diff options
Diffstat (limited to 'arch/arm/mach-omap2')
36 files changed, 480 insertions, 678 deletions
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 95b384d..49e49d0 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -34,7 +34,7 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <plat/usb.h> #include "gpmc-smc91x.h" diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 2abbd6a..3e8725b 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -33,10 +33,10 @@ #include <plat/usb.h> #include "common.h" #include <plat-omap/dma-omap.h> -#include <plat/gpmc.h> #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> +#include "gpmc.h" #include "gpmc-smc91x.h" #include "board-flash.h" diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index cea3aba..8cdd186 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -35,7 +35,7 @@ #include <plat/led.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 376d26e..73e2ba9 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -40,7 +40,7 @@ #include "common.h" #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> @@ -53,6 +53,7 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc-nand.h" #define CM_T35_GPIO_PENDOWN 57 #define SB_T35_USB_HUB_RESET_GPIO 167 @@ -181,7 +182,7 @@ static struct omap_nand_platform_data cm_t35_nand_data = { static void __init cm_t35_init_nand(void) { - if (gpmc_nand_init(&cm_t35_nand_data) < 0) + if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0) pr_err("CM-T35: Unable to register NAND device\n"); } #else diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 59c0a45..b5495e4 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -41,7 +41,7 @@ #include "common.h" #include <plat/usb.h> #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "am35xx.h" @@ -49,6 +49,7 @@ #include "control.h" #include "common-board-devices.h" #include "am35xx-emac.h" +#include "gpmc-nand.h" #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led cm_t3517_leds[] = { @@ -240,7 +241,7 @@ static struct omap_nand_platform_data cm_t3517_nand_data = { static void __init cm_t3517_init_nand(void) { - if (gpmc_nand_init(&cm_t3517_nand_data) < 0) + if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0) pr_err("CM-T3517: NAND initialization failed\n"); } #else diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 1fd161e..3eedb8f 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -39,7 +39,7 @@ #include <asm/mach/flash.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <plat/usb.h> #include <video/omapdss.h> @@ -55,8 +55,11 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "mux.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + #define OMAP_DM9000_GPIO_IRQ 25 #define OMAP3_DEVKIT_TS_GPIO 27 @@ -621,8 +624,9 @@ static void __init devkit8000_init(void) usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, - ARRAY_SIZE(devkit8000_nand_partitions)); + board_nand_init(devkit8000_nand_partitions, + ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); omap_twl4030_audio_init("omap3beagle"); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index e642acf..020b96b 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -18,13 +18,15 @@ #include <linux/io.h> #include <plat/cpu.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <linux/platform_data/mtd-onenand-omap2.h> #include <plat/tc.h> #include "common.h" #include "board-flash.h" +#include "gpmc-onenand.h" +#include "gpmc-nand.h" #define REG_FPGA_REV 0x10 #define REG_FPGA_DIP_SWITCH_INPUT2 0x60 @@ -104,36 +106,35 @@ __init board_onenand_init(struct mtd_partition *onenand_parts, defined(CONFIG_MTD_NAND_OMAP2_MODULE) /* Note that all values in this struct are in nanoseconds */ -static struct gpmc_timings nand_timings = { +struct gpmc_timings nand_default_timings[1] = { + { + .sync_clk = 0, - .sync_clk = 0, + .cs_on = 0, + .cs_rd_off = 36, + .cs_wr_off = 36, - .cs_on = 0, - .cs_rd_off = 36, - .cs_wr_off = 36, + .adv_on = 6, + .adv_rd_off = 24, + .adv_wr_off = 36, - .adv_on = 6, - .adv_rd_off = 24, - .adv_wr_off = 36, + .we_off = 30, + .oe_off = 48, - .we_off = 30, - .oe_off = 48, + .access = 54, + .rd_cycle = 72, + .wr_cycle = 72, - .access = 54, - .rd_cycle = 72, - .wr_cycle = 72, - - .wr_access = 30, - .wr_data_mux_bus = 0, + .wr_access = 30, + .wr_data_mux_bus = 0, + }, }; -static struct omap_nand_platform_data board_nand_data = { - .gpmc_t = &nand_timings, -}; +static struct omap_nand_platform_data board_nand_data; void -__init board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type) +__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, + int nand_type, struct gpmc_timings *gpmc_t) { board_nand_data.cs = cs; board_nand_data.parts = nand_parts; @@ -141,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, board_nand_data.devsize = nand_type; board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT; - gpmc_nand_init(&board_nand_data); + gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ @@ -238,5 +239,6 @@ void __init board_flash_init(struct flash_partitions partition_info[], pr_err("NAND: Unable to find configuration in GPMC\n"); else board_nand_init(partition_info[2].parts, - partition_info[2].nr_parts, nandcs, nand_type); + partition_info[2].nr_parts, nandcs, + nand_type, nand_default_timings); } diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h index c44b70d..2fb5d41 100644 --- a/arch/arm/mach-omap2/board-flash.h +++ b/arch/arm/mach-omap2/board-flash.h @@ -12,7 +12,7 @@ */ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <plat/gpmc.h> +#include "gpmc.h" #define PDC_NOR 1 #define PDC_NAND 2 @@ -40,12 +40,14 @@ static inline void board_flash_init(struct flash_partitions part[], #if defined(CONFIG_MTD_NAND_OMAP2) || \ defined(CONFIG_MTD_NAND_OMAP2_MODULE) extern void board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type); + u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t); +extern struct gpmc_timings nand_default_timings[]; #else static inline void board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type) + u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t) { } +#define nand_default_timings NULL #endif #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index b3bab62..366ebd9 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -33,7 +33,6 @@ #include <plat/menelaus.h> #include <plat-omap/dma-omap.h> -#include <plat/gpmc.h> #include "debug-devices.h" #include <video/omapdss.h> @@ -42,6 +41,7 @@ #include "common.h" #include "mux.h" #include "control.h" +#include "gpmc.h" #define H4_FLASH_CS 0 #define H4_SMC91X_CS 1 diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 48d5e41..9a9a9b5 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -30,7 +30,7 @@ #include <asm/mach/arch.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <plat/usb.h> #include <video/omapdss.h> @@ -43,6 +43,7 @@ #include "common-board-devices.h" #include "board-flash.h" #include "control.h" +#include "gpmc-onenand.h" #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 @@ -175,7 +176,7 @@ static void __init igep_flash_init(void) pr_info("IGEP: initializing NAND memory device\n"); board_nand_init(igep_flash_partitions, ARRAY_SIZE(igep_flash_partitions), - 0, NAND_BUSWIDTH_16); + 0, NAND_BUSWIDTH_16, nand_default_timings); } else if (mux == IGEP_SYSBOOT_ONENAND) { pr_info("IGEP: initializing OneNAND memory device\n"); board_onenand_init(igep_flash_partitions, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index ee8c3cf..e1628cd 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -35,7 +35,7 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <mach/board-zoom.h> #include <plat/usb.h> #include "gpmc-smsc911x.h" @@ -420,8 +420,8 @@ static void __init omap_ldp_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); usb_musb_init(NULL); - board_nand_init(ldp_nand_partitions, - ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); + board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), + ZOOM_NAND_CS, 0, nand_default_timings); omap_hsmmc_init(mmc); ldp_display_init(); diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index d95f727..92b1916 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -32,6 +32,7 @@ #include <plat/mmc.h> #include "mux.h" +#include "gpmc-onenand.h" #define TUSB6010_ASYNC_CS 1 #define TUSB6010_SYNC_CS 4 diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 388c431..f11a5eb 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -41,7 +41,7 @@ #include "common.h" #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <plat/usb.h> #include <plat/omap_device.h> @@ -49,8 +49,11 @@ #include "mux.h" #include "hsmmc.h" #include "pm.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + /* * OMAP3 Beagle revision * Run time detection of Beagle revision is done by reading GPIO. @@ -512,8 +515,9 @@ static void __init omap3_beagle_init(void) usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, - ARRAY_SIZE(omap3beagle_nand_partitions)); + board_nand_init(omap3beagle_nand_partitions, + ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); omap_twl4030_audio_init("omap3beagle"); /* Ensure msecure is mux'd to be able to set the RTC. */ diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b9b776b..1d8e926 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -56,6 +56,9 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "board-flash.h" + +#define NAND_CS 0 #define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 @@ -731,8 +734,9 @@ static void __init omap3_evm_init(void) } usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions, - ARRAY_SIZE(omap3evm_nand_partitions)); + board_nand_init(omap3evm_nand_partitions, + ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 7bd8253..5cfade2 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -35,7 +35,7 @@ #include <asm/mach/map.h> #include "gpmc-smsc911x.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <plat/sdrc.h> #include <plat/usb.h> diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 00a1f4a..f286b4b 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -50,6 +50,7 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc-nand.h" #define PANDORA_WIFI_IRQ_GPIO 21 #define PANDORA_WIFI_NRESET_GPIO 23 @@ -602,7 +603,7 @@ static void __init omap3pandora_init(void) omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); usbhs_init(&usbhs_bdata); usb_musb_init(NULL); - gpmc_nand_init(&pandora_nand_data); + gpmc_nand_init(&pandora_nand_data, NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 731235e..3c83b9f 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -40,7 +40,7 @@ #include <asm/mach/flash.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <plat/usb.h> #include <video/omapdss.h> diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 944ffc4..cd282ae 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -44,12 +44,13 @@ #include <asm/system_info.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <plat/usb.h> #include "mux.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" #include <asm/setup.h> @@ -59,6 +60,8 @@ #define TB_BL_PWM_TIMER 9 #define TB_KILL_POWER_GPIO 168 +#define NAND_CS 0 + static unsigned long touchbook_revision; static struct mtd_partition omap3touchbook_nand_partitions[] = { @@ -365,8 +368,9 @@ static void __init omap3_touchbook_init(void) omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions, - ARRAY_SIZE(omap3touchbook_nand_partitions)); + board_nand_init(omap3touchbook_nand_partitions, + ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index b700685..3a9d1fa 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -49,14 +49,17 @@ #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include <plat/usb.h> #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 #define OVERO_GPIO_PENDOWN 114 @@ -495,8 +498,8 @@ static void __init overo_init(void) omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_nand_flash_init(0, overo_nand_partitions, - ARRAY_SIZE(overo_nand_partitions)); + board_nand_init(overo_nand_partitions, + ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); overo_spi_init(); diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 45997bf..3c3a473 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -25,7 +25,7 @@ #include <plat/i2c.h> #include <plat/mmc.h> #include <plat/usb.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "common.h" #include <plat/serial.h> @@ -33,6 +33,7 @@ #include "hsmmc.h" #include "sdram-nokia.h" #include "common-board-devices.h" +#include "gpmc-onenand.h" static struct regulator_consumer_supply rm680_vemmc_consumers[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 38b3f63..c2eed84 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -32,7 +32,6 @@ #include "common.h" #include <plat-omap/dma-omap.h> -#include <plat/gpmc.h> #include <plat/omap-pm.h> #include "gpmc-smc91x.h" @@ -54,6 +53,8 @@ #include "mux.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc.h" +#include "gpmc-onenand.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 #define SYSTEM_REV_S_USES_VAUX3 0x8 diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 3b1c03e..63b33c6 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -23,12 +23,12 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "common.h" #include <plat-omap/dma-omap.h> -#include <plat/gpmc.h> #include <plat/usb.h> +#include "common.h" #include "mux.h" +#include "gpmc.h" #include "pm.h" #include "sdram-nokia.h" diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index afb2278..be9f71d 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -17,7 +17,7 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "gpmc-smsc911x.h" #include <mach/board-zoom.h> diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 4994438..c39578c 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -113,8 +113,9 @@ static void __init omap_zoom_init(void) usbhs_init(&usbhs_bdata); } - board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions), - ZOOM_NAND_CS, NAND_BUSWIDTH_16); + board_nand_init(zoom_nand_partitions, + ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS, + NAND_BUSWIDTH_16, nand_default_timings); zoom_debugboard_init(); zoom_peripherals_init(); diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 48daac2..ad85609 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -25,7 +25,6 @@ #include <linux/spi/ads7846.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/platform_data/mtd-nand-omap2.h> #include "common.h" #include "common-board-devices.h" @@ -96,48 +95,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, { } #endif - -#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -static struct omap_nand_platform_data nand_data; - -void __init omap_nand_flash_init(int options, struct mtd_partition *parts, - int nr_parts) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - pr_info("NAND: Unable to find configuration in GPMC\n"); - return; - } - - if (nandcs < GPMC_CS_NUM) { - nand_data.cs = nandcs; - nand_data.parts = parts; - nand_data.nr_parts = nr_parts; - nand_data.devsize = options; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} -#else -void __init omap_nand_flash_init(int options, struct mtd_partition *parts, - int nr_parts) -{ -} -#endif diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index a0b4a428..72bb41b 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -10,6 +10,5 @@ struct ads7846_platform_data; void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct ads7846_platform_data *board_pdata); -void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts); #endif /* __OMAP_COMMON_BOARD_DEVICES__ */ diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 4acf497..8607735 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -17,9 +17,12 @@ #include <asm/mach/flash.h> -#include <plat/gpmc.h> - +#include "gpmc.h" #include "soc.h" +#include "gpmc-nand.h" + +/* minimum size for IO mapping */ +#define NAND_IO_SIZE 4 static struct resource gpmc_nand_resource[] = { { @@ -40,41 +43,36 @@ static struct platform_device gpmc_nand_device = { .resource = gpmc_nand_resource, }; -static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data) +static int omap2_nand_gpmc_retime( + struct omap_nand_platform_data *gpmc_nand_data, + struct gpmc_timings *gpmc_t) { struct gpmc_timings t; int err; - if (!gpmc_nand_data->gpmc_t) - return 0; - memset(&t, 0, sizeof(t)); - t.sync_clk = gpmc_nand_data->gpmc_t->sync_clk; - t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on); - t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on); + t.sync_clk = gpmc_t->sync_clk; + t.cs_on = gpmc_round_ns_to_ticks(gpmc_t->cs_on); + t.adv_on = gpmc_round_ns_to_ticks(gpmc_t->adv_on); /* Read */ - t.adv_rd_off = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->adv_rd_off); + t.adv_rd_off = gpmc_round_ns_to_ticks(gpmc_t->adv_rd_off); t.oe_on = t.adv_on; - t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access); - t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off); - t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off); - t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle); + t.access = gpmc_round_ns_to_ticks(gpmc_t->access); + t.oe_off = gpmc_round_ns_to_ticks(gpmc_t->oe_off); + t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_t->cs_rd_off); + t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_t->rd_cycle); /* Write */ - t.adv_wr_off = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->adv_wr_off); + t.adv_wr_off = gpmc_round_ns_to_ticks(gpmc_t->adv_wr_off); t.we_on = t.oe_on; if (cpu_is_omap34xx()) { - t.wr_data_mux_bus = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->wr_data_mux_bus); - t.wr_access = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->wr_access); + t.wr_data_mux_bus = gpmc_round_ns_to_ticks(gpmc_t->wr_data_mux_bus); + t.wr_access = gpmc_round_ns_to_ticks(gpmc_t->wr_access); } - t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off); - t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off); - t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle); + t.we_off = gpmc_round_ns_to_ticks(gpmc_t->we_off); + t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_t->cs_wr_off); + t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_t->wr_cycle); /* Configure GPMC */ if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) @@ -91,7 +89,29 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data return 0; } -int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) +static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) +{ + /* support only OMAP3 class */ + if (!cpu_is_omap34xx()) { + pr_err("BCH ecc is not supported on this CPU\n"); + return 0; + } + + /* + * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1. + * Other chips may be added if confirmed to work. + */ + if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) && + (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) { + pr_err("BCH 4-bit mode is not supported on this CPU\n"); + return 0; + } + + return 1; +} + +int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, + struct gpmc_timings *gpmc_t) { int err = 0; struct device *dev = &gpmc_nand_device.dev; @@ -112,11 +132,13 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); gpmc_nand_resource[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); - /* Set timings in GPMC */ - err = omap2_nand_gpmc_retime(gpmc_nand_data); - if (err < 0) { - dev_err(dev, "Unable to set gpmc timings: %d\n", err); - return err; + + if (gpmc_t) { + err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t); + if (err < 0) { + dev_err(dev, "Unable to set gpmc timings: %d\n", err); + return err; + } } /* Enable RD PIN Monitoring Reg */ @@ -126,6 +148,9 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); + if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) + return -EINVAL; + err = platform_device_register(&gpmc_nand_device); if (err < 0) { dev_err(dev, "Unable to register NAND device\n"); diff --git a/arch/arm/mach-omap2/gpmc-nand.h b/arch/arm/mach-omap2/gpmc-nand.h new file mode 100644 index 0000000..d59e128 --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-nand.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-omap2/gpmc-nand.h + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __OMAP2_GPMC_NAND_H +#define __OMAP2_GPMC_NAND_H + +#include "gpmc.h" +#include <linux/platform_data/mtd-nand-omap2.h> + +#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) +extern int gpmc_nand_init(struct omap_nand_platform_data *d, + struct gpmc_timings *gpmc_t); +#else +static inline int gpmc_nand_init(struct omap_nand_platform_data *d, + struct gpmc_timings *gpmc_t) +{ + return 0; +} +#endif + +#endif diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 916716e..d102183 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -16,15 +16,25 @@ #include <linux/mtd/onenand_regs.h> #include <linux/io.h> #include <linux/platform_data/mtd-onenand-omap2.h> +#include <linux/err.h> #include <asm/mach/flash.h> -#include <plat/gpmc.h> - +#include "gpmc.h" #include "soc.h" +#include "gpmc-onenand.h" #define ONENAND_IO_SIZE SZ_128K +#define ONENAND_FLAG_SYNCREAD (1 << 0) +#define ONENAND_FLAG_SYNCWRITE (1 << 1) +#define ONENAND_FLAG_HF (1 << 2) +#define ONENAND_FLAG_VHF (1 << 3) + +static unsigned onenand_flags; +static unsigned latency; +static int fclk_offset; + static struct omap_onenand_platform_data *gpmc_onenand_data; static struct resource gpmc_onenand_resource = { @@ -38,11 +48,9 @@ static struct platform_device gpmc_onenand_device = { .resource = &gpmc_onenand_resource, }; -static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) +static struct gpmc_timings omap2_onenand_calc_async_timings(void) { struct gpmc_timings t; - u32 reg; - int err; const int t_cer = 15; const int t_avdp = 12; @@ -55,11 +63,6 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) const int t_wpl = 40; const int t_wph = 30; - /* Ensure sync read and sync write are disabled */ - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); - reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; - writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); - memset(&t, 0, sizeof(t)); t.sync_clk = 0; t.cs_on = 0; @@ -86,25 +89,30 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph); t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez); + return t; +} + +static int gpmc_set_async_mode(int cs, struct gpmc_timings *t) +{ /* Configure GPMC for asynchronous read */ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16 | GPMC_CONFIG1_MUXADDDATA); - err = gpmc_cs_set_timings(cs, &t); - if (err) - return err; + return gpmc_cs_set_timings(cs, t); +} + +static void omap2_onenand_set_async_mode(void __iomem *onenand_base) +{ + u32 reg; /* Ensure sync read and sync write are disabled */ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); - - return 0; } -static void set_onenand_cfg(void __iomem *onenand_base, int latency, - int sync_read, int sync_write, int hf, int vhf) +static void set_onenand_cfg(void __iomem *onenand_base) { u32 reg; @@ -112,19 +120,19 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | ONENAND_SYS_CFG1_BL_16; - if (sync_read) + if (onenand_flags & ONENAND_FLAG_SYNCREAD) reg |= ONENAND_SYS_CFG1_SYNC_READ; else reg &= ~ONENAND_SYS_CFG1_SYNC_READ; - if (sync_write) + if (onenand_flags & ONENAND_FLAG_SYNCWRITE) reg |= ONENAND_SYS_CFG1_SYNC_WRITE; else reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE; - if (hf) + if (onenand_flags & ONENAND_FLAG_HF) reg |= ONENAND_SYS_CFG1_HF; else reg &= ~ONENAND_SYS_CFG1_HF; - if (vhf) + if (onenand_flags & ONENAND_FLAG_VHF) reg |= ONENAND_SYS_CFG1_VHF; else reg &= ~ONENAND_SYS_CFG1_VHF; @@ -132,21 +140,10 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, } static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, - void __iomem *onenand_base, bool *clk_dep) + void __iomem *onenand_base) { u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID); - int freq = 0; - - if (cfg->get_freq) { - struct onenand_freq_info fi; - - fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID); - fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID); - fi.ver_id = ver; - freq = cfg->get_freq(&fi, clk_dep); - if (freq) - return freq; - } + int freq; switch ((ver >> 4) & 0xf) { case 0: @@ -172,9 +169,9 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, return freq; } -static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, - void __iomem *onenand_base, - int *freq_ptr) +static struct gpmc_timings +omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, + int freq) { struct gpmc_timings t; const int t_cer = 15; @@ -184,29 +181,15 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, const int t_wpl = 40; const int t_wph = 30; int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; - int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; - int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0; - int err, ticks_cez; - int cs = cfg->cs, freq = *freq_ptr; u32 reg; - bool clk_dep = false; + int div, fclk_offset_ns, gpmc_clk_ns; + int ticks_cez; + int cs = cfg->cs; - if (cfg->flags & ONENAND_SYNC_READ) { - sync_read = 1; - } else if (cfg->flags & ONENAND_SYNC_READWRITE) { - sync_read = 1; - sync_write = 1; - } else - return omap2_onenand_set_async_mode(cs, onenand_base); - - if (!freq) { - /* Very first call freq is not known */ - err = omap2_onenand_set_async_mode(cs, onenand_base); - if (err) - return err; - freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep); - first_time = 1; - } + if (cfg->flags & ONENAND_SYNC_READ) + onenand_flags = ONENAND_FLAG_SYNCREAD; + else if (cfg->flags & ONENAND_SYNC_READWRITE) + onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE; switch (freq) { case 104: @@ -244,44 +227,31 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, t_ach = 9; t_aavdh = 7; t_rdyo = 15; - sync_write = 0; + onenand_flags &= ~ONENAND_FLAG_SYNCWRITE; break; } - div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period); + div = gpmc_calc_divider(min_gpmc_clk_period); gpmc_clk_ns = gpmc_ticks_to_ns(div); if (gpmc_clk_ns < 15) /* >66Mhz */ - hf = 1; + onenand_flags |= ONENAND_FLAG_HF; + else + onenand_flags &= ~ONENAND_FLAG_HF; if (gpmc_clk_ns < 12) /* >83Mhz */ - vhf = 1; - if (vhf) + onenand_flags |= ONENAND_FLAG_VHF; + else + onenand_flags &= ~ONENAND_FLAG_VHF; + if (onenand_flags & ONENAND_FLAG_VHF) latency = 8; - else if (hf) + else if (onenand_flags & ONENAND_FLAG_HF) latency = 6; else if (gpmc_clk_ns >= 25) /* 40 MHz*/ latency = 3; else latency = 4; - if (clk_dep) { - if (gpmc_clk_ns < 12) { /* >83Mhz */ - t_ces = 3; - t_avds = 4; - } else if (gpmc_clk_ns < 15) { /* >66Mhz */ - t_ces = 5; - t_avds = 4; - } else if (gpmc_clk_ns < 25) { /* >40Mhz */ - t_ces = 6; - t_avds = 5; - } else { - t_ces = 7; - t_avds = 7; - } - } - - if (first_time) - set_onenand_cfg(onenand_base, latency, - sync_read, sync_write, hf, vhf); + /* Set synchronous read timings */ + memset(&t, 0, sizeof(t)); if (div == 1) { reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2); @@ -307,8 +277,6 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg); } - /* Set synchronous read timings */ - memset(&t, 0, sizeof(t)); t.sync_clk = min_gpmc_clk_period; t.cs_on = 0; t.adv_on = 0; @@ -330,7 +298,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, ticks_cez); /* Write */ - if (sync_write) { + if (onenand_flags & ONENAND_FLAG_SYNCWRITE) { t.adv_wr_off = t.adv_rd_off; t.we_on = 0; t.we_off = t.cs_rd_off; @@ -355,6 +323,14 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, } } + return t; +} + +static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t) +{ + unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD; + unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE; + /* Configure GPMC for synchronous read */ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_WRAPBURST_SUPP | @@ -371,11 +347,45 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, GPMC_CONFIG1_DEVICETYPE_NOR | GPMC_CONFIG1_MUXADDDATA); - err = gpmc_cs_set_timings(cs, &t); - if (err) - return err; + return gpmc_cs_set_timings(cs, t); +} + +static int omap2_onenand_setup_async(void __iomem *onenand_base) +{ + struct gpmc_timings t; + int ret; + + omap2_onenand_set_async_mode(onenand_base); - set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf); + t = omap2_onenand_calc_async_timings(); + + ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t); + if (IS_ERR_VALUE(ret)) + return ret; + + omap2_onenand_set_async_mode(onenand_base); + + return 0; +} + +static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) +{ + int ret, freq = *freq_ptr; + struct gpmc_timings t; + + if (!freq) { + /* Very first call freq is not known */ + freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base); + set_onenand_cfg(onenand_base); + } + + t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq); + + ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t); + if (IS_ERR_VALUE(ret)) + return ret; + + set_onenand_cfg(onenand_base); *freq_ptr = freq; @@ -385,15 +395,22 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) { struct device *dev = &gpmc_onenand_device.dev; + unsigned l = ONENAND_SYNC_READ | ONENAND_SYNC_READWRITE; + int ret; - /* Set sync timings in GPMC */ - if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base, - freq_ptr) < 0) { - dev_err(dev, "Unable to set synchronous mode\n"); - return -EINVAL; + ret = omap2_onenand_setup_async(onenand_base); + if (ret) { + dev_err(dev, "unable to set to async mode\n"); + return ret; } - return 0; + if (!(gpmc_onenand_data->flags & l)) + return 0; + + ret = omap2_onenand_setup_sync(onenand_base, freq_ptr); + if (ret) + dev_err(dev, "unable to set to sync mode\n"); + return ret; } void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) @@ -411,6 +428,11 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) gpmc_onenand_data->flags |= ONENAND_SYNC_READ; } + if (cpu_is_omap34xx()) + gpmc_onenand_data->flags |= ONENAND_IN_OMAP34XX; + else + gpmc_onenand_data->flags &= ~ONENAND_IN_OMAP34XX; + err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, (unsigned long *)&gpmc_onenand_resource.start); if (err < 0) { diff --git a/arch/arm/mach-omap2/gpmc-onenand.h b/arch/arm/mach-omap2/gpmc-onenand.h new file mode 100644 index 0000000..216f23a --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-onenand.h @@ -0,0 +1,24 @@ +/* + * arch/arm/mach-omap2/gpmc-onenand.h + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __OMAP2_GPMC_ONENAND_H +#define __OMAP2_GPMC_ONENAND_H + +#include <linux/platform_data/mtd-onenand-omap2.h> + +#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) +extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); +#else +#define board_onenand_data NULL +static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) +{ +} +#endif + +#endif diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 5654753..6eed907 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -17,7 +17,7 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "gpmc-smc91x.h" #include "soc.h" diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 249a0b4..ef99011 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -20,7 +20,7 @@ #include <linux/io.h> #include <linux/smsc911x.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "gpmc-smsc911x.h" static struct resource gpmc_smsc911x_resources[] = { diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 5ac5cf3..f14bd3f 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -26,16 +26,17 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/platform_data/mtd-nand-omap2.h> + #include <asm/mach-types.h> -#include <plat/gpmc.h> #include <plat/cpu.h> -#include <plat/gpmc.h> #include <plat/sdrc.h> #include <plat/omap_device.h> #include "soc.h" #include "common.h" +#include "gpmc.h" #define DEVICE_NAME "omap-gpmc" @@ -59,6 +60,9 @@ #define GPMC_ECC_SIZE_CONFIG 0x1fc #define GPMC_ECC1_RESULT 0x200 #define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */ /* GPMC ECC control settings */ #define GPMC_ECC_CTRL_ECCCLEAR 0x100 @@ -75,6 +79,7 @@ #define GPMC_CS0_OFFSET 0x60 #define GPMC_CS_SIZE 0x30 +#define GPMC_BCH_SIZE 0x10 #define GPMC_MEM_START 0x00000000 #define GPMC_MEM_END 0x3FFFFFFF @@ -137,7 +142,6 @@ static struct resource gpmc_mem_root; static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); static unsigned int gpmc_cs_map; /* flag for cs which are initialized */ -static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */ static struct device *gpmc_dev; static int gpmc_irq; static resource_size_t phys_base, mem_size; @@ -158,22 +162,6 @@ static u32 gpmc_read_reg(int idx) return __raw_readl(gpmc_base + idx); } -static void gpmc_cs_write_byte(int cs, int idx, u8 val) -{ - void __iomem *reg_addr; - - reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - __raw_writeb(val, reg_addr); -} - -static u8 gpmc_cs_read_byte(int cs, int idx) -{ - void __iomem *reg_addr; - - reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - return __raw_readb(reg_addr); -} - void gpmc_cs_write_reg(int cs, int idx, u32 val) { void __iomem *reg_addr; @@ -288,7 +276,7 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, return -1 #endif -int gpmc_cs_calc_divider(int cs, unsigned int sync_clk) +int gpmc_calc_divider(unsigned int sync_clk) { int div; u32 l; @@ -308,7 +296,7 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) int div; u32 l; - div = gpmc_cs_calc_divider(cs, t->sync_clk); + div = gpmc_calc_divider(t->sync_clk); if (div < 0) return div; @@ -509,44 +497,6 @@ void gpmc_cs_free(int cs) EXPORT_SYMBOL(gpmc_cs_free); /** - * gpmc_read_status - read access request to get the different gpmc status - * @cmd: command type - * @return status - */ -int gpmc_read_status(int cmd) -{ - int status = -EINVAL; - u32 regval = 0; - - switch (cmd) { - case GPMC_GET_IRQ_STATUS: - status = gpmc_read_reg(GPMC_IRQSTATUS); - break; - - case GPMC_PREFETCH_FIFO_CNT: - regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); - status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval); - break; - - case GPMC_PREFETCH_COUNT: - regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); - status = GPMC_PREFETCH_STATUS_COUNT(regval); - break; - - case GPMC_STATUS_BUFFER: - regval = gpmc_read_reg(GPMC_STATUS); - /* 1 : buffer is available to write */ - status = regval & GPMC_STATUS_BUFF_EMPTY; - break; - - default: - printk(KERN_ERR "gpmc_read_status: Not supported\n"); - } - return status; -} -EXPORT_SYMBOL(gpmc_read_status); - -/** * gpmc_cs_configure - write request to configure gpmc * @cs: chip select number * @cmd: command type @@ -614,121 +564,10 @@ int gpmc_cs_configure(int cs, int cmd, int wval) } EXPORT_SYMBOL(gpmc_cs_configure); -/** - * gpmc_nand_read - nand specific read access request - * @cs: chip select number - * @cmd: command type - */ -int gpmc_nand_read(int cs, int cmd) -{ - int rval = -EINVAL; - - switch (cmd) { - case GPMC_NAND_DATA: - rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA); - break; - - default: - printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n"); - } - return rval; -} -EXPORT_SYMBOL(gpmc_nand_read); - -/** - * gpmc_nand_write - nand specific write request - * @cs: chip select number - * @cmd: command type - * @wval: value to write - */ -int gpmc_nand_write(int cs, int cmd, int wval) -{ - int err = 0; - - switch (cmd) { - case GPMC_NAND_COMMAND: - gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval); - break; - - case GPMC_NAND_ADDRESS: - gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval); - break; - - case GPMC_NAND_DATA: - gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval); - - default: - printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n"); - err = -EINVAL; - } - return err; -} -EXPORT_SYMBOL(gpmc_nand_write); - - - -/** - * gpmc_prefetch_enable - configures and starts prefetch transfer - * @cs: cs (chip select) number - * @fifo_th: fifo threshold to be used for read/ write - * @dma_mode: dma mode enable (1) or disable (0) - * @u32_count: number of bytes to be transferred - * @is_write: prefetch read(0) or write post(1) mode - */ -int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode, - unsigned int u32_count, int is_write) -{ - - if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) { - pr_err("gpmc: fifo threshold is not supported\n"); - return -1; - } else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) { - /* Set the amount of bytes to be prefetched */ - gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count); - - /* Set dma/mpu mode, the prefetch read / post write and - * enable the engine. Set which cs is has requested for. - */ - gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) | - PREFETCH_FIFOTHRESHOLD(fifo_th) | - ENABLE_PREFETCH | - (dma_mode << DMA_MPU_MODE) | - (0x1 & is_write))); - - /* Start the prefetch engine */ - gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1); - } else { - return -EBUSY; - } - - return 0; -} -EXPORT_SYMBOL(gpmc_prefetch_enable); - -/** - * gpmc_prefetch_reset - disables and stops the prefetch engine - */ -int gpmc_prefetch_reset(int cs) -{ - u32 config1; - - /* check if the same module/cs is trying to reset */ - config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1); - if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs) - return -EINVAL; - - /* Stop the PFPW engine */ - gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0); - - /* Reset/disable the PFPW engine */ - gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0); - - return 0; -} -EXPORT_SYMBOL(gpmc_prefetch_reset); - void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) { + int i; + reg->gpmc_status = gpmc_base + GPMC_STATUS; reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET + GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs; @@ -744,7 +583,17 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL; reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG; reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT; - reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0; + + for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) { + reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 + + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 + + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 + + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 + + GPMC_BCH_SIZE * i; + } } int gpmc_get_client_irq(unsigned irq_config) @@ -1079,267 +928,3 @@ void omap3_gpmc_restore_context(void) } } #endif /* CONFIG_ARCH_OMAP3 */ - -/** - * gpmc_enable_hwecc - enable hardware ecc functionality - * @cs: chip select number - * @mode: read/write mode - * @dev_width: device bus width(1 for x16, 0 for x8) - * @ecc_size: bytes for which ECC will be generated - */ -int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size) -{ - unsigned int val; - - /* check if ecc module is in used */ - if (gpmc_ecc_used != -EINVAL) - return -EINVAL; - - gpmc_ecc_used = cs; - - /* clear ecc and enable bits */ - gpmc_write_reg(GPMC_ECC_CONTROL, - GPMC_ECC_CTRL_ECCCLEAR | - GPMC_ECC_CTRL_ECCREG1); - - /* program ecc and result sizes */ - val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F)); - gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val); - - switch (mode) { - case GPMC_ECC_READ: - case GPMC_ECC_WRITE: - gpmc_write_reg(GPMC_ECC_CONTROL, - GPMC_ECC_CTRL_ECCCLEAR | - GPMC_ECC_CTRL_ECCREG1); - break; - case GPMC_ECC_READSYN: - gpmc_write_reg(GPMC_ECC_CONTROL, - GPMC_ECC_CTRL_ECCCLEAR | - GPMC_ECC_CTRL_ECCDISABLE); - break; - default: - printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode); - break; - } - - /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ - val = (dev_width << 7) | (cs << 1) | (0x1); - gpmc_write_reg(GPMC_ECC_CONFIG, val); - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_enable_hwecc); - -/** - * gpmc_calculate_ecc - generate non-inverted ecc bytes - * @cs: chip select number - * @dat: data pointer over which ecc is computed - * @ecc_code: ecc code buffer - * - * Using non-inverted ECC is considered ugly since writing a blank - * page (padding) will clear the ECC bytes. This is not a problem as long - * no one is trying to write data on the seemingly unused page. Reading - * an erased page will produce an ECC mismatch between generated and read - * ECC bytes that has to be dealt with separately. - */ -int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code) -{ - unsigned int val = 0x0; - - if (gpmc_ecc_used != cs) - return -EINVAL; - - /* read ecc result */ - val = gpmc_read_reg(GPMC_ECC1_RESULT); - *ecc_code++ = val; /* P128e, ..., P1e */ - *ecc_code++ = val >> 16; /* P128o, ..., P1o */ - /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ - *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); - - gpmc_ecc_used = -EINVAL; - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_calculate_ecc); - -#ifdef CONFIG_ARCH_OMAP3 - -/** - * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality - * @cs: chip select number - * @nsectors: how many 512-byte sectors to process - * @nerrors: how many errors to correct per sector (4 or 8) - * - * This function must be executed before any call to gpmc_enable_hwecc_bch. - */ -int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors) -{ - /* check if ecc module is in use */ - if (gpmc_ecc_used != -EINVAL) - return -EINVAL; - - /* support only OMAP3 class */ - if (!cpu_is_omap34xx()) { - printk(KERN_ERR "BCH ecc is not supported on this CPU\n"); - return -EINVAL; - } - - /* - * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1. - * Other chips may be added if confirmed to work. - */ - if ((nerrors == 4) && - (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) { - printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n"); - return -EINVAL; - } - - /* sanity check */ - if (nsectors > 8) { - printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n", - nsectors); - return -EINVAL; - } - - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch); - -/** - * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality - * @cs: chip select number - * @mode: read/write mode - * @dev_width: device bus width(1 for x16, 0 for x8) - * @nsectors: how many 512-byte sectors to process - * @nerrors: how many errors to correct per sector (4 or 8) - */ -int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors, - int nerrors) -{ - unsigned int val; - - /* check if ecc module is in use */ - if (gpmc_ecc_used != -EINVAL) - return -EINVAL; - - gpmc_ecc_used = cs; - - /* clear ecc and enable bits */ - gpmc_write_reg(GPMC_ECC_CONTROL, 0x1); - - /* - * When using BCH, sector size is hardcoded to 512 bytes. - * Here we are using wrapping mode 6 both for reading and writing, with: - * size0 = 0 (no additional protected byte in spare area) - * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) - */ - gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12)); - - /* BCH configuration */ - val = ((1 << 16) | /* enable BCH */ - (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */ - (0x06 << 8) | /* wrap mode = 6 */ - (dev_width << 7) | /* bus width */ - (((nsectors-1) & 0x7) << 4) | /* number of sectors */ - (cs << 1) | /* ECC CS */ - (0x1)); /* enable ECC */ - - gpmc_write_reg(GPMC_ECC_CONFIG, val); - gpmc_write_reg(GPMC_ECC_CONTROL, 0x101); - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch); - -/** - * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes - * @cs: chip select number - * @dat: The pointer to data on which ecc is computed - * @ecc: The ecc output buffer - */ -int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc) -{ - int i; - unsigned long nsectors, reg, val1, val2; - - if (gpmc_ecc_used != cs) - return -EINVAL; - - nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; - - for (i = 0; i < nsectors; i++) { - - reg = GPMC_ECC_BCH_RESULT_0 + 16*i; - - /* Read hw-computed remainder */ - val1 = gpmc_read_reg(reg + 0); - val2 = gpmc_read_reg(reg + 4); - - /* - * Add constant polynomial to remainder, in order to get an ecc - * sequence of 0xFFs for a buffer filled with 0xFFs; and - * left-justify the resulting polynomial. - */ - *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF); - *ecc++ = 0x13 ^ ((val2 >> 4) & 0xFF); - *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF)); - *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF); - *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF); - *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF); - *ecc++ = 0x7f ^ ((val1 & 0xF) << 4); - } - - gpmc_ecc_used = -EINVAL; - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4); - -/** - * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes - * @cs: chip select number - * @dat: The pointer to data on which ecc is computed - * @ecc: The ecc output buffer - */ -int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc) -{ - int i; - unsigned long nsectors, reg, val1, val2, val3, val4; - - if (gpmc_ecc_used != cs) - return -EINVAL; - - nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; - - for (i = 0; i < nsectors; i++) { - - reg = GPMC_ECC_BCH_RESULT_0 + 16*i; - - /* Read hw-computed remainder */ - val1 = gpmc_read_reg(reg + 0); - val2 = gpmc_read_reg(reg + 4); - val3 = gpmc_read_reg(reg + 8); - val4 = gpmc_read_reg(reg + 12); - - /* - * Add constant polynomial to remainder, in order to get an ecc - * sequence of 0xFFs for a buffer filled with 0xFFs. - */ - *ecc++ = 0xef ^ (val4 & 0xFF); - *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF); - *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF); - *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF); - *ecc++ = 0xed ^ (val3 & 0xFF); - *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF); - *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF); - *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF); - *ecc++ = 0x97 ^ (val2 & 0xFF); - *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF); - *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF); - *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF); - *ecc++ = 0xb5 ^ (val1 & 0xFF); - } - - gpmc_ecc_used = -EINVAL; - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8); - -#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h new file mode 100644 index 0000000..79f4dfc --- /dev/null +++ b/arch/arm/mach-omap2/gpmc.h @@ -0,0 +1,135 @@ +/* + * General-Purpose Memory Controller for OMAP2 + * + * Copyright (C) 2005-2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __OMAP2_GPMC_H +#define __OMAP2_GPMC_H + +#include <linux/platform_data/mtd-nand-omap2.h> + +/* Maximum Number of Chip Selects */ +#define GPMC_CS_NUM 8 + +#define GPMC_CS_CONFIG1 0x00 +#define GPMC_CS_CONFIG2 0x04 +#define GPMC_CS_CONFIG3 0x08 +#define GPMC_CS_CONFIG4 0x0c +#define GPMC_CS_CONFIG5 0x10 +#define GPMC_CS_CONFIG6 0x14 +#define GPMC_CS_CONFIG7 0x18 +#define GPMC_CS_NAND_COMMAND 0x1c +#define GPMC_CS_NAND_ADDRESS 0x20 +#define GPMC_CS_NAND_DATA 0x24 + +/* Control Commands */ +#define GPMC_CONFIG_RDY_BSY 0x00000001 +#define GPMC_CONFIG_DEV_SIZE 0x00000002 +#define GPMC_CONFIG_DEV_TYPE 0x00000003 +#define GPMC_SET_IRQ_STATUS 0x00000004 +#define GPMC_CONFIG_WP 0x00000005 + +#define GPMC_ENABLE_IRQ 0x0000000d + +/* ECC commands */ +#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */ +#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */ +#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */ + +#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) +#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) +#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) +#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29) +#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28) +#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27) +#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27) +#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25) +#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23) +#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22) +#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21) +#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18) +#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16) +#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12) +#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) +#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) +#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) +#define GPMC_CONFIG1_MUXADDDATA (1 << 9) +#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) +#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) +#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) +#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2)) +#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) +#define GPMC_CONFIG7_CSVALID (1 << 6) + +#define GPMC_DEVICETYPE_NOR 0 +#define GPMC_DEVICETYPE_NAND 2 +#define GPMC_CONFIG_WRITEPROTECT 0x00000010 +#define WR_RD_PIN_MONITORING 0x00600000 +#define GPMC_IRQ_FIFOEVENTENABLE 0x01 +#define GPMC_IRQ_COUNT_EVENT 0x02 + + +/* + * Note that all values in this struct are in nanoseconds except sync_clk + * (which is in picoseconds), while the register values are in gpmc_fck cycles. + */ +struct gpmc_timings { + /* Minimum clock period for synchronous mode (in picoseconds) */ + u32 sync_clk; + + /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */ + u16 cs_on; /* Assertion time */ + u16 cs_rd_off; /* Read deassertion time */ + u16 cs_wr_off; /* Write deassertion time */ + + /* ADV signal timings corresponding to GPMC_CONFIG3 */ + u16 adv_on; /* Assertion time */ + u16 adv_rd_off; /* Read deassertion time */ + u16 adv_wr_off; /* Write deassertion time */ + + /* WE signals timings corresponding to GPMC_CONFIG4 */ + u16 we_on; /* WE assertion time */ + u16 we_off; /* WE deassertion time */ + + /* OE signals timings corresponding to GPMC_CONFIG4 */ + u16 oe_on; /* OE assertion time */ + u16 oe_off; /* OE deassertion time */ + + /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */ + u16 page_burst_access; /* Multiple access word delay */ + u16 access; /* Start-cycle to first data valid delay */ + u16 rd_cycle; /* Total read cycle time */ + u16 wr_cycle; /* Total write cycle time */ + + /* The following are only on OMAP3430 */ + u16 wr_access; /* WRACCESSTIME */ + u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ +}; + +extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); +extern int gpmc_get_client_irq(unsigned irq_config); + +extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); +extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps); +extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); +extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); +extern unsigned long gpmc_get_fclk_period(void); + +extern void gpmc_cs_write_reg(int cs, int idx, u32 val); +extern u32 gpmc_cs_read_reg(int cs, int idx); +extern int gpmc_calc_divider(unsigned int sync_clk); +extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); +extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); +extern void gpmc_cs_free(int cs); +extern int gpmc_cs_set_reserved(int cs, int reserved); +extern int gpmc_cs_reserved(int cs); +extern void omap3_gpmc_save_context(void); +extern void omap3_gpmc_restore_context(void); +extern int gpmc_cs_configure(int cs, int cmd, int wval); + +#endif diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index baee872..001eff2 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -40,12 +40,12 @@ #include "powerdomain.h" #include <plat/sdrc.h> #include <plat/prcm.h> -#include <plat/gpmc.h> #include <plat-omap/dma-omap.h> #include "common.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" +#include "gpmc.h" #include "prm-regbits-34xx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 805bea6..6064425 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -18,7 +18,7 @@ #include <linux/usb/musb.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "mux.h" |
