summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-devkit8000.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/board-devkit8000.c')
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c30
1 files changed, 5 insertions, 25 deletions
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index a2010f0..b063f0d 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -47,7 +47,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
@@ -118,19 +118,6 @@ static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
gpio_set_value_cansleep(dssdev->reset_gpio, 0);
}
-static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
- if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value_cansleep(dssdev->reset_gpio, 1);
- return 0;
-}
-
-static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
- if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value_cansleep(dssdev->reset_gpio, 0);
-}
-
static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@@ -154,15 +141,14 @@ static struct omap_dss_device devkit8000_lcd_device = {
.phy.dpi.data_lines = 24,
};
-static struct panel_dvi_platform_data dvi_panel = {
- .platform_enable = devkit8000_panel_enable_dvi,
- .platform_disable = devkit8000_panel_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
+ .power_down_gpio = -1,
};
static struct omap_dss_device devkit8000_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "dvi",
+ .driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
@@ -244,13 +230,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
}
/* gpio + 7 is "DVI_PD" (out, active low) */
- devkit8000_dvi_device.reset_gpio = gpio + 7;
- ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
- GPIOF_OUT_INIT_LOW, "DVI PowerDown");
- if (ret < 0) {
- devkit8000_dvi_device.reset_gpio = -EINVAL;
- printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
- }
+ dvi_panel.power_down_gpio = gpio + 7;
return 0;
}
OpenPOWER on IntegriCloud