summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-exynos/mach-armlex4210.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-exynos/mach-armlex4210.c')
-rw-r--r--arch/arm/mach-exynos/mach-armlex4210.c207
1 files changed, 0 insertions, 207 deletions
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
deleted file mode 100644
index 5f0f557..0000000
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-armlex4210.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/smsc911x.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/sdhci.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define ARMLEX4210_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define ARMLEX4210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_PERMANENT,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPX2(5),
- .ext_cd_gpio_invert = 1,
- .max_width = 4,
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_PERMANENT,
- .max_width = 4,
-};
-
-static void __init armlex4210_sdhci_init(void)
-{
- s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata);
- s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata);
- s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata);
-}
-
-static void __init armlex4210_wlan_init(void)
-{
- /* enable */
- s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP);
-
- /* reset */
- s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP);
-
- /* wakeup */
- s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP);
-}
-
-static struct resource armlex4210_smsc911x_resources[] = {
- [0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(3), SZ_64K),
- [1] = DEFINE_RES_NAMED(IRQ_EINT(27), 1, NULL, IORESOURCE_IRQ \
- | IRQF_TRIGGER_HIGH),
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device armlex4210_smsc911x = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(armlex4210_smsc911x_resources),
- .resource = armlex4210_smsc911x_resources,
- .dev = {
- .platform_data = &smsc9215_config,
- },
-};
-
-static struct platform_device *armlex4210_devices[] __initdata = {
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_rtc,
- &s3c_device_wdt,
- &armlex4210_smsc911x,
- &exynos4_device_ahci,
-};
-
-static void __init armlex4210_smsc911x_init(void)
-{
- u32 cs1;
-
- /* configure nCS1 width to 16 bits */
- cs1 = __raw_readl(S5P_SROM_BW) &
- ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
- (0 << S5P_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S5P_SROM_BW__ADDRMODE__SHIFT) |
- (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
- S5P_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S5P_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
- __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
- (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
- (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
- (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
- (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-static void __init armlex4210_map_io(void)
-{
- exynos_init_io(NULL, 0);
- s3c24xx_init_uarts(armlex4210_uartcfgs,
- ARRAY_SIZE(armlex4210_uartcfgs));
-}
-
-static void __init armlex4210_machine_init(void)
-{
- armlex4210_smsc911x_init();
-
- armlex4210_sdhci_init();
-
- armlex4210_wlan_init();
-
- platform_add_devices(armlex4210_devices,
- ARRAY_SIZE(armlex4210_devices));
-}
-
-MACHINE_START(ARMLEX4210, "ARMLEX4210")
- /* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = armlex4210_map_io,
- .init_machine = armlex4210_machine_init,
- .init_late = exynos_init_late,
- .init_time = exynos_init_time,
- .restart = exynos4_restart,
-MACHINE_END
OpenPOWER on IntegriCloud