diff options
Diffstat (limited to 'arch/arm/mach-imx')
25 files changed, 322 insertions, 233 deletions
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 2636adf..cab1289 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o +obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o endif ifdef CONFIG_SND_IMX_SOC diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index bcca481..c4436d9 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -104,7 +104,7 @@ void imx_anatop_init(void); void imx_anatop_pre_suspend(void); void imx_anatop_post_resume(void); int imx6_set_lpm(enum mxc_cpu_pwr_mode mode); -void imx6q_set_int_mem_clk_lpm(bool enable); +void imx6_set_int_mem_clk_lpm(bool enable); void imx6sl_set_wait_clk(bool enter); int imx_mmdc_get_ddr_type(void); diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index db0f48c..bfeb25a 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -85,7 +85,7 @@ EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_unused); int __init imx6q_cpuidle_init(void) { /* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */ - imx6q_set_int_mem_clk_lpm(true); + imx6_set_int_mem_clk_lpm(true); return cpuidle_register(&imx6q_cpuidle_driver, NULL); } diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c index 3c6672b..c5a5c3a 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sx.c +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c @@ -9,6 +9,7 @@ #include <linux/cpuidle.h> #include <linux/cpu_pm.h> #include <linux/module.h> +#include <asm/cacheflush.h> #include <asm/cpuidle.h> #include <asm/suspend.h> @@ -17,6 +18,15 @@ static int imx6sx_idle_finish(unsigned long val) { + /* + * for Cortex-A7 which has an internal L2 + * cache, need to flush it before powering + * down ARM platform, since flushing L1 cache + * here again has very small overhead, compared + * to adding conditional code for L2 cache type, + * just call flush_cache_all() is fine. + */ + flush_cache_all(); cpu_do_idle(); return 0; @@ -90,6 +100,7 @@ static struct cpuidle_driver imx6sx_cpuidle_driver = { int __init imx6sx_cpuidle_init(void) { + imx6_set_int_mem_clk_lpm(true); imx6_enable_rbc(false); /* * set ARM power up/down timing to the fastest, diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index eaee47a..17a97ba 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -493,24 +493,12 @@ static void __init armadillo5x0_init(void) regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - armadillo5x0_smc911x_resources[1].start = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); - armadillo5x0_smc911x_resources[1].end = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); - platform_add_devices(devices, ARRAY_SIZE(devices)); - imx_add_gpio_keys(&armadillo5x0_button_data); imx31_add_imx_i2c1(NULL); /* Register UART */ imx31_add_imx_uart0(&uart_pdata); imx31_add_imx_uart1(&uart_pdata); - /* SMSC9118 IRQ pin */ - gpio_direction_input(MX31_PIN_GPIO1_0); - - /* Register SDHC */ - imx31_add_mxc_mmc(0, &sdhc_pdata); - /* Register FB */ imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&mx3fb_pdata); @@ -527,21 +515,39 @@ static void __init armadillo5x0_init(void) /* set NAND page size to 2k if not configured via boot mode pins */ imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30), mx3_ccm_base + MXC_CCM_RCSR); +} + +static void __init armadillo5x0_late(void) +{ + armadillo5x0_smc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); + armadillo5x0_smc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); + platform_add_devices(devices, ARRAY_SIZE(devices)); + + imx_add_gpio_keys(&armadillo5x0_button_data); + + /* SMSC9118 IRQ pin */ + gpio_direction_input(MX31_PIN_GPIO1_0); + + /* Register SDHC */ + imx31_add_mxc_mmc(0, &sdhc_pdata); /* RTC */ /* Get RTC IRQ and register the chip */ - if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) { - if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0) - armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO); + if (!gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc")) { + if (!gpio_direction_input(ARMADILLO5X0_RTC_GPIO)) + armadillo5x0_i2c_rtc.irq = + gpio_to_irq(ARMADILLO5X0_RTC_GPIO); else gpio_free(ARMADILLO5X0_RTC_GPIO); } + if (armadillo5x0_i2c_rtc.irq == 0) pr_warn("armadillo5x0_init: failed to get RTC IRQ\n"); i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1); /* USB */ - usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); if (usbotg_pdata.otg) @@ -565,5 +571,6 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500") .init_irq = mx31_init_irq, .init_time = armadillo5x0_timer_init, .init_machine = armadillo5x0_init, + .init_late = armadillo5x0_late, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index ede2bdb..dd75a47 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -540,7 +540,6 @@ static void __init visstrim_m10_revision(void) static void __init visstrim_m10_board_init(void) { int ret; - int mo_version; imx27_soc_init(); visstrim_m10_revision(); @@ -550,11 +549,6 @@ static void __init visstrim_m10_board_init(void) if (ret) pr_err("Failed to setup pins (%d)\n", ret); - ret = gpio_request_array(visstrim_m10_gpios, - ARRAY_SIZE(visstrim_m10_gpios)); - if (ret) - pr_err("Failed to request gpios (%d)\n", ret); - imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); @@ -566,12 +560,26 @@ static void __init visstrim_m10_board_init(void) imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata); imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata); imx27_add_fec(NULL); - imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init visstrim_m10_late_init(void) +{ + int mo_version, ret; + + ret = gpio_request_array(visstrim_m10_gpios, + ARRAY_SIZE(visstrim_m10_gpios)); + if (ret) + pr_err("Failed to request gpios (%d)\n", ret); + + imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); + imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata, sizeof(snd_mx27vis_pdata)); platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, &iclink_tvp5150, sizeof(iclink_tvp5150)); + gpio_led_register_device(0, &visstrim_m10_led_data); /* Use mother board version to decide what video devices we shall use */ @@ -591,6 +599,7 @@ static void __init visstrim_m10_board_init(void) visstrim_deinterlace_init(); visstrim_analog_camera_init(); } + visstrim_coda_init(); } @@ -607,5 +616,6 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") .init_irq = mx27_init_irq, .init_time = visstrim_m10_timer_init, .init_machine = visstrim_m10_board_init, + .init_late = visstrim_m10_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index 6bb7d9c..58a2b88 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -16,6 +16,7 @@ #include <asm/mach/map.h> #include "common.h" +#include "cpuidle.h" static void __init imx6ul_enet_clk_init(void) { @@ -80,6 +81,8 @@ static void __init imx6ul_init_irq(void) static void __init imx6ul_init_late(void) { + imx6sx_cpuidle_init(); + if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); } diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index e277d9c..ab847e2 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -245,13 +245,17 @@ static void __init kzm_board_init(void) mxc_iomux_setup_multiple_pins(kzm_pins, ARRAY_SIZE(kzm_pins), "kzm"); - kzm_init_ext_uart(); - kzm_init_smsc9118(); kzm_init_imx_uart(); pr_info("Clock input source is 26MHz\n"); } +static void __init kzm_late_init(void) +{ + kzm_init_ext_uart(); + kzm_init_smsc9118(); +} + /* * This structure defines static mappings for the kzm-arm11-01 board. */ @@ -291,5 +295,6 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") .init_irq = mx31_init_irq, .init_time = kzm_timer_init, .init_machine = kzm_board_init, + .init_late = kzm_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 9986f9a..5e36682 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -302,12 +302,16 @@ static void __init mx21ads_board_init(void) imx21_add_imx_uart0(&uart_pdata_rts); imx21_add_imx_uart2(&uart_pdata_norts); imx21_add_imx_uart3(&uart_pdata_rts); - imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata); imx21_add_mxc_nand(&mx21ads_nand_board_info); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx21_add_imx_fb(&mx21ads_fb_data); +} + +static void __init mx21ads_late_init(void) +{ + imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); mx21ads_cs8900_resources[1].start = gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO); @@ -328,6 +332,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS") .init_early = imx21_init_early, .init_irq = mx21_init_irq, .init_time = mx21ads_timer_init, - .init_machine = mx21ads_board_init, + .init_machine = mx21ads_board_init, + .init_late = mx21ads_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 9ef4640..7ba651a 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -485,17 +485,32 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = { static void __init mx27pdk_init(void) { - int ret; imx27_soc_init(); mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), "mx27pdk"); - mx27_3ds_sdhc1_enable_level_translator(); imx27_add_imx_uart0(&uart_pdata); imx27_add_fec(NULL); imx27_add_imx_keypad(&mx27_3ds_keymap_data); - imx27_add_mxc_mmc(0, &sdhc1_pdata); imx27_add_imx2_wdt(); + + imx27_add_spi_imx1(&spi2_pdata); + imx27_add_spi_imx0(&spi1_pdata); + + imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); + platform_add_devices(devices, ARRAY_SIZE(devices)); + imx27_add_imx_fb(&mx27_3ds_fb_data); + + imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata); +} + +static void __init mx27pdk_late_init(void) +{ + int ret; + + mx27_3ds_sdhc1_enable_level_translator(); + imx27_add_mxc_mmc(0, &sdhc1_pdata); + otg_phy_init(); if (otg_mode_host) { @@ -509,17 +524,12 @@ static void __init mx27pdk_init(void) if (!otg_mode_host) imx27_add_fsl_usb2_udc(&otg_device_pdata); - imx27_add_spi_imx1(&spi2_pdata); - imx27_add_spi_imx0(&spi1_pdata); mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT); spi_register_board_info(mx27_3ds_spi_devs, - ARRAY_SIZE(mx27_3ds_spi_devs)); + ARRAY_SIZE(mx27_3ds_spi_devs)); if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28))) pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); - imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); - platform_add_devices(devices, ARRAY_SIZE(devices)); - imx27_add_imx_fb(&mx27_3ds_fb_data); ret = gpio_request_array(mx27_3ds_camera_gpios, ARRAY_SIZE(mx27_3ds_camera_gpios)); @@ -529,7 +539,6 @@ static void __init mx27pdk_init(void) } imx27_add_mx2_camera(&mx27_3ds_cam_pdata); - imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata); imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); } @@ -547,5 +556,6 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK") .init_irq = mx27_init_irq, .init_time = mx27pdk_timer_init, .init_machine = mx27pdk_init, + .init_late = mx27pdk_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index a4c389e..a04bb09 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -352,14 +352,20 @@ static void __init mx27ads_board_init(void) i2c_register_board_info(1, mx27ads_i2c_devices, ARRAY_SIZE(mx27ads_i2c_devices)); imx27_add_imx_i2c(1, &mx27ads_i2c1_data); - mx27ads_regulator_init(); imx27_add_imx_fb(&mx27ads_fb_data); + + imx27_add_fec(NULL); + imx27_add_mxc_w1(); +} + +static void __init mx27ads_late_init(void) +{ + mx27ads_regulator_init(); + imx27_add_mxc_mmc(0, &sdhc1_pdata); imx27_add_mxc_mmc(1, &sdhc2_pdata); - imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_mxc_w1(); } static void __init mx27ads_timer_init(void) @@ -395,5 +401,6 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS") .init_irq = mx27_init_irq, .init_time = mx27ads_timer_init, .init_machine = mx27ads_board_init, + .init_late = mx27ads_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 65a0dc0..12b8a52 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -694,8 +694,6 @@ static struct platform_device *devices[] __initdata = { static void __init mx31_3ds_init(void) { - int ret; - imx31_soc_init(); /* Configure SPI1 IOMUX */ @@ -708,14 +706,31 @@ static void __init mx31_3ds_init(void) imx31_add_mxc_nand(&mx31_3ds_nand_board_info); imx31_add_spi_imx1(&spi1_pdata); + + imx31_add_imx_keypad(&mx31_3ds_keymap_data); + + imx31_add_imx2_wdt(); + imx31_add_imx_i2c0(&mx31_3ds_i2c0_data); + + imx31_add_spi_imx0(&spi0_pdata); + imx31_add_ipu_core(); + imx31_add_mx3_sdc_fb(&mx3fb_pdata); + + imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata); + + imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); +} + +static void __init mx31_3ds_late(void) +{ + int ret; + mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(mx31_3ds_spi_devs, - ARRAY_SIZE(mx31_3ds_spi_devs)); + ARRAY_SIZE(mx31_3ds_spi_devs)); platform_add_devices(devices, ARRAY_SIZE(devices)); - imx31_add_imx_keypad(&mx31_3ds_keymap_data); - mx31_3ds_usbotg_init(); if (otg_mode_host) { otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | @@ -733,14 +748,9 @@ static void __init mx31_3ds_init(void) if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1))) printk(KERN_WARNING "Init of the debug board failed, all " - "devices on the debug board are unusable.\n"); - imx31_add_imx2_wdt(); - imx31_add_imx_i2c0(&mx31_3ds_i2c0_data); - imx31_add_mxc_mmc(0, &sdhc1_pdata); + "devices on the debug board are unusable.\n"); - imx31_add_spi_imx0(&spi0_pdata); - imx31_add_ipu_core(); - imx31_add_mx3_sdc_fb(&mx3fb_pdata); + imx31_add_mxc_mmc(0, &sdhc1_pdata); /* CSI */ /* Camera power: default - off */ @@ -752,10 +762,6 @@ static void __init mx31_3ds_init(void) } mx31_3ds_init_camera(); - - imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata); - - imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); } static void __init mx31_3ds_timer_init(void) @@ -778,6 +784,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .init_irq = mx31_init_irq, .init_time = mx31_3ds_timer_init, .init_machine = mx31_3ds_init, + .init_late = mx31_3ds_late, .reserve = mx31_3ds_reserve, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 4f2c56d..766b8b9 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -554,20 +554,19 @@ static void __init mx31ads_map_io(void) iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc)); } -static void __init mx31ads_init_irq(void) -{ - mx31_init_irq(); - mx31ads_init_expio(); -} - static void __init mx31ads_init(void) { imx31_soc_init(); - mxc_init_extuart(); mxc_init_imx_uart(); - mxc_init_i2c(); mxc_init_audio(); +} + +static void __init mx31ads_late(void) +{ + mx31ads_init_expio(); + mxc_init_extuart(); + mxc_init_i2c(); mxc_init_ext_ethernet(); } @@ -581,8 +580,9 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS") .atag_offset = 0x100, .map_io = mx31ads_map_io, .init_early = imx31_init_early, - .init_irq = mx31ads_init_irq, + .init_irq = mx31_init_irq, .init_time = mx31ads_timer_init, .init_machine = mx31ads_init, + .init_late = mx31ads_late, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index e9549a3..6fd4636 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -56,6 +56,26 @@ * appropriate baseboard support code. */ +static unsigned int mx31lilly_pins[] __initdata = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + MX31_PIN_CSPI3_MOSI__RXD3, + MX31_PIN_CSPI3_MISO__TXD3, + MX31_PIN_CSPI3_SCLK__RTS3, + MX31_PIN_CSPI3_SPI_RDY__CTS3, +}; + +/* UART */ +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + /* SMSC ethernet support */ static struct resource smsc91x_resources[] = { @@ -252,16 +272,12 @@ static void __init mx31lilly_board_init(void) { imx31_soc_init(); - switch (mx31lilly_baseboard) { - case MX31LILLY_NOBOARD: - break; - case MX31LILLY_DB: - mx31lilly_db_init(); - break; - default: - printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n", - mx31lilly_baseboard); - } + mxc_iomux_setup_multiple_pins(mx31lilly_pins, + ARRAY_SIZE(mx31lilly_pins), "mx31lily"); + + imx31_add_imx_uart0(&uart_pdata); + imx31_add_imx_uart1(&uart_pdata); + imx31_add_imx_uart2(&uart_pdata); mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS"); @@ -284,10 +300,17 @@ static void __init mx31lilly_board_init(void) imx31_add_spi_imx0(&spi0_pdata); imx31_add_spi_imx1(&spi1_pdata); - mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); - spi_register_board_info(&mc13783_dev, 1); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); +} + +static void __init mx31lilly_late_init(void) +{ + if (mx31lilly_baseboard == MX31LILLY_DB) + mx31lilly_db_init(); + + mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); + spi_register_board_info(&mc13783_dev, 1); smsc91x_resources[1].start = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); @@ -310,6 +333,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131") .init_early = imx31_init_early, .init_irq = mx31_init_irq, .init_time = mx31lilly_timer_init, - .init_machine = mx31lilly_board_init, + .init_machine = mx31lilly_board_init, + .init_late = mx31lilly_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index 4822a17..f033a57 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -52,6 +52,19 @@ */ static unsigned int mx31lite_pins[] = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* SPI 0 */ + MX31_PIN_CSPI1_SCLK__SCLK, + MX31_PIN_CSPI1_MOSI__MOSI, + MX31_PIN_CSPI1_MISO__MISO, + MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI1_SS0__SS0, + MX31_PIN_CSPI1_SS1__SS1, + MX31_PIN_CSPI1_SS2__SS2, /* LAN9117 IRQ pin */ IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* SPI 1 */ @@ -64,6 +77,23 @@ static unsigned int mx31lite_pins[] = { MX31_PIN_CSPI2_SS2__SS2, }; +/* UART */ +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* SPI */ +static int spi0_internal_chipselect[] = { + MXC_SPI_CS(0), + MXC_SPI_CS(1), + MXC_SPI_CS(2), +}; + +static const struct spi_imx_master spi0_pdata __initconst = { + .chipselect = spi0_internal_chipselect, + .num_chipselect = ARRAY_SIZE(spi0_internal_chipselect), +}; + static const struct mxc_nand_platform_data mx31lite_nand_board_info __initconst = { .width = 1, @@ -103,13 +133,13 @@ static struct platform_device smsc911x_device = { * The MC13783 is the only hard-wired SPI device on the module. */ -static int spi_internal_chipselect[] = { +static int spi1_internal_chipselect[] = { MXC_SPI_CS(0), }; static const struct spi_imx_master spi1_pdata __initconst = { - .chipselect = spi_internal_chipselect, - .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), + .chipselect = spi1_internal_chipselect, + .num_chipselect = ARRAY_SIZE(spi1_internal_chipselect), }; static struct mc13xxx_platform_data mc13783_pdata __initdata = { @@ -200,8 +230,6 @@ static struct platform_device physmap_flash_device = { .num_resources = 1, }; - - /* * This structure defines the MX31 memory map. */ @@ -233,29 +261,30 @@ static struct regulator_consumer_supply dummy_supplies[] = { static void __init mx31lite_init(void) { - int ret; - imx31_soc_init(); - switch (mx31lite_baseboard) { - case MX31LITE_NOBOARD: - break; - case MX31LITE_DB: - mx31lite_db_init(); - break; - default: - printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n", - mx31lite_baseboard); - } - mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins), "mx31lite"); + imx31_add_imx_uart0(&uart_pdata); + imx31_add_spi_imx0(&spi0_pdata); + /* NOR and NAND flash */ platform_device_register(&physmap_flash_device); imx31_add_mxc_nand(&mx31lite_nand_board_info); imx31_add_spi_imx1(&spi1_pdata); + + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); +} + +static void __init mx31lite_late(void) +{ + int ret; + + if (mx31lite_baseboard == MX31LITE_DB) + mx31lite_db_init(); + mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(&mc13783_spi_dev, 1); @@ -265,8 +294,6 @@ static void __init mx31lite_init(void) if (usbh2_pdata.otg) imx31_add_mxc_ehci_hs(2, &usbh2_pdata); - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - /* SMSC9117 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); if (ret) @@ -294,5 +321,6 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") .init_irq = mx31_init_irq, .init_time = mx31lite_timer_init, .init_machine = mx31lite_init, + .init_late = mx31lite_late, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 4f2d998..cc86768 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -526,11 +526,9 @@ static void __init mx31moboard_init(void) "moboard"); platform_add_devices(devices, ARRAY_SIZE(devices)); - gpio_led_register_device(-1, &mx31moboard_led_pdata); imx31_add_imx2_wdt(); - moboard_uart0_init(); imx31_add_imx_uart0(&uart0_pdata); imx31_add_imx_uart4(&uart4_pdata); @@ -540,6 +538,19 @@ static void __init mx31moboard_init(void) imx31_add_spi_imx1(&moboard_spi1_pdata); imx31_add_spi_imx2(&moboard_spi2_pdata); + mx31moboard_init_cam(); + + imx31_add_imx_ssi(0, &moboard_ssi_pdata); + + pm_power_off = mx31moboard_poweroff; +} + +static void __init mx31moboard_late(void) +{ + gpio_led_register_device(-1, &mx31moboard_led_pdata); + + moboard_uart0_init(); + gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq"); gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); moboard_spi_board_info[0].irq = @@ -549,18 +560,11 @@ static void __init mx31moboard_init(void) imx31_add_mxc_mmc(0, &sdhc1_pdata); - mx31moboard_init_cam(); - usb_xcvr_reset(); - moboard_usbh2_init(); - imx31_add_imx_ssi(0, &moboard_ssi_pdata); - imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); - pm_power_off = mx31moboard_poweroff; - switch (mx31moboard_baseboard) { case MX31NOBOARD: break; @@ -601,5 +605,6 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") .init_irq = mx31_init_irq, .init_time = mx31moboard_timer_init, .init_machine = mx31moboard_init, + .init_late = mx31moboard_late, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 7e315f0..c8c2e09 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -555,8 +555,6 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { */ static void __init mx35_3ds_init(void) { - struct platform_device *imx35_fb_pdev; - imx35_soc_init(); mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); @@ -579,9 +577,6 @@ static void __init mx35_3ds_init(void) imx35_add_mxc_nand(&mx35pdk_nand_board_info); imx35_add_sdhci_esdhc_imx(0, NULL); - if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1))) - pr_warn("Init of the debugboard failed, all " - "devices on the debugboard are unusable.\n"); imx35_add_imx_i2c0(&mx35_3ds_i2c0_data); i2c_register_board_info( @@ -590,6 +585,15 @@ static void __init mx35_3ds_init(void) imx35_add_ipu_core(); platform_device_register(&mx35_3ds_ov2640); imx35_3ds_init_camera(); +} + +static void __init mx35_3ds_late_init(void) +{ + struct platform_device *imx35_fb_pdev; + + if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1))) + pr_warn("Init of the debugboard failed, all " + "devices on the debugboard are unusable.\n"); imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata); mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev; @@ -618,6 +622,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK") .init_irq = mx35_init_irq, .init_time = mx35pdk_timer_init, .init_machine = mx35_3ds_init, + .init_late = mx35_3ds_late_init, .reserve = mx35_3ds_reserve, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 2d1c50b..ed67586 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -362,12 +362,8 @@ static void __init pca100_init(void) if (ret) printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret); - imx27_add_imx_ssi(0, &pca100_ssi_pdata); - imx27_add_imx_uart0(&uart_pdata); - imx27_add_mxc_mmc(1, &sdhc_pdata); - imx27_add_mxc_nand(&pca100_nand_board_info); /* only the i2c master 1 is used on this CPU card */ @@ -382,6 +378,19 @@ static void __init pca100_init(void) ARRAY_SIZE(pca100_spi_board_info)); imx27_add_spi_imx0(&pca100_spi0_data); + imx27_add_imx_fb(&pca100_fb_data); + + imx27_add_fec(NULL); + imx27_add_imx2_wdt(); + imx27_add_mxc_w1(); +} + +static void __init pca100_late_init(void) +{ + imx27_add_imx_ssi(0, &pca100_ssi_pdata); + + imx27_add_mxc_mmc(1, &sdhc_pdata); + gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs"); gpio_direction_output(OTG_PHY_CS_GPIO, 1); gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs"); @@ -403,12 +412,6 @@ static void __init pca100_init(void) if (usbh2_pdata.otg) imx27_add_mxc_ehci_hs(2, &usbh2_pdata); - - imx27_add_imx_fb(&pca100_fb_data); - - imx27_add_fec(NULL); - imx27_add_imx2_wdt(); - imx27_add_mxc_w1(); } static void __init pca100_timer_init(void) @@ -421,7 +424,8 @@ MACHINE_START(PCA100, "phyCARD-i.MX27") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .init_machine = pca100_init, + .init_machine = pca100_init, + .init_late = pca100_late_init, .init_time = pca100_timer_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index a159a77..9f0f55b 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -576,8 +576,6 @@ static struct regulator_consumer_supply dummy_supplies[] = { */ static void __init pcm037_init(void) { - int ret; - imx31_soc_init(); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); @@ -621,20 +619,6 @@ static void __init pcm037_init(void) imx31_add_mxc_w1(); - /* LAN9217 IRQ pin */ - ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); - if (ret) - pr_warn("could not get LAN irq gpio\n"); - else { - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); - smsc911x_resources[1].start = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); - smsc911x_resources[1].end = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); - platform_device_register(&pcm037_eth); - } - - /* I2C adapters and devices */ i2c_register_board_info(1, pcm037_i2c_devices, ARRAY_SIZE(pcm037_i2c_devices)); @@ -643,26 +627,9 @@ static void __init pcm037_init(void) imx31_add_imx_i2c2(&pcm037_i2c2_data); imx31_add_mxc_nand(&pcm037_nand_board_info); - imx31_add_mxc_mmc(0, &sdhc_pdata); imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&mx3fb_pdata); - /* CSI */ - /* Camera power: default - off */ - ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power"); - if (!ret) - gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1); - else - iclink_mt9t031.power = NULL; - - pcm037_init_camera(); - - pcm970_sja1000_resources[1].start = - gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); - pcm970_sja1000_resources[1].end = - gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); - platform_device_register(&pcm970_sja1000); - if (otg_mode_host) { otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); @@ -677,7 +644,6 @@ static void __init pcm037_init(void) if (!otg_mode_host) imx31_add_fsl_usb2_udc(&otg_device_pdata); - } static void __init pcm037_timer_init(void) @@ -694,6 +660,39 @@ static void __init pcm037_reserve(void) static void __init pcm037_init_late(void) { + int ret; + + /* LAN9217 IRQ pin */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); + if (!ret) { + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + smsc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + smsc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + platform_device_register(&pcm037_eth); + } else { + pr_warn("could not get LAN irq gpio\n"); + } + + imx31_add_mxc_mmc(0, &sdhc_pdata); + + /* CSI */ + /* Camera power: default - off */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power"); + if (!ret) + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1); + else + iclink_mt9t031.power = NULL; + + pcm037_init_camera(); + + pcm970_sja1000_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); + pcm970_sja1000_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); + platform_device_register(&pcm970_sja1000); + pcm037_eet_init_devices(); } diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index e447e59..78e2bf8 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -363,7 +363,6 @@ static void __init pcm043_init(void) imx35_add_imx_uart0(&uart_pdata); imx35_add_mxc_nand(&pcm037_nand_board_info); - imx35_add_imx_ssi(0, &pcm043_ssi_pdata); imx35_add_imx_uart1(&uart_pdata); @@ -387,6 +386,12 @@ static void __init pcm043_init(void) imx35_add_fsl_usb2_udc(&otg_device_pdata); imx35_add_flexcan1(); +} + +static void __init pcm043_late_init(void) +{ + imx35_add_imx_ssi(0, &pcm043_ssi_pdata); + imx35_add_sdhci_esdhc_imx(0, &sd1_pdata); } @@ -402,6 +407,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043") .init_early = imx35_init_early, .init_irq = mx35_init_irq, .init_time = pcm043_timer_init, - .init_machine = pcm043_init, + .init_machine = pcm043_init, + .init_late = pcm043_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 34df64f..8c2cbd6 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -251,7 +251,6 @@ static void __init qong_init(void) mxc_init_imx_uart(); qong_init_nor_mtd(); - qong_init_fpga(); imx31_add_imx2_wdt(); } @@ -268,5 +267,6 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .init_irq = mx31_init_irq, .init_time = qong_timer_init, .init_machine = qong_init, + .init_late = qong_init_fpga, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 27a8f7e..5ff154c 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -268,6 +268,22 @@ static void __init vpr200_board_init(void) imx35_add_fec(NULL); imx35_add_imx2_wdt(); + + imx35_add_imx_uart0(NULL); + imx35_add_imx_uart2(NULL); + + imx35_add_ipu_core(); + imx35_add_mx3_sdc_fb(&mx3fb_pdata); + + imx35_add_fsl_usb2_udc(&otg_device_pdata); + imx35_add_mxc_ehci_hs(&usb_host_pdata); + + imx35_add_mxc_nand(&vpr200_nand_board_info); + imx35_add_sdhci_esdhc_imx(0, NULL); +} + +static void __init vpr200_late_init(void) +{ imx_add_gpio_keys(&vpr200_gpio_keys_data); platform_add_devices(devices, ARRAY_SIZE(devices)); @@ -282,18 +298,6 @@ static void __init vpr200_board_init(void) else gpio_direction_input(GPIO_PMIC_INT); - imx35_add_imx_uart0(NULL); - imx35_add_imx_uart2(NULL); - - imx35_add_ipu_core(); - imx35_add_mx3_sdc_fb(&mx3fb_pdata); - - imx35_add_fsl_usb2_udc(&otg_device_pdata); - imx35_add_mxc_ehci_hs(&usb_host_pdata); - - imx35_add_mxc_nand(&vpr200_nand_board_info); - imx35_add_sdhci_esdhc_imx(0, NULL); - vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT); i2c_register_board_info(0, vpr200_i2c_devices, ARRAY_SIZE(vpr200_i2c_devices)); @@ -313,5 +317,6 @@ MACHINE_START(VPR200, "VPR200") .init_irq = mx35_init_irq, .init_time = vpr200_timer_init, .init_machine = vpr200_board_init, + .init_late = vpr200_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c index 649fe49..231f900 100644 --- a/arch/arm/mach-imx/mx31lilly-db.c +++ b/arch/arm/mach-imx/mx31lilly-db.c @@ -43,18 +43,6 @@ */ static unsigned int lilly_db_board_pins[] __initdata = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, - MX31_PIN_CTS2__CTS2, - MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, - MX31_PIN_RXD2__RXD2, - MX31_PIN_CSPI3_MOSI__RXD3, - MX31_PIN_CSPI3_MISO__TXD3, - MX31_PIN_CSPI3_SCLK__RTS3, - MX31_PIN_CSPI3_SPI_RDY__CTS3, MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2, MX31_PIN_SD1_DATA1__SD1_DATA1, @@ -86,11 +74,6 @@ static unsigned int lilly_db_board_pins[] __initdata = { MX31_PIN_CONTRAST__CONTRAST, }; -/* UART */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - /* MMC support */ static int mxc_mmc1_get_ro(struct device *dev) @@ -203,9 +186,6 @@ void __init mx31lilly_db_init(void) mxc_iomux_setup_multiple_pins(lilly_db_board_pins, ARRAY_SIZE(lilly_db_board_pins), "development board pins"); - imx31_add_imx_uart0(&uart_pdata); - imx31_add_imx_uart1(&uart_pdata); - imx31_add_imx_uart2(&uart_pdata); imx31_add_mxc_mmc(0, &mmc_pdata); mx31lilly_init_fb(); } diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c index 5a160b7..c66a006 100644 --- a/arch/arm/mach-imx/mx31lite-db.c +++ b/arch/arm/mach-imx/mx31lite-db.c @@ -45,19 +45,6 @@ */ static unsigned int litekit_db_board_pins[] __initdata = { - /* UART1 */ - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, - /* SPI 0 */ - MX31_PIN_CSPI1_SCLK__SCLK, - MX31_PIN_CSPI1_MOSI__MOSI, - MX31_PIN_CSPI1_MISO__MISO, - MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI1_SS0__SS0, - MX31_PIN_CSPI1_SS1__SS1, - MX31_PIN_CSPI1_SS2__SS2, /* SDHC1 */ MX31_PIN_SD1_DATA0__SD1_DATA0, MX31_PIN_SD1_DATA1__SD1_DATA1, @@ -67,11 +54,6 @@ static unsigned int litekit_db_board_pins[] __initdata = { MX31_PIN_SD1_CMD__SD1_CMD, }; -/* UART */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - /* MMC */ static int gpio_det, gpio_wp; @@ -146,19 +128,6 @@ static const struct imxmmc_platform_data mmc_pdata __initconst = { .exit = mxc_mmc1_exit, }; -/* SPI */ - -static int spi_internal_chipselect[] = { - MXC_SPI_CS(0), - MXC_SPI_CS(1), - MXC_SPI_CS(2), -}; - -static const struct spi_imx_master spi0_pdata __initconst = { - .chipselect = spi_internal_chipselect, - .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), -}; - /* GPIO LEDs */ static const struct gpio_led litekit_leds[] __initconst = { @@ -187,9 +156,7 @@ void __init mx31lite_db_init(void) mxc_iomux_setup_multiple_pins(litekit_db_board_pins, ARRAY_SIZE(litekit_db_board_pins), "development board pins"); - imx31_add_imx_uart0(&uart_pdata); imx31_add_mxc_mmc(0, &mmc_pdata); - imx31_add_spi_imx0(&spi0_pdata); gpio_led_register_device(-1, &litekit_led_platform_data); imx31_add_imx2_wdt(); imx31_add_mxc_rtc(); diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index fe708e2..1515e49 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -217,7 +217,7 @@ struct imx6_cpu_pm_info { u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */ } __aligned(8); -void imx6q_set_int_mem_clk_lpm(bool enable) +void imx6_set_int_mem_clk_lpm(bool enable) { u32 val = readl_relaxed(ccm_base + CGPR); @@ -367,7 +367,7 @@ static int imx6q_pm_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_STANDBY: imx6_set_lpm(STOP_POWER_ON); - imx6q_set_int_mem_clk_lpm(true); + imx6_set_int_mem_clk_lpm(true); imx_gpc_pre_suspend(false); if (cpu_is_imx6sl()) imx6sl_set_wait_clk(true); @@ -380,7 +380,7 @@ static int imx6q_pm_enter(suspend_state_t state) break; case PM_SUSPEND_MEM: imx6_set_lpm(STOP_POWER_OFF); - imx6q_set_int_mem_clk_lpm(false); + imx6_set_int_mem_clk_lpm(false); imx6q_enable_wb(true); /* * For suspend into ocram, asm code already take care of @@ -398,7 +398,7 @@ static int imx6q_pm_enter(suspend_state_t state) imx_gpc_post_resume(); imx6_enable_rbc(false); imx6q_enable_wb(false); - imx6q_set_int_mem_clk_lpm(true); + imx6_set_int_mem_clk_lpm(true); imx6_set_lpm(WAIT_CLOCKED); break; default: |
