diff options
Diffstat (limited to 'arch/arm/mach-mx5/board-mx51_babbage.c')
| -rw-r--r-- | arch/arm/mach-mx5/board-mx51_babbage.c | 119 |
1 files changed, 100 insertions, 19 deletions
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 6e384d9..acbe30d 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> * * The code contained herein is licensed under the GNU General Public @@ -17,12 +17,13 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/fsl_devices.h> +#include <linux/fec.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx51.h> -#include <mach/i2c.h> #include <mach/mxc_ehci.h> #include <asm/irq.h> @@ -31,11 +32,15 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "devices-imx51.h" #include "devices.h" +#include "cpu_op-mx51.h" #define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */ #define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */ -#define BABBAGE_PHY_RESET (1*32 +5) /* GPIO_2_5 */ +#define BABBAGE_PHY_RESET (1*32 + 5) /* GPIO_2_5 */ +#define BABBAGE_FEC_PHY_RESET (1*32 + 14) /* GPIO_2_14 */ +#define BABBAGE_POWER_KEY (1*32 + 21) /* GPIO_2_21 */ /* USB_CTRL_1 */ #define MX51_USB_CTRL_1_OFFSET 0x10 @@ -45,8 +50,19 @@ #define MX51_USB_PLL_DIV_19_2_MHZ 0x01 #define MX51_USB_PLL_DIV_24_MHZ 0x02 -static struct platform_device *devices[] __initdata = { - &mxc_fec_device, +static struct gpio_keys_button babbage_buttons[] = { + { + .gpio = BABBAGE_POWER_KEY, + .code = BTN_0, + .desc = "PWR", + .active_low = 1, + .wakeup = 1, + }, +}; + +static const struct gpio_keys_platform_data imx_button_data __initconst = { + .buttons = babbage_buttons, + .nbuttons = ARRAY_SIZE(babbage_buttons), }; static struct pad_desc mx51babbage_pads[] = { @@ -93,19 +109,57 @@ static struct pad_desc mx51babbage_pads[] = { /* USB HUB reset line*/ MX51_PAD_GPIO_1_7__GPIO_1_7, + + /* FEC */ + MX51_PAD_EIM_EB2__FEC_MDIO, + MX51_PAD_EIM_EB3__FEC_RDAT1, + MX51_PAD_EIM_CS2__FEC_RDAT2, + MX51_PAD_EIM_CS3__FEC_RDAT3, + MX51_PAD_EIM_CS4__FEC_RX_ER, + MX51_PAD_EIM_CS5__FEC_CRS, + MX51_PAD_NANDF_RB2__FEC_COL, + MX51_PAD_NANDF_RB3__FEC_RXCLK, + MX51_PAD_NANDF_RB6__FEC_RDAT0, + MX51_PAD_NANDF_RB7__FEC_TDAT0, + MX51_PAD_NANDF_CS2__FEC_TX_ER, + MX51_PAD_NANDF_CS3__FEC_MDC, + MX51_PAD_NANDF_CS4__FEC_TDAT1, + MX51_PAD_NANDF_CS5__FEC_TDAT2, + MX51_PAD_NANDF_CS6__FEC_TDAT3, + MX51_PAD_NANDF_CS7__FEC_TX_EN, + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK, + + /* FEC PHY reset line */ + MX51_PAD_EIM_A20__GPIO_2_14, + + /* SD 1 */ + MX51_PAD_SD1_CMD__SD1_CMD, + MX51_PAD_SD1_CLK__SD1_CLK, + MX51_PAD_SD1_DATA0__SD1_DATA0, + MX51_PAD_SD1_DATA1__SD1_DATA1, + MX51_PAD_SD1_DATA2__SD1_DATA2, + MX51_PAD_SD1_DATA3__SD1_DATA3, + + /* SD 2 */ + MX51_PAD_SD2_CMD__SD2_CMD, + MX51_PAD_SD2_CLK__SD2_CLK, + MX51_PAD_SD2_DATA0__SD2_DATA0, + MX51_PAD_SD2_DATA1__SD2_DATA1, + MX51_PAD_SD2_DATA2__SD2_DATA2, + MX51_PAD_SD2_DATA3__SD2_DATA3, }; /* Serial ports */ #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; static inline void mxc_init_imx_uart(void) { - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); } #else /* !SERIAL_IMX */ static inline void mxc_init_imx_uart(void) @@ -113,7 +167,7 @@ static inline void mxc_init_imx_uart(void) } #endif /* SERIAL_IMX */ -static struct imxi2c_platform_data babbage_i2c_data = { +static const struct imxi2c_platform_data babbage_i2c_data __initconst = { .bitrate = 100000, }; @@ -171,6 +225,22 @@ static inline void babbage_usbhub_reset(void) gpio_set_value(BABBAGE_USB_HUB_RESET, 1); } +static inline void babbage_fec_reset(void) +{ + int ret; + + /* reset FEC PHY */ + ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset"); + if (ret) { + printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); + return; + } + gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0); + gpio_set_value(BABBAGE_FEC_PHY_RESET, 0); + msleep(1); + gpio_set_value(BABBAGE_FEC_PHY_RESET, 1); +} + /* This function is board specific as the bit mask for the plldiv will also be different for other Freescale SoCs, thus a common bitmask is not possible and cannot get place in /plat-mxc/ehci.c.*/ @@ -178,7 +248,7 @@ static int initialize_otg_port(struct platform_device *pdev) { u32 v; void __iomem *usb_base; - u32 usbother_base; + void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; @@ -196,7 +266,7 @@ static int initialize_usbh1_port(struct platform_device *pdev) { u32 v; void __iomem *usb_base; - u32 usbother_base; + void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; @@ -246,14 +316,24 @@ __setup("otg_mode=", babbage_otg_mode); static void __init mxc_board_init(void) { struct pad_desc usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; + struct pad_desc power_key = MX51_PAD_EIM_A27__GPIO_2_21; +#if defined(CONFIG_CPU_FREQ_IMX) + get_cpu_op = mx51_get_cpu_op; +#endif mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, ARRAY_SIZE(mx51babbage_pads)); mxc_init_imx_uart(); - platform_add_devices(devices, ARRAY_SIZE(devices)); + babbage_fec_reset(); + imx51_add_fec(NULL); + + /* Set the PAD settings for the pwr key. */ + power_key.pad_ctrl = MX51_GPIO_PAD_CTRL_2; + mxc_iomux_v3_setup_pad(&power_key); + imx51_add_gpio_keys(&imx_button_data); - mxc_register_device(&mxc_i2c_device0, &babbage_i2c_data); - mxc_register_device(&mxc_i2c_device1, &babbage_i2c_data); + imx51_add_imx_i2c(0, &babbage_i2c_data); + imx51_add_imx_i2c(1, &babbage_i2c_data); mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data); if (otg_mode_host) @@ -268,6 +348,9 @@ static void __init mxc_board_init(void) /* setback USBH1_STP to be function */ mxc_iomux_v3_setup_pad(&usbh1stp); babbage_usbhub_reset(); + + imx51_add_esdhc(0, NULL); + imx51_add_esdhc(1, NULL); } static void __init mx51_babbage_timer_init(void) @@ -281,9 +364,7 @@ static struct sys_timer mxc_timer = { MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */ - .phys_io = MX51_AIPS1_BASE_ADDR, - .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, .init_irq = mx51_init_irq, .init_machine = mxc_board_init, |
