1 files changed, 120 insertions, 0 deletions
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
new file mode 100644
index 0000000..bac1f3c
--- /dev/null
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -0,0 +1,120 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+
+#include <mach/gpio.h>
+#include <mach/board.h>
+#include <mach/memory.h>
+#include <mach/msm_iomap.h>
+#include <mach/dma.h>
+
+#include <mach/vreg.h>
+#include "devices.h"
+#include "proc_comm.h"
+
+extern struct sys_timer msm_timer;
+
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+static struct msm_gpio uart2_config_data[] = {
+	{ GPIO_CFG(49, 2, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_RFR"},
+	{ GPIO_CFG(50, 2, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_CTS"},
+	{ GPIO_CFG(51, 2, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"},
+	{ GPIO_CFG(52, 2, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"},
+};
+
+static void msm7x30_init_uart2(void)
+{
+	msm_gpios_request_enable(uart2_config_data,
+			ARRAY_SIZE(uart2_config_data));
+
+}
+#endif
+
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
+        &msm_device_uart2,
+#endif
+
+};
+
+static void __init msm7x30_init_irq(void)
+{
+	msm_init_irq();
+}
+
+static void __init msm7x30_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+	msm7x30_init_uart2();
+#endif
+
+}
+
+static void __init msm7x30_map_io(void)
+{
+	msm_map_msm7x30_io();
+	msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
+}
+
+MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io  = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = msm7x30_map_io,
+	.init_irq = msm7x30_init_irq,
+	.init_machine = msm7x30_init,
+	.timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io  = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = msm7x30_map_io,
+	.init_irq = msm7x30_init_irq,
+	.init_machine = msm7x30_init,
+	.timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io  = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = msm7x30_map_io,
+	.init_irq = msm7x30_init_irq,
+	.init_machine = msm7x30_init,
+	.timer = &msm_timer,
+MACHINE_END