summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/pm34xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/pm34xx.c')
-rw-r--r--arch/arm/mach-omap2/pm34xx.c159
1 files changed, 13 insertions, 146 deletions
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 2f864e4..0c5e3a4 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -29,6 +29,7 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/console.h>
+#include <trace/events/power.h>
#include <plat/sram.h>
#include "clockdomain.h"
@@ -311,11 +312,6 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void restore_control_register(u32 val)
-{
- __asm__ __volatile__ ("mcr p15, 0, %0, c1, c0, 0" : : "r" (val));
-}
-
/* Function to restore the table entry that was modified for enabling MMU */
static void restore_table_entry(void)
{
@@ -337,7 +333,7 @@ static void restore_table_entry(void)
control_reg_value = __raw_readl(scratchpad_address
+ OMAP343X_CONTROL_REG_VALUE_OFFSET);
/* This will enable caches and prediction */
- restore_control_register(control_reg_value);
+ set_cr(control_reg_value);
}
void omap_sram_idle(void)
@@ -496,7 +492,7 @@ console_still_active:
pwrdm_post_transition();
- omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
+ clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
}
int omap3_can_sleep(void)
@@ -519,8 +515,14 @@ static void omap3_pm_idle(void)
if (omap_irq_pending() || need_resched())
goto out;
+ trace_power_start(POWER_CSTATE, 1, smp_processor_id());
+ trace_cpu_idle(1, smp_processor_id());
+
omap_sram_idle();
+ trace_power_end(smp_processor_id());
+ trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
+
out:
local_fiq_enable();
local_irq_enable();
@@ -688,149 +690,15 @@ static void __init omap3_d2d_idle(void)
static void __init prcm_setup_regs(void)
{
- u32 omap3630_auto_uart4_mask = cpu_is_omap3630() ?
- OMAP3630_AUTO_UART4_MASK : 0;
u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
OMAP3630_EN_UART4_MASK : 0;
u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
OMAP3630_GRPSEL_UART4_MASK : 0;
-
- /* XXX Reset all wkdeps. This should be done when initializing
- * powerdomains */
- omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
- omap2_prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
- omap2_prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
- omap2_prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
- omap2_prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
- omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
- if (omap_rev() > OMAP3430_REV_ES1_0) {
- omap2_prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
- omap2_prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
- } else
- omap2_prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
-
- /*
- * Enable interface clock autoidle for all modules.
- * Note that in the long run this should be done by clockfw
- */
- omap2_cm_write_mod_reg(
- OMAP3430_AUTO_MODEM_MASK |
- OMAP3430ES2_AUTO_MMC3_MASK |
- OMAP3430ES2_AUTO_ICR_MASK |
- OMAP3430_AUTO_AES2_MASK |
- OMAP3430_AUTO_SHA12_MASK |
- OMAP3430_AUTO_DES2_MASK |
- OMAP3430_AUTO_MMC2_MASK |
- OMAP3430_AUTO_MMC1_MASK |
- OMAP3430_AUTO_MSPRO_MASK |
- OMAP3430_AUTO_HDQ_MASK |
- OMAP3430_AUTO_MCSPI4_MASK |
- OMAP3430_AUTO_MCSPI3_MASK |
- OMAP3430_AUTO_MCSPI2_MASK |
- OMAP3430_AUTO_MCSPI1_MASK |
- OMAP3430_AUTO_I2C3_MASK |
- OMAP3430_AUTO_I2C2_MASK |
- OMAP3430_AUTO_I2C1_MASK |
- OMAP3430_AUTO_UART2_MASK |
- OMAP3430_AUTO_UART1_MASK |
- OMAP3430_AUTO_GPT11_MASK |
- OMAP3430_AUTO_GPT10_MASK |
- OMAP3430_AUTO_MCBSP5_MASK |
- OMAP3430_AUTO_MCBSP1_MASK |
- OMAP3430ES1_AUTO_FAC_MASK | /* This is es1 only */
- OMAP3430_AUTO_MAILBOXES_MASK |
- OMAP3430_AUTO_OMAPCTRL_MASK |
- OMAP3430ES1_AUTO_FSHOSTUSB_MASK |
- OMAP3430_AUTO_HSOTGUSB_MASK |
- OMAP3430_AUTO_SAD2D_MASK |
- OMAP3430_AUTO_SSI_MASK,
- CORE_MOD, CM_AUTOIDLE1);
-
- omap2_cm_write_mod_reg(
- OMAP3430_AUTO_PKA_MASK |
- OMAP3430_AUTO_AES1_MASK |
- OMAP3430_AUTO_RNG_MASK |
- OMAP3430_AUTO_SHA11_MASK |
- OMAP3430_AUTO_DES1_MASK,
- CORE_MOD, CM_AUTOIDLE2);
-
- if (omap_rev() > OMAP3430_REV_ES1_0) {
- omap2_cm_write_mod_reg(
- OMAP3430_AUTO_MAD2D_MASK |
- OMAP3430ES2_AUTO_USBTLL_MASK,
- CORE_MOD, CM_AUTOIDLE3);
- }
-
- omap2_cm_write_mod_reg(
- OMAP3430_AUTO_WDT2_MASK |
- OMAP3430_AUTO_WDT1_MASK |
- OMAP3430_AUTO_GPIO1_MASK |
- OMAP3430_AUTO_32KSYNC_MASK |
- OMAP3430_AUTO_GPT12_MASK |
- OMAP3430_AUTO_GPT1_MASK,
- WKUP_MOD, CM_AUTOIDLE);
-
- omap2_cm_write_mod_reg(
- OMAP3430_AUTO_DSS_MASK,
- OMAP3430_DSS_MOD,
- CM_AUTOIDLE);
-
- omap2_cm_write_mod_reg(
- OMAP3430_AUTO_CAM_MASK,
- OMAP3430_CAM_MOD,
- CM_AUTOIDLE);
-
- omap2_cm_write_mod_reg(
- omap3630_auto_uart4_mask |
- OMAP3430_AUTO_GPIO6_MASK |
- OMAP3430_AUTO_GPIO5_MASK |
- OMAP3430_AUTO_GPIO4_MASK |
- OMAP3430_AUTO_GPIO3_MASK |
- OMAP3430_AUTO_GPIO2_MASK |
- OMAP3430_AUTO_WDT3_MASK |
- OMAP3430_AUTO_UART3_MASK |
- OMAP3430_AUTO_GPT9_MASK |
- OMAP3430_AUTO_GPT8_MASK |
- OMAP3430_AUTO_GPT7_MASK |
- OMAP3430_AUTO_GPT6_MASK |
- OMAP3430_AUTO_GPT5_MASK |
- OMAP3430_AUTO_GPT4_MASK |
- OMAP3430_AUTO_GPT3_MASK |
- OMAP3430_AUTO_GPT2_MASK |
- OMAP3430_AUTO_MCBSP4_MASK |
- OMAP3430_AUTO_MCBSP3_MASK |
- OMAP3430_AUTO_MCBSP2_MASK,
- OMAP3430_PER_MOD,
- CM_AUTOIDLE);
-
- if (omap_rev() > OMAP3430_REV_ES1_0) {
- omap2_cm_write_mod_reg(
- OMAP3430ES2_AUTO_USBHOST_MASK,
- OMAP3430ES2_USBHOST_MOD,
- CM_AUTOIDLE);
- }
-
+ /* XXX This should be handled by hwmod code or SCM init code */
omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
/*
- * Set all plls to autoidle. This is needed until autoidle is
- * enabled by clockfw
- */
- omap2_cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
- OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
- omap2_cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
- MPU_MOD,
- CM_AUTOIDLE2);
- omap2_cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
- (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT),
- PLL_MOD,
- CM_AUTOIDLE);
- omap2_cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
- PLL_MOD,
- CM_AUTOIDLE2);
-
- /*
* Enable control of expternal oscillator through
* sys_clkreq. In the long run clock framework should
* take care of this.
@@ -928,8 +796,7 @@ void omap3_pm_off_mode_enable(int enable)
pwrst->pwrdm == core_pwrdm &&
state == PWRDM_POWER_OFF) {
pwrst->next_state = PWRDM_POWER_RET;
- WARN_ONCE(1,
- "%s: Core OFF disabled due to errata i583\n",
+ pr_warn("%s: Core OFF disabled due to errata i583\n",
__func__);
} else {
pwrst->next_state = state;
@@ -990,10 +857,10 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
{
if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
- omap2_clkdm_allow_idle(clkdm);
+ clkdm_allow_idle(clkdm);
else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
atomic_read(&clkdm->usecount) == 0)
- omap2_clkdm_sleep(clkdm);
+ clkdm_sleep(clkdm);
return 0;
}
OpenPOWER on IntegriCloud