summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap1/include/mach/debug-macro.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap1/include/mach/debug-macro.S')
-rw-r--r--arch/arm/mach-omap1/include/mach/debug-macro.S68
1 files changed, 35 insertions, 33 deletions
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 671408e..6a0fa04 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -28,56 +28,58 @@ omap_uart_virt: .word 0x0
* the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above.
*/
- .macro addruart, rx, tmp
+ .macro addruart, rp, rv
/* Use omap_uart_phys/virt if already configured */
-9: mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =__virt_to_phys(omap_uart_phys) @ physical base address
- ldrne \rx, =omap_uart_virt @ virtual base
- ldr \rx, [\rx, #0]
- cmp \rx, #0 @ is port configured?
+9: mrc p15, 0, \rp, c1, c0
+ tst \rp, #1 @ MMU enabled?
+ ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
+ ldrne \rp, =omap_uart_phys @ MMU enabled
+ add \rv, \rp, #4 @ omap_uart_virt
+ ldr \rp, [\rp, #0]
+ ldr \rv, [\rv, #0]
+ cmp \rp, #0 @ is port configured?
+ cmpne \rv, #0
bne 99f @ already configured
/* Check the debug UART configuration set in uncompress.h */
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =OMAP_UART_INFO
- ldrne \rx, =__phys_to_virt(OMAP_UART_INFO)
- ldr \rx, [\rx, #0]
+ mrc p15, 0, \rp, c1, c0
+ tst \rp, #1 @ MMU enabled?
+ ldreq \rp, =OMAP_UART_INFO @ MMU not enabled
+ ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled
+ ldr \rp, [\rp, #0]
/* Select the UART to use based on the UART1 scratchpad value */
-10: cmp \rx, #0 @ no port configured?
+10: cmp \rp, #0 @ no port configured?
beq 11f @ if none, try to use UART1
- cmp \rx, #OMAP1UART1
+ cmp \rp, #OMAP1UART1
beq 11f @ configure OMAP1UART1
- cmp \rx, #OMAP1UART2
+ cmp \rp, #OMAP1UART2
beq 12f @ configure OMAP1UART2
- cmp \rx, #OMAP1UART3
+ cmp \rp, #OMAP1UART3
beq 13f @ configure OMAP2UART3
/* Configure the UART offset from the phys/virt base */
-11: mov \rx, #0x00fb0000 @ OMAP1UART1
+11: mov \rp, #0x00fb0000 @ OMAP1UART1
b 98f
-12: mov \rx, #0x00fb0000 @ OMAP1UART1
- orr \rx, \rx, #0x00000800 @ OMAP1UART2
+12: mov \rp, #0x00fb0000 @ OMAP1UART1
+ orr \rp, \rp, #0x00000800 @ OMAP1UART2
b 98f
-13: mov \rx, #0x00fb0000 @ OMAP1UART1
- orr \rx, \rx, #0x00000800 @ OMAP1UART2
- orr \rx, \rx, #0x00009000 @ OMAP1UART3
+13: mov \rp, #0x00fb0000 @ OMAP1UART1
+ orr \rp, \rp, #0x00000800 @ OMAP1UART2
+ orr \rp, \rp, #0x00009000 @ OMAP1UART3
/* Store both phys and virt address for the uart */
-98: add \rx, \rx, #0xff000000 @ phys base
- mrc p15, 0, \tmp, c1, c0
- tst \tmp, #1 @ MMU enabled?
- ldreq \tmp, =__virt_to_phys(omap_uart_phys)
- ldrne \tmp, =omap_uart_phys
- str \rx, [\tmp, #0]
- sub \rx, \rx, #0xff000000 @ phys base
- add \rx, \rx, #0xfe000000 @ virt base
- ldreq \tmp, =__virt_to_phys(omap_uart_virt)
- ldrne \tmp, =omap_uart_virt
- str \rx, [\tmp, #0]
+98: add \rp, \rp, #0xff000000 @ phys base
+ mrc p15, 0, \rv, c1, c0
+ tst \rv, #1 @ MMU enabled?
+ ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
+ ldrne \rv, =omap_uart_phys @ MMU enabled
+ str \rp, [\rv, #0]
+ sub \rp, \rp, #0xff000000 @ phys base
+ add \rp, \rp, #0xfe000000 @ virt base
+ add \rv, \rv, #4 @ omap_uart_lsr
+ str \rp, [\rv, #0]
b 9b
99:
.endm
OpenPOWER on IntegriCloud