1 files changed, 150 insertions, 5 deletions

diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 59a870b..c264ef7 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -1,8 +1,9 @@
 /*
  * OMAP4 Power Management Routines
  *
- * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010-2011 Texas Instruments, Inc.
  * Rajendra Nayak <rnayak@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,14 +17,17 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
+#include "common.h"
+#include "clockdomain.h"
 #include "powerdomain.h"
-#include <mach/omap4-common.h>
+#include "pm.h"
 
 struct power_state {
 	struct powerdomain *pwrdm;
 	u32 next_state;
 #ifdef CONFIG_SUSPEND
 	u32 saved_state;
+	u32 saved_logic_state;
 #endif
 	struct list_head node;
 };
@@ -33,7 +37,50 @@ static LIST_HEAD(pwrst_list);
 #ifdef CONFIG_SUSPEND
 static int omap4_pm_suspend(void)
 {
-	do_wfi();
+	struct power_state *pwrst;
+	int state, ret = 0;
+	u32 cpu_id = smp_processor_id();
+
+	/* Save current powerdomain state */
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
+		pwrst->saved_logic_state = pwrdm_read_logic_retst(pwrst->pwrdm);
+	}
+
+	/* Set targeted power domain states by suspend */
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+		pwrdm_set_logic_retst(pwrst->pwrdm, PWRDM_POWER_OFF);
+	}
+
+	/*
+	 * For MPUSS to hit power domain retention(CSWR or OSWR),
+	 * CPU0 and CPU1 power domains need to be in OFF or DORMANT state,
+	 * since CPU power domain CSWR is not supported by hardware
+	 * Only master CPU follows suspend path. All other CPUs follow
+	 * CPU hotplug path in system wide suspend. On OMAP4, CPU power
+	 * domain CSWR is not supported by hardware.
+	 * More details can be found in OMAP4430 TRM section 4.3.4.2.
+	 */
+	omap4_enter_lowpower(cpu_id, PWRDM_POWER_OFF);
+
+	/* Restore next powerdomain state */
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
+		if (state > pwrst->next_state) {
+			pr_info("Powerdomain (%s) didn't enter "
+			       "target state %d\n",
+			       pwrst->pwrdm->name, pwrst->next_state);
+			ret = -1;
+		}
+		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+		pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->saved_logic_state);
+	}
+	if (ret)
+		pr_crit("Could not enter target state in pm_suspend\n");
+	else
+		pr_info("Successfully put all powerdomains to target state\n");
+
 	return 0;
 }
 
@@ -73,6 +120,22 @@ static const struct platform_suspend_ops omap_pm_ops = {
 };
 #endif /* CONFIG_SUSPEND */
 
+/*
+ * Enable hardware supervised mode for all clockdomains if it's
+ * supported. Initiate sleep transition for other clockdomains, if
+ * they are not used
+ */
+static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
+{
+	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+		clkdm_allow_idle(clkdm);
+	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
+			atomic_read(&clkdm->usecount) == 0)
+		clkdm_sleep(clkdm);
+	return 0;
+}
+
+
 static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 {
 	struct power_state *pwrst;
@@ -80,14 +143,48 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 	if (!pwrdm->pwrsts)
 		return 0;
 
+	/*
+	 * Skip CPU0 and CPU1 power domains. CPU1 is programmed
+	 * through hotplug path and CPU0 explicitly programmed
+	 * further down in the code path
+	 */
+	if (!strncmp(pwrdm->name, "cpu", 3))
+		return 0;
+
+	/*
+	 * FIXME: Remove this check when core retention is supported
+	 * Only MPUSS power domain is added in the list.
+	 */
+	if (strcmp(pwrdm->name, "mpu_pwrdm"))
+		return 0;
+
 	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
 	if (!pwrst)
 		return -ENOMEM;
+
 	pwrst->pwrdm = pwrdm;
-	pwrst->next_state = PWRDM_POWER_ON;
+	pwrst->next_state = PWRDM_POWER_RET;
 	list_add(&pwrst->node, &pwrst_list);
 
-	return pwrdm_set_next_pwrst(pwrst->pwrdm, pwrst->next_state);
+	return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+}
+
+/**
+ * omap_default_idle - OMAP4 default ilde routine.'
+ *
+ * Implements OMAP4 memory, IO ordering requirements which can't be addressed
+ * with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
+ * by secondary CPU with CONFIG_CPUIDLE.
+ */
+static void omap_default_idle(void)
+{
+	local_irq_disable();
+	local_fiq_disable();
+
+	omap_do_wfi();
+
+	local_fiq_enable();
+	local_irq_enable();
 }
 
 /**
@@ -99,10 +196,17 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 static int __init omap4_pm_init(void)
 {
 	int ret;
+	struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm;
+	struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm;
 
 	if (!cpu_is_omap44xx())
 		return -ENODEV;
 
+	if (omap_rev() == OMAP4430_REV_ES1_0) {
+		WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
+		return -ENODEV;
+	}
+
 	pr_err("Power Management for TI OMAP4.\n");
 
 	ret = pwrdm_for_each(pwrdms_setup, NULL);
@@ -111,10 +215,51 @@ static int __init omap4_pm_init(void)
 		goto err2;
 	}
 
+	/*
+	 * The dynamic dependency between MPUSS -> MEMIF and
+	 * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
+	 * expected. The hardware recommendation is to enable static
+	 * dependencies for these to avoid system lock ups or random crashes.
+	 */
+	mpuss_clkdm = clkdm_lookup("mpuss_clkdm");
+	emif_clkdm = clkdm_lookup("l3_emif_clkdm");
+	l3_1_clkdm = clkdm_lookup("l3_1_clkdm");
+	l3_2_clkdm = clkdm_lookup("l3_2_clkdm");
+	l4_per_clkdm = clkdm_lookup("l4_per_clkdm");
+	ducati_clkdm = clkdm_lookup("ducati_clkdm");
+	if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) ||
+		(!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm))
+		goto err2;
+
+	ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm);
+	ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm);
+	ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm);
+	ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm);
+	ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
+	ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
+	if (ret) {
+		pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 "
+				"wakeup dependency\n");
+		goto err2;
+	}
+
+	ret = omap4_mpuss_init();
+	if (ret) {
+		pr_err("Failed to initialise OMAP4 MPUSS\n");
+		goto err2;
+	}
+
+	(void) clkdm_for_each(clkdms_setup, NULL);
+
 #ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);
 #endif /* CONFIG_SUSPEND */
 
+	/* Overwrite the default arch_idle() */
+	pm_idle = omap_default_idle;
+
+	omap4_idle_init();
+
 err2:
 	return ret;
 }