summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-mx5/mx51_efika.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-mx5/mx51_efika.c')
-rw-r--r--arch/arm/mach-mx5/mx51_efika.c636
1 files changed, 636 insertions, 0 deletions
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
new file mode 100644
index 0000000..51a67fc
--- /dev/null
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -0,0 +1,636 @@
+/*
+ * based on code from the following
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
+ * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/fsl_devices.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/mc13892.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx51.h>
+#include <mach/i2c.h>
+#include <mach/mxc_ehci.h>
+
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <mach/ulpi.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+#include "efika.h"
+#include "cpu_op-mx51.h"
+
+#define MX51_USB_CTRL_1_OFFSET 0x10
+#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
+#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
+
+#define EFIKAMX_USB_HUB_RESET IMX_GPIO_NR(1, 5)
+#define EFIKAMX_USBH1_STP IMX_GPIO_NR(1, 27)
+
+#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24)
+#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25)
+
+#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6)
+
+static iomux_v3_cfg_t mx51efika_pads[] = {
+ /* UART1 */
+ MX51_PAD_UART1_RXD__UART1_RXD,
+ MX51_PAD_UART1_TXD__UART1_TXD,
+ MX51_PAD_UART1_RTS__UART1_RTS,
+ MX51_PAD_UART1_CTS__UART1_CTS,
+
+ /* SD 1 */
+ MX51_PAD_SD1_CMD__SD1_CMD,
+ MX51_PAD_SD1_CLK__SD1_CLK,
+ MX51_PAD_SD1_DATA0__SD1_DATA0,
+ MX51_PAD_SD1_DATA1__SD1_DATA1,
+ MX51_PAD_SD1_DATA2__SD1_DATA2,
+ MX51_PAD_SD1_DATA3__SD1_DATA3,
+
+ /* SD 2 */
+ MX51_PAD_SD2_CMD__SD2_CMD,
+ MX51_PAD_SD2_CLK__SD2_CLK,
+ MX51_PAD_SD2_DATA0__SD2_DATA0,
+ MX51_PAD_SD2_DATA1__SD2_DATA1,
+ MX51_PAD_SD2_DATA2__SD2_DATA2,
+ MX51_PAD_SD2_DATA3__SD2_DATA3,
+
+ /* SD/MMC WP/CD */
+ MX51_PAD_GPIO1_0__SD1_CD,
+ MX51_PAD_GPIO1_1__SD1_WP,
+ MX51_PAD_GPIO1_7__SD2_WP,
+ MX51_PAD_GPIO1_8__SD2_CD,
+
+ /* spi */
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
+ MX51_PAD_CSPI1_SS0__GPIO4_24,
+ MX51_PAD_CSPI1_SS1__GPIO4_25,
+ MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
+ MX51_PAD_GPIO1_6__GPIO1_6,
+
+ /* USB HOST1 */
+ MX51_PAD_USBH1_CLK__USBH1_CLK,
+ MX51_PAD_USBH1_DIR__USBH1_DIR,
+ MX51_PAD_USBH1_NXT__USBH1_NXT,
+ MX51_PAD_USBH1_DATA0__USBH1_DATA0,
+ MX51_PAD_USBH1_DATA1__USBH1_DATA1,
+ MX51_PAD_USBH1_DATA2__USBH1_DATA2,
+ MX51_PAD_USBH1_DATA3__USBH1_DATA3,
+ MX51_PAD_USBH1_DATA4__USBH1_DATA4,
+ MX51_PAD_USBH1_DATA5__USBH1_DATA5,
+ MX51_PAD_USBH1_DATA6__USBH1_DATA6,
+ MX51_PAD_USBH1_DATA7__USBH1_DATA7,
+
+ /* USB HUB RESET */
+ MX51_PAD_GPIO1_5__GPIO1_5,
+
+ /* WLAN */
+ MX51_PAD_EIM_A22__GPIO2_16,
+ MX51_PAD_EIM_A16__GPIO2_10,
+
+ /* USB PHY RESET */
+ MX51_PAD_EIM_D27__GPIO2_9,
+};
+
+/* Serial ports */
+static const struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* This function is board specific as the bit mask for the plldiv will also
+ * be different for other Freescale SoCs, thus a common bitmask is not
+ * possible and cannot get place in /plat-mxc/ehci.c.
+ */
+static int initialize_otg_port(struct platform_device *pdev)
+{
+ u32 v;
+ void __iomem *usb_base;
+ void __iomem *usbother_base;
+ usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ if (!usb_base)
+ return -ENOMEM;
+ usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
+
+ /* Set the PHY clock to 19.2MHz */
+ v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+ v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+ v |= MX51_USB_PLL_DIV_19_2_MHZ;
+ __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+ iounmap(usb_base);
+
+ mdelay(10);
+
+ return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
+}
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+ .init = initialize_otg_port,
+ .portsc = MXC_EHCI_UTMI_16BIT,
+};
+
+static int initialize_usbh1_port(struct platform_device *pdev)
+{
+ iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
+ iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27;
+ u32 v;
+ void __iomem *usb_base;
+ void __iomem *socregs_base;
+
+ mxc_iomux_v3_setup_pad(usbh1gpio);
+ gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp");
+ gpio_direction_output(EFIKAMX_USBH1_STP, 0);
+ msleep(1);
+ gpio_set_value(EFIKAMX_USBH1_STP, 1);
+ msleep(1);
+
+ usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
+
+ /* The clock for the USBH1 ULPI port will come externally */
+ /* from the PHY. */
+ v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET);
+ __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
+ socregs_base + MX51_USB_CTRL_1_OFFSET);
+
+ iounmap(usb_base);
+
+ gpio_free(EFIKAMX_USBH1_STP);
+ mxc_iomux_v3_setup_pad(usbh1stp);
+
+ mdelay(10);
+
+ return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD);
+}
+
+static struct mxc_usbh_platform_data usbh1_config = {
+ .init = initialize_usbh1_port,
+ .portsc = MXC_EHCI_MODE_ULPI,
+};
+
+static void mx51_efika_hubreset(void)
+{
+ gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst");
+ gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1);
+ msleep(1);
+ gpio_set_value(EFIKAMX_USB_HUB_RESET, 0);
+ msleep(1);
+ gpio_set_value(EFIKAMX_USB_HUB_RESET, 1);
+}
+
+static void __init mx51_efika_usb(void)
+{
+ mx51_efika_hubreset();
+
+ /* pulling it low, means no USB at all... */
+ gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset");
+ gpio_direction_output(EFIKA_USB_PHY_RESET, 0);
+ msleep(1);
+ gpio_set_value(EFIKA_USB_PHY_RESET, 1);
+
+ usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
+
+ mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ if (usbh1_config.otg)
+ mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+}
+
+static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_256K,
+ },
+ {
+ .name = "config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_64K,
+ },
+};
+
+static struct flash_platform_data mx51_efika_spi_flash_data = {
+ .name = "spi_flash",
+ .parts = mx51_efika_spi_nor_partitions,
+ .nr_parts = ARRAY_SIZE(mx51_efika_spi_nor_partitions),
+ .type = "sst25vf032b",
+};
+
+static struct regulator_consumer_supply sw1_consumers[] = {
+ {
+ .supply = "cpu_vcc",
+ }
+};
+
+static struct regulator_consumer_supply vdig_consumers[] = {
+ /* sgtl5000 */
+ REGULATOR_SUPPLY("VDDA", "1-000a"),
+ REGULATOR_SUPPLY("VDDD", "1-000a"),
+};
+
+static struct regulator_consumer_supply vvideo_consumers[] = {
+ /* sgtl5000 */
+ REGULATOR_SUPPLY("VDDIO", "1-000a"),
+};
+
+static struct regulator_consumer_supply vsd_consumers[] = {
+ REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.0"),
+ REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.1"),
+};
+
+static struct regulator_consumer_supply pwgt1_consumer[] = {
+ {
+ .supply = "pwgt1",
+ }
+};
+
+static struct regulator_consumer_supply pwgt2_consumer[] = {
+ {
+ .supply = "pwgt2",
+ }
+};
+
+static struct regulator_consumer_supply coincell_consumer[] = {
+ {
+ .supply = "coincell",
+ }
+};
+
+static struct regulator_init_data sw1_init = {
+ .constraints = {
+ .name = "SW1",
+ .min_uV = 600000,
+ .max_uV = 1375000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .valid_modes_mask = 0,
+ .always_on = 1,
+ .boot_on = 1,
+ .state_mem = {
+ .uV = 850000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
+ .consumer_supplies = sw1_consumers,
+};
+
+static struct regulator_init_data sw2_init = {
+ .constraints = {
+ .name = "SW2",
+ .min_uV = 900000,
+ .max_uV = 1850000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .boot_on = 1,
+ .state_mem = {
+ .uV = 950000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ }
+};
+
+static struct regulator_init_data sw3_init = {
+ .constraints = {
+ .name = "SW3",
+ .min_uV = 1100000,
+ .max_uV = 1850000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data sw4_init = {
+ .constraints = {
+ .name = "SW4",
+ .min_uV = 1100000,
+ .max_uV = 1850000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data viohi_init = {
+ .constraints = {
+ .name = "VIOHI",
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
+static struct regulator_init_data vusb_init = {
+ .constraints = {
+ .name = "VUSB",
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
+static struct regulator_init_data swbst_init = {
+ .constraints = {
+ .name = "SWBST",
+ }
+};
+
+static struct regulator_init_data vdig_init = {
+ .constraints = {
+ .name = "VDIG",
+ .min_uV = 1050000,
+ .max_uV = 1800000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vdig_consumers),
+ .consumer_supplies = vdig_consumers,
+};
+
+static struct regulator_init_data vpll_init = {
+ .constraints = {
+ .name = "VPLL",
+ .min_uV = 1050000,
+ .max_uV = 1800000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
+static struct regulator_init_data vusb2_init = {
+ .constraints = {
+ .name = "VUSB2",
+ .min_uV = 2400000,
+ .max_uV = 2775000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
+static struct regulator_init_data vvideo_init = {
+ .constraints = {
+ .name = "VVIDEO",
+ .min_uV = 2775000,
+ .max_uV = 2775000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .apply_uV = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vvideo_consumers),
+ .consumer_supplies = vvideo_consumers,
+};
+
+static struct regulator_init_data vaudio_init = {
+ .constraints = {
+ .name = "VAUDIO",
+ .min_uV = 2300000,
+ .max_uV = 3000000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data vsd_init = {
+ .constraints = {
+ .name = "VSD",
+ .min_uV = 1800000,
+ .max_uV = 3150000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vsd_consumers),
+ .consumer_supplies = vsd_consumers,
+};
+
+static struct regulator_init_data vcam_init = {
+ .constraints = {
+ .name = "VCAM",
+ .min_uV = 2500000,
+ .max_uV = 3000000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data vgen1_init = {
+ .constraints = {
+ .name = "VGEN1",
+ .min_uV = 1200000,
+ .max_uV = 3150000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
+static struct regulator_init_data vgen2_init = {
+ .constraints = {
+ .name = "VGEN2",
+ .min_uV = 1200000,
+ .max_uV = 3150000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
+static struct regulator_init_data vgen3_init = {
+ .constraints = {
+ .name = "VGEN3",
+ .min_uV = 1800000,
+ .max_uV = 2900000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
+static struct regulator_init_data gpo1_init = {
+ .constraints = {
+ .name = "GPO1",
+ }
+};
+
+static struct regulator_init_data gpo2_init = {
+ .constraints = {
+ .name = "GPO2",
+ }
+};
+
+static struct regulator_init_data gpo3_init = {
+ .constraints = {
+ .name = "GPO3",
+ }
+};
+
+static struct regulator_init_data gpo4_init = {
+ .constraints = {
+ .name = "GPO4",
+ }
+};
+
+static struct regulator_init_data pwgt1_init = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer),
+ .consumer_supplies = pwgt1_consumer,
+};
+
+static struct regulator_init_data pwgt2_init = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer),
+ .consumer_supplies = pwgt2_consumer,
+};
+
+static struct regulator_init_data vcoincell_init = {
+ .constraints = {
+ .name = "COINCELL",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(coincell_consumer),
+ .consumer_supplies = coincell_consumer,
+};
+
+static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
+ { .id = MC13892_SW1, .init_data = &sw1_init },
+ { .id = MC13892_SW2, .init_data = &sw2_init },
+ { .id = MC13892_SW3, .init_data = &sw3_init },
+ { .id = MC13892_SW4, .init_data = &sw4_init },
+ { .id = MC13892_SWBST, .init_data = &swbst_init },
+ { .id = MC13892_VIOHI, .init_data = &viohi_init },
+ { .id = MC13892_VPLL, .init_data = &vpll_init },
+ { .id = MC13892_VDIG, .init_data = &vdig_init },
+ { .id = MC13892_VSD, .init_data = &vsd_init },
+ { .id = MC13892_VUSB2, .init_data = &vusb2_init },
+ { .id = MC13892_VVIDEO, .init_data = &vvideo_init },
+ { .id = MC13892_VAUDIO, .init_data = &vaudio_init },
+ { .id = MC13892_VCAM, .init_data = &vcam_init },
+ { .id = MC13892_VGEN1, .init_data = &vgen1_init },
+ { .id = MC13892_VGEN2, .init_data = &vgen2_init },
+ { .id = MC13892_VGEN3, .init_data = &vgen3_init },
+ { .id = MC13892_VUSB, .init_data = &vusb_init },
+ { .id = MC13892_GPO1, .init_data = &gpo1_init },
+ { .id = MC13892_GPO2, .init_data = &gpo2_init },
+ { .id = MC13892_GPO3, .init_data = &gpo3_init },
+ { .id = MC13892_GPO4, .init_data = &gpo4_init },
+ { .id = MC13892_PWGT1SPI, .init_data = &pwgt1_init },
+ { .id = MC13892_PWGT2SPI, .init_data = &pwgt2_init },
+ { .id = MC13892_VCOINCELL, .init_data = &vcoincell_init },
+};
+
+static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
+ .flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR,
+ .num_regulators = ARRAY_SIZE(mx51_efika_regulators),
+ .regulators = mx51_efika_regulators,
+};
+
+static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
+ {
+ .modalias = "m25p80",
+ .max_speed_hz = 25000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .platform_data = &mx51_efika_spi_flash_data,
+ .irq = -1,
+ },
+ {
+ .modalias = "mc13892",
+ .max_speed_hz = 1000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = &mx51_efika_mc13892_data,
+ .irq = gpio_to_irq(EFIKAMX_PMIC),
+ },
+};
+
+static int mx51_efika_spi_cs[] = {
+ EFIKAMX_SPI_CS0,
+ EFIKAMX_SPI_CS1,
+};
+
+static const struct spi_imx_master mx51_efika_spi_pdata __initconst = {
+ .chipselect = mx51_efika_spi_cs,
+ .num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs),
+};
+
+void __init efika_board_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx51efika_pads,
+ ARRAY_SIZE(mx51efika_pads));
+ imx51_add_imx_uart(0, &uart_pdata);
+ mx51_efika_usb();
+ imx51_add_sdhci_esdhc_imx(0, NULL);
+
+ /* FIXME: comes from original code. check this. */
+ if (mx51_revision() < IMX_CHIP_REVISION_2_0)
+ sw2_init.constraints.state_mem.uV = 1100000;
+ else if (mx51_revision() == IMX_CHIP_REVISION_2_0) {
+ sw2_init.constraints.state_mem.uV = 1250000;
+ sw1_init.constraints.state_mem.uV = 1000000;
+ }
+ if (machine_is_mx51_efikasb())
+ vgen1_init.constraints.max_uV = 1200000;
+
+ gpio_request(EFIKAMX_PMIC, "pmic irq");
+ gpio_direction_input(EFIKAMX_PMIC);
+ spi_register_board_info(mx51_efika_spi_board_info,
+ ARRAY_SIZE(mx51_efika_spi_board_info));
+ imx51_add_ecspi(0, &mx51_efika_spi_pdata);
+
+#if defined(CONFIG_CPU_FREQ_IMX)
+ get_cpu_op = mx51_get_cpu_op;
+#endif
+}
+
OpenPOWER on IntegriCloud