1 files changed, 149 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
new file mode 100644
index 0000000..745252c
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -0,0 +1,149 @@
+/*
+  * This file configures the internal USB PHY in OMAP4430. Used
+  * with TWL6030 transceiver and MUSB on OMAP4430.
+  *
+  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation; either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * Author: Hema HK <hemahk@ti.com>
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program; if not, write to the Free Software
+  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+  *
+  */
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/usb.h>
+
+#include <plat/usb.h>
+
+/* OMAP control module register for UTMI PHY */
+#define CONTROL_DEV_CONF		0x300
+#define PHY_PD				0x1
+
+#define USBOTGHS_CONTROL		0x33c
+#define	AVALID				BIT(0)
+#define	BVALID				BIT(1)
+#define	VBUSVALID			BIT(2)
+#define	SESSEND				BIT(3)
+#define	IDDIG				BIT(4)
+
+static struct clk *phyclk, *clk48m, *clk32k;
+static void __iomem *ctrl_base;
+
+int omap4430_phy_init(struct device *dev)
+{
+	ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
+	if (!ctrl_base) {
+		dev_err(dev, "control module ioremap failed\n");
+		return -ENOMEM;
+	}
+	/* Power down the phy */
+	__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+	phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
+
+	if (IS_ERR(phyclk)) {
+		dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n");
+		iounmap(ctrl_base);
+		return PTR_ERR(phyclk);
+	}
+
+	clk48m = clk_get(dev, "ocp2scp_usb_phy_phy_48m");
+	if (IS_ERR(clk48m)) {
+		dev_err(dev, "cannot clk_get ocp2scp_usb_phy_phy_48m\n");
+		clk_put(phyclk);
+		iounmap(ctrl_base);
+		return PTR_ERR(clk48m);
+	}
+
+	clk32k = clk_get(dev, "usb_phy_cm_clk32k");
+	if (IS_ERR(clk32k)) {
+		dev_err(dev, "cannot clk_get usb_phy_cm_clk32k\n");
+		clk_put(phyclk);
+		clk_put(clk48m);
+		iounmap(ctrl_base);
+		return PTR_ERR(clk32k);
+	}
+	return 0;
+}
+
+int omap4430_phy_set_clk(struct device *dev, int on)
+{
+	static int state;
+
+	if (on && !state) {
+		/* Enable the phy clocks */
+		clk_enable(phyclk);
+		clk_enable(clk48m);
+		clk_enable(clk32k);
+		state = 1;
+	} else if (state) {
+		/* Disable the phy clocks */
+		clk_disable(phyclk);
+		clk_disable(clk48m);
+		clk_disable(clk32k);
+		state = 0;
+	}
+	return 0;
+}
+
+int omap4430_phy_power(struct device *dev, int ID, int on)
+{
+	if (on) {
+		/* enabled the clocks */
+		omap4430_phy_set_clk(dev, 1);
+		/* power on the phy */
+		if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
+			__raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+			mdelay(200);
+		}
+		if (ID)
+			/* enable VBUS valid, IDDIG groung */
+			__raw_writel(AVALID | VBUSVALID, ctrl_base +
+							USBOTGHS_CONTROL);
+		else
+			/*
+			 * Enable VBUS Valid, AValid and IDDIG
+			 * high impedence
+			 */
+			__raw_writel(IDDIG | AVALID | VBUSVALID,
+						ctrl_base + USBOTGHS_CONTROL);
+	} else {
+		/* Enable session END and IDIG to high impedence. */
+		__raw_writel(SESSEND | IDDIG, ctrl_base +
+					USBOTGHS_CONTROL);
+		/* Disable the clocks */
+		omap4430_phy_set_clk(dev, 0);
+		/* Power down the phy */
+		__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+	}
+
+	return 0;
+}
+
+int omap4430_phy_exit(struct device *dev)
+{
+	if (ctrl_base)
+		iounmap(ctrl_base);
+	if (phyclk)
+		clk_put(phyclk);
+	if (clk48m)
+		clk_put(clk48m);
+	if (clk32k)
+		clk_put(clk32k);
+
+	return 0;
+}