diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-omap3beagle.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3beagle.c | 13 |
1 files changed, 8 insertions, 5 deletions
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 9e5ada0..e39cd2c 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -28,6 +28,8 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> +#include <linux/i2c/twl4030.h> + #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -120,6 +122,9 @@ static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + omap_cfg_reg(AH8_34XX_GPIO29); + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -173,7 +178,9 @@ static int __init omap3_beagle_i2c_init(void) #ifdef CONFIG_I2C2_OMAP_BEAGLE omap_register_i2c_bus(2, 400, NULL, 0); #endif - omap_register_i2c_bus(3, 400, NULL, 0); + /* Bus 3 is attached to the DVI port where devices like the pico DLP + * projector don't work reliably with 400kHz */ + omap_register_i2c_bus(3, 100, NULL, 0); return 0; } @@ -304,10 +311,6 @@ static void __init omap3_beagle_init(void) omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); omap_serial_init(); - omap_cfg_reg(AH8_34XX_GPIO29); - mmc[0].gpio_cd = gpio + 0; - twl4030_mmc_init(mmc); - omap_cfg_reg(J25_34XX_GPIO170); gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ |
