diff options
Diffstat (limited to 'arch/arm/mach-imx/mach-mx53_ard.c')
| -rw-r--r-- | arch/arm/mach-imx/mach-mx53_ard.c | 262 |
1 files changed, 262 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c new file mode 100644 index 0000000..753f4fc --- /dev/null +++ b/arch/arm/mach-imx/mach-mx53_ard.c @@ -0,0 +1,262 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/iomux-mx53.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "devices-imx53.h" + +#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31) +#define ARD_SD1_CD IMX_GPIO_NR(1, 1) +#define ARD_SD1_WP IMX_GPIO_NR(1, 9) +#define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3) +#define ARD_VOLUMEDOWN IMX_GPIO_NR(4, 0) +#define ARD_HOME IMX_GPIO_NR(5, 10) +#define ARD_BACK IMX_GPIO_NR(5, 11) +#define ARD_PROG IMX_GPIO_NR(5, 12) +#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13) + +static iomux_v3_cfg_t mx53_ard_pads[] = { + /* UART1 */ + MX53_PAD_PATA_DIOW__UART1_TXD_MUX, + MX53_PAD_PATA_DMACK__UART1_RXD_MUX, + /* WEIM for CS1 */ + MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */ + MX53_PAD_EIM_D16__EMI_WEIM_D_16, + MX53_PAD_EIM_D17__EMI_WEIM_D_17, + MX53_PAD_EIM_D18__EMI_WEIM_D_18, + MX53_PAD_EIM_D19__EMI_WEIM_D_19, + MX53_PAD_EIM_D20__EMI_WEIM_D_20, + MX53_PAD_EIM_D21__EMI_WEIM_D_21, + MX53_PAD_EIM_D22__EMI_WEIM_D_22, + MX53_PAD_EIM_D23__EMI_WEIM_D_23, + MX53_PAD_EIM_D24__EMI_WEIM_D_24, + MX53_PAD_EIM_D25__EMI_WEIM_D_25, + MX53_PAD_EIM_D26__EMI_WEIM_D_26, + MX53_PAD_EIM_D27__EMI_WEIM_D_27, + MX53_PAD_EIM_D28__EMI_WEIM_D_28, + MX53_PAD_EIM_D29__EMI_WEIM_D_29, + MX53_PAD_EIM_D30__EMI_WEIM_D_30, + MX53_PAD_EIM_D31__EMI_WEIM_D_31, + MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0, + MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1, + MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2, + MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3, + MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4, + MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5, + MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6, + MX53_PAD_EIM_OE__EMI_WEIM_OE, + MX53_PAD_EIM_RW__EMI_WEIM_RW, + MX53_PAD_EIM_CS1__EMI_WEIM_CS_1, + /* SDHC1 */ + MX53_PAD_SD1_CMD__ESDHC1_CMD, + MX53_PAD_SD1_CLK__ESDHC1_CLK, + MX53_PAD_SD1_DATA0__ESDHC1_DAT0, + MX53_PAD_SD1_DATA1__ESDHC1_DAT1, + MX53_PAD_SD1_DATA2__ESDHC1_DAT2, + MX53_PAD_SD1_DATA3__ESDHC1_DAT3, + MX53_PAD_PATA_DATA8__ESDHC1_DAT4, + MX53_PAD_PATA_DATA9__ESDHC1_DAT5, + MX53_PAD_PATA_DATA10__ESDHC1_DAT6, + MX53_PAD_PATA_DATA11__ESDHC1_DAT7, + MX53_PAD_GPIO_1__GPIO1_1, + MX53_PAD_GPIO_9__GPIO1_9, + /* I2C2 */ + MX53_PAD_EIM_EB2__I2C2_SCL, + MX53_PAD_KEY_ROW3__I2C2_SDA, + /* I2C3 */ + MX53_PAD_GPIO_3__I2C3_SCL, + MX53_PAD_GPIO_16__I2C3_SDA, + /* GPIO */ + MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */ + MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */ + MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */ + MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */ + MX53_PAD_GPIO_10__GPIO4_0, /* vol down */ +}; + +#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \ +{ \ + .gpio = gpio_num, \ + .type = EV_KEY, \ + .code = ev_code, \ + .active_low = act_low, \ + .desc = "btn " descr, \ + .wakeup = wake, \ +} + +static struct gpio_keys_button ard_buttons[] = { + GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0), + GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0), + GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0), + GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0), + GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0), +}; + +static const struct gpio_keys_platform_data ard_button_data __initconst = { + .buttons = ard_buttons, + .nbuttons = ARRAY_SIZE(ard_buttons), +}; + +static struct resource ard_smsc911x_resources[] = { + { + .start = MX53_CS1_64MB_BASE_ADDR, + .end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B), + .end = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B), + .flags = IORESOURCE_IRQ, + }, +}; + +struct smsc911x_platform_config ard_smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT, +}; + +static struct platform_device ard_smsc_lan9220_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(ard_smsc911x_resources), + .resource = ard_smsc911x_resources, + .dev = { + .platform_data = &ard_smsc911x_config, + }, +}; + +static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = { + .cd_gpio = ARD_SD1_CD, + .wp_gpio = ARD_SD1_WP, +}; + +static struct imxi2c_platform_data mx53_ard_i2c2_data = { + .bitrate = 50000, +}; + +static struct imxi2c_platform_data mx53_ard_i2c3_data = { + .bitrate = 400000, +}; + +static void __init mx53_ard_io_init(void) +{ + gpio_request(ARD_ETHERNET_INT_B, "eth-int-b"); + gpio_direction_input(ARD_ETHERNET_INT_B); + + gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst"); + gpio_direction_output(ARD_I2CPORTEXP_B, 1); +} + +/* Config CS1 settings for ethernet controller */ +static int weim_cs_config(void) +{ + u32 reg; + void __iomem *weim_base, *iomuxc_base; + + weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K); + if (!weim_base) + return -ENOMEM; + + iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K); + if (!iomuxc_base) { + iounmap(weim_base); + return -ENOMEM; + } + + /* CS1 timings for LAN9220 */ + writel(0x20001, (weim_base + 0x18)); + writel(0x0, (weim_base + 0x1C)); + writel(0x16000202, (weim_base + 0x20)); + writel(0x00000002, (weim_base + 0x24)); + writel(0x16002082, (weim_base + 0x28)); + writel(0x00000000, (weim_base + 0x2C)); + writel(0x00000000, (weim_base + 0x90)); + + /* specify 64 MB on CS1 and CS0 on GPR1 */ + reg = readl(iomuxc_base + 0x4); + reg &= ~0x3F; + reg |= 0x1B; + writel(reg, (iomuxc_base + 0x4)); + + iounmap(iomuxc_base); + iounmap(weim_base); + + return 0; +} + +void __init imx53_ard_common_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads, + ARRAY_SIZE(mx53_ard_pads)); + weim_cs_config(); +} + +static struct platform_device *devices[] __initdata = { + &ard_smsc_lan9220_device, +}; + +static void __init mx53_ard_board_init(void) +{ + imx53_soc_init(); + imx53_add_imx_uart(0, NULL); + + imx53_ard_common_init(); + mx53_ard_io_init(); + platform_add_devices(devices, ARRAY_SIZE(devices)); + + imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); + imx53_add_imx2_wdt(0, NULL); + imx53_add_imx_i2c(1, &mx53_ard_i2c2_data); + imx53_add_imx_i2c(2, &mx53_ard_i2c3_data); + imx_add_gpio_keys(&ard_button_data); + imx53_add_ahci_imx(); +} + +static void __init mx53_ard_timer_init(void) +{ + mx53_clocks_init(32768, 24000000, 22579200, 0); +} + +static struct sys_timer mx53_ard_timer = { + .init = mx53_ard_timer_init, +}; + +MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board") + .map_io = mx53_map_io, + .init_early = imx53_init_early, + .init_irq = mx53_init_irq, + .handle_irq = imx53_handle_irq, + .timer = &mx53_ard_timer, + .init_machine = mx53_ard_board_init, + .restart = mxc_restart, +MACHINE_END |
