diff options
Diffstat (limited to 'arch/arm/mach-integrator')
-rw-r--r-- | arch/arm/mach-integrator/core.c | 57 | ||||
-rw-r--r-- | arch/arm/mach-integrator/integrator_ap.c | 135 | ||||
-rw-r--r-- | arch/arm/mach-integrator/integrator_cp.c | 173 | ||||
-rw-r--r-- | arch/arm/mach-integrator/pci_v3.c | 122 |
4 files changed, 24 insertions, 463 deletions
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index c07c821..4698942 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -34,63 +34,6 @@ #include "common.h" -#ifdef CONFIG_ATAGS - -#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT } -#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 } -#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 } -#define KMI0_IRQ { IRQ_KMIINT0 } -#define KMI1_IRQ { IRQ_KMIINT1 } - -static AMBA_APB_DEVICE(rtc, "rtc", 0, - INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL); - -static AMBA_APB_DEVICE(uart0, "uart0", 0, - INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, NULL); - -static AMBA_APB_DEVICE(uart1, "uart1", 0, - INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, NULL); - -static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL); -static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL); - -static struct amba_device *amba_devs[] __initdata = { - &rtc_device, - &uart0_device, - &uart1_device, - &kmi0_device, - &kmi1_device, -}; - -int __init integrator_init(bool is_cp) -{ - int i; - - /* - * The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to - * hard-code them. The Integator/CP and forward have proper cell IDs. - * Else we leave them undefined to the bus driver can autoprobe them. - */ - if (!is_cp && IS_ENABLED(CONFIG_ARCH_INTEGRATOR_AP)) { - rtc_device.periphid = 0x00041030; - uart0_device.periphid = 0x00041010; - uart1_device.periphid = 0x00041010; - kmi0_device.periphid = 0x00041050; - kmi1_device.periphid = 0x00041050; - uart0_device.dev.platform_data = &ap_uart_data; - uart1_device.dev.platform_data = &ap_uart_data; - } - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } - - return 0; -} - -#endif - static DEFINE_RAW_SPINLOCK(cm_lock); /** diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index f5fbd8a..563f1c6 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -402,8 +402,6 @@ void __init ap_init_early(void) { } -#ifdef CONFIG_OF - static void __init ap_of_timer_init(void) { struct device_node *node; @@ -564,136 +562,3 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)") .restart = integrator_restart, .dt_compat = ap_dt_board_compat, MACHINE_END - -#endif - -#ifdef CONFIG_ATAGS - -/* - * For the ATAG boot some static mappings are needed. This will - * go away with the ATAG support down the road. - */ - -static struct map_desc ap_io_desc_atag[] __initdata = { - { - .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, -}; - -static void __init ap_map_io_atag(void) -{ - iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag)); - ap_map_io(); -} - -/* - * This is where non-devicetree initialization code is collected and stashed - * for eventual deletion. - */ - -static struct platform_device pci_v3_device = { - .name = "pci-v3", - .id = 0, -}; - -static struct resource cfi_flash_resource = { - .start = INTEGRATOR_FLASH_BASE, - .end = INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device cfi_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ap_flash_data, - }, - .num_resources = 1, - .resource = &cfi_flash_resource, -}; - -static void __init ap_timer_init(void) -{ - struct clk *clk; - unsigned long rate; - - clk = clk_get_sys("ap_timer", NULL); - BUG_ON(IS_ERR(clk)); - clk_prepare_enable(clk); - rate = clk_get_rate(clk); - - writel(0, TIMER0_VA_BASE + TIMER_CTRL); - writel(0, TIMER1_VA_BASE + TIMER_CTRL); - writel(0, TIMER2_VA_BASE + TIMER_CTRL); - - integrator_clocksource_init(rate, (void __iomem *)TIMER2_VA_BASE); - integrator_clockevent_init(rate, (void __iomem *)TIMER1_VA_BASE, - IRQ_TIMERINT1); -} - -#define INTEGRATOR_SC_VALID_INT 0x003fffff - -static void __init ap_init_irq(void) -{ - /* Disable all interrupts initially. */ - /* Do the core module ones */ - writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR); - - /* do the header card stuff next */ - writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR); - writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR); - - fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START, - -1, INTEGRATOR_SC_VALID_INT, NULL); - integrator_clk_init(false); -} - -static void __init ap_init(void) -{ - unsigned long sc_dec; - int i; - - platform_device_register(&pci_v3_device); - platform_device_register(&cfi_flash_device); - - ap_syscon_base = __io_address(INTEGRATOR_SC_BASE); - sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); - for (i = 0; i < 4; i++) { - struct lm_device *lmdev; - - if ((sc_dec & (16 << i)) == 0) - continue; - - lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL); - if (!lmdev) - continue; - - lmdev->resource.start = 0xc0000000 + 0x10000000 * i; - lmdev->resource.end = lmdev->resource.start + 0x0fffffff; - lmdev->resource.flags = IORESOURCE_MEM; - lmdev->irq = IRQ_AP_EXPINT0 + i; - lmdev->id = i; - - lm_device_register(lmdev); - } - - integrator_init(false); -} - -MACHINE_START(INTEGRATOR, "ARM-Integrator") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .reserve = integrator_reserve, - .map_io = ap_map_io_atag, - .init_early = ap_init_early, - .init_irq = ap_init_irq, - .handle_irq = fpga_handle_irq, - .init_time = ap_timer_init, - .init_machine = ap_init, - .restart = integrator_restart, -MACHINE_END - -#endif diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 8c60fcb..871c25d 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -249,7 +249,6 @@ static void __init intcp_init_early(void) #endif } -#ifdef CONFIG_OF static const struct of_device_id fpga_irq_of_match[] __initconst = { { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, }, { /* Sentinel */ } @@ -354,175 +353,3 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)") .restart = integrator_restart, .dt_compat = intcp_dt_board_compat, MACHINE_END - -#endif - -#ifdef CONFIG_ATAGS - -/* - * For the ATAG boot some static mappings are needed. This will - * go away with the ATAG support down the road. - */ - -static struct map_desc intcp_io_desc_atag[] __initdata = { - { - .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, -}; - -static void __init intcp_map_io_atag(void) -{ - iotable_init(intcp_io_desc_atag, ARRAY_SIZE(intcp_io_desc_atag)); - intcp_con_base = __io_address(INTEGRATOR_CP_CTL_BASE); - intcp_map_io(); -} - - -/* - * This is where non-devicetree initialization code is collected and stashed - * for eventual deletion. - */ - -#define INTCP_FLASH_SIZE SZ_32M - -static struct resource intcp_flash_resource = { - .start = INTCP_PA_FLASH_BASE, - .end = INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device intcp_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &intcp_flash_data, - }, - .num_resources = 1, - .resource = &intcp_flash_resource, -}; - -#define INTCP_ETH_SIZE 0x10 - -static struct resource smc91x_resources[] = { - [0] = { - .start = INTEGRATOR_CP_ETH_BASE, - .end = INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_CP_ETHINT, - .end = IRQ_CP_ETHINT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct platform_device *intcp_devs[] __initdata = { - &intcp_flash_device, - &smc91x_device, -}; - -#define INTCP_VA_CIC_BASE __io_address(INTEGRATOR_HDR_BASE + 0x40) -#define INTCP_VA_PIC_BASE __io_address(INTEGRATOR_IC_BASE) -#define INTCP_VA_SIC_BASE __io_address(INTEGRATOR_CP_SIC_BASE) - -static void __init intcp_init_irq(void) -{ - u32 pic_mask, cic_mask, sic_mask; - - /* These masks are for the HW IRQ registers */ - pic_mask = ~((~0u) << (11 - 0)); - pic_mask |= (~((~0u) << (29 - 22))) << 22; - cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)); - sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START)); - - /* - * Disable all interrupt sources - */ - writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR); - writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR); - writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR); - writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR); - writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR); - writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR); - - fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START, - -1, pic_mask, NULL); - - fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START, - -1, cic_mask, NULL); - - fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START, - IRQ_CP_CPPLDINT, sic_mask, NULL); - - integrator_clk_init(true); -} - -#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE) -#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE) -#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE) - -static void __init cp_timer_init(void) -{ - writel(0, TIMER0_VA_BASE + TIMER_CTRL); - writel(0, TIMER1_VA_BASE + TIMER_CTRL); - writel(0, TIMER2_VA_BASE + TIMER_CTRL); - - sp804_clocksource_init(TIMER2_VA_BASE, "timer2"); - sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1"); -} - -#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 } -#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT } - -static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE, - INTEGRATOR_CP_MMC_IRQS, &mmc_data); - -static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE, - INTEGRATOR_CP_AACI_IRQS, NULL); - -static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE, - { IRQ_CP_CLCDCINT }, &clcd_data); - -static struct amba_device *amba_devs[] __initdata = { - &mmc_device, - &aaci_device, - &clcd_device, -}; - -static void __init intcp_init(void) -{ - int i; - - platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs)); - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } - integrator_init(true); -} - -MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .reserve = integrator_reserve, - .map_io = intcp_map_io_atag, - .init_early = intcp_init_early, - .init_irq = intcp_init_irq, - .handle_irq = fpga_handle_irq, - .init_time = cp_timer_init, - .init_machine = intcp_init, - .restart = integrator_restart, -MACHINE_END - -#endif diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 2d10793..67406fc 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -809,32 +809,6 @@ static u8 __init pci_v3_swizzle(struct pci_dev *dev, u8 *pinp) return pci_common_swizzle(dev, pinp); } -static int irq_tab[4] __initdata = { - IRQ_AP_PCIINT0, IRQ_AP_PCIINT1, IRQ_AP_PCIINT2, IRQ_AP_PCIINT3 -}; - -/* - * map the specified device/slot/pin to an IRQ. This works out such - * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1. - */ -static int __init pci_v3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int intnr = ((slot - 9) + (pin - 1)) & 3; - - return irq_tab[intnr]; -} - -static struct hw_pci pci_v3 __initdata = { - .swizzle = pci_v3_swizzle, - .setup = pci_v3_setup, - .nr_controllers = 1, - .ops = &pci_v3_ops, - .preinit = pci_v3_preinit, - .postinit = pci_v3_postinit, -}; - -#ifdef CONFIG_OF - static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin) { struct of_irq oirq; @@ -851,14 +825,36 @@ static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin) oirq.size); } -static int __init pci_v3_dtprobe(struct platform_device *pdev, - struct device_node *np) +static struct hw_pci pci_v3 __initdata = { + .swizzle = pci_v3_swizzle, + .setup = pci_v3_setup, + .nr_controllers = 1, + .ops = &pci_v3_ops, + .preinit = pci_v3_preinit, + .postinit = pci_v3_postinit, +}; + +static int __init pci_v3_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct of_pci_range_parser parser; struct of_pci_range range; struct resource *res; int irq, ret; + /* Remap the Integrator system controller */ + ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); + if (!ap_syscon_base) { + dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n"); + return -ENODEV; + } + + /* Device tree probe path */ + if (!np) { + dev_err(&pdev->dev, "no device tree node for PCIv3\n"); + return -ENODEV; + } + if (of_pci_range_parser_init(&parser, np)) return -EINVAL; @@ -925,76 +921,6 @@ static int __init pci_v3_dtprobe(struct platform_device *pdev, return 0; } -#else - -static inline int pci_v3_dtprobe(struct platform_device *pdev, - struct device_node *np) -{ - return -EINVAL; -} - -#endif - -static int __init pci_v3_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - int ret; - - /* Remap the Integrator system controller */ - ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); - if (!ap_syscon_base) { - dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n"); - return -ENODEV; - } - - /* Device tree probe path */ - if (np) - return pci_v3_dtprobe(pdev, np); - - pci_v3_base = devm_ioremap(&pdev->dev, PHYS_PCI_V3_BASE, SZ_64K); - if (!pci_v3_base) { - dev_err(&pdev->dev, "unable to remap PCIv3 base\n"); - return -ENODEV; - } - - ret = devm_request_irq(&pdev->dev, IRQ_AP_V3INT, v3_irq, 0, "V3", NULL); - if (ret) { - dev_err(&pdev->dev, "unable to grab PCI error interrupt: %d\n", - ret); - return -ENODEV; - } - - conf_mem.name = "PCIv3 config"; - conf_mem.start = PHYS_PCI_CONFIG_BASE; - conf_mem.end = PHYS_PCI_CONFIG_BASE + SZ_16M - 1; - conf_mem.flags = IORESOURCE_MEM; - - io_mem.name = "PCIv3 I/O"; - io_mem.start = PHYS_PCI_IO_BASE; - io_mem.end = PHYS_PCI_IO_BASE + SZ_16M - 1; - io_mem.flags = IORESOURCE_MEM; - - non_mem_pci = 0x00000000; - non_mem_pci_sz = SZ_256M; - non_mem.name = "PCIv3 non-prefetched mem"; - non_mem.start = PHYS_PCI_MEM_BASE; - non_mem.end = PHYS_PCI_MEM_BASE + SZ_256M - 1; - non_mem.flags = IORESOURCE_MEM; - - pre_mem_pci = 0x10000000; - pre_mem_pci_sz = SZ_256M; - pre_mem.name = "PCIv3 prefetched mem"; - pre_mem.start = PHYS_PCI_PRE_BASE + SZ_256M; - pre_mem.end = PHYS_PCI_PRE_BASE + SZ_256M - 1; - pre_mem.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; - - pci_v3.map_irq = pci_v3_map_irq; - - pci_common_init_dev(&pdev->dev, &pci_v3); - - return 0; -} - static const struct of_device_id pci_ids[] = { { .compatible = "v3,v360epc-pci", }, {}, |