diff options
Diffstat (limited to 'arch/arm/mach-omap2/sleep34xx.S')
| -rw-r--r-- | arch/arm/mach-omap2/sleep34xx.S | 282 |
1 files changed, 133 insertions, 149 deletions
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 951a0be..63f1066 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -64,6 +64,11 @@ #define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) #define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) +/* + * This file needs be built unconditionally as ARM to interoperate correctly + * with non-Thumb-2-capable firmware. + */ + .arm /* * API functions @@ -82,6 +87,8 @@ ENTRY(get_restore_pointer) stmfd sp!, {lr} @ save registers on stack adr r0, restore ldmfd sp!, {pc} @ restore regs and return +ENDPROC(get_restore_pointer) + .align ENTRY(get_restore_pointer_sz) .word . - get_restore_pointer @@ -91,6 +98,8 @@ ENTRY(get_omap3630_restore_pointer) stmfd sp!, {lr} @ save registers on stack adr r0, restore_3630 ldmfd sp!, {pc} @ restore regs and return +ENDPROC(get_omap3630_restore_pointer) + .align ENTRY(get_omap3630_restore_pointer_sz) .word . - get_omap3630_restore_pointer @@ -100,6 +109,8 @@ ENTRY(get_es3_restore_pointer) stmfd sp!, {lr} @ save registers on stack adr r0, restore_es3 ldmfd sp!, {pc} @ restore regs and return +ENDPROC(get_es3_restore_pointer) + .align ENTRY(get_es3_restore_pointer_sz) .word . - get_es3_restore_pointer @@ -113,8 +124,10 @@ ENTRY(enable_omap3630_toggle_l2_on_restore) stmfd sp!, {lr} @ save registers on stack /* Setup so that we will disable and enable l2 */ mov r1, #0x1 - str r1, l2dis_3630 + adrl r2, l2dis_3630 @ may be too distant for plain adr + str r1, [r2] ldmfd sp!, {pc} @ restore regs and return +ENDPROC(enable_omap3630_toggle_l2_on_restore) .text /* Function to call rom code to save secure ram context */ @@ -132,20 +145,22 @@ ENTRY(save_secure_ram_context) mov r1, #0 @ set task id for ROM code in r1 mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff - mcr p15, 0, r0, c7, c10, 4 @ data write barrier - mcr p15, 0, r0, c7, c10, 5 @ data memory barrier - .word 0xE1600071 @ call SMI monitor (smi #1) + dsb @ data write barrier + dmb @ data memory barrier + smc #1 @ call SMI monitor (smi #1) nop nop nop nop ldmfd sp!, {r1-r12, pc} + .align sram_phy_addr_mask: .word SRAM_BASE_P high_mask: .word 0xffff api_params: .word 0x4, 0x0, 0x0, 0x1, 0x1 +ENDPROC(save_secure_ram_context) ENTRY(save_secure_ram_context_sz) .word . - save_secure_ram_context @@ -175,12 +190,12 @@ ENTRY(omap34xx_cpu_suspend) stmfd sp!, {r0-r12, lr} @ save registers on stack /* - * r0 contains restore pointer in sdram + * r0 contains CPU context save/restore pointer in sdram * r1 contains information about saving context: * 0 - No context lost * 1 - Only L1 and logic lost - * 2 - Only L2 lost - * 3 - Both L1 and L2 lost + * 2 - Only L2 lost (Even L1 is retained we clean it along with L2) + * 3 - Both L1 and L2 lost and logic lost */ /* Directly jump to WFI is the context save is not required */ @@ -201,89 +216,74 @@ save_context_wfi: beq clean_caches l1_logic_lost: - /* Store sp and spsr to SDRAM */ - mov r4, sp - mrs r5, spsr - mov r6, lr + mov r4, sp @ Store sp + mrs r5, spsr @ Store spsr + mov r6, lr @ Store lr stmia r8!, {r4-r6} - /* Save all ARM registers */ - /* Coprocessor access control register */ - mrc p15, 0, r6, c1, c0, 2 - stmia r8!, {r6} - /* TTBR0, TTBR1 and Translation table base control */ - mrc p15, 0, r4, c2, c0, 0 - mrc p15, 0, r5, c2, c0, 1 - mrc p15, 0, r6, c2, c0, 2 - stmia r8!, {r4-r6} - /* - * Domain access control register, data fault status register, - * and instruction fault status register - */ - mrc p15, 0, r4, c3, c0, 0 - mrc p15, 0, r5, c5, c0, 0 - mrc p15, 0, r6, c5, c0, 1 - stmia r8!, {r4-r6} - /* - * Data aux fault status register, instruction aux fault status, - * data fault address register and instruction fault address register - */ - mrc p15, 0, r4, c5, c1, 0 - mrc p15, 0, r5, c5, c1, 1 - mrc p15, 0, r6, c6, c0, 0 - mrc p15, 0, r7, c6, c0, 2 - stmia r8!, {r4-r7} - /* - * user r/w thread and process ID, user r/o thread and process ID, - * priv only thread and process ID, cache size selection - */ - mrc p15, 0, r4, c13, c0, 2 - mrc p15, 0, r5, c13, c0, 3 - mrc p15, 0, r6, c13, c0, 4 - mrc p15, 2, r7, c0, c0, 0 + + mrc p15, 0, r4, c1, c0, 2 @ Coprocessor access control register + mrc p15, 0, r5, c2, c0, 0 @ TTBR0 + mrc p15, 0, r6, c2, c0, 1 @ TTBR1 + mrc p15, 0, r7, c2, c0, 2 @ TTBCR stmia r8!, {r4-r7} - /* Data TLB lockdown, instruction TLB lockdown registers */ - mrc p15, 0, r5, c10, c0, 0 - mrc p15, 0, r6, c10, c0, 1 - stmia r8!, {r5-r6} - /* Secure or non secure vector base address, FCSE PID, Context PID*/ - mrc p15, 0, r4, c12, c0, 0 - mrc p15, 0, r5, c13, c0, 0 - mrc p15, 0, r6, c13, c0, 1 - stmia r8!, {r4-r6} - /* Primary remap, normal remap registers */ - mrc p15, 0, r4, c10, c2, 0 - mrc p15, 0, r5, c10, c2, 1 - stmia r8!,{r4-r5} - /* Store current cpsr*/ - mrs r2, cpsr - stmia r8!, {r2} + mrc p15, 0, r4, c3, c0, 0 @ Domain access Control Register + mrc p15, 0, r5, c10, c2, 0 @ PRRR + mrc p15, 0, r6, c10, c2, 1 @ NMRR + stmia r8!,{r4-r6} - mrc p15, 0, r4, c1, c0, 0 - /* save control register */ + mrc p15, 0, r4, c13, c0, 1 @ Context ID + mrc p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID + mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address + mrs r7, cpsr @ Store current cpsr + stmia r8!, {r4-r7} + + mrc p15, 0, r4, c1, c0, 0 @ save control register stmia r8!, {r4} clean_caches: /* - * Clean Data or unified cache to POU - * How to invalidate only L1 cache???? - #FIX_ME# - * mcr p15, 0, r11, c7, c11, 1 - */ - cmp r1, #0x1 @ Check whether L2 inval is required - beq omap3_do_wfi - -clean_l2: - /* * jump out to kernel flush routine * - reuse that code is better * - it executes in a cached space so is faster than refetch per-block * - should be faster and will change with kernel * - 'might' have to copy address, load and jump to it + * Flush all data from the L1 data cache before disabling + * SCTLR.C bit. */ ldr r1, kernel_flush mov lr, pc bx r1 + /* + * Clear the SCTLR.C bit to prevent further data cache + * allocation. Clearing SCTLR.C would make all the data accesses + * strongly ordered and would not hit the cache. + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #(1 << 2) @ Disable the C bit + mcr p15, 0, r0, c1, c0, 0 + isb + + /* + * Invalidate L1 data cache. Even though only invalidate is + * necessary exported flush API is used here. Doing clean + * on already clean cache would be almost NOP. + */ + ldr r1, kernel_flush + blx r1 + /* + * The kernel doesn't interwork: v7_flush_dcache_all in particluar will + * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled. + * This sequence switches back to ARM. Note that .align may insert a + * nop: bx pc needs to be word-aligned in order to work. + */ + THUMB( .thumb ) + THUMB( .align ) + THUMB( bx pc ) + THUMB( nop ) + .arm + omap3_do_wfi: ldr r4, sdrc_power @ read the SDRC_POWER register ldr r5, [r4] @ read the contents of SDRC_POWER @@ -291,9 +291,8 @@ omap3_do_wfi: str r5, [r4] @ write back to SDRC_POWER register /* Data memory barrier and Data sync barrier */ - mov r1, #0 - mcr p15, 0, r1, c7, c10, 4 - mcr p15, 0, r1, c7, c10, 5 + dsb + dmb /* * =================================== @@ -319,6 +318,12 @@ omap3_do_wfi: nop bl wait_sdrc_ok + mrc p15, 0, r0, c1, c0, 0 + tst r0, #(1 << 2) @ Check C bit enabled? + orreq r0, r0, #(1 << 2) @ Enable the C bit if cleared + mcreq p15, 0, r0, c1, c0, 0 + isb + /* * =================================== * == Exit point from non-OFF modes == @@ -408,9 +413,9 @@ skipl2dis: mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff adr r3, l2_inv_api_params @ r3 points to dummy parameters - mcr p15, 0, r0, c7, c10, 4 @ data write barrier - mcr p15, 0, r0, c7, c10, 5 @ data memory barrier - .word 0xE1600071 @ call SMI monitor (smi #1) + dsb @ data write barrier + dmb @ data memory barrier + smc #1 @ call SMI monitor (smi #1) /* Write to Aux control register to set some bits */ mov r0, #42 @ set service ID for PPA mov r12, r0 @ copy secure Service ID in r12 @@ -419,9 +424,9 @@ skipl2dis: mov r6, #0xff ldr r4, scratchpad_base ldr r3, [r4, #0xBC] @ r3 points to parameters - mcr p15, 0, r0, c7, c10, 4 @ data write barrier - mcr p15, 0, r0, c7, c10, 5 @ data memory barrier - .word 0xE1600071 @ call SMI monitor (smi #1) + dsb @ data write barrier + dmb @ data memory barrier + smc #1 @ call SMI monitor (smi #1) #ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE /* Restore L2 aux control register */ @@ -434,29 +439,30 @@ skipl2dis: ldr r4, scratchpad_base ldr r3, [r4, #0xBC] adds r3, r3, #8 @ r3 points to parameters - mcr p15, 0, r0, c7, c10, 4 @ data write barrier - mcr p15, 0, r0, c7, c10, 5 @ data memory barrier - .word 0xE1600071 @ call SMI monitor (smi #1) + dsb @ data write barrier + dmb @ data memory barrier + smc #1 @ call SMI monitor (smi #1) #endif b logic_l1_restore + .align l2_inv_api_params: .word 0x1, 0x00 l2_inv_gp: /* Execute smi to invalidate L2 cache */ mov r12, #0x1 @ set up to invalidate L2 - .word 0xE1600070 @ Call SMI monitor (smieq) + smc #0 @ Call SMI monitor (smieq) /* Write to Aux control register to set some bits */ ldr r4, scratchpad_base ldr r3, [r4,#0xBC] ldr r0, [r3,#4] mov r12, #0x3 - .word 0xE1600070 @ Call SMI monitor (smieq) + smc #0 @ Call SMI monitor (smieq) ldr r4, scratchpad_base ldr r3, [r4,#0xBC] ldr r0, [r3,#12] mov r12, #0x2 - .word 0xE1600070 @ Call SMI monitor (smieq) + smc #0 @ Call SMI monitor (smieq) logic_l1_restore: ldr r1, l2dis_3630 cmp r1, #0x1 @ Test if L2 re-enable needed on 3630 @@ -475,68 +481,29 @@ skipl2reen: ldr r4, scratchpad_base ldr r3, [r4,#0xBC] adds r3, r3, #16 + ldmia r3!, {r4-r6} - mov sp, r4 - msr spsr_cxsf, r5 - mov lr, r6 - - ldmia r3!, {r4-r9} - /* Coprocessor access Control Register */ - mcr p15, 0, r4, c1, c0, 2 - - /* TTBR0 */ - MCR p15, 0, r5, c2, c0, 0 - /* TTBR1 */ - MCR p15, 0, r6, c2, c0, 1 - /* Translation table base control register */ - MCR p15, 0, r7, c2, c0, 2 - /* Domain access Control Register */ - MCR p15, 0, r8, c3, c0, 0 - /* Data fault status Register */ - MCR p15, 0, r9, c5, c0, 0 - - ldmia r3!,{r4-r8} - /* Instruction fault status Register */ - MCR p15, 0, r4, c5, c0, 1 - /* Data Auxiliary Fault Status Register */ - MCR p15, 0, r5, c5, c1, 0 - /* Instruction Auxiliary Fault Status Register*/ - MCR p15, 0, r6, c5, c1, 1 - /* Data Fault Address Register */ - MCR p15, 0, r7, c6, c0, 0 - /* Instruction Fault Address Register*/ - MCR p15, 0, r8, c6, c0, 2 - ldmia r3!,{r4-r7} + mov sp, r4 @ Restore sp + msr spsr_cxsf, r5 @ Restore spsr + mov lr, r6 @ Restore lr + + ldmia r3!, {r4-r7} + mcr p15, 0, r4, c1, c0, 2 @ Coprocessor access Control Register + mcr p15, 0, r5, c2, c0, 0 @ TTBR0 + mcr p15, 0, r6, c2, c0, 1 @ TTBR1 + mcr p15, 0, r7, c2, c0, 2 @ TTBCR - /* User r/w thread and process ID */ - MCR p15, 0, r4, c13, c0, 2 - /* User ro thread and process ID */ - MCR p15, 0, r5, c13, c0, 3 - /* Privileged only thread and process ID */ - MCR p15, 0, r6, c13, c0, 4 - /* Cache size selection */ - MCR p15, 2, r7, c0, c0, 0 - ldmia r3!,{r4-r8} - /* Data TLB lockdown registers */ - MCR p15, 0, r4, c10, c0, 0 - /* Instruction TLB lockdown registers */ - MCR p15, 0, r5, c10, c0, 1 - /* Secure or Nonsecure Vector Base Address */ - MCR p15, 0, r6, c12, c0, 0 - /* FCSE PID */ - MCR p15, 0, r7, c13, c0, 0 - /* Context PID */ - MCR p15, 0, r8, c13, c0, 1 - - ldmia r3!,{r4-r5} - /* Primary memory remap register */ - MCR p15, 0, r4, c10, c2, 0 - /* Normal memory remap register */ - MCR p15, 0, r5, c10, c2, 1 - - /* Restore cpsr */ - ldmia r3!,{r4} @ load CPSR from SDRAM - msr cpsr, r4 @ store cpsr + ldmia r3!,{r4-r6} + mcr p15, 0, r4, c3, c0, 0 @ Domain access Control Register + mcr p15, 0, r5, c10, c2, 0 @ PRRR + mcr p15, 0, r6, c10, c2, 1 @ NMRR + + + ldmia r3!,{r4-r7} + mcr p15, 0, r4, c13, c0, 1 @ Context ID + mcr p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID + mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address + msr cpsr, r7 @ store cpsr /* Enabling MMU here */ mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl @@ -594,12 +561,17 @@ usettbr0: ldr r2, cache_pred_disable_mask and r4, r2 mcr p15, 0, r4, c1, c0, 0 + dsb + isb + ldr r0, =restoremmu_on + bx r0 /* * ============================== * == Exit point from OFF mode == * ============================== */ +restoremmu_on: ldmfd sp!, {r0-r12, pc} @ restore regs and return @@ -609,6 +581,7 @@ usettbr0: /* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */ .text + .align 3 ENTRY(es3_sdrc_fix) ldr r4, sdrc_syscfg @ get config addr ldr r5, [r4] @ get value @@ -636,6 +609,7 @@ ENTRY(es3_sdrc_fix) str r5, [r4] @ kick off refreshes bx lr + .align sdrc_syscfg: .word SDRC_SYSCONFIG_P sdrc_mr_0: @@ -650,6 +624,7 @@ sdrc_emr2_1: .word SDRC_EMR2_1_P sdrc_manual_1: .word SDRC_MANUAL_1_P +ENDPROC(es3_sdrc_fix) ENTRY(es3_sdrc_fix_sz) .word . - es3_sdrc_fix @@ -684,6 +659,12 @@ wait_sdrc_ready: bic r5, r5, #0x40 str r5, [r4] +/* + * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a + * base instead. + * Be careful not to clobber r7 when maintaing this code. + */ + is_dll_in_lock_mode: /* Is dll in lock mode? */ ldr r4, sdrc_dlla_ctrl @@ -691,10 +672,11 @@ is_dll_in_lock_mode: tst r5, #0x4 bxne lr @ Return if locked /* wait till dll locks */ + adr r7, kick_counter wait_dll_lock_timed: ldr r4, wait_dll_lock_counter add r4, r4, #1 - str r4, wait_dll_lock_counter + str r4, [r7, #wait_dll_lock_counter - kick_counter] ldr r4, sdrc_dlla_status /* Wait 20uS for lock */ mov r6, #8 @@ -720,9 +702,10 @@ kick_dll: dsb ldr r4, kick_counter add r4, r4, #1 - str r4, kick_counter + str r4, [r7] @ kick_counter b wait_dll_lock_timed + .align cm_idlest1_core: .word CM_IDLEST1_CORE_V cm_idlest_ckgen: @@ -765,6 +748,7 @@ kick_counter: .word 0 wait_dll_lock_counter: .word 0 +ENDPROC(omap34xx_cpu_suspend) ENTRY(omap34xx_cpu_suspend_sz) .word . - omap34xx_cpu_suspend |
