diff options
Diffstat (limited to 'arch/arm/mach-orion5x/dns323-setup.c')
| -rw-r--r-- | arch/arm/mach-orion5x/dns323-setup.c | 40 |
1 files changed, 20 insertions, 20 deletions
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index ec53f86..cd200f7 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -213,12 +213,6 @@ static struct platform_device dns323_button_device = { * General Setup */ -static struct platform_device *dns323_plat_devices[] __initdata = { - &dns323_nor_flash, - &dns323_gpio_leds, - &dns323_button_device, -}; - /* * On the DNS-323 the following devices are attached via I2C: * @@ -253,11 +247,6 @@ static void __init dns323_init(void) /* Setup basic Orion functions. Need to be called early. */ orion5x_init(); - /* setup flash mapping - * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 - */ - orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE); - /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIe * * Open a special address decode windows for the PCIe WA. @@ -294,21 +283,32 @@ static void __init dns323_init(void) */ orion5x_gpio_set_valid_pins(0x07f6); - /* register dns323 specific power-off method */ - if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || - gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) - pr_err("DNS323: failed to setup power-off GPIO\n"); + /* + * Configure peripherals. + */ + orion5x_ehci0_init(); + orion5x_eth_init(&dns323_eth_data); + orion5x_i2c_init(); + orion5x_uart0_init(); - pm_power_off = dns323_power_off; + /* setup flash mapping + * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 + */ + orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE); + platform_device_register(&dns323_nor_flash); + + platform_device_register(&dns323_gpio_leds); - /* register flash and other platform devices */ - platform_add_devices(dns323_plat_devices, - ARRAY_SIZE(dns323_plat_devices)); + platform_device_register(&dns323_button_device); i2c_register_board_info(0, dns323_i2c_devices, ARRAY_SIZE(dns323_i2c_devices)); - orion5x_eth_init(&dns323_eth_data); + /* register dns323 specific power-off method */ + if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || + gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) + pr_err("DNS323: failed to setup power-off GPIO\n"); + pm_power_off = dns323_power_off; } /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ |
