x270_camera_ldo == NULL) {
- gpio_free(GPIO93_CAM_RESET);
+ gpio_free(cam_reset);
return -ENODEV;
}
ret = regulator_enable(em_x270_camera_ldo);
if (ret) {
regulator_put(em_x270_camera_ldo);
- gpio_free(GPIO93_CAM_RESET);
+ gpio_free(cam_reset);
return ret;
}
- gpio_set_value(GPIO93_CAM_RESET, 1);
+ gpio_set_value(cam_reset, 1);
return 0;
}
@@ -902,7 +1002,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
if (on == is_on)
return 0;
- gpio_set_value(GPIO93_CAM_RESET, !on);
+ gpio_set_value(cam_reset, !on);
if (on)
ret = regulator_enable(em_x270_camera_ldo);
@@ -912,7 +1012,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
if (ret)
return ret;
- gpio_set_value(GPIO93_CAM_RESET, on);
+ gpio_set_value(cam_reset, on);
return 0;
}
@@ -929,13 +1029,8 @@ static struct i2c_board_info em_x270_i2c_cam_info[] = {
},
};
-static struct i2c_pxa_platform_data em_x270_i2c_info = {
- .fast_mode = 1,
-};
-
static void __init em_x270_init_camera(void)
{
- pxa_set_i2c_info(&em_x270_i2c_info);
i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
pxa_set_camera_info(&em_x270_camera_platform_data);
}
@@ -985,7 +1080,7 @@ struct led_info em_x270_led_info = {
};
struct power_supply_info em_x270_psy_info = {
- .name = "LP555597P6H-FPS",
+ .name = "battery",
.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
.voltage_max_design = 4200000,
.voltage_min_design = 3000000,
@@ -1069,6 +1164,29 @@ static void __init em_x270_init_da9030(void)
i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
}
+static struct pca953x_platform_data exeda_gpio_ext_pdata = {
+ .gpio_base = 128,
+};
+
+static struct i2c_board_info exeda_i2c_info[] = {
+ {
+ I2C_BOARD_INFO("pca9555", 0x21),
+ .platform_data = &exeda_gpio_ext_pdata,
+ },
+};
+
+static struct i2c_pxa_platform_data em_x270_i2c_info = {
+ .fast_mode = 1,
+};
+
+static void __init em_x270_init_i2c(void)
+{
+ pxa_set_i2c_info(&em_x270_i2c_info);
+
+ if (machine_is_exeda())
+ i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
+}
+
static void __init em_x270_module_init(void)
{
pr_info("%s\n", __func__);
@@ -1077,6 +1195,8 @@ static void __init em_x270_module_init(void)
mmc_cd = GPIO13_MMC_CD;
nand_rb = GPIO56_NAND_RB;
dm9000_flags = DM9000_PLATF_32BITONLY;
+ cam_reset = GPIO93_CAM_RESET;
+ usb_hub_reset = GPIO16_USB_HUB_RESET;
}
static void __init em_x270_exeda_init(void)
@@ -1087,12 +1207,18 @@ static void __init em_x270_exeda_init(void)
mmc_cd = GPIO114_MMC_CD;
nand_rb = GPIO20_NAND_RB;
dm9000_flags = DM9000_PLATF_16BITONLY;
+ cam_reset = GPIO130_CAM_RESET;
+ usb_hub_reset = GPIO10_USB_HUB_RESET;
}
static void __init em_x270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
+#ifdef CONFIG_PM
+ pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
if (machine_is_em_x270())
em_x270_module_init();
else if (machine_is_exeda())
@@ -1111,8 +1237,9 @@ static void __init em_x270_init(void)
em_x270_init_keypad();
em_x270_init_gpio_keys();
em_x270_init_ac97();
- em_x270_init_camera();
em_x270_init_spi();
+ em_x270_init_i2c();
+ em_x270_init_camera();
}
MACHINE_START(EM_X270, "Compulab EM-X270")
OpenPOWER on IntegriCloud