summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/pm34xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/pm34xx.c')
-rw-r--r--arch/arm/mach-omap2/pm34xx.c30
1 files changed, 28 insertions, 2 deletions
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index ba670db..3a904de 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -652,14 +652,17 @@ static void __init pm_errata_configure(void)
/* Enable the l2 cache toggling in sleep logic */
enable_omap3630_toggle_l2_on_restore();
if (omap_rev() < OMAP3630_REV_ES1_2)
- pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583;
+ pm34xx_errata |= (PM_SDRC_WAKEUP_ERRATUM_i583 |
+ PM_PER_MEMORIES_ERRATUM_i582);
+ } else if (cpu_is_omap34xx()) {
+ pm34xx_errata |= PM_PER_MEMORIES_ERRATUM_i582;
}
}
int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
- struct clockdomain *neon_clkdm, *mpu_clkdm;
+ struct clockdomain *neon_clkdm, *mpu_clkdm, *per_clkdm, *wkup_clkdm;
int ret;
if (!omap3_has_io_chain_ctrl())
@@ -711,6 +714,8 @@ int __init omap3_pm_init(void)
neon_clkdm = clkdm_lookup("neon_clkdm");
mpu_clkdm = clkdm_lookup("mpu_clkdm");
+ per_clkdm = clkdm_lookup("per_clkdm");
+ wkup_clkdm = clkdm_lookup("wkup_clkdm");
#ifdef CONFIG_SUSPEND
omap_pm_suspend = omap3_pm_suspend;
@@ -727,6 +732,27 @@ int __init omap3_pm_init(void)
if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
omap3630_ctrl_disable_rta();
+ /*
+ * The UART3/4 FIFO and the sidetone memory in McBSP2/3 are
+ * not correctly reset when the PER powerdomain comes back
+ * from OFF or OSWR when the CORE powerdomain is kept active.
+ * See OMAP36xx Erratum i582 "PER Domain reset issue after
+ * Domain-OFF/OSWR Wakeup". This wakeup dependency is not a
+ * complete workaround. The kernel must also prevent the PER
+ * powerdomain from going to OSWR/OFF while the CORE
+ * powerdomain is not going to OSWR/OFF. And if PER last
+ * power state was off while CORE last power state was ON, the
+ * UART3/4 and McBSP2/3 SIDETONE devices need to run a
+ * self-test using their loopback tests; if that fails, those
+ * devices are unusable until the PER/CORE can complete a transition
+ * from ON to OSWR/OFF and then back to ON.
+ *
+ * XXX Technically this workaround is only needed if off-mode
+ * or OSWR is enabled.
+ */
+ if (IS_PM34XX_ERRATUM(PM_PER_MEMORIES_ERRATUM_i582))
+ clkdm_add_wkdep(per_clkdm, wkup_clkdm);
+
clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
omap3_secure_ram_storage =
OpenPOWER on IntegriCloud