diff options
Diffstat (limited to 'arch/arm/mach-omap1')
| -rw-r--r-- | arch/arm/mach-omap1/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-ams-delta.c | 69 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-h2-mmc.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-h3-mmc.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-htcherald.c | 321 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-sx1-mmc.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/devices.c | 70 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/camera.h | 11 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/pm_bus.c | 98 |
9 files changed, 567 insertions, 13 deletions
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index facfaeb..9a304d8 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_OMAP_MPU_TIMER) += time.o obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o # Power Management -obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o # DSP obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 73c8639..1d4163b 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -16,9 +16,12 @@ #include <linux/init.h> #include <linux/input.h> #include <linux/interrupt.h> +#include <linux/leds.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> +#include <media/soc_camera.h> + #include <asm/serial.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -32,6 +35,7 @@ #include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> +#include <mach/camera.h> #include <mach/ams-delta-fiq.h> @@ -213,10 +217,56 @@ static struct platform_device ams_delta_led_device = { .id = -1 }; +static struct i2c_board_info ams_delta_camera_board_info[] = { + { + I2C_BOARD_INFO("ov6650", 0x60), + }, +}; + +#ifdef CONFIG_LEDS_TRIGGERS +DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger); + +static int ams_delta_camera_power(struct device *dev, int power) +{ + /* + * turn on camera LED + */ + if (power) + led_trigger_event(ams_delta_camera_led_trigger, LED_FULL); + else + led_trigger_event(ams_delta_camera_led_trigger, LED_OFF); + return 0; +} +#else +#define ams_delta_camera_power NULL +#endif + +static struct soc_camera_link __initdata ams_delta_iclink = { + .bus_id = 0, /* OMAP1 SoC camera bus */ + .i2c_adapter_id = 1, + .board_info = &ams_delta_camera_board_info[0], + .module_name = "ov6650", + .power = ams_delta_camera_power, +}; + +static struct platform_device ams_delta_camera_device = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &ams_delta_iclink, + }, +}; + +static struct omap1_cam_platform_data ams_delta_camera_platform_data = { + .camexclk_khz = 12000, /* default 12MHz clock, no extra DPLL */ + .lclk_khz_max = 1334, /* results in 5fps CIF, 10fps QCIF */ +}; + static struct platform_device *ams_delta_devices[] __initdata = { &ams_delta_kp_device, &ams_delta_lcd_device, &ams_delta_led_device, + &ams_delta_camera_device, }; static void __init ams_delta_init(void) @@ -225,6 +275,20 @@ static void __init ams_delta_init(void) omap_cfg_reg(UART1_TX); omap_cfg_reg(UART1_RTS); + /* parallel camera interface */ + omap_cfg_reg(H19_1610_CAM_EXCLK); + omap_cfg_reg(J15_1610_CAM_LCLK); + omap_cfg_reg(L18_1610_CAM_VS); + omap_cfg_reg(L15_1610_CAM_HS); + omap_cfg_reg(L19_1610_CAM_D0); + omap_cfg_reg(K14_1610_CAM_D1); + omap_cfg_reg(K15_1610_CAM_D2); + omap_cfg_reg(K19_1610_CAM_D3); + omap_cfg_reg(K18_1610_CAM_D4); + omap_cfg_reg(J14_1610_CAM_D5); + omap_cfg_reg(J19_1610_CAM_D6); + omap_cfg_reg(J18_1610_CAM_D7); + iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); omap_board_config = ams_delta_config; @@ -236,6 +300,11 @@ static void __init ams_delta_init(void) ams_delta_latch2_write(~0, 0); omap1_usb_init(&ams_delta_usb_config); + omap1_set_camera_info(&ams_delta_camera_platform_data); +#ifdef CONFIG_LEDS_TRIGGERS + led_trigger_register_simple("ams_delta_camera", + &ams_delta_camera_led_trigger); +#endif platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); #ifdef CONFIG_AMS_DELTA_FIQ diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index b30c499..f2fc43d 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -58,8 +58,7 @@ static struct omap_mmc_platform_data mmc1_data = { .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, - .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 | - MMC_VDD_32_33 | MMC_VDD_33_34, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .name = "mmcblk", }, }; diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 54b0f06..2098525 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -40,8 +40,7 @@ static struct omap_mmc_platform_data mmc1_data = { .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, - .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 | - MMC_VDD_32_33 | MMC_VDD_33_34, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .name = "mmcblk", }, }; diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 86afb29..071af3e 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -30,6 +30,13 @@ #include <linux/input.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/htcpld.h> +#include <linux/leds.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,6 +46,7 @@ #include <plat/board.h> #include <plat/keypad.h> #include <plat/usb.h> +#include <plat/mmc.h> #include <mach/irqs.h> @@ -52,13 +60,123 @@ #define OMAP_LCDC_CTRL_LCD_EN (1 << 0) #define OMAP_LCDC_STAT_DONE (1 << 0) -static struct omap_lcd_config htcherald_lcd_config __initdata = { - .ctrl_name = "internal", -}; +/* GPIO definitions for the power button and keyboard slide switch */ +#define HTCHERALD_GPIO_POWER 139 +#define HTCHERALD_GPIO_SLIDE 174 +#define HTCHERALD_GIRQ_BTNS 141 -static struct omap_board_config_kernel htcherald_config[] __initdata = { - { OMAP_TAG_LCD, &htcherald_lcd_config }, -}; +/* GPIO definitions for the touchscreen */ +#define HTCHERALD_GPIO_TS 76 + +/* HTCPLD definitions */ + +/* + * CPLD Logic + * + * Chip 3 - 0x03 + * + * Function 7 6 5 4 3 2 1 0 + * ------------------------------------ + * DPAD light x x x x x x x 1 + * SoundDev x x x x 1 x x x + * Screen white 1 x x x x x x x + * MMC power on x x x x x 1 x x + * Happy times (n) 0 x x x x 1 x x + * + * Chip 4 - 0x04 + * + * Function 7 6 5 4 3 2 1 0 + * ------------------------------------ + * Keyboard light x x x x x x x 1 + * LCD Bright (4) x x x x x 1 1 x + * LCD Bright (3) x x x x x 0 1 x + * LCD Bright (2) x x x x x 1 0 x + * LCD Bright (1) x x x x x 0 0 x + * LCD Off x x x x 0 x x x + * LCD image (fb) 1 x x x x x x x + * LCD image (white) 0 x x x x x x x + * Caps lock LED x x 1 x x x x x + * + * Chip 5 - 0x05 + * + * Function 7 6 5 4 3 2 1 0 + * ------------------------------------ + * Red (solid) x x x x x 1 x x + * Red (flash) x x x x x x 1 x + * Green (GSM flash) x x x x 1 x x x + * Green (GSM solid) x x x 1 x x x x + * Green (wifi flash) x x 1 x x x x x + * Blue (bt flash) x 1 x x x x x x + * DPAD Int Enable 1 x x x x x x 0 + * + * (Combinations of the above can be made for different colors.) + * The direction pad interrupt enable must be set each time the + * interrupt is handled. + * + * Chip 6 - 0x06 + * + * Function 7 6 5 4 3 2 1 0 + * ------------------------------------ + * Vibrator x x x x 1 x x x + * Alt LED x x x 1 x x x x + * Screen white 1 x x x x x x x + * Screen white x x 1 x x x x x + * Screen white x 0 x x x x x x + * Enable kbd dpad x x x x x x 0 x + * Happy Times 0 1 0 x x x 0 x + */ + +/* + * HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account + * for the 16 MPUIO lines. + */ +#define HTCPLD_GPIO_START_OFFSET (OMAP_MAX_GPIO_LINES + 16) +#define HTCPLD_IRQ(chip, offset) (OMAP_IRQ_END + 8 * (chip) + (offset)) +#define HTCPLD_BASE(chip, offset) \ + (HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset)) + +#define HTCPLD_GPIO_LED_DPAD HTCPLD_BASE(0, 0) +#define HTCPLD_GPIO_LED_KBD HTCPLD_BASE(1, 0) +#define HTCPLD_GPIO_LED_CAPS HTCPLD_BASE(1, 5) +#define HTCPLD_GPIO_LED_RED_FLASH HTCPLD_BASE(2, 1) +#define HTCPLD_GPIO_LED_RED_SOLID HTCPLD_BASE(2, 2) +#define HTCPLD_GPIO_LED_GREEN_FLASH HTCPLD_BASE(2, 3) +#define HTCPLD_GPIO_LED_GREEN_SOLID HTCPLD_BASE(2, 4) +#define HTCPLD_GPIO_LED_WIFI HTCPLD_BASE(2, 5) +#define HTCPLD_GPIO_LED_BT HTCPLD_BASE(2, 6) +#define HTCPLD_GPIO_LED_VIBRATE HTCPLD_BASE(3, 3) +#define HTCPLD_GPIO_LED_ALT HTCPLD_BASE(3, 4) + +#define HTCPLD_GPIO_RIGHT_KBD HTCPLD_BASE(6, 7) +#define HTCPLD_GPIO_UP_KBD HTCPLD_BASE(6, 6) +#define HTCPLD_GPIO_LEFT_KBD HTCPLD_BASE(6, 5) +#define HTCPLD_GPIO_DOWN_KBD HTCPLD_BASE(6, 4) + +#define HTCPLD_GPIO_RIGHT_DPAD HTCPLD_BASE(7, 7) +#define HTCPLD_GPIO_UP_DPAD HTCPLD_BASE(7, 6) +#define HTCPLD_GPIO_LEFT_DPAD HTCPLD_BASE(7, 5) +#define HTCPLD_GPIO_DOWN_DPAD HTCPLD_BASE(7, 4) +#define HTCPLD_GPIO_ENTER_DPAD HTCPLD_BASE(7, 3) + +/* + * The htcpld chip requires a gpio write to a specific line + * to re-enable interrupts after one has occurred. + */ +#define HTCPLD_GPIO_INT_RESET_HI HTCPLD_BASE(2, 7) +#define HTCPLD_GPIO_INT_RESET_LO HTCPLD_BASE(2, 0) + +/* Chip 5 */ +#define HTCPLD_IRQ_RIGHT_KBD HTCPLD_IRQ(0, 7) +#define HTCPLD_IRQ_UP_KBD HTCPLD_IRQ(0, 6) +#define HTCPLD_IRQ_LEFT_KBD HTCPLD_IRQ(0, 5) +#define HTCPLD_IRQ_DOWN_KBD HTCPLD_IRQ(0, 4) + +/* Chip 6 */ +#define HTCPLD_IRQ_RIGHT_DPAD HTCPLD_IRQ(1, 7) +#define HTCPLD_IRQ_UP_DPAD HTCPLD_IRQ(1, 6) +#define HTCPLD_IRQ_LEFT_DPAD HTCPLD_IRQ(1, 5) +#define HTCPLD_IRQ_DOWN_DPAD HTCPLD_IRQ(1, 4) +#define HTCPLD_IRQ_ENTER_DPAD HTCPLD_IRQ(1, 3) /* Keyboard definition */ @@ -140,6 +258,129 @@ static struct platform_device kp_device = { .resource = kp_resources, }; +/* GPIO buttons for keyboard slide and power button */ +static struct gpio_keys_button herald_gpio_keys_table[] = { + {BTN_0, HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20}, + {SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW, 1, 20}, + + {KEY_LEFT, HTCPLD_GPIO_LEFT_KBD, 1, "LEFT", EV_KEY, 1, 20}, + {KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20}, + {KEY_UP, HTCPLD_GPIO_UP_KBD, 1, "UP", EV_KEY, 1, 20}, + {KEY_DOWN, HTCPLD_GPIO_DOWN_KBD, 1, "DOWN", EV_KEY, 1, 20}, + + {KEY_LEFT, HTCPLD_GPIO_LEFT_DPAD, 1, "DLEFT", EV_KEY, 1, 20}, + {KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD, 1, "DRIGHT", EV_KEY, 1, 20}, + {KEY_UP, HTCPLD_GPIO_UP_DPAD, 1, "DUP", EV_KEY, 1, 20}, + {KEY_DOWN, HTCPLD_GPIO_DOWN_DPAD, 1, "DDOWN", EV_KEY, 1, 20}, + {KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD, 1, "DENTER", EV_KEY, 1, 20}, +}; + +static struct gpio_keys_platform_data herald_gpio_keys_data = { + .buttons = herald_gpio_keys_table, + .nbuttons = ARRAY_SIZE(herald_gpio_keys_table), + .rep = 1, +}; + +static struct platform_device herald_gpiokeys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &herald_gpio_keys_data, + }, +}; + +/* LEDs for the Herald. These connect to the HTCPLD GPIO device. */ +static struct gpio_led gpio_leds[] = { + {"dpad", NULL, HTCPLD_GPIO_LED_DPAD, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"kbd", NULL, HTCPLD_GPIO_LED_KBD, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"vibrate", NULL, HTCPLD_GPIO_LED_VIBRATE, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"red_solid", "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"red_flash", NULL, HTCPLD_GPIO_LED_RED_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"wifi", NULL, HTCPLD_GPIO_LED_WIFI, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"bt", NULL, HTCPLD_GPIO_LED_BT, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"caps", NULL, HTCPLD_GPIO_LED_CAPS, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"alt", NULL, HTCPLD_GPIO_LED_ALT, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, +}; + +static struct gpio_led_platform_data gpio_leds_data = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device gpio_leds_device = { + .name = "leds-gpio", + .id = 0, + .dev = { + .platform_data = &gpio_leds_data, + }, +}; + +/* HTC PLD chips */ + +static struct resource htcpld_resources[] = { + [0] = { + .start = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS), + .end = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS), + .flags = IORESOURCE_IRQ, + }, +}; + +struct htcpld_chip_platform_data htcpld_chips[] = { + [0] = { + .addr = 0x03, + .reset = 0x04, + .num_gpios = 8, + .gpio_out_base = HTCPLD_BASE(0, 0), + .gpio_in_base = HTCPLD_BASE(4, 0), + }, + [1] = { + .addr = 0x04, + .reset = 0x8e, + .num_gpios = 8, + .gpio_out_base = HTCPLD_BASE(1, 0), + .gpio_in_base = HTCPLD_BASE(5, 0), + }, + [2] = { + .addr = 0x05, + .reset = 0x80, + .num_gpios = 8, + .gpio_out_base = HTCPLD_BASE(2, 0), + .gpio_in_base = HTCPLD_BASE(6, 0), + .irq_base = HTCPLD_IRQ(0, 0), + .num_irqs = 8, + }, + [3] = { + .addr = 0x06, + .reset = 0x40, + .num_gpios = 8, + .gpio_out_base = HTCPLD_BASE(3, 0), + .gpio_in_base = HTCPLD_BASE(7, 0), + .irq_base = HTCPLD_IRQ(1, 0), + .num_irqs = 8, + }, +}; + +struct htcpld_core_platform_data htcpld_pfdata = { + .int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI, + .int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO, + .i2c_adapter_id = 1, + + .chip = htcpld_chips, + .num_chip = ARRAY_SIZE(htcpld_chips), +}; + +static struct platform_device htcpld_device = { + .name = "i2c-htcpld", + .id = -1, + .resource = htcpld_resources, + .num_resources = ARRAY_SIZE(htcpld_resources), + .dev = { + .platform_data = &htcpld_pfdata, + }, +}; + /* USB Device */ static struct omap_usb_config htcherald_usb_config __initdata = { .otg = 0, @@ -150,14 +391,71 @@ static struct omap_usb_config htcherald_usb_config __initdata = { }; /* LCD Device resources */ +static struct omap_lcd_config htcherald_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel htcherald_config[] __initdata = { + { OMAP_TAG_LCD, &htcherald_lcd_config }, +}; + static struct platform_device lcd_device = { .name = "lcd_htcherald", .id = -1, }; +/* MMC Card */ +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +static struct omap_mmc_platform_data htc_mmc1_data = { + .nr_slots = 1, + .switch_slot = NULL, + .slots[0] = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .name = "mmcblk", + .nomux = 1, + .wires = 4, + .switch_pin = -1, + }, +}; + +static struct omap_mmc_platform_data *htc_mmc_data[1]; +#endif + + +/* Platform devices for the Herald */ static struct platform_device *devices[] __initdata = { &kp_device, &lcd_device, + &htcpld_device, + &gpio_leds_device, + &herald_gpiokeys_device, +}; + +/* + * Touchscreen + */ +static const struct ads7846_platform_data htcherald_ts_platform_data = { + .model = 7846, + .keep_vref_on = 1, + .x_plate_ohms = 496, + .gpio_pendown = HTCHERALD_GPIO_TS, + .pressure_max = 100000, + .pressure_min = 5000, + .x_min = 528, + .x_max = 3760, + .y_min = 624, + .y_max = 3760, +}; + +static struct spi_board_info __initdata htcherald_spi_board_info[] = { + { + .modalias = "ads7846", + .platform_data = &htcherald_ts_platform_data, + .irq = OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS), + .max_speed_hz = 2500000, + .bus_num = 2, + .chip_select = 1, + } }; /* @@ -278,6 +576,7 @@ static void __init htcherald_init(void) { printk(KERN_INFO "HTC Herald init.\n"); + /* Do board initialization before we register all the devices */ omap_gpio_init(); omap_board_config = htcherald_config; @@ -288,6 +587,16 @@ static void __init htcherald_init(void) htcherald_usb_enable(); omap1_usb_init(&htcherald_usb_config); + + spi_register_board_info(htcherald_spi_board_info, + ARRAY_SIZE(htcherald_spi_board_info)); + + omap_register_i2c_bus(1, 100, NULL, 0); + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) + htc_mmc_data[0] = &htc_mmc1_data; + omap1_init_mmc(htc_mmc_data, 1); +#endif } static void __init htcherald_init_irq(void) diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index 5b33ae8..e8ddd86 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -44,8 +44,7 @@ static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 1, .slots[0] = { .set_power = mmc_set_power, - .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 | - MMC_VDD_32_33 | MMC_VDD_33_34, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .name = "mmcblk", }, }; diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index b583121..ea0d80a 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -9,6 +9,7 @@ * (at your option) any later version. */ +#include <linux/dma-mapping.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -192,6 +193,48 @@ static inline void omap_init_spi100k(void) } #endif + +#define OMAP1_CAMERA_BASE 0xfffb6800 +#define OMAP1_CAMERA_IOSIZE 0x1c + +static struct resource omap1_camera_resources[] = { + [0] = { + .start = OMAP1_CAMERA_BASE, + .end = OMAP1_CAMERA_BASE + OMAP1_CAMERA_IOSIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_CAMERA, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 omap1_camera_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device omap1_camera_device = { + .name = "omap1-camera", + .id = 0, /* This is used to put cameras on this interface */ + .dev = { + .dma_mask = &omap1_camera_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(omap1_camera_resources), + .resource = omap1_camera_resources, +}; + +void __init omap1_camera_init(void *info) +{ + struct platform_device *dev = &omap1_camera_device; + int ret; + + dev->dev.platform_data = info; + + ret = platform_device_register(dev); + if (ret) + dev_err(&dev->dev, "unable to register device: %d\n", ret); +} + + /*-------------------------------------------------------------------------*/ static inline void omap_init_sti(void) {} @@ -258,3 +301,30 @@ static int __init omap1_init_devices(void) } arch_initcall(omap1_init_devices); +#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) + +static struct resource wdt_resources[] = { + { + .start = 0xfffeb000, + .end = 0xfffeb07F, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_wdt_device = { + .name = "omap_wdt", + .id = -1, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static int __init omap_init_wdt(void) +{ + if (!cpu_is_omap16xx()) + return; + + platform_device_register(&omap_wdt_device); + return 0; +} +subsys_initcall(omap_init_wdt); +#endif diff --git a/arch/arm/mach-omap1/include/mach/camera.h b/arch/arm/mach-omap1/include/mach/camera.h new file mode 100644 index 0000000..fd54b45 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/camera.h @@ -0,0 +1,11 @@ +#ifndef __ASM_ARCH_CAMERA_H_ +#define __ASM_ARCH_CAMERA_H_ + +void omap1_camera_init(void *); + +static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info) +{ + omap1_camera_init(info); +} + +#endif /* __ASM_ARCH_CAMERA_H_ */ diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c new file mode 100644 index 0000000..8b66392 --- /dev/null +++ b/arch/arm/mach-omap1/pm_bus.c @@ -0,0 +1,98 @@ +/* + * Runtime PM support code for OMAP1 + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * Copyright (C) 2010 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/pm_runtime.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <plat/omap_device.h> +#include <plat/omap-pm.h> + +#ifdef CONFIG_PM_RUNTIME +static int omap1_pm_runtime_suspend(struct device *dev) +{ + struct clk *iclk, *fclk; + int ret = 0; + + dev_dbg(dev, "%s\n", __func__); + + ret = pm_generic_runtime_suspend(dev); + + fclk = clk_get(dev, "fck"); + if (!IS_ERR(fclk)) { + clk_disable(fclk); + clk_put(fclk); + } + + iclk = clk_get(dev, "ick"); + if (!IS_ERR(iclk)) { + clk_disable(iclk); + clk_put(iclk); + } + + return 0; +}; + +static int omap1_pm_runtime_resume(struct device *dev) +{ + int ret = 0; + struct clk *iclk, *fclk; + + dev_dbg(dev, "%s\n", __func__); + + iclk = clk_get(dev, "ick"); + if (!IS_ERR(iclk)) { + clk_enable(iclk); + clk_put(iclk); + } + + fclk = clk_get(dev, "fck"); + if (!IS_ERR(fclk)) { + clk_enable(fclk); + clk_put(fclk); + } + + return pm_generic_runtime_resume(dev); +}; + +static int __init omap1_pm_runtime_init(void) +{ + const struct dev_pm_ops *pm; + struct dev_pm_ops *omap_pm; + + pm = platform_bus_get_pm_ops(); + if (!pm) { + pr_err("%s: unable to get dev_pm_ops from platform_bus\n", + __func__); + return -ENODEV; + } + + omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL); + if (!omap_pm) { + pr_err("%s: unable to alloc memory for new dev_pm_ops\n", + __func__); + return -ENOMEM; + } + + omap_pm->runtime_suspend = omap1_pm_runtime_suspend; + omap_pm->runtime_resume = omap1_pm_runtime_resume; + + platform_bus_set_pm_ops(omap_pm); + + return 0; +} +core_initcall(omap1_pm_runtime_init); +#endif /* CONFIG_PM_RUNTIME */ |
