diff options
Diffstat (limited to 'arch/arm/mach-ixp2000')
-rw-r--r-- | arch/arm/mach-ixp2000/Kconfig | 59 | ||||
-rw-r--r-- | arch/arm/mach-ixp2000/Makefile | 14 | ||||
-rw-r--r-- | arch/arm/mach-ixp2000/Makefile.boot | 3 | ||||
-rw-r--r-- | arch/arm/mach-ixp2000/core.c | 390 | ||||
-rw-r--r-- | arch/arm/mach-ixp2000/enp2611.c | 220 | ||||
-rw-r--r-- | arch/arm/mach-ixp2000/ixdp2400.c | 179 | ||||
-rw-r--r-- | arch/arm/mach-ixp2000/ixdp2800.c | 180 | ||||
-rw-r--r-- | arch/arm/mach-ixp2000/ixdp2x00.c | 304 | ||||
-rw-r--r-- | arch/arm/mach-ixp2000/ixdp2x01.c | 400 | ||||
-rw-r--r-- | arch/arm/mach-ixp2000/pci.c | 235 |
10 files changed, 1984 insertions, 0 deletions
diff --git a/arch/arm/mach-ixp2000/Kconfig b/arch/arm/mach-ixp2000/Kconfig new file mode 100644 index 0000000..9361e05 --- /dev/null +++ b/arch/arm/mach-ixp2000/Kconfig @@ -0,0 +1,59 @@ + +if ARCH_IXP2000 + +config ARCH_SUPPORTS_BIG_ENDIAN + bool + default y + +menu "Intel IXP2400/2800 Implementation Options" + +comment "IXP2400/2800 Platforms" + +config ARCH_ENP2611 + bool "Support Radisys ENP-2611" + help + Say 'Y' here if you want your kernel to support the Radisys + ENP2611 PCI network processing card. For more information on + this card, see <file:Documentation/arm/ENP2611>. + +config ARCH_IXDP2400 + bool "Support Intel IXDP2400" + help + Say 'Y' here if you want your kernel to support the Intel + IXDP2400 reference platform. For more information on + this platform, see <file:Documentation/arm/IXP2000>. + +config ARCH_IXDP2800 + bool "Support Intel IXDP2800" + help + Say 'Y' here if you want your kernel to support the Intel + IXDP2800 reference platform. For more information on + this platform, see <file:Documentation/arm/IXP2000>. + +config ARCH_IXDP2X00 + bool + depends on ARCH_IXDP2400 || ARCH_IXDP2800 + default y + +config ARCH_IXDP2401 + bool "Support Intel IXDP2401" + help + Say 'Y' here if you want your kernel to support the Intel + IXDP2401 reference platform. For more information on + this platform, see <file:Documentation/arm/IXP2000>. + +config ARCH_IXDP2801 + bool "Support Intel IXDP2801" + help + Say 'Y' here if you want your kernel to support the Intel + IXDP2801 reference platform. For more information on + this platform, see <file:Documentation/arm/IXP2000>. + +config ARCH_IXDP2X01 + bool + depends on ARCH_IXDP2401 || ARCH_IXDP2801 + default y + +endmenu + +endif diff --git a/arch/arm/mach-ixp2000/Makefile b/arch/arm/mach-ixp2000/Makefile new file mode 100644 index 0000000..1e6139d --- /dev/null +++ b/arch/arm/mach-ixp2000/Makefile @@ -0,0 +1,14 @@ +# +# Makefile for the linux kernel. +# +obj-y := core.o pci.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_ARCH_ENP2611) += enp2611.o +obj-$(CONFIG_ARCH_IXDP2400) += ixdp2400.o +obj-$(CONFIG_ARCH_IXDP2800) += ixdp2800.o +obj-$(CONFIG_ARCH_IXDP2X00) += ixdp2x00.o +obj-$(CONFIG_ARCH_IXDP2X01) += ixdp2x01.o + diff --git a/arch/arm/mach-ixp2000/Makefile.boot b/arch/arm/mach-ixp2000/Makefile.boot new file mode 100644 index 0000000..d84c580 --- /dev/null +++ b/arch/arm/mach-ixp2000/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 + diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c new file mode 100644 index 0000000..4f3c3d5c --- /dev/null +++ b/arch/arm/mach-ixp2000/core.c @@ -0,0 +1,390 @@ +/* + * arch/arm/mach-ixp2000/common.c + * + * Common routines used by all IXP2400/2800 based platforms. + * + * Author: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright 2004 (C) MontaVista Software, Inc. + * + * Based on work Copyright (C) 2002-2003 Intel Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/bitops.h> +#include <linux/serial_core.h> +#include <linux/mm.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/tlbflush.h> +#include <asm/pgtable.h> + +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/mach/irq.h> + +static DEFINE_SPINLOCK(ixp2000_slowport_lock); +static unsigned long ixp2000_slowport_irq_flags; + +/************************************************************************* + * Slowport access routines + *************************************************************************/ +void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg) +{ + + spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags); + + old_cfg->CCR = *IXP2000_SLOWPORT_CCR; + old_cfg->WTC = *IXP2000_SLOWPORT_WTC2; + old_cfg->RTC = *IXP2000_SLOWPORT_RTC2; + old_cfg->PCR = *IXP2000_SLOWPORT_PCR; + old_cfg->ADC = *IXP2000_SLOWPORT_ADC; + + ixp2000_reg_write(IXP2000_SLOWPORT_CCR, new_cfg->CCR); + ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC); + ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC); + ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR); + ixp2000_reg_write(IXP2000_SLOWPORT_ADC, new_cfg->ADC); +} + +void ixp2000_release_slowport(struct slowport_cfg *old_cfg) +{ + ixp2000_reg_write(IXP2000_SLOWPORT_CCR, old_cfg->CCR); + ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC); + ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC); + ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR); + ixp2000_reg_write(IXP2000_SLOWPORT_ADC, old_cfg->ADC); + + spin_unlock_irqrestore(&ixp2000_slowport_lock, + ixp2000_slowport_irq_flags); +} + +/************************************************************************* + * Chip specific mappings shared by all IXP2000 systems + *************************************************************************/ +static struct map_desc ixp2000_io_desc[] __initdata = { + { + .virtual = IXP2000_CAP_VIRT_BASE, + .physical = IXP2000_CAP_PHYS_BASE, + .length = IXP2000_CAP_SIZE, + .type = MT_DEVICE + }, { + .virtual = IXP2000_INTCTL_VIRT_BASE, + .physical = IXP2000_INTCTL_PHYS_BASE, + .length = IXP2000_INTCTL_SIZE, + .type = MT_DEVICE + }, { + .virtual = IXP2000_PCI_CREG_VIRT_BASE, + .physical = IXP2000_PCI_CREG_PHYS_BASE, + .length = IXP2000_PCI_CREG_SIZE, + .type = MT_DEVICE + }, { + .virtual = IXP2000_PCI_CSR_VIRT_BASE, + .physical = IXP2000_PCI_CSR_PHYS_BASE, + .length = IXP2000_PCI_CSR_SIZE, + .type = MT_DEVICE + }, { + .virtual = IXP2000_PCI_IO_VIRT_BASE, + .physical = IXP2000_PCI_IO_PHYS_BASE, + .length = IXP2000_PCI_IO_SIZE, + .type = MT_DEVICE + }, { + .virtual = IXP2000_PCI_CFG0_VIRT_BASE, + .physical = IXP2000_PCI_CFG0_PHYS_BASE, + .length = IXP2000_PCI_CFG0_SIZE, + .type = MT_DEVICE + }, { + .virtual = IXP2000_PCI_CFG1_VIRT_BASE, + .physical = IXP2000_PCI_CFG1_PHYS_BASE, + .length = IXP2000_PCI_CFG1_SIZE, + .type = MT_DEVICE + } +}; + +static struct uart_port ixp2000_serial_port = { + .membase = (char *)(IXP2000_UART_VIRT_BASE + 3), + .mapbase = IXP2000_UART_PHYS_BASE + 3, + .irq = IRQ_IXP2000_UART, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = 50000000, + .line = 0, + .type = PORT_XSCALE, + .fifosize = 16 +}; + +void __init ixp2000_map_io(void) +{ + extern unsigned int processor_id; + + /* + * On IXP2400 CPUs we need to use MT_IXP2000_DEVICE for + * tweaking the PMDs so XCB=101. On IXP2800s we use the normal + * PMD flags. + */ + if ((processor_id & 0xfffffff0) == 0x69054190) { + int i; + + printk(KERN_INFO "Enabling IXP2400 erratum #66 workaround\n"); + + for(i=0;i<ARRAY_SIZE(ixp2000_io_desc);i++) + ixp2000_io_desc[i].type = MT_IXP2000_DEVICE; + } + + iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc)); + early_serial_setup(&ixp2000_serial_port); + + /* Set slowport to 8-bit mode. */ + ixp2000_reg_write(IXP2000_SLOWPORT_FRM, 1); +} + +/************************************************************************* + * Timer-tick functions for IXP2000 + *************************************************************************/ +static unsigned ticks_per_jiffy; +static unsigned ticks_per_usec; +static unsigned next_jiffy_time; + +unsigned long ixp2000_gettimeoffset (void) +{ + unsigned long offset; + + offset = next_jiffy_time - *IXP2000_T4_CSR; + + return offset / ticks_per_usec; +} + +static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + write_seqlock(&xtime_lock); + + /* clear timer 1 */ + ixp2000_reg_write(IXP2000_T1_CLR, 1); + + while ((next_jiffy_time - *IXP2000_T4_CSR) > ticks_per_jiffy) { + timer_tick(regs); + next_jiffy_time -= ticks_per_jiffy; + } + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction ixp2000_timer_irq = { + .name = "IXP2000 Timer Tick", + .flags = SA_INTERRUPT, + .handler = ixp2000_timer_interrupt +}; + +void __init ixp2000_init_time(unsigned long tick_rate) +{ + ixp2000_reg_write(IXP2000_T1_CLR, 0); + ixp2000_reg_write(IXP2000_T4_CLR, 0); + + ticks_per_jiffy = (tick_rate + HZ/2) / HZ; + ticks_per_usec = tick_rate / 1000000; + + ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1); + ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7)); + + /* + * We use T4 as a monotonic counter to track missed jiffies + */ + ixp2000_reg_write(IXP2000_T4_CLD, -1); + ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7)); + next_jiffy_time = 0xffffffff; + + /* register for interrupt */ + setup_irq(IRQ_IXP2000_TIMER1, &ixp2000_timer_irq); +} + +/************************************************************************* + * GPIO helpers + *************************************************************************/ +static unsigned long GPIO_IRQ_rising_edge; +static unsigned long GPIO_IRQ_falling_edge; +static unsigned long GPIO_IRQ_level_low; +static unsigned long GPIO_IRQ_level_high; + +void gpio_line_config(int line, int style) +{ + unsigned long flags; + + local_irq_save(flags); + + if(style == GPIO_OUT) { + /* if it's an output, it ain't an interrupt anymore */ + ixp2000_reg_write(IXP2000_GPIO_PDSR, (1 << line)); + GPIO_IRQ_falling_edge &= ~(1 << line); + GPIO_IRQ_rising_edge &= ~(1 << line); + GPIO_IRQ_level_low &= ~(1 << line); + GPIO_IRQ_level_high &= ~(1 << line); + ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); + ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); + ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); + ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); + irq_desc[line+IRQ_IXP2000_GPIO0].valid = 0; + } else if(style == GPIO_IN) { + ixp2000_reg_write(IXP2000_GPIO_PDCR, (1 << line)); + } + + local_irq_restore(flags); +} + + +/************************************************************************* + * IRQ handling IXP2000 + *************************************************************************/ +static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + int i; + unsigned long status = *IXP2000_GPIO_INST; + + for (i = 0; i <= 7; i++) { + if (status & (1<<i)) { + desc = irq_desc + i + IRQ_IXP2000_GPIO0; + desc->handle(i + IRQ_IXP2000_GPIO0, desc, regs); + } + } +} + +static void ixp2000_GPIO_irq_mask_ack(unsigned int irq) +{ + ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); + ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); +} + +static void ixp2000_GPIO_irq_mask(unsigned int irq) +{ + ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); +} + +static void ixp2000_GPIO_irq_unmask(unsigned int irq) +{ + ixp2000_reg_write(IXP2000_GPIO_INSR, (1 << (irq - IRQ_IXP2000_GPIO0))); +} + +static struct irqchip ixp2000_GPIO_irq_chip = { + .ack = ixp2000_GPIO_irq_mask_ack, + .mask = ixp2000_GPIO_irq_mask, + .unmask = ixp2000_GPIO_irq_unmask +}; + +static void ixp2000_pci_irq_mask(unsigned int irq) +{ + unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE; + if (irq == IRQ_IXP2000_PCIA) + ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26))); + else if (irq == IRQ_IXP2000_PCIB) + ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27))); +} + +static void ixp2000_pci_irq_unmask(unsigned int irq) +{ + unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE; + if (irq == IRQ_IXP2000_PCIA) + ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 26))); + else if (irq == IRQ_IXP2000_PCIB) + ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27))); +} + +static struct irqchip ixp2000_pci_irq_chip = { + .ack = ixp2000_pci_irq_mask, + .mask = ixp2000_pci_irq_mask, + .unmask = ixp2000_pci_irq_unmask +}; + +static void ixp2000_irq_mask(unsigned int irq) +{ + ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, (1 << irq)); +} + +static void ixp2000_irq_unmask(unsigned int irq) +{ + ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq)); +} + +static struct irqchip ixp2000_irq_chip = { + .ack = ixp2000_irq_mask, + .mask = ixp2000_irq_mask, + .unmask = ixp2000_irq_unmask +}; + +void __init ixp2000_init_irq(void) +{ + int irq; + + /* + * Mask all sources + */ + ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, 0xffffffff); + ixp2000_reg_write(IXP2000_FIQ_ENABLE_CLR, 0xffffffff); + + /* clear all GPIO edge/level detects */ + ixp2000_reg_write(IXP2000_GPIO_REDR, 0); + ixp2000_reg_write(IXP2000_GPIO_FEDR, 0); + ixp2000_reg_write(IXP2000_GPIO_LSHR, 0); + ixp2000_reg_write(IXP2000_GPIO_LSLR, 0); + ixp2000_reg_write(IXP2000_GPIO_INCR, -1); + + /* clear PCI interrupt sources */ + ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, 0); + + /* + * Certain bits in the IRQ status register of the + * IXP2000 are reserved. Instead of trying to map + * things non 1:1 from bit position to IRQ number, + * we mark the reserved IRQs as invalid. This makes + * our mask/unmask code much simpler. + */ + for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) { + if((1 << irq) & IXP2000_VALID_IRQ_MASK) { + set_irq_chip(irq, &ixp2000_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID); + } else set_irq_flags(irq, 0); + } + + /* + * GPIO IRQs are invalid until someone sets the interrupt mode + * by calling gpio_line_set(); + */ + for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) { + set_irq_chip(irq, &ixp2000_GPIO_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, 0); + } + set_irq_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler); + + /* + * Enable PCI irqs. The actual PCI[AB] decoding is done in + * entry-macro.S, so we don't need a chained handler for the + * PCI interrupt source. + */ + ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << IRQ_IXP2000_PCI)); + for (irq = IRQ_IXP2000_PCIA; irq <= IRQ_IXP2000_PCIB; irq++) { + set_irq_chip(irq, &ixp2000_pci_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID); + } +} + diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c new file mode 100644 index 0000000..04b38bc --- /dev/null +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -0,0 +1,220 @@ +/* + * arch/arm/mach-ixp2000/enp2611.c + * + * Radisys ENP-2611 support. + * + * Created 2004 by Lennert Buytenhek from the ixdp2x01 code. The + * original version carries the following notices: + * + * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com> + * Maintainer: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright (C) 2002-2003 Intel Corp. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/bitops.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_core.h> +#include <linux/device.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/system.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> + +#include <asm/mach/pci.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +/************************************************************************* + * ENP-2611 timer tick configuration + *************************************************************************/ +static void __init enp2611_timer_init(void) +{ + ixp2000_init_time(50 * 1000 * 1000); +} + +static struct sys_timer enp2611_timer = { + .init = enp2611_timer_init, + .offset = ixp2000_gettimeoffset, +}; + + +/************************************************************************* + * ENP-2611 PCI + *************************************************************************/ +static int enp2611_pci_setup(int nr, struct pci_sys_data *sys) +{ + sys->mem_offset = 0xe0000000; + ixp2000_pci_setup(nr, sys); + return 1; +} + +static void __init enp2611_pci_preinit(void) +{ + ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000); + ixp2000_pci_preinit(); +} + +static inline int enp2611_pci_valid_device(struct pci_bus *bus, + unsigned int devfn) +{ + /* The 82559 ethernet controller appears at both PCI:1:0:0 and + * PCI:1:2:0, so let's pretend the second one isn't there. + */ + if (bus->number == 0x01 && devfn == 0x10) + return 0; + + return 1; +} + +static int enp2611_pci_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *value) +{ + if (enp2611_pci_valid_device(bus, devfn)) + return ixp2000_pci_read_config(bus, devfn, where, size, value); + + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static int enp2611_pci_write_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 value) +{ + if (enp2611_pci_valid_device(bus, devfn)) + return ixp2000_pci_write_config(bus, devfn, where, size, value); + + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static struct pci_ops enp2611_pci_ops = { + .read = enp2611_pci_read_config, + .write = enp2611_pci_write_config +}; + +static struct pci_bus * __init enp2611_pci_scan_bus(int nr, + struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &enp2611_pci_ops, sys); +} + +static int __init enp2611_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 0) { + /* IXP2400. */ + irq = IRQ_IXP2000_PCIA; + } else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 1) { + /* 21555 non-transparent bridge. */ + irq = IRQ_IXP2000_PCIB; + } else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 4) { + /* PCI2050B transparent bridge. */ + irq = -1; + } else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 0) { + /* 82559 ethernet. */ + irq = IRQ_IXP2000_PCIA; + } else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 1) { + /* SPI-3 option board. */ + irq = IRQ_IXP2000_PCIB; + } else { + printk(KERN_ERR "enp2611_pci_map_irq() called for unknown " + "device PCI:%d:%d:%d\n", dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + irq = -1; + } + + return irq; +} + +struct hw_pci enp2611_pci __initdata = { + .nr_controllers = 1, + .setup = enp2611_pci_setup, + .preinit = enp2611_pci_preinit, + .scan = enp2611_pci_scan_bus, + .map_irq = enp2611_pci_map_irq, +}; + +int __init enp2611_pci_init(void) +{ + if (machine_is_enp2611()) + pci_common_init(&enp2611_pci); + + return 0; +} + +subsys_initcall(enp2611_pci_init); + + +/************************************************************************* + * ENP-2611 Machine Intialization + *************************************************************************/ +static struct flash_platform_data enp2611_flash_platform_data = { + .map_name = "cfi_probe", + .width = 1, +}; + +static struct ixp2000_flash_data enp2611_flash_data = { + .platform_data = &enp2611_flash_platform_data, + .nr_banks = 1 +}; + +static struct resource enp2611_flash_resource = { + .start = 0xc4000000, + .end = 0xc4000000 + 0x00ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device enp2611_flash = { + .name = "IXP2000-Flash", + .id = 0, + .dev = { + .platform_data = &enp2611_flash_data, + }, + .num_resources = 1, + .resource = &enp2611_flash_resource, +}; + +static struct platform_device *enp2611_devices[] __initdata = { + &enp2611_flash +}; + +static void __init enp2611_init_machine(void) +{ + platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices)); +} + + +MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board") + MAINTAINER("Lennert Buytenhek <buytenh@wantstofly.org>") + BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) + BOOT_PARAMS(0x00000100) + MAPIO(ixp2000_map_io) + INITIRQ(ixp2000_init_irq) + .timer = &enp2611_timer, + INIT_MACHINE(enp2611_init_machine) +MACHINE_END + + diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c new file mode 100644 index 0000000..df3ff26 --- /dev/null +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -0,0 +1,179 @@ +/* + * arch/arm/mach-ixp2000/ixdp2400.c + * + * IXDP2400 platform support + * + * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> + * Maintainer: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright (C) 2002 Intel Corp. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/bitops.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/delay.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/system.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> + +#include <asm/mach/pci.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> +#include <asm/mach/flash.h> +#include <asm/mach/arch.h> + +/************************************************************************* + * IXDP2400 timer tick + *************************************************************************/ +static void __init ixdp2400_timer_init(void) +{ + int numerator, denominator; + int denom_array[] = {2, 4, 8, 16, 1, 2, 4, 8}; + + numerator = (*(IXDP2400_CPLD_SYS_CLK_M) & 0xFF) *2; + denominator = denom_array[(*(IXDP2400_CPLD_SYS_CLK_N) & 0x7)]; + + ixp2000_init_time(((3125000 * numerator) / (denominator)) / 2); +} + +static struct sys_timer ixdp2400_timer = { + .init = ixdp2400_timer_init, + .offset = ixp2000_gettimeoffset, +}; + +/************************************************************************* + * IXDP2400 PCI + *************************************************************************/ +void __init ixdp2400_pci_preinit(void) +{ + ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000); + ixp2000_pci_preinit(); +} + +int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys) +{ + sys->mem_offset = 0xe0000000; + + ixp2000_pci_setup(nr, sys); + + return 1; +} + +static int __init ixdp2400_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + if (ixdp2x00_master_npu()) { + + /* + * Root bus devices. Slave NPU is only one with interrupt. + * Everything else, we just return -1 b/c nothing else + * on the root bus has interrupts. + */ + if(!dev->bus->self) { + if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN ) + return IRQ_IXDP2400_INGRESS_NPU; + + return -1; + } + + /* + * Bridge behind the PMC slot. + * NOTE: Only INTA from the PMC slot is routed. VERY BAD. + */ + if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN && + dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN && + !dev->bus->parent->self->bus->parent) + return IRQ_IXDP2400_PMC; + + /* + * Device behind the first bridge + */ + if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) { + switch(dev->devfn) { + case IXDP2400_MASTER_ENET_DEVFN: + return IRQ_IXDP2400_ENET; + + case IXDP2400_MEDIA_DEVFN: + return IRQ_IXDP2400_MEDIA_PCI; + + case IXDP2400_SWITCH_FABRIC_DEVFN: + return IRQ_IXDP2400_SF_PCI; + + case IXDP2X00_PMC_DEVFN: + return IRQ_IXDP2400_PMC; + } + } + + return -1; + } else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */ +} + + +static void ixdp2400_pci_postinit(void) +{ + struct pci_dev *dev; + + if (ixdp2x00_master_npu()) { + dev = pci_find_slot(1, IXDP2400_SLAVE_ENET_DEVFN); + pci_remove_bus_device(dev); + } else { + dev = pci_find_slot(1, IXDP2400_MASTER_ENET_DEVFN); + pci_remove_bus_device(dev); + + ixdp2x00_slave_pci_postinit(); + } +} + +static struct hw_pci ixdp2400_pci __initdata = { + .nr_controllers = 1, + .setup = ixdp2400_pci_setup, + .preinit = ixdp2400_pci_preinit, + .postinit = ixdp2400_pci_postinit, + .scan = ixp2000_pci_scan_bus, + .map_irq = ixdp2400_pci_map_irq, +}; + +int __init ixdp2400_pci_init(void) +{ + if (machine_is_ixdp2400()) + pci_common_init(&ixdp2400_pci); + + return 0; +} + +subsys_initcall(ixdp2400_pci_init); + +void ixdp2400_init_irq(void) +{ + ixdp2x00_init_irq(IXDP2400_CPLD_INT_STAT, IXDP2400_CPLD_INT_MASK, IXDP2400_NR_IRQS); +} + +MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform") + MAINTAINER("MontaVista Software, Inc.") + BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) + BOOT_PARAMS(0x00000100) + MAPIO(ixdp2x00_map_io) + INITIRQ(ixdp2400_init_irq) + .timer = &ixdp2400_timer, + INIT_MACHINE(ixdp2x00_init_machine) +MACHINE_END + diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c new file mode 100644 index 0000000..c4683aa --- /dev/null +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -0,0 +1,180 @@ +/* + * arch/arm/mach-ixp2000/ixdp2800.c + * + * IXDP2800 platform support + * + * Original Author: Jeffrey Daly <jeffrey.daly@intel.com> + * Maintainer: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright (C) 2002 Intel Corp. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/bitops.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/delay.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/system.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> + +#include <asm/mach/pci.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> +#include <asm/mach/flash.h> +#include <asm/mach/arch.h> + + +void ixdp2400_init_irq(void) +{ + ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2400_NR_IRQS); +} + +/************************************************************************* + * IXDP2800 timer tick + *************************************************************************/ + +static void __init ixdp2800_timer_init(void) +{ + ixp2000_init_time(50000000); +} + +static struct sys_timer ixdp2800_timer = { + .init = ixdp2800_timer_init, + .offset = ixp2000_gettimeoffset, +}; + +/************************************************************************* + * IXDP2800 PCI + *************************************************************************/ +void __init ixdp2800_pci_preinit(void) +{ + printk("ixdp2x00_pci_preinit called\n"); + + *IXP2000_PCI_ADDR_EXT = 0x0000e000; + + *IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff; + *IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff; + + ixp2000_pci_preinit(); +} + +int ixdp2800_pci_setup(int nr, struct pci_sys_data *sys) +{ + sys->mem_offset = 0x00000000; + + ixp2000_pci_setup(nr, sys); + + return 1; +} + +static int __init ixdp2800_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + if (ixdp2x00_master_npu()) { + + /* + * Root bus devices. Slave NPU is only one with interrupt. + * Everything else, we just return -1 which is invalid. + */ + if(!dev->bus->self) { + if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN ) + return IRQ_IXDP2800_INGRESS_NPU; + + return -1; + } + + /* + * Bridge behind the PMC slot. + */ + if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN && + dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN && + !dev->bus->parent->self->bus->parent) + return IRQ_IXDP2800_PMC; + + /* + * Device behind the first bridge + */ + if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) { + switch(dev->devfn) { + case IXDP2X00_PMC_DEVFN: + return IRQ_IXDP2800_PMC; + + case IXDP2800_MASTER_ENET_DEVFN: + return IRQ_IXDP2800_EGRESS_ENET; + + case IXDP2800_SWITCH_FABRIC_DEVFN: + return IRQ_IXDP2800_FABRIC; + } + } + + return -1; + } else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */ +} + +static void ixdp2800_pci_postinit(void) +{ + struct pci_dev *dev; + + if (ixdp2x00_master_npu()) { + dev = pci_find_slot(1, IXDP2800_SLAVE_ENET_DEVFN); + pci_remove_bus_device(dev); + } else { + dev = pci_find_slot(1, IXDP2800_MASTER_ENET_DEVFN); + pci_remove_bus_device(dev); + + ixdp2x00_slave_pci_postinit(); + } +} + +struct hw_pci ixdp2800_pci __initdata = { + .nr_controllers = 1, + .setup = ixdp2800_pci_setup, + .preinit = ixdp2800_pci_preinit, + .postinit = ixdp2800_pci_postinit, + .scan = ixp2000_pci_scan_bus, + .map_irq = ixdp2800_pci_map_irq, +}; + +int __init ixdp2800_pci_init(void) +{ + if (machine_is_ixdp2800()) + pci_common_init(&ixdp2800_pci); + + return 0; +} + +subsys_initcall(ixdp2800_pci_init); + +void ixdp2800_init_irq(void) +{ + ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS); +} + +MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform") + MAINTAINER("MontaVista Software, Inc.") + BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) + BOOT_PARAMS(0x00000100) + MAPIO(ixdp2x00_map_io) + INITIRQ(ixdp2800_init_irq) + .timer = &ixdp2800_timer, + INIT_MACHINE(ixdp2x00_init_machine) +MACHINE_END + diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c new file mode 100644 index 0000000..21c41fe --- /dev/null +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -0,0 +1,304 @@ +/* + * arch/arm/mach-ixp2000/ixdp2x00.c + * + * Code common to IXDP2400 and IXDP2800 platforms. + * + * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> + * Maintainer: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright (C) 2002 Intel Corp. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/bitops.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/delay.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/system.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> + +#include <asm/mach/pci.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> +#include <asm/mach/flash.h> +#include <asm/mach/arch.h> + +/************************************************************************* + * IXDP2x00 IRQ Initialization + *************************************************************************/ +static volatile unsigned long *board_irq_mask; +static volatile unsigned long *board_irq_stat; +static unsigned long board_irq_count; + +#ifdef CONFIG_ARCH_IXDP2400 +/* + * Slowport configuration for accessing CPLD registers on IXDP2x00 + */ +static struct slowport_cfg slowport_cpld_cfg = { + .CCR = SLOWPORT_CCR_DIV_2, + .WTC = 0x00000070, + .RTC = 0x00000070, + .PCR = SLOWPORT_MODE_FLASH, + .ADC = SLOWPORT_ADDR_WIDTH_24 | SLOWPORT_DATA_WIDTH_8 +}; +#endif + +static void ixdp2x00_irq_mask(unsigned int irq) +{ + unsigned long dummy; + static struct slowport_cfg old_cfg; + + /* + * This is ugly in common code but really don't know + * of a better way to handle it. :( + */ +#ifdef CONFIG_ARCH_IXDP2400 + if (machine_is_ixdp2400()) + ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg); +#endif + + dummy = *board_irq_mask; + dummy |= IXP2000_BOARD_IRQ_MASK(irq); + ixp2000_reg_write(board_irq_mask, dummy); + +#ifdef CONFIG_ARCH_IXDP2400 + if (machine_is_ixdp2400()) + ixp2000_release_slowport(&old_cfg); +#endif +} + +static void ixdp2x00_irq_unmask(unsigned int irq) +{ + unsigned long dummy; + static struct slowport_cfg old_cfg; + +#ifdef CONFIG_ARCH_IXDP2400 + if (machine_is_ixdp2400()) + ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg); +#endif + + dummy = *board_irq_mask; + dummy &= ~IXP2000_BOARD_IRQ_MASK(irq); + ixp2000_reg_write(board_irq_mask, dummy); + + if (machine_is_ixdp2400()) + ixp2000_release_slowport(&old_cfg); +} + +static void ixdp2x00_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + volatile u32 ex_interrupt = 0; + static struct slowport_cfg old_cfg; + int i; + + desc->chip->mask(irq); + +#ifdef CONFIG_ARCH_IXDP2400 + if (machine_is_ixdp2400()) + ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg); +#endif + ex_interrupt = *board_irq_stat & 0xff; + if (machine_is_ixdp2400()) + ixp2000_release_slowport(&old_cfg); + + if(!ex_interrupt) { + printk(KERN_ERR "Spurious IXDP2x00 CPLD interrupt!\n"); + return; + } + + for(i = 0; i < board_irq_count; i++) { + if(ex_interrupt & (1 << i)) { + struct irqdesc *cpld_desc; + int cpld_irq = IXP2000_BOARD_IRQ(0) + i; + cpld_desc = irq_desc + cpld_irq; + cpld_desc->handle(cpld_irq, cpld_desc, regs); + } + } + + desc->chip->unmask(irq); +} + +static struct irqchip ixdp2x00_cpld_irq_chip = { + .ack = ixdp2x00_irq_mask, + .mask = ixdp2x00_irq_mask, + .unmask = ixdp2x00_irq_unmask +}; + +void ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_irqs) +{ + unsigned int irq; + + ixp2000_init_irq(); + + if (!ixdp2x00_master_npu()) + return; + + board_irq_stat = stat_reg; + board_irq_mask = mask_reg; + board_irq_count = nr_irqs; + + *board_irq_mask = 0xffffffff; + + for(irq = IXP2000_BOARD_IRQ(0); irq < IXP2000_BOARD_IRQ(board_irq_count); irq++) { + set_irq_chip(irq, &ixdp2x00_cpld_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID); + } + + /* Hook into PCI interrupt */ + set_irq_chained_handler(IRQ_IXP2000_PCIB, &ixdp2x00_irq_handler); +} + +/************************************************************************* + * IXDP2x00 memory map + *************************************************************************/ +static struct map_desc ixdp2x00_io_desc __initdata = { + .virtual = IXDP2X00_VIRT_CPLD_BASE, + .physical = IXDP2X00_PHYS_CPLD_BASE, + .length = IXDP2X00_CPLD_SIZE, + .type = MT_DEVICE +}; + +void __init ixdp2x00_map_io(void) +{ + ixp2000_map_io(); + + iotable_init(&ixdp2x00_io_desc, 1); +} + +/************************************************************************* + * IXDP2x00-common PCI init + * + * The IXDP2[48]00 has a horrid PCI bus layout. Basically the board + * contains two NPUs (ingress and egress) connected over PCI, both running + * instances of the kernel. So far so good. Peers on the PCI bus running + * Linux is a common design in telecom systems. The problem is that instead + * of all the devices being controlled by a single host, different + * devices are controlles by different NPUs on the same bus, leading to + * multiple hosts on the bus. The exact bus layout looks like: + * + * Bus 0 + * Master NPU <-------------------+-------------------> Slave NPU + * | + * | + * P2P + * | + * + * Bus 1 | + * <--+------+---------+---------+------+--> + * | | | | | + * | | | | | + * ... Dev PMC Media Eth0 Eth1 ... + * + * The master controlls all but Eth1, which is controlled by the + * slave. What this means is that the both the master and the slave + * have to scan the bus, but only one of them can enumerate the bus. + * In addition, after the bus is scanned, each kernel must remove + * the device(s) it does not control from the PCI dev list otherwise + * a driver on each NPU will try to manage it and we will have horrible + * conflicts. Oh..and the slave NPU needs to see the master NPU + * for Intel's drivers to work properly. Closed source drivers... + * + * The way we deal with this is fairly simple but ugly: + * + * 1) Let master scan and enumerate the bus completely. + * 2) Master deletes Eth1 from device list. + * 3) Slave scans bus and then deletes all but Eth1 (Eth0 on slave) + * from device list. + * 4) Find HW designers and LART them. + * + * The boards also do not do normal PCI IRQ routing, or any sort of + * sensical swizzling, so we just need to check where on the bus a + * device sits and figure out to which CPLD pin the interrupt is routed. + * See ixdp2[48]00.c files. + * + *************************************************************************/ +void ixdp2x00_slave_pci_postinit(void) +{ + struct pci_dev *dev; + + /* + * Remove PMC device is there is one + */ + if((dev = pci_find_slot(1, IXDP2X00_PMC_DEVFN))) + pci_remove_bus_device(dev); + + dev = pci_find_slot(0, IXDP2X00_21555_DEVFN); + pci_remove_bus_device(dev); +} + +/************************************************************************** + * IXDP2x00 Machine Setup + *************************************************************************/ +static struct flash_platform_data ixdp2x00_platform_data = { + .map_name = "cfi_probe", + .width = 1, +}; + +static struct ixp2000_flash_data ixdp2x00_flash_data = { + .platform_data = &ixdp2x00_platform_data, + .nr_banks = 1 +}; + +static struct resource ixdp2x00_flash_resource = { + .start = 0xc4000000, + .end = 0xc4000000 + 0x00ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ixdp2x00_flash = { + .name = "IXP2000-Flash", + .id = 0, + .dev = { + .platform_data = &ixdp2x00_flash_data, + }, + .num_resources = 1, + .resource = &ixdp2x00_flash_resource, +}; + +static struct ixp2000_i2c_pins ixdp2x00_i2c_gpio_pins = { + .sda_pin = IXDP2X00_GPIO_SDA, + .scl_pin = IXDP2X00_GPIO_SCL, +}; + +static struct platform_device ixdp2x00_i2c_controller = { + .name = "IXP2000-I2C", + .id = 0, + .dev = { + .platform_data = &ixdp2x00_i2c_gpio_pins, + }, + .num_resources = 0 +}; + +static struct platform_device *ixdp2x00_devices[] __initdata = { + &ixdp2x00_flash, + &ixdp2x00_i2c_controller +}; + +void __init ixdp2x00_init_machine(void) +{ + gpio_line_set(IXDP2X00_GPIO_I2C_ENABLE, 1); + gpio_line_config(IXDP2X00_GPIO_I2C_ENABLE, GPIO_OUT); + + platform_add_devices(ixdp2x00_devices, ARRAY_SIZE(ixdp2x00_devices)); +} + diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c new file mode 100644 index 0000000..e94dace --- /dev/null +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -0,0 +1,400 @@ +/* + * arch/arm/mach-ixp2000/ixdp2x01.c + * + * Code common to Intel IXDP2401 and IXDP2801 platforms + * + * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com> + * Maintainer: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright (C) 2002-2003 Intel Corp. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/bitops.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_core.h> +#include <linux/device.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/system.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> + +#include <asm/mach/pci.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +/************************************************************************* + * IXDP2x01 IRQ Handling + *************************************************************************/ +static void ixdp2x01_irq_mask(unsigned int irq) +{ + ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, + IXP2000_BOARD_IRQ_MASK(irq)); +} + +static void ixdp2x01_irq_unmask(unsigned int irq) +{ + ixp2000_reg_write(IXDP2X01_INT_MASK_CLR_REG, + IXP2000_BOARD_IRQ_MASK(irq)); +} + +static u32 valid_irq_mask; + +static void ixdp2x01_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + u32 ex_interrupt; + int i; + + desc->chip->mask(irq); + + ex_interrupt = *IXDP2X01_INT_STAT_REG & valid_irq_mask; + + if (!ex_interrupt) { + printk(KERN_ERR "Spurious IXDP2X01 CPLD interrupt!\n"); + return; + } + + for (i = 0; i < IXP2000_BOARD_IRQS; i++) { + if (ex_interrupt & (1 << i)) { + struct irqdesc *cpld_desc; + int cpld_irq = IXP2000_BOARD_IRQ(0) + i; + cpld_desc = irq_desc + cpld_irq; + cpld_desc->handle(cpld_irq, cpld_desc, regs); + } + } + + desc->chip->unmask(irq); +} + +static struct irqchip ixdp2x01_irq_chip = { + .mask = ixdp2x01_irq_mask, + .ack = ixdp2x01_irq_mask, + .unmask = ixdp2x01_irq_unmask +}; + +/* + * We only do anything if we are the master NPU on the board. + * The slave NPU only has the ethernet chip going directly to + * the PCIB interrupt input. + */ +void __init ixdp2x01_init_irq(void) +{ + int irq = 0; + + /* initialize chip specific interrupts */ + ixp2000_init_irq(); + + if (machine_is_ixdp2401()) + valid_irq_mask = IXDP2401_VALID_IRQ_MASK; + else + valid_irq_mask = IXDP2801_VALID_IRQ_MASK; + + /* Mask all interrupts from CPLD, disable simulation */ + ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff); + ixp2000_reg_write(IXDP2X01_INT_SIM_REG, 0); + + for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) { + if (irq & valid_irq_mask) { + set_irq_chip(irq, &ixdp2x01_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID); + } else { + set_irq_flags(irq, 0); + } + } + + /* Hook into PCI interrupts */ + set_irq_chained_handler(IRQ_IXP2000_PCIB, &ixdp2x01_irq_handler); +} + + +/************************************************************************* + * IXDP2x01 memory map and serial ports + *************************************************************************/ +static struct map_desc ixdp2x01_io_desc __initdata = { + .virtual = IXDP2X01_VIRT_CPLD_BASE, + .physical = IXDP2X01_PHYS_CPLD_BASE, + .length = IXDP2X01_CPLD_REGION_SIZE, + .type = MT_DEVICE +}; + +static struct uart_port ixdp2x01_serial_ports[2] = { + { + .membase = (char *)(IXDP2X01_UART1_VIRT_BASE), + .mapbase = (unsigned long)IXDP2X01_UART1_PHYS_BASE, + .irq = IRQ_IXDP2X01_UART1, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM32, + .regshift = 2, + .uartclk = IXDP2X01_UART_CLK, + .line = 1, + .type = PORT_16550A, + .fifosize = 16 + }, { + .membase = (char *)(IXDP2X01_UART2_VIRT_BASE), + .mapbase = (unsigned long)IXDP2X01_UART2_PHYS_BASE, + .irq = IRQ_IXDP2X01_UART2, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM32, + .regshift = 2, + .uartclk = IXDP2X01_UART_CLK, + .line = 2, + .type = PORT_16550A, + .fifosize = 16 + }, +}; + +static void __init ixdp2x01_map_io(void) +{ + ixp2000_map_io(); + + iotable_init(&ixdp2x01_io_desc, 1); + + early_serial_setup(&ixdp2x01_serial_ports[0]); + early_serial_setup(&ixdp2x01_serial_ports[1]); +} + + +/************************************************************************* + * IXDP2x01 timer tick configuration + *************************************************************************/ +static unsigned int ixdp2x01_clock; + +static int __init ixdp2x01_clock_setup(char *str) +{ + ixdp2x01_clock = simple_strtoul(str, NULL, 10); + + return 1; +} + +__setup("ixdp2x01_clock=", ixdp2x01_clock_setup); + +static void __init ixdp2x01_timer_init(void) +{ + if (!ixdp2x01_clock) + ixdp2x01_clock = 50000000; + + ixp2000_init_time(ixdp2x01_clock); +} + +static struct sys_timer ixdp2x01_timer = { + .init = ixdp2x01_timer_init, + .offset = ixp2000_gettimeoffset, +}; + +/************************************************************************* + * IXDP2x01 PCI + *************************************************************************/ +void __init ixdp2x01_pci_preinit(void) +{ + ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000); + ixp2000_pci_preinit(); +} + +#define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) + +static int __init ixdp2x01_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + u8 bus = dev->bus->number; + u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin); + struct pci_bus *tmp_bus = dev->bus; + + /* Primary bus, no interrupts here */ + if (bus == 0) { + return -1; + } + + /* Lookup first leaf in bus tree */ + while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) { + tmp_bus = tmp_bus->parent; + } + + /* Select between known bridges */ + switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) { + /* Device is located after first MB bridge */ + case 0x0008: + if (tmp_bus == dev->bus) { + /* Device is located directy after first MB bridge */ + switch (devpin) { + case DEVPIN(1, 1): /* Onboard 82546 ch 0 */ + if (machine_is_ixdp2401()) + return IRQ_IXDP2401_INTA_82546; + return -1; + case DEVPIN(1, 2): /* Onboard 82546 ch 1 */ + if (machine_is_ixdp2401()) + return IRQ_IXDP2401_INTB_82546; + return -1; + case DEVPIN(0, 1): /* PMC INTA# */ + return IRQ_IXDP2X01_SPCI_PMC_INTA; + case DEVPIN(0, 2): /* PMC INTB# */ + return IRQ_IXDP2X01_SPCI_PMC_INTB; + case DEVPIN(0, 3): /* PMC INTC# */ + return IRQ_IXDP2X01_SPCI_PMC_INTC; + case DEVPIN(0, 4): /* PMC INTD# */ + return IRQ_IXDP2X01_SPCI_PMC_INTD; + } + } + break; + case 0x0010: + if (tmp_bus == dev->bus) { + /* Device is located directy after second MB bridge */ + /* Secondary bus of second bridge */ + switch (devpin) { + case DEVPIN(0, 1): /* DB#0 */ + return IRQ_IXDP2X01_SPCI_DB_0; + case DEVPIN(1, 1): /* DB#1 */ + return IRQ_IXDP2X01_SPCI_DB_1; + } + } else { + /* Device is located indirectly after second MB bridge */ + /* Not supported now */ + } + break; + } + + return -1; +} + + +static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys) +{ + sys->mem_offset = 0xe0000000; + + if (machine_is_ixdp2801()) + sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16); + + return ixp2000_pci_setup(nr, sys); +} + +struct hw_pci ixdp2x01_pci __initdata = { + .nr_controllers = 1, + .setup = ixdp2x01_pci_setup, + .preinit = ixdp2x01_pci_preinit, + .scan = ixp2000_pci_scan_bus, + .map_irq = ixdp2x01_pci_map_irq, +}; + +int __init ixdp2x01_pci_init(void) +{ + + pci_common_init(&ixdp2x01_pci); + return 0; +} + +subsys_initcall(ixdp2x01_pci_init); + +/************************************************************************* + * IXDP2x01 Machine Intialization + *************************************************************************/ +static struct flash_platform_data ixdp2x01_flash_platform_data = { + .map_name = "cfi_probe", + .width = 1, +}; + +static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs) +{ + ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, + ((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN)); + return (ofs & IXDP2X01_FLASH_WINDOW_MASK); +} + +static struct ixp2000_flash_data ixdp2x01_flash_data = { + .platform_data = &ixdp2x01_flash_platform_data, + .bank_setup = ixdp2x01_flash_bank_setup +}; + +static struct resource ixdp2x01_flash_resource = { + .start = 0xc4000000, + .end = 0xc4000000 + 0x01ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ixdp2x01_flash = { + .name = "IXP2000-Flash", + .id = 0, + .dev = { + .platform_data = &ixdp2x01_flash_data, + }, + .num_resources = 1, + .resource = &ixdp2x01_flash_resource, +}; + +static struct ixp2000_i2c_pins ixdp2x01_i2c_gpio_pins = { + .sda_pin = IXDP2X01_GPIO_SDA, + .scl_pin = IXDP2X01_GPIO_SCL, +}; + +static struct platform_device ixdp2x01_i2c_controller = { + .name = "IXP2000-I2C", + .id = 0, + .dev = { + .platform_data = &ixdp2x01_i2c_gpio_pins, + }, + .num_resources = 0 +}; + +static struct platform_device *ixdp2x01_devices[] __initdata = { + &ixdp2x01_flash, + &ixdp2x01_i2c_controller +}; + +static void __init ixdp2x01_init_machine(void) +{ + ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, + (IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN)); + + ixdp2x01_flash_data.nr_banks = + ((*IXDP2X01_CPLD_FLASH_REG & IXDP2X01_CPLD_FLASH_BANK_MASK) + 1); + + platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices)); +} + + +#ifdef CONFIG_ARCH_IXDP2401 +MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform") + MAINTAINER("MontaVista Software, Inc.") + BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) + BOOT_PARAMS(0x00000100) + MAPIO(ixdp2x01_map_io) + INITIRQ(ixdp2x01_init_irq) + .timer = &ixdp2x01_timer, + INIT_MACHINE(ixdp2x01_init_machine) +MACHINE_END +#endif + +#ifdef CONFIG_ARCH_IXDP2801 +MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform") + MAINTAINER("MontaVista Software, Inc.") + BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) + BOOT_PARAMS(0x00000100) + MAPIO(ixdp2x01_map_io) + INITIRQ(ixdp2x01_init_irq) + .timer = &ixdp2x01_timer, + INIT_MACHINE(ixdp2x01_init_machine) +MACHINE_END +#endif + + diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c new file mode 100644 index 0000000..831f8ff --- /dev/null +++ b/arch/arm/mach-ixp2000/pci.c @@ -0,0 +1,235 @@ +/* + * arch/arm/mach-ixp2000/pci.c + * + * PCI routines for IXDP2400/IXDP2800 boards + * + * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> + * Maintained by: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright 2002 Intel Corp. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/delay.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> + +#include <asm/mach/pci.h> + +static int pci_master_aborts = 0; + +static int clear_master_aborts(void); + +static u32 * +ixp2000_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where) +{ + u32 *paddress; + + if (PCI_SLOT(devfn) > 7) + return 0; + + /* Must be dword aligned */ + where &= ~3; + + /* + * For top bus, generate type 0, else type 1 + */ + if (!bus_nr) { + /* only bits[23:16] are used for IDSEL */ + paddress = (u32 *) (IXP2000_PCI_CFG0_VIRT_BASE + | (1 << (PCI_SLOT(devfn) + 16)) + | (PCI_FUNC(devfn) << 8) | where); + } else { + paddress = (u32 *) (IXP2000_PCI_CFG1_VIRT_BASE + | (bus_nr << 16) + | (PCI_SLOT(devfn) << 11) + | (PCI_FUNC(devfn) << 8) | where); + } + + return paddress; +} + +/* + * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes. + * 0 and 3 are not valid indexes... + */ +static u32 bytemask[] = { + /*0*/ 0, + /*1*/ 0xff, + /*2*/ 0xffff, + /*3*/ 0, + /*4*/ 0xffffffff, +}; + + +int ixp2000_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *value) +{ + u32 n; + u32 *addr; + + n = where % 4; + + addr = ixp2000_pci_config_addr(bus->number, devfn, where); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + pci_master_aborts = 0; + *value = (*addr >> (8*n)) & bytemask[size]; + if (pci_master_aborts) { + pci_master_aborts = 0; + *value = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return PCIBIOS_SUCCESSFUL; +} + +/* + * We don't do error checks by callling clear_master_aborts() b/c the + * assumption is that the caller did a read first to make sure a device + * exists. + */ +int ixp2000_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 value) +{ + u32 mask; + u32 *addr; + u32 temp; + + mask = ~(bytemask[size] << ((where % 0x4) * 8)); + addr = ixp2000_pci_config_addr(bus->number, devfn, where); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + temp = (u32) (value) << ((where % 0x4) * 8); + *addr = (*addr & mask) | temp; + + clear_master_aborts(); + + return PCIBIOS_SUCCESSFUL; +} + + +static struct pci_ops ixp2000_pci_ops = { + .read = ixp2000_pci_read_config, + .write = ixp2000_pci_write_config +}; + +struct pci_bus *ixp2000_pci_scan_bus(int nr, struct pci_sys_data *sysdata) +{ + return pci_scan_bus(sysdata->busnr, &ixp2000_pci_ops, sysdata); +} + + +int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + + volatile u32 temp; + unsigned long flags; + + pci_master_aborts = 1; + + local_irq_save(flags); + temp = *(IXP2000_PCI_CONTROL); + if (temp & ((1 << 8) | (1 << 5))) { + ixp2000_reg_write(IXP2000_PCI_CONTROL, temp); + } + + temp = *(IXP2000_PCI_CMDSTAT); + if (temp & (1 << 29)) { + while (temp & (1 << 29)) { + ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp); + temp = *(IXP2000_PCI_CMDSTAT); + } + } + local_irq_restore(flags); + + /* + * If it was an imprecise abort, then we need to correct the + * return address to be _after_ the instruction. + */ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; + + return 0; +} + +int +clear_master_aborts(void) +{ + volatile u32 temp; + unsigned long flags; + + local_irq_save(flags); + temp = *(IXP2000_PCI_CONTROL); + if (temp & ((1 << 8) | (1 << 5))) { + ixp2000_reg_write(IXP2000_PCI_CONTROL, temp); + } + + temp = *(IXP2000_PCI_CMDSTAT); + if (temp & (1 << 29)) { + while (temp & (1 << 29)) { + ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp); + temp = *(IXP2000_PCI_CMDSTAT); + } + } + local_irq_restore(flags); + + return 0; +} + +void __init +ixp2000_pci_preinit(void) +{ + hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, + "PCI config cycle to non-existent device"); +} + + +/* + * IXP2000 systems often have large resource requirements, so we just + * use our own resource space. + */ +static struct resource ixp2000_pci_mem_space = { + .start = 0x00000000, + .end = 0xffffffff, + .flags = IORESOURCE_MEM, + .name = "PCI Mem Space" +}; + +static struct resource ixp2000_pci_io_space = { + .start = 0x00000000, + .end = 0xffffffff, + .flags = IORESOURCE_IO, + .name = "PCI I/O Space" +}; + +int ixp2000_pci_setup(int nr, struct pci_sys_data *sys) +{ + if (nr >= 1) + return 0; + + sys->resource[0] = &ixp2000_pci_io_space; + sys->resource[1] = &ixp2000_pci_mem_space; + sys->resource[2] = NULL; + + return 1; +} + |