diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-h4.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-h4.c | 135 |
1 files changed, 38 insertions, 97 deletions
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 5e9b146..e7d017c 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -33,10 +33,8 @@ #include <mach/control.h> #include <mach/gpio.h> -#include <mach/gpioexpander.h> #include <mach/mux.h> #include <mach/usb.h> -#include <mach/irda.h> #include <mach/board.h> #include <mach/common.h> #include <mach/keypad.h> @@ -47,6 +45,8 @@ #define H4_FLASH_CS 0 #define H4_SMC91X_CS 1 +#define H4_ETHR_GPIO_IRQ 92 + static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 }; static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 }; @@ -136,98 +136,6 @@ static struct platform_device h4_flash_device = { .resource = &h4_flash_resource, }; -/* Select between the IrDA and aGPS module - */ -static int h4_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x21))) { - printk(KERN_ERR "Error reading from I/O expander\n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDa */ - if ((err = write_gpio_expa(expa | 0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x20)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x01; - - if (!(mode & IR_SIRMODE)) { /* MIR/FIR */ - expa |= 0x01; - } - - if ((err = write_gpio_expa(expa, 0x20)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h4_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h4_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h4_transceiver_mode, - .select_irda = h4_select_irda, - .rx_channel = OMAP24XX_DMA_UART3_RX, - .tx_channel = OMAP24XX_DMA_UART3_TX, - .dest_start = OMAP_UART3_BASE, - .src_start = OMAP_UART3_BASE, - .tx_trigger = OMAP24XX_DMA_UART3_TX, - .rx_trigger = OMAP24XX_DMA_UART3_RX, -}; - -static struct resource h4_irda_resources[] = { - [0] = { - .start = INT_24XX_UART3_IRQ, - .end = INT_24XX_UART3_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device h4_irda_device = { - .name = "omapirda", - .id = -1, - .dev = { - .platform_data = &h4_irda_data, - }, - .num_resources = 1, - .resource = h4_irda_resources, -}; - static struct omap_kp_platform_data h4_kp_data = { .rows = 6, .cols = 7, @@ -253,7 +161,6 @@ static struct platform_device h4_lcd_device = { static struct platform_device *h4_devices[] __initdata = { &h4_flash_device, - &h4_irda_device, &h4_kp_device, &h4_lcd_device, }; @@ -341,7 +248,7 @@ static inline void __init h4_init_debug(void) udelay(100); omap_cfg_reg(M15_24XX_GPIO92); - if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0) + if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0) gpmc_cs_free(eth_cs); out: @@ -363,7 +270,7 @@ static void __init h4_init_flash(void) static void __init omap_h4_init_irq(void) { - omap2_init_common_hw(); + omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); h4_init_flash(); @@ -377,6 +284,39 @@ static struct omap_lcd_config h4_lcd_config __initdata = { .ctrl_name = "internal", }; +static struct omap_usb_config h4_usb_config __initdata = { +#ifdef CONFIG_MACH_OMAP2_H4_USB1 + /* NOTE: usb1 could also be used with 3 wire signaling */ + .pins[1] = 4, +#endif + +#ifdef CONFIG_MACH_OMAP_H4_OTG + /* S1.10 ON -- USB OTG port + * usb0 switched to Mini-AB port and isp1301 transceiver; + * S2.POS3 = OFF, S2.POS4 = ON ... to allow battery charging + */ + .otg = 1, + .pins[0] = 4, +#ifdef CONFIG_USB_GADGET_OMAP + /* use OTG cable, or standard A-to-MiniB */ + .hmc_mode = 0x14, /* 0:dev/otg 1:host 2:disable */ +#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + /* use OTG cable, or NONSTANDARD (B-to-MiniB) */ + .hmc_mode = 0x11, /* 0:host 1:host 2:disable */ +#endif /* XX */ + +#else + /* S1.10 OFF -- usb "download port" + * usb0 switched to Mini-B port and isp1105 transceiver; + * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging + */ + .register_dev = 1, + .pins[0] = 3, +/* .hmc_mode = 0x14,*/ /* 0:dev 1:host 2:disable */ + .hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */ +#endif +}; + static struct omap_board_config_kernel h4_config[] = { { OMAP_TAG_UART, &h4_uart_config }, { OMAP_TAG_LCD, &h4_lcd_config }, @@ -428,6 +368,7 @@ static void __init omap_h4_init(void) platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); omap_board_config = h4_config; omap_board_config_size = ARRAY_SIZE(h4_config); + omap_usb_init(&h4_usb_config); omap_serial_init(); } |
