summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-msm/include/mach/entry-macro-qgic.S')
-rw-r--r--arch/arm/mach-msm/include/mach/entry-macro-qgic.S73
1 files changed, 1 insertions, 72 deletions
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
index 1246715..717076f 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
@@ -8,81 +8,10 @@
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <asm/hardware/gic.h>
+#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =gic_cpu_base_addr
- ldr \base, [\base]
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- /*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Migrated the code from ARM MP port to be more consistent
- * with interrupt processing , the following still holds true
- * however, all interrupts are treated the same regardless of
- * if they are local IPI or PPI
- *
- * Interrupts 0-15 are IPI
- * 16-31 are PPI
- * (16-18 are the timers)
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * A simple read from the controller will tell us the number of the
- * highest priority enabled interrupt. We then just need to check
- * whether it is in the valid range for an IRQ (0-1020 inclusive).
- *
- * Base ARM code assumes that the local (private) peripheral interrupts
- * are not valid, we treat them differently, in that the privates are
- * handled like normal shared interrupts with the exception that only
- * one processor can register the interrupt and the handler must be
- * the same for all processors.
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 =srcCPU,
- 9-0 =int # */
-
- bic \irqnr, \irqstat, #0x1c00 @mask src
- cmp \irqnr, #15
- ldr \tmp, =1021
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
-
- .endm
-
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm
-
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #16
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
OpenPOWER on IntegriCloud