diff options
Diffstat (limited to 'arch/arm/mach-imx')
| -rw-r--r-- | arch/arm/mach-imx/Kconfig | 34 | ||||
| -rw-r--r-- | arch/arm/mach-imx/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-imx/clk-imx6sx.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c | 318 | ||||
| -rw-r--r-- | arch/arm/mach-imx/gpc.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-imx/headsmp.S | 1 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-cpuimx35.c | 206 |
7 files changed, 2 insertions, 564 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 3a3d3e9..388232c 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -444,40 +444,6 @@ config MACH_MX35_3DS Include support for MX35PDK platform. This includes specific configurations for the board and its peripherals. -config MACH_EUKREA_CPUIMX35SD - bool "Support Eukrea CPUIMX35 Platform" - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX35 - help - Include support for Eukrea CPUIMX35 platform. This includes - specific configurations for the board and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX35SD - default MACH_EUKREA_MBIMXSD35_BASEBOARD - -config MACH_EUKREA_MBIMXSD35_BASEBOARD - bool "Eukrea MBIMXSD development board" - select IMX_HAVE_PLATFORM_GPIO_KEYS - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - config MACH_VPR200 bool "Support VPR200 platform" select IMX_HAVE_PLATFORM_FSL_USB2_UDC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 3244cf1..eed6098 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -73,8 +73,6 @@ obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o # i.MX35 based machines obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c index 5a3e5a1..87c5b09 100644 --- a/arch/arm/mach-imx/clk-imx6sx.c +++ b/arch/arm/mach-imx/clk-imx6sx.c @@ -216,7 +216,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) clks[IMX6SX_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6); clks[IMX6SX_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6); - /* FIXME 100Mhz is used for pcie ref for all imx6 pcie, excepted imx6q */ + /* FIXME 100MHz is used for pcie ref for all imx6 pcie, excepted imx6q */ clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5); clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19); @@ -520,7 +520,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) pr_err("Failed to set pcie parent clk.\n"); /* - * Init enet system AHB clock, set to 200Mhz + * Init enet system AHB clock, set to 200MHz * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB */ clk_set_parent(clks[IMX6SX_CLK_ENET_PRE_SEL], clks[IMX6SX_CLK_PLL2_PFD2]); diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c deleted file mode 100644 index 6edc940..0000000 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ /dev/null @@ -1,318 +0,0 @@ -/* - * Copyright (C) 2010 Eric Benard - eric@eukrea.com - * - * Based on pcm970-baseboard.c which is : - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/types.h> -#include <linux/init.h> - -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/leds.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/spi/spi.h> -#include <video/platform_lcd.h> -#include <linux/i2c.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx35.h" -#include "hardware.h" -#include "iomux-mx35.h" - -static const struct fb_videomode fb_modedb[] = { - { - .name = "CMO-QVGA", - .refresh = 60, - .xres = 320, - .yres = 240, - .pixclock = KHZ2PICOS(6500), - .left_margin = 68, - .right_margin = 20, - .upper_margin = 15, - .lower_margin = 4, - .hsync_len = 30, - .vsync_len = 3, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, - { - .name = "DVI-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 32000, - .left_margin = 100, - .right_margin = 100, - .upper_margin = 7, - .lower_margin = 100, - .hsync_len = 7, - .vsync_len = 7, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, - { - .name = "DVI-SVGA", - .refresh = 60, - .xres = 800, - .yres = 600, - .pixclock = 25000, - .left_margin = 75, - .right_margin = 75, - .upper_margin = 7, - .lower_margin = 75, - .hsync_len = 7, - .vsync_len = 7, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -static struct mx3fb_platform_data mx3fb_pdata __initdata = { - .name = "CMO-QVGA", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = { - /* LCD */ - MX35_PAD_LD0__IPU_DISPB_DAT_0, - MX35_PAD_LD1__IPU_DISPB_DAT_1, - MX35_PAD_LD2__IPU_DISPB_DAT_2, - MX35_PAD_LD3__IPU_DISPB_DAT_3, - MX35_PAD_LD4__IPU_DISPB_DAT_4, - MX35_PAD_LD5__IPU_DISPB_DAT_5, - MX35_PAD_LD6__IPU_DISPB_DAT_6, - MX35_PAD_LD7__IPU_DISPB_DAT_7, - MX35_PAD_LD8__IPU_DISPB_DAT_8, - MX35_PAD_LD9__IPU_DISPB_DAT_9, - MX35_PAD_LD10__IPU_DISPB_DAT_10, - MX35_PAD_LD11__IPU_DISPB_DAT_11, - MX35_PAD_LD12__IPU_DISPB_DAT_12, - MX35_PAD_LD13__IPU_DISPB_DAT_13, - MX35_PAD_LD14__IPU_DISPB_DAT_14, - MX35_PAD_LD15__IPU_DISPB_DAT_15, - MX35_PAD_LD16__IPU_DISPB_DAT_16, - MX35_PAD_LD17__IPU_DISPB_DAT_17, - MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, - MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, - MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, - MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, - /* Backlight */ - MX35_PAD_CONTRAST__IPU_DISPB_CONTR, - /* LCD_PWR */ - MX35_PAD_D3_CLS__GPIO1_4, - /* LED */ - MX35_PAD_LD23__GPIO3_29, - /* SWITCH */ - MX35_PAD_LD19__GPIO3_25, - /* UART2 */ - MX35_PAD_CTS2__UART2_CTS, - MX35_PAD_RTS2__UART2_RTS, - MX35_PAD_TXD2__UART2_TXD_MUX, - MX35_PAD_RXD2__UART2_RXD_MUX, - /* I2S */ - MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS, - MX35_PAD_STXD4__AUDMUX_AUD4_TXD, - MX35_PAD_SRXD4__AUDMUX_AUD4_RXD, - MX35_PAD_SCK4__AUDMUX_AUD4_TXC, - /* CAN2 */ - MX35_PAD_TX5_RX0__CAN2_TXCAN, - MX35_PAD_TX4_RX1__CAN2_RXCAN, - /* SDCARD */ - MX35_PAD_SD1_CMD__ESDHC1_CMD, - MX35_PAD_SD1_CLK__ESDHC1_CLK, - MX35_PAD_SD1_DATA0__ESDHC1_DAT0, - MX35_PAD_SD1_DATA1__ESDHC1_DAT1, - MX35_PAD_SD1_DATA2__ESDHC1_DAT2, - MX35_PAD_SD1_DATA3__ESDHC1_DAT3, - /* SD1 CD */ - MX35_PAD_LD18__GPIO3_24, - /* SPI */ - MX35_PAD_CSPI1_MOSI__CSPI1_MOSI, - MX35_PAD_CSPI1_MISO__CSPI1_MISO, - MX35_PAD_CSPI1_SS0__GPIO1_18, - MX35_PAD_CSPI1_SS1__GPIO1_19, - MX35_PAD_CSPI1_SCLK__CSPI1_SCLK, - MX35_PAD_CSPI1_SPI_RDY__GPIO3_5, -}; - -#define GPIO_LED1 IMX_GPIO_NR(3, 29) -#define GPIO_SWITCH1 IMX_GPIO_NR(3, 25) -#define GPIO_LCDPWR IMX_GPIO_NR(1, 4) -#define GPIO_SD1CD IMX_GPIO_NR(3, 24) -#define GPIO_SPI1_SS0 IMX_GPIO_NR(1, 18) -#define GPIO_SPI1_SS1 IMX_GPIO_NR(1, 19) -#define GPIO_SPI1_IRQ IMX_GPIO_NR(3, 5) - -static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) - gpio_direction_output(GPIO_LCDPWR, 1); - else - gpio_direction_output(GPIO_LCDPWR, 0); -} - -static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = { - .set_power = eukrea_mbimxsd_lcd_power_set, -}; - -static struct platform_device eukrea_mbimxsd_lcd_powerdev = { - .name = "platform-lcd", - .dev.platform_data = &eukrea_mbimxsd_lcd_power_data, -}; - -static struct gpio_led eukrea_mbimxsd_leds[] = { - { - .name = "led1", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = GPIO_LED1, - }, -}; - -static const struct gpio_led_platform_data - eukrea_mbimxsd_led_info __initconst = { - .leds = eukrea_mbimxsd_leds, - .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds), -}; - -static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { - { - .gpio = GPIO_SWITCH1, - .code = BTN_0, - .desc = "BP1", - .active_low = 1, - .wakeup = 1, - }, -}; - -static const struct gpio_keys_platform_data - eukrea_mbimxsd_button_data __initconst = { - .buttons = eukrea_mbimxsd_gpio_buttons, - .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons), -}; - -static struct platform_device *platform_devices[] __initdata = { - &eukrea_mbimxsd_lcd_powerdev, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -static const -struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { - .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, -}; - -static struct esdhc_platform_data sd1_pdata = { - .cd_gpio = GPIO_SD1CD, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_NONE, -}; - -static struct spi_board_info eukrea_mbimxsd35_spi_board_info[] __initdata = { - { - .modalias = "spidev", - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_0, - }, - { - .modalias = "spidev", - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_0, - }, -}; - -static int eukrea_mbimxsd35_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1}; - -static const struct spi_imx_master eukrea_mbimxsd35_spi0_data __initconst = { - .chipselect = eukrea_mbimxsd35_spi_cs, - .num_chipselect = ARRAY_SIZE(eukrea_mbimxsd35_spi_cs), -}; - -/* - * system init for baseboard usage. Will be called by cpuimx35 init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init eukrea_mbimxsd35_baseboard_init(void) -{ - if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads, - ARRAY_SIZE(eukrea_mbimxsd_pads))) - printk(KERN_ERR "error setting mbimxsd pads !\n"); - - imx35_add_imx_uart1(&uart_pdata); - imx35_add_ipu_core(); - imx35_add_mx3_sdc_fb(&mx3fb_pdata); - - imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); - - imx35_add_flexcan1(); - imx35_add_sdhci_esdhc_imx(0, &sd1_pdata); - - gpio_request(GPIO_LED1, "LED1"); - gpio_direction_output(GPIO_LED1, 1); - gpio_free(GPIO_LED1); - - gpio_request(GPIO_SWITCH1, "SWITCH1"); - gpio_direction_input(GPIO_SWITCH1); - gpio_free(GPIO_SWITCH1); - - gpio_request(GPIO_LCDPWR, "LCDPWR"); - gpio_direction_output(GPIO_LCDPWR, 1); - - i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, - ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); - - gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ"); - gpio_direction_input(GPIO_SPI1_IRQ); - gpio_free(GPIO_SPI1_IRQ); - imx35_add_spi_imx0(&eukrea_mbimxsd35_spi0_data); - spi_register_board_info(eukrea_mbimxsd35_spi_board_info, - ARRAY_SIZE(eukrea_mbimxsd35_spi_board_info)); - - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); - imx_add_gpio_keys(&eukrea_mbimxsd_button_data); - imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); -} diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 6d0893a..0ea77ed 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -474,7 +474,6 @@ static const struct of_device_id imx_gpc_dt_ids[] = { static struct platform_driver imx_gpc_driver = { .driver = { .name = "imx-gpc", - .owner = THIS_MODULE, .of_match_table = imx_gpc_dt_ids, }, .probe = imx_gpc_probe, diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index de5047c..b5e9768 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -25,7 +25,6 @@ diag_reg_offset: .endm ENTRY(v7_secondary_startup) - bl v7_invalidate_l1 set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c deleted file mode 100644 index 922ffd6..0000000 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Copyright (C) 2010 Eric Benard - eric@eukrea.com - * Copyright (C) 2009 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> - -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/memory.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/i2c/tsc2007.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/i2c-gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx35.h" -#include "ehci.h" -#include "eukrea-baseboards.h" -#include "hardware.h" -#include "iomux-mx35.h" - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data - eukrea_cpuimx35_i2c0_data __initconst = { - .bitrate = 100000, -}; - -#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2) -static int tsc2007_get_pendown_state(struct device *dev) -{ - return !gpio_get_value(TSC2007_IRQGPIO); -} - -static struct tsc2007_platform_data tsc2007_info = { - .model = 2007, - .x_plate_ohms = 180, - .get_pendown_state = tsc2007_get_pendown_state, -}; - -static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, { - I2C_BOARD_INFO("tsc2007", 0x48), - .platform_data = &tsc2007_info, - /* irq number is run-time assigned */ - }, -}; - -static const iomux_v3_cfg_t eukrea_cpuimx35_pads[] __initconst = { - /* UART1 */ - MX35_PAD_CTS1__UART1_CTS, - MX35_PAD_RTS1__UART1_RTS, - MX35_PAD_TXD1__UART1_TXD_MUX, - MX35_PAD_RXD1__UART1_RXD_MUX, - /* FEC */ - MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, - MX35_PAD_FEC_RX_DV__FEC_RX_DV, - MX35_PAD_FEC_COL__FEC_COL, - MX35_PAD_FEC_RDATA0__FEC_RDATA_0, - MX35_PAD_FEC_TDATA0__FEC_TDATA_0, - MX35_PAD_FEC_TX_EN__FEC_TX_EN, - MX35_PAD_FEC_MDC__FEC_MDC, - MX35_PAD_FEC_MDIO__FEC_MDIO, - MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, - MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, - MX35_PAD_FEC_CRS__FEC_CRS, - MX35_PAD_FEC_RDATA1__FEC_RDATA_1, - MX35_PAD_FEC_TDATA1__FEC_TDATA_1, - MX35_PAD_FEC_RDATA2__FEC_RDATA_2, - MX35_PAD_FEC_TDATA2__FEC_TDATA_2, - MX35_PAD_FEC_RDATA3__FEC_RDATA_3, - MX35_PAD_FEC_TDATA3__FEC_TDATA_3, - /* I2C1 */ - MX35_PAD_I2C1_CLK__I2C1_SCL, - MX35_PAD_I2C1_DAT__I2C1_SDA, - /* TSC2007 IRQ */ - MX35_PAD_ATA_DA2__GPIO3_2, -}; - -static const struct mxc_nand_platform_data - eukrea_cpuimx35_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static int eukrea_cpuimx35_otg_init(struct platform_device *pdev) -{ - return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static const struct mxc_usbh_platform_data otg_pdata __initconst = { - .init = eukrea_cpuimx35_otg_init, - .portsc = MXC_EHCI_MODE_UTMI, -}; - -static int eukrea_cpuimx35_usbh1_init(struct platform_device *pdev) -{ - return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | - MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN); -} - -static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { - .init = eukrea_cpuimx35_usbh1_init, - .portsc = MXC_EHCI_MODE_SERIAL, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI, - .workaround = FLS_USB2_WORKAROUND_ENGCM09152, -}; - -static bool otg_mode_host __initdata; - -static int __init eukrea_cpuimx35_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", eukrea_cpuimx35_otg_mode); - -/* - * Board specific initialization. - */ -static void __init eukrea_cpuimx35_init(void) -{ - imx35_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads, - ARRAY_SIZE(eukrea_cpuimx35_pads)); - - imx35_add_fec(NULL); - imx35_add_imx2_wdt(); - - imx35_add_imx_uart0(&uart_pdata); - imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info); - - eukrea_cpuimx35_i2c_devices[1].irq = gpio_to_irq(TSC2007_IRQGPIO); - i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices, - ARRAY_SIZE(eukrea_cpuimx35_i2c_devices)); - imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data); - - if (otg_mode_host) - imx35_add_mxc_ehci_otg(&otg_pdata); - else - imx35_add_fsl_usb2_udc(&otg_device_pdata); - - imx35_add_mxc_ehci_hs(&usbh1_pdata); - -#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD - eukrea_mbimxsd35_baseboard_init(); -#endif -} - -static void __init eukrea_cpuimx35_timer_init(void) -{ - mx35_clocks_init(); -} - -MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") - /* Maintainer: Eukrea Electromatique */ - .atag_offset = 0x100, - .map_io = mx35_map_io, - .init_early = imx35_init_early, - .init_irq = mx35_init_irq, - .init_time = eukrea_cpuimx35_timer_init, - .init_machine = eukrea_cpuimx35_init, - .restart = mxc_restart, -MACHINE_END |
